Pioneer DJ Equipment SEP C1 User Manual

SOFTWARE ENTERTAINMENT CONTROLLER  
SEP-C1  
DJS Control Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Chapter 1 Controlling DJS  
It is necessary to install the driver software before connecting a SEP-C1 to your  
computer. Please do not connect the SEP-C1 to your computer until you have finished  
installing the driver software.  
For information on how to install the driver software, please refer to ABOUT THE  
DRIVER PROGRAMin the Operating Instructions of your SEP-C1.  
Warning!  
Updating your Version of DJS  
In order to use your SEP-C1 in conjunction with  
DJS, it is necessary to update DJS to version  
1.600 or later. Please refer to the DJS User’s  
Manual for directions on how to update your  
version of DJS.  
When 2 or more SEP-C1s are connected  
If you connect two or more SEP-C1s to your computer, only the first SEP-C1 will be  
able to operate DJS.  
1-1 Connecting to your SEP-C1 to a computer  
Warning!  
Connect the SEP-C1 to your computer with a USB cable and a USB auxiliary power cable. For  
information on each of the cables that come with the SEP-C1 as well as each type of the SEP-C1’s  
cable jacks, please refer to CONNECTIONSin the operating instructions of your SEP-C1.  
SEP-C1 Power Supply  
The power for the SEP-C1 is supplied from a  
USB port on your computer. Connect the USB  
cable and USB auxiliary power cable directly to  
your computer’s USB ports. Do not connect them  
to a USB hub or any other kind of USB splitter.  
1 Connect the 5V connector on the back of your SEP-C1 to the USB  
port on your computer with a USB auxiliary power cable.  
Starting up DJS  
Start up DJS after making the connections to the  
of your SEP-C1.Also,take care to close DJS  
before disconnecting of your SEP-C1.  
2 Connect the PC connector on the back of your SEP-C1 to the USB  
port on your computer with a USB cable.  
3 Start up your computer.  
• It is also possible to start up your computer first and then make the connections to  
your SEP-C1.  
DJS Ver. 1.601  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1
1-2 Operating a DJS Player  
You can use your SEP-C1 to operate either Player A or Player B on the [DJ Play] screen.  
Note  
Spin (when in scratch mode)  
1 Start up DJS.  
If you spin the jog dial of your SEP-C1 very  
quickly, even after you let go of it, it will continue  
playing at the speed and in the direction that the  
jog dial is rotating until it stops. You cannot do  
this spin play with the mouse.  
• Once DJS starts up, the [DJ Play] screen is displayed.  
2 Operate either Controller A or Controller B.  
• When you operate the various controls on your SEP-C1, such as the jog dial or the  
tempo control slider, it operates the player in the [DJ Play] screen.  
Simultaneous Operations  
The following operations can be performed at the  
same time from the SEP-C1.  
If you rotate the jog dial while holding down  
the SEARCH button, it accelerates the search  
play speed.  
While playing a cue point sample, if you hold  
down the CUE button, you can operate controls  
like the jog dial or the PITCH BEND button.  
When playing a cue point sample, if you hold  
down the CUE button and the press the PLAY  
button, even if you let go of the CUE button, it  
keeps on playing without returning to the cue  
point.  
Controller B  
Controller A  
When playing a cue point sample, if you hold  
down the CUE button and press a loop  
operating button (IN/CUE), the playback point  
is recorded as the cue point. When you release  
the CUE button, it returns to the cue point and  
stands by.  
When you are in the SCRATCH JOG mode, if  
you hold down the jog dial and press the CUE  
button, the playback point is recorded as the  
CUE point. When you release the jog dial, it  
returns to the cue point and stands by.  
When in the SCRATCH JOG mode, if you hold  
down the jog dial and press a loop operating  
button (IN/CUE), the playback point is  
recorded as the cue point. Even when you  
release the jog dial, it continues playing  
without returning to the CUE point.  
