AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
VSX-D514
VSX-D714
VSX-D814
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your
model properly. After you have finished reading the instructions, put them in a safe place for
future reference.
01 Before you start
04 Controls and displays
Checking what’s in the box . . . . . . . . . . . . 5
Making cable connections . . . . . . . . . . . . . 5
Loading the batteries . . . . . . . . . . . . . . . . . 5
Operating range of remote control unit . . . 6
Front panel (VSX-D514) . . . . . . . . . . . . . . .27
Front panel (VSX-D714/D814) . . . . . . . . . .29
Display . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Remote control . . . . . . . . . . . . . . . . . . . . .32
02 5 minute guide
05 Listening to your system
Introduction to home theater . . . . . . . . . . . 7
Listening to Surround Sound . . . . . . . . . . . 8
Using the Quick Setup . . . . . . . . . . . . . . . 12
Listening in surround sound . . . . . . . . . . .36
Using the Advanced surround effects . . .37
Listening in stereo. . . . . . . . . . . . . . . . . . .38
Choosing the input signal . . . . . . . . . . . . .38
Using the Surround Back Channel
03 Connecting up
(SB CH) . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Using the Virtual Surround Back mode
Audio/Video cords . . . . . . . . . . . . . . . . . . 14
S-video cables . . . . . . . . . . . . . . . . . . . . . 14
Component video cords . . . . . . . . . . . . . . 14
Digital audio coaxial cords/Optical
(VSB). . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Using Midnight and Loudness listening . .41
Using the tone controls . . . . . . . . . . . . . . .41
Playing other sources . . . . . . . . . . . . . . . .42
Selecting the multichannel analog
inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
VSX-D514 model:. . . . . . . . . . . . . . . . . . .42
VSX-D714/D814 model: . . . . . . . . . . . . . .42
Using the sleep timer . . . . . . . . . . . . . . . .43
cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting digital components . . . . . . . . 15
Connecting audio components . . . . . . . . 16
Connecting DVD 5.1 channel
components. . . . . . . . . . . . . . . . . . . . . . . 17
Connecting video components. . . . . . . . . 18
Connecting to the front panel video
terminal . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting antennas. . . . . . . . . . . . . . . . 19
FM wire antenna . . . . . . . . . . . . . . . . . . 19
AM loop antenna . . . . . . . . . . . . . . . . . . 19
Using external antennas . . . . . . . . . . . . 19
Connecting the speakers
(VSX-D514/D714) . . . . . . . . . . . . . . . . . . . 20
Connecting the speakers (VSX-D814) . . . . 21
Speaker terminals . . . . . . . . . . . . . . . . . 22
A and B speaker systems. . . . . . . . . . . . 22
Hints on speaker placement . . . . . . . . . 22
Speaker placement diagrams . . . . . . . . 23
Connecting additional amplifiers . . . . . . . 24
Power cord caution . . . . . . . . . . . . . . . . 25
Operating other Pioneer components . . . 25
Using this receiver with a Pioneer
06 Setting up the receiver
Choosing your receiver setup . . . . . . . . . .44
Speaker setting . . . . . . . . . . . . . . . . . . . .46
Surround back speaker setting . . . . . . . .46
Subwoofer setting . . . . . . . . . . . . . . . . . .47
Crossover frequency setting . . . . . . . . . .47
LFE attenuator setting. . . . . . . . . . . . . . .47
Front speaker distance setting . . . . . . . .48
Front left speaker distance setting . . . . .48
Center speaker distance setting . . . . . . .48
Front right speaker distance setting . . . .48
Surround speaker distance setting . . . . .48
Surround right speaker distance
setting. . . . . . . . . . . . . . . . . . . . . . . . . . .49
Surround back speaker distance
plasma display . . . . . . . . . . . . . . . . . . . . . 26
setting. . . . . . . . . . . . . . . . . . . . . . . . . . .49
Surround left speaker distance setting . .49
Subwoofer distance setting. . . . . . . . . . .49
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic range control setting. . . . . . . . 50
Dual mono setting . . . . . . . . . . . . . . . . . 50
Component video input settings . . . . . . 50
Digital input settings . . . . . . . . . . . . . . . 50
SR+ control for Pioneer plasma
displays . . . . . . . . . . . . . . . . . . . . . . . . . 51
Manually calibrating your listening area
(MCACC) . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting separate channel levels for
Preset Code List (VSX-D514/D714). . . . . . .66
Preset Code List (VSX-D814) . . . . . . . . . . .68
10 Additional information
Troubleshooting . . . . . . . . . . . . . . . . . . . .70
Resetting the main unit . . . . . . . . . . . . . . .72
Switching the speaker impedance. . . . . . .72
Specifications . . . . . . . . . . . . . . . . . . . . . .73
Amplifier section. . . . . . . . . . . . . . . . . . .73
Audio section . . . . . . . . . . . . . . . . . . . . .73
Video Section . . . . . . . . . . . . . . . . . . . . .73
Component video section . . . . . . . . . . . .73
FM Tuner Section . . . . . . . . . . . . . . . . . .74
AM Tuner Section . . . . . . . . . . . . . . . . . .74
Miscellaneous. . . . . . . . . . . . . . . . . . . . .74
Cleaning the unit. . . . . . . . . . . . . . . . . . .74
listening modes . . . . . . . . . . . . . . . . . . . . 53
Using the SR+ mode with a Pioneer
plasma display . . . . . . . . . . . . . . . . . . . . . 54
07 Using the tuner
Listening to the radio . . . . . . . . . . . . . . . . 56
Improving FM stereo sound . . . . . . . . . . 56
Tuning directly to a station. . . . . . . . . . . 56
Saving station presets . . . . . . . . . . . . . . . 57
Naming station presets . . . . . . . . . . . . . 58
Listening to station presets . . . . . . . . . . 58
Changing the frequency step . . . . . . . . . . 58
"DTS" ,"DTS-ES Extended Surround" and
"Neo:6" are trademarks of Digital Theater
Systems, Inc.
Manufactured under license from Dolby
Laboratories. "Dolby", "Pro Logic",
"Surround EX", and the double-D symbol
are trademarks of Dolby Laboratories.
08 Making recordings
Making an audio or a video recording . . . 59
09 Controlling the rest of your
system
Setting the remote to control other
For U.S. and Australia Model
components. . . . . . . . . . . . . . . . . . . . . . . 60
Selecting preset codes directly. . . . . . . . . 60
Programming signals from other
remote controls . . . . . . . . . . . . . . . . . . . . 61
Erasing all of your programmed
settings . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Clearing all the remote control settings . . 62
Direct function . . . . . . . . . . . . . . . . . . . . . 62
Controls for TVs . . . . . . . . . . . . . . . . . . . . 63
Controls for other components. . . . . . . . . 64
C67-7-3_En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
CBhaepfteor 1r: e you start
Checking what’s in the box
Please check that you've received the
following supplied accessories:
• AM loop antenna
• FM wire antenna
• Dry cell batteries (AA size IEC R6) x2
• Remote control
• Power cords (make sure you use the
correct cord for your country/region):
VSX-D514/D714/D814-K (black models)
Round 2-pin type and Australian type
Loading the batteries
VSX-D514/D714-S (silver models)
Round 2-pin type, flat blade 2-pin type and
UK 3-pin type (Except Australian model)
VSX-D814-S (silver model)
Round 2-pin type, flat blade 2-pin type, UK
3-pin type and Australian type
• Power plug adaptor (VSX-D514/D714/
D814-K only) x1
• J-shape plug (VSX-D514/D714/
D814-K only) x1
Incorrect use of batteries may result in such
hazards as leakage and bursting. Observe the
following precautions:
• These operating instructions
• Never use new and old batteries together.
Making cable connections
• Insert the plus and minus sides of the
batteries properly according to the marks
in the battery case.
Make sure not to bend the cables over the top
of this unit (as shown in the illustration). If this
happens, the magnetic field produced by the
transformers in this unit may cause a
• Batteries with the same shape may have
different voltages. Do not use different
batteries together.
humming noise from the speakers.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before you start
Operating range of remote
control unit
The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver's remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that
is emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
30
30
7m
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5 minute guide
02
C5hampteri2n: ute guide
Introduction to home theater
You are probably used to using stereo equipment to listen to music, but may not be used to
home theater systems that give you many more options (such as surround sound) when
listening to soundtracks.
Home theater refers to the use of multiple audio tracks to create a surround sound effect,
making you feel like you're in the middle of the action or concert. The surround sound you get
from a home theater system depends not only on the speakers you have set up in your room, but
also on the source and the sound settings of the receiver.
DVD-Video has become the basic source material for home theater due to its size, quality, and
ease of use. Depending on the DVD, you can have up to seven different audio tracks coming
from one disc, all of them being sent to different speakers in your system. This is what creates
a surround sound effect and gives you the feeling of ‘being there’.
This receiver will automatically decode Dolby Digital, DTS, or Dolby Surround DVD-Video discs,
according to your speaker setup. In most cases, you won’t have to make changes for realistic
surround sound, but other possibilities (like listening to a CD with multichannel surround
sound) are explained in Listening to your system on page 36.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 minute guide
Listening to Surround Sound
This receiver was designed with the easiest possible setup in mind, so with the following quick
setup guide, you should have your system hooked up for surround sound in no time at all. In
most cases, you can simply leave the receiver in the default settings.
Be sure to complete all connections before connecting this unit to the AC power source.
1
Hook up your DVD player.
For surround sound, you’ll want to hook up using a digital connection from the DVD player to
the receiver. You can do this with either a coaxial, or an optical connection (you don’t need to
connect both). If you hook up using an optical cable, you should refer to Digital input settings
on page 50 to assign the optical input to DVD.
Use a video cord to connect the video output on your DVD player to the receiver using the jacks
shown below.
2
Hook up your TV.
Use a video cord to connect your receiver to the TV using the jacks as shown below.
Optical cable
VIDEO IN
Video cord
TV
DIGITAL
OUT
OPT
This receiver*
OPT
2
CEN-
TER
DIGITAL OUT
SUB WOOFER
Coaxial
cable
AUX
CD
IN
COMPONENT VIDEO
A
D
S
V
S
D
I
/
G
L
N
D
A
)
B
I
L
N
E
SURROUND
BACK
L
L
(
¥
FM UNBAL
75
AM
(CD-R/TAPE/MD)
DIGITAL OUT
Ω
LOOP
A
N
T
E
N
N
A
O
P
T
I
N
MONITOR OUT
R
L
MONITOR OUT
OPT
1
OUT
SURROUND
OPT
CONTROL
IN
DVD 5.1CH INPUT
OUT
DVR/
VCR
(TV
/
2
Y
P
R
Y
P
A
B
P
R
R
O
R
C
E
N
T
E
R
SAT)
(
T
V
/
S
T
)
PREOUT
I
N
ø
F
R
N
T
SURROUND
(
D
V
R
/
V
C
R
)
OUT
IN
IN
IN
VIDEO
OPT
DVR/
VCR
ROUND BACK
SURROUND
FRONT
ASSIGNABLE
COAX
2
(CD)
IN
IN
L
R
L
R
L
1
S
P
E
T
V
/
T
OUT
SA
(
T
V
/
T
IN
VIDEO
GITAL
SA
)
N
ASSIGNABLE
DIGITAL IN
COAX
DVD
LD
FRONT
MONITOR
OUT
T
V
/
/
2
SAT
IN
OUT
A
A
I
N
G
L
E
(
C
D
)
D
V
D
STRUCTION
B
D
V
D
P
L
A
Y
E
R
COAX
5.1CH
REC INPUT
ANUAL
SUB
COAX
WOOFER
DVD
/LD
1
1
IN
CD-R
TAPE
E
PREOUT
OUT
IN
(
D
V
D
IN
Î
4
1
¡
¢
7
8
/
STANDBY/ON
(DVD
IN
/
L
D
)
0
3
/
MD
MONITOR
OUT
S-VIDEO
R
S
/LD)
PLAY
R
AUDIO
L
SUB
DVD player
WOOFER
PREOUT
IN
DVD
LD
FRONT
VIDEO OUT
/
D
V
D
S
5.1CH
REC INPUT
IN
CD-R
TAPE
/
/
MD
Video cord
* The illustration shows the VSX-D814, but connections for the VSX-D514/D714 are the same.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5 minute guide
02
3
Connect your speakers.
A complete setup of speakers is shown here (six speakers for the VSX-D514/D714, and eight for
the VSX-D814), but different home setups may vary. Simply connect the speakers you have in
the manner shown below. The receiver will work with just two stereo speakers (the front
speakers in the diagram) but using at least three speakers is recommended, and a complete
setup is best.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left
to the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver
match those on the speakers. You can use speakers with a nominal impedance between 6–16Ω
(please see Switching the speaker impedance on page 72 if you plan to use speakers with an
impedance of less than 8Ω).
Front speakers
Center speaker
C
Surround speakers
L
R
LS
RS
CEN-
SUB WOOFER
TER
AUX
IN
COPONENT VIDEO
ASSIGNABLE
(
FM UNBAL
75
D
V
D
/
LD IN
¥
AM
LOOP
DIGITAL OU
Ω
ANTENNA
R
L
MONITOR O
MONITOR OUT
OUT
SURROUND
CONTROL
IN
DVD 5.1CH INUT
OUT
DVR/
VCR
P
B
P
R
Y
P
B
PR
(
)
T
V
/
S
A
T
IN
ø
OUT
DIGITAL IN
IN
IN
IN
VIDEO
OPT
DVR/
VCR
FROT
CENTER
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
1
S
P
E
TV
/
OUT
SAT
(T
V
/
IN
SAT
)
ASSIGNABLE
COAX
2
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
SAT
IN
A
A
K
(CD)
D
V
D
B
5.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
/LD
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(DVD
/
IN
/
L
D)
SURROUND
BACK
/
MD
S-VIDEO
PLAY
R
AUDIO
L
VSX-D714
Powered subwoofer
SW
INPUT
* The illustration shows the VSX-D714, but connections for the VSX-D514 are the same.
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 minute guide
Front speakers
Center speaker
C
Surround speakers
LS RS
Surround back speakers
L
R
SBL
SBR
CEN-
SB WOOFER
TER
AUX
CD
IN
CMPONENT VIDEO
ASSIGNABLE
SURROU
BA
L
L
(
D
V
D
/
LD) IN
¥
FM UNBAL
AM
LOOP
DIGITAL OUT
75
Ω
ANTENNA
MONITOR OUT
OPT N
MONITOR T
OUT
SURROND
OPT
CONTROL
IN
DVD 5.1CH NPUT
OUT
DVR/
VCR
2
CENT
PREOU
P
B
P
R
Y
P
B
P
R
R
R
(T
V
/
S
A
T
)
IN
ø
FRONT
SURROUND
(DVR/VCR)
OUT
IN
IN
IN
VIDEO
OPT
DVR/
VCR
FROT
CENTER
SURROUND BACK
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
R
L
1
S
P
E
TV
/
OUT
SAT
(
T
V
/
T
IN
SA
)
ASSIGNABLE
DIGITAL IN
COAX
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
2
SAT
IN
A
A
K
S
I
N
L
E
(
C
D
)
D
V
D
SEE INSTRCTION
B
5.1CH
REC INPUT
MANL
SUB
COAX
DVD
/LD
1
IN
CD-R
TAPE
E
R
S
PREOUT
OUT
IN
(
D
V
D
)
/
IN
/
L
D
/
MD
SIDEO
PLAY
R
AUDIO
L
VSX-D814
Passive
subwoofer
or single
surround
back
Powered subwoofer
SW
TV
AUDIO IN
INPUT
speaker
• If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on
page 46) to large.
VSX-D814 only
• To use the speaker on your TV as the center speaker (C), connect the CENTER PREOUT jack
on this unit to the audio input jack on your TV. In this case the center speaker shown is
unnecessary.
• If you are using only one surround back speaker, connect the positive wire to the right
channel (+) terminal, and the negative wire to the left channel (–) terminal (shown below).
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5 minute guide
02
• If you select subwoofer (SB SW) in the Surround back speaker setting on page 46 you can
hook up a subwoofer instead of speakers to the surround back speaker terminals. Connect
the wires just as above (and as shown below), connecting the positive wire to the right
channel (+) terminal, and the negative wire to the left channel (–) terminal.
Surround back
speaker (or
subwoofer)
VSX-D814
SURROUND BACK
R
L
4
Plug in the receiver and switch it on, followed by your DVD player, your subwoofer
and the TV.
Make sure you’ve set the video input on your TV to this receiver. Check the manual that came
with the TV if you don’t know how to do this.
