USB 2.0 to 10/100Mbps Ethernet Adapter
UE-9521
User Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However,
special attention must be paid to the dangers of electric shock and static electricity when working with
electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed
at all times to ensure the safe use of the equipment.
Revision
User’s Manual for PLANET USB2.0 to Fast Ethernet Adapter
Model: UE-9521
Rev: 1.0 (December, 2004)
Part No. EM-UE9521
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
CHAPTER 1
INTRODUCTION..............................................1
1.1 FEATURES ..................................................................................................................................... 1
1.2 SPECIFICATION............................................................................................................................... 2
1.3 PACKAGE CONTENTS ...................................................................................................................... 2
1.4 MINIMUM SYSTEM REQUIREMENTS................................................................................................... 2
CHAPTER 2
INSTALLATION PROCEDURE ........................3
2.1 WINDOWS 98/ME/2000 DRIVER INSTALLATION.................................................................................. 3
2.2 WINDOWS XP DRIVER INSTALLATION ................................................................................................ 7
APPENDIX A
FAQ..................................................................9
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introduction
Thanks you for purchasing our UE-9521. This guide is to provide the installation and usage of this
adapter for network installers and users.
The USB2.0 Fast Ethernet Adapter provides a convenient and cost-effective way of connect the
notebook or desktop PCs to an IEEE 802.3/802.3u standard Fast Ethernet network through the Universal
Serial Bus (USB) interface. This is designed for both Notebook and Desktop PC with USB2.0 or USB1.1
connector and operating system supported. With the new interface USB2.0, it can increase bandwidth up
to 480Mbps for the device it connected. It makes the USB network adapter truly work in 100Mbps
network, not only 12Mbps of the USB1.1 limitation. Full/Half duplex operation mode is auto-detected.
With transmission and reception taking place simultaneously, data transfer is double. Using UE-9521,
you can simplify your Network connections at home, office and even on the road.
This adapter can work with Windows 98/Me/2000/XP. Whatever your requirements are ease of
installation, superior performance or responsive support backed up by unlimited technical support, this
adapter is the superior choice.
1.1 Features
l
l
l
l
USB specification 2.0 and 1.1 compliant
Bandwidth up to 480Mbps
Complies with IEEE 802.3 10Base-T and 802.3u 100Base-TX standards
Provides Full-Duplex Ethernet operation for both 10Base-T and 100Base-TX expand the bandwidth
up to 20/200Mbp
l
l
l
l
l
With one Type A upstream port to connect USB hub or PC with USB port
Bus powered external power free
Compact and robust design - perfect solution for all network users, both desktop and mobile
Hot-Swap
Plug and Play
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Specification
Model
UE-9521
Network Standard
USB Standard
Data Transfer Rate
IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX
USB2.0 compliant
LAN: 10/20Mbps, 100/200Mbps
USB2.0: 12/480Mbps
One RJ-45
Connectors
One USB Type A
LED indicators
Driver support
3: LNK/ACT, FDX, 100M
Windows 98/Me/2000/XP
Operation Environment Temperature: 0~40 degree C (operating)
Humidity: 10~95%, non-condensing
Power mode
Bus Powered
Power consumption
Dimension (mm)
Weight
5V DC, 150mA max
260 x 35 x 16 (W x D x H)
32g
Network Media
10Base-T: RJ-45 STP/UTP, Category 3~5 cable, 100meters maximum
100Base-TX: RJ-45 STP/UTP, Category 5 cable, 100meters maximum
FCC, CE
Certification
1.3 Package Contents
Before installation, please check the items of your package. The package should include the following
items:
UE-9521
x 1
x 1
Drivers and User’s Manual CD
If any of the above items are missing, contact your supplier as soon as possible.
1.4 Minimum System Requirements
Before installation, please check the following requirements with your equipment.
•
•
•
Operating System: Windows 98/Me/2000/XP
PC with CD-ROM drive
USB port with standard 2.0 or 1.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installation Procedure
Before you proceed with the installation, it is necessary that you have enough information about the
USB2.0 to Fast Ethernet Adapter. Use the Procedure described in below in this chapter to install under
Windows 98/Me/2000/XP.
2.1 Windows 98/Me/2000 Driver Installation
Note: The following installation operates under Window 2000. Procedures will be similar to
Window 98/Me. About Windows XP driver installation, please refer to next section.
1. Plug UE-9521 into your PC’s USB port.
2. Power on the PC and insert Driver and User’s manual CD into CD-ROM drive.
3. Windows will automatically detectUE-9521 and ask you to install driver. Please click “Next”.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Please select the first option and click “Next” to continue.
5. Select “Specify a location” and click “Next”.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
6. You can click “Browse” to find the driver location. (Assume "E" is your CD-ROM drive, the
driver can be found in E:\Driver\Win2000). Please click “OK” to continue.
7. Windows will show this screen to prompt you that it found a driver for the device you are
installing, please click “Next” to continue.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Windows 2000 may tell you this driver doesn’t contain Microsoft digital signature. Please don’t
worry about this, click “Yes” to continue the installation.
9. Please click “Finish” to complete the driver installation.
(For Win98/Me, Windows will ask you to restart your PC when driver installation finished.)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Windows XP driver installation
1. Plug UE-9521 into your PC’s USB port.
2. Power on the PC and insert Drivers and User’s manual CD into CD-ROM drive.
3. Windows XP will detect UE-9521 and ask you to install driver. Please select the second option
and click “Next”.
4. Please select “Include this location in the search” and then click “Browse” to find out UE-9521
driver location to install driver. (Assume "E" is your CD-ROM drive, you can find out UE-9521
driver in E:\Driver\WinXP). Please click “Next” to continue.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. WinXP will show you this dialog box to prompt you the driver has not passed Windows logo
testing, please press “Continue Anyway” to continue.
6. Please click “Finish” to complete the driver installation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A FAQ
Q: What is USB?
A: USB (Universal Serial Bus) is a “Plug and Play” interface between a computer and add-on
devices (such as audio players, joysticks, keyboards, telephones, scanners and printers).
With USB, a new device can be added to your computer without having to add an adapter
card or even having to turn the computer off.
Q: What is the maximum speed of USB 2.0?
A: USB version 1.1 supports a data rate of 12 Mbps. The New USB 2.0 Supports a
data rate up to 480 Mbps.
Q: How long of a cable can I use to connect UE-9521?
A: The USB specification limits the length of a cable between two devices to 5
meters. About the RJ-45 cable, the max length is 100m.
Q: Why I cannot install UE-9521 into WinNT?
A: WinNT is not support USB device, so you cannot install UE-9521 into WinNT
system.
Q: When UE-9521 connects to my PC, Windows will show me a message such as “a
high speed USB device plug into a low speed USB device”, what is it mean?
A: When Windows show this message, it is mean you connect UE-9521 into a USB 1.1 port.
UE-9521 is a USB 2.0 device, when you connect USB2.0 device into a USB 1.1 port,
Windows will show you the message to prompt you the USB 2.0 device will work as a USB
1.1 device.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|