Multi-CD control High power cassette player
with RDS tuner
Manual
KEH-P5900R
KEH-P4930R
KEH-P4900R
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Multi-CD Players .......................29 Initial Setting Menu ............................. 41
•
•
•
•
Repeat Play
Random Play
Scan Play
Pause
Entering the Initial Setting Menu ..................... 41
Initial Setting Menu Functions ......................... 42
•
•
•
•
Changing the FM Tuning Step (FM)
Switching the Auto PI Seek (A-PI)
Switching the AUX Mode (AUX)
Selecting the Illumination Color (ILM)
Disc Title .......................................................... 31
•
•
Disc Title Input
Displaying Disc Title
Playing Discs on a 50-Disc Type
Other Functions ..................................44
Multi-CD Player ............................................ 33
Using the AUX Source .................................... 44
•
•
Selecting the AUX Source
AUX Title Input
Audio Adjustment ...............................34
Selecting the Equalizer Curve .......................... 34
Entering the Audio Menu ................................. 34
Audio Menu Functions ..................................... 35
Cellular Telephone Muting .............................. 44
Cassette Player and Care ................... 45
Precaution ........................................................ 45
•
•
Balance Adjustment (FAD)
Equalizer Curve Adjustment
(EQ-LOW/MID/HIGH)
Loudness Adjustment (LOUD)
Front Image Enhancer Function (FIE)
Source Level Adjustment (SLA)
•
•
About the Cassette Player
About Cassette Tapes
•
•
•
Cleaning the Head ............................................ 45
Specifications ...................................... 47
Detaching and Replacing the
Front Panel .......................................40
Theft protection ................................................ 40
•
•
Detaching the Front Panel
Replacing the Front Panel
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
,QVWDOODWLRQ
1RWHꢃ
•
•
•
•
•
Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up
properly, and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts
can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of
the vehicle.
Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.
Installation with the rubber bush
1. Dashboard
2. Holder
After inserting the holder into the
dashboard, then select the appropriate
tabs according to the thickness of the
dashboard material and bend them.
(Install as firmly as possible using the top
and the bottom tabs. To secure, bend the
tabs 90 degrees.)
3. Rubber bush
4. Screw
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Unit
5. Insert the supplied extraction keys into
the unit, as shown in the figure, until they
click into place.
Keeping the keys pressed against the
sides of the unit, pull the unit out.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
&RQQHFWLQJꢀWKHꢀ8QLWV
1RWHꢃ
•
•
•
•
•
This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a
recreational vehicle, truck, or bus, check the battery voltage.
To avoid shorts in the electrical system, be sure to disconnect the battery cable before beginning
installation.
Refer to the owner's manual for details on connecting the power amp and other units, then make
connections correctly.
Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape
around them where they lie against metal parts.
Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and
seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of
the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body.
Don't pass the yellow lead through a hole into the engine compartment to connect to the battery.
This will damage the lead insulation and cause a very dangerous short.
•
•
•
Do not shorten any leads. If you do, the protection circuit may fail to work when it should.
Never feed power to other equipment by cutting the insulation of the power supply lead of the unit
and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.
When replacing fuse, be sure to use only fuse of the rating prescribed on this unit.
Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded
or the left and right speaker leads are common.
•
•
•
•
Speakers connected to this unit must be high-power types with minimum rating of 40 W and
impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those
noted here may result in the speakers catching fire, emitting smoke or becoming damaged.
When this product's source is switched ON, a control signal is output through the blue/white lead.
Connect to an external power amp's system remote control or the car's Auto-antenna relay control
terminal. (Max. 300 mA 12 V DC.) If the car features a glass antenna, connect to the antenna booster
power supply terminal.
•
•
When an external power amp is being used with this system, be sure not to connect the blue/white
lead to the amp's power terminal. Likewise, do not connect the blue/white lead to the power terminal
of the auto-antenna. Such connection could cause excessive current drain and malfunction.
To avoid short-circuiting, cover the disconnected lead with insulating tape. Especially, insulate the
unused speaker leads without fail. There is a possibility of short-circuiting if the leads are not
insulated.
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side
is black. Connect the connectors of the same colors correctly.
If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition
switch, the red lead of the unit should be connected to a terminal coupled with ignition switch
ON/OFF operations. If this is not done, the vehicle battery may be drained when you are away from
the vehicle for several hours.
ACC position
No ACC position
•
The black lead is ground. Please ground this lead separately from the ground of high-current products
such as power amps. If you ground the products together and the ground becomes detached, there is
a risk of damage to the products or fire.
•
Cords for this product and those for other products may be different colors even if they
have the same function. When connecting this product to another product, refer to the
supplied Installation manuals of both products and connect cords that have the same
function.
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
&RQQHFWLQJꢀWKHꢀ8QLWV
Connection in a car featuring an ISO Connector
You can connect the car stereo power cord as it is.
(Do not use the power cord supplied with this unit.)
Refer to "Connection in a car not featuring an ISO Connector."
Accessory
To electric terminal controlled by ignition
switch (12 V DC)
ON/OFF.
Switch
Back-up
To terminal always supplied
with power regardless of
ignition switch position.
Car stereo power cord.
Attention:
The connector wiring may vary depending on the car manufacturer, even when ISO connectors
are used. We recommend to check the car’s wiring provision before connecting the car stereo.
Please pay particular attention to pin 5, where a misconnection might cause damage to the car or
radio.
Take special care when installing into ’98 or later VW/Audi/Skoda/Seat models as there may be
a 12 V connection on Pin 5, which could damage the car stereo or into Ford from ’97 or later,
with an ISO connector, on which damage to the car’s microcomputers is possible if
misconnected. Use of ISO connector adapters available on the market may facilitate installation.
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the switch
With some cars, it may be necessary to change the switch on the rear of this unit. Refer to the
illustration above to confirm the power cord. With cars in which Back-up and ACC are
reversed, insert the switch in the lower side.
Not used.
Fuse
Switch
ꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
&RQQHFWLRQꢀ'LDJUDP
This product conforms to new cord colors.
Yellow/black
If you use a cellular telephone, connect it via the Audio Mute lead on the
cellular telephone. If not, keep the Audio Mute lead free of any connections.
This product
Rear output
Antenna jack
Fuse
Multi-CD player
(sold separately)
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Yellow
To terminal always supplied with power
regardless of ignition switch position.
Black (ground)
To vehicle (metal) body.
ꢉꢊ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting cords with RCA pin plugs
(sold separately).
To system control terminal of the
power amp or Auto-antenna relay
control terminal.
(Max. 300 mA 12 V DC.)
Power amp
(sold separately)
System remote control
Left speaker
White
Right speaker
Gray
Front
Front
Gray/Black
White/Black
Violet
Green
Rear
Rear
Rear
Green/black
Violet/black
Rear
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Perform these connections
when using a different amp
(sold separately).
