64-bit PCI Gigabit Ethernet
Network Adapter
ENW-9607/9607M
User’s Manual
Version 1.0
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
CHAPTER 1
INTRODUCTION ............................................................................................. 1
1.1 PACKAGE CONTENT .......................................................................................................................... 1
1.2 FEATURES........................................................................................................................................ 1
1.3 VERIFYING YOUR SYSTEM REQUIREMENTS .......................................................................................... 2
1.4 GATHERING TOOLS AND DOCUMENTATIONS ......................................................................................... 2
CHAPTER 2
HARDWARE INSTALLATION......................................................................... 3
2.1 LED DEFINITIONS ............................................................................................................................. 3
2.2 HARDWARE INSTALLATION.................................................................................................................. 4
CHAPTER 3
DRIVER INSTALLATION ................................................................................ 6
3.1 INSTALLING DRIVER TO WINDOWS 98 / ME / 2000 ............................................................................... 6
3.2 INSTALLING DRIVER TO WINDOWS XP / SERVER 2003 ......................................................................... 8
3.3 INSTALLING DRIVER TO WINDOWS NT............................................................................................... 10
3.4 INSTALLING DRIVER TO LINUX .......................................................................................................... 10
3.5 INSTALLING DRIVER TO NOVELL 4.X .................................................................................................. 11
3.6 INSTALLING DRIVER TO NOVELL 5.X / 6.X .......................................................................................... 11
CHAPTER 4 UTILITY.............................................................................................................. 12
4.1 INSTALLATION INSTRUCTIONS............................................................................................................ 12
4.2 UTILITY OPERATING ........................................................................................................................ 13
CHAPTER 5
APPENDIX A
SPECIFICATIONS......................................................................................... 15
ADVANCED PROPERTIES ...................................................................... 16
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introduction
The ENW-9607 is a 64-bit 10/100/1000Base-T PCI 2.2 Gigabit Ethernet adapter designed to address
high-performance system application requirements. The ENW-9607M provides a SFP, mini-GBIC
interface. It can be attached with 1000Base-SX or 1000Base-LX mini-GBIC modules, depending on the
practical applications.
Using PCI 2.2 compliant PCI specification and 32/64-bit interface, the ENW-9607/9607M supports both
current 32-bit motherboards and also the interface and operating systems of the next generation,
future-proofing your investment. Lower TCO (Total Cost of Ownership) yet with high performance, the
ENW-9607/9607M is now the choice of your network data server or just right for your powerful desktop
PCs.
1.1 Package Content
Check that your package contains the following items:
ü
ü
ü
1 x ENW-9607/9607M
1 x Quick Installation Guide
1 x CD-ROM
Please contact the seller if any of the items is missing or damaged.
?
Be sure to retain your proof of purchase, as it is required to receive warranty service.
Note:
1.2 Features
Ø
Ø
Ø
Ø
Ø
Compliant with PCI 2.2 specifications
Supports full wire-speed Gigabit Ethernet rate
ENW-9607 supports 10/100/1000Mbps auto-negotiation for optimal connection
ENW-9607M supports 1000Base-SX/LX mini-GBIC modules
Internal FIFOs and external memory buffers maximize throughput by minimizing retransmissions
when connected to multiple clients under heavy load
Jumbo frame support
Ø
Ø
Ø
Ø
Ø
IEEE 802.1p priority queuing support
IEEE 802.3x Frame-based flow control and duplex operation
ENW-9607 supports WOL (Wake on LAN)
ENW-9607 supports Marvell Virtual Cable Tester (VCT) for advanced cable diagnostic function
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 Verifying Your System Requirements
Before installing the ENW-9607/9607M, be sure your computer meets the following requirements:
Hardware
ü
ü
ü
CPU: 300MHz or Faster
RAM: 64MB (Minimum)
PCI Local Bus 2.1 or 2.2 compliant
Software
ü
ü
ü
Microsoft Windows 98/Me/NT/2000/XP/Server 2003
Linux
Novell 4.x / 5.x / 6.x
1.4 Gathering Tools And Documentations
To install the adapter, you need the following items:
ü
ü
ü
A suitable screw driver
Your operating system documentation
Your system unit documentation, including any service documentation
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Hardware Installation
2.1 LED definitions
The faceplate of ENW-9607 has four LEDs: 100, 1000 FDX and ACT. And ENW-9607M has three LEDs:
1000, FDX and ACT. The pictures below have showed the faceplate of ENW-9607 and ENW-9607M.
