Operating Instructions
Blu-ray Disc PLAYER
Download from Www.Somanuals.com. All Manuals Search And Download.
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
This product complies with the Low Voltage Directive
2006/95/EC and EMC Directiveꢀ2004/108/EC.
D3-4-2-1-9a_A_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-1a_A_En
requires repair will be charged for even during the
warranty period.
K041_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement. S002_En
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.
K058_A_En
For U.K model:
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified
service personnel.
IMPORTANT: THE MOULDED PLUG
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is fitted in this plug. Should the
fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug
must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer.
If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of
safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Blue : Neutral Brown : Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows ;
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
3
En
D3-4-2-1-2-2_B_En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
01 Before you start
06 Using the Home Media Gallery
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . 6
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disc/content format playback compatibility . . . . . . . . . . . . . . . . . 7
File compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Titles and chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DVD-Video regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
BD-ROM regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
About network playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using the Home Media Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Music Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
About Windows Media Player 11/Windows Media Connect . . . . 36
07 Video/Audio Adjust menu
Video Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Audio Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
02 Connecting up
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Easy connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using other types of video output. . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting for HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting using the component video output . . . . . . . . . . . . . 11
Changing the output video resolution . . . . . . . . . . . . . . . . . . . . 12
Connecting using an S-Video output . . . . . . . . . . . . . . . . . . . . . 12
Connecting for surround sound . . . . . . . . . . . . . . . . . . . . . . . . . 13
Network connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Controlling this player via another Pioneer component . . . . . . . 14
Using an external IR receiver with this player. . . . . . . . . . . . . . . 15
08 Initial Setup menu
Using the Initial Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
About the audio output settings . . . . . . . . . . . . . . . . . . . . . . . . . 42
Speaker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Software updating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
09 Additional information
Taking care of your player and discs . . . . . . . . . . . . . . . . . . . . . . 44
Screen sizes and disc formats. . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Resetting the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Setting up the remote to control your TV . . . . . . . . . . . . . . . . . . . 46
TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
BD/DVD language code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
BD/DVD country/area code list . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
03 Controls and displays
Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Front panel display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
04 Getting Started
Switching on and setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the on-screen displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setting up for network use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Playing movies, music and photos. . . . . . . . . . . . . . . . . . . . . . . 20
Playing BD/DVD movies and Audio CD . . . . . . . . . . . . . . . . . . . 20
Playback controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
05 Using the Disc Navigator
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Music Navigator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
01
Before you start
Features
HDMI digital interface
The HDMI (High-Definition Multimedia Interface) interconnect
provides high quality digital audio and video, all from a single
user-friendly connector. HDMI is the first consumer electronics
interface to support uncompressed standard, enhanced, or
high-definition video plus standard to multi-channel surround
sound audio, all using one interface. You can easily connect to an
HDMI-equipped AV receiver or audio-visual device for high quality
audio and video.
BD-ROM playback
Blu-ray Disc is a next-generation video disc format featuring far
higher disc capacity than conventional DVD. The higher capacity
makes a whole range of new and enhanced features possible, such
as support for high-definition video up to 1920 x 1080 pixels, high
quality, surround sound audio, greater interactivity and richer
content.
• HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
BD-ROM discs are commercially produced discs (Video Distribution
format) that can contain movie and other video content, interactive
content, enhanced menu features such as pop-up menus (press
POPUP MENU/MENU during playback for these), full-colour,
high-definition animated buttons and animated menu transition
effects, button sounds (sounds are played when menu buttons are
selected or activated), high-definition bitmap subtitles supporting
full-colour images with frame-accurate animation effects up to full
video frame rate, and so on.
HDMI Control
By connecting this unit to a Pioneer plasma television, AV system
(amplifier or AV receiver etc.), or HD AV Converter with an HDMI
cable, you can control this unit from the connected plasma
television, as well as have the connected plasma television, AV
system or HD AV Converter automatically change inputs in
response to this unit starting playback or having the GUI screen (ex.
Disc Navigator) displayed (known as the Auto-select function). The
connected plasma television can thereby have its power turned from
off to on by this function.
While BD capacity is enough for most applications, the BD-ROM
standard allows for content to be spread across several discs,
removing the limit of one physical disc. Follow the on-screen
instructions during playback when using these special kinds of
discs.
You can also have this unit turn on automatically when you control
this unit from a connected plasma television that is turned on
(Simultaneous power function).
BD-J application
Additionally, when the language information from a connected
plasma television is received, you can have this unit’s on-screen
display language change automatically to that of the plasma
television (only when playback is stopped and GUI screen is not
displayed).
Refer to your plasma television’s operating manual for more
information regarding how your plasma television transmits
language information.
For more information about which operations can be carried out by
connecting via HDMI cable, refer to the operating manual for your
plasma television, AV system or HD AV Converter.
The BD-ROM specification supports Java for interactive content.
The Java specification for BD-ROM is known as BD-J. This allows
content providers to put games and other interactive material linked
to specific titles on to BD-ROM discs. (This player does not support
downloadable BD-J content, direct connection to the Internet or the
retrieval of content through the Internet.)
PureCinema
When you playback film material (24 frames/second) on a BD-ROM
or DVD-Video disc, the progressive scan line automatically converts
the film material to optimum quality (see PureCinema on page 37).
1080/50p, 1080/60p and 1080/24p output video
This player supports a variety of output video resolutions, up to
1080 lines/50 or 60 frames per second, progressive (HDMI only),
making it ideal for playing high-definition Blu-ray Discs.
• Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the U.S. and
other countries.
• © 2000-2007 Esmertec AG
Esmertec and Jbed are trademarks and/or registered trademarks of
Esmertec AG.
Connect to a local area network
Connect this player to one or more computers in your house via
Ethernet and use them as media servers, streaming audio, video
and still image files for playback on your TV and/or audio system.
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• HDMI cable
• LAN cable
High quality audio
01
• Power cable
• Warranty card
Putting the batteries in the remote control
•
Insert two AA/R6P batteries into the battery compartment
following the indications (,) inside the compartment.
This player is compatible with Dolby TrueHD, Dolby Digital Plus,
DTS-HD High Resolution Audio, Dolby Digital and DTS.
To enjoy Dolby TrueHD, Dolby Digital Plus or DTS-HD High
Resolution Audio at the maximum performance, connect this player
to a Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution
Audio-compatible AV amplifier using an HDMI cable. Then, after
placing a Blu-ray Disc recording a material with Dolby TrueHD,
Dolby Digital Plus or DTS-HD High Resolution Audio, open the disc
menu and select “Dolby TrueHD”, “Dolby Digital Plus” or “DTS-HD
High Resolution Audio” from the menu.
Important
Incorrect use of batteries can result in hazards such as leakage and
bursting. Please observe the following:
• Don’t mix new and old batteries together.
• Don’t use different kinds of batteries together — although they
may look similar, different batteries may have different voltages.
For the output conditions of various audio types, see About the audio
output settings on page 42.
• Make sure that the plus and minus ends of each battery match
the indications in the battery compartment.
• Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
• Remove batteries from equipment that isn’t going to be used for
a month or more.
• “DTS” and “DTS Digital Surround” are registered trademarks of
DTS, Inc.
• When disposing of used batteries, please comply with
governmental regulations or environmental public instruction’s
rules that apply in your country/area.
Movie file playback
Video files encoded in the Windows Media™ Video (WMV), MPEG-1/
2 formats are playable from DVD-R/-RW, or from a connected media
server.
• WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a heater. This
can cause batteries to leak, overheat, explode or catch fire. It
can also reduce the life or performance of batteries.
D3-4-2-3-3_En
Music file playback
This player supports various audio formats, including Windows
Media Audio (WMA), MP3 and WAV. You can play files stored on
DVD-R/-RW, or from a connected media server.
Using the remote control
Photo file playback
PNG, GIF and JPEG image files — including the popular EXIF format
used by most digital cameras to store picture shooting information
together with the JPEG image — are playable from DVD-R/-RW, or
from a connected media server.
Please keep in mind the following when using the remote control:
• Make sure that there are no obstacles between the remote and
the remote sensor on the unit.
• Windows Media™ is a trademark of Microsoft Corporation.
• The remote has a range of about 7 m (at an angle of 30º from
either side of the sensor). Use within this range in front of the
remote control sensor on the front panel.
• This product includes technology owned by Microsoft Corporation
and cannot be used or distributed without a license from
Microsoft Licensing, Inc.
• Remote operation may become unreliable if strong sunlight or
fluorescent light is shining on the unit’s remote sensor.
What’s in the box
• Remote controllers for different devices can interfere with each
other. Avoid using remotes for other equipment located close to
this unit.
Please confirm that the following accessories are in the box along
with these operating instructions when you open it:
• Replace the batteries when you notice a fall off in the operating
range of the remote.
• Remote control
• When the batteries run down or you change the batteries, the TV
preset codes are automatically reset. See Resetting the player on
page 45 to reset them.
• AA/R6P dry cell batteries x2
• Stereo audio cable (red/white plugs)
• Video cable (yellow plugs)
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
– This player can also play DVD discs containing PC data.
See below for the file compatibility.
Disc/content format playback compatibility
01
• This player cannot play DVD-Audio and DVD-RAM discs.
General disc compatibility
CD compatibility
This player is compatible with a range of disc types (media) and
formats. Compatible discs will usually feature one of the following
logos on the disc and/or disc packaging. Note however that some
disc types, such as recordable BD, DVD or CD, may be in an
unplayable format — see below for further compatibility
information.
• This player can play CD-DA discs.
• PC files stored on CDs cannot be played back.
• Regarding copy protected CDs: This product is designed to
conform to the specifications of the Audio CD format. This
player does not support the playback or function of discs that do
not conform to these specifications.
Blu-ray Disc (BD)
• The audio signals of a CD output at the DIGITAL AUDIO OUT
(COAXIAL/OPTICAL) jacks of this player are protected from
copying and cannot be copied on other external components.
DualDisc playback
DVD-Video
DVD-R
DVD-R DL
DVD-RW
A DualDisc is a new two -sided disc, one side of which contains DVD
content – video, audio, etc. – while the other side contains non-DVD
content such as digital audio material.
The DVD side of a DualDisc will play in this product (excluding any
DVD-Audio content).
The non-DVD, audio side of the disc is not compatible with this
player.
It is possible that when loading or ejecting a DualDisc, the opposite
side to that being played will be scratched. Scratched discs may not
be playable.
For more detailed information on the DualDisc specification, please
refer to the disc manufacturer or disc retailer.
• “Blu-ray Disc” and
are trademarks.
•
is a trademark of DVD Format/Logo Licensing
Corporation.
PC-created disc compatibility
Discs recorded using a personal computer may not be playable in
this unit due to the settings of the application software used to
create the disc. Check with the software publisher for more detailed
information.
• This player may not be able to play perfectly every disc that
features one of the logos listed above. Please contact Pioneer if
you find a disc that won’t play properly.
BD compatibility
Important
• This player can play BD-ROM discs.
• This player cannot play discs other than the ones listed in this
chapter.
– BD-ROM discs should conform to BD-ROM Profile 1.
• This player can play BD-R discs.
• Do not use 8 cm disc adapters with this player. 8 cm discs can
be played directly by placing then in the 8 cm disc depression in
the center of the disc tray.
– This player is compatible with Blu-ray Disc Recordable format
1
Ver. 2 .
– This player is not compatible with Blu-ray Disc Recordable
format Ver. 1 .
2
File compatibility
• This player can play BD-RE discs.
• Compatible media: DVD-R, DVD-RW, media server on network
(some formats may not be supported depending on the media
server type).
– This player is compatible with Blu-ray Disc Rewritable format
Ver. 31.
– This player is not compatible with Blu-ray Disc Rewritable
• Even when they are in a supported format, some files may not
play or display depending on the content.
3
format Ver. 1 and Ver. 22.
• This player can play 12 cm discs, but cannot play 8 cm discs.
• Even when playing a supported format, some functions may not
operate properly depending on the content.
DVD compatibility
• This player can play DVD-ROM (DVD-Video)/-R/-RW discs.
• DRM-protected contents on DVD-R/-RW discs or on media
servers that do not support WMDRM, and otherwise
incompatible files are skipped.
– This player can play DVD-R/-RW discs recorded as DVD-Video
format.
– This player cannot play unfinalized DVD discs and VR mode
DVD discs.
Note
1 The standard for recording of BDMV format data.
2 The standard for recording of BDAV format data.
3 The standard that uses the provided cartridge.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• Please note, the following file naming structure needs to be
adhered to when creating/renaming any digital media to be
played on the unit (either through computer-created disc media,
or the Home Media Gallery connection). This disclaimer does
not apply to any media purchased at retail locations: Due to the
coding system used, this player will only read/play files named
using standard alphanumeric characters. Any other characters
or symbols (e.g. characters with accents) used in naming the
file will render it unreadable/unplayable by the unit. If you
encounter any difficulties with playback of media, please
rename the file in accordance to this standard.
Even when files have a supported file extension, some files may not
play or display depending on the content or media server type.
01
Titles and chapters
BD and DVD movie discs are divided into one or more titles. Titles
may be further subdivided into chapters.
Title 1
Title 2
Title 3
Supported video formats
Chapter 1 Chapter 2 Chapter 3Chapter 1 Chapter 1 Chapter 2
1
•
•
•
•
Windows Media Video 9 (WMV9)
– MP@HL
DVD-Video regions
Windows Media Video 9 (WMV9) Advanced Profile (VC-1)
All commercially produced DVD movies (DVD-Video discs) carry a
region mark on the case somewhere that indicates which region(s)
of the world the disc is compatible with. This player also has a region
mark, which you can find on the rear panel. Discs from incompatible
regions will not play in this player. Discs marked ALL will play in any
player.
– AP@L3
MPEG-2 (PS/TS)
– MP@HL
MPEG-1
The diagram below shows the various DVD regions of the world.
Supported audio formats
•
Windows Media Audio 9 (WMA9)
– Bit rate: up to 192 kbps (constant bit-rate (CBR));
1
up to 384 kbps (variable bit-rate (VBR))
– Sampling rates: 44.1 kHz or 48 kHz
5
2
1
6
2
•
Windows Media Audio 9 Professional (WMA9 Pro)
– Bit rate: up to 768 kbps
3
4
5
– Sampling rates: 44.1 kHz or 48 kHz
– Channels: up to 5.1ch
2
4
This player is region 2.
•
•
MPEG-1 Audio Layer 3 (MP3)
– Sampling rates: 32 kHz, 44.1 kHz or 48 kHz
– Bit rate: up to 320 kbps
BD-ROM regions
Linear PCM (WAV)
Like DVD movies, BD movie discs (BD-ROM) also carry a region
mark that indicates which region(s) of the world the disc is compat-
ible with. This player also has a region mark, which you can find on
the rear panel. Discs from incompatible regions will not play in this
player. Discs marked ALL will play in any player.
– Sampling rates: 44.1 kHz or 48 kHz
Supported image formats
•
JPEG
– File format: JFIF or Exif
The diagram below shows the various BD-ROM regions of the world.
– Resolution: up to 4096 x 4096 pixels
Baseline JPEG and progressive JPEG are supported
•
•
PNG
– Resolution: up to 4096 x 4096 pixels
GIF
– Resolution: up to 4096 x 4096 pixels
Region A
Region B
Region C
File extensions
The following file extensions should be used with this player:
This player is region B.
•
•
•
Video
‘.wmv’ ‘.mpg’ ‘.mpeg’
Audio
‘.wma’ ‘.mp3’ ‘.wav’
Image
‘.jpg’ ‘.jpeg’ ‘.png’ ‘.gif’
8
En
Note
1 This player is not compatible with WMV9 Complex Profile.
Download from Www.Somanuals.com. All Manuals Search And Download.
CChoaptnern2 ecting up
02
Rear panel
1
2
3
4
5
6
7
8
9
CONTROL
IN
IN
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
AC IN
Y
CENTER SURROUND FRONT
L
VIDEO OUT
L
DIGITAL AUDIO OUT
PB
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
PR
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
10 11
1
AC IN
8
AUDIO OUT (5.1ch)
Connect the supplied power cord here, then plug into a power
outlet.
Multi-channel (5.1ch) analog audio outputs for connection to an AV
receiver with multi-channel analog audio inputs (page 13).
2
CONTROL IN
9
AUDIO OUT (2ch)
Use to control this player from the remote sensor of another Pioneer
component with a CONTROL OUT terminal and bearing the
mark. Connect the CONTROL OUT of the other component to the
CONTROL IN of this player using a mini-plug cord (page 14).
Stereo analog audio outputs for connection to your TV, AV receiver
or stereo system (page 10).
10 IR IN
Jack for an external IR (infrared) remote control receiver (page 15).
3
HDMI OUT
11 IR RECEIVER switch
Switch to the setting compatible with your external IR remote
control receiver (page 15).
HDMI output providing a high quality interface for digital audio and
video (page 11).
4
LAN (100)
Ethernet port for 100BASE-TX (100 Mbps) network connection
(page 14).
Tip
• When connecting this player to your TV, AV receiver or other
equipment, make sure that all components are ‘switched off’
and ‘unplugged’.
5
VIDEO OUT and S-VIDEO OUT
Video output (composite) that you can connect to your TV or AV
receiver using the supplied video cable (page 10).
• You may find it useful to have the manuals supplied with your
other components handy when connecting this player.
S-Video output that you can use instead of the VIDEO OUT jacks
(page 12).
6
COMPONENT VIDEO OUT
High quality video output for connection to a TV, monitor or AV
receiver that has component video inputs.
Connect using a commercially available three-way component video
cable (page 11).
7
DIGITAL AUDIO OUT (COAXIAL/OPTICAL)
Digital audio outputs for connection to a PCM, Dolby Digital, and/or
DTS-compatible AV receiver (page 13).
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy connections
02
To audio input
To video input
TV
CONTROL
IN
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
AC IN
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
DIGITAL AUDIO OUT
PB
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
PR
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
To power outlet
This is a basic setup that allows you to watch discs on your TV using
just the cables supplied.
Using other types of video output
This player has standard (composite), S-Video and component video
outputs, as well as an HDMI connector (for digital video/audio).
Important
In order to be able to watch HD (high definition) BDs at their full
resolution, you should connect the player to your TV using either the
component video output, or (even better) the HDMI output.
• This player is equipped with copy protection technology. Do not
connect this player to your TV via a VCR using AV cables, as the
picture from this player will not appear properly on your TV. (This
player may also not be compatible with some combination TV/
VCRs for the same reason; refer to the manufacturer for more
information.)
An HDMI connection will additionally give you HD output when
watching DVDs.
If your display has neither of these connection types, an S-Video jack
is also provided, which should give slightly better video quality than
using the standard video output.
• Do not unplug the player from the power outlet while it is
switched on.
• Do not plug this player into a switched power supply found on
some amplifiers and AV receivers.
1
Connect the VIDEO OUT and one pair of AUDIO OUT (2ch)
jacks to a set of audio/video inputs on your TV.
Use the supplied red/white stereo audio and yellow video cables.
Make sure you match up the left and right audio outputs with their
corresponding inputs for correct stereo sound.
See Using other types of video output below if you want to use a
different type of connection.
2
Connect the supplied AC power cord to the AC IN inlet,
then plug into a power outlet.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
After switching on the player you may need to set the output video
resolution and HDMI colour space for compatibility with your
display. See Changing the output video resolution on page 12 and
HDMI Color Space in Using the Initial Setup menu on page 39.
Connecting for HDMI output
02
If you have an HDMI or DVI (with HDCP) equipped monitor or
display, you can connect it to this player using the supplied HDMI
cable.
About HDMI
The HDMI connector outputs uncompressed digital video, as well as
most digital audio formats.
HDMI supports both standard and high-definition video, plus
standard and multi-channel surround-sound audio. HDMI features
include uncompressed digital video, one connector (instead of
several cables and connectors), and communication between the
AV source and AV devices such as DTVs.