Also make sure that DVD/LD is showing in the receiver’s display, indicating that the DVD input
is selected. If it isn’t, press DVD on the remote control to set the receiver to the DVD input.
5
Press QUICK SETUP on the front panel to specify your speaker setup, room size and
listening position.
Use the MULTI JOG dial to select and ENTER to confirm your selection. See Using the Quick
Setup on page 12 if you’re unsure about the settings.
6
Play a DVD, and adjust the volume to your liking.
There are several other sound options you can select. See Listening to your system on page 36
for more on this. See also Choosing your receiver setup on page 44 for more setup options.
• Depending on your DVD player or source discs, you may only get digital 2 channel stereo
and analog sound. In this case, the listening mode must be set to STANDARD (it should
already be set—see Listening in surround sound on page 36 if you need to do this) if you
want multichannel surround sound.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 minute guide
* VSX-D814 only
Using the Quick Setup
If a subwoofer wasn’t detected in step 2, you
can cycle between the following choices:
You can use the Quick Setup to get your
system up and running with just a few button
presses. The receiver automatically makes
the necessary settings after you have selected
your speaker setup, room size and listening
position.
2.0ch
3.0ch
4.0ch
7.0ch*
6.0ch
5.0ch
If you want to make more specific settings,
refer to Choosing your receiver setup on
page 44.
* VSX-D814 only
VSX-D514 – Cycle between the following
choices:
Use the front panel controls for the steps
below.
5.1ch
2.1ch
5.0ch
3.0ch
4.1ch
3.1ch
MULTI JOG
2.0ch
4.0ch
ENTER
MASTER VOLUME
MULTI JOG
QUICK SETUP
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TONE
SPEAKERS
DOWN
UP
• Check the table below to find the speaker
setup that corresponds with your system.
TENING MODE
MMER
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
1
If the receiver is off, press
ꢀ STANDBY/ON to turn the power on.
2
Press QUICK SETUP.
VSX-D714/D814 only – SW DET flashes in the
display while the receiver checks your setup
for a subwoofer. SW YES or SW NO confirms
the subwoofer check, then the display
prompts you to select your speaker setup.
3
Use the MULTI JOG dial to choose your
speaker setup.
VSX-D714/D814 – When a subwoofer was
detected in step 2, you can cycle between the
following choices:
* VSX-D714/D814 only
2.1ch
3.1ch
** VSX-D814 only
4.1ch
7.1ch*
5.1ch
6.1ch
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5 minute guide
02
4
5
Press ENTER.
Use the MULTI JOG dial to choose your
room size.
Depending on the distance of your speakers
from the listening position, choose between
small, medium, or large (S, M or L), M being
an average-sized room.
6
Press ENTER.
7
Use the MULTI JOG dial to choose your
listening position.
You can cycle between the following choices:
FWD
MID
BACK
FWD – If you are nearer to the front
speakers than the surround speakers
MID – If you are equal distance from the
front and surround speakers
BACK – If you are nearer to the surround
speakers than the front speakers
8
Press ENTER to confirm your setup.
The display shows the speaker setup, room
size and listening position that you have
selected.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Connecting up
CChoaptnern3:ecting up
Component video cords
VSX-D714/D814 only
• Before making or changing any
connections, switch off the power and
disconnect the power cord from the AC
outlet.
Use component video cords to get the best
possible color reproduction of your video
source. The color signal of the TV is divided
into the luminance (Y) signal and the color
(PB and PR) signals and then output. In this
way, interference between the signals is
avoided. Connect from the component video
jacks on the rear of the receiver to the compo-
nent video jacks on the video component you
are hooking up.
Audio/Video cords
Use audio/video cords (not supplied) to
connect the audio/video components and a
video cord to connect the monitor TV.
Connect red plugs to R (right), white plugs to
L (left), and the yellow plugs to VIDEO.
Y
Be sure to insert completely.
PB
R
Green
L
PR
Blue
VIDEO
Red
Digital audio coaxial cords/
Optical cables
Commercially available digital audio coaxial
cords (standard video cords can also be used)
or optical cables (not supplied) are used to
connect digital components to this receiver.
S-video cables
Use S-video cables (not supplied) to get
clearer picture reproduction than regular
video cords.
Be sure to insert completely.
Connect from an S-video jack on the rear of
the receiver to an S-video jack on the video
component you are hooking up.
Digital audio coaxial cord
(or standard video cord)
Optical cable
Be sure to insert completely.
S VIDEO
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
03
Connecting digital components
The easiest way to hook up this receiver for surround sound is to use a digital input. You can do
this by either coaxial or optical connections (you do not need to do both). The quality of these
two types of connections is the same but since some digital components only have one type of
digital terminal, it is a matter of matching like with like (for example, the coaxial output from the
component to coaxial input on the receiver).
The VSX-D514/D714 has three digital inputs on the rear panel (two coaxial inputs and an optical
input) and the VSX-D814 has four (two coaxial inputs and two optical inputs). Connect your
digital components to the rear panel as shown below.
• VSX-D714/D814 only – There is one digital output jack which is marked DIGITAL OUT. If you
connect this to the optical input on a digital recorder (currently these include MD, DAT and
CD-R) you can make direct digital recordings with this unit.
When connecting your equipment, always make sure the power is turned off and the power cord
is disconnected from the AC outlet.
• The arrows indicate the direction of the digital audio signal.
DIGITAL
OUT
DIGITAL
IN
VSX-D714/
D814 only
CD recorder
This receiver*
CEN-
TER
SUB WOOFER
VSX-D814 only
AUX
IN
CO
FM UNBAL
75
AM
LOOP
DIGITAL OUT
Ω
ANTENNA
CD
IN
OPT
MONITOR
O
R
L
MONITOR OUT
OUT
SURROUND
OPT
CONTROL
IN
DVD 5.1CH INPUT
OUT
IN
DVR/
VCR
2
DIGITAL
OUT
Y
PB
Satellite tuner
CD player
(DVR/VCR)
OUT
VIDEO
OPT
DVR/
VCR
FRONT
IN
IN
R
L
1
S
P
E
TV
/
OUT
SAT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
DIGITAL IN
COAX
2
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
SAT
IN
A
A
K
(CD)
D
V
D
5.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
/LD
1
IN
CD-R
TAPE
E
R
S
PREOUT
OUT
IN
(DVD
/LD)
/
IN
DIGITAL OUT
COAX
/
MD
S-VIDEO
PLAY
R
AUDIO
L
DIGITAL OUT
COAX
DVD player
* The illustration shows the VSX-D814, but connections for the VSX-D514/D714 are the same.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Connecting up
• If you have an LD player, you need to make special connections to ensure you can play 2
RF format LDs on your system. If this is the case, hook up your DVD or LD player directly to
an RF demodulator using both the 2RF output and either a coaxial or optical digital
connection. We also recommend hooking up your digital components to analog audio jacks
as well. Make sure the RF demodulator digital in switch is set correctly (optical or coaxial
depending on the connection). See the component's instruction manual if you are unsure
about its input and output jacks.
Connecting audio components
To begin set up, connect your analog audio components (such as a cassette deck) to the jacks.
For components you want to record with, you need to hook up four plugs to the receiver (a set
of stereo inputs and a set of stereo outputs), but for components that only play, you only need
to hook up one set of stereo plugs. You must also hook up your digital components to analog
audio jacks if you want to record to/from digital components (like an MD) to/from analog
components. See page 15 for more on digital connections.
When connecting your equipment, always make sure the power is turned off and the power cord
is disconnected from the AC outlet.
• The arrows indicate the direction of the audio signal.
This receiver*
OUTPUT
CEN-
SUB WOOFER
TER
CD player
L
AUX
IN
ASSIGNABLE
COMPONENT VIDEO
(
)
D
V
D
/
LD IN
¥
FM UNBAL
75
AM
LOOP
R
DIGITAL OUT
Ω
ANTENNA
CD
IN
OPT
MONITOR OUT
R
L
MONITOR OUT
OUT
SURROUND
OPT
CONTROL
IN
DVD 5.1CH INPUT
OUT
IN
DVR/
VCR
2
Y
P
B
P
R
Y
P
B
PR
(
)
T
V
/
SAT IN
ø
(DVR/VCR)
OUT
VIDEO
OPT
DVR/
VCR
FRONT
CENTER
SURROUND BACK
IN
IN
R
L
R
L
1
S
P
E
TV
/
OUT
SAT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
DIGITAL IN
REC PLAY
2
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
SAT
IN
CD-R/Tape/MD deck
A
A
K
S I N G L E
SEE INSTRUCTION
MANUAL
(CD)
D
V
D
5.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
/LD
1
IN
CD-R
TAPE
E
R
S
PREOUT
OUT
IN
(DVD
/LD)
/
IN
/
MD
S-VIDEO
PLAY
R
AUDIO
L
* The illustration shows the VSX-D814, but connections for the VSX-D514/D714 are the same.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
03
Connecting DVD 5.1 channel components
If you prefer to use a separate component for decoding DVDs, you can connect a decoder or a
DVD player with multichannel analog outputs to the multichannel inputs of this receiver.
When connecting your equipment, always make sure the power is turned off and the power cord
is disconnected from the AC outlet.
• The arrows indicate the direction of the signal.
CEN-
SUB WOOFER
TER
AUX
IN
CO
FM UNBAL
75
AM
LOOP
DIGITAL OUT
Ω
ANTENNA
CD
OPIN
MONITOR O
R
L
MONITOR OUT
OUT
SURROUND
OP
CONTROL
IN
DVD 5.1CH INPUT
OUT
DVR/
VCR
2
Y
P
(DVR/VCR
OUT
IN
IN
IN
VIDEO
OP
DVR/
VCR
FRONT
T
SURROUND
IN
IN
R
L
SUB
1
S
E
/
OUT
OUTPUT
FRON
OUTPUT
CENTER
OUTPUT
WOOFER
OUTPUT
VIDEO
SAT
(TV
IN
SA
OUTPUT
ASSIGNABLE
DIGITAL IN
COA
2
DVD
/LD
FRONT
L
L
MONITOR
OUT
T
V
/
SAT
IN
A
A
K
(C
D
V
D
I
5.1CH
I
SUB
WOOFER
COAX
DVD
/LD
R
R
1
IN
CD-R
TAPE
E
R
S
PREOUT
OUT
IN
(DVD
/LD)
/
IN
/
MD
S-VIDEO
PLAY
R
AUDIO
L
DVD/multi-channel decoder
with multi-channel analog
output jacks
This receiver*
* The illustration shows the VSX-D814, but connections for the VSX-D514/D714 are the same.
• The multichannel input can only be used when DVD 5.1 ch is selected (see page 42).
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Connecting up
Connecting video components
Connect your video components to the jacks as shown below. With digital video components
(like a DVD player), you must use the connections shown on this page for the video signal, but
in order to hear a digital source (like a DVD) you should hook up the audio to a digital input (see
page 15). It is also a good idea to hook up your digital components with analog audio
connections (see page 16).
For better quality video, you can hook up using the component video jacks or the S-video jacks
(quality descends in this order) on the rear of the receiver instead of the regular video jacks.
Make sure they are connected to the video component using the same kind of connection.
When connecting your equipment, always make sure the power is turned off and the power cord
is disconnected from the AC outlet.
• The arrows indicate the direction of the signal
Video deck
INPUT
VIDEO
L
OUTPUT
VIDEO
This receiver*
OUTPUT
VIDEO
L
AUX
IN
R
R
TV tuner
FM UNBAL
75
AM
LOOP
DIGITAL OUT
Ω
L
ANTENNA
(or Satellite tuner)
CD
IN
OPT
R
MONITOR OUT
OUT
R
OPT
CONTROL
IN
DV
OUT
IN
DVR/
VCR
2
(DVR/VCR)
OUT
VIDEO
OPT
DVR
VCR
IN
IN
1
TV
/
OUT
SAT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
DIGITAL IN
COAX
2
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
SAT
IN
(CD)
D
V
D
INPUT
VIDEO
5.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
/LD
1
IN
OUTPUT
CD-R
PREOUT
OUT
IN
(DVD
/LD)
T
I
/
MD
S-VIDEO
VIDEO
PLAY
DVD or LD player
R
AUDIO
L
L
R
TV (monitor)
* The illustration shows the VSX-D814, but connections for the VSX-D514/D714 are the same.
Connecting to the front panel video
terminal
VSX-D714/D814 only
MULTI JOG
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TONE
QUICK SETUP
SPEAKERS
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
Front video connections are accessed via the
front panel using the VIDEO button. There are
standard audio/video jacks as well as an
S-video jack (the VSX-D814 also has an optical
input). Hook them up the same way you made
the rear panel connections.
Video
camera
(etc.)
V
L
R
DIGITAL OUT
VIDEO OUTPUT
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
03
Antenna snap connectors
Twist the exposed wire strands together and
insert into the hole, then snap the connector
shut.
Connecting antennas
Connect the AM loop antenna and the FM
wire antenna as shown below. To improve
reception and sound quality, connect external
antennas (see Using external antennas
below). Always make sure that the receiver is
switched off and unplugged from the wall
outlet before making or changing any
connections.
10mm
Using external antennas
AM loop
antenna
To improve FM reception
Connect an external FM antenna.
FM wire
antenna
AUX
IN
FM UNBAL
75
AM
LOOP
DIGITAL OUT
Ω
ANTENNA
CD
OPT IN
MONITOR OUT
OUT
OPT
CONTROL
IN
OUT
DVR/
VCR
2
(DVR/VCR)
OUT
IN
IN
IN
VIDEO
OPT
DVR/
VCR
T
IN
IN
1
75Ω coaxial cable
TV
/
OUT
SAT
(TV
/
IN
SAT)
ASSIGNABLE
DIGITAL IN
COAX
2
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
SAT
IN
(CD)
D
V
D
5.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
/LD
1
IN
CD-R
TAPE
PREOUT
OUT
IN
(DVD
/LD)
/
IN
/
MD
S-VIDEO
J-shape plug
PLAY
R
AUDIO
L
FM UNBAL
Ω
75
FM wire antenna
To improve AM reception
Connect the FM wire antenna and fully extend
vertically along a window frame or another
suitable place that gives good reception.
Connect a 5–6 metre length of vinyl-coated
wire to the AM antenna terminal without
disconnecting the supplied AM loop antenna.
For the best possible reception, suspend
horizontally outdoors.
AM loop antenna
Assemble the antenna and connect to the
receiver. Attach (if necessary) and face in the
direction that gives the best reception.
Outdoor
antenna
5–6m
Indoor antenna
(vinyl-coated wire)
FM UNBAL
75
AM
LOOP
Ω
ANTENNA
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Connecting up
Connecting the speakers (VSX-D514/D714)
A complete setup of six speakers (including the subwoofer) is shown below, but everyone’s
home setup will vary. Simply connect the speakers you have in the manner shown below. The
receiver will work with just two stereo speakers (the front speakers in the diagram) but using at
least three speakers is recommended, and a complete setup is best. If you’re not using a
subwoofer, change the front speaker setting (see Speaker setting on page 46) to large.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left
to the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver
match those on the speakers. You can use speakers with a nominal impedance between 6–16Ω
(please see Switching the speaker impedance on page 72 if you plan to use speakers with an
impedance of less than 8Ω).
Be sure to complete all connections before connecting this unit to the AC power source.
Front speakers
Center speaker
C
Surround speakers
L
R
LS
RS
CEN-
SUB WOOFER
TER
AUX
CD
IN
COPONENT VIDEO
ASSIGNLE
(
FM UNBAL
75
D
V
D
/
LD N
¥
AM
LOOP
DIGITAL OU
Ω
ANTENNA
OPT IN
R
L
MONITOR O
MONITOR OUT
OUT
SURROUN
CONTROL
IN
DVD 5.1CH INUT
OUT
DVR/
VCR
Y
P
B
P
R
Y
P
B
PR
(
)
T
V
/
S
A
T
IN
ø
OUT
DIGITAL IN
IN
IN
IN
VIDEO
OPT
DVR/
VCR
FRON
CENTER
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
1
S
P
E
TV
/
OUT
SAT
(T
V
/
IN
SAT
)
ASSIGNABLE
COAX
2
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
SAT
IN
A
A
K
(CD)
D
V
D
B
5.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
/LD
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(DVD
/
IN
/
L
D)
SURROUND
BACK
/
MD
S-VIDEO
PLAY
R
AUDIO
L
VSX-D714
Powered subwoofer
SW
INPUT
* The illustration shows the VSX-D714, but connections for the VSX-D514 are the same.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
03
Connecting the speakers (VSX-D814)
A complete setup of eight speakers (including the subwoofer) is shown below, but everyone’s
home setup will vary. Simply connect the speakers you have in the manner shown below. The
receiver will work with just two stereo speakers (the front speakers in the diagram) but using at
least three speakers is recommended, and a complete setup is best for surround sound. If
you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 46)
to large.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left
to the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver
match those on the speakers. You can use speakers with a nominal impedance between 6–16Ω
(please see Switching the speaker impedance on page 72 if you plan to use speakers with an
impedance of less than 8Ω).
