DVD/CD Receiver
XV-DV440
XV-DV740
Speaker System
S-DV440
S-DV740
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
READ INSTRUCTIONS — All the safety and
operating instructions should be read before the
product is operated.
RETAIN INSTRUCTIONS — The safety and
operating instructions should be retained for
future reference.
HEED WARNINGS — All warnings on the product
and in the operating instructions should be
adhered to.
FOLLOW INSTRUCTIONS — All operating and use
instructions should be followed.
CLEANING — The product should be cleaned only
with a polishing cloth or a soft dry cloth. Never
clean with furniture wax, benzine, insecticides
or other volatile liquids since they may corrode
the cabinet.
ATTACHMENTS — Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
WATER AND MOISTURE — Do not use this
product near water — for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming
pool; and the like.
ACCESSORIES — Do not place this product on an
unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.
GROUNDING OR POLARIZATION
OBJECT AND LIQUID ENTRY — Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
SERVICING — Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
•
If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
•
If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding type plug.
DAMAGE REQUIRING SERVICE — Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
•
When the power-supply cord or plug is
damaged.
•
If liquid has been spilled, or objects have fallen
into the product.
POWER-CORD PROTECTION — Power-supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
OUTDOOR ANTENNA GROUNDING — If an
outside antenna or cable system is connected to
the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to
•
•
If the product has been exposed to rain or water.
If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
If the product has been dropped or damaged in
any way.
•
•
When the product exhibits a distinct change in
performance — this indicates a need for service.
REPLACEMENT PARTS — When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
SAFETY CHECK — Upon completion of any service
or repairs to this product, ask the service
technician to perform safety checks to
determine that the product is in proper
operating condition.
WALL OR CEILING MOUNTING — The product
should not be mounted to a wall or ceiling.
HEAT — The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
CART — A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product
and cart combination to overturn.
grounding electrodes, and requirements for the
grounding electrode. See Figure A.
LIGHTNING — For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
POWER LINES — An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power
lines or circuits. When installing an outside
antenna system, extreme care should be taken
to keep from touching such power lines or
circuits as contact with them might be fatal.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
VENTILATION — Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings should
never be blocked by placing the product on a
bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
manufacturer’s instructions have been adhered
to.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
POWER SOURCES — This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
LOCATION – The appliance should be installed in a
stable location.
GROUND CLAMPS
NONUSE PERIODS – The power cord of the
appliance should be unplugged from the outlet
when left un-used for a long period of time.
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Fig. A
NEC — NATIONAL ELECTRICAL CODE
D1-4-2-2_En
Download from Www.Somanuals.com. All Manuals Search And Download.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
D8-10-1-3_EF
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate
the equipment.
D8-10-2_En
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. D6-8-2-1_En
Energy-saving design
This product is for general household purposes.
Any failure due to use for other than household
purposes (such as long-term use for business
purposes in a restaurant or use in a car or ship)
and which requires repair will be charged for
This system is designed to use 0.5W of
electricity when power is switched to
standby.
even during the warranty period.
K041_En
For U.S. and Australia Model
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
C67-7-3_En
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your model
properly. After you have finished reading the instructions, put them in a safe place for future
reference.
Contents
Auto listening mode . . . . . . . . . . . . . . . . .24
Listening in surround sound . . . . . . . . . . .25
Dolby Pro Logic II Music settings . . . . . .25
Using the Advanced Surround effects . . . .26
Using Front Surround . . . . . . . . . . . . . . . .26
Adjusting the Advanced and
Front Surround effect level . . . . . . . . . . .27
Listening in stereo . . . . . . . . . . . . . . . . . . .27
Listening with headphones . . . . . . . . . . . .27
Enhancing dialogue. . . . . . . . . . . . . . . . . .28
Listening with a virtual surround back
01 Before you start
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Disc / content format playback
compatibility . . . . . . . . . . . . . . . . . . . . . . . 7
CD-R/RW compatibility . . . . . . . . . . . . . . 8
DVD-R/RW compatibility . . . . . . . . . . . . . 8
PC-created disc compatibility . . . . . . . . . 8
Compressed audio compatibility . . . . . . . 8
About WMA. . . . . . . . . . . . . . . . . . . . . . . 8
JPEG file compatibility . . . . . . . . . . . . . . . 8
speaker . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Using Quiet and Midnight listening
modes . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Adjusting the bass and treble . . . . . . . . . .29
Boosting the bass level . . . . . . . . . . . . . . .29
02 Controls and displays
Front panel. . . . . . . . . . . . . . . . . . . . . . . . . 9
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote control . . . . . . . . . . . . . . . . . . . . 11
03 Getting started
05 Playing discs
Switching on and setting up. . . . . . . . . . . 14
Setting the clock . . . . . . . . . . . . . . . . . . 15
Home theater sound setup. . . . . . . . . . . . 16
Using the Room Setup . . . . . . . . . . . . . . . 16
Setting up the remote to control your
Scanning discs . . . . . . . . . . . . . . . . . . . . .30
Playing in slow motion. . . . . . . . . . . . . . . .30
Frame advance/frame reverse . . . . . . . . . .30
Using the Disc Navigator to browse the
contents of a disc . . . . . . . . . . . . . . . . . . .31
Looping a section of a disc . . . . . . . . . . . .32
Using repeat play. . . . . . . . . . . . . . . . . . . .32
Using random play . . . . . . . . . . . . . . . . . .33
Creating a program list . . . . . . . . . . . . . . .34
Using the OSD . . . . . . . . . . . . . . . . . . . .34
Other functions available from the
TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the on-screen displays . . . . . . . . . . 17
Playing discs . . . . . . . . . . . . . . . . . . . . . . 18
Basic playback controls. . . . . . . . . . . . . 18
Resume and Last Memory . . . . . . . . . . . 19
DVD-Video disc menus . . . . . . . . . . . . . 20
Video CD/Super VCD PBC menus . . . . . 21
Listening to the radio . . . . . . . . . . . . . . . . 21
Improving poor FM reception. . . . . . . . . 22
Memorizing stations . . . . . . . . . . . . . . . 22
Listening to station presets . . . . . . . . . . 23
Listening to other sources . . . . . . . . . . . . 23
program menu . . . . . . . . . . . . . . . . . . . .34
Using the front panel display. . . . . . . . . .35
Clearing the program list. . . . . . . . . . . . .35
Searching a disc . . . . . . . . . . . . . . . . . . . .35
Switching subtitles . . . . . . . . . . . . . . . . . .36
Switching the DVD audio language . . . . . .36
Switching the Video CD/Super VCD
04 Listening to your system
About the listening modes . . . . . . . . . . . . 24
audio channel . . . . . . . . . . . . . . . . . . . . . .37
Zooming the screen. . . . . . . . . . . . . . . . . .37
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching camera angles . . . . . . . . . . . . .37
Displaying disc information . . . . . . . . . . . .37
OSD disc information . . . . . . . . . . . . . . .37
Front panel display information. . . . . . . .38
Using this unit with a Pioneer plasma
display. . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using the SR+ mode with a Pioneer
plasma display . . . . . . . . . . . . . . . . . . . . 56
06 Viewing JPEG discs
12 Additional information
Optional system settings. . . . . . . . . . . . . . 57
System Setup menu options in
Playing a JPEG slideshow . . . . . . . . . . . . .39
Using the JPEG Disc Navigator and Photo
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Zooming the screen. . . . . . . . . . . . . . . . . .40
standby. . . . . . . . . . . . . . . . . . . . . . . . . . 57
Resetting the system. . . . . . . . . . . . . . . . . 58
Using and taking care of discs . . . . . . . . . 58
Titles, chapters and tracks . . . . . . . . . . . 58
DVD Video regions . . . . . . . . . . . . . . . . . 58
Handling discs . . . . . . . . . . . . . . . . . . . . 59
Storing discs. . . . . . . . . . . . . . . . . . . . . . 59
Discs to avoid . . . . . . . . . . . . . . . . . . . . . 59
Proper installation and maintenance of
07 Using the timer
Setting the wake-up timer . . . . . . . . . . . . .41
Turning the wake-up timer on/off. . . . . . .41
Setting the sleep timer. . . . . . . . . . . . . . . .42
08 Surround sound and other
this system . . . . . . . . . . . . . . . . . . . . . . . . 60
Hints on installation . . . . . . . . . . . . . . . . 60
Cleaning the pickup lens . . . . . . . . . . . . 60
Problems with condensation . . . . . . . . . 60
Moving the system unit. . . . . . . . . . . . . . 60
Power cord caution. . . . . . . . . . . . . . . . . 61
Troubleshooting . . . . . . . . . . . . . . . . . . . . 62
General . . . . . . . . . . . . . . . . . . . . . . . . . . 62
DVD/CD/Video CD player . . . . . . . . . . . . 63
WMA/MP3/JPEG discs . . . . . . . . . . . . . . 64
Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Error Messages. . . . . . . . . . . . . . . . . . . . 65
Screen sizes and disc formats. . . . . . . . . . 66
Widescreen TV users . . . . . . . . . . . . . . . 66
Standard TV users. . . . . . . . . . . . . . . . . . 66
Selecting languages using the language
code list . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Language code list . . . . . . . . . . . . . . . . . . 67
Country code list . . . . . . . . . . . . . . . . . . . . 67
Preset code list . . . . . . . . . . . . . . . . . . . . . 68
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Specifications . . . . . . . . . . . . . . . . . . . . . . 70
Wall-mounting the front (S-DV440 only),
center and surround speaker system . . . 72
settings
Using the System Setup menu . . . . . . . . .43
Surround and sound setup options . . . . .43
SR+ control options for Pioneer plasma
displays . . . . . . . . . . . . . . . . . . . . . . . . . .44
Setting the channel levels . . . . . . . . . . . . .45
09 Video Adjust menu
Video Adjust . . . . . . . . . . . . . . . . . . . . . . .47
Creating your own presets. . . . . . . . . . . .47
10 Initial Settings menu
Using the Initial Settings menu . . . . . . . . .48
Video Output settings . . . . . . . . . . . . . . . .48
Language settings . . . . . . . . . . . . . . . . . . .49
Display settings . . . . . . . . . . . . . . . . . . . . .50
Options . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Parental Lock . . . . . . . . . . . . . . . . . . . . .50
11 Other connections
Connecting external antennas . . . . . . . . . .52
Connecting auxiliary components . . . . . . .52
Recording mode . . . . . . . . . . . . . . . . . . .53
Connecting using the S-video output . . . . .54
Connecting using the component video
output . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
About progressive scan video . . . . . . . . .54
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
CBhaepfteor 1re you start
Features
Disc / content format playback
compatibility
•
24-bit/96kHz compatible DAC
This player is compatible with a wide range of
disc types (media) and formats. Playable discs
will generally feature one of the following logos
on the disc and/or disc packaging. Note
however that some disc types, such as
recordable CD and DVD, may be in an
unplayable format—see below for further
compatibility information.
This system is fully compatible with high
sampling-rate discs, capable of delivering
exceptional sound quality in terms of dynamic
range, low-level resolution and high-frequency
detail.
•
Surround sound entertainment with
Dolby Digital and DTS software
The built-in Dolby Digital and DTS decoders let
you enjoy great surround sound with Dolby
Digital and DTS discs.
DVD-Video
DVD-R
DVD-RW
•
Pure Cinema progressive scan video
When connected to a progressive scan-
compatible TV or monitor using the
component video outputs, you can enjoy
extremely stable, flicker free images, with the
same frame refresh rate as the original movie.
Audio CD
Video CD
CD-R
CD-RW
•
Picture zoom
See Zooming the screen on page 37.
•
MP3 and WMA compatibility
Fujicolor CD
See Compressed audio compatibility on page 8.
•
is a trademark of Fuji Photo Film Co. Ltd.
•
JPEG compatibility
• Also compatible with KODAK Picture CD
See JPEG file compatibility on page 8.
This player supports the IEC’s Super VCD stan-
dard for superior picture quality, dual
soundtracks, and widescreen support.
•
Graphical on-screen displays
Setting up and using your DVD home theater
system is made very easy using the graphical
on-screen displays.
VIDEO
CD
•
Energy saving design
This system is designed to use 0.5 W of power
when in standby.
Super Video CD (Super VCD)
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before you start
• VBR WMA playback: No
CD-R/RW compatibility
• Compatible formats: CD-Audio, Video CD/
Super VCD, ISO 9660 CD-ROM* containing
MP3, WMA or JPEG files
* ISO 9660 Level 1 or 2 compliant. CD
physical format: Mode1, Mode2 XA Form1.
Romeo and Joliet file systems are both
compatible with this player.
• WMA lossless encoding compatible: No
• DRM (Digital Rights Management)
compatible: Yes (DRM-protected audio
files will not play in this player). See also
DRM in the Glossary on page 69.
• File extensions: .mp3, .wma (these must be
used for the player to recognize MP3 and
WMA files – do not use for other file types)
• Multi-session playback: No
• Unfinalized disc playback: Yes
• File structure: Up to 999 files per folder
DVD-R/RW compatibility
• Compatible formats: DVD-Video, Video
Recording (VR)*
About WMA
* Edit points may not play exactly as edited;
screen may go momentarily blank at edited
points.
®
The Windows Media logo printed on the box
• Unfinalized playback: No
indicates that this player can playback
Windows Media Audio content.
• WMA/MP3/JPEG file playback on DVD-R/
RW: No
WMA is an acronym for Windows Media Audio
and refers to an audio compression technology
developed by Microsoft Corporation. WMA
content can be encoded by using Windows
PC-created disc compatibility
Discs recorded using a personal computer
may not be playable in this unit due to the
setting of the application software used to
create the disc. In these particular instances,
check with the software publisher for more
detailed information.
®
®
Media Player version 7, 7.1, Windows Media
®
®
Player for Windows XP, or Windows Media
Player 9 Series.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
Discs recorded in packet write mode (UDF
format) are not compatible with this player.
Check the DVD-R/RW or CD-R/RW software
disc boxes for additional compatibility
information.
JPEG file compatibility
• Compatible formats: Baseline JPEG and
EXIF 2.1* still image files up to 8 mega-
pixels are supported (maximum vertical
and horizontal resolution is 5120 pixels).
*File format used by digital still cameras
Compressed audio compatibility
• Compatible formats: MPEG-1 Audio Layer 3
(MP3), Windows Media Audio (WMA)
• Sampling rates: 32, 44.1 or 48kHz
• File extensions: .jpg (must be used for the
player to recognize JPEG files – do not use
for other file types)
• Bit-rates: Any (128Kbps or higher
recommended)
• VBR (variable bit rate) MP3 playback: Yes
• File structure: Up to 999 files per folder
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
02
CChaoptnert2rols and displays
Front panel
1
2
3
4
5
6
7
0
OPEN/CLOSE
6
DVD/CD
7
FM/AM
–
DOWN VOL. UP
+
STANDBY/ON
PHONES
12
11
10
9
8
1
2
Operation indicator
10 Display
See Display on page 10 for detailed
information.
ꢀ OPEN/CLOSE
Press to open/close the disc tray.
11 Remote sensor
12 Disc tray
3
ꢁ DVD/CD
Press to switch to the DVD/CD function. Also
press to start/pause/resume playback.
4
ꢂ
Press to stop playback.
5
FM/AM
Press to switch to the tuner function, then to
toggle between the FM and AM bands.
6
VOLUME buttons
Use to adjust the volume.
7
ꢃ STANDBY/ON
Press to switch the system on or into standby.
8
PHONES jack
Headphone jack.
9
Timer indicator
Lights when the wake-up timer is set (page 41).
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Controls and displays
Display
3
5
1
2
4
6
7
8
9 10 11 12
13
MIDNIGHT QUIET
PGM RPT-1
RDM
ATT
REC MODE
PRO LOGIC
DIGITAL
ADV.SURR.
PRGSVE
kHz
MHz
19
18
17 16 15 14
1
Tuner indicators
8
ATT
Lights when the input attenuator is active for
the currently selected analog input (page 57).
Lights when a broadcast is being received.
9
REC MODE
Lights when the Rec Mode is on (page 53).
Lights when a stereo FM broadcast is being
received in auto stereo mode.