Functions that are Linked with the [DJ Play] Screen (Player Functions)  
SEP-C1 Operation Buttons  
PLAY/PAUSE  
CUE  
Controls Linked on the [DJ Play] Screen  
PLAY/PAUSE Button  
CUE Button  
SEARCH  
SEARCH Buttons  
TRACK SEARCH  
TIME/A.CUE  
TRACK SEARCH Buttons  
TIME MODE / AUTO CUE Button  
IN/CUE Button  
IN/CUE  
OUT/ADJUST  
RELOOP/EXIT  
MASTER TEMPO  
OUT/ADJUST  
RELOOP/EXIT  
MASTER TEMPO Button  
TEMPO Control Range Button  
TEMPO Control Slider  
Jog Dial  
Unlinked Player Functions  
The following SEP-C1 buttons do not link up with  
the [DJ Play] screen.  
CUE/LOOP MEMORY Button  
CUE/LOOP CALL Button  
JOG DIAL Button  
TEMPO ±6/10/16/WIDE  
TEMPO  
JOG (–REV/+FWD)  
PITCH BEND  
PITCH BEND Button  
SCRATCH Button  
SCRATCH  
EJECT Button  
For information on functions of buttons, please refer to Parts and Their Functions”  
in the SEP-C1 operating instructions and in the DJS User Manual.  
DJS Ver. 1.601  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1
1-3 Operating a DJS List  
You can use the SEP-C1 to operate track lists or play lists on the [DJ Play] screen.  
Note  
3 Function Buttons (6) :  
- [ All ]  
Track Lists and Play Lists  
1
BROWSE button  
The format of music lists can be switched on the  
[Play Style] settings screen in DJS Preferences.  
On the settings menu on the left hand side of  
Preferences, click [Play Style] to open the [Play  
Style] settings screen.  
- [ (Category 1) ]  
- [ (Category 2) ]  
- [ (Category 3) ]  
- [ (Category 4) ]  
- [ (Category 5) ]  
2 Center Display  
BROWSE Button  
If you press the BROWSE button, the BROWSE  
screen is displayed in the center display.  
4Select UP button  
5 Select DOWN button  
6
Rotary Selector  
Function Button  
In the [BROWSE] screen the function for directly  
selecting and displaying a category is assigned.  
7 LOAD A Button  
8 LOAD B Button  
1 Press the BROWSE button.  
2 Operate the track list or play list.  
You can use the controls of your SEP-C1, like the function buttons, the rotary  
selector, select DOWN or UP buttons to work with the track list or play list that is  
displayed in the [DJ Play] screen.  
Connect the USB port on the back of your SEP-C1’s control unit to a USB port on  
your computer with a USB cable.  
Note  
Selecting a category (only with track lists)  
Display of Category Columns  
The headers that are displayed at the top of the category column in the track list  
on the [DJ Play] screen, namely [All] and the five categories, are automatically  
assigned to the six function buttons. When you press a function button, the songs  
in the corresponding category are displayed.  
The category columns on the [DJ Play] screen are  
displayed in the order of [All], [Artist-Album],  
Top Category and Other Categories.  
The display order of the Top Category can be  
switched by dragging and dropping it on the [DJ  
Play] screen.  
Aligning the selected line with the song you want to play  
Vertical Scrolling  
SEP-C1 Operation Buttons  
Rotary Selector (Rotate)  
Functions that are Linked with the [DJ Play] screen  
Rotate it clockwise and the selected line moves downwards.  
Rotate it counterclockwise and the selected line moves  
upwards.  
If you move the selected line to the top (or the  
bottom), the list will scroll vertically and display  
the selected line.  
When using a play list  
When the format of the music list is in Play List,  
the line cannot be moved to the left or right. If you  
press the select DOWN button, the list gets wider;  
if you press the select UP button, the list gets  
narrower.  
Select DOWN button (Push)  
Select UP button (Push)  
Rotary Selector (Rotate)  
If a list is closed, it opens the list.  
If a list is open, the line moves to the right.  
If a list is open, the line moves to the left.  