ꢉꢉ
Download from Www.Somanuals.com. All Manuals Search And Download.
.H\ꢀ)LQGHU
ꢀ Head Unit
BAND button
LOCAL/BSM button
EJECT button
EQ button
buttons
Cassette door
Detach button
Buttons 1–6
SOURCE/OFF button
+/– button
TA/AF button
DISPLAY button
PTY button AUDIO button
ꢀ Steering Remote Controller (CD-SR77)
The steering remote controller (CD-SR77) is an option only for KEH-P5900R.
ATT button
This lets you quickly
lower volume level
(by about 90%).
Press once more to
return to the original
volume level.
BAND button
buttons
SOURCE/OFF button
button
+/– button
FUNCTION button
Not Used.
AUDIO button
ꢉꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
%HIRUHꢀ8VLQJꢀ7KLVꢀ3URGXFW
About This Product
•
This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE
Marking Directive (93/68/EEC).
The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle
East, Africa and Oceania. Use in other areas may result in improper reception.
The RDS function operates only in areas with FM stations broadcasting RDS signals.
About This Manual
This product features a number of sophisticated functions ensuring superior reception and
operation. All are designed for the easiest possible use, but many are not self-explanatory. This
operation manual is intended to help you benefit fully from their potential and to maximize
your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by reading
through the manual before you begin using this product. It is especially important that you read
and observe the “Precaution” on the next page and in other sections.
This manual explains head unit operation. You can perform the same operations with the
steering remote controller (CD-SR77) only when operating KEH-P5900R. The steering remote
controller offers the convenience of ATT, a function not provided on the head unit.
About Optional Steering Remote Controller
(for KEH-P5900R)
Optional steering remote controller (CD-SR77) for KEH-P5900R has a switch inside the cover
on the back. Use the steering remote controller in the MAIN UNIT position without switching.
(Initially, it is already set to the MAIN UNIT position.) This product will not work properly in
the other positions.
ꢉꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
%HIRUHꢀ8VLQJꢀ7KLVꢀ3URGXFW
Precaution
• The Pioneer CarStereo-Pass is for use only in Germany.
• Keep this manual handy as a reference for operating procedures and precautions.
• Always keep the volume low enough for outside sounds to be audible.
• Protect this product from moisture.
• If the battery is disconnected, the preset memory will be erased and must be reprogrammed.
In Case of Trouble
Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer
Service Station.
ꢉꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
%DVLFꢀ2SHUDWLRQ
To Listen to Music
The following explains the initial operations required before you can listen to music.
1RWHꢃ
•
Loading a cassette in this product. (Refer to page 17.)
ꢉꢋ 6HOHFWꢌWKHꢌGHVLUHGꢌVRXUFHꢌꢍHꢋJꢋꢌ7XQHUꢎꢋ
Each press changes the Source ...
Each press of the SOURCE/OFF button selects the desired source in the following order:
Tuner 3 Tape 3 Multi-CD player 3 External Unit 3 AUX
1RWHꢃ
•
External Unit refers to a Pioneer product (such as one available in the future) that, although
incompatible as a source, enables control of basic functions by this product. Only one External Unit
can be controlled by this product.
•
In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* When no tape is set in this product.
* When no magazine is set in the Multi-CD player.
* When the AUX (external input) is set to OFF. (Refer to page 43.)
When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal, the
car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna, switch
the source OFF.
•
ꢀꢋ 5DLVHꢌRUꢌORZHUꢌWKHꢌYROXPHꢋ
ꢁꢋ 7XUQꢌWKHꢌVRXUFHꢌ2))ꢋ
Hold for 1 second
ꢉꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
%DVLFꢀ2SHUDWLRQ
Basic Operation of Tuner
This product’s AF function can be switched ON and OFF. AF should be switched OFF for
normal tuning operations. (Refer to page 21.)
Manual and Seek Tuning
ꢁ <RXꢌFDQꢌVHOHFWꢌWKHꢌWXQLQJꢌPHWKRGꢌE\ꢌFKDQJLQJꢌWKHꢌOHQJWKꢌRIꢌ
WLPHꢌ\RXꢌSUHVVꢌWKHꢌꢂꢃꢄꢌEXWWRQꢋ
Manual Tuning (step by step)
Seek Tuning
0.5 seconds or less
0.5 seconds or more
1RWHꢃ
•
If you continue pressing the button for longer than 0.5 seconds, you can skip
broadcast stations. Seek Tuning starts as soon as you stop pressing the button.
Stereo indicator " " stereo indicator lights when a stereo station is selected.
•
Frequency Indicator
Preset Number Indicator
Band Indicator
Preset Tuning
Band
FI (FM1) 3 FII (FM2)
3 FIII (FM3)
ꢁ <RXꢌFDQꢌPHPRUL]HꢌEURDGFDVWꢌVWDWLRQVꢌLQꢌEXWWRQVꢌ
ꢉꢌWKURXJKꢌꢅꢌIRUꢌHDV\ꢏꢌRQHꢐWRXFKꢌVWDWLRQꢌUHFDOOꢋ
Preset station recall
2 seconds or less
2 seconds or more
Broadcast station preset memory
1RWHꢃ
•
Up to 18 FM stations (6 in FI (FM1), FII (FM2) and FIII
(FM3)) and 6 MW/LW stations can be stored in memory.
You can also use the or buttons to recall broadcast
stations memorized in buttons 1 through 6.
•
ꢉꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation of Cassette Player
Fast Forward/Rewind and Music Search
ꢁ (DFKꢌSUHVVꢌRIꢌWKHꢌꢄꢌEXWWRQꢌVHOHFWVꢌ)DVWꢌ)RUZDUGꢌRUꢌ)RUZDUGꢐ0XVLFꢌ
6HDUFKꢋ
FF (Fast Forward) 3 F-MS (Forward-Music Search) 3 Normal Playback
ꢁ (DFKꢌSUHVVꢌRIꢌWKHꢌꢂꢌEXWWRQꢌVHOHFWVꢌ5HZLQGꢌRUꢌ5HZLQGꢐ0XVLFꢌ6HDUFKꢋ
REW (Rewind) 3 R-MS (Rewind-Music Search) 3 Normal Playback
1RWHꢃ
•
Fast Forward/Rewind and Music Search can be canceled by pressing the BAND button.
Cassette Loading Slot
Direction Indicator
Direction Change
Eject
1RWHꢃ
•
The Tape function can be turned ON/OFF with
the cassette tape remaining in this product.
(Refer to page 15.)
ꢉꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
%DVLFꢀ2SHUDWLRQ
Basic Operation of Multi-CD Player
This product can control a Multi-CD player (sold separately).
