Operation Manual
CD RDS RECEIVER
DEH-4400BT
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Before you start
01
Demo mode
Important
!
Failure to connect the red lead (ACC) of this
unit to a terminal coupled with ignition switch
on/off operations may lead to battery drain.
Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.
!
The demo starts automatically if you do not op-
erate this unit within about 30 seconds since
the unit was last operated or if the ignition
switch is set to ACC or ON while the unit is
turned off. To cancel the demo mode, you
need to display the initial settings. Select
demo display. For details, refer to Initial set-
In case of trouble
Should this unit fail to operate properly, please
contact your dealer or nearest authorized
PIONEER Service Station.
3
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Head unit
Operation is the same as when using the but-
tons on the head unit.
12 3 4
5
6
78 9 a
b
c de
Part
Part
(back/display)
c/d
1
2
h (eject)
(list)
8
9
Part
Operation
MULTI-CONTROL
(M.C.)
BAND/ (iPod con-
trol)
Press to display the phone menu.
Press and hold to display the con-
nection menu.
Press to reject an incoming call
or cancel making a call.
3
a
f
PHONE
4
5
SRC/OFF
b
c
1 to 6
Disc loading slot
PTY
While operating the phone, press
to end a call or reject an incoming
call.
AUX input jack
(3.5 mm stereo
jack)
/CAN-
CEL
g
h
6
7
USB port
d
e
Press to perform manual seek
tuning, fast forward, reverse and
track search controls. Also used
for controlling functions.
(phone/on
hook)
Detach button
a/b/c/d
CAUTION
Press to start talking on the
phone while operating a phone.
Press to switch between callers
on hold.
!
Use an optional Pioneer USB cable (CD-U50E)
to connect the USB audio player/USB mem-
ory as any device connected directly to the
unit will protrude out from the unit and may
be dangerous.
i
j
/START
Press to increase or decrease vo-
lume.
VOLUME
!
Do not use unauthorized products.
Optional remote control
The remote control CD-SR110 is sold separately.
Display indication
1
3 5
2 4
7
9 b
8 a
6
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
2
Turn M.C. to switch to YES. Press M.C.
Indicator
State
to select.
!
!
Tuner: band and frequency
#
If you do not operate for 30 seconds, the set
RDS: program service name,
PTY information and other lit-
eral information
Built-in CD, USB storage de-
vice and iPod: elapsed play-
back time and text
up menu will not be displayed.
#
M.C. to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
If you prefer not to set up at this time, turn
Main dis-
play sec-
tion
1
!
information
3
Perform the following procedures to
The list function is being oper-
ated.
set the menu.
To proceed to the next menu option, you need
to confirm your selection.
2
3
(list)
(iPod
control)
This unit’s iPod function is oper-
ated from your iPod.
CLOCK SET (setting the clock)
4
5
6
7
LOC
(TA)
(TP)
Local seek tuning is on.
TA function is on.
1
2
3
4
Turn M.C. to adjust hour.
Press M.C. to select minute.
Turn M.C. to adjust minute.
Press M.C. to confirm the selection.
A TP station is tuned in.
(repeat) Track or folder repeat is on.
Random play is on.
(ran-
FM STEP (FM tuning step)
The iPod source is selected and
8
dom/shuf-
fle)
Normally, the FM tuning step employed by seek tun-
ing is 50 kHz. When AF or TA is on, the tuning step
automatically changes to 100 kHz. It may be prefer-
able to set the tuning step to 50 kHz when AF is on.
the shuffle or shuffle all function
is on.
(auto
answer)
Shows when the automatic an-
swering function is on.
9
a
!
The tuning step remains at 50 kHz during manual
tuning.
Connected to a Bluetooth device.
The line is on hold.
1
2
Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
Press M.C. to confirm the selection.
(Bluetooth
indicator)
The sound retriever function is
on.
DEMO (demo display setting)
b
(sound re-
triever)
1
2
Turn M.C. to set the demo display to on or off.
Press M.C. to confirm the selection.
TITLE (multi-language)
This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
Set up menu
When you turn the ignition switch to ON after
installation, set up menu appears on the dis-
play.
!
If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
You can set up the menu options below.
!
1
Some characters may not be displayed properly.
Turn M.C. to select the desired setting.
EUR (European)—RUS (Russian)
1
After installation of this unit, turn the
2
Press M.C. to confirm the selection.
QUIT appears.
ignition switch to ON.
SET UP appears.
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
4
To finish your settings, turn M.C. to se-
Removing the front panel to protect your unit from
theft
lect YES. Press to select.
If you prefer to change your setting again, turn
#
1
Press the detach button to release the front
panel.
M.C. to switch to NO. Press to select.
2
Push the front panel upward (M) and then pull it
toward (N) you.
Notes
!
!
You can set up the menu options in the initial
settings. For details about the settings, refer to
You can cancel set up menu by pressing SRC/
OFF.
3
Always keep the detached front panel in a protec-
tion device such as a protection case.
Basic operations
Re-attaching the front panel
Important
1
Slide the front panel to the left.
Make sure to insert the tabs on the left side of the
head unit into the slots on the front panel.
!
!
!
!
Handle gently when removing or attaching
the front panel.
Avoid subjecting the front panel to excessive
shock.
Keep the front panel out of direct sunlight and
high temperatures.
To avoid damaging the device or vehicle inter-
ior, remove any cables and devices attached
to the front panel before detaching it.
2
Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the head
unit successfully, make sure that you are placing
the front panel onto the head unit correctly. For-
cing the front panel into place may result in da-
mage to the front panel or head unit.
Turning the unit on
Press SRC/OFF to turn the unit on.
1
Turning the unit off
Press and hold SRC/OFF until the unit turns off.
1
Selecting a source
1
Press SRC/OFF to cycle between:
TUNER (tuner)—CD (built-in CD player)—USB
(USB)/iPod (iPod)—AUX (AUX)—BT AUDIO
(Bluetooth audio)
Adjusting the volume
1
Turn M.C. to adjust the volume.
CAUTION
For safety reasons, park your vehicle when remov-
ing the front panel.
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
Note
Rejecting an incoming call
When a call is received, press
When this unit’s blue/white lead is connected to
the vehicle’s auto-antenna relay control terminal,
the vehicle’s antenna extends when this unit’s
source is turned on. To retract the antenna, turn
the source off.
1
.
Answering a call waiting
When a call is received, press M.C.
1
Switching between callers on hold
Press M.C.
1
Canceling call waiting
Press
1
.
Using Bluetooth telephone
Adjusting the other party’s listening volume
Important
1
Press c or d while talking on the phone.
When private mode is on, this function is not
available.
!
!
Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.
Turning private mode on or off
Press BAND/ while talking on the phone.
1
!
!
Operations may vary depending on the kind of
cellular phone.