If you move it to the last line on the left, it closes the list.  
If the selected line is on a category, such as genre, artist/  
album, etc., it displays the list of songs in the selected  
category.  
If the selected line is on a song, the three choices,  
[CANCEL], [LOAD A] and [LOAD B] are shown on the  
center display.  
Note  
3 After lining up the selected line on the song you wish to play, press  
either the LOAD A or the LOAD B button.  
• LOAD A Button (Loads a song) :  
When using a play list  
When the format of the music list is in Play List,  
the selected song is loaded and goes into standby  
mode.  
The selected song is loaded onto DJS Player A.  
• LOAD B Button (Loads a song) :  
The selected song is loaded onto DJS Player B.  
LOAD LOCK Settings  
When the SEP-C1’s LOAD LOCK settings is ON,  
songs cannot be loaded onto the player that is  
currently playing. Songs can only be loaded when  
the player is in either standby or paused. For  
information on turning the LOAD LOCK setting  
ON/OFF, please refer to USING THE UTILITY”  
in your SEP-C1 Operating Instructions.  
Using the Rotary Selector  
You can use the rotary selector dial for operations instead of pressing the LOAD A  
or LOAD B buttons.  
1 With the selected line on the song you wish to play, if you press the rotary selector,  
the three choices [CANCEL], [LOAD A] and [LOAD B] are displayed in the  
center  
2 Rotate the rotary selector dial to select [LOAD A] (or [LOAD B]) and then when  
you press the rotary selector dial, the selected song is loaded on Player A (or  
Player B).  
DJS Ver. 1.601  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1
1-4 Operating the DJS Mixer  
You can use the SEP-C1 to operate the mixer on the [DJ Play] screen in DJS.  
Note  
DJS Mixer Functions (Internal Mixer)  
2 Function Buttons (6) :  
1 MIX Button  
When you use the DJS mixer functions, it makes  
the DJS settings on the internal mixer. For more  
information, please refer to sections 1-1 Using  
the DJS Mixer Functionand 8-4 Mixer and  
Sound Card Settingsin your DJS User’s Manual.  
-CUT-IN]  
-ZIP]  
-ECHO]  
-CROSS FADE]  
-BPM SYNC]  
-EMPTY)  
MIX Button  
If you press the MIX button, the MIX screen is  
displayed in the center display.  
4 Select DOWN button  
3 Select UP button  
5
Rotary Selector  
Function Buttons  
On the [MIX] screen, four mix mode selections  
and BPM sync are assigned.  
6 LOAD A Button  
7 LOAD B Button  
When using an external mixer  
1 Press the MIX button.  
Only the BPM sync function can be used when  
the DJS mixer is set to an external mixer.  
2 Set the mixing parameters.  
• Use the function buttons, select UP button, and select DOWN button to set up  
mixing.  
Note  
Master & Slave  
Functions that are Linked with the [DJ Play] Screen (Mix Functions)  
The first player that starts playing is the master,  
the other player becomes the slave. The master  
and slave switch roles under the following  
circumstances.  
When the cross fader is moved all the way to  
the slave side  
SEP-C1 Operation Buttons  
Function [CUT-IN]  
Functions that are Linked with the [DJ Play] screen  
MIX Mode : CUT-IN  
Function [ZIP]  
MIX Mode : ZIP  
Function [ECHO]  
MIX Mode : ECHO  
When the master is paused while both players  
Function [CROSS FADE]  
Function [BPM SYNC]  
MIX Mode : CROSS FADE  
The playback speed for the slave is merged to that of the  
master.  
are playing together  
When the song on the master is changed while  
both players are playing together  
Select UP Button  
BEAT ADJUST : Player A  
BEAT ADJUST : Player B  
BEAT Adjust  
(Player A - Player B)  
Select DOWN Button  
While listening to the song being played, set the  
beat location. Press either the select UP or the  
select DOWN button on the first beat of a 4-count.  
