PE1900
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction ...........................................................................................2
Features.........................................................................................................................................2
Safety Precautions.........................................................................................................................2
Installation..............................................................................................4
Unpacking the Display..................................................................................................................4
Locations and Functions of Controls …………………………… ...............................................4
Connections ………………………………………......................................................................5
Using Your Display ……………………………………… ...................7
Turning the Display On and Off ……..……...………………….. ...............................................7
Tilting the Display ………………………………………………................................................8
Setting the Video Mode ................................................................................................................8
Setting the Refresh Rate ...............................................................................................................8
Minimizing Power Consumption..................................................................................................9
Caring for and Cleaning the Display.............................................................................................9
Adjusting Your Display........................................................................11
Summary of Control Buttons ......................................................................................................11
Displaying the OSD “Main Menu”.............................................................................................11
Selecting Items in the OSD Menu ..............................................................................................12
Adjusting the OSD Menu……………………………................................................................12
Using the Direct Keys.................................................................................................................22
Troubleshooting....................................................................................24
Technical Information .........................................................................26
Display Information....................................................................................................................26
Video Modes ...............................................................................................................................27
Unknown Video Modes...............................................................................................................27
Regulatory Information...................................................................….28
Agency Approval ………………………………………………………………………………28
FCC Statement ...........................................................................................................................28
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The PE1900 LCD monitor has a 19-inch active matrix TFT (thin film transistor) liquid crystal
display module. It is designed for use with any Windows®-based PC.
Features
Ö Automatic configuration to the PC video settings with maximum SXGA resolution.
Ö Three control buttons plus OSD (on-screen display) for monitor settings adjustment and
configuration with ease and instant feedback.
Ö Support analog video input for direct and immediate replacement of CRT displays.
Ö A tilt feature to optimize viewing position.
Ö Flicker-free performance across all recommended video modes.
Ö Support for high refresh rates up to 75 Hz.
Ö VESA DDC2B Plug-and-Display compliant.
Ö A Power-saving feature that is compatible with Microsoft® Windows
For Your Safety
Warning
To completely disconnect power from your display, you must
remove the power cord from the wall outlet and then remove
the power cable from the display.
For your safety and the protection of your monitor, follow these precautions:
Ö Use only the factory-supplied power cord that shipped with your monitor.
Ö To prevent electrical shock, do not disassemble the display. The cover should be removed only
by qualified service personnel.
Ö Do not cover the air vents.
Ö To avoid the risk of damage to the display and electrical shock to yourself, do not expose the
display to rain or moisture.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
If any of the following conditions occur, unplug the display and contact qualified service
personnel:
Ö The power cord or plug is frayed or damaged.
Ö You have spilled liquid into the display.
Ö The display has been exposed to rain or water.
Ö The display does not operate correctly when the operating instructions are followed.
Ö The display has been dropped or the cabinet has been damaged.
*Only for use with supplied adapter, in case of loss or damage contact Planar for replacement
details
*European countries use only with certified power cord 3G , 0.75 mm2 , H05 VV-F
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Please follow the instructions in this chapter to install your LCD Monitor.
Note: Before connecting your display, first read through the instructions in this chapter and
the safety precautions in the previous chapter.
Unpacking the Display
When you are unpacking the display, make sure that you have the following items:
Ö The LCD monitor
Ö AC power adapter with attached power cable
Ö A power cord
Ö Analog video signal cable
Ö User’s Manual
Ö Planar Landing strip
Ö Planar Connection CD-ROM
Note: Place the display on a flat, sturdy surface. Choose an area free from excessive heat,
moisture, and sunlight.
Locations and Functions of Controls
There are three control buttons and one power button on the front panel of the display, as well as a
LED for power status indication.
You will use the power button located at the lower right side of the front panel of your display to turn
on and off the display.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The functions of the three control buttons which are located at the lower left side of the front panel of
your display are described as below:
Button
Select
Function Description
(1) Turn on OSD menu while it is off.