Switching the information display
Press while talking on the phone.
1
Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe place
when using these advanced operations.
Notes
!
!
If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
Menu operations identical
for set up menu/function
settings/audio adjustments/
initial settings/lists
1
Connection
Operate the Bluetooth telephone connection
2
Function settings
Returning to the previous display
Returning to the previous list (the folder one level
higher)
Operate the Bluetooth telephone function menu.
1
Press
.
Returning to the ordinary display
Canceling the initial setting menu/set up menu
Basic operations
1
Press BAND/
.
Making a phone call
Returning to the ordinary display from the list
1
1
Press BAND/
.
Answering an incoming call
1
When a call is received, press M.C.
Ending a call
1
Press
.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Tuner
Switching the RDS display
%
Press
.
Basic operations
Program service name—PTY information—En-
tertainment—Frequency
Selecting a band
1
Press BAND/ until the desired band (FM1,
FM2,FM3 for FM or MW/LW) is displayed.
#
PTY information and the frequency appear on
the display for eight seconds.
Depending on the band, text information can
#
Recalling preset stations
be changed.
1
!
Press c or d.
If MAN (manual tuning) is selected in SEEK, you
cannot recall preset stations. You need to select
PCH (preset channel) in SEEK. For details about
Using PTY functions
You can tune in to a station using PTY (pro-
gram type) information.
Manual tuning (step by step)
Searching for an RDS station by PTY information
You can search for general types of broadcasting pro-
grams, such as those listed in the following section.
Refer to this page.
1
!
Press c or d.
If PCH (preset channel) is selected in SEEK, you
cannot tune up or down manually. You need to se-
lect MAN (manual tuning) in SEEK. For details
1
2
Press PTY.
Turn M.C. to select a program type.
NEWS/INFO—POPULAR—CLASSICS—OTHERS
Press M.C. to begin the search.
Seeking
Press and hold c or d, and then release.
3
1
The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
You can cancel seek tuning by briefly pressing c
or d.
While pressing and holding c or d, you can skip
stations. Seek tuning starts as soon as you re-
lease c or d.
PTY (program type ID code) information is listed
in the following section. Refer to this page.
!
!
To cancel the search, press M.C. again.
The program of some stations may differ from
that indicated by the transmitted PTY.
Note
This unit’s AF (alternative frequencies search)
function can be turned on and off. AF should be
!
If no station is broadcasting the type of pro-
gram you searched for, NOT FOUND is dis-
played for about two seconds and then the
tuner returns to the original station.
PTY list
Storing and recalling stations
for each band
NEWS/INFO
Using preset tuning buttons
NEWS (News), AFFAIRS (Current affairs), INFO (Infor-
mation), SPORT (Sports), WEATHER (Weather), FI-
NANCE (Finance)
1
When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
POPULAR
POP MUS (Popular music), ROCK MUS (Rock
music), EASY MUS (Easy listening), OTH MUS
(Other music), JAZZ (Jazz), COUNTRY (Country
music), NAT MUS (National music), OLDIES (Oldies
music), FOLK MUS (Folk music)
2
Press one of the preset tuning buttons
(1 to 6) to select the desired station.
CLASSICS
L. CLASS (Light classical), CLASSIC (Classical)
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
OTHERS
You can tune in to a station using PTY (program type)
information.
EDUCATE (Education), DRAMA (Drama), CULTURE
(Culture), SCIENCE (Science), VARIED (Varied), CHIL-
DREN (Children’s), SOCIAL (Social affairs), RELIGION
(Religion), PHONE IN (Phone in), TOURING (Travel),
LEISURE (Leisure), DOCUMENT (Documentaries)
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the desired setting.
NEWS/INFO—POPULAR—CLASSICS—OTHERS
Press M.C. to begin the search.
3
The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
For PTY (program type ID code) information, refer
Function settings
1
Press M.C. to display the main menu.
The program of some stations may differ from
that indicated by the transmitted PTY.
If no station is broadcasting the type of program
you searched for, NOT FOUND is displayed for
about two seconds and then the tuner returns to
the original station.
2
Turn M.C. to change the menu option
and press to select FUNCTION.
Turn M.C. to select the function.
3
After selecting, perform the following proce-
dures to set the function.
TA (traffic announcement standby)
#
If MW/LW band is selected, only BSM, LOCAL
1
Press M.C. to turn traffic announcement standby
on or off.
and SEEK are available.
AF (alternative frequencies search)
BSM (best stations memory)
1
Press M.C. to turn AF on or off.
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
NEWS (news program interruption)
1
Press M.C. to turn BSM on.
To cancel, press M.C. again.
1
Press M.C. to turn the NEWS function on or off.
SEEK (left/right key setting)
REGION (regional)
You can assign a function to the left and right keys of
the unit.
Select MAN (manual tuning) to tune up or down
manually or select PCH (preset channel) to switch be-
tween preset channels.
When AF is used, the regional function limits the se-
lection of stations to those broadcasting regional pro-
grams.
1
Press M.C. to turn the regional function on or off.
1
Press M.C. to select MAN or PCH.
LOCAL (local seek tuning)
Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1
Press M.C. to select the desired setting.
FM: OFF—LV1—LV2—LV3—LV4
MW/LW: OFF—LV1—LV2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
CD/CD-R/CD-RW and USB
storage devices
Basic operations
Playing a CD/CD-R/CD-RW
PTY SEARCH (program type selection)
1
Insert the disc into the disc loading slot with the
label side up.
Ejecting a CD/CD-R/CD-RW
Press h.
1
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Selecting and playing files/
tracks from the name list
Playing songs on a USB storage device
1
2
Open the USB port cover.
Plug in the USB storage device using a USB
cable.
1
Press
to switch to the file/track
A song will be played automatically.
name list mode.
Stopping playback of files on a USB storage device
2
Use M.C. to select the desired file name
1
You may disconnect the USB storage device at
any time.
(or folder name).
The unit stops playback.
Changing the file or folder name
Selecting a folder
Press 1/ or 2/
1
Turn M.C.
1
.
Playing
Selecting a track
Press c or d.
1
When a file or track is selected, press M.C.
1
Viewing a list of the files (or folders) in the selected
folder
Fast forwarding or reversing
1
!
Press and hold c or d.
When playing compressed audio, there is no
sound during fast forward or reverse.
1
When a folder is selected, press M.C.
Playing a song in the selected folder
1
When a folder is selected, press and hold M.C.
Returning to root folder
Press and hold BAND/
1
.
Switching between compressed audio and CD-DA
Press BAND/
Advanced operations using
special buttons
1
.
Switching between playback memory devices
You can switch between playback memory devices on
USB storage devices with more than one Mass Sto-
rage Device-compatible memory device.
Selecting a repeat play range
1
Press 6/
to cycle between the following:
CD/CD-R/CD-RW
1
!
