Pioneer DVD Player BDP 05FD User Manual
Operating Instructions  
Blu-ray Disc PLAYER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
The following caution label appears on your unit.  
Location: inside of the unit  
This product is a class 1 laser product, but this  
product contains a laser diode higher than Class 1.  
To ensure continued safety, do not remove any covers  
or attempt to gain access to the inside of the product.  
Refer all servicing to qualified personnel.  
D3-4-2-1-8_B_En  
Operating Environment  
ꢀꢁꢂꢃꢄꢃꢅ  
ꢀ#ꢁ$ꢂ&ꢃ!ꢄꢀꢁ!(ꢃ$"! ꢁ!&ꢀ&ꢁ #ꢁ$ꢂ&'$ꢁꢀꢂ!ꢅꢀꢆ' ꢃꢅꢃ&*ꢇ  
ꢈꢉꢀ+ꢊꢀ&"ꢀꢈꢋꢉꢀ+ꢊꢀꢌꢈ ꢍꢀ+ꢎꢀ&"ꢀꢈꢏꢉꢀ+ꢎꢐꢑꢀꢒꢁ%%ꢀ&ꢆꢂ!ꢀꢓꢉꢀꢔꢕꢖꢀ  
ꢌꢗ""ꢒꢃ!ꢄꢀ(ꢁ!&%ꢀ!"&ꢀꢘꢒ"ꢗꢙꢁꢅꢐ  
ꢆ"ꢇ#%ꢈ)ꢈ!'ꢇꢉꢇꢊꢋ%ꢈꢇꢌꢉ+ꢉ%ꢍꢎꢇꢍ"ꢇ!"'ꢇ#ꢏꢉꢐꢈꢇꢉ!*ꢇ!ꢉꢑꢈꢍꢇ  
ꢊꢏꢉ ꢈꢇ&"(%ꢐꢈ&ꢇꢒ&(ꢐꢌꢇꢉ&ꢇꢉꢇꢏꢋꢓꢌ'ꢈꢍꢇꢐꢉ!ꢍꢏꢈꢔꢇ"!ꢇ'ꢌꢈꢇ  
ꢈ$(ꢋ# ꢈ!'ꢕꢇ ꢇ ꢇ  
ꢖ
ꢗꢘꢗꢙꢗꢚꢗꢛꢉꢜꢁꢜꢝ!  
ꢚ"ꢀ!"&ꢀꢃ!%&ꢂꢒꢒꢀ&ꢆꢃ%ꢀ'!ꢃ&ꢀꢃ!ꢀꢂꢀ#""$ꢒ*ꢀ(ꢁ!&ꢃꢒꢂ&ꢁꢅꢀꢂ$ꢁꢂꢛꢀ"$ꢀꢃ!ꢀ  
ꢒ"ꢗꢂ&ꢃ"!%ꢀꢁ)#"%ꢁꢅꢀ&"ꢀꢆꢃꢄꢆꢀꢆ' ꢃꢅꢃ&*ꢀ"$ꢀꢅꢃ$ꢁꢗ&ꢀ%'!ꢒꢃꢄꢆ&ꢀꢌ"$ꢀ  
%&$"!ꢄꢀꢂ$&ꢃꢜꢃꢗꢃꢂꢒꢀꢒꢃꢄꢆ&ꢐ  
D3-4-2-1-7c_A_En  
WARNING  
This equipment is not waterproof. To prevent a fire  
or shock hazard, do not place any container filled  
with liquid near this equipment (such as a vase or  
flower pot) or expose it to dripping, splashing, rain  
ꢀꢁꢂꢃꢄꢅꢆꢃꢄꢇꢂꢇꢈꢆꢉꢃꢄꢇꢂ  
ꢊ$!)ꢇ%)./ꢋ''%)#ꢇ/$%.ꢇ0)%/ꢎꢇ(ꢋ&!ꢇ.0-!ꢇ/*ꢇ'!ꢋ1!ꢇ.+ꢋꢌ!ꢇ  
ꢋ-*0) ꢇ/$!ꢇ0)%/ꢇ"*-ꢇ1!)/%'ꢋ/%*)ꢇ/*ꢇ%(+-*1!ꢇ$!ꢋ/ꢇ  
-ꢋ %ꢋ/%*)ꢇꢒꢋ/ꢇ'!ꢋ./ꢇꢍꢎꢇꢌ(ꢇꢋ/ꢇ/*+ꢎꢇꢍꢎꢇꢌ(ꢇꢋ/ꢇ-!ꢋ-ꢎꢇꢋ) ꢇ  
ꢍꢎꢇꢌ(ꢇꢋ/ꢇ!ꢋꢌ$ꢇ.% !ꢔꢕ  
or moisture.  
D3-4-2-1-3_B_En  
ꢊꢆꢏꢂꢄꢂꢐ  
ꢀꢁꢁꢂꢃꢂꢄꢇ  
ꢑ'*/.ꢇꢋ) ꢇ*+!)%)#.ꢇ%)ꢇ/$!ꢇꢌꢋꢒ%)!/ꢇꢋ-!ꢇ+-*1% ! ꢇ"*-ꢇ  
1!)/%'ꢋ/%*)ꢇ/*ꢇ!).0-!ꢇ-!'%ꢋꢒ'!ꢇ*+!-ꢋ/%*)ꢇ*"ꢇ/$!ꢇ  
+-* 0ꢌ/ꢎꢇꢋ) ꢇ/*ꢇ+-*/!ꢌ/ꢇ%/ꢇ"-*(ꢇ*1!-$!ꢋ/%)#ꢕꢇꢃ*ꢇ  
+-!1!)/ꢇ"%-!ꢇ$ꢋ4ꢋ- ꢎꢇ/$!ꢇ*+!)%)#.ꢇ.$*0' ꢇ)!1!-ꢇꢒ!ꢇ  
ꢒ'*ꢌ&! ꢇ*-ꢇꢌ*1!-! ꢇ2%/$ꢇ%/!(.ꢇꢒ.0ꢌ$ꢇꢋ.ꢇ)!2.+ꢋ+!-.ꢎꢇ  
/ꢋꢒ'!ꢗꢌ'*/$.ꢎꢇꢌ0-/ꢋ%).ꢔꢇ*-ꢇꢒ3ꢇ*+!-ꢋ/%)#ꢇ/$!ꢇ  
ꢌꢀ ꢁꢂꢀꢀꢃꢄꢅꢆꢆꢇꢈꢆꢀꢇꢈꢀ ꢁꢂꢀꢉꢊꢀꢀ ꢇꢂꢋꢉꢀꢉꢇꢌꢀꢍꢀꢂꢀꢎꢏꢀꢉꢊꢀꢀ ꢁꢄꢄꢁꢐꢇꢈꢆꢀ  
ꢀꢋꢀꢑꢉꢇꢁꢈꢀꢑꢎꢂꢀ ꢅꢄꢄꢒꢓ  
ꢅꢆꢇꢇ+$!)ꢈꢉꢇꢇ$ꢊꢇ)ꢆꢇꢇꢈ+ꢈ !ꢈꢋ!ꢇꢇ%$,ꢇ'ꢇ(*%%!-ꢇꢌ ꢊꢊꢇ'(ꢇ  
ꢈꢍꢍ$'ꢌ #ꢉꢇ)$ꢇꢍ$*#)'-ꢇ$'ꢇ'ꢇꢉ $#ꢕꢇꢎꢇꢇ(*'ꢇꢇ)ꢆꢈ)ꢇ)ꢆꢇꢇ  
%$,ꢇ'ꢇ(*%%!-ꢇ+$!)ꢈꢉꢇꢇ$ꢊꢇ)ꢆꢇꢇꢈ'ꢇꢈꢇ,ꢆꢇ'ꢇꢇ)ꢆ (ꢇ*# )ꢇ  
, !!ꢇꢋꢇꢇ*(ꢇꢌꢇ"ꢇꢇ)(ꢇ)ꢆꢇꢇ'ꢇ&* 'ꢇꢌꢇ+$!)ꢈꢉꢇꢇꢒꢇꢕꢉꢕꢎꢇ ꢏꢐꢇꢑꢇ  
3
En  
!,0%+(!)/ꢇ*)ꢇ/$%ꢌ&ꢇꢌꢋ-+!/ꢇ*-ꢇꢋꢇꢒ! ꢕ  
ꢇ
ꢓꢔꢗꢕꢗ ꢗꢍꢗꢖꢒꢗꢆꢗꢁ)  
$'ꢇꢒ ꢐꢇꢑꢔꢇ,' ))ꢇ#ꢇ$#ꢇ)ꢆꢇꢇ'ꢇꢈ'ꢇ%ꢈ#ꢇ!ꢕꢇ  
ꢓꢏꢗꢔꢗ ꢗꢒꢗꢔꢕꢁꢕꢖ#  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢚꢀꢛꢁꢑꢀꢀꢁꢀꢂꢃ ꢄꢀꢅꢆꢀꢇꢈꢉꢊꢀ ꢋꢉꢇꢀꢌꢅꢍꢊꢀꢋꢅꢇꢀꢎꢏꢇꢐꢈꢀꢇꢈꢍꢀꢀꢁꢀ  
ꢅ ꢇꢃꢍꢇꢀ$ꢅ ꢀ"ꢏꢋꢇꢀꢇꢅꢀ ꢊꢍꢑꢀꢇꢈꢍꢀꢂꢃ ꢄꢀꢎ ꢊꢇꢀꢒꢍꢀꢓꢍꢎꢅ!ꢍꢌꢀ  
ꢏꢋꢌꢀꢏꢂꢂꢓꢅꢂꢓꢉꢏꢇꢍꢀꢅꢋꢍꢀꢆꢉꢇꢇꢍꢌꢔꢀꢕꢍꢂꢃꢏꢐꢍꢎꢍꢋꢇꢀꢏꢋꢌꢀ  
ꢎꢅ ꢋꢇꢉꢋꢄꢀꢅꢆꢀꢏꢋꢀꢀꢁꢀꢂꢃ ꢄꢀꢅꢋꢀꢇꢈꢍꢀꢂꢅ"ꢍꢓꢀꢊ ꢂꢂꢃ$ꢀꢐꢅꢓꢌꢀꢅꢆꢀ  
ꢇꢈꢉꢊꢀ ꢋꢉꢇꢀꢊꢈꢅ ꢃꢌꢀꢒꢍꢀꢂꢍꢓꢆꢅꢓꢎꢍꢌꢀꢅꢋꢃ$ꢀꢒ$ꢀꢖ ꢏꢃꢉꢆꢉꢍꢌꢀ  
ꢊꢍꢓ!ꢉꢐꢍꢀꢂꢍꢓꢊꢅꢋꢋꢍꢃꢔꢀ ꢆꢀꢐꢅꢋꢋꢍꢐꢇꢍꢌꢀꢇꢅꢀꢏꢋꢀꢀꢁꢀꢅ ꢇꢃꢍꢇꢑꢀꢇꢈꢍꢀ  
ꢐ ꢇꢗꢅꢆꢆꢀꢂꢃ ꢄꢀꢐꢏꢋꢀꢐꢏ ꢊꢍꢀꢊꢍ!ꢍꢓꢍꢀꢍꢃꢍꢐꢇꢓꢉꢐꢏꢃꢀꢊꢈꢅꢐꢘꢔꢀꢙꢏꢘꢍꢀ  
ꢊ ꢓꢍꢀꢉꢇꢀꢉꢊꢀꢂꢓꢅꢂꢍꢓꢃ$ꢀꢌꢉꢊꢂꢅꢊꢍꢌꢀꢅꢆꢀꢏꢆꢇꢍꢓꢀꢓꢍꢎꢅ!ꢏꢃꢔ  
ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢀꢂꢃꢀꢋꢆꢅꢀꢌꢍꢎꢍꢅꢏꢐꢀꢁꢆꢈꢃꢍꢁꢆꢐꢇꢀꢄꢈꢅꢄꢆꢃꢍꢃꢑꢀꢒꢎꢓꢀ  
ꢋꢏꢂꢐꢈꢅꢍꢀꢇꢈꢍꢀꢊꢆꢀꢈꢃꢍꢀꢋꢆꢅꢀꢆꢊꢁꢍꢅꢀꢊꢁꢏꢎꢀꢁꢆꢈꢃꢍꢁꢆꢐꢇꢀꢄꢈꢅꢄꢆꢃꢍꢃꢀ  
ꢔꢃꢈꢉꢁꢀꢏꢃꢀꢐꢆꢎꢌꢕꢊꢍꢅꢖꢀꢈꢃꢍꢀꢋꢆꢅꢀ ꢈꢃꢂꢎꢍꢃꢃꢀꢄꢈꢅꢄꢆꢃꢍꢃꢀꢂꢎꢀꢏꢀ  
ꢅꢍꢃꢊꢏꢈꢅꢏꢎꢊꢀꢆꢅꢀꢈꢃꢍꢀꢂꢎꢀꢏꢀꢉꢏꢅꢀꢆꢅꢀꢃꢁꢂꢄꢗꢀꢏꢎꢇꢀꢘꢁꢂꢉꢁꢀ  
ꢅꢍꢙꢈꢂꢅꢍꢃꢀꢅꢍꢄꢏꢂꢅꢀꢘꢂꢐꢐꢀ ꢍꢀꢉꢁꢏꢅꢌꢍꢇꢀꢋꢆꢅꢀꢍꢚꢍꢎꢀꢇꢈꢅꢂꢎꢌꢀꢊꢁꢍꢀ  
ꢘꢏꢅꢅꢏꢎꢊꢓꢀꢄꢍꢅꢂꢆꢇꢑꢀ  
ꢀꢁꢂꢃꢄꢅꢆ  
ꢀ ꢁꢂꢃꢄꢅ ꢃꢆꢇꢅꢇꢈꢉꢊ ꢋ  
ꢚꢈꢍꢀꢍꢖ ꢉꢂꢎꢍꢋꢇꢀꢊꢈꢅ ꢃꢌꢀꢒꢍꢀꢌꢉꢊꢐꢅꢋꢋꢍꢐꢇꢍꢌꢀꢒ$ꢀꢓꢍꢎꢅ!ꢉꢋꢄꢀ  
ꢇꢈꢍꢀꢎꢏꢉꢋꢊꢀꢂꢃ ꢄꢀꢆꢓꢅꢎꢀꢇꢈꢍꢀ"ꢏꢃꢃꢀꢊꢅꢐꢘꢍꢇꢀ"ꢈꢍꢋꢀꢃꢍꢆꢇꢀ  
 ꢋ ꢊꢍꢌꢀꢆꢅꢓꢀꢏꢀꢃꢅꢋꢄꢀꢂꢍꢓꢉꢅꢌꢀꢅꢆꢀꢇꢉꢎꢍꢀꢛꢆꢅꢓꢀꢍ#ꢏꢎꢂꢃꢍꢑꢀ"ꢈꢍꢋꢀ  
ꢀꢁꢂꢃꢄꢅꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀꢌ!ꢀꢆꢇꢅꢀꢈꢄꢍꢎꢏꢀꢒꢉꢀꢂꢉꢆꢀꢈꢍꢄꢄꢀꢉꢍꢆꢀꢆꢇꢅꢀ  
ꢈꢄꢍꢎꢀꢌ!ꢀꢆꢍꢎꢎꢐꢂꢎꢀꢆꢇꢅꢀꢋꢉꢊꢃꢀꢁꢂꢃꢀꢂꢅꢑꢅꢊꢀꢆꢉꢍꢋꢇꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀ  
ꢋꢉꢊꢃꢀ ꢇꢅꢂꢀ!ꢉꢍꢊꢀꢇꢁꢂꢃꢒꢀꢁꢊꢅꢀ ꢅꢆꢀꢁꢒꢀꢆꢇꢐꢒꢀꢋꢉꢍꢄꢃꢀꢋꢁꢍꢒꢅꢀꢁꢀ  
ꢒꢇꢉꢊꢆꢀꢋꢐꢊꢋꢍꢐꢆꢀꢉꢊꢀꢅꢄꢅꢋꢆꢊꢐꢋꢀꢒꢇꢉꢋꢓꢏꢀꢒꢉꢀꢂꢉꢆꢀꢈꢄꢁꢋꢅꢀꢆꢇꢅꢀꢍꢂꢐꢆꢔꢀꢁꢀ  
ꢈꢐꢅꢋꢅꢀꢉꢕꢀꢕꢍꢊꢂꢐꢆꢍꢊꢅꢔꢀꢅꢆꢋꢏꢔꢀꢉꢂꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢔꢀꢉꢊꢀꢈꢐꢂꢋꢇꢀꢆꢇꢅꢀ  
ꢋꢉꢊꢃꢏꢀ ꢅꢑꢅꢊꢀꢖꢁꢓꢅꢀꢁꢀꢓꢂꢉꢆꢀꢐꢂꢀꢆꢇꢅꢀꢋꢉꢊꢃꢀꢉꢊꢀꢆꢐꢅꢀꢐꢆꢀ ꢐꢆꢇꢀꢉꢆꢇꢅꢊꢀ  
ꢋꢉꢊꢃꢒꢏꢀꢗꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢒꢀꢒꢇꢉꢍꢄꢃꢀꢌꢅꢀꢊꢉꢍꢆꢅꢃꢀꢒꢍꢋꢇꢀꢆꢇꢁꢆꢀꢆꢇꢅ!ꢀ  
ꢁꢊꢅꢀꢂꢉꢆꢀꢄꢐꢓꢅꢄ!ꢀꢆꢉꢀꢌꢅꢀꢒꢆꢅꢈꢈꢅꢃꢀꢉꢂꢏꢀꢘꢀꢃꢁꢖꢁꢎꢅꢃꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀ  
ꢋꢁꢂꢀꢋꢁꢍꢒꢅꢀꢁꢀꢕꢐꢊꢅꢀꢉꢊꢀꢎꢐꢑꢅꢀ!ꢉꢍꢀꢁꢂꢀꢅꢄꢅꢋꢆꢊꢐꢋꢁꢄꢀꢒꢇꢉꢋꢓꢏꢀꢑꢇꢅꢋꢓꢀ  
ꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀꢉꢂꢋꢅꢀꢐꢂꢀꢁꢀ ꢇꢐꢄꢅꢏꢀꢙꢕꢀ!ꢉꢍꢀꢕꢐꢂꢃꢀꢐꢆꢀꢃꢁꢖꢁꢎꢅꢃꢔꢀ  
ꢋꢉꢂꢆꢁꢋꢆꢀꢆꢇꢅꢀꢚꢐꢉꢂꢅꢅꢊꢀꢒꢅꢊꢑꢐꢋꢅꢀꢋꢅꢂꢆꢅꢊꢀꢉꢂꢀꢆꢇꢅꢀꢌꢁꢋꢓꢀꢋꢉꢑꢅꢊꢔꢀꢉꢊꢀ  
!ꢉꢍꢊꢀꢃꢅꢁꢄꢅꢊꢀꢕꢉꢊꢀꢁꢀꢊꢅꢈꢄꢁꢋꢅꢖꢅꢂꢆꢏ  
ꢅꢋꢀ!ꢏꢐꢏꢇꢉꢅꢋꢜꢔꢀ  
ꢀ
ꢀ
ꢀꢅꢂꢁꢂꢂꢂꢂꢂꢃꢈ ꢄ ꢅꢉ  
CAUTION  
The ꢀꢁSTANDBY/ON switch on this unit will not  
completely shut off all power from the AC outlet.  
Since the power cord serves as the main disconnect  
device for the unit, you will need to unplug it from  
the AC outlet to shut down all power. Therefore,  
make sure the unit has been installed so that the  
power cord can be easily unplugged from the AC  
outlet in case of an accident. To avoid fire hazard,  
the power cord should also be unplugged from the  
AC outlet when left unused for a long period of time  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized  
by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
(for example, when on vacation).  
D3-4-2-2-2a_A_En  
WARNING:ꢀꢛꢏꢀꢁꢂꢃꢀꢄꢀꢅꢆꢇꢀꢈꢉꢊꢁꢀꢉꢀꢀꢅꢆꢃꢋꢀꢌꢊꢉꢁꢍꢈꢅꢀꢉꢊꢀ  
ꢈꢉꢊꢁꢋꢀꢎꢋꢋꢉꢈꢃꢎꢅꢇꢁꢀꢏꢃꢅꢆꢀꢎꢈꢈꢇꢋꢋꢉꢊꢃꢇꢋꢀꢋꢉꢂꢁꢀꢏꢃꢅꢆꢀꢅꢆꢇꢀ  
ꢌꢊꢉꢁꢍꢈꢅꢀꢏꢃꢂꢂꢀꢇꢐꢌꢉꢋꢇꢀꢑꢉꢍꢀꢅꢉꢀꢈꢆꢇꢒꢃꢈꢎꢂꢋꢀꢂꢃꢋꢅꢇꢁꢀꢉꢀꢀ  
ꢌꢊꢉꢌꢉꢋꢃꢅꢃꢉꢀꢀꢓꢔꢀꢕꢀꢉꢏꢀꢀꢅꢉꢀꢅꢆꢇꢀꢖꢅꢎꢅꢇꢀꢉꢗꢀꢑꢎꢂꢃꢗꢉꢊꢀꢃꢎꢀꢎꢀꢁꢀ  
ꢉꢅꢆꢇꢊꢀꢄꢉꢘꢇꢊꢀꢒꢇꢀꢅꢎꢂꢀꢇꢀꢅꢃꢅꢃꢇꢋꢀꢅꢉꢀꢈꢎꢍꢋꢇꢀꢈꢎꢀꢈꢇꢊꢀꢎꢀꢁꢀ  
ꢃꢊꢅꢆꢀꢁꢇꢗꢇꢈꢅꢀꢉꢊꢀꢉꢅꢆꢇꢊꢀꢊꢇꢌꢊꢉꢁꢍꢈꢅꢃꢘꢇꢀꢆꢎꢊꢒꢓ  
Wash hands after handling  
ꢀ
D36-P4_A_En  
ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢀꢉꢆꢋꢊꢌꢂꢋꢃꢀꢍꢎꢅꢉꢈꢅꢏꢐꢀꢒꢂꢃꢄꢆꢃꢌꢑꢀꢆꢒꢀꢊꢁꢂꢃꢀ  
ꢍꢌꢊꢎꢅꢂꢌꢑꢀꢍꢌꢏꢀꢓꢎꢀꢅꢎꢔꢈꢑꢌꢊꢎꢇꢀꢇꢈꢎꢀꢊꢆꢀꢎꢋꢕꢂꢅꢆꢋꢍꢎꢋꢊꢌꢑꢀ  
ꢉꢆꢋꢃꢂꢇꢎꢅꢌꢊꢂꢆꢋꢃꢐꢀꢍꢆꢅꢀꢇꢂꢃꢄꢆꢃꢌꢑꢀꢆꢅꢀꢅꢎꢉꢏꢉꢑꢂꢋꢔꢀꢂꢋꢒꢆꢅꢍꢌꢊꢂꢆꢋꢖꢀ  
ꢄꢑꢎꢌꢃꢎꢀꢉꢆꢋꢊꢌꢉꢊꢀꢏꢆꢈꢅꢀꢑꢆꢉꢌꢑꢀꢌꢈꢊꢁꢆꢅꢂꢊꢂꢎꢃꢀꢆꢅꢀꢊꢁꢎꢀꢃꢑꢎꢉꢊꢅꢆꢋꢂꢉꢃꢀ  
ꢋꢇꢈꢃꢊꢅꢂꢎꢃꢀꢗꢑꢑꢂꢌꢋꢉꢎꢀꢘꢀꢙꢙꢙꢐꢎꢂꢌꢎꢐꢆꢅꢔꢐꢀ  
ꢗꢌꢘꢙꢚꢛꢀ  
4
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
We Want You Listening For A Lifetime  
Since hearing damage from loud noise is often  
undetectable until it is too late, this manufacturer  
and the Electronic Industries Association’s  
Consumer Electronics Group recommend you avoid  
prolonged exposure to excessive noise. This list of  
sound levels is included for your protection.  
Selecting fine audio equipment such as the unit  
you’ve just purchased is only the start of your  
musical enjoyment. Now it’s time to consider how  
you can maximize the fun and excitement your  
equipment offers. This manufacturer and the  
Electronic Industries Association’s Consumer  
Electronics Group want you to get the most out of  
your equipment by playing it at a safe level. One that  
lets the sound come through loud and clear without  
annoying blaring or distortion-and, most importantly,  
without affecting your sensitive hearing.  
Decibel  
Level Example  
30 Quiet library, soft whispers  
40 Living room, refrigerator, bedroom away from traffic  
50 Light traffic, normal conversation, quiet office  
60 Air conditioner at 20 feet, sewing machine  
70 Vacuum cleaner, hair dryer, noisy restaurant  
80 Average city traffic, garbage disposals, alarm clock  
at two feet.  
Sound can be deceiving. Over time your hearing  
“comfort level” adapts to higher volumes of sound.  
So what sounds “normal” can actually be loud and  
harmful to your hearing. Guard against this by  
setting your equipment at a safe level BEFORE your  
hearing adapts.  
THE FOLLOWING NOISES CAN BE DANGEROUS  
UNDER CONSTANT EXPOSURE  
90 Subway, motorcycle, truck traffic, lawn mower  
100 Garbage truck, chain saw, pneumatic drill  
120 Rock band concert in front of speakers,  
thunderclap  
140 Gunshot blast, jet plane  
180 Rocket launching pad  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it  
comfortably and clearly, and without distortion.  
