Pioneer DVD Player DV 575K s User Manual

DVD Player  
DV-575K-s  
Operating Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER-CORD CAUTION  
This product incorporates copyright protection  
technology that is protected by method claims  
of certain U.S. patents and other intellectual  
property rights owned by Macrovision  
Corporation and other rights owners. Use of  
this copyright protection technology must be  
authorized by Macrovision Corporation, and is  
intended for home and other limited viewing  
uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering  
or disassembly is prohibited.  
Handle the power cord by the plug. Do not pull out the  
plug by tugging the cord and never touch the power  
cord when your hands are wet as this could cause a  
short circuit or electric shock. Do not place the unit, a  
piece of furniture, etc., on the power cord, or pinch the  
cord. Never make a knot in the cord or tie it with other  
cords. The power cords should be routed such that they  
are not likely to be stepped on. A damaged power cord  
can cause a fire or give you an electrical shock. Check  
the power cord once in a while. When you find it  
damaged, ask your nearest PIONEER authorized  
service center or your dealer for a replacement. S002_En  
This product includes FontAvenue® fonts  
licenced by NEC corporation. FontAvenue is  
a registered trademark of NEC Corporation.  
When disposing of used batteries, please comply  
with governmental regulations or  
environmental public instruction’s rules that  
apply in your country/area.  
D3-4-2-3-1_En  
This product is for general household purposes.  
Any failure due to use for other than household  
purposes (such as long-term use for business  
purposes in a restaurant or use in a car or ship)  
and which requires repair will be charged for  
even during the warranty period.  
K041_En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Switching subtitles . . . . . . . . . . . . . . . . . .28  
Switching audio language/channels . . . . .28  
Zooming the screen. . . . . . . . . . . . . . . . . .29  
Switching camera angles . . . . . . . . . . . . .29  
Displaying disc information. . . . . . . . . . . .29  
01 Before you start  
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
What’s in the box . . . . . . . . . . . . . . . . . . . . 5  
Hints on installation. . . . . . . . . . . . . . . . . . 6  
Disc/content format playback compatibility  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
06 Audio Settings and Video Adjust  
menus  
02 Connecting up  
Easy connections . . . . . . . . . . . . . . . . . . . . 9  
Audio Settings menu. . . . . . . . . . . . . . . . .30  
Connecting using the S-video output . . . . 10  
Connecting using the component video  
output . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting to an AV receiver . . . . . . . . . . 12  
Video Adjust menu . . . . . . . . . . . . . . . . . .31  
07 Initial Settings menu  
Using the Initial Settings menu . . . . . . . . .32  
Digital Audio Out settings . . . . . . . . . . . . .32  
Video Output settings . . . . . . . . . . . . . . . .33  
Language settings. . . . . . . . . . . . . . . . . . .33  
Display settings. . . . . . . . . . . . . . . . . . . . .34  
Parental Lock . . . . . . . . . . . . . . . . . . . . . .35  
03 Controls and displays  
Front panel. . . . . . . . . . . . . . . . . . . . . . . . 13  
Remote control . . . . . . . . . . . . . . . . . . . . 14  
04 Getting started  
Switching on . . . . . . . . . . . . . . . . . . . . . . 15  
08 Additional information  
Using the on-screen displays . . . . . . . . . . 15  
Setting up the player for your TV. . . . . . . . 16  
Setting the language of this player’s  
on-screen displays . . . . . . . . . . . . . . . . . . 16  
Playing discs . . . . . . . . . . . . . . . . . . . . . . 16  
Singing Your Favorite Songs Along with  
Karaoke Discs . . . . . . . . . . . . . . . . . . . . . 19  
Taking care of your player and discs . . . . .36  
Screen sizes and disc formats. . . . . . . . . .37  
Setting the TV system . . . . . . . . . . . . . . . .38  
Resetting the player. . . . . . . . . . . . . . . . . .38  
Power reset . . . . . . . . . . . . . . . . . . . . . . . .38  
DVD-Video regions . . . . . . . . . . . . . . . . . .39  
Selecting languages using the language  
code list. . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Language code list . . . . . . . . . . . . . . . . . .40  
Country code list . . . . . . . . . . . . . . . . . . . .40  
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Specifications . . . . . . . . . . . . . . . . . . . . . .42  
05 Playing discs  
Scanning discs . . . . . . . . . . . . . . . . . . . . 22  
Playing in slow motion . . . . . . . . . . . . . . . 22  
Frame advance/frame reverse . . . . . . . . . 22  
Viewing a JPEG slideshow . . . . . . . . . . . . 23  
Browsing video content with the Disc  
Navigator . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Browsing WMA, MP3 and JPEG files with  
the Disc Navigator . . . . . . . . . . . . . . . . . . 24  
Looping a section of a disc. . . . . . . . . . . . 25  
Using repeat play . . . . . . . . . . . . . . . . . . . 25  
Using random play. . . . . . . . . . . . . . . . . . 26  
Creating a program list . . . . . . . . . . . . . . 27  
Searching a disc . . . . . . . . . . . . . . . . . . . 28  
4
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
01  
CBhaepfteor 1re you start  
Energy saving design  
Features  
An auto power-off function switches the player  
into standby if not used for about 30 minutes.  
24-bit/192kHz compatible DAC  
The on-board 24-bit/192kHz DAC means that  
this player is fully compatible with high  
sampling-rate discs, capable of delivering  
exceptional sound quality in terms of dynamic  
range, low-level resolution and high-frequency  
detail.  
What’s in the box  
Please confirm that the following accessories  
are in the box when you open it.  
• Remote control  
Surround sound entertainment with  
Dolby Digital and DTS software  
• AA/R6P dry cell batteries x2  
• Audio/video cable (red/white/yellow plugs)  
• Power cable  
When connected to a suitable AV amplifier or  
receiver, this player gives great surround  
sound with Dolby Digital and DTS discs.  
• Operating instructions x2  
PureCinema Progressive Scan video  
When connected to a progressive scan-  
compatible TV or monitor using the  
component video outputs, you can enjoy  
extremely stable, flicker free images, with the  
same frame refresh rate as the original movie.  
New Disc Navigator with moving  
pictures  
The new Disc Navigator enables you play the  
first few seconds of each title or chapter in a  
thumbnail image on screen.  
DSP effects for enhanced playback  
See Audio Settings and Video Adjust menus on  
page 30.  
Picture zoom  
See Zooming the screen on page 29.  
MP3 and WMA compatibility  
See Compressed audio compatibility on page 7.  
JPEG compatibility  
See JPEG file compatibility on page 8.  
5
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
Before you start  
Don’t...  
Putting the batteries in the remote  
• Use in a place exposed to high  
temperatures or humidity, including near  
radiators and other heat-generating  
appliances.  
Open the battery compartment cover  
and insert the batteries as shown.  
Use two AA/R6P batteries and follow the  
indications (, ) inside the compartment.  
Close the cover when you’re finished.  
• Place on a window sill or a place where the  
player will be exposed to direct sunlight.  
• Use in an excessively dusty or damp  
environment.  
• Place directly on top of an amplifier, or  
other component in your stereo system  
that becomes hot in use.  
Important  
• Use near a television or monitor as you may  
experience interference—especially if the  
television uses an indoor antenna.  
Incorrect use of batteries can result in hazards  
such as leakage and bursting. Please observe  
the following:  
• Use in a kitchen or other room where the  
player may be exposed to smoke or steam.  
• Don’t mix new and old batteries together.  
• Use on a thick rug or carpet, or cover with  
cloth—this may prevent proper cooling of  
the unit.  
• Don’t use different kinds of battery  
together—although they may look similar,  
different batteries may have different  
voltages.  
• Place on an unstable surface, or one that is  
not large enough to support all four of the  
unit’s feet.  
• Make sure that the plus and minus ends of  
each battery match the indications in the  
battery compartment.  
• Remove batteries from equipment that  
isn’t going to be used for a month or more.  
• When disposing of used batteries, please  
comply with governmental regulations or  
environmental public instruction’s rules  
that apply in your country or area.  
Hints on installation  
We want you to enjoy using this product for  
years to come, so please use the following  
guidelines when choosing a suitable location:  
Do...  
• Use in a well-ventilated room.  
• Place on a solid, flat, level surface, such as  
a table, shelf or stereo rack.  
6
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
01  
CD-R/RW compatibility  
Disc/content format playback  
compatibility  
• Compatible formats: CD-Audio, Video CD/  
Super VCD, ISO 9660 CD-ROM* containing  
MP3, WMA or JPEG files  
This player is compatible with a wide range of  
disc types (media) and formats. Playable discs  
will generally feature one of the following logos  
on the disc and/or disc packaging. Note  
however that some disc types, such as  
recordable CD and DVD, may be in an  
unplayable format—see below for further  
compatibility information.  
* ISO 9660 Level 1 or 2 compliant. CD  
physical format: Mode1, Mode2 XA Form1.  
Romeo and Joliet file systems are both  
compatible with this player.  
• Multi-session playback: No  
• Unfinalized disc playback: No  
Please also note that recordable discs cannot be  
recorded using this player.  
DVD-R/RW compatibility  
• Compatible formats: DVD-Video, Video  
Recording (VR)*  
* Edit points may not play exactly as edited;  
screen may go momentarily blank at edited  
points.  
DVD-Video  
DVD-R  
DVD-RW  
• Unfinalized playback: No  
• WMA/MP3/JPEG file playback on DVD-R/  
RW: No  
Audio CD  
Video CD  
CD-R  
CD-RW  
Compressed audio compatibility  
• Compatible formats: MPEG-1 Audio Layer 3  
(MP3), Windows Media Audio (WMA)  
Fujicolor CD  
• Sampling rates: 32, 44.1 or 48kHz  
is a trademark of Fuji Photo Film Co. Ltd.  
• Bit-rates: Any (128Kbps or higher  
recommended)  
• Also compatible with KODAK Picture CD  
This player supports the IEC’s Super VCD stan-  
dard. Compared to the Video CD standard,  
Super VCD offers superior picture quality, and  
allows two stereo soundtracks to be recorded.  