Important
• This unit has been designed to be compliant with HDMI
(High-Definition Multimedia Interface). Depending on the
component you have connected, using a DVI connection may
result in unreliable signal transfers.
HDMI was developed to provide the technologies of High-bandwidth
Digital Content Protection (HDCP) as well as Digital Visual Interface
(DVI) in one specification. HDCP is used to protect digital content
transmitted and received by DVI-compliant displays.
• If you change the display connected to the HDMI output, you will
also need to change the output video resolution settings to
match the new display (see Changing the output video resolution
on page 12 to do this).
About HDMI Control
You can enable HDMI Control by turning the HDMI Control setting
to On for all components connected via HDMI cable. Check the
video output from this unit once you have completed making
connections and settings for all components. You will need to check
the video output each time you change connected components or
remove the HDMI cable.
• The HDMI connection is compatible with 8-channel linear PCM
1
signals (44.1 kHz to 192 kHz , 16 bit/20 bit/24 bit), Dolby Digital,
Dolby TrueHD, Dolby Digital Plus, DTS-HD High Resolution
Audio and DTS (5.1 channel signals) bitstreams.
If you want to use an HDMI cable other than the supplied HDMI
cable, use the one that supports the HDMI 1.3 specification
(Category 2) or later. The HDMI Control functions may not operate
properly if you do not use an HDMI cable that supports the HDMI 1.3
specification (Category 2) or later.
• Depending on the HDMI cable being used, 1080p output may
not appear correctly (The supplied HDMI cable is capable of
outputting 1080p video).
• If you connect a DVI device to the HDMI output of this player,
ensure that it is compliant with High-bandwidth Digital Content
Protection (HDCP). If you choose to connect to a DVI connector,
you will need a separate adaptor (DVIHDMI) to do so. A DVI
connection, however, does not support audio signals. Consult
your local audio dealer for more information.
Connecting using the component video
output
You can use the component video output instead of the standard
video out jack to connect this player to your TV (or other equipment).
•
Use an HDMI cable (supplied) to connect the HDMI OUT
interconnect on this player to an HDMI interconnect on an
HDMI-compatible display.
•
Use a component video cable (not supplied) to connect the
COMPONENT VIDEO OUT jacks to a component video input on
your TV, monitor or AV receiver.
Be careful to match up the colours of the three jacks for correct
connection.
To HDMI
interconnect
To component
video input
HDMI-compatible display
CONTROL
IN
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
TV
DIGITAL AUDIO OUT
P
B
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
P
R
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
CONTROL
IN
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
• The arrow on the cable connector body should be face up for
correct alignment with the connector on the player.
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
DIGITAL AUDIO OUT
PB
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
PR
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
11
En
Note
1 There are some restrictions depending on the sampling rate. For more information see About the audio output settings on page 42.
Download from Www.Somanuals.com. All Manuals Search And Download.
24p output
Changing the output video resolution
02
For smooth presentation of 1080/24p or 720/24p video with an
HDMI-equipped display compatible with 1080/24p input, set
24p Direct Out (page 39) on this player to On.
Use the OUTPUT RESOLUTION button located on both the front
panel and the remote control to switch the output video resolution
for the HDMI and component video outputs.
This player will output 1080/24p video over HDMI in the following
cases:
The table below shows the output settings.
• 1080/24p video: When the output video resolution is set to Auto
or Source Direct.
TV
system
Component
output
Video/S-Video
output
Setting
AUTO
HDMI output
• 720/24p video: When the output video resolution is set to Auto.
PAL
NTSC
TV’s preferred TV’s preferred 576/50i
resolution1,2
resolution3
480/60i
Note
576i or PAL
576/50i
480/60i
576/50i
480/60i
576/50i
480/60i
• Even when 24p Direct Out is set to On, if a TV not compatible
with 1080/24p video is connected, the actual frame frequency of
the video output will be 60 Hz.
480i
NTSC
576p or PAL
576/50p
480/60p
576/50p
480/60p
576/50i
480/60i
• The video output will be interrupted when switching the video
output from 1080/24p or 720/24p to other output video
resolutions, or when switching to 1080/24p or 720/24p from
other output video resolutions.
480p
NTSC
720p
PAL
720/50p
720/60p
576/50i
576/50i
480/60i
NTSC
720/60p 4,5
1080i
PAL
NTSC
1080/50i
1080/60i
576/50i
1080/60i4,5
576/50i
480/60i
Connecting using an S-Video output
1080p
PAL
NTSC
1080/50p
1080/60p
576/50i
480/60i
576/50i
480/60i
You can use the S-Video output instead of the VIDEO OUT jack to
connect this player to your TV (or other equipment).
Source PAL
Direct NTSC
Dependent on Dependent on 576/50i
source1,2 source 2,5,6,
480/60i
•
Use an S-Video cable (not supplied) to connect the S-VIDEO
OUT to an S-Video input on your TV, monitor or AV receiver.
Line up the small triangle above the jack with the same mark on the
plug before plugging in.
1. Refer to 24p output below for conditions.
2. The video output will be interrupted when switching the video output.
3. For resolutions that cannot be output by component output, video is output in the
following resolutions:
PAL: 576/50i
NTSC: 480/60i
4. Video output is 480i during copy protected DVD-Video playback.
5. Video output during BD-ROM playback is 576i/480i depending on the disc.
6. The frame frequency for 1080/24p is still 60 Hz.
To S-video input
Note
TV
• Depending on your display, some of the settings may result in
the picture disappearing. In this case, press
OUTPUT RESOLUTION repeatedly until the picture re-appears.
CONTROL
IN
• 720/50p, 1080/50i, 1080/50p, 1080/60p and 1080/24p output is
only compatible with HDMI displays. They are not compatible
with the component video output.
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
DIGITAL AUDIO OUT
P
B
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
P
R
S
IR RECEIVER
R
SUB WOOFER
• When output video resolution is set to 720p, 1080i or 1080p,
video is output in 16:9 format even if TV Aspect Ratio (page 39)
is set to 4:3 (Standard).
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
• If the contours of the displayed subjects look jagged or blurred,
try setting the output video resolution to 576i/480i. (If you
connected this player to your TV with the HDMI connection and
the picture disappears when you switch the output video
resolution to 576i/480i, use the component connection with the
576i/480i output video resolution or S-Video, the standard
composite connection instead.)
• Note that when using a Component Video connection with a TV
or other AV component (not using HDMI), 480/60i video may be
output in 480/60p, and 576/50i video may be output in 576/50p.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Analog connections
Connect the AUDIO OUT (5.1ch) jacks on this player to the
multi-channel analog inputs on your AV receiver.
Use a dedicated six-way cable (not supplied), or three sets of stereo
cables (not supplied) to connect the six channels.
Connecting for surround sound
02
•
This player offers both analog and digital connections for surround
sound. The digital outputs (coaxial and optical) provide a convenient
way to connect this player to an AV receiver with built-in Dolby
Digital and/or DTS decoders. The 5.1ch analog outputs can be used
to connect to an AV receiver with multi-channel analog audio inputs.
Check carefully that each channel is connected to its corresponding
channel on the AV receiver.
Check the operating instructions that came with your AV receiver for
more on these connections.
After connecting, you can make settings for the number of speakers
connected to your system — see the Speakers section of the Initial
Setup menu on page 41 and Speaker Setup on page 43.
Digital connections
To multi-channel
input
•
Connect one of the DIGITAL AUDIO OUT (COAXIAL/
OPTICAL) jacks on this player to a digital input on your AV
receiver.
AV receiver
To coaxial/optical
digital input
AV receiver
CONTROL
IN
CONTROL
IN
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
DIGITAL AUDIO OUT
PB
SETTING
SETTING
2
1
Y
HDMI OUT
LAN(100)
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
R
DIGITAL AUDIO OUT
PR
S
IR RECEIVER
PB
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
R
PR
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
Optical connection: Use an optical cable (not supplied) to connect
the DIGITAL AUDIO OUT OPTICAL jack to an optical input on your
AV receiver.
• When inserting the plug, the protective shutter will open and
you should hear the plug click into position when fully inserted.
Take care not to force the plug as this may damage the shutter,
the cable and/or the player.
Coaxial connection: Use a coaxial cable (not supplied) to connect
the DIGITAL AUDIO OUT COAXIAL jack to a coaxial input on your
AV receiver.
Note
• Linear PCM audio output over the DIGITAL AUDIO OUT
(COAXIAL/OPTICAL) jacks is limited to 2ch, 48 kHz.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting directly to a PC
If you only need to use one PC to act as a media server, you can
connect this player directly to the PC using the included LAN cable.
Network connection
02
This player can be connected to a local area network (LAN) via the
Ethernet port on the rear panel.
CONTROL
IN
After making the physical connection the player needs to be set up
for network communication. This is done from the Initial Setup
menu — see Setting up for network use on page 19 for detailed
instructions.
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
DIGITAL AUDIO OUT
PB
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
PR
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
For best performance, we recommend using a 100BASE-TX
compatible PC and Ethernet hub.
Connecting via an Ethernet hub
If you already operate one or more PCs on a local area network, you
can integrate this player by connecting it to the Ethernet hub using
the included LAN cable.
LAN(10/100)
In the example configuration below, this player would be able to
access content from either of the PCs.
CONTROL
IN
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
DIGITAL AUDIO OUT
P
B
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
PC
R
P
R
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
Controlling this player via another Pioneer
component
The CONTROL IN jack allows you to control this player via the
remote control sensor of another Pioneer component — typically an
AV receiver — that has a CONTROL OUT jack. Remote control
signals are passed through to the player from the remote sensor of
the other component, allowing you greater freedom in the
placement of your player.
Ethernet hub
(router with hub functionality)
1
2
3
4
•
Use a miniplug cord (not supplied) to connect the CONTROL
IN jack of this player with the CONTROL OUT jack of your other
Pioneer component.
LAN(10/100)
LAN(10/100)
To CONTROL OUT
AV Receiver
PC 1
PC 2
CONTROL
IN
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
DIGITAL AUDIO OUT
PB
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
PR
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
• You will also need to connect a coaxial digital cable, analog
audio cable, or video cable.
• When connected via System Control, point the remote control
toward the connected component (such as an AV receiver). The
remote will not work correctly when pointed at this unit.
• You cannot connect use System Control with components that
do not have a System Control jack or with components
manufactured by companies other than Pioneer.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an external IR receiver with this player
02
If you prefer to keep your AV equipment in a closed cabinet, you can
use an external IR receiver connected to the IR IN jack. You can thus
have just the receiver outside of the cabinet and still be able to
control the player.
IR receiver
CONTROL
IN
IR
AUDIO OUT
(5.1ch)
AUDIO OUT
(2ch)
Y
IN
CENTER SURROUND FRONT
L
VIDEO OUT
L
DIGITAL AUDIO OUT
PB
SETTING
SETTING
2
1
HDMI OUT
LAN(100)
R
PR
S
IR RECEIVER
R
SUB WOOFER
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
Tip
• You may need to set the IR RECEIVER switch (located under the
IR IN jack) for this player to recognize the IR receiver correctly.
• This player does not supply power to the external IR receiver.
Please see the operating instructions of the IR receiver for the
power requirements.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
03
Controls and displays
Front panel
1
2
3
4
5
10
9
8
7
6
1
STANDBY/ON
6
(play)
Press to switch the player on (the power indicator and indicator in
the middle of the unit light up when the power is on) or into standby.
Press to start or resume playback.
7
(stop)
2
Disc tray
Press to stop playback (you can resume playback by pressing ).
3
OPEN/CLOSE
8 (pause) (pause)
Press to open or close the disc tray.
Press to pause playback. Press again to restart.
4
Indicators
9
Skip/scan buttons
• FL OFF – Lights when the display and other indicators are
switched off.
• – Press to jump to the next chapter, track, etc. Press
and hold for fast forward scanning.
• HD – Lights when the video output is 720p, 1080i or 1080p
(HDMI), or 720p or 1080i (component).
• – Press to jump back to the beginning of the current
chapter, track, etc. then to previous chapters, tracks, etc. Press
and hold for fast reverse scanning.
• LAN – Lights when there is an active local area network (LAN)
connection.
10 OUTPUT RESOLUTION
• HDMI – Lights when a device is connected via HDMI.
Press to switch the output resolution over HDMI and component
video outputs. See Changing the output video resolution on page 12.
5
Display
Shows disc status and playback information.
Front panel display
L
1
2
3
1
Lights during playback of a disc.
2
Character display
Shows various playback information — disc time, chapter and title
number, etc.
3
NTSC
Lights when the video output signal format is NTSC.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
9
DISPLAY
Remote control
03
Press to display information (see page 23).
10 ANGLE
Press to change the camera angle during BD-ROM or DVD-Video
movie multi-angle scene playback (see page 23).
STANDBY/ON FL
DIMMER
OPEN/CLOSE
1
3
2
5
6
11 DISC NAVIGATOR/TOP MENU
Press to display the top menu of a BD-ROM or DVD-Video disc.
When playing a DVD-R/-RW disc, press to display/exit the Disc
Navigator.
HOME MEDIA
GALLERY
4
12 POPUP MENU/MENU
BD-ROM: Press to display/hide the pop-up menu.
DVD-Video: Press to display the disc menu (if there is one).
CLEAR
AUDIO
ENTER
OUTPUT
RESOLUTION
SUBTITLE ANGLE
DISPLAY
13 /// and ENTER
Use to navigate on-screen displays and menus. Press ENTER to
select an option or execute a command.
9
10
12
7
8
POPUP MENU
MENU
DISC NAVIGATOR
TOP MENU
14 HOME MENU
Press to display the player’s Home Menu, from which you can
access most of the player’s functions.
11
13
ENTER
HOME
MENU
RETURN
BLUE
14
16
17
15
15 RETURN
Press to return to a previous screen.
RED
GREEN YELLOW
16 Red/Green/Yellow/Blue
Use to navigate BD-ROM menus.
When playing a movie file on a DVD-R/-RW disc or media servers,
press the Blue button to switch the TV system frame rate (50 Hz/
60 Hz) (see About NTSC/PAL TV systems on page 20).
PLAY MODE
PHOTO ZOOM
18
21
19
20
17 Playback controls
VIDEO
ADJUST
TV CONTROL
: Press to start reverse/forward scanning.
: Press to start or resume playback.
INPUT
SELECT
CHANNEL VOLUME
(pause): Press to pause playback; press again to restart.
: Press to stop playback (you can resume playback by pressing
BD PLAYER
).
: Press to jump to the start of the previous/next chapter/
track.
1
STANDBY/ON
Press to switch the player on or into standby.
/
page 22).
: Use for slow motion and step frame (see
2
OPEN/CLOSE
Press to open or close the disc tray.
18 PLAY MODE
3
FL DIMMER
Press to change the Play Mode (repeat play, for example) (see
page 22).
Press to change the brightness of the display. When the display and
other indicators are off, the FL OFF indicator (page 16) lights.
19 PHOTO ZOOM
4
Number buttons
Press to zoom the screen when displaying a still image (see
page 23).
Use to enter title, chapter or track numbers, etc.
CLEAR: Press to clear a numeric entry, etc.
ENTER: Press to select an option or execute a command.
HOME MEDIA GALLERY
20 VIDEO ADJUST
Press to display the Video Adjust screen (see page 37).
5
21 TV CONTROL buttons
Press to display the Home Media Gallery screen (see page 30).
See also Setting up the remote to control your TV on page 46.
6
OUTPUT RESOLUTION
: Press to turn the TV on or into standby.
VOLUME +/–: Use to adjust the volume.
Press to switch the output resolution over HDMI and component
video outputs (see pages 12 and 23).
CHANNEL +/–: Use to select TV channel.
7
AUDIO
Press to select the audio channel or language (see page 23).
INPUT SELECT: Press to change the input function of the TV.
8
SUBTITLE
Press to select a subtitle display (see page 23).
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
04
Getting Started
Switching on and setting up
4
Press ENTER to start setting up using the Setup Navigator.
Setup Navigator
When you switch the player on for the first time the Setup Navigator
screen appears. We recommend using this to make a few basic
player settings.
Before using, make some simple
settings for the BD player.
Start
Cancel
Please use the Initial Setup if you
want to make more detailed settings.
STANDBY/ON
If you don’t want to use the Setup Navigator, press to select
Cancel, then press ENTER to exit the Setup Navigator.
5
Use the / buttons to select the output video resolution
then press ENTER.
Setup Navigator
Output Video Resolution
Auto
576i/480i
576p/480p
720p
ENTER
1080i
1080p
Source Direct
1
2
Switch on your TV and set the video input to this player.
If you connected this player to your TV using the HDMI connector,
select from Auto, 576i/480i (interlaced), 576p/480p (progressive),
720p, 1080i, 1080p, or Source Direct, then skip to step 7 (the
aspect ratio will automatically be set to 16:9 (Widescreen)).
Generally, the Auto setting is recommended.
Press the STANDBY/ON button on the remote control or
the front panel to switch on.
• It can take up to one minute for the unit to turn on.
• When you switch on for the first time, your TV should display the
Setup Navigator screen. (If the Setup Navigator doesn’t appear,
you can also access it from the Initial Setup menu; see page 41).
Setup Navigator
Output Video Resolution
• When you have this unit connected to a plasma television that is
compatible with HDMI Control, language settings are imported
from the plasma television’s OSD settings before Setup
Navigator begins.
S-Video/Video only
576i/480i
576p/480p
720p
1080i
Don't Know
3
Use the / buttons to choose a language, then press
ENTER.
If you’re using an S-Video or composite video connection, select S-
Video/Video only.
Setup Navigator
If you’re using a component video connection, match the output
setting with the capabilities of your TV. Select from: 576i/480i,
576p/480p, 720p, 1080i or Don’t Know. If you select 720p or
1080i, skip the next step since the aspect ratio will automatically be
set to 16:9 (Widescreen).
Language
English
français
Deutsch
Italiano
Español
6
Use the / buttons to select the aspect ratio of your TV
then press ENTER.
Setup Navigator
TV Aspect Ratio
16:9 (Widescreen)
4:3 (Standard)
If you have a widescreen TV, select 16:9 (Widescreen); if you have a
standard size TV, select 4:3 (Standard).
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Select ‘Finish Setup’ to accept the settings and exit the
4
Use the on-screen keypad to enter a name for the player.
04
Setup Navigator, or ‘Go Back’ to go through the settings again.
This is how the player will appear to connected devices on the local
area network.
Setup Navigator
Device
name input
Setup is complete!
Enjoy using your BD player!
Finish Setup
Go Back
SHFT
SPC
DEL
CLR
You can run the Setup Navigator at any time by selecting it from the
Options menu — see page 41.
• Use the /// buttons and ENTER to select characters
About the screen saver
If the player is stopped or paused for more than five minutes with no
other operation, the screen saver starts.
from the keypad.
• Select SHFT to toggle between upper and lower case.
• Select SPC to insert a space.
Once the screen saver has started, pressing any button on the front
panel or remote will clear it and return the player to normal
operation.
• Select DEL to delete the character at the current cursor position
in the name field.
The screen saver starts for CDs and music files after five minutes
pass without any commands input, whether or not playback has
been paused or stopped.
• Select CLR to clear the name field.
5
Select ‘DONE’ to register the name and exit the input
screen.
Select CANCEL to close the keypad without registering the name.
Using the on-screen displays
6
Select ‘IP Configuration’ then ‘Next Screen’ to display the
IP configuration screen.
This player makes extensive use of graphical on-screen displays
(OSDs). You should get used to the way these work as you’ll need to
use them when setting up the player, using some of the playback
features, and when making more advanced settings for audio and
video.
Initial Setup
Video Out
Audio Out
Language
Parental Lock
Network
IP Configuration
Auto set IP Address
Off
All the screens are navigated in basically the same way, using the
cursor buttons (///) to change the highlighted item and
pressing ENTER to select it.
