Operation Manual
CD RECEIVER
DEH-P6000UB
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Before You Start
01
Also, damage to this unit, smoke, and over-
heating could result from contact with liquids.
Keep this manual handy as a reference for op-
erating procedures and precautions.
Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
Protect this unit from moisture.
If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
Information to User
!
!
Alteration or modifications carried out without
appropriate authorization may invalidate the
user’s right to operate the equipment.
!
!
For Canadian model
This Class B digital apparatus complies with
Canadian ICES-003.
Important (Serial number)
The serial number is located on the bottom of
this unit. For your own security and convenience,
be sure to record this number on the enclosed
warranty card.
About this unit
The tuner frequencies on this unit are allo-
cated for use in North America. Use in other
areas may result in poor reception.
About WMA
WARNING
Handling the cord on this product or cords asso-
ciated with accessories sold with the product
may expose you to chemicals listed on proposi-
tion 65 known to the State of California and other
governmental entities to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
The Windows Media™ logo printed on the box
indicates that this unit can play back WMA
data.
Windows Media and the Windows logo are tra-
demarks or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
!
This unit may not operate correctly depend-
ing on the application used to encode
WMA files.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
CAUTION
Do not allow this unit to come into contact
with liquids. Electrical shock could result.
!
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
01
Before You Start
About MP3
— iPod nano third generation (software
version 1.0.2)
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e. revenue-
generating) real time broadcasting (terrestrial,
satellite, cable and/or any other media), broad-
casting/streaming via internet, intranets and/
or other networks or in other electronic con-
tent distribution systems, such as pay-audio or
audio-on-demand applications. An indepen-
dent license for such use is required. For de-
tails, please visit
— iPod classic (software version 1.0.2)
— iPod touch (software version 1.1.1)
For maximum performance, we recom-
mend that you use the latest version of the
iPod software.
Operations may vary depending on the soft-
ware version of iPod.
When using an iPod, iPod Dock Connector
to USB Cable is required.
Pioneer CD-IU50 interface cable is also
available. For details, consult your dealer.
This unit can control previous generations
iPod models with a Pioneer iPod adapter
(e.g. CD-IB100N).
For details concerning operation with the
iPod adapter, refer to Playing songs on iPod
!
!
!
!
About AAC
This unit plays back AAC files encoded by
iTunes®.
iTunes is a trademark of Apple Inc., registered
in the U.S. and other countries.
!
iPod is a trademark of Apple Inc., regis-
tered in the U.S. and other countries.
Portable audio player compatibility
!
Inquire at the manufacturer about your
USB portable audio player/USB memory.
About the SAT RADIO READY mark
This unit corresponds to the following.
— USB MSC (Mass Storage Class) compliant
portable audio player and memory
— WMA, MP3, AAC and WAV file playback
For details about the compatibility, refer to
The SAT RADIO READY mark printed on the
front panel indicates that the Satellite Radio
Tuner for Pioneer (i.e., XM tuner and Sirius sa-
tellite tuner which are sold separately) can be
controlled by this unit. Please inquire to your
dealer or nearest authorized Pioneer service
station regarding the satellite radio tuner that
can be connected to this unit. For satellite
radio tuner operation, please refer to the satel-
lite radio tuner owner’s manual.
iPod® compatibility
This unit can control and listen to songs on an
iPod.
!
This unit supports only an iPod with Dock
Connector.
!
The system will use direct satellite-to-recei-
ver broadcasting technology to provide lis-
teners in their cars and at home with
crystal-clear sound seamlessly from coast
to coast. Satellite radio will create and
package over 100 channels of digital-quality
music, news, sports, talk and children’s
programming.
!
This unit supports only the following iPods.
Supported iPod software versions are
shown below. Older versions of iPod soft-
ware may not be supported.
— iPod fifth generation (software version
1.2.1)
— iPod nano first generation (software ver-
sion 1.3.1)
— iPod nano second generation (software
version 1.1.3)
!
“SAT Radio”, the SAT Radio logo and all re-
lated marks are trademarks of Sirius Satel-
lite Radio inc., and XM Satellite Radio Inc.
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Before You Start
01
CAUTION
1
Register your product. We will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
!
!
Pioneer accepts no responsibility for data lost
on the USB portable audio player/USB mem-
ory even if that data is lost while using this
unit.
2
3
Receive updates on the latest products and
technologies.
Download owner’s manuals, order product
catalogues, research new products, and
much more.
Pioneer accepts no responsibility for data lost
on the iPod even if that data is lost while
using this unit.
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service (including warranty conditions) or any
other information. In case the necessary infor-
mation is not available, please contact the
companies listed below:
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized
Pioneer Service Station.
Protecting your unit from
theft
Please do not ship your unit to the companies
at the addresses listed below for repair without
advance contact.
The front panel can be detached to deter theft.
!
If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone sounds.
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
!
!
You can turn off the warning tone. See
You can turn off the face auto open. See
CANADA
Important
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R 0P2
1-877-283-5901
!
!
!
!
Handle gently when removing or attaching
the front panel.
Avoid subjecting the front panel to excessive
shock.
Keep the front panel out of direct sunlight and
high temperatures.
A few seconds after turning the ignition
switch to on or off, the front panel automati-
cally moves. When this happens, your fingers
may become jammed in the panel, so keep
your hands away from it.
905-479-4411
For warranty information please see the Lim-
ited Warranty sheet included with this unit.
Visit our website
Visit us at the following site:
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
01
Before You Start
!
Prior to using this unit for the first time
after installation
If the unit fails to operate properly
When strange or incorrect messages ap-
pear on the display
Removing the front panel
1
Press and hold OPEN to open the front
!
!
panel.
%
Press RESET with a pen tip or other
pointed instrument.
2
Slide and remove the front panel to-
ward you.
Take care not to grip it too tightly or to drop
the front panel and protect it from contact
with water or other fluids to prevent perma-
nent damage.
RESET button
About the demo mode
This unit features two demonstration modes.
One is the reverse mode, the other is the fea-
ture demo mode.
3
Put the front panel into the provided
protective case for safe keeping.
Important
Attaching the front panel
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
1
Make sure the inner cover is closed.
2
Replace the front panel by clipping it
into place.
Reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds. Pressing BAND when power to this
unit is turned off while the ignition switch is
set to ACC or ON cancels the reverse mode.
Press BAND again to start the reverse mode.
Resetting the microprocessor
The microprocessor must be reset under the
following conditions:
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Before You Start
01
tal public institutions’ rules that apply in your
country/area.
“Perchlorate Material – special handling may
apply.
perchlorate. (Applicable to California, U.S.A.)”
Feature demo mode
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON. Press DISP
during feature demo operation to cancel the
feature demo mode. Press DISP again to start.
Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.
!
Using the remote control
Point the remote control in the direction of the
front panel to operate.
!
The remote control may not function prop-
erly in direct sunlight.
Use and care of the remote
control
Installing the battery
Important
!
!
Do not store the remote control in high tem-
peratures or direct sunlight.
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Slide the tray on the back of the remote con-
trol out and insert the battery with the plus (+)
and minus (–) poles aligned properly.
!
When using for the first time, pull out the
film protruding from the tray.
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, consult a doc-
tor immediately.
CAUTION
!
!
Use one CR2025 (3 V) lithium battery.
Remove the battery if the remote control is not
used for a month or longer.
!
There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!
!
!
Do not handle the battery with metallic tools.
Do not store the battery with metallic objects.
If the battery leaks, wipe the remote control
completely clean and install a new battery.
When disposing of used batteries, comply
with governmental regulations or environmen-
!
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
ꢎ
ꢄ ꢋ
ꢀ ꢂ
ꢁ
ꢃ
ꢓ
ꢒ
ꢑ
ꢀ
ꢌ
ꢂ
ꢔ
ꢐ
ꢏ
ꢍ
ꢄ
ꢅ
ꢆ
ꢇ
ꢈ
ꢉꢊ
6 EJECT/OPEN button
Press to eject a CD from your built-in CD
What’s What
player.
Head unit
Press and hold to open or close the front
panel.
1 SRC/OFF button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
7 LIST button
Press to display the disc title list, track title
list, folder list, file list or preset channel list
depending on the source.
2 DISP/SCROLL button
Press to select different displays.
Press and hold to scroll the text information.
8 CLOCK/DISP OFF button
Press to change to the clock display.
Press and hold to turn the display indication
and button illumination off or on.
3 MULTI-CONTROL
Move to perform manual seek tuning, fast
forward, reverse and track search controls.
Also used for controlling functions.
Turn to increase or decrease the volume.
9 SW/BASS button
Press to switch to subwoofer setting menu.
When operating subwoofer menu, press to
switch setting.
Press and hold to switch to bass boost
menu.
4 S.Rtrv/SAT MODE button
Press to switch Sound Retriever settings.
When XM tuner or SIRIUS tuner is selected
as the source, press to change the channel
select mode.
When SIRIUS tuner is selected as the
source, press and hold to perform the In-
stant Replay mode.
a RDM/
/iPod button
Press to turn random function on or off
while using CD or USB.
5 RESET button
Press to reset the microprocessor.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
While using iPod, press this button to shuf-
fle all tracks.
Press and hold to switch the control mode
while using an iPod connected USB con-
nector of this unit.
If using the iPod with an interface adapter
(CD-IB100N), press to switch the shuffle
function.
i PGM button
Press to operate the preprogrammed func-
tions for each source. (Refer to Using the
j MUTE button
Press to turn off the sound. To turn on the
sound, press again.
k ENT button
b BAND/ESC button
Press to change to the entertainment dis-
play.
Press to select among three FM bands and
one AM band.
Press to return to the ordinary display when
operating menu.
l AUDIO button
Press to select various sound quality con-
trols.
Remote control
Operation is the same as when using the but-
tons on the head unit.
c VOLUME buttons
Press to increase or decrease the volume.
d FUNCTION button
Press to select functions.
e Thumb pad
Move to perform manual seek tuning, fast
forward, reverse and track search controls.
Also used for controlling functions.
Functions are the same as
MULTI-CONTROL except for volume con-
trol.
Press to display the disc title list, track title
list, folder list, file list or preset channel list
depending on the source.
f DIRECT button
Press to directly select the desired track.
g CLEAR button
Press to cancel the input number when 0 to
9 are used.
h 0 to 9 buttons
Press to directly select the desired track,
preset tuning or disc. Buttons 1 to 6 can op-
erate the preset tuning for the tuner or disc
number search for the multi-CD player.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Basic Operations
AUX input may generate noise. In this case,
stop charging.
Power ON/OFF
!
!
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
When this unit’s blue/white lead is connected
to the vehicle’s auto-antenna relay control
terminal, the vehicle’s antenna extends when
this unit’s source is turned on. To retract the
antenna, turn the source off.
Turning the unit on
%
Press SRC to turn the unit on.
Turning the unit off
%
Press OFF and hold until the unit turns
off.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 15).
Adjusting the volume
%
Press SRC repeatedly to switch be-
tween the following sources.
%
Turn MULTI-CONTROL to adjust the
XM tuner—SIRIUS tuner—Tuner—Televi-
sion—DVD player/Multi-DVD player—
Built-in CD player—Multi-CD player—
iPod—USB—External unit 1—External
unit 2—AUX1—AUX2—BT Audio—BT Tel-
ephone
sound level.
Notes
!
In the following cases, the sound source will
not change.
— When no unit corresponding to the se-
lected source is connected.
— When there is no disc or magazine in the
player.
— When the iPod is not connected to this
unit.
— When AUX (auxiliary input) is set to off
(refer to page 30).
— When the BT Audio source is set to off
!
!
AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili-
Charging the portable audio player using
car’s DC power source while connecting it to
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
Tuner
02
1
Press LIST.
Preset screen is displayed.
Basic Operations
2
Use MULTI-CONTROL to store the se-
1
2 3
4
5
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL up or down.
To return to the ordinary display, press BAND
or LIST.
6
1 Band indicator
2 5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3 LOC indicator
#
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Appears when local seek tuning is on.
4 Preset number indicator
5 Signal level indicator
Using the remote control
%
When you find a frequency that you
Shows the radio wave strength.
6 Frequency indicator
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
%
Select a band
Press BAND.
Band can be selected from among FM1, FM2,
FM3 or AM.
#
%
Manual tuning (step by step)
Push MULTI-CONTROL left or right.
%
Seek tuning
#
You can also recall radio station frequencies
Push and hold MULTI-CONTROL left or right
assigned to preset tuning numbers by pushing
MULTI-CONTROL up or down during the fre-
quency display.
for about one second and release.
#
You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
If you push and hold MULTI-CONTROL left or
#
right, you can skip stations. Seek tuning starts as
soon as you release MULTI-CONTROL.
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
!
Six stations for each band can be stored in
memory.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
The function menu is displayed.
4
Push MULTI-CONTROL left or right to
set the sensitivity.
FM: Level 1—Level 2—Level 3—Level 4
AM: Level 1—Level 2
The Level 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
3
Turn MULTI-CONTROL to select the
function.
BSM (best stations memory)—Local (local
seek tuning)
Notes
!
!
You can also select the function by pressing
FUNCTION on the remote control.
To return to the ordinary display, press BAND.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
1
Display the function menu.
2
Use MULTI-CONTROL to select BSM in
the function menu.
3
Press MULTI-CONTROL to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
#
To cancel, press MULTI-CONTROL again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Display the function menu.
2
Use MULTI-CONTROL to select Local in
the function menu.
3
Press MULTI-CONTROL to turn local
seek tuning on.
To turn local seek tuning off, press
#
MULTI-CONTROL again.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
%
Select a folder
Push MULTI-CONTROL up or down.
You cannot select a folder that does not have
a compressed audio file recorded in it.
Built-in CD Player
Basic Operations
#
1
2
3
%
Select a track
Push MULTI-CONTROL left or right.
%
Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
When playing compressed audio, there is no
sound on fast forward or reverse.
#
5
4
%
Return to root folder
Press and hold BAND.
If folder 01 (ROOT) contains no files, playback
commences with folder 02.
1 WMA/MP3/AAC/WAV indicator
Shows the type of audio file currently playing
when the compressed audio is playing.
2 Folder number indicator
#
Shows the folder number currently playing
when the compressed audio is playing.
3 Track number indicator
%
CD-DA
Press BAND.
Switch between compressed audio and
4 Play time indicator
#
This operation is available only when playing
CD-EXTRA or MIXED-MODE CDs.