Super VCD also supports the widescreen size.  
• VBR (variable bit rate) MP3 playback: No  
• VBR WMA playback: No  
• WMA lossless encoding compatible: No  
• DRM (Digital Rights Management)  
compatible: Yes (DRM-protected audio  
files will not play in this player—see also  
DRM in the Glossary on page 41)  
• File extensions: .mp3, .wma (these must be  
used for the player to recognize MP3 and  
WMA files – do not use for other file types)  
Super VCD  
• File structure: Up to 299 folders; up to 648  
folders and files combined  
7
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
Before you start  
About WMA  
PC-created disc compatibility  
Discs recorded using a personal computer  
may not be playable in this unit due to the  
setting of the application software used to  
create the disc. In these particular instances,  
check with the software publisher for more  
detailed information.  
Discs recorded in packet write mode (UDF  
format) are not compatible with this player.  
Check the DVD-R/RW or CD-R/RW software  
disc boxes for additional compatibility  
information.  
®
The Windows Media logo printed on the box  
indicates that this player can playback  
Windows Media Audio content.  
WMA is an acronym for Windows Media Audio  
andreferstoanaudiocompressiontechnology  
developed by Microsoft Corporation. WMA  
content can be encoded by using Windows  
®
®
Media Player version 7, 7.1, Windows Media  
®
®
Player for Windows XP, or Windows Media  
Player 9 Series.  
Microsoft, Windows Media, and the Windows  
logo are trademarks, or registered trademarks of  
Microsoft Corporation in the United States and/  
or other countries.  
JPEG file compatibility  
• Compatible formats: Baseline JPEG and  
EXIF 2.2* still image files up to a resultion  
of 3072 x 2048.  
*File format used by digital still cameras  
• Progressive JPEG compatible: No  
• File extensions: .jpg (must be used for the  
player to recognize JPEG files – do not use  
for other file types)  
• File structure: Up to 299 folders; up to 648  
folders and files combined  
8
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting up  
02  
CChoaptnern2 ecting up  
Easy connections  
The setup described here is a basic setup that allows you to play discs using just the cables  
supplied with the player. In this setup, stereo audio is played through the speakers in your TV.  
A/V IN  
TV  
AUDIO OUT  
DIGITAL AUDIO OUT  
OPTICAL  
PB  
Y
COAXIAL  
L
R
PR  
COMPONENT VIDEO OUT  
S
VIDEO OU
White  
Red  
Yellow  
To power  
outlet  
Important  
• This player is equipped with copy protection technology. Do not connect this player to your TV  
via a VCR using audio/video or S-video cables, as the picture from this player will not appear  
properly on your TV. (This player may also not be compatible with some combination TV/VCRs  
for the same reason; refer to the manufacturer for more information.)  
• When connecting to your TV as shown above, do not set the Component Out setting (see  
Video Output settings on page 33) to Progressive.  
9
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
Connecting up  
1
Connect the VIDEO OUT and AUDIO  
OUT L/R jacks to a set of A/V inputs on your  
TV.  
S-VIDEO  
IN  
Use the supplied audio/video cable,  
connecting the red and white plugs to the  
audio outputs and the yellow plug to the video  
output. Make sure you match up the left and  
right audio outputs with their corresponding  
inputs for correct stereo sound.  
TV  
AUDIO OUT  
DIGITAL AUDIO OUT  
OPTICAL  
P
B
Y
COAXIAL  
L
R
P
R
VIDEO OUT  
COMPONENT VIDEO OUT  
See below if you want to use a component or  
S-video cable for the video connection.  
2
Connect the supplied AC power cable to  
the AC IN inlet, then plug into a power  
outlet.  
Connecting using the  
component video output  
You can use the component video output  
instead of the standard video out jack to  
connect this player to your TV (or other  
equipment). This should give you the best  
quality picture from the three types of video  
output available.  
Note  
• Before unplugging the player from the  
power outlet, make sure you first switch it  
into standby using either the front panel ꢂ  
STANDBY/ON button, or the remote  
control, and wait of the -OFF- message to  
disappear from the player’s display.  
Use a component video cable (not  
supplied) to connect the COMPONENT  
VIDEO OUT jacks to a component video  
input on your TV, monitor or AV receiver.  
• For the above reasons, do not plug this  
player into a switched power supply found  
on some amplifiers and AV receivers.  
Connecting using the S-video  
output  
COMPONENT  
VIDEO IN  
TV  
If your TV (or other equipment) has an S-video  
(S1) input, you can use the S-video output on  
this player instead of the standard (composite)  
output for a better quality picture.  
AUDIO OUT  
DIGITAL AUDIO OUT  
OPTICAL  
P
B
Y
COAXIAL  
P
R
S
VIDEO OUT  
COMPONENT VIDEO OUT  
Use an S-video cable (not supplied) to  
connect the S-VIDEO OUT to an S-video  
input on your TV (or monitor or AV  
receiver).  
Line up the small triangle above the jack with  
the same mark on the plug before plugging in.  
10  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting up  
02  
Switching the video output to interlace  
using the front panel controls  
Switch the player to standby then, using the  
front panel controls, press STANDBY/ON  
while pressing to switch the player back to  
Interlace.  
Watching progressive scan video  
from the component video outputs  
This player can output progressive scan video  
from the component video output. Compared  
to interlace video, progressive scan video  
effectively doubles the scanning rate of the  
picture, resulting in a very stable, flicker-free  
image.  
STANDBY/ON  
To set up the player for use with a progressive  
scan TV, see Video Output settings on page 33.  
When the player is set to output progressive  
scan video, the PRGSVE indicator lights in the  
front panel display.  
MIC  
1
MIC  
2
VOLUME  
ECHO  
FL DIMMER  
STANDBY/ON  
MIN-MAX  
MIN-MAX  
Compatibility of this player with  
Important  
progressive-scan and high-definition TVs  
This player is compatible with progressive  
video Macro Vision System Copy Guard.  
• When Component Out (page 33) is set to  
Progressive, there is no video output from  
the VIDEO OUT (composite) and S (S-  
video) jacks.  
Consumers should note that not all high-  
definition television sets are fully compatible  
with this product and may cause artifacts to be  
displayed in the picture. In case of 525/625  
progressive scan picture problems, it is  
recommended that the user switch the  
connection to the ‘standard definition’ output  
(Interlace). If there are questions regarding our  
TV set compatibility with this model, please  
contact our customer service center.  
• If you want to display video on more than  
one monitor simultaneously, make sure  
the player is set to Interlace.  
• If you connect a TV that is not compatible  
with a progressive scan signal and switch  
the player to progressive, you will not be  
able to see any picture at all. In this case,  
switch everything off and reconnect using  
the supplied video cable (see Easy  
This player is compatible with the following  
Pioneer displays and monitors:  
connections on page 9), then switch back  
to Interlace (see below).  
Plasma display  
PDP-502MX, PDP-503HDG, PDP-433HDG,  
PDP-5040HD, PDP-4340HD, PDP-504HDG,  
PDP-434HDG  
Projection monitor receiver  
SD-532HD5, SD-533HD5  
11  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
Connecting up  
2
Connect the analog AUDIO OUT L/R and  
Connecting to an AV receiver  
VIDEO OUT jacks on this player to a set of  
analog audio and video inputs on your AV  
receiver.  
To enjoy multichannel surround sound you  
need to connect this player to an AV receiver  
using the digital audio output. This player has  
both coaxial and optical digital jacks; use  
whichever is convenient.You’ll probably also  
want to connect a video output to your AV  
receiver. You can use any of the video outputs  
available on this player (the illustration shows  
a standard (composite) connection).  
AV receiver  
AUDIO/  
VIDEO IN  
AUDIO OUT  
DIGITAL AUDIO OUT  
PB  
Y
1
Connect one of the DIGITAL AUDIO OUT  
OPTICAL  
COAXIAL  
L
jacks on this player to a digital input on  
your AV receiver.  
R
PR  
S
VIDEO OUT  
COMPONENT VIDEO OUT  
This enables you to listen to multichannel  
surround sound.  
For an optical connection, use an optical cable  
(not supplied) to connect the OPTICAL  
DIGITAL AUDIO OUT jack to an optical input  
on your AV receiver.  
Tip  
• To use the karaoke function you must have  
this player connected to your amplifier  
using the analog outputs.  
For a coaxial connection, use a coaxial cable  
(similar to the supplied video cable) to connect  
the COAXIAL DIGITAL AUDIO OUT jack to a  
coaxial input on your AV receiver.  
DIGITAL IN  
(OPTICAL)  
AV receiver  
DIGITAL IN  
(COAXIAL)  
AUDIO OUT  
DIGITAL AUDIO OUT  
OPTICAL  
P
B
Y
COAXIAL  
L
R
P
R
S
VIDEO OUT  
COMPONENT VIDEO OUT  
12  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and displays  
03  
CChaoptnert3rols and displays  
Front panel  
1
2
3
4
5
6
7
8
9
10  
TOP MENU  
MENU  
MIC  
1
MIC  
2
VOLUME  
ECHO  
ENTER  
HOME  
MENU  
FL DIMMER  
OPEN/CLOSE  
RETURN  
STANDBY/ON  
MIN-MAX  
MIN-MAX  
17  
16  
15  
14 13  
12  
11  
1
2
3
STANDBY/ON (page 15)  
16 and (page 18)  
RW Compatible (page 7)  
17 Karaoke controls (page 19)  
MIC input jacks  
DIMMER Press to change the brightness  
of the front panel display.  