IP Address
192 255 255
.
0
0
0
.
.
.
.
Subnet mask
Default gateway
255 255 255
.
.
.
Speakers
Options
192 168
.
1
Set the IP address.
Button
What it does
Display/exit the on-screen display
HOME MENU
///
ENTER
7
Set ‘Auto set IP Address’ to ‘On’.
If there is a DHCP server on the local area network (LAN), this player
will automatically be allocated an IP address. If you’re using a
broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function, select On. The IP
address will automatically be determined.
Changes the highlighted menu item
Selects the highlighted menu item
Returns to the previous menu or screen without
saving changes
RETURN
If there is no DHCP server on the network and you select On, this
player will use its own Auto IP function to determine the IP address.
Tip
• If you want to set the IP address manually, select Off then set
the IP Address, Subnet mask and Default gateway: Use the /
// buttons to select a field; use the number buttons to
enter a value. Press ENTER to finish and exit the screen.
• Information at the bottom of an OSD screen explains the
currently selected menu item and shows which buttons can be
used for that screen.
8
Press HOME MENU to exit the Initial Setup menu.
Setting up for network use
You should now be able to use the Home Media Gallery (accessible
from the Home Menu). See Using the Home Media Gallery on
page 30 for more.
If you’ve connected this player to a local area network (LAN) you may
need to make a few settings before you can use the Home Media
Gallery feature over the network.
• For information on DHCP refer to the network device’s operating
instructions.
• You may need to contact your service provider or network
administrator when manually entering an IP address.
1
2
3
Press HOME MENU and select ‘Initial Setup’.
Select ‘Network’.
Select ‘Device Name’ then ‘Next Screen’.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
When playing BD-ROM discs:
Playing movies, music and photos
04
• Commercially produced BD-ROM movie discs often go straight
to the disc menu when playback is started (sometimes preceded
by an opening sequence). Navigate through the disc menu
using the cursor keys (///) and the ENTER button. You
can also use the number buttons to select numbered items in
some menus.
Using this player, you can enjoy watching movies, listening to music
and browsing photos, from DVD discs or from a media server on the
network. How you navigate, browse and play content varies
according to the format of the content and the media:
• To play a DVD movie disc (i.e., one containing DVD-Video
application format), see Playing BD/DVD movies and Audio CD
below.
• To get back to the top menu, press TOP MENU.
• Some BD-ROM discs feature pop-up menus that do not
interrupt playback; press POPUP MENU/MENU to access
these.
• To play a DVD-R/-RW disc recorded with movie, music or photo
files, turn to Using the Disc Navigator on page 25.
When playing DVD-Video discs:
• To play content from a media server, please refer to Using the
Home Media Gallery on page 30.
• Commercially produced DVD movies often go straight to the
disc menu when playback is started (sometimes preceded by an
opening sequence). Navigate the disc menu using the cursor
(///) and ENTER buttons. You can also use the number
buttons to select numbered items in some menus.
Playing BD/DVD movies and Audio CD
The basic playback controls for playing BD/DVD movies and Audio
CD discs are covered here. Further functions are detailed in the next
chapter.
• To get back to the top menu, press TOP MENU.
• To get back to the disc menu, press POPUP MENU/MENU.
When playing Audio CDs:
• For more information see Playback controls on page 21.
STANDBY/ON
OPEN/CLOSE
5
When you’ve finished using the player, eject the disc and
switch the player back into standby.
• To open/close the disc tray, press OPEN/CLOSE. Remove the
disc before putting the player into standby.
• Press STANDBY/ON to switch the player into standby.
About NTSC/PAL TV systems
• The TV system setting is set to PAL when you turn the player on.
When video output in NTSC is played back, the TV system setting
is automatically changed. When video is stopped, playback is
resumed with video output in the last format used.
POPUP MENU
MENU
TOP MENU
• When playing a movie file on a DVD-R/-RW disc or media
servers, press the Blue button to switch the TV system frame
rate (50 Hz/60 Hz). Each press of the button switches 50 Hz and
60 Hz alternately. “NTSC” shows up in the front panel display
when NTSC is selected (it is not shown when PAL is selected).
ENTER
1
If the player isn’t already on, press STANDBY/ON to
switch it on.
Also turn on your TV and make sure that it is set to the correct video
input.
2
Press OPEN/CLOSE to open the disc tray.
3
Load a disc.
Load a disc with the label side facing up, using the disc tray guide
to align the disc (if you’re loading a double-sided DVD-Video disc,
load it with the side you want to play face down).
The player will take a short while to read the disc, after which the
disc type will show up in the front panel display.
4
Press to start playback.
• Use the (pause) and buttons to pause or stop playback. You
can resume playback in either case by pressing . See also
Resuming playback on page 21.
• See Playback controls on page 21 for other controls available
during playback.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• Some actions in the Disc Navigator/Home Media Gallery (such
as changing the Browse category) will cause the resume
position to be lost.
Playback controls
04
Scanning video and audio
CLEAR
ENTER
You can fast-scan BD/DVD movies or Audio CDs, forward or
backward at various speeds.
OUTPUT
RESOLUTION
AUDIO
SUBTITLE ANGLE
DISPLAY
1
During playback, press or to start scanning.
There is no sound while scanning video and audio.
2
Press repeatedly to increase the scanning speed.
The scanning speed is shown on-screen.
3
To resume normal playback, press .
Depending on the disc, normal playback may automatically resume
when a new chapter is reached on a BD/DVD movie disc.
Selecting titles, chapters and tracks directly
PLAY MODE
PHOTO ZOOM
CLEAR
ENTER
Resuming playback
You can select titles, chapters and tracks directly with BD, DVD
movies and Audio CDs .
1
The resume function offers a convenient way to restart playback
from where you stopped it previously.
•
Use the number buttons to select a title, chapter or track.
• If the disc is stopped, playback starts from the selected title or
track.
Resuming playback of BD/DVD movies and Audio CDs
If you stop playback before the end of the disc, the playback stop
position is stored so that you can resume watching the disc from the
same place later.
• If the disc is playing, playback jumps to the start of the selected
chapter or track.
• To resume playback, press . Playback will start from the stored
resume position. For Audio CDs, playback resumes from the
beginning of the track.
Skipping content
• Press again to cancel the resume function.
You can skip over content during playback of BD and DVD movies,
Audio CDs, movie and song files, and photo slideshows.
Note
1
•
During playback, press or to skip content.
• When playing a BD or DVD movie, playback jumps to the start of
the previous/next title, chapter or track. (If the disc is stopped,
playback will start.)
In the following case, the resume position is cleared:
• Eject the disc.
• Use Home Media Gallery/Disc Navigator.
• Switch the player off (DVD resume position remains saved).
• During movie or song file playback, the previous or next file will
start playing.
• Certain BD-ROM discs cannot be restarted from the position in
which they are paused.
• During photo slideshow playback, you can skip to the previous
or next photo.
Resuming playback of movie, music and photo files
Movie and music files are resumed from the start of the title/track
(rather than the stop position within the title/track): photo slideshow
playback is resumed from the photo file within the slideshow.
• If you interrupt playback of a movie or slideshow by pressing
RETURN to display the Disc Navigator or Home Media Gallery
screen, you can still resume playback of the same title/
slideshow photo using the button, regardless of what is
highlighted on the screen. (Use the ENTER button to start
playback of the currently highlighted item in the Disc Navigator/
Home Media Gallery.)
21
En
Note
1 With some titles on BD-ROM or DVD-Video discs it is not possible to jump to the start of the selected title or chapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Mode option compatibility
Playing video in slow motion
04
The available options depend on what kind of disc/file is playing
1
(=available/=unavailable):
You can play BD and DVD movies at different forward slow motion
speeds.
Disc/file type
Play Mode
DVD
PC File
PC File
PC File
Audio
CD
Option
BD-ROM
-Video (Music) (Movie) (Photo)
1
During playback, press to start slow motion playback.
• The slow motion speed is shown on-screen.
Time Search
Title Search
Repeat Chapter
Repeat Title
Repeat Track
Repeat All
• There is no sound during slow motion playback.
Press repeatedly to change the slow motion speed.
To resume normal playback, press .
Depending on the disc, normal playback may automatically resume
when a new chapter is reached.
2
3
Random
Video step forward and step reverse
Repeat Off
You can use step forward and step reverse when playing a BD or
DVD movie.
Using time search
1
2
3
During playback, press (pause).
Press or to move the video forward or back one step.
To resume normal playback, press .
CLEAR
ENTER
When playing a BD or DVD movie, normal playback may
automatically resume when a new chapter is reached.
You can navigate directly to a certain point in a BD or DVD movie, or
in a movie file.
1,2
Changing the Play Mode
PLAY MODE
1
During playback, press PLAY MODE and select ‘Time
Search’.
2
Use the number buttons to enter a time in hours, minutes
Use the PLAY MODE button on the remote control to select one of
the various playback modes for BD and DVD movie discs, Audio CD
discs, movie and music files and photo slideshows.
and seconds for playback to resume from.
For a BD or DVD movie, the time you enter should be the time into
the currently playing title. For a movie file it will be the playback time
into the file.
You can’t select a Play Mode while a BD or DVD disc menu is being
displayed, or while playing some BD/DVD movie titles, Audio CD, or
movie and music files and photo slideshows.
• For example, press 4, 5, 0, 0 to have playback start from 45
minutes into the title/file. For 1 hour, 20 minutes, press 1, 2, 0,
0, 0.
•
During playback, press PLAY MODE to change the Play
• Press CLEAR to clear the input.
Mode.
See Play Mode option compatibility below for the options available
with the disc/file you’re playing.
3
Press ENTER to start playback from the time you entered.
Using title search
•
•
Time Search (see Using time search below)
Title Search (see Using title search below)
•
•
•
Repeat Chapter (repeats the current chapter)
Repeat Title (repeats the current title)
Repeat Track (repeats the current track)
CLEAR
ENTER
T
1
You can directly jump to the start of any title on a BD-ROM or
DVD-Video.
1,2
1
During playback, press PLAY MODE and select ‘Title
•
•
Repeat All (repeats the current browse list)
Search’.
Random (play tracks from an Audio CD, music files, or
photo files in a random order)
2
Use the number buttons to select a title.
Press CLEAR to clear the input.
• Repeat Off (cancels the repeat and random modes)
3
Press ENTER to start playback of the title you selected.
The current Play Mode is displayed on-screen. Press CLEAR to
resume normal playback.
Note
22
1 With some BD-ROM and DVD-Video titles, it is not possible to select any Play Mode options.
2 This function may not be supported depending on the content or server software.
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• There may be a short delay after pressing the button for the
audio channel to change.
Switching camera angles
ANGLE
04
Some BD and DVD movies feature scenes shot from two or more
angles — check the disc box for details.
Tip
• Even when multiple audio streams are included in a movie file,
you cannot select from among them while playing back of a
movie file.
•
During playback, press
ANGLE to switch the angle.
• There may be a short delay after pressing the button before the
angle changes.
• To set audio language preferences, see page 40.
• Playback resumes if the angle is changed while paused.
Displaying disc or file information
DISPLAY
Zooming the screen
PHOTO ZOOM
Various track, chapter and title information, as well as the video
transmission rate for DVD and BD movies, can be displayed
on-screen. The information available depends on the type disc or
file, and whether it’s playing or stopped.
During playback of a photo slideshow you can zoom the screen to
2x view or 4x view.
1
During playback, press PHOTO ZOOM to change the zoom.
•
Press DISPLAY to show/switch the information displayed.
Press repeatedly to cycle through: normal 2x zoom 4x zoom.
3
Press DISPLAY repeatedly to change the displayed information.
2
Use the cursor keys (///) to move the zoomed area
Play
DVD-VIDEO
1–2
Chapter
Title Total
0 . 03 . 10
12
1h 28m 03s
Repeat Chapter
of the screen.
The zoom mode is cancelled when you stop playback.
DVD-Video Play display 1
Switching subtitles
SUBTITLE
Play
1–2
0 . 03 . 12
Repeat Chapter
DVD-VIDEO
Chapter Time 0 . 02 . 43
Chapter Total 0 . 03 . 16
10 . 08 Mbps
Some BD and DVD movie discs have subtitles in one or more
languages; the disc box will usually tell you which subtitle
languages are available.
DVD-Video Play display 2
Switching the output video resolution
1
1
Press
SUBTITLE repeatedly to select a subtitle option.
The current subtitle language/option is displayed on-screen and in
the front panel display.
Subtitle
1/2
English
OUTPUT
RESOLUTION
You can switch the output video resolution for HDMI and
component output.
2
To switch the subtitle display off, press
SUBTITLE then
CLEAR.
There may be a short delay after pressing the button before the
subtitles change.
•
Press OUTPUT RESOLUTION repeatedly to select an output
video resolution.
The current source and output video resolution are shown
on-screen.
Tip
Output Video Resolution: Source Direct
(1080 / 24p)
Source: 1080 / 24p
• To set subtitle language preferences, see page 40.
Switching audio streams/channels
Note
AUDIO
• Depending on your display, some of the settings may result in
the picture disappearing. In this case, press
OUTPUT RESOLUTION repeatedly until the picture re-appears.
Some BD and DVD movie discs contain multiple audio streams that
you can select on playback. These might be different audio
languages and/or different audio formats (such as a DTS
5.1-channel sound track and a Dolby Digital 2-channel sound track).
• See Changing the output video resolution on page 12 for more
information.
•
Press
AUDIO repeatedly to select an audio channel/
2
stream option.
The current option is shown on-screen.
Audio:
1/2 Dolby Digital 2/0ch
English
Switching audio languages on a BD/DVD movie
Note
1 Some discs only allow you to change the subtitle language from the disc menu. Press POPUP MENU/MENU to access.
2 Some discs only allow you to change the audio language from the disc menu. Press POPUP MENU/MENU to access.
3 There may be instances with some discs where no information can be displayed.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• My AV receiver is definitely compatible with 96 kHz Linear PCM
audio, but it doesn’t seem to work with this player. What’s wrong?
Frequently Asked Questions
04
192 kHz/96 kHz BD and 96 kHz DVD discs only output digital
audio downsampled to 48 kHz through the optical and coaxial
outputs.
• Why won’t the disc I loaded play?
First check that you loaded the disc the right way up (label side
up), and that it’s clean and not damaged. See Taking care of your
player and discs on page 44 for information on cleaning discs.
96 kHz 7.1ch BD discs only output digital audio downsampled to
48 kHz through HDMI output when video output is 576i/480i or
576p/480p over HDMI. These are not malfunctions.
If a disc loaded correctly won’t play, it’s probably an
incompatible format or disc type. See Disc/content format
playback compatibility on page 7 for more on disc compatibility.
• Why is the mono audio on some discs rather quiet compared to
other discs?
When mono audio is split into the L and R channels, there may
be a small loss of volume.
• There’s no picture!
Your TV is probably not compatible with the selected video
output resolution. Check your TV for compatibility with
progressive scan video and higher resolutions. Press the
OUTPUT RESOLUTION button to switch the video output. See
also Changing the output video resolution on page 12.
• There’s no sound when connected using HDMI!
You won’t hear any sound from the HDMI output if your
component is only DVI/HDCP-compatible.
• I can’t see any picture, or get high definition video output when
playing some BDs!
• I can’t connect to my local area network!
First of all check the settings of the media server you’re using.
Make sure that if you made the network settings automatically
on this player then you also select auto setup on the server.
(Likewise, if you made the settings manually on the server, you
should set up this player manually.)
When playing some discs, there may be no composite video,
S-Video and/or component video output, or high-definition
content may be converted to standard-definition 576i/480i or
576p/480p component output. This is for content protection. To
view the disc, connect the player to an HDMI-compatible
display. See Connecting for HDMI output on page 11.
• I have a widescreen TV so why are there black bars at the top and
bottom of the screen when I play some discs?
Some movie formats are such that even when played on a
widescreen TV, black bars appear at the top and bottom of the
screen. This is not a malfunction.
• I’ve connected to a HDMI/DVI compatible component but I can’t
get any signal and the front panel HDMI indicator won’t light!
Make sure that you’ve selected this player as the HDMI input in
the settings for the component you’re using. You may need to
refer to the instruction manual of the component to do this.
An HDMI connection can only be made with other HDMI
components, or a High-bandwidth Digital Content Protection
(HDCP)-compatible DVI component. See Connecting for HDMI
output on page 11 for more on HDMI compatibility.
• There’s no picture from the HDMI output!
Make sure the output resolution of this player matches that of
the component you have connected using HDMI. See Changing
the output video resolution on page 12.
• Why is the playback sample rate of the DVD only 48 kHz instead of
96 kHz?
Playback sample rate of the audio is downsampled to 48 kHz.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
05
Using the Disc Navigator
Use the Disc Navigator to browse through the PC files on a DVD-R/
-RW disc to find what you want to play. You can use the Disc
Navigator when a disc is playing or stopped.
Movie Navigator
The movie section of the Disc Navigator allows you to browse and
play all the compatible movie files stored on the loaded DVD-R/-RW
disc (non-movie files are not displayed).
Important
See also File compatibility on page 7 for more on compatible file
types.
• It’s not possible to use the Disc Navigator with DVD-Video discs,
or with Audio CDs.
1
If you haven’t already done so, select ‘Disc Navigator’ from
Introduction
the Home Menu, then ‘Movies’.
You should see a list of all the movie files found on the disc, together
with their playing times.
Most of the features described in this chapter make use of
on-screen displays. Navigate these using the /// and
ENTER. To go back to the previous menu or screen, use the RETURN
button. The button guide at the bottom of every screen shows which
buttons do what.
20 items
All Movies
Scallop-man 3
Closer
1:31
1:02
1:31
1:25
1:33
1:26
1:57
1:36
1:18
1:18
Discount store
School of legend
Advance in the future part-2
The EEL
Date: 2006
Genre: Action
Format:WMV
World Baseball
Dream on the way
Finding a southpaw
Dear Customer
DISC NAVIGATOR
TOP MENU
• When the movie length cannot be determined, it is displayed as
“-:--”.
ENTER
HOME
MENU
RETURN
2
Use the / buttons to change the current selection
(highlighted in yellow).
On the left side of the screen you can see file information, such as
the genre, date and file format, for the current selection.
3
Press ENTER to play the currently highlighted movie.
1
Press HOME MENU and select ‘Disc Navigator’ from the
Press to start or resume playback from the last title played.
on-screen display.
Alternatively, press DISC NAVIGATOR.
Displaying the Movie Options menu
Home Menu
•
Press to display the Movie Options menu:
Disc Navigator
Home Media Gallery
Video/Audio Adjust
Initial Setup
20 items
All Movies
Scallop-man 3
Closer
Movie Options
Play from Beginning
Add to Quicklist
Discount store
School of legend
Advance in the future part-2
The EEL
Date: 2006
Genre: Action
Format:WMV
World Baseball
Dream on the way
Finding a southpaw
Dear Customer
2
Select ‘Movies’, ‘Photos’ or ‘Music’.
See the sections below for more information on each of these.
• Play from Beginning: Play the selected movie from the
beginning.
Disc Navigator
•
Add to Quicklist: Add the selected movie to your Quicklist. The
Quicklist feature is a useful way to organize movie files for handy
selection and playback. The Quicklist can contain up to 25 movies.
1
Movies
Photos
Music
3
Press HOME MENU to exit the Disc Navigator screen.
25
En
Note
1 Quicklists are lost when you exit Movie Navigator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching movies
Displaying the browse menu
05
From the Search sub-menu you can enter a few (up to 20) characters
of a movie title or genre. As each character is entered into the
search field the search results are dynamically updated, narrowing
down the list of movies until you can see the one you’re looking for.
•
Press to display the browse menu:
20 items
All Movies
Scallop-man 3
1:31
1:02
1:31
1:25
1:33
1:26
1:57
1:36
1:18
1:18
Closer
Loading ...
