AGES 3+
Thanks for
purchasing the
TM
SWEET LILY Castle.
Please read and retain
these instructions.
68779
Adult assembly
required.
WARNING:
KEEP ALL FLAME
AND HEAT SOURCES
AWAY FROM THE
TM
SWEET LILY CASTLE
FABRIC.
This Castle meets the
ꢀammability requirements of
CPAI-84. The fabric may burn
if left in continuous contact
with any ꢀame source. The
application of any foreign
substance to the Castle fabric
may render the ꢀame resistant
properties ineꢁective.
For video assembly instructions, please visit
Download from Www.Somanuals.com. All Manuals Search And Download.
Assemble Front frame as shown.
This will be done inThree steps:
1. Start with the base—just like building a normal house.
Front
#2
Frame
#3
#1
Assembly:
#2
Parts required
#1
for this step:
- All connectors
- All white frame tubes
2. Build the castle walls—add all the
vertical tubes with the connectors
on the top. Add tubes for the top
of the walls.
3. Build the roof—add the tubes and
connectors, as shown. The roof will
create a four-sided peak.
Make sure
connectors are
pushed into the
tubes as far as they
will go.
#9
#10
#3
#10
#6
#7
#8
#9
#8
#6
#5
#5
#4
#7
#4
#4
#4
#4
#4
#4
#4
#4
#4
#4
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Assemble Back frame as shown.
This will be done inThree steps:
1. Start with the base—just like building a normal house.
#2
Back
Frame
#1
#2
Assembly:
Parts required
#1
for this step:
- Remaining connectors
- All pink frame tubes
3. Build the roof—add the tubes and
connectors, as shown. The roof will
create a four-sided peak.
2. Build the castle walls—add all the
vertical tubes with the connectors on
the top. Add tubes for the top of
the walls.
Make sure
connectors are
pushed into the
tubes as far as
they will go.
#8
#9
#9
#6
#7
#8
#7
#5
#4
#5
#6
#4
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SWEET LILY Castle Back Cover
4. Separate the inside and outside walls
1. Assemble pink frame as shown on page 3.
2. Remove the SWEET LILY Castle back cover
from the bag marked “Back.”
by pulling apart the hook-and-loop
fasteners (don’t forget
Castle
Back
Cover:
3. Completely unzip the cover all the way
Parts required
for this step:
- Completed Frame (pink)
6.
Line up the frame on the red seam
as shown.
5. Lay the cover out so both the rectangular
- SWEET LILY
Castle Back
red seam and lavender wall face up.
BACK
4
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Lift the inside wall up and attach it to the frame
Make sure the bottoms of the
ilup with the bottoms of
with the hook-and-loop fasteners.
7x
asteners
8. Pull out any excess cover from the outside corners of the frame base to make a snug pocket.
Pull the cover over the closed end of the frame and across the top of the roof (you may need a helper).
The zipper strip should align with the frame.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Zip up the cover around the frame. Press the three hook-and-loop fasteners along inside the cover at
the top of the frame to keep the roof from sagging.
10. Align and fasten the hook-and-loop fastener around
both
The back of the castle is now
complete. Let’s do the front!
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SWEET LILY Castle Front Cover
1. Assemble white frame as shown on page 2.
2. Remove the SWEET LILY Castle front cover
from the bag marked “Front”.
Castle
Front
Cover:
3.
4. Unzip the front doors.
Parts required
for this step:
- Completed Frame (white)
. Lay the cover so the rectangular red seam
is exposed. The pink inside wall is over the
the printed floor. The doors should
- SWEET LILY
Castle Front
5. Separate the inside and outside walls
by pulling apart the hook-and-loop
fasteners.
FRONT
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
Line up the frame on the red seam, as show
7. Lift the inside wall up and attach it to the fram
with the hook-and-loop fasteners.
e sure the bottoms of th
ps line up with the bottom
he pads
1
fasteners
8
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Pull out any excess cover from the outside corners of the frame base to make a snug pocket.
Pull the cover with the doors over the closed end of the frame and across the roof
(you may need a helper). The zipper strip should align with the frame.
9. Zip up cover around the frame. Press the three hook-and-loop fasteners along inside the cover
at the top of the frame to keep the roof from sagging.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Fasten the two wide hook-and-loop fasteners around the vertical tubes on both sides of the door.
Zip up the
11. Unhook the fasteners in the roof turret. Raise the turret by bending the green plastic tube to
fit inside. The flat end fits in the middle of the center disk at the bottom and the cone-shaped
end faces up.
The front of the
castle is now
complete. Let’s build
the towers!
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Take two grey tubes and one
connector. Insert a tube into each
end of connector.
2. Open the hook-and-eye fasteners in the
tower. Insert one end of the tube into
the tower up to the the point. Fit the
bottom of the plastic tube into the
middle of the center disk in the
tower floor.
Tower
Assembly:
Parts requi
for this ste
- 2 Tower covers
- 4 Grey plastic tu
- 2 Grey plastic co
Storage:
3. Reclose the tower a
to the hook-and-loop
at the front corners
castle. The windows
face out. Repeat
Steps 1,2 and 3 for
the second tower.
entire
Collection
Product and colors may va
© 2008 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
Do©wn2lo0a0d8froWmoWrldwsw.ASpomaratnLutadls..cAollmr.igAhlltsMaRneusaelsrvSeeda.rchPANn#d0D00o0w0n0l0o0a0d0.
Questions? Call 1-800-PLAYSKL
|