6-Disc Multi-DVD Player
ENGLISH
Owner’s Manual
XDV-P90
This product conforms to nCeEwMcAocrdorcdocloorlso.rs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important
The serial number of this device is located on the bottom of this product. For your own secu-
rity and convenience, be sure to record this number on the enclosed warranty card.
Precaution
CAUTION: USE OF CONTROL OR ADJUSTMENT OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH
THIS PRODUCT WILL INCREASE EYE HAZARD.
Information to User
Alteration or modifications carried out without appropriate authorization may invali-
date the user’s right to operate the equipment.
After-sales Service for Pioneer Products
Please contact the dealer or distributor from where you purchased the product for its
after-sales service (including warranty conditions) or any other information. In case the
necessary information is not available, please contact the companies listed below:
Please do not ship your product to the companies at the addresses listed below for
repair without advance contact.
7 CANADA
7 U.S.A.
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION
DEPARTMENT
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT
DIVISION
300 Allstate Parkway
P.O. Box 1760
Markham, Ontario L3R OP2
(905) 479-4411
Long Beach, CA 90801-1760
800-421-1404
1-877-283-5901
For warranty information please see the Limited Warranty sheet included with your product.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Be sure to read this.
Disc (DVD/Video CD/CD) Playback ........ 19
Chapter and Track Advance/Return ............ 20
-
Discs Compatible with this Product ............ 9
-
Skipping to the Next Chapter/Track
-
Before Using .......................................... 3
Before Using This Product .......................... 3
Chapter/Track
Specifying Title/Chapter/Track
(Direct Search) .................................... 21
-
About This Product
About This Manual
How to Use This Manual
Precaution
Preventing the Battery from
-
Specifying Chapter
Specifying Track
-
-
-
-
-
Disc Fast Forward/Reverse ........................ 22
-
Fast Reverse
Becoming Exhausted
Changing the Mode Switch Setting
Condition Memory
Resetting the Microprocessor
-
-
Changing Discs .......................................... 23
-
-
Using the Remote Controller ........................ 8
Playback Variations ............................ 24
Still, Frame-by-Frame and
-
Battery
Slow Motion Playback ........................ 24
Still Playback
Frame-by-Frame Playback
Slow Motion Playback
Discs Compatible with this Product ............ 9
-
-
Features of This Player
Disc Organization
-
-
-
-
Changing Audio Language
during Playback (Multi-Audio) .......... 26
Care of Discs and Magazines .................... 13
-
Precaution
during Playback .................................. 26
Changing the Subtitle Language
Changing the Viewing Angle
Loading Discs ............................................ 14
-
Loading Discs
-
-
Removing the Magazine
Basic Operations ................................ 17
Operating with
Calling up Information Displays ................ 29
Operating with the Information
Switching Power ON/OFF .......................... 17
-
-
Switching Power OFF
Display 1 of a DVD ............................ 30
Searching for a Desired Scene,
-
Specified Time
Selecting Audio, Subtitle and Angle
-
Operating with the Information
Display 2 of a DVD ............................ 32
Selecting Repeat Range
Selecting the Picture Mode
-
-
-
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Information
Others .................................................... 51
Mode Switch ........................................ 51
Switching the Remote Control Code
Operating with the Head Unit .................... 53
Display 1 of a Video CD .................... 33
Searching for a Desired Scene,
-
Specified Time
Selecting Repeat Range
-
-
Selecting Audio Output
-
Operating with the Information
If You Forget Your Code Number .............. 59
Display 2 of a Video CD .................... 36
Selecting the Picture Mode
-
-
Operating with the Information
Display 1 of a CD ................................ 37
Searching for a Desired Track
Setting Random Play
-
-
Installation ............................................ 63
Connecting the Units .................................. 63
-
-
Setting Scan Play
-
Connecting the Power Cord
Connection Diagram
Operating with the Information
-
Switching Discs
Installation .................................................. 72
-
Installing the DVD Player Unit
Changing Initial Settings .................... 40
Calling up the SET UP MENU .................. 40
Setting the Subtitle
-
(SUBTITLE LANG.) .......................... 41
Subtitles ON/OFF
Setting the Subtitle Language
Index .......................................................... 77
-
(AUDIO LANG.) ................................ 43
Setting the Menu Language
(MENU LANG.) .................................. 44
-
Setting the Code Number and Level
Changing the Level
-
Setting for Digital Output
Setting Digital and Analog Audio Output
Setting Angle Selection Mark Display
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Before Using This Product
About This Product
CAUTION
This product does not automatically change discs. To change a disc, follow the instruc-
tions on page 23.
Video System of a Connected Component
This product is NTSC system compatible. When connecting other components to this
product, be sure components are compatible with the same video systems. If it is not,
images will not be correctly reproduced.
About This Manual
We recommend that you familiarize yourself with the functions and their operation by read-
ing through the manual before you use this product. It is especially important that you read
and observe the “Precaution”.
How to Use This Manual
This manual is divided into the sections shown below.
Before Using:
Explanations of operations you should perform before
using this product.
Basic Operations:
Explanations of basic audio, video and other operations.
Explanations of how to enjoy various playback modes.
Playback Variations:
Operating with Information Explanations of how to operate this product using
Displays:
Information Displays.
Changing Initial Settings:
Explanations of how to use this product’s SET UP
MENU.
There is an index at the edge of each page in this manual.
Each section’s heading is printed vertically at the top of the left hand page. Each section’s
heading is also printed vertically at the edge of the right hand page, together with indications
of the discs the explanations apply to.
Please use these handy headings and indications when searching for information.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
To Ensure Safe Driving
WARNING
• To avoid the risk of accident and the potential violation of applicable laws, this
product is not for use with a video screen that is visible to the driver.
• In some countries or states the viewing of images on a display inside a vehicle
even by persons other than the driver may be illegal. Where such regulations apply,
they must be obeyed.
This product detects whether your car’s parking brake is engaged or not, and prevents you
from watching a DVD or Video CD on the display connected to Front Video Output while
driving.
Example: When you attempt to watch a DVD (the screen is black.)
When you park your car in a safe place and apply the parking brake, the picture appears on
the screen.
When Using a Display connected to Rear Video Output
This product’s Rear video output is for connection of a display to enable passengers in the
Rear seats to watch the DVD or Video CD.
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD
or Video CD while Driving.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Precaution
• Keep this manual handy as a reference for operating procedures and precautions.
• Always keep the volume low enough for outside sounds to be audible.
• Protect the product from moisture.
• If the battery is disconnected, the preset memory will be erased and must be repro-
grammed.
Preventing the Battery from Becoming Exhausted
When using this product, be sure your car engine is running. If you use this product when
your engine is not running, the battery will become exhausted.
Changing the Mode Switch Setting
Use a pen tip or other pointed instrument to select the correct setting of the Mode switch on
the rear of this unit for the component you are using it with. After changing the setting, be
sure to press the RESET button. (See page 6.)
(1) When using this product with a Pioneer compo-
STAND
ALONE
nent featuring an IP-BUS input
• Select the IP-BUS mode.
IP-BUS
(2) When using this product with a Pioneer compo-
nent that does not feature an IP-BUS input, or
another company’s product
• Select the STAND ALONE mode.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition Memory
This function memorizes audio language, subtitle language and picture mode settings made
during disc playback for up to 30 discs. Without any special operations, the final setting
details during playback of a disc are memorized. The next time a disc is played, the previous
settings are automatically applied.
Note:
•
With some discs, audio language and subtitle language are automatically specified, in which
case condition memory does not function.
•
When the number of discs exceeds 30, settings for the latest disc replace those for the least
recent disc.
Resetting the Microprocessor
Pressing the RESET button lets you reset the microprocessor to its initial settings without
changing SET UP MENU settings, Condition Memory and other memory settings.
Press the RESET button in the following cases.
• After changing the setting of the Mode switch on the rear of the unit.
• When this unit fails to operate correctly.
• When strange (incorrect) messages appear on the display.
Resetting
Turn the ignition switch OFF.
1
2
Press the RESET button.
Use a pen tip or other pointed instrument.
Note:
•
After completing connections or when you want to erase all memorized settings or return the
unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC
ON before pressing the RESET button.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Finder
The remote control (CD-R7) is sold separately.
• You can also operate this product with the remote controller supplied with an AV
receiver (e.g. AVH-P6400CD), but you cannot change discs.
w
e
r
t
y
!
!
!
!
!
!
!
!
q
u
i
@
@
@
@
@
o
!
!
q Remote control code
selection switch (For
details, see page 52.)
w TOP MENU button
e MENU button
r AUDIO button
t SUBTITLE button
y ANGLE button
u REVERSE (1) button
i PLAY/PAUSE (6)
button
! OPEN/CLOSE (0)
button
! RGB button
@ STOP (7) button
@ NEXT (¢) button
@ WIDE button
@ DISC UP/DOWN buttons
@ CLEAR button
! Number buttons
! RETURN button
! POWER button
! DISPLAY button
! Joystick
! STEP (e)/(E)
buttons
! Remote control operation
mode switch (For details,
see page 51.)
o PREVIOUS (4)
button
! FORWARD (¡) button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Controller
This product is equipped with a remote controller for convenient operation.
• Point the controller in the direction of the unit or remote sensor to operate.
Precaution:
•
•
•
Do not store the remote controller in high temperatures or direct sunlight.
The controller may not function properly in direct sunlight.
Do not let the remote controller fall onto the floor, where it may become jammed under the
brake or accelerator pedal.
Battery
• Slide the tray out on the back of the remote controller and insert the bat-
tery with the (+) and (–) poles pointing in the proper direction.
Note:
• When using for the first time, pull out the film protruding from the tray.
Replacing the Lithium Battery:
•
Use only lithium battery “CR2025”, 3 V.
Precaution:
•
•
Remove the battery if the remote controller is not used for a month or longer.
If the event of battery leakage, wipe the remote controller completely clean and install a new bat-
tery.
WARNING:
• Keep the lithium battery out of reach of children. Should the battery be swallowed,
immediately consult a doctor.
CAUTION:
• Do not recharge, disassemble, heat or dispose of battery in a fire.
• Use a CR2025 (3 V) lithium battery only. Never use other types of battery with this
unit.
• Do not handle the battery with metallic tools.
• Do not store the lithium battery with metallic materials.
• When disposing of used batteries, please comply with governmental regulations or
environmental public institution’s rules that apply in your country/area.
• Always check carefully that you are loading the battery with its (+) and (–) poles
facing in the proper directions.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs Compatible with this Product
Features of This Player
Compatible with DVD, Video CD and CD Formats
DVD, Video CD and CD discs that display the logos shown below can be played
back on this player.
DVD VIDEO
VIDEO CD
CD
The disc format logos shown above are found on disc labels or on disc jackets.
Note:
•
•
•
With some DVD-Video discs, you may not be able to use certain functions.