Discount store
School of legend
Advance in the future part-2
Search Results
4 items
Scallop-man 3
Say No
1:31
1:02
1:31
1:33
All Movies
The EEL
Browse
School of legend
Seesaw
World Baseball
Search
Sort
Dream on the way
Finding a southpaw
Dear Customer
S _
Depending on the browse menu, certain options may not be
selectable.
Enter
Home Menu
Exit
Select
• All Movies: Display all movie files found on the disc.
• Use the /// and ENTER buttons to select characters
from the keypad.
• Browse: Browse movies by Genre, Quicklist, or Folders. See
also Browsing movies below.
• Select SHFT to toggle between upper and lower case.
• Search: Find a movie by entering a name (or a few letters) to
search for. The search results are narrowed down as you enter
more letters. See also Searching movies below.
• Select SPC to insert a space.
• Select DEL to delete the character at the current cursor position
in the search field.
• Sort: Sort movies by date (oldest first or most recent first) or
alphabetically by title or genre (‘A’ first or ‘Z’ first).
• Select CLR to clear the search field.
• Select DONE to close the keypad and select movies or genres
from the search results; select CANCEL to close the keypad and
clear the search results.
Browsing movies
The browse sub-menu gives you three ways to browse movies.
All Movies
20 items
Photo Navigator
Scallop-man 3
Closer
1:31
1:02
1:31
1:25
1:33
1:26
1:57
1:36
1:18
1:18
Discount store
School of legend
Advance in the future part-2
The EEL
The photo section of the Disc Navigator allows you to browse and
display all the compatible photo files found on the loaded DVD-R/
-RW disc (non-photo files are not displayed).
Go back
Genres
Quicklist
Folders
World Baseball
Dream on the way
Finding a southpaw
Dear Customer
See also File compatibility on page 7 for more on compatible file
types.
• Go back: Return to the previous menu.
1
If you haven’t already done so, select ‘Disc Navigator’ from
the Home Menu, then ‘Photos’.
You should see a list of folders/photo files from the disc.
• Genre: Display all movie genres and how many movies are in
each one. Select a genre and press ENTER to see the list of
movies in that genre.
2
Use the / buttons to change the current selection
• Quicklist: Display a list of all the movies currently in your
Quicklist. Press to display the Movie Options menu, where
you can start playback or remove movies from the Quicklist:
(highlighted in yellow).
Folders
6 items
Folder1
Folder2
File1
20 items
Quicklist
Scallop-man 3
Closer
Movie Options
Play from Begining
Remove
File2
Discount store
School of legend
Advance in the future part-2
The EEL
File3
Date: 2006
Genre: Action
Format:WMV
File4
World Baseball
Dream on the way
Finding a southpaw
Dear Customer
3
Select a folder and press ENTER to see the list of photos and
subfolders within the folder.
• Folders: Display a list of folders and movie files. Select a folder
and press ENTER to see the list of subfolders/movies files in that
folder.
30 items
Folder1
Go back
file_001
file_002
file_003
file_004
file_005
file_006
file_007
file_008
file_009
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Use the / buttons to change the current selection
Browsing photos
The browse sub-menu gives you several ways to browse photos.
05
(highlighted in yellow).
• Press ENTER to start full-screen slideshow playback from the
currently selected photo.
30 items
Folder1
• Press to start or resume slideshow playback from the last
photo displayed.
Go back
file_001
file_002
file_003
file_004
Displaying the Photo Options menu
Go back
file_005
Date
file_006
Quicklist
file_007
Folders
file_008
•
Press to display the Photo Options menu.
• Press ENTER to display the Photo Options menu when
displaying photos in thumbnail view.
file_009
• Go back: Return to the previous menu.
• Date: Browse photos as thumbnails by date (year and month).
Select a year then press ENTER to further browse by month.
Select a month and press ENTER to see the photos taken that
month.
30 items
Folder1
Go back
file_001
file_002
file_003
file_004
file_005
file_006
file_007
file_008
file_009
Photo Options
Slideshow
Add to Quicklist
Date: 1/23/2006
Resolution: 196 x 298
Format: JPEG
• Quicklist: Display thumbnails of all the photos currently in your
Quicklist. Press ENTER to display the Photo Options menu,
from where you can start slideshow playback or remove photos
from the Quicklist:
• Slideshow: Start full-screen slideshow playback from the
currently selected photo. During the slideshow, press to
advance to the next photo; to go back to the previous photo;
(pause) to pause the slideshow; to stop and exit the
slideshow; PHOTO ZOOM to enlarge the picture on the screen.
25 items
Quicklist
Photo Options
Slideshow
Remove
File: sample.jpg
Date: 1/23/2006
Resolution: 196 x 298
Format: JPEG
• Add to Quicklist: Add the selected photo to your Quicklist. The
Quicklist feature is a useful way to organize photos for handy
selection and slideshow playback. The Quicklist can contain up
1
to 25 photos.
• Folders: Display a list of folders and photo files on the disc.
Select a folder and press ENTER to see the subfolders/photos.
Displaying the browse menu
•
Press to display the browse menu.
• From the left-most column, press to display the browse menu
when displaying photos in thumbnail view:
Searching photos
From the Search sub-menu you can enter a few (up to 20) characters
of a photo title. As each character is entered into the search field the
search results are dynamically updated, narrowing down the list of
photos until you can see the one you’re looking for.
30 items
Folder1
Go back
file_001
file_002
file_003
5 items
Search Results
file_004
All Photos
file_005
Browse
file_006
Search
file_007
Sort
file_008
R _
file_009
Depending on the browse menu, certain options may not be
selectable.
Home Menu
Exit
• All Photos: Display all photos found on the disc as thumbnail
files.
See Searching movies on page 26 for how to use the screen keypad.
• Browse: Browse photos by Date, Quicklist or Folders. See also
Browsing photos below.
• Search: Find a photo by entering a name (or a few letters) to
search for. The search results are narrowed down as you enter
more letters. See also Searching photos on page 27.
• Sort: Sort photos by date (oldest first or most recent first), or
alphabetically by name (‘A’ first or ‘Z’ first).
27
En
Note
1 Quicklists are lost when you exit Photo Navigator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the Song Options menu
Music Navigator
05
•
Press to display Song Options menu:
The music section of the Disc Navigator allows you to browse and
play all the compatible music files found on the loaded DVD-R/-RW
disc (non-music files are not displayed).
Acoustic Guitar
20 items
Song Options
Electrified
See also File compatibility on page 7 for more on compatible file
types.
End Of The Road
Into The Arena
Keep On Running
Never Let You Go
Open Your Eyes
Pictures Of My Life
Real Sound
Play song
Add to Quicklist
Art
A
is
r
t
t
:
is
P
t:
i
D
o
e
n
p
e
e
e
c
r
he
A
M
ll
ode
Stars
Album: Remixes 81-04
Album: Acoustic Guitar
Genre: Alternative
Genre: Rock
Format:WMA
1
If you haven’t already done so, select ‘Disc Navigator’ from
Format:WMA
the Home Menu, then ‘Music’.
You should see a list of the artist names on the disc.
Rush Street
Take The Time
• Play Song: Play the selected song from the beginning.
20 items
Artists
• Add to Quicklist: Add the selected song to your Quicklist. The
Quicklist feature is a useful way to organize music files for handy
selection and playback. The Quicklist can contain up to 25
All Artists
Black Pappers
1
2
4
1
1
1
4
2
5
Album
Albums
Albums
Album
Album
Album
Albums
Albums
Albums
David Jack
Eric Gilberto
King
1
songs.
Michael Beck
Pioneer All Stars
Rock'n Roll Brothers
The Fishes
Displaying the browse menu
Treetop
•
Press to display the browse menu:
2
Use the / buttons to change the current selection
(highlighted in yellow).
20 items
Acoustic Guitar
Electrified
9:31
8:00
7:31
3:55
6:33
5:26
4:57
9:36
6:18
6:18
3
Press ENTER to display the album list.
End Of The Road
Into The Arena
Keep On Running
Never Let You Go
20 items
Pioneer All Stars
All Songs
Open Your Eyes
Browse
Pictures Of My Life
Search
All Albums
Real Sound
Sort
Acoustic Guitar
Best of Pioneer All Sta
Cooking Or Eating
Family
rs
20 Songs
13 Songs
10 Songs
12 Songs
18 Songs
11 Songs
18 Songs
10 Songs
13 Songs
Rush Street
Now Playing
Take The Time
Good!!
Depending on the browse menu, certain options may not be
selectable.
Morning Glory
Poker Face
Song forYou
Tokyo
• All Songs: Display all songs (files/tracks) found on the disc.
• Browse: Browse songs by Artists, Albums, Genres, Quicklist
or Folders. See also Browsing songs on page 29.
4
Select the album you want to listen to and press ENTER to
display the song list.
• Search: Find a song by entering a name (or a few letters) to
search for. The search results are narrowed down as you enter
more letters. See also Searching songs on page 29.
20 items
Acoustic Guitar
Electrified
9:31
8:00
7:31
3:55
6:33
5:26
4:57
9:36
6:18
6:18
End Of The Road
Into The Arena
Keep On Running
Never Let You Go
Open Your Eyes
Pictures Of My Life
Real Sound
• Sort: Sort songs by date (oldest first or most recent first), or
alphabetically by song title, artist, album or genre (‘A’ first or ‘Z’
first).
Artist: Pioneer All Stars
Album: Acoustic Guitar
Genre: Rock
Format:WMA
• Now Playing: Display song information (track name, artist,
album, genre, etc.) and playback information. See also Now
playing song information on page 29.
Rush Street
Take The Time
• When the song length cannot be determined, it is displayed as
“-:--”.
5
Use the / buttons to change the current selection
(highlighted in yellow).
On the left side of the screen you can see file information, such as
the artist and album name, genre and file format, for the current
selection.
6
Press ENTER to play the currently highlighted music.
The display shows the Now Playing screen.
• Press to start or resume playback from the last track played
on the Now Playing screen.
28
En
Note
1 Quicklists are lost when you exit Music Navigator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Browsing songs
The browse sub-menu gives you various ways to browse songs.
Now playing song information
The Now Playing screen shows detailed information about the song
playing, including:
05
• Artist and song title
• Progress bar (elapsed time and song length)
• Album name
20 items
Acoustic Guitar
Electrified
9:31
8:00
7:31
3:55
6:33
5:26
4:57
9:36
6:18
6:18
End Of The Road
Into The Arena
Keep On Running
Never Let You Go
Open Your Eyes
Pictures Of My Life
Real Sound
• Genre
All Songs
Browse
Search
• File format
Sort
Rush Street
Now Playing
• Browse menu
Take The Time
• Play status
• Go back: Return to the previous menu.
• Play mode
• Artists: Display a list of artists, and how many albums are
associated with each. Select an artist and press ENTER to see
the album list by that artist.
• Next/Previous song names
Now Playing
• Albums: Display a list of albums, and how many songs are
associated with each. Select an album and press ENTER to see
the list of songs on that album.
Pioneer All Stars
Real Sound
Acoustic Guitar
Genre: Rock
Format: MP3
3:10 / 5:51
• Genres: Display all music genres, and how many songs are in
each one. Select a genre and press ENTER to see the list of
artists in that genre.
All Songs
Browse
Search
Sort
Now Playing
Previous Song
Pictures Of My
Next Song
Rush Street
• Quicklist: Display a list of all the songs currently in your
Quicklist. Press to display the Song Options menu, where
you can start playback or remove songs from the Quicklist:
20 items
Quicklist
Electrified
Song Options
End Of The Road
Into The Arena
Keep On Running
Never Let You Go
Open Your Eyes
Pictures Of My Life
Real Sound
Play Song
Remove
Artist: Pioneer All Stars
Album: Acoustic Guitar
Genre: Rock
Format: WMA
Rush Street
Take The Time
• Folders: Display a list of folders and song files. Select a folder
and press ENTER to see the list of subfolders/songs.
Searching songs
From the Search sub-menu you can enter a few characters (up to 20)
of a song title, genre, artist, or album. As each character is entered
into the search field the search results are dynamically updated,
narrowing down the list until you can see the one you’re looking for.
Loading ...
4
items
Search Results
Scallop-man 3
Say No
1:31
1:02
1:31
1:33
School of legend
Seesaw
S _
Enter
Home Menu
Exit
Select
See Searching movies on page 26 for how to use the screen keypad.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
06
Using the Home Media Gallery
The Digital Living Network Alliance (DLNA) is a cross-industry
Introduction
organization of consumer electronics, computing industry and
mobile device companies. Digital Living provides consumers with
easy sharing of digital media through a wired or wireless network in
the home.
The Home Media Gallery allows you to browse and play movies,
music and photos stored on media servers connected on an
identical Local Area Network (LAN) as the player. This unit allows for
the playing of files stored on the following:
The DLNA certification logo makes it easy to find products that
comply with the DLNA Interoperability Guidelines. This unit
complies with DLNA Interoperability Guidelines v1.0.
• PCs running Microsoft Windows XP with Windows Media
Connect installed
When a PC running DLNA server software or other
DLNA-compatible device is connected to this player, some setting
changes of software or other devices may be required. Please refer
to the operating instructions for the software or device for more
information.
• PCs running Microsoft Windows Vista or XP with Windows
Media Player 11 installed
• DLNA-compatible digital media servers (on PCs or other
components)
TM
• DLNA and DLNA CERTIFIED are trademarks and/or service
marks of Digital Living Network Alliance.
About network playback
Content playable over a network
The network playback function of this unit uses the following
technologies:
Even when encoded in a compatible format, some files may not play
correctly. See File compatibility on page 7. Some functions may not
be supported depending on the server type or version used.
Windows Media Player 11/Windows Media Connect
See About Windows Media Player 11/Windows Media Connect on
page 36 for details.
Supported file formats vary by server. As such, files not supported by
your server are not displayed on this unit.
For more information check with the manufacturer of your server.
Windows Media DRM
About playback behavior over a network
• Playback may stall when the PC is switched off or any media
files stored on it are deleted while playing content.
Microsoft Windows Media Digital Rights Management (WMDRM) is
a platform to protect and securely deliver content for playback on
computers, portable devices and network devices. Home Media
Gallery functions as a WMDRM 10 for networked devices.
WMDRM-protected content can only be played on media servers
supporting WMDRM.
• If there are problems within the network environment (heavy
network traffic, etc.) content may not be displayed or played
properly (playback may be interrupted or stalled). For best
performance, a 100BASE-TX connection between player and PC
is recommended.
• Content owners use WMDRM technology to protect their
intellectual property, including copyrights. This device uses
WMDRM software to access WMDRM-protected content. If the
WMDRM software fails to protect the content, content owners
may ask Microsoft to revoke the software’s ability to use WMDRM
to play or copy protected content. Revocation does not affect
unprotected content. When you download licenses for protected
content, you agree that Microsoft may include a revocation list
with the licenses. Content owners may require you to upgrade
WMDRM to access their content. If you decline an upgrade, you
will not be able to access content that requires the upgrade.
• Playback performance will vary with the power and condition
(seek time of the hard disk, etc.) of the PC being used.
• If several clients are playing simultaneously, as the case may be,
playback is interrupted or stalled.
• Depending on the security software installed on a connected PC
and the setting of such software, network connection may be
blocked.
• Problems with the PC may cause malfunctions.
• This product is protected by certain intellectual property rights of
Microsoft. Use or distribution of such technology outside of this
product is prohibited without a license from Microsoft.
Pioneer is not responsible for any malfunction of the player and/or
the Home Media Gallery features due to communication error/
malfunctions associated with your network connection and/or your
PC, or other connected equipment. Please contact your PC
manufacturer or Internet service provider.
DLNA
About the network settings
This unit uses DHCP and Auto IP functionality to make all the
network settings automatically.
If you are using a broadband router or a broadband modem with a
DHCP server function, setup should be completely automatic with
no manual settings required.
TM
• DLNA CERTIFIED Audio/Video/Image Player
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Home Media Gallery
Movie Navigator
06
Before using the Home Media Gallery, make sure that you have
connected the player to the network and made the necessary
settings. See Network connection on page 14 and Setting up for
network use on page 19 for more information.
From the movie section of the Home Media Gallery you can browse
and play all the compatible movie files found on your local area
network (non-movie files are not displayed).
See also File compatibility on page 7 for more on compatible file
types.
HOME MEDIA
GALLERY
1
If you haven’t already done so, select ‘Home Media Gallery’
from the Home Menu, then ‘Movies’.
You should see a list of all the movie files found on the selected
server, together with their playing times.
1214 items
All Movies
Scallop-man 3
Closer
1:31
1:02
1:31
1:25
1:33
1:26
1:57
1:36
1:18
1:18
Discount store
School of legend
Advance in the future part-2
The EEL
Date: 12/01/2006
Genre: Adventure
Format:WMV
ENTER
HOME
MENU
RETURN
World Baseball
Dream on the way
Finding a southpaw
Dear Customer
1
Press HOME MENU and select ‘Home Media Gallery’ from
• When the movie length cannot be determined, it is displayed as
“-:--”.
the on-screen display.
2
Use the / buttons to change the current selection
Home Menu
(highlighted in yellow).
On the left side of the screen you can see file information, such as
the genre, date and file format, for the current selection.
Disc Navigator
Home Media Gallery
Video/Audio Adjust
Initial Setup
3
Press ENTER to play the currently highlighted movie.
Press to start or resume playback from the last title played.
Displaying the Movie Options menu
•
Press to display the Movie Options menu:
• Alternatively, press HOME MEDIA GALLERY.
• The Home Media Gallery is only available when the network or
server contains movies, photos or music files.
1214 items
All Movies
Scallop-man 3
Movie Options
Closer
Play from Beginning
Add to quicklist
2
Select ‘Movies’, ‘Photos’ or ‘Music’.
Discount store
School of legend
Advance in the future part-2
The EEL
Date: 12/01/2006
Genre: Adventure
Format: WMV
Home Media Gallery
World Baseball
Dream on the way
Finding a southpaw
Dear Customer
Movies
Photos
Music
• Play from Beginning: Play the selected movie from the
beginning.
• Add to Quicklist: Add the selected movie to your Quicklist. The
Quicklist feature is a useful way to organize movie files for handy
selection and playback. The Quicklist can contain up to 25
1
movies.
• On selecting an option, a list of movies, photos or music files
that the player finds on the selected server is displayed. From
here you can browse, play and sort network files.
• See the sections below for more information on each part of the
Home Media Gallery.
3
Press HOME MENU to exit the Home Media Gallery screen.
Note
1 Quicklists are lost in the following instances:
• When you exit Movie Navigator.
31
• When you change the server to which you are connected.
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching movies
Displaying the browse menu
06
From the Search sub-menu you can enter a few (up to 20) characters
of a movie title or genre. As each character is entered into the
search field the search results are dynamically updated, narrowing
down the list of movies until you can see the one you’re looking for.
•
Press to display the browse menu:
1214 items
All Movies
Scallop-man 3
1:31
1:02
1:31
1:25
1:33
1:26
1:57
1:36
1:18
1:18
Closer
Discount store
School of legend
Advance in the future part-2
4 items
Search Results
Scallop-man 3
Say No
1:31
1:02
1:31
1:33
All Movies
The EEL
Browse
School of legend
Seesaw
World Baseball
Search
Dream on the way
Sort
Finding a southpaw
S _
Movie Sources
Dear Customer
Depending on the browse menu, certain options may not be
selectable.
Home Menu
Exit
• All Movies: Display all movie files found on the selected server.
• Use the /// and ENTER buttons to select characters
from the keypad.
• Browse: Browse movies by Genre, Quicklist or Folders. See
also Browsing movies below.
• Select SHFT to toggle between upper and lower case.
• Search: Find a movie by entering a name (or a few letters) to
search for. The search results are narrowed down as you enter
more letters. See also Searching movies below.