(2) Execute the function selected in the OSD menu.
(3) Hold down for 3 sec will clear OSD menu
(1) Move item selection upward or increase
user-adjustable value.(in Main Menu)
Up (△)
(2) Activate Brightness Menu (Direct-key function).
(1) Move item selection downward or reduce
user-adjustable value (in Main Menu)
Down (▽)
(2) Auto Setup (Direct-key function).
Making the Connections
Before connecting any cables, make sure that the computer and display are turned off.
To connect the power and video signal cables:
1. Locate the AC power adapter with attached power cable.
2. Connect the power cable to the power jack on the back of the display (as shown below).
3. Plug the two-prong power cord into a power outlet, and plug the other end into the AC power
adapter.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Plug the analog video signal cable into the Analog Video Input port on the back of the display
(as shown above).
5. Connect the other end of the video cable into your computer’s video port. (Please check your
computer’s documentation if you’re not sure where the port is located.)
Note: For best display performance, it is strongly recommended that you use Auto Setup to
automatically configure your display’s settings.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Display
This chapter contains information about using your LCD Monitor.
Turning the Display On and Off
Use the power button located at the lower right side of the front panel of the display to turn the
display on and off. When the display is on, the light (LED) near the Power button is illuminated.
The light is green when both the display and PC are active and amber when the display is in
power-saving mode.
If your PC supplies power saving signals to the display, the display’s power management features
reduce power consumption to low levels when your PC goes into its power-saving mode. See
“Minimizing Power Consumption” on page 9 for more information.
If your PC doesn’t use industry standard power-saving techniques, you can reduce power
consumption by turning off the display when it won’t be used for an extended period. You can turn
the display off even if you leave your PC in running.
Note:
Because of the technology used in LCD panels, screen savers will not prolong the life of
your display. Be sure to turn off the display if it will not be used for an extended period.
Warning
To completely disconnect power from your display, you must
remove the power cord from the wall outlet and then remove
the power cable from the display.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Tilting the Display
The monitors have a tilt feature that allows you to tilt the display back and forth to find the most
comfortable viewing position. To tilt the display, grasp the sides and push the display back or pull
it toward you, or turn it left or right until it is in the desired position. The display can be tilted 20º
backward and 5º forward.
Note: Do not tilt the display by grasping the top edge.
Setting the Video Mode
Since the inherent format of this display is 1280 pixels by 1024 lines, the display will perform best
when your PC is set to a screen resolution of 1280 x 1024. If you use a lower resolution (such as
640 x 480), the image is expanded to fill the screen.
Your display supports many common video modes, as shown in “Video Modes” on page 27. Check
the documentation supplied with your PC and video adapter card to find out which modes they
support.
To see what the video mode in your Microsoft Windows, please check Windows’ settings in your
PC.
Setting the Refresh Rate
The image refresh rate is the number of times per second that the image is refreshed; it is also
known as the vertical frequency.
On standard CRT displays, you should use the highest possible refresh rate supported by your PC
at the current screen resolution. This is necessary to avoid screen flickering and to minimize
eyestrain. However, with your LCD Monitor, flicker is not an issue. It is flick-free at all supported
refresh rates.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
The table in “Video Mode” on page 27 shows the image refresh rates supported by the display at
different screen resolution. Although your LCD monitor supports up to 75 Hz for analog video
input, we recommend that you use 60 Hz refresh rate for best performance.
To set the refresh rate with a standard Windows installation, follow the steps mentioned in your
Windows or graphic card user’s manual.
Minimizing Power Consumption
Many PCs support industry standard power-saving techniques. Power management features
reduce the display’s power consumption after a period of keyboard and mouse inactivity.
When the display is in a power-saving mode, the screen is blank and the power indicator is amber.
Pressing a key on the keyboard or moving the mouse restores the image in several seconds.