Playback of some DVD-Video discs may not be possible.
With DVD-R/DVD-RW discs, only recordings made in the Video format (Video mode) can
be played back. DVD-RW discs recorded in the Video Recording format (VR mode) cannot
be played back.
•
Even with DVD-R/DVD-RW discs featuring recordings made in the Video format (Video mode),
playback may not be possible with this product due to disc characteristics or scratches or dirt on
the disc. Dirt or condensation on the lens inside this product may also prevent playback.
Playback of CD-R/RW and DVD-R/RW discs that have not been finalized is not possible.
Playback of discs recorded with a PC using the correct format is possible, but depending on
the application software settings, environment and other factors, playback may not be possible.
(For details, inquire at the store or dealer’s where you purchased the application software.)
Playback of CD-TEXT discs is possible, but display of titles and other information is not pos-
sible.
•
•
•
•
CD-Extra discs can be played back as music CDs.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Precaution:
•
•
•
Playback of DVD-Audio, DVD-R and CD-ROM discs is not possible. This player can only
playback discs bearing the marks shown on page 9.
Use the optional 8 cm (3 in.) disc tray to play 8 cm (3 in.) discs. Never use a commercially
available 8 cm (3 in.) adapter as this will damage the player.
DVDs that have incompatible region numbers (see page 62) cannot be played on this
player. The region number of the player can be found on the rear panel.
The illustration below shows the regions and corresponding region numbers.
•
•
Normal playback of CD-R discs other than those recorded with a music CD recorder may not
be possible.
Playback of music CD-R discs, even those recorded with a music CD recorder, may not be
possible with this product due to disc characteristics or scratches or dirt on the disc. Dirt or
condensation on the lens inside this product may also prevent playback.
Titles and other text information recorded on a CD-R disc may not be displayed by this prod-
uct.
•
•
Read the precautions with the CD-R discs before using.
What the Marks on DVDs Indicate
The marks below can be found on DVD disc labels and packages. They indicate the type of
images and audio recorded on the disc, and the functions you can use.
Mark
Meaning
2
Indicates the number of audio systems.
2
Indicates the number of subtitle languages.
Indicates the number of viewing angles.
3
Indicates the picture size (aspect ratio: screen width-to-height ratio) type.
16 : 9 LB
1
Indicates the number of the region where playback is possible.
ALL
7 Disc Operation
With some DVDs, depending on the intentions of the disc’s producer, certain operations
may be prohibited. Also, with discs enabling menu operation and two-way operation dur-
ing playback, the way titles and chapters are organized may prevent certain operations
such as Repeat play.
If this happens with this player, the prohibited mark “
The prohibited mark “ ” may not appear on some discs.
is displayed.
”
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Organization
DVD
On DVD-Video discs, the contents are divided into titles which are in turn divided
into chapters.
With video material, a single work (movie etc.) usually corresponds to a single title,
with different scenes corresponding to separate chapters. With karaoke discs, one
song corresponds to one title.
However, some discs are not organized like this, so bear this in mind when using the
Search function.
Title 1
Chapter 1 Chapter 2
Title 2
Chapter 1 Chapter 2
DVD
Video CD and CD
On CDs and Video CDs, the contents are divided into tracks. One track usually corre-
sponds to one song. On some discs, tracks may also feature an index.
With Video CDs featuring PBC (Playback Control), you can use a menu to perform
playback operations. It may not be possible to use functions such as Repeat and
Search.
Track 1
Track 2
Track 3
Track 4
Track 5
CD
Track 1
Track 2
Track 3
Track 4
Video CD
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Features of This Product
You can play back DVDs, Video CDs (PBC compatibility) and CDs.
Repeat Play
You can enjoy different kinds of repeat play.
Still Image &
Frame-By-Frame Playback
You can view still images or playback of one frame at a
time.
Slow Motion Playback
Multi-Aspect
Slow motion playback is possible.
Switching between Wide screen, Letter box and Panscan
display is possible.
Cinema/Animation/Standard
Mode Switching
You can switch among these three modes for the best pic-
ture quality when watching a movie or an animation
movie.
Multi-Audio
Multi-Subtitle
Multi-Angle
You can switch between multiple audio systems recorded
on a DVD as desired.
You can switch between multiple subtitle languages
recorded on a DVD as desired.
You can switch between multiple viewing angles of a
scene recorded on a DVD as desired.
Video CDs featuring PBC
Compatibility
You can play back Video CDs featuring PBC (Playback
Control).
Parental Lock
You can use this to prevent your children viewing violent
or adult oriented scenes.
Dolby* Digital/DTS**
When using this product with a Pioneer Multi-Channel
AV Master Unit, you can enjoy the atmosphere and
excitement provided by DVD movie and music software
featuring 5.1 channel recordings.
Compatibility (When combin-
ing the product with a Pioneer
Multi-Channel AV Master Unit
such as the AVM-P9000R)
1
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
**“DTS” is a registered trademark of Digital Theater Systems, Inc.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Care of Discs and Magazines
Precaution
• This product is designed for use with conven-
tional, fully circular discs only. Use of shaped
discs are not recommended for this product.
• Check all discs before playing and discard cracked, scratched or warped discs.
• Wipe dirty or damp discs outward from the cen-
ter with a soft cloth.
• Avoid touching the recorded (iridescent) surface when han-
dling discs.
• Store discs in their cases when not in use.
• Keep discs out of direct sunlight and high temperatures.
• Do not affix labels or apply chemicals to discs.
• Condensation may collect inside the player when using the heater in cold weather,
interfering with playback. Turn it off for an hour or so and wipe damp discs with a
soft cloth.
• Road shocks may interrupt disc playback.
• Be sure to use DVD compatible magazines and trays with this product.
• If you need more magazines, please ask your nearest dealer for magazine JD-612V.
• Do not put the magazine in a place where it will be exposed to high temperatures
or direct sunlight.
• Do not disassemble the magazine.
• Take care not to drop the magazine or knock it against anything.
• Do not use cracked or warped trays.
• Never insert anything other than discs. Do not attach a label or tape to a disc.
• The use of benzine, thinner, insecticide, or other volatile chemicals may damage
the magazine surface.
• Attach the supplied label in the specified position. Attaching the label in an incor-
rect place or attaching more than one label will cause malfunction.
Label
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Discs
Loading discs in the magazine and loading the magazine in the unit.
Loading Discs
You can load up to six discs in the magazine. Refer to page 9 to confirm the type of disc you
can use with this unit.
LOCK button
While pressing the LOCK button, pull out the tray.
1
2
Load a disc.
Load with the recorded side (the iridescent side) facing down.
With double-sided discs, load with the side you want to watch facing down.
Replace the tray.
3
When Using 8 cm (3 in.) Discs
Do not use an 8 cm (3 in.) disc adapter. If it is used, the player may fail. To load an 8 cm
(3 in.) disc, you need a special 8 cm (3 in.) disc tray (Part No. CXB5931). Ask your Pioneer
Service Center about it.
8 cm disc
Black and white levers
12 cm disc
8 cm disc tray
tray
While pressing the LOCK button, pull out the tray.
Gently pull out the tray to the left to remove it.
Align the tray with the grooves on the left and right, and push in until you hear a
click.
1
2
3
Secure the disc with the black and white levers.
Replace the tray.
4
5
•
•
Be sure to remove the disc before changing a disc tray.
If the tray is not aligned with the right and left grooves, it cannot be pushed to the end. Do not
bend or force the tray.
•
Always load 6 trays in a magazine to prevent loss or warping of trays.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the Magazine
Load in the direction
indicated by the arrow.
Slide the OPEN lever to the right.
The front door opens.
1
Load the magazine in the direction indicated by the arrow.
Close the front door.
2
3
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Magazine
EJECT button
Slide the OPEN lever to the right.
The front door opens.
1
Press the EJECT button.
Remove the magazine.
Close the front door.
2
3
4
•
•
Do not put your fingers in the magazine tray as this may lead to incorrect operation and damage
to the player.
If the label on the magazine is coming off or wrinkled up, it may damage the eject mechanism,
and in some cases, the magazine may not be ejected. Therefore, remove a damaged label com-
pletely before use.
•
Be sure the front door is closed except when loading or removing a magazine. Playback is not
possible if the front door is left open. Dust or dirt entering the magazine may result in damage to
the unit.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Switching Power ON/OFF
Switching Power ON
When Using the IP-BUS Mode
Switch the display image source to this product.
For details, refer to the connected unit’s manual.
1
Press the SOURCE button on the Head Unit.
Press repeatedly until DVD is selected, and the disc starts playing.
2
When Using the STAND ALONE Mode
Operate after confirming the Operation mode switch is set to DVD. (See page 7.)
Switch the display image source to this product.
For details, refer to the connected unit’s manual.
1
Press the POWER button.
Power to this product switches ON and a disc starts play-
ing. The remote sensor indicator lights.
2
Note:
•
•
When you have reloaded the magazine, playback starts from the first disc.
If you were previously playing a DVD, playback of that disc resumes from where you left
off.
•
•
•
If power to this product is switched ON/OFF with the POWER button, playback does not
resume from where you left off.
Playback cannot resume from where you left off until information on all of the discs has been
read.
With some discs, a menu may be displayed. (See page 19.)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Power OFF
VD
When Using the IP-BUS Mode
ideo
V
Press the SOURCE button for 1 second on the Head Unit.
VCD
When Using the STAND ALONE Mode
CD
Press the POWER button.
Power to this product switches OFF. The remote sensor indicator
goes out.
When using a rear display in the IP-BUS Mode
• Even if the source selected with the head unit is not DVD, if you switch power to this
product ON with the POWER button, you can watch the DVD picture from this product
on the rear display.
• Regardless of whether the head unit is switched ON/OFF, you can switch power to this
product ON/OFF.
Precautions concerning the IP-BUS Mode
• When you have switched power to this product ON by pressing the POWER button, be
sure not to forget to switch power to this product OFF. If you switch power to this prod-
uct OFF after switching to DVD video display, the display shows that power to this
product has been switched OFF.
• When you eject a source disc (CD or MD) selected with the head unit, power to the
head unit switches OFF. Depending on the connection method, the picture on the rear
display may disappear.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc (DVD/Video CD/CD) Playback
Press the PLAY/PAUSE (6) button.
The playback mark ( ) is displayed for 4 seconds and the disc
starts playing.
Note:
•
•
Pressing the PLAY/PAUSE (6) button when a disc is playing, pauses playback.
If the last disc played was a DVD, playback starts from the point on that disc where you
stopped play previously. With some discs, a menu may be displayed and playback may not be
possible from where you left off previously.
Working with the Menu Screen
When DVDs offering menu or Video CDs featuring the PBC (Playback Control) function
start playing, a menu is displayed.
With DVDs
Use the joystick to select the desired
MENU option.
1
Click the joystick.
2
Playback starts from the selected menu option.