Information courtesy of the Deafness Research Foundation.  
Once you have established a comfortable sound  
level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent  
hearing damage or loss in the future. After all, we  
want you listening for a lifetime.  
S001_En  
5
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
01 Before you start  
05 Adjusting audio and video  
Adjusting the video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Adjusting the Audio DRC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . . 7  
Types of discs/files that can be played. . . . . . . . . . . . . . . . . . . . . . . . 8  
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Playable files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
06 Advanced settings  
Changing the settings (Initial Setup) . . . . . . . . . . . . . . . . . . . . . . . .39  
Operating the Initial Setup screen . . . . . . . . . . . . . . . . . . . . . . . . .39  
Changing to other language at language setting . . . . . . . . . . . . .43  
Changing the speaker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43  
Adjusting the output level of the various speakers  
(Channel Level). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Registering or Changing the password . . . . . . . . . . . . . . . . . . . . .44  
Changing the Age Restriction for watching BD-ROMs . . . . . . . .45  
Changing the Parental Lock level for watching DVDs . . . . . . . . .46  
Changing the Country/Area code . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Changing the terminals for outputting video and audio signals  
(Output Terminal Priority) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
Restoring all the settings to the factory default settings . . . . . . .49  
About the audio output settings . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
02 Connecting up  
Connecting a TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Connecting using a commercially available HDMI cable . . . . . . 14  
Connecting using a commercially available component video  
cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Connecting using the included audio cable and video  
cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Connecting an AV receiver or amplifier. . . . . . . . . . . . . . . . . . . . . . 17  
Connecting using a commercially available HDMI cable . . . . . . 17  
Connecting using audio cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Connecting using a commercially available digital audio  
cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Connecting the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
07 Additional information  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
When connected using an HDMI cable. . . . . . . . . . . . . . . . . . . . .53  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Language Code Table and Country/Area Code Table . . . . . . . . . . .56  
Language Code Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Country/Area Code Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Moving the player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Place of installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Turn the power off when not using the player . . . . . . . . . . . . . . . .58  
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Cleaning the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Caution for when the unit is installed in a rack with a glass  
door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Cleaning the pickup lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62  
03 Getting Started  
Making settings using the Setup Navigator menu . . . . . . . . . . . . . 20  
Operating the TV with the player’s remote control . . . . . . . . . . . . . 22  
TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Using the TOOLS menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Erasing the additional data from BD-ROMs . . . . . . . . . . . . . . . . . . 24  
Switching the video output terminal . . . . . . . . . . . . . . . . . . . . . . . . 24  
Switching the output video resolution . . . . . . . . . . . . . . . . . . . . . . . 25  
04 Playback  
Playing discs or files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Forward and reverse scanning. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Playing specific titles, chapters or tracks . . . . . . . . . . . . . . . . . . . 27  
Skipping content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Playing in slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Step forward and step reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Switching the camera angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Switching the subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Switching the audio streams/channels . . . . . . . . . . . . . . . . . . . . 28  
Switching the secondary video . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Displaying the disc information. . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Using the Play Mode functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Playing from a specific time (Time Search) . . . . . . . . . . . . . . . . . 29  
Playing a specific title, chapter or track (Search) . . . . . . . . . . . . 30  
Playing a specific section within a title or track repeatedly  
(A-B Repeat). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Playing repeatedly (Repeat Play) . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Playing in random order (Random Play). . . . . . . . . . . . . . . . . . . . 32  
About Play Mode types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Playing from the Home Media Gallery. . . . . . . . . . . . . . . . . . . . . . . 34  
Playing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Playing music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Playing in the desired order (HMG Playlist) . . . . . . . . . . . . . . . . . 35  
6
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
01  
Before you start  
3
Close the rear cover.  
What’s in the box  
Close securely (a click should be heard).  
Audio cable (white/red plugs) x 1  
Remote control x 1  
STANDBY/ON  
OPEN/CLOSE  
TV CONTROL  
INPUT  
SELECT  
CH  
VOL  
AUDIO SUBTITLE ANGLE FL DIMMER  
Video cable (yellow plugs) x 1  
Power cable x 1  
CLEAR  
ENTER  
Caution  
SECONDARY  
AUDIO  
VIDEO  
OUTPUT  
RESOLUTION  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
• Do not mix new and old batteries together.  
DISPLAY POPUP MENU  
MENU  
• Batteries may have different voltages, even if they look similar.  
Do not use different kinds of batteries together.  
TOP MENU  
TOOLS  
ENTER  
• To prevent leakage of battery fluid, remove the batteries if you do  
not plan to use the remote control for a long period of time (1  
month or more). If the fluid should leak, wipe it carefully off the  
inside of the case, then insert new batteries.  
HOME  
MENU  
RETURN  
PLAY  
AA/R6 dry cell batteries x 2  
PREV  
RED  
PAUSE  
GREEN  
STOP  
BLUE  
NEXT  
YELLOW  
VIDEO ADJUST  
• When disposing of used batteries, please comply with  
governmental regulations or environmental public instruction’s  
rules that apply in your country/area.  
• WARNING  
Warranty card  
Do not use or store batteries in direct sunlight or other  
excessively hot place, such as inside a car or near a heater. This  
can cause batteries to leak, overheat, explode or catch fire. It  
BD PLAYER  
Operating instructions (this manual)  
can also reduce the life or performance of batteries.  
D3-4-2-3-3_En  
Putting the batteries in the  
remote control  
1
Open the rear cover.  
Press lightly on this  
part and slide into  
the direction of the  
arrow.  
2
Insert the batteries (AA/R6 x 2).  
Insert as indicated by the /marks into the battery compartment.  
Insert the negative  
() side first.  
7
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Types of discs/files that can be played  
01  
Playable discs  
Discs with the logo marks below indicated on the disc label, package or jacket can be played.  
Logo  
Application format  
Disc type  
CD-DA  
1
2
BDAV  
DVD-Video DVD VR  
BDMV  
DATA-DISC  
DTS-CD  
BD-ROM  
BD-R  
BD  
BD-RE  
DVD-ROM  
DVD-R  
DVD  
DVD-R DL  
(Dual Layer)  
DVD-RW  
DVD+R  
DVD+RW  
CD-DA  
(Music CD)  
CD  
CD-R  
CD-RW  
CD-ROM  
1. Including the AVCHD format.  
2. Discs on which music files are recorded  
8
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discs that cannot be played  
• HD DVDs  
01  
• DVD Audio discs  
• DVD-RAM discs  
• Non-finalized DVD-R/DVD-RW/DVD+R/DVD+RW discs in the  
DVD-Video format and AVCHD format  
• Non-finalized Dual Layer DVD-R discs in the DVD VR format  
• SACDs  
Manufactured under license from Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of Dolby Laboratories.  
• Video CDs  
• SVCDs  
This player conforms to NTSC standards. Discs for which “NTSC” is  
indicated on the disc label, package or jacket can be played.  
“Blu-ray Disc” and  
are trademarks.  
Manufactured under license under U.S. Patent #: 5,451,942;  
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide  
patents issued & pending. DTS is a registered trademark and the DTS  
logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are  
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.  
is a trademark of DVD Format/Logo Licensing Corporation.  
Note  
• Some discs cannot be played, even if one of the above logo  
marks is indicated.  
Playing BDs  
• To play 8 cm discs, set the disc in the 8 cm disc depression in  
the center of the disc tray. No adapter is necessary. 8 cm BD-  
ROMs cannot be played.  
• BDs (BDMV) compatible with the formats below can be played.  
– Blu-ray Disc Read-Only (ROM) Format Version 2  
– Blu-ray Disc Recordable (R) Format Version 2  
– Blu-ray Disc Rewritable (RE) Format Version 3  
About audio formats  
The following audio formats are supported on this player:  
• Dolby TrueHD  
This player supports BD-ROM Profile 1 Version 1.1.  
BONUSVIEW Functions such as playback of secondary video  
(Picture-in-Picture) and secondary audio can be used. For  
details on secondary video and secondary audio playback, refer  
to the disc’s instructions.  
• Dolby Digital Plus  
• Dolby Digital  
• DTS-HD Master Audio  
• DTS-HD High Resolution Audio  
• DTS Digital Surround  
• MPEG  
“BONUSVIEW” is trademark of Blu-ray Disc Association.  
When a BD-ROM is played, additional data may be stored in the  
player’s memory area (local storage). If the message indicating  
low memory (local storage) appears, erase the BDMV data  
(page 24).  
• MPEG-2 AAC  
• Linear PCM  
To enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus,  
DTS-HD Master Audio and DTS-HD High Resolution Audio, it is  
recommended to connect the player to an AV receiver or amplifier  
compatible with these audio formats using an HDMI cable. After  
loading a BD containing sound in one of these audio formats, select  
the audio format on the menu screen.  
• BDs (BDAV) compatible with the formats below can be played.  
– Blu-ray Disc Recordable (R) Format Version 1  
– Blu-ray Disc Rewritable (RE) Format Version 2  
• Dual Layer BDs can be played.  
See About the audio output settings on page 50 for the output  
conditions of the different formats.  
• Music files recorded on BDs cannot be played.  
• 8 cm BD-ROMs cannot be played.  
9
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing DVDs  
• DVD-Video can be played.  
DualDisc playback  
A DualDisc is a new two-sided disc, one side of which contains DVD  
content — video, audio, etc. — while the other side contains non-  
DVD content such as digital audio material.  
01  
• DVD-R/-RW/+R/+RW discs recorded in the DVD-Video format  
can be played (finalize them before playing them on this player).  
The DVD side of a DualDisc will be played on this player (excluding  
any DVD-Audio content).  
• DVD-R/-RW discs recorded in the VR format (Video Recording  
format) can be played.  
The non-DVD, audio side of the disc is not compatible with this  
player.  
• This label indicates playback compatibility with DVD-RW discs  
recorded in VR format (Video Recording format). However, for  
discs recorded with a record-only-once encrypted program,  
playback can only be achieved using a CPRM compatible  
device.  
It is possible that when loading or ejecting a DualDisc, the opposite  
side to that being played will be scratched. Scratched discs may not  
be playable.  
For more detailed information on the DualDisc specification, please  
refer to the disc manufacturer or disc retailer.  
Playing discs created on computers  
• DVDs recorded in the AVCHD format can be played (finalize  
them before playing them on this player).  
• It may not be possible to play DVD-R/-RW or CD-R/-RW discs  
recorded using a personal recorder or computer. (This can be  
due to various reasons, including disc properties, scratches, dirt  
on the disc, dirt on the player’s lens, condensation and so on.)  
• It may not be possible to play discs recorded using a computer  
due to the application settings or environment. Record discs in  
the proper format. For details, contact the dealer.  
“AVCHD” and the “AVCHD” logo are trademarks of Matsushita  
Electric Industrial Co., Ltd. and Sony Corporation.  
• Music files recorded on DVD-R/-RW/+R/+RW discs can be  
played. See Playable files on page 10.  
Playable files  
• Dual Layer DVDs can be played. However, Non-finalized Dual  
Layer DVD-R discs recorded in the VR format cannot be played  
(finalize them before playing them on this player).  
Music files recorded on DVDs and CDs can be played.  
• HD DVD, DVD Audio and DVD-RAM discs cannot be played.  
Caution  
About region numbers  
Blu-ray Disc Player and BD-ROM or DVD-Video discs are assigned  
region numbers according to the region in which they are sold.  
• In DVD, only the one recorded by the ISO 9660 file system can be  
played.  
• Some files may not be playable.  
This player’s region numbers are:  
• BD-ROM: A  
• For some files, it may not be possible to use certain functions  
during playback.  
• DVD-Video: 1  
• It may not be possible to play some files, even if they have the  
extension of a file playable on this player.  
Discs not including these numbers cannot be played. Discs  
playable on this player are as shown below.  
• Files protected by DRM (Digital Rights Management) cannot be  
played.  
Supported music file formats  
• Windows Media™ Audio 9 (WMA9)  
Bit rate: Up to 192 kbps  
• BDs: A (including A) and ALL  
• DVDs: 1 (including 1) and ALL  
Sampling frequencies: 22.05 kHz, 32 kHz, 44.1 kHz and 48 kHz  
• MPEG-1 Audio Layer 3 (MP3)  
Bit rate: Up to 320 kbps  
Sampling frequencies: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz,  
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz  
Playing CDs  
• Music CDs (CD-DAs and DTS-CDs) can be played.  
Playable file extensions  
• Music files  
• Music files recorded on CDs can be played. See Playable files on  
page 10.  
.wma and .mp3  
• Windows Media is either a registered trademark or trademark of  
Microsoft Corporation in the United States and/or other countries.  
• SACD, Video CD and Super VCD discs cannot be played.  
• Regarding copy protected CDs: This player is designed to  
conform to the specifications of the Audio CD format. This  
player does not support the playback or function of discs that do  
not conform to these specifications.  
• This product includes technology owned by Microsoft Corporation  
and cannot be used or distributed without a license from  
Microsoft Licensing, Inc.  
10  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Number buttons – Use these to select and play the title/  
chapter/track you want to watch or listen to and to select items  
from menus.  
Part Names and Functions  
01  
CLEAR – Press to clear the numeric number, etc.  
ENTER – Press to execute the selected item or enter a setting  
that has been changed, etc.  
Remote Control  
6
7
SECONDARY AUDIO – When playing a BD-ROM on which  
secondary audio is recorded, press to switch to the secondary  
audio (page 28).  
SECONDARY VIDEO – When playing a BD-ROM on which  
secondary video (Picture-in-Picture) is recorded, press to switch  
to the secondary video (page 29).  
STANDBY/ON  
OPEN/CLOSE  
1
15  
16  
TV CONTROL  
INPUT  
SELECT  
CH  
VOL  
2
3
FL DIMMER  
AUDIO SUBTITLE ANGLE  
VIDEO SELECT  
Press to switch the terminal from which the video signals are  
output. Use to switch between digital output (HDMI output) and  
analog output (Component Video output, S-Video output or Video  
output) (the signals are only output from the selected video  
output terminal) (page 24).  
4
17  
5
6
8
HOME MEDIA GALLERY  
CLEAR  
ENTER  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
Press to display/hide the Home Media Gallery screen (page 34).  
VIDEO  
9
TOP MENU  
18  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
7
8
Press to display the top menu of the BD-ROM or DVD-Video.  
19  
21  
DISPLAY POPUP MENU  
MENU  
20  
22  
10 ///– Use to select items, change settings and move  
the cursor.  
TOOLS  
TOP MENU  
9
ENTER – Press to execute the selected item or enter a setting  
that has been changed, etc.  
ENTER  
10  
11  
12  
11  
HOME MENU  
HOME  
MENU  
RETURN  
Press to display/hide the Home Menu.  
23  
PLAY  
12 PLAY – Press to start playback.  
PAUSE – Press to pause playback. Press again to restart  
playback.  
PREV  
RED  
PAUSE  
GREEN  
STOP  
BLUE  
NEXT  
YELLOW  
STOP – Press to stop playback.  
13  
14  
VIDEO ADJUST  
PREV/NEXT – Press to skip to the beginning of the  
previous/next title/chapter/track/file (page 27).  
// – Press during playback to start reverse scanning.  
While playback is paused, press for step reverse playback. Press  
and hold while playback is paused for reverse slow motion  
playback (pages 26 and 27).  
//– Press during playback to start forward scanning.  
While playback is paused, press for step forward playback.  
Press and hold while playback is paused for forward slow  
motion playback (pages 26 and 27).  
BD PLAYER  
13 RED/GREEN/BLUE/YELLOW  
1
STANDBY/ON  
Use these to navigate BD-ROM menus.  
Press to turn the power on and off.  
14 VIDEO ADJUST  
2
TV CONTROL  
Press to display/hide the Video Adjust menu (page 37).  
Your TV can be controlled using the player’s remote control  
(page 22).  
15 OPEN/CLOSE  
– Press to turn the TV’s power on and off.  
INPUT SELECT – Press to switch the TV’s input.  
CH +/– – Press to select the TV channel.  
VOL +/– – Press to adjust the volume.  
Press to open and close the disc tray.  
16 FL DIMMER  
Press to switch the brightness of the front panel display. The FL OFF  
indicator lights when Off is selected.  
17 ANGLE  
3
AUDIO  
Press to switch the BD-ROM or DVD-Video camera angles  
(page 28).  
Press to switch the audio streams/channels (page 28).  
4
SUBTITLE  
Press to switch the subtitles (page 28).  
11  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 OUTPUT RESOLUTION  
Use these to switch the output video resolution from the HDMI OUT  
or COMPONENT VIDEO output terminals (page 25).  
21 DISPLAY  
Press to display disc information (page 29).  
01  
22  
TOOLS  
19 PLAY MODE  
Press to display/hide the Play Mode screen (page 29).  
Press to display/hide the TOOLS menu (page 23).  
23  
RETURN  
20 POP UP MENU/MENU  
Press to return to the previous screen.  
Press to display the BD-ROM or DVD-Video menus.  
Front Panel  
2
3
4
1
5
10  
9
8
7
6
1
STANDBY/ON  
8
9
Disc tray  
Press to turn the power on and off.  
FL OFF indicator  
2
Remote control sensor  
This lights when Off is selected with FL DIMMER.  
Point the remote control to this, then operate it within approximately  
23 feet.  
10 HD indicator  
This lights when an HDMI cable is connected and video signals are  
being output with a resolution of 1080/60i, 1080/60p, 1080/24p or  
720/60p. It also lights when a component video cable is connected  
and video signals are being output with a resolution of 1080/60i or  
720/60p.  
The player may have trouble capturing remote control signals if  
there is a fluorescent light nearby. If this happens, move the player  
away from the fluorescent light.  
3
4
Front panel display  
Touch sensor – Touch the center of the words or marks lightly  
to operate.  
OPEN/CLOSE – Press to open and close the disc tray.  
RESOLUTION – Press to switch the output video resolution from  
the HDMI output or component video output terminals  
(page 25).  
/– Press to skip to the beginning of the previous title/  
chapter/track/file. Press and hold to start reverse scanning  
(pages 26 and 27).  
/– Press to skip to the beginning of the next title/  
chapter/track/file. Press and hold to start forward scanning  
(pages 26 and 27).  
– Press during playback to pause. Press again to restrart  
playback.  
– Press to stop playback.  
5
Press to start playback.  
6
HDMI indicator  
This lights when an HDMI-compatible device is connected  
(page 14).  
7
Touch sensor indicator  
This lights when the touch sensor is touched.  
12  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Display  
01  
1
2
3
PQLS  
24HZ  
50HZ  
60HZ  
CONTROL  
6
5
4
1
4
Character display  
Lights during playback.  
Displays the title/chapter/track number, elapsed time, etc.  
2
5 24HZ/50HZ/60HZ  
Lights when playback is paused.  
The frequency of the video frame or field being output lights.  
6 CONTROL  
3
PQLS  
Lights when the PQLS function is activated (page 15).  
Lights when the HDMI Control function is activated (page 15).  
Rear Panel  
1
2
3
4
5
SURROUND  
BACK  
FRONT SURROUND  
CENTER  
L
R
L
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
AC IN  
DIGITAL  
OUT  
Y
COAXIAL  
CONTROL  
IN  
PB  
PR  
VIDEO  
HDMI OUT  
OPTICAL  
S-VIDEO  
7
6
1
DIGITAL OUT (COAXIAL/OPTICAL)  
Caution  
Connect with the digital audio input terminal on an AV receiver or  
amplifier, etc.  
• Be sure to connect cables for outputting the audio and video  
signals (pages 14 and 17).  
2
AUDIO OUT (2 ch) terminals  
• When connected via System Control, point the remote control  
toward the connected component (such as an AV receiver or  
amplifier). The remote will not work correctly when pointed at  
this player.  
Connect with the audio input terminals on a TV, AV receiver or  
amplifier, etc.  
3
AUDIO OUT (7.1 ch) terminals  
Connect with the multi-channel (7.1- or 5.1-channel) audio input  
terminals on an AV receiver or amplifier, etc.  
• You cannot use System Control with components that do not  
have a System Control terminal or with components  
manufactured by companies other than Pioneer.  
4
VIDEO OUT terminals  
VIDEO – Connect with the video input terminal on a TV, AV  
receiver or amplifier, etc.  
S-VIDEO – Connect with the S-Video input terminal on a TV, AV  
receiver or amplifier, etc.  
COMPONENT VIDEO – Connect with the component video  
input terminals on a TV, AV receiver or amplifier, etc.  
5
AC IN  
Connect the power cord here.  
6
HDMI OUT terminal  
Connect with an HDMI-compatible TV, AV receiver or amplifier, etc.  
7
CONTROL IN terminal  
Use to control this player from the remote sensor of another Pioneer  
component with a CONTROL OUT terminal and bearing the   
mark. Connect the CONTROL OUT of the other component to the  
CONTROL IN of this player using a mini-plug cord.  
13  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CChoaptnern2 ecting up  
02  
Player’s rear panel  
Connecting a TV  
SURROUND  
BACK  
FRONT SURROUND  
CENTER  
L
R
L
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
AC IN  
DIGITAL  
OUT  
Y
Be sure to turn off the power and unplug the power cord from the  
power outlet whenever making or changing connections.  
COAXIAL  
CONTROL  
IN  
PB  
PR  
VIDEO  
HDMI OUT  
OPTICAL  
S-VIDEO  
Note  
P
P
B
R
VIDEO  
HDMI OUT  
• Make the settings in the Setup Navigator menu according to the  
type of cable connected (page 20).  
S-VIDEO  
Connecting using a commercially  
available HDMI cable  
It is also possible to  
connect to an AV  
receiver or amplifier  
using an HDMI cable  
(page 17).  
Match the direction of  
the plug to the terminal  
and insert straight.  
The audio and video signals can be transferred to HDMI-compatible  
devices as digital signals with no loss of sound or video quality. After  
connecting, make the settings at the Setup Navigator menu  
according to the connected HDMI-compatible device (page 20).  
To HDMI input terminal  
Also refer to the operating instructions of the device being  
connected.  
Note  
• The HDMI indicator on the player’s front panel lights when an  
HDMI-compatible device is connected. (Depending on the  
connected device, in some cases it may only light when the  
player is selected as the device’s input.)  
TV  
• 1080p video signals may not be output, depending on the HDMI  
cable being used.  
Direction of  
signal flow  
Caution  
• Hold the plug when connecting and disconnecting the cable.  
• Placing a load on the plug could result in faulty contact and no  
video signals being output.  
About HDMI  
This player incorporates High-Definition Multimedia Interface  
(HDMI™) technology.  
The player supports Deep Color.  
The conventional players can transmit a video signal with 8 bit color  
depth in the YCbCr 4:4:4 or RGB formats, the players supporting  
Deep Color can transmit a video signal with a color bit depth of  
greater than 8 bits per color component. Subtle color gradations  
can be reproduced when connected to a TV that supports Deep  
Color.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC.  
14  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio signals that can be transferred with  
the player’s HDMI output terminal  
• Dolby TrueHD  
About HDMI Control function  
02  
• When the player is connected to a Pioneer Flat Panel TV or AV  
system (AV receiver or amplifier, etc.), supporting the HDMI  
Control function, it can be operated from the Flat Panel TV or AV  
system (AV receiver or amplifier, etc.).  
• Dolby Digital Plus  
• Dolby Digital  
• The Flat Panel TV’s input is switched automatically when  
playback is started on the player or the Home Menu or the Home  
Media Gallery is displayed. When the input is switched, the  
playback picture, the Home Menu or the Home Media Gallery  
appears on the Flat Panel TV (Auto-select function). If the Flat  
Panel TV’s power is being turned off at this time, it may turn on  
automatically (Simultaneous power function). When the  
language information from a connected Flat Panel TV is  
received, you can have the player’s on-screen display language  
change automatically to that of the Flat Panel TV (Unified  
language function). This function is available only when  
playback is stopped and the menu screen is not displayed.  
• DTS-HD Master Audio  
• DTS-HD High Resolution Audio  
• DTS Digital Surround  
• MPEG-2 AAC  
• Linear PCM  
Linear PCM audio signals meeting the following conditions can  
be output:  
– Sampling frequency: 32 kHz to 192 kHz  
– Number of channels: Up to 8 (up to 6 for a 192 kHz sampling  
frequency)  
• Also refer to the operating instructions of the Flat Panel TV or AV  
system (AV receiver or amplifier, etc.).  
For details, see About the audio output settings on page 50.  
To use the HDMI Control function  
About the HDMI high speed transmission  
• The HDMI Control function operates when HDMI Control is set  
to On for all devices connected with HDMI cables. Once  
connections and the settings of all the devices are finished, be  
sure to check that the player’s picture is output to the Flat Panel  
TV. (Also check after changing the connected devices and  
reconnecting HDMI cables.) The HDMI Control function may not  
operate properly if the player’s picture is not properly output to  
the Flat Panel TV.  
This player outputs 1080/60p and Deep Color video signals. If your  
TV supports 1080/60p or Deep Color signals, use a High Speed  
HDMI™ cable in order to take advantage of the maximum  
performance the player and TV can offer. Also set HDMI High-  
Speed Transmission to On (page 41).  