Consult your PC documentation for information about setting the power-saving modes.
The display accepts the signals for standard power-saving mode: When the PC goes into power
saving mode, the display will also go into power-saving mode.
Caring for and Cleaning the Display
To maximize screen life and prevent damage to the LCD panel, we recommend that you:
Ö Use the display power management system (if available on your PC).
Ö If you don’t use a power management system, turn off the display when you won’t be using it
for an extended period.
Ö Don’t press, rub, or poke the display with your finger or other object.
Ö Handle your display with care.
Your LCD module is a high-quality optical device that requires special care when cleaning.
Warning
Don’t use liquid, aerosol, or abrasive cleaning solutions to
clean the screen.
To clean the screen:
1. Shut down the PC.
2. Turn off and unplug the display.
3. Gently dust the screen with a dry, soft, line-free cloth.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If the screen is still dirty, you can dampen the cloth with several drops of distilled water.
Make sure the LCD panel is completely dry before you turn the display back on.
4. Plug in the display.
5. Turn on your PC and display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Display
This chapter contains information about how to change display settings for your LCD Monitor. It
is designed with an OSD menu to help you easily adjust to its optimum performance.
Note: You must perform auto-setup before making any adjustments.
Summary of Control Buttons
There are four control buttons located at the lower part of the front panel of your display:
Ö POWER: Push to turn on or turn off the display. The power indicator (Green) will light while
the display is on.
Ö Select: Display the On-Screen Display (OSD) “Main Menu” , selects items for user adjustment,
and execute the function selected.
Note: Hold down this key for 3 seconds to clear the OSD menu.
Ö Up(△): Move upward through the choice in the OSD submenu. If an adjustment bar is
displayed, this button increases the setting value.
Note: This key is also used as a ‘direct key’ to activate the “Brightness Adjust” feature.
Ö Down(▽): Move downward through the choice in the OSD submenu. If an adjustment bar is
displayed, this button decreases the setting value.
Note: This key is also used as a ‘direct key’. When the OSD “Main Menu” is inactive, pressing
this key will execute ‘Auto Setup’ function.
Displaying the OSD “Main Menu”
You can use the OSD features to change the screen settings of your display. To display the OSD
“Main Menu”, press the ‘Select’ button.
The following table briefly describes each of the items in the OSD “Main Menu”.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Auto
Description
Adjust the “Auto Setup”. See “Adjusting Auto Setup” on page 12.
Open the “Management” submenu to select Brightness, Contrast or Image
Position for further adjustment. See Adjustment in the “Management”
Submenu on page 13.
Management
Clock/Phase
Color
Open the “Clock/Phase” submenu to select Clock or Phase for further
adjustment. See Adjustment in the “Clock/Phase” Submenu on page 16.
Open the “Color” submenu where you can select Color Temperature, RGB
and Black Level for further adjustment. See Adjustment in the “Color”
Submenu on page 17.
Open the “OSD Display” submenu to select Horizontal or Vertical position
in the OSD display for further adjustment. See Adjustment in the “OSD
Display” Submenu on page 19.
OSD Display
Factory Recall
Languages
Exit
Recall the original factory-setting values. See “Factory Recall” on page 20.
Open the “Languages” submenu where you can select one of the five
languages for your preference in display OSD messages. See “Selecting
your preferred Language” on page 21.
Clear and exit the OSD main menu.
Selecting Items in the OSD Menu
To select items in the OSD “Main Menu”, you will use the ‘Up (△)’ or ‘Down (▽)’ buttons on
the front panel of the display.
To select items in the OSD submenus, you will use all three control buttons. To select a specific
submenu, use ‘Up (△)’ or ‘Down (▽)’ buttons to move forward or backward to the item to be
adjusted, and then select by pressing the ‘Select’ button.