Press BAND/
You can switch between up to 32 different mem-
ory devices.
.
!
!
!
ALL – Repeat all tracks
ONE – Repeat the current track
FLD – Repeat the current folder
USB audio player/USB memory
Note
!
!
!
ALL – Repeat all files
ONE – Repeat the current file
FLD – Repeat the current folder
Disconnect USB storage devices from the unit
when not in use.
Playing tracks in random order
1
Press 5/
to turn random play on or off.
Displaying text information
Tracks in a selected repeat range are played in
random order.
To change songs during random play, press d to
switch to the next track. Pressing c restarts play-
back of the current track from the beginning of
the song.
Selecting the desired text information
!
1
!
Press
.
Depending on the version of iTunes used to write
MP3 files to a disc or media file types, incompati-
ble text stored within an audio file may be dis-
played incorrectly.
Pausing playback
Press 4/PAUSE to pause or resume.
1
!
Text information items that can be changed de-
pend on the media.
Enhancing compressed audio and restoring rich
sound (sound retriever)
1
Press 3/S.Rtrv to cycle between:
1—2—OFF (off)
1 is effective for low compression rates, and 2 is
effective for high compression rates.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
Function settings
02
Selecting an album
1
!
Press 1/ or 2/
.
1
Press M.C. to display the main menu.
The album may not be selected correctly if the
iPod has more than one album with the same
title on it. Select the album you want to listen to
using list search. For details, refer to Browsing for
2
Turn M.C. to change the menu option
and press to select FUNCTION.
Turn M.C. to select the function.
3
Fast forwarding or reversing
Press and hold c or d.
After selecting, perform the following proce-
dures to set the function.
1
Notes
REPEAT (repeat play)
!
!
!
The iPod cannot be turned on or off when the
1
Press M.C. to select a repeat play range.
control mode is set to CTRL AUDIO.
Disconnect headphones from the iPod before
connecting it to this unit.
The iPod will turn off about two minutes after
the ignition switch is set to OFF.
RANDOM (random play)
1
Press M.C. to turn random play on or off.
PAUSE (pause)
Displaying text information
1
Press M.C. to pause or resume.
Selecting the desired text information
S.RTRV (sound retriever)
1
Press
.
Automatically enhances compressed audio and re-
stores rich sound.
1
Press M.C. to select the desired setting.
For details, refer to Enhancing compressed audio
Browsing for a song
1
Press
to switch to the top menu of
list search.
2
Use M.C. to select a category/song.
Changing the name of the song or category
1
Turn M.C.
iPod
Basic operations
Playlists—artists—albums—songs—podcasts—
genres—composers—audiobooks
Playing
Playing songs on an iPod
1
When a song is selected, press M.C.
1
2
Open the USB port cover.
Connect an iPod to the USB cable using an iPod
Dock Connector.
Viewing a list of songs in the selected category
1
When a category is selected, press M.C.
A song will be played automatically.
Playing a song in the selected category
1
When a category is selected, press and hold M.C.
Selecting a song (chapter)
Press c or d.
1
Searching the list by alphabet
1
When a list for the selected category is displayed,
press to switch to alphabet search mode.
!
You also can switch to alphabet search mode
by turning M.C. twice.
2
3
Turn M.C. to select a letter.
Press M.C. to display the alphabetical list.
!
To cancel searching, press
.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Notes
!
!
ALBUM – Plays a song from the album cur-
rently being played.
GENRE – Plays an album from the genre
currently being played.
!
You can play playlists created with the PC ap-
plication (MusicSphere). The application will
be available on our website.
The selected song/album will be played after
the currently playing song.
!
Playlists that you created with the PC applica-
tion (MusicSphere) are displayed in abbre-
viated form.
Notes
!
The selected song/album may be canceled if
you operate functions other than link search
(e.g. fast forward and reverse).
Advanced operations using
special buttons
!
Depending on the song selected to play, the
end of the currently playing song and the be-
ginning of the selected song/album may be
cut off.
Selecting a repeat play range
1
Press 6/
to cycle between the following:
OFF – Repeat off
ONE – Repeat the current song
ALL – Repeat all songs in the selected list
!
!
!
!
You cannot select OFF when CTRL AUDIO is se-
Operating this unit’s iPod
function from your iPod
You can listen to the sound from your iPod ap-
plications using your car’s speakers, when
CTRL APP is selected.
Playing all songs in random order (shuffle all)
1
!
Press 5/
to turn shuffle all on.
When the control mode is set to CTRL iPod/CTRL
APP, shuffle play is on.
!
This function is not compatible with iPod
nano 1st generation.
Pausing playback
Press 4/PAUSE to pause or resume.
APP Mode is compatible with the following
iPod models.
1
Enhancing compressed audio and restoring rich
sound (sound retriever)
!
!
!
!
!
iPhone 4 (software version 4.1 or later)
iPhone 3GS (software version 3.0 or later)
iPhone 3G (software version 3.0 or later)
iPhone (software version 3.0 or later)
iPod touch 4th generation (software version
4.1 or later)
1
Press 3/S.Rtrv to cycle between:
1—2—OFF (off)
1 is effective for low compression rates, and 2 is
effective for high compression rates.
!
!
!
iPod touch 3rd generation (software version
3.0 or later)
iPod touch 2nd generation (software ver-
sion 3.0 or later)
iPod touch 1st generation (software version
3.0 or later)
Playing songs related to the
currently playing song
You can play songs from the following lists.
• Album list of the currently playing artist
• Song list of the currently playing album
• Album list of the currently playing genre
%
Press BAND/ to switch the control
mode.
1
Press and hold M.C. to switch to link
!
!
!
CTRL iPod – This unit’s iPod function can
play mode.
be operated from the connected iPod.
CTRL APP – Play back the sound from your
iPod applications.
2
Turn M.C. to change the mode; press to
select.
!
ARTIST – Plays an album of the artist cur-
CTRL AUDIO – This unit’s iPod function
can be operated from this unit.
rently being played.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
Notes
1
2
Press M.C. to display the setting mode.
Turn M.C. to change the mode; press to select.
For details about the settings, refer to Playing
!
Switching the control mode to CTRL iPod/
CTRL APP pauses song playback. Operate the
iPod to resume playback.
!
The following functions are still accessible
from the unit even if the control mode is set to
CTRL iPod/CTRL APP.
PAUSE (pause)
— Pausing
1
Press M.C. to pause or resume.
— Fast forward/reverse
— Selecting a song (chapter)
AUDIO BOOK (audiobook speed)
!
When the control mode is set to CTRL iPod,
operations are limited as follows:
— The function settings are not available.
— The browse function cannot be operated
from this unit.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select your favorite setting.
!
FASTER – Playback at a speed faster than nor-
mal
!
!