Be sure to complete all connections before connecting this unit to the AC power source.
Front speakers
Center speaker
C
Surround speakers
Surround back speakers
L
R
LS
RS
SBL
SBR
CEN-
SB WOOFER
TER
AUX
CD
IN
COMPONENT VIDEO
ASSIGNABLE
SURROUD
BAK
L
L
(
D
V
D
/
LD) IN
¥
FM UNBAL
AM
LOOP
DIGITAL OUT
75
Ω
ANTENNA
MONITOR OUT
OPT IN
MONITOR OUT
R
L
OUT
SURROND
OPT
CONTROL
IN
DVD 5.1CH NPUT
OUT
DVR/
VCR
2
CENTR
PREO
P
B
P
R
Y
P
B
P
R
R
R
(T
V
/
S
A
T
)
IN
ø
FROT
SURROUND
(DVR/VCR)
OUT
IN
IN
IN
VIDEO
OPT
DVR/
VCR
FROT
CENTER
SURROUND BACK
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
R
L
1
S
P
E
TV
/
OUT
SAT
(
T
V
/
T
IN
SA
)
ASSIGNABLE
DIGITAL IN
COAX
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
2
SAT
IN
A
A
K
S
I
N
L
E
(
C
D
)
D
V
D
SEE INSTCTION
B
5.1CH
REC INPUT
MANL
SUB
COAX
DVD
/LD
1
IN
CD-R
TAPE
E
R
S
PREOUT
OUT
IN
(
D
V
D
)
/
IN
/
L
D
/
MD
SVIDEO
PLAY
R
AUDIO
L
VSX-D814
Passive
subwoofer
or single
surround
back
Powered subwoofer
SW
TV
AUDIO IN
INPUT
speaker
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Connecting up
A and B speaker systems
VSX-D714/D814 only
• When using the speaker on your TV as the
center speaker (C), connect the CENTER
PREOUT jack on this unit to the audio
input jack on your TV. In this case the
center speaker shown is unnecessary.
The receiver has two speaker systems: A and
B. A is the main system supporting the full
speaker setup. If you switch on both A and B
speaker systems, only the front speakers and
the (active) subwoofer will be audible. No
sound will come from the center, surround, or
surround back speakers, but multichannel
sources will be down-mixed to the active
speakers so no sound will be lost. Similarly, if
you choose just the B system you‘ll only hear
the front speakers connected to the B system
and multi channel sources will be down-
mixed to these two speakers.
• If you are using only one surround back
speaker, connect the positive wire to the
right channel (+) terminal, and the
negative wire to the left channel (–)
terminal (see illustration on page 11).
• If you select subwoofer (SB SW) in the
Surround back speaker setting on page 46
you can hook up a subwoofer instead of
speakers to the surround back speaker
terminals. Connect the positive wire to the
right channel (+) terminal, and the
•
Press the SPEAKERS button on the
front panel to switch between speaker
systems (A, B or both).
negative wire to the left channel (–)
terminal (see illustration on page 11).
Hints on speaker placement
Speakers are usually designed with a
particular placement in mind. Some are
designed to be floorstanding, while others
should be placed on stands to sound their
best. Some should be placed near a wall;
others should be placed away from walls. We
have provided a few tips on getting the best
sound from your speakers (following), but you
should also follow the guidelines on
Speaker terminals
1
2
3
10mm
placement that the speaker manufacturer
provided with your particular speakers to get
the most out of them.
1
2
Twist exposed wire strands together.
Loosen speaker terminal and insert
exposed wire.
• Place the front left and right speakers at
equal distances from the TV.
Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker
wire is touching the back panel when you
switch the unit on, the power may cut off as a
safety measure. Use good quality speaker
wire to connect the speakers to the receiver.
• When placing speakers near the TV, we
recommend using magnetically shielded
speakers to prevent possible interference,
such as discoloration of the picture when
the TV is switched on. If you do not have
magnetically shielded speakers and
notice discoloration of the TV picture,
move the speakers farther away from the
TV.
3
Tighten terminal.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
03
• Place the center speaker above or below
the TV so that the sound of the center
channel is localized at the TV screen.
Overhead view of speaker setup
Front
Left
Front
Right
Center
• If possible, place the surround speakers
slightly above ear level.
• Try not to place the surround speakers
further away from the listening position
than the front and center speakers. Doing
so can weaken the surround sound effect.
Subwoofer
Surround
Left
Surround
Right
• To achieve the best possible surround
sound, install your speakers as shown
below. Be sure all speakers are installed
securely to prevent accidents and
improve sound quality.
Listening Position
Surround Back Left
Surround Back Right
Single Surround Back Speaker
• If you choose to install the center speaker
on top of the TV, be sure to secure it with
putty, or by other suitable means, to
reduce the risk of damage or injury
resulting from the speaker falling from the
TV in the event of external shocks such as
earthquakes.
3-D view of 6.1 channel speaker setup
• Make sure no exposed speaker wire is
touching the rear panel, this may cause
the receiver to turn off automatically.
Speaker placement diagrams
The following illustrations show 6.1 and 7.1
channel speaker setups.
3-D view of 7.1 channel speaker setup
• VSX-D514 only – Follow the speaker
placement diagrams below, disregarding
the surround back speakers.
• VSX-D714 only – See Connecting additional
amplifiers on page 24 for more on
connecting a surround back speaker.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Connecting up
Connecting additional amplifiers
VSX-D714/D814 only
This receiver has more than sufficient power for any home use, however it is possible to add
additional amplifiers to every channel on the VSX-D814 or the surround back channel of the VSX-
D714. Make the connections shown below to add amplifiers to power your speakers. Always
make sure that the receiver is switched off and unplugged from the wall outlet before making
or changing any connections.
• The arrows indicate the direction of the audio signal.
VSX-D714
CEN-
SUB WOOFER
TER
AUX
IN
CO
Powered
FM UNBAL
75
AM
LOOP
DIGITAL OUT
Ω
ANTENNA
CD
IN
OPT
R
L
MONITOR O
MONITOR OUT
subwoofer
OUT
SURROUND
INPUT
CONTROL
IN
DVD 5.1CH INPUT
OUT
IN
DVR/
VCR
Y
P
B
OUT
DIGITAL IN
VIDEO
OPT
DVR/
VCR
FRONT
IN
IN
R
L
1
S
P
E
TV
/
OUT
SAT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
COAX
2
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
SAT
IN
A
A
K
(CD)
D
V
D
5.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
/LD
1
IN
CD-R
TAPE
E
R
S
Surround back
channel amplifier
or powered speaker
OUT
IN
PREOUT
(DVD
/LD)
/
IN
SURROUND
BACK
/
MD
S-VIDEO
ANALOG IN
PLAY
R
AUDIO
L
ANALOG IN
Front channel
amplifier
L
R
VSX-D814
ANALOG IN
Surround channel
amplifier
AUX
CD
IN
SURROUND
BACK
L
L
¥
I
FM UNBAL
AM
LOOP
DIGITAL OUT
75
Ω
L
R
AN
IN
OPT
MO
OUT
OPT
CONTROL
IN
OUT
IN
DVR/
VCR
2
CENTER
PREOUT
P
R
R
R
ANALOG IN
FRONT
SURROUND
(DVR/VCR)
Surround back
VIDEO
OPT
ACK
SU
R
ROUND
FRONT
IN
IN
L
R
L
R
1
TV
/
OUT
SAT
(TV
/
IN
IN
channel amplifier
SAT)
ASSIGNABLE
DIGITAL IN
COAX
2
DVD
/LD
FRONT
MONITOR
OUT
L
E
(CD)
D
V
D
B
CTION
5.1CH
REC INPUT
SUB
WOOFER
COAX
1
IN
CD-R
TAPE
PREOUT
OUT
IN
(DVD
/LD)
/
ANALOG IN
/
MD
S-VID
Center channel
amplifier
PLAY
R
AUDIO
L
INPUT
Powered
subwoofer
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
03
Operating other Pioneer
components
• To hear sound only from the pre-outs,
disconnect any speakers that are
connected directly to the receiver.
VSX-D714/D814 only
By connecting a control cord (optional), you
can point the remote controls of other Pioneer
components at the receiver’s remote sensor.
The remote control signals are received by the
remote sensor of this unit, and sent to the
other devices via the CONTROL OUT terminal
of the receiver.
• If you’re not using a subwoofer, change
the front speaker setting (see Speaker
setting on page 46) to large.
• VSX-D714 only – If you connect to a
surround back speaker, make sure the
Surround back speaker setting on page 46
is switched on and set to the proper
speaker size.
CONTROL
OUT
IN
CONTROL
IN
OUT
Receiver
• These speaker terminals are hazardous
when live. To prevent the risk of electric
shock when connecting or disconnecting
the speaker cables, disconnect the power
cord.
Other Pioneer products
with CONTROL terminals
Remote
control
unit
Connect to CONTROL
terminal of other
compatible Pioneer products
Power cord caution
Handle the power cord by the plug. Do not
pull out the plug by tugging the cord and
never touch the power cord when your hands
are wet as this could cause a short circuit or
an electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or
pinch the cord. Never make a knot in the cord
or tie it with other cords. The power cords
should be routed such that they are not likely
to be stepped on. A damaged power cord can
cause a fire or give you an electrical shock.
Check the power cord once in a while. When
you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Connecting up
•
Use a 3-ringed miniplug SR+ cable to
Using this receiver with a
connect the CONTROL IN jack of this
receiver with the CONTROL OUT of your
plasma display.
Pioneer plasma display
VSX-D714/D814 only
Before you can use the extra SR+ features,
you need to make a few settings in the
receiver. See Using the SR+ mode with a
Pioneer plasma display on page 54 for detailed
instructions.
If you have a Pioneer plasma display (models
PDP-504HDG and PDP-434HDG), you can use
an SR+ cable (see note below) to connect it to
this unit and take advantage of various
convenient features, such as automatic video
input switching of the plasma display when
the input is changed.
VIDEO
INPUT 3
VIDEO
INPUT 1
Pioneer plasma
display
Pioneer plasma
CONTROL
display
OUT
Media receiver
DVD player
Satellite receiver, etc
CEN-
SUB WOOFER
TER
DVD
AUDIO IN
TV/SAT
AUX
CD
IN
IN
FM UNBAL
75
AM
AUDIO IN
DIGITAL OUT
Ω
LOOP
ANTENNA
OPT
R
L
MONITOR OUT
OUT
MULTI JOG
SURROUND
DVD/LD
TV/SAT
DVR/VCR
VIDEO
CD-R/
APE/MD
ENTER
OPT
2
CONTROL
IN
DVD 5.1CH INPUT
CD
T
TUNER
AUX
OUT
IN
DVR/
VCR
MASTER VOLUME
MULTI JOG
TONE
QUICK SETUP
AD
V
R
ANCED
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
ST
A
TION
TUNING
STANDARD
SPEAKERS
S
U
R
O
U
ND
DOWN
UP
(DVR/VCR)
OPT
1
OUT
STANDBY/ON
PHONES
VIDEO
LISTENING MODE
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
DVR/
VCR
PTY
SEARCH
EON
MODE
TUNER EDIT
MULTI JOG
CLASS
BAND
MPX
IN
IN
R
S
P
E
A
A
K
E
R
S
TV
/
OUT
SAT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
DIGITAL IN
COAX
2
(CD)
DVD
/LD
FRONT
MONITOR
OUT
T
V
/
SAT
IN
D
V
D
VSX-D714/814
5.1CH
REC INPUT
SUB
COAX
WOOFER
DVD
/LD
1
IN
CD-R
TAPE
PREOUT
OUT
IN
(DVD
/
IN
/LD)
/
MD
S-VIDEO
PLAY
To make the most of the SR+ features, you
should connect your source components
(DVD player, etc.) in a slightly different way to
that described in this chapter. For each
component, connect the video output directly
to the plasma display, and just connect the
audio (analog and/or digital) to this receiver.
R
AUDIO
L
* The illustration shows the VSX-D814, but
connections for the VSX-D714 are the same.
• If you connect to a Pioneer plasma display
using an SR+ cable, you will need to point
the remote control at the plasma display
remote sensor to control the receiver. In
this case, you won’t be able to control the
receiver using the remote control if you
switch the plasma display off.
• The 3-ringed miniplug SR+ cable from
Pioneer is commercially available under the
part number ADE7095. Contact the Pioneer
Customer Support division for more infor-
mation on obtaining an SR+ cable.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
04
CChaoptnert4r: ols and displays
Front panel (VSX-D514)
1
2
3
4
5
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-D514
MULTI JOG
DVD/LD
CD
DVD 5.1
TV/SAT
FM
DVR/VCR
AM
CD-R/
TAPE/MD
ENTER
MASTER VOLUME
DOWN
UP
STANDBY/ON
PHONES
7
6
8
9
10
11 12 13 14 15 16
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SPEAKER
IMPEDANCE
VSB
MODE
TUNING
STATION
TONE
QUICK SETUP
STANDARD
LISTENING MODE
MUTE
MULTI JOG
TUNER EDIT
CLASS
MPX
INPUT ATT
FL DIMMER
MULTI JOG
22 21 20 19 18 17
ꢀ STANDBY/ON
Switches the receiver between on and
standby.
1
5
MULTI JOG dial
The MULTI JOG dial performs a number of
tasks. Use it to select options after pressing
TONE, QUICK SETUP or TUNER EDIT.
2
Input select buttons
Press to select an input source.
6
MASTER VOLUME
3
Remote sensor
7
PHONES jack
Receives the signals from the remote control.
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers.
4
ENTER
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Controls and displays
8
STATION +/– buttons
16 QUICK SETUP
See Using the Quick Setup on page 12.
Selects station presets when using the tuner
(page 58).
17 MUTE
9
TUNING +/– buttons
Mutes the sound (or restores the sound if it
has been muted).
Selects the frequency when using the tuner
(page 56).
18 FL DIMMER
10 LISTENING MODE buttons
Dims or brightens the display.
STANDARD
19 INPUT ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
Press for Standard decoding and to
switch between the various Pro Logic II
and (VSX-D714/D814 only) Neo:6 options
(page 36).
20 MPX
Press to receive a radio broadcast in mono
ADVANCED SURROUND
(page 56).
Use to switch between the various
surround modes (page 37).
21 CLASS
Switches between the three banks (classes)
STEREO/DIRECT
of station presets (page 57).
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls and channel levels for the
most accurate reproduction of a source
(page 38).
22 TUNER EDIT
Press to memorize and name a station for
recall (page 57).
11 SIGNAL SELECT
Use to select an input signal (page 38).
12 MIDNIGHT/LOUDNESS
Use Midnight when listening to movie
soundtracks at low volume. Use Loudness to
boost the bass and treble at low volume
(page 41).
13 SPEAKER IMPEDANCE
Use to change the impedance setting
(page 72)
14 VSB MODE
Selects the Virtual Surround Back (VSB)
mode (page 40).
15 TONE
Press this button to access the bass and
treble controls, which you can then adjust
with the MULTI JOG dial (page 41).
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
04
Front panel (VSX-D714/D814)
1
2
3
4
5
6
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-D814
MULTI JOG
DVD/LD
CD
TV/SAT
DVR/VCR
TUNER
VIDEO
AUX
CD-R/
TAPE/MD
ENTER
MASTER VOLUME
DOWN
UP
STANDBY/ON
PHONES
8
7
9
10
11
12 13 14 15 16 17
MULTI JOG
TONE
QUICK SETUP
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TUNING
STATION
STANDARD
SPEAKERS
LISTENING MODE
FL DIMMER
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
TUNER EDIT
CLASS
BAND
MPX
INPUT ATT
MULTI JOG
25 24 23 22 21 20
ꢀ STANDBY/ON
Switches the receiver between on and
standby.
19
18
1
7
MASTER VOLUME
PHONES jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers.
8
2
Input select buttons
Press to select an input source.
3
Remote sensor
9
STATION +/– buttons
Receives the signals from the remote control.
Selects station presets when using the tuner
(page 58).
4
MCACC indicator
Lights after the MCACC setup is complete
(page 52).
10 TUNING +/– buttons
Selects the frequency when using the tuner
(page 56).