Track Search and Fast Forward/Reverse
ꢁ <RXꢌFDQꢌVHOHFWꢌEHWZHHQꢌ7UDFNꢌ6HDUFKꢌRUꢌ)DVWꢌ)RUZDUGꢑ5HYHUVHꢌ
E\ꢌSUHVVLQJꢌWKHꢌꢂꢃꢄꢌEXWWRQꢌIRUꢌDꢌGLIIHUHQWꢌOHQJWKꢌRIꢌWLPHꢋꢌ
Track Search
0.5 seconds or less
Continue pressing
Fast Forward/Reverse
Play Time Indicator
Disk Search
Disk Number
Indicator
Track Number Indicator
Disc Number Search (for 6-Disc, 12-Disc types)
ꢁ <RXꢌFDQꢌVHOHFWꢌGLVFVꢌGLUHFWO\ꢌZLWKꢌWKHꢌꢉꢌWRꢌꢅꢌEXWWRQVꢋꢌ-XVWꢌSUHVVꢌWKHꢌQXPEHUꢌ
FRUUHVSRQGLQJꢌWRꢌWKHꢌGLVFꢌ\RXꢌZDQWꢌWRꢌOLVWHQꢌWRꢋ
1RWHꢃ
•
When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6
buttons for 2 seconds or longer.
1RWHꢃ
•
The Multi-CD player may perform a preparatory operation, such as verifying the presence of a disc
or reading disc information, when the power is turned ON or a new disc is selected for playback.
"READY" is displayed.
•
•
If the Multi-CD player cannot operate properly, an error message such as "ERROR-14" is displayed.
Refer to the Multi-CD player owner’s manual.
If there are no discs in the Multi-CD player magazine, "NO DISC" is displayed.
ꢉꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
7XQHUꢀRSHUDWLRQ
ꢀ Local Seek Tuning
This function selects only stations with especially strong signals.
ꢁ 6ZLWFKꢌWKHꢌ/RFDOꢌ21ꢑ2))ꢌZLWKꢌ
WKHꢌ/2&$/ꢑ%60ꢌEXWWRQꢋ
ꢀ Best Stations Memory (BSM)
The BSM function stores stations in memory automatically.
ꢁ 3UHVVꢌWKHꢌ/2&$/ꢑ%60ꢌEXWWRQꢌ
IRUꢌꢀꢌVHFRQGVꢌWRꢌVZLWFK
%60ꢌ21ꢋ
The stations with the strongest signals
will be stored under buttons 1– 6 and
in order of their signal strength.
ꢁ 7RꢌFDQFHOꢌWKHꢌSURFHVVꢏꢌSUHVVꢌWKHꢌ/2&$/ꢑ%60ꢌEXWWRQꢌEHIRUHꢌPHPRUL]DWLRQꢌLVꢌ
FRPSOHWHꢋ
ꢉꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
8VLQJꢀ5'6ꢀ)XQFWLRQV
What is RDS?
RDS (Radio Data System) is a system for transmitting data along with FM programs. This data,
which is inaudible, provides a variety of features such as: program service name, program type
display, traffic announcement standby, automatic tuning and program type tuning, intended to
aid radio listeners in tuning to a desired station.
1RWHꢃ
•
•
RDS service may not be provided by all stations.
RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement standby),
are only active when your radio is tuned to RDS stations.
Program Service Name Display
With this function, the names of networks/stations providing RDS services replace the
frequency on the display a few seconds after they are tuned in.
ꢁ :KHQꢌ\RXꢌZDQWꢌWRꢌNQRZꢌ37<ꢌ,QIRUPDWLRQꢌRUꢌWKHꢌIUHTXHQF\ꢌRIꢌWKHꢌFXUUHQWꢌ
VWDWLRQꢏꢌFKDQJHꢌWKHꢌGLVSOD\ꢋ
Each press changes the Display ...
Each press of the DISP button selects the display in the following order:
Program Service Name 3 PTY Information 3 Frequency
1RWHꢃ
•
After switching displays, if you do not perform an operation within 8 seconds, the Program Service
Name is automatically displayed.
ꢅ
PTY Information
PTY (Program Type ID code) information for the currently tuned station appears on the display
for 8 seconds. The information is correlated with the list in the section "PTY Function" on
page 25.
1RWHꢃ
•
If a PTY code of zero is received from a station, "NONE" will be displayed. This indicates that the
station has not defined its program contents.
•
If the signal is too weak for this product to pick up the PTY code, "NO PTY" will be displayed.
ꢅ
Frequency
The frequency of the current station appears on the display.
ꢀꢊ
Download from Www.Somanuals.com. All Manuals Search And Download.
AF Function
The AF (Alternative Frequencies search) function is used to search for other frequencies in the
same network as the currently tuned station. It automatically retunes the receiver to another
frequency in the network which is broadcasting a stronger signal when there are problems with
reception of the currently tuned station or better reception is possible on a different frequency.
1RWHꢃ
•
AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with the
"AF " indicator ON.
•
When you recall a preset station, the tuner may update the preset station with a new frequency from
the station's AF list. (This is only available when using presets on the FM1 band.) No preset number
appears on the display if the RDS data for the station received differs from that for the originally
stored station.
•
•
•
Sound may be temporarily interrupted by another program during an AF frequency search.
When the tuner is tuned to a non-RDS station, the "AF " indicator flashes.
AF can be switched ON or OFF independently for each FM band.
ꢀ Activating/Deactivating the AF Function
AF is set to ON by default.
ꢁ 7XUQꢌ$)ꢌWRꢌ2))ꢋ
Hold for 2 seconds
"AF" disappears
To turn AF back ON, repeat the preceding operation.
ꢀꢉ
Download from Www.Somanuals.com. All Manuals Search And Download.
8VLQJꢀ5'6ꢀ)XQFWLRQV
PI Seek Function
The tuner searches for another frequency broadcasting the same programming. "PI SEEK"
appears on the display and the radio volume is muted during a PI Seek. The muting is
discontinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the
PI Seek is unsuccessful, the tuner returns to the previous frequency.
ꢀ PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too
weak for proper reception, the PI Seek will automatically start.
ꢀ Auto PI Seek (for preset station)
When preset stations cannot be recalled, as when traveling long distances, this product can be
set to perform PI Seek also during preset recall.
The default setting for Auto PI Seek is OFF.
1RWHꢃ
•
Refer to "Initial Setting" for details on how to switch Auto PI Seek ON/OFF.
Regional Function
When AF is used to retune the tuner automatically, REG (regional) limits the selection to
stations broadcasting regional programs.
1RWHꢃ
•
•
•
Regional programming and regional networks are organized differently depending on the country
(i.e., they may change according to the hour, state or broadcast area).
The preset number may disappear on the display if the tuner tunes in a regional station which differs
from the originally set station.
REG can be switched ON or OFF independently for each FM band.
ꢀ Activating/Deactivating the REG Function
The REG function is set to ON by default.