10 Timer indicators
Lights when the wake-up timer is set
(page 41).
Lights when FM mono reception is
selected.
2
ꢄ
Lights when the sleep timer is active
(page 42).
Lights when a disc is playing.
3
MIDNIGHT
11 2PRO LOGIC II
Lights during Dolby Pro Logic II decoding
(page 25).
Lights when the Midnight mode is selected
(page 28).
4
QUIET
12 2DIGITAL
Lights during playback of a Dolby Digital
source (page 25).
Lights when the Quiet mode is selected
(page 28).
5
PGM
Lights when a program list has been
programmed (page 34).
6
RPT and RPT-1
RPT lights during repeat play. RPT-1 lights
during repeat one-track play (page 32).
7
RDM
Lights during random play (page 33).
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
02
13 Speaker indicators
Remote control
These show which speakers are being used to
output the current source (they are not
placement diagrams). The illustrations below
show some example displays.
STANDBY/ON
1
2
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
FRONT
SURROUND
OPEN/CLOSE
5.1 channel surround sound
0
3
4
5
6
7
8
3
7
11
1
¡
4
4
12
13
Stereo (2.1 channel) sound
DVD MENU
RETURN
TUNE+
ST–
ST+
ENTER
3.1 channel sound with Dialogue
enhancement on the center
channel
TUNE–
MUTE
SOUND
8
9
14
MASTER
VOLUME
5.1 channel surround sound with
Virtual Surround Back mode active
TV CONTROL
10
CH
INPUT
VOL
BASS MODE DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
15
14 PRGSVE
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
Lights when progressive scan video output is
selected (page 48).
16
17
18
19
20
21
HOME
MENU
ZOOM
1
TOP MENU
2
3
15 ADV.SURR.
SYSTEM
SETUP
QUIET/
TEST TONE
5
MIDNIGHT
4
6
Lights when one of the Advanced or Front
Surround listening modes is selected
(page 26).
22
TIMER/
CLOCK
DIMMER
7
DISPLAY
8
9
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
16
ROOM SETUP
MAIN
SUB
Lights during playback of a DTS source
(page 25).
17 kHz / MHz
Important
Indicates the unit of the frequency shown in
the character display (kHz for AM, MHz for
FM).
• Functions printed in green on the remote
control are accessed by switching the
MAIN/SUB switch to SUB.
18 Character display
1
ꢃ STANDBY/ON
19
Press to switch the system on or into standby.
Lights during multi-angle scenes on a DVD
disc (page 37).
2
Function select buttons
Press to select the source you want to listen to
(DVD (CD). TUNER, TV, LINE)
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Controls and displays
3
FRONT SURROUND
ST +/–
Use to select a Front Surround listening mode
Use to select station presets when
(page 26).
listening to the radio.
4
Disc playback controls
8
9
MUTE
Press to mute all sound from the speakers
and headphones (press again to cancel).
ꢄ
Press to start or resume playback.
MASTER VOLUME
ꢅ and ꢆ/ꢇ
Use for reverse slow motion playback,
Use to adjust the volume.
frame reverse and reverse scanning.
10 TV CONTROL (page 17)
ꢈ and ꢉ/ꢊ
ꢃ
Use for forward slow motion playback,
frame advance and forward scanning.
Press to switch the TV on or into standby.
INPUT
ꢋ
Press to switch the TV input.
Press to pause playback; press again to
restart.
CH +/–
Use to select channels on the TV.
ꢂ
VOL +/–
Press to stop playback.
Use to adjust the volume on the TV.
5
ꢌ
11 ꢀ OPEN/CLOSE
Press to open/close the disc tray.
Press to jump to the beginning of the current
chapter/track, then to previous chapters/
tracks.
12 ꢍ
Press to jump to the next chapter/track.
6
DVD MENU
Press to display a DVD disc menu, or the Disc
Navigator if a VR format DVD-RW, CD, Video
CD/Super VCD, MP3, WMA or JPEG disc is
loaded.
13 RETURN
Press to return to a previous menu screen.
14 SOUND
Press to access the sound menu, from which
you can adjust the DSP effect level, bass and
treble, etc.
7
Cursor buttons, ENTER and tuning
buttons
Cursor buttons
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
navigate on-screen displays and menus.
15 Surround sound mode/sound
enhancement buttons
SURROUND
Use to select a Surround mode (page 25).
ENTER
Press to select an option or execute a
command.
ADVANCED
Use to select an Advanced Surround mode
(page 26).
TUNE +/–
Use to tune the radio.
VIRTUAL SB
Press to switch the Virtual Surround Back
speaker effect on/off (page 28).
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
02
BASS MODE
Use to select a Bass Mode (page 29).
TEST TONE
Use to output the test tone (for speaker
setup) (page 45).
DIALOGUE
Use to select a Dialogue mode (page 28).
QUIET/MIDNIGHT
Use to select the Quiet and Midnight
modes (page 28).
CH LEVEL
Use to adjust the speaker level (page 45).
19 DIMMER
16 DVD/CD buttons
Press to switch between normal and
dimmed front panel display.
AUDIO
Press to select an audio channel or
language (page 36).
DISPLAY
Press to display/change disc information
shown on-screen (page 37).
SUBTITLE
Press to display/change the DVD subtitle
display (page 36).
TIMER/CLOCK
Press to display the clock and to access the
timer menu (page 15 and page 41).
ANGLE
Press to change camera angle during DVD
multi-angle scene playback (page 37).
20 SR+
Press to switch the SR+ mode on/off
(page 56).
PROGRAM
Use to program/play a program list
(page 34–35).
FOLDER –
Press to jump to previous folders.
REPEAT
FOLDER +
Press to jump to the next folder.
Use to select a repeat play mode (page 32).
RANDOM
Use to select a random play mode
(page 33).
CLR
Press to clear an entry.
ENTER
17 ZOOM
Selects menu options, etc. (works exactly
the same as the ENTER button in 7 above).
Press to change the screen zoom level
(page 37).
21 MAIN/SUB
TOP MENU
Change from MAIN to SUB to access the
functions/commands printed in green on the
remote.
Use to display the top menu of a DVD disc
in the play position (this may be the same
as pressing DVD MENU).
ROOM SETUP
Press to start Room Setup (page 16).
HOME MENU
Press to display (or exit) the on-screen
menu for Initial Settings, Play Mode
functions, etc.
22 Number buttons
Use the number buttons for selecting
chapters/tracks from a disc directly.
18 SYSTEM SETUP
Use to make various system and surround
sound settings (page 43).
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
Chapter 3
Getting started
You should see the welcome screen displayed.
Switching on and setting up
After making sure everything is connected up
properly, you’re ready to switch on. The first
thing to do is to tell the system what kind of TV
you’re using, standard or widescreen.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
After that you can set up the surround sound
for your room, and set the clock so that you can
use the timer features.
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
Next
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
2
Press ENTER to move on to the next
FRONT
SURROUND
OPEN CLOSE
screen.
0
8
3
7
3
Use the ꢂ/ꢃ(cursor left/right) buttons
1
¡
to select either ‘Wide screen (16:9)’ or
‘Standard size screen (4:3)’ according to the
kind of TV you have, then press ENTER.
See also Screen sizes and disc formats on
page 66 if you’re not sure which one to choose.
4
4
DVD MENU
RETURN
TUNE+
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
Let's Get Started Menu
MASTER
VOLUME
TV CONTROL
What kind of TV do you have?
Use the
/
cursor buttons
CH
INPUT
VOL
to choose, then press [ENTER]
1
Press ꢃSTANDBY/ON (on the remote or
Wide screen (16:9)
Standard size screen (4:3)
the front panel) to switch the system on.
Also make sure that your TV is switched on and
that the video input is set to this system (for
example, if you connected this system to the
VIDEO 1 input on your TV, switch your TV to
VIDEO 1).
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
4
Press ENTER again to finish setting up.
Setting the clock
Setting the clock allows you to use the timer
features.
Let's Get Started Menu
BASS MODE DIALOGUE CLEVEL
H
DVD MENU
RETURN
SURROUND SAUDRVRAONUCNEDD VAIDRVTUANALCESDB
Setup complete
If you're finished setting up,
choose [Complete],
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
ENTER
to start again choose [Back]
HOME
MENU
ZOOM
1
TOP MENU
2
MUTE
SOUND
3
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
TIMER/
MASTER
VOLUME
Complete
Back
DIMMER
7
DISPLAY
8
CLOCK
9
TV CONTROL
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ROOM SETUP
MAIN
SUB
CH
INPUT
VOL
• Use the ꢃ (cursor right) button to select
Back then press ENTER if you want to go
back and change the setting you just
made.
1
2
Press TIMER/CLOCK.
• If you are adjusting the clock, rather then
setting it for the first time, press TIMER/
CLOCK again.
Tip
If ‘Clock ADJ?’ isn’t already showing in
the display, press ꢂ or ꢃ (cursor left or
• You can also use the function buttons
(DVD/CD, TUNER, etc.) or the ꢀ OPEN/
CLOSE button to switch the system on
from standby.
right) until you see it.
3
Press ENTER.
4
Use the ꢀ/ꢁ (cursor up/down) buttons
to set the hour.
5
Press ENTER.
6
Use the ꢀ/ꢁ (cursor up/down) buttons
to set the minute.
7
Press ENTER to confirm.
The display flashes to indicate the clock is set.
Tip
• Press TIMER/CLOCK anytime to display
the clock.
Note
• If you unplug the system from the wall
outlet, or there is a power outage, you will
need to set the clock again.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
For a more detailed surround sound setup, see
Using the System Setup menu on page 43.
Home theater sound setup
Depending on the size and characteristics of
your room, you can choose to place your
speakers in one of two ways using this system:
1
If the system isn’t already on, press
ꢃ STANDBY/ON to switch it on.
• Standard surround 5-spot setup – This is
a standard multichannel surround sound
speaker setup for optimal 5.1 channel
home theatre sound.
2
Press ROOM SETUP.
• If you have previously set up the room type
and seating position, the display will show
the current room settings.
Center
Front left
Front right
3
4
Press ENTER.
Subwoofer
Use the ꢀ/ꢁ (cursor up/down) buttons
to select a room type then press ENTER.
Choose one of the following depending on your
room size:
Listening position
Surround
left
Surround
right
• S – Smaller than average room
• M – Average room
• Front surround 3-spot setup – This setup
is ideal when rear surround speaker
placement isn't possible or you want to
avoid running long speaker cables in your
listening area. Use this setup together with
the Front Surround modes to take
• L – Larger than average room
5
Use the ꢀ/ꢁ (cursor up/down) buttons
to select a seating position setting, then
press ENTER.
Choose one of the following depending on
where your main listening position is:
advantage of wall and ceiling reflections
for a very realistic surround effect.
• Fwd – If you are nearer to the front
speakers than the surround speakers
Center
Front
left
Front
right
• Mid – If you are equal distance from the
front and surround speakers
Subwoofer
Surround
right
Surround
left
• Back – If you are nearer to the surround
speakers than the front speakers
Listening position
Note
See About the listening modes on page 24 for
more on using the different listening modes
with each speaker setup.
• The Room Setup automatically sets up
both channel level and channel delay. If
you have already set the channel levels
manually (see Setting the channel levels on
page 45), you will see Room Set? in the
display when you first press the ROOM
SETUP button.
Using the Room Setup
After you have set up your speakers to your
liking (see Home theater sound setup above),
make sure you calibrate your system for
surround sound. This is a quick and easy way
to get good surround sound for your room.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
Setting up the remote to
control your TV
Note
• The default setting is for a Pioneer TV.
You can set up the supplied remote to control
your TV using the TV CONTROL buttons.
Using the on-screen displays
1
Switch on your TV.
For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you’ll need to use them when setting up the
system, using some of the playback features,
such as program play, and when making more
advanced settings for audio and video.
2
Find the name of the manufacturer of
your TV in the Preset code list on page 68.
Next to each manufacturer is one or more
three digit codes. These tell the remote what
kind of TV you have.
If the name of the manufacturer of your TV
does not appear in the table, you won’t be able
to set up this remote to control your TV.
All the screens are navigated in basically the
same way, using the cursor buttons (ꢀ, ꢁ, ꢂ,
ꢃ) to change the highlighted item and
pressing ENTER to select it.
3
Point the remote at your TV, hold down
the CLR button, then enter the three digit
code for your TV.
The remote transmits an on/off signal to the TV.
If you’ve entered the correct code, your TV
should switch off.
Important
• Throughout this manual, ‘Select’ means
use the cursor buttons to highlight an item
on-screen, then press ENTER.
If your TV doesn’t turn off, repeat the procedure
using the next code in the list until your TV
switches off successfully. Once set, you can
use the individual TV controls shown below.
BASS MODE DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
1
3
7
¡
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
4
4
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
MASTER
VOLUME
DVD MENU
RETURN
3
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
TV CONTROL
4
6
TIMER/
ENTER
DIMMER
7
DISPLAY
8
CLOCK
CH
INPUT
VOL
9
MUTE
SOUND
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
BASS MODE DIALOGUE
CH LEVEL
ROOM SETUP
MAIN
SUB
SURROUND ADVANCED VIRTUAL SB
MASTER
VOLUME
Button
What it does
Switches your TV on or into
standby.
ꢃ
Button
What it does
Displays/exits the on-screen
display
HOME
MENU
CH +/–
VOL +/–
INPUT
Changes the TV channel.
Adjusts the volume.
ꢂꢀꢁꢃ
Changes the highlighted menu
item
Switches the TV’s input
between the built in TV tuner
and an external video source.
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
4
Press ꢄ (play) to start playback.
Button
What it does
If you’re playing a DVD or Video CD/Super VCD,
a menu may appear. See DVD-Video disc
menus on page 20 and Video CD/Super VCD
PBC menus on page 21 for how to navigate
these.
Selects the highlighted menu
item (both ENTER buttons work
in exactly the same way)
ENTER
Returns to the main menu
without saving changes
RETURN
If you’re playing an WMA/MP3 disc, it may take
a few seconds before playback starts,
depending on the complexity of the file
structure on the disc.
Tip
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Viewing JPEG
discs on page 39 for more on playing these
discs.
• The button guide at the bottom of every
OSD screen shows you which buttons
you’ll need to use for that screen.
• See also Options on page 50 if the disc
contains both WMA/MP3 audio files and
JPEG picture files.
Playing discs
The basic playback controls for playing DVD,
CD, Video CD/Super VCD and WMA/MP3 discs
are covered here. Further functions are
detailed in chapter 5.
5
Use the MASTER VOLUME – / + button
(or the front panel VOLUME buttons) to
adjust the volume.
1
If the player isn’t already on, press
ꢃ STANDBY/ON to switch it on.
Basic playback controls
If you’re playing a DVD or Video CD/Super VCD,
also turn on your TV and make sure that it is set
to the correct video input.
The following table shows the basic controls on
the remote for playing discs. You can find other
playback features in the chapter 5.
2
Press ꢀ OPEN/CLOSE to open the disc
FRONT
tray.
BASS MODE DIALOGUE
CH LEVEL
SURROUND
OPEN CLOSE
SURROUND ADVANCED VIRTUAL SB
0
8
3
7
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
3
Load a disc.
1
4
¡
HOME
MENU
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you’re
loading a double-sided DVD disc, load it with
the side you want to play face down).
ZOOM
1
TOP MENU
2
4
3
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
DVD MENU
RETURN
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
9
TUNE+
ST–
ST+
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ENTER
ROOM SETUP
MAIN
SUB
TUNE–
MUTE
SOUND
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
Button
What it does
Button
What it does
ꢄ
Starts playback.
Numbers
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD/Super VCD/WMA/
MP3) after a few seconds (or
after pressing ENTER).
• If the disc is playing, playback
jumps to the start of the selected
chapter or track after a few
seconds (or after pressing
ENTER).
DVD and Video CD: If the display
shows Resume or Last Mem
playback starts from the resume
or last memory point (see also
Resume and Last Memory
below.)
ꢋ
ꢂ
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback.
DVD and Video CD: The display
shows Resume. Press ꢂ again if
you want to cancel the resume
function. (See also Resume and
Last Memory below.)