NORMAL – Playback at normal speed
SLOWER – Playback at a speed slower than
normal
3
Press M.C. to confirm the selection.
Function settings
S.RTRV (sound retriever)
1
Press M.C. to display the main menu.
Automatically enhances compressed audio and re-
stores rich sound.
1
2
Turn M.C. to change the menu option
Press M.C. to select the desired setting.
For details, refer to Enhancing compressed audio
and press to select FUNCTION.
Turn M.C. to select the function.
3
After selecting, perform the following proce-
dures to set the function.
!
When the control mode is set to CTRL iPod/
CTRL APP, only PAUSE or S.RTRV is avail-
able.
REPEAT (repeat play)
1
Press M.C. to select a repeat play range.
SHUFFLE (shuffle)
1
Press M.C. to select your favorite setting.
!
!
!
SNG – Play back songs in the selected list in
random order.
ALB – Play back songs from a randomly se-
lected album in order.
OFF – Cancel random play.
SHUFFLE ALL (shuffle all)
1
Press M.C. to turn shuffle all on.
To turn off, set SHUFFLE in the FUNCTION menu
to off.
LINK PLAY (link play)
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Using Bluetooth wireless
technology
1
2
Press M.C. to start searching.
To cancel, press M.C. while searching.
Turn M.C. to select a device from the device list.
!
!
!
If the desired device is not displayed, select
RE-SEARCH.
6-digit number appears on the display of this
unit. Once the connection is established, this
number disappears.
Connection menu operation
Important
!
!
Be sure to park your vehicle in a safe place
and apply the parking brake when performing
this operation.
Connected devices may not operate properly if
more than one is connected at a time. Con-
necting one device at a time is recommended.
!
Press and hold M.C. to switch the Bluetooth
device address and device name.
3
Press M.C. to connect the selected device.
!
To complete the connection, check the device
name (DEH-4400BT) and enter the PIN code
on your device.
PIN code is set to 0000 as the default. You
can change this code.
If you are unable to complete the connection
using this unit, use the device to connect to
the unit.
If 3 devices are already paired, DEVICEFULL is
displayed and it is not possible to perform this
operation. In this case, delete a paired device
first.
1
Press and hold
to display the con-
!
!
nection menu.
#
You cannot operate this step during a call.
2
Turn M.C. to select the function.
!
After selecting, perform the following proce-
dures to set the function.
!
When the control mode is set to CTRL iPod/
CTRL APP, only PAUSE or S.RTRV is avail-
able.
SPCLDEVICE (setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your
Bluetooth device is listed as a special device, select
the appropriate one.
DEVICELIST (connecting or disconnecting a device
from the device list)
!
When no device is selected in the device list, this
function is not available.
1
Press M.C. to display the setting mode.
!
If 3 devices are already paired, DEVICEFULL is
displayed and it is not possible to perform this
operation. In this case, delete a paired device
first.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the name of a device you want
to connect/disconnect.
!
Press and hold M.C. to switch the Bluetooth
device address and device name.
2
3
4
Turn M.C. to display a special device. Press to se-
lect.
Turn M.C. to display this unit’s device name,
Bluetooth device address and PIN code.
Use a device to connect to this unit.
3
Press M.C. to connect/disconnect the selected de-
vice.
If the connection is established, * is indicated on
the device name.
!
To complete the connection, check the device
name (DEH-4400BT) and enter the PIN code
on your device.
DEL DEVICE (deleting a device from the device list)
!
PIN code is set to 0000 as the default. You
can change this code.
!
When no device is selected in the device list, this
function is not available.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the name of a device you want
to delete.
A. CONN (connecting to a Bluetooth device automati-
cally)
!
Press and hold M.C. to switch the Bluetooth
device address and device name.
1
Press M.C. to turn automatic connection on or
off.
3
4
Press M.C. to display DELETE YES.
Press M.C. to delete a device information from
the device list.
VISIBLE (setting the visibility of this unit)
!
While this function is in use, do not turn off the
engine.
ADD DEVICE (connecting a new device)
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
tening to songs on your Bluetooth audio
player.
To check the availability of this unit from other de-
vices, Bluetooth visibility of this unit can be turned
on.
!
When a call is in progress on the cellular
phone connected to this unit via Bluetooth
wireless technology, the sound of the
Bluetooth audio player connected to this unit
is muted.
When the Bluetooth audio player is in use,
you cannot connect to a Bluetooth telephone
automatically.
1
Press M.C. to turn the visibility of this unit on or
off.
!
While setting SPCLDEVICE, Bluetooth visibility
of this unit is turned on temporarily.
PIN CODE (PIN code input)
!
!
To connect your device to this unit via Bluetooth wire-
less technology, you need to enter a PIN code on your
device to verify the connection. The default code is
0000, but you can change it with this function.
Playback continues even if you switch from
your Bluetooth audio player to another source
while listening to a song.
1
2
3
Press M.C. to display the setting mode.
Turn M.C. to select a number.
Press M.C. to move the cursor to the next posi-
tion.
Even though your audio player does not con-
tain a Bluetooth module, you can still control
it from this unit via Bluetooth wireless technol-
ogy using a Bluetooth adapter (sold sepa-
rately).
4
After inputting PIN code, press and hold M.C.
!
After inputting, pressing M.C. returns you to
the PIN code input display, and you can
change the PIN code.
DEV. INFO (Bluetooth device address display)
Setting up for Bluetooth audio
1
2
Press M.C. to display the setting mode.
Turn M.C. left to switch to the Bluetooth device
address.
Before you can use the Bluetooth audio func-
tion you must set up the unit for use with your
Bluetooth audio player. This entails establish-
ing a Bluetooth wireless connection between
this unit and your Bluetooth audio player, and
pairing your Bluetooth audio player with this
unit.
Turning M.C. right returns to the device name.
Bluetooth Audio
Important
!
!
Depending on the Bluetooth audio player con-
nected to this unit, the available operations
will be limited to the following two levels:
— A2DP profile (Advanced Audio Distribution
Profile): You can only playback songs on
your audio player.
— AVRCP profile (Audio/Video Remote Con-
trol Profile): You can perform playback,
pause playback, select songs, etc.
Since there are a number of Bluetooth audio
players available on the market, available op-
erations will vary extensively. When operating
your player with this unit, refer to the instruc-
tion manual that came with your Bluetooth
audio player as well as this manual.
Information related to a song (such as the
elapsed playing time, song title, song index,
etc.) cannot be displayed on this unit.
As the signal from your cellular phone may
cause noise, avoid using it when you are lis-
Basic operations
Fast forwarding or reversing
1
Press and hold c or d.
Selecting a track
1
Press c or d.
Starting playback
1
Press BAND/
.
Function settings
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select FUNCTION.
Turn M.C. to select the function.
!
!