High Speed HDMI™ cables are tested to carry signals up to 1080p.  
1080/60i, 1080/60p, 1080/24p and 720/60p video signals that are  
capable of Deep Color can also be carried.  
• Use High Speed HDMI™ cables when using the HDMI Control  
function. The HDMI Control function may not operate properly if  
other HDMI cables are used.  
Note  
• Set HDMI High-Speed Transmission to Off when using an  
HDMI cable other than a High Speed HDMI™ cable (a Standard  
HDMI™ cable).  
• The function name of KURO LINK used on the web and in  
catalogs is referred to as HDMI Control in the operating  
instructions and on the player.  
• The following restrictions apply when HDMI High-Speed  
Transmission is set to Off:  
About PQLS function  
The PQLS (Precision Quartz Lock System) is a transfer control  
technology using the HDMI Control function. The player’s output  
signals are controlled from the AV receiver or amplifier to achieve  
high quality sound playback using the quartz oscillator of AV  
receiver or amplifier. This eliminates the influence of the jitter  
generated upon transfer which can adversely affect the sound  
quality.  
– Deep Color signals are not output.  
– If output video resolution is set to Auto, the signals are output  
with a resolution of 1080/60i, even if the TV’s preferred  
resolution is 1080/60p.  
– When the output video resolution is set to 480i or 480p, Dolby  
TrueHD and DTS-HD Master Audio signals are not output as  
such. They are either output as Dolby Digital or DTS Digital  
Surround signals or converted into linear PCM. Also, 96 kHz  
and 192 kHz multi-channel linear PCM audio signals cannot  
be output. They are output as 2-channel signals (page 50).  
• The PQLS function is only activated when the player is  
connected to a Pioneer AV receiver or amplifier compatible with  
the PQLS function via HDMI connection.  
• The PQLS function is only activated when playing a music CD  
(CD-DA).  
• When an HDMI cable with a built-in equalizer is connected, it  
may not operate properly.  
• The PQLS function is activated when the player is set as follows  
(page 41):  
HDMI Control: On  
PQLS: Auto  
About HDCP  
HDCP (High-bandwidth Digital Content Protection) is a copyright  
protection system by which digital video signals are encrypted.  
• Also refer to the operating instructions of AV receiver or  
amplifier.  
When connected to a DVI device  
• It is not possible to connect DVI devices (computer displays,  
for example) that are not compatible with HDCP.  
Caution  
• No audio signals are output. Connect using an audio cable  
(included), etc.  
• If the output video resolution is switched when playing a music  
CD (CD-DA), the PQLS function does not work. This function will  
work again after playback stops and restarts.  
• This player is designed for connection with HDMI-compatible  
devices. When connected to a DVI device, it may not operate  
properly depending on the DVI device.  
15  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting using a commercially  
available component video cable  
Connecting using the included  
audio cable and video cable  
02  
Player’s rear panel  
Player’s rear panel  
SURROUND  
BACK  
SURROUND  
BACK  
FRONT SURROUND  
CENTER  
FRONT SURROUND  
CENTER  
L
L
R
L
R
L
R
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
AC IN  
COMPONENT VIDEO  
AC IN  
DIGITAL  
OUT  
DIGITAL  
OUT  
Y
Y
CO
CAXIAL  
CONTRO
I
PB  
PR  
VIDEO  
CONT
HDMI OUT  
PB  
PR  
VIDEO  
HDMI OUT  
OPTICAL  
OPTICAL  
S-VIDEO  
S-VIDO  
SURROUND  
BACK  
SURROUND  
BACK  
FRONT  
CENTER  
SURROUND  
FRONT  
CENTER  
SURROUND  
L
L
L
R
L
R
R
R
SUB WOOFER  
SUB WOOFER  
VIDEO OUT  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
COMPONENT VIDEO  
DIGITAL  
DIGITAL  
OUT  
OUT  
Y
Y
COAXIAL  
COAXIAL  
L
PB  
PR  
VIDEO  
PB  
PR  
VIDEO  
HDMI OUT  
HDMI OUT  
OPTICAL  
OPTICAL  
S-VIDEO  
S-VIDEO  
It is also possible to  
connect to an AV  
receiver or amplifier.  
Connect the audio  
signals using audio  
cables (7.1 channels),  
an optical digital audio  
cable or a coaxial  
digital audio cable  
(page 18).  
It is also possible to  
connect to an AV  
receiver or amplifier.  
Connect the audio  
signals using audio  
cables (7.1 channels),  
an optical digital audio  
cable or a coaxial  
digital audio cable  
(page 18).  
To audio input  
terminals  
To component video input  
terminals  
To video input  
terminal  
To S-Video input  
terminal  
To audio input  
terminals  
TV  
TV  
Direction of  
signal flow  
Direction of  
signal flow  
Caution  
• When connected to the TV using a component video cable  
(commercially available), video signals are not output with a  
resolution of 1080/60p or 1080/24p.  
• Depending on the output video resolution setting, the picture  
may not be output (page 25).  
16  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting using a commercially  
available HDMI cable  
Caution  
02  
• Video signals are only output with a resolution of 480/60i when  
connected using a video cable (included) or an S-Video cable  
(commercially available).  
• Connect the player’s video output directly to your TV.  
This player supports analog copy protection technology.  
Therefore the picture may not be displayed properly if connected  
to a TV via a DVD recorder/video deck or when playing the  
player’s output material that is recorded by a DVD recorder/  
video deck. Furthermore, the picture may not be displayed  
properly due to the copy protection when the player is connected  
to a TV with a built-in video deck. For details, contact the  
manufacturer of your TV.  
Caution  
• When DTS-HD Master Audio and DTS-HD High Resolution  
Audio signals are output as linear PCM signals, the DTS Digital  
Surround signals are converted to linear PCM for output  
(page 50).  
Player’s rear panel  
SURROUND  
BACK  
FRONT SURROUND  
CENTER  
L
R
L
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
AC IN  
DIGITAL  
OUT  
Y
COAXIAL  
CONTROL  
IN  
PB  
PR  
VIDEO  
HDMI OUT  
Connecting an AV receiver  
or amplifier  
OPTICAL  
S-VIDEO  
PB  
PR  
VIDEO  
HDMI OUT  
Connect to an AV receiver or amplifier in order to enjoy the surround  
sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD  
Master Audio, DTS-HD High Resolution Audio or DTS Digital  
Surround. For instructions on connecting the TV and speakers to the  
AV receiver or amplifier, refer to the operating instructions of AV  
receiver or amplifier.  
S-VIDEO  
Match the direction of  
the plug to the terminal  
and insert straight.  
Note  
• Make the settings in the Setup Navigator menu according to the  
type of cable connected (page 20).  
AV receiver or amplifier  
To HDMI input terminal  
• To output video signals from this player, connect using one of  
the following (not including when connected using an HDMI  
cable): a component video cable (commercially available), an S-  
Video cable (commercially available) or a video cable (included).  
From HDMI output terminal  
To HDMI input terminal  
TV  
Direction of  
signal flow  
17  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting using audio cables  
Connecting using a commercially  
available digital audio cable  
02  
Caution  
Connect either an optical digital audio cable or a coaxial digital  
audio cable.  
• For DTS-HD Master Audio and DTS-HD High Resolution Audio  
signals, the DTS Digital Surround signals are converted to linear  
PCM for output (page 50).  
Player’s rear panel  
SURROUND  
BACK  
FRONT SURROUND  
CENTER  
L
R
L
When connecting to a 7.1-channel compatible AV receiver or  
amplifier – Connect using the included audio cable and 3  
commercially available audio cables (diagram below).  
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
AC IN  
DIGITAL  
OUT  
Y
COAXIAL  
CONTROL  
IN  
PB  
PR  
VIDEO  
HDMI OUT  
OPTICAL  
S-VIDEO  
When connecting to a 5.1-channel compatible AV receiver or  
amplifier – Connect using the included audio cable and 2  
commercially available audio cables (do not connect to the  
surround back left and right terminals).  
SURROUND  
FRONT  
CENTER  
SURROUND  
BACK  
L
L
R
• After connecting, set Audio Output Mode to Multi-channel  
(page 40).  
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
Player’s rear panel  
COMPONENT VIDEO  
DIGITAL  
OUT  
SURROUND  
BACK  
FRONT SURROUND  
CENTER  
Y
L
R
L
COAXIAL  
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
AC IN  
DIGITAL  
OUT  
L
Y
COAXIAL  
PB  
PR  
VIDEO  
CONTROL  
IN  
PB  
PR  
VIDEO  
HDMI OUT  
HDMI OUT  
OPTICAL  
S-VIDEO  
OPTICAL  
S-VIDEO  
SURROUND  
BACK  
FRONT  
CENTER  
SURROUND  
L
L
R
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
DIGITAL  
OUT  
Y
COAXIAL  
L
PB  
PR  
VIDEO  
HDMI OUT  
OPTICAL  
S-VIDEO  
To coaxial digital  
audio input  
terminal  
To optical digital  
audio input  
terminal  
To component video input  
terminals  
AV receiver or amplifier  
Direction of  
signal flow  
To multi-channel  
audio input  
To component video input  
terminals  
terminals  
Caution  
• Dolby TrueHD and Dolby Digital Plus signals are output as the  
Dolby Digital signals or signals converted from Dolby Digital to  
linear PCM (page 50).  
AV receiver or amplifier  
• DTS-HD Master Audio and DTS-HD High Resolution Audio  
signals are output as the DTS Digital Surround signals or  
signals converted from DTS Digital Surround to linear PCM  
(page 50).  
Direction of  
signal flow  
18  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the power  
cord  
02  
Connect the power cord after all the connections between devices  
have been completed.  
Player’s rear panel  
SURROUND  
BACK  
FRONT SURROUND  
CENTER  
L
R
L
R
SUB WOOFER  
VIDEO OUT  
AUDIO OUT (2 ch)  
AUDIO OUT (7.1 ch)  
COMPONENT VIDEO  
AC IN  
DIGITAL  
OUT  
Y
COAXIAL  
CONTROL  
IN  
PB  
PR  
VIDEO  
HDMI OUT  
OPTICAL  
S-VIDEO  
UT  
AC IN  
VIDEO  
S-VIDEO  
Power cable (included)  
To wall outlet  
19  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
03  
Getting Started  
4
Select and set the video and audio output terminals.  
Making settings using the  
Setup Navigator menu  
Select the actually connected video and audio output terminals.  
Use ///to select, then press ENTER.  
TOOLS  
TOP MENU  
Be sure to perform these settings when using the player for the first  
time.  
ENTER  
HOME  
MENU  
RETURN  
Caution  
• Before turning on the power, check that the connections  
between the player and other devices are correct.  
Setup Navigator  
BD PLAYER  
1
Turn on the power.  
Select the output terminals to be used for  
the video and audio signals of this player.  
Press STANDBY/ON.  
STANDBY/ON  
OPEN/CLOSE  
Video  
HDMI  
TV CONTROL  
Audio  
HDMI  
INPUT  
SELECT  
CH  
VOL  
Use [  
press [  
][  
][  
] to select video or audio, then  
] to select the output terminal.  
2
Turn on the TV’s power and switch the input.  
• When HDMI is selected for Video or Audio, proceed to step 5.  
See the TV’s operating instructions for instructions on operating the  
TV.  
• When Component Video is selected for Video, proceed to step  
6.  
Check that the Setup Navigator menu is displayed.  
• When S-Video/Video is selected for Video, proceed to step 7.  
If TV Control is set, the TV can be operated with the player’s remote  
control (page 22).  
Setting item  
Output terminal name  
HDMI  
HDMI Output  
If the Setup Navigator menu is not  
displayed  
Component Video  
Video Output  
Component Video  
S-Video/Video  
S-Video  
Video  
Press  
HOME MENU to display the Home Menu, select  
Initial Setup Setup Navigator Start, then press ENTER.  
HDMI  
HDMI Output  
Digital Audio  
Digital Audio  
Output  
Coaxial  
Optical  
3
Select the OSD language.  
Use /to select, then press ENTER.  
Analog Audio  
Audio Output (2ch)  
Audio Output (7.1ch)  
TOOLS  
TOP MENU  
ENTER  
Caution  
HOME  
MENU  
RETURN  
• When HDMI is selected for Video, no video signals are output  
from the COMPONENT VIDEO, S-VIDEO or VIDEO output  
terminals.  
Setup Navigator  
• When Component Video or S-Video/Video is selected for  
Video, no video signals are output from the HDMI OUT  
terminal.  
BD PLAYER  
Please select the on-screen display language.  
• The video and audio signals output from the set output terminals  
are output synchronously (lip synchronization).  
• Linear PCM audio signals (2 channels) are output from all  
terminals other than the ones selected for Audio, regardless of  
the audio format or the player’s settings.  
Audio, subtitle and BDMV/DVD-Video menu  
language will also be set.  
When you have this player connected to a Pioneer Flat Panel TV that  
is compatible with HDMI Control, language settings are imported  
from the Pioneer Flat Panel TV’s language settings before Setup  
Navigator begins.  
20  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Select and set the HDMI High-Speed Transmission setting.  
8
Check the settings.  
03  
Use /to select, then press ENTER.  
Select Proceed, then press ENTER.  
TOOLS  
TOP MENU  
Setup Navigator  
BD PLAYER  
Select [Proceed] if you want to start testing  
your audio and video settings.  
ENTER  
HOME  
MENU  
RETURN  
Proceed  
Setup Navigator  
BD PLAYER  
Select the HDMI Hi-speed transmission setting.  
9
Output test tones.  
Use /to select Yes, then press ENTER.  
Off  
On  
Setup Navigator  
BD PLAYER  
Normally select [On] (Recommended).  
Select [Off] if the video or audio of HDMI-connected  
was not output in the test output.  
The test tone will be output.  
Reduce the volume to an appropriate level.  
• When HDMI High-Speed Transmission is set to On, use a High  
Speed HDMI™ cable. The picture and sound may not be output  
properly if any other HDMI cable (standard HDMI™ cable) is  
used.  
Yes  
No  
The video and/or audio may not be output under certain setup.  
The setup menu comes back in 30 seconds.  
• When HDMI is selected for Video, proceed to step 8.  
• When Component Video is selected for Video, proceed to  
step 6.  
Caution  
• When S-Video/Video is selected for Video, proceed to step 7.  
• The screen in step 10 and test tones are output simultaneously  
according to the settings in steps 4 to 7. Lower the volume of the  
devices connected with the player.  
6
Select the output video resolution from the COMPONENT  
VIDEO output terminals.  
Use /to select, then press ENTER.  
10 Finish the Setup Navigator menu.  
Use /to select Finish, then press ENTER.  
Setup Navigator  
BD PLAYER  
Select the output video resolution at the  
Setup Navigator  
BD PLAYER  
Component video terminal.  
Setup is complete!  
Finish  
Go Back  
If you select [Source Direct], the output  
resolution is determined according to the  
video format of the playing source.  
The setup menu comes back in 30 seconds.  
For details on the resolution settings, see Switching the output video  
resolution on page 25.  
To redo the settings from the start, select Go Back.  
7
Select the aspect ratio of your TV.  
Depending on the output terminal setting of step 4 or the HDMI  
cable being used, it may happen that no picture and/or sound is  
output. If this happens, the setup returns to step 4 if there is no  
operation for over 30 seconds. Once the setup returns to step 4, redo  
the settings according to the connected devices and the HDMI  
cable being used.  
Use /to select, then press ENTER.  
Setup Navigator  
BD PLAYER  
Select the screen aspect ratio to match  
your TV.  
21  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the screen saver  
TV Preset code list  
03  
The screen saver is automatically activated if there is no operation  
for over 1 minute after playback is stopped or paused. The screen  
saver turns off when an operation is performed on the player or  
remote control.  
Manufacturer Code(s)  
PIONEER 00, 31, 32, 07, 36, 42, 51  
ACURA 44  
HANSEATIC 07, 42  
HCM 18, 44  
The screen saver is automatically activated if there is no operation  
for over 1 minute after the Home Menu or Home Media Gallery is  
displayed while playing a BD or DVD.  
ADMIRAL 31  
AIWA 60  
HINARI 07, 41, 44  
HISAWA 18  
AKAI 32, 35, 42  
AKURA 41  
HITACHI 31, 33, 34, 36, 42, 43, 54, 06, 10,  
24, 25, 18  
With CDs and music files, the screen saver is automatically  
activated if no button is operated for over 1 minute, even while the  
CD or music file is playing.  
ALBA 07, 39, 41, 44  
AMSTRAD 42, 44, 47  
ANITECH 44  
HUANYU 56  
HYPSON 07, 18, 46  
ICE 46, 47  
ASA 45  
ASUKA 41  
IMPERIAL 38, 42  
INDIANA 07  
Operating the TV with the  
player’s remote control  
AUDIOGONIC 07, 36  
BASIC LINE 41, 44  
BAUR 31, 07, 42  
BEKO 38  
INGELEN 31  
INTERFUNK 31, 32, 07, 42  
INTERVISION 46, 49  
ISUKAI 41  
ITC 42  
ITT 31, 32, 42  
JEC 05  
JVC 13, 23  
KAISUI 18, 41, 44  
KAPSCH 31  
BEON 07  
BLAUPUNKT 31  
BLUE SKY 41  
BLUE STAR 18  
BPL 18  
When the manufacturer code for your brand of TV is set on the  
player’s remote control, the TV can be operated using the player’s  
remote control.  
BRANDT 36  
BTC 41  
BUSH 07, 41, 42, 44, 47, 56  
CASCADE 44  
KENDO 42  
KENNEDY 32, 42  
KORPEL 07  
1
Input the 2-digit manufacturer code.  
Press the number buttons (0 to 9) to input the code while pressing  
TV CONTROL .  
CATHAY 07  
KOYODA 44  
CENTURION 07  
CGB 42  
CIMLINE 44  
CLARIVOX 07  
CLATRONIC 38  
CONDOR 38  
LEYCO 07, 40, 46, 48  
LIESENK&TTER 07  
LOEWE 07  
LUXOR 32, 42, 43  
M-ELECTRONIC 31, 44, 45, 54, 56, 07,  
36, 51  
STANDBY/ON  
OPEN/CLOSE  
TV CONTROL  
INPUT  
SELECT  
CH  
VOL  
CONTEC 44  
CROSLEY 32  
MAGNADYNE 32, 49  
MAGNAFON 49  
MAGNAVOX 07, 10, 03, 12, 29  
MANESTH 39, 46  
MARANTZ 07  
FL DIMMER  
AUDIO SUBTITLE ANGLE  
CROWN 38, 44  
CRYSTAL 42  
CYBERTRON 41  
DAEWOO 07, 44, 56  
DAINICHI 41  
DANSAI 07  
DAYTON 44  
DECCA 07, 48  
DIXI 07, 44  
MARK 07  
MATSUI 07, 39, 40, 42, 44, 47, 48  
MCMICHAEL 34  
MEDIATOR 07  
MEMOREX 44  
METZ 31  
CLEAR  
AUDIO  
ENTER  
OUTPUT  
RESOLUTION  
VIDEO  
DUMONT 53  
ELIN 07  
ELITE 41  
ELTA 44  
MINERVA 31, 53  
MITSUBISHI 09, 10, 02, 21, 31  
MULTITECH 44, 49  
NEC 59  
Note  
EMERSON 42  
ERRES 07  
NECKERMANN 31, 07  
NEI 07, 42  
• The factory setting is PIONEER 00.  
FERGUSON 07, 36, 51  
FINLANDIA 35, 43, 54  
FINLUX 32, 07, 45, 48, 53, 54  
FIRSTLINE 40, 44  
FISHER 32, 35, 38, 45  
FORMENTI 32, 07, 42  
FRONTECH 31, 42, 46  
FRONTECH/PROTECH 32  
FUJITSU 48  
NIKKAI 05, 07, 41, 46, 48  
NOBLIKO 49  
• If you make a mistake when inputting the code, start over from  
the beginning.  
NOKIA 32, 42, 52  
NORDMENDE 32, 36, 51, 52  
OCEANIC 31, 32, 42  
ORION 32, 07, 39, 40  
OSAKI 41, 46, 48  
OSO 41  
• When there are multiple codes for a manufacturer, try inputting  
them in the indicated order until the TV can be operated.  
2
Check that the TV can be operated.  
OSUME 48  
STANDBY/ON  
OPEN/CLOSE  
FUNAI 40, 46, 58  
GBC 32, 42  
OTTO VERSAND 31, 32, 07, 42  
PALLADIUM 38  
TV CONTROL  
GE 00, 01, 08, 07, 10, 11, 17, 02, 28, 18 PANAMA 46  
INPUT  
SELECT  
GEC 07, 34, 48  
PANASONIC 31, 07, 08, 42, 22  
CH  
VOL  
GELOSO 32, 44  
GENERAL 29  
PATHO CINEMA 42  
PAUSA 44  
GENEXXA 31, 41  
GOLDSTAR 10, 23, 21, 02, 07, 50  
GOODMANS 07, 39, 47, 48, 56  
GORENJE 38  
GPM 41  
GRAETZ 31, 42  
GRANADA 07, 35, 42, 43, 48  
GRADIENTE 30, 57  
GRANDIN 18  
PHILCO 32, 42  
PHILIPS 31, 07, 34, 56, 68  
PHOENIX 32  
PHONOLA 07  
PROFEX 42, 44  
PROTECH 07, 42, 44, 46, 49  
QUELLE 31, 32, 07, 42, 45, 53  
R-LINE 07  
RADIOLA 07  
RADIOSHACK 10, 23, 21, 02  
Caution  
• For some models it may not be possible to operate the TV with  
the player’s remote control, even for TVs of brands listed on the  
manufacturer code list.  
• The setting may be restored to the default after the batteries are  
replaced. If this happens, reset it.  
22  
En  
GRUNDIG 31, 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RBM 53  
STERN 31  
SUSUMU 41  
SYSLINE 07  
TANDY 31, 41, 48  
TASHIKO 34  
TATUNG 07, 48  
TEC 42  
TELEAVIA 36  
TELEFUNKEN 36, 37, 52  
TELETECH 44  
TENSAI 40, 41  
THOMSON 36, 51, 52, 63  
THORN 31, 07, 42, 45, 48  
TOMASHI 18  
TOSHIBA 05, 02, 26, 21, 53  
TOWADA 42  
ULTRAVOX 32, 42, 49  
UNIDEN 92  
UNIVERSUM 31, 07, 38, 42, 45, 46, 54  
VESTEL 07  
03  
Note  
RCA 01, 10, 15, 16, 17, 18, 61, 62, 09  
REDIFFUSION 32, 42  
REX 31, 46  
ROADSTAR 41, 44, 46  
SABA 31, 36, 42, 51  
SAISHO 39, 44, 46  
SALORA 31, 32, 42, 43  
SAMBERS 49  
SAMSUNG 07, 38, 44, 46, 69, 70  
SANYO 35, 45, 48, 21, 14, 91  
SBR 07, 34  
SCHAUB LORENZ 42  
SCHNEIDER 07, 41, 47  
SEG 42, 46  
• Items that cannot be changed are displayed in gray. The items  
that can be selected depend on the player’s status.  
To close the TOOLS menu  
Press  
TOOLS or  
RETURN.  
TOOLS menu item list  
Item  
Description  
Output Video Resolution Switch the output video resolution from the  
various output terminals (page 25).  
SEI 32, 40, 49  
SELECO 31, 42  
SHARP 02, 19, 27, 67, 90  
SIAREM 32, 49  
SIEMENS 31  
Play from Beginning  
Play the selected title, track or file from the  
start.  
Play Mode  
Angle  
Display the Play Mode screen (page 29).  
Switch the BD-ROM/DVD-Video disc’s camera  
angles (page 28).  
SINUDYNE 32, 39, 40, 49  
SKANTIC 43  
VICTOR 13  
VOXSON 31  
SOLAVOX 31  
WALTHAM 43  
WATSON 07  
WATT RADIO 32, 42, 49  
WHITE WESTINGHOUSE 07  
YOKO 07, 42, 46  
ZENITH 03, 20  
Subtitle  
Switch the subtitles (page 28).  
SONOKO 07, 44  
SONOLOR 31, 35  
SONTEC 07  
SONY 04  
SOUNDWAVE 07  
STANDARD 41, 44  
Audio  
Switch the audio streams/channels (page 28).  
Secondary Audio  
Switch the BD-ROM’s secondary audio  
streams/channels (page 28).  
Secondary Video  
Original/Play List  
Switch the BD-ROM’s secondary video  
(Picture-in-Picture) (page 29).  
Switch the DVD-R/-RW’s (VR format) list  
screen between the original list and the  
playlist.  
Using the TOOLS menu  
Add to HMG Playlist  
Add the selected track or file to the HMG  
Playlist (page 35).  
Various functions can be called out according to the player’s  
operating status.  
Delete from HMG Playlist Delete the selected track or file from the HMG  
Playlist (page 36).  
1
Display the TOOLS menu.  
Press TOOLS.  
Now Playing  
Display the playback screen of the currently  
playing track or file.  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
Video Adjust  
Display the picture quality adjustment screen  
(page 37).  
TOOLS  
TOP MENU  
Audio DRC  
Adjust the Audio DRC (page 38).  
BDMV Data Erase  
Erase the additional data from BD-ROMs.  