VOLUME control  
4
5
6
7
8
9
Disc tray  
ECHO control  
OPEN/CLOSE (page 17)  
(page 17)  
(page 17)  
TOP MENU (page 18)  
ENTER & cursor buttons (page 15)  
10 MENU (page 18)  
11 RETURN (page 15)  
12 HOME MENU (page 15)  
13 (page 17)  
14 Remote control sensor (page 14)  
15 Display  
13  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
03  
Controls and displays  
Remote control  
10 (page 18)  
11 (page 17)  
12 LOW () (page 19)  
13 HIGH () (page 19)  
14 OPEN/CLOSE (page 17)  
15 ANGLE (page 29)  
16 CLEAR  
STANDBY/ON  
OPEN/CLOSE  
1
2
4
14  
15  
16  
17  
AUDIO  
SUBTITLE  
ANGLE  
CLEAR  
ENTER  
3
2
3
6
9
1
4
5
8
17 ENTER (page 15)  
18 MENU (page 18)  
19 RETURN (page 15)  
20 and ꢏ/ꢐ (page 17, 22)  
21 (page 18)  
0
7
TOP MENU  
MENU  
18  
5
6
ENTER  
HOME  
MENU  
RETURN  
22 (page 17)  
7
8
19  
20  
ꢊ/ꢋ  
ꢐ/ꢏ  
23 DISPLAY (page 29)  
24 ZOOM (page 29)  
9
21  
10  
22  
11  
KEY CONTROL  
ZOOM  
DISPLAY  
12  
13  
23  
24  
Using the remote control  
Keep in mind the following when using the  
remote control:  
• Make sure that there are no obstacles  
between the remote and the remote sensor  
on the unit.  
• The remote has a range of about 7m.  
1
STANDBY/ON (page 15)  
AUDIO (page 28)  
• Remote operation may become unreliable  
if strong sunlight or fluorescent light is  
shining on the unit’s remote sensor.  
2
3
4
5
6
7
8
9
SUBTITLE (page 28)  
• Remote controllers for different devices  
can interfere with each other. Avoid using  
remotes for other equipment located close  
to this unit.  
Number buttons (page 17)  
TOP MENU (page 18)  
ENTER & cursor buttons (page 15)  
HOME MENU (page 15)  
and ꢊ/ꢋ (page 17, 22)  
(page 17)  
• Replace the batteries when you notice a  
fall off in the operating range of the remote.  
14  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
04  
Chapter 4  
Getting started  
Switching on  
Using the on-screen displays  
After making sure that everything is connected  
properly and that the player is plugged in,  
press STANDBY/ON on the front panel or  
remote control to switch the player on.  
For ease of use, this player makes extensive  
use of graphical on-screen displays (OSDs).  
All the screens are navigated in basically the  
same way, using the cursor buttons (ꢀ/ꢁ/ꢂ/  
) to change the highlighted item and  
pressing ENTER to select it.  
Also, switch on your TV and make sure that it is  
set to the input you connected the DVD player  
to.  
ENTER  
STANDBY/ON  
MIC  
1
MIC  
2
VOLUME  
ECHO  
ENTER  
FL DIMMER  
STANDBY/ON  
HOME  
GMUEINDUE  
RETURN  
MIN-MAX  
MIN-MAX  
FAQ  
TOP MENU  
MENU  
ENTER  
HOME  
MENU  
OPEN/CLOSE  
RETURN  
• My DVD player switches on but there is  
nothing displayed on my TV.  
Make sure that the TV is set to the correct  
video input (not a TV channel). For  
example, if you connected this player to the  
VIDEO 1 inputs on your TV, switch your TV  
to VIDEO 1.  
Button  
What it does  
Display/exit the on-screen display.  
HOME  
MENU  
ꢀ/ꢁ/ꢂ/ꢃ Changes the highlighted menu  
Note  
item.  
• This player features a screen saver and an  
auto power off function. If the player is  
stopped and no button is pressed for  
around five minutes, the screen saver  
starts. If the disc tray is closed but no disc  
is playing and no control is pressed for  
about 30 minutes, the player automatically  
goes into standby.  
Selects the highlighted menu  
item (both ENTER buttons on the  
remote work in exactly the same  
way).  
ENTER  
RETURN  
Returns to the main menu  
without saving changes.  
15  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Getting started  
Setting the language of this  
player’s on-screen displays  
Note  
• From here on in this manual, the word  
‘select’ generally means use the cursor  
buttons to highlight an item on-screen,  
then press ENTER.  
This sets the language of the player’s on-  
screen displays.  
1
Press HOME MENU and select ‘Initial  
Settings’.  
Setting up the player for your  
TV  
Initial Settings  
If you have a widescreen (16:9) TV, you should  
setup the player so that the picture will be  
presented correctly. If you have a conventional  
(4:3) TV, you can leave the player on the default  
setting and move on to the next section.  
2
Select ‘OSD Language’ from the  
‘Display’ settings.  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
OSD Language  
Angle Indicator  
English  
Français  
Español  
1
Press HOME MENU and select ‘Initial  
Display  
Settings’.  
Options  
Initial Settings  
3
Select a language.  
2
Select ‘TV Screen’ from the ‘Video  
The on-screen language will change according  
to your selection.  
Output’ settings.  
Initial Settings  
4
Press HOME MENU to exit the menu  
screen.  
Digital Audio Out  
Video Output  
Language  
4:3 (Letter Box)  
4:3 (Pan&Scan)  
16:9 (Wide)  
TV Screen  
Component Out  
Display  
Options  
Playing discs  
The basic playback controls for playing DVD,  
CD, Video CD/Super VCD and MP3/WMA discs  
are covered here. Further functions are  
detailed in the next chapter.  
3
If you have a widescreen (16:9) TV,  
select ‘16:9 (Wide)’.  
If you have a conventional (4:3) TV, you can  
change the setting from 4:3 (Letter Box) to 4:3  
(Pan & Scan) if you prefer. See Video Output  
settings on page 33 for more details.  
For details on playing JPEG picture discs, see  
Viewing a JPEG slideshow on page 23.  
4
Press HOME MENU to exit the menu  
screen.  
16  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
04  
4
Press (play) to start playback.  
If you’re playing a DVD or Video CD/Super VCD,  
an on-screen menu may appear. See DVD disc  
menus on page 18 and Video CD/Super VCD  
PBC menus on page 19 for more on how to  
navigate these.  
STANDBY/ON  
OPEN/CLOSE  
2
5
8
3
6
9
1
4
7
• If you’re playing an MP3/WMA disc, it may  
take a few seconds before playback starts.  
ENTER  
0
Note  
ENTER  
• You may find with some DVD discs that  
some playback controls don’t work in  
certain parts of the disc. This is not a  
malfunction.  
ꢊ/ꢋ  
ꢐ/ꢏ  
Basic playback controls  
The table below shows the basic controls on  
the remote for playing discs. The following  
chapter covers other playback features in more  
detail.  
1
If the player isn’t already on, press  
STANDBY/ON to switch it on.  
Button  
What it does  
If you’re playing a DVD or Video CD/Super VCD,  
also turn on your TV and make sure that it is set  
to the correct video input.  
Starts playback.  
If the display shows RESUME or  
LAST MEM playback starts from  
the resume or last memory point  
(see also Resume and Last Memory  
on page 18.)  
2
Press OPEN/CLOSE to open the disc  
tray.  
3
Load a disc.  
Pauses a disc that’s playing, or  
restarts a paused disc.  
Load a disc with the label side facing up, using  
the disc tray guide to align the disc (if you’re  
loading a double-sided DVD disc, load it with  
the side you want to play face down).  
Stops playback.  
See also Resume and Last Memory  
on page 18.  
(remote  
only)  
Press to start fast reverse scanning.  
Press (play) to resume normal  
playback.  
(remote  
only)  
Press to start fast forward scanning.  
Press (play) to resume normal  
playback.  
17  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Getting started  
DVD disc menus  
Button  
What it does  
Many DVD-Video discs feature menus from  
which you can select what you want to watch.  
They may also give access to additional  
features, such as subtitle and audio language  
selection, or special features such as  
slideshows. See the disc packaging for details.  
Skips to the start of the current  
track or chapter, then to previous  
tracks/chapters.  
Skips to the next track or chapter.  
Numbers Use to enter a title/chapter/track  
(remote  
only)  
Sometimes DVD-Video menus are displayed  
automatically when you start playback; others  
only appear when you press MENU or TOP  
MENU.  
number. Press ENTER to select.  
• If the disc is stopped, playback  
starts from the selected title (for  
DVD) or track (for CD/Video CD/  
Super VCD).  
• If the disc is playing, playback  
jumps to the start of the selected  
title (VR mode DVD-RW), chapter  
(DVD-Video) or track (CD/Video CD).  
2
5
8
3
6
9
1
4
ENTER  
0
7
TOP MENU  
MENU  
ENTER  
Resume and Last Memory  
RETURN  
When you stop playback of a disc, RESUME is  
shown in the display indicating that you can  
resume playback again from that point.  
If the disc tray is not opened, the next time you  
start playback the display shows RESUME and  
playback resumes from the resume point. (If  
you want to clear the resume point, press ꢆ  
(stop) while RESUME is displayed.)  
Button  
What it does  
TOP MENU Displays the ‘top menu’ of a DVD  
disc—this varies with the disc.  
MENU  
Displays a DVD disc menu—this  
varies with the disc and may be  
the same as the ‘top menu’.  
With DVDs and Video CD/ Super VCDs, if you  
take the disc out of the player after stopping  
playback, the last play position is stored in  
memory. If the next disc you load is the same  
one, the display shows LAST MEM and  
playback will resume.  
ꢀ/ꢁ/ꢂ/ꢃ Moves the cursor around the  
screen.  
ENTER  
Selects the current menu option.  
RETURN  
Returns to the previously dis-  
played menu screen.  
Note  
• The Last Memory function doesn’t work  
with VR format DVD-RW discs.  
Numbers  
(remote  
only)  
Highlights a numbered menu  
option (some discs only). Press  
ENTER to select.  
• If you don’t need the Last Memory function  
when you stop a disc, you can press ꢃ  
OPEN/CLOSE to stop playback and open  
the disc tray.  
18  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
04  
Video CD/Super VCD PBC menus  
Some Video CD/Super VCDs have menus from  
which you can choose what you want to watch.  
These are called PBC (Playback control)  
menus.  
