Pioneer Automobile Accessories CNSD 110FM User Manual

2010 NAVIGATION UPGRADE SD-CARD

This software upgrade will result in changes to certain

features and availability of information. While the

changes are intended to improve the overall user

experience for most users, Pioneer and its licensors

disclaim any warranty or liability for damages in

connection with such changes.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Precaution

Read the entire manual before upgrading

the program of your navigation system.

This package is unique, and cannot be in-

stalled on more than one unit.

Web-connected computer is required for

online issuance of password.

After-sales service for Pioneer products

Please contact the dealer or distributor from

which you purchased the product for after-

sales service (including warranty conditions)

or any other information. In case the necessary

information is not available, please contact the

companies listed below.

Please do not ship your product to the compa-

nies at the addresses listed below for repair

without making advance contact.

Failure to operate

Should the navigation system fail to oper-

ate properly, contact your dealer or nearest

authorized Pioneer Service Station.

Do not lose the supplied Media Number

Card (MEDIA NUMBER CARD). If the

Media Number Card is lost, reissue of the

Media Number (MEDIA NUMBER) is not

possible. Also you must submit the Media

Number Card when repairs are needed.

The card is necessary as proof of authenti-

city if service is required (including recov-

ery).

U.S.A

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION

P.O. Box 1760 Long Beach, CA 90801-1760

800-421-1404

CANADA

Pioneer Electronics of Canada, Inc.

CUSTOMER SATISFACTION DEPARTMENT

300 Allstate Parkway Markham, Ontario

L3R 0P2

1-877-283-5901

905-479-4411

For warranty information, please see the Lim-

ited Warranty sheet included with your pro-

duct.

SD memory card

The SD memory card and SDHC memory card

are collectively referred to as the “SD memory

card”.

p Keep the SD memory card out of the reach

of small children to prevent them from ac-

cidentally swallowing it.

p Do not store the SD memory card in high

temperatures or direct sunlight.

p Do not subject the SD memory card to

shock or impact.

p Do not allow the SD memory card to come

into contact with liquids. Damage to the

SD memory card and your products could

result from contact with liquids.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precaution

p Be careful not to touch terminals on the

SD memory card. Doing so may cause con-

nection failures. If any terminals are dirty,

wipe them with a clean dry cloth.

Conventions used in this

manual

Before moving on, take a few minutes to read

the following information about the conven-

tions used in this manual. Familiarity with

these conventions will help you greatly as you

learn how to use your new equipment.

Buttons on your navigation system are de-

scribed in ALL CAPITAL, BOLD lettering:

e.g.)

Press the MODE button or the HOME but-

ton.

p SDHC Logo is a trademark of SD-3C, LLC.

Items in different menus, screen titles, and

functional components are described in

bold with double quotation marks “ ”:

e.g.)

Displaying the “System Settings” screen

Touch panel keys that are available on the

screen are described in bold in brackets [ ]:

e.g.)

p SD Logo is a trademark of SD-3C, LLC.

Manual overview

Touch [Settings].

This manual describes how to get the pass-

word and activate the upgrade. It also provides

an overview of how functions change after the

upgrade.

Extra information, alternatives and other

notes are presented in the following for-

mat:

e.g.)

p If the home location has not been stored

yet, set the location first.

Descriptions of separate operations to be

performed on the same screen are indi-

cated with # at the beginning of the de-

scription:

e.g.)

# Touch [OK].

References are indicated like this:

e.g.)

By upgrading AVIC-Z110BTwith this product,

functions and operations will be equivalent to

AVIC-Z120BT. Therefore, obtain the Operation

Manual for AVIC-Z120BT and use it as your pri-

mary reference.

In Canada

= For details of the operation, refer to

Checking the device number on page

21.

Models to be upgraded

This package can upgrade the software pro-

gram and database of the following models:

AVIC-Z110BT

Download from Www.Somanuals.com. All Manuals Search And Download.

Precaution

Displaying Voice icon

The Voice icon displayed on the map screen

will no longer appear.

Visit our website

Visit us at the following site:

Switching the auto antenna setting

Auto antenna setting will be unavailable.

Antenna extension will be linked with naviga-

tion system power on or off.

In Canada

of your purchase on file to help you refer to

this information in the event of an insurance

claim such as loss or theft.