If you have switched between compressed
5 Bit rate/sampling frequency indicator
Shows the bit rate or sampling frequency of
the current track (file) when the compressed
audio is playing.
#
audio and CD-DA, playback starts at the first
track on the disc.
!
When playing back VBR (variable bit
rate)-recorded WMA files, the average
bit rate value is displayed.
When playing back VBR (variable bit
rate)-recorded MP3 files, VBR is dis-
played instead of bit rate value.
Notes
!
The built-in CD player can play back audio CD
and compressed audio recorded on a CD-
played back.)
!
!
!
!
Read the precautions for discs and player on
After a disc has been inserted, press SRC to
select the built-in CD player.
There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read, FORMAT READ is dis-
played.
%
Open the front panel
Press EJECT.
Disc loading slot appears.
Disc loading slot
!
!
If an error message is displayed, refer to Error
Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
#
When loading a disc, face the label side of
a disc up.
!
You can eject the CD by pressing and holding
EJECT with eject position when the CD load-
ing or ejecting cannot operate properly.
%
Eject a disc
Press EJECT.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Selecting a track directly
Notes
When using the remote control, you can select
a track directly by entering the desired track
number.
!
!
!
!
You can scroll to the left of the title by pressing
and holding DISP.
Audio CD that contains certain information
such as text and/or number is CD TEXT.
If specific information is not recorded on a
disc, title or name is not displayed.
Depending on the version of iTunes® used to
write MP3 files onto a disc, comment informa-
tion may not be correctly displayed.
Depending on the version of Windows Media
Player used to encode WMA files, album
names and other text information may not be
correctly displayed.
When playing back VBR (variable bit rate)-re-
corded WMA files, the average bit rate value is
displayed.
When playing back VBR (variable bit rate)-re-
corded MP3 files, VBR is displayed instead of
bit rate value.
!
When audio files are being played back,
you can select track in the current folder.
1
Press DIRECT.
Track number input display appears.
2
Press 0 to 9 buttons to enter the desired
track number.
You can cancel the input number by pressing
CLEAR.
!
#
3
Press DIRECT.
!
!
The track for the entered number will play.
#
After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.
!
!
The sampling frequency shown in the display
may be abbreviated.
When Ever Scroll is set to ON at the initial set-
ting, text information scrolls continuously in
the display. Refer to Switching the ever scroll
Displaying text information on
disc
%
Press DISP to select the desired text in-
formation.
!
!
For title entered CD
Play time— : disc title and play time
For CD TEXT discs
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
Play time— : disc artist name and
track title— : disc artist name and
:
:
disc title— : disc title and : track title
—
: track artist name and : track title
—
: track title and play time— : track
title, : track artist name and : disc title
For WMA/MP3/AAC
1
Press LIST to switch to the track title list
!
mode.
Play time— : folder name and : file
name— : artist name and : track title
2
Use MULTI-CONTROL to select the de-
—
: artist name and : album title—
:
sired track title.
Turn to change the track title. Press to play.
album title and : track title— : track
title and play time— : comment and play
time— : track title, : artist name and
: album title
#
You can also change the track title by pushing
MULTI-CONTROL up or down.
To return to the ordinary display, press BAND
or LIST.
#
!
For WAV
Play time— : folder name and : file
name
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
3
Turn MULTI-CONTROL to select the
Selecting files from the file
name list
File name list lets you see the list of file names
(or folder names) and select one of them to
playback.
function.
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—Sound Retriever (sound re-
triever)—TitleInput "A" (disc title input)
1
Press LIST to switch to the file name list
Notes
mode.
Names of files and folders appear in the dis-
play.
!
You can also select the function by pressing
FUNCTION on the remote control.
To return to the ordinary display, press BAND.
If you do not operate functions except for
TitleInput "A" within about 30 seconds, the
display automatically returns to the ordinary
display.
When playing a compressed audio disc or CD
TEXT disc, you cannot switch to disc title input
display.
!
!
2
Use MULTI-CONTROL to select the de-
sired file name (or folder name).
Turn to change the name of file or folder.
— when a file is selected, press to play.
— when a folder is selected, press to see a list
of files (or folders) in the seleted folder.
— when a folder is selected, press and hold to
play a song in the selected folder.
!
#
You can also play the file by pushing
MULTI-CONTROL right.
You can also play a song in the selected folder
by pushing and holding MULTI-CONTROL right.
To return to the previous list (the folder one
level higher), push MULTI-CONTROL left.
Number of the folders/files in the currently se-
Selecting a repeat play range
#
1
Display the function menu.
#
#
2
Use MULTI-CONTROL to select
lected folder will be indicated on the right side of
the display.
Play mode in the function menu.
3
Press MULTI-CONTROL to select the re-
#
To return to the ordinary display, press BAND
peat range.
or LIST.
!
!
!
Disc repeat – Repeat all tracks
Track repeat – Repeat the current track
Folder repeat – Repeat the current folder
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
#
If you select another folder during repeat play,
the repeat play range changes to disc repeat.
Performing track search or fast forward/re-
Introduction of advanced
operations
#
verse during Track repeat (track repeat) changes
the repeat play range to disc/folder.
1
Press MULTI-CONTROL to display the
#
When Folder repeat (folder repeat) is se-
main menu.
lected, it is not possible to play back a subfolder
of that folder.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
Playing tracks in random order
Tracks in a selected repeat range are played in
random order.
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
%
Press RDM to turn random play on.
Using Sound Retriever
Sound Retriever function automatically en-
hances compressed audio and restores rich
sound.
Tracks play in a random order.
#
To turn random play off, press RDM again.
Note
%
Press S.Rtrv repeatedly to select the de-
You can also turn this function on or off in the
menu that appears by using MULTI-CONTROL.
sired setting.
OFF (off)—1—2
#
2 is more effective than 1.
Scanning folders and tracks
Scan play searches the song within the se-
lected repeat range.
Note
You can also perform this operation in the menu
that appears by using MULTI-CONTROL.
1
Display the function menu.
Using disc title functions
You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD is dis-
played.
2
Use MULTI-CONTROL to select
Scan mode in the function menu.
3
on.
Press MULTI-CONTROL to turn scan play
The first 10 seconds of each track is played.
Entering disc titles
4
When you find the desired track press
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
MULTI-CONTROL to turn scan play off.
If the display has automatically returned to
#
the playback display, select Scan mode again by
using MULTI-CONTROL.
#
1
Display the function menu.
After scanning of a disc (folder) is finished,
normal playback of the tracks begins.
2
Play the CD that you want to enter a
title for.
Pausing playback
3
Use MULTI-CONTROL to select
1
Display the function menu.
TitleInput "A" in the function menu.
4
Press DISP to select the desired charac-
ter type.
2
Use MULTI-CONTROL to select Pause in
Press DISP repeatedly to switch between the
following character types:
Alphabet (upper case), numbers and symbols
—Alphabet (lower case)—European letters,
such as those with accents (e.g. á, à, ä, ç)—
Numbers and symbols
the function menu.
3
Press MULTI-CONTROL to turn pause
on.
Playback of the current track pauses.
To turn pause off, press MULTI-CONTROL
#
again.
5
Push MULTI-CONTROL up or down to
select a letter of the alphabet.
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
6
Push MULTI-CONTROL left or right to
Playing songs on USB portable
audio player/USB memory
move the cursor to the previous or next
character position.
For details about the supported device, refer to
7
Move the cursor to the last position by
pushing MULTI-CONTROL right after enter-
ing the title.
When you push MULTI-CONTROL right one
more time, the entered title is stored in mem-
ory.
Basic Operations
ꢀ
ꢂ
ꢁ
8
Press BAND to return to the playback
display.
Notes
!
!
Titles remain in memory, even after the disc is
removed from the unit, and are recalled when
the disc is reinserted.
After data for 48 discs are stored in the mem-
ory, data for a new disc overwrites the oldest
one.
If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
When a multi-CD player that does not support
disc title functions is connected, you cannot
enter disc titles in this unit.
ꢊ
ꢃ
1 WMA/MP3/AAC/WAV indicator
Shows the type of file currently playing.
2 Folder number indicator
3 Track number indicator
4 Play time indicator
!
!
5 Bit rate/sampling frequency indicator
!
When playing back VBR (variable bit
rate)-recorded WMA files, the average
bit rate value is displayed.
!
When playing back VBR (variable bit
rate)-recorded MP3 files, VBR is dis-
played instead of bit rate value.
%
Select a folder
Push MULTI-CONTROL up or down.
%
Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
%
Select a track
Push MULTI-CONTROL left or right.
%
Return to root folder
Press and hold BAND.
Notes
!
!
Optimum performance of this unit may not be
obtained depending on the connected USB
portable audio player/USB memory.
If folder 01 (ROOT) contains no files, playback
commences with folder 02.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
!
When the USB portable audio player having
battery charging function is connected to this
unit and the ignition switch is set to ACC or
ON, the battery is charged.
You can disconnect the USB portable audio
player/USB memory anytime you want to fin-
ish listening to it.
If USB portable audio player/USB memory is
connected to this unit, the source is changed
to USB automatically. If you do not use an
USB device, disconnect it from this unit. De-
pending on the connected USB device, turn-
ing on the ignition switch while USB device is
connected to this unit may change the source
automatically.
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
!
!
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3
Turn MULTI-CONTROL to select the
function.
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—Sound Retriever (sound re-
triever)
Selecting an audio file directly
in the current folder
The operation is the same as that of the built-
in CD player.
Function and operation
Play mode, Random mode, Scan mode,
Pause and Sound Retriever operations are
basically the same as that of the built-in CD
player.
Displaying text information of
an audio file
The operation is the same as that of the built-
in CD player.
Function name
Operation
Refer to Selecting a repeat play
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the USB
portable audio player/USB mem-
ory are:
Play mode
Notes
!
!
!
Track repeat – Repeat just
the current file
Folder repeat – Repeat the
current folder
!
!
If the characters recorded on the audio file are
not compatible with the head unit, those char-
acters are not displayed.
The text information of some audio files may
not be correctly displayed.
All repeat – Repeat all files
Refer to Playing tracks in random
Random mode
Scan mode
Pause
Refer to Scanning folders and
Selecting files from the file
name list
The operation is the same as that of the built-
in CD player.
Sound Retriever
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
Playing songs on iPod
Notes
For details about the supported iPod, refer to
!
You can also select the function by pressing
FUNCTION on the remote control.
!
!
To return to the ordinary display, press BAND.
If you select another folder during repeat play,
the repeat play range changes to All repeat.
If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Folder repeat.
Basic Operations
!
ꢀ
!
!
When Folder repeat is selected, it is not pos-
sible to play back a subfolder of that folder.
After file or folder scanning is finished, nor-
mal playback of the files begins again.
ꢁ
ꢂ
1 Song number indicator
2 Play time indicator
3 Song time (progress bar)
%
Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
%
Select a track (chapter)
Push MULTI-CONTROL left or right.
Notes
!
When using an iPod, iPod Dock Connector to
USB Cable is required.
!
!
Read the precautions for iPod on page 67.
While iPod is connected to this unit, PIONEER
(or (check mark)) is displayed on the iPod.
If an error message is displayed, refer to Error
When the ignition switch is set to ACC or ON,
the iPod’s battery is charged while the iPod is
connected to this unit.
!
!
!
!
While the iPod is connected to this unit, the
iPod cannot be turned on or off.
Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
!
The iPod is turned off about two minutes after
the ignition switch is set to OFF.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
2
Use MULTI-CONTROL to select a cate-
Browsing for a song
gory.
Searching songs by category
Turn to change the category. Press to select.
Operations to control an iPod with this unit is
designed to be as close to the iPod as possible
to make operation and song search easy.
3
Press LIST to switch to alphabet search
mode.
!
Depending on the number of files in the
iPod, there may be delay when displaying a
list.
4
Turn MULTI-CONTROL to select a de-
sired alphabet.
!
If the characters recorded on the iPod are
not compatible with this unit, those charac-
ters are not displayed.
5
Press MULTI-CONTROL to display the al-
phabetical list.
If alphabet search is aborted, Not Found is
#
displayed.
1
2
Press LIST.
Use MULTI-CONTROL to select a cate-
Displaying text information on
iPod
gory.
Turn to change the category; press to select.
Playlists (playlists)—Artists (artists)—
Albums (albums)—Songs (songs)—Podcasts
(podcasts)—Genres (genres)—Composers
(composers)—Audiobooks (audiobooks)
List for the selected category is displayed.
%
Press DISP to select the desired text in-
formation.
Play time— : artist name and : song title
—
: artist name and : album name—
:
album name and : song title— : song title
and play time— : song title, : artist name
and : album name
#
You can start playback throughout the se-
lected category by pressing and holding
MULTI-CONTROL. You can also perform this op-
eration by pushing and holding
#
If the characters recorded on the iPod are not
compatible with this unit, those characters are
not displayed.
MULTI-CONTROL right.
#
You can also change the category by pushing
MULTI-CONTROL up or down.
You can also select the category by pushing
MULTI-CONTROL right.
To return to the previous category, push
MULTI-CONTROL left.
To return to the top tier of categories, push
and hold MULTI-CONTROL left.
Notes
#
!
!
You can scroll the text information to the left
by pressing and holding DISP.
When Ever Scroll is set to ON at the initial set-
ting, text information scrolls continuously in
the display. Refer to Switching the ever scroll
#
#
#
#
To return to the ordinary display, press BAND.
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Introduction of advanced
operations
3
Repeat step 2 to find a song you want
1
Press MULTI-CONTROL to display the
to listen to.
main menu.
2
Use MULTI-CONTROL to select
Searching songs by alphabet
FUNCTION.
Turn to change the menu option. Press to se-
lect.
1
Press LIST.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
The function menu is displayed.
Playing songs in a random
order (shuffle)
3
Turn MULTI-CONTROL to select the
function.
1
Display the function menu.
Play mode (repeat play)—Shuffle mode
(shuffle)—Shuffle all (shuffle all)—
Link search (link search)—Control mode
(control mode)—Pause (pause)—
Audiobooks (audiobook speed)—
Sound Retriever (sound retriever)
2
Use MULTI-CONTROL to select
Shuffle mode in the function menu.
3
Press MULTI-CONTROL to select your fa-
vorite setting.
Function and operation
!
!
!
Shuffle Songs – Play back songs in the se-
lected list in random order.