3 Press either the LOAD A or the LOAD B button.  
• LOAD A Button (Start Mix or Auto Mix) :  
Switching between MIX and AUTO  
MIX  
Toggle between Mix and Auto Mix by right-  
clicking on either the [Mix] or the [Auto Mix]  
button on the [DJ Play] screen.  
Starts the cross fader in the [DJ Play] screen moving from the Player B side toward  
Player A. When Player A is the master, it does not start moving.  
While it is moving, if you decide you want to return in the other direction, press the  
LOAD B button.  
Mix  
• LOAD B Button (Start Mix or Auto Mix) :  
The cross fader moves in the specified number of  
beats.  
Starts the cross fader in the [DJ Play] screen moving from the Player A side toward  
Player B. When Player B is the master, it does not start moving.  
While it is moving, if you decide you want to return in the other direction, press the  
LOAD A button.  
Auto Mix  
The cross fader moves in the specified number of  
beats. During Auto Mix, the playback speed and  
beat position of the slave are automatically  
synchronized with the playback speed and beat  
position of the master.  
Specify the speed of cross fader movement (beats).  
The cross fader movement speed (beats) can be specified for each mix mode. If  
you press the rotary selector, the menu for selecting the possible beats is  
displayed on the [DJ Play] screen; rotate the rotary selector to your selection and  
then press the rotary selector.  
Manual Operation of the Cross Fader  
Instead of pressing the LOAD A or the LOAD B buttons, you can rotate the rotary  
selector to manually move the cross fader. Rotating it clockwise moves the cross  
fader’s slider to the right, counterclockwise to the left.  
During a Mix or even an Auto Mix, you can rotate the rotary selector to move the  
cross fader manually.  
DJS Ver. 1.601  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1
1-5 Operating the DJS Effecter  
You can use the SEP-C1 to operate the Effecter on the [DJ Play] screen in DJS.  
Note  
2 Function Buttons (6) :  
EFFECT Button  
-INPUT SELECT]  
-DELAY/ECHO]  
-PAN/TRANS]  
1
EFFECT Button  
If you press the EFFECT button, the EFFECT  
sscreen is displayed in the center display.  
-FILTER/FRANGER]  
-REVERB/PITCH]  
-AUTO/TAP]  
Function Buttons  
In the EFFECT screen, the eight effect selections,  
channel switching and BPM display switching  
are assigned.  
4 Select DOWN button  
3 Select UP button  
Rotary Selector  
When using an external mixer  
The EFFECT screen cannot be used when the DJS  
mixer is set to an external mixer.  
5
6 LOAD A Button  
7 LOAD B Button  
1 Press the EFFECT button.  
2 Set the effect parameters.  
• Use the function buttons, LOAD A button, LOAD B button, select UP and select  
DOWN buttons to make the settings.  
Note  
Channel Switching  
Functions that are Linked with the [DJ Play] Screen (Effect Functions)  
Select the channel for applying the sound effects,  
from among channel A, channel B and the master.  
SEP-C1 Operation Buttons  
Function [INPUT SELECT]  
Function [DELAY / ECHO]  
Function [PAN / TRANS]  
Functions that are Linked with the [DJ Play] screen  
Switches Channels : Channel A, Channel B, Master  
Select Effect : Delay / Echo  
Effect Selection  
You can select from the eight kinds of effects that  
are assigned to the four function buttons.  
Select Effect : Pan / Trans  
Function [FILTER / FRANGER] Select Effect : Filter / Franger  
BPM Display Switch  
You can select a BPM (beat per minute) display  
that is either AUTO or TAP.  
Function [REVERB / PITCH]  
Function [AUTO / TAP]  
LOAD A Button  
Select Effect : Reverb / Pitch  
Switches BPM Display : AUTO / TAP  
TAP Input  
BPM (AUTO)  
The BPM value that is detected in the song on the  
selected channel is displayed.  
LOAD B Button  
TAP Input  
Select UP Button  
Effect Beat : Down  
Effect Beat : Up  
Select DOWN Button  
BPM (TAP)  
When you press either the LOAD A or LOAD B  
button twice or more in succession, the interval  
between presses is displayed as the BPM.  