5
6
ENTER
MULTI JOG dial
The MULTI JOG dial performs a number of
tasks. Use it to select options after pressing
TONE, QUICK SETUP or TUNER EDIT.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Controls and displays
11 LISTENING MODE buttons
19 DIGITAL IN
VSX-D814 only
STANDARD
See Connecting to the front panel video
terminal on page 18.
Press for Standard decoding and to
switch between the various Pro Logic II
and (VSX-D714/D814 only) Neo:6 options
(page 36).
20 FL DIMMER
Dims or brightens the display.
ADVANCED SURROUND
Use to switch between the various
surround modes (page 37).
21 INPUT ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
STEREO/DIRECT
22 MPX
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls and channel levels for the
most accurate reproduction of a source
(page 38).
Press to receive a radio broadcast in mono
(page 56).
23 BAND
Switches between AM and FM radio bands
(page 56).
12 SIGNAL SELECT
Use to select an input signal (page 38).
24 CLASS
Switches between the three banks (classes)
of station presets (page 57).
13 MIDNIGHT/LOUDNESS
Use Midnight when listening to movie
soundtracks at low volume. Use Loudness to
boost the bass and treble at low volume
(page 41).
25 TUNER EDIT
Press to memorize and name a station for
recall (page 57).
14 SPEAKERS
Use to cycle through the speaker system:
A ꢀ B ꢀ A+B (page 22)
15 SB CH MODE
Selects the Surround back channel mode
(page 39) and the Virtual Surround Back
(VSB) mode (page 40).
16 TONE
Press this button to access the bass and
treble controls, which you can then adjust
with the MULTI JOG dial (page 41).
17 QUICK SETUP
See Using the Quick Setup on page 12.
18 VIDEO INPUT
See Connecting to the front panel video
terminal on page 18.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
04
Display
1
2
3
4
5
6
7
8
9
10
x
SP A B
11 12
13
14
15
16
1
SIGNAL SELECT indicators
3 2DIGITAL
Lights to indicate the type of input signal
assigned for the current component:
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital signal.
AUTO
Lights when AUTO signal select is on.
4 2PRO LOGIC II (x)
When the (STANDARD) Pro Logic II mode of
the receiver is on, this lights to indicate Pro
Logic II decoding.
SB
Depending on the source, this lights
when a signal with surround back
channel encoding is detected.
VSX-D714/D814 only – The x lights to indicate
Pro Logic IIx decoding (see Listening in
surround sound on page 36 for more on this).
DIGITAL
Lights when a digital audio signal is
detected.
5
VIR.SB
Lights during Virtual surround back
2DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
processing.
6
DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls
and channel levels for the most accurate
reproduction of a source.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
7
MIDNIGHT
Lights during Midnight listening.
8
SLEEP
2
Lights when the receiver is in sleep mode.
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a DTS
signal.
9
ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Controls and displays
10 Speaker indicator
VSX-D714/D814 only
Remote control
Illustration shows the VSX-D714/D814 remote
control
Shows the speaker system currently in use.
11 Character display
10
11
12 Neo:6
VSX-D714/D814 only
RECEIVER
SOURCE
INPUT SELECT
1
2
12
When the (STANDARD) NEO:6 mode of the
receiver is on, this lights to indicate NEO:6
processing.
MULTI CONTROL
DVD/LD
C D
TV / SAT
DVR/VCR
TV CONT
RECEIVER
CD-R/TAPE
TUNER
ADVANCED
STEREO/
DIRECT
MIDNIGHT/
LOUDNESS
STANDARD SURROUND
13 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
TEST
CH
SELECT
MUTE
LEVEL
TONE
3
4
FL
EFFECT
DIMMER
RECEIVER CONTROL
14 LOUDNESS
Lights when LOUDNESS has been selected.
MASTER
VOLUME
TOP MENU
MENU
SETUP
TUNE
5
5
15 TUNER indicators
SR+
INPUT ATT
T.EDIT
DTV MENU
ST
ST
STEREO
ENTER
TUNE
6
GUIDE
Lights when a stereo FM broadcast is
being received in auto stereo mode.
AUDIO
SUBTITLE
MCACC
SETUP
SLEEP
RETURN
BAND DTV ON/OFF
DTV INFO
MONO
Lights when the mono mode is set using
the MPX button.
DISPLAY
CLASS
MPX
D.ACCESS
7
DISC
TUNED
ENTER
13
14
1
4
7
2
5
8
3
6
+
10
Lights when a broadcast is being
received.
8
9
9
0
16 Master volume level
TV CONTROL
Shows the overall volume level. ---dB
indicates the minimum level, and - 0 dB
indicates the maximum level.
CHANNEL
CHANNEL
VOLUME
Depending on your level settings for each
channel, the maximum volume can range
between –10 dB and –0 dB.
RECEIVER
1
RECEIVERꢀ
This switches between standby and on for this
receiver.
2
MULTI CONTROL buttons
Press to select control of other components
(see Controlling the rest of your system on
page 60).
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
04
RECEIVER
FL DIMMER
Dims or brightens the display.
Switches the remote to control the
receiver (used to select the features such
as SLEEP, MCACC SETUP, etc). Also use
this button to set up surround sound
(page 44, page 52).
4
5
MASTER VOLUME +/–
Use to set the listening volume.
Receiver and component control
buttons (Press the corresponding MULTI
CONTROL button first to access).
These controls function according to the
component you’ve selected.
3
RECEIVER CONTROL buttons
STANDARD
Press for Standard decoding and to
switch between the various Pro Logic II
and (VSX-D714/D814 only) Neo:6 options
(page 36).
TOP MENU
Displays the disc ‘top’ menu of a DVD.
SR+
ADVANCED SURROUND
Use to switch between the various
surround modes (page 37).
VSX-D714/D814 only
Switches the SR+ mode on/off (page 54).
DTV MENU
Displays menus on a digital TV.
STEREO/DIRECT
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls and channel levels for the
most accurate reproduction of a source
(page 38).
AUDIO
Changes the audio language or channel
with DVD discs.
MCACC SETUP
VSX-D714/D814 only
MIDNIGHT/LOUDNESS
Switches to Midnight or Loudness
listening (page 41).
Use to setup your speaker system using
the multichannel acoustic calibration
system (page 52).
CH SELECT
Selects a speaker when setting up the
surround sound of the receiver (page 53).
MENU
Displays the disc menu of DVD-Video
discs. It also displays TV menus.
LEVEL +/–
Adjusts the levels of the surround sound
of the receiver (page 53).
INPUT ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
TEST TONE
Sounds the test tone when setting up the
surround sound of the receiver (page 53).
T.EDIT
Use to memorize and name a station for
recall using the STATION +/– buttons
(page 57).
MUTE
Mutes the sound (or restores the sound if
it has been muted).
GUIDE
EFFECT +/–
Displays the guides on a digital TV.
Adds or subtracts the amount of effect
with different advanced surround modes
(page 37).
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Controls and displays
SUBTITLE
CLASS
Displays/changes the subtitles included
in multilingual DVD-Video discs.
Switches between the three banks
(classes) of radio station presets
(page 57).
SLEEP
Use to put the receiver in sleep mode and
select the amount of time before the
receiver turns off.
MPX
Switches between stereo and mono
reception of FM broadcasts. If the signal
is weak then switching to mono will
improve the sound quality (page 56).
6
7
ꢁꢂꢃꢄ (TUNE +/–, ST +/–) /ENTER
Use the arrow buttons when setting up
your surround sound system (see
D.ACCESS
page 44). Also used to control DVD
menus/options and for deck 1 of a double
cassette deck player. Use the TUNE +/–
buttons to find radio frequencies and use
ST +/– to find preset stations (page 58).
After pressing, you can access a radio
station directly using the number buttons
(page 56).
8
Number buttons
Use the number buttons to directly select a
radio frequency (page 56) or the tracks on a
CD, DVD, etc.
Component/Tuner control buttons
The main buttons (ꢁ, ꢂ, etc.) are used to
control a component after you have selected
it using the MULTI CONTROL buttons. The
tuner/DTV controls above these buttons can
be accessed after you have selected the
corresponding MULTI CONTROL button
(TUNER or TV/SAT (when connected to
DTV)).
9
CHANNEL +/–
Use to select channels when using a VCR,
DVR, etc.
10 INPUT SELECT
Use to select the input source.
11 LED
RETURN
This lights when a command is sent from the
remote control.
Returns to the last screen selected when
using a digital TV tuner.
12 SOURCEꢀ
Press to turn on/off other components
connected to the receiver.
BAND DTV ON/OFF
Switches between the tuner AM and FM
bands (page 56). Also switches a digital
TV on/off.
13 DISC (ENTER)
The button’s use depends on the component
selected. It can be used to enter commands
for TV or DTV, and can also be used to select
a disc in a multi-CD player.
DTV INFO
Use to bring up information screens on a
digital TV.
DISPLAY
14 TV CONTROL buttons
Use to switch the display between the
station preset name and the frequency for
the tuner.
These buttons are dedicated to control the TV
assigned to the TV CONT button. Thus if you
only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL
button. If you have two TVs, assign the main
TV to the TV CONT button.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
04
ꢀ
Use to turn on/off the power of the TV.
(TV CONTROL) INPUT SELECT
Use select the TV function.
CHANNEL +/–
Use to select channels.
VOLUME +/–
Use to adjust the volume on your TV.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Listening to your system
Chapter 5:
Listening to your system
VSX-D714/D814 only:
Listening in surround sound
• 2Pro Logic IIx MOVIE – Up to 6.1
channel sound, especially suited to movie
sources
Using this receiver, you can listen to any
source in surround sound. However, the
options available will depend on your speaker
setup and the type of source you’re listening
to.
• 2Pro Logic IIx MUSIC – Up to 6.1
channel sound, especially suited to music
sources
If you connected surround back speakers, see
also Using the Surround Back Channel (SB
CH) on page 39.
• 2PRO LOGIC – 5.1 channel surround
sound
• NEO:6 CINEMA – 6.1 channel sound,
especially suited to movie sources
• NEO:6 MUSIC – 6.1 channel sound, espe-
cially suited to music sources
STANDARD
• You can’t use the STANDARD mode with
96kHz PCM or (VSX-D714/D814 only) DTS
96kHz/24-bit stereo sources.
•
While listening to a source, press
STANDARD.
• VSX-D714/D814 only – During playback of
a Dolby Digital multichannel source with
the SB CH MODE switched ON, you will
only be able to select DOLBY EX or 2
Pro Logic IIx MUSIC. See Using the
Surround Back Channel (SB CH) on
page 39 for more on this.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display.
With two channel sources, press STANDARD
repeatedly to select from:
VSX-D514 only:
• 2Pro Logic II MOVIE– Up to 5.1 channel
sound, especially suited to movie sources
• 2Pro Logic II MUSIC – Up to 5.1 channel
sound, especially suited to music sources
• 2PRO LOGIC – 5.1 channel surround
sound
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to your system
05
Pro Logic for a stereo surround effect. You
can also use with Dolby Digital sources
for a wider stereo field than the Standard
modes.
Using the Advanced surround effects
The Advanced surround effects can be used
for a variety of additional surround sound
effects. Most Advanced Surround modes are
designed to be used with film soundtracks,
but some modes are also suited for music
sources. Try different settings with various
soundtracks to see which you like.
• 5-STEREO (VSX-D514) / 6-STEREO (VSX-
D714/D814) – This can be selected to give
multichannel sound to a stereo source,
using all of the speakers in your setup.
• PHONES SURROUND – When listening
through headphones, you can still get the
effect of overall surround.
ADVANCED
SURROUND
• Depending on the source and the sound
mode you have selected, you may not get
sound from the surround back speakers
in your setup. For more on this, refer to
Using the Surround Back Channel (SB CH)
on page 39.
•
Press ADVANCED SURROUND repeat-
edly to select a listening mode.
• ADV. MOVIE – Simulates the relaxed
environment of a movie theater, and is
suitable for watching movies.
• If you press ADVANCED SURROUND
when the headphones are connected, the
PHONES SURROUND mode will automat-
ically be selected.
• ADV. MUSIC – Simulates the acoustic
environment of a large concert hall and is
suitable for music or musical sources.
• You can’t use the Advanced Surround
listening modes with 96kHz PCM or (VSX-
D714/D814 only) DTS 96kHz/24 bit
sources.
• TV SURR. – This mode produces surround
sound for both mono and stereo TV
sources. It is useful for older movies
recorded with mono soundtracks.
• SPORTS – This is designed for sports
programs with alot of action, adding to
the excitement by bringing background
action to the forefront.
• The Advanced Surround effects can be
adjusted in the range of 10 to 90 by
• GAME – Useful when playing video
games. It works especially well with
sound moving from left to right in game
software with alot of movement.
pressing EFFECT +/– . The effect level can
be set for each Advanced Surround mode.
The Standard mode cannot be changed.
• EXPANDED – This mode is especially
designed to give sound depth to stereo
sources, and lets you hear two-channel
(stereo) signals as simulated multi-
channel surround sound. Use with Dolby
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Listening to your system
Listening in stereo
MULTI JOG
QUICK SETUP
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TONE
SPEAKERS
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo.
LISTENING MODE
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
INPUT ATT
FL DIMMER
* Illustration shows the VSX-D814 model
Press SIGNAL SELECT on the front
•
panel to select the input signal corre-
sponding to the source component.
Each press cycles through the options as
follows:
STEREO/
DIRECT
• AUTO – This automatically switches to
DIGITAL if a digital source is detected,
otherwise it remains on ANALOG.
• DVD 5.1ch (VSX-D714/D814 only) –
Selects the multichannel inputs (only
appears when DVD/LD is selected).
•
While listening to a source, press
STEREO/DIRECT for stereo playback.
Press repeatedly to switch between:
• ANALOG – Selects the analog inputs.
• STEREO – The audio is heard with your
surround settings and you can still use
the Midnight, Loudness, and Tone control
functions.
• DIGITAL – Selects the digital input.
When set to DIGITAL or AUTO, 2DIGITAL
lights when a Dolby Digital signal is input,
and DTS lights when a DTS signal is input.
• DIRECT – Bypass all effects and surround
settings so that the audio remains as
close to the source audio signal as
possible.
• This receiver can only play back Dolby
Digital, PCM (32kHz–96 kHz) and DTS
digital signal formats (however, only the
VSX-D714/D814 can decode DTS 96kHz/
24 bit signal formats). With other digital
signal formats, set to ANALOG.
• If you switch on Midnight listening, Loud-
ness, or the Tone controls when DIRECT is
selected, the receiver automatically
switches to STEREO.
• You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 15) and
set the signal input to DIGITAL.
Choosing the input signal
• Default setting: AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
• Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to your system
Using the Surround Back
05
•
Press SB CH MODE (front panel) to
select a surround back channel option.
Each press cycles through the options as
follows:
Channel (SB CH)
(VSX-D714/D814 only)
• Default setting: SB ON (VSX-D814), SB
OFF (VSX-D714)
• SB CH AUTO – Automatically switches to
6.1 decoding for 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)
You can use automatic 6.1 decoding for 6.1
encoded sources (for example, Dolby Digital
EX or DTS-ES), or you can choose to always
use 6.1 decoding with other sources (for
example, 5.1 encoded material). With 5.1
encoded sources, a surround back channel
will be generated, but the material may sound
better in the 5.1 format for which it was origi-
nally encoded, in which case you can simply
switch the surround back channel off. The
table below indicates when you will hear the
surround back channel.
• SB CH ON – 6.1 encoding is always used
(for example, on 5.1 encoded material)
• SB CH OFF – Surround back channel is
switched off
• You can’t use the surround back channel
with headphones, the STEREO / DIRECT
mode, or if the Surround back speaker
setting on page 46 is set to SB or (VSX-
D814 only) SB SW.
• You can’t hear the surround back channel
with DTS 96kHz/24 bit sources.
STANDARD
ADVANCED SURROUND
All modes
SB CH
Type of source
STANDARD
decoding
PRO LOGIC IIx
MOVIE/MUSIC
NEO:6 CINEMA/
NEO:6 MUSIC
MODE
DTS-ES/Dolby Digital
Matrix encoded
ON
multi-channel sources
with 6.1 surround
AUTO
ON
Dolby Digital/DTS
encoded multi-channel
sources
(Dolby Digital)
AUTO
ON
Dolby Digital/DTS
encoded stereo sources,
Stereo sources
AUTO
ON
Analog 2-channel
(stereo) source
AUTO
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Listening to your system
Each press cycles through the options as
follows:
Using the Virtual Surround
Back mode (VSB)
• VSB AUTO (VSX-D714/D814 only)
• VSB ON
Selecting this mode allows you to hear a
virtual back channel through your surround
speakers. For example, you can choose to
listen to sources with no surround back
channel information (for example, 5.1
encoded material) with emulated 6.1
• VSB OFF
encoding (VSB ON). Sometimes the material
may sound better in the 5.1 format for which
it was originally encoded. In this case you can
simply switch it off (VSB OFF) or (VSX-D714/
D814 only) have the receiver only apply this
effect to 6.1 encoded sources like Dolby
Digital EX or DTS-ES (VSB AUTO).