ENTER  
BD PLAYER  
TOOLS  
Video Adjust  
Audio DRC  
Add to HMG Playlist  
Audio  
Subtitle  
2
Select and set the item.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
23  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Erasing the additional  
data from BD-ROMs  
Switching the video  
output terminal  
03  
When a BD-ROM is played, additional data may be stored in the  
player’s memory (local storage).  
Use the procedure below to switch the video output terminal. Switch  
between the digital output (HDMI output) and the analog output  
(Component Video output, S-Video output or Video output).  
If the message indicating low memory (local storage) appears, erase  
the BDMV data.  
Switch the terminal from which the video signals are  
output.  
Caution  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
• When the BDMV data is erased, all the data of secondary video  
(Picture-in-Picture), secondary audio and/or bookmark, etc. that  
has been stored is erased.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
1
Display the Tools menu.  
TOOLS  
TOP MENU  
With no disc loaded, press the  
TOOLS button.  
The video output terminal switches each time the button is pressed.  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
Caution  
TOOLS  
TOP MENU  
• The picture may not be displayed for a while when the video  
output terminal is switched.  
ENTER  
• When the HDMI OUT terminal is selected, no video signals are  
output from the other video output terminals.  
BD PLAYER  
• When a video output terminal other than the HDMI OUT  
terminal is selected, no video signals are output from the HDMI  
OUT terminal. However, audio signals are output.  
Output Video Resolution  
BDMV Data Erase  
TOOLS  
2
Select and set the item.  
Use /to select BDMV Data Erase, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
3
Erase the data.  
Use /to select Yes, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
Erases all of the data  
added from BDMV.  
Please wait a while.  
OK to erase data?  
Yes  
No  
Caution  
• It takes time to erase the BDMV data for a while. Do not unplug  
the power cord for about 10 seconds after performing the above  
procedure.  
24  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching the output  
video resolution  
Caution  
03  
• On some TVs, the picture may not be displayed properly when  
the resolution is switched. If this happens, use OUTPUT  
RESOLUTION to set to a resolution at which the picture is  
properly displayed.  
Use the procedure below to switch the output video resolution from  
the various video output terminals.  
• When video signals are being output with a resolution of 1080/  
60i, 1080/60p, 1080/24p or 720/60p from the HDMI output  
terminal or component video output terminals, the picture may  
be output with an aspect ratio of 16:9, even if the TV Aspect  
Ratio is set to 4:3 (Standard).  
Press OUTPUT RESOLUTION.  
CLEAR  
ENTER  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
• The picture may not be displayed for a while when the resolution  
is switched.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
About Film material  
The film material is a video signal with a frame rate of 24 frames/  
second. For example, these materials include 1080/24p, 720/24p,  
etc.  
The current output video resolution is displayed on the TV screen  
and on the player’s front panel display.  
When pressed again, the output video resolution switches.  
Video resolution of the  
currently playing disc  
Example:  
Video resolution of the  
currently playing disc  
Example:  
ꢀ
Auto  
ꢁ
Source : 1080/24p  
Output Video Resolution  
ꢀ
Auto  
ꢁ
Source : 1080/60i  
Output Video Resolution  
Current Output : 1080/24p  
Current Output : 1080/60i  
Output video resolution  
from the player  
Output video resolution  
from the player  
To output film material  
The output video resolution can also be switched using /.  
To output 1080/24p film material from the HDMI output terminal, set  
the output video resolution to either Auto or Source Direct.  
The output video resolution can also be switched by pressing  
RESOLUTION on the player’s front panel.  
The output video resolution can also be switched by selecting  
Output Video Resolution from the TOOLS menu.  
Caution  
The output video resolution depends on the video output terminal.  
See the table below.  
• 1080/24p signals can only be output from the HDMI OUT  
terminal. They cannot be output from other video terminals.  
Output  
video  
resolution  
setting  
HDMI OUT  
terminal  
COMPONENT  
VIDEO output  
S-VIDEO/VIDEO  
output terminal  
• When Auto is selected, the picture is output at 60 frames/  
second if your TV is not compatible with 1080/24p signals.  
1
1
terminals  
• When Source Direct is selected, the signals are output as such,  
even if your TV is not compatible with 1080/24p signals. If the  
picture is not displayed properly, use OUTPUT RESOLUTION to  
set to the output video resolution at which the picture is properly  
displayed.  
2
Resolution  
—
—
Auto  
3,4  
preferred by TV  
480i  
480/60i  
480/60p  
1080/60i  
480/60i  
480/60p  
480/60i  
480p  
1080i  
• 720/24p video signals are output at 60 frames/second, even if  
the resolution is set to Auto or Source Direct.  
5
1080/60i  
2
6
—
—
1080p  
1080/60p  
Source  
Direct  
Resolution  
Resolution  
480/60i  
recorded on  
recorded on  
3,7,8  
7,8,9  
disc  
disc  
1. Depending on the BD, the pictures may not be output.  
2. Cannot be selected when the video signals are being output from the  
COMPONENT VIDEO output terminals, S-VIDEO output terminal or the VIDEO  
output terminal.  
3. For details on the output of film material (1080/24p or 720/24p video signals),  
see To output film material.  
4. Sources with a resolution of 720/60p and 720/24p are output at 1080/60i, even  
if the TV’s recommended resolution is 1080/60p.  
5. DVD-Video or DVD VR format is output at 480/60p. BDs format may be output  
at 480/60p.  
6. Depending on the connected HDMI cable, the video signals may not be output.  
Also, sources with a resolution of 720/60p and 720/24p are output at 1080/60i.  
7. Depending on the connected TV, the video signals may not be output.  
8. 720/24p film material is output at 720/60p.  
9. 1080/24p film material is output at 1080/60i.  
25  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CPhlaapteyr b4 ack  
04  
Resuming playback from where it was  
stopped (resume playback function)  
Playing discs or files  
• When STOP is pressed during playback, the point at which  
the disc stopped is stored in the memory. When PLAY is  
pressed, playback resumes from that point.  
This section describes the player’s main operations.  
For the types of discs that can be played, see Playable discs on  
page 8. For the types of files that can be played, see Playable files on  
page 10. Music files recorded on discs are played with Home Media  
Gallery (page 34).  
• For CDs and music files, playback starts from the beginning of  
the track/file that was playing.  
• To cancel the resume playback function, press STOP while  
playback is stopped.  
1
Press STANDBY/ON to turn on the power.  
Turn the TV’s power on and switch its input beforehand.  
STANDBY/ON  
OPEN/CLOSE  
Note  
• The resume playback function is canceled automatically in the  
following cases:  
TV CONTROL  
INPUT  
SELECT  
CH  
VOL  
– When the disc tray is opened.  
– When the file list window is switched.  
2
disc.  
Press OPEN/CLOSE to open the disc tray and load the  
– When the power is turned off. (For BDs and DVDs this does  
not cancel the resume playback function.)  
• The resume playback function cannot be used for some discs.  
STANDBY/ON  
OPEN/CLOSE  
TV CONTROL  
Forward and reverse scanning  
INPUT  
SELECT  
CH  
VOL  
BD  
DVD  
AVCHD  
CD  
Music files  
Note  
• Load the disc with the printed side facing up.  
• Several dozen seconds are required to read the disc.  
Once reading is completed, the type of disc is  
displayed on the player’s front panel display.  
1
During playback, press or .  
PLAY  
3
Press PLAY to play the disc.  
PREV  
PAUSE  
STOP  
NEXT  
PLAY  
PREV  
RED  
PAUSE  
GREEN  
STOP  
BLUE  
NEXT  
• The scanning speed switches each time the button is pressed.  
The speed steps depend on the disc or file (the speed is  
displayed on the TV screen).  
YELLOW  
• Forward or reverse scanning is also possible by holding the  
button down. Normal playback resumes when the button is  
released.  
To pause, press PAUSE during playback.  
To stop, press STOP during playback.  
Note  
Note  
• Some discs start playing automatically when the disc tray is  
closed.  
• No sound is output when scanning BDs and DVDs.  
• Sound is output when scanning CDs and music files.  
• DVD-Video discs have parental lock features. Input the  
password registered in the player’s settings to unlock the  
parental lock. For details, see page 46.  
• For some discs, normal playback resumes automatically when  
the chapter switches.  
• For some BD-R/RE, playback protection is set for the disc or  
titles. Input the code number set for the disc to unlock the  
protection.  
To resume normal playback  
Press PLAY.  
If the disc menu is displayed  
For some discs, the disc menu is displayed automatically when  
playback starts. The contents of the disc menu and the way to  
operate differ from disc to disc.  
26  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing specific titles, chapters or Playing in slow motion  
04  
tracks  
BD  
DVD  
AVCHD  
CD  
Music files  
BD  
DVD  
AVCHD  
CD  
Music files  
While playback is paused, press and hold / or /.  
Input the number of the title, chapter or track you want to  
play.  
• Use the number buttons (0 to 9) to input the number, then press  
ENTER.  
PLAY  
PREV  
PAUSE  
STOP  
NEXT  
• The speed switches each time the button is pressed (the speed  
is displayed on the TV screen). The speed steps depend on the  
disc.  
Note  
CLEAR  
ENTER  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
• It is not possible to switch the speed during reverse slow motion  
playback.  
• No sound is output during slow motion playback.  
Note  
• For some discs, normal playback resumes automatically when  
the chapter switches.  
• For some discs, it is not possible to specify and play titles,  
chapters or tracks.  
• There are some discs for which slow motion playback is not  
possible.  
• Press CLEAR to clear the values you have input.  
To resume normal playback  
Skipping content  
Press PLAY.  
BD  
DVD  
AVCHD  
CD  
Music files  
Step forward and step reverse  
BD  
Press PREV or NEXT.  
DVD  
AVCHD  
CD  
Music files  
PLAY  
PREV  
RED  
PAUSE  
GREEN  
STOP  
BLUE  
NEXT  
While playback is paused, press / or /.  
YELLOW  
• When NEXT is pressed, the disc skips ahead to the  
PLAY  
beginning of the next title/chapter/track/file.  
PREV  
PAUSE  
STOP  
NEXT  
• When PREV is pressed, the disc skips back to the  
beginning of the currently playing title/chapter/track/file. Press  
twice to skip back to the beginning of the previous title/chapter/  
track/file.  
• The disc moves a step forward or reverse each time the button  
is pressed.  
Note  
Note  
• For some discs, normal playback resumes automatically when  
the chapter switches.  
• There are some discs and files for which skipping is not  
possible.  
• There are some discs and files for which step forward/reverse  
playback is not possible.  
To resume normal playback  
Press PLAY.  
27  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• The subtitles can also be switched using /.  
Switching the camera angles  
04  
• The subtitles can also be switched by selecting Subtitle from  
the TOOLS menu.  
For BD-ROM and DVD-Video discs on which multiple angles are  
recorded, the angles can be switched during playback.  
Note  
BD  
• The types of recorded subtitles depend on the disc.  
DVD  
AVCHD  
CD  
Music files  
• If the subtitles are not switched when SUBTITLE is pressed,  
switch them from the menu screen.  
During playback, press ANGLE.  
INPUT  
SELECT  
Turning the subtitles off  
CH  
VOL  
Press SUBTITLE, then press CLEAR.  
FL DIMMER  
AUDIO SUBTITLE ANGLE  
Switching the audio streams/  
channels  
• The current angle and total number of recorded angles are  
displayed on the TV screen and on the player’s front panel  
display. When pressed again, the angle switches.  
For discs on which multiple audio streams/channels are recorded,  
audio streams/channels can be switched during playback. Also use  
this procedure to switch the secondary audio for BD-ROMs on  
which secondary audio is recorded.  
Current angle/Total number of  
recorded angles  
Example:  
ꢀ
1/4  
ꢁ
Angle  
BD  
DVD  
AVCHD  
CD  
Music files  
• The angles can also be switched using /.  
• The angles can also be switched by selecting Angle from the  
TOOLS menu.  
During playback, press AUDIO.  
• To switch the secondary audio, press SECONDARY AUDIO.  
• Angle mark  
is displayed for scenes at which multiple  
angles are recorded.  
FL DIMMER  
AUDIO SUBTITLE ANGLE  
Note  
• For some discs, the angle can also be switched on the menu  
screen.  
• Angle mark  
is set to Off (page 42).  
is not displayed if Angle/Secondary Indicator  
CLEAR  
ENTER  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
Switching the subtitles  
VIDEO SELECT PLAY MODE  
• The current audio stream/channel and total number of recorded  
audio streams/channels are displayed on the TV screen and on  
the player’s front panel display. When pressed again, the audio  
stream/channel switches.  
For discs on which multiple subtitles are recorded, the subtitles can  
be switched during playback.  
BD  
DVD  
AVCHD  
CD  
Music files  
Current audio stream/Total number  
of recorded audio streams  
Example:  
ꢀ
Audio  
During playback, press SUBTITLE.  
INPUT  
SELECT  
2/2 English  
Dolby True HD  
96kHz 7.1ch L C R Ls Rs Lb Rb LFE  
CH  
VOL  
ꢁ
FL DIMMER  
AUDIO SUBTITLE ANGLE  
Number of  
channels  
Channels recorded  
on disc  
Audio type  
• The audio streams/channels can also be switched using /.  
• The current subtitle and total number of recorded subtitles are  
displayed on the TV screen and on the player’s front panel  
display. When pressed again, the subtitle switches.  
• The audio streams/channels can also be switched by selecting  
Audio or Secondary Audio from the TOOLS menu.  
• Secondary audio mark  
is displayed for scenes at which  
Current subtitle/Total number of  
recorded subtitles  
Example:  
secondary audio is recorded.  
ꢀ
1/2 English  
ꢁ
Subtitle  
28  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Displaying the disc information  
04  
Note  
• The types of recorded audio streams/channels depend on the  
disc.  
BD  
DVD  
AVCHD  
CD  
Music files  
• If the audio stream/channel is not switched when AUDIO is  
pressed, switch it from the menu screen.  
• Some BD-ROMs do not include secondary audio.  
Press DISPLAY.  
• Secondary audio mark  
is not displayed if Angle/  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
Secondary Indicator is set to Off (page 42).  
DISPLAY POPUP MENU  
MENU  
Switching the secondary video  
TOOLS  
TOP MENU  
Use the procedure below to switch the secondary video (Picture-in-  
Picture) recorded on the BD-ROM.  
The disc information appears on the TV screen. The information  
switches each time the button is pressed.  
BD  
DVD  
AVCHD  
CD  
The information display differs during playback and when playback  
is stopped.  
Music files  
Using the Play Mode  
functions  
During playback, press SECONDARY VIDEO.  
CLEAR  
ENTER  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
Playing from a specific time (Time  
Search)  
DISPLAY POPUP MENU  
• The current secondary video stream and total number of  
recorded secondary video streams are displayed on the TV  
screen and on the player’s front panel display. When pressed  
again, the secondary video stream switches.  
1
During playback, press PLAY MODE to display the Play  
Mode screen.  
Current secondary video stream/Total number  
of recorded secondary video streams  
Example:  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
ꢀ
Secondary Video  
1/4  
ꢁ
DISPLAY POPUP MENU  
MENU  
TOOLS  
TOP MENU  
• The secondary video streams can also be switched using /.  
• The secondary video streams can also be switched by selecting  
Secondary Video from the TOOLS menu.  
The Play Mode screen can also be displayed by selecting Play Mode  
from the TOOLS menu.  
• Secondary video mark  
secondary video is recorded.  
is displayed for scenes at which  
2
Select Time Search.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
Note  
• Some BD-ROMs do not include secondary video.  
ENTER  
• Secondary video mark  
Indicator is set to Off (page 42).  
is not displayed if Angle/Secondary  
HOME  
MENU  
RETURN  
Play Mode  
Time Search  
Title Search  
Chapter Search  
A-B Repeat  
Repeat/Random  
29  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Input the time.  
2
Select the type of search.  
04  
Use the number buttons (0 to 9) or /to input the time.  
Use /to select, then press ENTER.  
Use /to move the cursor.  
See the table on page 33 for the search types.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
CLEAR  
ENTER  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
Play Mode  
DISPLAY POPUP MENU  
MENU  
Time Search  
Title Search  
Chapter Search  
A-B Repeat  
TOOLS  
TOP MENU  
Repeat/Random  
ENTER  
HOME  
MENU  
3
Input the number.  
RETURN  
Use the number buttons (0 to 9) or /to input the number.  
Use /to move the cursor.  
Time Search  
1
2
:
4
5
:
0
0
Search  
CLEAR  
ENTER  
Note  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
• To play from 45 minutes, input 0, 0, 4, 5, 0 and 0, then press  
ENTER.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
• To play from 1 hour 20 minutes, input 0, 1, 2, 0, 0 and 0, then  
press ENTER.  
TOOLS  
TOP MENU  
• Press CLEAR to clear the values you have input.  
4
Starting playback from the specified time.  
ENTER  
Use /to select Search, then press ENTER.  
HOME  
MENU  
RETURN  
To cancel Time Search  
Press PLAY MODE or  
RETURN.  
Note  
Title  
Title Search  
0
3
2
Search  
• There are some discs for which Time Search is not available.  
4
Starting playback from the specified title, chapter or track.  
Playing a specific title, chapter or  
track (Search)  
Use /to select Search, then press ENTER.  
To cancel the search  
1
Press PLAY MODE to display the Play Mode screen.  
Press PLAY MODE or  
RETURN.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
Note  
DISPLAY POPUP MENU  
MENU  
• To search for title 32, input 0, 3 and 2, then press ENTER.  
• There are some discs for which searching is not available.  
• Press CLEAR to clear the values you have input.  
TOOLS  
TOP MENU  
The Play Mode screen can also be displayed by selecting Play Mode  
from the TOOLS menu.  
30  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a specific section within a Playing repeatedly (Repeat Play)  
04  
title or track repeatedly (A-B  
Use this procedure to play the currently playing disc, title, chapter,  
Repeat)  
track or file repeatedly.  
1
During playback, press PLAY MODE to display the Play  
Use this procedure to play a specific section within a title or track  
repeatedly.  
Mode screen.  
1
During playback, press PLAY MODE to display the Play  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
Mode screen.  
DISPLAY POPUP MENU  
MENU  
TOOLS  
TOP MENU  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
The Play Mode screen can also be displayed by selecting Play Mode  
MENU  
from the TOOLS menu.  
TOOLS  
TOP MENU  
2
Select Repeat/Random.  
The Play Mode screen can also be displayed by selecting Play Mode  
from the TOOLS menu.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
2
Select A-B Repeat.  
Use /to select, then press ENTER.  
ENTER  
Play Mode  
HOME  
MENU  
RETURN  
Time Search  
Title Search  
Chapter Search  
A-B Repeat  
Play Mode  
Repeat/Random  
Time Search  
Title Search  
Chapter Search  
A-B Repeat  
3
Select the starting point for A-B Repeat.  
Use /to select A (Start), then press ENTER.  
Repeat/Random  
3
Select the type of Repeat Play.  
A-B Repeat  
A (Start)  
B (End)  
Off  
Use /to select, then press ENTER.  
See the table on page 33 for the types of repeat playback.  
4
Select the end point for A-B Repeat.  
Repeat/Random  
Use /to select B (End), then press ENTER.  
A-B Repeat playback starts.  
Off  
Repeat All  
Repeat Track  
Random Track  
To cancel A-B Repeat play  
• Select Off from the Repeat/Random screen, then press ENTER.  
• During playback, press STOP or CLEAR.  
To cancel Repeat Play  
• Select Off from the Repeat/Random screen, then press ENTER.  
Note  
• A-B Repeat play is canceled in the following cases:  
• During playback, press STOP or CLEAR.  
– When the angle is switched (for BD-ROM and DVD-Video  
discs only).  
Note  
– When you search outside the repeat range.  
– When you start other repeat or random play.  
• There are some discs and files for which Repeat Play is not  
available.  
• The type of repeat modes depends on the disc and file being  
played. See the table on page 33.  
• Repeat Play is canceled in the following cases:  
– When the angle is switched (for BD-ROM and DVD-Video  
discs only).  
– When you search outside the repeat range.  
– When you start other repeat or random play.  
31  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing in random order (Random  
Play)  
04  
Use this procedure to play the tracks or files in random order.  
1
During playback, press PLAY MODE to display the Play  
Mode screen.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
TOOLS  
TOP MENU  
The Play Mode screen can also be displayed by selecting Play Mode  
from the TOOLS menu.  
2
Select Repeat/Random.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
Play Mode  
Time Search  
Title Search  
Chapter Search  
A-B Repeat  
Repeat/Random  
3
Select the Random Play.  
Use /to select, then press ENTER.  
Repeat/Random  
Off  
Repeat All  
Repeat Track  
Random Track  
To cancel Random Play  
• Select Off from the Repeat/Random screen, then press ENTER.  
• During playback, press STOP or CLEAR.  
Note  
• There are some discs and files for which Random Play is not  
available.  
• Random Play is canceled in the following cases:  
– When you use the search function.  
– When you start repeat play.  
32  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About Play Mode types  
04  
The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the  
usable functions on the table below.  
Disc/file type  
DVD-R  
DVD-RW  
(VR format)  
1
Play Mode type  
Mark  
DVD-  
BD-R  
BD-RE  
2
AVCHD  
Music file  
CD  
BD-ROM  
2
Video  
Playing a specific section within a title or  
track repeatedly (A-B Repeat)  
Playing a title repeatedly (Title Repeat)  
Playing a chapter repeatedly (Chapter  
Repeat)  
Playing a track or file repeatedly (Track  
Repeat)  
Playing all the titles, tracks or files on the  
disc repeatedly (All Repeat)  
3
4
Playing the tracks or files in random order  
(Random Track)  
Playing from a specific time (Time Search)  
Playing a specific title (Title Search)  
—
—
Playing a specific chapter (Chapter  
Search)  
—
—
Playing a specific track (Track Search)  
1. During playback in a Play Mode, the type of Play Mode is indicated by the mark.  
2. For BD-ROM and DVD-Video discs, some of the functions cannot be used with some titles.  
3. The original titles are played repeatedly. However, the playlist titles cannot be played repeatedly.  
4. The files in the folder or HMG Playlist are played repeatedly.  
33  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Select the title or track to be played.  
Playing from the Home  
Media Gallery  
04  
Use /to select, then press ENTER.  
BD-R BDAV  
My Favorite TV Program  
1 Morning serial drama  
2 News at noon  
3 Evening movie  
4 Midnight variety show  
5 Playback protection  
6 World heritage  
7 Drama: Blank time  
8 Music and us  
The Home Media Gallery lets you display a list of the titles, tracks or  
files recorded on the disc. The discs that can be played from the  
Home Media Gallery are as shown below (see also page 8).  
• BD-R/-RE discs  
• DVDs recorded in VR format  
• Music CDs (CD-DAs and DTS-CDs)  
10 items  
Title Total : 0 h 54 m 30 s  
Recording Date :  
Original  
11/11/2008  
• DVDs/CDs on which only data files of music files, etc. are  
recorded  
Playback starts.  
Closing the Home Media Gallery  
Playing discs  
Press HOME MEDIA GALLERY (or  
HOME MENU).  
1
Press HOME MEDIA GALLERY to display the Home Media  
Note  
Gallery.  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
• When playing a music CD (CD-DA or DTS-CD), the Now Playing  
screen is displayed.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
• Some BD-R/-RE discs have playback protection. To cancel the  
protection, input the password set for the disc.  
DISPLAY POPUP MENU  
MENU  
• To play DVD-R/-RW (VR format) playlists, switch to the playlist  
using the Original/Play List command on the TOOLS menu  
(page 23).  
TOOLS  
TOP MENU  
The Home Media Gallery can also be displayed by selecting Home  
Media Gallery from Home Menu then pressing ENTER.  
Playing music files  
2
Select the disc.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
1
Press HOME MEDIA GALLERY to display the Home Media  
Gallery.  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
ENTER  
HOME  
MENU  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
RETURN  
DISPLAY POPUP MENU  
MENU  
TOOLS  
TOP MENU  
Home Media Gallery  
BD PLAYER  
The Home Media Gallery can also be displayed by selecting Home  
BD-R BDAV  
HMG Playlist  
Media Gallery from Home Menu then pressing ENTER.  
2
Select the disc.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
Search for the part you want to play from a list of the disc's content.  
ENTER  
HOME  
MENU  
RETURN  
Home Media Gallery  
BD PLAYER  
CD-ROM  
HMG Playlist  
Search for the part you want to play from a list of the disc's content.  
34  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Select Music.  
Playback starts. The Now Playing screen (shown below) is displayed.  
04  
Press ENTER.  
Currently playing  
file  
CD-ROM  
Music 001.mp3  
Play 0.02.33  
0.05.34  
Music  
DATA DISC  
Total file playing  
time  
Elapsed time  
View available music.  
4
Select Folders or All Songs.  
Use /to select, then press ENTER.  
Playing in the desired order (HMG  
Playlist)  
• Folders – The files in the selected folder are displayed.  
• All Songs – All the recorded files are displayed.  
Music  
CD-ROM  
The discs that can add tracks and files to the HMG (Home Media  
Gallery) Playlist are as shown below.  
Folders  
All Songs  
• Music CDs (CD-DAs and DTS-CDs)  
• DVDs/CDs on which music files are recorded  
Adding tracks/files  
Use this procedure to add tracks and files, and create the HMG  
Playlist.  