3
After selecting, perform the following proce-
dures to set the function.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
PLAY (play)
!
!
The phone book in your cellular phone will be
transferred automatically when the phone is con-
nected to this unit.
Depending on the cellular phone, the phone book
may not be transferred automatically. In this case,
operate your cellular phone to transfer the phone
book. The visibility of this unit should be on. Refer
1
Press M.C. to start playback.
STOP (stop)
1
Press M.C. to stop the playback.
PAUSE (pause)
1
Press M.C. to turn pause on.
1
2
Press M.C. to display SEARCH (alphabetical list).
Turn M.C. to select the first letter of the name you
are looking for.
!
Press and hold M.C. to select the desired
character type.
TOP (alphabet)–ΟΛΑ (Greek alphabet)–ВСЕ
(Cyrillic alphabet)
Phone menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
3
4
5
6
Press M.C. to display a registered name list.
Turn M.C. to select the name you are looking for.
Press M.C. to display the phone number list.
Turn M.C. to select a phone number you want to
call.
1
Press
to display the phone menu.
!
When you find a phone number that you want
to store in memory, press and hold one of the
preset tuning buttons (1 to 6).
Press one of preset buttons 1 to 6 to recall the
desired preset number.
#
When PW SAVE is on, you cannot display the
phone menu. For details about the settings, refer
!
2
Turn M.C. to select the function.
7
Press M.C. to make a call.
After selecting, perform the following proce-
dures to set the function.
PRESET 1-6 (preset phone numbers)
1
2
Press M.C. to display the setting mode.
Use M.C. to select the desired preset number.
Turn to change the menu option. Press to select.
MISSED (missed call history)
DIALLED (dialed call history)
RECEIVED (received call history)
!
You can also press one of the preset number
buttons 1 to 6 to select a number.
Press M.C. to make a call.
1
2
Press M.C. to display the phone number list.
Turn M.C. to select a name or phone number.
3
!
When you find a phone number that you want
to store in memory, press and hold one of the
preset tuning buttons (1 to 6).
Press one of preset buttons 1 to 6 to recall the
desired preset number.
PHONE FUNC (phone function)
You can set A. ANSR and R.TONE from this menu.
!
3
Press M.C. to make a call.
PHONE BOOK (phone book)
Function and operation
1
Display PHONE FUNC.
2
Press M.C. to display the function
menu.
3
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
A. ANSR (automatic answering)
Loudness compensates for deficiencies in the low-fre-
quency and high-frequency ranges at low volume.
1
Press M.C. to turn automatic answering on or off.
1
Press M.C. to select the desired setting.
OFF (off)—LOW(low)—HI (high)
R.TONE (ring tone select)
SUB.W (subwoofer on/off setting)
1
Press M.C. to turn the ring tone on or off.
This unit is equipped with a subwoofer output which
can be turned on or off.
PB INVT (phone book name view)
1
Press M.C. to select the desired setting.
NOR (normal phase)—REV (reverse phase)—OFF
(subwoofer off)
1
Press M.C. to switch between the lists of names.
SUB.W CTRL (subwoofer adjustment)
The cut-off frequency and output level can be ad-
justed when the subwoofer output is on.
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
Audio adjustments
1
Press M.C. to display the main menu.
!
When you select OFF in SUB.W, you cannot select
2
Turn M.C. to change the menu option
and press to select AUDIO.
Turn M.C. to select the audio function.
1
2
Press M.C. to display the setting mode.
Press M.C. to cycle between the cut-off frequency
and output level of the subwoofer.
Cut-off frequency (Cut-off frequency display
flashes.)—Output level (Output level display
flashes.)
3
After selecting, perform the following proce-
dures to set the audio function.
FAD/BAL (fader/balance adjustment)
3
Turn M.C. to select the desired setting.
Cut-off frequency: 50HZ—63HZ—80HZ—100HZ
—125HZ
1
2
Press M.C. to display the setting mode.
Press M.C. to cycle between fader (front/rear) and
balance (left/right).
Output level: –24 to +6
3
!
Turn M.C. to adjust speaker balance.
When the rear output and RCA output setting are
SW, you cannot adjust front/rear speaker balance.
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
!
!
!
Settings are based on the FM volume level, which
remains unchanged.
The MW/LW volume level can also be adjusted
with this function.
When selecting FM as the source, you cannot
switch to SLA.
PRESET EQ (equalizer recall)
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the equalizer.
DYNAMIC—VOCAL—NATURAL—CUSTOM—
FLAT—POWERFUL
1
2
Press M.C. to display the setting mode.
Turn M.C. to adjust the source volume.
Adjustment range: +4 to –4
3
Press M.C. to confirm the selection.
3
Press M.C. to confirm the selection.
TONE CTRL (equalizer adjustment)
!
Adjusted equalizer curve settings are stored in
CUSTOM.
1
2
Press M.C. to display the setting mode.
Press M.C. to select BASS (bass)/MID (mid)/TRE-
BLE (treble).
3
Turn M.C. to adjust the level.
Adjustment range: +6 to –6
LOUD (loudness)
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Initial settings
Activate this setting when using an auxiliary device
connected to this unit.
Important
1
Press M.C. to turn AUX on or off.
PW SAVE (power saving) is cancelled if the vehi-
cle battery is disconnected and will need to be
turned back on once the battery is reconnected.
When PW SAVE (power saving) is off, depending
on connection methods, the unit may continue to
draw power from the battery if your vehicle’s igni-
tion doesn’t have an ACC (accessory) position.
USB PNP (plug and play)
This setting allows you to switch your source to USB/
iPod automatically.
1
Press M.C. to turn the plug and play function on
or off.
ON – When a USB storage device/iPod is con-
nected, depending on the type of device, the
source is automatically switched to USB/iPod
when you turn on the engine. If you disconnect
your USB storage device/iPod, this unit’s source
is turned off.
OFF – When a USB storage device/iPod is con-
nected, the source is not switched to USB/iPod
automatically. Please change the source to USB/
iPod manually.
1
Press and hold SRC/OFF until the unit
turns off.
2
Press SRC/OFF and hold until function
name appears in the display.
3
Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
REAR-SP (rear output setting)
The rear speaker leads output can be used for full-
range speaker or subwoofer connection.
If you switch to SW, you can connect a rear speaker
lead directly to a subwoofer without using an auxiliary
amp.
CLOCK SET (setting the clock)
1
2
Press M.C. to display the setting mode.
Press M.C. to select the segment of the clock dis-
play you wish to set.
Initially, REAR-SP is set for rear full-range speaker
connection (FUL).
Hour—Minute
3
Turn M.C. to adjust the clock.
1
Press M.C. to select the desired setting.
FUL—SW
!
CLOCK (clock display)
Even if you change this setting, there will be
no output if you select OFF in SUB.W (Refer to
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
You can turn the clock display on or off.