• You can’t use the Virtual Surround Back
mode with headphones, the STEREO /
DIRECT mode, or if the Speaker setting on
page 46 is set to S .
VSX-D714/D814 only
• You can only use the Virtual Surround
Back mode if the surround speakers are
on and the Surround back speaker setting
on page 46 is set to SB or (VSX-D814
only) SB SW.
The table indicates when you will hear the
virtual surround back channel.
•
Press SB CH MODE / VSB MODE (front
panel) to select a virtual surround back
channel option.
• You can’t adjust the surround back
channel level when you’re listening to the
virtual surround back channel.
STANDARD
ADVANCED SURROUND
All modes
Virtual
Surround
Type of source
STANDARD
decoding
PRO LOGIC IIx
MOVIE/MUSIC
NEO:6 CINEMA/
NEO:6 MUSIC
Back mode
DTS-ES/Dolby Digital
Matrix encoded
multi-channel sources
with 6.1 surround
ON
AUTO
ON
Dolby Digital/DTS
encoded multi-channel
sources
AUTO
ON
Dolby Digital/DTS
encoded stereo sources,
Stereo sources
AUTO
ON
Analog 2-channel
(stereo) source
AUTO
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to your system
05
Using Midnight and Loudness
listening
Using the tone controls
Depending on what you are listening to, you
may want to adjust the bass or treble using
the front panel tone control.
The Midnight listening feature allows you to
hear effective surround sound of movies at
low volume levels. The effect automatically
adjusts according to the volume at which
you’re listening.
MULTI JOG
ENTER
The Loudness listening feature can be used to
get good bass and treble from music sources
at low volume levels.
MASTER VOLUME
MULTI JOG
QUICK SETUP
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TONE
SPEAKERS
DOWN
UP
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
MIDNIGHT/
LOUDNESS
* Illustration shows the VSX-D814 model
Press TONE to select the frequency you
1
want to adjust.
Press to switch between BASS and TREBLE.
•
Press MIDNIGHT/LOUDNESS to switch
between MIDNIGHT, LOUDNESS, and OFF.
2
Use the MULTI JOG dial to change the
amount of bass or treble as necessary.
Wait about five seconds for your changes to
be input automatically.
• You can’t use MIDNIGHT/LOUDNESS
when DVD 5.1 ch has been selected, or
when listening to a DTS 96kHz/24 bit
source and 96 kHz PCM.
• You can only use the tone controls when
STEREO/DIRECT is selected. DIRECT will
switch to STEREO when the tone controls
are used.
• VSX-D714/D814 only – The tone controls
affect SPEAKER A only. They can’t be
used when SPEAKER A is switched off.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Listening to your system
Playing other sources
•
Press DVD 5.1 on the front panel to
select the multichannel inputs.
VSX-D714/D814 model:
MULTI JOG
RECEIVER
INPUT SELECT
MULTI CONTROL
DVD/LD
CD
TV/SAT
VCR/DVR
TV CONT
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TONE
QUICK SETUP
CD-R/TAPE
TUNER
STANDARD
SPEAKERS
LISTENING MODE
FL DIMMER
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
INPUT ATT
1
Turn on the power of the playback
component.
2
3
Turn on the power of the receiver.
Select the source you want to play-
* Illustration shows the VSX-D814 model
Press DVD/LD on the remote control or
1
back.
the front panel.
Use the MULTI CONTROL buttons (or INPUT
SELECT).
2
Press SIGNAL SELECT (front panel)
repeatedly to select DVD 5.1ch.
To cancel playback from the multichannel
inputs, use the SIGNAL SELECT button to
select a different input signal.
4
Start playback of the component you
selected in step 1.
Selecting the multichannel
analog inputs
If you have connected a decoder or a DVD
player with multichannel analog outputs to
this receiver (page 17), you must select the
analog multichannel inputs for surround
sound playback.
• When playback from the multichannel
inputs is selected, you can’t use the
INPUT ATT, TONE, and MIDNIGHT/
LOUDNESS buttons, as well as the STAN-
DARD, ADVANCED SURROUND, and
STEREO/DIRECT sound modes.
VSX-D514 model:
• When playback from the multichannel
inputs is selected, only the volume and
channel levels can be set.
DVD/LD
CD
DVD 5.1
TV/SAT
FM
DVR/VCR
AM
CD-R/
TAPE/MD
ADVANCED
STANDARD SURROUND
ST
D
STATION
TUNING
STANDBY/ON
LISTENING MODE
TUNER EDIT
CLASS
MPX
INPUT ATT
FL DIMMER
MUTE
PHONES
MULTI JOG
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to your system
Using the sleep timer
05
The sleep timer switches the receiver into
standby after a specified amount of time so
you can fall asleep without worrying about the
receiver being left on all night. Use the remote
control to set the sleep timer.
1
Press RECEIVER.
2
Press SLEEP repeatedly to set the sleep
time.
90 min
Off
60 min
30 min
• You can check the remaining sleep time
at any time by pressing SLEEP once.
Pressing repeatedly will cycle through the
sleep options again.
• You can also switch off the sleep timer
simply by switching off the receiver.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Setting up the receiver
CSheapttetri6n: g up the receiver
VSX-D514 only:
Choosing your receiver setup
To ensure the best possible surround sound,
be sure to complete the following set up
operations. This is particularly important
when using DTS and Dolby surround. You
only need to make these settings once (unless
you change the placement of your current
speaker system or add new speakers, etc.).
Refer to the following pages for details on
each of the settings.
Speaker setting (page 46)
Specify the number and type of speakers
you have connected.
Subwoofer setting (page 47)
Specify how the subwoofer is used.
Crossover frequency setting (page 47)
Determine which frequencies will be sent
to the subwoofer (or large speakers).
LFE attenuator setting (page 47)
Choose the attenuator level for the LFE
channel.
RECEIVER
Front speaker distance setting (page 48)
Specify the distance from your listening
position to your front left speaker.
RECEIVER
Center speaker distance setting (page 48)
Specify the distance from your listening
position to your center speaker.
Surround speaker distance setting
(page 48)
ENTER
Specifies the distance from your listening
position to your surround back speakers.
Subwoofer distance setting (page 49)
Specify the distance from your listening
position to your subwoofer.
1
on.
Press RECEIVERꢀ to turn the power
2
3
Press RECEIVER.
Dynamic range control setting (page 50)
Compress the dynamic range of the
sound track.
Use ꢁ or ꢂ to choose the option you
want to adjust.
It will be easiest to adjust each of the settings
in turn, following the order below (and on the
following pages). The current setting is shown
for each option as you cycle through the
display.
Dual mono setting (page 50)
Isolate one channel when listening to
discs with dual mono encoding.
Digital input settings (page 50)
Specify the components to be assigned to
the digital inputs (below).
The VSX-D514 and VSXD714/D814 settings
are separated below for easy reference.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the receiver
06
Surround left speaker distance setting
(page 49)
Specify the distance from your listening
position to your surround left speaker.
•
•
•
Coaxial digital input 1 setting
Coaxial digital input 2 setting
Optical digital input 1 setting
VSX-D714/D814:
Subwoofer distance setting (page 49)
Specify the distance from your listening
position to your subwoofer.
Speaker setting (page 46)
Specify the number and type of speakers
you have connected.
Dynamic range control setting (page 50)
Compress the dynamic range of the
sound track.
Surround back speaker setting (page 46)
Specify your surround back speaker/
surround back subwoofer setup.
Dual mono setting (page 50)
Isolate one channel when listening to
discs with dual mono encoding.
Subwoofer setting (page 47)
Specify how the subwoofer is used.
Crossover frequency setting (page 47)
Determine which frequencies will be sent
to the subwoofer (or large speakers).
Component video input settings
(page 50)
Specify the components to be assigned to
the component video inputs (below).
LFE attenuator setting (page 47)
Choose the attenuator level for the LFE
channel.
•
•
Component video 1 input setting
Component video 2 input setting
Front left speaker distance setting
(page 48)
Specify the distance from your listening
position to your front left speaker.
Digital input settings (page 50)
Specify the components to be assigned to
the digital inputs (below).
•
•
•
•
Coaxial digital input 1 setting
Coaxial digital input 2 setting
Optical digital input 1 setting
Optical digital input 2 setting (VSX-
Center speaker distance setting (page 48)
Specify the distance from your listening
position to your center speaker.
Front right speaker distance setting
(page 48)
D814 only)
Specify the distance from your listening
position to your front right speaker.
SR+ control settings (page 51)
Specify how you want to control your
Pioneer plasma display.
Surround right speaker distance setting
(page 49)
Specify the distance from your listening
position to your surround right speaker.
•
•
•
•
•
•
Control mode setting
Volume control setting
Function setting for DVD input
Function setting for TV input
Function setting for DVR input
Function setting for VIDEO input
Surround back speaker distance setting
(page 49)
Specifies the distance from your listening
position to your surround back speakers.
4
Use ꢀ or ꢁ to adjust the setting.
The setting is entered automatically.
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Setting up the receiver
5
Repeat steps 3 and 4 to adjust other
One of the following configurations should
match your setup:
setup options.
6
exit.
When you’re done, press ENTER to
FS-CS-SS
FS-CS-S
FS-C -SS
FS-C -S
FL-CL-SL
FL-CL-SS
FL-CL-S
FL-C -S
FL-C -SS
FL-C -SL
FL-CS-S
FL-CS-SS
• The setting display is automatically exited
after 3 minutes of inactivity.
Speaker setting
• VSX-D514 default setting: S (all speakers)
• VSX-D714/D814 default setting: FL-CS-SS
(If a subwoofer is detected when you turn
the receiver on, the default is FS-CS-SS.)
FL-CS-SL
You must let the receiver know how many
speakers you have, and how big they are. The
size you choose (large or small) determines
how much bass is sent from the receiver to
the speakers.
Surround back speaker setting
VSX-D714/D814 only
In the display, F, C, and S refer to front, center,
and surround speakers respectively. Speaker
size is denoted as L for large speakers, S for
small speakers, and (asterisk) if no speaker
is connected.
• Default setting: S (VSX-D814), (VSX-
D714)
You must let the receiver know if surround
back speaker(s) have been connected, and
how big they are. The size you choose (large or
small) determines how much bass is sent
from the receiver to the speakers. If you have
connected a subwoofer to the surround back
terminals (VSX-D814 only), you should select
the surround back subwoofer setting (SB SW)
• If the cone size (diameter) of the speaker
is larger than 15 cm, set the speaker size
to L.
• If you’re not using a subwoofer, we
recommend setting the front speakers to
from the options. Choose (asterisk) if no
speaker is connected.
L.
•
Use ꢄ or ꢃ to select SB S, SB , SB SW
•
Cycle through the available choices
using ꢄ or ꢃ and choose a configuration
that matches your speaker setup.
or SB L.
SB S
SB
SB L
* VSX-D814 only
SB SW*
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the receiver
06
We recommend setting this to 200Hz if your
S speakers are smaller bookshelf-type
speakers.
• To select SB L, you must have SL selected
in the Speaker setting.
•
Use ꢄ or ꢃ to specify the crossover
frequency for your small speakers (100 Hz,
150 Hz or 200 Hz).
• 100Hz – Sends bass frequencies below
Subwoofer setting
You can choose whether the subwoofer is
used or not. Use the plus (PLUS) setting for
extra bass.
100 Hz to the subwoofer (or L speakers).
• 150Hz – Sends bass frequencies below
150 Hz to the subwoofer (or L speakers).
•
Use ꢄ or ꢃ to select subwoofer YES,
• 200Hz – Sends bass frequencies below
200 Hz to the subwoofer (or L speakers).
PLUS or NO.
• YES – The LFE channel and bass frequen-
cies from the small (S) speakers are sent
to the subwoofer.
• PLUS – The LFE channel and bass
frequencies from all speakers are sent to
the subwoofer (L speakers will also output
bass).
• If all speakers (front, center, and
surround) are set to L, the crossover
frequency can’t be set because there are
no S speakers (
appears in the
• NO – No bass frequencies are sent to the
subwoofer.
display).
LFE attenuator setting
• Default setting: 0 dB
• If you chose the small front speaker
setting, SW YES is automatically set and
locked.
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator
as necessary to prevent the ultra-low bass
tones from distorting the sound from the
speakers.
Crossover frequency setting
• Default setting: 100 Hz
•
Use ꢄ or ꢃ to set the attenuation
level (0 dB, 10 dB or
dB(∞)).
Crossover frequency is the point where the
receiver divides the high and low sounds (the
frequencies) between the speakers. Since
most smaller speakers can’t handle deep
bass tones, you can send these sounds to the
subwoofer (or if you don’t have a subwoofer,
the large (L) speakers in your system) instead
of the speakers set to small (S) in your setup.
Choose the point at which you want the
frequency routed to the subwoofer (or L
speakers).
0 dB
10 dB
∞
(displays
)
• When
∞
is selected (
appears in the
display), LFE cannot be heard.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Setting up the receiver
•
Use ꢄ or ꢃ to set the distance of the
Front speaker distance setting
center speaker from the main listening
position (within the range of 0.1 m to 9.0
m).
VSX-D514 only
• Default setting: 3 m
Sets the distance from the front left speaker to
the listening position.
•
Use ꢄ or ꢃ to set the distance of the
front speakers from the main listening
position (within the range of 0.1 m to 9.0
m).
• When C is selected in the speaker
setting, the center speaker distance can’t
be set.
Front left speaker distance setting
VSX-D714/D814 only
Front right speaker distance setting
VSX-D714/D814 only
• Default setting: 3 m
• Default setting: 3 m
Sets the distance from the front left speaker to
the listening position.
Sets the distance from the front right speaker
to the listening position.
•
Use ꢄ or ꢃ to set the distance of the
•
Use ꢄ or ꢃ to set the distance of the
front left speaker from the main listening
position (within the range of 0.1 m to 9.0
m).
front right speaker from the main
listening position (within the range of 0.1
m to 9.0 m).
Center speaker distance setting
• Default setting: 3 m
Surround speaker distance setting
VSX-D514 only
The center speaker is normally placed directly
in the front of the listening room and closer to
the listening position than the front speakers.
This means that the sound from the center
speaker will be heard before the front
speakers. To prevent this, set the center
speaker distance setting to delay the sound
from the center speaker so that the sound
from the front and center speakers will be
heard at the same time.
• Default setting: 3 m
You should set the distance of the surround
speakers accurately to hear sounds coming
from all speakers at the same time.
•
Use ꢄ or ꢃ to set the distance of the
surround speaker from the main listening
position (within the range of 0.1 m to 9.0
m).
• When S is selected in the speaker
setting, the surround speaker distance
can’t be set.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the receiver
06
Surround right speaker distance
setting
VSX-D714/D814 only
Surround left speaker distance
setting
VSX-D714/D814 only
• Default setting: 3 m
• Default setting: 3 m
You should set the distance of the surround
speakers accurately to hear sounds coming
from all speakers at the same time.
You should set the distance of the surround
speakers accurately to hear sounds coming
from all speakers at the same time.
•
Use ꢄ or ꢃ to set the distance of the
•
Use ꢄ or ꢃ to set the distance of the
surround right speaker from the main
listening position (within the range of 0.1
m to 9.0 m).
surround left speaker from the main
listening position (within the range of 0.1
m to 9.0 m).
• When S is selected in the speaker
setting, the surround speaker distance
can’t be set.
• When S is selected in the speaker
setting, the surround speaker distance
can’t be set.
Surround back speaker distance
setting
VSX-D714/D814 only
Subwoofer distance setting
• Default setting: 3 m
Like your speakers, you should set the
distance of the subwoofer accurately to hear
sounds from all speakers at the same time.
• Default setting: 3 m
You should set the distance of the surround
back speakers accurately to hear sounds
coming from all speakers at the same time.
•
Use ꢄ or ꢃ to set the distance of the
subwoofer from the main listening posi-
tion (within the range of 0.1 m to 9.0 m).
•
Use ꢄ or ꢃ to set the distance of the
surround back speakers from the main
listening position (within the range of 0.1
m to 9.0 m).
• When SW NO is selected in the
subwoofer setting, the subwoofer
distance can’t be set.