Table 2-1 and 2-2 explain the function and state of the LEDs.
Faceplate of ENW-9607 and 9607M
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LED
Description
Off/Off: Works with 10Mbps
100 / 1000
On/Off: Works with 100Mbps
Off/On: Works with 1000Mbps
Off: Works in Half-Duplex mode
On: Works in Full-Duplex mode
Blink: Transmitting or receiving data through the LAN
Table 2-1 Descriptions of ENW-9607 LEDs
FDX
ACT
LED
Description
Off: The connection is not established.
On: The connection is not established.
1000
FDX
ACT
On: Works in Full-Duplex mode
Blink: Transmitting or receiving data through the LAN
Table 2-2 Descriptions of ENW-9607M LEDs
2.2 Hardware Installation
Step 1: Turn off the PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty, non-shared bus mastering PCI slot and remove the corresponding back
plate. Save the screw for use in Step 6.
Step 5: Carefully insert the adapter into the chosen slot and press firmly with proper push to
ensure it is fully seated in the slot.
Step 6: Secure the adapter with the screw you saved in step 4.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7: Replace the PC cover.
Step 8: Power on the PC and refer to next chapter to install the driver of this adapter.
Please do not install the ENW-9607/9607M in a shared PCI slot. Avoid any PCI slot next
to an ISA slot because this is often a shared slot and does not support bus mastering.
?
You may refer to the mainboard manual to know which PCI slot share the resource with
AGP slot and avoid using it as well.
Note:
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Driver Installation
A device driver must be installed before your ENW-9607/9607M can be used with your computer. This
chapter describes how to install the driver for various operating systems. Before you begin the driver
installation process, make sure you have the installation disks for your computer’s operation system
nearby. The driver installation below is for ENW-9607M, which is similar for ENW-9607. They have to
install with different driver, please make sure your have select correct file during the installation.
3.1 Installing Driver To Windows 98 / Me / 2000
Make sure the ENW-9607M has been successfully inserted in your computer before you start to install
the driver. If this is the first time you install the ENW-9607M into your computer, Windows will
automatically detect it and updates the hardware information database. To install the driver provided,
please follow the steps below:
The following installation operates under Windows 2000. Procedures will be
?
similar to Window 98/Me.
Note:
1. Install ENW-9607M into your PC’s PCI slot.
2. Power on the PC and insert Driver Disk into CD-ROM drive.
3. Windows will automatically detect ENW-9607M and ask the user to install driver. Please click
“Next”.
4. Please select the first option and click “Next” to continue.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select “Specify a location” and click “Next”.
6. You can click “Browse” to specify the driver location. (Assume "E" is your CD-ROM drive, the
driver can be found in E:\Drivers\ENW-9607M\Win2000). Please click “OK” to continue.
7. Windows will show this screen to prompt you that it finds a driver for the device you are
installing, please click “Next” to continue.
8. Windows may prompt you this driver is not digitally signed by Microsoft. If the device name is
correct, please press ”Yes” to continue.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Please click “Finish” to complete the driver installation.
(In Win98/Me, Windows will ask you restart your PC when driver installation finished.)
3.2 Installing Driver To Windows XP / Server 2003
The following installation operates under Window XP. Procedures will be similar
?
to Window Server 2003.