Singing Your Favorite Songs  
Along with Karaoke Discs  
This player has a karaoke feature that lets you  
sing along with your favorite songs, featuring  
(a) microphone(s) jack conveniently located on  
the front panel as well as controls for mixing  
the vocal level and amount of echo effect.  
You can play a PBC Video CD/Super VCD  
without having to navigate the PBC menu by  
starting playback using a number button to  
select a track, rather than the (play) button.  
To use the karaoke function you must have this  
player connected to your TV or amplifier using  
the analog outputs. See also (page 9, 12).  
1
4
7
2
5
8
3
6
9
ENTER  
MIC input jacks  
0
MIC  
1
MIC  
2
VOLUME  
ECHO  
FL DIMMER  
STANDBY/ON  
MIN-MAX  
MIN-MAX  
ENTER  
RETURN  
ECHO  
VOLUME  
KEY CONTROL  
Button  
What it does  
RETURN  
Displays the PBC menu.  
Numbers  
(remote  
only)  
Use to enter a numbered menu  
option. Press ENTER to select.  
1
Turn both VOLUME and ECHO counter-  
clockwise to the minimum level.  
To avoid possible damage to your speakers, be  
sure to turn down the volume completely  
before preceeding to step 2.  
Displays the previous menu page  
(if there is one).  
Displays the next menu page (if  
there is one).  
19  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Getting started  
2
Connect (a) microphone(s) (not  
Note  
supplied) to the MIC input jack.  
• You can adjust the HIGH tone in a range of  
five steps and the LOW tone in a range of  
five steps.  
Make sure that the plug of the microphone is  
inserted firmly and completely into the jack.  
• If the microphone level is too high, the  
sound may distort. In this case, lower the  
volume.  
MIC  
1
MIC  
2
VOLUME  
ECHO  
FL DIMMER  
OPEN/CLOSE  
STANDBY/ON  
MIN-MAX  
MIN-MAX  
When “howling” occurs  
If sound from the speakers is picked up by a  
mic and output again through the speakers,  
the result is a screeching sound known as  
“howling”.  
3
use.  
Load a disc with the music you want to  
To eliminate howling:  
4
Play the title, chapter or track and  
• Point the mic away from the speakers.  
• Move the mic away from the speakers.  
adjust the volume of the audio playback.  
• For more information on loading a disc and  
playing back a title, chapter or track, refer  
to the section Playing discs on page 22.  
• Turn VOLUME counterclockwise to lower  
the volume level.  
• Adjust the volume on the TV or component  
that audio connections are made to.  
VOLUME on the front panel controls only  
the level of the microphone(s).  
• Turn ECHO counterclockwise to lower the  
echo effect.  
Note  
5
When the music starts, turn VOLUME  
• Reduce the volume when plugging in the  
microphone to prevent feedback.  
clockwise while speaking or singing into  
the microphone to adjust the vocal volume  
to an appropriate level.  
6
Turn ECHO clockwise to adjust the  
amount of echo effect that you want  
added to the vocals.  
The amount of echo effect needed may differ  
for different styles of music and for different  
preferences.  
7
Adjusting the music to suit your voice  
Use the key control on the remote control to  
match the backing music to your vocal range.  
• Press (HIGH) repeatedly to raise the  
pitch of the backing music.  
• Press (LOW) repeatedly to lower the  
pitch of the backing music.  
20  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
04  
FAQ  
• After I load a DVD disc, it ejects  
automatically after a few seconds!  
Most likely, the disc is the wrong region for  
your player. The region number should be  
printed on the disc; check it against the  
region number of the player (which you can  
find on the rear panel). See also DVD-Video  
regions on page 39.  
If the region number is OK, it may be that  
the disc is damaged or dirty. Clean the disc  
and look for signs of damage. See also  
Taking care of your player and discs on  
page 36.  
• Why won’t the disc I loaded play?  
First check that you loaded the disc the  
right way up (label side up), and that it’s  
clean and undamaged. See Taking care of  
your player and discs on page 36 for  
information on cleaning discs.  
If a disc loaded correctly won’t play, it’s  
probably an incompatible format or disc  
type, such as DVD-ROM. See Disc/content  
format playback compatibility on page 7 for  
more on disc compatibility.  
• I have a widescreen TV so why are there  
black bars at the top and bottom of the  
screen when I play some discs?  
Some movie formats are such that even  
when played on a widescreen TV, black  
bars are necessary at the top and bottom of  
the screen. This is not a malfunction.  
• I have a standard (4:3) TV and set the player  
to show widescreen DVDs in pan & scan  
format, so why do I still get black bars top  
and bottom with some discs?  
Some discs override the display  
preferences of the player, so even if you  
have 4:3 (Pan & Scan) selected, those  
discs will still be shown in letter box format.  
This is not a malfunction.  
21  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
Playing discs  
CPhlaapteyr i5ng discs  
Playing in slow motion  
Note  
You can play DVDs at four different slow  
motion speeds, forwards and backwards.  
Video CD/Super VCDs can be played at four  
different forward slow motion speeds.  
• Many of the functions covered in this  
chapter apply to DVD discs, Video CDs/  
Super VCDs, CDs and WMA/MP3 JPEG  
discs, although the exact operation of  
some varies slightly with the kind of disc  
loaded.  
1
During playback, press (pause).  
2
Press and hold ꢊ/ꢋ or ꢐ/ꢏ until  
• Some DVDs restrict the use of some  
functions (random or repeat, for example)  
in some or all parts of the disc. This is not a  
malfunction.  
slow motion playback starts.  
• The slow motion speed is shown on-  
screen.  
• There is no sound during slow motion  
playback.  
• When playing Video CD/Super VCDs, some  
of the functions are not available during  
PBC playback. If you want to use them,  
start the disc playing using a number  
button to select a track.  
3
Press repeatedly to change the slow  
motion speed.  
4
To resume normal playback, press ꢅ  
(play).  
• Depending on the disc, normal playback  
may automatically resume when a new  
chapter is reached.  
Scanning discs  
You can fast-scan discs forward or backward at  
four different speeds.  
1
During playback, press or to  
Frame advance/frame reverse  
start scanning.  
You can advance or back up DVD discs frame-  
by-frame. With Video CD/Super VCDs you can  
only use frame advance.  
• There is no sound while scanning DVDs  
and Video CD/Super VCDs.  
2
Press repeatedly to increase the  
1
During playback, press (pause).  
scanning speed.  
• The scanning speed is shown on-screen.  
2
Press ꢊ/ꢋ or ꢐ/ꢏ to reverse or  
advance a frame at a time.  
3
To resume normal playback, press ꢅ  
(play).  
3
To resume normal playback, press ꢅ  
• When scanning a Video CD/Super VCD  
playing in PBC mode or a WMA/MP3 track,  
playback automatically resumes at the end  
or beginning of the track.  
(play).  
• Depending on the disc, normal playback  
may automatically resume when a new  
chapter is reached.  
• Depending on the disc, normal playback  
may automatically resume when a new  
chapter is reached on a DVD disc.  
22  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
05  
Viewing a JPEG slideshow  
Browsing video content with  
the Disc Navigator  
After loading a CD/CD-R/RW containing JPEG  
picture files, press (play) to start a slideshow  
from the first folder/picture on the disc. The  
player displays the pictures in each folder in  
alphabetical order.  
Use the Disc Navigator to browse through the  
contents of a DVD or Video CD/Super VCD disc  
to find the part you want to play.  
Pictures are automatically adjusted so that  
they fill as much of the screen as possible (if  
the aspect ratio of the picture is different to  
your TV screen you may notice black bars at the  
sides, or at the top and bottom of the screen).  
Important  
• You can’t use the Disc Navigator with  
Video CD/Super VCDs in PBC mode.  
1
During playback, press HOME MENU  
and select ‘Disc Navigator’ from the on-  
screen menu.  
While the slideshow is running:  
Button  
What it does  
Disc Navigator  
Pauses the slideshow; press again to  
restart.  
2
Select a view option.  
Displays the previous picture.  
Displays the next picture.  
Disc Navigator  
Title  
Chapter  
Pauses the slideshow and rotates the  
displayed picture 90º (counter)  
clockwise. (Press (play) to restart  
slideshow).  
ꢂ/ꢃ  
The options available depend on the kind of  
disc loaded and whether the disc is playing or  
not, but include:  
Pauses the slideshow and flips the  
displayed picture horizontally or  
vertically. (Press (play) to restart  
slideshow.)  
ꢀ/ꢁ  
Title – Titles from a DVD-Video disc.  
Chapter – Chapters from the current title  
of a DVD-Video disc.  
Track – Tracks from a Video CD/Super VCD  
disc.  
ZOOM  
MENU  
Pauses the slideshow and zooms the  
picture. Press again to toggle  
between 1x, 2x and 4x zoom. (Press  
(play) to restart slideshow).  
Time – Thumbnails from a Video CD/Super  
VCD disc at 10 minute intervals.  
Original: Title – Original titles from a VR  
mode DVD-RW disc.  
Displays the Disc Navigator screen  
(see below).  
Playlist: Title – Playlist titles from a VR  
mode DVD-RW disc.  
Note  
Original: Time – Thumbnails from the  
• The time it takes for the player to load a file  
increases with large file sizes.  
Original content at 10 minute intervals.  
Playlist: Time – Thumbnails from the  
• Discs can contain up to 299 folders and up  
to 648 folders and files combined.  
Playlist at 10 minute intervals.  
23  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
Playing discs  
The screen shows up to six moving thumbnail  
images displayed one after another. To display  
the previous/next six thumbnails, press /  
(you don’t have to wait for all the  
thumbnails to finish playing to display the  
previous/next page).  
1
Press HOME MENU and select ‘Disc  
Navigator’ from the on-screen menu.  
00:00/ 00:00  
0kbps  
Folder1  
Folder2  
Folder3  
Folder4  
3
Select the thumbnail image for what  
you want to play.  
01  
04  
02  
03  
06  
2
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ)  
and ENTER to navigate.  
05  
Use the cursor up/down buttons (ꢀ/ꢁ) to  
move up and down the folder/file list.  
