Voyager® PRO UC
Wireless Headset System
WG201/B
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1 Package Contents and Features.................................4
1.1 USB Adapter............................................................ 4
1.2 Headset ................................................................... 4
2 Set Up .........................................................................6
2.1 Connecting USB Adapter to PC.............................. 6
2.2 Charging Headset.................................................... 6
2.3 Fitting Headset ........................................................ 6
5 Using Your Headset with Your Bluetooth
Mobile Phone............................................................11
Pairing Your Headset to Your Bluetooth
Mobile Phone............................................................... 11
Placing, Answering and Ending Calls
with Your Headset and Bluetooth Mobile Phone......... 11
6 PerSono® Suite Software ..........................................12
Softphone Support ...................................................... 12
Battery Life................................................................... 12
Settings Screen – Headset and USB Adapter............. 13
Help for USB Adapter Settings.................................... 13
PC Panel Screen.......................................................... 14
Advanced Settings....................................................... 14
Support Screen............................................................ 14
Updates ....................................................................... 14
7 Troubleshooting and Common Questions.................15
3 Using Your Headset System with
Microsoft Office Communicator ..................................8
Powering Headset On/Off.............................................. 8
Placing, Answering and Ending Calls with
Microsoft Office Communicator .................................... 8
4 System Information .......................................................... 9
Muting a Headset Call ................................................... 9
USB Adapter Indicator Light.......................................... 9
Headset Indicator Lights and Tones.............................. 9
Out of Range Warning ................................................. 10
Low Battery Warning ................................................... 10
Checking Battery Level................................................ 10
Turning Headset Indicator Blue Flash On/Off.............. 10
Mute Warning .............................................................. 10
Pairing Headset to USB Adapter................................. 10
Plantronics Voyager PRO UC User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Package Contents and Features
1.1 Voyager PRO UC USB Adapter and Charger
USB Adapter
CD includes:
• PerSono® Suite Software
• Complete User Guide
USB Charging Cable
AC Charger
1.2 Voyager PRO UC WH200/B Headset
Soft Gel Eartips (Small & Large)
and Foam Eartip Covers
Headset with Pre-Installed Medium
Eartip
Plantronics Voyager PRO UC User Guide
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Voyager PRO UC USB Adapter Features
Pairing Button
Indicator Light
Voyager PRO UC WH200/B Headset Features
Volume Up (+) and Down (-) Buttons
(also controls mute)
Status Indicator Light
Eartip
Power On/Off
Check Battery Button
Call Control Button
Micro USB Charging Jack
Dual Microphones with
Wind Screens
Plantronics Voyager PRO UC User Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Set Up
notE The USB charging cable can also be used to charge the
headset. To successfully charge your headset with the USB cable
the PC must be on and in active state (not standby). The charging
time will vary according to the number of other devices drawing
power from the PC’s USB port(s).
2.1 Connecting USB Adapter to PC
1 Insert the USB adapter into USB Port on PC. The indicator
light on the USB adapter will be solid red to indicate the USB
adapter is powered on.
2.3 Fitting Headset
The headset comes configured for the right ear. Ensure a proper
fit for optimal sound clarity and comfort.
1 Guide the earloop behind your ear and place the
headset so that the speaker and eartip rest comfortably
in your ear.
ImPoRtAnt notE For best performance it is recommended
that Windows is updated with Service Pack levels listed below:
1
®
Microsoft Windows XP-Service Pack 3 (SP3) or later
®
Microsoft Windows Vista -Service Pack 1 (SP1) or later
2
2.2 Charging Headset
2 For optimal voice clarity, pivot the boom up or down to
1 Connect the AC charger to outlet and headset.
The indicator light on the headset will be solid red to indicate
that the headset battery is charging.
point the microphones toward the corner of your mouth.
The headset can be worn on either ear by adjusting the
microphone boom. To convert for wearing on the left ear:
2 Charge for at least 30 minutes prior to the first use.
A full charge takes 1.5 hours.
3 Pivot the boom into an upright position.
4 Rotate the boom and speaker to the other side of the
headset.
3
CHARgIng TIME
30 min .....................
Minimum charge
before first use
Indicator
Light
1.5 hours ................
Full charge
4
notE Always charge at near room temperatures; never charge
battery at temperatures below 0ºC (32ºF) or above 40ºC (104ºF).