3 Operating with the Rotary Selector  
• If you rotate the rotary selector, you can adjust the level and depth of effects  
(balance between the original music on the selected channel and the sound effect of  
the selected effect).  
Effect Beat  
The cycle (timing) of the sound effects, such as  
reverb, transition and echo, is set based on the  
displayed BPM. This cycle (timing) can be  
adjusted using the select UP or the select DOWN  
buttons. However, if the pitch is selected in the  
effect selection, you can use the select UP or  
select DOWN buttons to adjust the pitch.  
• If you press the rotary dial, the effect comes ON and the sound effect is output on  
the selected channel. Pressing it again makes the effect go OFF.  
DJS Ver. 1.601  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Warning!  
Chapter 2 Upgrading SEP-C1  
The software that is originally incorporated into hardware products such as the  
SEP-C1 and is used to control the hardware is called firmware.  
Once you complete the DJS user registration process, you can update the version of  
your SEP-C1’s firmware.  
In Windows Vista  
Follow the steps below to make the administrator  
settings.  
1. Log on as a user who has been established as  
the administrator for the computer.  
2. Right click the [DJS] shortcut icon on the  
desktop and then click on [Properties].  
3. Click the [Compatibility] tab in the [DJS  
Properties].  
Before registering the user and updating the firmware version  
4. Click on [Run this program as the  
administrator.] so the check box is ON.  
5. Click [OK] and then close the [DJS Properties]  
window.  
Log on to your computer as a user with administrator privileges and connect the  
computer to the internet.  
2-1 User Registration  
Note  
The trial period for using DJS without registering a user is 60 days. Once this period expires,  
you will not be able to use DJS. So, please complete user registration within sixty days of  
installing DJS. Once you complete user registration, support services such as version updating  
become available to you. ‘Using the Support Site’  
After the Trial Period Ends  
Once the 60 days elapse, DJS will not start up and  
a message prompting you to register a user is  
displayed.  
1 After clicking [Help] on the DJS menu, click [User Registration].  
• Once you click [User Registration], the [User Registration Selections] screen  
opens.  
Note  
2 After the [User Registration Selections] screen opens, click [Online  
Privacy Protection Policy  
The personal information of our customers is  
collected by the Pioneer Group for the  
following purposes.  
Registration] and then [Next].  
• After you click [Next], the [Online Registration] screen opens.  
sa  
1. In order to provide after sales service on  
purchased products.  
2. In order to send our customers emails with  
important information about our products or  
related events.  
3. In order to reflect the results of customer  
questionnaires in our product design.  
Pioneer maintains strict controls over the personal  
information we collect from our customers, in line  
with our Privacy Protection Policy. To view the  
Pioneer Privacy Protection Policy, please visit our  
privacy.html).  
Offline Registration (Key Code  
Display)  
After you click [Offline Registration] and  
[Display Key Code], when you click [Next], the  
[Key Code] screen opens. Write the key code on  
the User Registration Card and mail it.  
If you don’t have internet access (Offline Registration)  
If for some reason, such as not having internet access, you cannot register online,  
please fill out the User Registration Card with your key code and the necessary  
information and mail it in. After we receive your user registration card at our offices, we  
will send you a registration ID so you can release the trial period.  
Offline Registration (Entering the  
Registration ID)  
After you click [Offline Registration] and [Enter  
Registration ID], when you click [Next], the  
[Enter your Registration ID] screen opens. Please  
enter the registration ID that we sent to you.  
3 Fill in the required information on the [Online Registration] screens  
and then click [Send].  
• [Online Registration] consists of three screens, namely User Information 1/2, User  
Information 2/2 and a Confirmation of Information screen.  
• When you click [Send], the information you entered will be registered on our  
server and the [Registration ID Complete] message will be displayed.  
Warning!  