7 To Display the Menu
You can display the menu by pressing the MENU button or TOP MENU button while a
disc is playing. Pressing either of these buttons again lets you start playback from the
location selected from the menu. For details, refer to the instructions provided with the
disc.
Note:
•
The way to display the menu differs depending on the disc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
With Video CDs
VD
Press the number buttons to select a desired
menu option.
Playback starts from the selected menu option.
Operation with the joystick is not possible.
ideo
V
VCD
CD
7 To Display the Menu
You can display the menu by pressing the RETURN button while PBC playback. For
details, refer to the instructions provided with the disc.
Note:
•
When menu are two or more pages long, press the PREVIOUS (4)/NEXT (¢) button to
switch between displays.
•
To play a disc without using a menu (without PBC playback), when the disc is stopped press
the appropriate number button to select the desired track. To return to PBC playback, stop
playback and press the PLAY/PAUSE (6) button.
Chapter and Track Advance/Return
Skipping to the Next Chapter/Track
During play, press the NEXT (¢) button.
Chapter/track numbers are displayed for 4 seconds and you
advance to the next chapter/track.
Returning to the Previous Chapter/Track
During play, press the PREVIOUS (4) but-
ton.
Chapter/track numbers are displayed for 4 seconds and you return
to the beginning of the current chapter/track.
Press the PREVIOUS (4) button twice in succession takes you
to the beginning of the chapter/track before the current chapter/track.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying Title/Chapter/Track (Direct Search)
Specifying Title
Press the number button corresponding to a
desired title number when the disc is stopped.
Title number is displayed for 4 seconds and playback starts from
the selected title.
To select 3, press button 3.
To select 10, press buttons 10 and 0 in order.
To select 23, press buttons 10, 10 and 3 in order.
Specifying Chapter
Press the number button corresponding to a
desired chapter number during playback.
Chapter number is displayed for 4 seconds and playback starts
from the selected chapter.
To select 3, press button 3.
To select 10, press buttons 10 and 0 in order.
To select 23, press buttons 10, 10 and 3 in order.
Specifying Track
Press the number button corresponding to a
desired track number.
Track number is displayed for 4 seconds and playback starts from
the selected track.
To select 3, press button 3.
To select 10, press buttons 10 and 0 in order.
To select 23, press buttons 10, 10 and 3 in order.
Note:
•
With some discs, the prohibited mark “ ” may be displayed and operation may not be pos-
sible.
•
With Video CD, Direct Search is not possible during PBC playback.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Fast Forward/Reverse
Fast Forward
VD
ideo
V
VCD
During play, continue pressing the FOR-
1
2
WARD (¡) button.
CD
The fast forward mark (
) is displayed while pressing
the button and disc fast forward is performed.
Release the FORWARD (¡) button at the point you want
to watch/listen.
Playback resumes from that point.
Note:
•
If you continue pressing the FORWARD (¡) button for 5 seconds, the color of the fast for-
ward mark (
) changes from blue to yellow. When this happens, fast forward continues
even if you release the FORWARD (¡) button. To resume playback at a desired point, press
the PLAY/PAUSE (6) button.
•
•
If you fast forward to the end of a CD, fast forward continues from the beginning of the disc.
Fast forward may not be possible at certain locations on some discs. If this happens, normal
playback automatically resumes.
Fast Reverse
During play, continue pressing the
REVERSE (1) button.
1
The fast reverse mark (
) is displayed while pressing
the button and disc fast reverse is performed.
Release the REVERSE (1) button at the point you want to
watch/listen.
2
Playback resumes from that point.
Note:
•
If you continue pressing the REVERSE (1) button for 5 seconds, the color of the fast
reverse mark (
) changes from blue to yellow. When this happens, fast reverse continues
even if you release the REVERSE (1) button. To resume playback at a desired point, press
the PLAY/PAUSE (6) button.
•
•
If you fast reverse to the beginning of a CD, normal playback resumes.
Fast reverse may not be possible at certain locations on some discs. If this happens, normal
playback automatically resumes.
22
Continued overleaf
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Discs
Press the DISC UP/DOWN buttons.
Disc numbers are displayed for 4 seconds and the previous or
next disc in the magazine is selected. Repeat the operation to
select the desired disc.
Note:
•
•
Empty disc trays are skipped during disc selection.
After a desired disc is selected, it automatically starts playing.
Stopping Playback
Press the STOP (7) button.
Note:
•
When you stop DVD or Video CD playback (during PBC playback only) by pressing the
STOP (7) button, that location on the disc is memorized enabling playback from that point
when you play the disc again.
•
The playback stop point on a disc is erased from memory if you change the disc, remove the
magazine or switch power to this product ON/OFF with the POWER button.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Variations
Still, Frame-by-Frame and Slow Motion Playback
VD
Still Playback
This lets you pause playback and view a still picture.
ideo
V
VCD
Press the PLAY/PAUSE (6) button during
playback.
The still mark ( ) is displayed for 4 seconds and playback is
paused letting you view a still image.
CD
•
To return to normal playback, press the PLAY/PAUSE (6) button once more.
Frame-by-Frame Playback
This lets you move ahead or back one frame at a time during playback. Reverse Frame-by-
Frame playback is not possible with Video CDs.
Press the STEP (E) or STEP (e) button.
Each time you press the STEP (E) button, you move ahead one
frame.
Each time you press the STEP (e) button, you move back a
number of frames.
•
To return to normal playback, press the PLAY/PAUSE (6) button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Slow Motion Playback
This lets you slow down playback speed. Reverse Slow Motion playback is not possible with
Video CDs.
Press the STEP (e) or STEP (E) button
for 1 second during playback.
The slow playback mark (
) or (
) is displayed, forward or
reverse Slow Motion playback begins.
•
•
To return to normal playback, press the PLAY/PAUSE (6) button.
During forward Slow Motion playback, you can adjust playback speed by pressing the STEP
(E) or STEP (e) button. Each time you press it the speed changes in 4 steps in the fol-
lowing order:
1/16 Ô 1/8 Ô 1/4 Ô 1/2
Note:
•
•
There is no sound during Still, Frame-by-Frame or Slow Motion playback.
Depending on the disc and the playback location on the disc, the prohibited mark “ ” may
be displayed indicating that Still, Frame-by-Frame and Slow Motion playback are not possi-
ble.
•
With some discs, images may be unclear during Frame-by-Frame and Slow Motion playback.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Audio Language during Playback (Multi-Audio)
VD
DVDs can provide audio playback with different languages and different systems (Dolby
Digital, DTS etc.). With DVDs featuring multi-audio recordings, you can switch between lan-
guages/audio systems during playback.
ideo
V
VCD
Press the AUDIO button during play-
1
back.
The audio selection mark (
) is displayed.
Press the AUDIO button while the audio selection mark is
displayed.
2
The audio changes each time you press the AUDIO button.
Note:
•
•
This function only operates with DVDs featuring multi-audio recordings.
2
The number in the “
” mark on a DVD’s package indicates the number of recorded lan-
guages/audio systems.
•
•
•
•
•
With some DVDs, switching between languages/audio systems may only be possible using a
menu display.
You can also switch between languages/audio systems using the SET UP MENU. For details,
refer to “Setting the Audio Language” on page 43.
Only digital output of DTS audio is possible. If this product’s optical digital outputs are not
connected, DTS audio will not be output, so select an audio setting other than DTS.
While the audio selection mark is displayed, you can also switch to a desired audio language
number using the number buttons.
Display indications such as “Dolby D” and “5.1ch” indicate the audio system recorded on the
DVD. Depending on the setting, playback may not be with the same audio system as that
indicated.
Changing Audio Output during Playback
You can switch between stereo and monaural output.
Press the AUDIO button during play-
1
2
back.
The audio output selection mark (
) is displayed.
Press the AUDIO button while the audio output selection
mark is displayed.
The audio output setting changes each time you press the AUDIO button in the fol-
lowing order:
L+R (Stereo) = L (Left) = R (Right) = L+R (Stereo)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Subtitle Language during Playback (Multi-Subtitle)
With DVDs featuring multi-subtitle recordings, you can switch between subtitle languages
during playback.
Press the SUBTITLE button during play-
1
back.
The subtitle selection mark (
) is displayed.
Press the SUBTITLE button while the subtitle selection
mark is displayed.
2
The subtitle language changes each time you press the SUBTITLE button.
Note:
•
•
This function only operates with DVDs featuring multi-subtitle recordings.
2
The number in the “
” mark on a DVD’s package indicates the number of recorded subti-
tle languages.
•
•
•
With some DVDs, switching between subtitle languages may only be possible using a menu
display.
You can also switch between subtitle languages using the SET UP MENU. For details, refer
to “Setting the Subtitle” on page 41.
While the subtitle selection mark is displayed, you can also switch to a desired subtitle lan-
guage number using the number buttons. At this time, you can also switch subtitle display
OFF by pressing the CLEAR button.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Viewing Angle during Playback (Multi-Angle)
VD
With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can
switch among viewing angles during playback.
7 About Scenes that Let You Change the Viewing Angle
During playback of a scene shot from multiple angles on this product, the angle selection
mark (
) is displayed in the bottom right of the screen.
Switch angle selection mark display ON/OFF using the SET UP MENU. For details, refer
to “Setting Angle Selection Mark Display” on page 50.
Press the ANGLE button during play-
back of a scene shot from multiple
angles.
1
The angle selection mark (
are displayed.
) and angle number (
)
Press the ANGLE button while the angle selection mark and
angle number are displayed.
2
The angle changes each time you press the ANGLE button.
Note:
•
•
This function only operates with DVDs featuring multi-angle recordings.
3
The
“
” mark on a DVD’s package indicates it features multi-angle scenes. The number in
” mark indicates the number of angles from which scenes were shot.
3
the “
•
•
You cannot switch angles during Slow Motion playback.
If you press the ANGLE button during fast forward/fast reverse or pause, fast forward/fast
reverse or pause is canceled and normal playback resumes but the viewing angle does not
change.
•
While the angle selection mark and angle number are displayed, you can also switch to a
desired angle number using the number buttons.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with Information Displays
Calling up Information Displays
Information displays let you easily perform a wide range of disc operations. These include
starting playback from a specified title, chapter or time, selecting the picture mode, setting
the range of Repeat play, changing discs, and switching between different audio and subtitle
settings.
Press the DISPLAY button.
Each time you press the button the dis-
play changes as follows:
1
Information display 1 = Information
display 2 = Display OFF =
Information display 1
Information display 1 (e.g. DVD)
Information display 2 (e.g. DVD)
Note:
•
•
For CDs there is no Display OFF setting.
You can perform disc switching as well as title, chapter and time settings with either the
information display 1 or 2.
This manual explains how to use the information display 2 to display all the discs loaded in
the magazine for disc switching, and how to use the information display 1 to perform title,
chapter and time settings.
•
Pressing the DISPLAY button during fast forward/reverse returns you to normal playback.