Changing the voice output of the

navigation guidance

Speaker output settings for guidance audio

and phone audio will be unavailable.

Navigation guidance and phone audio will be

output from both left and right speakers.

Receive updates on the latest products and

technologies.

Download owner’s manuals, order product

catalogs, research new products, and much

more.

Receive notices of software upgrades and

software updates.

Displaying power voltage

“Power Voltage” on the “GPS Status” screen

will no longer appear.

Setting items to be deleted

and initialized by upgrade

The following data and settings will be cleared

and reset to default values. Other items will be

retained. However, some items are not listed

because the setting can be easily recovered by

users, such as the last cursor position on the

map screen.

Route setting

Current route

Learning route data

Map function

Setting of “Overlay POI”

The user data stored in the internal memory of

the unit may be erased if an unexpected error

occurs during software installation. Pioneer is

not responsible for any data loss or unavailabil-

ity of user data.

Functions disabled by upgrade

Upgrading disables the following functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

other means. You shall not use the Software to

operate a service bureau or for any other use

involving the processing of data for other per-

sons or entities.

Pioneer and its licensor(s) shall retain all copy-

right, trade secret, patent and other proprie-

tary ownership rights in the Software. The

Software is copyrighted and may not be cop-

ied, even if modified or merged with other pro-

ducts. You shall not alter or remove any

tained in or on the Software.

You may transfer all of your license rights in

the Software, the related documentation and a

copy of this License Agreement to another

party, provided that the party reads and agrees

to accept the terms and conditions of this Li-

cense Agreement.

PIONEER CNSD-110FM - for

U.S.A.

THIS IS A LEGAL AGREEMENT BETWEEN

YOU, AS THE END USER, AND PIONEER

ELECTRONICS (USA) INC. (“PIONEER”).

PLEASE READ THE TERMS AND CONDI-

TIONS OF THIS AGREEMENT CAREFULLY BE-

FORE USING THE SOFTWARE INSTALLED ON

THE PIONEER PRODUCTS. BY USING THE

SOFTWARE INSTALLED ON THE PIONEER

PRODUCTS, YOU AGREE TO BE BOUND BY

THE TERMS OF THIS AGREEMENT. THE SOFT-

WARE INCLUDES A DATABASE LICENSED BY

THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),

AND YOUR USE OF THE DATABASE IS COV-

ERED BY THE SUPPLIERS’ SEPARATE

TERMS, WHICH ARE ATTACHED TO THIS

AGREEMENT (Refer to page 10). IF YOU DO

NOT AGREE WITH ALL OF THESE TERMS,

PLEASE RETURN THE PIONEER PRODUCTS

(INCLUDING THE SOFTWARE, AND ANY

WRITTEN MATERIALS) WITHIN FIVE (5) DAYS

OF RECEIPT OF THE PRODUCTS, TO THE

AUTHORIZED PIONEER DEALER FROM

WHICH YOU PURCHASED THEM. USE OF

THE SOFTWARE SHALL BE DEEMED TO BE

YOUR CONSENT TO THE LICENSE AGREE-

MENT.

DISCLAIMER OF WARRANTY

The Software and related documentation are

provided to you “AS IS”. PIONEER AND ITS LI-

CENSOR(S) (for the purpose of provisions 2

and 3, Pioneer and its licensor(s) shall be col-

lectively referred to as “Pioneer”) MAKES AND

YOU RECEIVE NO WARRANTY FOR THE SOFT-

WARE, WHETHER EXPRESS OR IMPLIED,

AND ALL WARRANTIES OF MERCHANTABIL-

ITY AND FITNESS FOR ANY PARTICULAR

PURPOSE FOR THE SOFTWARE ARE EX-

PRESSLY EXCLUDED. SOME STATES DO NOT

ALLOW EXCLUSION OF IMPLIED WARRAN-

TIES, SO THE ABOVE EXCLUSION MAY NOT

APPLY TO YOU. The Software is complex and

may contain some nonconformities, defects or

errors. Pioneer does not warrant that the Soft-

ware will meet your needs or expectations,

that operation of the Software will be error free

or uninterrupted, or that all non-conformities

can or will be corrected. Furthermore, Pioneer

does not make any representations or warran-

ties regarding the use or results of the use of

the Software in terms of its accuracy, reliability

or otherwise.