Note
• You may find with some DVD discs that
some playback controls don’t work in
certain parts of the disc. This is not a
malfunction.
• Track skip and number buttons for track
selection do not work with unfinalized CD-
R/RW discs.
ꢅ
ꢈ
ꢌ
ꢍ
Press to start fast reverse
scanning. Press ꢄ (play) to
resume normal playback.
Press to start fast forward
scanning. Press ꢄ (play) to
resume normal playback.
Using the front panel controls
Skips to the start of the current
track or chapter, then to previous
tracks/chapters.
The ꢀ OPEN/CLOSE, ꢁ DVD/CD, FM/AM
and ꢂ(stop) buttons work the same way as the
remote control equivalents.
Skips to the next track or
chapter.
Resume and Last Memory
When you stop playback of a DVD or Video CD
disc, Resume shows in the display indicating
that you can resume playback from that point.
If the disc tray is not opened, the next time you
start playback the display shows Resume and
playback resumes from the resume point.
For DVD discs only: If you take the disc out of
the player, the play position is stored in
memory. When you load the disc next time, the
display shows Last Mem and you can resume
playback (this works for up to five discs).
If you want to clear the resume/last memory
point, press ꢂ (stop) while Resume or Last
Mem is displayed.
FOLDER +/– Skips to the next/previous folder
when playing an WMA/MP3 disc.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and bottom of
the screen. This is not a malfunction.
Note
• When a Video CD is loaded, the Resume
point is lost if the system is switched off, or
switched to a function other than DVD
(CD).
• I have a standard (4:3) TV and set the system
to show widescreen DVDs in pan & scan
format, so why do I still get black bars top
and bottom with some discs?
• For the Last Memory function to work, you
must press ꢂ (stop) to stop playback
before opening the disc tray.
Some discs override the display
preferences of the system, so even if you
have 4:3 (Pan & Scan) selected, those
discs will still be shown in letterbox format.
This is not a malfunction.
• The Last Memory function doesn’t work
with VR format DVD-RW discs.
FAQ
• After I load a DVD disc, it ejects
automatically after a few seconds!
DVD-Video disc menus
Many DVD-Video discs contain menus from
which you can select what you want to watch.
They may give access to additional features,
such as subtitle and audio language selection,
or special features such as slideshows. See the
disc packaging for details.
Most likely, the disc is the wrong region for
your system. The region number should be
printed on the disc; check it against the
region number of the system (which you
can find on the rear panel). See also DVD
Video regions on page 58.
Sometimes DVD-Video menus are displayed
automatically when you start playback; others
only appear when you press DVD MENU or
TOP MENU.
If the region number is OK, it may be that
the disc is damaged or dirty. Clean the disc
and look for signs of damage. See also
Using and taking care of discs on page 58.
CH LEVEL
BASS MODE DIALOGUE
SURROUND ADVANCED
VIRTUAL SB
• Why won’t the disc I loaded play?
1
3
7
¡
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
First check that you loaded the disc the
right way up (label side up), and that it’s
clean and not damaged. See Using and
taking care of discs on page 58 for
information on cleaning discs.
4
4
HOME
MENU
ZOOM
1
TOP MENU
2
3
DVD MENU
RETURN
SYSTEM
QUIET/
TEST TONE
5
SETUP
MIDNIGHT
4
6
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
ENTER
9
MUTE
SOUND
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
If a disc loaded correctly won’t play, it’s
probably an incompatible format or disc
type, such as DVD-Audio or DVD-ROM. See
Disc / content format playback compatibility
on page 7 for more on disc compatibility.
ROOM SETUP
MAIN
SUB
MASTER
VOLUME
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
Button
What it does
Button
What it does
Displays the ‘top menu’ of a DVD
disc—this varies with the disc.
Displays the PBC menu.
TOP MENU
RETURN
Numbers
Selects a numbered menu
option.
Displays a DVD disc menu—this
varies with the disc and may be
the same as the ‘top menu’.
DVD
MENU
ꢌ
Displays the previous menu page
(if there is one).
ꢂꢀꢁꢃ
Moves the cursor around the
screen.
ꢍ
Displays the next menu page (if
there is one).
Selects the current menu option.
ENTER
Press to select highlighted menu
option.
ENTER
Returns to the previously
displayed menu screen.
RETURN
Numbers
Highlights a numbered menu
option (some discs only). Press
ENTER to select.
Listening to the radio
The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don’t have to manually
tune in every time you want to listen.
Video CD/Super VCD PBC menus
Some Video CD/Super VCDs have menus from
which you can choose what you want to watch.
These are called PBC (Playback control)
menus.
MASTER
VOLUME
STANDBY/ON
TV CONTROL
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
CH
INPUT
VOL
FRONT
SURROUND
OPEN CLOSE
You can play a PBC Video CD/Super VCD
without having to navigate the PBC menu by
pressing ꢂ (stop) then starting playback using
a number button to select a track, rather than
ꢄ (play) (or ꢁ on the front panel).
0
8
3
7
BASS MODE DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
1
¡
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
4
4
HOME
MENU
ZOOM
1
TOP MENU
2
DVD MENU
RETURN
3
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
TUNE+
4
6
BASS MODE DIALOGUE
CH LEVEL
FRONT
ST–
ST+
SURROUND ADVANCED VIRTUAL SB
OPEN CLOSE
TIMER/
SURROUND
DIMMER
7
DISPLAY
8
CLOCK
ENTER
0
8
3
7
9
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
TUNE–
MUTE
SOUND
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
1
4
¡
HOME
MENU
ZOOM
1
TOP MENU
2
ROOM SETUP
MAIN
SUB
3
4
MASTER
VOLUME
SYSTEM
QUIET/
TEST TONE
5
SETUP
MIDNIGHT
4
6
TIMER/
DVD MENU
RETURN
DIMMER
7
DISPLAY
8
CLOCK
9
1
If the system isn’t already on, press
ꢃ STANDBY/ON to switch on.
TUNE+
FOLDER–
0
FOLDER+
ENTER
SR+
CLR
ST–
ST+
ENTER
ROOM SETUP
MAIN
SUB
TUNE–
MUTE
SOUND
2
Press TUNER to switch to the tuner,
then press repeatedly to select the AM or
FM band.
The display shows the tuner band and
frequency.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
• If you’re using the front panel controls, the
TUNER button switches between FM, AM
and station presets (see Memorizing
stations below).
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
3
Tune to a frequency.
There are three tuning modes—manual, auto,
MASTER
VOLUME
STANDBY/ON
and high-speed:
TV CONTROL
CD
FM/AM
TUNER
L1/L2
LINE
• Auto tuning: Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to search for other
stations.
DVD
TV
CH
INPUT
VOL
FRONT
SURROUND
OPEN CLOSE
0
8
3
7
BASS MODE DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
1
¡
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
4
4
HOME
MENU
• Manual tuning: Press TUNE +/–
repeatedly to change the displayed
frequency.
ZOOM
1
TOP MENU
2
3
DVD MENU
RETURN
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
TUNE+
4
6
ST–
ST+
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
ENTER
9
• High-speed tuning: Press and hold TUNE
+/– until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
TUNE–
MUTE
SOUND
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ROOM SETUP
MAIN
SUB
MASTER
VOLUME
1
Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
2
Press SYSTEM SETUP.
3
Use the ꢂ/ꢃ(cursor left/right) buttons
to choose ‘St. Memory?’ then press ENTER.
1
2
3
Tune to an FM radio station.
Press SYSTEM SETUP.
4
Use the ꢀ/ꢁ (cursor up/down) buttons
to select the station preset you want.
There are 30 preset locations; each can store
one station preset.
Use the ꢂ/ꢃ(cursor left/right) buttons
to choose ‘FM Mode?’ then press ENTER.
4
Use the ꢀ/ꢁ (cursor up/down) buttons
5
Press ENTER to save the station preset.
to select ‘FM Mono’ then press ENTER.
The mono indicator ( ) lights when the tuner
is in mono reception mode.
Note
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
Select Auto above to switch back to auto-
stereo mode (the stereo indicator ( ) lights
when receiving a stereo broadcast).
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
Listening to station presets
1
Make sure the TUNER function is
selected.
2
Use the ST +/– buttons to select a
station preset.
Listening to other sources
You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Connecting auxiliary components on page 52.
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
FRONT
SURROUND
OPEN CLOSE
0
8
3
7
1
¡
4
4
1
If the system isn’t already on, press ꢃ
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Select the source you want to listen to.
• If you’re using the remote control, press TV
to select the TV IN input, or use the LINE
(L1/L2) button to select the LINE 1 or LINE
2 input.
3
If necessary, start playback of the
external source.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Listening to your system
Chapter 4
Listening to your system
About the listening modes
Auto listening mode
As explained in Home theater sound setup on
page 16, there are two basic surround speaker
setup options available. Of course you can
select any of the listening modes regardless of
how you place your speakers, but you will
achieve the best surround effect by using the
listening modes in conjunction with your
speaker setup:
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
BDIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
• Standard surround 5-spot setup – Use
the Standard (Listening in surround sound
on page 25) and Advanced (Using the
Advanced Surround effects on page 26)
surround listening modes with this setup.
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
9
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ROOM SETUP
MAIN
SUB
• Front surround 3-spot setup – See Using
Front Surround on page 26 for the options
available with this speaker setup.
•
Press SURROUND to select the ‘Auto’
listening mode.
Make sure you have completed Using the
Room Setup on page 16. For a more detailed
surround sound setup, see Using the System
Setup menu on page 43.
If the source is Dolby Digital or DTS, the
2DIGITAL or DTS indicator on the front panel
lights.
Note
Note
• Any previously active Dolby Pro Logic or
Advanced Surround mode is canceled
when Auto listening mode is selected.
• Certain features explained in this section
may not be possible depending on the
source (for example, 88.2 / 96 kHz sources),
or a conflicting system setting. See Error
Messages on page 65 for more on this.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to your system
04
Listening in surround sound
Note
You can listen to any source—stereo or
multichannel, analog or digital—in surround
sound. Surround sound is generated from
stereo sources using one of the Dolby Pro
Logic decoding modes.
• When listening in Dolby Digital / DTS
mode, two-channel material will
automatically be played in surround sound
using Dolby Pro Logic II decoding.
• Dolby Digital / DTS sources that use only
the center channel cannot be played back
in surround sound.
DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
QUIET/
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three further parameters you
can adjust: Center Width, Dimension, and
Panorama.
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
9
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ROOM SETUP
MAIN
SUB
1
With Dolby Pro Logic II Music mode
active, press SOUND.
•
Press SURROUND repeatedly to select a
listening mode (or press SURROUND then
use the ꢀ/ꢁ (cursor up/down) buttons).
The listening mode choices that appear in the
display will vary according to the type of source
that’s playing.
2
Use the ꢂ/ꢃ(cursor left/right) buttons
to select ‘C Width’, ‘Dimen.’ or ‘Pnrm.’
• C Width (Center Width): Makes the center
channel wider (higher settings) or
narrower (lower settings)
• Auto – Auto listening mode (see above)
• Dimen. (Dimension): Makes the sound
more distant (minus settings), or more
forward (positive settings)
• Dolby Digital / DTS – Dolby Digital or DTS
decoding (depending on the source). For a
multichannel source, this will be the same
as Auto.
• Pnrm. (Panorama): Creates more spacious
surround sound
• Pro Logic – 4.1 channel surround sound
for use with any two-channel source
3
Use the ꢀ/ꢁ (cursor up/down) buttons
to adjust the setting.
• PL II Movie – Pro Logic II 5.1 channel
surround sound, especially suited to movie
sources, for use with any two-channel
source
Center Width is adjustable between 0 and 7;
Dimension between –3 and +3. Panorama is
On or Off.
4
Press ENTER to confirm.
• PL II Music – Pro Logic II 5.1 channel
surround sound, especially suited to music
sources, for use with any two-channel
source (see also Dolby Pro Logic II Music
settings below)
• Stereo – See Listening in stereo below
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Listening to your system
Using the Advanced Surround
effects
Using Front Surround
The Front Surround modes are effective when
you are using the Front surround 3-spot
speaker setup as described in Home theater
sound setup on page 16. The surround
speakers should be placed on top of the front
speakers and oriented either towards the walls,
or straight ahead, depending on which mode
you are using (see below).
The Advanced Surround effects can be used
with any multichannel or stereo source for a
variety of additional surround sound
effects.The 5-spot setup described in Home
theater sound setup on page 16 should be used
with these effects.
For more options, see Adjusting the Advanced
and Front Surround effect level below.
For more options, see Adjusting the Advanced
and Front Surround effect level below.
BASS MODE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
STANDBY/ON
HOME
MENU
ZOOM
1
TOP MENU
2
3
CD
FM/AM
TUNER
L1/L2
LINE
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
DVD
TV
4
6
FRONT
TIMER/
SURROUND
OPEN CLOSE
DIMMER
7
DISPLAY
8
CLOCK
9
0
8
3
7
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
1
¡
ROOM SETUP
MAIN
SUB
4
4
•
Press ADVANCED to select an Advanced
•
Press FRONT SURROUND to select an
Surround mode (or press ADVANCED then
use the ꢀ/ꢁ buttons).
Press repeatedly to select from:
Front Surround mode (or press FRONT
SURROUND then use the ꢀ/ꢁ buttons).
Press repeatedly to select from:
• Adv. Movie – Gives a movie theater-type
sound
• Frt. Movie – The Front Surround Movie
mode emphasizes directionality, giving you
a realistic movie theater-type sound.
• Adv. Music – Gives a concert hall-type
sound
• Frt. Music – The Front Surround Music
mode provides greater breadth and depth
to music sources, enveloping you with a
concert hall-type sound.
• Expanded – Creates an extra wide
surround field
• TV Surr. – Designed for mono or stereo TV
• ExtraPower – The Extra Power mode gives
additional energy and depth to a stereo
source by using the surround speakers in
addition to the front speakers.
broadcasts and other sources
• Sports – Designed for sports and other
programs based on commentary
• Game – Creates surround sound from
video game sources
• 5ch Stereo – Designed to give powerful
surround sound to stereo music sources
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to your system
04
If you have selected Frt. Movie or Frt. Music,
you will achieve best results by turning each
surround speaker about 50º towards the
closest wall. With ExtraPower, orient the
surround speakers in the same direction as the
front speakers (towards the listening position).
Listening in stereo
You can listen to any source—stereo or
multichannel, analog or digital—in stereo.
When playing a multichannel source, stereo
sound is created by downmixing all channels
to the front left/right speakers and the
subwoofer.
DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
ꢄ
HOME
MENU
ZOOM
1
TOP MENU
2
3
50º
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
9
Frt. Movie / Frt. Music
Extra Power
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ROOM SETUP
MAIN
SUB
• When turning, you will feel the surround
speaker snap correctly into place. Do not
force the speaker to turn past this point.
•
Press SURROUND repeatedly until
‘Stereo’ shows in the display.
Any active Advanced or Front Surround mode
is canceled.
Adjusting the Advanced and Front
Surround effect level
You can emphasize or reduce the effect of the
Advanced and Front Surround modes as you
like. You can set the effect level for all modes
independently.
Listening with headphones
When headphones are connected, only the
Stereo (default) and Phones Surround (virtual
surround sound for headphones) modes are
available.
1
With one of the Advanced or Front
Surround modes active, press SOUND.
When you disconnect them it reverts to the
previous mode.
2
Use the ꢂ/ꢃ(cursor left/right) buttons
to select ‘Effect’.
•
With headphones connected, press
3
Use the ꢀ/ꢁ (cursor up/down) buttons
ADVANCED or FRONT SURROUND to select
‘Phones Surround’ or SURROUND to select
‘Stereo’.
to adjust the effect level.
The effect level can be adjusted from 10 (min)
to 90 (max).
4
Press ENTER to confirm.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Listening to your system
surround back channel. In a real theater the
surround back speaker would be directly
behind you, creating more cohesive and
realistic surround sound.
Enhancing dialogue
• Default setting: Dialog Off
The Dialogue Enhancement feature is
designed to make the dialog stand out from
other background sounds in a TV or movie
soundtrack.