ꢁ 7XUQꢌ5(*ꢌWRꢌ2))ꢋ
Hold for 2 seconds
To turn REG back ON, repeat the preceding operation.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
TA Function
The TA (Traffic Announcement standby) function lets you receive traffic announcements
automatically, no matter what source you are listening to. The TA function can be activated for
either a TP station (a station that broadcasts traffic information) or an EON TP station (a station
carrying information which cross-references TP stations).
ꢀ Activating/Deactivating the TA Function
ꢉꢋ 7XQHꢌLQꢌDꢌ73ꢌRUꢌ(21ꢌ73ꢌVWDWLRQꢋ
The "TP" indicator lights when the tuner is tuned to a TP station or an EON TP station.
ꢀꢋ $FWLYDWHꢌWKHꢌ7$ꢌIXQFWLRQꢋ
"TA"
The "TA" indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to deactivate
the TA function.
1RWHꢃ
•
•
The system switches back to the original source following traffic announcement reception.
The TA function can be activated from sources other than tuner if the tuner was last set to the FM
band but not if it was last set to the MW/LW band.
•
•
•
If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions
while listening to the sources other than tuner.
Only TP or EON TP stations are tuned in during the Seek Tuning mode when the "TA" indicator is
ON.
Only TP or EON TP stations are stored by BSM when the "TA" indicator is ON.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
8VLQJꢀ5'6ꢀ)XQFWLRQV
ꢀ Canceling Traffic Announcements
ꢁ 3UHVVꢌWKHꢌ7$ꢑ$)ꢌEXWWRQꢌZKLOHꢌDꢌWUDIILFꢌDQQRXQFHPHQWꢌLVꢌEHLQJꢌUHFHLYHGꢌWRꢌFDQFHOꢌ
WKHꢌDQQRXQFHPHQWꢌDQGꢌUHWXUQꢌWRꢌWKHꢌRULJLQDOꢌVRXUFHꢋ
The announcement is canceled but the tuner remains in the TA mode until the TA/AF button
is pressed again.
ꢀ Adjusting the TA Volume
When a traffic announcement begins, the volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
ꢁ 6HWꢌWKHꢌYROXPHꢌE\ꢌDGMXVWLQJꢌLWꢌGXULQJꢌUHFHSWLRQꢌRIꢌDꢌWUDIILFꢌDQQRXQFHPHQWꢋ
The newly set volume is stored in memory and recalled for subsequent traffic announcements.
ꢀ TP Alarm Function
About 30 seconds after the "TP" indicator is extinguished due to a weak signal, a 5 second beep
sounds to remind you to select another TP or EON TP station.
ꢁ ,Iꢌ\RXꢌDUHꢌOLVWHQLQJꢌWRꢌWKHꢌWXQHUꢏꢌWXQHꢌLQꢌDQRWKHUꢌ73ꢌVWDWLRQꢌRUꢌ(21ꢌ73ꢌVWDWLRQꢋ
In sources other than tuner, the tuner automatically seeks out the TP station with the strongest
signal in the current area 10 (or 30)* seconds after "TP" disappears from the display.
ꢒꢌ7LPHꢌWDNHQꢌEHIRUHꢌ6HHNꢌEHJLQVꢋ
TA function ON
10 seconds
TA, AF functions ON
30 seconds
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
PTY Function
The PTY function enables you to select stations by the type of programming they broadcast
(PTY Search). It also provides automatic tuning to emergency broadcasts (PTY Alarm).
1RWHꢃ
•
PTY code program types are as follows:
1. NEWS:
2. AFFAIRS:
3. INFO:
News.
Current affairs.
General information and advice.
Sports programs.
4. SPORT:
5. EDUCATE: Educational programs.
6. DRAMA: All radio plays and serials.
7. CULTURE: Programs concerned with any aspect of national or regional culture.
8. SCIENCE:
9. VARIED:
10. POP MUS:
Programs about nature, science and technology.
Light entertainment programs.
Popular music.
11. ROCK MUS: Contemporary modern music.
12. EASY MUS: Easy listening music.
13. L. CLASS:
14. CLASSIC:
15. OTH MUS:
Light classical music.
Serious classical music.
Other types of music, which can’t be categorized.
16. WEATHER: Weather reports/Meteorological information.
17. FINANCE: Stock market reports, commerce, trading etc.
18. CHILDREN: Children’s programs.
19. SOCIAL: Social affairs programs.
20. RELIGION: Religion affairs programs or services.
21. PHONE IN: Phone in based programs.
22. TOURING:
23. LEISURE:
24. JAZZ:
Travel programs, not for announcements about traffic problem.
Programs about hobbies and recreational activities.
Jazz music based programs.
25. COUNTRY: Country music based programs.
26. NAT MUS:
27. OLDIES:
National music based programs.
Oldies music, ’Golden age’based programs.
28. FOLK MUS: Folk music based programs.
29. DOCUMENT: Documentary programs.
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
8VLQJꢀ5'6ꢀ)XQFWLRQV
ꢀ PTY Search Setting Function
ꢉꢋ (QWHUꢌWKHꢌ37<ꢌ6HDUFKꢌVHWWLQJꢌPRGHꢋ
Hold for 2 seconds
The name of a program type appears on the display for 5 seconds.
1RWHꢃ
•
CURRENT sets desired PTY to the program type of the current station (only for RDS stations
broadcasting PTY information).
ꢀꢋ 6HOHFWꢌRQHꢌRIꢌWKHꢌ37<Vꢋ
ꢁꢋ :KHQꢌWKHꢌGHVLUHGꢌSURJUDPPLQJꢌW\SHꢌDSSHDUVꢌRQꢌWKHꢌGLVSOD\ꢏꢌUHWXUQꢌWRꢌWKHꢌ
QRUPDOꢌGLVSOD\ꢋ
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ PTY Search Function
ꢁ ,QLWLDWHꢌDꢌ37<ꢌVHDUFKꢋ
The tuner searches for a station broadcasting the desired PTY.
1RWHꢃ
•
•
The program of some stations may differ from that indicated by the transmitted PTY.
If no station broadcasting the selected programming type is found, "NOTFOUND" is displayed for
about 2 seconds, and the tuner returns to the original station.
ꢀ PTY Alarm
PTY Alarm is a special PTY code for announcements regarding emergencies such as natural
disasters. When the tuner receives the radio alarm code, "ALARM" appears on the display and
the volume adjusts to the TA volume. When the station stops broadcasting the emergency
announcement, the system returns to the previous source.
1RWHꢃ
•
The system switches back to the original source following emergency announcement reception.