GRANT OF LICENSE

Pioneer grants to you a non-transferable, non

exclusive license to use the software installed

on the Pioneer products (the “Software”) and

the related documentation solely for your own

personal use or for internal use by your busi-

ness, only on such Pioneer products.

You shall not copy, reverse engineer, translate,

port, modify or make derivative works of the

Software. You shall not loan, rent, disclose,

publish, sell, assign, lease, sublicense, market

or otherwise transfer the Software or use it in

any manner not expressly authorized by this

agreement. You shall not derive or attempt to

derive the source code or structure of all or

any portion of the Software by reverse engi-

neering, disassembly, decompilation, or any

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

LIMITATION OF LIABILITY

regulations of the United States. If the Soft-

ware has been rightfully obtained by you out-

side of the United States, you agree that you

will not re-export the Software nor any other

technical data received from Pioneer, nor the

direct product thereof, except as permitted by

the laws and regulations of the United States

and the laws and regulations of the jurisdic-

tion in which you obtained the Software.

IN NO EVENT SHALL PIONEER BE LIABLE

FOR ANY DAMAGES, CLAIM OR LOSS IN-

CURRED BY YOU (INCLUDING, WITHOUT LIM-

ITATION, COMPENSATORY, INCIDENTAL,

INDIRECT, SPECIAL, CONSEQUENTIAL, OR

EXEMPLARY DAMAGES, LOST PROFITS, LOST

INCOME, LOST SALES OR BUSINESS, EXPEN-

DITURES, INVESTMENTS, OR COMMITMENTS

IN CONNECTION WITH ANY BUSINESS, LOSS

OF ANY GOODWILL, OR DAMAGES) RESULT-

ING FROM THE USE OF OR INABILITY TO USE

THE SOFTWARE, EVEN IF PIONEER HAS

BEEN INFORMED OF, KNEW OF, OR SHOULD

HAVE KNOWN OF THE LIKELIHOOD OF

SUCH DAMAGES. THIS LIMITATION APPLIES

TO ANY AND ALL CAUSES OF ACTION INDIVI-

DUALLY OR IN THE AGGREGATE, INCLUDING

WITHOUT LIMITATION BREACH OF CON-

TRACT, BREACH OF WARRANTY, NEGLI-

GENCE, STRICT LIABILITY,

MISREPRESENTATION, AND OTHER TORTS.

IF PIONEER’S WARRANTY DISCLAIMER OR

LIMITATION OF LIABILITY SET FORTH IN THIS

AGREEMENT SHALL OR FOR ANY REASON

WHATSOEVER BE HELD UNENFORCEABLE

OR INAPPLICABLE, YOU AGREE THAT

PIONEER’S LIABILITY SHALL NOT EXCEED

FIFTY PERCENT (50%) OF THE PRICE PAID BY

YOU FOR THE ENCLOSED PIONEER PRO-

DUCT.

TERMINATION

This Agreement is effective until terminated.

You may terminate it at any time by destroying

the Software. The Agreement also will termi-

nate if you do not comply with any terms or

conditions of this Agreement. Upon such ter-

mination, you agree to destroy the Software.

U.S. GOVERNMENT END USERS

If the Software is being acquired by or on be-

half of the United States government or any

other entity seeking or applying rights similar

to those customarily claimed by the United

States government, the Data is licensed with

“Limited Rights”. Utilization of the Software is

subject to the restrictions specified in the

“Rights in Technical Data” clause at DFARS

252.227-7013, or the equivalent clause for non-

defense agencies. Pioneer Electronics (USA)

Inc., 2265 East 220th Street, Long Beach, CA

90810.

Some states do not allow the exclusion or lim-

itation of incidental or consequential da-

mages, so the above limitation or exclusion

may not apply to you. This warranty disclaimer

and limitation of liability shall not be applic-

able to the extent that they are prohibited by

any applicable federal, state or local law which

provides that such a disclaimer or limitation

cannot be waived or preempted.