BASS MODE DIALOGUE
SURROUND ADVANCED
V
IRTUALSB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
BASS MODE DIALOGUE
CH LEVEL
ZOOM
1
TOP MENU
2
SURROUND OVIRTUAL SB
3
QUIET/
SYSTEM
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
MIDNIGHT
TEST TONE
5
SETUP
SUBTITLE
4
6
TIMER/
HOME
MENU
DIMMER
7
DISPLAY
8
CLOCK
ZOOM
1
TOP MENU
2
9
3
QUIET/
SYSTEM
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
MIDNIGHT
TEST TONE
5
SETUP
4
6
TIMER/
ROOM SETUP
MAIN
SUB
DIMMER
7
DISPLAY
8
CLOCK
9
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ROOM SETUP
MAIN
SUB
•
Press VIRTUAL SB repeatedly to switch
between ‘Vir. SB On’ and ‘Vir. SB Off’.
•
Press DIALOGUE to select the amount
dialog enhancement.
Note
Press repeatedly to select from:
• You can’t use Virtual Surround Back when
using the Stereo listening mode (or Auto
with stereo sources).
• Dialog Off – No dialog enhancement
• Dialog Mid – Moderate dialog
enhancement
• If you are using the The Front surround 3-
spot setup (see Home theater sound setup
on page 16), switch the Virtual Surround
Back feature off.
• Dialog Max – Strong dialog enhancement
Listening with a virtual
• If there is no surround channel, Virtual
Surround Back has no effect.
surround back speaker
• Default setting: Vir. SB Off
The Virtual Surround Back feature can be used
when listening in surround sound (using the 5-
spot setup described in Home theater sound
setup on page 16) to simulate an added
Using Quiet and Midnight
listening modes
• Default setting: Off
The Quiet listening feature reduces excessive
bass or treble in a sound source. You can use
this feature if the music is a little bit harsh and
you would like a smoother sound.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to your system
04
The Midnight listening feature allows you to
hear effective surround sound of movies at low
volume levels. The effect automatically adjusts
according to the volume at which you’re
listening.
4
Press ENTER to confirm.
Boosting the bass level
There are three bass modes you can use to
enhance the bass in a source.
BASS MODE DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
BASS MODE DIALOGUE
CH LEVEL
ADVANCED VIRTUAL SB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
HOME
MENU
3
ZOOM
1
TOP MENU
2
QUIET/
SYSTEM
MIDNIGHT
3
TEST TONE
5
SETUP
QUIET/
SYSTEM
4
6
MIDNIGHT
TEST TONE
5
SETUP
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
4
6
TIMER/
9
DIMMER
7
DISPLAY
8
CLOCK
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
9
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ROOM SETUP
MAIN
SUB
ROOM SETUP
MAIN
SUB
•
Press QUIET/MIDNIGHT repeatedly to
•
Press BASS MODE repeatedly to choose
switch between ‘Quiet’, ‘Midnight’ and
‘Off’.
an option that fits the source you’re
listening to.
• Music – Can be used with music to give a
deeper bass sound
Adjusting the bass and treble
Use the bass and treble controls to adjust the
overall tone. Bass and treble adjustment is not
possible when the Quiet or Midnight modes
are active.
• Cinema – Good for action movies or
movies with lots of sound effects
• P. Bass – Can be used with music sources
to bring the beat of the music (or
soundtrack) to the forefront
DVD MENU
RETURN
TUNE+
• Off – Switch off the bass boost if it causes
excessive bass (i.e. it sounds ‘boomy) in
the source
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
MASTER
VOLUME
1
2
Press SOUND.
Use the ꢂ/ꢃ(cursor left/right) buttons
to select ‘Bass’ or ‘Treble’.
3
Use the ꢀ/ꢁ (cursor up/down) buttons
to adjust the sound.
The bass and treble can be adjusted from –3 to
+3.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
CPhlaapteyr i5ng discs
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached on a DVD disc.
Note
• Some DVDs restrict the use of some
functions (random or repeat, for example)
in some or all parts of the disc. This is not a
malfunction.
Playing in slow motion
You can play DVDs and Video CD/Super VCDs
at four different forward slow motion speeds.
DVD discs can also be played at two reverse
speeds.
• When playing Video CD/Super VCDs, some
of the functions are not available during
PBC playback. If you want to use them,
start the disc playing using a number
button to select a track.
1
During playback, press ꢋ (pause).
• Many features are not available when
using unfinalized CD-R/RW discs.
2
Press and hold ꢆ/ꢇ or ꢉ/ꢊ until
slow motion playback starts.
• The slow motion speed is shown on-
screen.
Remember
• There is no sound during slow motion
playback.
• To access functions printed in green on the
remote, move the slider switch from MAIN
to SUB.
3
Press repeatedly to change the slow
motion speed.
4
To resume normal playback, press ꢄ
Scanning discs
(play).
You can fast-scan discs forward or backward at
various different speeds.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
1
During playback, press ꢅ or ꢈ to
start scanning.
• There is no sound while scanning DVDs
and Video CD/Super VCDs, and no
subtitles while scanning DVDs.
Frame advance/frame reverse
You can advance or back up DVD discs frame-
by-frame. With Video CD/Super VCDs you can
only use frame advance.
2
Press repeatedly to increase the
scanning speed.
• The scanning speed is shown on-screen.
3
To resume playback, press ꢄ (play).
• When scanning a Video CD/Super VCD or
a WMA/MP3 track, playback automatically
resumes at the end or beginning of the
track.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
1
2
During playback, press ꢋ (pause).
• It’s not possible to switch between Orig-
inal and Playlist during playback.
Press ꢆ/ꢇ or ꢉ/ꢊ to reverse or
• Not all VR format DVD-RW discs have a
Playlist.
advance a frame at a time.
3
To resume normal playback, press ꢄ
(play).
Disc Navigator
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
Title(1-03)
DVD-RW
Original
01. 3/31 FIRST LEAGUE
02. 4/28 SECOND LEAGUE
03. 4/29 FINAL ROUND
Play List
Using the Disc Navigator to
browse the contents of a disc
The screen for CDs and Video CD/Super VCDs
shows a list of tracks.
Use the Disc Navigator to browse through the
contents of a disc to find the part you want to
play. You can use the Disc Navigator when a
disc is playing or stopped (a disc must be
loaded).
Disc Navigator
Track 1-10
CD
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
1
Press HOME MENU and select ‘Disc
Navigator’ from the on-screen display.
Disc Navigator
The screen for an WMA/MP3 disc shows the
folder names on the left and the track names
on the right (note that if there are more than 16
folders or names that contain accented or non-
roman characters, tracks and folders may
show up with generic names – F_033, T_035,
etc.).
• With most discs, you can also press DVD
MENU to go directly to the Disc Navigator.
2
Select what you want to play.
Depending on the type of disc you have loaded,
the Disc Navigator looks slightly different.
The screen for DVD discs shows the titles on
the left and the chapters on the right. Select a
title, or a chapter within a title.
Select a folder, or a track within a folder.
Disc Navigator
Folder 1-17
Track 1-10
Disc Navigator
Title 1-10
Chapter 1-3
WMA/MP3
001. ACP
002. Nth Degree
003. Pfeuti
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
DVD
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
004. Live
005. Glitch music
006. CodHead
007.Thermo
008. Missing Man
007. Outernational
008. Vacuum tube
Playback starts after you press ENTER.
For a VR (Video Recording) mode DVD-RW disc
select between the Playlist and Original areas
of the disc, or a title. Press ꢃ (cursor right) to
preview the title.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
Using repeat play
Tip
There are various repeat play options,
• Another way to find a particular place on a
disc is to use one of the search modes. See
Searching a disc on page 35.
depending on the kind of disc loaded. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating a program list on
page 34). However, note that you can’t use
repeat and random play at the same time.
Looping a section of a disc
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD and
Video CD) or title (DVD) that form a loop which
is played over and over.
1
During playback, press HOME MENU
and select ‘Play Mode’.
2
Select ‘Repeat’ from the list of functions
• You can’t use A-B Repeat with Super VCD
or WMA/MP3 discs.
on the left.
Play Mode
1
During playback, press HOME MENU
and select ‘Play Mode’.
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Repeat Off
Random
2
Select ‘A-B Repeat’ from the list of
Program
functions on the left.
Search Mode
Play Mode
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
3
Select a repeat play option.
If program play is active, select Program
Repeat to repeat the program list, or Repeat
Off to cancel.
Random
Program
Search Mode
• For DVD discs, select Title Repeat or
Chapter Repeat (or Repeat Off).
3
Press ENTER on ‘A(Start Point)’ to set
the loop start point.
Play Mode
4
Press ENTER on ‘B(End Point)’ to set the
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Repeat Off
loop end point.
After pressing ENTER, playback jumps back to
the start point and plays the loop.
Random
Program
Search Mode
• The minimum loop time is 2 seconds.
5
To resume normal playback, select ‘Off’
• For CDs and Video CD/Super VCDs, select
Disc Repeat or Track Repeat (or Repeat
Off).
from the menu.
• For WMA/MP3 discs, select Disc Repeat,
Folder Repeat or Track Repeat (or
Repeat Off).
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
3
Select a random play option.
• For DVD discs, select Random Title or
Tip
Random Chapter, (or Random Off).
• You can also use the REPEAT button on the
remote to select a repeat play option. The
repeat mode is indicated in the front panel
display and on-screen. The repeat modes
available are the same as when choosing
from the Play Mode menu.
Play Mode
A-B Repeat
Repeat
Random Title
Random Chapter
Random Off
Random
Program
Search Mode
• If you’ve created a program list, Program
Repeat is also available.
• During playback, you can cancel repeat
play by pressing CLR.
• For CDs and Video CD/Super VCDs, select
On or Off to switch random play on or off.
• For WMA/MP3 discs, select Random All
(all folders) or Random Track (current
folder only), (or Random Off).
Using random play
Use this function to play titles or chapters
(DVD-Video) or tracks (CD, Video CD/Super
VCD and WMA/MP3 discs) in a random order.
Tip
You can set the random play option when a
disc is playing or stopped. However, you can't
use random play together with program or
repeat play.
• Use the following controls during random
play:
Button
What it does
• You can’t use random play with VR format
DVD-RW discs, or while a DVD disc menu
is being displayed.
ꢂ
Stop and cancel random play.
ꢍ
Selects another track/chapter at
random from those remaining.
1
During playback, press HOME MENU
and select ‘Play Mode’.
ꢌ
Returns to the beginning of the
current track/chapter. You can't
go back further than this.
2
Select ‘Random’ from the list of
functions on the left.
Play Mode
• You can also use the RANDOM button on
the remote to select a random play mode.
The random mode is indicated in the front
panel display and on-screen. The random
modes available are the same as when
choosing from the Play Mode menu.
Press ENTER to start random play.
A-B Repeat
Repeat
Random Title
Random Chapter
Random Off
Random
Program
Search Mode
• To cancel random playback without stop-
ping playback, press CLR. The disc will play
to the end, then stop.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
After pressing ENTER to select the title/
chapter/folder/track, the step number
automatically moves down one.
Creating a program list
This feature lets you program the play order of
titles/chapters/folders/tracks on a disc.
5
Repeat step 4 to build up a program list.
• You can’t use Program play with VR format
DVD-RW discs, or while a DVD disc menu
is being displayed.
A program list can contain up to 24 titles/chap-
ters/folders/tracks.
• You can insert steps into the middle of a
program list by just highlighting the
position where you want the new step to
appear and entering a title/chapter/folder/
track number.
Using the OSD
1
During playback, press HOME MENU
and select ‘Play Mode’.
• To delete a step, highlight it and press CLR.
2
Select ‘Program’ from the list of
functions on the left.
6
To play the program list, press ꢄ (play).
Program play remains active until you turn off
program play (see below), erase the program
list (see below), eject the disc or switch off the
player.
Play Mode
A-B Repeat
Repeat
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
Random
Program
Search Mode
ꢄ Off
Tip
• Use the following controls during program
play:
3
Select ‘Create/Edit’ from the list of
program options.
Button
What it does
4
Use the cursor buttons and ENTER to
HOME
MENU
Save the program list and exit
the program edit screen without
starting playback.
select a title, chapter, folder or track for the
current step in the program list.
For a DVD disc, you can add a title or a chapter
to the program list.
ꢍ
Skip to the next step in the
program list.
Program
Program Step
Title 1~38
Chapter 1~4
CLR
Switch off program play. Press
while stopped to erase the
program list.
01. 01
02.
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
03.
04.
05.
RETURN
Exit the program edit screen
without saving any changes.
06.
07.
08.
Other functions available from the
program menu
• For a CD or Video CD/Super VCD, select a
track to add to the program list.
There are a number of other options in the
program menu in addition to Create/Edit.
• For an WMA/MP3 disc, you can add a
whole folder, or a track within a folder to
the program list.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
• Playback Start – Starts playback of a
saved program list
4
To play the program list, press ꢄ (play).
Program play remains active until you press ꢂ
(stop), clear the playlist (see below), eject the
disc or switch off the player.
• Playback Stop – Turns off program play,
but does not erase the program list
• Program Delete – Erases the program list
and turns off program play
Clearing the program list
You must clear the program list to program a
new one.
• Program Memory (DVD only) – Select On
to save the program list for the disc loaded.
(Select Off to cancel the program memory
for the disc loaded)
1
2
If a disc is playing, press ꢂ (stop).
Press CLR.
Using the front panel display
Even though the OSD is available for CDs and
WMA/MP3 discs, the front panel display
provides enough information to make a
program list easily. If a disc is playing, stop it
first.
Note
• Program lists are saved for the DVD disc
loaded. When you load a disc with a saved
program list, program play is automatically
turned on.
1
Press PROGRAM.
• You can save program lists for up to 24
discs. After that, the oldest one is replaced
with the new one saved.
You’re prompted to enter a track or folder for
the first step in the program list.
P - 0 0
0 0 0
Searching a disc
You can search DVD discs by title or chapter
number, or by time. CD/Super VCDs can be
searched by track number, and Video CDs by
track number or time. WMA/MP3 discs can be
searched by folder or track number.
2
Use ꢀ/ꢁ (cursor up/down) to select a
track or a folder, then press ENTER.
• For WMA/MP3 discs only: To select an
individual track within a folder, use the ꢀ/
ꢁ (cursor up/down) buttons to select the
folder, then press ꢃ, then use ꢀ/ꢁ
(cursor up/down) to select a track. Press
ENTER.
P - 0 1
5 3 7
Wait for the display to prompt you after
completing each selection. If you make a
mistake, press CLR to delete the last (most
recently) programmed track.
3
Repeat step 2 to build up a program list.
A program list can contain up to 24 steps.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
1
Press HOME MENU and select ‘Play
Switching subtitles
Mode’.
Some DVD discs have subtitles in one or more
languages; the disc box will usually tell you
which subtitle languages are available. You
can switch subtitle language during playback.
2
Select ‘Search Mode’ from the list of
functions on the left.
The search options that appear depend on the
kind of disc loaded. The screen below shows
the DVD search options.
•
Press SUBTITLE repeatedly to select a
subtitle option.
Play Mode
Current / Total
1/2
Subtitle
English
A-B Repeat
Repeat
Title Search
Chapter Search
Time Search
Random
Program
Note
Search Mode
• Some discs only allow you to change
subtitle language from the disc menu.
Press TOP MENU to access.
3
4
Select a search mode.
• The disc must be playing in order to use
time search.
• To set subtitle preferences, see Language
settings on page 49.
Use the number buttons to enter a title,
Switching the DVD audio
language
chapter, folder or track number, or a time.
Play Mode
When playing a DVD disc recorded with dialog
in two or more languages, you can switch
audio language during playback.
A-B Repeat
Repeat
Title Search
Input Chapter
Chapter Search
Time Search
0
0
1
Random
Program
•
Press AUDIO repeatedly to select an
Search Mode
audio language option.
Current /Total
1/2
Audio
French
Dolby Digital 3/2.1CH
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD) or track (Video CD) you
want playback to resume from. For
example, press 4, 5, 0, 0 to have playback
start from 45 minutes into the disc. For 1
hour, 20 minutes and 30 seconds, press 8,
0, 3, 0.