Note:
1. Install ENW-9607M into your PC’s PCI slot.
2. Power on the PC and insert Driver Disk into CD-ROM drive.
3. Windows XP will detect ENW-9607M and ask you to install driver. Please select the second
option and click “Next”.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Please select “Include this location in the search” and then click “Browse” to specify
ENW-9607M driver location to install. (Assume "E" is your CD-ROM drive, you can find
ENW-9607M driver in E:\Drivers\ENW-9607M\WinXP). Please click “Next” to continue.
5. WinXP will show you this dialog box to prompt you the driver is not digitally signed by
Microsoft, please press “Continue Anyway” to continue.
6. Please click “Finish” to complete the driver installation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Installing Driver To Windows NT
1. Install ENW-9607M into your PC’s PCI slot.
2. Power on the PC and insert Driver Disk into CD-ROM drive.
3. Click START -> SETTINGS -> CONTROL PANEL -> NETWORK.
4. Select ADAPTERS.
5. Click “ADD” button.
6. Select “HAVE DISK”.
7. Assume "E" is the CD-ROM drive. Enter the path as “E:\Drivers\ENW-9607M\WinNT.
8. Click OK.
9. Select the “PLANET ENW-9607M 1000Base-SX/LX SFP Gigabit Ethernet Adapter (Marvell
Chip)” entry that matches your adapter.
10. Click OK.
11. Select the appropriate configuration.
12. Click OK.
13. Restart your system.
We strongly recommend you to install the latest Windows NT4 Service Pack
?
AFTER successful installation of the driver
Note:
3.4 Installing Driver To Linux
1. Login as 'root'.
2. Unpack the driver installation package using the command
# tar xfvj install-???.tar.bz2
or
# bunzip2 -c install-???.tar.bz2 | tar xfv -
3. To start the driver build process, go to the directory DriverInstall
10
Download from Www.Somanuals.com. All Manuals Search And Download.
and start the build process with the following command:
# cd DriverInstall
# ./install.sh
4. Choose your favorite installation method.
5. The driver will be compiled and installed.
6. Please restart Linux system.
3.5 Installing Driver To Novell 4.x
1. Update NBI.NLM, NEB.NLM, MSM.NLM, and ETHERTSM.NLM in the SYSTEM directory of
the server to the latest versions available for NetWare 4.20 (working versions are provided
with this driver).
2. Usually you should install the latest support pack from Novell. If it is not possible to upgrade
these NLMs before driver installation (e.g. if no workstation is connected or you are installing a
NetWare 4.20 server), you may also 'outcomment' the 'OF:' line in YUKONNW.LDI ('OF'
means 'Other Files' that need to be copied during installation).
3. Please provide INSTALL with the full path to the LAN driver (after pressing <INSERT>). If you
do not want to replace some of these files, press <ESC> when you are asked if the existing
file should be saved. You should also copy NBI.NLM to the directory where SERVER.EXE
resides (normally C:\NWSERVER).
4. Install the driver YUKONNW.LAN for NetWare v4.20 via INSTALL.NLM. The installation
support file YUKONNW.LDI is used to install the driver. If you are not certain how to use this
NLM, please refer to its (printed) documentation or use the online help.
3.6 Installing Driver To Novell 5.x / 6.x
1. If the adapter is installed into the machine, NetWare will detect the new adapter and try to
install a driver. Press <ENTER> to get a list of all available drivers and then press <INSERT>
to install an unlisted driver. Enter the path to the driver and select YUKONNW.LAN. Choose
“Yes” to copy the driver to the server. NetWare will now install the driver.
2. Once the driver has been installed, the adapter parameters or bindings can be changed in the
AUTOEXEC.NCF file using the NWCONFIG tool.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Utility
ENW-9607 is VCT Technology supported. The Virtual Cable Tester(TM) installation package contains
the Marvell Virtual Cable Tester(TM) application. This utility can help user to diagnose the cable status
and verify the cable length.
The Marvell Virtual Cable Tester(TM) can only be used on Windows 2000 and
?
Windows XP.