7 Concerning Information Display 2
When information cannot be read directly after loading a magazine or at some other time,
indications of the type of disc that cannot be read are not displayed.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Information Display 1 of a DVD
VD
This display lets you switch discs for playback, use the Search function to specify a title or
chapter to search for a desired scene, use the Time Search function to specify a time to
search for a desired scene, select the desired audio and subtitle language, and select the
angle.
ideo
V
VCD
•
Displaying all the discs loaded in the magazine for disc selection is explained using the informa-
tion display 2.
CD
Searching for a Desired Scene, Starting Playback from a Specified Time
You can use the Search function to search for a desired scene by specifying a title or chapter,
and the Time Search function to specify the time on a disc at which play starts.
Move the joystick left/right to select a
desired option.
1
The selected option is indicated in blue.
Title Chapter Time
Press the number buttons to input the
2
desired number.
For Titles and Chapters
To select 3, press button 3.
To select 10, press buttons 1 and 0 in order.
To select 23, press buttons 2 and 3 in order.
•
To jump 10 titles or chapters ahead of the selected one, press the 10 button.
For Time (Time Search)
To select 21 minutes 43 seconds, press buttons 2, 1, 4 and 3 in order.
To select 1 hour 11 minutes, convert the time into 71 minutes 00 seconds and press buttons
7, 1, 0 and 0 in order.
•
To jump 10 seconds ahead of the selected time, press the 10 button.
Note:
•
•
Pressing the CLEAR button cancels the input number.
You can also select titles and chapters by moving the joystick up/down.
While the input number is displayed, click the joystick.
This starts playback from the selected scene.
3
Note:
•
•
•
With discs featuring a menu, you can also press the MENU button or TOP MENU button and
then make selections from the displayed menu.
With some discs, the prohibited mark “ ” may be displayed, indicating that titles, chapters
and time cannot be specified.
Chapter Search and Time Search are not possible when disc playback has been stopped.
7 Direct Search
Even without using an information display you can start playback from a specified title or
chapter. For details, see page 21.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Audio, Subtitle and Angle
You can perform Audio (language, stereo, audio type as Dolby Digital etc.), Subtitle lan-
guage and Angle selection.
Move the joystick left/right to select a
desired option.
1
The selected option is indicated in blue.
Audio Subtitles Angle
Move the joystick up/down to switch to the
desired setting.
2
This switches you to the selected setting.
For Audio
Selection options switch as follows:
Audio 1 Ô Audio 2 Ô Audio 3 Ô Audio 1
For Subtitles
Selection options switch as follows:
Subtitles 1 Ô Subtitles 2 Ô Subtitles OFF Ô Subtitles 1
For Angle
Selection options switch as follows:
Angle 1 Ô Angle 2 Ô Angle 3 Ô Angle 1
Note:
•
•
The number of switching options depends on how many options are recorded on the DVD.
You can switch Audio, Subtitle and Angle during playback using the respective buttons. For
details, refer to “Playback Variations” on page 24.
•
•
You can also switch settings by inputting numbers with the number buttons.
Display indications such as “Dolby D” and “5.1ch” indicate the audio system recorded on the
DVD. Depending on the setting, playback may not be with the same audio system as that
indicated.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Information Display 2 of a DVD
VD
In addition to the Search and Time Search functions of the information display 1, this display
lets you switch the disc for playback, select the range for Repeat play, and select the Picture
mode.
Switching Discs
You can switch discs while confirming disc type. The selected disc is indicated by an arrow.
Disc
Move the joystick left/right to select the
1
Disc option.
The Disc option is indicated in blue.
Move the joystick up/down to select the
desired disc.
2
Click the joystick.
The selected disc starts playing.
3
The currently selected disc
Note:
•
You can also switch discs by pressing a number button.
Selecting Repeat Range
You can choose between Repeat play of a disc, title or chapter.
Move the joystick left/right to select the
Repeat range option.
1
The Repeat range option is indicated in blue.
Repeat range
Move the joystick up/down to switch to the
desired setting.
2
This switches you to the selected setting.
Disc Ô Title Ô Chapter Ô Disc
•
When you select Disc, playback of the entire disc is repeated. When you select Title or
Chapter, playback of that title or chapter only is repeated.
Note:
•
When the Repeat play of a DVD disc is selected, play stops and depending on the disc a
menu is displayed upon completion of play of an entire disc once through.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Mode
You can select between Standard, Animation and Cinema modes.
Compared to Standard mode, Animation provides a picture with beautifully clear colors and
the Cinema mode assures images with well defined black/white contrast.
Move the joystick left/right to select the
Picture mode option.
1
The Picture mode option is indicated in blue.
Picture mode
Move the joystick up/down to switch to the
desired setting.
2
This switches you to the selected setting.
Standard Ô Animation Ô Cinema Ô Standard
Note:
•
Images may not be clear with some software and some displays.
Operating with the Information Display 1 of a Video CD
This display lets you switch discs for playback, use the Search function to specify a track to
search for desired scenes, use the Time Search function to specify a time to search for a
desired scene, switch audio output, and select the range for Repeat play. During playback of
Video CDs featuring PBC (Playback Control), “Play Back Control:ON” is displayed. During
such playback, Search and Time Search functions cannot be used nor can you select the
range for Repeat play. (See page 20.)
•
Displaying all the discs loaded in the magazine for disc selection is explained using the informa-
tion display 2.
Searching for a Desired Scene, Starting Playback from a Specified Time
You can use the Search function to search for a desired scene by specifying a track, and the
Time Search function to specify the time on a disc at which play starts.
Move the joystick left/right to select a
desired option.
1
The selected option is indicated in blue.
Track
Time
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the number buttons to input the desired number.
2
VD
For Tracks
To select 3, press button 3.
To select 10, press buttons 1 and 0 in order.
To select 23, press buttons 2 and 3 in order.
• To jump 10 tracks ahead of the selected one, press the 10 button.
ideo
V
VCD
For Time (Time Search)
To select 21 minutes 43 seconds, press buttons 2, 1, 4 and 3 in order.
To select 1 hour 11 minutes, convert the time into 71 minutes 00 seconds and press but-
tons 7, 1, 0 and 0 in order.
• To jump 10 seconds ahead of the selected time, press the 10 button.
Note:
•
•
Pressing the CLEAR button cancels the input number.
You can also select tracks by moving the joystick up/down.
While the input number is displayed, click the joystick.
This starts playback from the selected scene.
3
Note:
•
Time Search is not possible while the disc is stopped.
7 Direct Search
Even without using an information display you can start playback of a desired track. For
details, see page 21.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Repeat Range
You can choose between Repeat play of a disc or a track.
Move the joystick left/right to select the
Repeat range option.
1
The Repeat range option is indicated in blue.
Repeat range
Move the joystick up/down to switch to the
desired setting.
2
This switches you to the selected setting.
Disc Ô Track
•
When you select Disc, playback of the entire disc is repeated. When you select Track, play-
back of that track only is repeated.
Note:
•
When the Repeat play of a Video CD disc is selected, play stops and depending on the disc a
menu is displayed upon completion of play of an entire disc once through.
Selecting Audio Output
You can select between stereo and monaural audio output.
Move the joystick left/right to select the
Audio option.
1
The Audio option is indicated in blue.
Audio
Move the joystick up/down to switch to the
2
desired setting.
This switches you to the selected setting.
L+R (Stereo) Ô L (Left) Ô R (Right) Ô
L+R (Stereo)
•
When you select Stereo, audio is output through both left and right channels. When you
select Left or Right, audio is output from that channel only.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Information Display 2 of a Video CD
In addition to the Search and Time Search functions of the information display 1, this display
lets you switch the disc for playback and select the Picture mode. During playback of Video
CDs featuring PBC (Playback Control), “Play Back Control:ON” is displayed. During such
playback, both Search and Time Search functions cannot be used.
ideo
V
VCD
Switching Discs
You can switch discs while confirming disc type. The selected disc is indicated by an arrow.
Disc
Move the joystick left/right to select the
Disc option.
1
The Disc option is indicated in blue.
Move the joystick up/down to switch to a
desired disc.
2
Click the joystick.
The selected disc starts playing.
3
The currently selected disc
Note:
•
You can also switch discs by pressing a number button.
Selecting the Picture Mode
You can select between Standard, Animation and Cinema modes.
Compared to Standard mode, Animation provides a picture with beautifully clear colors and
the Cinema mode assures images with well defined black/white contrast.
Move the joystick left/right to select the
Picture mode option.
1
The Picture mode option is indicated in blue.
Picture mode
Move the joystick up/down to switch to the
2
desired setting.
This switches you to the selected setting.
Standard Ô Animation Ô Cinema Ô Standard
Note:
•
Images may not be clear with some software and some displays.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Information Display 1 of a CD
This display lets you switch discs for playback, use the Search function to specify a track to
search for desired track, select the range for Repeat play, and switch Random play and Scan
play ON/OFF.
•
Displaying all the discs loaded in the magazine for disc selection is explained using the informa-
tion display 2.
Searching for a Desired Track
You can use the Search function to specify a track to search for a desired track.
Move the joystick left/right to select the
Track option.
1
The Track option is indicated in blue.
Track
Press the number buttons to input the
desired track number.
2
To select 3, press button 3.
To select 10, press buttons 1 and 0 in order.
To select 23, press buttons 2 and 3 in order.
• To jump 10 tracks ahead of the selected one, press the 10 button.
Note:
•
•
Pressing the CLEAR button cancels the input number.
You can also select tracks by moving the joystick up/down.
While the input number is displayed, click the joystick.
Play of the selected track starts.
3
Selecting Repeat Range
You can choose between Repeat play of a disc or a track.
Move the joystick left/right to select the
Repeat range option.
1
The Repeat range option is indicated in blue.
Repeat range
Move the joystick up/down to switch to the
2
desired setting.
This switches you to the selected setting.
Disc Ô Track
•
When you select Disc, playback of the entire disc is repeated. When you select Track, play-
back of that track only is repeated.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Random Play
Tracks of the CD you are currently listening to are played in a random order.
Move the joystick left/right to select the
Random option.
1
The Random option is indicated in blue.
Random play
CD
Move the joystick up/down to switch to the
desired setting.
2
This switches you to the selected setting.
ON Ô OFF
Setting Scan Play
The beginning of each track on the CD you are currently listening to is played for about 10
seconds.
Move the joystick left/right to select the Scan
option.
1
The Scan option is indicated in blue.
Scan play
Move the joystick up/down to switch the
Scan play ON.
2
This switches you to the selected setting.
ON Ô OFF
When you find the desired track, move the joystick up/down to cancel the
Scan play.
3
Note:
•
Scan play is canceled automatically after all tracks have been scanned.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Information Display 2 of a CD
The following explains how to switch discs with this display. With CDs, you can switch discs
using either information display 1 or information display 2.