Use the cursor left button () to return to the  
parent folder.  
Disc Navigator: Title  
01- 49: --  
Use ENTER or cursor right () to open a  
You can use either the cursor buttons (ꢀ/ꢁ/  
ꢂ/ꢃ) and ENTER to select a thumbnail, or the  
number buttons.  
highlighted folder.  
• You can also return to the parent folder by  
going to the top of the list to the ‘..’ folder,  
then pressing ENTER.  
To select using the number buttons, enter a  
two-digit number then press ENTER.  
• When a JPEG file is highlighted, a  
thumbnail image is displayed on the right.  
Tip  
00:00/ 00:00  
Folder2  
0kbps  
• Another way to find a particular place on a  
disc is to use one of the search modes. See  
Searching a disc on page 28.  
File1  
File2  
File3  
File4  
File5  
Browsing WMA, MP3 and JPEG  
files with the Disc Navigator  
Use the Disc Navigator to find a particular file  
or folder by filename.  
3
To play the highlighted track or display  
the highlighted JPEG file, press ENTER.  
• When a WMA/MP3 file is selected,  
playback begins, starting with the selected  
track, and continues until the end of the  
folder.  
• When a JPEG file is selected, a slideshow  
begins, starting with that file, and  
continues to the end of the folder.  
24  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
05  
Using repeat play  
Tip  
There are various repeat play options,  
depending on the kind of disc loaded. It’s also  
possible to use repeat play together with  
program play to repeat the tracks/chapters in  
the program list (see Creating a program list on  
page 27).  
• To play the contents of the whole disc  
rather than just the current folder, exit the  
Disc Navigator and start playback using  
the (play) button.  
Looping a section of a disc  
The A-B Repeat function allows you to specify  
two points (A and B) within a track (CD, Video  
CD/Super VCD) or title (DVD) that form a loop  
which is played over and over.  
Important  
• You can’t use Repeat play with Video CD/  
Super VCDs in PBC mode, or with WMA/  
MP3 discs.  
• You can’t use A-B Repeat with Video CD/  
Super VCDs in PBC mode, or WMA/MP3  
files.  
• You can’t use repeat and random play at  
the same time.  
1
During playback, press HOME MENU  
and select ‘PLAY MODE’ from the on-screen  
menu.  
1
During playback, press HOME MENU  
and select ‘PLAY MODE’ from the on-screen  
menu.  
2
Select ‘Repeat’ from the list of functions  
2
Select ‘A-B Repeat’ from the list of func-  
on the left.  
tions on the left.  
Play Mode  
Play Mode  
A-B Repeat  
Repeat  
Title Repeat  
Chapter Repeat  
Repeat Off  
A-B Repeat  
Repeat  
A(Start Point)  
B(End Point)  
Off  
Random  
Random  
Program  
Program  
Search Mode  
Search Mode  
3
Select a repeat play option.  
3
Press ENTER on ‘A(Start Point)’ to set  
If program play is active, select Program  
Repeat to repeat the program list, or Repeat  
Off to cancel.  
the loop start point.  
4
Press ENTER on ‘B(End Point)’ to set the  
loop end point.  
After pressing ENTER, playback jumps back to  
the start point and plays the loop.  
The repeat options available depend on the  
kind of disc loaded. For example, for DVD  
discs, you can select Title Repeat or Chapter  
Repeat (or Repeat Off).  
5
To resume normal playback, select ‘Off’  
from the menu.  
Play Mode  
A-B Repeat  
Repeat  
Title Repeat  
Chapter Repeat  
Repeat Off  
Random  
Program  
Search Mode  
25  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
Playing discs  
• For CDs and Video CDs, select Disc  
Repeat or Track Repeat (or Repeat Off).  
3
Select a random play option.  
The random play options available depend on  
the kind of disc loaded. For example, for DVD  
discs, you can select Random Title or  
Random Chapter, (or Random Off).  
Using random play  
Use the random play function to play titles or  
chapters (DVD-Video), or tracks (CD, Video CD/  
Super VCD) at random. (Note that the same  
track/title/chapter may play more than once.)  
Play Mode  
A-B Repeat  
Repeat  
Random Title  
Random Chapter  
Random Off  
Random  
Program  
You can set the random play option when a  
disc is playing or stopped.  
Search Mode  
Important  
• For CDs and Video CD/Super VCDs, select  
On or Off to switch random play on or off.  
• Random play remains in effect until you  
select Random Off from the random play  
menu options.  
Tip  
• You can’t use random play with VR format  
DVD-RW discs, Video CD/Super VCDs  
playing in PBC mode, WMA/MP3 discs, or  
while a DVD disc menu is being displayed.  
• Use the following controls during random  
play:  
Button  
What it does  
• You can't use random play together with  
program or repeat play.  
Selects a new track/title/chapter  
at random.  
1
During playback, press HOME MENU  
Returns to the beginning of the  
current track/title/chapter;  
further presses select another  
random track/title/chapter.  
and select ‘PLAY MODE’ from the on-screen  
menu.  
2
Select ‘Random’ from the list of func-  
tions on the left.  
Play Mode  
A-B Repeat  
Repeat  
Random Title  
Random Chapter  
Random Off  
Random  
Program  
Search Mode  
26  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
05  
After pressing ENTER to select the title/  
chapter/track, the step number automatically  
moves down one.  
Creating a program list  
This feature lets you program the play order of  
titles/chapters/tracks on a disc.  
5
Repeat step 3 to build up a program list.  
A program list can contain up to 24 titles/  
Important  
chapters/tracks.  
• You can’t use Program play with VR format  
DVD-RW discs, Video CD/Super VCDs  
playing in PBC mode, WMA/MP3 discs, or  
while a DVD disc menu is being displayed.  
• You can insert steps into the middle of a  
program list by just highlighting the  
position where you want the new step to  
appear and entering a title/chapter/track  
number.  
1
During playback, press HOME MENU  
and select ‘PLAY MODE’ from the on-screen  
menu.  
• To delete a step, highlight it and press  
CLEAR.  
2
Select ‘Program’ from the list of func-  
6
To play the program list, press (play).  
tions on the left.  
Program play remains active until you turn off  
program play (see below), erase the program  
list (see below), eject the disc or switch off the  
player.  
Play Mode  
A-B Repeat  
Repeat  
Random  
Create/Edit  
Playback Start  
Playback Stop  
Program Delete  
Program  
Search Mode  
Tip  
• Use the following controls during program  
play:  
3
Select ‘Create/Edit’ from the list of  
program options.  
Button  
What it does  
4
Use the cursor buttons and ENTER to  
HOME  
MENU  
Save the program list and exit  
the program edit screen without  
starting playback.  
select a title, chapter or track for the  
current step in the program list.  
For a DVD disc, you can add a title or a chapter  
to the program list.  
Skip to the next step in the  
program list.  
Program  
Program Step  
Title 1~38  
Chapter 1~4  
01. 01  
02.  
Title 01  
Title 02  
Title 03  
Title 04  
Title 05  
Title 06  
Title 07  
Title 08  
Chapter 001  
Chapter 002  
Chapter 003  
Chapter 004  
Other functions available from the  
program menu  
There are a number of other options in the  
program menu in addition to Create/Edit.  
03.  
04.  
05.  
06.  
07.  
08.  
Playback Start – Starts playback of a  
saved program list  
• For a CD or Video CD/Super VCD, select a  
track to add to the program list.  
Playback Stop – Turns off program play,  
but does not erase the program list  
27  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
Playing discs  
Program Delete – Erases the program list  
5
Press ENTER to start playback.  
and turns off program play  
Switching subtitles  
Searching a disc  
Some DVD discs have subtitles in one or more  
languages; the disc box will usually tell you  
which subtitle languages are available. You  
can switch subtitle language during playback.  
You can search DVD discs by title or chapter  
number, or by time; CDs and Video CD/Super  
VCDs by track number or time.  
1
Press SUBTITLE repeatedly to select a  
subtitle option.  
Important  
• Search functions are not available with  
Video CD/Super VCDs in PBC mode, or  
with WMA/MP3 discs.  
Current / Total  
1/2  
Subtitle  
English  
1
During playback, press HOME MENU  
Note  
and select ‘PLAY MODE’ from the on-screen  
menu.  
• Some discs only allow you to change  
subtitle language from the disc menu.  
Press TOP MENU or MENU to access.  
2
Select ‘Search Mode’ from the list of  
functions on the left.  
• To set subtitle preferences, see Language  
settings on page 33.  
3
Select a search mode.  
The search options available depend on the  
kind of disc loaded.  
Switching audio language/  
channels  
• The disc must be playing in order to use  
time search.  
When playing a DVD disc recorded with dialog  
in two or more languages, you can switch  
audio language during playback.  
4
Use the number buttons to enter a title,  
chapter or track number, or a time.  
When playing a VR format DVD-RW disc  
recorded with dual-mono audio, you can  
switch between the main, sub, and mixed  
channels during playback.  
Play Mode  
A-B Repeat  
Repeat  
Title Search  
Input Chapter  
Chapter Search  
Time Search  
0
0
1
Random  
Program  
Search Mode  
When playing a Video CD/Super VCD, you can  
switch between stereo, just the left channel or  
just the right channel.  
• For a time search, enter the number of  
minutes and seconds into the currently  
playing title (DVD) or track (CD/Video CD/  
Super VCD) you want playback to resume  
from. For example, press 4, 5, 0, 0 to have  
playback start from 45 minutes into the  
disc. For 1 hour, 20 minutes and 30  
seconds, press 8, 0, 3, 0.  
1
Press AUDIO repeatedly to select an  
audio language/channel option.  
The language/channel information is shown  
on-screen.  
28  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
05  
Displaying disc information  
Note  
Various track, chapter and title information,  
such as the elapsed and remaining playing  
time can be displayed on-screen while a disc is  
playing.  
• Some DVD discs only allow you to change  
audio language from the disc menu. Press  
TOP MENU or MENU to access.  
• To set DVD audio language preferences,  
see Language settings on page 33.  