Note:
4.1 Installation Instructions
1. Run “setupVCT.exe” under “E:\Utility\VCT” directory. Or click the “Start” button and choose “Run”,
enter “E:\Utility\VCT\setupVCT.exe” to the dialog box (Assume “E” is your CD-ROM drive). You will
see the dialog box as below. Please click “Next” to continue.
2. Please select the first option “I accept the terms in the license agreement” and click “Next” to
continue.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Please check the installation note and click “Next” to continue.
4. Please click “Install” to begin the installation.
5. Please click “Finish” to complete the utility installation.
4.2 Utility Operating
After installation, you can find the utility in “Start” => “Programs” => “Marvell” => “Virtual Cable
Tester”. Please click “Virtual Cable Tester” option to start. If you see the dialog box as below,
please make sure you are using ENW-9607 and the card had been install to your PC properly.
When the utility starts, you will see the screen as below. If you install two or more ENW-9607 to
13
Download from Www.Somanuals.com. All Manuals Search And Download.
your PC, please select the card you want to test in the first field. Then click “Run” button to test the
cable status of selected ENW-9607.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Specifications
Model
ENW-9607
IEEE 802.3
ENW-9607M
Standards
IEEE 802.3u
IEEE802.3ab
IEEE802.3ab
Connectors
LEDs
RJ-45
Mini-GBIC
100 / 1000 / FDX / ACT
4-pair, Category 5
Category 5 enhanced
Half duplex mode: 10/100/1000 Mbps
Full duplex mode: 20/200/2000 Mbps
PCI 2.1/ 2.2
1000 / FDX / ACT
Depends on the mini-GBIC
module installed
Cabling Requirements
Speed
Full duplex mode: 2000 Mbps
Bus Type
Protocol
CSMA/CD
Windows 98/Me/NT/2000/XP/Server 2003
OS Supported
Linux
Novell 4.x / 5.x / 6.x
Dimensions
Weight
120 mm x 22 mm X 120 mm (L x H x W)
55 g
Operating Temperature 0° to 40°C (32° to 107°F)
Storage Temperature
Operating Humidity
Storage Humidity
EMC Certification
-40° to 70°C (-40° to 158°F)
20% to 95% relative humidity, non-condensing
20% to 95% relative humidity, non-condensing
FCC Class A, CE
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A Advanced Properties
The default settings of the adapter should work in most cases. However, if you experience any unusual
circumstances during your installation, these settings may help you to trouble shoot the adapter. Do not
change any of these settings without a thorough understanding on your network. The following table
briefly explains the function of each property.
Parameter
Description
Value
The IEEE 802.1P signaling method is used for
traffic prioritization at OSI Reference Model
Layer 2. It is implemented in network adapters
and switches for best-effort Quality of Service
(QoS).
Off (default)
On
802.1p Support Port A
All Messages
Errors
None
Status Messages (default)
Warnings
This parameter specifies the messages, which
are to be logged in the Event Log.
Log Status Messages
Maximum Frame Size
Specifies the maximum frame size in bytes that
the driver will support. The performance of
your network usually increases when a large 12-9014
packet size is used. Do not use values larger (default: 1514)
than 1514 if you are not sure the network
structure supports jumbo frames.
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
Autosense (default)
Specify the link speed of the adapter. For
ENW-9607M, this option is fixed to Autosense.
Media Type
Allow the user to configure the network
address of the adapter.
Network Address
Not Present
Defines the number of receive buffers
allocated by the driver. If the system does not
have enough resources, the driver will fail to
load. Increasing this value may improve
performance.
Number Of Receive
Buffers
3-500
(default: 50)
Defines the number of transmit buffers
allocated by the driver. If the system does not
have enough resources, the driver will fail to
load. Increasing this value may improve
performance.
Number Of Transmission
Buffers
4-500
(default: 50)
Link Change
Magic Packet
Specify which method is using to activate the Magic Packet and Pattern
Wake-On-LAN capability. It is only available Match (default)
Wake Up Capabilities
on ENW-9607.
None
OS Controlled
Pattern Match
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|