Switching Discs
You can switch discs while confirming disc type. The selected disc is indicated by an arrow.
Disc
Move the joystick left/right to select Disc
option.
1
The Disc option is indicated in blue.
Move the joystick up/down to switch to a
desired disc.
2
Click the joystick.
The selected disc starts playing.
3
The currently selected disc
Note:
•
You can also switch discs by pressing a number button.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Initial Settings
Calling up the SET UP MENU
VD
You can use this menu to change Audio, Subtitle, Parental Lock and other DVD settings.
Press the STOP (7) button.
1
2
Press the MENU button when the
disc is stopped.
CD
The SET UP MENU is displayed.
Press the NEXT (¢) button.
The second SET UP MENU is dis-
played.
3
Note:
•
•
You can also switch between SET UP MENUS by moving the joystick up/down.
If you press the MENU button during display of a SET UP MENU, the SET UP MENU is
canceled and the unit returns to the previous display.
7 Returning to the previous display
The SET UP MENU lets you switch between displays of different setting options. To con-
tinue performing different settings, or if you make a mistake during setting, pressing the
RETURN button takes you back to the previous display each time you press it.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Subtitle (SUBTITLE LANG.)
You can set a desired subtitle language. If the selected subtitle language is recorded on the
DVD, subtitles are displayed in that language. You can also switch subtitle and assist subtitle
display ON/OFF.
Setting Subtitles and Assist Subtitles ON/OFF
You can switch Subtitle and Assist Subtitle ON/OFF as desired.
Move the joystick up/down to select
the “SUBTITLE LANG.”.
1
“SUBTITLE LANG.” is indicated in blue.
Click the joystick.
A subtitle language menu is displayed.
2
Move the joystick to select Subtitle ON/OFF
(LANG.) or Assist Subtitle ON/OFF
(ASSIST).
3
The currently set language is indicated in yellow.
The option selected with the joystick is indicated in
blue.
Click the joystick.
Each time you click the joystick the selected setting switches ON/OFF.
4
7 Assist Subtitles
Assist subtitles offer explanations for the aurally impaired. However, they are only dis-
played if they are recorded on the DVD.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Subtitle Language
VD
You can set the preferred subtitle language.
Move the joystick up/down to select
the “SUBTITLE LANG.”.
1
“SUBTITLE LANG.” is indicated in blue.
Click the joystick.
A subtitle language menu is displayed.
2
Move the joystick to select the desired lan-
guage.
3
The currently set language is indicated in yellow.
The language selected with the joystick is indicated
in blue.
Click the joystick.
4
A subtitle language is set.
Note:
•
•
•
•
If the selected language is not recorded on the disc, languages specified on the disc are dis-
played.
You can also switch the subtitle language during playback with the SUBTITLE button. (See
page 27.)
Even if you use the SUBTITLE button to switch the subtitle language, this does not affect the
settings here.
Pressing the RETURN button takes you back to the previous display.
7 When You Select “OTHERS”
When you select “OTHERS”, a language code input
display is shown. Refer to “Language Code Chart”
(see page 60), using the number buttons to input the
four digit code of the desired language, then click the
joystick.
Note:
•
Pressing the CLEAR button cancels the input numbers.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Audio Language (AUDIO LANG.)
You can set the preferred audio language.
Move the joystick up/down to select the
“AUDIO LANG.”.
1
“AUDIO LANG.” is indicated in blue.
Click the joystick.
An audio language menu is displayed.
2
Move the joystick to select the desired audio
language.
3
The currently set language is indicated in yellow.
The language selected with the joystick is indicated
in blue.
Click the joystick.
4
The audio language is set.
Note:
•
If the selected language is not recorded on the disc, the language specified on the disc is out-
put.
•
•
You can also switch the audio language during playback with the AUDIO button. (See page 26.)
Even if you use the AUDIO button to switch the audio language, this does not affect the set-
tings here.
•
•
Pressing the RETURN button takes you back to the previous display.
If you have selected “OTHERS”, refer to “When You Select “OTHERS”” on page 42.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Menu Language (MENU LANG.)
VD
You can set the preferred language for displays of menus recorded on a disc.
Move the joystick up/down to select the
“MENU LANG.”.
1
“MENU LANG.” is indicated in blue.
Click the joystick.
A menu language menu is displayed.
2
Move the joystick to select the desired menu
language.
3
The currently set language is indicated in yellow.
The language selected with the joystick is indicated
in blue.
Click the joystick.
4
The menu language is set.
Note:
•
If the selected language is not recorded on the disc, the language specified on the disc is dis-
played.
•
•
Pressing the RETURN button takes you back to the previous display.
If you have selected “OTHERS”, refer to “When You Select “OTHERS”” on page 42.
Setting the Parental Lock (PARENTAL)
Some DVDs let you use Parental Lock to restrict the viewing of violent and adult oriented
scenes by children. You can set the Parental Lock level in steps as desired.
Setting the Code Number and Level
When you first use this function, register your code number. If you do not register a code
number, Parental Lock will not operate.
Move the joystick up/down to select the
“PARENTAL”.
1
“PARENTAL” is indicated in blue.
Click the joystick.
Parental Lock setting menu is displayed.
2
Continued overleaf
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the number buttons to input a four
digit code number.
3
4
Click the joystick.
The code number is set, and you can now set the
level.
Move the joystick left/right to select the
desired level.
5
Level
Parental Lock details
LEVEL 8
Playback of the entire disc is possible. (Initial setting)
LEVEL 7 – LEVEL 2
This prevents playback of discs featuring adult oriented material.
(Playback of discs for children and non-adult oriented discs is
possible.)
LEVEL 1
Playback of discs for children only is possible.
Click the joystick.
The parental lock level is set.
6
Note:
•
•
We recommend to keep a record of your code number in case you forget it.
The Parental Lock level is recorded on the disc. You can confirm it by looking at the disc
package, included literature or on the disc itself. With discs that do not feature a recorded
Parental Lock level, you cannot use Parental Lock.
•
•
With some discs, Parental Lock operates to skip certain scenes only, after which normal play-
back resumes. For details, refer to the disc’s instructions.
Pressing the RETURN button takes you back to the previous display.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Level
VD
You can change the set Parental Lock level.
Move the joystick up/down to select the
“PARENTAL”.
1
“PARENTAL” is indicated in blue.
Click the joystick.
Parental Lock setting menu is displayed.
2
Press the number buttons to input the regis-
tered code number.
3
Click the joystick.
This enters the code number, and you can now
change the level.
4
Note:
•
If you input an incorrect code number, the prohibited mark “ ” is displayed.
Press the CLEAR button and input the correct code number.
•
If you forget your code number, refer to “If You Forget Your Code Number” on page 59.
Move the joystick left/right to select the
desired level.
5
6
Click the joystick.
The new Parental Lock level is set.
Note:
•
Pressing the RETURN button takes you back to the previous display.
7 When Playing DVDs Enabling Parental Lock
When you play a disc featuring Parental Lock, code number input indications may be dis-
played. If this happens and you do not input the correct code number, playback will not
begin.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Aspect Ratio (TV ASPECT)
There are two kinds of display. A wide screen display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect of 4:3. Be sure to select the correct TV
aspect for the display you use.
Move the joystick up/down to select the “TV
ASPECT”.
1
“TV ASPECT” is indicated in blue. (For details, see
page 40.)
Click the joystick.
TV aspect settings are indicated on the right of the
screen.
2
Move the joystick up/down to select the
desired TV aspect.
3
The currently set TV aspect is indicated in yellow.
The TV aspect selected with the joystick is indicated
in blue.
TV aspect
16:9
Setting detail
Select when using a wide screen display. (Initial setting)
LETTER BOX
Select when using a regular display. When playing discs featuring images
recorded with a 16:9 TV aspect, the picture is the shape of a letter box with
black bands at the top and bottom of the screen.
PANSCAN
Select when using a regular display. When playing discs featuring images
recorded with a 16:9 TV aspect, the picture is cut short at the right and left of
the screen.
Click the joystick.
The selected TV aspect is set.
4
Precaution:
•
When using a regular display, select either “LETTER BOX” or “PANSCAN”. Selecting 16:9
may result in an unnatural picture.
•
When playing discs that do not specify “PANSCAN”, playback is with “LETTER BOX”
even if you select the “PANSCAN” setting. Confirm whether the disc package bears the
16 : 9 LB
“
” mark. (See page 10.)
•
Some discs do not enable changing of the TV aspect. For details, refer to the disc’s instruc-
tions.
•
•
When selecting CDs and Video CDs, you cannot change the TV aspect settings.
Pressing the RETURN button takes you back to the previous display.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting for Digital Output (DIGITAL OUTPUT)
VD
Set digital output correctly to match the components you are using with this unit. There is no
need to change settings if this unit is not connected for digital output.
Precaution:
•
Incorrect setting may result in noise and damage to speakers so be sure to read the manuals
of the connected components.
Move the joystick up/down to select
the “DIGITAL OUTPUT”.
1
“DIGITAL OUTPUT” is indicated in blue. (For
details, see page 40.)
Click the joystick.
Digital output settings are indicated on the right of
the screen.
2
3
Move the joystick up/down to select the
desired digital output setting.
The currently set digital output setting is indicated in
yellow. The digital output setting selected with the
joystick is indicated in blue.
Digital output
Setting detail
DOLBY DIGITAL/LPCM Select when using a Dolby Digital compatible amp and decoder. The
Dolby Digital signal is output as it is. (Initial setting)
LPCM
Select when using an amp and decoder that are not Dolby Digital
compatible. The Dolby Digital signal is converted to and output as a
linear PCM signal.
Click the joystick.
The selected digital output setting is set.
4
Note:
•
Linear PCM output of DTS audio is not possible. If you select the LPCM setting, DTS audio
is not output.
•
When using this product with a Pioneer Multi-Channel AV Master Unit with digital input
(e.g. AVM-P9000R), select the “DOLBY DIGITAL/LPCM” setting.
•
•
When using this product with the “DEX-P9”, select the “LPCM” setting.
Pressing the RETURN button takes you back to the previous display.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Digital and Analog Audio Output (OUT SELECTION)
You can set linear PCM audio output for both digital and analog output. Set audio output cor-
rectly to match the components you are using with this unit.
Precaution:
•
If the setting is incorrect there will be no sound so be sure to read the manuals of the con-
nected components.
Move the joystick up/down to select the
“OUT SELECTION”.
1
“OUT SELECTION” is indicated in blue. (For
details, see page 40.)
Click the joystick.
Audio output settings are indicated on the right of
the screen.
2
3
Move the joystick up/down to select the
desired audio output setting.
The currently set audio output setting is indicated in
yellow. The audio output setting selected with the
joystick is indicated in blue.
Output setting Setting detail
48kHz
Select this setting when using digital connections.
A 48 kHz signal is output regardless of the audio sampling frequency.