The clock display disappears temporarily when you
perform other operations, but the clock display ap-
pears again after 25 seconds.
!
1
Press M.C. to turn the clock display on or off.
FM STEP (FM tuning step)
PREOUT (preout setting)
Normally, the FM tuning step employed by seek tun-
ing is 50 kHz. When AF or TA is on, the tuning step
automatically changes to 100 kHz. It may be prefer-
able to set the tuning step to 50 kHz when AF is on.
The RCA outputs can be used for rear speaker or sub-
woofer connection.
If you switch to SW, you can connect a rear speaker
lead directly to a subwoofer without using an auxiliary
amp.
!
The tuning step remains at 50 kHz during manual
tuning.
Initially, PREOUT is set for rear full-range speaker con-
nection (SW).
1
Press M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
1
Press M.C. to select the desired setting.
AUTO-PI (auto PI seek)
SW—REA
!
Even if you change this setting, there will be
no output if you select OFF in SUB.W (Refer to
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
The unit can automatically search for a different sta-
tion with the same programming, even during preset
recall.
1
Press M.C. to turn Auto PI seek on or off.
!
AUX (auxiliary input)
DEMO (demo display setting)
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
BT VERSION (Bluetooth version display)
1
!
Press M.C. to turn the demo display on or off.
If PW SAVE is on, DEMO cannot be selected.
You can display the system versions of this unit and
of Bluetooth module.
SCROLL (scroll mode setting)
1
Press M.C. to display the information.
When ever scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
S/W UPDATE (updating the software)
This function is used to update this unit with the lat-
est software. For information on the software and up-
dating, refer to our website.
1
Press M.C. to turn the ever scroll on or off.
BT AUDIO (Bluetooth audio activation)
!
Never turn the unit off while the software is being
updated.
You need to activate the BT AUDIO source in order to
use a Bluetooth audio player.
1
Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish updat-
ing the software.
1
Press M.C. to turn the BT AUDIO source on or off.
TITLE (multi-language)
This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
!
If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
Switching the dimmer setting
You can adjust the brightness of illumination.
!
1
Some characters may not be displayed properly.
Press M.C. to select the desired setting.
EUR (European)—RUS (Russian)
%
Press and hold
.
PW SAVE (power saving)
Using an AUX source
Switching this function on enables you to reduce the
consumption of battery power.
1
Insert the stereo mini plug into the
AUX input jack.
!
Turning on the source is the only operation al-
lowed when this function is on.
2
Press SRC/OFF to select AUX as the
1
Press M.C. to turn the power save on or off.
source.
BT CLEAR (resetting the Bluetooth wireless technol-
ogy module)
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to AUX
Bluetooth device data can be deleted. To protect per-
sonal information, we recommend deleting this data
before transferring the unit to other persons. The fol-
lowing settings will be deleted.
!
!
!
phone book entries on the Bluetooth telephone
preset numbers on the Bluetooth telephone
registration assignment of the Bluetooth tele-
phone
!
!
!
1
call history of the Bluetooth telephone
information of the connected Bluetooth telephone
PIN code of the Bluetooth device
Press M.C. to show the confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, turn
M.C. to display CANCEL and press to select.
Press M.C. to clear the memory.
2
CLEARED is displayed and the settings are de-
leted.
!
While this function is in use, do not turn off
the engine.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional information
Troubleshooting
Symptom
Cause
Action
The sound
from the
Bluetooth
audio source is nected cellular
not played
back.
There is a call in The sound will be
progress on a
Bluetooth con-
Symptom
Cause
Action
played back when
the call is termi-
nated.
The display illu- Demo mode is
mination turns on.
on and off at
Turn off the demo
display setting.
phone.
A Bluetooth-con- Do not operate the
random.
nected cellular
phone is cur-
rently being oper-
ated.
cellular phone at
this time.
The display
automatically form any opera- again.
returns to the tion within about
ordinary dis-
play.
You did not per- Perform operation
30 seconds.
A call was made Reconnect the
with a Bluetooth- Bluetooth connec-
connected cellu- tion between this
The repeat play Depending on
range changes the repeat play
unexpectedly. range, the se-
lected range may
Select the repeat
play range again.
lar phone and
unit and the cellu-
then immediately lar phone.
terminated. As a
result, communi-
cation between
this unit and the
cellular phone
change when an-
other folder or
track is being se-
lected or during
fast forwarding/
reversing.
was not termi-
nated properly.
A subfolder is Subfolders can- Select another re-
not played
back.
not be played
when FLD (folder
repeat) is se-
lected.
peat play range.
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
NO XXXX ap- There is no em-
pears when a
display is chan- mation.
ged (NO TITLE,
Switch the display
bedded text infor- or play another
track/file.
for example).
The unit is mal- You are using a
Move electrical de-
Built-in CD Player
functioning.
device, such as a vices that may be
Message
Cause
Action
There is inter- cellular phone,
causing the inter-
ference away from
the unit.
ference.
that transmits
electric waves
near the unit.
ERROR-07, 11, The disc is dirty. Clean the disc.
12, 17, 30
The disc is
scratched.
Replace the disc.
ERROR-07, 10, There is an elec- Turn the ignition
11, 12, 15, 17, trical or mechan- switch OFF and
30, A0
ical error.
back ON, or switch
to a different
source, then back
to the CD player.
ERROR-15
ERROR-23
The inserted disc Replace the disc.
is blank.
Unsupported CD Replace the disc.
format.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional information
Message
Cause
Sometimes there Wait until the mes-
is a delay be- sage disappears
tween the start of and you hear
Action
Message
Cause
Action
FRMT READ
PROTECT
All the files in the Transfer audio files
USB storage de- not embedded with
vice are em-
bedded with
Windows Media
DRM 9/10 to the
playback and
sound.
when you start to
hear any sound.
Windows Media USB storage de-
DRM 9/10. vice and connect.
NO AUDIO
The inserted disc Replace the disc.
N/A USB
The USB device ! Connect a USB
connected to is Mass Storage
not supported by Class compliant
does not contain
any playable
files.
this unit.
device.
! Disconnect your
device and replace
it with a compati-
ble USB storage
device.
SKIPPED
PROTECT
The inserted disc Replace the disc.
contains DRM
protected files.
All the files on
the inserted disc
are embedded
with DRM.
Replace the disc.
CHECK USB
The USB connec- Check that the
tor or USB cable USB connector or
has short-
circuited.
USB cable is not
caught in some-
thing or damaged.
USB storage device/iPod
The connected
USB storage de- USB storage de-
vice consumes
more than
500 mA (maxi-
Disconnect the
Message
Cause
Action
NO DEVICE
When plug and ! Turn the plug
play is off, no and play on.