Shuffle Albums – Play back songs from a
randomly selected album in order.
Shuffle OFF – Cancel random play.
Play mode, Pause and Sound Retriever op-
erations are basically the same as that of the
built-in CD player.
Function name
Operation
Refer to Selecting a repeat play
Playing all songs in a random
order (shuffle all)
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the iPod
are:
%
Press
All songs on the iPod play randomly.
To turn shuffle all off, set Shuffle mode in the
to turn shuffle all on.
Play mode
#
!
Repeat One – Repeat the cur-
rent song
FUNCTION menu to off.
!
Repeat All – Repeat all songs
in the selected list
Note
You can also turn this function on in the menu
that appears by using MULTI-CONTROL.
Pause
Sound Retriever
Selecting songs from album list
of currently playing artist
Album list of the currently selected artist is
displayed. You can select an album or song
from the artist name.
Notes
!
You can also select the function by pressing
FUNCTION on the remote control.
To return to the ordinary display, press BAND.
If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
!
!
!
Depending on the number of files in the
iPod, there may be delay when displaying a
list.
1
on.
Press and hold LIST to turn link search
!
!
Control mode (control mode) function is
available only for iPod nano (second genera-
tion).
When Control mode is on, only
Control mode and Sound Retriever can be
operated.
Searches albums of the artist and displays the
list.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
2
Use MULTI-CONTROL to select an album
Changing audiobook speed
While listening to an audiobook on iPod, play-
back speed can be changed.
or song from the list.
For more details about the selecting operation,
1
Display the function menu.
Notes
!
!
If link search is aborted, Not Found is dis-
played.
You can also turn this function on in the menu
that appears by using MULTI-CONTROL.
2
Use MULTI-CONTROL to select
Audiobooks in the function menu.
3
Press MULTI-CONTROL to select your fa-
vorite setting.
Press MULTI-CONTROL repeatedly until the
desired setting appears in the display.
Operating this unit’s iPod
function from your iPod
This function is available only for iPod nano
(second generation).
This unit’s iPod function can be operated from
your iPod. Sound can be heard from car’s
speaker, and operation can be conducted from
your iPod.
!
!
!
Faster – Playback faster than normal speed
Normal – Playback in normal speed
Slower – Playback slower than normal
speed
!
While this function is in use, even if the
ignition key is turned off, iPod is not turned
off. To turn off power, operate the iPod.
1
Press iPod and hold to switch the con-
trol mode.
#
Each pressing and holding iPod switches the
control mode.
#
While using this function, play time and titles
are not displayed on this unit.
Even if this function is performed, track up/
down can be operated from this unit.
While using this function, browse function
cannot be operated from this unit.
#
#
2
Operate the connected iPod to select a
song and play.
Note
You can also turn this function on or off in the
menu that appears by using MULTI-CONTROL.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Audio Adjustments
03
Introduction of audio
adjustments
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1
Display the audio menu.
1
2
Use MULTI-CONTROL to select Fader.
#
If the balance setting has been previously ad-
1 Audio display
justed, Balance will be displayed.
Shows the audio adjustment status.
3
Push MULTI-CONTROL up or down to
1
Press MULTI-CONTROL to display the
adjust front/rear speaker balance.
Each time MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
F 15 to R 15 is displayed as the front/rear
speaker balance moves from front to rear.
main menu.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
#
F/R 0 is the proper setting when only two
speakers are used.
When the rear output setting is Rear SP :S/W,
3
Turn MULTI-CONTROL to select the
audio function.
#
Turn MULTI-CONTROL to switch between the
audio functions in the following order.
Fader (balance adjustment)—Powerful (gra-
phic equalizer adjustment)—50Hz (7-band
graphic equalizer adjustment)—LOUD (loud-
ness)—Sub W.1 (subwoofer on/off setting)—
Sub W.2 (subwoofer setting)—Bass (bass
boost)—HPF (high pass filter)—SLA (source
level adjustment)
you cannot adjust front/rear speaker balance.
4
Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
L 15 to R 15 is displayed as the left/right
speaker balance moves from left to right.
#
You can also select the audio function by
pressing AUDIO on the remote control.
You can select the Sub W.2 only when sub-
woofer output is turned on in Sub W.1.
When selecting FM as the source, you cannot
switch to SLA.
To return to the display of each source, press
BAND.
#
#
Using the equalizer
The equalizer lets you adjust the equalization
to match the car’s interior acoustic character-
istics as desired.
#
#
If you do not operate functions except for
50Hz within about 30 seconds, the display is
automatically returned to the ordinary display.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
03
Audio Adjustments
1
Recall the equalizer curve you want to
Display
Equalizer curve
adjust.
Powerful Powerful
Natural
Vocal
Natural
Vocal
2
Push MULTI-CONTROL up or down to
adjust the equalizer curve.
Custom1 Custom 1
Each time MULTI-CONTROL is pushed up or
down, the equalizer curve increases or de-
creases respectively.
Custom2 Custom 2
Flat
Flat
+6 to –4 (or –6) is displayed as the equalizer
curve is increased or decreased.
S.Bass
Super bass
#
The actual range of the adjustments are differ-
!
!
Custom1 and Custom2 are adjusted equal-
izer curves that you create. Adjustments
can be made with a 7-band graphic equali-
zer.
When Flat is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
ent depending on which equalizer curve is se-
lected.
#
The equalizer curve with all frequencies set to
0 cannot be adjusted.
Adjusting 7-band graphic equalizer
For Custom1 and Custom2 equalizer curves,
you can adjust the level of each band.
!
1
Display the audio menu.
A separate Custom1 curve can be created
for each source. (The built-in CD player and
the multi-CD player are set to the same
equalizer adjustment setting automati-
cally.) If you make adjustments when a
curve other than Custom2 is selected, the
equalizer curve settings will be memorized
in Custom1.
A Custom2 curve can be created common
to all sources. If you make adjustments
when the Custom2 curve is selected, the
Custom2 curve will be updated.
2
Use MULTI-CONTROL to select the gra-
phic equalizer adjustment.
Powerful appears in the display.
If the equalizer curve has been previously se-
lected, the curve of that previously selected
will be displayed instead of Powerful.
!
3
Push MULTI-CONTROL left or right to
select an equalizer curve.
Each time MULTI-CONTROL is pushed left or
right, equalizer curves are selected in the fol-
lowing order:
Powerful—Natural—Vocal—Custom1—
Custom2—Flat—S.Bass
1
Recall the equalizer curve you want to
adjust.
2
Use MULTI-CONTROL to select 7-band
graphic equalizer adjustment.
Frequency and the level (e.g., 50Hz +4) ap-
pears in the display.
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of Flat, can be adjusted to a fine de-
gree (nuance control).
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Audio Adjustments
03
3
Push MULTI-CONTROL left or right to
1
Display the audio menu.
select the equalizer band to adjust.
Each time MULTI-CONTROL is pushed left or
right, equalizer bands are selected in the fol-
lowing order:
#
You can also select the subwoofer setting
menu by pressing SW on the unit.
50Hz—125Hz—315Hz—800Hz—2kHz—
5kHz—12.5kHz
2
3
Use MULTI-CONTROL to select Sub W.1.
Press MULTI-CONTROL to turn subwoo-
4
Push MULTI-CONTROL up or down to
fer output on.
Normal appears in the display. Subwoofer out-
put is now on.
adjust the level of the equalizer band.
Each time MULTI-CONTROL is pushed up or
down, the level of the equalization band in-
creases or decreases.
+6 to –6 is displayed as the level is increased
or decreased.
#
To turn subwoofer output off, press
MULTI-CONTROL again.
4
Push MULTI-CONTROL left or right to
#
You can then select another band and adjust
select the phase of subwoofer output.
Push MULTI-CONTROL left to select reverse
phase and Reverse appears in the display.
Push MULTI-CONTROL right to select normal
phase and Normal appears in the display.
the level.
5
Press BAND to cancel the 7-band gra-
phic equalizer adjustment.
Adjusting loudness
Adjusting subwoofer settings
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
1
Display the audio menu.
!
When the subwoofer output is on, you can
select Sub W.2.
2
Use MULTI-CONTROL to select LOUD.
Press MULTI-CONTROL to turn loudness
3
on.
1
Display the audio menu.
#
Loudness level (e.g., Mid) appears in the dis-
play.
#
You can also select the subwoofer setting
To turn loudness off, press MULTI-CONTROL
menu by pressing SW on the unit.
again.
2
3
Use MULTI-CONTROL to select Sub W.2.
Push MULTI-CONTROL left or right to
4
Push MULTI-CONTROL left or right to
select a desired level.
Each time MULTI-CONTROL is pushed left or
right, level is selected in the following order:
Low (low)—Mid (mid)—High (high)
select cut-off frequency.
Each time MULTI-CONTROL is pushed left or
right, cut-off frequencies are selected in the
following order:
50Hz—63Hz—80Hz—100Hz—125Hz
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
03
Audio Adjustments
4
Push MULTI-CONTROL up or down to
4
Push MULTI-CONTROL left or right to
adjust the output level of the subwoofer.
Each time MULTI-CONTROL is pushed up or
down, subwoofer level increases or decreases.
+6 to -24 is displayed as the level is increased
or decreased.
select cut-off frequency.
Each time MULTI-CONTROL is pushed left or
right, cut-off frequencies are selected in the
following order:
50Hz—63Hz—80Hz—100Hz—125Hz
Boosting the bass
Bass boost function boosts the bass level of
sound.
Adjusting source levels
Source level adjustment (SLA) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
1
Display the audio menu.
!
Settings are based on the FM volume level,
which remains unchanged.
#
You can also select the bass boost setting by
pressing and holding SW.
1
Compare the FM volume level with the
level of the source you wish to adjust.
2
3
Use MULTI-CONTROL to select Bass.
Push MULTI-CONTROL up or down to
2
Display the audio menu.
select a desired level.
0 to +6 is displayed as the level is increased or
decreased.
3
Use MULTI-CONTROL to select SLA.
4
Push MULTI-CONTROL up or down to
adjust the source volume.
Using the high pass filter
Each time MULTI-CONTROL is pushed up or
down, source volume increases or decreases.
SLA +4 to SLA –4 is displayed as the source
volume is increased or decreased.
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are output
from the front or rear speakers.
Notes
!
!
The AM volume level can also be adjusted
with source level adjustments.
The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
1
Display the audio menu.
2
Use MULTI-CONTROL to select HPF.
!
!
External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
XM tuner and SIRIUS tuner are set to the
same source level adjustment volume auto-
matically.
3
Press MULTI-CONTROL to turn high
pass filter on.
80Hz appears in the display. High pass filter is
now on.
#
If the high pass filter has been previously ad-
justed, the frequency of that previously selected
will be displayed instead of 80Hz.
#
To turn high pass filter off, press
MULTI-CONTROL again.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Initial Settings
04
Adjusting initial settings
Selecting the display language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1
2
Display the intial setting menu.
1
Use MULTI-CONTROL to select
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
Language select.
3
Press MULTI-CONTROL to select the lan-
1 Function display
guage.
!
Shows the function status.
Each press of MULTI-CONTROL selects lan-
guages in the following order:
English—Français—Español
1
Press SRC and hold until the unit turns
off.
2
Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
Setting the date
The calender display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
3
Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)—
Calendar (calendar)—Clock (clock)—
Warning tone (warning tone)—
Face auto open (face auto open)—AUX1
(auxiliary input 1)—AUX2 (auxiliary input 2)—
Dimmer (dimmer)—Brightness (brightness)
—S/W control (rear output and subwoofer
controller)—Mute (sound muting/attenua-
tion)—Demonstration (feature demo)—
Reverse mode (reverse mode)—Ever-scroll
(ever scroll)—BT AUDIO (Bluetooth audio)—
Pin code input (pin code input)—
BT Version info. (Bluetooth version informa-
tion)
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1
2
Display the intial setting menu.
Use MULTI-CONTROL to select
Calendar.
Calendar appears in the display.
3
Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
Use the following instructions to operate each
particular setting.
4
Push MULTI-CONTROL up or down to
#
You can also select the function by pressing
FUNCTION on the remote control.
BT AUDIO and Pin code input can be se-
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.
#
lected only when Bluetooth adapter (e.g., CD-
BTB200) is connected to this unit.
#
To cancel initial settings, press BAND.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
04
Initial Settings
Setting the clock
Use these instructions to set the clock.
Switching the face auto open
To protect against theft, this unit features de-
tachable front panel. To detach the front panel
easily, the front panel opens automatically.
This function is on as a default.
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1
2
3
Display the intial setting menu.
Use MULTI-CONTROL to select Clock.
Push MULTI-CONTROL left or right to
1
2
Display the intial setting menu.
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour—Minute
Use MULTI-CONTROL to select
Face auto open.
3
Press MULTI-CONTROL to turn the face
auto open on.
To turn the face auto open off, press
As you select segments of the clock display,
the selected segment blinks.
#
MULTI-CONTROL again.
4
Push MULTI-CONTROL up or down to
put a clock right.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Note
You can match the clock to a time signal by
pressing MULTI-CONTROL.
!
If 00 to 29, the minutes are rounded down.
(e.g., 10:18 becomes 10:00.)
If 30 to 59, the minutes are rounded up. (e.g.,
10:36 becomes 11:00.)
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
!
1
2
Display the intial setting menu.
Switching the warning tone
Use MULTI-CONTROL to select AUX1/
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone sounds. You can
turn off the warning tone.
AUX2.
3
Press MULTI-CONTROL to turn AUX1/
AUX2 on.
#
again.
To turn AUX off, press MULTI-CONTROL
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1
2
Display the intial setting menu.
Switching the dimmer setting
Use MULTI-CONTROL to select
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car’s headlights are turned on. You
can turn the dimmer on or off.
Warning tone.
3
Press MULTI-CONTROL to turn warning
tone on.
#
To turn warning tone off, press
MULTI-CONTROL again.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Initial Settings
04
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
2
Use MULTI-CONTROL to select
S/W control.
3
Press MULTI-CONTROL to switch the
1
2
3
on.
#
Display the intial setting menu.
rear output setting.
Pressing MULTI-CONTROL will switch be-
tween Rear SP :F.Range (full-range speaker)
and Rear SP :S/W (subwoofer) and that status
will be displayed.
Use MULTI-CONTROL to select Dimmer.