• Select SPC to insert a space.
• Select DEL to delete the character at the current cursor position
in the search field.
• Sort: Sort movies by date (oldest first or most recent first), or
alphabetically by title or genre (‘A’ first or ‘Z’ first).
• Select CLR to clear the search field.
• Movie Sources: Display servers on the network. See also Movie
sources below.
• Select DONE to close the keypad and select a movie or genre
from the search results; select CANCEL to close the keypad and
clear the search results.
Browsing movies
The Browse sub-menu gives you three ways to browse movies.
Movie sources
From the movie sources window you can see all the servers found
on the network and change the selected server.
1214 items
All Movies
Scallop-man 3
1:31
1:02
1:31
1:25
1:33
1:26
1:57
1:36
1:18
1:18
Current server
Closer
Discount store
School of legend
Advance in the future part-2
The EEL
Go back
Genres
Quicklist
Folders
3 items
Movie Sources
World Baseball
Dream on the way
Finding a southpaw
Dear Customer
Family Room Media Center
Living Room DVD Recorder
Den Computer
WMC
DLNA
WMC
Microsoft
Windows Media Connect
2.0
192.168.11.2
Authorized
• Go back: Return to the previous menu.
• Genres: Display all movie genres and how many movies are in
each one. Select a genre and press ENTER to see the list of
movies in that genre.
Pause
SomeSongTil 3:30
Home Menu
Exit
• Quicklist: Display a list of all the movies currently in your
Quicklist. Press to display the Movie Options menu, where
you can start playback or remove movies from the Quicklist:
• Some servers found on the network may not be available for the
following reasons:
– The player is collecting file information from the server.
– There are no playable movie files on the server.
– This player is not authorized for the server. See also
Authorizing this player on page 36.
24 items
Quicklist
Scallop-man 3
Movie Options
Closer
Play from Beginning
Remove
Discount store
School of legend
Advance in the future part-2
The EEL
• Servers not currently available appear with a lock icon ( ) in the
server list.
Date: 12/01/2006
Genre: Adventure
Format: WMV
World Baseball
Dream on the way
Finding a southpaw
Dear Customer
• Folders: Display a list of folders and movie files. Select a folder
and press ENTER to see the list of movies and subfolders within
the folder. (The folder configuration may change depending on
the server type.)
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the browse menu
From the left-most column, press to display the Browse
Photo Navigator
06
•
The photo section of the Home Media Gallery allows you to browse
and display all the compatible photo files found on your local area
network (non-photo files are not displayed).
menu:
Summer_Vacation
1214 items
See also File compatibility on page 7 for more on compatible file
types.
1
If you haven’t already done so, select ‘Home Media Gallery’
All Photos
Browse
from the Home Menu, then ‘Photos’.
You should see a list of albums from the selected server.
Search
Sort
Photo Sources
Albums
6 items
Depending on the browse menu, certain options may not be
selectable.
Family
My_Favorite
School
Sports
• All Photos: Display all photos found on the server.
Summer_Vacation
Winter_Vacation
• Browse: Browse photos by Albums, Date, Quicklist or Folders.
See also Browsing photos below.
• Search: Find a photo by entering a name (or a few letters) to
search for. The search results are narrowed down as you enter
more letters. See also Searching photos on page 34.
2
Use the / buttons to change the current selection
(highlighted in yellow).
• Sort: Sort photos by date (oldest first or most recent first), or
alphabetically by name (‘A’ first or ‘Z’ first).
3 Press ENTER to display the selected photo list.
• Photo Sources: Display servers on the network. See also Photo
sources on page 34.
Summer_Vacation
1214 items
Browsing photos
The Browse sub-menu gives you several ways to browse photos.
File: sample.jpg
Date: 12/06/2006
Resolution: 2196
Format: JPEG
x
1298
Summer_Vacation
1214 items
4
Use the /// buttons to change the current
Go back
Albums
Date
thumbnail selection (highlighted in yellow).
Press to start or resume slideshow playback from the last photo
displayed.
Quicklist
Folders
• Go back: Return to the previous menu.
Displaying the Photo Options menu
• Albums: Display a list of server albums.
•
Press ENTER to display the Photo Options menu:
• Date: Browse photos by date (year and month). Select a year
then press ENTER to further browse by month. Select a month
and press ENTER to see the photos taken that month.
Summer_Vacation
1214 items
Photo Options
• Quicklist: Display thumbnails of all the photos currently in your
Quicklist. Press ENTER to display the Photo Options menu,
where you can start slideshow playback or remove photos from
the Quicklist:
Slideshow
Add to Quicklist
File: sample.jpg
Date: 12/06/2006
Resolution: 2196 x 1298
Format: JPEG
Quicklist
24 items
Photo Options
• Slideshow: Starts full-screen slideshow playback from the
currently selected photo. During the slideshow, press to
advance to the next photo; to go back to the previous photo;
(pause) to pause the slideshow; to stop and exit the
slideshow; PHOTO ZOOM to enlarge the picture on the screen.
Slideshow
Remove
File: sample.jpg
Date: 12/06/2006
Resolution: 2196 x 1298
Format: JPEG
• Add to Quicklist: Add the selected photo to your Quicklist. The
Quicklist feature is a useful way to organize photos for handy
selection and slideshow playback. The Quicklist can contain up
1
to 25 photos.
Note
1 Quicklists are lost in the following instances:
• When you exit Photo Navigator.
33
• When you change the server to which you are connected.
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• Folders: Display a list of folders and photo files. Select a folder
and press ENTER to see a list of photos and subfolders within
the folder. (The folder configuration may change depending on
the server type.)
2
Use the / buttons to change the current selection
06
(highlighted in yellow).
3
Press ENTER to display the album list.
Searching photos
Pioneer All Stars
1214 items
From the Search sub-menu you can enter a few (up to 20) characters
of a photo title. As each character is entered into the search field the
search results are dynamically updated, narrowing down the list of
photos until you can see the one you’re looking for.
All Albums
Acoustic Guitar
Best of Pioneer All Stars
Cooking Or Eating
Family
20 Songs
13 Songs
10 Songs
12 Songs
18 Songs
11 Songs
18 Songs
10 Songs
13 Songs
Good!!
Morning Glory
Poker Face
Song forYou
Tokyo
Loading...
Search Results
5 items
4
Select the album you want to listen to and press ENTER to
display the song list.
R _
Acoustic Guitar
1214 items
Electrified
9:31
8:00
7:31
3:55
6:33
5:26
4:57
9:36
6:18
6:18
Home Menu
Exit
End Of The Road
Into The Arena
Keep On Running
Never Let You Go
Open Your Eyes
Pictures Of My Life
Real Sound
Artist: Pioneer All Stars
Album: Acoustic Guitar
Genre: Rock
See Searching movies on page 32 for how to use the screen keypad.
Format:WMA
Photo sources
Rush Street
Take The Time
From the photo sources window you can see all the servers found on
the network and change the selected server. See Movie sources on
page 32 for more information.
• When the song length cannot be determined, it is displayed as
“-:--”.
Music Navigator
5
Use the / buttons to change the current selection
(highlighted in yellow).
On the left side of the screen you can see file information, such as
the artist and album name, genre and file format, for the current
selection.
From the music section of the Home Media Gallery you can browse
and play all the compatible song files found on your local area
network (non-music files are not displayed).
See also File compatibility on page 7 for more on compatible file
types.
6
Press ENTER to play the currently highlighted music.
The display shows the Now Playing screen.
• Press to start or resume playback from the last track played
1
If you haven’t already done so, select ‘Home Media Gallery’
on the Now Playing screen.
from the Home Menu, then ‘Music’.
You should see a list of all the artist names found on the selected
server.
Displaying the Song Options menu
•
Press to display Song Options menu:
Artists
1214 items
All Artists
1214 items
Song Options
Acoustic Guitar
Black Pappers
1
2
4
1
1
1
4
2
5
Album
Albums
Albums
Album
Album
Album
Albums
Albums
Albums
David Jack
Electrified
Eric Gilberto
King
End Of The Road
Into The Arena
Keep On Running
Never Let You Gohe
Open Your Eyes
Pictures Of My Life
Real Sound
Play song
Add to Quicklist
Michael Beck
Pioneer All Stars
Rock'n Roll Brothers
The Fishes
Artist: Pioneer All Stars
Artist:Depeche Mode
Album: Remixes 81-04
Album: Acoustic Guitar
Genre: Alternative
Genre: Rock
Format:WMA
Format:WMA
Treetop
Rush Street
Take The Time
• Play Song: Play the selected song from the beginning.
• Add to Quicklist: Add the selected song to your Quicklist. The
Quicklist feature is a useful way to organize music files for handy
selection and playback. The Quicklist can contain up to 25
1
songs.
Note
1 Quicklists are lost in the following instances:
• When you exit Music Navigator.
34
• When you change the server to which you are connected.
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• Quicklist: Display a list of all the songs currently in your
Quicklist. Press to display the Song Options menu, where
you can start playback or remove songs from the Quicklist:
Displaying the browse menu
Press to display the browse menu:
06
•
1214 items
Acoustic Guitar
Quicklist
24 items
Song Options
Electrified
9:31
8:00
7:31
3:55
6:33
5:26
4:57
9:36
6:18
6:18
Electrified
End Of The Road
Into The Arena
Keep On Running
Never Let You Go
Open Your Eyes
Pictures Of My Life
Real Sound
End Of The Road
Play song
Remove
Into The Arena
Keep On Running
Never Let You Go
Open Your Eyes
Pictures Of My Life
Real Sound
Artist: Pioneer All Stars
Album: Acoustic Guitar
Genre: Rock
All Songs
Browse
Format: WMA
Search
Browse menu
Sort
Rush Street
Now Playing
Music Sources
Rush Street
Take The Time
Take The Time
Depending on the browse menu, certain options may not be
selectable.
• Folders: Display a list of folders and song files. Select a folder
and press ENTER to see the list of songs and subfolders within
the folder. (The folder configuration may change depending on
the server type.)
• All Songs: Display all songs (files/tracks) found on the server.
• Browse: Browse songs by Artists, Albums, Genres, Playlists,
Quicklist or Folders. See also Browsing songs below.
Searching songs
• Search: Find a song by entering a name (or a few letters) to
search for. The search results are narrowed down as you enter
more letters. See also Searching songs below.
From the Search sub-menu you can enter a few characters (up to 20)
of a song title, genre, artist or album. As each character is entered
into the search field the search results are dynamically updated,
narrowing down the list of songs until you can see the one you’re
looking for.
• Sort: Sort songs by date (oldest first or most recent first), or
alphabetically by song title, artist, album or genre (‘A’ first or ‘Z’
first).
Loading···
• Now Playing: Display song information (track name, artist,
album, genre, etc.) and playback information. See also Now
playing song information on page 35.
Search Results
4 items
Reason
1:31
1:02
1:31
1:25
Real Sound
Rolling Dice
Rush Street
• Music Sources: Display servers on the network. See also Music
R _
sources on page 35.
Browsing songs
The browse sub-menu gives you various ways to browse songs.
Home Menu
Exit
See Searching movies on page 32 for how to use the screen keypad.
1214 items
Acoustic Guitar
Electrified
9:31
8:00
7:31
3:55
6:33
5:26
4:57
9:36
6:18
6:18
End Of The Road
Into The Arena
Keep On Running
Never Let You Go
Open Your Eyes
Pictures Of My Life
Real Sound
Now playing song information
The Now Playing screen shows detailed information about the
song playing, including:
Go back
Artists
Browse
sub-menu
Albums
Genres
Playlists
Quicklist
Folders
• Artist and song title
• Progress bar (elapsed time and song length)
• Album name
Rush Street
Take The Time
• Go back: Return to the previous menu.
• Genre
• Artists: Display a list of artists, and how many albums are
associated with each. Select an artist and press ENTER to see
the album list by that artist.
• File format
• Browse menu
• Play status
• Albums: Display a list of albums, and how many songs are
associated with each. Select an album and press ENTER to see
the list of songs on that album.
• Play mode
• Next/Previous song names
• Genres: Display all music genres, and how many songs are in
each one. Select a genre and press ENTER to see the list of
artists in that genre.
Now Playing
• Playlists: Display the server Playlists.
Pioneer All Stars
Real Sound
Acoustic Guitar
Genre: Rock
Format: MP3
3:10 / 5:51
All Songs
Browse
Search
Sort
Now Playing
Music Sources
Previous Song
Pictures Of My
Next Song
Rush Street
Music sources
From the music sources window you can see all the servers found
on the network and change the selected server. See Movie sources
on page 32 for more information.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
First entering Movie, Photo or Music Navigator
After powering on this player and entering the Movie, Music or
Photo Navigator, you may be presented with the Folders screen.
This is due to this player compiling a list of the available media on
your media servers. This list will vary depending on the media
sharing software you are using, but you will be able to navigate
through the list using the / buttons, the ENTER key to select a
folder, or the ENTER key on the Go back selection found in each
folder.
About Windows Media Player 11/Windows
Media Connect
06
Windows Media Player 11/Windows Media Connect is software to
deliver music, photos and movies from a Microsoft Windows XP
computer to home stereo systems and TVs. The same function is
also available in Windows Media Player 11.
With this software, you can play back files stored on the PC through
various devices wherever you like in your home.
If you come to a folder containing content that you wish to play, you
may press to display the Movie Options, Photo Options, or
Song Options as illustrated in pages 31, 33 and 34).
At this time you cannot download the Windows Media Connect
software from Microsoft’s website. If your server currently does not
have Windows Media Connect installed, install Windows Media
Player 11 (for Windows XP) instead. This software can be
downloaded from Microsoft’s website.
Pressing to display the browse menu (as illustrated in ,
pages 32, 33 and 35) will may a browse menu with the All Movies,
All Photos or All Songs options grayed out. If this is the case, this
means that this player has not finished compiling the list of available
media, and you may continue to browse through the folders and play
media while this list completes. When this player has finished
compiling this list, the All Movies, All Photos or All Songs options
will no longer be grayed out, and you will be able to select these and
continue navigating as described in this chapter:
For more information check the official Microsoft website.
Authorizing this player
In order to be able to browse and play files from a server this player
must be authorized or registered. This happens automatically when
the player makes a connection over the network to the server. If not,
please authorize or register this player manually on the server.
If you are not presented with a folders menu as described above, this
means that this player has finished compiling a list of available
media on your media servers, and you can navigate through the
Movie, Photo or Music Navigator screens as described in this
manual.
For more information on authorizing this player, refer to the
instruction manual of your server.
FAQ
Changing content on your Media Server
• Some files don’t show up. Where are they?
If you change the available content on your media server (by adding
or removing shared files) while you are in the Movie, Photo or Music
Navigators, the Movie, Photo or Music Navigator screen you are on
will change to the Folders menu. From here, you can browse the
folders and play content as described in the first section. Once this
player has finished compiling a new list of available media, the All
Movies, All Photos or All Songs options of the browse menu will
become highlighted an accessible.
– File names that don’t end with one of the permitted extensions
won’t be recognized by this player. See also File compatibility on
page 7.
– Supported file formats vary by server. As such, files not
supported by your server are not displayed on this unit.
For more information check with the manufacturer of your
server.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
07
Video/Audio Adjust menu
From the Video/Audio Adjust menu you can make various settings
that affect how video is presented on your TV and how the sounds.
Items in the Video/Audio Adjust menu can only be changed
during playback.
PureCinema mode can be automatically activated if you choose
Cinema from the Video Adjust menu, have the input line system set
to PAL (50 Hz), and have the output video resolution set to anything
other than 576i or 1080i.
If you notice problems with the images projected when set to Cinema
(images appear to motion-blurred, or jagged), set the Video Adjust to
Standard or Memory 1, Memory 2 or Memory 3.
Video Adjust
• Default setting: Standard
Creating your own presets
You can create up to three presets of your own.
From the Video Adjust screen you can select the Standard or
Cinema video presentation or define presets of your own in
Memory 1 to Memory 3.
1
2
Select one of the Memory presets.
Press to select ‘Detailed Settings’ then press ENTER.
1
Press HOME MENU and select ‘Video/Audio Adjust’ from
the on-screen display.
You can press VIDEO ADJUST on the remote to display the Video
Adjust screen.
Memory 1
Detailed Settings
Home Menu
3
Adjust the picture quality settings.
• Use the / buttons to select a setting.
• Use the / buttons to adjust the current setting.
Disc Navigator
Home Media Gallery
Video/Audio Adjust
Initial Setup
Memory 1
White Level
Black Level
Hue
Min
Min
Max
Max
Red
Max
Green
Min
2
3
Select ‘Video Adjust’.
Chroma Level
Use the / buttons to select a preset.
Select a setting then press ENTER to display just that setting. This
gives you more screen area in which to see the effects of changes
you make.
Standard
Detailed Settings
Memory 1
• Standard – Standard setting
1
Min
Max
White Level
• Cinema – Optimized for watching movies
• Memory 1/Memory 2/Memory 3 – Use for saving your own
presets (see Creating your own presets below)
• Press ENTER or RETURN to go back to full-screen display.
You can adjust any or all of the following picture quality settings:
4
Press ENTER or RETURN to make the setting and exit the
Video Adjust screen.
• White Level1 – Adjusts the intensity of white.
• Black Level1 – Adjusts the intensity of black.
PureCinema
There are two types of video signals: Video interlace material, with a
frame rate of 25 (PAL) or 30 frames/second; and film progressive
material, that has a frame rate of 24 or 25 (PAL) frames/second.
In PureCinema mode film progressive material is converted to 50 or 60
frames/second progressive , which matches more closely the picture
quality of a cinema screen. (24 frames/second source is converted to 60
frames/second.)
When you have Video Adjust set to Standard, Cinema, or Memory 1,
Memory 2 or Memory 3 and play a BD-ROM or DVD disc video that can
be identified as film progressive or video interlace material, PureCinema
mode is automatically activated.
• Hue1 – Adjusts the overall colour balance between red and
green.
• Chroma Level1 – Adjusts how saturated colours appear.
4
Press RETURN to save the preset and exit the Detailed
Settings screen.
Additionally, certain PAL movie discs (25 frames/second BD-ROM or
DVD discs) that contain film progressive material cannot be recognized
as such by this unit. In such instances, if you choose Cinema from the
Video Adjust menu, PureCinema mode is activated.
37
En
Note
1 Effective only for video output from HDMI OUT or COMPONENT VIDEO OUT connections (settings do no affect video output from VIDEO OUT or S-VIDEO OUT).
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Adjust
07
From the Audio Adjust menu you can set the Audio DRC (Dynamic
Range control).
Audio DRC
• Default setting: Off
When watching Dolby Digital BD and DVD discs, as well as PC files
with Dolby Digital audio, at low volume, it’s easy to lose the quieter
sounds completely — including some of the dialog. Switching
Audio DRC to On can help by bringing up the quieter sounds, while
controlling loud peaks.
How much of a difference you hear depends on the material you’re
listening to. If the material doesn’t have wide variations in volume,
you may not notice much change.
Important
• Audio DRC is effective with the following types of audio:
– Analog audio from the AUDIO OUT (2ch) and
AUDIO OUT (5.1ch) jacks.
– PCM audio from the DIGITAL AUDIO OUT (COAXIAL/
OPTICAL) and HDMI OUT jacks (see also About the audio
output settings on page 42).
1
Press HOME MENU and select ‘Video/Audio Adjust’ from
the on-screen display.
Home Menu
Disc Navigator
Home Media Gallery
Video/Audio Adjust
Initial Setup
2
Select ‘Audio Adjust’.
Video/Audio Adjust
Video Adjust
Audio Adjust
3
Highlight Audio DRC, then use the / buttons to change
to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as required.