USB storage de- ! Connect a com-
vice or iPod is
connected.
vice and do not
use it. Turn the
ignition switch to
patible USB sto-
rage device/iPod.
mum allowable OFF, then to ACC
current).
or ON and then
connect only com-
pliant USB storage
devices.
FRMT READ
NO AUDIO
Sometimes there Wait until the mes-
is a delay be- sage disappears
tween the start of and you hear
playback and
when you start to
hear any sound.
sound.
The iPod oper-
Make sure the con-
ates correctly but nection cable for
does not charge. the iPod has not
shorted out (e.g.,
There are no
songs.
Transfer the audio
files to the USB
storage device and
connect.
not caught in
metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
The connected
USB storage de- storage device in-
vice has security structions to dis-
Follow the USB
enabled.
able the security.
and reconnect.
SKIPPED
The connected
Play an audio file
USB storage de- not embedded with
vice contains
files embedded
with Windows
Mediaä DRM 9/
10.
Windows Media
DRM 9/10.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional information
Bluetooth device
Message
Cause
Action
Message
Cause
Action
ERROR-19
Communication Perform one of the
failed.
following opera-
tions.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
ERROR-10
The power failed Turn the ignition
for the Bluetooth switch OFF and
module of this
unit.
then to ACC or ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
–Change to a dif-
ferent source.
Then, return to the
USB source.
please contact
your dealer or an
authorized Pioneer
Service Station.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod’s main menu
is displayed, recon-
nect the iPod and
reset it.
Handling guidelines
Discs and player
ERROR-23
ERROR-16
USB storage de- USB storage de-
vice was not for- vice should be for-
Use only discs that feature either of the following two
logos.
matted with
matted with FAT12,
FAT12, FAT16 or FAT16 or FAT32.
FAT32.
The iPod firm-
ware version is
old.
Update the iPod
version.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod’s main menu
is displayed, recon-
nect the iPod and
reset it.
Use 12-cm discs. Do not use 8-cm discs or an adapter
for 8-cm discs.
Use only conventional, fully circular discs. Do not use
shaped discs.
STOP
There are no
Select a list that
songs in the cur- contains songs.
rent list.
NOT FOUND
No related
songs.
Transfer songs to
the iPod.
Do not insert anything other than a CD into the CD
loading slot.
Do not use cracked, chipped, warped, or otherwise
damaged discs as they may damage the player.
Unfinalized CD-R/RW discs cannot be played back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals to
the surface of the discs.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional information
To clean a CD, wipe the disc with a soft cloth outward
from the center.
About iPod settings
!
When an iPod is connected, this unit changes the
EQ (equalizer) setting of the iPod to off in order to
optimize the acoustics. When you disconnect the
iPod, the EQ returns to the original setting.
Condensation may temporarily impair the player’s
performance. Let it rest for about one hour to adjust
to a warmer temperature. Also, wipe any damp discs
off with a soft cloth.
!
You cannot set Repeat to off on the iPod when
using this unit. Repeat is automatically changed
to All when the iPod is connected to this unit.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded applica-
tion, playback environment, storage conditions, and
so on.
Incompatible text saved on the iPod will not be dis-
played by the unit.
Road shocks may interrupt disc playback.
DualDiscs
When using discs that can be printed on label sur-
faces, check the instructions and the warnings of the
discs. Depending on the discs, inserting and ejecting
may not be possible. Using such discs may result in
damage to this equipment.
DualDiscs are two-sided discs that have a recordable
CD for audio on one side and a recordable DVD for
video on the other.
Since the CD side of DualDiscs is not physically com-
patible with the general CD standard, it may not be
possible to play the CD side with this unit.
Frequent loading and ejecting of a DualDisc may re-
sult in scratches on the disc. Serious scratches can
lead to playback problems on this unit. In some
cases, a DualDisc may become stuck in the disc load-
ing slot and will not eject. To prevent this, we recom-
mend you refrain from using DualDisc with this unit.
Please refer to the information from the disc manu-
facturer for more detailed information about
DualDiscs.
Do not attach commercially available labels or other
materials to the discs.
!
!
The discs may warp making the disc unplayable.
The labels may come off during playback and pre-
vent ejection of the discs, which may result in da-
mage to the equipment.
USB storage device
Connections via USB hub are not supported.
Do not connect anything other than a USB storage
device.
Firmly secure the USB storage device when driving.
Do not let the USB storage device fall onto the floor,
where it may become jammed under the brake or ac-
celerator pedal.
Compressed audio
compatibility (disc, USB)
WMA
Depending on the USB storage device, the following
problems may occur.
File extension: .wma
!
!
!
!
Operations may vary.
The storage device may not be recognized.
Files may not be played back properly.
The device may generate noise in the radio.
Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to
384 kbps (VBR)
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Windows Media Audio Professional, Lossless, Voice/
DRM Stream/Stream with video: Not compatible
iPod
Do not leave the iPod in places with high tempera-
tures.
MP3
To ensure proper operation, connect the dock connec-
tor cable from the iPod directly to this unit.
File extension: .mp3
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Firmly secure the iPod when driving. Do not let the
iPod fall onto the floor, where it may become jammed
under the brake or accelerator pedal.
Sampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1 kHz,
48 kHz for emphasis)
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional information
USB storage device
Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4 (ID3
tag Version 2.x is given priority over Version 1.x.)
Playable folder hierarchy: up to eight tiers (A practical
hierarchy is less than two tiers).
M3u playlist: Not compatible
MP3i (MP3 interactive), mp3 PRO: Not compatible
Playable folders: up to 500
Playable files: up to 15 000
WAV
Playback of copyright-protected files: Not compatible
File extension: .wav
Partitioned USB storage device: Only the first partition
can be played.
Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM)
There may be a slight delay when starting playback of
audio files on a USB storage device with numerous
folder hierarchies.
Sampling frequency: 16 kHz to 48 kHz (LPCM),
22.05 kHz and 44.1 kHz (MS ADPCM)
Supplemental information
CAUTION
Only the first 32 characters can be displayed as a file
name (including the file extension) or a folder name.
!
!
Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, smart phones, or other devices while
using this product.
Russian text to be displayed on this unit should be en-
coded in one of the following character sets:
!
!
Unicode (UTF-8, UTF-16)
A character set other than Unicode that is used in
a Windows environment and is set to Russian in
the multi-language setting
Do not leave discs or a USB storage device in
any place that is subject to high
temperatures.
This unit may not operate correctly depending on the
application used to encode WMA files.
There may be a slight delay at the start of playback of
audio files embedded with image data or audio files
stored on a USB storage device that has numerous
folder hierarchies.
iPod compatibility
This unit supports only the following iPod models.
Supported iPod software versions are shown below.
Older versions may not be supported.