Press MULTI-CONTROL to turn dimmer
#
When no subwoofer is connected to the rear
output, select Rear SP :F.Range.
When a subwoofer is connected to the rear
To turn dimmer off, press MULTI-CONTROL
again.
#
output, set for subwoofer Rear SP :S/W.
Adjusting the brightness
You can adjust the display brightness.
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
!
!
If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
1
2
Display the intial setting menu.
Use MULTI-CONTROL to select
Brightness.
3
Push MULTI-CONTROL left or right to
adjust the brightness level.
0 to 15 is displayed as the level is increased or
decreased.
Switching the sound
muting/attenuation
#
When dimmer is functioning, the brightness
level can be adjusted 0 to 10.
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
Setting the rear output and
subwoofer controller
!
!
!
The sound is muted or attenuated, MUTE
or ATT are displayed and no audio adjust-
ment is possible.
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
This unit’s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (Rear SP :F.Range) or subwoo-
fer (Rear SP :S/W) connection. If you switch
the rear output setting to Rear SP :S/W, you
can connect a rear speaker lead directly to a
subwoofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (Rear SP :F.Range).
1
2
Display the intial setting menu.
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
Use MULTI-CONTROL to select Mute.
1
Display the intial setting menu.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
04
Initial Settings
3
Press MULTI-CONTROL to switch the tel-
3
Press MULTI-CONTROL to turn the re-
verse mode on.
To turn the reverse mode off, press
ephone muting/attenuation.
Pressing MULTI-CONTROL will switch be-
tween TEL ATT (attenuation) and TEL mute
(muting) and that status will be displayed.
#
MULTI-CONTROL again.
Note
You can also turn on or off reverse mode by press-
ing BAND while this unit is turned off. For more
Switching the feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
Switching the ever scroll
When ever scroll is set to on, CD text informa-
tion scrolls continuously in the display. Set to
off if you prefer the information to scroll just
once.
1
2
Display the intial setting menu.
Use MULTI-CONTROL to select
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
Demonstration.
3
Press MULTI-CONTROL to turn the fea-
ture demo on.
To turn the feature demo off, press
MULTI-CONTROL again.
1
2
Display the intial setting menu.
#
Use MULTI-CONTROL to select
Ever-scroll.
Notes
3
Press MULTI-CONTROL to turn the ever
!
!
Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.
You can also turn on or off feature demo by
pressing DISP while this unit is turned off. For
scroll on.
#
To turn the Ever Scroll off, press
MULTI-CONTROL again.
Activating the BT Audio source
You need to activate the BT Audio source in
order to use a Bluetooth audio player.
!
You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
Switching the reverse mode
If you do not perform an operation for about
30 seconds, screen indications start to reverse,
and continue reversing every 10 seconds.
!
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1
2
Display the intial setting menu.
Use MULTI-CONTROL to select
1
2
Display the intial setting menu.
BT AUDIO.
Use MULTI-CONTROL to select
Reverse mode.
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Initial Settings
04
3
Press MULTI-CONTROL to turn the
Displaying system version
for repair
BT Audio source on.
To turn the BT Audio source off, press
#
MULTI-CONTROL again.
Should this unit fails to operate properly and
you consult your dealer for repair, you may be
asked to indicate the system versions of this
unit and of Bluetooth module. You can display
the versions and confirm them.
Entering PIN code for
Bluetooth wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is 0000, but you
can change this in this function.
!
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1
2
Display the intial setting menu.
Use MULTI-CONTROL to select
!
With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
BT Version info.
The system (microprocessor) version of this
unit is displayed.
3
Push MULTI-CONTROL left to switch to
!
!
You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
the version of the Bluetooth module of this
unit.
#
Pushing MULTI-CONTROL right returns to the
system version of this unit.
1
2
Display the intial setting menu.
Use MULTI-CONTROL to select
Pin code input.
3
Push MULTI-CONTROL up or down to
select a number.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
5
After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROL.
PIN code can be stored in memory.
When you press MULTI-CONTROL again on
the same display, the PIN code you entered is
stored in this unit.
#
Pushing MULTI-CONTROL right in the confir-
mation display returns you to the PIN code input
display, and you can change the PIN code.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
05
Other Functions
Selecting AUX as the source
Using the AUX source
%
#
Press SRC to select AUX as the source.
If the auxiliary setting is not turned on, AUX
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to AUX1 or AUX2. The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
cannot be selected. For more details, see Switch-
Setting the AUX title
The title displayed for the AUX1 or AUX2
source can be changed.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
1
After you have selected AUX as the
source, use MULTI-CONTROL and select
FUNCTION to display TitleInput "A".
2
Enter a title in the same way as the
AUX1 source:
When connecting auxiliary equipment using a
stereo mini plug cable
built-in CD player.
For details concerning operation, refer to En-
%
Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1.
Using the external unit
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
AUX2 source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
Basic operations of the external unit are ex-
plained below. Allocated functions are differ-
ent depending on the connected external unit.
For details concerning functions, refer to exter-
nal unit’s owner’s manual.
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner’s manual.
This auxiliary device is automatically set to
AUX2.
Selecting the external unit as
the source
#
You can only make this type of connection if
the auxiliary device has RCA outputs.
%
Press SRC to select EXTERNAL as the
source.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Other Functions
Basic operation
Functions allocated to the following opera-
tions are different depending on the con-
nected external unit. For details concerning
functions, refer to the connected external
unit’s owner’s manual.
05
Turning the clock display
on or off
You can turn the clock display on or off.
!
Even when the sources and the feature
demo are off, the clock display appears on
the display.
%
%
%
%
Press BAND.
%
Press CLOCK to turn the clock display
on or off.
Press and hold BAND.
Each press of CLOCK turns the clock display
on or off.
#
when you perform other operations, but the clock
display appears again after 4 seconds.
Push MULTI-CONTROL left or right.
Push and hold MULTI-CONTROL left or
The clock display disappears temporarily
right.
%
Push MULTI-CONTROL up or down.
Note
In the following conditions, the clock display can-
not be turned on or off.
— While displaying three line text information
— While displaying ENT CLOCK (entertainment
clock) (Refer to Using different entertainment
Using the functions allocated
to 1 to 6 keys
%
Press any of 1 to 6 on the remote con-
trol.
Advanced operations
1
Press MULTI-CONTROL to display the
Switching the display
indication and button
illumination
Display indication and button illumination can
be switched on or off.
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
%
Press and hold DISP OFF.
3
Turn MULTI-CONTROL to select the
Pressing and holding DISP OFF switches the
display indication and button illumination on
or off.
function.
Function1 (function 1)—Function2 (function
2)—Function3 (function 3)—Function4 (func-
tion 4)—Auto/Manual (auto/manual)
#
While the display indication is turned off,
CLOCK/DISP OFF button lights up.
Even if the display indication is turned off, op-
!
You can also turn Function1 on or off by
pressing PGM on the remote control.
#
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.
Notes
!
!
You can also select the function by pressing
FUNCTION on the remote control.
To return to the ordinary display, press
BAND.
#
In the following conditions, the clock display
cannot be turned on or off.
— While displaying three line text information
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
05
Other Functions
— While displaying ENT CLOCK (entertain-
ment clock) (Refer to Using different enter-
%
Press PGM to turn pause on when se-
lecting the following sources:
!
!
!
COMPACT DISC – Built-in CD player
MULTI CD – Multi-CD player
USB – USB portable audio player/USB
memory
IPOD – iPod
BT Audio – Bluetooth audio player
DVD – DVD player/multi-DVD player
Using different
entertainment displays
!
!
!
You can enjoy entertainment displays while lis-
tening to each sound source.
#
To turn pause off, press PGM again.
1
Press MULTI-CONTROL to display the
%
Press PGM and hold to turn BSM on
main menu.
when selecting tuner as the source.
Press PGM and hold until the BSM turns on.
2
Use MULTI-CONTROL to select
#
To cancel the storage process, press PGM
ENTERTAINMENT.
Turn to change the menu option. Press to se-
lect.
again.
%
Press PGM and hold to turn BSSM on
when selecting television as the source.
Press PGM and hold until the BSSM turns on.
3
play.
Use MULTI-CONTROL to change the dis-
#
To cancel the storage process, press PGM
Turn to change the menu option. Press to se-
lect.
again.
BGV-1 (background visual 1)—BGV-2 (back-
ground visual 2)—BGP-1 (background picture
1)—BGP-2 (background picture 2)—BGP-3
(background picture 3)—BGP-4 (background
picture 4)—SIMPLE-1 (simple display 1)—
SIMPLE-2 (simple display 2)—LEVEL METER
(level meter)—VISUALIZER1 (visualizer 1)—
VISUALIZER2 (visualizer 2)—VISUALIZER3 (vi-
sualizer 3)—SPECTRUM ANALYZER 1 (spec-
trum analyzer 1)—SPECTRUM ANALYZER 2
(spectrum analyzer 2)—MOVIE (movie)—
ENT CLOCK (entertainment clock)
%
Press PGM to select the desired channel
select setting when selecting XM or SIRIUS
as the source.
Press PGM repeatedly to switch between the
following channel select settings:
Channel number (channel number select set-
ting)—Category (channel category select
setting)
#
You can also switch between the display by
pressing ENT on the remote control.
To return to the playback display, press
#
BAND.
Using the PGM button
You can operate the preprogrammed functions
for each source by using PGM on the remote
control.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
Displaying text information on
iPod
Playing songs on iPod
Basic operation
You can use this unit to control an interface
adapter for iPod, which is sold separately.
%
Press DISP to select the desired text in-
formation.
Play time— : artist name and : song title
1
—
: artist name and : album name—
:
album name and : song title— : song title
and play time
#
If the characters recorded on the iPod are not
compatible with this unit, those characters are
not displayed.
Notes
3
2
!
!
You can scroll the text information to the left
by pressing and holding DISP.
When Ever Scroll is set to ON at the initial set-
ting, text information scrolls continuously in
the display. Refer to Switching the ever scroll
1 Song number indicator
2 Play time indicator
3 Song time (progress bar)
%
Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
%
Select a track
Push MULTI-CONTROL left or right.
Browsing for a song
The operation is the same as that of the iPod
connected to USB interface of this unit. (Refer
However, the selectable categories are slightly
different. Selectable categories are
Playlists (playlists)—Artists (artists)—
Albums (albums)—Songs (songs)—Genres
(genres)
Notes
!
!
Read the precautions for iPod on page 67.
While iPod is connected to this unit, PIONEER
(or (check mark)) is displayed on the iPod.
If an error message is displayed, refer to Error
When the ignition switch is set to ACC or ON,
the iPod’s battery is charged while the iPod is
connected to this unit.
While the iPod is connected to this unit, the
iPod cannot be turned on or off.
Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
!
!
Introduction of advanced
operations
!
!
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
!
The iPod is turned off about two minutes after
the ignition switch is set to OFF.
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
3
Turn MULTI-CONTROL to select the
Bluetooth Audio
Basic Operations
If you connect a Bluetooth adapter (e.g. CD-
BTB200) to this unit, you can control Bluetooth
audio players via Bluetooth wireless technology.
function.
Play mode (repeat play)—Shuffle mode
(shuffle)—Pause (pause)
Function and operation
Play mode and Pause operations are basically
the same as that of the built-in CD player.
1
Function name Operation
Refer to Selecting a repeat play
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
1 Device name
Play mode
repeat play ranges of the iPod are:
Shows the device name of the connected
Bluetooth audio player (or Bluetooth adapter).
!
!
Repeat One – Repeat the cur-
rent song
Repeat All – Repeat all songs
in the selected list
Important
!
Depending on the Bluetooth audio player con-
nected to this unit, the operations available
with this unit are limited to the following two
levels:
— Lower level: Only playing back songs on
your audio player is possible.
— Higher level: Playing back, pausing, select-
ing songs, etc., are possible (all the opera-
tions illustrated in this manual).
Since there are a number of Bluetooth audio
players available on the market, operations
with your Bluetooth audio player using this
unit vary in great range. Refer to the instruc-
tion manual that came with your Bluetooth
audio player as well as this manual while op-
erating your player on this unit.
Information about songs (e.g. the elapsed
playing time, song title, song index, etc.) can-
not be displayed on this unit.
While you are listening to songs on your Blue-
tooth audio player, refrain from operating on
your cellular phone as much as possible. If
you try operating your cellular phone, the sig-
nal from your cellular phone may cause noise
on the song playback.
Pause
Notes
!
You can also select the function by pressing
FUNCTION on the remote control.
To return to the ordinary display, press BAND.
If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
!
!
!
Playing songs in a random
order (shuffle)
%
Press
repeatedly to select the de-
!
!
sired setting.
!
!
!
Shuffle Songs – Play back songs in the se-
lected list in random order.
Shuffle Albums – Play back songs from a
randomly selected album in order.
Shuffle OFF – Cancel random play.
Note
You can also turn this function on in the menu
that appears by using MULTI-CONTROL.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
!
When you are talking on a cellular phone con-
nected to this unit via Bluetooth wireless tech-
nology, song playback from your Bluetooth
audio player connected to this unit is muted.
Even if while you are listening to a song on
your Bluetooth audio player and you switch to
another source, playback of song continues.
(Play)—Stop (Stop)—Pause (pause)—
Device info (device information)
#
Pause is the same as that of the built-in CD
!
Notes
!
You can also select the function by pressing
FUNCTION on the remote control.
%
Fast forward or reverse
!
!
To return to the ordinary display, press BAND.
If a Bluetooth audio player is not connected to
this unit yet, Connection open and
Push and hold MULTI-CONTROL left or right.
%
Select a track
Push MULTI-CONTROL left or right.
Device info appear in the function menu and
other functions are not available.
Notes
!
If a Bluetooth audio player is connected via
higher level, Connection open does not ap-
pear in the function menu and the other func-
tions are available.
If a Bluetooth audio player is connected via
lower level, only Disconnect audio and
Device info appear in the function menu.
If you do not operate functions other than
Connection open and Disconnect audio
within about 30 seconds, the display is auto-
matically returned to the ordinary display.
!
!
For details concerning operation, refer to the
Bluetooth adapter’s operation manual. This
section provides brief information on Blue-
tooth audio player operations with this unit,
which slightly differs or is abbreviated from
that described in the Bluetooth adapter’s op-
eration manual.