Plantronics Voyager PRO UC User Guide
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Eartips
The headset comes with the medium eartip installed. You can
replace it with the optional small or large eartip provided.
1 to remove the eartip, grip the eartip with your thumb and
forefinger. Gently push it into the speaker housing and
rotate it a quarter turn to the left. Gently lift the eartip
away from the headpiece.
1
2 to attach a new eartip, align the tabs on the eartip with
the slots on the speaker housing. Gently push the eartip
into housing while turning it a quarter turn to the right.
the eartip will stop rotating when it is attached.
2
NOTE The optional foam eartip cover can be used for a more
comfortable and stable fit.
Plantronics Voyager PRO UC User Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Using Your Headset System with
microsoft office Communicator
Powering Headset on/off
The headset will be ready to use once it has been charged as
described in Section 2.2 Charging Headset.
To power the headset on press and hold the Power On/Off button
for two seconds. The headset indicator light will remain solid blue
for two seconds to confirm that the headset is powered on.
notE The USB adapter indicator light will remain solid blue
when the headset is powered on and paired to the headset. The
indicator light will remain solid red when the headset is powered
Indicator Light
Power On/Off Button
on but not paired to the headset.
To conserve power you may optionally power the headset off
by pressing the Power On/Off for two seconds. The headset
indicator light will remain solid red for two seconds to confirm that
the headset is powered off.
notE Once powered off you will not be able to use the headset.
Placing, Answering, and Ending Calls with microsoft office Communicator
To place a call
Short press call control button on headset. Dial number using Microsoft Office Communicator.*
Short press call control button on headset.
To answer a call on the headset
To answer a call when already on an Short press the call control button once to end the mobile phone call then press again to answer
active call on your mobile phone
your Microsoft Office Communicator call.
To end a call on the headset
Short press call control button on headset.
*Consult Microsoft Office Communicator Help for more information on how to place a call.
notE You can also answer calls directly from Microsoft Office Communicator by clicking on the Call Alert that appears on your PC screen.
In this case the call will be directed to the default speakerphone which may not be your headset. Consult Microsoft Office Communicator
Help for more information.
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at
moderate levels. For more information on headsets and hearing visit: www.plantronics.com/healthandsafety.
Plantronics Voyager PRO UC User Guide
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4 System Information
muting Headset During a Call
Volume Up (+) and Down (-) Buttons
To mute a call, press and hold the volume + and - buttons
simultaneously until you hear a status prompt. The sequence
will start with low-high tones plus a voice prompt “Mute On” (in
English). The low-high tones repeat after 15 minutes to advise
mute is activated. The full sequence repeats every 30 minutes
until mute is de-activated.
To unmute a call, press and hold the volume + and - buttons
simultaneously until you hear high-low tones followed by a voice
prompt “Mute Off” (in English).
USB Adapter Indicator Light
USB Adapter Status
Indicator Light
Flashes blue
Flashes red and blue
Solid blue
Headset in talk mode
USB adapter and headset pairing
Connected, no activity
Powered on - headset not paired
Solid red
Headset Controls and Indicators
Action
Indicator Light
tone
Power On/Off
Press Power/Off button 2
seconds
On: solid blue for 2 seconds
Off: solid red for 2 seconds
On: ascending tone
Off: descending tone
Check if headset is powered on Short press call control button
or volume + or - button
Short blue flash
None
Incoming call
None
Flashes blue
Three single low tones
Call answer/end
Short press call control button
Short blue flash
Single low tone followed by low-
low-high tones
Adjust the volume (during a call) Short press volume + or -
Single blue flash
Tone at each change in volume.
Double tone when min/max
volume level reached
button
Call indicator light
(enable/disable)
With headset powered on, press Turn indicator on: blue glow
Single low tone
power, volume + and - buttons
increases for 2 seconds
Turn indicator off: blue glow
fades for 2 seconds
simultaneously for 1 second
Reconnect after leaving range for Short press call control button
more than 30 seconds
Single blue flash
Single low tone
Plantronics Voyager PRO UC User Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Battery Status
Pairing Headset to USB Adapter
To check the battery status, the headset must be powered on.
Short press the power button. The indicator light flashes red to
show the battery charge level as shown below.
The headset and USB adapter are supplied paired to each other.