• When SB SW (VSX-D814 only) or SB is
selected in the surround back speaker
setting, the surround back speaker
distance can’t be set.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Setting up the receiver
•
Use ꢄ or ꢃ to cycle through the
Dynamic range control setting
• Default setting: OFF
possible dual mono settings.
Dynamic range is the difference between the
loudest and softest sounds in any given
signal. With this setting, you can compress
the dynamic range, so that low level sounds
can be heard more easily (sounding relatively
louder) yet louder sounds won’t be too over-
bearing.
Lch1.Rch2
ch2
ch1
Component video input settings
VSX-D714/D814 only
•
Use ꢄ or ꢃ to set the dynamic range
control (OFF, MAX, or MID).
Here you tell the receiver what components
you have hooked up to the component video
jacks on the back of the receiver.
Component video 1:
• Default setting: DVD
• When listening at low volumes, set to
MAX for maximum dynamic range
compression.
1
Use ꢄ or ꢃ to assign the component
• Dynamic range control is effective only
when a Dolby Digital or DTS signal is
being played back.
video 1 input (DVD, TV, DVR or OFF).
Component video 2:
• Default setting: TV
Dual mono setting
2
Use ꢄ or ꢃ to assign the component
video 2 input (DVD, TV, DVR or OFF).
•
Default setting: ch1
The dual mono setting can only be used when
listening to Dolby Digital and DTS signals
with dual mono encoding. It is sometimes
used when it is necessary to have one
language on one channel and a different
language on the other. With this setting you
can choose which channel in the dual mono
setting you want to listen to.
Digital input settings
Here you tell the receiver what components
you have hooked up to the coaxial and optical
DIGITAL IN jacks on the back of the receiver.
After you assign a component to a digital jack,
whenever you select that component, (for
example, a DVD player) the receiver
automatically changes to the digital input
setting and DIGITAL shows in the display.
If Dolby Digital mode is switched on, you will
hear the channel you have selected (either
ch1 or ch2) through your center speaker. With
Dolby Digital mode off, or if you don’t have a
center speaker, you will hear the channel you
have selected through both front speakers. In
the Lch1.Rch2 setting, the left front speaker
will play channel 1 and the right front speaker
will play channel 2.
Coaxial digital 1:
• Default setting: DVD
•
Use ꢄ or ꢃ to assign the coaxial
digital 1 input (DVD, TV, CD, CDR, DVR or
OFF).
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the receiver
06
Coaxial digital 2:
Control mode setting
• Default setting: CD
This must be switched to SR+ ON to access
the settings below (default is SR+ OFF).
•
Use ꢄ or ꢃ to assign the coaxial
digital 2 input (DVD, TV, CD, CDR, DVR or
OFF).
• SR+ OFF – Switches SR+ off (the receiver
and plasma display work independently)
• SR+ ON – Switches SR+ on (the receiver
sends control signals to the plasma
display)
Optical digital 1:
• Default setting: TV
•
Use ꢄor ꢃto assign the optical digital
Volume control setting
• VOL C OFF – The receiver does not control
1 input (DVD, TV, CD, CDR, DVR or OFF).
the volume of the plasma display
Optical digital 2
(VSX-D814 only)
• VOL C ON – When the receiver is
switched to one of the inputs that use the
plasma display (DVD/LD, or another one
of functions listed below), the volume on
the plasma display is muted so only
sound from the receiver is heard.
• Default setting: DVR
•
Use ꢄor ꢃto assign the optical digital
2 input (DVD, TV, CD, CDR, DVR or OFF).
Function setting for DVD/LD input
• DVD:1 – DVD:5 or TV – Matches the
DVD/LD function of the receiver with a
numbered video input on the plasma
display. For example, DVD:3 matches the
DVD/LD input with video input 3 on the
plasma display.
• You can’t assign two inputs to the same
function. For example, assigning input 1
to the default setting of input 2
automatically switches input 2 to OFF.
SR+ control for Pioneer plasma
displays
Function setting for TV/SAT input
• TV:1 – TV:5 or TV – Matches the TV/SAT
function of the receiver with a numbered
video input on the plasma display. For
example, TV:1 matches the TV/SAT input
with video input 1 on the plasma display.
VSX-D714/D814 only
Make the following settings if you have
connected a Pioneer plasma display to this
receiver using an SR+ cable. Note that the
number of function settings available will
depend on the plasma display you’ve
connected.
Function setting for DVR/VCR input
• DVR:1 – DVR:5 or TV – Matches the DVR/
VCR function of the receiver with a
numbered video input on the plasma
display. For example, DVR:2 matches the
DVR/VCR input with video input 2 on the
plasma display.
See also Using this receiver with a Pioneer
plasma display on page 26 and Using the SR+
mode with a Pioneer plasma display on
page 54.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Setting up the receiver
Function setting for VIDEO input
• VIDEO:1 – VIDEO:5 or TV – Matches the
VIDEO function of the receiver with a
numbered video input on the plasma
display. For example, VIDEO:4 matches
the VIDEO input with video input 4 on the
plasma display.
• You must complete the Speaker setting on
page 46 before using the MCACC setup.
Manually calibrating your
RECEIVER
listening area (MCACC)
VSX-D714/D814 only
You can use the Multichannel Acoustic Cali-
bration (MCACC) system to fine tune your
speaker levels and channel delay. These are
calibrated according to the distance from
your left front speaker to the listening posi-
tion. You will hear a series of test tones that
will allow you to set the speaker levels and
channel delay to your liking. The advantage of
doing this is that you can achieve an overall
balance defined by the front speakers (the
main speakers for home theater).
ENTER
MCACC
SETUP
1
2
Press RECEIVER.
Press MCACC SETUP.
The MCACC system uses the left front
speaker as a reference point to calibrate the
speaker level and channel delay.
The front left speaker tone and the target
speaker (the one that you’re trying to adjust)
tone will sound in turns, so you can judge
which needs to be louder.
• These test tones can be loud, so take care
that there is no one in the room who will
be startled by the noise.
3
Use ꢄ and ꢃ to adjust each channel
level in turn, pressing ENTER to go to the
next channel when you’re done.
The test tone is output in the following order
(depending on the speaker setting):
R
C
LS
RS
SW
SB
4
Specify the distance from the front left
speaker to your listening position using ꢄ
and ꢃ then press ENTER.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the receiver
06
5
Use ꢄ and ꢃ to adjust the delay for
Setting separate channel
each channel in turn, pressing ENTER to go
to the next channel when you’re done.
Listen to the reference channel and use it to
measure the target channel. Stand facing the
two speakers with your arms outstretched
pointing at each speaker. Try to make the two
tones sound as if they are arriving simulta-
neously at a position slightly in front of you
and between your arm span.
levels for listening modes
• Default setting: 0 dB
You can set relative channel levels from the
listening position using the method below
(this is similar to the VSX-D714/D814 MCACC
setup). Using CH SELECT (see tip below), it is
also possible to set separate channel levels
for each of the listening modes.
ADVANCED
STANDARD SURROUND
TEST
TONE
CH
SELECT
LEVEL
The test tone for channel delay is output in the
same order as step 5:
MASTER
VOLUME
R
C
LS
RS
SW
SB
After you have completed all the channels in
your speaker setup, the volume level returns
to normal and COMPLETE, then RESUME
shows in the display.
1
Press STANDARD or ADVANCED
SURROUND.
2
Press TEST TONE to output the test
The MCACC indicator then lights to show that
MCACC setup is complete.
tone.
The test tone is output in the following order
(depending on the speaker setting):
L
C
R
• Using the MCACC system to set up your
speaker system will overwrite any
previous settings you had for the
STANDARD or ADVANCED SURROUND
modes.
RS
SW
LS
SB
• If you don’t hear a test tone from one of
your speakers, please refer to Speaker
setting on page 46 and (VSX-D714/D814
only) Surround back speaker setting on
page 46 to make sure you have correctly
specified your speaker setup.
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Setting up the receiver
3
Press MASTER VOLUME +/– to adjust
Using the SR+ mode with a
the volume to an appropriate level.
Pioneer plasma display
4
Use LEVEL +/– to adjust the speaker
VSX-D714/D814 only
levels in turn.
When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer plasma
display even easier. These features include:
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is 10 dB.
• On-screen displays when making receiver
settings, such as speaker setup, MCACC
setup, and so on.
5
When you’re done, press TEST TONE to
turn off the test tone.
The receiver returns to the Standard mode.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the
plasma display.
• The speaker volume can be adjusted
without outputting the test tone by
pressing CH SELECT and then using
LEVEL +/–. However, you can only adjust
the level of the speakers currently active
in the mode you’re listening to. You can
set separate levels for the STANDARD,
STEREO and DVD 5.1 ch modes, as well
as for each ADVANCED SURROUND
mode.
• Automatic volume muting on the plasma
display.
See also Using this receiver with a Pioneer
plasma display on page 26 for connecting up,
and SR+ control for Pioneer plasma displays
on page 51 for setting up the receiver.
1
Make sure that the plasma display and
this receiver are switched on and that
they are connected with the SR+ cable.
See Using this receiver with a Pioneer plasma
display on page 26 for more on connecting
these components.
• Test tone is only output in STANDARD or
ADVANCED SURROUND mode.
2
To switch SR+ mode on/off, press
RECEIVER, then the SR+ button.
The front panel display shows SR+ CHECK,
then the new setting is displayed (SR+ ON or
SR+ OFF).
• Since the subwoofer transmits an ultra-
low frequency its sound may seem quieter
than it actually is.
• Using test tones to set up your speaker
system will overwrite any previous
settings you had for the STANDARD or
ADVANCED SURROUND modes.
• The automatic volume muting feature is
enabled separately; see SR+ control for
Pioneer plasma displays on page 51. (You
can also use the System Setup menu to
switch the SR+ mode of the receiver.)
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the receiver
06
• If you disconnect the SR+ cable or switch
the plasma display off while SR+ is on,
the receiver will automatically revert to
SR+ OFF.
• SR+ ERR shows in the display if no SR+
connection is detected (for example, the
cable isn’t connected).
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Using the tuner
Chapter 7:
Using the tuner
Automatic tuning
Listening to the radio
To search for stations in the currently
selected band, press and hold TUNE +/–
for about a second. The receiver will start
searching for the next station, stopping
when it has found one. Repeat to search
for other stations.
The following steps show you how to tune in
to FM and AM radio broadcasts using the
automatic (search) and manual (step) tuning
functions. If you already know the frequency
of the station you want, see Tuning directly to
a station below. Once you are tuned to a
station you can memorize the frequency for
recall later—see Saving station presets on
page 57 for more on how to do this.
Manual tuning
To change the frequency one step at a
time, press TUNE +/–.
High speed tuning
Press and hold TUNE +/– for high speed
tuning. Release the button at the
frequency you want.
TUNER
Improving FM stereo sound
If the TUNED or STEREO indicators don't light
when tuning to an FM station because the
signal is weak, press the MPX button to
switch the receiver into mono reception
mode. This should improve the sound quality
and allow you to enjoy the broadcast.
MASTER
VOLUME
TUNE
TUNE
BAND DTV ON/OFF
Tuning directly to a station
Sometimes, you'll already know the frequency
of the station you want to listen to. In this
case, you can simply enter the frequency
directly using the number buttons on the
remote control.
MPX
1
Press the TUNER button to select the
tuner.
2
Use the BAND button to change the
1
Press the TUNER button to select the
band (FM or AM), if necessary.
Each press switches the band between FM
and AM.
tuner.
2
Use the BAND button to change the
band (FM or AM), if necessary.
Each press switches the band between FM
and AM.
3
Tune to a station.
There are three ways to do this:
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the tuner
07
3
4
Press D.ACCESS (Direct Access).
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
TUNING
STATION
Use the number buttons to enter the
LISTENING MODE
frequency of the radio station.
For example, to tune to 106.00 (FM), press 1,
0, 6, 0, 0.
DIGITAL I
TUNER EDIT
CLASS
BAND
MPX
INPUT ATT
FL DIMMER
MULTI JOG
STEREO TUNED
A
SP
* Illustration shows the VSX-D814 model
FM
106.00
If you make a mistake halfway through, press
D.ACCESS twice to cancel the frequency and
start over.
TUNER
Saving station presets
If you often listen to a particular radio station,
it's convenient to have the receiver store the
frequency for easy recall whenever you want
to listen to that station. This saves the effort of
manually tuning in each time. This unit can
memorize up to 30 stations, stored in three
banks, or classes, (A, B and C) of 10 stations
each. When saving an FM frequency, the
MPX setting (see page 56) is also stored. Use
the front panel controls to store station
presets.
MASTER
VOLUME
TUNE
INPUT ATT
T.EDIT
ST
ST
ENTER
TUNE
BAND DTV ON/OFF
MPX
CLASS
1
Tune to a station you want to
memorize.
See Listening to the radio on page 56 for more
MULTI JOG
on this.
ENTER
MASTER VOLUME
2
Press T.EDIT (TUNER EDIT).
MULTI JOG
QUICK SETUP
/
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TONE
SPEAKERS
DOWN
UP
The display shows ST. MEMORY, then a
VIDEO INPUT
blinking memory class.
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
STEREO TUNED
A
SP
A -
99.50
* Illustration shows the VSX-D814 model
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Using the tuner
3
Press CLASS to select one of the three
Listening to station presets
classes then press ST +/– (STATION +/–) to
select the station preset you want.
You can also use the MULTI JOG dial (front
panel) to select a station preset.
You will need to have some presets stored to
do this. See Saving station presets on page 57
if you haven’t done this already.
1
Press TUNER to select the tuner.
4
Press ENTER.
2
Press CLASS to select the class in which
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the station.
the station is stored.
Press repeatedly to cycle through classes A,
B and C.
3
Press ST +/– (STATION +/–) to select
Naming station presets
For easier identification, you can name your
station presets.
the station preset you want.
1
Choose the station preset you want to
name.
See Listening to station presets below for how
to do this.
• If the receiver is left disconnected from
the AC power outlet for an extended
period, the station memories will be lost
and will have to be reprogrammed.
2
Press T.EDIT (TUNER EDIT).
The display shows ST. NAME, then a blinking
cursor at the first character position.
3
Input the name you want.
Changing the frequency step
Names can be up to four characters long.
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how
to switch the setting:
• Use the MULTI JOG dial (front panel) or
the ST +/– buttons (remote) to select
characters.
• Press ENTER to confirm a character. If no
character is input, a space is input.
1
Switch the receiver into standby.
2
On the front panel, press ꢀ STANDBY/
• The name is stored when ENTER is
pressed after choosing the fourth
character.
ON while you press and hold the BAND
(VSX-D714/D814) / CLASS (VSX-D514)
button.
The channel tuning step alternates between
FM 100 kHz/AM 10kHz and FM 50 kHz/AM
9 kHz each time you do this.
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
• Once you have named a station preset,
you can press DISPLAY when listening to
a station to switch the display between
the name and the frequency.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Making recordings
08
Chapter 8:
Making recordings
1
Select the source you want to record.
Making an audio or a video
recording
Use the MULTI CONTROL buttons (or INPUT
SELECT).
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
2
Select the input signal (if necessary).
Press SIGNAL SELECT (front panel) to select
the input signal corresponding to the source
component (see page 38 for more on this).
Keep in mind you can’t make a digital
recording from an analog source or vice-
versa, so make sure the components you are
recording to/from are hooked up in the same
way (see Connecting up on page 14 for more
on connections).
3
Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4
Prepare the recorder.
Insert a blank tape, MD, video etc. into the
If you want to record a video source, you also
need to use the same type of connection for
the source as for the recorder. For example,
you can’t record a component hooked up to S-
video jacks with a recorder hooked up to the
component video outputs (see page 18 for
more on video connections).
recording device and set the recording levels.
Refer to the instructions that came with the
recorder if you are unsure how to do this.
Most video recorders set the audio recording
level automatically—check the component’s
instruction manual if you’re unsure.
5
Start recording, then start playback of
the source component.
DVD/LD
CD
TV/SAT
DVR/VCR
TUNER
VIDEO
AUX
INPUT SELECT
CD-R/
TAPE/MD
MULTI CONTROL
DVD/LD
CD
TV/SAT
DVR/VCR
TV CONT
CD-R/TAPE
TUNER
STATION
STANDBY/ON
• The receiver's volume, balance, tone
(bass, treble, loudness), and surround
effects have no effect on the recorded
signal.