A 96 kHz signal is converted to a 48 kHz signal. (Initial setting)
96kHz
Select this setting when using analog connections.
The signal is output with the same frequency as the audio sampling frequen-
cy. With a 96 kHz signal, you can enjoy exceptionally high sound quality.
Click the joystick.
The selected audio output setting is set.
4
Note:
•
•
•
With discs featuring 96 kHz recording, if you select the “96kHz” setting, audio is not output
from digital output.
With discs do not feature a CSS (Content Scrambling System) copy guard signal, a 96 kHz
digital signal is output.
When using this unit with a Multi-Channel AV Master Unit (e.g. AVM-P9000R), select the
“48kHz” setting. If you select the “96kHz” setting, no sound will be output when playing
discs featuring 96 kHz recordings.
•
Pressing the RETURN button takes you back to the previous display.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Angle Selection Mark Display (ANGLE)
VD
With discs featuring multi-angle recordings, the angle selection mark is displayed at the bot-
tom right of the screen during playback of scenes enabling multi-angle viewing. You can set
angle selection mark display ON/OFF.
Move the joystick up/down to select the
“ANGLE”.
1
“ANGLE” is indicated in blue. (For details, see page
40.)
Click the joystick.
Angle settings are indicated on the right of the
screen.
2
Move the joystick up/down to select angle
selection mark display ON/OFF.
3
The currently set option is indicated in yellow. The
option selected with the joystick is indicated in blue.
Click the joystick.
Angle selection mark display is set ON/OFF.
4
Note:
•
Pressing the RETURN button takes you back to the previous display.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Switching the Remote Control Operation Mode Switch
When using this product with a separately sold TV or display, you can use the supplied
remote controller to perform some TV or display operations. To operate the TV or display,
set the remote control operation mode switch to “TV”. To operate this product, set the switch
to “DVD”. (See page 7.)
Function Compatibility Charts
Functions that can be operated differ depending on the TV or display. Refer to the following
chart before operating.
Model
A
Button Number Button Name
B
C
D
E
F
G
u
i
!
!
!
!
!
!
@
@
A.SEL button
MENU button
OPEN/CLOSE button
BAND button
(upper)
(lower)
BSSM (CH CALL) button
REAR button
V.SEL button
RGB button
2
3
WIDE button
ANGLE button
7 Model
A:AVD-W8000*
D:AVX-P7000CD
G:GEX-P6400TV
B:AVX-7000
C:AVX-7300
F:GEX-P7000TV
E:AVX-P7300DVD
*Only when the front mode is selected.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Remote Control Code Selection Switch
The remote controller has two remote codes for DVD operation, “A” and “B”. To operate this
product, be sure to set the remote control code selection switch to “A”. When using this prod-
uct with other Pioneer DVD players, set the remote control code selection switch to “B” to
use the remote controller only for operation of those players.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Head Unit
When in the IP-BUS mode, some operations can be performed with the head unit.
When connected to a Pioneer Multi-Channel AV Master Unit (e.g. AVM-P9000R), refer to
the AV Master Unit Owner’s Manual.
When connected to the “DEX-P9”, refer to the Head Unit’s Manual.
When operating with another head unit, refer to the following Function Compatibility Chart
and Function Mode Switching, and operate with the appropriate buttons.
7 Function Compatibility Chart
Function
Reference page Button
Source switching
17
SOURCE, SOURCE/OFF
Disc switching (selection by disc number)
——
23
1 – 6
Disc switching
BAND, 23
(moving ahead one disc number at a time)
Disc switching
23
5/∞
(moving ahead or back one disc number at a time)
1
Chapter/track advance/return
Fast forward/reverse
20
22
2/3*
2
2/3*
*1 Operation is possible when the AUTO (A/M) mode is set to AUTO.
*2 Operation is possible when the AUTO (A/M) mode is set to MANU.
7 Function Mode Switching
When using convenient functions other than those usually used, switch the mode and operate.
Press the FUNCTION button.
Press the button repeatedly until the desired mode is selected.
1
FUNC1 = FUNC2 = FUNC3 = FUNC4 = AUTO (A/M)
Press the 5 button (press the ∞ button to switch OFF).
Perform AUTO (A/M) operation with the 2/3 button.
2
Mode
Press the 5 button
Head unit display switching
Pause (see page 24)
Press the 5 button for 2 seconds
FUNC1
FUNC2
FUNC3
FUNC4
———
Random play (see page 38)
Scan play (see page 38)
———
———
Repeat range switching
(See pages 32, 35 and 37)
Mode
Press the 2/3 button
Press the 2/3 button for 2 seconds
AUTO (A/M)
AUTO/MANUAL switching
———
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Power ON
When connected in the IP-BUS mode to a head unit other than a Pioneer Multi-Channel AV
Master Unit (e.g. AVM-P9000R), performing the following steps switches power ON.
Switch the display picture source to this unit.
For details, refer to the connected component’s Owner’s Manual.
1
Switch the head unit’s source to this unit.
For details, refer to the head unit’s Owner’s Manual.
2
Precaution
• You cannot switch the head unit’s source with remote control for DVD player.
• When you have switched power to this unit ON by pressing the POWER button, power
to this unit remains ON even if you switch power to the head unit OFF. Do not forget to
switch power to this unit OFF.
• When you eject a source disc (CD or MD) selected with the head unit, power to the
head unit switches OFF. Depending on the connection method, the picture on the rear
display may disappear.
ITS Playback
When connected to a Pioneer Multi-Channel AV Master Unit (e.g. AVM-P9000R), you can
operate the head unit to play just a desired track (ITS playback). This function differs slightly
from ITS playback with a Pioneer Multi-CD player. With this unit, ITS playback applies only
to the CD playing. For details, refer to the Multi-Channel AV Master Unit’s Owner’s Manual.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you think there is
something wrong
with the unit.
Before requesting
repairs, check the
following chart.
If the problem
remains even after
checking.
Reset the unit. (See
page 6.)
If the problem still
remains.
Request repairs.
\
\
7 Common problems
Symptom
Cause
Remedy
Power doesn’t switch ON.
Leads and connectors are incor- Confirm once more that all con-
The unit doesn’t operate.
rectly connected.
nections are correct.
A fuse has blown.
Fix the problem causing the
blown fuse, and replace the old
fuse with a new one of the same
capacity.
Noise and other factors are caus- Press the RESET button. (See
ing the built-in microprocessor
to operate incorrectly.
page 6.)
Operation with the remote
control isn’t possible.
The unit does not operate
correctly even when the
appropriate remote control
buttons are pressed.
The remote control operation
mode is incorrect.
Switch to the correct remote
control mode. (See pages 7, 51
and 52.)
Battery power is low.
Load new battery. (See page 8.)
Check using another disc.
Some operations are prohibited
with certain discs.
Playback is not possible.
The disc is dirty.
Clean the disc. (See page 13.)
Check what type the disc is.
The loaded disc is a type this
unit cannot play.
Non compatible video system
disc is loaded.
Change to a disc compatible to
your video system.
There’s no sound.
Connections are incorrect.
Check connections.
With some discs, 96 kHz output Switch the output setting to
is prohibited.
48 kHz. (See page 49.)
The unit is performing Still,
Slow Motion or Frame-By-
Frame playback.
There is no sound during Still,
Slow Motion or Frame-By-
Frame playback.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Common problems (continued)
Symptom
Cause
Remedy
There’s no picture.
The parking brake cord is not
connected.
Connect a parking brake cord,
and apply the parking brake.
The parking brake is not applied.
The prohibited mark “ ” is
displayed, and operation is
not possible.
The operation is prohibited for
the disc.
This operation is not possible.
The operation is not compatible
with the disc’s organization.
The picture stops (pauses)
and the unit cannot be
operated.
Reading of data has become
impossible during playback.
After pressing the STOP (7) but-
ton once, start playback once
more.
There’s no sound.
Volume level is low.
The volume level on the head
unit or connected component is
low.
Raise the volume level on the
head unit or connected compo-
nent.
The attenuator is ON.
Switch the attenuator on the
head unit OFF.
There’s audio and video
This unit is not firmly secured.
Secure this unit firmly.
skipping.
The picture is stretched, the
aspect is incorrect.
The aspect setting is incorrect
for the display.
Select the appropriate setting for
your display. (See page 47.)
Rear display picture
disappears.
The source disc (CD or MD)
being listened to with the head
unit has been ejected.
Before ejecting the disc, switch
the source. This problem may
occur when certain connection
methods are used.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Problems during DVD playback
Symptom
Cause
Remedy
The loaded disc has a different
region number from this unit.
Replace the disc with one featur-
ing the same region number as
this unit. (See page 10.)
Playback is not possible.
Parental Lock is ON.
Switch Parental Lock OFF or
change the level. (See page 44.)
A Parental Lock message is
displayed and playback is
not possible.
The code number is incorrect.
Input the correct code number.
(See page 46.)
Parental Lock cannot be
canceled.
You have forgotten your code
number.
Press the CLEAR button 10
times to cancel the code number.
(See page 59.)
The DVD playing does not fea- You cannot switch among multi-
Dialog language (and
subtitle language) cannot be
switched.
ture multiple language record-
ings.
ple languages if they aren’t
recorded on the disc.
You can only switch between
options indicated in the disc
menu.
Switch using the disc menu.
The DVD playing does not fea- Subtitles are not displayed if
No subtitles are displayed.
ture subtitles.
they are not recorded on the disc.
You can only switch between
options indicated in the disc
menu.
Switch using the disc menu.
The DVD playing does not fea- Switching to a selected language
ture dialog or subtitles in the lan- is not possible if the language
Playback is not with the
audio language and subtitle
language settings selected in
the SET UP MENU.
guage selected in the SET UP
MENU.
selected in the SET UP MENU
is not recorded on the disc.
The DVD playing does not fea- You cannot switch between mul-
Switching the viewing angle
is not possible.
ture scenes shot from multiple
angles.
tiple angles if the DVD does not
feature scenes recorded from
multiple angles.
You are trying to switch to mul- Switch between multiple angles
tiple angle viewing of a scene when watching scenes recorded
that is not recorded from multi- from multiple angles.
ple angles.
The disc features a signal to pro- Since this product is compatible
hibit copying. (Some discs may with the copy guard analog copy
The picture is extremely
unclear/distorted and dark
during playback.
have this.)
protect system, when playing a
disc that has a signal prohibiting
copying, the picture may suffer
from horizontal stripes or other
imperfections when viewed on
some displays. This does not
mean this product is malfunc-
tioning.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Problems during Video CD playback
Symptom
Cause
Remedy
The Video CD playing does not This operation is not possible
The PBC (Playback Control)
menu display cannot be
called up.
feature PBC.
with Video CDs not featuring
PBC.
PBC is switched OFF.
PBC is switched ON.
Switch PBC ON. (See page 20.)
Switch PBC OFF. (See page 20.)