Audio Adjust
Audio DRC
Max
Off
4
Press ENTER or RETURN to make the setting and exit the
Audio Adjust screen.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
CIhnapitteira8 l Setup menu
08
Using the Initial Setup menu
The Initial Setup menu is where you can set various player options for sound, picture, language and so on. Note that settings can only be
changed when the player is stopped.
If you disconnect the player from the wall outlet before switching the player off, any new settings made during that session will be lost.
•
Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •
Setting
Options
Explanation
Video Out
TV Aspect Ratio
4:3 (Standard)
Select if you have a standard 4:3 TV. See Changing the output video resolution.
When the output video resolution is set to 720p, 1080i or 1080p, video is output in 16:9
widescreen format even if TV Aspect Ratio is set to 4:3 (Standard). When connected to a 4:3
TV, set the output video resolution to 576i/480i or 576p/480p. See also Changing the output
video resolution on page 12.
16:9 (Widescreen) •
Full
Select if you have a widescreen 16:9 TV.
4:3 Video Out
4:3 video material is output without black bars on either side of the picture if the
TV Aspect Ratio (above) is set to 16:9 (Widescreen).
Normal •
4:3 video material is output with black bars on either side of the picture if the TV Aspect Ratio
setting (above) is set to 16:9 (Widescreen).
DVD 16:9 Video Out
Letter Box •
Pan & Scan
If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer
letterbox presentation of 16:9 format DVDs.
If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer
Pan & Scan presentation of 16:9 format DVDs.
Some discs contain only Letter Box or Pan & Scan presentation so the video output will depend on the disc.
HDMI Color Space
YCbCr •
This is the standard setting for HDMI-compatible devices.
RGB (16-235)
Use this setting if colours appear overly rich and the black too deep on the RGB (0-255)
setting.
RGB (0-255)
Use if colours are weak and black appears to ‘float’ on the RGB (16-235) setting.
When using an HDMI monitor that accepts only RGB input, this player outputs RGB video even if this setting is set to YCbCr. If the monitor is DVI-compatible, the player
outputs RGB (0-255) colour space. If however the picture looks unnatural, set it to RGB (16-235).
24p Direct Out
On
Gives smooth movement in BD film material video. This setting is only effective when the
player is connected to a 1080/24p-compatible TV using HDMI.
Off •
Choose this setting if you notice picture disturbance when the video switches between video
and film material.
When 24p Direct Out is On, you may experience some picture disturbance when the video switches between video and film material. See also Changing the output video
resolution on page 12.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Options
Explanation
08
Audio Out
Dolby Digital Out
Dolby Digital •
Outputs a Dolby Digital signal when a Dolby Digital source is being played.
Dolby Digital PCM Converts Dolby Digital sources to Linear PCM output. Use if your connected equipment
doesn’t support Dolby Digital audio.
This setting is effective in digital audio outputs.
DTS Out
DTS •
Outputs a DTS signal when a DTS source is being played.
DTS PCM
Converts sources with DTS audio to Linear PCM output. Use if your connected equipment
doesn’t support DTS audio.
This setting is effective in digital audio outputs.
DTS Downmix
Stereo •
If you’ve selected DTS PCM in DTS Out above, you can choose the way the DTS signal is
downmixed PCM audio. Stereo downmixes the signal to 2-channel stereo.
Lt/Rt
Downmixes to a 2-channel signal compatible with Dolby surround matrix decoders. (This
allows you to hear surround sound if your AV receiver or amplifier has Dolby Pro Logic
capability.)
HDMI Audio Out
Auto •
PCM
Outputs a bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD High
Resolution Audio or DTS. However, if the player is connected to an HDMI device that is
incompatible with the output of Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution
Audio, it outputs the Dolby Digital or DTS bitstream. Depending on the HDMI device
connected and the content being played, Linear PCM audio may be output. See About the
audio output settings on page 42 for details.
All audio signals are converted to Linear PCM. This player can output up to 7.1 ch Linear PCM
if the connected HDMI devices are capable of the output of Dolby TrueHD, Dolby Digital Plus
or DTS-HD High Resolution Audio. See About the audio output settings on page 42 for details.
Language
OSD Language
English •
Sets the language of the on-screen displays to English.
available languages
English •
Choose from the languages displayed for the on-screen displays.
Sets both the BD-ROM and DVD-Video default audio language to English.
Audio Language
available languages
Choose from the languages displayed to set the default audio language for BD-ROM and
DVD-Video playback.
Other
Continue to the next screen to set the default audio language for BD-ROM and DVD-Video
disc playback. You can select the language name or enter the code number (see on page 47
for the code list).
Discs do not necessarily have audio in your selected language. Also, some discs override the Audio Language preference.
Subtitle Language
English •
Sets the default subtitle language for BD-ROM and DVD-Video playback to English.
available languages
Choose from the languages displayed to set the default subtitle language for BD-ROM and
DVD-Video playback.
Other
Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video
disc playback. You can select the language name or enter the code number (see on page 47
for the code list).
Discs do not necessarily have subtitles in your selected language. Also, some discs override the Subtitle Language preference.
BD/DVD Menu
Language
w/Subtitle
Sets the language of BD-ROM and DVD-Video menus to the same as that set for the subtitle
language.
Language
•
available languages
Choose from the displayed languages to set the default language for BD-ROM and DVD-Video
menus.
Other
Continue to the next screen to set the default menu language for BD-ROM and DVD-Video
disc menus. You can select the language name or enter the code number (see on page 47 for
the code list).
Discs do not necessarily have menus in your selected menu language.
Subtitle Display
On •
Off
Select to have BD-ROM and DVD-Video discs display subtitles.
Select to switch off subtitle display.
Some discs may override these settings.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Options
Explanation
08
Parental Lock
Change Password
(Set Password)
Next Screen
Set or change the password necessary to play BD or DVD discs that have level/age
restrictions. In order to change the password, you’ll need to first enter your existing one.
DVD Parental Lock
Change Level
Enter your password and then set the parental lock level. Discs with a lock level higher than
that set in the player will require the password to play.
DVD Country Code
Enter your password and then set a country/area code. This ensures that you see the scenes
intended for your country or area. See BD/DVD country/area code list on page 47.
BD Parental Lock
Change Age
Restriction
Enter your password and then set the age restriction. “255” indicates no parental control.
BD Country Code
Enter your password and then set a country/area code. This ensures that you see the scenes
intended for your country or area. See BD/DVD country/area code list on page 47.
Only certain discs have parental lock features. Check the disc packaging to see what features the disc has. If you forget your password you can reset it by resetting the player
to its factory settings. See BD/DVD language code list on page 47.
Network
IP Configuration
Next Screen
Next Screen
Next Screen
Continue to the next screen to input IP address details. See Setting up for network use on
page 19 for more detailed information.
Device Name
Continue to the next screen to set the name of this player as it will appear to other devices on
the network. See Setting up for network use on page 19 for more detailed information.
Display Network
Config.
Continue to the next screen to see a summary of your network settings.
Speakers
Audio Output Mode
2 Channel •
5.1 Channel
Set if you connected this player to an amplifier using only the front left/right channels of the
AUDIO OUT (5.1ch) outputs.
Set if you connected this player to an amplifier using all 5.1 channels of the
AUDIO OUT (5.1ch) outputs. On this setting the audio output from the AUDIO OUT (2ch)
jacks will be incorrect.
Speaker Setup
Next Screen
Continue to the next screen to specify which speakers are connected to your system.
This setting affects how audio is output from the multi-channel analog outputs. See Speaker
Setup on page 43 for more detailed information.
Options
On Screen Display
On •
Off
The player displays operation displays (“Stop”, “Play”, etc.) on-screen.
Switches off the on-screen operation displays.
Auto Power Off
On •
If the player is stopped or paused for more than 30 minutes with no operation by the user, the
player automatically switches itself off.
Off
No automatic power off.
Setup Navigator
HDMI Control
Start
On •
Off
Select to start the Setup Navigator. See also Switching on and setting up on page 18.
Select when using the HDMI Control function. See HDMI Control on page 5.
Select when not using the HDMI Control function. See HDMI Control on page 5.
Playback the BD portion.
Set hybrid disc
playback layer
BD •
DVD
CD
Playback the DVD portion. When no DVD portion is present, the BD portion is played back.
Playback the CD portion. When no CD portion is present, the BD portion is played back.
This setting cannot be changed when a disc is inserted in the disc tray.
Software Update
Start
The Software Update function can check for and download updated system software from the
network server. See Software updating on page 43.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
About the audio output settings
08
The table below shows how the audio settings you make in the Initial Setup menu (page 39) affect the output to the analog (2ch/5.1ch), digital
and HDMI outputs with various types of disc/files.
HDMI output1
PCM6
Analog outputs
2ch2
Digital outputs
PCM convert3
Disc audio format
Dolby Digital
Bitstream4,5
5.1ch2
Auto5,6,7
2ch downmix
PCM
5.1ch PCM
2ch downmix
PCM
Dolby Digital
5.1ch PCM
Dolby Digital
Dolby Digital
plus8
2ch downmix
PCM
5.1ch PCM
2ch downmix
PCM
Dolby Digital
7.1ch PCM9
Dolby Digital
Plus
Dolby TrueHD8
2ch downmix
PCM
5.1ch PCM
5.1ch PCM
2ch downmix
PCM
Dolby Digital
DTS
7.1ch
Dolby TrueHD14
PCM9,10,11,12,13
DTS
2ch downmix
PCM
2ch downmix
PCM
5.1ch
PCM10,15,16
DTS
BD-ROM
DTS-HD High
Resolution
2ch downmix
PCM
5.1ch PCM
5.1ch PCM
2ch downmix
PCM
DTS
DTS
7.1ch
DTS-HD High
Resolution Audio
PCM9,10,12,15
Audio17
DTS-HD Master 2ch downmix
Audio18
2ch downmix
PCM
5.1ch
PCM10,15,16
DTS
PCM
Linear PCM
2ch downmix
PCM
5.1ch downmix 2ch downmix
2ch downmix
PCM
7.1ch
7.1ch PCM
PCM10,11,15
PCM11
PCM
Dolby Digital
DTS
2ch downmix
PCM
5.1ch PCM
2ch downmix
PCM
Dolby Digital
5.1ch PCM
Dolby Digital
DTS
2ch downmix
PCM
5.1ch PCM
2ch downmix
PCM
DTS
5.1ch PCM
DVD-Video
MPEG
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
Linear PCM
1. If the connected HDMI device is compatible with fewer channels of Linear PCM audio than this player, the output will be adjusted to be compatible with the HDMI device.
2. When Audio Output Mode is set to 2 Channel or 5.1 Channel (see Audio Output Mode on page 41).
3. Dolby Digital PCM or DTS PCM setting (see Dolby Digital Out and DTS Out on page 40).
4. Dolby Digital or DTS setting (see Dolby Digital Out and DTS Out on page 40).
5. Even if there is interactive audio, interactive audio is not mixed.
6. When HDMI Audio Out is set to PCM or Auto (see HDMI Audio Out on page 40).
7. If the connected HDMI device is not compatible with Dolby Digital Plus, Dolby TrueHD or DTS-HD High Resolution Audio, the signal will be output as Dolby Digital or DTS.
If the HDMI device is not compatible with Dolby Digital or DTS, the signal is output as Linear PCM. If Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution Audio is
converted and output as Linear PCM, the output signal is Linear PCM of each source signal.
8. AUDIO OUT (2ch), AUDIO OUT (5.1ch) and DIGITAL AUDIO OUT (COAXIAL/OPTICAL) output Dolby Digital.
9. Audio is output in 7.1ch/6.1ch with Surround Back output sources only. With other sources, audio is output in 5.1ch. The 6.1 Surround Back audio is output in 7.1ch.
10.Interactive audio is not mixed when the sampling rate is 192 kHz or 96 kHz.
11.Outputs 2ch downmix PCM when the sampling rate is 192 kHz.
12.Outputs max. 5.1ch audio when the disc contains 96 kHz audio and the resolution is set to 720p, 1080i or 1080p.
13.Outputs 2ch audio when the disc contains 96 kHz audio and the resolution is set to 576i/480i or 576p/480p.
14.Outputs a Dolby Digital bitstream when the resolution is set to 576i/480i or 576p/480p.
15.Outputs 48 kHz audio when the disc contains 96 kHz audio and the resolution is set to 576i/480i or 576p/480p.
16.Outputs 7.1ch audio when the source is the DTS-ES 6.1 Discrete audio.
17.AUDIO OUT (2ch), AUDIO OUT (5.1ch) and DIGITAL AUDIO OUT (COAXIAL/OPTICAL) output DTS.
18.DTS sound is output.
Note
• Output sampling rate is 48 kHz through the digital audio outputs.
• MPEG audio is always output as linear PCM.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Setup
08
Note
• Steps 1 to 3 are the operations performed by the user (they are
intended to download the software from the Internet).
You only need to make this setting if you connected this player to your
amplifier using the 5.1 channel analog outputs.
• Steps 4 to 6 are the operations performed (automatically) by the
player (they are intended to update the software).
This setting does not affect any digital audio output.
Use the Speaker Setup screen to tell the player what kinds of
1
2
3
Press HOME MENU and select ‘Initial Setup’.
Select ‘Options’, then ‘Software Update’.
Select ‘Start’, then ‘Yes’.
speakers you have connected.
1
2
3
4
Press HOME MENU and select ‘Initial Setup’.
Select ‘Speakers’.
Select ‘Speaker Setup’, then ‘Next Screen’.
Use the / buttons to select a speaker.
Initial Setup
Video Out
Audio Out
Language
Parental Lock
Network
Software Update
Yes
No
Initial Setup
Spekaers
Options
Video Out
Audio Out
Language
Parental Lock
Network
Speaker Setup
C
Yes
Do not unplug the power cord during downloading.
The disc tray will open. Do not touch it. Wait awhile.
Start downloading?
Ls/Rs
L/R
Yes
Large
Spekaers
Options
• The player turns off automatically.
5
Use the / buttons to change the speaker setup.
• If the player is already running the latest software, a help
message will be displayed.
Specify which speakers you have in your setup:
• C (Center): Yes or No
• Depending on the Internet connection conditions, software
updating may take a certain period of time (certain time is also
required for downloading of software). Other operations are
defeated during software updating.
• Ls/Rs (Surround): Yes or No
• L/R (Main): Small or Large (This setting is only applicable if the
C and Ls/Rs speakers are present.)
4
Downloading and updating of the software start.
6
Press ENTER to save the settings and exit the Speaker Setup
The front panel display shows the following messages, and the
player produces an operating sound (it does not output audio or
video).
screen.
Software updating
“POWER OFF”
The software of the player can be updated by connecting it to the
Internet using a LAN cable.
“POWER ON”
“NET”
Important
“NET-DWLD”
• Depending on the Internet connection conditions, software
updating may take a certain period of time (certain time is also
required for downloading of software). Other operations are
defeated during software updating.
“DOWNLOAD”
5
6
Updating starts.
• As the disc tray opens automatically when software updating
starts, it is recommended to open the rack door if the player is
installed in a rack with front doors. When the disc tray is open,
never attempt to push close it by force (leave the disc tray open).
• The front panel display shows messages such as
“DATA CHECK”, “WRT FLASH1”, “WRT DRIVE” and “WRT
SUBCON”.
• Do not unplug the power cord during software updating.
• Do not unplug the power cord during software updating.
Otherwise, the updating will be aborted and malfunction may
occur with the player.
The disc tray opens automatically when updating
completes.
• The front panel display shows “DL OK” and the player turns off
automatically.
• When the disc tray is open, never attempt to push close it by
force (leave the disc tray open).
7
Verify that the software is updated properly.
• Step 7 is the operation performed by the user.
• Turn the player on. If the front panel display shows “DL OK”, the
software has been updated successfully.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
09
Additional information
Taking care of your player and discs
Damaged and odd-shaped discs
Discs spin at high speed inside the player. If you can see that a disc
is cracked, chipped, warped, or otherwise damaged, don’t risk using
it in your player — you could end up damaging it.
Handling discs
When holding discs of any type, take care not to leave fingerprints,
dirt or scratches on the disc surface. Hold the disc by its edge or by
the center hole and edge.
Damaged or dirty discs can affect playback performance. Take care
also not to scratch the label side of the disc. Although not as fragile
as the recorded side, scratches can still result in a disc becoming
unusable.
Should a disc become marked with fingerprints, dust, etc., clean
using a soft, dry cloth, wiping the disc lightly from the center to the
outside edge as shown in the diagram below.
This player is designed for use with conventional, fully circular discs
only. Use of shaped discs is not recommended for this product.
Pioneer disclaims all liability arising in connection with the use of
shaped discs.
Do not use any kind of adapter when playing 8 cm DVD discs. This
size disc can be played in this player without an adapter; just use the
smaller disc guide in the disc tray.
Cleaning the pickup lens
Wipe lightly from the center of the disc using straight strokes.
Don’t wipe the disc surface using circular strokes.
The player’s lens should not become dirty in normal use, but if for
some reason it should malfunction due to dust or dirt, consult your
nearest Pioneer-authorized service center. Although lens cleaners
for DVD players are commercially available, we advise against using
them since some may damage the lens.
Problems with condensation
If necessary, use a cloth soaked in alcohol, or a commercially
available DVD/BD cleaning kit to clean a disc more thoroughly.
Never use benzine, thinner or other cleaning agents, including
products designed for cleaning vinyl records.
Condensation may form inside the player if it is brought into a warm
room from outside, or if the temperature of the room rises quickly.
Although the condensation won’t damage the player, it may
temporarily impair its performance. For this reason you should leave
it to adjust to the warmer temperature for about an hour before
switching on and using.
Storing discs
Although BD and DVD discs are more durable than vinyl records,
you should still take care to handle and store discs correctly. When
you’re not using a disc, return it to its case and store upright. Avoid
leaving discs in excessively cold, humid, or hot environments
(including under direct sunlight).
Don’t glue paper or put stickers onto the disc, or use a pencil,
ball-point pen or other sharp-tipped writing instrument. These could
all damage the disc.
For more detailed care information see the instructions that come
with discs.
Do not load more than one disc into the player at a time.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints on installation
Screen sizes and disc formats
09
We want you to enjoy using this product for years to come, so please
bear in mind the following points when choosing a suitable location
for it:
BD-ROM and DVD-Video discs come in several different screen
aspect ratios, ranging from TV programmes, which are generally 4:3,
to CinemaScope widescreen movies, with an aspect ratio of up to
about 7:3.
Do...
• Use in a well-ventilated room.
Televisions, too, come in different aspect ratios; ‘standard’ 4:3 and
‘widescreen’ 16:9.
• Place on a solid, flat, level surface, such as a table, shelf or
stereo rack.
Widescreen TV users
If you have a widescreen TV, the TV Aspect Ratio setting (page 39)
of this player should be set to 16:9 (Widescreen).
Don’t...
• Use in a place exposed to high temperatures or humidity,
including near radiators and other heat-generating appliances.
When you watch discs recorded in 4:3 format, you can use the TV
controls to select how the picture is presented. Your TV may offer
various zoom and stretch options; see the instructions that came
with your TV for details.
• Place on a window sill or other place where the player will be
exposed to direct sunlight.
• Use in an excessively dusty or damp environment.
• Place directly on top of an amplifier, or other component in your
stereo system that becomes hot in use.
Please note that some movie aspect ratios are wider than 16:9, so
even though you have a widescreen TV, these discs will still play in
a ‘letter box’ style with black bars at the top and bottom of the
screen.
• Place the player on top of or immediately next to the television or
monitor as you may experience interference.
• Use in a kitchen or other room where the player may be exposed
to smoke or steam.
Standard TV users
If you have a standard TV, the TV Aspect Ratio setting (page 39) of
this player should be set to 4:3 (Standard).
• Use on a thick rug or carpet, or cover with cloth — this may
prevent proper cooling of the unit.
• Place on an unstable surface, or one that is not large enough to
support all four of the unit’s feet.