1
To show/switch/hide the information  
displayed, press DISPLAY repeatedly.  
• When a disc is playing, the information  
appears at the top of the screen.  
Zooming the screen  
Using the zoom feature you can magnify a part  
of the screen by a factor of 2 or 4, while  
watching a DVD or Video CD/Super VCD or  
playing a JPEG disc.  
1
During playback, use the ZOOM button  
to select the zoom factor (Normal, 2x or  
4x).  
• Since DVD, Video CD/Super VCD and JPEG  
pictures have a fixed resolution, picture  
quality will deteriorate, especially at 4x  
zoom. This is not a malfunction.  
2
Use the cursor buttons to change the  
zoomed area.  
You can change the zoom factor and the  
zoomed area freely during playback.  
• If the navigation square at the top of the  
screen disappears, press ZOOM again to  
display it.  
Switching camera angles  
Some DVD discs feature scenes shot from two  
or more angles—check the disc box for details.  
When a multi-angle scene is playing, a  
icon appears on screen to let you know that  
other angles are available (this can be  
switched off if you prefer—see Display settings  
on page 34).  
1
During playback (or when paused),  
press ANGLE to switch angle.  
29  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
06  
Audio Settings and Video Adjust menus  
Chapter 6  
Audio Settings and Video  
Adjust menus  
Audio Settings menu  
Note  
The Audio Settings menu offers features for  
• Audio DRC is only effective with Dolby  
Digital audio sources.  
adjusting the way discs sound.  
1
Press HOME MENU and select ‘Audio  
• Audio DRC is only effective through the  
digital output when Digital Out is set to  
On, and Dolby Digital Out is set to Dolby  
Digital > PCM (see Digital Audio Out  
settings on page 32).  
Settings’ from the on-screen display.  
Audio Settings  
2
Select and change settings using the ꢀ/  
• The effect of Audio DRC also depends on  
your speakers and AV receiver settings.  
ꢁ/ꢂ/ꢃ (cursor) buttons, and ENTER.  
Audio Settings  
Equalizer  
On  
Off  
Virtual Surround  
• Settings: On, Off (default)  
Virtual Surround  
Audio DRC  
Dialog  
Switch on Virtual Surround to enjoy realistic  
surround sound effects from just two speakers.  
Note  
Audio DRC  
• Virtual Surround doesn’t work with DTS,  
through either the analog or digital  
outputs.  
• Settings: High, Medium, Low, Off  
(default)  
When watching Dolby Digital DVDs at low  
volume, it’s easy to lose the quieter sounds  
completely—including some of the dialog.  
Switching Audio DRC (Dynamic Range  
Control) to on can help by bringing up the  
quieter sounds, while controlling loud peaks.  
• 96kHz Linear PCM audio is automatically  
downsampled to 48kHz if Virtual Surround  
is switched on.  
• If the player is outputting Dolby Digital,  
DTS or MPEG bitstream audio (in other  
words, no conversion to PCM), Virtual  
Surround has no effect on the audio from  
the digital output. See Digital Audio Out  
settings on page 32 for how to set up the  
digital output formats.  
How much of a difference you hear depends on  
the material you’re listening to. If the material  
doesn’t have wide variations in volume, you  
may not notice much change.  
• How good the surround effect is varies with  
the disc.  
30  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Settings and Video Adjust menus  
06  
Brightness – Adjusts the overall  
brightness (–20 to +20).  
Dialog  
• Settings: High, Medium, Low, Off  
(default)  
Contrast – Adjusts the contrast between  
light and dark (–16 to +16).  
The Dialog feature is designed to make the  
dialog stand out from other background  
sounds in the soundtrack.  
Gamma – Adjusts the ‘warmth’ of the  
picture (High, Medium, Low, Off  
(default)).  
Hue – Adjusts the red/green balance  
(Green 9 to Red 9).  
Equalizer  
• Settings: Rock, Pop, Live, Dance, Techno,  
Classic, Soft, Off (default)  
Chroma Level – Adjusts how saturated  
colors appear (–9 to +9).  
The various preset EQ curves are designed to  
suit various styles of music.  
Adjust the Brightness, Contrast, Hue and  
Chroma Level settings using the ꢂ/ꢃ (cursor  
left/right) buttons.  
Note  
Brightness  
min  
max  
0
• 96kHz linear PCM audio is automatically  
downsampled to 48kHz if the Equalizer is  
switched on.  
3
Press ENTER to return to the Video  
Adjust screen, or HOME MENU to exit.  
Video Adjust menu  
From the Video Adjust screen you can adjust  
various settings that affect how the picture is  
presented.  
1
Press HOME MENU and select ‘Video  
Adjust’ from the on-screen display.  
Video Adjust  
2
Make settings using the  
ꢀ/ꢁ/ꢂ/ꢃ (cursor) buttons, and ENTER.  
Video Adjust  
Sharpness  
Brightness  
Contrast  
Gamma  
Hue  
Chroma Level  
Standard  
0
0
Off  
0
0
You can adjust the following picture quality  
settings:  
Sharpness – Adjusts the sharpness of  
edges in the picture (Fine, Standard  
(default), Soft).  
31  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
07  
Initial Settings menu  
Chapter 7  
Initial Settings menu  
Using the Initial Settings menu  
The Initial Settings menu provides audio and  
video output settings, parental lock settings,  
Note  
• In the table below, the default setting is  
and display settings, among others.  
shown in bold: other settings are shown in  
italics.  
If an option is grayed out it means that it  
cannot be changed at the current time. This is  
usually because a disc is playing. Stop the  
disc, then change the setting.  
• The Digital Audio Out settings only need to  
be set if you have connected the digital  
output of this player to an AV receiver, or  
other equipment.  
1
Press HOME MENU and select ‘Initial  
Settings’.  
• Check the operating instructions supplied  
with your other equipment to see which  
digital audio formats it’s compatible with.  
Initial Settings  
• Some settings, such as TV Screen, Audio  
Language and Subtitle Language may be  
overridden by the DVD disc. Often these  
settings can also be made from the DVD  
disc menu.  
2
Use the cursor buttons and ENTER to  
select the setting and option you want to  
set.  
All the settings and options are explained on  
the following pages.  
Digital Audio Out settings  
Setting  
Option  
What it means  
Digital audio is output from the digital outputs.  
No digital audio output.  
Digital Out  
On  
Off  
Dolby Digital encoded digital audio is output when playing a  
Dolby Digital DVD disc.  
Dolby Digital Out  
DTS Out  
Dolby Digital  
Dolby Digital audio is converted to PCM audio before being  
output.  
Dolby Digital > PCM  
DTS encoded digital audio is output when playing a DTS disc.  
(Noise will be output if your amplifier/receiver is not compatible  
with DTS audio.)  
DTS  
No digital audio is output when playing a DTS disc.  
96kHz digital audio is converted to 48kHz for digital output.  
96kHz digital audio is output as is at 96kHz.  
Off  
96 kHz PCM Out  
96kHz > 48kHz  
96kHz  
32  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu  
07  
Setting  
MPEG Out  
Option  
What it means  
MPEG encoded digital audio is converted to PCM audio for  
digital output.  
MPEG > PCM  
MPEG encoded digital audio is output as is.  
MPEG  
Video Output settings  
Setting  
Option  
What it means  
TV Screen  
Set if you have a conventional 4:3 TV. Widescreen movies are  
shown with black bars top and bottom.  
4:3 (Letter Box)  
(See also Screen sizes  
and disc formats on  
page 37.)  
Set if you have a conventional 4:3 TV. Widescreen movies are  
shown with the sides cropped so that the image fills the screen.  
4:3 (Pan & Scan)  
Set if you have a widescreen TV.  
16:9 (Wide)  
Interlace  
Set if your TV is not compatible with progressive scan video.  
Component Out  
Set if your TV is compatible with progressive scan video (see  
your TV’s instruction manual for details). See also Switching  
the video output to interlace using the front panel controls on  
page 11.  
Progressive  
Note that progressive scan video is only output from the  
component video jacks and that there is no output from the  
composite and S-video jacks when this setting is selected.  
Language settings  
Setting  
Option  
English  
What it means  
If there is an English soundtrack on the disc then it will be  
played.  
Audio Language  
If there is the language selected on the disc, then it will be  
played.  
Languages as displayed  
Other Language  
Select to choose a language other than the ones displayed (see  
page 39).  
If there is are English subtitles on the disc then they will be  
displayed.  
Subtitle Language English  
Languages as displayed  
If there is the subtitle language selected on the disc, then it will  
be displayed.  
Select to choose a language other than the ones displayed (see  
page 39).  
Other Language  
33  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
07  
Initial Settings menu  
Setting  
Option  
What it means  
DVD disc menus will be displayed in the same language as  
your selected subtitle language, if possible.  
DVD Menu Lan-  
guage  
w/Subtitle Lang.  
DVD disc menus will be displayed in the selected language, if  
possible.  
Languages as displayed  
Select to choose a language other than the ones displayed (see  
page 39).  
Other Language  
Subtitles are displayed according to your selected subtitle  
language (see above).  
Subtitle Display  
On  
Subtitles are always off by default when you play a DVD disc  
(note that some discs override this setting).  
Off  
Display settings  
Setting  
Option  
What it means  
On-screen displays of the player are in English.  
OSD Language  
English  
On-screen displays are shown in the language selected.  
Languages as displayed  
A camera icon is displayed on-screen during multi-angle  
scenes on a DVD disc.  
Angle Indicator  
On  
No multi-angle indication is shown.  
Off  
34  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu  
Parental Lock  
07  
1
2
Select ‘Password Change’.  
• Default level: Off; Default password: none;  
Use the number buttons to enter your  
Default Country code: us (2119)  
existing password, then press ENTER.  
To give you some control over what your  
children watch on your DVD player, some DVD-  
Video discs feature a Parental Lock level. If  
your player is set to a lower level than the disc,  
the disc won’t play.  
3
Enter a new password and press ENTER.  
This registers the new password and you will  
return to the Options menu screen.  