Even though your audio player does not con-
tain a Bluetooth module, you can still control
it from this unit via Bluetooth wireless tech-
nology. To control your audio player using this
unit, connect a product featuring Bluetooth
wireless technology (available on the market)
to your audio player and connect the Blue-
tooth adapter (e.g. CD-BTB200) to this unit.
!
!
Connecting a Bluetooth audio
player
1
Display the function menu.
2
Use MULTI-CONTROL to select
Function and operation
Connection open in the function menu.
1
Press MULTI-CONTROL to display the
main menu.
3
Press MULTI-CONTROL to open the con-
nection.
2
Use MULTI-CONTROL to select
Always waiting is displayed. This unit is now
on standby for connection from Bluetooth
audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3
Turn MULTI-CONTROL to select the
function.
Connection open (connection open)—
Disconnect audio (disconnect audio)—Play
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
3
Press MULTI-CONTROL to disconnect
Note
the Bluetooth audio player.
Disconnected is displayed. The Bluetooth
audio player is now diconnected from this
unit.
Before you can use audio players you may need
to enter the PIN code into this unit. If your player
requires a PIN code to establish a connection,
look for the code on the player or in its accompa-
nying documentation. Refer to Entering PIN code
Displaying BD (Bluetooth
Device) address
1
Display the function menu.
Playing songs on Bluetooth
audio player
1
Display the function menu.
2
Use MULTI-CONTROL to select
Device info in the function menu.
2
Use MULTI-CONTROL to select Play in
3
Push MULTI-CONTROL left to switch to
the function menu.
the BD address.
12-digit hexadecimal string is displayed.
3
Press MULTI-CONTROL to start play-
#
Pushing MULTI-CONTROL right returns to the
back.
device name.
Stopping playback
Bluetooth Telephone
Basic Operations
If you use a Bluetooth adapter (e.g. CD-
BTB200), you can connect a cellular phone fea-
turing Bluetooth wireless technology to this
unit for hands-free, wireless calls, even while
driving.
1
Display the function menu.
2
Use MULTI-CONTROL to select Stop in
the function menu.
3
Press MULTI-CONTROL to stop the play-
back.
ꢀ
ꢂ
ꢁ ꢃ
Disconnecting a Bluetooth
audio player
1
Display the function menu.
ꢇ
ꢈ
ꢉ
ꢊ
2
Use MULTI-CONTROL to select
1 Device name
Shows the device name of the cellular phone.
2 Signal level indicator
Disconnect audio in the function menu.
Shows the signal strength of cellular phone.
!
Signal level indicator may differ from
the actual signal level.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
3 User number indicator
!
When selecting the phone source, you can
only operate Fader (balance adjustment) in
the audio menu.
Shows the registration number of the cellular
phone.
4 Battery strength indicator
Shows the battery strength of cellular phone.
Setting up for hands-free phoning
!
Battery strength indicator may differ
from the actual battery strength.
If the battery strength is not available,
nothing is displayed in the battery
strength indicator area.
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
!
5 Incoming call notice indication
Shows when an incoming call has been re-
ceived and not checked yet.
1
Connection
!
Incoming call notice is not displayed for
calls made when your cellular phone is
disconnected from this unit.
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
6 Automatic answering/Automatic rejecting in-
dicator
#
Your phone should now be temporarily con-
Shows AUTO when the automatic answering
function is on (for more details, refer to Setting
Shows REJECT when the automatic rejecting
function is on (for more details, refer to Setting
7 Clock display
nected. However, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2
Registration
To register your temporarily connected phone,
Shows the time (if connected with a phone).
8 Calendar display
Shows the day, month and year (if connected
with a phone).
3
Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
setting.
Important
!
!
Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using this unit without running
the engine can result in battery drainage.
Advanced operations that require your atten-
tion such as dialing numbers on the monitor,
using phone book, etc., are prohibited while
you are driving. When you need to use these
advanced operations, stop your vehicle in a
safe place.
#
Caller’s voice volume and ring volume may
vary depending on the type of cellular phone.
If the difference between the ring volume and
#
caller’s voice volume is big, overall volume level
may become unstable.
#
this unit, make sure to adjust the volume to a
proper level. If the volume is muted (zero level) on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
Before disconnecting the cellular phone from
Notes
!
Equalizer curve for the phone source is fixed.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
%
End all calls
Making a phone call
Voice recognition
Push MULTI-CONTROL down.
%
Switch between callers on hold
Press MULTI-CONTROL.
You can also perform this operation by push-
ing MULTI-CONTROL up.
1
Press BAND and hold until Voice dial
appears in the display.
#
Voice dial appears in the display. When
Voice dial ON is displayed, voice recognition
function is now ready.
%
Rejecting a call waiting
#
If your cellular phone does not feature voice
Push MULTI-CONTROL down.
recognition function, No voice dial appears in
the display and opearation is not available.
Notes
2
Pronounce the name of your contact.
!
!
Pushing MULTI-CONTROL down ends all
calls including calls waiting on line.
To end the call, both you and your caller need
to hang up the phone.
Taking a phone call
Answering or rejecting an incoming call
%
Answering an incoming call
Function and operation
When a call comes in, press
MULTI-CONTROL.
#
1
Press MULTI-CONTROL to display the
main menu.
You can also perform this operation by push-
ing MULTI-CONTROL up.
2
Use MULTI-CONTROL to select
FUNCTION.
%
End a call
Turn to change the menu option. Press to se-
lect.
Push MULTI-CONTROL down.
%
Rejecting an incoming call
The function menu is displayed.
When a call comes in, push MULTI-CONTROL
down.
3
Turn MULTI-CONTROL to select the
function.
Search & Connect (search and connect)—
Connection open (connection open)—
Disconect phone (disconnect phone)—
Connect phone (connect phone)—Set phone
(registering phone)—Delete phone (delete
phone)—PH.B.Transfer (phone book transfer)
—PH.B.Name view (phone book name view)
—Clear memory (clear memory)—
Number dial (call by entering number)—
Refuse calls (automatic reject setting)—
Auto answer (automatic answer setting)—
Ring tone (ring tone select)—Auto connect
(automatic connection setting)—Echo cancel
(echo cancel)—Device info (device informa-
tion)
Notes
!
!
If private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Operating a call waiting
Answering a call waiting
When a call comes in, press
MULTI-CONTROL.
You can also perform this operation by push-
ing MULTI-CONTROL up.
%
#
If not connected yet
The following functions cannot be operated.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
!
!
!
!
!
Disconect phone (disconnect phone)
Set phone (registering phone)
Clear memory (clear memory)
PH.B.Name view (phone book name view)
Number dial (call by entering number)
Connecting a cellular phone
Searching for available cellular phones
1
Display the function menu.
If connected but not registered yet
The following functions cannot be operated.
2
Use MULTI-CONTROL to select
!
!
!
!
!
Search & Connect (search and connect)
Connection open (connection open)
Connect phone (connect phone)
PH.B.Name view (phone book name view)
Clear memory (clear memory)
Search & Connect in the function menu.
3
Press MULTI-CONTROL to search for
available cellular phones.
While searching, SEARCHING flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device name or
Name not found (if names cannot be ob-
tained) is displayed.
If already connected and registered
The following functions cannot be operated.
!
!
!
!
Search & Connect (search and connect)
Connection open (connection open)
Connect phone (connect phone)
Set phone (registering phone)
#
If this unit fails to find any available cellular
phones, Not found is displayed.
Notes
4
Push MULTI-CONTROL up or down to
select a device name you want to connect.
!
You can also select the function by pressing
FUNCTION on the remote control.
To return to the playback display, press BAND.
Device info is the same as that of the Blue-
tooth audio. (Refer to Displaying BD (Bluetooth
PH.B.Name view (phone book name view)
cannot be selected for cellular phone regis-
tered guest phone.
If cellular phone is connected to this unit via
Bluetooth wireless technology with HSP
(Head Set Profile), PH.B.Name view,
Clear memory, Number dial and
5
Press MULTI-CONTROL to connect the
!
!
selected cellular phone.
While connecting, Connecting flashes. To
complete the connection, check the device
name (Pioneer BT Unit) and enter the link
code on your cellular phone. If the connection
is established, Connected is displayed.
!
!
#
The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
Refuse calls cannot be selected.
Using a cellular phone to initiate a
connection
!
If you do not operate functions other than
Search & Connect, Connection open,
Connect phone, PH.B.Transfer,
1
Display the function menu.
Disconect phone, Number dial,
Clear memory and PH.B.Name view within
about 30 seconds, the display automatically
returns to the ordinary display.
2
Use MULTI-CONTROL to select
Connection open in the function menu.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
more detailed instructions, see Deleting a regis-
3
Press MULTI-CONTROL to open the con-
nection.
Always waiting flashes and the unit is now
on standby for connection from a cellular
phone.
4
Press MULTI-CONTROL to register the
currently connected phone.
When registration is completed,
Reg.Completed is displayed.
4
Use cellular phone to connect to this
#
If the registration fails, Reg.ERROR is dis-
unit.
played. In this case, return to step 1 and try
again.
#
The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
Deleting a registered phone
1
Display the function menu.
Disconnecting a cellular phone
1
Display the function menu.
2
Use MULTI-CONTROL to select
Delete phone in the function menu.
2
Use MULTI-CONTROL to select
3
Push MULTI-CONTROL up or down to
Disconect phone in the function menu.
Device name of the connected phone appears
in the display.
select a registration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
3
Press MULTI-CONTROL to disconnect a
#
If the assignment is empty, No data is dis-
cellular phone from this unit.
After disconnection is completed,
Disconnected is displayed.
played and operation is not possible.
4
Push MULTI-CONTROL right to select
Delete YES.
Registering a connected
cellular phone
Delete YES is displayed. Deleting phone is
now on standby.
1
Display the function menu.
5
Press MULTI-CONTROL to delete the
phone.
After the phone is deleted, Deleted is dis-
played.
2
Use MULTI-CONTROL to select
Set phone in the function menu.
3
Push MULTI-CONTROL up or down to
select a registration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
#
As you select each assignment, you can see
whether or not a phone is already registered. If
the assignment is empty, No data is displayed. If
the assignment is already taken, the device name
appears. To replace an assignment with a new
phone, first delete the current assignment. For
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
1
Display the function menu.
Connecting to a registered
cellular phone
2
Use MULTI-CONTROL to select
Connecting to a registered phone
manually
PH.B.Transfer in the function menu.
1
Display the function menu.
3
Press MULTI-CONTROL to enter in the
phone book transfer standby mode.
Transfer YES appears in the display.
2
Use MULTI-CONTROL to select
Connect phone in the function menu.
4
Press MULTI-CONTROL to show the con-
firmation display.
Transfer YES appears in the display.
3
Push MULTI-CONTROL up or down to
select a registration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
5
Use cellular phone to perform phone
book transfer.
Perform phone book transfer using the cellu-
lar phone. For detailed instructions, refer to
the instruction manual that came with your
cellular phone.
#
If the assignment is empty, No data is dis-
played and operation is not possible.
4
Press MULTI-CONTROL to connect the
#
The display indicates how many entries have
selected cellular phone.
been transferred and the total number to be
transferred.
While connecting, Connecting is displayed.
After the connection is completed, Connected
is displayed.
6
Data transferred is displayed and
phone book transfer is completed.
Connecting to a registered phone
automatically
Changing the phone book display order
1
Display the function menu.
1
Display the function menu.
2
Use MULTI-CONTROL to select
2
Use MULTI-CONTROL to select
Auto connect in the function menu.
PH.B.Name view in the function menu.
Invert names YES appears in the display.
3
Press MULTI-CONTROL to turn auto-
matic connection on.
3
Press MULTI-CONTROL to change the
If your cellular phone is ready for Bluetooth
wireless connection, connection to this unit is
automatically established.
name view order.
Inverted is displayed and the name view
order is changed.
Pressing MULTI-CONTROL repeatedly
changes the name view order between first
name and last name.
#
To turn automatic connection off, press
MULTI-CONTROL again.
Using the phone book
Calling a number in the phone book
Transferring entries to the phone book
Important
The Phone Book can hold a total of 500 en-
tries. 300 from User 1, 150 from User 2, and 50
from User 3.
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
After finding the number you want to call in
the phone book, you can select the entry and
make the call.
1
Display the detailed list of your desired
Phone Book entry.
See step 1 to 5 on Calling a number in the
this.
1
Press LIST to display the phone book.
2
Push MULTI-CONTROL left or right to
2
Press and hold MULTI-CONTROL to dis-
select the first letter of the name you are
looking for.
play the name input screen.
Edit name is displayed.
3
Press MULTI-CONTROL to display en-
3
Press DISP to select the desired charac-
tries.
ter type.
The display shows the first three Phone Book
entries starting with that letter (e.g. “Ben”,
“Brian” and “Burt” when “B” is selected).
Each press of DISP switches the character
types in the following order:
Alphabet (upper case), numbers and symbols
—alphabet (lower case)—numbers and sym-
bols—European characters, such as those
with accents (e.g., á, à, ä, ç) or Russian char-
acters
4
Push MULTI-CONTROL up or down to
select a Phone Book entry you want to call.
5
Push MULTI-CONTROL right to display
#
Pressing and holding DISP enables you to
the detailed list of the selected entry.
The phone number, name and genre (if as-
signed) of entries are displayed in the detailed
list.
switch character set between ISO8859-1 (Eur-
opean characters) and ISO8859-5 (Russian char-
acters) alternately.
#
European characters and Russian characters
#
You can scroll the name and phone number
by pressing and holding DISP.
If several phone numbers are entered to an
entry, select one by turning MULTI-CONTROL.
If you want to go back and select another
entry, push MULTI-CONTROL left.
can’t be mixed.
#
4
Push MULTI-CONTROL up or down to
select a letter.
#
“_” (underbar).
#
To delete a character and leave a space, select
6
7
Press MULTI-CONTROL to make a call.
To end the call, push MULTI-CONTROL
5
Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
down.
6
Press MULTI-CONTROL to store the new
Editing the name of a Phone Book entry
name.
Important
Editing phone numbers
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
You can edit the names of Phone Book entries.
Each name can be up to 16 characters long.
You can edit the numbers of Phone Book en-
tries. Each phone number can be up to 24 di-
gits long.
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
1
Display the detailed list of your desired
4
Push MULTI-CONTROL right to show a
Phone Book entry.
confirmation display.
See step 1 to 5 on Calling a number in the
Clear memory YES is displayed.