ꢀ Canceling Emergency Announcements
ꢁ 3UHVVꢌWKHꢌ7$ꢑ$)ꢌEXWWRQꢌGXULQJꢌHPHUJHQF\ꢌDQQRXQFHPHQWꢌUHFHSWLRQꢌWRꢌFDQFHOꢌWKHꢌ
DQQRXQFHPHQWꢌDQGꢌUHWXUQꢌWRꢌWKHꢌSUHYLRXVꢌVRXUFHꢋ
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
8VLQJꢀWKHꢀ&DVVHWWHꢀ3OD\HU
ꢀ Repeat Play
The repeat mode lets you hear the same song over again.
ꢁ 6ZLWFKꢌWKHꢌ5HSHDWꢌ3OD\ꢌ21ꢑ2))ꢌ
ZLWKꢌWKHꢌ37<ꢌEXWWRQꢌꢋ
“RPT
”
ꢀ Blank Skip
This function fast-forwards to the next song automatically if there is a long period of silence
(12 seconds or longer) between songs.
ꢁ 6ZLWFKꢌWKHꢌ%ODQNꢌ6NLSꢌ21ꢑ2))ꢌ
ZLWKꢌWKHꢌEXWWRQꢌꢄꢋ
ꢀ Radio Intercept
This function allows you to listen to the radio during tape fast-forwarding/rewinding.
1RWHꢃ
•
The radio intercept function does not work during a Music Search operation.
ꢁ 6ZLWFKꢌWKHꢌ5DGLRꢌ,QWHUFHSWꢌ
21ꢑ2))ꢌZLWKꢌWKHꢌEXWWRQꢌꢅꢋ
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
8VLQJꢀ0XOWLꢁ&'ꢀ3OD\HUV
ꢀ Repeat Play
There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD player
Repeat. Default repeat play range is Multi-CD player Repeat.
ꢁ 6HOHFWꢌWKHꢌGHVLUHGꢌUHSHDWꢌSOD\ꢌ
UDQJHꢌZLWKꢌWKHꢌ37<ꢌEXWWRQꢋ
Multi-CD player Repeat (Nothing) 3
One-track Repeat (“RPT
lights) 3 Disc Repeat (“RPT
” indicator
” and
“RPT
”
“DISC” indicators light)
1RWHꢃ
•
If you select other discs during the repeat play, the repeat play range changes to Multi-CD player
Repeat.
•
If you perform Track Search or Fast Forward/Reverse during One-track Repeat, the repeat play range
changes to Disc Repeat.
ꢀ Random Play
Tracks are played at random within the selected repeat play range as explained in “Repeat Play”
above.
ꢁ 3UHVVꢌWKHꢌ37<ꢌEXWWRQꢌIRUꢌꢀꢌ
VHFRQGVꢌWRꢌVZLWFKꢌWKHꢌ5DQGRPꢌ
3OD\ꢌ21ꢑ2))ꢋ
After selecting the desired repeat play
range from those referred to in
“Repeat Play” above, switch Multi-
CD Player Random Play ON.
,QGLFDWRU
“RPT” + “DISC”
Nothing
3OD\ꢌUDQJH
Disc Repeat
Multi-CD player Repeat
1RWHꢃ
•
One-track Repeat changes to the Disc Repeat when you switch the Random Play ON.
ꢀꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
8VLQJꢀ0XOWLꢁ&'ꢀ3OD\HUV
ꢀ Scan Play
In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10
seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is scanned
for about 10 seconds.
ꢉꢋ 3UHVVꢌWKHꢌ/2&$/ꢑ%60ꢌEXWWRQꢌ
IRUꢌꢀꢌVHFRQGVꢌWRꢌVZLWFKꢌWKHꢌ6FDQꢌ
3OD\ꢌ21ꢋ
After selecting the desired repeat play
range from those referred to in
“Repeat Play” on page 29, switch
Multi-CD Player Scan Play ON.
ꢀꢋ :KHQꢌ\RXꢌILQGꢌWKHꢌGHVLUHGꢌWUDFNꢌ
ꢍRUꢌGLVFꢎꢏꢌFDQFHOꢌWKHꢌ6FDQꢌ3OD\ꢌE\ꢌ
SUHVVLQJꢌWKHꢌ/2&$/ꢑ%60ꢌ
EXWWRQꢌIRUꢌꢀꢌVHFRQGVꢋ
,QGLFDWRU
“RPT” + “DISC”
Nothing
3OD\ꢌUDQJH
Disc Repeat
Multi-CD player Repeat
1RWHꢃ
•
•
Scan Play is canceled automatically after all the tracks or discs have been scanned.
One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON.
ꢀ Pause
Pause pauses the currently playing track.
ꢁ 6ZLWFKꢌWKHꢌ3DXVHꢌSOD\ꢌ21ꢑ2))ꢌ
ZLWKꢌWKHꢌ/2&$/ꢑ%60ꢌEXWWRQꢋ
ꢁꢊ
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Title
ꢀ Disc Title Input
You can input Titles up to 8 letters long for up to 100 discs. Using this function lets you easily
search for and select a desired disc for play.
ꢉꢋ 3OD\ꢌWKHꢌGLVFꢌ\RXꢌZLVKꢌWRꢌLQSXWꢌWKHꢌGLVFꢌWLWOHꢋ
ꢀꢋ 6HOHFWꢌWKHꢌ'LVFꢌ7LWOHꢌ,QSXWꢌPRGHꢌE\ꢌSUHVVLQJꢌWKHꢌ',63/$<ꢌEXWWRQꢌIRUꢌꢀꢌVHFRQGVꢋ
1RWHꢃ
•
When playing a CD TEXT disc on a CD TEXT compatible Multi-CD player, you cannot switch to
this mode.
•
A CD TEXT disc is a CD featuring recorded text information such as Disc Title.
ꢁꢋ 6HOHFWꢌOHWWHUVꢏꢌQXPEHUVꢌDQGꢌ
V\PEROVꢌZLWKꢌWKHꢌꢆꢃꢇꢌEXWWRQVꢋ
To insert a space, select the flashing
cursor “_”.
ꢂꢋ 0RYHꢌWKHꢌER[ꢌOHIWꢌDQGꢌULJKWꢌZLWKꢌ
WKHꢌꢂꢃꢄꢌEXWWRQVꢋ
ꢄꢋ :KHQꢌ\RXꢌKDYHꢌFRPSOHWHGꢌWLWOHꢌ
LQSXWꢏꢌPDNHꢌWKHꢌꢇWKꢌOHWWHUꢌIODVKꢏꢌ
WKHQꢌPHPRUL]HꢌE\ꢌSUHVVLQJꢌWKHꢌ
ꢄꢌEXWWRQꢋ
1RWHꢃ
•
•
•
Titles remain in memory, even after the disc has been removed from the magazine, and are recalled
when the disc is reinserted.
After the titles for 100 discs have been entered, data for a new disc will overwrite the data for the disc
that has not been played back for the longest time.