Note
• Some discs only allow you to change audio
language from the disc menu. Press TOP
MENU to access.
• To set audio language preferences, see
Language settings on page 49.
5
Press ENTER to start playback.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
Switching the Video CD/Super
VCD audio channel
Switching camera angles
Some DVD discs feature scenes shot from two
or more angles—check the disc box for details.
When playing a Video CD/Super VCD, you can
switch between stereo, just the left channel or
just the right channel.
When a multi-angle scene is playing, a
icon appears on screen to let you know that
other angles are available (this can be
switched off if you prefer—see Display settings
on page 50).
Some Super VCDs have two soundtracks. With
these discs you can switch between the two
soundtracks as well as individual channels in
each.
•
During playback (or when paused),
press ANGLE to switch angle.
•
Press AUDIO repeatedly to select an
audio channel option.
Displaying disc information
Audio
Stereo
OSD disc information
Various track, chapter and title information
can be displayed on-screen while a disc is
playing.
Zooming the screen
Using the zoom feature you can magnify a part
of the screen by a factor of 2 or 4, while
watching a DVD or Video CD/Super VCD or
playing a JPEG disc.
•
To show/switch/hide the information
displayed, press DISPLAY repeatedly.
• When a disc is playing, the information
appears at the top of the screen.
1
During playback, use the ZOOM button
to select the zoom factor (Normal, 2x or
4x).
• Since DVD, Video CD/Super VCD and JPEG
pictures have a fixed resolution, picture
quality will deteriorate, especially at 4x
zoom. This is not a malfunction.
2
Use the cursor buttons to change the
zoomed area.
You can change the zoom factor and the
zoomed area freely during playback.
• If the navigation square at the top of the
screen disappears, press ZOOM again to
display it.
Note
• If you are displaying subtitles, these will
disappear when the screen is zoomed.
They will reappear when you return the
screen to normal.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
Front panel display information
Limited disc information also appears in the
front panel display. Press DISPLAY to change
the displayed information.
• DVD / DVD-RW displays
Title no.
2
2
8 4 9
Chapter no.
Elapsed title time
Title no.
Remaining title time
1 TTL 1 0 7 0 0
0 4 2
Title no.
2
2
Chapter no.
Remaining chapter
time
• CD and Video CD/Super VCD displays
Track no.
4
1 1 6
Elapsed track time
Track no.
Remaining track time
(CD / Video CD only)
4
3 2 0
Remaining disc time
(CD / Video CD only)
Disc
5 3 1 5
• WMA / MP3 disc displays
Track no.
2
0 3 5
Elapsed track time
Track name
E V E R Y B OD
B E S T _O F _
Folder name
• JPEG disc displays
File name
T I G E R_ 0 1
Folder name
Z OO _ T R I P
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing JPEG discs
06
Chapter 6
Viewing JPEG discs
Playing a JPEG slideshow
Note
After loading a CD/CD-R/RW containing JPEG
• The ꢋ, ANGLE and ZOOM buttons do not
work while the display shows LOADING.
pictures, press ꢄ to start a slideshow from the
first folder/picture on the disc. The player
displays the pictures in each folder in alphabet-
ical order.
• The time it takes for the player to load a file
increases with large file sizes.
Pictures are automatically adjusted so that
they fill as much of the screen as possible (if
the aspect ratio of the picture is different to
your TV screen you may notice black bars at the
sides, or at the top and bottom of the screen).
• Up to 999 files are viewable on a disc. If
there are more files than this on a disc, only
the first 999 files are viewable.
• If you want to play the WMA/MP3 tracks on
a disc that also contains JPEG picture files,
you should first set the Photoviewer
option to Off. See Options on page 50.
While the slideshow is running:
Button
What it does
ꢋ
Pauses the slideshow; press
again to restart.
Using the JPEG Disc Navigator
and Photo Browser
ꢌ
Displays the previous picture.
Displays the next picture.
Use the JPEG Disc Navigator to find a
particular folder or picture by filename on the
disc in the play position; use the Photo
Browser to find a picture within a folder by
thumbnail image.
ꢍ
ANGLE
Pauses the slideshow and
rotates the currently displayed
picture 90º clockwise. Press ꢄ
(play) to restart slideshow.
1
Press DVD MENU to display the Disc
Navigator screen.
ZOOM
Pauses the slideshow and zooms
the screen (see below). Press ꢄ
(play) to restart slideshow.
Disc Navigator
Folder 1-2
File 1-40
001. FL000001
002. FL000002
003. FL000003
004. FL000004
005. FL000005
006. FL000006
007. FL000007
008. FL000008
JPEG
001. F_001
002. F_002
Displays the Disc Navigator
screen (see below).
DVD
MENU
Skips to the next/previous folder
when playing a JPEG disc.
FOLDER +/
FOLDER –
The left column shows the folders on the disc,
the right column shows the files in a folder.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Viewing JPEG discs
2
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
Zooming the screen
navigate.
Using the zoom feature you can magnify a part
of the screen by a factor of 2 or 4, while viewing
pictures from a JPEG disc.
When a file is highlighted, a thumbnail image
is displayed.
• When a folder is highlighted you can press
ENTER to open the Photo Browser screen
for that folder. See below for more on using
the Photo Browser.
1
During slideshow playback, use the
ZOOM button to select the zoom factor.
• Normal
• 2x
• 4x
3
To resume the slideshow from the
highlighted file, press ENTER.
Normal
Using the Photo Browser
The Photo Browser displays nine thumbnail
images at a time from the current folder.
1
From the Disc Navigator screen,
highlight a folder to display then press
ENTER.
Zoom 2x
Zoom 4x
The Photo Browser screen opens with the first
nine pictures displayed as thumbnails.
Photo Browser
2 / 40 Live at Soft
• The slideshow is paused when the screen
is zoomed.
2
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
• Since JPEG pictures have a fixed
resolution, picture quality may deteriorate,
especially at 4x zoom. This is not a
malfunction.
highlight a thumbnail picture.
• Use the track skip buttons (ꢌand ꢍ) to
see the previous / next page of thumbnails.
Keep the button pressed if you want to skip
several pages; release when you reach the
page you want.
2
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
change the zoomed area.
You can change the zoom factor and the
zoomed area freely.
• To return to the Disc Navigator screen,
press RETURN.
3
Press ENTER to display the selected
3
To resume the slideshow, press ꢄ
thumbnail full size on screen.
The slideshow resumes from the selected
picture.
(play).
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timer
07
Chapter 7
Using the timer
3
4
Set the volume.
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
Press TIMER/CLOCK twice to reach the
timer menu.
5
Use the ꢂ/ꢃ(cursor left/right) buttons
to select ‘Wake-Up?’ then press ENTER.
Important
6
Use the ꢂ/ꢃ(cursor left/right) buttons
• The clock must be set to the correct time
for the wake-up timer to work properly (see
Setting the clock on page 15).
to select ‘TimerEdit’ then press ENTER.
7
Set the switch-on time.
Use the ꢀ/ꢁ (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you’re
done.
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
TV CONTROL
INPUT
DVD
TV
FRONT
CH
VOL
SURROUND
OPEN CLOSE
8
Set the switch-off time.
0
8
3
7
Use the ꢀ/ꢁ (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you’re
done.
BASS MODE DIALOGUE
CH LEVEL
1
¡
SURROUND ADVANCED VIRTUAL SB
4
4
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
DVD MENU
RETURN
ZOOM
1
TOP MENU
2
3
QUIET/
SYSTEM
TUNE+
After pressing ENTER this last time, the wake-
up indicator lights, and the switch-on, switch-
off times, the function (DVD/CD, etc.) and
volume are confirmed in the display.
MIDNIGHT
TEST TONE
5
SETUP
ST–
ST+
4
6
ENTER
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
TUNE–
9
MUTE
SOUND
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ROOM SETUP
MAIN
SUB
MASTER
VOLUME
9
Switch the system into standby mode.
TV CONTROL
The wake-up timer will not work if the system is
left on!
1
Select the source you want played.
For example, press TUNER (FM/AM on the
front panel) to select the radio as your source.
Tip
2
Prepare the source.
• You can check the timer settings in
standby by pressing TIMER/CLOCK twice.
(Press TIMER/CLOCK once to display the
current time.)
For example, tune in the radio station you want
to wake up to.
Turning the wake-up timer on/off
If the wake-up timer is on, it will switch on the
system everyday at the time you have set.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Using the timer
1
Press TIMER/CLOCK twice to reach the
1
Press TIMER/CLOCK twice to reach the
timer menu.
timer menu.
2
Use the ꢀ/ꢁ(cursor left/right) buttons
2
Use the ꢀ/ꢁ(cursor left/right) buttons
to select ‘Wake-Up?’ then press ENTER.
to select ‘Sleep?’ then press ENTER.
3
Use the ꢀ/ꢁ(cursor left/right) buttons
3
Use the ꢂ/ꢃ (cursor up/down) buttons
to select ‘Timer On?’ or ‘Timer Off?’.
• You must have the timer set (see above) to
select ON. The wake-up timer switches on
and off according to your previous settings.
to select a switch-off time then press
ENTER.
Choose between the following options:
• Sleep Auto – System switches off
automatically after the currently playing
CD, Video CD or WMA/MP3 disc has
finished.
4
Press ENTER.
Note
• Sleep 90 – System switches off after 90
minutes
• The wake-up timer will automatically be
canceled if the clock is reset.
• Sleep 60 – System switches off after an
hour
• Sleep 30 – System switches off after 30
minutes
Setting the sleep timer
The sleep timer switches off the system after a
specified time so you can fall asleep without
worrying about it.
• Sleep Off – cancels the sleep timer
4
To check how much time is left, repeat
steps 1 and 2.
The remaining time is displayed momentarily.
Important
• The front panel display dims when the
sleep timer is active.
• If you set the sleep timer while the wake-up
timer is active, the earlier switch off time
takes priority.
Note
FRONT
BASS MODE DIALOGUE
CH LEVEL
SURROUND
OPEN CLOSE
SURROUND ADVANCED VIRTUAL SB
0
8
3
7
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
• Sleep Auto will not work with Video CDs
during PBC playback or CDs in repeat play.
SUBTITLE
1
4
¡
HOME
MENU
ZOOM
1
TOP MENU
2
3
4
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
DVD MENU
RETURN
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
9
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
ENTER
ROOM SETUP
MAIN
SUB
MUTE
SOUND
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround sound and other settings
08
Chapter 8
Surround sound and other settings
• You can't change the Surround and sound
setup options with the Recording Mode
(page 53) switched on.
Using the System Setup menu
All the available settings in the setup menu are
listed in Surround and sound setup options and
SR+ control options for Pioneer plasma displays
below. See the notes in each section for
additional information about the settings.
Follow the steps below to customize the
settings in the System Setup menu.
FRONT
Surround and sound setup options
The Room Setup feature (page 16) is designed
to give you a basic surround sound setup,
however you can make more detailed settings
that may improve the surround sound in your
listening room. Note that the first setting in
each section is the default.
SURROUND
OPEN CLOSE
BASS MODE DIALOGUE
CH LEVEL
0
8
3
7
SURROUND ADVANCED VIRTUAL SB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
1
4
¡
SUBTITLE
4
HOME
MENU
ZOOM
1
TOP MENU
2
Front speakers distance setting
Specifies the distance from your listening
position to the front speakers:
3
DVD MENU
RETURN
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
ENTER
9
• Front 1 ft ~ Front 30 ft – Distance can be
set in increments of 1 ft. The default is 10 ft.
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
MUTE
SOUND
ROOM SETUP
MAIN
SUB
MASTER
VOLUME
Center speaker distance setting
Specifies the distance from your listening
position to the center speaker:
1
2
Press SYSTEM SETUP.
Use the ꢂ/ꢃ(cursor left/right) buttons
• Center 1 ft ~ Center 30 ft – Distance can
be set in increments of 1 ft. The default is
10 ft.
to choose the setting you want to adjust.
The current setting is shown for each option as
you cycle through the display. See below for a
full list and description of each.
Surround speakers distance setting
Specifies the distance from your listening
position to the surround speakers:
3
Use the ꢀ/ꢁ (cursor up/down) buttons
to adjust the setting.
4
Repeat steps 2 and 3 to make other
• Surr. 1 ft ~ Surr. 30 ft – Distance can be
set in increments of 1 ft. The default is 10 ft.
settings.
5
When you’re done, press ENTER to
leave the System Setup menu.
Note
• The System Setup menu is exited
automatically after 5 minutes of inactivity.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Surround sound and other settings
Dynamic Range Control
Specifies the amount of dynamic range
adjustment to Dolby Digital or DTS
soundtracks:
LFE attenuator setting
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator as
needed to prevent the ultra-low bass from
distorting the sound.
• DRC Off – No dynamic range adjustment
(use when listening at higher volume)
• LFE ATT 0 – The LFE channel is played with
no attenuation
• DRC Mid – Mid setting
• LFE ATT 10 – LFE channel is attenuated by
10dB
• DRC High – Dynamic range is reduced
(loud sounds are reduced in volume while
quieter sounds are increased)
• LFE OFF – LFE channel is not played
SR+ control options for Pioneer
Note
plasma displays
• This setting works only with Dolby Digital
and some DTS soundtracks. For other
sources, you can create a similar effect
using the Midnight mode (see Using Quiet
and Midnight listening modes on page 28).
You only need to make the following settings if
you have connected a Pioneer plasma display
to this unit using an SR+ cable (not supplied).
Note that in the function settings below, the
number of video inputs may change depending
on your display. See also Using this unit with a
Pioneer plasma display on page 55.
Dual mono setting
Specifies how dual mono encoded Dolby
Digital or DTS soundtracks should be played.
You can also use this setting to switch the
audio channel on DVD-RW discs recorded with
two separate soundtracks.
Control mode setting
• SR+ Off – Switches SR+ off (this unit and
the plasma display work independently)
• L-Ch1 R-Ch2 – Both channels are played
through the front speakers
• SR+ On – Switches SR+ on (this unit
sends control signals to the plasma
display)
• Ch1 Mono – Only channel 1 is played
The following settings are only available if the
Control mode setting (above) is switched on.
• Ch2 Mono – Only channel 2 is played
Note
Volume control setting
• On the Ch1 Mono and Ch2 Mono settings
the sound comes only from the center
speaker (or from the front speakers if
listening in STEREO mode).
• Vol C.Off – This unit does not control the
volume of the plasma display
• Vol C.On – When this unit is switched to
an input that used the plasma display
(DVD, for example), the volume on the
plasma display is muted so only sound
from this unit is heard.
• This setting works only with dual mono
encoded Dolby Digital or DTS soundtracks.
See the disc packaging for channel
information.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround sound and other settings
08
Function setting for DVD input
Setting the channel levels
• DVD -> OFF/PDP1–5/PDPTV – Matches
the DVD function of this unit with a
numbered video input on the plasma
display. For example, DVD -> PDP2
matches the DVD input with video input 2
on the plasma display.
You can set the relative channel levels from
your main listening position for all of the
listening modes independently. However, the
SURROUND modes are divided into two
independent groups: multichannel listening
modes and stereo listening modes only.
If you used the Room Setup feature (page 16),
the channel levels for each listening mode will
already be set. However, you can still fine-tune
the levels here if you need to.
Function setting for TV input
• TV -> OFF/PDP1–5/PDPTV – Matches the
TV function of this unit with a numbered
video input on the plasma display. For
example, TV -> PDP1 matches the TV
input with video input 1 on the plasma
display.
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
FRONT
SURROUND
OPEN CLOSE
0
8
3
7
CH LEVEL
1
¡
SURROUND ADVANCED VIRTUAL SB
Function setting for L1 input
4
4
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
• LINE1 -> OFF/PDP1–5/PDPTV – Matches
the LINE (L1) function of this unit with a
numbered video input on the plasma
display. For example, LINE1 -> PDP3
matches the LINE1 input with video input 3
on the plasma display.