TUNER EDIT
CLASS
BA
PHONES
MULTI JOG
MULTI JOG
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TONE
QUICK SETUP
SPEAKERS
LISTENING MODE
VIDEO INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
PUT ATT
FL DIMMER
* Illustrations show the VSX-D814 model
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Controlling the rest of your system
CChaoptnert9r: olling the rest of your
system
Setting the remote to control
other components
Selecting preset codes
directly
There are several ways to set your remote to
control the other components in your system.
The easiest way to do this is to assign the
component’s manufacturer preset code
(starting on page 66) to one of the MULTI
CONTROL buttons on the remote control.
MULTI CONTROL
DVD/LD
CD
TV/SAT
DVR/VCR
TV CONT
RECEIVER
CD-R/TAPE
TUNER
The buttons can be set to control the following
components:
MASTER
VOLUME
Button
Controllable Components
TUNE
DVD/LD:
TV/SAT:
DVD or LD player
TV or Satellite tuner
ST
ST
ENTER
DVR/VCR: Digital Video Recorder or VCR
CD:
CD player
TUNE
CD-R/TAPE: CD Recorder, Tape deck
or MD player
TV CONT:
TUNER:
TV or Cable TV tuner
FM/AM tuner
• VSX-D814 only – If you can’t find a preset
code that matches the component you
want to control, you can still teach the
remote individual commands from
another remote control (page 61).
1
While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks.
2
Press the MULTI CONTROL button for
• The remote control will exit an operation
after 1 minute of inactivity.
the component you want to control.
The LED lights.
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
09
3
Use the number buttons to enter the
nent (for example ꢀ, ꢁ, or other operation
preset code.
You can find the preset codes on page 66
(VSX-D514/D714) and page 68 (VSX-D814).
buttons). This can also be used to program
additional operations (buttons not covered in
the presets) after assigning a preset code.
The LED blinks again after you enter the code.
1
While pressing the RECEIVER button,
If the correct code has been input the power
of the component being input will turn on or
off.
press and hold the 2 button.
The LED blinks.
2
Press the MULTI CONTROL button for
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
the component you want to control.
The LED lights.
• To exit or cancel press RECEIVER.
• You can only input a code for the compo-
nent type written on each MULTI
CONTROL button (except RECEIVER and
TUNER).
3
Point the two remote controls
towards each other about 2–5 cm apart
then press the button that will be doing
the learning on this receiver’s remote
control.
• Even if you don’t input a preset code for
the TV (TV/SAT MULTI CONTROL button)
you will be able to control your TV using
the dedicated TV CONTROL on the
remote if you have assigned it to the TV
CONT button.
The LED blinks rapidly.
2 – 5 cm
4
Press the corresponding button on the
• You may not be able to use a particular
code even if it is listed on page 66.
other remote control that is sending
(teaching) the signal to this receiver’s
remote control.
If the operation has been learned success-
fully, the LED on this receiver’s remote will
blink once then light steadily.
• The remote control buttons will not be
able operate other equipment unless
preset with the method above.
4
Repeat steps 2 through 3 to try a
different code, or to enter a code for
another component you want to control.
If for some reason the operation hasn’t been
learned the LED will blink for three seconds
and then light steadily. If this happens, keep
pressing the (teaching) button as you vary the
distance between the two remotes, until you
see the LED light steadily.
5
When you’re done, press RECEIVER.
Programming signals from
other remote controls
If there is not enough memory for this button
to be learned by the remote, the LED will blink
twice and the operation will be canceled.
VSX-D814 only
If the preset code for your component is not
available, or the available preset codes do not
operate correctly, you can program signals
from the remote control of another compo-
5
To program additional signals for the
current component repeat steps 3 and 4.
To program operations for another compo-
nent exit and repeat steps 1 through 5.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Controlling the rest of your system
6
When you’re done, press RECEIVER to
Direct function
store the operation(s).
• Default setting: ON
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component.
This could let you, for example, use the
remote control to set up and listen to a CD on
the receiver and then use the remote control
to rewind a tape in your VCR while you
continue to listen to your CD player.
• Some commands from other remote
controls cannot be learned, but in most
cases the remotes just need to be moved
closer together or farther apart.
• Certain buttons represent operations that
cannot be learned from other remote
controls. These include: RECEIVERꢀ, the
MULTI CONTROL buttons, RECEIVER
CONTROL and MASTER VOLUME
buttons.
When direct function is on, any component
you select (using the MULTI CONTROL
buttons) will be selected by both the receiver
and the remote control. When you turn direct
function off, you can operate the remote
control without affecting the receiver.
Erasing all of your
1
While pressing the RECEIVER button,
programmed settings
press and hold the 4 button.
VSX-D814 only
The LED blinks.
This erases all of the buttons you have
programmed (in Programming signals from
other remote controls, above) and restores the
button to the factory default.
2
Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
3
Use the number buttons to enter
•
While pressing the RECEIVER button,
either 1 (direct on) or 2 (direct off).
The LED blinks again.
press and hold the 9 button for three
seconds.
The LED blinks steadily for three seconds and
then goes off.
4
Repeat steps 2 through 3 for the other
components you want to control.
5
When you’re done, press RECEIVER.
Clearing all the remote
control settings
You can clear all presets and restore the
factory default settings.
• You can’t use direct function for TUNER.
•
While pressing the RECEIVER button,
press and hold the 0 button for three
seconds.
The LED blinks three times indicating the
settings have been restored to the factory
presets.
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
Controls for TVs
09
This remote control can control components after entering the proper codes or teaching the
receiver the commands (see Setting the remote to control other components on page 60 for more
on this). Use the MULTI CONTROL buttons to select the component.
Button(s) Function
Components
TVꢀ
Switches the DTV on or off.
DTV
Switches the TV or CATV between standby and on.
Switches the TV input. (Not possible with all models.)
Cable TV/Satellite TV/TV
TV
INPUT
SELECT
CHANNEL Selects channels.
+/–
Cable TV/Satellite TV/TV/
DTV
VOLUME
+/–
Adjust the TV volume.
Cable TV/Satellite TV/TV/
DTV
TOP MENU Use as the TEXT ON button.
TV
MENU
Select different menus from the DTV functions.
DTV
Select the menu screen.
Cable TV/Satellite TV/TV
AUDIO
GUIDE
Use as the AUDIO button.
Cable TV/Satellite TV/TV/
DTV
Use as the GUIDE button for navigating.
Use as the TEXT OFF button.
Cable TV/Satellite TV/DTV
TV
ꢃ
ꢄ
Use to choose the BLUE commands on a DTV menu.
DTV
Use to choose the GREEN commands on a DTV menu. DTV
Use to choose the RED commands on a DTV menu. DTV
Use to choose the YELLOW commands on a DTV menu. DTV
ꢂ
ꢅ
ꢆ
ꢁ
Press to get information on DTV programs.
Switches DTV on or off.
DTV
DTV
DTV
ꢇ
Use to select closed captioning with DTV.
Use to select a specific TV channel.
Number
Buttons
Cable TV/Satellite TV/TV/
DTV
+10 button Use to add a decimal point when selecting a specific TV DTV
channel.
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Controlling the rest of your system
Button(s) Function
Components
ENTER/
DISC
Use to enter a channel.
Cable TV/Satellite TV/TV/
DTV
ꢁꢂꢄꢃ & Select or adjust and navigate items on the menu screen. DTV
ENTER
ENTER brings up the DTV menus.
Press to select or adjust and navigate items on the menu Cable TV/Satellite TV/TV/
screen.
DTV
• The four TV CONTROL buttons on the remote control are dedicated to control the TV
assigned to the TV CONT button. Thus if you only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL button. If you have two TVs, assign the main TV
to the TV CONT button.
Controls for other components
This remote control can control these components after entering the proper codes or teaching
the receiver the commands (see Setting the remote to control other components on page 60 for
more on this). Use the MULTI CONTROL buttons to select the component.
Button (s) Function
Components
SOURCEꢀ Press to switch the component between standby and on. CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
ꢃ
ꢅ
Press to return to the start of the current track.
Repeated presses skips to the start of previous tracks.
CD/MD/CD-R/DVD/LD
player
Play the reverse side of the tape on a reversible deck.
Press to advance to the start of the next track.
Cassette deck
CD/MD/CD-R/DVD/LD
Repeated presses skips to the start of following tracks. player
Play the forward side of the tape on a reversible deck.
Pause playback or recording.
Cassette deck
ꢄ
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
ꢁ
Start playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
ꢆ
Hold down for fast forward playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
09
Button (s) Function
Components
ꢇ
Hold down for fast reverse playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
ꢂ
Stops playback (on some models, pressing this when the CD/MD/CD-R/VCR/DVD/LD/
disc is already stopped will cause the disc tray to open). DVR player/Cassette deck
Number
buttons
Directly access tracks on a program source.
CD/MD/CD-R/VCR/LD
player
Use the number buttons to navigate the on-screen
display.
DVD/DVR player
+10 button Selects tracks higher than 10. (For example, press +10
CD/MD/CD-R/VCR/LD
player
then 3 to select track 13.)
ENTER/
DISC
Changes the search mode.
DVD
Chooses the disc.
Multiple CD player
VCR
Use as the ENTER button.
Displays the setup screen for DVR players.
Changes sides of the LD.
DVR player
LD player
TOPMENU Displays the disc ‘top’ menu of a DVD.
DVD/DVR player
MENU
Displays menus concerning the current DVD or DVR you DVD/DVR player
are using.
ꢄ
Pauses the tape.
Cassette deck
Cassette deck
Cassette deck
Cassette deck
DVD/DVR player
ꢃ
Stops the tape.
ENTER
ꢁ/ꢂ
Starts playback.
Fast rewinds/fast forwards the tape.
ꢁꢂꢄꢃ& Navigates DVD menu/options.
ENTER
GUIDE
Displays/changes the subtitles on multilingual DVDs.
DVD/DVR player
VCR/DVR player
CHANNEL Selects channels.
+/–
AUDIO
Changes the audio language or channel.
DVD/DVR player
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Controlling the rest of your system
Preset Code List (VSX-D514/D714)
You should have no problem controlling a component if you find the manufacturer in this list,
but please note that there are cases where codes for the manufacturer in the list will not work
for the model that you are using. There are also cases where only certain functions may be
controllable after assigning the proper preset code.
• The TV, STB and DTV codes can only be set to the TV/SAT or TV CONT button.
PHILIPS 607
SONY 604
TV / SAT
TV CONT
DVD
DTV
TAPE
Manufacturer Code
DENON 810
FISHER 813
JVC 802
PANASONIC 803
KENWOOD 804, 807
ONKYO 808, 809
SONY 801, 806
TEAC 805
YAMAHA 811, 812
PIONEER 800
Manufacturer Code
TOSHIBA 001
SONY 002
PANASONIC 003
JVC 004
SAMSUNG 005
SHARP 006
AKAI 007
RCA 009, 011
DENON 010
HITACHI 012
PHILIPS 013
ZENITH 014
Manufacturer Code
PIONEER 229, 207, 231,
232
PANASONIC 226, 230
VICTOR 227
PANASONIC 608, 622
TOSHIBA 605, 626
SHARP 602, 619, 627
HITACHI 606, 624, 625
SANYO 621, 614
MITSUBISHI 609
GOLDSTAR 610, 623
JVC 613
FUNAI 658
AIWA 660
NEC 659
GRANDIENTE 630
PIONEER 600
TOSHIBA 228
TUNER
Manufacturer Code
PIONEER 500
VCR
CD
THOMSON 015
SONY 016 (video game)
MICROSOFT
017(Videogame)
PIONEER 000, 008
Manufacturer Code
RCA 401, 413, 415
ZENITH 403
MAGNAVOX 414
FISHER 426, 412, 427
PANASONIC 408 , 432 ,
433
Manufacturer Code
DENON 309
JVC 303
PANASONIC 304, 326
KENWOOD 310, 311, 321
MARANTZ 323
ONKYO 320, 308, 307
PHILIPS 312, 322
RCA 302, 319
STB (SATELLITE/
TV / SAT
TV CONT
CATV)
Manufacturer Code
JERROLD 701, 702, 703,
704, 711, 712, 713 , 714,
715, 716
S.ATLANTA 705, 706, 708,
709
LD
TOSHIBA 405
Manufacturer Code
SONY 101
PANASONIC 105, 106
PHILIPS 104
KENWOOD 103
RCA 107
JVC 428, 430, 429, 431, 407
HITACHI 406, 436, 434
SONY 416, 417, 404, 457,
458 , 459
MITSUBISHI 409, 420, 421,
422, 423, 424
SANYO 410, 425, 435
SHARP 402, 418, 419
GOLDSTAR 411
GRADIENTE 441
PIONEER 400
SANYO 313
ZENITH 707, 717, 710
PIONEER 700, 718
SONY 301, 316, 317, 318
TEAC 305, 306, 327, 324,
325
YAMAHA 315 , 314 , 328
PIONEER 300
PIONEER 100
On digital STB
TV / SAT
TV CONT
TV / SAT
TV CONT
TV
ManufacturerCode
RCA 201, 203, 209
SONY 202
ECHOSTAR 205
PRIMESTAR 206
BELL 208
Manufacturer Code
RCA 601, 615, 616, 617,
618
ZENITH 603, 620
MAGNAVOX 612, 629
GE 611, 628
CD-R
Manufacturer Code
PHILIPS 346
DVD Recorder
Manufacturer Code
PIONEER 456
PIONEER 345
PIONEER 200
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
09
MD
Manufacturer Code
SONY 901
KENWOOD 903
SHARP 902
TEAC 904
ONKYO 905
DENON 906
PIONEER 900, 907
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Controlling the rest of your system
Preset Code List (VSX-D814)
You should have no problem controlling a component if you find the manufacturer in this list,
but please note that there are cases where codes for the manufacturer in the list will not work
for the model that you are using. There are also cases where only certain functions may be
controllable after assigning the proper preset code.
• The TV CONT button will only accept preset codes for TV, STB and DTV.
CLATRONIC 5025
CRAIG 5026, 5027, 5028,
5029
CROSLEX 5030
CURTIS MATHIS
MIVAR 5100
NEC 5101, 5102
NOKIA OCEANIC 5103
NORDMENDE 5104,5105
OKANO 5106
ONWA 5107
PANASONIC 5108, 5109,
5110, 5111
PHILCO 5112, 5113, 5114
PHONOLA 5115
PORTLAND 5116, 5117
PROSCAN 5118
QUASAR 5119, 5120
RADIO 5121, 5122
RADIOSHACK 5123,5124,
5125
RADIOLA 5126
RCA/PROSCAN 5127,
5128, 5129
SABA 5130
SAMSUNG 5131, 5132
SANYO 5133, 5134, 5135
DVD
VCR
Manufacturer Code
TOSHIBA 1010
SONY 1009
SAMSUNG 1008
JVC 1005
RCA 1007
DENON 1004
PHILIPS 1006
Manufacturer Code
PIONEER 3001, 3002,
3003, 3004, 3005
ADMIRAL 3006
AIWA 3007, 3008, 3009
AKAI 3010, 3011
ALBA 3012
AUDIO DYNAMIC 3013,
3014
BELL&HOWELL 3015
BLAUPUNKT 3016, 3017
BROCSONIC 3018, 3019
BUSH 3020
CANON 3021
CGM 3022, 3023
CITIZEN 3024
CLATRONIC 3025
CRAIG 3026
CURTIS MATHIS 3027,
3028, 3029
DAEWOO3030, 3031,
3032
DBX 3033, 3034
DIMENSIA 3035
EMERSON 3036,
3037,3038, 3039, 3040,
3041
FERGUSON 3042
FISHER 3043, 3044, 3045,
3046
FUNAI 3047, 3048
GE 3049, 3050, 3051
GOLDSTAR 3052
GOODMANS 3053, 3054
GRUNDIG 3055
HITACHI 3056, 3057, 3058,
3059, 3060
5031,5032, 5033
DAEWOO 5034, 5035,
5036, 5037, 5038, 5039
DAYTRON 5040
DUAL 5041
EMERSON 5042,
5043,5044,5045, 5046,
5047, 5048
FERGUSON 5049, 5050
FIRST 5051
FISHER 5052
TOSHIBA 1010
YAMAHA 1011, 1012
PIONEER 1001, 1002, 1003
LD
Manufacturer Code
SONY 2008
FUJITSU 5053
PHILIPS 2006, 2007
PANASONIC 2005
KENWOOD 2004
DENON 2003
YAMAHA 2009
PIONEER 2001, 2002
FUNAI 5054, 5055, 5056
GE 5057, 5058, 5059, 5060
GOLDSTAR 5061, 5062,
5063, 5064
GOODMANS 5065, 5066
HITACHI 5067, 5068, 5069, SCHNEIDER 5136
5070, 5071
ICE 5072
IRRADIO 5073
ITT/NOKIA 5074,5075
JC PENNY 5076, 5077,
5078, 5079
JVC 5080, 5081
KENDO 5082
KTV 5083, 5084
LOEWE 5085
LXI 5086, 5087, 5088, 5089,
5090
MAGNAVOX 5091
MARK 5092
MATSUI 5093, 5094
MATSUSHITA 5095, 5096
MEDION 5097
SCOTT 5137, 5138
SHARP 5139, 5140
SIEMENS 5141
SIGNATURE 5142, 5143
SONY 5144, 5145
SYLVANIA 5146, 5147
SYMPHONIC 5148
TATUNG 5149
TV
Manufacturer Code
PIONEER 5001,5002, 5003,
5004, 5005, 5006, 5007,
5008, 5009, 5010
ADMIRAL 5011, 5012.