4 After the [Registration ID Complete] message is displayed, click [OK].  
User Information (Login Name and  
Password)  
• Once you click [OK], the [Registration ID Complete] message closes.  
Please take care so you do not forget the Login  
Name and Password you entered as user  
information because you will need them in order  
to receive service, such as for updating software  
versions, etc.  
DJS Ver. 1.601  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
2
2-2 Updating the Firmware  
You can use DJS to update the firmware of your SEP-C1 to the latest version.  
In order to download the update package and run the update program, connect your  
computer to the internet and Log on as a user who has been set up as a computer  
administrator.  
Warning!  
In Windows Vista  
Follow the steps below to make the administrator  
settings.  
1. Log on as a user who has been established as  
the administrator for the computer.  
2. Right click the [DJS] shortcut icon on the  
desktop and then click on [Properties].  
3. Click the [Compatibility] tab in the [DJS  
Properties].  
4. Click on [Run this program as the  
administrator.] so the check box is ON.  
5. Click [OK] and then close the [DJS Properties]  
window.  
Before Updating the Version of the Firmware  
If you have not complete the user registration process, you will not be able to run the  
updater for your SEP-C1.  
Consequently, please complete user registration. ‘2-1 User Registration’  
Before starting up DJS, connect your SEP-C1 and your computer with an auxiliary USB  
power cable and then connect the SEP-C1 and the computer with a USB cable.  
When you have two or more SEP-C1s  
Before connecting your SEP-C1  
It is necessary to install driver software on your  
computer. Please do not connect the SEP-C1 to  
your computer until you have finished installing  
the driver software. For information on how to  
install the driver software, please refer to  
ABOUT THE DRIVER PROGRAMin the  
Operating Instructions of your SEP-C1.  
It is not possible to update more than one SEP-C1 at a time. So please connect one  
unit to your computer at a time.  
Note  
1 After clicking [Help] on the DJS menu, click [Version Up].  
Login Name and Password  
• Once you click [Version Up], it checks our server for whether there is an update  
package or not; if there is, the [Update Package Detected] screen opens.  
• If there is not an update package newer than the version currently being used, it is  
not possible to update the software.  
Once you access our server, you will prompted for  
the Login Name and the Password you specified  
when you registered as a user.  
Note  
2 After the [Update Package Detected] screen opens, click the [SEP-C1  
Firmware] check box ON and then click [Yes].  
Multiple Update Packages  
If update packages other than the firmware for  
your SEP-C1 are detected, such as for the DJS  
software, the manual, SEP-C1 driver software,  
and so on, they will be displayed all together in  
the [Update Package Detected] screen.  
• Once you click [Yes], the update package start downloading. Once the download  
finishes, the [Starting Version Update] message opens.  
If you click their check box(es) and select them,  
the selected update packages are downloaded and  
one update runs after another.  
Update package detected when DJS  
starts up  
If you log on to your computer as a user with  
administrator privileges and your computer is  
connected to the internet and your SEP-C1 is  
connected to your computer, every time you start  
up DJS, it will check our server to see if there are  
any update packages; if there are, the [Update  
Package Detected] screen will open.  
3 After the [Starting Version Update] message is displayed, click [OK].  
• Once you click [OK], the update starts. Once the update finishes, the [Update  
Complete] message opens.  
Note  
4 After the [Update Complete] message is displayed, click [OK].  
Starting and Finishing Updates  
• Once you click [OK], the [Update Complete] message closes.  
If you selected more than one update package, the  
Starting Update and Update Complete messages  
are displayed repeatedly. If an update package for  
DJS software is selected, DJS will close  
5 After closing down DJS, remove both the USB auxiliary power cable  
and the USB cable from your SEP-C1 and your computer.  
temporarily and then start back up automatically.  
Checking the Firmware Version  
For information on how to check your SEP-C1’s  
firmware version, please refer to USING THE  
UTILITYin the SEP-C1 Operating Instructions.  
If you fail to close down DJS and completely  
disconnect your SEP-C1 and the computer, the  
firmware upgrade will not take effect.  