1
Press HOME MEDIA GALLERY to display the Home Media  
Gallery.  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
If you have selected All Songs, proceed to step 6.  
5
Select the folder containing the file you want to play.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
Use /to select, then press ENTER.  
DISPLAY POPUP MENU  
MENU  
Folders  
TOOLS  
TOP MENU  
CD-ROM/Music  
Music Folder001  
Music Folder002  
Music Folder003  
Music Folder004  
Music005.mp3  
Music006.mp3  
Music007.mp3  
Music008.mp3  
The Home Media Gallery can also be displayed by selecting Home  
Media Gallery from Home Menu pressing ENTER.  
2
Select the disc.  
Load the disc beforehand.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
15 items  
A list of the files and/or the sub-folders in the selected folder is  
displayed.  
ENTER  
HOME  
MENU  
RETURN  
6
Select and set the file you want to play.  
Use /to select, then press ENTER.  
Home Media Gallery  
Music Folder001  
CD-ROM/Music/Folders  
BD PLAYER  
CD-ROM  
Music001.mp3  
Music002.mp3  
Music003.mp3  
Music004.mp3  
Music005.mp3  
Music006.mp3  
Music007.mp3  
Music008.mp3  
HMG Playlist  
Search for the part you want to play from a list of the disc's content.  
20 items  
35  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Select the track/file to be added.  
The Home Media Gallery can also be displayed by selecting Home  
Media Gallery from Home Menu pressing ENTER.  
04  
Use /to select.  
2
Select HMG Playlist.  
Folders  
CD-ROM/Music  
Use /to select, then press ENTER.  
Music001.mp3  
Home Media Gallery  
Music002.mp3  
Music003.mp3  
Music004.mp3  
Music005.mp3  
Music006.mp3  
Music007.mp3  
Music008.mp3  
BD PLAYER  
CD-ROM  
HMG Playlist  
15 items  
Display the HMG Playlist.  
4
5
Press  
TOOLS to display the TOOLS menu.  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
3
Select the track/file to be played.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
HMG Playlist  
CD-ROM  
ENTER  
1 Track15.mp3  
2 Track07.mp3  
3 Track03.mp3  
4 Track16.mp3  
5 Track08.mp3  
6 Track05.mp3  
7 Track10.mp3  
8 Track03.mp3  
Select Add to HMG Playlist.  
Use /to select, then press ENTER.  
Folders  
CD-ROM/Music  
Music001.mp3  
Music002.mp3  
Music003.mp3  
Music004.mp3  
Music005.mp3  
21 items  
Playback starts. The Now Playing screen (shown below) is displayed.  
BD PLAYER  
Currently playing  
track/file  
TOOLS  
Play from Beginning  
Add to HMG Playlist  
Now Playing  
Music 001.mp3  
Play 0.02.33  
0.05.34  
HMG  
DATA DISC  
Total track/file  
playing time  
Elapsed time  
The track or file selected in step 3 is added to the HMG Playlist.  
To add more tracks or files, repeat steps 3 to 5.  
To add the currently playing track/file to  
the HMG Playlist  
While the track/file is playing, press  
TOOLS to display  
the TOOLS menu.  
Press STOP to stop playback. When a music CD is stopped, the  
Now Playing screen turns off. When a music file is stopped, the  
HMG Playlist screen reappears.  
Use /to select Add to HMG Playlist, then press ENTER.  
Note  
Deleting tracks/files from the HMG Playlist  
• A maximum of 24 tracks/files can be added to the HMG Playlist.  
• The HMG Playlist is cleared in the following cases:  
– When the power is turned off.  
Select the track/file to be deleted, then press  
TOOLS to  
display the TOOLS menu.  
– When the disc tray is opened.  
Use /to select Delete from HMG Playlist, then press  
ENTER.  
Playing the HMG Playlist  
1
Press HOME MEDIA GALLERY to display the Home Media  
Gallery.  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
36  
TOOLS  
TOP MENU  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5  
05  
Adjusting audio and video  
2
Select the item to be adjusted.  
Adjusting the video  
Use /to select.  
Video Adjust [ Memory1 ]  
The quality of the playback picture can be adjusted according to the  
TV you are using.  
Prog. Motion  
Pure Cinema  
Motion  
Still  
Auto1  
1
During playback, press VIDEO ADJUST to display the Video  
Off  
Off  
Off  
Off  
Max  
Max  
Max  
Max  
YNR  
Adjust screen.  
CNR  
RED  
GREEN  
BLUE  
YELLOW  
BNR  
MNR  
1/2 Page  
VIDEO ADJUST  
Use [  
][  
] to adjust the picture to progressive scan.  
The Video Adjust screen can also be displayed by selecting Video  
Adjust from the TOOLS menu.  
3
Adjust the picture quality.  
When /are pressed, the adjustments can be made watching  
the picture. The detailed settings screen reappears when ENTER is  
pressed.  
2
Select a preset.  
TOOLS  
TOP MENU  
Prog. Motion  
Motion  
Still  
ENTER  
• Prog.Motion – Adjust according to the type of image (movie or  
still image). This is effective when outputting video materials as  
progressive images.  
HOME  
MENU  
RETURN  
• Pure Cinema – This setting optimizes the operation of the  
progressive scanning circuit for playing film materials. Normally  
set it to Auto1. If the picture seems unnatural, switch this to  
Auto 2, On or Off (page 38).  
Select using /according to the TV being used.  
Video Adjust  
PDP  
Adjustments  
• YNR – Reduces noise in the luminance (Y) signal.  
• CNR – Reduces noise in the chroma (C) signal.  
• LCD – Select this when connected to a liquid crystal display TV.  
• BNR – Reduces the block noise (block-shaped distortion  
generated upon MPEG compression).  
• PDP – Select this when connected to a plasma TV of another  
brand.  
• MNR – Reduces the mosquito noise (distortion along the  
contours of the picture generated upon MPEG compression).  
• Pioneer PDP – Select this when connected to a Pioneer plasma  
TV.  
• Detail – Emphasizes the picture’s contours.  
• Projector – Select this when connected to a front projector.  
• White Level – Adjusts the level of the white portions.  
• Black Level – Adjusts the level of the black portions.  
• Professional – With this setting, video signal processing is  
restrained. Select this when connected to a professional  
monitor.  
• Black Setup – Select the black level as the setup level. Normally  
select 7.5 IRE. If the black level is too bright due to the  
combination with the connected monitor, select 0 IRE.  
• Memory1 to 3 – Picture quality settings with adjusted  
parameters can be stored in the memory. For a description of  
the parameters, see When Memory1, 2 or 3 is selected below.  
• Gamma Correction – Adjusts how the dark portions of the  
picture look.  
When Memory1, 2 or 3 is selected  
• Hue – Adjusts the balance between green and red.  
• Chroma Level – Adjusts the density of the colors.  
1
Select Adjustments.  
Use to select Adjustments, then press ENTER.  
A detailed settings screen appears.  
Note  
• Prog.Motion and Pure Cinema have the effect only for pictures  
recorded in the interlaced scan format (480i or 1080i signals).  
• Prog.Motion is disabled when Pure Cinema is set to On.  
• Black Setup have the effect only for pictures output from the  
VIDEO and S-VIDEO output terminals.  
• YNR, CNR, BNR and MNR are disabled when 1080/24p signals  
are output from the HDMI OUT terminal.  
37  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Closing the Video Adjust screen  
Closing the Audio DRC screen  
05  
Press  
HOME MENU.  
Press ENTER or  
HOME MENU.  
About Pure Cinema  
There are two types of video signals:  
Note  
• This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby  
Digital audio signals of BDs and DVDs.  
• Video material – Video signals recorded at 30 frames/second  
• Film material – Video signals recorded at 24 frames/second  
• When Auto is selected, the setting has the same effect as High  
or Off for Dolby TrueHD signals, depending on the content. For  
Dolby Digital Plus and Dolby Digital, the setting has the same  
effect as Off.  
“Pure Cinema” uses signal processing suited for “film material”  
when converting 480i or 1080i interlaced video signals into  
progressive video signals, resulting in clear picture reproduction  
without losing the quality of the material.  
• Audio DRC affects the audio signals output from the following  
audio output terminals:  
is displayed on the disc information screen when playing the  
“film material” pictures of DVD-Video discs (page 29).  
– Analog audio signals output from the AUDIO OUT (2 ch) or  
AUDIO OUT (7.1 ch) terminals.  
– Linear PCM audio signals output from the DIGITAL OUT  
terminals or HDMI OUT terminal.  
Adjusting the Audio DRC  
• The effect may be weak for some discs.  
Audio DRC (Dynamic Range Control) has the effect of playing loud  
sounds softly and soft sounds loudly. Adjust the setting for example  
when watching movies late at night and the dialogs are difficult to  
hear.  
1
During playback, display the TOOLS menu.  
Press TOOLS.  
HOME MEDIA  
GALLERY  
DISPLAY POPUP MENU  
MENU  
TOOLS  
TOP MENU  
ENTER  
2
Select and set Audio DRC.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
BD PLAYER  
TOOLS  
Audio  
Subtitle  
Audio DRC  
Video Adjust  
Output Video Resolution  
3
Adjust the setting.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
Use /to switch between Off, Low, Medium, High and Auto.  
Audio DRC  
Off  
Adjust the audio dynamic range. This setting is  
ineffective depending on the playing audio.  
38  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
06  
Advanced settings  
Changing the settings  
(Initial Setup)  
Operating the Initial Setup screen  
1
When playback is stopped, display the Home Menu screen.  
Press HOME MENU.  
ENTER  
HOME  
MENU  
RETURN  
PLAY  
2
Select and set Initial Setup.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
HOME MENU  
BD PLAYER  
Home Media Gallery  
Initial Setup  
Set up the player for use.  
3
Select the item and change the setting.  
Use ///to select, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
Closing the Initial Setup screen  
Press  
HOME MENU.  
39  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
06  
Note  
• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status.  
• The factory default settings are indicated in bold.  
Setting  
Options  
Explanation  
TV Aspect Ratio  
16:9 (Widescreen)  
4:3 (Standard)  
Full  
Select this when connected to a wide (16:9) TV.  
Select this when connected to a conventional TV.  
4:3 pictures are displayed over the entire screen.  
4:3 Video Out  
Normal  
4:3 pictures are displayed with black bands along the sides. Select this when you cannot  
switch the aspect ratio to 4:3 on the TV.  
DVD 16:9 Video Out  
Letter Box  
16:9 pictures are displayed with black bands at the top and bottom when watching on a 4:3  
screen.  
Pan & Scan  
The picture is displayed over the entire screen, with the left and right sides of the 16:9  
picture cut off. Select this to watch 4:3 pictures over the entire screen.  
Still Picture  
Field  
This eliminates instability of the picture when playback is paused.  
Frame  
This makes pictures clear when playback is paused, but instability may be observed.  
Field and Frame is selected automatically according to the disc being played.  
Auto  
Dolby Digital Out  
Dolby Digital 1  
Dolby Digital audio signals are output. With BD-ROMs, the secondary audio and interactive  
audio are mixed for output.  
* Only valid for digital audio  
outputs.  
Dolby Digital 2  
Dolby Digital audio signals are output. With BD-ROMs, the signals are output without  
mixing the secondary audio and interactive audio signals.  
Dolby Digital PCM  
Select this when the connected AV receiver or amplifier, etc., is not compatible with Dolby  
Digital audio signals. The Dolby Digital audio signals are converted into linear PCM audio  
signals for output.  
DTS Out  
DTS 1  
DTS Digital Surround audio signals are output. With BD-ROMs, the secondary audio and  
interactive audio are mixed for output.  
* Only valid for digital audio  
outputs.  
DTS 2  
DTS Digital Surround audio signals are output. With BD-ROMs, the signals are output  
without mixing the secondary audio and interactive audio signals.  
DTS PCM  
Select this when the connected AV receiver or amplifier, etc., is not compatible with DTS  
Digital Surround audio signals. The DTS Digital Surround audio signals are converted into  
linear PCM audio signals for output.  
AAC Out  
AAC  
Select this when the connected AV receiver or amplifier, etc., is compatible with AAC audio  
signals. The AAC audio signals are output.  
* Only valid for digital audio  
outputs.  
AAC PCM  
Select this when the connected AV receiver or amplifier, etc., is not compatible with AAC  
audio signals. The AAC audio signals are converted into linear PCM audio signals for  
output.  
DTS Downmix  
Stereo  
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital  
Surround audio signals converted to linear PCM audio signals are converted into 2-channel  
(stereo) signals for output.  
Lt/Rt  
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital  
Surround audio signals converted to linear PCM audio signals are converted into 2-channel  
signals compatible with Dolby Surround for output (when the connected AV receiver or  
amplifier, etc., is compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the  
linear PCM audio signals as surround audio signals).  
Audio Output Mode  
2 Channel  
Select this when the TV’s analog 2-channel (stereo) audio input terminals are connected to  
the player’s AUDIO OUT (2 ch) terminals.  
* Only valid for analog audio  
outputs.  
Multi-channel  
Select this when the multi-channel audio input terminals of an AV receiver or amplifier, etc.,  
are connected to the player’s AUDIO OUT (7.1 ch) terminals.  
Speaker Setup  
When an AV receiver or amplifier, etc., is connected to the player’s AUDIO OUT (7.1 ch) terminals, this sets whether  
or not to use the speakers which are connected to the AV receiver or amplifier, as well as the size of the speakers. For  
details, see Changing the speaker setup on page 43.  
* Only valid for analog audio  
outputs.  
Channel Level  
Fix  
The output for the various speakers is set to the maximum.  
* Only valid for analog audio  
outputs.  
Variable  
The output level of the various speakers is set within the range of –6.0 dB to +6.0 dB (in 0.5  
dB steps) (page 44).  
40  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Options  
Explanation  
06  
HDMI High-Speed Transmission On  
Select this when connected with a High Speed HDMI™ cable (page 15).  
Select this when connected with a Standard HDMI™ cable (page 15).  
Off  
The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High-Speed Transmission setting.  
HDMI Color Space  
Auto  
The video signal that is output (YCbCr or RGB) is switched automatically.  
Select this to output the video signals as YCbCr 4:4:4 signals.  
Select this to output the video signals as YCbCr 4:2:2 signals.  
YCbCr 4:4:4  
YCbCr 4:2:2  
RGB (16 to 235)  
Select this to output the video signals as RGB signals. Choose this if the colors seem too  
dense and all the dark colors are displayed in a uniform black when RGB (0 – 255) is  
selected.  
RGB (0 to 255)  
Select this to output the video signals as RGB signals. Choose this if the colors seem too  
faint and the black seems too bright when RGB (16 – 235) is selected.  
Normally it is recommended to set this to Auto. When set to Auto, the optimum video signals for your TV are output.  
HDMI Audio Out  
Auto  
The signals are output with as many audio channels as possible. In cases when the number  
of channels does not decrease when the signals are output as such without converting  
them to linear PCM, they are output as such (page 50).  
PCM  
Select this when you want the secondary audio and interactive audio signals to be mixed  
for output or when you want to output prioritizing sampling frequency over the number of  
channels (page 50).  
PQLS  
Auto  
Off  
Enables PQLS function (page 15).  
Disables PQLS function (page 15).  
HDMI Control  
On  
Select this to control the player with the remote control of the AV device connected using  
an HDMI cable. Also refer to About HDMI Control function on page 15.  
Off  
Select this when you do not want to control the player with the remote control of the AV  
device connected using an HDMI cable.  
OSD Language  
Audio Language  
English  
Select this to set the language of the on-screen displays to English.  
available languages  
English  
Choose a language for the on-screen displays from the listed languages.  
Select this to set both the BD-ROM and DVD-Video default audio language to English.  
* For some discs, it may not be  
possible to change to the selected  
language.  
available languages  
Choose a language from the listed languages to set the default audio language for BD-ROM  
and DVD-Video playback.  
Other  
Continue to the next screen to set the default audio language for BD-ROM and DVD-Video  
playback. You can select the language name or enter the code number (see on page 56 for  
the code table). If a language not recorded on the BD/DVD is set, one of the recorded  
languages is automatically selected and played.  
Subtitle Language  
English  
Select this to set the default subtitle language for BD-ROM and DVD-Video playback to  
English.  
* For some discs, it may not be  
possible to change to the selected  
language.  
available languages  
Other  
Choose a language from the listed languages to set the default subtitle language for BD-  
ROM and DVD-Video playback.  
Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video  
playback. You can select the language name or enter the code number (see on page 56 for  
the code table). If a language not recorded on the BD/DVD is set, one of the recorded  
languages is automatically selected and played.  
BDMV/DVD-Video Menu Lang.  
w/Subtitle Language  
available languages  
Other  
Sets the language of BD-ROM and DVD-VIdeo menus to the same as that set for the subtitle  
language.  
* For some discs, it may not be  
possible to change to the selected  
language.  
Choose a language from the listed languages to set the default language for BD-ROM and  
DVD-Video menus.  
Continue to the next screen to set the default menu language for BD-ROM and DVD-Video  
menus. You can select the language name or enter the code number (see on page 56 for  
the code table). If a language not recorded on the BD/DVD is set, one of the recorded  
languages is automatically selected and played.  
Subtitle Display  
On  
Select this to display the subtitles.  
Off  
Select this if you do not want to display the subtitles. Note that on some discs the subtitles  
are displayed by force.  
Set Password (Change Password) Register (change) the password for parental lock settings or for unlocking to play DVD-Video with parental lock  
feature. For details, see Registering or Changing the password on page 44.  
DVD-Video Parental Lock  
BDMV Parental Lock  
Country Code  
Change the player’s parental lock level. For details, see Changing the Parental Lock level for watching DVDs on page 46.  
Change the restricted age. For details, see Changing the Age Restriction for watching BD-ROMs on page 45.  
Change the Country/Area code. Refer to the Changing the Country/Area code on page 47.  
41  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Options  
Explanation  
06  
Output Terminal Priority  
Select the terminals for outputting video and audio signals with priority. For details, see Changing the terminals for  
outputting video and audio signals (Output Terminal Priority) on page 48.  
On Screen Display  
On  
Select this to display the operation indicators (Play, Stop, etc.) on the TV screen.  
Off  
Select this if you do not want to display the operation indicators (Play, Stop, etc.) on the TV  
screen.  
Angle/Secondary Indicator  
On  
Select this to display the angle mark, secondary video mark and secondary audio mark on  
the TV screen (pages 28 and 29).  
Off  
Select this if you do not want to display the angle mark, secondary video mark and  
secondary audio mark on the TV screen.  
Hybrid Disc Playback  
BD  
The BD layer of hybrid discs with two or more layers (BD and DVD or CD) is played.  
DVD  
The DVD layer of hybrid discs with two or more layers (BD and DVD) is played. If there is no  
DVD layer, the BD layer is played.  
CD  
The CD layer of hybrid discs with two or more layers (BD and CD) is played. If there is no CD  
layer, the BD layer is played.  
BDMV/BDAV Playback Priority  
Auto Power Off  
BDMV  
BDAV  
On  
Select this to play the BDMV format on BD-R/RE discs containing both BDMV and BDAV  
formats.  
Select this to play the BDAV format on BD-R/RE discs containing both BDMV and BDAV  
formats.  
Select this to turn the power off automatically (the power turns off automatically if no  
operation is performed for over 30 minutes).  
Off  
Select this if you do not want the power to turn off automatically.  
Setup Navigator  
Start making the settings using the Setup Navigator menu. For details, see Making settings using the Setup Navigator  
menu on page 20.  
42  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Select and set Speakers.  
Changing to other language at  
language setting  
06  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
Note  
HOME  
MENU  
RETURN  
• Refer to Language Code Table on page 56.  
• If a language not recorded on the BD/DVD is set, one of the  
recorded languages is automatically selected and played.  
Initial Setup  
BD PLAYER  
1
Select and set Other.  
Use /to select, then press ENTER.  
Video Out  
Audio Out  
Speakers  
HDMI  
Audio Output Mode  
Speaker Setup  
Channel Level  
ꢀMulti-channel  
TOOLS  
TOP MENU  
ꢀFix  
Language  
Parental Lock  
Options  
ENTER  
HOME  
MENU  
RETURN  
Setup Navigator  
2
Change the language.  
2
Select and set Speaker Setup Next Screen.  
Use /to change, then press ENTER.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
Caution  
• This cannot be selected when Audio Output Mode is set to 2  
Channel. Change the setting to Multi-channel (page 40).  
ENTER  
HOME  
MENU  
RETURN  
3
Select the speaker and change the setting.  
Use /to select, then use /to change the setting.  
TOOLS  
TOP MENU  
To change the language using numbers  
1
Use /to select Number.  
ENTER  
2
Use the number buttons (0 to 9) to input the number, then  
HOME  
MENU  
RETURN  
press ENTER.  
Changing the speaker setup  
Speaker Setup  
BD PLAYER  
Set whether or not to use the speakers which are connected to the  
AV receiver or amplifier, as well as the size of the speakers. This  
setting is only valid for analog audio outputs.  
L/R  
Large  
Yes  
C
SL/SR  
SBL/SBR  
Yes  
Yes  
Note  
• Select Initial Setup from the Home Menu, then press ENTER.  
Use [  
][  
] to select a speaker, then press [  
to select speaker option.  
][  
]
• L/R (front left and right speakers): Small/Large (this setting also  
applies to the C, SL/SR and SBL/SBR speakers).  
• C (center speaker): Yes/No  
• SL/SR (left and right surround speakers): Yes/No  
• SBL/SBR (left and right surround back speakers): Yes/No  
Closing the speaker settings screen  
Press ENTER.  
43  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Auto – Switch the speaker to be adjusted automatically.  
Adjusting the output level of the  
various speakers (Channel Level)  
06  
• Manual – Switch the speaker to be adjusted manually.  
Caution  
Adjust each output level of the different speakers by using test  
tones.  
• Test tones are output. Lower the volume of the device connected  
to the player.  
1
Select and set Speakers.  
4
Adjust the output level.  
Use /to select, /to adjust.  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
Channel Level  
BD PLAYER  
L
C
R
SR  
SBR  
SBL  
SL  
SW  
0.0 dB  
0.0 dB  
0.0 dB  
0.0 dB  
0.0 dB  
0.0 dB  
0.0 dB  
0.0 dB  
ENTER  
HOME  
MENU  
RETURN  
Initial Setup  
BD PLAYER  
Use [  
][  
] to select a speaker, then press [  
][  
]
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
Audio Output Mode  
Speaker Setup  
ꢀMulti-channel  
to adjust the channel level and then press ENTER.  
Channel Level  
ꢀFix  
Note  
• When Auto is selected, the speaker cannot be selected with  
/.  
Setup Navigator  
Closing the Channel Level screen  
Press ENTER.  
2
Select and set Channel Level, then Fix or Variable.  
Use /to select, then press ENTER.  
Registering or Changing the  
password  
• Fix – The output level of all the speakers is set to the maximum.  
• Variable – The output level of all the speakers is set 6.0 dB lower  
than when Fix is selected. From this point, the output levels of  
the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted  
within the range of –6.0 dB to +6.0 dB.  
Use this procedure to register or change the code number required  
for the Parental Lock settings.  
• If you have selected Variable, proceed to step 3.  
BD  
DVD  
AVCHD  
CD  
Music files  
Caution  
• This cannot be selected when Audio Output Mode is set to 2  
Channel. Change the setting to Multi-channel (page 40).  
1
Select and set Parental Lock.  
Use /to select, then press ENTER.  
3
Select and set the method for switching the speaker to be  
adjusted.  
TOOLS  
TOP MENU  
Use /to select, then press ENTER.  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
ENTER  
HOME  
MENU  
RETURN  
Initial Setup  
BD PLAYER  
Speaker Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
Set Password  
DVD-Video Parental Lock  
BDMV Parental Lock  
Country Code  
ꢀOff  
ꢀ255  
ꢀus  
Video Out  
Audio Out  
Speakers  
HDMI  
Test Tone Switching  
Select whether test tone output is  
switched automatically or manually.  
Language  
Parental Lock  
Options  
Setup Navigator  
Auto  
Manual  
Setup Navigator  
2
Select and set Set Password Next Screen.  
Use /to select, then press ENTER.  
44  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Input the password.  
Changing the Age Restriction for  
watching BD-ROMs  
06  
Use the number buttons (0 to 9) or /to input the number, then  
press ENTER to set.  
Use /to move the cursor.  
For BD-ROMs containing scenes of violence, for example, watching  
can be restricted by setting an age restriction for the BD-ROMs.  
BD  
DVD  
Music files  
AVCHD  
CD  
CLEAR  
ENTER  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
1
Select and set Parental Lock.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
Use /to select, then press ENTER.  
DISPLAY POPUP MENU  
MENU  
TOOLS  
TOP MENU  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
ENTER  
RETURN  
HOME  
MENU  
RETURN  
Initial Setup  
BD PLAYER  
Initial Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
Set Password  
DVD-Video Parental Lock  
BDMV Parental Lock  
Country Code  
ꢀOff  
ꢀ255  
ꢀus  
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
Set Password  
Enter new password  
Language  
Parental Lock  
Options  
Setup Navigator  
Setup Navigator  
2
Select and set BDMV Parental Lock Next Screen.  
Use /to select, then press ENTER.  
4
Re-input the password.  