Repeat play and Track/Time
Search are not possible.
7 Problems during Multi-Channel AV Master Unit connection
Symptom
Cause
Remedy
Optical digital cables are not
correctly connected.
Connect optical digital cables
correctly.
There’s no sound.
The Multi-Channel AV Master
Unit is not compatible with a
96 kHz signal.
Switch the output setting to
48 kHz. (See page 49.)
Indications are not the Multi-
Operate using this unit’s infor-
Information display
Channel AV Master Unit’s infor- mation display. (See page 29.)
operation is not possible.
mation display.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Forget Your Code Number
Refer to “Changing the Level”, step 3 on page 46, and press the CLEAR button 10 times.
The registered code number is canceled, letting you register a new one.
Error Message
When problems occur with disc playback, an error message appears on the display. Refer to
the table below to identify the problem, then take the suggested corrective action. If the error
persists, contact your dealer or your nearest PIONEER Service Center.
Message (error number)
When this message is displayed
Remedy
The disc is dirty.
Wipe the disc clean. (See page
13.)
Error-2
The disc is scratched.
If the disc is scratched, replace it
with another. (See page 13.)
The disc is loaded upside down. Check that the disc is loaded
correctly. (See page 14.)
This type of disc (CD-ROM etc.) Replace the disc with one this
cannot be played by this unit.
unit can play. (See page 9.)
This unit’s power supply or
internal mechanisms may be
malfunctioning.
Switch this unit OFF and then
switch it back ON. (See page
17.)
Error-5
Error-6
There are no discs loaded in the Load a disc or discs in the maga-
No Disc
magazine.
zine. (See page 14.)
The temperature of this unit is
outside of the normal operating
range.
Wait until the unit’s temperature
returns to within normal operat-
ing limits.
Thermal Protection
The DVD player’s door is open. Close the DVD player’s door.
DVD Player Door Open
CANNOT BE PLAYED
The disc does not have the same Replace the DVD with one bear-
region number as this unit.
This type of disc (CD-ROM etc.) Replace the disc with one this
cannot be played by this unit. unit can play. (See page 9.)
ing the correct region number.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code Chart
Language (code)
Japanese (ja)
English (en)
French (fr)
Spanish (es)
German (de)
Italian (it)
Input code
1001
0514
0618
0519
0405
0920
2608
1412
1620
1922
1821
1115
0512
0101
0102
0106
0113
0118
0119
0125
0126
0201
0205
0207
0208
0209
0214
0215
0218
0301
0315
0319
0325
0401
0426
0515
0520
0521
0601
0609
0610
0615
0625
0701
0704
0712
0714
0721
Language (code)
Hausa (ha)
Hindi (hi)
Input code
0801
0809
0818
0821
0825
0901
0905
0911
0914
0919
0923
1009
1023
1101
1111
1112
1113
1114
1119
1121
1125
1201
1214
1215
1220
1222
1307
1309
1311
1312
1314
1315
1318
1319
1320
1325
1401
1405
1415
1503
1513
1518
1601
1612
1619
1721
Language (code)
Romanian (ro)
Kinyarwanda (rw)
Sanskrit (sa)
Sindhi (sd)
Sangho (sg)
Input code
1815
1823
1901
1904
1907
Croatian (hr)
Hungarian (hu)
Armenian (hy)
Interlingua (ia)
Interlingue (ie)
Inupiak (ik)
Indonesian (in)
Icelandic (is)
Hebrew (iw)
Yiddish (ji)
Javanese (jw)
Georgian (ka)
Kazakh (kk)
Greenlandic (kl)
Cambodian (km)
Kannada (kn)
Kashmiri (ks)
Kurdish (ku)
Kirghiz (ky)
Latin (la)
Serbo-Croatian (sh) 1908
Chinese (zh)
Dutch (nl)
Sinhalese (si)
Slovak (sk)
Slovenian (sl)
Samoan (sm)
Shona (sn)
Somali (so)
Albanian (sq)
Serbian (sr)
Siswati (ss)
Sesotho (st)
Sundanese (su)
Swahili (sw)
Tamil (ta)
1909
1911
1912
1913
1914
1915
1917
1918
1919
1920
1921
1923
2001
2005
2007
2008
2009
2011
2012
2014
2015
2018
2019
2020
2023
2111
2118
2126
2209
2215
2315
2408
2515
2621
Portuguese (pt)
Swedish (sv)
Russian (ru)
Korean (ko)
Greek (el)
Afar (aa)
Abkhazian (ab)
Afrikaans (af)
Amharic (am)
Arabic (ar)
Assamese (as)
Aymara (ay)
Azerbaijani (az)
Bashkir (ba)
Byelorussian (be)
Bulgarian (bg)
Bihari (bh)
Bislama (bi)
Bengali (bn)
Tibetan (bo)
Breton (br)
Catalan (ca)
Corsican (co)
Czech (cs)
Telugu (te)
Tajik (tg)
Thai (th)
Lingala (ln)
Tigrinya (ti)
Turkmen (tk)
Tagalog (tl)
Setswana (tn)
Tonga (to)
Turkish (tr)
Tsonga (ts)
Tatar (tt)
Twi (tw)
Ukrainian (uk)
Urdu (ur)
Uzbek (uz)
Vietnamese (vi)
Volapük (vo)
Wolof (wo)
Xhosa (xh)
Yoruba (yo)
Zulu (zu)
Laothian (lo)
Lithuanian (lt)
Latvian (lv)
Malagasy (mg)
Maori (mi)
Macedonian (mk)
Malayalam (ml)
Mongolian (mn)
Moldavian (mo)
Marathi (mr)
Malay (ms)
Maltese (mt)
Burmese (my)
Nauru (na)
Welsh (cy)
Danish (da)
Bhutani (dz)
Esperanto (eo)
Estonian (et)
Basque (eu)
Persian (fa)
Finnish (fi)
Fiji (fj)
Faroese (fo)
Frisian (fy)
Nepali (ne)
Norwegian (no)
Occitan (oc)
Oromo (om)
Oriya (or)
Panjabi (pa)
Polish (pl)
Pashto, Pushto (ps)
Quechua (qu)
Rhaeto-Romance (rm) 1813
Kirundi (rn) 1814
Irish (ga)
Scots-Gaelic (gd)
Galician (gl)
Guarani (gn)
Gujarati (gu)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms
Aspect Ratio
This is the width-to-height ratio of a TV screen. A regular display has an aspect ratio of 4:3.
Wide-screen displays have an aspect ratio of 16:9, providing a bigger picture for exceptional
presence and atmosphere.
Chapter
DVD titles are in turn divided into chapters which are numbered in the same way as the
chapters of a book. With DVDs featuring chapters, you can quickly find a desired scene with
Chapter Search.
Dolby Digital
1
Dolby Digital provides multi-channel audio from up to 5.1 independent channels. This sys-
tem is the same as the Dolby Digital surround sound system used in theaters.
To enjoy Dolby Digital entertainment, you must connect this unit’s optical digital output
jacks to the optical digital input jacks of a Dolby Digital compatible amp.
DTS
This stands for Digital Theater Systems. DTS is a surround system delivering multi-channel
audio from up to 6 independent sources.
To enjoy discs featuring DTS audio recording, you must connect this unit’s optical digital
output jacks to the optical digital input jacks of a DTS compatible amp or decoder.
Linear PCM (LPCM)
This stands for Linear Pulse Code Modulation, which is the signal recording system used for
music CDs. Compared to music CDs, which feature 44.1 kHz/16-bit recordings, DVDs fea-
ture 48 kHz/16-bit – 96 kHz/24-bit recordings. The result is sound quality even higher than
that provided by music CDs.
MPEG
This stands for Moving Pictures Experts Group, and is an international video image compres-
sion standard. Some DVDs feature digital audio compressed and recorded using this system.
Multi-Angle
With regular TV programs, although multiple cameras are used to simultaneously shoot
scenes, only images from one camera at a time are transmitted to your TV. Some DVDs fea-
ture scenes shot from multiple angles, letting you choose your viewing angle as desired.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Audio (Multilingual Dialog)
Some DVDs feature dialog recorded in multiple languages. Dialog in up to 8 languages can
be recorded on a single disc, letting you choose as desired.
Multi-Subtitle
Subtitles in up to 32 languages can be recorded on a single DVD, letting you choose as
desired.
Optical Digital Output
By transmitting the audio signal as a digital signal, it’s possible to minimize any loss of
sound quality. Optical digital output refers to the transmission (output) of a digital audio sig-
nal via optical cable. (The amp or other component on the reception side must have optical
digital inputs.)
Parental Lock
Some DVDs with violent or adult-oriented scenes feature parental lock which prevents chil-
dren from viewing such scenes. With this kind of disc, if you set this unit’s parental lock
level, playback of scenes inappropriate for children will not be possible, or these scenes will
be skipped.
Playback Control (PBC)
This is a playback control signal recorded on Video CDs (Version 2.0). Using menu displays
provided by Video CDs with PBC lets you enjoy playback of simple interactive software and
software with search functions. You can also enjoy viewing high- and standard-resolution still
images.
Region Number
DVD players and DVD discs feature region numbers indicating the area in which they were
purchased. Playback of a DVD is not possible unless it features the same region number as
the DVD player. This unit’s region number is displayed on the rear of the unit.
Title
DVDs have a high data capacity, enabling recording of multiple movies on a single disc. If,
for example, one disc contains three separate movies, they are divided into Title 1, Title 2 and
Title 3. This lets you enjoy the convenience of Title Search and other functions.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the Units
Note:
•
This unit is for vehicles with a 12-volt battery
•
•
To prevent incorrect connection, the input side
and negative grounding. Before installing it in a
recreational vehicle, truck, or bus, check the
battery voltage.
of the IP-BUS or optical cable connector is
blue, and the output side is black. Connect the
connectors of the same colors correctly.
If this unit is installed in a vehicle that does not
have an ACC (accessory) position on the igni-
tion switch, the red lead of the unit should be
connected to a terminal coupled with ignition
switch ON/OFF operations. If this is not done,
the vehicle battery may be drained when you
are away from the vehicle for several hours.
•
•
•
To avoid shorts in the electrical system, be sure
to disconnect the · battery cable before begin-
ning installation.
Refer to each product’s manual for details on
connecting the power amp and other units, then
make connections correctly.
Secure the wiring with cable clamps or adhe-
sive tape. To protect the wiring, wrap adhesive
tape around them where they lie against metal
parts.
•
•
Route and secure all wiring so it cannot touch
any moving parts, such as the gear shift, hand-
brake and seat rails. Do not route wiring in
places that get hot, such as near the heater out-
let. If the insulation of the wiring melts or gets
torn, there is a danger of the wiring short-
circuiting to the vehicle body.
Don’t pass the yellow lead through a hole into
the engine compartment to connect to the bat-
tery. This will damage the lead insulation and
cause a very dangerous short.