However, if you wish to use a replacement headset with your
existing USB adapter, the units can be paired to each other by the
following method:
Charge Indicator Lights
1 Ensure your replacement headset is fully charged.
Red Flashes
Battery Level
More than 2/3 full
2 Press and hold the power button until the indicator light
flashes red and blue. The headset is now in pairing mode.
S
notE If you don’t see the red and blue flash, press and hold the
power button to turn your headset off. Then press and hold the
power button again until you see the red and blue flash.
S S
1/3 to 2/3 full
3 Place the USB adapter in pairing mode by pressing
and holding the pairing button on the adapter for two
seconds. The pairing light will flash red and blue.
S S S
Less than 1/3 full
4 When the pairing light on the USB adapter goes solid
blue, the headset and the USB adapter are paired.
Automatic Battery Status Alerts
notE Take caution pairing the USB adapter. Do not press hard.
Please “press” with both fingers rather than push on the USB
adapter to avoid damage to the USB adapter or USB port.
When the battery charge is very low, a tone and voice prompt in
English will automatically occur. See below.
Low Battery Warnings
Battery Level
Tone
Voice Prompt
30 minutes of talk
time remaining
(this alert only occurs
during an active call)
Double high tone “Battery Low”
every 15 minutes repeats every
30 minutes
10 minutes of talk
time remaining
Triple high tone
every 30 seconds repeats every 3
minutes
“Recharge Battery”
out of Range Warning
If you are on a call you will hear the audio degrade as you move
out of range.
If you stay out of range, active calls will be suspended. Calls will
be re-established upon walking back into range.
Plantronics Voyager PRO UC User Guide
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Using Your Headset with your
®
Bluetooth mobile Phone
3 Use the commands on your phone to locate the headset.
Pairing your Headset to your Bluetooth
mobile Phone
For most phones select Settings>tools>Connections>
Bluetooth>Search>PRoPlantronics. See your phones user
guide for more information.
1 turn on your mobile phone and enable Bluetooth. For
most phones select Settings>tools>Connections>
Bluetooth>on. See your phones user guide for more
information.
4 When prompted for a passkey, enter 0000 (4 zeros). The
headset indicator light will flash blue when paired successfully.
notE To pair your headset with an additional phone, turn on the
phone then repeat steps 2 through 4.
2 Press and hold the power button on the headset until
the indicator light flashes red and blue. The headset is
now in pairing mode.
notE For detailed pairing instructions for popular mobile phones
notE If you don’t see the red and blue flash, press and hold the
power button to turn your headset off. Then press and hold the
power button again until you see the red and blue flash.
The headset will stay in pairing mode for three minutes.
Placing, Answering, and Ending Calls with your Headset and Bluetooth mobile Phone
To place a call
Dial number on your mobile phone keypad.
Short press call control button.
To answer a call
To answer a call when already on an active
Microsoft Office Communicator call
Short press the call control button to end the Microsoft Office Communicator call, then
press again to answer your mobile phone call.
To end a call
Short press call control button.
Redial last number*
Double press call control button. There will be a double low tone on each press. A final tone
indicates the last number has been redialed.
Activate voice dialing*
Press and hold call control button for two seconds. First tone on key press start followed by
a second tone which indicates voice dial is activated.
Reject a call
Missed call
Press call control button for one second until you a single low tone.
Tap any button to clear the indicator light. The indicator light will triple flash purple every 10
seconds for 5 minutes or until cleared.
Transfer a call from your mobile phone to
your headset
While on a call, press the call control button for one second until you hear a single tone
followed by double low tones.
Transfer a call from your headset to your
mobile phone
While on a call, press the call control button for one second until you hear a single tone
followed by double low tones.
* Only available on mobile phones and carriers that support these features.
Plantronics Voyager PRO UC User Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6 PerSono Suite Software
It is highly recommended that you install the PerSono Suite
software. Though your Voyager PRO UC system will operate
without the software running it will limit the system’s capabilities.
3 the “manage API Access Control” screen will pop
up stating that “Another program is trying to access
Skype”. the name of the program will appear as
“PerSonoSuite.exe” with the publisher “Plantronics,
Inc.” You must select “Allow this program to use Skype”
and click oK.
PerSono Suite software allows you to do the following with your
Voyager PRO UC system:
• Answer/end calls from the PC remotely with the headset
(requires use of supported softphone)
• Customize your headset and USB adapter settings to your
personal preferences
• Automatically manage your PC multimedia so you never miss a call
• Quickly access links to product support and software/firmware
upgrade information
Softphone Support
For a list softphones supported by PerSono Suite refer to www.
plantronics.com/SoftphoneCompatibility PerSono Suite
software supports all the softphones on the list with no additional
steps by the user except Skype™.