Setting/changing the Parental Lock  
Some discs also support the Country Code  
feature. The player does not play certain  
scenes on these discs, depending on the  
Country Code you set.  
1
Select ‘Level Change’.  
2
Use number buttons to enter your  
password, then press ENTER.  
Note  
3
Select a new level and press ENTER.  
• Press (cursor left) repeatedly to lock  
more levels (more discs will require the  
password); press (cursor right) to  
unlock levels. You can’t lock level 1.  
• Not all discs use Parental Lock, and will  
play without requiring the password first.  
• If you forget your password, you’ll need to  
reset the player to register a new password.  
(see Resetting the player on page 38)  
This sets the new level and you will return to the  
Options menu screen.  
Registering a new password  
You must register a password before you can  
change the Parental Lock level or enter a  
Country code.  
Setting/changing the Country code  
You can find the Country code list on page 40.  
1
Select ‘Country Code’.  
1
Select ‘Option’, then ‘Password’.  
2
Use number buttons to enter your  
2
Use the number buttons to enter a 4-  
password, then press ENTER.  
digit password.  
The numbers you enter show up as asterisks  
(*) on-screen.  
3
Select a Country code and press ENTER.  
There are two ways you can do this:  
• Select by code letter: Use ꢀ/ꢁ (cursor up/  
down) to change the Country code.  
3
Press ENTER to register the password.  
You will return to the Options menu screen.  
• Select by code number: Press (cursor  
right) then use the number buttons to enter  
the 4-digit Country code.  
Changing your password  
To change your password, confirm your  
existing password then enter a new one.  
The new Country code is set and you will return  
to the Options menu screen. Note that the new  
Country code doesn’t take effect until the next  
disc is loaded (or the current disc is reloaded).  
35  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
Additional information  
Chapter 8  
Additional information  
This player is designed to be used only with  
Taking care of your player and  
discs  
conventional, fully circular discs. Do not use  
shaped discs. Pioneer disclaims all liability  
arising in connection with the use of shaped  
discs.  
General  
Hold discs by the edge or by the center hole  
and edge.  
Cleaning discs  
Fingerprints and dist on discs can affect  
playback performance. Clean using a soft, dry  
cloth, wiping the disc lightly from the center to  
the outside edge as shown below.  
When you're not using a disc, return it to its  
case and store upright. Avoid leaving discs in  
excessively cold, humid, or hot environments  
(including under direct sunlight).  
Don't glue paper or put stickers on to discs. Do  
not use a pencil, ball-point pen or other sharp-  
tipped writing instrument to write on the disc.  
If necessary, use a cloth soaked in alcohol, or a  
commercially available CD/DVD cleaning kit to  
clean a disc more thoroughly. Never use  
benzine, thinner or other cleaning agents,  
including products designed for cleaning vinyl  
records.  
Don’t use self-adhesive disc labels on discs as  
these can cause the disc to warp slightly  
during playback causing distortion in the  
picture and/or sound.  
Damaged and shaped discs  
Do not use cracked, chipped, warped, or  
otherwise damaged discs as they may damage  
the player.  
Cleaning the unit’s exterior  
Unplug the unit before cleaning.  
Use a dry cloth to wipe off dust and dirt. If the  
surfaces are very dirty, wipe with a soft cloth  
dipped in some neutral cleanser diluted five or  
six times with water and wrung out well, then  
wipe again with a dry cloth.  
Do not use use furniture wax or cleaners.  
Never use thinners, benzine or insecticide  
sprays or other chemicals on or near this unit.  
36  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
08  
If you use a chemical-impregnated cleaning  
cloth, read the instructions carefully before  
use. These cloths may leave smear marks on  
half-mirror finish surfaces; if this happens,  
finish with a dry cloth.  
Widescreen TV users  
If you have a widescreen TV, the TV Screen  
setting (page 33) of this player should be set to  
16:9 (Wide).  
When you watch discs recorded in 4:3 format,  
you can use the TV controls to select how the  
picture is presented. Your TV may offer various  
zoom and stretch options; see the instructions  
that came with your TV for details.  
Cleaning the pickup lens  
The DVD player’s lens should not become dirty  
in normal use, but if for some reason it should  
malfunction due to dust or dirt, consult your  
nearest Pioneer-authorized service center. We  
do not recommend using commercially  
available lens cleaners for CD players.  
Please note that some movie aspect ratios are  
wider than 16:9, so even though you have a  
widescreen TV, these discs will still play in a  
‘letter box’ style with black bars at the top and  
bottom of the screen.  
Condensation  
Condensation may form inside the player if it is  
brought into a warm room from outside, or if  
the temperature of the room rises quickly.  
Although the condensation won’t damage the  
player, it may temporarily impair its  
performance. Leave it to adjust to the warmer  
temperature for about an hour before  
switching on.  
Standard TV users  
If you have a standard TV, the TV Screen  
setting (page 33) of this player should be set to  
4:3 (Letter Box) or 4:3 (Pan&Scan),  
depending on which you prefer.  
Set to 4:3 (Letter Box), widescreen discs are  
shown with black bars top and bottom.  
Moving the player  
If you need to move the player, first press  
STANDBY/ON on the front panel to turn the  
player off. Wait for -OFF- to disappear from the  
display, then unplug the power cable. Never lift  
or move the unit during playback—discs rotate  
at a high speed and may be damaged.  
Set to 4:3 (Pan&Scan), widescreen discs are  
shown with the left and right sides cropped.  
Although the picture looks larger, you don’t  
actually see the whole picture.  
Screen sizes and disc formats  
DVD-Video discs come in several different  
screen aspect ratios, ranging from TV  
programs, which are generally 4:3, to  
CinemaScope widescreen movies, with an  
aspect ratio of up to about 7:3.  
Please note that many widescreen discs  
override the player’s settings so that the disc is  
shown in letter box format regardless of the  
setting.  
Televisions, too, come in different aspect  
ratios; ‘standard’ 4:3 and widescreen 16:9.  
37  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
Additional information  
Note  
Disc  
Type  
Player setting  
• Using the 16:9 (Wide) setting with a  
standard 4:3 TV, or either of the 4:3 settings  
with a widescreen TV, will result in a  
distorted picture.  
Format  
NTSC  
PAL  
NTSC  
NTSC  
NTSC  
PAL  
PAL  
PAL  
AUTO  
NTSC  
PAL  
DVD/  
Super  
VCD  
Setting the TV system  
Video CD NTSC  
PAL  
NTSC  
NTSC  
NTSC  
PAL  
PAL  
PAL  
NTSC  
PAL  
The default setting of this player is AUTO, and  
unless you notice that the picture is distorted  
when playing some discs, you should leave it  
set to AUTO. If you experience picture distor-  
tion with some discs, set the TV system to  
match your country or region’s system. Doing  
this, however, may restrict the kinds of disc you  
can watch. The table below shows what kinds  
of disc are compatible with each setting  
(AUTO, PAL and NTSC).  
CD  
NTSC or  
PAL  
no disc  
Resetting the player  
Use this procedure to reset all the player’s  
settings to the factory default.  
1
Switch the player into standby.  
1
If the player is on, press STANDBY/  
2
Using the front panel buttons,  
ON to switch it to standby.  
hold down the (stop) button and press  
STANDBY/ON to switch the player back  
on.  
2
Using the front panel controls, hold  
down then press STANDBY/ON to  
switch the TV system.  
All the player’s settings are now reset.  
The TV system changes as follows:  
AUTO NTSC  
NTSC PAL  
PAL AUTO  
Power reset  
Use this procedure to switch the power off if  
the player is unresponsive to any control from  
the front panel or remote.  
1
Press and hold the front panel ꢂ  
Note  
STANDBY/ON for 10 seconds.  
• You have to switch the player into standby  
(press STANDBY/ON) before each  
change.  
When the power is completely off, you cannot  
use the remote to switch it back on again. Use  
the front panel STANDBY/ON button.  
38  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
DVD-Video regions  
08  
All DVD-Video discs carry a region mark on the  
case somewhere that indicates which  
region(s) of the world the disc is compatible  
with. Your DVD player also has a region mark,  
which you can find on the rear panel. Discs  
from incompatible regions will not play in this  
player. Discs marked ALL will play in any  
player.  
The diagram below shows the various DVD  
regions of the world.  
1
5
2
1
6
2
3
4
5
2
4
Selecting languages using the  
language code list  
Some of the language options (such as ‘DVD  
Language’ in the Setup Navigator) allow you to  
set your prefered language from any of the 136  
languages listed in the language code list on  
page 40.  
1
Select ‘Other Language’.  
2
Use the ꢂ/(cursor left/right) buttons  
to select either a code letter or a code  
number.  
3
Use the ꢀ/ꢁ (cursor up/down) buttons  
to select a code letter or a code number.  
See Language code list on page 40 for a  
complete list of languages and codes.  