DJS Ver. 1.601  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Using the Support Site  
Before contacting us about how to use DJS or with technical questions, please check the User’s Manual recorded on the DJS CD-ROM as well  
as the FAQ on the DJS support site.  
To connect to the DJS support site, click [File] on the DJS menu and then click [Internet].  
When using the DJS support site, it is necessary to enter the login name and password you specified when you registered as a DJS user.  
When using the DJS support site, please have the following details at hand when you contact us: customer’s name, product name,  
installation key, model and specs of the computer (CPU, amount of memory, peripheral devices connected, etc.), version of the operating  
system and a detailed description of the problem you are experiencing.  
We are only able to provide support for DJS users who have completed user registration. Please take care of the login name and password  
you specified during user registration in the same way as the installation key and registration ID so you do not forget them.  
* For information about installation of DJS or how to complete user registration, please refer to the User’s Manual that is recorded on  
the DJS CD-ROM.  
If you experience difficulties in installing the software or completing user registration, please refer to our home page on the internet.  
Information on Installation and User Registration  
* If you have questions about your computer, peripheral devices or technical questions, such as about combinations with products  
other than those we support, please check with the manufacturer of the device or contact the sales outlet.  
There are DJS version updates scheduled in order to improve the performance and add functionality. By completing the user registration,  
you not only gain access to our support site, but it also allows you to download the updater program. By all means update your version of  
DJS with this updater program so you can always have the latest version to use.  
Trial Period and User Registration  
DJS has a trial period, which lasts for 60 days after installing the software. This trial period is the length of time you can user DJS without  
registering as a user. Once this trial period expires, you will not be able to enjoy using DJS anymore, so be sure to complete user registration  
within 60 days of installing the software.  
Online user registration is available for our customers who are connected to the internet.  
If you do not have an internet connection, please fill out the required information on the oUser Registration Card and mail it in.  
Precautions about Filling in the User Registration card  
•A login name and a password are required in order to make sure of your identity when using our customer support service.  
Please specify an 8 to 10 digit alphanumeric login name and password in the appropriate columns on the user registration card.  
Please affix the Installation Key Sticker for User Registration in the Software Installation Key box on the user registration card.  
Please enter the language you selected when you installed DJS in the Software Language box on the user registration card. The 8  
languages are English, French, German, Italian, Dutch, Spanish, Traditional Chinese and Japanese.  
You can check your Key Code on the DJS screen. ‘Offline Registration (Key Code Display)’  
Transfer the 8 digit alphanumeric code shown on the screen into the Key Code column of the user registration card.  
Please print neatly so it is possible to distinguish between 1 and 7, 1 and the letter I and between 2 and the letter Z. Also, please enter  
the number 0 (zero) with a diagonal line so it may be distinguished from the letter O.  
After we receive your user registration card at our offices, we will send you a registration ID so you can release the trial period.  
DJS Ver. 1.601  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3
Addressing the User Registration Card  
The addresses for user registration cards are as follows. Please take care to use the address appropriate to where you live  
as each region has its own address.  
North America  
PIONEER ELECTRONICS (USA) INC.  
BUSINESS SOLUTIONS DIVISION, PRO AUDIO GROUP  
2265 East 220th Street, Long Beach, CA 90810, U.S.A  
Europe  
PIONEER EUROPE NV  
MULTIMEDIA DIVISION  
Pioneer House, Hollybush Hill, Stoke Poges, Slough SL2 4QP U.K.  
South Asia, Southeast Asia  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
MULTIMEDIA DEPARTMENT  
253 Alexandra Road, #04-01, Singapore 159936  
Hong Kong  
PIONEER (HK) LIMITED  
SALES AND MARKETNG DEPARTMENT  
Suite 901-906, 9th Floor World Commerce Centre, Harbour City 11 Canton Road, Tsim Sha Tsui Kowloon, Hong Kong  
Taiwan  
PIONEER HIGH FIDELITY TAIWAN CO., LTD.  