Do not shorten any leads. If you do, the protec-
tion circuit may fail to work when it should.
Never feed power to other equipment by cut-
ting the insulation of the power supply lead of
the unit and tapping into the lead. The current
capacity of the lead will be exceeded, causing
overheating.
ACC position
No ACC position
•
Cords for this product and those for other
products may be different colors even if
they have the same function. When con-
necting this product to another product,
refer to the supplied Installation manuals
of both products and connect cords that
have the same function.
•
•
•
•
When replacing fuse, be sure to use only fuse
of the rating prescribed on the fuse holder.
If the RCA pin jack on the unit will not be
used, do not remove the caps attached to the
end of the connector.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Power Cord
Connection method
1. Clamp the parking brake
switch power supply side
lead.
This Product
2. Clamp firmly with
needle-nosed pliers.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side
of the parking brake switch.
Parking brake switch
Power supply side
Ground side
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Fuse resistor
Fuse holder
Yellow
To terminal always supplied with power
regardless of ignition switch position.
Black (ground)
To vehicle (metal) body.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Diagram
7 When connecting the Multi-Channel AV Master Unit
Gray
Green
Multi-Channel AV
Master Unit (e.g.
AVM-P9000R)
AV cable (supplied
with the Multi-Channel
AV Master Unit)
(sold separately)
Optical cable
(supplied with the Multi-
Channel AV Master Unit)
Red
Black
Yellow
Blue
Gray
6 m (19 ft. 8 in.)
IP-BUS cable (supplied )
RCA cable (sold separately)
Green
DVD control cable
(supplied with the
Multi-Channel AV
Master Unit)
Note:
This optical digital output jack is for
connection to the optical digital
input jack of a Multi-Channel AV
Master Unit.
•
IP-BUS cable
(supplied with the
Multi-Channel AV
Master Unit)
Blue
This Product
15 cm (5/8 in.)
Yellow
Black
(FRONT VIDEO
OUTPUT)
Black
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice guidance speaker
(supplied with the display)
AV system display
(e.g. AVX-7300)
(sold separately)
Not used.
Red
Multi-CD player
(sold separately)
IP-BUS cable
(supplied with the TV tuner)
Black
Blue
Blue
Hide-away TV Tuner
(e.g. GEX-P7000TV)
(sold separately)
RCA cable
(sold separately)
Green
20 pin cable (supplied
with the display)
Red
20 pin cable
(supplied with the TV tuner)
66
Download from Www.Somanuals.com. All Manuals Search And Download.
7 When connecting the Head Unit
AV receiver/CD
player with display
(e.g. AVH-P6400CD)
(sold separately)
Blue
Black
AV-BUS cable (sold separately)
IP-BUS cable (supplied
with the TV tuner)
Black
Blue
Hide-away TV Tuner
(e.g. GEX-P6400TV)
(sold separately)
Black
Black
Blue
Blue
AV-BUS cable (supplied
with the TV tuner)
67
Download from Www.Somanuals.com. All Manuals Search And Download.
This Product
Not used.
Black
Blue
Black
15 cm
(5/8 in.)
IP-BUS cable (supplied)
6 m (19 ft. 8 in.)
Yellow
(FRONT VIDEO
OUTPUT)
Multi-CD player
(sold separately)
Conversion cable (supplied)
6 m (19 ft. 8 in.)
68
Download from Www.Somanuals.com. All Manuals Search And Download.
7 When connecting the display with RCA input jacks
STAND
ALONE
IP-BUS
This Product
15 cm (5/8 in.)
Video output
Black
Audio outputs
Yellow
(FRONT VIDEO
OUTPUT)
Left
(White)
Right
(Red)
6 m (19 ft. 8 in.)
RCA cable
(sold separately)
RCA cable
(sold separately)
Remote sensor
(supplied with
the CD-R7)
To audio inputs
To video input
Display with RCA
input jacks
Connecting a rear display
Instead of video output for viewing on a front display, you can connect for video output enabling
viewing on a rear display (for passengers in the rear of the car). If you decide to use a rear display,
be sure to follow the warnings on the next page.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
7 When Using a Display connected Rear Video Output
This product’s Rear video output is for connection of a display to enable passengers in the
Rear seats to watch the DVD or Video CD.
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD
or Video CD while Driving.
This Product
15 cm (5/8 in.)
Audio outputs
Video output
Yellow
(REAR VIDEO
OUTPUT)
Left
(White)
Right
(Red)
RCA cable
(sold separately)
RCA cable
(sold separately)
To audio inputs
To video input
Display with RCA
input jacks
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Transportation of Multi-DVD Player
A transport screw has been attached to the set in order to protect it during transportation.
After removing the transport screw, cover the hole with the supplied seal. Be sure to remove
the transport screw before mounting the set. The removed transport screw should be retained
in the accessory bag for use the next time the set is transported.
Seal
After removing the transport screw, cover
the hole with the supplied seal.
Transport screw
Attach to the original position before transporting the set.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Note:
MODE Switch Setting
•
Before finally installing the unit, connect the
wiring temporarily, making sure it is all con-
nected up properly, and the unit and the system
work properly.
Before installing, use a pen tip or other thin,
pointed instrument to set the MODE Switch
to the appropriate position for the compo-
nent you are using it with.
•
•
•
•
•
•
Use only the parts included with the unit to
ensure proper installation. The use of unautho-
rized parts can cause malfunctions.
Consult with your nearest dealer if installation
requires the drilling of holes or other modifica-
tions of the vehicle.
Install the unit where it does not get in the dri-
ver’s way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
When mounting this unit, make sure none of
the leads are trapped between this unit and the
surrounding metalwork or fittings.
Do not mount this unit near the heater outlet,
where it would be affected by heat, or near the
doors, where rainwater might splash onto it.
Before drilling any mounting holes always
check behind where you want to drill the holes.
Do not drill into the gas line, brake line, electri-
cal wiring or other important parts.
STAND
ALONE
IP-BUS
•
•
If this unit is installed in the passenger com-
partment, anchor it securely so it does not
break free while the car is moving, and cause
injury or an accident.
If this unit is installed under a front seat, make
sure it does not obstruct seat movement. Route
all leads and cords carefully around the sliding
mechanism so they do not get caught or
pinched in the mechanism and cause a short
circuit.
•
•
Do not mount this unit on the spare tire board
or any other unstable place.
Do not mount this unit anywhere that gets the
sun and so becomes hot, like on the dashboard
or the rear shelf.
•
•
Mount this unit on a flat surface.
Installations in other than the horizontal or ver-
tical positions indicated will prevent this prod-
uct from performing correctly or could cause
malfunction.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the DVD Player Unit
7 Mounting Horizontally
Tapping screw (6 × 16 mm)
Use the holes indicated
with arrows.
Screw
(4 × 8 mm)
Bracket
Mounting board
Drill 4 to 4.5 mm diameter holes.
7 Mounting Vertically
Tapping screw (6 × 16 mm)
Use the holes indicated
with arrows.
Screw
(4 × 8 mm)
Bracket
Mounting board
Drill 4 to 4.5 mm diameter holes.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Mounting Angle
Top
Only 0 or 90
degree installation
is available.
The player cannot
be installed in this
direction.
The angle switching dial must be set on both
sides of the player to the same position.
Angle switching
dial
2 steps
7 Angle Switching Dial Adjustment
When the mounting angle is horizontal to the ground surface, set the dial to “H” position.
When the mounting angle is vertical to the ground surface, set the dial to “V” position.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Remote Sensor
Precaution:
•
•
Do not install on the dashboard where it may be subjected to direct sunlight. High tempera-
tures may result in damage to the unit.
Install within the transmission range of the remote control signal.
Stick the double-sided tape to the back of the remote sensor, and attach it to the center con-
sole.
Remote sensor
(supplied with the CD-R7)
Double-sided tape
(supplied with the CD-R7)
75
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Index
A
O
P
Angle
28, 31
28, 50
47, 61
41
Optical digital output
62
Angle selection mark
Aspect ratio
Assist subtitle
Audio language
Panscan
Parental lock
47
44, 62
26, 43
PBC (Playback control)
Picture mode
Prohibited mark
11, 23, 62
33, 36
C
D
Chapter
Code number
Condition memory
11, 61
44
21, 56
R
6
Random play
Region number
Repeat range
Reset
38
10, 62
32, 35, 37
6
Digital output
Direct search
DOLBY DIGITAL
DTS
48
21
12, 48, 61
12, 48, 61
S
Scan play
Set-up menu
Slow motion playback
Still picture
Subtitle language
38
40
F
Fast forward
Fast reverse
Frame-by-frame
22
22
24
25
24
27, 41
I
T
Information display
29
Title
Track
TV aspect
11, 62
11
L
47
Language code chart
Letter box
60
47
V
Linear PCM (LPCM)
48, 49, 61
Video CD
9
M
Menu language
MPEG
44
9, 61
Multi-angle
Multi-audio
Multi-subtitle
28, 61
26, 62
27, 62
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Player
System .................................... DVD-Video, Video CD,
Compact disc audio system
Dimensions .............. 275 (W) × 88 (H) × 202 (D) mm
[10-7/8 (W) × 3-1/2 (H) × 8 (D) in.]
Usable discs .... DVD-Video, Video CD, Compact disc
Signal format
Weight .................................................. 2.9 kg (6.4 lbs)
.................. Sampling frequency: 44.1/48/96 kHz
Number of quantization bits: 16/20/24; linear
Power source .... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system .................................. Negative type
Max. current consumption .................................... 1.3 A
Region Number .......................................................... 1
Video
Output level ...................... 1000 mVp-p/75 Ω ( 0.2 V)
Audio
(with DVD, at Sampling frequency 96 kHz)
Frequency response ................................ 5 – 44,000 Hz
Signal-to-noise ratio
............................ 96 dB (1 kHz) (IHF-A network)
(CD: 99 dB (1 kHz) (IHF-A network))
Dynamic range ...................................... 97 dB (1 kHz)
(CD: 96 dB (1 kHz))
Distortion ............................................ 0.003 % (1 kHz)
Output Level .......................... 1000 mV (1 kHz, 0 dB)
Number of channels ...................................... 2 (stereo)
Note:
•
Specifications and the design are subject to
possible modification without notice due to
improvements.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: (905) 479-4411
Published by Pioneer Corporation.
Copyright © 2002 by Pioneer Corporation.
All rights reserved.
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
San Lorenzo 1009 3er. Piso Desp. 302
Col. Del Valle Mexico, D.F. C.P. 03100
TEL: 55-5688-52-90
Publication de Pioneer Corporation.
Copyright © 2002 Pioneer Corporation.
Tous droits de reproduction et de traduction
réservés.
Printed in Japan
Imprimé au Japon
<KMMNF/02C00001>
<CRB1774-A> UC
Download from Www.Somanuals.com. All Manuals Search And Download.
|