Adjusting the OSD Menu
Auto Setup
To perform the Auto Setup function you should follow the steps below:
1. Bring-up the OSD “Main Menu”.
2. The ‘Auto’ icon will be highlighted.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use ‘Select’ button to select and execute the Auto Setup function. After the execution of the
Auto Setup function, it will show the following message:
If the image looks correct, choose ‘Yes’.
OR
If the image requires further adjustment, choose No. This will activate the ‘Phase’ bar for
further manual adjustment. Adjust the phase using the ‘Up (△)’ or ‘Down (▽)’buttons. When
all text appears well focused and the image is stable, press the ‘Select’ key to finalize the
adjustment.
Adjusting the “Management” Submenu
Follow the steps below to adjust settings in the “Management” submenu:
1. Activate the OSD “Main Menu”.
2. Use ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the management icon and
highlight it.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use ‘Select’ key to enter the “Management” Submenu. This activates four items for
adjustment.
If ‘Brightness’ is selected, use ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of
brightness. The graphic bar and numerical value at the right corner responds accordingly.
If ‘Contrast’ is selected, use ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of contrast.
The graphic bar and numerical value at the right corner responds accordingly.
Note: We recommend performing the Auto-Setup before adjusting the contrast setting.
If ‘H. position’ is selected, use ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of the
horizontal position of the image. The graphic bar and numerical value at the right corner
14
Download from Www.Somanuals.com. All Manuals Search And Download.
responds accordingly.
If ‘V. position’ is selected, use ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of the
vertical position of the image. The graphic bar and numerical value at the right corner responds
accordingly.
Select ‘Exit’ to exit the “Management” submenu and return to the “Main Menu”.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the “Clock/Phase” Submenu
Follow the steps below to adjust the “Clock/Phase” submenu:
1. Activate the OSD “Main Menu”.
2. Use ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the clock/phase icon and
highlight it.
3. If ‘Clock’ is selected, use ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of clock. The
graphic bar and numerical value at the right corner responds accordingly.
Note: We recommend performing the Auto-Setup first. Adjust the clock setting only if the
image looks incorrect.
If ‘Phase’ is selected, use ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of phase. The
graphic bar and numerical value at the right corner responds accordingly.
Note: We recommend performing the Auto-Adjust before adjusting the phase.
Select ‘Exit’ to exit the “Clock / Phase” submenu and return to the “Main Menu”.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the “Color” Submenu
Follow the steps below to adjust the “Color” submenu:
Activate the OSD “Main Menu”.
1. Use ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the color icon and highlight
it.
2. Use ‘Select’ button to enter the “Color” submenu. This activates three items for further
adjustment.
If ‘Color Temp’ is selected, use ‘Up (△)’ or ‘Down (▽)’ buttons to select one of the three
settings. Press ‘Select’ to return to the “Color” submenu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: As you choose an item, your screen immediately updates to reflect this setting.
Selecting ‘Black Level Adjust’ activates the “Back Level Adjust” submenu. Adjust its setting
by using the ‘Up (△)’ and ‘Down (▽)’ buttons.
If ‘RGB Adjust’ is selected, the “RGB Adjust” submenu is activated. Use the ‘Up (△)’ or
‘Down (▽)’ buttons to choose and highlight one of the three options (Red, Green and Blue)
and then use ‘Select’ button to select it. This will activate the corresponding bar on menu, and
is adjusted using the ‘Up (△)’ and ‘Down (▽)’ buttons. This control may be helpful in
achieving a more natural appearance in graphic images and closer color matching between the
printer and the display.
Select ‘Exit’ to exit the “Color” submenu and return to the “Main Menu”.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the “OSD Display” submenu
Follow the steps below to adjust the OSD Horizontal and Vertical positions:
1. Activate the OSD “Main Menu”.
2. Use ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the OSD display icon and
highlight it.
3. Use ‘Select’ button to enter the “OSD Display” submenu. This activates two items for further
adjustment.
If ‘H. Position’ is selected, use the ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of
Horizontal position of the OSD display. The graphic bar and numerical value at the right
corner responds accordingly.