#
If you do not want to clear memory that you
have selected, push MULTI-CONTROL left. The
display reverts.
2
Press and hold MULTI-CONTROL to dis-
play the name input screen.
Edit name is displayed.
5
Press MULTI-CONTROL to delete the
Phone Book entry.
Cleared is displayed.
The Phone Book entry is deleted. The display
returns to Phone Book entry list.
3
Turn MULTI-CONTROL to switch to the
number input screen.
Edit name (name input screen)—
Edit number (number input screen)—
Clear memory (clear memory screen)
Using the call history
4
Push MULTI-CONTROL left or right to
Important
move the cursor to the number you want
to change.
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
5
Push MULTI-CONTROL up or down to
change numbers.
Repeat these steps until you have finished
changing.
The 12 most recent calls made (dialled), re-
ceived and missed, are stored in the call his-
tory. You can browse the call history and call
numbers from it.
6
Press MULTI-CONTROL to store the new
number.
1
Press LIST to display the list.
Press LIST repeatedly to switch between the
following lists:
Clearing a phone book entry
Phone book—Missed call—Dialled call—Re-
ceived call
Important
#
For more details about the Phone Book list,
If no phone numbers are stored in the se-
lected list, No data is displayed.
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
#
1
Display the detailed list of your desired
Phone Book entry.
2
Turn MULTI-CONTROL to select a phone
See step 1 to 5 on Calling a number in the
number.
Turning MULTI-CONTROL to change the
phone numbers stored in the list.
2
Press and hold MULTI-CONTROL to dis-
play the name input screen.
Edit name is displayed.
#
If the number is already in the phone book,
the name is displayed.
You can also change the phone number by
pushing MULTI-CONTROL up or down.
#
3
Turn MULTI-CONTROL to switch to the
clear memory screen.
Edit name (name input screen)—
Edit number (number input screen)—
Clear memory (clear memory screen)
3
Push MULTI-CONTROL right to display
the detailed list.
Name and phone number are displayed in the
detailed list.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
#
If the number is already in the Phone Book
Making a call by entering
phone number
then the name is also displayed.
#
Turning MULTI-CONTROL switches to the pre-
Important
vious or next phone number diplayed in the de-
tailed list.
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
#
If you do not operate anything within about 30
seconds, the list display is canceled automati-
cally.
1
Display the function menu.
4
Press MULTI-CONTROL to make a call.
#
For an international call, press and hold
2
Use MULTI-CONTROL to select
Number dial in the function menu.
You can also enter in this menu from the
MULTI-CONTROL to add + to the phone number.
#
5
To end the call, push MULTI-CONTROL
standby display by pressing DIRECT on the re-
mote control.
down.
3
Push MULTI-CONTROL up or down to
select a number.
You can also input numbers by pressing 0 to 9
on the remote control.
Using preset numbers
#
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
Numbers that you dial frequently can be as-
signed to presets for quick recall.
#
Up to 24 digits can be entered.
1
Select a desired phone number from
5
When you completed entering the
the phone book or the call history. Or di-
rectly enter a desired phone number.
To select a desired phone number from the
Phone Book or the Call History, see the in-
structions explained in previous pages. To di-
rectly enter a desired phone number, see
number, press MULTI-CONTROL.
Call confirmation appears.
6
Press MULTI-CONTROL again to make a
call.
7
To end the call, push MULTI-CONTROL
down.
2
Press and hold one of 1 to 6 on the re-
Clearing memory
mote control to store the phone number.
The selected phone number has been stored
in memory. The next time you press the same
preset button, the phone number is recalled
from memory.
1
Display the function menu.
2
Use MULTI-CONTROL to select
Clear memory in the function menu.
3
Push MULTI-CONTROL up or down to
select an item.
Each time MULTI-CONTROL is pushed up or
down, the items are switched in the following
order:
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
Phone book (phone book)—Missed calls
(missed call history)—Dialed calls (dialled
call history)—Received calls (received call his-
tory)—Dial preset (preset phone numbers)—
All clear (delete all memory)
3
Press MULTI-CONTROL to turn auto-
matic answering on.
To turn automatic answering function off,
#
press MULTI-CONTROL again.
#
If you want to clear all the Phone Book,
Switching the ring tone
dialled/received/missed call history list and pre-
set phone number, select All clear.
1
Display the function menu.
#
If guest phone is connected to this unit via
Bluetooth wireless technology, Phone book can-
not be selected.
2
Use MULTI-CONTROL to select
Ring tone in the function menu.
4
Push MULTI-CONTROL right to deter-
3
Press MULTI-CONTROL to turn the ring
mine the item that you want to delete
from this unit.
Clear memory YES is displayed. Clearing
memory is now on standby.
tone on.
#
MULTI-CONTROL again.
To turn the ring tone off, press
#
If you do not want to clear memory that you
have selected, push MULTI-CONTROL left. The
display reverts.
Echo canceling and noise reduction
1
Display the function menu.
5
Press MULTI-CONTROL to clear the
memory.
2
Use MULTI-CONTROL to select
Cleared is displayed and data on the selected
item is cleared from this unit’s memory.
Echo cancel in the function menu.
3
Press MULTI-CONTROL to turn echo can-
celing on.
Setting automatic rejecting
#
To turn echo canceling off, press
1
Display the function menu.
MULTI-CONTROL again.
2
Use MULTI-CONTROL to select
Refuse calls in the function menu.
XM tuner
3
Press MULTI-CONTROL to turn auto-
matic call rejection on.
To turn automatic call rejection off, press
Listening to XM Satellite Radio
You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold
separately.
#
MULTI-CONTROL again.
For details concerning operation, refer to the
XM tuner’s operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner’s operation manual.
Setting automatic answering
1
Display the function menu.
!
With this unit, you can operate two addi-
tional functions: XM channel direct selec-
tion and preset channel list.
2
Use MULTI-CONTROL to select
Auto answer in the function menu.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
3
Press DIRECT.
1
2
3 4
The XM channel of entered number is
selected.
#
After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.
5
Switching the XM display
1 XM band indicator
2 XM channel number indicator
3 XM preset number indicator
%
#
Press DISP to switch the XM display.
You can scroll the text information to the left
by pressing and holding DISP.
4 XM channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
5 XM text information
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
Shows the text information of broadcast
channel.
!
Six stations for each band can be stored in
memory.
%
Select an XM band.
Press BAND.
Band can be selected from XM-1, XM-2 or
XM-3.
1
Press LIST.
Preset screen is displayed.
#
2
Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The XM preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
%
Select a channel.
Push MULTI-CONTROL left or right.
#
right, you can increase or decrease channel num-
ber continuously.
#
If you push and hold MULTI-CONTROL left or
You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
#
You can also change the station by pushing
MULTI-CONTROL up or down.
If you do not operate the list within about 30
Selecting an XM channel directly
When using the remote control, you can select
the XM channel directly by entering the de-
sired channel number.
#
seconds, the display is automatically returned to
the ordinary display.
1
Press DIRECT.
Channel number input display appears.
2
Press 0 to 9 buttons to enter the desired
channel number.
You can cancel the input number by pressing
#
CLEAR.
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
2
Push MULTI-CONTROL up or down to
Using the remote control
select the desired channel category.
%
When you find a station that you want
to store in memory, press one of preset
tuning buttons 1 to 6 and hold until the
XM preset number stops flashing.
The number you have pressed will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
3
Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
Displaying the Radio ID
Channel number select setting
1
Select the channel select settings to
Channel number.
Refer to Switching the XM channel select mode
#
You can also recall stations assigned to preset
tuning numbers by pushing MULTI-CONTROL up
or down.
2
Push MULTI-CONTROL left or right to
select RADIO ID.
If you select another channel, display of the ID
code is canceled.
Display of the ID code repeats displaying
#
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
#
RADIO ID and the ID code one after the other.
SIRIUS Satellite Radio tuner
Listening to SIRIUS Satellite Radio
You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
%
Press SAT MODE repeatedly to select
the desired channel select setting.
Channel number (channel number select set-
ting)—Category (channel category select
setting)
#
If you do not operate the function within about
30 seconds, the display is automatically returned
to the channel display.
Note
1
2
3 4
You can also perform this operation in the menu
that appears by using MULTI-CONTROL.
Selecting a channel in the channel
category
1
Select the channel select settings to
5
Category.
1 SIRIUS band indicator
2 SIRIUS channel number indicator
Refer to Switching the XM channel select mode
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
3 SIRIUS preset number indicator
4 SIRIUS channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
I.R is displayed during the Instant Replay
mode.
3
Press DIRECT.
The SIRIUS channel of entered number is
selected.
#
do not perform an operation within about eight
seconds, the mode is automatically canceled.
After entering the number input mode, if you
Switching the SIRIUS display
5 SIRIUS channel name
Shows the channel name of broadcast
channel.
%
Press DISP to switch the SIRIUS display.
Each press of DISP changes the SIRIUS dis-
play in the following order:
Play time—Channel number—Channel name
—Category name—Artist name—Song title/
program title—Composer name
%
Select a SIRIUS band.
Press BAND.
Band can be selected from SR-1, SR-2 or
SR-3.
#
#
Play time is displayed during the Instant Re-
play mode. Refer to Using Instant Replay function
%
Select a channel.
Push MULTI-CONTROL left or right.
#
right, you can increase or decrease channel num-
ber continuously.
#
Play time display indicates the time inverted
If you push and hold MULTI-CONTROL left or
from the live broadcast. Play time is displayed in
negative number.
#
You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
!
Six stations for each band can be stored in
memory.
%
When you find a station that you want
to store in memory press one of preset tun-
ing buttons 1 to 6 and hold until the SIRIUS
preset number stops flashing.
The number you have pressed will flash in the
SIRIUS preset number indicator and then re-
main lit. The selected station has been stored
in memory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
Selecting a SIRIUS channel directly
When using the remote control, you can select
the SIRIUS channel directly by entering the de-
sired channel number.
1
Press DIRECT.
Channel number input display appears.
2
Press 0 to 9 buttons to enter the desired
channel number.
You can cancel the input number by pressing
#
You can also recall stations assigned to preset
tuning numbers by pushing MULTI-CONTROL up
or down.
#
CLEAR.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
Introduction of advanced
operations
Note
You can also perform this operation in the menu
that appears by using MULTI-CONTROL.
1
Press MULTI-CONTROL to display the
main menu.
Selecting a channel in the channel
category
2
Use MULTI-CONTROL to select
FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to
select.
1
Select the channel select settings to
Category.
Refer to Selecting the SIRIUS channel select
3
Turn MULTI-CONTROL to select the
function.
2
Push MULTI-CONTROL up or down to
Channel mode (channel select mode setting)
—Game alert (game alert setting)—
Team setting (team setting)—Game info
(game info)—Pause (pause)
select the desired channel category.
3
Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
Notes
Using the Game Alert function
!
You can also select the function by pressing
FUNCTION on the remote control.
To return to the ordinary display, press BAND.
If you do not operate functions within about
30 seconds, the display is automatically re-
turned to the ordinary display.
During the Instant Replay mode, you can se-
Pause is the same as that of the built-in CD
Only when SIR-PNR2/SIR-PNR2C is connected
to this unit, you can operate this function.
This unit can alert you when games involving
your favorite teams are about to start. To use
this function you need in advance to set up a
game alert for the teams.
!
!
!
!
Selecting teams for Game Alert
1
Display the function selection menu.
Selecting the SIRIUS channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
2
Use MULTI-CONTROL to select
Team setting in the function menu.
3
Push MULTI-CONTROL left or right to
select a desired league.
League names are switched in the display.
4
Push MULTI-CONTROL up or down to
select a desired team.
Teams in the selected category are switched in
the display.
%
Press SAT MODE repeatedly to select
the desired channel select setting.
Channel number (channel number select set-
ting)—Category (channel category select
setting)
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
5
Press MULTI-CONTROL to store the se-
Displaying game information
lected team in memory.
The game alert function will start on that
team.
If games of your selected teams are currently
playing, you can display information of the
games and tune to the broadcast channel.
You can display information of the games
while enjoying the sound from currently tun-
ing station. You can also tune to the broadcast
channel when you wish to.
#
To turn the Game Alert off of the selected
team, press MULTI-CONTROL again.
When you have already made 12 team selec-
#
tions, FULL is displayed and additional team se-
lection is not possible. In this case, first delete
the team selection and then try again.
1
Display the function selection menu.
6
Repeat these steps for selecting other
teams.
2
Use MULTI-CONTROL to select
Up to 12 teams can be selected.
Game info in the function menu.
The game information of your selected team is
displayed.
Switching the Game Alert on or off
Once you made team selections, you need to
turn the Game Alert function on.
3
Push MULTI-CONTROL up or down to
!
The Game Alert function is on at the default
setting.
select a game.
The game is displayed, followed by more de-
tailed game information.
1
Display the function selection menu.
!
Game score will be updated automatically.
4
Press MULTI-CONTROL to switch to that
station to listen to the game.
2
Use MULTI-CONTROL to select
Game alert in the function menu.
Notes
3
Press MULTI-CONTROL to turn the
!
!
If you have not made any team selections,
NOT SET is displayed.
When games involving your favorite teams are
not currently playing, NO GAME is displayed.
Game Alert on.
The Game Alert function is now on.
#
To turn the Game Alert function off, press
MULTI-CONTROL again.
Displaying the Radio ID
If you select CH 000, the ID code is displayed.
When the game of the selected team
starts
When a game of the selected team is about to
start (or is currently playing) on a different sta-
tion, Game alert info is displayed. Press and
hold MULTI-CONTROL to switch to that sta-
tion, and you can listen to that game.
%
Push MULTI-CONTROL left or right to
select CH 000.
Note
To select CH 000, set the channel select setting to
Channel number. About the channel select set-
ting, refer to Selecting the SIRIUS channel select
!
If you do not operate the function within
about 10 seconds, the display is automati-
cally returned.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
Using Instant Replay function
1
2
Following functions can be operated during
the Instant Replay mode.
!
To use this function, Pioneer SIRIUS bus in-
terface (e.g. CD-SB10) is required.
To use this function, SIRIUS plug-and-play
unit with Instant Replay Function is re-
quired.
!
3
!
For details, refer to SIRIUS plug-and-play
unit’s manuals.
1 Disc number indicator
2 Track number indicator
3 Play time indicator
%
Performing the Instant Replay mode
When SIRIUS tuner is selected as the source,
press and hold SAT MODE.