MISCELLANEOUS

This is the entire Agreement between Pioneer

and you regarding its subject matter. No

change in this Agreement shall be effective

unless agreed to in writing by Pioneer. Pioneer

retailers do not have the authority to change

this Agreement. This Agreement shall be gov-

erned by and construed in accordance with

the internal laws of the State of California. If

any provision of this Agreement is declared in-

valid or unenforceable, the remaining provi-

sions of this Agreement shall remain in full

force and effect.

EXPORT LAW ASSURANCES

You agree and certify that neither the Software

nor any other technical data received from

Pioneer, nor the direct product thereof, will be

exported outside the United States except as

authorized and as permitted by the laws and

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

other means. You shall not use the Software to

operate a service bureau or for any other use

involving the processing of data for other per-

sons or entities.

Pioneer and its licensor(s) shall retain all copy-

right, trade secret, patent and other proprie-

tary ownership rights in the Software. The

Software is copyrighted and may not be cop-

ied, even if modified or merged with other pro-

ducts. You shall not alter or remove any

tained in or on the Software.

You may transfer all of your license rights in

the Software, the related documentation and a

copy of this License Agreement to another

party, provided that the party reads and agrees

to accept the terms and conditions of this Li-

cense Agreement.

PIONEER CNSD-110FM - for

Canada

THIS IS A LEGAL AGREEMENT BETWEEN

YOU, AS THE END USER, AND PIONEER

ELECTRONICS OF CANADA, INC.

(“PIONEER”). PLEASE READ THE TERMS AND

CONDITIONS OF THIS AGREEMENT CARE-

FULLY BEFORE USING THE SOFTWARE IN-

STALLED ON THE PIONEER PRODUCTS. BY

USING THE SOFTWARE INSTALLED ON THE

PIONEER PRODUCTS, YOU AGREE TO BE

BOUND BY THE TERMS OF THIS AGREE-

MENT. THE SOFTWARE INCLUDES A DATA-

BASE LICENSED BY THIRD PARTY SUPPLIER

(S) (“SUPPLIERS”), AND YOUR USE OF THE

DATABASE IS COVERED BY THE SUPPLIERS’

SEPARATE TERMS, WHICH ARE ATTACHED

TO THIS AGREEMENT (Refer to page 10). IF

YOU DO NOT AGREE WITH ALL OF THESE

TERMS, PLEASE RETURN THE PIONEER PRO-

DUCTS (INCLUDING THE SOFTWARE, AND

ANY WRITTEN MATERIALS) WITHIN FIVE (5)

DAYS OF RECEIPT OF THE PRODUCTS, TO

THE AUTHORIZED PIONEER DEALER FROM

WHICH YOU PURCHASED THEM. USE OF

THE SOFTWARE SHALL BE DEEMED TO BE

YOUR CONSENT TO THE LICENSE AGREE-

MENT.

DISCLAIMER OF WARRANTY

The Software and related documentation are

provided to you “AS IS”. PIONEER AND ITS LI-

CENSOR(S) (for the purpose of provisions 2

and 3, Pioneer and its licensor(s) shall be col-

lectively referred to as “Pioneer”) MAKES AND

YOU RECEIVE NO WARRANTY FOR THE SOFT-

WARE, WHETHER EXPRESS OR IMPLIED,

AND ALL WARRANTIES OF MERCHANTABIL-

ITY AND FITNESS FOR ANY PARTICULAR

PURPOSE FOR THE SOFTWARE ARE EX-

PRESSLY EXCLUDED. SOME STATES DO NOT

ALLOW EXCLUSION OF IMPLIED WARRAN-

TIES, SO THE ABOVE EXCLUSION MAY NOT

APPLY TO YOU. The Software is complex and

may contain some nonconformities, defects or

errors. Pioneer does not warrant that the Soft-

ware will meet your needs or expectations,

that operation of the Software will be error free

or uninterrupted, or that all non-conformities

can or will be corrected. Furthermore, Pioneer

does not make any representations or warran-

ties regarding the use or results of the use of

the Software in terms of its accuracy, reliability

or otherwise.

GRANT OF LICENSE

Pioneer grants to you a non-transferable, non

exclusive license to use the software installed

on the Pioneer products (the “Software”) and

the related documentation solely for your own

personal use or for internal use by your busi-

ness, only on such Pioneer products.