If ‘V. Position’ is selected, use the ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of V.
position of the OSD display. The graphic bar and numerical value at the right corner responds
accordingly.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Select ‘Exit’ to exit the “OSD Display” submenu and return to the “Main Menu”.
Adjusting the Factory Recall
To recall factory settings back you should follow the steps below:
1. Activate the OSD “Main Menu”.
2. Use ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the factory recall icon and
highlight it.
3. Use ‘Select’ button to activate the factory recall action.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting your preferred Language
Follow the steps below to select one of the five languages:
1. Activate the OSD “Main Menu”.
2. Use ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the languages icon and
highlight it.
3. Use the ‘Select’ button to enter the “Language” submenu. This activates five items for
selection. Use the ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the language
you prefer and press ‘Select.’
Note: As you choose an item, your OSD information displayed immediately updates to
reflect this setting.
Exit and Clear the OSD Menu
Use the ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the exit icon and select it by
choosing the ‘Select’ button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Direct Keys
There are two direct keys that function while OSD “Main Menu” is inactivated: “Auto-Setup” and
“Brightness.”
Using the “Auto Setup” Direct Key
Use Auto-Setup whenever you apply a new video mode or change the refresh rate. While the Auto-
Setup routine is running, ensure a stable image is displayed on the screen. Do not move items
around the screen, play games, or view video during Auto-Setup.
Once you have executed Auto Setup for a particular mode, the display will store the new values in
its permanent memory.
To execute Auto Setup by direct key
1. Press ‘Down (▽)’ button with no OSD “Main Menu” displayed on screen, this will start the
execution of Auto Setup.
The image will change color and appear to jitter during the Auto Setup function. After the
function is complete, you are asked whether the image appears correct or not.
2. If the image looks correct, choose ‘Yes’, and then the OSD will close automatically.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
If the image requires further adjustment, choose No, and the ‘Phase’ bar is activated for further
manual adjustment. Adjust the phase using ‘Up (△)’ or ‘Down (▽)’ buttons. When all text
appears well-focused and the image is stable, press the ‘Select’ key to end the adjustment and
close the OSD menu.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
This chapter contains information about how to troubleshoot your LCD Monitor. If you have tried
all of the items listed below, please contact qualified service personnel.
A. My display doesn’t work, even though the computer appears to work.
1. Make sure the power cable is securely plugged into the display.
2.Make sure the display is turned on.
3.Try turning the display off and then turning it on again.
4.Make sure the display’s power cord is plugged into a power outlet and into the AC power
adapter. Check to see whether the outlet works by plugging another device (such as a lamp)
into the outlet. (If the light on the front of the display is lighted, it is getting power. Try the
next item on this procedure.)
5.Check the cable connection between the display and the computer. The cable connectors must
be pushed in all the way.
B. The message “Check Cable” appears on my display.
This message appears when the video cable is not properly connected to the computer.
1. Make sure the analog video cable is plugged into the Analog Video Input port on the back of
the display.
2.Make sure the other end of analog video cable is plugged into the PC’s video port.
C. The message “No Sync” appears on my display.
This message appears when there is no video signal from the computer with cable already
connected.
1. Make sure that the computer's power is turned on.
2. Make sure that your graphic card is appropriately set-up.
D. The message “Signal Out Of Range ” appears on my display.
This message appears when the input signal is beyond the display's capability.
Set your PC to a supported video mode, preferably 1280 x 1024 at 60 Hz. See “Setting the Video
Mode” on page 8.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
E. The image is very unstable.
1. Set your PC to a supported video mode, preferably 1280 x 1024 at 60 Hz. See “Setting the
Video Mode” on page 8.
2.Restore the original factory settings by choosing Factory Recall in the OSD “Factory
Recall” submenu.
3.Perform the Auto Setup function. See “Auto Setup by Direct Key” on page 22.