Resetting the player
Use this procedure to reset all the player’s settings to the factory
default.
Moving the player
If you need to move this unit, first remove the disc, if there’s one
loaded, and close the disc tray. Next, press STANDBY/ON to
switch the power to standby, checking that the power off indication
in the display goes off. Wait at least 10 seconds. Lastly, disconnect
the power cord.
1
2
3
Make sure that the player is turned on.
Press to stop playback when a disc is being played back.
Press and hold and press STANDBY/ON.
• Use the control buttons on the front panel.
Never lift or move the unit during playback — discs rotate at a high
speed and may be damaged.
• The player turns off with all settings reset.
Caution for when the unit is installed in a rack with a
glass door
Do not press the OPEN/CLOSE button on the remote control to
open the disc table while the glass door is closed. The door will
hamper movement of the disc table, and the disc table could be
damaged.
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the remote to control your TV
09
1
Input the manufacturer code.
2
Confirm that the TV is responding to the programmed
While holding down the TV CONTROL button, input the two digit
code from the table below that corresponds to the make of your TV.
code.
On the remote, press the TV CONTROL button. If the TV switches
on (or into standby if it was on previously), then you have the correct
code.
For example, if you have a Pioneer TV, press and hold TV CONTROL ,
then press 0, 0 on the remote control.
If nothing happens when you press the TV CONTROL button,
start again from step 1 using a different code. Some manufacturers
have several codes. Try each one until you find the one that works.
TV Preset code list
Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for
the manufacturer in the list will not work for the model that you are using.
Manufacturer Code(s)
ACURA 44
ADMIRAL 31
AIWA 60
AKAI 32, 35, 42
AKURA 41
ALBA 07, 39, 41, 44
AMSTRAD 42, 44, 47
ANITECH 44
FRONTECH 31, 42, 46
FRONTECH/PROTECH 32
FUJITSU 48
FUNAI 40, 46, 58
GBC 32, 42
GE 00, 01, 08, 07, 10, 11, 17, 02, 28, 18
GEC 07, 34, 48
GELOSO 32, 44
MAGNAVOX 07, 10, 03, 12, 29
MANESTH 39, 46
MARANTZ 07
SALORA 31, 32, 42, 43
SAMBERS 49
SAMSUNG 07, 38, 44, 46, 69, 70
SANYO 35, 45, 48, 21, 14, 91
SBR 07, 34
SCHAUB LORENZ 42
SCHNEIDER 07, 41, 47
SEG 42, 46
MARK 07
MATSUI 07, 39, 40, 42, 44, 47, 48
MCMICHAEL 34
MEDIATOR 07
MEMOREX 44
ASA 45
GENERAL 29
METZ 31
SEI 32, 40, 49
ASUKA 41
GENEXXA 31, 41
GOLDSTAR 10, 23, 21, 02, 07, 50
GOODMANS 07, 39, 47, 48, 56
GORENJE 38
GPM 41
GRAETZ 31, 42
MINERVA 31, 53
MITSUBISHI 09, 10, 02, 21, 31
MULTITECH 44, 49
NEC 59
NECKERMANN 31, 07
NEI 07, 42
SELECO 31, 42
SHARP 02, 19, 27, 67, 90
SIAREM 32, 49
SIEMENS 31
SINUDYNE 32, 39, 40, 49
SKANTIC 43
AUDIOGONIC 07, 36
BASIC LINE 41, 44
BAUR 31, 07, 42
BEKO 38
BEON 07
BLAUPUNKT 31
BLUE SKY 41
BLUE STAR 18
BPL 18
BRANDT 36
BTC 41
BUSH 07, 41, 42, 44, 47, 56
CASCADE 44
CATHAY 07
GRANADA 07, 35, 42, 43, 48
GRADIENTE 30, 57
GRANDIN 18
GRUNDIG 31, 53
HANSEATIC 07, 42
HCM 18, 44
HINARI 07, 41, 44
HISAWA 18
HITACHI 31, 33, 34, 36, 42, 43, 54, 06, 10, OSUME 48
NIKKAI 05, 07, 41, 46, 48
NOBLIKO 49
SOLAVOX 31
SONOKO 07, 44
SONOLOR 31, 35
SONTEC 07
NOKIA 32, 42, 52
NORDMENDE 32, 36, 51, 52
OCEANIC 31, 32, 42
ORION 32, 07, 39, 40
OSAKI 41, 46, 48
OSO 41
SONY 04
SOUNDWAVE 07
STANDARD 41, 44
STERN 31
SUSUMU 41
CENTURION 07
CGB 42
CIMLINE 44
CLARIVOX 07
CLATRONIC 38
CONDOR 38
24, 25, 18
HUANYU 56
HYPSON 07, 18, 46
ICE 46, 47
IMPERIAL 38, 42
INDIANA 07
OTTO VERSAND 31, 32, 07, 42
PALLADIUM 38
PANAMA 46
PANASONIC 31, 07, 08, 42, 22
PATHO CINEMA 42
PAUSA 44
SYSLINE 07
TANDY 31, 41, 48
TASHIKO 34
TATUNG 07, 48
TEC 42
TELEAVIA 36
CONTEC 44
CROSLEY 32
INGELEN 31
PHILCO 32, 42
PHILIPS 31, 07, 34, 56, 68
PHOENIX 32
PHONOLA 07
PROFEX 42, 44
PROTECH 07, 42, 44, 46, 49
QUELLE 31, 32, 07, 42, 45, 53
R-LINE 07
TELEFUNKEN 36, 37, 52
TELETECH 44
TENSAI 40, 41
THOMSON 36, 51, 52, 63
THORN 31, 07, 42, 45, 48
TOMASHI 18
TOSHIBA 05, 02, 26, 21, 53
TOWADA 42
INTERFUNK 31, 32, 07, 42
INTERVISION 46, 49
ISUKAI 41
ITC 42
ITT 31, 32, 42
CROWN 38, 44
CRYSTAL 42
CYBERTRON 41
DAEWOO 07, 44, 56
DAINICHI 41
DANSAI 07
JEC 05
JVC 13, 23
DAYTON 44
DECCA 07, 48
DIXI 07, 44
DUMONT 53
ELIN 07
ELITE 41
KAISUI 18, 41, 44
KAPSCH 31
KENDO 42
KENNEDY 32, 42
KORPEL 07
KOYODA 44
RADIOLA 07
RADIOSHACK 10, 23, 21, 02
RBM 53
RCA 01, 10, 15, 16, 17, 18, 61, 62, 09
REDIFFUSION 32, 42
REX 31, 46
ULTRAVOX 32, 42, 49
UNIDEN 92
UNIVERSUM 31, 07, 38, 42, 45, 46, 54
VESTEL 07
VICTOR 13
VOXSON 31
ELTA 44
EMERSON 42
ERRES 07
FERGUSON 07, 36, 51
FINLANDIA 35, 43, 54
FINLUX 32, 07, 45, 48, 53, 54
FIRSTLINE 40, 44
FISHER 32, 35, 38, 45
FORMENTI 32, 07, 42
LEYCO 07, 40, 46, 48
LIESENK&TTER 07
LOEWE 07
LUXOR 32, 42, 43
M-ELECTRONIC 31, 44, 45, 54, 56, 07, 36,
51
ROADSTAR 41, 44, 46
SABA 31, 36, 42, 51
SAISHO 39, 44, 46
WALTHAM 43
WATSON 07
WATT RADIO 32, 42, 49
WHITE WESTINGHOUSE 07
YOKO 07, 42, 46
ZENITH 03, 20
MAGNADYNE 32, 49
MAGNAFON 49
PIONEER 00, 31, 32, 07, 36, 42, 51
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
BD/DVD language code list
09
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Dutch (nl), 1412
Russian (ru), 1821
Chinese (zh), 2608
Korean (ko), 1115
Greek (el), 0512
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Welsh (cy), 0325
Danish (da), 0401
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Kirghiz (ky), 1125
Burmese (my), 1325
Nauru (na), 1401
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Portuguese (pt), 1620
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swedish (sv), 1922
Swahili (sw), 1923
Tamil (ta), 2001
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Latin (la), 1201
Lingala (ln), 1214
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Somali (so), 1915
Albanian (sq), 1917
Maltese (mt), 1320
BD/DVD country/area code list
Country/Area, Country/Area code, Country/Area code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Malaysia, 1325, my
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Singapore, 1907, sg
Spain, 0519, es
Switzerland, 0308, ch
Sweden, 1905, se
Taiwan, 2023, tw
Canada, 0301, ca
Chile, 0312, cl
China, 0314, cn
Indonesia, 0904, id
Italy, 0920, it
Japan, 1016, jp
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Thailand, 2008, th
United Kingdom, 0702, gb
United States of America, 2119, us
Denmark, 0411, dk
Republic of Korea, 1118, kr
Russian Federation, 1821, ru
Troubleshooting
Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this component, please check
the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being
used. If the trouble cannot be rectified even after checking the points below, ask your nearest Pioneer authorized service center or your
dealer to carry out repair work.
Playback troubleshooting
Problem
Remedy
The disc won’t play or is automatically
ejected after loading.
• Make sure the disc is free from dirt and dust and is not damaged (see Taking care of your player and
discs on page 44).
• Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.
• Incompatible region: If the region on a BD-ROM or DVD-Video disc does not match the region on the
player, the disc cannot be used (see BD-ROM regions and DVD-Video regions on page 8).
• Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player
near an air-conditioning unit.
• Make sure the disc is compatible with this player (see Disc/content format playback compatibility on
page 7).
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Remedy
09
Picture freezes and the front panel and
remote control buttons stop working.
• Press (stop), then start playback again ( (play)).
• Press the front panel STANDBY/ON button to switch the power off, then switch back on and
restart playback. If the power fails to switch off, press and hold STANDBY/ON for 20 seconds
until the power switches off. Then switch on again by pressing STANDBY/ON.
• Unplug from the wall socket, then plug back in and switch on again by pressing STANDBY/ON to
switch the player on.
No picture/No colour.
• Incorrect video connections: Check that connections are correct and that plugs are inserted fully.
Also check the video cable for damage.
• TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected
equipment.
• Depending on your display, some of the settings may result in the picture disappearing. In this case,
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video
resolution on page 12).
• Some BD-ROM discs output video only over HDMI.
The video output is set to 720p/1080i/
1080p, but the actual output is 576i/480i or
576p/480p.
• For copy-protection purposes, DVD-Video and some BD-ROM discs output 576i/480i or 576p/480p
over the component output.
Screen is stretched or aspect does not
change.
• The TV Aspect Ratio or 4:3 Video Out setting in the Initial Setup menu is incorrect. See
TV Aspect Ratio and 4:3 Video Out on page 39 for how to set these correctly for your TV/monitor.
• When output video resolution is set to 720p, 1080i or 1080p, video is output in 16:9 Widescreen
format even if TV Aspect Ratio is set to 4:3 (Standard).
Picture disturbance during playback or
dark image.
• This player is compatible with Macrovision System copy guard. Some discs include a copy
prevention signal, and when this type of disc is played back, stripes etc., may appear on some
sections of the picture depending on the TV. This is not a malfunction.
• Due to the player’s copy protection circuits, connection of this device through a VCR or an AV
selector may cause picture problems. This is not a malfunction.
No audio, or audio is distorted.
• No audio is output during slow motion playback or when scanning contents.
• Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).
• Check that the disc is free from dust and dirt, and that it is not damaged (Taking care of your player
and discs on page 44).
• Check that all interconnects are firmly inserted.
• Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the
cable for damage.
• Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.
• Check the Audio Output Mode on page 41. If this is set to 5.1 Channel, output from the AUDIO
OUT (2ch) jacks will be incorrect.
• Check the Speaker Setup on page 43.
• For copy-protection purposes, some BD-ROM discs only output audio over optical/coaxial and
HDMI.
• When Audio CDs containing text files or such data are played back, sound is muted.
The analog audio is OK, but there appears • Check that the Dolby Digital Out and DTS Out settings (page 40) are suitable for your amplifier/
to be no optical/coaxial digital audio
signal.
receiver — check the instruction manual that came with your amplifier/receiver (also check that the
output settings on your amplifier/receiver are correct).
Cannot play multi-channel audio.
• Check the audio options available from the disc menu.
• Multi-channel 192 kHz audio is output in 2 channels.
• Check that the Dolby Digital Out and DTS Out settings (page 40) are suitable for your amplifier/
receiver — check the instruction manual that came with your amplifier/receiver.
• If you connected this player to your amplifier/receiver using the 5.1 channel analog outputs, make
sure the Audio Output Mode (page 41) and Speaker Setup (page 43) are set correctly.
• If you connected this player to your amplifier/receiver using HDMI, or the optical/coaxial digital
outputs, make sure that the output settings on your amplifier/receiver are correct (refer to the
instruction manual that came with your amplifier/receiver).
• To use the 7.1ch setting for Dolby Digital Out, set Dolby Digital PCM (page 40).
Noise is output when DTS audio is played. • If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable,
set DTS Out to DTS PCM (page 40). If you do not do this, noise will be output when you play a
DTS disc.
Cannot output 96 kHz or 192 kHz digital
audio from optical/coaxial digital output.
• The player does not output digital audio from the optical/coaxial jacks at this sampling rate. The
digital output is automatically downsampled.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Remedy
09
Disc containing PC files won’t play.
• Make sure the disc is compatible with this player (see Disc/content format playback compatibility on
page 7).
• This player is compatible with multi-border discs, but only plays the first border.
• Check that the file complies to one of the supported formats, bit rates or profiles (see File
compatibility on page 7). Also check that the file is not damaged.
• If the message ‘Cannot play this format’ is displayed when you try to play PC files, check the file
formats.
• This player cannot play DRM-protected content on DVD and DRM-protected titles appear in the Disc
Navigator with a lock icon ( ).
No picture or High Definition video output • For copy-protection purposes, composite, S-Video and component video output may not possible.
when watching a BD. See Connecting for HDMI output on page 11 to connect using HDMI.
Image is blurred when you begin playback • Certain televisions cause blur effects when playback of a disc begins. This is not a malfunction.
of a disc.
Colours are not displayed properly on the • When you have used the included video cables to connect this unit to a TV that does not support
TV.
either NTSC or PAL, some colours may not display correctly. For more information please refer to the
operating instructions of your TV, and confirm the TV system settings of this unit.
Tracks/files are repeated during random
play.
• Because tracks/files are selected entirely at random, same tracks/files may be played in quick
succession. For example, ‘Track 1’ may be followed by ‘Track 5,’ only to have ‘Track 1’ play again next.
This is not a malfunction.
SlideShows do not play.
• If you have selected a single file and select Slideshow from the Photo Options menu, then only
that single file is played back. To play a slideshow you must select All Photos from the browse
menu.
Images no longer displayed when you
change the 24p Direct Out setting to On.
• Depending on your display, some of the settings may result in the picture disappearing. In this case,
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video
resolution on page 12).
CDs cannot be copied on other external
components.
• The audio signals of a CD output at the jacks of this player are protected from copying and cannot
be copied on other external components.
• To copy the audio signals recorded on a CD, connect your external components to the AUDIO OUT
(2ch) jacks of this player.
Video is distorted during playback of a
movie file on a DVD-R/-RW disc or media
servers.
• Verify that the TV system frame rate (50 Hz/60 Hz) is set properly. The TV system can be switched
over using the Blue button (see About NTSC/PAL TV systems on page 20).
HDMI troubleshooting
Problem
Remedy
No HDMI video output. (A connected
HDMI component doesn’t work with this
player.)
• This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface).
Depending on the component you have connected, unreliable signal transfers may result.
• If you connect a DVI device to the HDMI output of this player, ensure that it is compliant with
High-bandwidth Digital Content Protection (HDCP).
• If the front panel HDMI indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the settings for the component
you’re using. You may need to refer to the instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable isn’t damaged.
• If the front panel HDMI indicator is lit:
– Depending on your display, some of the settings may result in the picture disappearing. In this case,
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video
resolution on page 12).
• Depending on the HDMI cable being used, 1080p output may not appear correctly (The
supplied HDMI cable is capable of outputting 1080p video).
Colours are too rich or too weak, or black • Use a different HDMI Color Space setting (page 39).
is too deep or appears to ‘float’.
No HDMI audio output.
• If you have connected to an HDCP-compatible DVI component, there won’t be any audio output
from the HDMI terminal. Connect using the optical/coaxial digital outputs (or the analog outputs).
• Verify that the connected HDMI device is compatible with Dolby TrueHD or Dolby Digital Plus (i.e. if
bitstream output is allowed). If the HDMI device is not compatible, the audio will be converted into
D1olby Digital or Linear PCM.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Remedy
09
HDMI Control does not function.
• Verify that the HDMI cable is firmly connected.
• Make sure that this unit’s HDMI Control is set to On (page 41).
• Make sure that the HDMI Control for the connected components is set to On. For more information,
refer to the operating manual for the connected component.
• This function may not work properly if you have multiple components connected to a single plasma
television, AV system (amplifier or AV receiver etc.), or HD AV Converter. For more information refer
to the operating manual of your plasma television, AV system, or HD AV Converter.
• You can enable HDMI Control by turning the HDMI Control setting to On for all components
connected via HDMI cable. Check the video output from this unit once you have completed making
connections and settings for all components. You will need to check the video output each time you
change connected components or remove the HDMI cable.
• Check whether the connected component supports HDMI Control or not. For more information refer
to the operating manual of your plasma television, AV system (amplifier or AV receiver etc.), or HD
AV Converter.
• Certain functions are not supported on some plasma televisions.
• This player does not support HDMI Control-compatible components other than those made by
Pioneer.
• This unit will not function properly with components that do not support HDMI Control, or when
connected with components other than those made by Pioneer.
• If you want to use an HDMI cable other than the supplied HDMI cable, use the one that supports the
HDMI 1.3 specification (Category 2) or later. The HDMI Control functions may not operate properly
if you do not use an HDMI cable that supports the HDMI 1.3 specification (Category 2) or later.
Network troubleshooting
Problem
Remedy
Home Media Gallery is not available.
• LAN indicator is unlit:
– Check the physical connections (hub, 100BASE-TX, or other cable quality).
• LAN indicator is lit:
– If this player’s IP address is set automatically, make sure that the media server’s address is also set
automatically. If the IP address of the media server has been set manually, set the IP address of the
player manually too (see Network on page 41).
– Check the logical connections (IP address setup, DHCP, etc.). Confirm that the IP address is correct
if acquired using DHCP or Auto-IP in the Network Config. screen that follows the Initial Setup menu
(see page 41).
– Confirm that the media server is on and not in standby or sleep mode.
– Check the network and other settings on the media server.
– Check that this player and the media server are on the same Local Area Network (LAN).
– Check if the media server (Windows Media Player 11, Windows Media Connect or DLNA-compliant)
is running. Restart if necessary.
– Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if
one or more folders has become corrupted on the server.
– Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.
A connected media server does not show • Confirm that the media server is on and not in standby or sleep mode.
up in the source list in the Home Media
Gallery.
• Check the network and other settings on the media server.
• Check that this player and the media server are on the same Local Area Network (LAN).
• Check if the media server (Windows Media Player 11, Windows Media Connect or DLNA-compliant)
is running. Restart if necessary.
• Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if
one or more folders has become corrupted on the server.
• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.
• Check that there are playable files on the media server.
• After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.
A media server shows up in the source list • Check the media server setup. If a client is registered (authorized) manually, the setup procedure
but is not available (a lock icon (
appears).
)
may have to be run again.
• Check that there are playable files on the media server.
• After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.
Content different from last time appears
on the network (missing items, etc.).
• If the player cannot connect to the same server as last time (because it is switched off, for example),
the player will connect to another server on the network. To see content on a particular server, make
sure it is running and then select it as the source in the Home Media Gallery (see Movie sources on
page 32).
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Remedy
09
Cannot play or display.
• Check the physical connections (hub, 100BASE-TX, or other cable quality).