4 to confirm that PerSono Suite is now supporting Skype,
go to the “PC Panel” tab in PerSono Suite and ensure
that Skype is listed under “Softphones”.
To allow Skype to be a supported softphone in PerSono Suite
please follow these steps:
1 Ensure PerSono Suite software is running on your PC.
You will see a headset icon in the lower right portion of
the PC tray bar when PerSono Suite software is running.
2 If Skype is running on your PC, Skype will notify you of
the event that “PerSonoSuite.exe wants to use Skype”.
Go to the “new event” tab located in the upper right of
the Skype window and click on the red flag. You then
will need to click on the “PerSonoSuite.exe” link to be
taken to the “manage API Access Control” screen.
Battery Life
At the lower left corner of the screen (and for all software
screens), you will see one of the following icons indicating the
approximate charge left in the headset battery.
100%
75%
50%
25%
Less than 5 mins
Plantronics Voyager PRO UC User Guide
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Screen – Headset and USB Adapter
The Settings Screen allows you to customize the adapter and headset to your preference. The Voyager PRO UC System is shipped with the
default settings and can be changed as described in the Settings column below.
notE Some parameters may appear as grayed out. PerSono Suite automatically grays out parameters that do not apply to a particular
Plantronics device.
Settings – Headset
Feature
Settings
Default
Mute tone
On/off
On
Ring tone – PC
Sound 1/sound 2/sound 3
On/off
Sound 2
Ring tone volume – PC
Ring Tone - Mobile
Ring Tone Volume - Mobile
Second Inbound Call
On
Sound 1/sound 2/sound 3
On/off
Sound 1
On
Ring continuously/ring once/ignore
Ring continuously
Settings – USB Adapter
Feature
Settings
Default
Wideband
On
Audio bandwidth – PC
Ring both headset/PC
Wideband/narrowband
On/Off
Help for USB Adapter Settings
Audio
Bandwidth
The system will support both narrowband and wideband audio from the PC.
Wideband
PC
Wideband audio delivers heightened speech clarity and life-like fidelity. However, wideband audio
consumes more battery power and has more stringent access criteria which reduces the number of
systems that can be deployed in a small area.
All PCs support wideband audio.
When switching between narrowband and wideband audio, you must re-establish the audio link for the
changes to take effect.
Plantronics Voyager PRO UC User Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Panel Screen
Support Screen
• Choose whether you want PerSono Suite software to launch
when you login to Windows.
The support screen provides on-line access to this printable user
guide, frequently asked questions, how to contact Plantronics,
and software upgrade information. The current version of software
and firmware currently running on your system is also shown here.
• See a list of supported softphones running on your PC.
• See which Plantronics device is attached to your PC and
working with PerSono Suite software.
• Customize how you want the PerSono Suite software to
manage your multimedia when a call begins/ends.
Updates
All the required software and firmware for your Plantronics device
can be remotely updated if and when updates are available. You
can control how frequently the system will check for available
updates. When updates are available, you can view all pending
updates and decide when to download and install any one of
them.
Advanced Settings
microsoft office Communicator Dial-tone Enabled
If this feature is set to ON, when a PC radio link is established,
Microsoft Office Communicator will assume the user is trying to
place a VOIP call and provide a dial tone.
The particular version of PerSono Suite software and headset/
base firmware running on your system is always reflected in the
VERSIONS fields.
If this feature is set to OFF, when a PC radio link is established,
Microsoft Office Communicator will sit idle.
notify me when updates are available: By enabling this check
box, you will activate a periodic automatic check for available
software and firmware updates.
“Microsoft Office Communicator Dial-tone Enabled” can be set to
ON or OFF.
Microsoft Office Communicator Certified product:
Default Setting = ON
When this parameter is enabled, automatic check for updates will
be activated and the frequency field will be highlighted allowing
you to choose the frequency of checking for updates, e.g., once
every 3 months, once every month or once every week.