39  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
Additional information  
Language code list  
Language (Language code letter), Language code  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
German (de), 0405  
Italian (it), 0920  
Spanish (es), 0519  
Chinese (zh), 2608  
Dutch (nl), 1412  
Portuguese (pt), 1620  
Swedish (sv), 1922  
Russian (ru), 1821  
Korean (ko), 1115  
Greek (el), 0512  
Bhutani (dz), 0426  
Esperanto (eo), 0515  
Estonian (et), 0520  
Basque (eu), 0521  
Persian (fa), 0601  
Finnish (fi), 0609  
Fiji (fj), 0610  
Faroese (fo), 0615  
Frisian (fy), 0625  
Kirghiz (ky), 1125  
Latin (la), 1201  
Lingala (ln), 1214  
Laothian (lo), 1215  
Lithuanian (lt), 1220  
Latvian (lv), 1222  
Sinhalese (si), 1909  
Slovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Somali (so), 1915  
Albanian (sq), 1917  
Serbian (sr), 1918  
Siswati (ss), 1919  
Sesotho (st), 1920  
Sundanese (su), 1921  
Swahili (sw), 1923  
Tamil (ta), 2001  
Malagasy (mg), 1307  
Maori (mi), 1309  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Moldavian (mo), 1315  
Marathi (mr), 1318  
Malay (ms), 1319  
Maltese (mt), 1320  
Burmese (my), 1325  
Nauru (na), 1401  
Nepali (ne), 1405  
Norwegian (no), 1415  
Occitan (oc), 1503  
Oromo (om), 1513  
Oriya (or), 1518  
Irish (ga), 0701  
Scots-Gaelic (gd), 0704  
Galician (gl), 0712  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Hausa (ha), 0801  
Hindi (hi), 0809  
Croatian (hr), 0818  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Interlingua (ia), 0901  
Interlingue (ie), 0905  
Inupiak (ik), 0911  
Indonesian (in), 0914  
Icelandic (is), 0919  
Hebrew (iw), 0923  
Yiddish (ji), 1009  
Javanese (jw), 1023  
Georgian (ka), 1101  
Kazakh (kk), 1111  
Greenlandic (kl), 1112  
Cambodian (km), 1113  
Kannada (kn), 1114  
Kashmiri (ks), 1119  
Kurdish (ku), 1121  
Afar (aa), 0101  
Telugu (te), 2005  
Tajik (tg), 2007  
Thai (th), 2008  
Abkhazian (ab), 0102  
Afrikaans (af), 0106  
Amharic (am), 0113  
Arabic (ar), 0118  
Assamese (as), 0119  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Byelorussian (be), 0205  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Bislama (bi), 0209  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Catalan (ca), 0301  
Corsican (co), 0315  
Czech (cs), 0319  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Setswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Panjabi (pa), 1601  
Polish (pl), 1612  
Pashto, Pushto (ps), 1619 Twi (tw), 2023  
Quechua (qu), 1721  
Rhaeto-Romance (rm), 1813 Urdu (ur), 2118  
Ukrainian (uk), 2111  
Kirundi (rn), 1814  
Uzbek (uz), 2126  
Vietnamese (vi), 2209  
Volapük (vo), 2215  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yoruba (yo), 2515  
Zulu (zu), 2621  
Romanian (ro), 1815  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sindhi (sd), 1904  
Sangho (sg), 1907  
Serbo-Croatian (sh), 1908  
Welsh (cy), 0325  
Danish (da), 0401  
Country code list  
Country, Country code, Country code letter  
Argentina, 0118, ar  
Australia, 0121, au  
Austria, 0120, at  
Belgium, 0205, be  
Brazil, 0218, br  
Canada, 0301, ca  
Chile, 0312, cl  
Finland, 0609, fi  
France, 0618, fr  
Germany, 0405, de  
Hong Kong, 0811, hk  
India, 0914, in  
Indonesia, 0904, id  
Italy, 0920, it  
Malaysia, 1325, my  
Mexico, 1324, mx  
Netherlands, 1412, nl  
New Zealand, 1426, nz  
Norway, 1415, no  
Pakistan, 1611, pk  
Philippines, 1608, ph  
Portugal, 1620, pt  
Singapore, 1907, sg  
Spain, 0519, es  
Sweden, 1905, se  
Switzerland, 0308, ch  
Taiwan, 2023, tw  
Thailand, 2008, th  
United Kingdom, 0702, gb  
USA, 2119, us  
China, 0314, cn  
Japan, 1016, jp  
Denmark, 0411, dk  
Korea, Republic of, 1118, kr Russian Federation, 1821, ru  
40  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Glossary  
08  
MP3  
MP3 (MPEG1 audio layer 3) is a  
compressed stereo audio file format.  
Files are recognized by their file  
extension “.mp3”.  
Analog audio Direct representation of sound by an  
electrical signal. See also Digital audio.  
MPEG audio An audio format used on Video CD/  
Aspect ratio The width of a TV screen relative to its  
height. Conventional TVs are 4:3;  
Super VCDs and some DVD discs.  
widescreen models are 16:9.  
PBC  
(PlayBack  
Control)  
A system of navigating a Video CD/  
Super VCD through on-screen menus  
recorded onto the disc.  
Digital audio Indirect representation of sound using  
numbers. See also Sampling frequency  
and Analog audio.  
PCM  
Digital audio encoding system found on  
(Pulse Code CDs. Good quality, but requires a lot of  
Modulation) data compared to Dolby Digital, DTS  
and MPEG encoded audio. See also  
Digital audio.  
Dolby  
A multi-channel audio encoding system  
developed by Dolby Laboratories that  
enables far more audio to be stored on a  
disc than PCM encoding. See also PCM  
(Pulse Code Modulation).  
Digital*1  
1
Progressive All the lines that make up a video  
scan video  
picture are updated in one pass  
(compared to interlace which takes two  
passes to update the whole picture).  
DRM  
DRM (Digital Rights Management) copy  
protection is a technology designed to  
prevent unauthorized copying by  
restricting playback, etc. of material on  
devices other the PC (or other WMA  
recording equipment) used to record it.  
For detailed information, please see the  
instruction manuals or help files that  
came with your PC (or other WMA  
recording equipment) and/or software.  
Regions  
These associate DVD-Video discs and  
players with particular areas of the  
world. See DVD-Video regions on  
page 39 for more information.  
Sampling  
frequency  
The rate at which sound is measured to  
be turned into digital audio data. The  
higher the rate, the better the sound  
quality. CD is 44.1 kHz; DVD can be up  
to 96 kHz. See also Digital audio.  
DTS*2  
EXIF  
A multi-channel audio encoding system  
developed by Digital Theater Systems  
that enables far more audio to be stored  
on a disc than PCM encoding. See also  
PCM (Pulse Code Modulation).  
WMA  
WMA is short for Windows Media Audio  
and refers to an audio compression  
technology developed by Microsoft  
Corporation. Files are recognized by  
their file extension “.wma”.  
Microsoft, Windows Media, and the  
Windows logo are trademarks, or  
registered trademarks of Microsoft  
Corporation in the United States and/or  
other countries.  
A file format developed by Fuji Photo  
(Exchangeabl Film for digital still cameras. Digital  
e Image File) cameras from various manuafcturers  
use this compressed file format which  
carries date, time and thumbnail  
information, as well as the picture data.  
File  
extension  
A tag added to the end of a filename to  
indicate the type of file. For example,  
“.mp3” indicates an MP3 file.  
*1  
Manufactured under license from Dolby  
Laboratories. “Dolby” and the double-D symbol  
are trademarks of Dolby Laboratories.  
ISO 9660  
format  
International standard for the volume  
and file structure of CD-ROM discs.  
JPEG  
A standard file format used for still  
images. JPEG files are identified by the  
file extension “.jpg”.  
*2  
“DTS” and “DTS Digital Out” are registered  
trademarks of Digital Theater Systems, Inc.  
41  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
Additional information  
Specifications  
Digital audio characteristics  
Frequency response . . . . . . . . . . .4 Hz to 44 kHz  
(DVD fs: 96 kHz)  
General  
System . . . . . . . . . . . . . . . . . . . . . . . . .DVD player  
Power requirements  
S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 dB  
Dynamic range. . . . . . . . . . . . . . . . . . . . . . 101 dB  
Total harmonic distortion . . . . . . . . . . . 0.0020 %  
Wow and flutter . . . . . . . . Limit of measurement  
. . . . . . . . . . . . . . . AC 110–127/220–240 V, 50/60 Hz  
Power consumption . . . . . . . . . . . . . . . . . . . 10 W  
Power consumption (standby) . . . . . . . . .0.12 W  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2kg  
Dimensions . . 420 (W) x 55 (H) x 247 (D) mm  
Operating temperature . . . . . . . .+5°C to +35°C  
Operating humidity. . . . . . . . . . . . . . . 5% to 85%  
(no condensation)  
(
0.001% W. PEAK) or lower  
Digital output  
Coaxial digital output jack. . . . . . . . . . . RCAjack  
Optical digital output. . . . . . . Optical digital jack  
Component video output  
Y (luminance) - Output level. . . . . . 1 Vp-p (75 )  
Accessories  
Audio/video cable . . . . . . . . . . . . . . . . . . . . . . . . 1  
Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
AA/R6P dry cell batteries . . . . . . . . . . . . . . . . . 2  
Operating Instructions . . . . . . . . . . . . . . . . . . . . 2  
P
P
(color) - Output level . . . . . . . . 0.7 Vp-p (75 )  
(color) - Output level . . . . . . . . 0.7 Vp-p (75 )  
B
R
Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA  
S-video output  
Y (luminance) - Output level. . . . . . 1 Vp-p (75 )  
C (color) - Output level . . . . . . .286 mVp-p (75 )  
Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-video  
The specifications and design of this product are subject to  
change without notice, due to improvement.  
Video output  
Output level . . . . . . . . . . . . . . . . . . 1 Vp-p (75 )  
Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA  
Published by Pioneer Corporation.  
Copyright © 2004 Pioneer Corporation.  
All rights reserved  
Audio output (1 stereo pair)  
Output level . . . . . . . . . . . . . During audio output  
200 mVrms (1 kHz, –20 dB)  
Number of channels . . . . . . . . . . . . . . . . . . . . . 2  
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA  
42  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Published by Pioneer Corporation.  
Copyright © 2004 Pioneer Corporation.  
All rights reserved  
PIONEER CORPORATION  
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan  
PIONEER ELECTRONICS (USA) INC.  
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404  
PIONEER ELECTRONICS OF CANADA, INC.  
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300  
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.  
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270  
K002_En  
<TPTZZ>  
Printed in  
<VRB1345-A>  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Guitar Tracer LT User Manual
Philips Coffeemaker HD7811 User Manual
Philips Home Theater System HTS3000 User Manual
Philips Projection Television 51PW9303 User Manual
Philips Stereo System FW 996 User Manual
Pinnacle Design TV Video Accessories TV44303 User Manual
Pioneer DVD Player PDV 20 User Manual
Pioneer Home Theater System HTZ 434DVD User Manual
Poulan Trimmer 530054785 User Manual
Poulan Trimmer 545137272 User Manual