HOME
MENU
DVD MENU
RETURN
SOUND
ZOOM
1
TOP MENU
2
3
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
ENTER
TIMER/
DIMMER
7
DISPLAY
8
CLOCK
MUTE
9
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
MASTER
VOLUME
ROOM SETUP
MAIN
SUB
TV CONTROL
Function setting for L2 input
• LINE2 -> OFF/PDP1–5/PDPTV – Matches
the LINE (L2) function of this unit with a
numbered video input on the plasma
display. For example, LINE2 -> PDP3
matches the LINE2 input with video input 3
on the plasma display.
1
Select a listening mode.
Press SURROUND, ADVANCED or FRONT
SURROUND repeatedly to select the listening
mode you want.
2
Switch the remote control to SUB, then
press TEST TONE to hear the test tone.
The test tone is output in the following order
(from the speakers active in the current
listening mode):
• L – Front left speaker
• C – Center speaker
• R – Front right speaker
• RS – Right surround speaker
• LS – Left surround speaker
• SW – Subwoofer
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Surround sound and other settings
3
Use the MASTER VOLUME +/– button to
adjust the volume to an appropriate level.
Turn down the volume to 40 or less to ensure
you have adequate headroom.
4
Use the ꢀ/ꢁ (cursor up/down) buttons
to adjust the speaker levels in turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is 10 dB.
5
When you’re done, press ENTER to exit
test tone setup.
Tip
• The speaker volume can be adjusted while
listening to any sound source you want by
pressing CH LEVEL and then using the ꢀ/
ꢁ (cursor up/down) buttons to adjust the
channel levels. After you’re finished with
one channel, use the ꢂ/ꢃ (cursor left/
right) buttons to move to the next.
Note
• When the Auto listening mode is selected,
using the test tone method will adjust
levels for multichannel sources only. Use
CH LEVEL and the ꢀ/ꢁ (cursor up/down)
buttons (see tip above) to set levels for the
Auto listening mode with two channel
sources.
• Since the subwoofer produces ultra-low
frequencies its sound may seem quieter
than it actually is.
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjust menu
09
Chapter 9
Video Adjust menu
2
Press ꢁ (cursor down) to select
Video Adjust
‘Detailed Settings’ then press ENTER.
• Default setting: Standard
From the Video Adjust screen you can select
the standard video presentation or define
presets of your own.
Video Adjust
Memory1
Detailed Settings
1
Press HOME MENU and select ‘Video
3
Adjust the picture quality settings.
Adjust’ from the on-screen display.
Memory1
Video Adjust
Recall Settings
Contrast
Memory1
min
min
min
max
max
max
2
Use the ꢂ/ꢃ(cursor left/right) buttons
Brightness
to select a preset.
Chroma Level
Video Adjust
Standard
• Use the ꢀ/ꢁ (cursor up/down) buttons to
select a setting.
• Standard – Normal
• Use the ꢂ/ꢃ (cursor left/right) buttons to
adjust the current setting.
• Memory1–2 – Use for saving your own
presets (see below)
• Press DISPLAY to switch between full and
single view.
3
Press ENTER to make the setting and
exit the Video Adjust screen.
• You can change the preset number from
the Recall Settings menu item.
You can adjust any or all of the following
picture quality settings:
Note
• Depending on the disc and the TV/monitor,
you may not see the effect clearly.
• Contrast – Adjusts the contrast between
light and dark.
• Brightness – Adjusts the overall bright-
ness.
Creating your own presets
You can create up to three presets of your own.
• Chroma Level – Adjusts how saturated
1
Select one of the Memory presets (see
colors appear.
above).
4
Press ENTER to save the preset and exit
the Video Adjust screen.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Initial Settings menu
Chapter 10
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
2
Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
Note
1
Press HOME MENU and select ‘Initial
• In the table below, the default setting is
shown in bold: other settings are shown in
italics.
Settings’.
Initial Settings
• Some settings, such as TV Screen, Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
Video Output settings
Setting
Option
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
TV Screen
4:3 (Letter Box)
(See also Screen sizes
and disc formats on
page 66.)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
4:3 (Pan & Scan)
Set if you have a widescreen TV.
16:9 (Wide)
Interlace
Set if your TV is not compatible with progressive scan video.
Component Out
(See also Connecting
using the component
video output on
Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). Press ENTER once
more to confirm (or RETURN to cancel).
Note that progressive scan video is only output from the
component video jacks and that there is no output from the
composite and S-video jacks when this setting is selected.
Progressive
page 54.)
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings menu
10
Setting
Option
S2
What it means
Standard setting.
S-Video Out
(See also Connecting
using the S-video output
on page 54.)
If you find that the picture is stretched or distorted on the
default S2 setting, try changing it to this setting.
S1
Language settings
Setting
Option
English
What it means
If there is an English soundtrack on the disc then it will be
played.
Audio Language
If there is the language selected on the disc, then it will be
played.
Languages as displayed
Other Language
Select to choose a language other than the ones displayed (see
Selecting languages using the language code list on page 66).
If there is are English subtitles on the disc then they will be
displayed.
Subtitle Language English
Languages as displayed
If there is the subtitle language selected on the disc, then it will
be displayed.
Select to choose a language other than the ones displayed (see
Selecting languages using the language code list on page 66).
Other Language
w/Subtitle Lang.
Languages as displayed
Other Language
On
DVD disc menus will be displayed in the same language as
your selected subtitle language, if possible.
DVD Menu Lan-
guage
DVD disc menus will be displayed in the selected language, if
possible.
Select to choose a language other than the ones displayed
(Selecting languages using the language code list on page 66).
Subtitles are displayed according to your selected subtitle
language (see above).
Subtitle Display
Subtitles are always off by default when you play a DVD disc
(note that some discs override this setting).
Off
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Initial Settings menu
Display settings
Setting
Option
What it means
On-screen displays of the player are in English.
OSD Language
English
On-screen displays are shown in the language selected.
Languages as displayed
Operation displays (Play, Resume, Scan, and so on) are
shown on-screen.
On Screen Display On
Operation displays are not shown.
Off
A camera icon is displayed on-screen during multi-angle
scenes on a DVD disc.
Angle Indicator
On
No multi-angle indication is shown.
Off
Options
Setting
Option
See below
On
What it means
See Parental Lock below.
Parental Lock
Only the JPEG files are shown on discs that contains both
WMA/MP3 audio files and JPEG picture files.
Photo Viewer
Setting does not take
effect until the next disc
is loaded (or the current
disc is reloaded).
WMA/MP3 audio file playback is possible.
Off
• If you forget your password, you’ll need to
reset the player to register a new password.
(see Resetting the system on page 58)
Parental Lock
• Default level: Off; Default password: none;
Default Country code: us (2119)
To give you some control over what your
children watch on your DVD player, some DVD-
Video discs feature a Parental Lock level. If
your player is set to a lower level than the disc,
the disc won’t play.
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country code.
Some discs also support the Country Code
feature. The player does not play certain
scenes on these discs, depending on the
Country Code you set.
1
Select ‘Password’.
Initial Settings
Video Output
Language
Display
Parental Lock
PhotoViewer
Password
Level Change
Country Code
Note
Options
• Not all discs use Parental Lock, and will
play without requiring the password first.
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings menu
10
2
Use the number buttons to enter a 4-
• Select by code number: Press ꢃ(cursor
right) then use the number buttons to enter
the 4-digit Country code.
digit password.
The numbers you enter show up as asterisks
(*) on-screen.
The new Country code is set and you will return
to the Options menu screen. Note that the new
Country code doesn’t take effect until the next
disc is loaded (or the current disc is reloaded).
3
Press ENTER to register the password.
You will return to the Options menu screen.
Changing your password
To change your password, confirm your
existing password then enter a new one.
1
2
Select ‘Password Change’.
Use the number buttons to enter your
existing password, then press ENTER.
3
Enter a new password and press ENTER.
This registers the new password and you will
return to the Options menu screen.
Setting/changing the Parental Lock
1
2
Select ‘Level Change’.
Use number buttons to enter your
password, then press ENTER.
3
Select a new level and press ENTER.
• Press ꢂ (cursor left) repeatedly to lock
more levels (more discs will require the
password); press ꢃ (cursor right) to
unlock levels. You can’t lock level 1.
This sets the new level and you will return to the
Options menu screen.
Setting/changing the Country code
You can find the Country code list on page 67.
1
Select ‘Country Code’.
2
Use number buttons to enter your
password, then press ENTER.
3
Select a Country code and press ENTER.
There are two ways you can do this:
• Select by code letter: Use ꢀ/ꢁ (cursor up/
down) to change the Country code.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Other connections
Chapter 11
Other connections
Connecting external antennas
Connecting auxiliary
components
External AM antenna
This system has both stereo analog inputs and
outputs, as well as a optical digital input. Use
these to connect external components, such
as your VCR, MD or CD-R recorder.
Use 15–18 ft. (5–6 meters) of vinyl-insulated
wire and set up either indoors or outdoors.
Leave the AM loop antenna connected.
Outdoor antenna
AUDIO
OUTPUT
Indoor
antenna
(vinyl-coated
TV
AM
LOOP ANTENNA
wire)
15–18 ft. (5–6m)
XV–DV440/740
IN
IN
OUT
External FM antenna
CENTE
6
FR6ONT
PEAKERS
Use a PAL connector to hook up an external
FM antenna.
L
L
TV AUDIO LINE
1
R
R
6
6
6
SUB
WOOFER
•
Connect the TV (IN) jacks to the audio
outs of your TV (or VCR).
This will enable you to hear the TV (or VCR)
through this system. Connect using RCA pin-
plug stereo cables.
PAL connector
ANTENNA
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Other connections
11
Tape deck, etc.
Tip
• If you’re playing a high signal level source
which is producing unpleasant distortion
from the speakers, you can reduce the
signal level of the auxiliary source
(connected to the TV or LINE 1 analog
inputs) by switching on the attenuator. See
Optional system settings on page 57 to do
this.
AUDIO
OUTPUT
AUDIO
INPUT
XV-DV440/740
Recording mode
IN
IN
OUT
CENTER
SURR
6
FR6ONT
6
The Recording mode allows you to make
surround-compatible analog recordings from
the LINE 1 (OUT) jacks. Dolby multichannel
sources will be downmixed to stereo for
improved playback with systems that can
provide matrix-decoding (like Dolby Pro Logic).
EAKERS
L
TV AUDIO LINE
1
R
R
6
6
6
SUB
WOOFER
•
Connect the LINE 1 (IN) jacks to the
analog outputs of an external playback
component.
1
Press SOUND.
These include components such as a VCR or
cassette deck. Connect using RCA pin-plug
stereo cables.
2
Use the ꢂ/ꢃ(cursor left/right) buttons
to select ‘Rec Mode?’.
3
Press ENTER.
•
Connect the LINE 1 (OUT) jacks to the
4
Use the ꢀ/ꢁ (cursor up/down) buttons
analog inputs of an external recording
component.
to select ‘R.Mode On’ or ‘R.Mode Off’.
• R.Mode On – A surround-compatible
downmix (left-total/right-total, or Lt/Rt) of
Dolby multichannel sources is output,
(suitable for Dolby Surround Pro Logic or
other matrix decoding).
These include components such as a cassette
deck, VCR, MD, or another recorder with
analog inputs. Connect using RCA pin-plug
stereo cables.
•
Connect the LINE 2 (OPTICAL IN) jack on
• R.Mode Off – A simple stereo downmix
(left-only/right-only, or Lo/Ro) is output
(suitable for playback on a two-channel
stereo system or on headphones).
the rear panel to the optical digital output
of an external playback component.
OPTICAL IN
LINE 2
Note
• When Recording mode is on, most
surround sound-related functions cannot
be used. The display will briefly blink
RecMode On if you try and use a
prohibited function while Recording mode
is on.
These include digital components such as an
MD player, digital satellite, or a game system.
Connect using a optical digital cable (not
supplied).
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Other connections
• When Recording mode is off, the audio
from the analog output may be interrupted,
depending on the operation.
Connecting using the
component video output
If your TV has component video inputs, you can
use these instead of the standard video output
to connect this system to your TV. This should
give you the best quality picture from the three
types of video output available.
• The Recording mode automatically
switches off if you change the input
function (DVD/CD, TUNER, etc.) or switch
the power off.
•
Use a component video cable (not
Connecting using the S-video
output
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
If your TV has an S-video input, you can use this
instead of the standard video output for a
better quality picture.
•
Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
COMPONENT
INPUT
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
TV
XV–DV440/740
IN
CONTROL
ANTENN
S-VIDEO
INPUT
AM
BAL
OOP ANTENNA
Y
PB
PR
TV
COMPONENT VIDEO OUT
XV–DV440/740
Note
OPTICAL IN
IN
AUDIO
CONTROL
ANTENNA
• The component video output is switchable
between interlaced and progressive
formats. See Video Output settings on
page 48 for more on this.
FM
AM
LINE 2
UNBAL 75Ω
LOOP ANTENNA
S-VIDEO VIDEO
Y
PB
PR
OUT
OUT
VIDEO
COMPONENT VIDEO OUT
About progressive scan video
Note
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
• The S-video output is switchable between
S1 and S2 formats for compatibility with all
TVs. See Video Output settings on page 48
to change this setting.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Other connections
11
Using this unit with a Pioneer
plasma display
Important
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the system to progressive, you will not be
able to see any picture at all. In this case,
press ꢃ STANDBY/ON to put the system
in standby, then press and hold the front
panel ꢂ (stop) button for about 8 seconds
until the display shows Mem.Clr.?. Press
the front panel VOLUME – (DOWN) or +
(UP) button so that the display shows
Interlace?. Press the front panel ꢁ
button to set to interlace and switch the
system back on.
If you have a Pioneer plasma display (models
PRO-1110HD, PRO-910HD, PDP-5040HD and
PDP-4340HD), you can use an SR+ cable (see
note below) to connect it to this unit and take
advantage of various convenient features,
such as automatic video input switching of the
plasma display when the input is changed.
Media receiver
CONTROL
OUT
Pioneer plasma display
Compatibility of this player with
progressive-scan and high-definition TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
XV-DV440/740
IN
Consumers should note that not all high-
definition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525
progressive scan picture problems, it is
recommended that the user switch the
connection to the ‘standard definition’ output
(Interlace). If there are questions regarding our
TV set compatibility with this model, please
contact our customer service center.
CONTROL
FM
AM
ANTENNA
UNBAL 75Ω
LOOP ANTENNA
Y
PB
PR
COMPONENT VIDEO OUT
•
Use a 3-ringed miniplug SR+ cable to
This system is compatible with the following
Pioneer displays and monitors:
connect the CONTROL IN jack of this unit
through a media receiver to the CONTROL
OUT jack of your plasma display.
Plasma display
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ control options for Pioneer plasma displays
on page 44 for detailed instructions.
PDP-505HD, PDP-5030HD, PDP-4330HD, PDP-
5040HD, PDP-4340HD, PRO-10000HD, PRO-
800HD, PRO-1000HDI, PRO-800HDI, PRO-
1110HD, PRO-910HD, PDP-4300, PDP-5031
Projection monitor receiver
SD-533HD5, SD-643HD5, PRO-710HD, PRO-
610HD, PRO-510HD, PRO-720HD, PRO-
620HD, PRO-520HD, PRO-730HD, PRO-
630HD, PRO-530HD, PRO-730HDI, PRO-
530HDI
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Other connections
• The automatic volume muting feature is
enabled separately; see SR+ control
options for Pioneer plasma displays on
page 44. (You can also use the System
Setup menu to switch the SR+ mode of
this unit.)
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a
number of features (such as automatic video
input switching and volume muting on the
plasma display) become available to make
using this unit with your Pioneer plasma
display even easier.
• If you disconnect the SR+ cable or switch
the plasma display off while SR+ is on, the
setting automatically reverts to SR+ OFF.
This displays an error if you switch the
input of the unit with the plasma display
switched off. Likewise, if this unit is
switched off, the link with the plasma
display will be terminated.
See also SR+ control options for Pioneer
plasma displays on page 44 for information on
setting up the unit.
1
Make sure that the plasma display and
this unit are switched on and that they are
connected with an SR+ cable.
See Using this unit with a Pioneer plasma
display above for more on connecting these
components.
2
To switch SR+ mode on/off, press SR+
(SHIFT + 7).
The front panel display shows the new setting;
SR+ ON or SR+ OFF.