You shall not copy, reverse engineer, translate,

port, modify or make derivative works of the

Software. You shall not loan, rent, disclose,

publish, sell, assign, lease, sublicense, market

or otherwise transfer the Software or use it in

any manner not expressly authorized by this

agreement. You shall not derive, or attempt to

derive, the source code or structure of all or

any portion of the Software by reverse engi-

neering, disassembly, decompilation, or any

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

LIMITATION OF LIABILITY

obtained by you outside of Canada, you agree

that you will not re-export the Software nor any

other technical data received from Pioneer,

nor the direct product thereof, except as per-

mitted by the laws and regulations of Canada

and the laws and regulations of the jurisdic-

tion in which you obtained the Software.

IN NO EVENT SHALL PIONEER BE LIABLE

FOR ANY DAMAGES, CLAIM OR LOSS IN-

CURRED BY YOU (INCLUDING, WITHOUT LIM-

ITATION, COMPENSATORY, INCIDENTAL,

INDIRECT, SPECIAL, CONSEQUENTIAL, OR

EXEMPLARY DAMAGES, LOST PROFITS, LOST

SALES OR BUSINESS, EXPENDITURES, IN-

VESTMENTS, OR COMMITMENTS IN CON-

NECTION WITH ANY BUSINESS, LOSS OF

ANY GOODWILL, OR DAMAGES) RESULTING

FROM THE USE OF OR INABILITY TO USE

THE SOFTWARE, EVEN IF PIONEER HAS

BEEN INFORMED OF, KNEW OF, OR SHOULD

HAVE KNOWN OF THE LIKELIHOOD OF

SUCH DAMAGES. THIS LIMITATION APPLIES

TO ALL CAUSES OF ACTION IN THE AGGRE-

GATE, INCLUDING WITHOUT LIMITATION

BREACH OF CONTRACT, BREACH OF WAR-

RANTY, NEGLIGENCE, STRICT LIABILITY, MIS-

REPRESENTATION, AND OTHER TORTS. IF

PIONEER’S WARRANTY DISCLAIMER OR

LIMITATION OF LIABILITY SET FORTH IN THIS

AGREEMENT SHALL OR FOR ANY REASON

WHATSOEVER BE HELD UNENFORCEABLE

OR INAPPLICABLE, YOU AGREE THAT

PIONEER’S LIABILITY SHALL NOT EXCEED

FIFTY PERCENT (50%) OF THE PRICE PAID BY

YOU FOR THE ENCLOSED PIONEER PRO-

DUCT.

TERMINATION

This Agreement is effective until terminated.

You may terminate it at any time by destroying

the Software. The Agreement also will termi-

nate if you do not comply with any terms or

conditions of this Agreement. Upon such ter-

mination, you agree to destroy the Software.

MISCELLANEOUS

This is the entire Agreement between Pioneer

and you regarding its subject matter. No

change in this Agreement shall be effective

unless agreed to in writing by Pioneer. Pioneer

retailers do not have the authority to change

this Agreement. This Agreement shall be gov-

erned by and construed in accordance with

the internal laws of the Province of Ontario

and the federal laws of Canada applicable

therein. If any provision of this Agreement is

declared invalid or unenforceable, the remain-

ing provisions of this Agreement shall remain

in full force and effect.

Some states do not allow the exclusion or lim-

itation of incidental or consequential da-

mages, so the above limitation or exclusion

may not apply to you. This warranty disclaimer

and limitation of liability shall not be applic-

able to the extent that they are prohibited by

any applicable federal, state or local law which

provides that such a disclaimer or limitation

cannot be waived or preempted.

EXPORT LAW ASSURANCES

You agree and certify that neither the Software

nor any other technical data received from

Pioneer, nor the direct product thereof, will be

exported outside Canada except as authorized

and as permitted by the laws and regulations

of Canada. If the Software has been rightfully

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

erate, or obscure any copyright notice or pro-

prietary legend contained in or on the Data.

TERMS AND CONDITIONS

FOR THE TELE ATLAS DATA

End User Licensing Terms

THIS IS A LEGAL AGREEMENT (THE “AGREE-

MENT”) BETWEEN YOU, THE END USER, AND

PIONEER and its licensors of Data product

(sometimes collectively “Licensors”). BY

USING YOUR COPY OF THE LICENSED DATA,

YOU AGREE TO THE TERMS AND CONDI-

TIONS OF THIS AGREEMENT.