Use the number buttons (0 to 9) or /to input the number, then  
press ENTER to set.  
Use /to move the cursor.  
Initial Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
Set Password  
Enter new password  
Language  
Parental Lock  
Options  
Re-enter  
Setup Navigator  
To change the code number  
Input the previously registered password, then input the new  
password.  
Note  
• We recommend making a note of the password.  
• If you forget the password, reset the player to the factory default  
setting, then register the password again (page 49).  
45  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Input the password.  
Changing the Parental Lock level  
for watching DVDs  
06  
Use the number buttons (0 to 9) or /to input the number, then  
press ENTER to set.  
Use /to move the cursor.  
Some DVD-Video discs containing scenes of violence, for example,  
have Parental Lock levels (check the indications on the disc’s jacket  
or elsewhere). To restrict watching these discs, set the player’s level  
to the level lower than the discs.  
BD  
CLEAR  
ENTER  
DVD  
AVCHD  
CD  
Music files  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
1
Select and set Parental Lock.  
Use /to select, then press ENTER.  
DISPLAY POPUP MENU  
MENU  
TOOLS  
TOP MENU  
TOOLS  
TOP MENU  
ENTER  
ENTER  
HOME  
MENU  
RETURN  
HOME  
MENU  
RETURN  
Initial Setup  
BD PLAYER  
Initial Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
BDMV Parental Lock  
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
Set Password  
DVD-Video Parental Lock  
BDMV Parental Lock  
Country Code  
ꢀOff  
ꢀ255  
ꢀus  
Enter the password  
Setup Navigator  
Setup Navigator  
4
Change the age.  
2
Select and set DVD-Video Parental Lock Next Screen.  
Use the number buttons (0 to 9) or /to input the number, then  
press ENTER to set.  
Use /to select, then press ENTER.  
Use /to move the cursor.  
Initial Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
BDMV Parental Lock  
Age Restriction  
Language  
Parental Lock  
Options  
Setup Navigator  
Note  
• When Age Restriction is set to 255, watching is not restricted.  
46  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Input the password.  
Changing the Country/Area code  
06  
Use the number buttons (0 to 9) or /to input the number, then  
press ENTER to set.  
BD  
Use /to move the cursor.  
DVD  
AVCHD  
CD  
Music files  
Note  
CLEAR  
ENTER  
• Refer to Country/Area Code Table on page 56.  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
1
Select and set Parental Lock.  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
Use /to select, then press ENTER.  
DISPLAY POPUP MENU  
MENU  
TOOLS  
TOP MENU  
TOOLS  
TOP MENU  
ENTER  
HOME  
MENU  
RETURN  
ENTER  
HOME  
MENU  
RETURN  
Initial Setup  
BD PLAYER  
Initial Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
Set Password  
DVD-Video Parental Lock  
BDMV Parental Lock  
Country Code  
ꢀOff  
ꢀ255  
ꢀus  
Video Out  
Audio Out  
Speakers  
HDMI  
DVD-Video Parental Lock  
Enter the password  
Language  
Parental Lock  
Options  
Setup Navigator  
Setup Navigator  
2
Select and set Country/Area Code.  
Use /to select, then press ENTER.  
4
Change the level.  
Use /to change, then press ENTER to set.  
Initial Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
DVD-Video Parental Lock  
Level  
Off  
Language  
Parental Lock  
Options  
Setup Navigator  
Note  
• The level can be set to Off or between Level1 and Level8. When  
set to Off, watching is not restricted.  
47  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Input the password.  
Changing the terminals for  
outputting video and audio  
signals (Output Terminal Priority)  
06  
Use the number buttons (0 to 9) or /to input the number, then  
press ENTER to set.  
Use /to move the cursor.  
Set the video and audio terminals to be used.  
1
Select and set Options.  
Use /to select, then press ENTER.  
CLEAR  
ENTER  
TOOLS  
TOP MENU  
OUTPUT  
RESOLUTION  
SECONDARY  
AUDIO  
VIDEO  
VIDEO SELECT PLAY MODE  
HOME MEDIA  
GALLERY  
ENTER  
DISPLAY POPUP MENU  
MENU  
HOME  
MENU  
RETURN  
TOOLS  
TOP MENU  
Initial Setup  
BD PLAYER  
ENTER  
HOME  
MENU  
RETURN  
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
Output Terminal Priority  
On Screen Display  
Angle/Secondary Indicator ꢀOn  
Hybrid Disc Playback ꢀBD  
BDMV/BDAV Playback Priority ꢀBDAV  
Auto Power Off  
ꢀOn  
Initial Setup  
BD PLAYER  
ꢀOn  
Video Out  
Audio Out  
Speakers  
HDMI  
Country Code  
Enter the password  
Setup Navigator  
Language  
Parental Lock  
Options  
2
Select and set Output Terminal Priority Next Screen.  
Use /to select, then press ENTER.  
Setup Navigator  
4
Change the country/area code.  
Use /to change, then press ENTER to set.  
Initial Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
Country Code  
Code  
Number  
Setup Navigator  
To change the country/area code using  
numbers  
1
Use /to select Number.  
2
Use the number buttons (0 to 9) to input the number, then  
press ENTER.  
48  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Select the terminal for outputting video signals.  
Restoring all the settings to the  
factory default settings  
06  
Use /to select, then press .  
When a digital output is selected for the video output terminal,  
Video is fixed at HDMI and cannot be changed.  
When an analog output is selected for the video output terminal,  
Component Video or S-Video/Video can be selected for Video.  
1
2
Check that the player’s power is turned on.  
When a disc is playing, press to stop playback.  
TOOLS  
TOP MENU  
Eject the disc from the player.  
3
While pressing , press STANDBY/ON.  
Operate using the buttons on the player’s front panel.  
ENTER  
HOME  
MENU  
RETURN  
Note  
• After restoring all the settings to the factory default settings, use  
Setup Navigator to reset the player (page 20).  
Initial Setup  
BD PLAYER  
Video Out  
Audio Out  
Speakers  
HDMI  
Language  
Parental Lock  
Options  
Output Terminal Priority  
Video  
Audio  
S-Video/Video  
Analog Audio  
Setup Navigator  
• HDMI – HDMI OUT terminal  
• Component Video – COMPONENT VIDEO output terminals  
• S-Video/Video – S-VIDEO output terminal or VIDEO output  
terminal  
The video and audio signals output from the set output terminals are  
output synchronously (lip synchronization).  
Caution  
• If the output terminal you want to select at Video is not  
displayed, use the VIDEO SELECT button to switch between  
digital and analog output (page 24).  
4
Select the terminal for outputting audio signals.  
Use /to select, then press ENTER.  
• HDMI – HDMI OUT terminal  
• Digital Audio – DIGITAL OUT terminal (COAXIAL/OPTICAL)  
• Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT  
(7.1 ch) terminals  
The optimum audio signals for the audio format and the player’s  
settings are output from the output terminal(s) set here.  
Caution  
• Linear PCM (2-channel) audio signals are output from the audio  
terminals other than the one set at Audio, regardless of the  
audio format and the player’s settings.  
49  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the audio output settings  
06  
The audio signals that are output differ according to the audio format recorded on the disc and the player’s settings. Check on the table  
below.  
1
AUDIO OUT terminal  
DIGITAL OUT terminal  
HDMI OUT terminal  
Not converted to  
Audio format  
Converted to  
2
2
6
6,7,8  
linear PCM  
2ch  
Multi-channel  
PCM  
Auto  
3
linear PCM audio  
4,5  
audio  
BD-ROM Dolby Digital  
5.1-channel audio  
5.1-channel audio  
7.1-channel  
Dolby Digital  
Dolby Digital Plus  
Dolby Digital Plus  
Dolby Digital  
9
7.1-channel audio  
9,10  
11  
Dolby TrueHD  
audio  
Dolby TrueHD  
DTS Digital  
Surround  
DTS Digital  
Surround  
5.1-channel audio  
5.1-channel audio  
Converted to 2-  
channel audio  
Converted to 2-  
channel audio  
DTS-HD High  
Resolution Audio  
DTS-HD High  
Resolution Audio  
DTS Digital  
Surround  
12  
12  
5.1-channel audio  
5.1-channel audio  
DTS-HD Master  
Audio  
DTS-HD Master  
13  
Audio  
Linear PCM  
7.1-channel  
Converted to 2-  
channel audio  
9
7.1-channel audio  
7.1-channel audio  
9,10  
audio  
BD-R/RE Dolby Digital  
Dolby Digital  
MPEG-2 AAC  
Dolby Digital  
MPEG-2 AAC  
Converted to 2-  
channel audio  
Converted to 2-  
channel audio  
5.1-channel audio  
5.1-channel audio  
MPEG-2 AAC  
MPEG  
2-channel audio  
Linear PCM  
Dolby Digital  
DVD-  
Video  
Dolby Digital  
Dolby Digital  
Converted to 2-  
channel audio  
Converted to 2-  
channel audio  
5.1-channel audio  
5.1channel audio  
5.1-channel audio  
5.1-channel audio  
DTS Digital  
Surround  
DTS Digital  
Surround  
DTS Digital  
Surround  
MPEG  
2-channel audio  
Linear PCM  
DVD (VR Dolby Digital  
format)  
Converted to 2-  
channel audio  
Converted to 2-  
channel audio  
Dolby Digital  
Dolby Digital  
MPEG  
2-channel audio  
Linear PCM  
1. When outputting linear PCM audio signals, if the number of compatible channels of the connected HDMI device is lower, the signals are output with the number of  
channels for which the device is compatible.  
2. When Audio Output Mode is set to 2 Channel or Multi-channel (page 40).  
3. When Dolby Digital Out is set to Dolby Digital PCM, DTS Out is set to DTS PCM, or AAC Out is set to AAC PCM (page 40).  
4. When Dolby Digital Out is set to Dolby Digital 1/Dolby Digital 2, DTS Out is set to DTS 1/DTS 2 or AAC Out is set to AAC (page 40).  
5. When outputting Dolby Digital or DTS Digital Surround bitstream with settings of Dolby Digital 2 at Dolby Digital Out, DTS 2 at DTS Out, the secondary audio and  
interactive audio signals are not mixed for output.  
6. When HDMI Audio Out is set to PCM or Auto (page 41).  
7. When outputting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround, the  
secondary audio and interactive audio signals are not mixed.  
8. If the connected HDMI device is not compatible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are output in Dolby Digital bitstream.  
If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in DTS Digital Surround  
bitstream.  
If the connected HDMI device is not compatible with Dolby Digital or DTS Digital Surround bitstream, the signals are output in linear PCM.  
9. Only compatible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other cases, output as audio signals of 5.1-channels or less.  
10. When the output video resolution is set to 480i or 480p, the signals may be output in 2 channel, depending on HDMI High-Speed Transmission setting and/or the  
connected HDMI device (page 15).  
11. When the output video resolution is set to 480i or 480p, the signals may be output in Dolby Digital bitstream, depending on HDMI High-Speed Transmission setting  
and/or the connected HDMI device (page 15).  
12. DTS Digital Surround signals converted to linear PCM audio signals are output.  
13. When the output video resolution is set to 480i or 480p, the signals may be output in DTS Digital Surround bitstream, depending on HDMI High-Speed Transmission  
setting and/or the connected HDMI device (page 15).  
Caution  
• Linear PCM audio signals (2 channels) are output from all terminals other than the ones selected at Audio under Output Terminal  
Priority, regardless of the audio format or the player’s settings (pages 20 and 48).  
• The audio signals output from the DIGITAL OUT terminals have a sampling frequency of 48 kHz (44.1 kHz for CDs).  
• MPEG audio is output in linear PCM.  
50  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7  
07  
Additional information  
Troubleshooting  
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the  
points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If  
the trouble cannot be rectified after checking the items below, please contact customer services. In the US, call Toll Free (800) 421-1404.  
(Telephone lines are open Monday through Friday 6:00 AM to 4:30 PM (Pacific Time).) In Canada, call Local (905) 479-4411, or Long distance  
+1(877) 283-5901. (Telephone lines are open Monday through Friday 9:00 AM to 5:30 PM (EST).)  
Playback  
Problem  
Check  
Remedy  
Disc does not play.  
Is the disc scratched?  
Is the disc dirty?  
It may not be possible to play scratched discs.  
Clean the disc (page 59).  
Disc tray opens  
automatically.  
Is the disc properly set in the disc tray?  
• Set the disc with the printed side facing up.  
• Set the disc properly in the depression in the disc tray.  
Is the region number correct?  
The region numbers of discs that can be played on this set are  
as shown below (page 10).  
• BDs: “A” (or including “A”) and “ALL”  
• DVDs: “1” (or including “1”) and “ALL”  
Is the player set in a humid place?  
There could be condensation inside. Wait for the condensation  
to dissipate. Do not set the player near an air-conditioner, etc.  
(page 58).  
Picture freezes and the front  
panel and remote control  
buttons stop working.  
• Press STOP to stop playback, then restart playback.  
• If the playback cannot be stopped, press STANDBY/ON  
on the player’s front panel to turn off the power, then turn the  
power back on.  
• If the power cannot be turned off, press and hold  
STANDBY/ON on the player’s front panel for over 5  
seconds. The power will turn off.  
No picture is displayed or the Is the video cable properly connected?  
Insert the cable firmly and all the way in.  
picture is not displayed  
Is the video cable damaged?  
properly.  
If the cable is damaged, replace it with a new one.  
Is the input setting on the connected TV or AV receiver or  
Read the operating instructions of the connected components  
and switch to the proper input.  
amplifier right?  
Are the terminals for outputting video signals properly set?  
Press VIDEO SELECT to switch the terminal from which the  
video signals are output.  
Is the output video resolution properly set?  
Depending on the player’s output video resolution, the picture  
may not be displayed at all or displayed properly. Use OUTPUT  
RESOLUTION to switch to a resolution at which the picture is  
displayed properly (page 25).  
Is the player connected with an HDMI cable other than a High Press while pressing on the player’s front panel to restore  
Speed HDMI™ cable (with a Standard HDMI™ cable)?  
the video outputs to the factory default settings. After use  
Setup Navigator to reset the player.  
There are some BDs for which the picture will only be output  
when connected by HDMI cable.  
Picture is stretched.  
Is the TV’s aspect ratio properly set?  
Read the TV’s operating instructions and set the TV’s aspect  
ratio properly.  
Aspect ratio cannot be  
switched.  
Is 4:3 Video Out properly set?  
• Set 4:3 Video Out properly (page 40).  
• When video signals with a resolution of 1080/60i, 1080/60p,  
1080/24p or 720/60p are being output from the HDMI OUT  
terminal or the COMPONENT VIDEO output terminals, they  
may be output in the 16:9 (Widescreen) mode even if TV  
Aspect Ratio is set to 4:3 (Standard) (page 25).  
Sound and picture are not  
synchronized.  
Is Output Terminal Priority properly set?  
Set Output Terminal Priority properly (pages 20 and 48).  
51  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Check  
Remedy  
07  
Picture is disturbed during  
playback.  
• This player supports Macrovision analog copy protection  
technology. With some TVs (such as with built-in video deck),  
the picture will not be displayed properly when the copy  
protected DVD title is played. This is not a malfunction.  
Picture is dark.  
• If the player and TV are connected via a DVD recorder/video  
deck, etc., the picture will not be displayed properly due to  
analog copy protection. Connect the player and TV directly.  
No picture is displayed or  
picture is not output in high  
definition when playing BDs.  
With some content protected discs, it may not be possible to  
output the video signals from the VIDEO output terminals, the  
S-VIDEO output terminal or the COMPONENT VIDEO output  
terminals. In this case, connect using an HDMI cable  
(page 14).  
No sound is output.  
Sound is disturbed.  
Is the disc played back in slow motion?  
No sound is output during slow motion play and forward and  
reverse scanning.  
Is the disc played back in fast forward or fast reverse?  
Is the disc scratched?  
Is the disc dirty?  
The sound may not be output if the disc is scratched.  
Clean the disc (page 59).  
Is the player properly connected to the other components (AV • Check that you connect the player to the audio output  
receiver or amplifier, etc.)?  
terminals of a different component, etc.  
• Check that you connect the player to the PHONO input  
terminals of the AV receiver or amplifier, etc.  
Are the connected components (AV receiver or amplifier, etc.) Read the operating instructions of the connected components  
properly set?  
and check the volume, input, speaker settings, etc.  
Are the audio cables properly connected?  
Is the audio cable damaged?  
Is Audio Output Mode properly set?  
Insert the cables firmly and all the way in.  
If the cable is damaged, replace it with a new one.  
If Audio Output Mode is set to Multi-channel, the audio  
signals may not be output properly from the AUDIO OUT (2  
ch) terminals (page 40). Set Audio Output Mode to 2  
Channel.  
Are the speakers properly set?  
Set Speaker Setup properly (page 40).  
For some BDs, audio signals are only output from the optical  
digital audio output terminal, the coaxial digital audio output  
terminal or the HDMI output terminal.  
Multi-channel sound is not  
output.  
Is the AV receiver or amplifier, etc. connected to the HDMI  
OUT terminal, the AUDIO OUT (7.1 ch) terminals or DIGITAL or amplifier and check the audio output settings of AV receiver  
OUT (COAXIAL/OPTICAL) terminal?  
Read the operating instructions of the connected AV receiver  
or amplifier.  
Is Output Terminal Priority properly set?  
Linear PCM (2-channel) audio signals are output from output  
terminals other than the one set at Audio under Output  
Terminal Priority. Set Output Terminal Priority properly  
(page 48).  
Is the audio output of the connected AV receiver or amplifier, Read the operating instructions of the connected AV receiver  
etc., properly set?  
or amplifier and check the audio output settings of AV receiver  
or amplifier.  
Is multi-channel sound selected?  
Use the menu screen or AUDIO to switch the disc’s sound to  
multi-channel.  
Is Audio Out set to audio formats supported by the connected • Read the operating instructions of the connected AV receiver  
AV receiver or amplifier?  
or amplifier and check the supported audio formats.  
• Set Audio Out properly (page 40).  
Are Audio Output Mode and Speaker Setup properly set? • When the AV receiver or amplifier, etc., is connected to the  
AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to  
Multi-channel (page 40).  
• Set Speaker Setup properly (page 40).  
Digital audio signals are not Is Audio Out set to audio formats supported by the connected • Read the operating instructions of the connected AV receiver  
output from the DIGITAL  
OUT output (COAXIAL/  
DIGITAL) terminals (analog  
audio signals are output).  
AV receiver or amplifier?  
or amplifier and check the supported audio formats.  
• Set Audio Out properly (page 40).  
Noise can be heard when  
outputting DTS Digital  
Surround signals.  
Is the connected AV receiver or amplifier compatible with DTS If an AV receiver or amplifier that is not compatible with DTS  
Digital Surround?  
Digital Surround is connected to the DIGITAL OUT terminal,  
set DTS Out to DTS PCM. Noise will be heard if DTS Out is  
set to DTS (page 40).  
52  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Check  
Remedy  
07  
192 kHz or 96 kHz digital  
audio signals cannot be  
output from the DIGITAL  
OUT (COAXIAL/OPTICAL)  
terminals.  
It is not possible to output 192 kHz or 96 kHz digital audio  
signals from this player’s DIGITAL OUT (COAXIAL/OPTICAL)  
terminals. The signals are automatically converted to under 96  
kHz for output.  
Secondary audio or  
interactive audio is not  
output.  
Is HDMI Audio Out properly set?  
Set HDMI Audio Out to PCM (page 41).  
Are Dolby Digital Out and DTS Out properly set?  
Set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1  
(page 40).  
Sound is fast or slow.  
When an HDMI cable is connected, are audio signals being  
output from devices connected with cables other than HDMI receiver or amplifier compatible with the PQLS function via  
When this player is connected by HDMI cable to a Pioneer AV  
cables?  
HDMI connection, the PQLS function is activated when playing  
a music CD (CD-DA). Because of this, the sound output from  
components other than the ones connected by HDMI cable  
may be fast or slow. If this happens, set PQLS to Off (page 41).  
Files recorded on discs  
cannot be played.  
Is the disc one that is playable on this player?  
Is the file one that is playable on this player?  
Check whether the disc is one that can be played on this player  
(page 8).  
• Check whether the file is one that can be played on this  
player (page 10).  
• Check whether or not the file is damaged  
Files protected by DRM cannot be played.  
Erase the BDMV data (page 24).  
Is the file protected by DRM?  
A message indicating low  
memory (local storage)  
appears while playing a BD-  
ROM disc.  
When connected using an HDMI cable  
Problem  
Check  
Remedy  
HDMI indicator does not  
light.  
Is the input of the connected HDMI device properly set?  
Read the HDMI device’s operating instructions and set the  
input properly.  
Is a DVI device connected?  
Is the HDMI indicator lit?  
Read the DVI device’s operating instructions and check  
whether it is compatible with HDCP.  
No picture is displayed.  
• If the HDMI indicator is not lit, read the HDMI device’s  
operating instructions and switch to the proper input.  
• If the HDMI indicator is lit, use OUTPUT RESOLUTION to  
switch the output video resolution (page 25).  
Are the terminals for outputting video signals properly set?  
Is the resolution properly set?  
Press VIDEO SELECT to switch the HDMI OUT terminal.  
Depending on the output video resolution setting, the picture  
may not be output. Use OUTPUT RESOLUTION to switch the  
output video resolution (page 25).  
Is the HDMI cable properly connected?  
• Insert the cable firmly and all the way in.  
• With some cables, 1080p video signals cannot be properly  
output.  
Is a DVI device connected?  
Is the HDMI cable damaged?  
The picture may not be displayed properly if a DVI device is  
connected.  
If the cable is damaged, replace it with a new one.  
Pictures do not display  
properly on the TV.  
Change the HDMI Color Space setting (page 41).  
No sound is produced.  
Is a DVI device connected?  
The sound will not be output from the HDMI OUT terminal if a  
DVI device is connected. Connect the device to a DIGITAL OUT  
(OPTICAL/COAXIAL) terminal or the AUDIO OUT (2 ch)  
terminals.  
53  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Check  
Remedy  
07  
HDMI Control function does Is the HDMI cable properly connected?  
not work.  
Connect the HDMI cable properly.  
Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The HDMI Control function  
may not work properly if HDMI cable other than a High Speed  
HDMI™ cable is used.  
Is HDMI Control set to On on the player?  
Set HDMI Control to On on the player (page 41).  
Does the connected device support the HDMI Control  
function?  
• The HDMI Control function will not work with devices  
manufactured by companies other than Pioneer, even when  
connected using an HDMI cable.  
• The HDMI Control function will not work if devices that do not  
support the HDMI Control function or devices manufactured  
by companies other than Pioneer are connected between the  
HDMI Control-compatible device and the player.  
• The HDMI Control function may not work with certain Flat  
Panel TVs.  
Also refer to the operating instructions of the connected  
device.  
Is HDMI Control set to On on the connected device?  
Set HDMI Control to On on the connected device. The HDMI  
Control function works when HDMI Control is set to On for all  
the devices connected by HDMI cable.  
Once connections and settings of all the devices are finished,  
be sure to check that the player’s picture is output to the Flat  
Panel TV. (Also check after changing the connected devices  
and connecting and/or disconnecting HDMI cables.) If the  
player’s picture is not being output to the Flat Panel TV, the  
HDMI Control function may not work properly.  
For details, refer to the operating instructions of the connected  
device.  
Are multiple players connected?  
The HDMI Control function may not work if three or more  
players, including this player, are connected by HDMI cable.  
54  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
07  
Problem  
Check  
Remedy  
The power turns off  
automatically.  
Is Auto Power Off set to On?  
If Auto Power Off is set to On, the power turns off  
automatically if no operation is performed for over 30 minutes  
(page 42).  
Is HDMI Control set to On?  
The player’s power may turn off together with the power of the  
connected TV. If you do not want the player’s power to turn off  
when the TV’s power is turned off, set HDMI Control to Off  
(page 41).  
The power turns on  
automatically.  
Is HDMI Control set to On?  
The player’s power may turn on together with the power of the  
connected TV. If you do not want the player’s power to turn on  
when the TV’s power is turned on, set HDMI Control to Off  
(page 41).  
Inputs of connected TV and Is HDMI Control set to On?  
AV system, switches  
automatically.  
The inputs of the connected TV or AV system (AV receiver or  
amplifier, etc.) may automatically switch to the player when  
playback starts on the player or the menu screen (Home Media  
Gallery, etc.) is displayed. If you do not want the inputs of the  
connected TV and/or AV system (AV receiver or amplifier, etc.)  
to switch automatically, set HDMI Control to Off (page 41).  
Player cannot be operated  
with remote control.  
Is an AV receiver or amplifier connected to the CONTROL IN Operate with the remote control of the device connected to the  
terminal on the player’s rear panel? CONTROL IN terminal.  
Are you operating the remote control from a point too far away Operate from within 23 feet of the remote control sensor.  
from the player?  
Are the batteries dead?  
Settings you have made have • Have you disconnected the power cord while the player’s  
Replace the batteries (page 7).  
If the power cord is disconnected or there is a power failure  
while the player’s power is on, the settings you have made may  
be cleared. Always press STANDBY/ON on the player’s  
front panel or STANDBY/ON on the remote control and  
check that POWER OFF has turned off from the player’s front  
panel display before disconnecting the power cord. Be  
particularly careful when the power cord is connected to the  
AC outlet on another device because the player turns off in  
conjunction with the device. We recommend plugging the  
power cord into a wall outlet whenever possible.  
been cleared.  
power was on?  