Note: Even if your PC’s setting is out of the range of video modes that are supported by your
LCD monitor, it may still be displayed with reduced quality. This provides you with an
opportunity to change your PC’s setting to a correct one.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Information
This chapter contains technical information about your LCD Monitor.
Display Information
LCD Module
19-in, active matrix TFT, anti-glare coating, 0.294 mm pixel pitch.
Display Size
14.8 (H) x 11.9 (V) inches.
Viewing Angle
Left / Right
Up / Down
-85° / 85°(Typical).
-85° / 85°(Typical).
Display Colors
Power Input
16.7 million.
100 ~ 240 V , 1.2A. Full Range, 50/60 Hz (External AC adapter).
ac
Maximum/ Standby
power consumption
< 35 / 3. Watts
Signal Input
Video Signal
Sync signals
RGB positive 0.7VPP, 75ohm.
Separate & Composite, TTL Level.
Line (horizontal)
frequency
31.5 kHz ~ 80 kHz.
Raster (vertical)
frequency
56 Hz ~ 75 Hz.
Pixel dot clock
135 MHz (maximum).
Recommended mode 1280 x 1024 @ 60 Hz.
-5° forward, 20° backward.
Pedestal tilt
Dimensions
(W x H x D)
without stand： 17.4(W) x 2.2 (D) x 15.4 (H) inches.
with stand：17.4(W) x 7.9 (D) x 16.4 (H) inches.
Weight
14.1 pounds
Operating Conditions
Temperature
5° ~ 40°C at altitude 0 ~ 6500 feet
5° ~ 30°C at altitude 6500 ~ 10000 feet
20% ~ 85% RH, non-condensing
Humidity
Storage Conditions
Temperature
Humidity
-20° ~ 60°C
5% ~ 95% RH
33000 feet Max.
Altitude
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Modes
Your LCD monitor supports the following industry-standard combinations of screen resolution
and refresh rates. Other combinations are possible, but may require adjustments to the image.
For optimum performance, set your PC to a screen resolution of 1280 x 1024 at a 60 Hz refresh
rate.
Display Mode
Mode No. H. sync. (Hz)
V. sync.
(Hz)
Dot Frequency
(Hz)
VGA 640 x 350
640 x 480
1
2
3
4
31.5k
31.5k
37.9k
37.5k
70
60
72
75
25.175M
25.175M
31.5M
640 x 480
640 x 480.
31.5M
SVGA 800 x 600
5
6
7
35.1k
37.9k
48.1k
46.9k
56
60
72
75
36.0M
40.0M
50.0M
49.5M
8
XGA 1024 x 768
SXGA 1280 x 1024
9
10
11
48.4 k
56.5k
60.0k
60
70
75
65.0 M
75.0M
78.75M
12
13
63.981k
79.976k
60
75
108M
135M
US TEXT
720 x 400.
14
31.5 k
70
28.3 M
POWER MAC
640 x 480
15
16
35.0k
49.7k
67
75
30.5M
57.3M
832 x 624.
Note: The display is capable of going beyond these recommended modes.
Unknown Video Modes
Like all other monitors, your LCD monitor is designed to work with standard video modes.
However, not all video/graphic cards use only standard display modes.
Your LCD monitor uses state-of-the-art technology, which is designed to synchronize to any
display mode. We recommend choosing one of the supported modes listed above. If you choose an
unknown mode, you will need to manually adjust the clock, phase, and image position.
If you must use an unknown mode, run the Auto-Setup first. If Auto-Setup doesn’t provide
adequate image adjustment, then the clock, phase, horizontal position, and vertical position must
be adjusted manually.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Agency Approvals
European
USA
Japan
Others
CE
UL
CSA
Safety
FCC Class
B .DOC
Emissions
Immunity
Ergonomic
EPA
YES
FCC Statement: FCC Notice – Part 15
This device complies with Part 15 of FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause
undesired operation.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|