• If SR+ Error shows in the display, it means
there is a communication problem
between the unit and the plasma display.
Check all connections and retry.
Note
• The 3-ringed SR+ cable from Pioneer is
commercially available under the part
number ADE7095. Contact the Pioneer
Customer Support division for more
information on obtaining an SR+ cable.
• You won’t be able to use the remote sensor
of this unit with the CONTROL IN jack of
this unit connected to the CONTROL OUT
jack of your plasma display. You can use
the remote sensor of the plasma display
(even in standby) as long as the power isn’t
switched off.
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
12
Chapter 12
Additional information
Child lock setting
The Child Lock feature is useful when you’ve
set the wake-up timer and don’t want the
system switched on before it activates.
Optional system settings
These settings are accessed by using the
System Setup menu while in standby.
FRONT
SURROUND
OPEN CLOSE
BASS MODE DIALOGUE
CH LEVEL
• Lock On – Makes the front panel buttons
and controls inoperative.
0
8
3
7
SURROUND ADVANCED VIRTUAL SB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
1
4
¡
SUBTITLE
• Lock Off – Restores regular use of the
front panel buttons and controls.
4
HOME
MENU
ZOOM
1
TOP MENU
2
3
DVD MENU
RETURN
QUIET/
SYSTEM
MIDNIGHT
TEST TONE
5
SETUP
4
6
TIMER/
Clock format setting
Specifies how the clock is displayed:
DIMMER
7
DISPLAY
8
CLOCK
ENTER
9
SR+
CLR
FOLDER–
0
FOLDER+
ENTER
MUTE
SOUND
• 12-Hour – Sets the clock to show in 12-
ROOM SETUP
MAIN
SUB
hour format in the display.
MASTER
VOLUME
• 24-Hour – Sets the clock to show in 24-
hour format in the display.
1
2
3
Switch the system into standby.
Press SYSTEM SETUP.
TV attenuator setting
Use the ꢂ/ꢃ(cursor left/right) buttons
If the source connected to the TV analog input
is producing distortion through the speakers,
the attenuator will reduce the signal level.
to choose the setting you want to adjust
then press ENTER.
The current setting is shown for each option as
you cycle through the display. See below for a
full list and description of each.
• ATT 6dB – Reduces the signal level by 6dB.
• ATT 10dB – Reduces the signal level by
10dB.
4
Use the ꢀ/ꢁ (cursor up/down) buttons
• ATT Off – No attenuation
to adjust the setting.
5
Repeat steps 2 and 3 to make other
Line attenuator setting
settings.
If the source connected to the LINE analog
input is distorting, the attenuator can reduce
the signal level.
6
Press ENTER to confirm.
• ATT 6dB – Reduces the signal level by 6dB.
System Setup menu options in standby
Below are all the available settings in the setup
menu. The first setting in each section is the
default. See also the notes in each section for
additional information about the settings.
• ATT 10dB – Reduces the signal level by
10dB.
• ATT Off – No attenuation
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Additional information
Frequency step setting
Using and taking care of discs
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
Titles, chapters and tracks
DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
• FM50. AM9
• FM100. AM10
System demo setting
Switches the automatic demo feature on or off
(this starts when the system is plugged in for
the first time):
Title 1
Title 2
Title 3
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
• Demo On – Switches the demo feature on.
CDs and Video CD/Super VCDs are divided into
tracks.
• Demo Off – Switches the demo feature off.
Note
• After setting the clock, the demo mode
switches off automatically. However, if you
unplug the system from the wall outlet, the
demo mode will revert to Demo On (and
the clock will be reset).
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
CD-ROMs contain folders and files. MP3 and
WMA files are referred to as tracks. Folders
may contain further folders.
Resetting the system
Use this procedure to reset all system settings
to the factory default.
Folder A
Track 1
Folder B Folder C
1
Switch the system into standby.
Track 2
Track 3
Track 1
File 1
File 2
2
Press and hold the front panel ꢂ (stop)
button for about 8 seconds until the
display shows ‘Mem.Clr.?’.
DVD Video regions
All DVD Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD system also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. Discs marked ALL will play in any
player.
3
Press the front panel ꢁ button.
All the system’s settings are now reset, and
you should see the ‘Let’s Get Started’ screen.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
12
The diagram below shows the various DVD
regions of the world.
If necessary, use a cloth soaked in alcohol, or a
commercially available CD/DVD cleaning kit to
clean a disc more thoroughly. Never use
benzine, thinner or other cleaning agents,
including products designed for cleaning vinyl
records.
Storing discs
Although CDs and DVD discs are more durable
than vinyl records, you should still take care to
handle and store discs correctly. When you're
not using a disc, return it to its case and store
upright. Avoid leaving discs in excessively cold,
humid, or hot environments (including under
direct sunlight).
Handling discs
When holding discs of any type, take care not
to leave fingerprints, dirt or scratches on the
disc surface. Hold the disc by its edge or by the
center hole and edge.
Don't glue paper or put stickers onto the disc,
or use a pencil, ball-point pen or other sharp-
tipped writing instrument. These could all
damage the disc.
Damaged or dirty discs can affect playback
performance. Take care also not to scratch the
label side of the disc. Although not as fragile as
the recorded side, scratches can still result in
a disc becoming unusable.
Should a disc become marked with
fingerprints, dust, etc., clean using a soft, dry
cloth, wiping the disc lightly from the center to
the outside edge as shown in the diagram
below.
For more detailed care information see the
instructions that come with discs.
Do not load more than one disc into the player
at a time.
Discs to avoid
Discs spin at high speed inside the player. If
you can see that a disc is cracked, chipped,
warped, or otherwise damaged, don't risk
using it in your player—you could end up
damaging the unit.
Wipe lightly from the center of the disc using
straight strokes.
Don’t wipe the disc surface using circular
strokes.
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Additional information
This unit is designed for use with conventional,
fully circular discs only. Use of shaped discs is
not recommended for this product. Pioneer
disclaims all liability arising in connection with
the use of shaped discs.
ꢅ Place on an unstable surface, or one that is
not large enough to support all four of the
unit’s feet.
Cleaning the pickup lens
The DVD player’s lens should not become dirty
in normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center.
Although lens cleaners are commercially
available, we do not recommend using them
since some may damage the lens.
Proper installation and
maintenance of this system
Hints on installation
We want you to enjoy using this system for
years to come, so please bear in mind the
following points when choosing a suitable
location for it:
Problems with condensation
Condensation may form inside the player if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won’t damage the
player, it may temporarily impair its
Do...
ꢄUse in a well-ventilated room.
ꢄPlace on a solid, flat, level surface, such as
a table, shelf or stereo rack.
performance. For this reason you should leave
it to adjust to the warmer temperature for
about an hour before switching on and using.
Don’t...
ꢅ Use in a place exposed to high
temperatures or humidity, including near
radiators and other heat-generating
appliances.
Moving the system unit
If you need to move the main unit, first remove
a disc if there’s one in the player, then press ꢃ
STANDBY/ON on the front panel to turn the
system off. Wait for Good Bye to disappear
from the display, then unplug the power cord.
Never lift or move the unit during playback—
discs rotate at a high speed and may be
damaged.
ꢅ Place on a window sill or other place where
the system will be exposed to direct
sunlight.
ꢅ Use in an excessively dusty or damp
environment.
ꢅ Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
ꢅ Use near a television or monitor as you may
experience interference—especially if the
television uses an indoor antenna.
Note
• Unplugging the unit before Good Bye
disappears from the display may cause the
system to return to the factory settings.
ꢅ Use in a kitchen or other room where the
system may be exposed to smoke or steam.
ꢅ Use on a thick rug or carpet, or cover with
cloth—this may prevent proper cooling of
the system.
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
12
Power cord caution
Handle the power cord by the plug. Do not pull
out the plug by tugging the cord and never
touch the power cord when your hands are wet
as this could cause a short circuit or an electric
shock. Do not place this unit, a piece of
furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it
with other cords. The power cords should be
routed such that they are not likely to be
stepped on. A damaged power cord can cause
a fire or give you an electrical shock.
Check the power cord once in a while. When
you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Investigate the other components and electrical appliances being used. If the
trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
Important
• If the system does not operate normally due to external effects such as static electricity
disconnect the power plug from the outlet and insert again to return to normal operating
conditions.
General
Problem
Remedy
The power does not
turn on.
• Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
• Make sure there are no loose strands of speaker wire touching the rear
panel. This could cause the system to shut off automatically.
No sound is output
when a function is
selected.
• If you’re using the line input, make sure the component is connected
correctly (see Connecting auxiliary components on page 52).
• Press MUTE on the remote control to turn muting off.
• Adjust the VOLUME.
No image is output
when playing discs.
• Make sure the TV is connected correctly (refer to the Setup Guide).
• Reset the video output to interlace (see Video Output settings on page 48).
No sound from
surround or center
speakers.
• Refer to Setting the channel levels on page 45 to check the speaker levels.
• Check that you haven’t selected the STEREO sound mode (see Listening in
surround sound on page 25).
• Connect the speakers properly (refer to the Setup Guide).
Can’t operate the
remote control.
• Replace the batteries (refer to the Setup Guide).
• Operate within 23 ft. (7 m), 30° of the remote sensor on the front panel (refer
to the Setup Guide).
• Remove any obstacles or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
• You won’t be able to use the remote sensor of this unit with the CONTROL
IN jack of this unit connected to the CONTROL OUT jack of your plasma
display. You can use the remote sensor of the plasma display (even in
standby) as long as the power isn’t switched off.
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
12
Problem
Remedy
Sound Demo shows in
the display and the unit
can’t be controlled.
• Press and hold ꢂ (stop) on the front panel for about five seconds. The disc
tray ejects automatically to indicate the Sound Demo mode is disabled.
Timer indicator is
blinking and the
• Unplug the unit, then plug back in. Wait for one minute then switch on.
• Make sure the fan at the rear of the unit is not being blocked.
system will not switch • Check that the speakers are connected correctly.
on. • Make sure the voltage of the mains power source is correct for the model.
• If the problem persists, take it to your nearest Pioneer
authorized service center or your dealer for servicing.
DVD/CD/Video CD player
Problem
Remedy
The disc is ejected
automatically after
loading.
• Clean the disc.
• Align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on
the player, the disc cannot be used (see DVD Video regions on page 58).
• Allow time for any condensation inside the player to evaporate. Avoid using
the player near an air-conditioning unit.
Playback is not
possible.
• If the disc is loaded upside down, reload the disc with the label side face
up.
Picture playback stops
and the operation
buttons cannot be
used.
• Press ꢂ (stop), then ꢄ (play) to start playback again.
• Switch the power off once, then on again using the front panel
ꢃ STANDBY/ON button.
Settings are canceled. • When the power is cut due to power failure or by unplugging the power
cable, settings will be canceled.
No picture/No color.
• Check that connections are correct and that plugs are inserted fully.
• Check the instruction manual of the TV/monitor to make sure the TV/
monitor settings are incorrect.
Screen is stretched or
aspect does not
change.
• The TV Screen setting is incorrect. Set the TV Screen option to match the
TV/monitor you're using (see Video Output settings on page 48).
When recorded on a
• This system uses copy-protection technology which may prevent recording
VCR or passed through or cause picture problems when connected through a VCR or AV selector.
an AV selector, there is This is not a malfunction.
disturbance in the
playback picture.
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Additional information
Problem
Remedy
CD won’t play
• Set the PhotoViewer menu option in the Initial Settings menu to Off to be
able to play some copy-protected CDs. See Options on page 50.
Picture disturbance
during playback or
dark.
• This player is compatible with Macro-Vision System copy guard. Some
discs include a copy prevention signal, and when this type of disc is played
back, stripes etc., may appear on some sections of the picture depending on
the TV. This is not a malfunction.
• Discs respond differently to particular player functions. This may result in
the screen becoming black for a brief instant or shaking slightly when the
function is executed. These problems are largely due to differences between
discs and disc content and are not malfunctions of this player.
Noticeable difference
in DVD and CD
volume.
• DVDs and CDs use different recording methods. This is not a malfunction.
WMA/MP3/JPEG discs
Problem
Remedy
CD-ROM disc is not
recognized by the
system.
• Make sure that the CD-ROM was recorded using the ISO 9660 disc format.
See Disc / content format playback compatibility on page 7 for other disc
compatibility information.
Files don’t show up in • The files on the disc must be named with the correct file extension: .mp3
the Disc Navigator/
Photo Browser.
for MP3 files; .wma for WMA files; .jpg for JPEG files (upper or lower-case is
OK). See Disc / content format playback compatibility on page 7 for other disc
compatibility information.
Can play JPEG files,
but not WMA/MP3
• Set the PhotoViewer menu option in the Initial Settings menu to Off to be
able to access the WMA/MP3 files. Set to On to be able to play the JPEG files.
files on the same disc See Options on page 50.
(or vice versa).
Can’t play WMA files. • The files were recorded using DRM (digital rights management). This is not
a malfunction. See DRM in the Glossary on page 69.
Tuner
Problem
Remedy
Considerable noise in • Connect the antenna (refer to the Setup Guide) and adjust the direction and
radio broadcasts.
position for best reception.
• Fully extend the FM wire antenna, position for best reception, and secure to
a wall.
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
12
Problem
Remedy
Considerable noise in • Connect an outdoor FM antenna (see Connecting external antennas on
radio broadcasts
page 52).
(continued).
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and Connecting external antennas on page 52).
• Turn off any other equipment that may be causing the noise or move it away
from the main unit.
• The tuning interval is incorrect for your country or region. Try switching the
tuning interval (frequency step) (see Frequency step setting on page 58).
Auto tuning does not • The radio signal is weak. Auto tuning will only detect radio stations with a
pick up some stations. good signal. For more sensitive tuning, connect an outdoor antenna.
Sound is mono only.
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 22).
Error Messages
Message
Description
Child Lock
• This message appears when the front panel buttons are pressed when the
child lock feature is active. See Child lock setting on page 57 for more on
switching on/off the child lock.
Rec Mode On
Phones In
96k Stereo
No Surr. SP
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see Recording mode on page 53).
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited because there
is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (press the MUTE button to turn the sound on).
Exit
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
SR+ Error
• Appears when there is a communication problem between the unit and the
plasma display. Check all connections and retry.
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Additional information
Set to 4:3 (Pan&Scan), widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don’t
actually see the whole picture.
Screen sizes and disc formats
DVD-Video discs come in several different
screen aspects, ranging from TV programs,
which are generally 4:3, to CinemaScope
widescreen movies, with an aspect ratio of up
to about 7:3.
Televisions also come in different aspect
ratios; ‘standard’ 4:3 and widescreen 16:9.
Widescreen TV users
Please note that many widescreen discs
override the system’s settings so that the disc
is shown in letterbox format regardless of the
setting.
If you have a widescreen TV, the TV Screen
setting (see Video Output settings on page 48)
of this system should be set to 16:9 (Wide).
When you watch discs recorded in 4:3 format,
you can use the TV controls to select how the
picture is presented. Your TV may offer various
zoom and stretch options; see the instructions
that came with your TV for details.
Tip
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3 settings
with a widescreen TV, will result in a
distorted picture.
Please note that some movie aspect ratios are
wider than 16:9, so even though you have a
widescreen TV, these discs will still play in a
‘letterbox’ style with black bars at the top and
bottom of the screen.
Selecting languages using the
language code list
Some of the language options (see Language
settings on page 49) allow you to set your
preferred language from any of the 136
languages listed in the Language code list on
page 67.
Standard TV users
If you have a standard TV, the TV Screen
setting (see Video Output settings on page 48)
of this system should be set to 4:3 (Letter Box)
or 4:3 (Pan&Scan), depending on which you
prefer.
1
Select ‘Other Language’.
Set to 4:3 (Letter Box), widescreen discs are
shown with black bars top and bottom.
2
Use the ꢂ/ꢃ(cursor left/right) buttons
to select either a code letter or a code
number.
3
Use the ꢀ/ꢁ (cursor up/down) buttons
to select a code letter or a code number.
See the Language code list (next page) for a
complete list of languages and codes.