%
Select a disc
Push MULTI-CONTROL up or down.
You can also select a disc by using 1 to 6 but-
tons on the remote control.
#
In the following conditions, tuner exits from
#
the Instant Replay mode.
— When BAND is pressed
— When another source is selected
!
For discs 1 to 6, press the corresponding
button number.
!
For discs 7 to 12, press and hold the corre-
sponding numbers, such as 1 for disc 7,
until the disc number appears in the dis-
play.
%
Select a track
Push MULTI-CONTROL left or right.
%
Fast forward or reverse
Push and hold MULTI-CONTROL left or right
for about one second and release.
%
Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
%
Select a track
Multi-CD Player
Basic Operations
You can use this unit to control a multi-CD
player, which is sold separately.
Push MULTI-CONTROL left or right.
Notes
!
!
When multi-CD player completes preparatory
operations, READY is displayed.
If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner’s
manual.
!
Only functions described in this manual are
supported by 50-disc multi-CD players.
This unit is not designed to operate disc title
list functions with a 50-disc multi-CD player.
For information about the disc title list func-
tions, refer to Selecting discs from the disc
!
!
If there are no discs in the multi-CD player ma-
gazine, No disc is displayed.
Using CD TEXT functions
You can use these functions only with a CD
TEXT compatible multi-CD player.
The operation is the same as that of the built-
in CD player.
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
Introduction of advanced
operations
You can only use Compression (compression
and DBE) with a multi-CD player that supports
them.
Function name Operation
Refer to Selecting a repeat play
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the multi-CD
player are:
1
Press MULTI-CONTROL to display the
Play mode
main menu.
!
!
!
M-CD repeat – Repeat all
discs in the multi-CD player
Track repeat – Repeat just the
current track
Disc repeat – Repeat the cur-
rent disc
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
Refer to Playing tracks in random
Random mode
Scan mode
Pause
3
Turn MULTI-CONTROL to select the
Refer to Scanning folders and
function.
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—compression (compression
and DBE)—ITS play mode (ITS play)—
ITS memo (ITS programming)—
TitleInput "A" (disc title input)
TitleInput "A"
#
If you do not operate functions other than
Notes
ITS memo and TitleInput "A" within about 30
seconds, the display automatically returns to the
ordinary display.
!
You can also select the function by pressing
FUNCTION on the remote control.
!
!
To return to the playback display, press BAND.
If you select other discs during repeat play,
the repeat play range changes to
#
When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot switch to
TitleInput "A". The disc title is already recorded
on the CD TEXT disc.
M-CD repeat.
!
!
If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Disc repeat.
After track or disc scanning is finished, nor-
mal playback of the tracks begins again.
Function and operation
Play mode, Random mode, Scan mode,
Pause and TitleInput "A" operations are basi-
cally the same as that of the built-in CD player.
Using compression and bass
emphasis
You can only use these functions with a multi-
CD player that supports them.
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
1
Display the function menu.
6
Press BAND to return to the playback
display.
Note
2
Use MULTI-CONTROL to select
compression in the function menu.
If the multi-CD player does not support
After data for 100 discs is stored in memory, data
for a new disc will overwrite the oldest one.
#
COMP/DBE, NO COMP is displayed when you at-
tempt to select it.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player begin to play.
3
Press MULTI-CONTROL to select your fa-
vorite setting.
COMP OFF—COMP 1—COMP 2—
COMP OFF—DBE 1—DBE 2
1
Select the repeat range.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
2
Display the function menu.
3
Use MULTI-CONTROL to select
ITS play mode in the function menu.
4
Press MULTI-CONTROL to turn ITS play
on.
ITS play appears in the display. Playback be-
gins of those tracks from your playlist within
the previously selected M-CD repeat or
Disc repeat ranges.
Creating a playlist with ITS programming
1
Play a CD that you want to program.
#
If no tracks in the current range are pro-
Push MULTI-CONTROL up or down to select
the CD.
grammed for ITS play, then ITS empty is dis-
played.
#
To turn ITS play off, press MULTI-CONTROL
2
Display the function menu.
again.
Erasing a track from your ITS playlist
You can delete a track from your ITS playlist if
ITS play is on.
If ITS play is already on, skip to step 2. If ITS
play is not already on, use MULTI-CONTROL.
3
Use MULTI-CONTROL to select
ITS memo in the function menu.
4
Select the desired track by pushing
MULTI-CONTROL left or right.
5
Push MULTI-CONTROL up to store the
1
Play the CD with the track you want to
currently playing track in the playlist.
Memory complete is displayed and the cur-
rently playing selection is added to your play-
list.
delete from your ITS playlist, and turn ITS
play on.
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
2
Display the function menu.
Using disc title functions
You can input CD titles and display the titles.
Then, you can easily search for and play a de-
sired disc.
3
Use MULTI-CONTROL to select
ITS memo in the function menu.
Entering disc titles
4
Select the desired track by pushing
Use the disc title input feature to store up to
100 CD titles (with ITS playlist) into the multi-
CD player. Each title can be up to 10 charac-
ters long.
For details concerning operation, refer to En-
MULTI-CONTROL left or right.
5
Push MULTI-CONTROL down to erase
the track from your ITS playlist.
The currently playing selection is erased from
your ITS playlist and playback of the next track
begins.
!
Titles remain in the memory even after the
disc is removed from the magazine, and
are recalled when the disc is reinserted.
After data for 100 discs is stored in mem-
ory, data for a new disc will overwrite the
oldest one.
#
If there are no tracks from your playlist in the
current range, ITS empty is displayed and nor-
mal playback resumes.
!
6
Press BAND to return to the playback
display.
Displaying disc titles
Press DISP to select the desired text in-
formation.
Erasing a CD from your ITS playlist
You can delete all tracks of a CD from your ITS
playlist if ITS play is off.
%
!
For title entered CD
1
Play the CD that you want to delete.
Play time— : disc title and play time
For CD TEXT discs
Push MULTI-CONTROL up or down to select
!
the CD.
Play time— : disc artist name and
track title— : disc artist name and
disc title— : disc title and : track title
:
:
2
Display the function menu.
—
: track artist name and : track title
: track title and play time
—
3
Use MULTI-CONTROL to select
ITS memo in the function menu.
Selecting discs from the disc title list
Disc title list lets you see the list of disc titles
entered in the multi-CD player and select one
of them to play back.
4
Push MULTI-CONTROL down to erase
all tracks on the currently playing CD from
your ITS playlist.
All tracks on the currently playing CD are de-
leted from your playlist and Memory deleted
is displayed.
1
Press LIST to switch to the disc title list
mode during the playback display.
2
Use MULTI-CONTROL to select the de-
5
Press BAND to return to the playback
sired disc title.
Turn to change the disc title. Press to play.
display.
#
You can also change the disc title by pushing
MULTI-CONTROL up or down.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
#
When playing CD TEXT disc, push
DVD Player
Basic Operations
MULTI-CONTROL right to see a list of the tracks
in the selected disc. Push MULTI-CONTROL left
to return to the disc list.
You can use this unit to control a DVD player or
multi-DVD player, which is sold separately.
For details concerning operation, refer to the
DVD player’s or multi-DVD player’s operation
manual. This section provides information on
DVD operations with this unit which differs
from that described in the DVD player’s or
multi-DVD player’s operation manual.
#
If no title is entered for a disc, No Title is dis-
played.
#
No disc is displayed next to the disc number
when there is no disc in the magazine.
#
seconds, the display automatically returns to the
ordinary display.
If you do not operate the list within about 30
1
2
3
4
5
1 DVD-V/VCD/CD/MP3/WMA indicator
Shows the type of disc currently playing.
2 Disc number indicator
Shows the number of the disc currently play-
ing when using a multi-DVD player.
3 Title/Folder number indicator
Shows the title (when playing DVD video) or
folder (when playing compressed audio) of
the selection currently playing.
4 Chapter/track number indicator
Shows the chapter (when playing DVD video)
or track (when playing Video CD, CD or com-
pressed audio) currently playing.
5 Play time indicator
%
Select a chapter/track
Push MULTI-CONTROL left or right.
%
Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
When playing compressed audio, there is no
sound on fast forward or reverse.
#
%
To skip back or forward to another
chapter/track, push MULTI-CONTROL left or
right.
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
Selecting a disc
seconds, the display is automatically returned to
the ordinary display.
!
You can operate this function only when a
multi-DVD player is connected to this unit.
Function and operation
%
Press any of 1 to 6 on the remote con-
Play mode, Random mode, Scan mode,
Pause and TitleInput "A" operations are basi-
cally the same as that of the built-in CD player.
Also, ITS play mode and ITS memo opera-
tions are basically the same as that the multi-
CD player.
trol to select the desired disc.
Selecting a folder
!
You can operate this function only when a
DVD player compatible with compressed
audio playback is connected to this unit.
Function name Operation
%
Push MULTI-CONTROL up or down to
Refer to Selecting a repeat play
select a folder.
But the repeat play range that you
can select is vary depending on
the type of disc or system. The re-
peat play ranges of the DVD
player/multi-DVD player are as
below:
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
During PBC playback of Video
CDs, this function cannot be oper-
main menu.
ated.
Play mode
2
Use MULTI-CONTROL to select
!
!
!
!
!
Disc repeat – Repeat the cur-
rent disc
Folder repeat – Repeat the
current folder
Title repeat – Repeat just the
current title
Chapter repeat – Repeat just
the current chapter
Track repeat – Repeat the cur-
rent track
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3
Turn MULTI-CONTROL to select the
function.
During DVD video or Video CD playback
Play mode (repeat play)—Pause (pause)
During CD playback
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—ITS play mode (ITS play)—
ITS memo (ITS input)—TitleInput "A" (disc
title input)
Refer to Playing tracks in random
Random mode
Scan mode
Pause
Refer to Scanning folders and
During compressed audio playback
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)
ITS play mode
ITS memo
#
You can also select the function by pressing
TitleInput "A"
FUNCTION on the remote control.
#
#
To return to the playback display, press BAND.
If you do not operate functions except for
ITS memo and TitleInput "A" within about 30
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Available accessories
06
2 Preset number indicator
3 Channel indicator
Notes
!
!
If you select other discs during repeat play,
the repeat play range changes to Disc repeat.
When playing back Video CD or CD, if you per-
form track search or fast forward/reverse dur-
ing Track repeat, the repeat play range
changes to Disc repeat.
%
Select a band
Press BAND.
%
Select a channel (step by step)
Push MULTI-CONTROL left or right.
!
!
When playing back compressed audio, if you
select another folder during repeat play, the
repeat play range changes to Disc repeat.
When playing back compressed audio, if you
perform track search or fast forward/reverse
during Track repeat, the repeat play range
changes to Folder repeat.
Multi-DVD player that has ITS functions and
disc title functions can also be connected to
this unit. In this case, ITS play mode,
ITS memo and disc title input can be con-
trolled.
The ITS function of a DVD player differs
slightly from ITS playback with a multi-CD
player. With multi-DVD player, ITS playback ap-
plies only to the CD playing. For details, refer
%
Seek tuning
Push and hold MULTI-CONTROL left or right
for about one second and release.
Notes
!
!
Band can be selected from TV-1 or TV-2.
You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
If you push and hold MULTI-CONTROL left or
right, you can skip stations. Seek tuning starts
as soon as you release MULTI-CONTROL.
!
!
!
Storing and recalling broadcast
stations
You can easily store up to 12 broadcast sta-
tions for later recall.
!
12 stations for each band can be stored in
memory.
TV tuner
Basic Operations
You can use this unit to control a TV tuner,
which is sold separately.
1
Press LIST.
Preset screen is displayed.
2
Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
For details concerning operation, refer to the
TV tuner’s operation manual. This section pro-
vides information on TV operations with this
unit, which differs from that described in the
TV tuner’s operation manual.
#
You can also store the station in memory by
pushing and holding MULTI-CONTROL right.
3
Use MULTI-CONTROL to select the de-
1
2
3
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL up or down.
If you do not operate the list within about 30
#
seconds, the display automatically returns to the
ordinary display.
1 Band indicator
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Available accessories
#
If you do not operate the list within about 30
Using the remote control
seconds, the display automatically returns to the
ordinary display.
You can also store and recall stations assigned
to preset tuning numbers P 1 to P 6 by using
the remote control.
%
When you find a station that you want
to store in memory, press one of preset
tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
#
You can also recall stations assigned to preset
tuning numbers by pushing MULTI-CONTROL up
or down during the channel display.
Storing the strongest broadcast
stations sequentially
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL and select
FUNCTION to display BSSM.
#
You can also select the function by pressing
FUNCTION on the remote control.
3
Press MULTI-CONTROL to turn BSSM
on.
Searching begins to flash. While Searching is
flashing, the 12 strongest broadcast stations
are stored in order from the lowest channel
up. When finished, the preset channel list ap-
pears.
#
To cancel the storage process, press
MULTI-CONTROL again.
4
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL up or down.
To return to the ordinary display, press BAND.
#
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to have the
error message recorded.
The connected
USB portable
audio player/
USB memory
contains WMA
files that are pro-
tected by
Play an audio file
not protected by
Windows Media
DRM 9/10.
TRK SKIPPED
Built-in CD Player
Windows Media
DRM 9/10
Message
Cause
Action
PROTECT
All the files on
the connected
USB portable
audio player/
USB memory are USB portable
protected by audio player/USB
Windows Media memory and con-
DRM 9/10 nect.
Transfer audio files
not protected by
Windows Media
DRM 9/10 to the
ERROR-11, 12, Dirty disc
17, 30
Clean disc.
ERROR-11, 12, Scratched disc
17, 30
Replace disc.
ERROR-10, 11, Electrical or me- Turn the ignition
12, 15, 17, 30, chanical
A0
switch OFF and
back ON, or switch
to a different
source, then back
to the CD player.
N/A USB
The USB device Connect a USB
connected to is portable audio
not supported by player or USB
ERROR-15
The inserted disc Replace disc.
this unit.
memory that is
does not contain
any data
USB Mass Storage
Class compliant.
ERROR-22, 23 The CD format
cannot be played
back
Replace disc.