5013
AIWA 5014, 5015
AKAI 5016
ALBA 5017
AOC 5018
BESTAR 5019
BLAUPUNKT 5020
BLUE SKY 5021
BRANDT 5022
BROCSONIC 5023
BUSH 5024
TELEFUNKEN 5150, 5151
THORN 5152
TOSHIBA 5153, 5154
UNIVERSUM 5155
VIDECH 5156, 5157
W. WHOUSE 5158
WARDS 5159, 5160, 5161
WATSON 5162
INSTANT REPLAY 3061,
3062
ITT/NOKIA 3063
ZENITH 5163, 5164
MITSUBISHI 5098, 5099
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
09
JC PENNY 3064, 3065,
3066, 3067, 3068, 3069
JVC 3070, 3071, 3072
KENDO 3073
KENWOOD 3074, 3075,
3076
LOEWE 3077, 3078
LUXOR 3079
LXI 3080, 3081, 3082,
3083, 3084, 3085, 3086
MARANTZ 3087, 3088
MARTA 3089
SCOTT 3141, 3142, 3143,
3144, 3145, 3146, 3147
SEG 3148
HNS/HUGHES 6014
HITACHI 6015
ITT/NOKIA 6016
JERROLD 6017, 6018,
6019, 6020, 6021
NEC 6022, 6023
OAK 6024, 6025, 6026
PANASONIC 6027, 6028,
6029
PHILIPS 6030, 6031
PRIMESTAR 6048
RADIO SHACK 6032
RCA 6033
SAMSUNG 6034, 6035
SCIENTIFIC ATLANTA
6036, 6037, 6038
SIEMENS 6039, 6040
SONY 6041
TOSHIBA 6042, 6043
TOCOM 6044
TECHNICS 7034, 7035
YAMAHA 7036, 7037,
7038, 7039
DENON 7040, 7041
JVC 7042
KENWOOD 7043
PHILIPS 7044
SONY 7045
SELECO 3149
SHARP 3150, 3151, 3152
SIEMENS 3153, 3154, 3155
SIGNATURE 3156, 3157
SONY 3158, 3159, 3160,
3161, 3162, 3163
SYLVANIA 3164, 3165,
3166, 3167
SYMPHONIC 3168
TANDBERG 3169
TASHIRO 3170
TATUNG 3171, 3172
TEAC 3173, 3174, 3175
TECHNICS 3176, 3177
TELEFUNKEN 3178, 3179
THORN 3180, 3181
TOSHIBA 3182, 3183, 3184
UNIVERSUM 3185, 3186,
3187
W. WHOUSE 3188
WARDS 3189, 3190, 3191,
3192, 3193
YAMAHA 3194, 3195,
3196
DVR
Manufacturer Code
PIONEER 4001
MATSUI 3090
MEMOREX 3091, 3092
MINOLTA 3093, 3094
MITSUBISHI 3095, 3096,
3097,3098, 3099
MULTITECH 3100, 3101,
3102
MD
Manufacturer Code
PIONEER 8001, 8002, 8003
DENON 8004
JVC 8005
KENWOOD 8006
SONY 8007
NEC 3103
NOKIA OCEANIC 3104
NOKIA 3105, 3106
NORDMENDE 3107
OKANO 3108
OLYMPIC 3109, 3110
ORION 3111
PANASONIC 3112, 3113,
3114, 3115, 3116, 3117
PENTAX 3118, 3119
PHILCO 3120, 3121
PHILIPS 3122
ZENITH 6045, 6046
YAMAHA 8008, 8009
CD/CD-R
TAPE
Manufacturer Code
PIONEER 7001, 7002
DENON 7003, 7004, 7005
FISHER 7006, 7007
JVC 7008, 7009, 7010,
7011
KENWOOD 7012, 7013,
7014, 7015, 7016
MAGNAVOX 7017, 7018
MARANTZ 7019
ONKYO 7020, 7021
PANASONIC 7022, 7023
PHILIPS 7024, 7025
RCA 7026, 7027
SANYO 7028
SHARP 7029
Manufacturer Code
PIONEER 9001, 9002
DENON 9003, 9004
FISHER 9005, 9006
JVC 9007, 9008
ZENITH 3197
STB
KENWOOD 9009, 9010,
9011
Manufacturer Code
PIONEER 6001, 6002,
6003, 6004, 6005, 6006
BELL 6049
BLAUPUNKT 6007
ECHOSTAR 6047
GENERAL INSTRUMENT
6008
PHONOLA 3123
NAKAMICHI 9012
ONKYO 9013, 9014, 9015
PHILIPS 9016, 9017
SONY 9018, 9019
TEAC 9020, 9021
TECHNICS 9022
QUASAR 3124, 3125
RCA/PROSCAN 3126
REALISTIC 3127, 3128,
3129, 3130, 3131, 3132
SABA 3133
SAMSUNG 3134, 3135
SANSUI 3136
YAMAHA 9023, 9024,
9025, 9026
GOLDSTAR 6009
GRUNDIG 6010, 6011
HAMLIN 6012, 6013
SANYO 3137, 3138
SCHNEIDER 3139, 3140
SONY 7030
TEAC 7031, 7032, 7033
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
Chapter 10:
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie
in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest
Pioneer authorized service center or your dealer to carry out repair work.
Problem
The power does not turn on. • Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
Remedy
• Make sure there are no loose strands of speaker wire touching the
rear panel. This could cause the receiver to shut off automatically.
• If the power shuts off automatically, take the unit to your nearest
Pioneer authorized service center or your dealer for servicing.
• The unit may have been switched on using the wrong voltage
setting. Make sure you switch the VOLTAGE SELECTOR on the rear
panel to the right voltage for your country or region, then reset the
unit (page 72) before switching on again.
No sound is output when a
function is selected.
• Make sure the component is connected correctly (refer to
Connecting up on page 14).
• Press MUTE on the remote control to turn muting off.
• Adjust the MASTER VOLUME.
No image is output when a
function is selected.
• Make sure the component is connected correctly (refer to
Connecting up on page 14).
• Select the correct component (use the MULTI CONTROL buttons).
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
10
Problem
Remedy
Considerable noise in radio
broadcasts.
• Tune in the correct frequency.
• Connect the antenna (refer to page 19).
• Route any loose cables away from the antenna terminals and
wires.
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (refer to page 19).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (refer to
page 19).
• Turn off the equipment causing the noise or move it away from the
receiver.
• Move antennas farther away from equipment causing the noise.
Broadcast stations cannot be • Connect an outdoor antenna (refer to page 19).
selected automatically.
No sound from surround or
center speakers.
• Refer to Speaker setting on page 46 to check the speaker settings.
• VSX-D714/D814 only – Refer to Manually calibrating your listening
area (MCACC) on page 52 to check the speaker levels.
• Connect the speakers properly (refer to page 20).
No sound from surround
back speakers (VSX-D714/
D814 only).
• Refer to Surround back speaker setting on page 46 to check the
surround back speaker settings.
• Refer to Manually calibrating your listening area (MCACC) on
page 52 to check the speaker levels.
• Refer to Using the Surround Back Channel (SB CH) on page 39 to
make sure the SB CH MODE and the sound mode are set for
surround back sound.
No sound from subwoofer.
• Make sure the subwoofer is switched on.
• If the subwoofer has a volume knob, make sure it’s turned up.
• Switch the Subwoofer setting on page 47 to YES or PLUS.
• Switch the LFE attenuator setting on page 47 to 0 dB or 10 dB.
• The Dolby Digital or DTS source you are listening to does not have
an LFE channel.
Noise during playback of a
cassette deck.
• Move the cassette deck further from your receiver, until the noise
disappears.
Sound is produced from
other components, but not
from LD or DVD player.
• Set the SIGNAL SELECT to AUTO, DIGITAL or ANALOG
according to the type of connections made. (refer to page 38).
• Set the digital input settings correctly (refer to page 50).
• Make digital connections (refer to page 15) and set the SIGNAL
SELECT to DIGITAL (refer to page 38).
• Refer to the instruction manual supplied with the DVD player.
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
Problem
Remedy
No sound is output or a noise • Set the digital volume level of the player to full, or to the neutral
is output when software with position.
DTS is played back.
When a search is performed • This is not a malfunction, but be sure to turn the volume down to
by a DTS compatible CD
player during playback, noise
is output.
prevent the output of loud noise from your speakers.
Can’t operate the remote
control.
• Replace the batteries (refer to page 5).
• Operate within 7 m, 30° of the remote sensor on the front panel
(refer to page 6).
• Remove the obstacle or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
The display is dark or off.
• Press FL DIMMER on the remote control repeatedly to return to
the default.
• If the unit does not operate normally due to external effects such as static electricity
disconnect the power plug from the outlet and insert again to return to normal operating
conditions.
Resetting the main unit
Switching the speaker
impedance
Use this procedure to reset all the receiver’s
settings to the factory default. Use the front
panel controls to do this.
We recommend using speakers of 8Ω with
this system, but it is possible to switch the
impedance setting if you plan to use speakers
with a 6Ω impedance rating.
1
Switch the receiver on.
2
While holding down the TONE button,
•
With the receiver in standby, press ꢀ
press and hold the ꢀ STANDBY/ON
STANDBY/ON while holding down the
SPEAKERS / SPEAKER IMPEDANCE button.
Each time you do this, you switch between the
impedance settings:
button for about three seconds.
3
When you see RESET? appear in the
display, press the TONE button.
OK? shows in the display.
• SP 6 OHM – Use this setting if your
speakers are rated at 6Ω.
4
Press TONE once more to confirm.
OK appears in the display to indicate that the
receiver has been reset to the factory default
settings.
• SP 8 OHM – Use this setting if your
speakers are rated at 8Ω or more.
72
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
10
Signal-to-Noise Ratio
(IHF, short circuited, A network)
CD, DVR/VCR, CD-R/TAPE/MD,
Specifications
Amplifier section
DVD/LD, TV/SAT . . . . . . . . . . . . . . . . . . . . . 96 dB
Continuous power output (stereo)
Front . . . . . . .100 W (DIN 1kHz, THD 1.0%, 8 Ω)
Signal-to Noise Ratio
[EIA, at 1 W (1 kHz)]
CD, DVR/VCR, CD-R/TAPE/MD,
DVD/LD, TV/SAT . . . . . . . . . . . . . . . . . . . . . 79 dB
Continuous power output (surround)
Front . . . . 100 W per channel (1kHz, 1.0%, 8 Ω)
Center . . . . . . . . . . . . . . 100 W (1kHz, 1.0%, 8 Ω)
Surround . . . . . . . . . . . . . . . 100 W per channel
(1kHz, 1.0%, 8 Ω)
Video Section
Input (Sensitivity/Impedance)
DVR/VCR, DVD/LD, TV/SAT . . . . . . .1 Vp-p/75 Ω
Surround Back. . . . . . 100 W (1kHz, 1.0 %, 8 Ω)
(VSX-D814 only)
Output (Level/Impedance)
DVR/VCR, MONITOR OUT . . . . . . . .1 Vp-p/75 Ω
Audio section
Input (Sensitivity/Impedance)
CD, DVR/VCR, CD-R/TAPE/MD,
DVD/LD, TV/SAT. . . . . . . . . . . . . . 200 mV/47 kΩ
Frequency response
DVR/VCR, DVD/LD,
TV/SAT ꢂ MONITOR . . . . .5 Hz to 7 MHz dB
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . 55 dB
Frequency response
CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD,
TV/SAT . . . . . . . . . . . . 5 Hz to 100,000 Hz dB
Component video section
VSX-D714/D814 only
Output (Level/Impedance)
DVR/VCR REC, CD-R/TAPE/
MD REC . . . . . . . . . . . . . . . . . . . . 200 mV/2.2 kΩ
Input (Sensitivity)
DVD/LD, TV/SAT . . . . . . . . . . . . . . . .1 Vp-p/75 Ω
Output (Level/Impedance)
MONITOR OUT . . . . . . . . . . . . . . . . .1 Vp-p/75 Ω
Tone control
Bass . . . . . . . . . . . . . . . . . . . . . . 6 dB (100 Hz)
Treble . . . . . . . . . . . . . . . . . . . . . 6 dB (10 kHz)
Loudness . . . . +6.5 dB/+3 dB (100 Hz/10 kHz)
(at volume level –50 dB)
Frequency response
DVD/LD,
TV/SAT ꢂ MONITOR . . . .5 Hz to 40 MHz dB
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . 55 dB
Signal-to-Noise Ratio
DIN (Continuous rated power output /
50mW)
CD, DVR/VCR, CD-R/TAPE/MD,
DVD/LD, TV/SAT. . . . . . . . . . . . . . . . . . .88/64 dB
73
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
Furnished Parts
FM Tuner Section
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . 1
FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . 1
Dry cell batteries (AA size IEC R6) . . . . . . . . 2
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cords:
Frequency Range . . . . . . .87.5 MHz to 108 MHz
Usable Sensitivity . . . . . . . . Mono:13.2 dBf, IHF
(1.3 µV/ 75 Ω)
50 dB Quieting Sensitivity . . . . . Mono: 20.2 dB
Stereo: 38.6 dBf
VSX-D514/D714/D814-K (black models) . . . 2
(Round 2-pin type and Australian type)
VSX-D514/D714-S (silver models – Except
Australian model) . . . . . . . . . . . . . . . . . . . . . 3
(Round 2-pin type, flat blade 2-pin type
and UK 3-pin type)
VSX-D814-S (silver model) . . . . . . . . . . . . . . 4
(Round 2-pin type, flat blade 2-pin type,
UK 3-pin type and Australian type)
Signal-to-Noise Ratio . .Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion. . . . . . . . . . . . . . Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity . . . . . . . . . . 60dB
(400 kHz)
Stereo Separation. . . . . . . . . . . . . 40 dB (1 kHz)
Frequency Response . . . . . . . . .30 Hz to 15 kHz
(
1 dB)
Antenna Input (DIN). . . . . . . . 75 Ω unbalanced
Power plug adaptor (VSX-D514/D714/D814-K
only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
J-shape plug (VSX-D514/D714/D814-K only). . . 1
These operating instructions . . . . . . . . . . . . . . 1
AM Tuner Section
Frequency Range
9kHz step. . . . . . . . . . . . 531 kHz to 1,602 kHz
10kHz step. . . . . . . . . . . 530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna) . . . . . .350 µV/m
Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . 25 dB
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . 50 dB
Antenna. . . . . . . . . . . . . . . . . . . . . Loop antenna
• Specifications and the design are subject
to possible modifications without notice,
due to improvements.
Miscellaneous
Cleaning the unit
• Use a polishing cloth or dry cloth to wipe
off dust and dirt.
Power requirements. . . . . AC 110/120–127/220/
240 V (switchable), 50/60Hz
Power consumption:
• When the surface is dirty, wipe with a soft
cloth dipped in some neutral cleanser
diluted five or six times with water, and
wrung out well, and then wipe again with
a dry cloth. Do not use furniture wax or
cleansers.
VSX-D514/D714:
Singapore/Malaysia models . . . . . . 250 W
All other models . . . . . . . . . . . . . . . . 500 W
VSX-D814
Singapore/Malaysia models . . . . . . 280 W
All other models . . . . . . . . . . . . . . . . 600 W
In standby . . . . . . . . . . . . . . . . . . . . . . . . 0.9 W
Dimensions. . . 420 (W) x 158 (H) x 401 (D) mm
Weight (without package)
• Never use thinners, benzine, insecticide
sprays or other chemicals on or near this
unit, since these will corrode the surface.
VSX-D514. . . . . . . . . . . . . . . . . . . . . . . .10.0 kg
VSX-D714/D814. . . . . . . . . . . . . . . . . . .10.6 kg
74
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation
Copyright©2004 Pioneer Corporation
All rights reserved
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002E
<04C00001>
Printed in
<XRB3030-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|