Made for
Disc
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
iPhone 4 (software version 4.1)
iPhone 3GS (software version 3.0.1)
iPhone 3G (software version 2.0)
iPhone (software version 1.1.1)
Playable folder hierarchy: up to eight tiers (A practical
hierarchy is less than two tiers).
Playable folders: up to 99
iPod nano 6th generation (software version 1.0)
iPod nano 5th generation (software version 1.0.1)
iPod nano 4th generation (software version 1.0)
iPod nano 3rd generation (software version 1.0)
iPod nano 2nd generation (software version 1.1.2)
iPod nano 1st generation (software version 1.2.0)
iPod touch 4th generation (software version 4.1)
iPod touch 3rd generation (software version 3.1.1)
iPod touch 2nd generation (software version 2.1.1)
iPod touch 1st generation (software version 1.1)
iPod classic (software version 1.0)
Playable files: up to 999
File system: ISO 9660 Level 1 and 2, Romeo, Joliet
Multi-session playback: Compatible
Packet write data transfer: Not compatible
Regardless of the length of blank sections between
the songs from the original recording, compressed
audio discs play with a short pause between songs.
Depending on the generation or version of the iPod,
some functions may not be available.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional information
2 Put those files into a folder.
3 Save the folder containing files on the USB
storage device.
However, depending on the system environ-
ment, you may not be able to specify the play-
back sequence.
For USB portable audio players, the sequence
is different and depends on the player.
Operations may vary depending on the software ver-
sion of iPod.
When using an iPod, an iPod Dock Connector to USB
Cable is required.
A Pioneer CD-IU51 interface cable is also available.
For details, consult your dealer.
About the file/format compatibility, refer to the iPod
manuals.
Audiobook, Podcast: Compatible
Bluetooth profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain pro-
files. This unit is compatible with the following
profiles.
CAUTION
Pioneer accepts no responsibility for data lost on
the iPod, even if that data is lost while this unit is
used.
!
!
!
!
!
!
!
GAP (Generic Access Profile)
SDP (Service Discovery Protocol)
OPP (Object Push Profile)
HFP (Hands Free Profile)
HSP (Head Set Profile)
PBAP (Phone Book Access Profile)
A2DP (Advanced Audio Distribution Pro-
file)
Sequence of audio files
The user cannot assign folder numbers and
specify playback sequences with this unit.
Example of a hierarchy
01
02
ꢀ
ꢁ
!
!
AVP (Audio/Video Profile)
AVRCP (Audio/Video Remote Control Pro-
file) 1.0
03
: Folder
: Compressed
audio file
ꢂ
04
ꢃ
ꢄ
ꢅ
Copyright and trademark
Bluetooth
01 to 05: Folder
number
1 to 6: Playback
sequence
05
The Bluetoothâ word mark and logos are regis-
tered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Pioneer
Corporation is under license. Other trade-
marks and trade names are those of their re-
spective owners.
Level 1 Level 2 Level 3 Level 4
Disc
Folder selection sequence or other operation
may differ depending on the encoding or writ-
ing software.
iTunes
USB storage device
Apple and iTunes are trademarks of Apple
Inc., registered in the U.S. and other coun-
tries.
Playback sequence is the same as recorded
sequence in the USB storage device.
To specify the playback sequence, the follow-
ing method is recommended.
1 Create a file name that includes numbers that
specify the playback sequence (e.g., 001xxx.
mp3 and 099yyy.mp3).
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional information
MP3
Specifications
General
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Maximum current consumption
..................................................... 10.0 A
Dimensions (W × H × D):
DIN
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e. revenue-
generating) real time broadcasting (terrestrial,
satellite, cable and/or any other media), broad-
casting/streaming via internet, intranets and/
or other networks or in other electronic con-
tent distribution systems, such as pay-audio or
audio-on-demand applications. An indepen-
dent license for such use is required. For de-
tails, please visit
Chassis ..................... 178 mm × 50 mm ×
165 mm
Nose ........................... 188 mm × 58 mm × 16 mm
D
Chassis ..................... 178 mm × 50 mm ×
165 mm
Nose ........................... 170 mm × 46 mm × 16 mm
Weight .......................................... 1.2 kg
WMA
Windows Media is either a registered trade-
mark or trademark of Microsoft Corporation in
the United States and/or other countries.
This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
Audio
Maximum power output ....... 50 W × 4
70 W × 1/2 W (for subwoo-
fer)
Continuous power output ... 22 W × 4 (50 Hz to
15 000 Hz, 5 % THD,
4 W load, both channels dri-
ven)
Load impedance ...................... 4 W (4 W to 8 W allowable)
Preout maximum output level
..................................................... 2.0 V
Tone controls:
iPod & iPhone
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc., regis-
tered in the U.S. and other countries.
Bass
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been de-
signed to connect specifically to iPod or
iPhone, respectively, and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the op-
eration of this device or its compliance with
safety and regulatory standards. Please note
that the use of this accessory with iPod or
iPhone may affect wireless performance.
Frequency ................ 100 Hz
Gain ............................ 12 dB
Mid
Frequency ................ 1 kHz
Gain ............................ 12 dB
Treble
Frequency ................ 10 kHz
Gain ............................ 12 dB
Subwoofer (mono):
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope .................................... –18 dB/oct
Gain ...................................... +6 dB to –24 dB
Phase .................................. Normal/Reverse
CD player
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net-
work)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional information
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12
(2 ch audio)
(Windows Media Player)
WAV signal format .................. Linear PCM & MS ADPCM
(Non-compressed)
USB
USB standard specification
..................................................... USB 2.0 full speed
Maximum current supply .... 1 A
USB Class ................................... MSC (Mass Storage Class)
File system .................................. FAT12, FAT16, FAT32
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12
(2 ch audio)
(Windows Media Player)
WAV signal format .................. Linear PCM & MS ADPCM
(Non-compressed)
FM tuner
Frequency range ...................... 87.5 MHz to 108.0 MHz
Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 72 dB (IEC-A network)
MW tuner
Frequency range ...................... 531 kHz to 1 602 kHz
Usable sensitivity ..................... 25 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IEC-A network)
LW tuner
Frequency range ...................... 153 kHz to 281 kHz
Usable sensitivity ..................... 28 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IEC-A network)
Bluetooth
Version .......................................... Bluetooth 3.0 certified
Output power ............................ +4 dBm Maximum
(Power class 2)
Note
Specifications and the design are subject to mod-
ifications without notice.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202 Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
台北市內湖區瑞光路407號8樓
電話： (02) 2657-3588
先鋒電子（香港）有限公司
香港九龍長沙灣道909號5樓
電話： (0852) 2848-6488
ã 2011 PIONEER CORPORATION. All
rights reserved.
<KKMZX> <11I00000>
<QRB3179-C> EW
Download from Www.Somanuals.com. All Manuals Search And Download.
|