CHECK USB
The USB connec- Confirm that the
tor or USB cable USB connector or
is short-circuited. USB cable is not
caught in some-
No Audio
The inserted disc Replace disc.
thing or damaged.
does not contain
any files that can
be played back
The connected
USB portable
audio player/
USB memory
Disconnect the
USB portable
audio player/USB
memory and do
TRK SKIPPED The inserted disc Replace disc.
contains WMA
consumes more not use it. Turn the
than 500 mA ignition switch to
(maximum allow- OFF, then to ACC
files that are pro-
tected by DRM
PROTECT
All the files on
the inserted disc
are secured by
DRM
Replace disc.
able current).
or ON and then
connect the com-
pliant USB porta-
ble audio player/
USB memory.
USB audio player/USB memory
Message
Cause
Action
No Audio
No songs
Transfer the audio
files to the USB
portable audio
player/USB mem-
ory and connect.
USB memory
Follow the USB
with security en- memory instruc-
abled is con-
nected
tions to disable the
security.
No songs
Transfer the songs
to iPod.
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Communication Perform one of the
iPod is not
Check if the con-
failure
following opera-
tions.
-Turn the ignition
switch OFF and
back ON.
-Disconnect the
USB portable
audio player/USB
memory.
-Change to a differ-
ent source.
charged but op- nection cable for
ERROR-19
ERROR-A1
CHECK USB
erates correctly
iPod shorted out
(e.g., not caught in
metal objects).
After checking,
turn the ignition
switch OFF and
back ON or discon-
nect the iPod and
connect again.
No Songs
STOP
No songs
Transfer the songs
to iPod.
Then, return to the
USB portable
audio player/USB
memory.
No songs in the Select a list that
current list
contains the
songs.
ERROR-23
USB device is
not formatted
with FAT16 or
FAT32
USB device should
be formatted with
FAT16 or FAT32.
Handling guideline of discs
and player
iPod
Message
Cause
Action
!
Use only discs featuring either of following
two logos.
ERROR-19
Communication Disconnect the
failure
cable from iPod.
Once iPod main
menu is displayed,
connect the cable
again.
Reset the iPod.
iPod failure
Disconnect the
cable from iPod.
Once iPod main
menu is displayed,
connect the cable
again.
!
Use only conventional, fully circular discs.
Do not use shaped discs.
Reset the iPod.
N/A USB
Old version of
iPod
Update the iPod
version.
!
!
!
Use 12-cm or 8-cm CD. Do not use an
adapter when playing 8-cm CDs.
Do not insert anything other than a CD into
the CD loading slot.
Do not use cracked, chipped, warped, or
otherwise damaged discs as they may da-
mage the player.
Unfinalized CD-R/CD-RW disc playback is
not possible.
Do not touch the recorded surface of the
discs.
iPod failure
Reset the iPod.
ERROR-16
Old version of
iPod
Update the iPod
version.
iPod failure
Disconnect the
cable from iPod.
Once iPod main
menu is displayed,
connect the cable
again.
!
!
!
Reset the iPod.
Store discs in their cases when not in use.
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
!
!
!
!
Avoid leaving discs in excessively hot envir-
onments including under direct sunlight.
Do not attach labels, write on or apply che-
micals to the surface of the discs.
To clean a CD, wipe the disc with a soft
cloth outward from the center.
Condensation may temporarily impair the
player’s performance. Leave it to adjust to
the warmer temperature for about one
hour. Also, wipe any dump discs with a soft
cloth.
Compressed audio
compatibility
WMA
!
Compatible format: WMA encoded by
Windows Media Player
!
Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps
to 384 kbps (VBR)
!
!
Sampling frequency: 32 kHz to 48 kHz
Windows Media Audio 9 Professional, Loss-
less, Voice: No
!
!
Playback of discs may not be possible be-
cause of disc characteristics, disc format,
recorded application, playback environ-
ment, storage conditions, and so on.
Text information may not be correctly dis-
played depending on the recorded environ-
ment.
Road shocks may interrupt disc playback.
Read the precautions for discs before
using them.
MP3
!
!
Bit rate: 8 kbps to 320 kbps
Sampling frequency: 16 kHz to 48 kHz (32,
44.1, 48 kHz for emphasis)
!
Compatible ID3 tag version: 1.0, 1.1, 2.2,
2.3, 2.4 (ID3 tag Version 2.x is given priority
than Version 1.x.)
!
!
!
!
M3u playlist: No
MP3i (MP3 interactive), mp3 PRO: No
AAC
!
Compatible format: AAC encoded by
iTunes®
Dual Discs
!
!
!
Sampling frequency: 11.025 kHz to 48 kHz
Transmission rate: 16 kbps to 320 kbps
Apple Lossless: No
!
Dual Discs are two-sided discs that have a
recordable CD for audio on one side and a
recordable DVD for video on the other.
Since the CD side of Dual Discs is not phy-
sically compatible with the general CD
standard, it may not be possible to play the
CD side with this unit.
!
WAV
!
!
!
Compatible format: Linear PCM (LPCM),
MS ADPCM
Quantization bits: 8 and 16 (LPCM), 4 (MS
ADPCM)
Sampling frequency: 16 kHz to 48 kHz
(LPCM), 22.05 kHz to 44.1 kHz (MS AD-
PCM)
!
!
Frequent loading and ejecting of a Dual
Disc may result in scratches on the disc.
Serious scratches can lead to playback pro-
blems on this unit. In some cases, a Dual
Disc may become stuck in the disc loading
slot and will not eject. To prevent this, we
recommend you refrain from using Dual
Disc with this unit.
USB audio player/USB memory
USB audio player/USB memory
compatibility
Please refer to the information from the
disc manufacturer for more detailed infor-
mation about Dual Discs.
!
!
!
USB version: 2.0, 1.1 and 1.0
USB data transfer rate: full speed
USB Class: MSC (Mass Storage Class) de-
vice
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
!
!
!
!
!
Protocol: bulk
!
!
Depending on the USB devices connected
to this unit, it may generate noise in the
radio.
Only 32 characters from the beginning can
be displayed as a file name (including the
extension) or a folder name when USB por-
table audio player/USB memory is selected
as a source.
Minimum amount of memory: 250 MB
Maximum amount of memory: 250 GB
File system: FAT32 and FAT16
Supply current: 500 mA
Notes
!
!
Partitioned USB memory is not compatible
with this unit.
!
The text information of some audio files
may not be correctly displayed.
Depending on the kind of USB portable audio
player/USB memory you use, this unit may
not recognize the USB audio player/USB
memory or audio files may not be played back
properly.
This unit can play back files in the USB porta-
ble audio player/USB memory that is USB
Mass Storage Class. However, copyright pro-
tected files that are stored in above-mentioned
USB devices cannot be played back. (If the
iPod is connected to this unit, file playback
condition depends on the iPod specifications.)
You cannot connect a USB portable audio
player/USB memory to this unit via a USB
hub.
!
!
File extensions must be used properly.
Up to 15 000 files on a USB portable audio
player/USB memory can be played back.
Up to 500 folders on a USB portable audio
player/USB memory can be played back.
Up to eight tiers directory on a USB porta-
ble audio player/USB memory can be
played back.
There may be a slight delay when starting
playback of audio files on a USB portable
audio player/USB memory with numerous
folder hierarchies.
Do not connect anything other than the
USB portable audio player/USB memory.
Operations may vary depending on the
kind of USB audio player and a USB mem-
ory.
!
!
!
!
!
!
!
Handling guideline and
supplemental information
The sequence of audio files on USB
memory
For USB portable audio players, the sequence is
different from that of USB memory and de-
pends on the player.
!
Do not leave the USB portable audio
player/USB memory in direct sunlight for
extended amounts of time. Extended expo-
sure to direct sunlight can result in USB
portable audio player/USB memory mal-
function due to the resulting high tempera-
ture.
!
!
Do not leave the USB portable audio
player/USB memory in high temperature.
Firmly secure the USB portable audio
player/USB memory when driving. Do not
let the USB portable audio player/USB
memory fall onto the floor, where it may be-
come jammed under the brake or accelera-
tor pedal.
!
There may be a slight delay when starting
playback of audio files encoded with image
data.
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Example of a hierarchy
: Folder
: Compressed audio file
!
!
!
Do not leave the iPod in a high tempera-
ture.
Connect directly the dock connector cable
to the iPod so that this unit works properly.
Firmly secure the iPod when driving. Do
not let the iPod fall onto the floor, where it
may become jammed under the brake or
accelerator pedal.
1
2
!
For details, refer to the iPod’s manuals.
3
4
About iPod settings
5
!
You cannot operate the iPod Equalizer on
6
Pioneer products. We recommend that you
set the iPod Equalizer to off, before con-
necting to this unit.
Level 1
Level 2 Level 3 Level 4
!
You cannot set Repeat to off on the iPod
when using this unit. Even if you set Repeat
to off on the iPod, Repeat is automatically
changed to All when connecting the iPod
to this unit.
!
01 to 05 represent assigned folder num-
bers. 1 to 6 represent the playback se-
quence. The user cannot assign folder
numbers and specify the playback se-
quence with this unit.
!
!
Playback sequence of the audio file is the
same as recorded sequence in the USB de-
vice.
To specify the playback sequence, the fol-
lowing method is recommended.
Compressed audio files on
the disc
!
Depending on the version of Windows
Media Player used to encode WMA files,
album names and other text information
may not be correctly displayed.
1
Create the file name including numbers
that specify the playback sequence (e.g.,
001xxx.mp3 and 099yyy.mp3).
Put those files into a folder.
Record the folder containing files into the
USB device.
2
3
!
!
There may be a slight delay when starting
playback of WMA/AAC files encoded with
image data.
ISO 9660 Level 1 and 2 compliant. Romeo
and Joliet file systems are both compatible
with this player.
However, depending on the system environ-
ment, you cannot specify the file playback
sequence.
!
!
Multi-session playback is possible.
Compressed audio files are not compatible
with packet write data transfer.
iPod
!
Only 64 characters from the beginning can
be displayed as a file name (including the
extension such as .wma, .mp3, .m4a or
.wav) or a folder name.
Folder selection sequence or other opera-
tion may be altered depending on the en-
coding or writing software.
About handling the iPod
!
Do not leave the iPod in direct sunlight for
extended amounts of time. Extended expo-
sure to direct sunlight can result in iPod
malfunction due to the resulting high tem-
perature.
!
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
!
!
Regardless of the length of blank section
between the songs of original recording,
compressed audio discs play with a short
pause between songs.
File extensions such as .wma, .mp3, .m4a
or .wav must be used properly.
Example of a hierarchy
: Folder
: Compressed audio file
1
2
3
4
5
6
Level 1
Level 2 Level 3 Level 4
!
!
This unit assigns folder numbers. The user
cannot assign folder numbers.
Folder hierarchy is allowed up to eight tiers.
However, a practical hierarchy of folder is
less than two tiers.
!
Up to 99 folders on a disc can be played
back.
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Specifications
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch
audio)
General
(Windows Media Player)
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
AAC decoding format ............ MPEG-4 AAC (iTunes® en-
coded only) (.m4a)
Grounding system ................... Negative type
Max. current consumption
..................................................... 10.0 A
Dimensions (W × H × D):
DIN
(Ver. 7.2 and earlier)
WAV signal format .................. Linear PCM & MS ADPCM
(Non-compressed)
USB
Chassis ..................... 178 mm × 50 mm × 165
mm
Specification .............................. USB 2.0 full speed
Supply current .......................... 500 mA
Maximum amount of memory
(7 in. × 2 in. × 6-1/2 in.)
Nose ........................... 188 mm × 58 mm × 18 mm
(7-3/8 in.× 2-1/4 in.× 3/4 in.)
D
..................................................... 250 GB
File system .................................. FAT16, FAT32
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch
audio)
Chassis ..................... 178 mm × 50 mm × 165
mm
(7 in.× 2 in.× 6-1/2 in.)
(Windows Media Player)
Nose ........................... 170 mm × 45 mm × 18 mm
(6-3/4 in.× 1-3/4 in.× 3/4 in.)
Weight .......................................... 1.5 kg (3.3 lbs)
AAC decoding format ............ MPEG-4 AAC (iTunes® en-
coded only) (.m4a)
(Ver. 7.2 and earlier)
WAV signal format .................. Linear PCM & MS ADPCM
(Non-compressed)
Audio
Maximum power output ....... 50 W × 4
50 W × 2/4 W + 70 W × 1/2
W (for subwoofer)
FM tuner
Frequency range ...................... 87.9 MHz to 107.9 MHz
Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,
S/N: 30 dB)
Continuous power output ... 22 W × 4 (50 Hz to 15 000
Hz, 5% THD, 4 W load, both
channels driven)
Load impedance ...................... 4 W to 8 W × 4
4 W to 8 W × 2 + 2 W × 1
Preout max output level ....... 4 V
Equalizer (7-Band Graphic Equalizer):
Frequency .......................... 50/125/315/800/2k/5k/12.5k
Hz
Gain ...................................... 12 dB
HPF:
Frequency .......................... 50/63/80/100/125 Hz
Slope .................................... –12 dB/oct
Subwoofer (mono):
Signal-to-noise ratio ............... 75 dB (IHF-A network)
AM tuner
Frequency range ...................... 530 kHz to 1 710 kHz (10
kHz)
Usable sensitivity ..................... 18 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 65 dB (IHF-A network)
CEA2006 Specifications
Frequency .......................... 50/63/80/100/125 Hz
Slope .................................... –18 dB/oct
Gain ...................................... +6 dB to –24 dB
Phase .................................. Normal/Reverse
Bass boost:
Power output ............................. 14 W RMS × 4 Channels (4
Gain ...................................... +12 dB to 0 dB
W and ≦ 1 % THD+N)
S/N ratio ....................................... 91 dBA (reference: 1 W into
CD player
4 W)
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal-to-noise ratio ............... 94 dB (1 kHz) (IHF-A net-
work)
Note
Specifications and the design are subject to mod-
ifications without notice due to improvements.
Number of channels .............. 2 (stereo)
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU
TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
總公司 : 台北市中山北路二段44號13樓
電話 : (02) 2521-3588
先鋒電子（香港）有限公司
香港九龍尖沙咀海港城世界商業中心
9樓901-6室
Published by Pioneer Corporation.
Copyright © 2007 by Pioneer Corporation.
All rights reserved.
電話 : (0852) 2848-6488
<KOKZX> <07K00000>
<CRB2571-B/N> UC
Download from Www.Somanuals.com. All Manuals Search And Download.
|