Pioneer DVD Recorder T502202 User Manual

PRV-LX1Guide  
EDL Commands  
2.0 EXAMPLE OF AN EDL  
An EDL designed for the Pioneer PRV-LX1 may include up to 999 lines/commands. If the  
list has more than six entries, scroll through the entries displayed in the data window (right)  
when working with an EDL. The example shown below includes an initialization command  
and several recording commands in a scrollable list.  
Clicking on next reveals the following commands in the EDL. The first line of the revealed  
commands is prev. Prev returns you to the previous series of commands.  
The EDL below is an example of the following commands in sequential order:  
Header  
Initialization of a DVD-RW disc  
Recording a Title with three chapters  
Adding and recording a forth chapter for the Title  
Wait to allow a source tape exchange  
Recording a Title with one chapter from the new source  
Finalization of the DVD-RW disc  
Header: PIONEER-DVDRec-EDL 001  
Entry #  
001  
Operation Parameter  
Description  
INI  
(not applicable)  
Initialize the DVD-RW disc  
Record Title 1 – Chapter 1  
Record Title 1 – Chapter 2  
Record Title 1 – Chapter 3  
Record as a continued portion of Title 1  
Create Chapter 4 for Title 1  
Wait  
002  
REC  
CHP  
CHP  
REC  
CHP  
WAI  
REC  
FNL  
01:00:05:00 01:10:12:00 PAUSE  
01:03:25:00  
002  
002  
01:06:30:00  
003  
01:13:45:00 01:20:30:00 STOP  
01:17:30:00  
003  
004  
(not applicable)  
005  
01:25:00:00 01:26:00:00 STOP  
(not applicable)  
Record Title 2  
006  
Finalize the DVD-RW disc  
Page 3 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PRV-LX1Guide  
EDL Commands  
3.0 COMMAND STRUCTURE  
To build your EDLs, apply the command structure demonstrated in the example shown in  
Section 2. Each command is numbered and must be in consecutive order. When creating  
your EDLs, use the structure outlined below.  
Note: Time code is SMPTE Non-Drop or Drop Frame.  
Definitions:  
### – Entry Number  
OP – Operation  
PAR – Parameter  
Each operation contains a starting Entry Number and an Operation Command. An Entry  
Number consists of three sequential digits. An Operation Command uses three characters.  
A third field containing a parameter may be required. Parameters can consist of multiple  
parts. Although parameters are often a series of numbers and letters, it is unnecessary to  
separate the characters by a space, tab or comma. However, for ease of reading, a space  
may separate one parameter from the next.  
Header:  
The EDL command structure requires that a header must be the top of the list. The header  
is as follows: PIONEER-DVDRec-EDL 001  
3.1  
DVD-RW Disc Initialization  
Entry  
Operation Parameter  
###  
INI  
This command can only be used as the first entry in an EDL. It will be ignored if  
the PRV-LX1 target is set for HDD. There are no parameters for the initialization  
command.  
3.2  
In / Out Point Record  
Entry  
Operation Parameter  
REC In Point, Out Point and Stop (or Pause)  
###  
In / out points are in the first parameter. The second parameter consists of either  
STOP or PAUSE. If several In/Out recordings are present in the EDL, the last  
In/Out recording must include STOP as the final recording operation.  
Page 4 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PRV-LX1Guide  
EDL Commands  
3.3  
3.4  
3.5  
Chapter Point  
Entry  
Operation Parameter  
CHP Chapter Point (Chapter points are in SMPTE time code)  
###  
Each chapter point operation entry needs to come right after the Title Record entry  
(In/ OUT Point Rec) in the order of occurrence. A Chapter Point must have the  
same Entry Number as the In/Out Point Rec.  
Wait  
Entry Operation  
### WAI  
Parameter  
Wait is useful when the source tape requires exchanging. When executed, a  
window prompts the user to change source tapes. When the exchange has been  
completed the user presses Enter to continue execution of the EDL.  
Finalize  
Entry  
Operation Parameter  
###  
FNL  
This command can only used as the last entry in an EDL. It will be ignored if the  
PRV-LX1 target is set for HDD. There are no parameters for the finalization  
command.  
Page 5 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PRV-LX1Guide  
EDL Commands  
4.0 EDL IMPORT METHODS  
Edit Decision Lists can be imported into the PRV-LX1using one of two methods. The first  
method is to import a list using network connection and place the file in the EDL folder.  
The second method is to place the EDL file on a CD.  
In both cases, the user must choose APP from the Function Menu and import the EDL file  
into the library from the import directory or from a CD. Once added to the library, the user  
can choose the EDL file for execution.  
For additional information about importing EDL files, please refer to the section entitled,  
Importing Image Data, Edit Lists in the PRV-LX1 Operating Instructions.  
Page 6 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Peavey Electronic Keyboard pRP 6 User Manual
Pelican Home Safety Product 2360 User Manual
Philips Baby Monitor SC765 User Manual
Philips Network Router CGA7740N User Manual
Philips Stereo Amplifier SA5211 User Manual
Philips Universal Remote DRC800 User Manual
Pioneer Cassette Player KEH P4950 User Manual
Planet Technology Digital Camera ICA 350 User Manual
Praktica Digital Camera D00311N User Manual
ProForm Exercise Bike PFEX724111 User Manual