• Has there been a power failure?  
After a disc is inserted,  
Loading stays displayed and  
playback does not start.  
Are there too many files recorded on the disc?  
When a disc on which files are recorded is inserted, depending  
on the number of files recorded on the disc, loading may take  
several dozen minutes.  
is displayed in file names,  
etc.  
The characters that cannot be displayed on this player are  
displayed in .  
The DVD layer of BD and DVD Is Hybrid Disc Playback properly set?  
Set Hybrid Disc Playback to DVD (page 42).  
hybrid discs cannot be  
played.  
The CD layer of BD and CD Is Hybrid Disc Playback properly set?  
Set Hybrid Disc Playback to CD (page 42).  
hybrid discs cannot be  
played.  
The Hybrid Disc Playback  
setting cannot be changed  
(displayed in gray).  
Is a disc set in the disc tray?  
Is a disc set in the disc tray?  
The Hybrid Disc Playback setting cannot be changed when a  
disc is set. Remove the disc, then change the setting.  
BDMV/BDAV Playback  
Priority setting cannot be  
changed (displayed in gray).  
The BDMV/BDAV Playback Priority setting cannot be  
changed when a disc is set. Remove the disc, then change the  
setting.  
55  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code Table and Country/Area Code Table  
07  
Language Code Table  
Language name (language code), input code  
Japanese (ja/jpn), 1001  
English (en/eng), 0514  
French (fr/fra), 0618  
German (de/deu), 0405  
Italian (it/ita), 0920  
Spanish (es/spa), 0519  
Chinese (zh/zho), 2608  
Dutch (nl/nld), 1412  
Portuguese (pt/por), 1620  
Swedish (sv/swe), 1922  
Russian (ru/rus), 1821  
Korean (ko/kor), 1115  
Greek (el/ell), 0512  
Dzongkha (dz/dzo), 0426  
Esperanto (eo/epo), 0515  
Estonian (et/est), 0520  
Basque (eu/eus), 0521  
Persian (fa/fas), 0601  
Finnish (fi/fin), 0609  
Fijian (fj/fij), 0610  
Faroese (fo/fao), 0615  
Frisian (fy/fry), 0625  
Kirghiz (ky/kir), 1125  
Latin (la/lat), 1201  
Lingala (ln/lin), 1214  
Lao (lo/lao), 1215  
Lithuanian (lt/lit), 1220  
Latvian (lv/lav), 1222  
Malagasy (mg/mlg), 1307  
Maori (mi/mri), 1309  
Macedonian (mk/mkd), 1311  
Malayalam (ml/mal), 1312  
Mongolian (mn/mon), 1314  
Moldavian (mo/mol), 1315  
Marathi (mr/mar), 1318  
Malay (ms/msa), 1319  
Maltese (mt/mlt), 1320  
Burmese (my/mya), 1325  
Nauru (na/nau), 1401  
Nepali (ne/nep), 1405  
Norwegian (no/nor), 1415  
Occitan (oc/oci), 1503  
Oromo (om/orm), 1513  
Oriya (or/ori), 1518  
Panjabi (pa/pan), 1601  
Polish (pl/pol), 1612  
Pushto (ps/pus), 1619  
Quechua (qu/que), 1721  
Rhaeto-Romance (rm/roh), 1813  
Rundi (rn/run), 1814  
Sinhalese (si/sin), 1909  
Slovak (sk/slk), 1911  
Slovenian (sl/slv), 1912  
Samoan (sm/smo), 1913  
Shona (sn/sna), 1914  
Somali (so/som), 1915  
Albanian (sq/sqi), 1917  
Serbian (sr/srp), 1918  
Swati (ss/ssw), 1919  
Sotho, Southern (st/sot), 1920  
Sundanese (su/sun), 1921  
Swahili (sw/swa), 1923  
Tamil (ta/tam), 2001  
Telugu (te/tel), 2005  
Tajik (tg/tgk), 2007  
Irish (ga/gle), 0701  
Scots-Gaelic (gd/gla), 0704  
Galician (gl/glg), 0712  
Guarani (gn/grn), 0714  
Gujarati (gu/guj), 0721  
Hausa (ha/hau), 0801  
Hindi (hi/hin), 0809  
Croatian (hr/hrv), 0818  
Hungarian (hu/hun), 0821  
Armenian (hy/hye), 0825  
Interlingua (ia/ina), 0901  
Interlingue (ie/ile), 0905  
Inupiaq (ik/ipk), 0911  
Indonesian (in/ind), 0914  
Icelandic (is/isl), 0919  
Hebrew (iw/heb), 0923  
Yiddish (ji/yid), 1009  
Javanese (jw/jav), 1023  
Georgian (ka/kat), 1101  
Kazakh (kk/kaz), 1111  
Kalaallisut (kl/kal), 1112  
Khmer (km/khm), 1113  
Kannada (kn/kan), 1114  
Kashmiri (ks/kas), 1119  
Kurdish (ku/kur), 1121  
Afar (aa/aar), 0101  
Abkhazian (ab/abk), 0102  
Afrikaans (af/afr), 0106  
Amharic (am/amh), 0113  
Arabic (ar/ara), 0118  
Assamese (as/asm), 0119  
Aymara (ay/aym), 0125  
Azerbaijani (az/aze), 0126  
Bashkir (ba/bak), 0201  
Belarusian (be/bel), 0205  
Bulgarian (bg/bul), 0207  
Bihari (bh/bih), 0208  
Bislama (bi/bis), 0209  
Bengali (bn/ben), 0214  
Tibetan (bo/bod), 0215  
Breton (br/bre), 0218  
Catalan (ca/cat), 0301  
Corsican (co/cos), 0315  
Czech (cs/ces), 0319  
Welsh (cy/cym), 0325  
Danish (da/dan), 0401  
Thai (th/tha), 2008  
Tigrinya (ti/tir), 2009  
Turkmen (tk/tuk), 2011  
Tagalog (tl/tgl), 2012  
Tswana (tn/tsn), 2014  
Tonga (Tonga Islands) (to/ton), 2015  
Turkish (tr/tur), 2018  
Tsonga (ts/tso), 2019  
Tatar (tt/tat), 2020  
Twi (tw/twi), 2023  
Ukrainian (uk/ukr), 2111  
Urdu (ur/urd), 2118  
Uzbek (uz/uzb), 2126  
Vietnamese (vi/vie), 2209  
Volapük (vo/vol), 2215  
Wolof (wo/wol), 2315  
Xhosa (xh/xho), 2408  
Yoruba (yo/yor), 2515  
Zulu (zu/zul), 2621  
Romanian (ro/ron), 1815  
Kinyarwanda (rw/kin), 1823  
Sanskrit (sa/san), 1901  
Sindhi (sd/snd), 1904  
Sango (sg/sag), 1907  
Serbo-Croatian (sh/scr), 1908  
Country/Area Code Table  
Country/Area name, input code, Country/Area code  
Anguilla, 0109, ai  
Antigua and Barbuda, 0107, ag  
Argentina, 0118, ar  
Armenia, 0113, am  
Australia, 0121, au  
Austria, 0120, at  
Azerbaijan, 0126, az  
Bahamas, 0219, bs  
Barbados, 0202, bb  
Belarus, 0225, by  
Belgium, 0205, be  
Belize, 0226, bz  
Bermuda, 0213, bm  
Brazil, 0218, br  
Bulgaria, 0207, bg  
Canada, 0301, ca  
Cayman Islands, 1125, ky  
Chile, 0312, cl  
China, 0314, cn  
Dominican Republic, 0415, do  
Liechtenstein, 1209, li  
Lithuania, 1220, lt  
Luxembourg, 1221, lu  
Macedonia, the Former Yugoslav  
Republic of, 1311, mk  
Malaysia, 1325, my  
San Marino, 1913, sm  
Singapore, 1907, sg  
Slovakia, 1911, sk  
Slovenia, 1909, si  
Spain, 0519, es  
Suriname, 1918, sr  
Sweden, 1905, se  
Switzerland, 0308, ch  
Taiwan, Province of China, 2023, tw  
Tajikistan, 2010, tj  
Estonia, 0505, ee  
Finland, 0609, fi  
France, 0618, fr  
Georgia, 0705, ge  
Germany, 0405, de  
Greece, 0718, gr  
Greenland, 0712, gl  
Grenada, 0704, gd  
Guyana, 0725, gy  
Haiti, 0820, ht  
Hong Kong, 0811, hk  
Hungary, 0821, hu  
Iceland, 0919, is  
India, 0914, in  
Indonesia, 0904, id  
Ireland, 0905, ie  
Israel, 0912, il  
Italy, 0920, it  
Jamaica, 1013, jm  
Japan, 1016, jp  
Kazakhstan, 1126, kz  
Korea, Republic of, 1118, kr  
Kyrgyzstan, 1107, kg  
Latvia, 1222, lv  
Malta, 1320, mt  
Mexico, 1324, mx  
Moldova, Republic of, 1304, md  
Monaco, 1303, mc  
Montserrat, 1319, ms  
Netherlands, 1412, nl  
New Zealand, 1426, nz  
Norway, 1415, no  
Pakistan, 1611, pk  
Peru, 1605, pe  
Philippines, 1608, ph  
Poland, 1612, pl  
Portugal, 1620, pt  
Puerto Rico, 1618, pr  
Romania, 1815, ro  
Russian Federation, 1821, ru  
Saint Kitts and Nevis, 1114, kn  
Saint Lucia, 1203, lc  
Saint Vincent and the Grenadines, 2203, vc  
Thailand, 2008, th  
Trinidad and Tobago, 2020, tt  
Tunisia, 2014, tn  
Turkey, 2018, tr  
Turkmenistan, 2013, tm  
Turks and Caicos Islands, 2003, tc  
Ukraine, 2101, ua  
United Kingdom, 0702, gb  
United States, 2119, us  
Uruguay, 2125, uy  
Uzbekistan, 2126, uz  
Venezuela, 2205, ve  
Virgin Islands, British, 2207, vg  
Colombia, 0315, co  
Croatia, 0818, hr  
Cyprus, 0325, cy  
Czech Republic, 0326, cz  
Denmark, 0411, dk  
Dominica, 0413, dm  
56  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
07  
Model  
BDP-05FD  
Type  
Blu-ray Disc PLAYER  
Rated voltage  
Rated frequency  
Power consumption  
Power consumption (standby)  
Weight  
AC 120 V  
60 Hz  
37 W  
0.5 W  
5.7 kg (12 lb 10 oz)  
External dimensions (including projecting parts)  
420 mm (W) x 124 mm (H) x 360 mm (D)  
9
15  
3
(16 /16 in. (W) x 4 /16 in. (H) x 14 /16 in. (D))  
+5 °C to +35 °C (+41 °F to +95 °F)  
5 % to 85 % (no condensation)  
Tolerable operating temperature  
Tolerable operating humidity  
Video outputs  
Video  
1 set, RCA jack (1.0 Vp-p (75 Ω))  
S-Video  
1 set, S-Video jack:  
Y (luminance): 1.0 Vp-p (75 Ω)  
C (color): 0.286 Vp-p (75 Ω)  
Component video  
1 set, RCA jacks:  
Y: 1.0 Vp-p (75 Ω)  
PB, PR: 0.7 Vp-p (75 Ω)  
HDMI  
1 set, 19-pin (5V, 150 mA)  
Audio outputs  
2-channel (stereo)  
Number of channels: 2, RCA jacks  
7.1-channel (multi-channel: front left/ Number of channels: 8, RCA jacks  
right, surround left/right, center,  
surround back left/right, subwoofer)  
Audio output level  
Frequency response  
S/N ratio  
200 mVrms (1 kHz, –20 dB)  
4 Hz to 88 kHz (192 kHz sampling)  
115 dB  
Dynamic range  
103 dB  
Total harmonic distortion  
Wow & flutter  
0.0015 %  
Below measurable limits ( 0.001 % W. PEAK)  
1 set, Optical digital jack  
1 set, RCA jack  
Digital audio outputs Optical  
Coaxial  
Control  
Input  
1 set, Minijack (3.5 ø)  
Note  
• The specifications and design of this product are subject to change without notice.  
®
• This product includes FontAvenue fonts licensed by NEC Corporation. FontAvenue is a registered trademark of NEC Corporation.  
57  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condensation  
Cautions on use  
07  
If the player is moved suddenly from a cold place into a warm room  
(in winter, for example) or if the temperature in the room in which  
the player is installed rises suddenly due to a heater, etc., water  
droplets (condensation) may form inside (on operating parts and the  
lens). When condensation is present, the player will not operate  
properly and playback is not possible. Let the player stand at room  
temperature for 1 or 2 hours with the power turned on (the time  
depends on the extent of condensation). The water droplets will  
dissipate and playback will become possible.  
Moving the player  
If you need to move this unit, first remove the disc if there’s one  
loaded, and close the disc tray. Next, press STANDBY/ON to  
switch the power to standby, checking that the POWER OFF  
indication on the front panel display goes off. Wait at least 10  
seconds. Lastly, disconnect the power cord.  
Condensation can also occur in the summer if the player is exposed  
to the direct wind from an air-conditioner. If this happens, move the  
player to a different place.  
Never lift or move the unit during playback — discs rotate at a high  
speed and may be damaged.  
Place of installation  
Cleaning the player  
Select a stable place near the TV and AV system to which the unit is  
connected.  
Normally, wipe the player with a soft cloth. For tough dirt, apply  
some neutral detergent diluted in 5 to 6 parts water to a soft cloth,  
wring out thoroughly, wipe off the dirt, then wipe again with a dry  
cloth.  
Do not place the player on top of a TV or color monitor. Keep it away  
from cassette decks or other components easily affected by  
magnetism.  
Note that getting alcohol, thinner, benzene or insecticide on the  
player could cause the print and coating to peel off. Also, avoid  
leaving rubber or vinyl products in contact with the player for long  
periods of time, as this could damage the cabinet.  
Avoid the following types of places:  
• Places exposed to direct sunlight  
• Humid or poorly ventilated places  
• Extremely hot or cold places  
When using chemical-impregnated wipes, etc., read the wipe’s  
cautions carefully.  
• Places subject to vibration  
Unplug the power cord from the power outlet when cleaning the  
player.  
• Dusty places  
• Places exposed to soot, steam or heat (in kitchens, etc.)  
Caution for when the unit is  
installed in a rack with a glass  
door  
Do not place objects on top  
Do not place objects on top of the player.  
Do not obstruct the ventilation holes  
Do not use the player on a shaggy rug, bed, or sofa, and do not cover  
the player with a cloth, etc. Doing so will prevent heat dissipation  
and could lead to damage.  
Do not press the OPEN/CLOSE on the remote control to open the  
disc tray while the glass door is closed. The door will hamper the  
movement of the disc tray, and the unit could be damaged.  
Keep away from heat  
Do not place the player on top of an amplifier or other device  
generating heat. When installing in a rack, to avoid the heat  
generated by the amplifier and other devices, place it on a shelf  
below the amplifier whenever possible.  
Cleaning the pickup lens  
The player’s lens should not become dirty in normal use, but if for  
some reason it should malfunction due to dust or dirt, consult your  
nearest Pioneer-authorized service center. Although lens cleaners  
for players are commercially available, we advise against using  
them since some may damage the lens.  
Turn the power off when not  
using the player  
Depending on the conditions of the TV broadcast signals, striped  
patterns may appear on the screen when the TV is turned on while  
the player’s power is turned on. This is not a malfunction with the  
player or TV. If this happens, turn the player’s power off. In the same  
way, noise may be heard in the sound of a radio.  
58  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handling discs  
Glossary  
07  
Do not use damaged (cracked or warped) discs.  
Do not scratch the disc’s signal surface or let it get dirty.  
Do not load more than one disc into the player at a time.  
Aspect ratio  
The ratio of a TV screen’s width to its height. Conventional TVs have  
an aspect ratio of 4:3, while high definition (HD) and widescreen TVs  
have an aspect ratio of 16:9.  
Do not glue paper or put stickers onto the disc, or use a pencil, ball-  
point pen or other sharp-tipped writing instrument. These could all  
damage the disc.  
Audio language  
Multiple audio tracks, for example the original sound and the  
dubbed sound, can be recorded on BD-ROM or DVD-Video discs. Up  
to 32 languages (32 audio tracks) can be recorded on BD-ROM  
discs, up to 8 languages (8 audio tracks) on DVD-Video discs, so you  
can select the desired language when watching the disc.  
Storing discs  
Always store discs in their cases, and place the cases vertically,  
avoiding places exposed to high temperature or humidity, direct  
sunlight or extremely low temperatures.  
AVCHD (Advanced Video Codec High  
Definition)  
The AVCHD is a high definition (HD) digital video camera recorder  
format recording high-definition onto certain media by using highly  
efficient codec technologies.  
Be sure to read the cautions included with the disc.  
Cleaning discs  
It may not be possible to play the disc if there are fingerprints or dust  
on it. In this case, using a cleaning cloth, etc., to wipe the disc gently  
from the center toward the outer edge. Do not use a dirty cleaning  
cloth.  
BD-J  
With BD-ROMs, it is possible to use Java applications to create  
highly interactive titles, for example including games.  
Do not use benzene, thinner or other volatile chemicals. Also do not  
use record spray or antistatic agents.  
For tough dirt, apply some water to a soft cloth, wring out  
thoroughly, wipe off the dirt, then wipe off the moisture with a dry  
cloth.  
Java and all Java-related trademarks and logos are trademarks or  
registered trademarks of Sun Microsystems, Inc., in the United  
States and other countries.  
Specially shaped discs  
Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be  
used on this player. Never use such discs, as they will damage the  
player.  
BDAV  
Of the BD format, the Audio Visual Format Specifications for HD  
digital broadcast recording is referred to as BDAV on this player and  
in this operating instructions.  
BDMV  
Of the BD format, the Audio Visual Format Specifications designed  
for pre-packaged high definition (HD) movie contents is referred to  
as BDMV on this player and in this operating instructions.  
Condensation on discs  
If the disc is moved suddenly from a cold place into a warm room (in  
winter, for example), water droplets (condensation) may form on the  
disc surface. Discs will not play properly if there is condensation on  
them. Carefully wipe off the water droplets from the disc surface  
before using the disc.  
Component video output  
This video output terminal provides clearer pictures when  
connected to a TV equipped with component inputs. Component  
video signals consist of three signals, Y, PB and PR.  
Composite video output  
Signals mixing the luminance signal (Y) and the color signal (C) so  
they can be transferred on a single cord are output from this  
terminal.  
59  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deep Color  
HDMI (High-Definition Multimedia  
Interface)  
A digital interface standard for next-generation TVs expanding the  
DVI (Digital Video Interface) terminal used for example for computer  
displays. It allows transfer of non-compressed digital video and  
audio signals (Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-  
HD Master Audio, DTS-HD High Resolution Audio, DTS Digital  
Surround, MPEG-2 AAC, linear PCM, etc.) with a single connector.  
07  
This is one of the capabilities of HDMI™. The players supporting  
Deep Color can transmit a video signal with a color bit depth of  
greater than 8 bits per color component. Subtle color gradations  
can be reproduced when connected to a TV that supports Deep  
Color.  
Dolby Digital  
Dolby Digital is an audio format to record the sound in up to 5.1  
channels with a fraction of the amount of data as compared to linear  
PCM audio signals.  
Interactive audio  
The audio signals recorded in the titles of BD-ROMs. They include  
for example the clicking sound made when the menu screen is  
operated.  
Dolby Digital Plus  
Dolby Digital Plus is an audio format for high-definition media. Built  
on Dolby Digital, it combines the efficiency and flexibility to provide  
high quality multi-channel audio. With BD-ROMs, up to 7.1  
channels of digital sound can be recorded.  
Interlaced scan  
With this method, one picture is displayed by scanning it twice. The  
odd lines are displayed in the first pass, the even lines are displayed  
in the second, to form a single picture (frame). Interlaced scan is  
indicated in this player and operating instructions by an “i” after the  
resolution value (for example, 480i).  
Dolby TrueHD  
Dolby TrueHD is an audio format using lossless coding. With BD-  
ROMs, up to 8 channels can be recorded at 96 kHz/24 bits, or up to  
6 channels at 192 kHz/24 bits.  
Linear PCM  
This is referred as the audio signals that are not compressed,  
frequently used for DVD-Video discs containing musicals or music  
concerts. This can also be indicated “48 kHz/16 bit”, “96 kHz”, etc.  
DRM  
A technology for protecting copyrighted digital data. Digitized  
movies, images and music retain the same quality even when they  
are copied or transferred repeatedly. DRM is a technology for  
restricting the distribution or playback of such digital data without  
the authorization of the copyright holder.  
MPEG (Moving Picture Experts Group)  
The name of a family of standards used to encode video and audio  
signals in a digital compressed format. The video encoding  
standards include MPEG-1 Video, MPEG-2 Video, MPEG-4 Visual,  
MPEG-4 AVC etc. The audio encoding standards include MPEG-1  
Audio, MPEG-2 Audio, MPEG-2 AAC etc.  
DTS Digital Surround  
DTS Digital Surround is an audio format to record 48 kHz/24 bits  
audio signals in 5.1 channels.  
Multi angle  
Up to 9 camera angles can be recorded simultaneously on BD-ROM  
or DVD-Video discs, letting you watch the same scene from different  
angles.  
DTS-HD High Resolution Audio  
DTS-HD High Resolution Audio is an audio format using lossy  
coding. It can record 7.1 channels at 96 kHz/24 bits.  
DTS-HD Master Audio  
DTS-HD Master Audio is an audio format using lossless coding.  
With BD-ROMs, 7.1 channels can be recorded at 96 kHz/24 bits, or  
5.1 channels at 192 kHz/24 bits.  
Parental Lock  
Playback of the contents of some BD-ROM or DVD-Video discs can  
be restricted, for example for discs containing scenes of violence.  
With BD-ROM discs, an age restriction can be set to restrict  
playback. Playing DVD-Video title can be restricted by setting the  
parental lock level.  
Dynamic range  
This refers to the difference between the maximum and minimum  
level of the sound. The dynamic range is measured in units of  
decibels (dB).  
Picture-in-Picture (P-in-P)  
This is a function for superimposing a sub video on the main video.  
Some BD-ROMs include secondary video, which can be  
superimposed on the primary video.  
When the dynamic range is compressed (Audio DRC), the minimum  
signal level is increased and the maximum signal level decreased.  
This way, the volume of loud sounds such as explosions is reduced,  
while the sounds with a low level, such as human voices, are easier  
to listen to.  
Progressive scan  
With this method, one picture is consisted of a single picture,  
without dividing it in two pictures. Progressive scan provides clear  
pictures with no flicker, in particular for still pictures that contain  
much text, graphics, or horizontal lines. Progressive scan is  
indicated in this player and operating instructions by a “p” after the  
resolution value (for example, 480p).  
Frames and fields  
A frame is the unit for one of the still pictures which compose  
motion pictures. One frame consists of a picture of odd lines and a  
picture of even lines called fields in video signal with interlaced scan  
method (480i, 1080i, etc.).  
Region number  
HDCP (High-bandwidth Digital Content  
Protection)  
A technology for protecting copyrights that encrypts digital video  
signals.  
A number assigned to Blu-ray Disc Players, BD-ROM and DVD-  
Video discs according to the region in which they are sold. A disc  
can be played if the region numbers indicated on the disc include  
the number set for the player or if “ALL” is indicated.  
60  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S-Video output  
An output terminal for transmitting separate luminance (Y) and  
color (C) signals over a single cord. It offers clearer pictures than the  
composite video output.  
07  
Secondary audio  
Some BD-ROMs include sub audio streams mixed with the main  
audio. These sub audio streams are called “secondary audio”. On  
some discs this secondary audio is recorded as the audio for the  
secondary video.  
Secondary video  
Some BD-ROMs include sub videos superimposed on the main  
videos using the Picture-in-Picture function. These sub videos are  
called “secondary video”.  
Subtitle language  
This refers to the language of the subtitles often used on movies. Up  
to 255 languages (255 types of subtitles) can be recorded on BD-  
ROM discs, 32 languages (32 types of subtitles) on DVD-Video discs,  
so you can select the desired subtitle when watching the disc.  
VC-1  
A video codec developed by Microsoft and standardized by the  
Society of Motion Picture and Television Engineers (SMPTE). Some  
BDs include videos encoded in this codec.  
61  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Licenses  
07  
The licenses for the software used on this player are shown below.  
libxml2  
The MIT License  
Copyright © <year> <copyright holders>  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software  
without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit  
persons to whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.  
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE  
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH  
THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
OpenSSL  
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit.  
See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-  
[email protected].  
OpenSSL License  
Copyright © 1998-2007 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the  
OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"  
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission.  
For written permission, please contact [email protected].  
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the  
OpenSSL Toolkit (http://www.openssl.org/)"  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY  
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
This product includes cryptographic software written by Eric Young ([email protected]).This product includes software written by Tim Hudson ([email protected]).  
Original SSLeay License  
Copyright © 1995-1998 Eric Young ([email protected])  
All rights reserved.  
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this  
distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright  
terms except that the holder is Tim Hudson ([email protected]).  