You can display the disc title of the disc currently playing. For details, refer to “Displaying Disc Title”
on page 32.
ꢁꢉ
Download from Www.Somanuals.com. All Manuals Search And Download.
8VLQJꢀ0XOWLꢁ&'ꢀ3OD\HUV
ꢀ Displaying Disc Title
You can display the currently playing Disc Title.
1RWHꢃ
•
You can also display the currently playing Disc Title when playing a CD TEXT disc on a CD TEXT
compatible Multi-CD player.
ꢁ 6ZLWFKꢌWKHꢌ'LVFꢌ7LWOHꢌ'LVSOD\ꢌZLWKꢌ
WKHꢌ',63/$<ꢌEXWWRQꢋ
Each press of the DISPLAY button
changes the display in the following
order:
Playback mode (Play Time) 3
Disc Title
1RWHꢃ
•
•
•
•
If you switch displays when disc titles have not been input, “NO TITLE” is displayed.
When playing a CD TEXT disc on a CD TEXT compatible Multi-CD Player:
You can use the Disc Title display function only.
You cannot scroll the display. Therefore you can only display the first 8 letters of the title even if the
title is more than 8 letters.
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs on a 50-Disc Type Multi-CD Player
When a magazine is loaded into a 50-Disc type Multi-CD Player, information on all the discs
in the magazine is read.
If you start playing a disc on a 50-Disc type Multi-CD Player before reading of information on
all discs has been completed, reading of information stops part way through.
1RWHꢃ
•
“LOAD” will be displayed in the following cases:
* If the disc in the extra tray is selected.
* If the disc is moved from the extra tray to the magazine.
(Refer to the 50-Disc type Multi-CD player owner’s manual.)
You cannot use the “Ejecting a Single Disc”, “Frequency Play”, “Music Group Play” or “ABC Disc
Title Search” functions with this product.
•
ꢅ
Disc Number Rough Search
This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the 1 to 5
buttons. The 50 discs are divided into five blocks, with each of the 1 to 5 buttons assigned to a
block.
ꢁ 6HOHFWꢌWKHꢌGHVLUHGꢌEORFNꢌZLWKꢌWKHꢌꢉꢌWRꢌꢄꢌEXWWRQVꢋ
1RWHꢃ
•
After completing a rough search, use the ꢆ and ꢇ buttons to select a desired disc.
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
$XGLRꢀ$GMXVWPHQW
Selecting the Equalizer Curve
You can switch between Equalizer curves.
ꢁ 0RYHꢌWKHꢌ(4ꢌEXWWRQꢌXSꢌRUꢌGRZQꢌWRꢌVHOHFWꢌWKHꢌGHVLUHGꢌ(TXDOL]HUꢌFXUYHꢋ
Equalizer curve
POWERFUL 4 NATURAL 4 VOCAL 4 CUSTOM 4 EQ FLAT 4 S-BASS
1RWHꢃ
•
“CUSTOM” stores an equalizer curve you have made adjustments to. (Refer to “Equalizer Curve
Adjustment” on page 36.)
Entering the Audio Menu
With this Menu, you can adjust the sound quality.
1RWHꢃ
•
After entering the Audio Menu, if you do not perform an operation within about 30 seconds, the
Audio Menu is automatically canceled.
ꢉꢋ 6HOHFWꢌWKHꢌGHVLUHGꢌPRGHꢌLQꢌWKHꢌ$XGLRꢌ0HQXꢋ
Each press changes the Mode ...
ꢀꢋ 2SHUDWHꢌDꢌPRGHꢋ
ꢁꢋ &DQFHOꢌWKHꢌ$XGLRꢌ0HQXꢋ
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Menu Functions
The Audio Menu features the following functions.
ꢀ Balance Adjustment (FAD)
This function allows you to select a Fader/Balance setting that provides ideal listening
conditions in all occupied seats.
ꢉꢋ 3UHVVꢌWKHꢌ$8',2ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ)DGHUꢑ%DODQFHꢌPRGHꢌꢍ)$'ꢎꢌLQꢌWKHꢌ$XGLRꢌ
0HQXꢋ
ꢀꢋ $GMXVWꢌIURQWꢑUHDUꢌVSHDNHUꢌ
EDODQFHꢌZLWKꢌWKHꢌꢆꢃꢇꢌEXWWRQVꢋ
“FAD F15” – “FAD R15” is displayed
as it moves from front to rear.
ꢁꢋ $GMXVWꢌOHIWꢑULJKWꢌVSHDNHUꢌEDODQFHꢌ
ZLWKꢌWKHꢌꢂꢃꢄꢌEXWWRQVꢋ
“BAL L9” – “BAL R9” is displayed as
it moves from left to right.
1RWHꢃ
•
“FAD 0” is the proper setting when 2 speakers are in use.
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
$XGLRꢀ$GMXVWPHQW
ꢀ Equalizer Curve Adjustment (EQ-L/M/H)
You can adjust the currently selected equalizer curve settings as desired. Adjusted equalizer
curve settings are memorized in “CUSTOM”.
ꢉꢋ 3UHVVꢌWKHꢌ$8',2ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ(TXDOL]HUꢌPRGHꢌꢍ(4ꢐ/ꢑ0ꢑ+ꢎꢌLQꢌWKHꢌ
$XGLRꢌ0HQXꢋ
ꢀꢋ 6HOHFWꢌWKHꢌEDQGꢌ\RXꢌZDQWꢌWRꢌ
DGMXVWꢌZLWKꢌWKHꢌꢂꢃꢄꢌEXWWRQVꢋ
EQ-L 4 EQ-M 4 EQ-H
ꢁꢋ %RRVWꢌRUꢌDWWHQXDWHꢌWKHꢌVHOHFWHGꢌ
EDQGꢌZLWKꢌWKHꢌꢆꢃꢇꢌEXWWRQVꢋ
The display shows “+6” – “- 6”.
“– (CUSTOM EQ)”
1RWHꢃ
•
If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve
will replace the previous adjusted curve. Then a new curve with “– (CUSTOM EQ)” appears on the
display while selecting the equalizer curve. (Refer to page 34.)
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ Loudness Adjustment (LOUD)
The Loudness function compensates for deficiencies in the low and high sound ranges at low
volume. You can select a desired Loudness level.
ꢉꢋ 3UHVVꢌWKHꢌ$8',2ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ/RXGQHVVꢌPRGHꢌꢍ/28'ꢎꢌLQꢌWKHꢌ$XGLRꢌ
0HQXꢋ
ꢀꢋ 6ZLWFKꢌWKHꢌ/RXGQHVVꢌIXQFWLRQꢌ
21ꢑ2))ꢌZLWKꢌWKHꢌꢆꢃꢇꢌEXWWRQVꢋ
“
LOUD”
ꢁꢋ 6HOHFWꢌWKHꢌGHVLUHGꢌOHYHOꢌZLWKꢌWKHꢌ
ꢂꢃꢄꢌEXWWRQVꢋ
LOW 3 MID 3 HI
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
$XGLRꢀ$GMXVWPHQW
ꢀ Front Image Enhancer Function (FIE)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by
cutting mid- and high-range frequency output from the rear speakers, limiting their output to
low-range frequencies. You can select the frequency you want to cut.