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
12
Language code list
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Dutch (nl), 1412
Russian (ru), 1821
Chinese (zh), 2608
Korean (ko), 1115
Greek (el), 0512
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Lingala (ln), 1214
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swedish (sv), 1922
Swahili (sw), 1923
Tamil (ta), 2001
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Kirghiz (ky), 1125
Latin (la), 1201
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Portuguese (pt), 1620
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813 Ukrainian (uk), 2111
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Welsh (cy), 0325
Danish (da), 0401
Bhutani (dz), 0426
Esperanto (eo), 0515
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Country code list
Country, Country code, Country code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
China, 0314, cn
Denmark, 0411, dk
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Japan, 1016, jp
Korea, Republic of, 1118, kr
Malaysia, 1325, my
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Russian Federation, 1821, ru
Singapore, 1907, sg
Spain, 0519, es
Switzerland, 0308, ch
Sweden, 1905, se
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
United States of America, 2119, us
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Additional information
Preset code list
Please note that there are cases where only certain functions may be controllable after assigning
the proper preset code, or the codes for the manufacturer in the list will not work for the model
that you are using.
ACURA 644
ADMIRAL 631
AIWA 660
AKAI 632, 635, 642
AKURA 641
ALBA 607, 639, 641, 644
AMSTRAD 642, 644, 647
ANITECH 644
FRONTECH/PROTECH 632
FUJITSU 648, 629
FUNAI 640, 646, 658
GBC 632, 642
GE 601, 608, 607, 610, 617, 602, 647, 648
628, 618
GEC 607, 634, 648
GELOSO 632, 644
GENEXXA 631, 641
MANESTH 639, 646
MARANTZ 607
MARK 607
SAMBERS 649
SAMSUNG 607, 638, 644, 646
SANYO 635, 645, 648, 621, 614
MATSUI 607, 639, 640, 642, 644, SBR 607, 634
SCHAUB LORENZ 642
SCHNEIDER 607, 641, 647
SEG 642, 646
MEDIATOR 607
MEMOREX 644
METZ 631
ASA 645
MINERVA 631, 653
MCMICHAEL 634
ASUKA 641
GOLDSTAR 610, 623, 621, 602, MITSUBISHI 609, 610, 602, 621, SEI 632, 640, 649
AUDIOGONIC 607, 636
BASIC LINE 641, 644
BAUR 631, 607, 642
BEKO 638
607, 650
631
SELECO 631, 642
SHARP 602, 619, 627
SIAREM 632, 649
GOODMANS607, 639, 647, 648, MULTITECH 644, 649
656
NEC 659
GORENJE 638
GPM 641
NECKERMANN 631, 607
NEI 607, 642
SIEMENS 631
SINUDYNE 632, 639, 640, 649
BEON 607
BLAUPUNKT 631
BLUE SKY 641
BLUE STAR 618
BPL 618
GRAETZ 631, 642
GRANADA 607, 635, 642, 643, NOBLIKO 649
648
GRADIENTE 630, 657
GRANDIN 618
BRANDT 636
BTC 641
BUSH 607, 641, 642, 644, 647,
656
CASCADE 644
CATHAY 607
GRUNDIG 631, 653
HANSEATIC 607, 642
HCM 618, 644
HINARI 607, 641, 644
HISAWA 618
OCEANIC 631, 632, 642
ORION 632, 607, 639, 640
OSAKI 641, 646, 648
OSO 641
SONY 604
SOUNDWAVE 607
STANDARD 641, 644
STERN 631
OSUME 648
SUSUMU 641
CENTURION 607
CGB 642
CIMLINE 644
CLARIVOX 607
CLATRONIC 638
CONDOR 638
HITACHI 631, 633, 634, 636, 642, OTTO VERSAND 631, 632, 607, SYSLINE 607
643, 654, 606, 610, 624, 625, 618 642 TANDY 631, 641, 648
HUANYU 656
HYPSON 607, 618, 646
ICE 646, 647
PALLADIUM 638
PANAMA 646
PANASONIC 631, 607, 608,642, TEC 642
TASHIKO 634
TATUNG 607, 648
IMPERIAL 638, 642
INDIANA 607
INGELEN 631
622
TELEAVIA 636
TELEFUNKEN 636, 637, 652
TELETECH 644
CONTEC 644
CROSLEY 632
PATHO CINEMA 642
PAUSA 644
CROWN 638, 644
CRYSTAL 642
CYBERTRON 641
DAEWOO 607, 644, 656
DAINICHI 641
DANSAI 607
DAYTON 644
TENSAI 640, 641
THOMSON 636, 651, 652, 663
THORN 631, 607, 642, 645, 648
TOMASHI 618
TOSHIBA 605, 602, 626, 621, 653
TOWADA 642
ULTRAVOX 632, 642, 649
DECCA 607, 648
DIXI 607, 644
DUMONT 653
ELIN 607
ELITE 641
ELTA 644
EMERSON 642
ERRES 607
FERGUSON 607, 636, 651
FINLANDIA 635, 643, 655
FINLUX 632, 607, 645, 648,
653, 654, 655
FIRSTLINE 640, 644
FISHER 632, 635, 638, 645
FORMENTI 632, 607, 642
FRONTECH 631, 642, 646
KAISUI 618, 641, 644
KAPSCH 631
KENDO 642
KENNEDY 632, 642
KORPEL 607
KOYODA 644
LEYCO 607, 640, 646, 648
LIESENK&TTER 607
LOEWE 607
LUXOR 632, 642, 643
M-ELECTRONIC 631, 644, 645, REX 631, 646
654, 655, 656, 607, 636, 651
MAGNADYNE 632, 649
MAGNAFON 649
MAGNAVOX607, 610, 603, 612, SALORA 631, 632, 642, 643
629
QUELLE 631, 632, 607, 642, 645, UNIVERSUM 631, 607, 638, 642,
653
R-LINE 607
645, 646, 654, 655
VESTEL 607
RADIOLA 607
RADIOSHACK 610, 623, 621,
602
VICTOR 613
VOXSON 631
WALTHAM 643
WATSON 607
RBM 653
RCA 601, 610, 615, 616, 617, 618, WATT RADIO 632, 642, 649
661, 662, 609
REDIFFUSION 632, 642
WHITE
WESTINGHOUSE 607
YOKO 607, 642, 646
ZENITH 603, 620
PIONEER 600, 631, 632, 607,
636, 642, 651
ROADSTAR 641, 644, 646
SABA 631, 636, 642, 651
SAISHO 639, 644, 646
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Glossary
12
JPEG
MP3
A standard file format used for still
images. JPEG files are identified by the
file extension “.jpg”.
Analog
audio
Direct representation of sound by an
electrical signal. See also Digital audio.
MP3 (MPEG1 audio layer 3) is a
compressed stereo audio file format.
Files are recognized by their file
extension “.mp3”.
Aspect ratio The width of a TV screen relative to its
height. Conventional TVs are 4:3;
widescreen models are 16:9.
MPEG audio An audio format used on Video CD/
Digital
audio
Indirect representation of sound using
numbers. See also Sampling frequency
and Analog audio.
Super VCDs and some DVD discs.
MPEG video A video format used on Video CD/Super
VCDs and DVD discs.
Dolby
Digital
A multi-channel audio encoding system
developed by Dolby Laboratories that
enables far more audio to be stored on a
disc than PCM encoding. See also PCM
(Pulse Code Modulation).
PBC
(PlayBack
Control)
A system of navigating a Video CD/
Super VCD through on-screen menus
recorded onto the disc.
PCM
Digital audio encoding system found on
DRM copy
protection
DRM (digital rights management) copy
protection is a technology designed to
prevent unauthorized copying by
restricting playback, etc. of material on
devices other than the PC (or other
WMA recording equipment) used to
record it. For detailed information,
please see the instruction manuals or
help files that came with your PC (or
other WMA recording equipment) and/
or software.
(Pulse Code CDs. Good quality, but requires a lot of
Modulation) data compared to Dolby Digital, DTS
and MPEG encoded audio. See also
Digital audio.
Progressive All the lines that make up a video picture
scan video
are updated in one pass (compared to
interlace which takes two passes to
update the whole picture).
Regions
These associate DVD-Video discs and
players with particular areas of the
world. See DVD Video regions on page 58
for more information.
DTS
A multi-channel audio encoding system
developed by Digital Theater Systems
that enables far more audio to be stored
on a disc than PCM encoding. See also
PCM (Pulse Code Modulation).
Sampling
frequency
The rate at which sound is measured to
be turned into digital audio data. The
higher the rate, the better the sound
quality. CD is 44.1 kHz; DVD can be up
to 96 kHz. See also Digital audio.
Dynamic
range
The difference between the quietest and
loudest sounds possible in an audio
signal.
WMA
WMA is short for Windows Media Audio
and refers to an audio compression
technology developed by Microsoft
Corporation. Files are recognized by
their file extension “.wma”.
EXIF
A file format developed by Fuji Photo
(Exchangeabl Film for digital still cameras. Digital
e Image File) cameras from various manufacturers
use this compressed file format which
carries date, time and thumbnail
information, as well as the picture data.
Manufactured under license from Dolby
Laboratories.“Dolby”, “Pro Logic” and the double-
D symbol are trademarks of Dolby Laboratories.
File
extension
A tag added to the end of a filename to
indicate the type of file. For example,
“.mp3” indicates an MP3 file.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
ISO 9660
format
International standard for the volume
and file structure of CD-ROM discs.
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Additional information
Specifications
Accessories (DVD/CD receiver)
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/R6 dry cell batteries. . . . . . . . . . . . . . . . . . . . 2
Video cable (yellow plugs). . . . . . . . . . . . . . . . . . 1
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . 1
FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setup Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
These operating instructions . . . . . . . . . . . . . . . 1
Warranty Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Amplifier section
Continuous Power Output (RMS):
Front, Center, Surround. . 100 W per channel
(1 kHz, 10 % T.H.D., 6 Ω)
Subwoofer . .100 W (100 Hz, 10 % T.H.D., 6 Ω)
Continuous Power Output:
Front, Center, Surround. . . 75 W per channel
(1 kHz, 1 % T.H.D., 6 Ω)
Subwoofer . . . .75 W (100 Hz, 1 % T.H.D., 6 Ω)
Speaker System (S-DV440/740)
(Front speakers x2, surround speakers x2, center
speaker x1, subwoofer x1)
Disc section
Digital audio
characteristics . . . . . . . . . DVD fs: 96 kHz, 24-bit
Type . . . . . . . DVD system, video CD system and
compact disc digital audio system
Total harmonic distortion. . . . . . . . . . . . . 0.004%
Frequency
response . . . .4 Hz to 44 kHz (96kHz sampling) /
4 Hz to 22 kHz (48kHz sampling)
Wow and Flutter . . . . . . . .Limit of measurement
Front speakers (S-DV440
Enclosure . . . . . . . . . .Closed-box bookshelf type
(magnetically shielded)
)
System . . . . . . . . . . . . . . . 10x7 cm 1-way system
Speakers. . . . . . . . . . . . . . . . . 10x7 cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . .90 Hz to 20 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . . 105 (W) x 158 (H) x 83 (D) mm
(
0.001 % W.PEAK) or less (JEITA)
3
1
5
4 /16 (W) x 6 /4 (H) x 3 /16 (D) in.
FM tuner section
Frequency range . . . . . . . . . . . . . 87.5 – 108 MHz
Antenna . . . . . . . . . . . . . . . . . . 75 Ω, unbalanced
Weight . . . . . . . . . . . . . . . . . . . 0.8 kg / 1 lb. 13 oz
Front speakers (S-DV740)
Enclosure . . . . . . . . . .Closed-box bookshelf type
(magnetically shielded)
AM tuner section
Frequency range
With 9kHz step . . . . . . . . 531 kHz to 1,602 kHz
With 10kHz step . . . . . . . 530 kHz to 1,700 kHz
Antenna . . . . . . . . . . . . . . . . . . . . . .Loop antenna
System . . . . . . . . . . . . . . . . . . . . . . .2-way system
Woofer . . . . . . . . . . . . . . . . . . .10x7cm cone-type
Tweeter . . . . . . . . . . . . . . . . . . . 2.6cm dome-type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . .90 Hz to 20 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . 240 (W) x 962 (H) x 240 (D) mm
Miscellaneous
Power requirements. . . . . . . . . . AC 120 V, 60 Hz
Power consumption . . . . . . . . . . . . . . . . . . .175W
Power consumption in standby. . . . . . . . . .0.5 W
Dimensions . . . . . 420 (W) x 70 (H) x 396 (D) mm
1
7
1
9 /2 (W) x 37 /8 (H) x 9 /2 (D) in.
Weight . . . . . . . . . . . . . . . . . . . 3.6 kg / 7 lb. 16 oz
9
13
5
16 /16 (W) x 2 /16 (H) x 15 /8 (D) in.
Weight . . . . . . . . . . . . . . . . . . . . 7.0 kg / 15 lb. 7 oz
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
12
Center speaker
Enclosure . . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
Note
• Specifications and design subject to
possible modification without notice, due
to improvements.
System . . . . . . . . . . . . . . . 10x7 cm 1-way system
Speakers. . . . . . . . . . . . . . . . . 10x7 cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . . 78 Hz to 20 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . . . 240 (W) x 87 (H) x 79 (D) mm
This product includes FontAvenue®
fonts licenced by NEC corporation.
FontAvenue is a registered trademark
of NEC Corporation.
1
7
1
9 /2 (W) x 3 /16 (H) x 3 /8 (D) in.
Weight . . . . . . . . . . . . . . . . . . 0.85 kg / 1 lb. 14 oz
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is
Surround speakers
Enclosure . . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . . . 7cm 1-way system
Speakers. . . . . . . . . . . . . . . . . . . . 7cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . . 90 Hz to 20 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . . 105 (W) x 139 (H) x 83 (D) mm
intended for home and other limited uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
3
1
5
4 /16 (W) x 5 /2 (H) x 3 /16 (D) in.
Weight . . . . . . . . . . . . . . . . . . . 0.55 kg / 1 lb. 4 oz
engineering or disassembly is prohibited.
Subwoofer
Enclosure . . . . . . . . . . . . . . Bass-reflex floor type
System . . . . . . . . . . . . . . . . . 16 cm 1-way system
Speaker. . . . . . . . . . . . . . . . . . . . 16 cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . 35 Hz to 2.8 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . 108 (W) x 420 (H) x 390 (D) mm
This product is intended for household
purposes. Any failure due to use for other
than household purposes (such as long-
term use for business purposes in a
restaurant or use in a car or ship) and
which requires repair will be charged for
even in the warranty period.
KO41_En
5
9
3
4 /16 (W) x 16 /16 (H) x 15 /8 (D) in.
Weight . . . . . . . . . . . . . . . . . . . . 5 kg / 11 lb. 1 oz
Accessories (Speaker system)
Speaker cables. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Speaker setup guide . . . . . . . . . . . . . . . . . . . . . . 1
Non-slip pads (small) . . . . . . . . . . . . . . . . . . . . 20
Non-slip pads (large). . . . . . . . . . . . . . . . . . . . . . 9
Subwoofer stands . . . . . . . . . . . . . . . . . . . . . . . . 3
Front speaker covers . . . . . . . . . . . . . . . . . . . . . . 2
Surround speaker bases. . . . . . . . . . . . . . . . . . . 2
S-DV440 only:
Wall mounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Additional information
Wall-mounting the front (S-DV440
only), center and surround speaker
system
Front surround 3-spot setup
(S-DV440 only)
5 mm
Before mounting
• Remember that the speaker system is
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in the
speaker falling. Make sure that the wall you
intend to mount the speakers on is strong
enough to support them. Do not mount on
plywood or soft surface walls.
Wood screw
5 – 7 mm
• Mounting screws are not supplied. Use
screws that are suitable for the wall
material and that will support the weight of
the speaker.
Note
• If you are unsure of the qualities and
strength of the walls, consult a
professional for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation.
Standard surround 5-spot setup
Front speaker (S-DV440 only)
5 mm
10 mm
Wood screw
5 – 7 mm
Surround speaker
5 mm
10 mm
Wood screw
5 – 7 mm
72
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
12
73
En
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
<04C000001>
Printed in
<XRB3037-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|