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given  
attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided  
with the package.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software  
written by Eric Young ([email protected])"  
The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).  
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product  
includes software written by Tim Hudson ([email protected])"  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE  
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN  
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under  
another distribution licence [including the GNU Public Licence.]  
zlib  
This software is based in part on zlib see http://www.zlib.net for information.  
FreeType2  
The FreeType Project LICENSE  
2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg  
62  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
07  
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which  
rely on, or relate to, the FreeType Project.  
This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test  
programs, documentation and makefiles, at the very least.  
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and  
freeware products alike. As a consequence, its main points are that:  
•
•
•
We don't promise that this software works. However, we will be interested in any kind of bug reports.('as is' distribution)  
You can use this software for whatever you want, in parts or full form, without having to pay us.('royalty-free' usage)  
You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documentation that you  
have used the FreeType code.('credits')  
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties covering The  
FreeType Project and assume no liability related to The FreeType Project.  
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text:  
Portions of this software are copyright © <year> The FreeType Project (www.freetype.org). All rights reserved.  
Please replace <year> with the value from the FreeType version you actually use.  
Legal Terms  
0. Definitions  
Throughout this license, the terms 'package', 'FreeType Project', and 'FreeType archive' refer to the set of files originally distributed by the authors (David Turner, Robert  
Wilhelm, and Werner Lemberg) as the 'FreeType Project', be they named as alpha, beta or final release.  
'You' refers to the licensee, or person using the project, where 'using' is a generic term including compiling the project's source code as well as linking it to form a  
'program' or 'executable'. This program is referred to as 'a program using the FreeType engine'.  
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file  
in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us  
to verify this.  
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.  
1. No Warranty  
THE FREETYPE PROJECT IS PROVIDED 'AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE  
LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.  
2. Redistribution  
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of,  
distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise  
some or all of the rights granted herein, subject to the following conditions:  
•
Redistribution of source code must retain this license file ('FTL.TXT') unaltered; any additions, deletions or changes to the original files must be clearly indicated  
in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files.  
Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution  
documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isn't mandatory.  
•
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us.  
However, no fee need be paid to us.  
3. Advertising  
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior  
written permission.  
We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: 'FreeType  
Project', 'FreeType Engine', 'FreeType library', or 'FreeType Distribution'.  
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one  
contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate  
that you understand and accept all the terms of this license.  
4. Contacts  
There are two mailing lists related to FreeType:  
•
[email protected]  
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in  
this list if you haven't found anything to help you in the documentation.  
•
[email protected]  
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.  
Our home page can be found at  
http://www.freetype.org  
libpng  
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:  
If you modify libpng you may insert additional notices immediately following this sentence.  
libpng versions 1.2.6, August 15, 2004, through 1.2.26, April 2, 2008, are Copyright © 2004, 2006-2008 Glenn Randers-Pehrson, and are distributed according to the same  
disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors  
Cosmin Truta  
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright © 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer  
and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors  
Simon-Pierre Cadieux  
Eric S. Raymond  
Gilles Vollant  
and with the following additions to the disclaimer:  
There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any  
of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user.  
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright © 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same  
disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:  
Tom Lane  
Glenn Randers-Pehrson  
Willem van Schaik  
63  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-  
0.88, with the following individuals added to the list of Contributing Authors:  
07  
John Bowler  
Kevin Bracey  
Sam Bushell  
Magnus Holmgren  
Greg Roelofs  
Tom Tanner  
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.  
For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals:  
Andreas Dilger  
Dave Martindale  
Guy Eric Schalnat  
Paul Schmidt  
Tim Wegner  
The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation,  
the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special,  
exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage.  
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions:  
1. The origin of this source code must not be misrepresented.  
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.  
3. This Copyright notice may not be removed or altered from any source or altered source distribution.  
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format  
in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.  
A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL));Also, the PNG logo (in PNG format, of  
course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).  
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.  
Glenn Randers-Pehrson  
glennrp at users.sourceforge.net  
2-Apr-08  
libjpg  
The Independent JPEG Group's JPEG software  
README for release 6b of 27-Mar-1998  
This distribution contains the sixth public release of the Independent JPEG Group's free JPEG software. You are welcome to redistribute this software and to use it for any  
purpose, subject to the conditions under LEGAL ISSUES, below.  
Serious users of this software (particularly those incorporating it into larger programs) should contact IJG at [email protected] to be added to our electronic mailing  
list. Mailing list members are notified of updates and have a chance to participate in technical discussions, etc.  
This software is the work of Tom Lane, Philip Gladstone, Jim Boucher, Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Guido Vollbeding, Ge'  
Weijers, and other members of the Independent JPEG Group.  
IJG is not affiliated with the official ISO JPEG standards committee.  
DOCUMENTATION ROADMAP  
This file contains the following sections:  
OVERVIEW  
LEGAL ISSUES  
REFERENCES  
ARCHIVE LOCATIONS  
RELATED SOFTWARE  
FILE FORMAT WARS  
TO DO  
General description of JPEG and the IJG software.  
Copyright, lack of warranty, terms of distribution.  
Where to learn more about JPEG.  
Where to find newer versions of this software.  
Other stuff you should get.  
Software *not* to get.  
Plans for future IJG releases.  
Other documentation files in the distribution are:  
User documentation:  
install.doc  
usage.doc  
How to configure and install the IJG software.  
Usage instructions for cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom.  
*.1 Unix-style man pages for programs (same info as usage.doc).  
wizard.doc  
change.log  
Advanced usage instructions for JPEG wizards only.  
Version-to-version change highlights.  
Programmer and internal documentation:  
libjpeg.doc  
example.c  
structure.doc  
filelist.doc  
How to use the JPEG library in your own programs.  
Sample code for calling the JPEG library.  
Overview of the JPEG library's internal structure.  
Road map of IJG files.  
coderules.doc  
Coding style rules --- please read if you contribute code.  
Please read at least the files install.doc and usage.doc. Useful information can also be found in the JPEG FAQ (Frequently Asked Questions) article. See ARCHIVE  
LOCATIONS below to find out where to obtain the FAQ article.  
If you want to understand how the JPEG code works, we suggest reading one or more of the REFERENCES, then looking at the documentation files (in roughly the order  
listed) before diving into the code.  
OVERVIEW  
This package contains C software to implement JPEG image compression and decompression. JPEG (pronounced "jay-peg") is a standardized compression method for  
full-color and gray-scale images. JPEG is intended for compressing real-world scenes; line drawings, cartoons and other non-realistic images are not its strong suit. JPEG  
is lossy, meaning that the output image is not exactly identical to the input image. Hence you must not use JPEG if you have to have identical output bits. However, on  
typical photographic images, very good compression levels can be obtained with no visible change, and remarkably high compression levels are possible if you can tolerate  
a low-quality image. For more details, see the references, or just experiment with various compression settings.  
This software implements JPEG baseline, extended-sequential, and progressive compression processes. Provision is made for supporting all variants of these processes,  
although some uncommon parameter settings aren't implemented yet. For legal reasons, we are not distributing code for the arithmetic-coding variants of JPEG; see  
LEGAL ISSUES. We have made no provision for supporting the hierarchical or lossless processes defined in the standard.  
We provide a set of library routines for reading and writing JPEG image files, plus two sample applications "cjpeg" and "djpeg", which use the library to perform conversion  
between JPEG and some other popular image file formats. The library is intended to be reused in other applications.  
64  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In order to support file conversion and viewing software, we have included considerable functionality beyond the bare JPEG coding/decoding capability; for example, the  
color quantization modules are not strictly part of JPEG decoding, but they are essential for output to colormapped file formats or colormapped displays. These extra  
functions can be compiled out of the library if not required for a particular application. We have also included jpegtran, a utility for lossless transcoding between different  
JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple applications for inserting and extracting textual comments in JFIF files.  
The emphasis in designing this software has been on achieving portability and flexibility, while also making it fast enough to be useful. In particular, the software is not  
intended to be read as a tutorial on JPEG. (See the REFERENCES section for introductory material.) Rather, it is intended to be reliable, portable, industrial-strength code.  
We do not claim to have achieved that goal in every aspect of the software, but we strive for it.  
07  
We welcome the use of this software as a component of commercial products. No royalty is required, but we do ask for an acknowledgement in product documentation,  
as described under LEGAL ISSUES.  
LEGAL ISSUES  
In plain English:  
1. We don't promise that this software works. (But if you find any bugs, please let us know!)  
2. You can use this software for whatever you want. You don't have to pay us.  
3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in your documentation that you've used the IJG code.  
In legalese:  
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or fitness for a particular  
purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to its quality and accuracy.  
This software is copyright © 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below.  
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions:  
(1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any  
additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.  
(2) If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the Independent JPEG  
Group".  
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for  
damages of any kind.  
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us.  
Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This  
software may be referred to only as "the Independent JPEG Group's software".  
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product  
vendor.  
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is  
NOT covered by the above copyright and conditions, but instead by the usual distribution terms of the Free Software Foundation; principally, that you must include source  
code if you redistribute it. (See the file ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part of any program generated from the IJG code, this does  
not limit you more than the foregoing paragraphs do.  
The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely distributable. The same holds for  
its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freely distributable.  
It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be used  
without obtaining one or more licenses. For this reason, support for arithmetic coding has been removed from the free JPEG software. (Since arithmetic coding provides  
only a marginal gain over the unpatented Huffman mode, it is unlikely that very many implementations will support it.) So far as we are aware, there are no patent  
restrictions on the remaining code.  
The IJG distribution formerly included code to read and write GIF files. To avoid entanglement with the Unisys LZW patent, GIF reading support has been removed  
altogether, and the GIF writer has been simplified to produce uncompressed GIFs. This technique does not use the LZW algorithm; the resulting GIF files are larger than  
usual, but are readable by all standard GIF decoders.  
We are required to state that  
"The Graphics Interchange Format(c) is the Copyright property of CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated."  
REFERENCES  
We highly recommend reading one or more of these references before trying to understand the innards of the JPEG software.  
The best short technical introduction to the JPEG compression algorithm is  
Wallace, Gregory K. "The JPEG Still Picture Compression Standard",  
Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.  
(Adjacent articles in that issue discuss MPEG motion picture compression, applications of JPEG, and related topics.) If you don't have the CACM issue handy, a PostScript  
file containing a revised version of Wallace's article is available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz. The file (actually a preprint for an article that appeared in  
IEEE Trans. Consumer Electronics) omits the sample images that appeared in CACM, but it includes corrections and some added material. Note: the Wallace article is  
copyright ACM and IEEE, and it may not be used for commercial purposes.  
A somewhat less technical, more leisurely introduction to JPEG can be found in The Data Compression Book by Mark Nelson and Jean-loup Gailly, published by M&T  
Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides good explanations and example C code for a multitude of compression methods including JPEG.  
It is an excellent source if you are comfortable reading C code but don't know much about data compression in general. The book's JPEG sample code is far from industrial-  
strength, but when you are ready to look at a full implementation, you've got one here...  
The best full description of JPEG is the textbook "JPEG Still Image Data Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published by Van Nostrand  
Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG standards (DIS 10918-1 and draft DIS 10918-2). This is  
by far the most complete exposition of JPEG in existence, and we highly recommend it.  
The JPEG standard itself is not available electronically; you must order a paper copy through ISO or ITU. (Unless you feel a need to own a certified official copy, we  
recommend buying the Pennebaker and Mitchell book instead; it's much cheaper and includes a great deal of useful explanatory material.) In the USA, copies of the  
standard may be ordered from ANSI Sales at (212) 642-4900, or from Global Engineering Documents at (800) 854-7179. (ANSI doesn't take credit card orders, but Global  
does.) It's not cheap: as of 1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7% shipping/handling. The standard is divided into two parts, Part 1 being the  
actual specification, while Part 2 covers compliance testing methods. Part 1 is titled "Digital Compression and Coding of Continuous-tone Still Images, Part 1:  
Requirements and guidelines" and has document numbers ISO/IEC IS 10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of Continuous-tone Still Images,  
Part 2: Compliance testing" and has document numbers ISO/IEC IS 10918-2, ITU-T T.83.  
Some extensions to the original JPEG standard are defined in JPEG Part 3, a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG currently does not  
support any Part 3 extensions.  
The JPEG standard does not specify all details of an interchangeable file format. For the omitted details we follow the "JFIF" conventions, revision 1.02. A copy of the JFIF  
spec is available from:  
Literature Department  
C-Cube Microsystems, Inc.  
1778 McCarthy Blvd.  
Milpitas, CA 95035  
phone (408) 944-6300, fax (408) 944-6314  
A PostScript version of this document is available by FTP at ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz. There is also a plain text version at ftp://ftp.uu.net/graphics/jpeg/  
jfif.txt.gz, but it is missing the figures.  
65  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The TIFF 6.0 file format specification can be obtained by FTP from ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme found in the TIFF 6.0 spec of  
3-June-92 has a number of serious problems. IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). Instead, we recommend the JPEG design  
proposed by TIFF Technical Note #2 (Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or from ftp://ftp.uu.net/graphics/jpeg/. It is expected that  
the next revision of the TIFF spec will replace the 6.0 JPEG design with the Note's design. Although IJG's own code does not support TIFF/JPEG, the free libtiff library uses  
our library to implement TIFF/JPEG per the Note. libtiff is available from ftp://ftp.sgi.com/graphics/tiff/.  
07  
ARCHIVE LOCATIONS  
The "official" archive site for this software is ftp.uu.net (Internet address 192.48.96.9). The most recent released version can always be found there in directory graphics/  
jpeg. This particular version will be archived as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz. If you don't have direct Internet access, UUNET's archives are also available  
via UUCP; contact [email protected] for information on retrieving files that way.  
Numerous Internet sites maintain copies of the UUNET files. However, only ftp.uu.net is guaranteed to have the latest official version.  
You can also obtain this software in DOS-compatible "zip" archive format from the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or on CompuServe  
in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 JPEG Tools. Again, these versions may sometimes lag behind the ftp.uu.net release.  
The JPEG FAQ (Frequently Asked Questions) article is a useful source of general information about JPEG. It is updated constantly and therefore is not included in this  
distribution. The FAQ is posted every two weeks to Usenet newsgroups comp.graphics.misc, news.answers, and other groups. It is available on the World Wide Web at  
http://www.faqs.org/faqs/jpeg-faq/ and other news.answers archive sites, including the official news.answers archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/  
news.answers/jpeg-faq/. If you don't have Web or FTP access, send e-mail to [email protected] with body  
send usenet/news.answers/jpeg-faq/part1  
send usenet/news.answers/jpeg-faq/part2  
RELATED SOFTWARE  
Numerous viewing and image manipulation programs now support JPEG. (Quite a few of them use this library to do so.) The JPEG FAQ described above lists some of the  
more popular free and shareware viewers, and tells where to obtain them on Internet.  
If you are on a Unix machine, we highly recommend Jef Poskanzer's free PBMPLUS software, which provides many useful operations on PPM-format image files. In  
particular, it can convert PPM images to and from a wide range of other formats, thus making cjpeg/djpeg considerably more useful. The latest version is distributed by  
the NetPBM group, and is available from numerous sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/. Unfortunately PBMPLUS/NETPBM is  
not nearly as portable as the IJG software is; you are likely to have difficulty making it work on any non-Unix machine.  
A different free JPEG implementation, written by the PVRG group at Stanford, is available from ftp://havefun.stanford.edu/pub/jpeg/. This program is designed for research  
and experimentation rather than production use; it is slower, harder to use, and less portable than the IJG code, but it is easier to read and modify. Also, the PVRG code  
supports lossless JPEG, which we do not. (On the other hand, it doesn't do progressive JPEG.)  
FILE FORMAT WARS  
Some JPEG programs produce files that are not compatible with our library. The root of the problem is that the ISO JPEG committee failed to specify a concrete file format.  
Some vendors "filled in the blanks" on their own, creating proprietary formats that no one else could read. (For example, none of the early commercial JPEG  
implementations for the Macintosh were able to exchange compressed files.)  
The file format we have adopted is called JFIF (see REFERENCES). This format has been agreed to by a number of major commercial JPEG vendors, and it has become  
the de facto standard. JFIF is a minimal or "low end" representation. We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF Technical Note #2) for  
"high end" applications that need to record a lot of additional data about an image. TIFF/JPEG is fairly new and not yet widely supported, unfortunately.  
The upcoming JPEG Part 3 standard defines a file format called SPIFF. SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should be able to read the  
most common variant of SPIFF. SPIFF has some technical advantages over JFIF, but its major claim to fame is simply that it is an official standard rather than an informal  
one. At this point it is unclear whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto standard. IJG intends to support SPIFF once the standard is  
frozen, but we have not decided whether it should become our default output format or not. (In any case, our decoder will remain capable of reading JFIF indefinitely.)  
Various proprietary file formats incorporating JPEG compression also exist. We have little or no sympathy for the existence of these formats. Indeed, one of the original  
reasons for developing this free software was to help force convergence on common, open format standards for JPEG files. Don't use a proprietary file format!  
TO DO  
The major thrust for v7 will probably be improvement of visual quality. The current method for scaling the quantization tables is known not to be very good at low Q values.  
We also intend to investigate block boundary smoothing, "poor man's variable quantization", and other means of improving quality-vs-file-size performance without  
sacrificing compatibility.  
In future versions, we are considering supporting some of the upcoming JPEG Part 3 extensions --- principally, variable quantization and the SPIFF file format.  
As always, speeding things up is of great interest.  
Please send bug reports, offers of help, etc. to [email protected].  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your  
freedom to share and change free software - to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's  
software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License  
instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute  
copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of  
it in new free programs; and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain  
responsibilities for you if you distribute copies of the software, or if you modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they,  
too, receive or can get the source code. And you must show them these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the  
software.  
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified  
by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the  
original authors' reputations.  
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent  
licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General  
Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under  
copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.  
(Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".  
66  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted,  
and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).  
Whether that is true depends on what the Program does.  
07  
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish  
on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and  
give any other recipients of the Program a copy of this License along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or  
work under the terms of Section 1 above, provided that you also meet all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a  
whole at no charge to all third parties under the terms of this License.  
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary  
way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a  
warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program  
itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered  
independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when  
you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose  
permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the  
distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or  
distribution medium does not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided  
that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source  
distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial  
distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)  
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source  
code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However,  
as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components  
(compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from  
the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.  
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense  
or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under  
this License will not have their licenses terminated so long as such parties remain in full compliance.  
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its  
derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the  
Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based  
on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute  
or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.  
You are not responsible for enforcing compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you  
(whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you  
cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute  
the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly  
through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a  
whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the  
sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous  
contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide  
if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places  
the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among  
countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to  
the present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have  
the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify  
a version number of this License, you may choose any version ever published by the Free Software Foundation.  
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For  
software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be  
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY  
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE  
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
67  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY  
AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING  
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),  
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
07  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can  
redistribute and change under these terms.  
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and  
each file should have at least the "copyright" line and a pointer to where the full notice is found.  
<one line to give the program's name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software  
Foundation; either version 2 of the License, or (at your option) any later version.  
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS  
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,  
Fifth Floor, Boston, MA 02110-1301 USA.  
Also add information on how to contact you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:  
Gnomovision version 69, Copyright © year name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain  
conditions; type `show c' for details.  
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called  
something other than `show w' and `show c'; they could even be mouse-clicks or menu items - whatever suits your program.  
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample;  
alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful  
to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright © 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee  
your freedom to share and change free software - to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially  
designated software packages - typically libraries - of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first  
think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to  
distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and  
use pieces of it in new free programs; and that you are informed that you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to  
certain responsibilities for you if you distribute copies of the library or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they,  
too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with  
the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step  
method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the  
recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by  
others.  
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free  
program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with  
the full freedom of use specified in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to  
certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries  
into non-free programs.  
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the  
original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public  
License permits more lax criteria for linking other code with the library.  
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other  
free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for  
many libraries. However, the Lesser license provides advantages in certain special circumstances.  
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve  
this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case,  
there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission  
to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU Linux operating system.  
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom  
and the wherewithal to run that program using a modified version of the Library.  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work  
that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run.  
68  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
07  
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it  
may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".  
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions  
and data) to form executables.  
The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library  
or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated  
straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".)  
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all  
modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library  
is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool  
for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.  
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately  
publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any  
warranty; and distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work  
under the terms of Section 1 above, provided that you also meet all of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument  
passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the  
facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose  
that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function  
must be optional: if the application does not supply it, the square root function must still compute square roots.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered  
independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when  
you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose  
permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the  
distribution of derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution  
medium does not bring the other work under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the  
notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version  
2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative  
works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above  
provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2  
above on a medium customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place  
satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.  
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that  
uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.  
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library),  
rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.  
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even  
though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold  
for this to be true is not precisely defined by law.  
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length),  
then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library  
will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work  
also fall under Section 6, whether or not they are linked directly with the Library itself.  
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library,  
and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for  
debugging such modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply  
a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference  
directing the user to the copy of this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which  
must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses  
the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified  
Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to  
use the modified definitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present  
on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the  
user installs one, as long as the modified version is interface-compatible with the version that the work was made with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more  
than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the  
same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.  
For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it.  
However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major  
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.  
69  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a  
contradiction means you cannot use both them and the Library together in an executable that you distribute.  
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and  
distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted,  
and provided that you do these two things:  
07  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under  
the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying  
uncombined form of the same work.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify,  
sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or  
rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.  
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its  
derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the  
Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.  
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute,  
link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted  
herein. You are not responsible for enforcing compliance by third parties with this License.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you  
(whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you  
cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute  
the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through  
you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid  
or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other  
circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the  
sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous  
contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author donor to decide  
if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places  
the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among  
countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in  
spirit to the present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have  
the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify  
a license version number, you may choose any version ever published by the Free Software Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for  
permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our  
decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT  
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY  
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME  
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY  
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING  
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),  
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and  
change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).  
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty;  
and each file should have at least the "copyright" line and a pointer to where the full notice is found.  
<one line to give the library's name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation;  
either version 2.1 of the License, or (at your option) any later version.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A  
PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.  
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,  
Fifth Floor, Boston, MA 02110-1301 USA  
Also add information on how to contact you by electronic and paper mail.  
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter  
the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker.  
<signature of Ty Coon>, 1 April 1990  
Ty Coon, President of Vice  
That's all there is to it!  
70  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Notice on GNU General Public License]  
This product include the software licensed for use under the terms of a GNU General Public License. A copy of the corresponding source code can be obtained by being  
charged the fee for distribution.  
07  
To obtain a copy, contact your local Pioneer Customer Support Center.  
See the GNU website (http://www.gnu.org) for details of the GNU General Public License.  
71  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer  
Authorized Independent Service Company, or if you wish to purchase replacement parts,  
operating instructions, service manuals, or accessories, please call the number shown  
below.  
1 – 8 0 0 – 4 2 1 – 1 4 0 4  
Please do not ship your product to Pioneer without first calling the Customer Support at the  
above listed number for assistance.  
Pioneer Electronics Service, Inc.  
P.O. BOX 1760, Long Beach,  
CA 90801-1760, U.S.A.  
For warranty information please see the Limited Warranty sheet included with your product.  
Should this product require service in Canada, please contact a Pioneer Canadian  
Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada.  
Alternatively, please contact the Customer Satisfaction Department at the following address:  
Pioneer Electronics of Canada, Inc.  
Customer Satisfaction Department  
300 Allstate Parkway, Markham, Ontario L3R 0P2  
1-877-283-5901  
905-479-4411  
For warranty information please see the Limited Warranty sheet included with your product.  
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisé  
Pioneer du Canada pour obtenir le nom du Centre de Service Autorisé Pioneer le plus près  
de chez-vous. Vous pouvez aussi contacter le Service à la clientèle de Pioneer:  
Pioneer Électroniques du Canada, Inc.  
Service Clientèle  
300, Allstate Parkway, Markham, Ontario L3R 0P2  
1-877-283-5901  
905-479-4411  
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la  
garantie restreinte qui accompagne le produit.  
S018_C_EF  
Register Your Product on  
http://www.pioneerelectronics.com (US)  
http://www.pioneerelectronics.ca (Canada)  
PIONEER CORPORATION  
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan  
PIONEER ELECTRONICS (USA) INC.  
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404  
PIONEER ELECTRONICS OF CANADA, INC.  
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300  
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.  
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270  
K002_B_En  
PIONEER, ELITE, and the PIONEER and ELITE logos are  
registered trademarks of Pioneer Corporation.  
Published by Pioneer Corporation.  
Copyright © 2008 Pioneer Corporation.  
All rights reserved.  
<08F00001>  
<VRB1502-A>  
Printed in Japan  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Electric Shaver 6863XL User Manual
Philips Flat Panel Television 15PFL4122 User Manual
Philips Portable CD Player AX2506 User Manual
Philips VCR VR299 75 User Manual
Pioneer Car Stereo System XR P340M User Manual
Polk Audio Stereo Amplifier PA2004 User Manual
Polycom Computer Hardware 3725 23487 003 A User Manual
Poulan Snow Blower 416804 User Manual
PYLE Audio Car Video System PLHR78W User Manual
PYLE Audio Car Video System PLVWR1982 User Manual