3UHFDXWLRQ
•
When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies,
not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden
increase in volume.
ꢉꢋ 3UHVVꢌWKHꢌ$8',2ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ)ꢋ,ꢋ(ꢋꢌPRGHꢌꢍ),(ꢎꢌLQꢌWKHꢌ$XGLRꢌ0HQXꢋ
ꢀꢋ 6ZLWFKꢌWKHꢌ)ꢋ,ꢋ(ꢋꢌIXQFWLRQ
21ꢑ2))ꢌZLWKꢌWKHꢌꢆꢃꢇꢌEXWWRQVꢋ
“FIE”
ꢁꢋ 6HOHFWꢌWKHꢌGHVLUHGꢌIUHTXHQF\ꢌZLWKꢌ
WKHꢌꢂꢃꢄꢌEXWWRQVꢋ
100 4 160 4250 (Hz)
1RWHꢃ
•
After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust
front and rear speaker volume levels until they are balanced.
•
Switch the F.I.E. function OFF when using a 2-speaker system.
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ Source Level Adjustment (SLA)
The SLA (Source Level Adjustment) function prevents radical leaps in volume level when
switching between sources. Settings are based on the FM volume level, which remains
unchanged. (Since the FM volume is the control, SLA is not possible in the FM modes.)
The MW/LW, cassette, CD, External Unit and AUX levels can all be adjusted.
ꢉꢋ &RPSDUHꢌWKHꢌ)0ꢌYROXPHꢌZLWKꢌWKHꢌYROXPHꢌRIꢌWKHꢌRWKHUꢌVRXUFHꢋꢌ
ꢍHꢋJꢋꢌ&DVVHWWHꢌSOD\HUꢋꢎ
ꢀꢋ 3UHVVꢌWKHꢌ$8',2ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ6/$ꢌPRGHꢌꢍ6/$ꢎꢌLQꢌWKHꢌ$XGLRꢌ0HQXꢋ
ꢁꢋ ,QFUHDVHꢌRUꢌGHFUHDVHꢌWKHꢌOHYHOꢌ
ZLWKꢌWKHꢌꢆꢃꢇꢌEXWWRQVꢋ
The display shows “+4” – “-4”.
ꢁꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
'HWDFKLQJꢀDQGꢀ5HSODFLQJꢀWKHꢀ)URQWꢀ3DQHO
Theft Protection
The front panel of the head unit is detachable to discourage theft.
ꢀ Detaching the Front Panel
ꢉꢋ (MHFWꢌWKHꢌIURQWꢌSDQHOꢋ
ꢀꢋ 7RꢌUHPRYHꢌWKHꢌIURQWꢌSDQHOꢏꢌSXOOꢌLWVꢌ
ULJKWꢐKDQGꢌVLGHꢌWRZDUGꢌ\RXꢋ
Take care not to grip it tightly or drop it.
ꢁꢋ 8VHꢌWKHꢌSURWHFWLYHꢌFDVHꢌSURYLGHGꢌWRꢌ
VWRUHꢑFDUU\ꢌWKHꢌGHWDFKHGꢌIURQWꢌSDQHOꢋ
ꢀ Replacing the Front Panel
ꢁ 5HSODFHꢌWKHꢌIURQWꢌSDQHOꢌE\ꢌFOLSSLQJꢌLWꢌ
LQWRꢌSODFHꢋ
3UHFDXWLRQꢃ
•
•
•
Never use force or grip the display tightly when removing or replacing the front panel.
Avoid subjecting the front panel to excessive shocks.
Keep the front panel out of direct sunlight and high temperatures.
ꢂꢊ
Download from Www.Somanuals.com. All Manuals Search And Download.
,QLWLDOꢀ6HWWLQJꢀ0HQX
Entering the Initial Setting Menu
With this menu, you can perform initial settings for this product.
ꢉꢋ 6ZLWFKꢌWKHꢌVRXUFHꢌ2))ꢋ
ꢀꢋ (QWHUꢌWKHꢌ,QLWLDOꢌ6HWWLQJꢌ0HQXꢋ
Hold for 2 seconds
ꢁꢋ 6HOHFWꢌDꢌGHVLUHGꢌPRGHꢋ
Each press changes the Mode...
ꢂꢋ 2SHUDWHꢌDꢌPRGHꢋꢌ
ꢄꢋ &DQFHOꢌWKHꢌ,QLWLDOꢌ6HWWLQJꢌ0HQXꢋ
1RWHꢃ
•
Holding down the AUDIO button for 2 seconds also cancels the Initial Setting Menu.
ꢂꢉ
Download from Www.Somanuals.com. All Manuals Search And Download.
,QLWLDOꢀ6HWWLQJꢀ0HQX
Initial Setting Menu Functions
ꢀ Changing the FM Tuning Step (FM)
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz
when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
ꢉꢋ 3UHVVꢌWKHꢌ$8',2ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ)0ꢌ7XQLQJꢌ6WHSꢌPRGHꢌꢍ)0ꢎꢌLQꢌWKHꢌ,QLWLDOꢌ
6HWWLQJꢌ0HQXꢋ
ꢀꢋ 6HOHFWꢌWKHꢌGHVLUHGꢌWXQLQJꢌVWHSꢌ
ZLWKꢌWKHꢌꢆꢃꢇꢌEXWWRQVꢋ
1RWHꢃ
•
•
The tuning step remains set at 50 kHz during Manual tuning.
The tuning step returns to 100 kHz if the battery is temporarily disconnected.
ꢀ Switching the Auto PI Seek (A-PI)
During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF.
(Refer to “PI Seek Function” on page 22.)
ꢉꢋ 3UHVVꢌWKHꢌ$8',2ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ$XWRꢌ3,ꢌ6HHNꢌPRGHꢌꢍ$ꢐ3,ꢎꢌLQꢌWKHꢌ,QLWLDOꢌ
6HWWLQJꢌ0HQXꢋ
ꢀꢋ 6ZLWFKꢌWKHꢌ$XWRꢌ3,ꢌ6HHNꢌ21ꢑ2))ꢌ
ZLWKꢌWKHꢌꢆꢃꢇꢌEXWWRQVꢋ
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ Switching the AUX Mode (AUX)
It is possible to use auxiliary (AUX) equipment with this product.
Activate the AUX mode when using external equipment with this product.