Standard product: Default Setting = OFF
Audio Sensing Enabled
Audio Sensing is a special feature supported by Plantronics
wireless devices that can detect audio signal at the USB port
and automatically establish a PC radio link between the base and
wireless headset without the user having to press the PC call
control button. If the parameter “Microsoft Office Communicator
Dial-tone Enabled” is set to ON, every time the user presses the
PC call control button the Microsoft Office Communicator dial
tone will be heard. However, the user may have pressed the PC
call control button to listen to music, etc., and does not want to
hear the dial-tone. In this case, if the user sets the “Audio Sensing
Enabled” parameter to “ON”, the radio link will be established
automatically when any PC audio is detected at the USB port,
thus eliminating the need for the user to press the PC call control
button.
When this parameter is disabled, automatic check for software/
firmware updates is disabled.
Check For Updates: You can choose to check for available
software/firmware updates at any time by clicking on the Check
For Updates button.
Available Updates: Following an automatic or manual check for
updates, this field will be populated with any applicable software
and firmware updates.
“Audio Sensing Enabled” can be set to ON or OFF.
Microsoft Office Communicator Certified product: Default Setting
= ON
Standard product: Default Setting = OFF
Plantronics Voyager PRO UC User Guide
14
Download from Www.Somanuals.com. All Manuals Search And Download.
7 troubleshooting and Common Questions
troubleshooting — microsoft office Communicator Usage
My headset doesn’t work with
Microsoft Office Communicator.
Make sure your headset is charged.
Make sure your headset is on and connected.
Press the call control button on your headset.
Fine tune the listening volume with the call control button.
If the volume is still too low, adjust the listening volume on the PC using Microsoft Office
Communicator*.
The sound is distorted or I hear Reduce speaking volume on the PC using Microsoft Office Communicator*.
an echo in the headset.
Point microphone towards your chin.
If the distortion is still present, lower the volume using the call control button.
While on an Microsoft Office
Communicator call I want to
accept a call from my mobile
phone.
Short press the call control button for less than 1 second (this will disconnect the Microsoft Office
Communicator call.) Press the call control button again to connect with your mobile phone.
Reconnecting the Bluetooth link If you turn on the headset beyond Bluetooth range, and then return within it, you may need to
between your headset and USB reestablish the Bluetooth link by pressing the USB adapter button.
adapter.
Talk time performance is
significantly degraded even
after a full recharge.
* Consult Microsoft Office Communicator Help for more information
Plantronics Voyager PRO UC User Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting — mobile Phone Usage
My headset does not
work with my phone.
Make sure the headset is fully charged.
Make sure headset is paired with the Bluetooth phone you are trying to use.
See “Pairing Your Headset to your Bluetooth Mobile Phone” on page 11.
My phone did not locate the
headset.
Turn both your phone and headset off and on, and then repeat the pairing process on page 11.
I could not enter my PIN code.
I cannot hear caller/dial tone.
Turn both your phone and headset off and on, and then repeat the pairing process on page 11.
Your PIN code, or Passkey, is 0000 (4 zeros).
The headset is not turned on. Press the call control button for approximately 2 seconds until you
hear a tone or see the indicator glow blue.
Your headset is out of range. Move the headset closer to the Bluetooth phone.
Your headset battery is drained. Charge your battery. See “Charging Headset” on page 6.
The listening volume is too low. Incremental tapping of the call control button will adjust volume.
Make sure that the headset fits properly. See “Fitting Headset” on page 6.
Audio quality is poor.
Your headset is out of range. Move the headset closer to the Bluetooth phone.
Callers cannot hear me.
My headset falls off my ear.
Make sure that headset is sitting correctly in ear with boom pointing towards corner of mouth.
See “Fitting Headset” on page 6.
Make sure that headset is sitting correctly on your ear with boom pointing towards corner of
mouth.
See “Fitting Headset” on page 6.
Plantronics Voyager PRO UC User Guide
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
© 2009 Plantronics, Inc. All rights reserved. Plantronics, the logo design, PerSono, Plantronics Voyager, and Sound Innovation are
trademarks or registered trademarks of Plantronics, Inc. Microsoft, Windows and Vista are trademarks or registered trademarks
of Microsoft Corporation. Skype is a trademark of Skype Limited or other related Skype companies. The Bluetooth word mark is
owned by Bluetooth SIG, Inc. and any use of the mark by Plantronics is under license.
Patents US 5,210,791; Patents Pending.
81979-01 (10.09)
Download from Www.Somanuals.com. All Manuals Search And Download.
|