SALES DIVISION, INDUSTRIAL ELECTRONIC SECTION  
13F, No. 44, Sec. 2, Jhongshan N. Road, Taipei City, Taiwan  
Oceania  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
178-184 Boundary Road, Braeside, Victoria 3195, Australia  
Middle East, Africa  
PIONEER GULF, FZE.  
Lob 11-017, Jabel Ali Free Zone, P.O.Box 61226, Jabel Ali, Dubai, U.A.E.  
Central & South America  
PIONEER INTERNATIONAL LATIN AMERICA, S.A.  
SALES DEPARTMENT  
Plaza Credicorp Bank Panama, 50 Street, #120, 14th Floor  
P.O. Box 0816-01361, Panama, Rep of Panama  
Mexico  
PIONEER ELCTRONICS DE MEXICO, S.A. DE C.V.  
Blvd. Manuel Avila Camacho No. 138, Piso 10, Col. Lomas de  
Chapultepec, Mexico, D.F. C.P. 111000 Deleg. Miguel Hidalgo  
DJS Ver. 1.601  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Registration  
Pioneer Use Only:Your Registration ID  
Thank you for purchasing this PIONEER product! Please complete the following and address to PIONEER. Information indicated by  
bold text is required for registration. When registered, we will send your Registration ID to you by mail. Do not forget these answers.  
Login name  
(at least 8 and not more than 10 characters)  
Password  
(at least 8 and not more than 10 characters)  
Please paste Installation Key sticker  
Software Installation Key  
Software name and version number  
Software language  
Key Code  
E-mail address  
Pioneer collects information about our customers for the following purposes only.  
1. To provide user support services.  
2. To provide customers with information on products and events by e-mail.  
3. To collect questionnaires, analyze them, and use the results for product planning.  
* Private information collected from users is strictly protected in accordance with our Privacy Policy.  
* Please see our policy for protecting your personal information, which may be found on our home page at  
(http:// www.prodjnet.com/privacy.html).  
PIONEER CORPORATION  
Questionnaire  
(Your answers will remain confidential and will be used to make product Improvements, so that we may better serve you.)  
Male  
Female  
Dealer  
Sex  
Age  
Your favorite club  
(Location)  
(Club)  
Which of the following best describes yourself ? (Please select one)  
Club DJ  
Mobile DJ  
Bedroom (Hobby) DJ  
Owner (Shop type:  
)
Other  
year(s)  
How long have you been engaged as a DJ?  
What kind of music will you play on the DJS?  
House  
Trance  
Jungle/Drum & Bass  
Techno  
Ambient  
Hip-Hop/Rap  
Break Beat  
Jazz  
Dance Classic  
Garage  
Rock  
R&B  
Alternative  
Funk  
Latin  
Swing  
Old School  
Wave  
Other  
What magazines do you subscribe to?  
How did you learn about this product?  
Catalog  
Show  
Music instrument shop Audio shop  
PC shop  
Pioneer homepage  
Other  
Dealer's homepage  
Friend  
Magazine  
Why did you decide to buy this product?  
Price  
Size  
Function  
Brand  
Easy operation  
Other  
Reliability  
Design  
Thank you for your answers. Once the user registration is complete, we will send you a registration ID that will  
allow you override the 60 day trial period. Please write your name, address and phone number below.  
Last Name  
First Name  
Middle Name  
Address  
Country  
State, Province  
Telephone  
Postal Code  
FAX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Pentax Digital Camera Optio W20 User Manual
Perle Systems TV Converter Box 5500316 13 User Manual
Philips Flat Panel Television FTR9952 69C User Manual
Philips Radio 201P User Manual
Pioneer DVD Recorder AVH P7500DVD User Manual
Polycom Network Hardware A200 User Manual
Poulan Lawn Mower 183113 User Manual
Poulan Trimmer 115156126 User Manual
Premier Mounts TV Mount RTM C User Manual
PYLE Audio Home Theater System PSWLE81 User Manual