• Check if the file complies to the supported format, bit rate or profile (see File compatibility on
page 7). Also check if the file is damaged.
• If the message ‘Cannot play this format’ is displayed when you try to play PC files, check the file
formats.
• It takes time to capture and display a large-sized image; during this time you may have to wait to
operate the player.
• This player cannot play DRM-protected content stored on a DLNA server (not a Windows Media
Player 11 or Windows Media Connect server).
• Some files that comply with one of the supported formats may not play or be displayed.
• Check if there are too many files on the server.
• Check if the PC is operating properly. Reboot the PC after confirming its specification and setup.
Image or sound is interrupted or distorted • Check the physical connections (hub, 100BASE-TX, or other cable quality). It is strongly
(block noise appears).
recommended to use 100BASE-TX for playback quality and display speed.
• When connected by a wireless LAN, check if the bit rate is sufficient.
• Check that the file complies with the supported format, bit rate or profile (see File compatibility on
page 7). Also check if the file is damaged.
• Some files that comply with one of the supported formats may not play or be displayed.
• Check if the PC is operating properly. Reboot the PC after confirming its specification and setup.
Genre (movie), Playlist (music), Album
(photo) or folder configuration differs from
one server to another.
• The configuration may change depending on server type. This is not a malfunction.
An available server is selected but cannot • Check if the server is correctly set up for file sharing, if the target folder has been deleted, or if one or
be navigated.
more folders have been corrupted on the server.
• Check if there are too many files on the server.
‘Cannot connect to server.’ is displayed • The message is displayed when connection to the server failed. Verify that the network cable is
when network downloading is attempt.
connected properly before retrying.
“WRT FAILED” is displayed on the front
panel display during network downloading.
• The message is displayed when downloading failed. As the player may be failed, contact your local
Pioneer Customer Service Center.
Miscellaneous troubleshooting
Problem
Remedy
It is taking a long time for the unit to start • It can take up to one minute for the system to start up once you press the STANDBY/ON button.
up.
This does not mean that the player is experiencing problems.
The power automatically turns off.
• The Auto Power Off function switches the player into standby if no operation is performed for
30 minutes while the player is stopped or paused (page 41).
• This unit’s power may be turned off when you control this unit from a connected TV. If you do not
want this unit to be turned off in this way, set this unit’s HDMI Control (page 41) to Off.
Your TV and AV system automatically
change inputs.
• The connected TV and AV system automatically may change inputs in response to this unit starting
playback or having the GUI screen (ex. Disc Navigator) displayed. If you do not want your TV and AV
system to change inputs in this way, set this unit HDMI Control (page 41) to Off.
The remote control doesn’t seem to work. • The CONTROL IN jack on the rear panel is connected: Point the remote control at the connected
component to control this player.
• The remote control is too far from the player, or the angle with the remote sensor is too wide: Use
the remote within its operating range (see Using the remote control on page 6).
• The batteries are exhausted: Put in new ones (see Putting the batteries in the remote control on
page 6).
• If you are using an external IR receiver, you may need to set the IR RECEIVER switch (see Using an
external IR receiver with this player on page 15).
Settings are cancelled.
• When the power is cut due to power failure or by unplugging the power cord during operation,
settings will be cancelled. See Moving the player on page 45 for proper shutdown instructions.
After inserting a disc, a ‘Loading’ message • When you have inserted a disc containing PC files, the time necessary to load the files contained on
is displayed but playback does not begin.
the disc varies by how many files are present. The process can take anywhere from a few minutes to
upwards of ten minutes.
On hybrid discs with BD and DVD layers, • Change the Set hybrid disc playback layer to DVD (page 41).
the DVD layer cannot be played back.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Remedy
09
On hybrid discs with BD and CD layers,
the CD layer cannot be played back.
• Change the Set hybrid disc playback layer to CD (page 41).
When the Set hybrid disc playback layer • When the layer set to playback at Set hybrid disc playback layer is not present on an inserted hybrid
is set to DVD and you insert a hybrid disc
with BD and CD layers, the BD layer is
played back.
disc, the BD layer is played back.
The Set hybrid disc playback layer
setting cannot be changed (it is grayed
out).
• You cannot change the Set hybrid disc playback layer when a disc is inserted. Eject the disc to
make changes.
A ‘’ appears in the file name.
• A character that cannot be displayed on this unit is included in the file name. Use only
alphanumeric characters if you want file names to be displayed correctly on this player.
The power automatically turns on.
• This unit’s power may be turned on when you control this unit from a connected plasma television.
If you do not want this unit to be turned on in this way, set this unit’s HDMI Control to Off (page 41).
Dolby Digital Plus
Glossary
Dolby Digital Plus is the next-generation audio technology for all
high-definition programming and media. It combines the efficiency
to meet future broadcast demands with the power and flexibility to
realize the full audio potential expected in the upcoming high-
definition era. Built on Dolby Digital, the multi-channel audio
standard for BD and DVD, Dolby Digital Plus has been designed for
the next-generation AV Systems (amplifier or AV receiver) but
remains fully compatible with all current AV Systems.
Analog audio
An electrical signal that directly represents sound. Compare this to
digital audio which can also be an electrical signal, but is an indirect
representation of sound. See also Digital audio.
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are
4:3 (in other words, the screen is almost square); widescreen
models are 16:9 (the screen is almost twice as wide as it is high).
Dolby Digital Plus delivers multi-channel audio programs of up to
7.1 channels and supports multiple programs in a single encoded
bitstream with the maximum bit rate potential of 6 Mbps and the
maximum bit rate performance of 1.7 Mbps on BD, and it outputs
Dolby Digital bitstreams for playback on existing Dolby Digital
systems. Dolby Digital Plus can accurately reproduce the sound
originally intended by directors and producers.
BD-J
BD-J is the Java specification for BD-ROM, allowing content
providers to put interactive material linked to specific titles on the
disc.
It also features multi-channel sound with discrete channel output,
interactive mixing and streaming capability in advanced systems.
BDAV
Supported by HDMI (High-Definition Multimedia Interface), a single-
cable digital connection is possible for high-definition audio and
video.
BDAV is one of the application formats used by writable Blu-ray
Discs (BD-R or BD-RE). It corresponds to the VR mode of the DVD
standard.
Dolby TrueHD
BDMV
Dolby TrueHD is the next-generation lossless encoding technology
developed for high-definition optical discs in the upcoming era.
BDMV is one of the Blu-ray Disc standards (application standard for
BD-ROM). It corresponds to the Video mode of the DVD standard.
Dolby TrueHD delivers tantalizing sound that is bit-for-bit identical to
the studio master, unlocking the true high-definition entertainment
experience on high-definition optical discs in the next generation.
Default Gateway
Default Gateway is a node on a computer network that serves as an
access point to another network. A default gateway (such as a
computer and router) is used to forward all traffic that is not
addressed to a station within the local subnet.
When coupled with high-definition video, Dolby TrueHD offers an
unprecedented home theater experience with stunning sound and
high-definition picture.
DHCP (Dynamic Host Configuration Protocol) Server
A DHCP server is a server that allocates IP addresses to hosts
(network devices). In most cases, a broadband router serves as a
DHCP server in a home network.
It supports bit rates of up to 18 Mbps and records up to 8 full-range
channels individually with 24-bit/96 kHz audio. It also features
extensive metadata including dialogue normalization and dynamic
range control. Supported by HDMI (High-Definition Multimedia
Interface), a single-cable digital connection is possible for high-
definition audio and video. BD standards currently limit their
maximum number of audio channels to eight, whereas Dolby Digital
Plus and Dolby TrueHD support more than eight audio channels.
Digital audio
An indirect representation of sound by numbers. During recording,
the sound is measured at discrete intervals by an analog-to-digital
converter, generating a stream of numbers. On playback, a
digital-to-analog converter generates an analog signal based on
these numbers. See also Sampling frequency and Analog audio.
DRM (Digital Rights Management)
DRM is one of several technologies that controls access to and use
of digital data, such as music, movies and other copyrighted
contents.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
DTS-HD High Resolution Audio
Progressive scan video
09
DTS-HD High Resolution Audio provides sound quality which far
outpaces that of the current DVD discs with constant data rates
from 1.5 Mbps to 6.0 Mbps for Blu-ray Disc. DTS-HD High
Resolution Audio is capable of up to 7.1 channels of audio at a
sampling frequency of 96 kHz/24 bits so the original sound is finely
and faithfully reproduced with less disc space compared to DTS-HD
Master Audio. The result of using DTS-HD High Resolution Audio
use is especially significant when watching high definition video as
the sound that is clearer than ever creates the whole new movie
experience right at home.
Also called non-interlaced video, this method of displaying a picture
updates all the lines in one pass, resulting in a more stable,
flicker-free image than interlaced video (for a given scanning rate).
See also Interlaced video.
Regions (DVD-Video and BD-ROM)
These associate discs and players with particular areas of the world.
This unit will only play discs that have a compatible region code (i.e.,
the same code as your player). You can find the region code of your
unit by looking on the rear panel. Some discs are compatible with
more than one region (or all regions).
Dynamic range
Note that the region systems for DVD and BD are not the same.
The difference between the quietest and loudest sounds possible in
an audio signal (without distorting or getting lost in noise). Dolby
Digital and DTS soundtracks are capable of a very wide dynamic
range, delivering dramatic cinema-like effects.
Sampling frequency
The rate at which sound is measured to be turned into digital audio
data. The higher the rate, the better the sound quality, but the more
digital information is generated. For example, a sampling frequency
of 44.1 kHz means 44 100 samples (measurements) per second. See
also Digital audio.
Ethernet
A frame-based computer networking technology for local area
networks (LANs). This player supports 100BASE-TX.
Subnet mask
File extension
The IP address is divided into the network address part and the host
address part. The subnet mask is expressed as ‘255.255.255.0’. In
most cases, the subnet mask is automatically assigned by the
DHCP server.
A tag added to the end of a filename to indicate the type of file. For
example, “.jpg” indicates an JPEG image file.
HDMI
HDMI (High-Definition Multimedia Interface) is a high-speed digital
interface which has the capability to support standard or
high-definition video plus standard to multi-channel
surround-sound audio on a single digital connection.
Interactive audio
Interactive audio is Linear PCM (LPCM) audio activated by a
BD-ROM application and mixed with the primary audio. It is typically
used to provide dynamic sounds associated with interactive
applications, such as button sounds.
Interlaced video
A method of displaying a picture in which odd-numbered lines are
updated in one pass, then even-numbered lines updated in the next.
See also Progressive scan video.
IP (Internet Protocol) address
A unique number that devices use in order to identify and
communicate with each other on a network utilizing the Internet
Protocol standard, such as ‘192.168.0.1’. No duplicate numbers are
allowed in the network.
LAN cable
A cable that has an 8-pin modular plug on each end and is different
from a telephone plug which has 4-pins.
MAC (Media Access Control) address
An address attached to the port of any device. The MAC address
cannot be changed.
PCM (Pulse Code Modulation)
A common system of encoding digital audio. Excellent quality, but
requires a lot of data compared to formats such as Dolby Digital and
MPEG audio. For compatibility with digital audio recorders and AV
amplifiers with digital inputs, this unit can convert Dolby Digital,
DTS and MPEG audio to PCM. See also Digital audio.
Pop-up menu (BD only)
A context-sensitive menu that can be used without interrupting
playback of a BD.
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
License
09
[MPEG4IP]
[OpenSSL]
OpenSSL License
Copyright © 1998-2004 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed
by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”.
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written
permission. For written permission, please contact [email protected].
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the
OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit (http://www.openssl.org/)”.
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson
Original SSLeay License
Copyright © 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found
in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should
be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online
or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic
software written by Eric Young ([email protected])”
The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related:-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This
product includes software written by Tim Hudson ([email protected])”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and
put under another distribution licence [including the GNU Public Licence.]
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
[tiff]
09
Copyright © 1988-1997 Sam Leffler
Copyright © 1991-1997 Silicon Graphics, Inc.
THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
[Howl]
Copyright © 2003, 2004 Porchdog Software All rights reserved.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
[UPNPLib/Intel Stack]
[JPEG image compression]
If only executable code is distributed, then the accompanying documentation must state that “this software is based in part on the work of the Independent
JPEG Group”.
[libpng]
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following this sentence. libpng version 1.2.6, December 3, 2004, is Copyright © 2004 Glenn
Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing
Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright © 2000-2002 Glenn Randers-Pehrson, and are distributed according to the
same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill
any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is
with the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright © 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the
same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license
as libpng-0.88, with the following individuals added to the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, “Contributing Authors” is defined as the following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without
limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect,
incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such
damage.
09
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following
restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any source or altered source distribution.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG
file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.
A “png_get_copyright” function is available, for convenient use in “about” boxes and the like: printf(“%s”,png_get_copyright(NULL)); Also, the PNG logo (in PNG
format, of course) is supplied in the files “pngbar.png” and “pngbar.jpg (88x31)” and “pngnow.png” (98x31).
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
December 3, 2004
[zlib]
[FreeType]
The FreeType Project is Copyright © 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.
THE FREETYPE PROJECT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
[GIFLIB]
The GIFLIB distribution is Copyright © 1997 Eric S. Raymond
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
[libhttp]
Copyright © 2000-2004 Dag-Erling Smørgrav
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer in this position and unchanged.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The following copyright applies to the base64 code:
Copyright 1997 Massachusetts Institute of Technology
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that both the
above copyright notice and this permission notice appear in all copies, that both the above copyright notice and this permission notice appear in all supporting
documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior
permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
THIS SOFTWARE IS PROVIDED BY M.I.T. “AS IS”. M.I.T. DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
[Vera.ttf/VeraMono.ttf]
09
Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera SansBitstreamVeraSans-RomanRelease 1.10 Copyright © 2003 by Bitstream, Inc. All
Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.
[TinyLogin]
This software is Copyright 1988 - 1994, Julianne Frances Haugh. All rights reserved.
[Shadow Utilities]
This software is Copyright 1988 - 1994, Julianne Frances Haugh. All rights reserved.
Bigelow & Holmes Inc and URW++ GmbH Luxi font license
[Luxi fonts]
Luxi fonts Copyright © 2001 by Bigelow & Holmes Inc. Luxi font instruction code Copyright © 2001 by URW++ GmbH. All Rights Reserved. Luxi is a regis-tered
trademark of Bigelow & Holmes Inc.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR
OTHER RIGHT. IN NO EVENT SHALL BIGELOW & HOLMES INC. OR URW++GMBH. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GEN-ERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFT-WARE.
[GNU GENERAL PUBLIC LICENSE]
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to
guarantee your freedom to share and change free software – to make sure the software is free for all its users. This General Public License applies to most of
the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is
covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the
software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate
to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make
sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify
the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software
is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others
will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain
patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not
licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of
this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or
any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or
translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is
not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made
by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such
modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
57
En
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
Download from Www.Somanuals.com. All Manuals Search And Download.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed
as a whole at no charge to all third parties under the terms of this License.
09
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most
ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that
you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to
print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must
be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who
wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to
control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a
storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2
above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above
on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source
distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b
above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means
all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation
of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source
code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object
code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program
or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights
granted herein.
You are not responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed
on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a
consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all
those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the
section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section
has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have
made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to
the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder
who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar
in spirit to the present version, but may differ in detail to address new problems or concerns.
09
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”,
you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the
Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.
10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.
For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which
everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of
warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.
<one line to give the program’s name and a brief idea of what it does.>
Copyright © <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright © year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’. This is free software, and you are welcome to redistribute it under
certain conditions; type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may
be called something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu items – whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is
a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider
it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of
this License.
[GNU LESSER GENERAL PUBLIC LICENSE]
Version 2.1, February 1999
Copyright © 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Preamble
09
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to
guarantee your freedom to share and change free software – to make sure the software is free for all its users. This license, the Lesser General Public License,
applies to some specially designated software packages – typically libraries – of the Free Software Foundation and other authors who decide to use it. You can
use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular
case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom
to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the
software and use pieces of it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions
translate to certain responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure
that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they
can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We
protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute
and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed
on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might
be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users
of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must
be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License,
applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit
linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative
of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser
General Public License permits more lax criteria for linking other code with the library.
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also
provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary
General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard.
To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free
libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example,
permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU
Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library
has the freedom and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library”
and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party
saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of
those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either
the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications
and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code
for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using
the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use
of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications
or work under the terms of Section 1 above, provided that you also meet all of these conditions:
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
a) The modified work must itself be a software library.
09
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an
argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such
function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute
square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied
function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must
be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who
wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to
control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter
all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and
derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and
2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the
same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object
code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a
“work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
6. However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the
Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such
executables.
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the
Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself
a library. The threshold for this to be true is not precisely defined by law.
7. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less
in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus
portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing
that work also fall under Section 6, whether or not they are linked directly with the Library itself.
8. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions
of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and
reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You
must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among
them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work
(which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable
“work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to
recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already
present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of
the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge
no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from
the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable
from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
09
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating
system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.
9. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this
License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is
otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed
under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying
uncombined form of the same work.
10.You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy,
modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have
received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
11.You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or
its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work
based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library
or works based on it.
12.Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy,
distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of
the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.
13.If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed
on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a
consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those
who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution
of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to
apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section
has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have
made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to
the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
14.If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who
places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted
only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
15.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”,
you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the
Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.
16.If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask
for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and
reuse of software generally.
NO WARRANTY
17.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
18.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE
WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Apply These Terms to Your New Libraries
09
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute
and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion
of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.
<one line to give the library’s name and a brief idea of what it does.>
Copyright © <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin
Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a
sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
[Linux Source Notice]
The software programs used on this product include the Linux operating system. The Linux contains software licensed for use based on the terms of a GNU
General Public License. The machine readable copy of the corresponding source code is available for the cost of distribution.
For more information or to obtain a copy, contact your local Pioneer Customer Service center.
Details of the GNU General Public License can be found at the GNU website (http://www.gnu.org).
Audio characteristics
Specifications
Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hz to 22 kHz
S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 dB
Dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 dB
General
Total harmonic distortion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0015 %
Wow and flutter . . . . . . . . . . . . Limit of measurement (0.001 % W. PEAK) or lower
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Blu-ray Disc PLAYER
(BD-ROM, DVD-Video, DVD-R/-RW, CD, network file playback)
Power requirements . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V to 240 V, 50 Hz/60 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 W
Power consumption (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.5 W
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 kg
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 420 mm (W) x 103 mm (H) x 353 mm (D)
Operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5 °C to +35 °C
Operating humidity . . . . . . . . . . . . . . . . . . . . . . . . . . .5 % to 85 % (no condensation)
Digital output
Optical digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optical digital jack
Coaxial digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack
Other terminals
LAN terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ethernet jack (100BASE-TX)
Control in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minijack (3.5 ø)
IR in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minijack (3.5 ø)
HDMI output
HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-pin
Accessories
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/R6P dry cell batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Stereo audio cable (red/white plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Video cable (yellow plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
HDMI cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
LAN cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operating instructions
Component Video output (Y, PB, PR
)
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω)
PB, PR: 0.7 Vp-p (75 Ω)
Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jacks
S-Video output
Y (luminance) - Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)
C (colour) - Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 mVp-p (75 Ω)
Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-Video jack
The specifications and design of this product are subject to change without notice.
Video output
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)
Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack
Audio output (1 stereo pair)
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . During audio output
200 mVrms (1 kHz, –20 dB)
Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack
Audio output (multi-channel/L, R, C, SW, LS, RS)
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . During audio output
200 mVrms (1 kHz, –20 dB)
Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002_B_En
Published by Pioneer Corporation.
Copyright © 2007 Pioneer Corporation.
All rights reserved.
<07H000001>
<VRB1479-A>
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|