ꢉꢋ 3UHVVꢌWKHꢌ$8',2ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ$8;ꢌ6HWWLQJꢌPRGHꢌꢍ$8;ꢎꢌLQꢌWKHꢌ,QLWLDOꢌ
6HWWLQJꢌ0HQXꢋ
ꢀꢋ 6ZLWFKꢌWKHꢌ$8;ꢌ21ꢑ2))ꢌZLWKꢌ
WKHꢌꢆꢃꢇꢌEXWWRQVꢋ
ꢀ Selecting the Illumination Color (ILM)
KEH-P5900R is equipped with two illumination colors, green and red.
You can select the desired illumination color.
ꢉꢋ 3UHVVꢌWKHꢌ)81&7,21ꢌEXWWRQꢌDQGꢌVHOHFWꢌWKHꢌ,OOXPLQDWLRQꢌ&RORUꢌPRGHꢌ
ꢍ,/0ꢎꢌLQꢌWKHꢌ,QLWLDOꢌ6HWWLQJꢌ0HQXꢋ
ꢀꢋ 6HOHFWꢌWKHꢌGHVLUHGꢌLOOXPLQDWLRQꢌ
FRORUꢌZLWKꢌWKHꢌꢂꢃꢄꢌEXWWRQVꢋ
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
2WKHUꢀ)XQFWLRQV
Using the AUX Source
It is possible to use auxiliary (AUX) equipment with this product.
To listen to auxiliary equipment, switch the AUX mode in the Initial Setting Menu ON, and
then select the desired source.
ꢀ Selecting the AUX Source
ꢁ 6HOHFWꢌ$8;ꢋꢌꢍ5HIHUꢌWRꢌSDJHꢌꢉꢄꢋꢎ
Each press changes the Source ...
ꢀ AUX Title Input
The display title for AUX source can be changed.
ꢉꢋ 6HOHFWꢌWKHꢌ$X[ꢌ7LWOHꢌ,QSXWꢌPRGHꢌE\ꢌSUHVVLQJꢌWKHꢌ',63/$<ꢌEXWWRQꢌIRUꢌꢀꢌVHFRQGVꢋ
Hold for 2 seconds
ꢀꢋ ,QSXWꢌWKHꢌ$X[ꢌ7LWOHꢋ
Refer to “Disc Title Input” on page 31, and perform procedures 3 to 5 in the same way.
Cellular Telephone Muting
Sound from this system is muted automatically when a call is made or received using a cellular
telephone connected to this product.
• The sound is turned off, “MUTE” is displayed and no audio adjustment is possible.
Operation returns to normal when the phone connection is ended.
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
&DVVHWWHꢀ3OD\HUꢀDQGꢀ&DUH
Precaution
ꢀ About the Cassette Player
• A loose or warped label on a cassette tape may interfere with the eject mechanism of the unit
or cause the cassette to become jammed in the unit. Avoid using such tapes or remove such
labels from the cassette before attempting use.
• The music search and repeat functions may not work properly with the following kinds of
recorded tapes because the gap between songs cannot be found correctly.
* A tape with a gap of 4 seconds or less between songs.
* A tape containing dialog, etc., with pauses lasting for 4 seconds or longer.
* A tape with an extremely quiet passage in the music lasting for 4 seconds or longer.
ꢀ About Cassette Tapes
• Do not use tapes longer than C-90 type (90 min.) cassettes. Longer tapes can interfere with
tape transport.
• Storing cassettes in areas directly exposed to sunlight or high temperatures can distort them
and subsequently interfere with tape transport.
• Store unused tapes in a tape case where there is no danger of them becoming loose or being
exposed to dust.
Cleaning the Head
If the head becomes dirty, the sound quality will deteriorate and there will be sound dropouts
and other imperfections in performance. In this case, the head must be cleaned.
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
6SHFLILFDWLRQV
General
FM tuner
Power source .............. 14.4 V DC (10.8 – 15.1 V allowable) Frequency range ......................................... 87.5 – 108 MHz
Grounding system ........................................... Negative type Usable sensitivity
Max. current consumption ........................................... 8.5 A
Dimensions
..................... 11 dBf (1.0 µV/75 , mono, S/N: 30 dB)
50 dB quieting sensitivity ........ 16 dBf (1.7 µV/75 , mono)
(mounting size) ........ 178 (W) 50 (H) 155 (D) mm Signal-to-noise ratio ....................... 70 dB (IEC-A network)
(front face) ................. 188 (W) 58 (H) 20 (D) mm Distortion ............................ 0.3% (at 65 dBf, 1 kHz, stereo)
Weight ........................................................................ 1.2 kg Frequency response ........................ 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
Amplifier
MW tuner
Maximum power output ........................................ 40 W
Continuous power output ....................................... 22 W
4
4
Frequency range ......................................... 531 – 1,602 kHz
.............................................. (DIN45324, +B = 14.4 V) Usable sensitivity .................................. 18 µV (S/N: 20 dB)
Load impedance .............................. 4 (4 – 8 allowable) Selectivity .................................................... 50 dB (±9 kHz)
Preout maximum output level/output impedance
........................................................................ 2.2 V/1
LW tuner
Equalizer (3-Band Equalizer)
(Low) ................................................................ ±12 dB
Frequency range ............................................ 153 – 281 kHz
(Mid) ................................................................. ±12 dB
Usable sensitivity .................................. 30 µV (S/N: 20 dB)
(High) ............................................................... ±12 dB
Selectivity .................................................... 50 dB (±9 kHz)
Loudness contour
(Low) ..................... +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) .................... +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ................... +11 dB (100 Hz), +11 dB (10 kHz)
(volume: –30 dB)
Cassette player
Tape ........................... Compact cassette tape (C-30 – C-90)
Tape speed .......................................................... 4.8 cm/sec.
Fast forward/rewinding time ....... Approx. 100 sec. for C-60
Wow & flutter ............................................. 0.09% (WRMS)
1RWHꢃ
Frequency response ........................ 30 – 16,000 Hz (±3 dB)
Stereo separation ......................................................... 45 dB
Signal-to-noise ratio ....................... 61 dB (IEC-A network)
•
Specifications and the design are subject to possible
modification without notice due to improvements.
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
France: tapez 36 15 PIONEER
PIONEER ELECTRONIC CORPORATION
1-4-1 MEGURO, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1760, Long Beach, California 90801, U.S.A.
TEL: (800) 421-1404
PIONEER ELECTRONIC (EUROPE) N.V.
Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
TEL:(0) 3/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 580-9911
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: (905) 479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
San Lorenzo Num 1009 3er piso Desp. 302
Col. Del Valle, Mexico D.F. C.P. 03100
TEL: 5-688-52-90
Published by Pioneer Electronic
Corporation. Copyright © 1999 by Pioneer
Electronic Corporation. All rights reserved.
Printed in Belgium
MAN-KEH-P4959R-GB/B
<99H00F0P01>
Download from Www.Somanuals.com. All Manuals Search And Download.
|