Limitation of Liability.

NEITHER TELE ATLAS NOR ITS SUPPLIERS

SHALL BE LIABLE TO THE UNDERSIGNED

FOR ANY INCIDENTAL, CONSEQUENTIAL,

SPECIAL, INDIRECT OR EXEMPLARY DA-

MAGES ARISING OUT OF THIS AGREEMENT,

INCLUDING LOST PROFITS OR COSTS OF

COVER, LOSS OF USE OR BUSINESS INTER-

RUPTION OR THE LIKE, REGARDLESS OF

WHETHER THE PARTY WAS ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

NOTWITHSTANDING ANYTHING TO THE CON-

TRARY CONTAINED HEREIN, TELE ATLAS

SHALL HAVE NO MONETARY LIABILITY TO

THE UNDERSIGNED FOR ANY CAUSE (RE-

GARDLESS OF THE FORM OF ACTION)

UNDER OR RELATING TO THIS AGREEMENT.

Grant of License.

Licensors grant you a non-transferable, nonex-

clusive license to use the map data and busi-

ness points of interest information (the

“POIs”), owned by Tele Atlas, (together, the

“Data”) contained on these discs, solely for

personal, non-commercial use and not to op-

erate a service bureau or for any other use in-

volving the processing of data of other

persons or entities. You may make one (1)

copy of the Data for archival or backup pur-

poses only but you may not otherwise copy, re-

produce, modify, make derivative works, derive

the structure of or reverse engineer the Data.

The Data is restricted for use with the

PIONEER Product(s). The Data contains confi-

dential and proprietary information and mate-

rials, and may contain trade secrets, so you

agree to hold the Data in confidence and in

trust and not to disclose the Data or any por-

tions in any form, including by renting, leas-

ing, publishing, leasing, sublicensing or

transferring the Data to any third party. You

are explicitly prohibited from downloading the

digital maps and programmes contained in

the Data or from transferring these to another

data carrier or computer. You are prohibited

from removing or obscuring any copy right,

trademark notice or restricted legend.

Ownership.

The Data is copyrighted by Tele Atlas and its Li-

censors and they retain all ownership rights in

the Data. You agree not to alter, remove, oblit-

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

Warranty Disclaimer.

claim of any kind or character, including but

not limited to attorney’s fees, arising out of or

in connection with any use or possession by

you of the Data.

THE DATA IS PROVIDED ON AN “AS IS” AND

“WITH ALL FAULTS BASIS” AND PIONEER,

ITS LICENSORS, AND ITS LICENSED DISTRI-

BUTORS AND SUPPLIERS (COLLECTIVELY,

“SUPPLIERS”) EXPRESSLY DISCLAIM ALL

OTHER WARRANTIES, EXPRESS OR IM-

PLIED, INCLUDING BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF NON-INFRIN-

GEMENT, MERCHANTABILITY, EFFECTIVE-

NESS, COMPLETENESS, ACCURACY, TITLE

AND FITNESS FOR A PARTICULAR PURPOSE.

PIONEER, ITS LICENSORS AND SUPPLIERS

DO NOT WARRANT THAT THE DATA WILL

MEET YOUR REQUIREMENTS OR THAT THE

OPERATION OF THE DATA WILL BE UNINTER-

RUPTED OR ERROR FREE. NO ORAL OR

WRITTEN ADVICE GIVEN BY PIONEER, ITS LI-

CENSORS, SUPPLIERS OR ANY OF THEIR RE-

SPECTIVE EMPLOYEES CREATES A

US. GOVERNMENT RIGHTS.

If End User is an agency, department, or other

entity of the United States Government, or

funded in whole or in part by the United States

Government, then use, duplication, reproduc-

tion, release, modification, disclosure or trans-

fer of this commercial product and

accompanying documentation, is restricted in

accordance with the LIMITED or RESTRICTED

rights as described in any applicable DFARS

or FAR. In case of conflict between any of the

FAR and/or DFARS that may apply to the Li-

censed Tele Atlas Product, the construction

that provides greater limitations on the Gov-

ernment’s rights shall control. Contractor/

manufacturer is Tele Atlas North America,

Inc., 11 Lafayette Street, Lebanon, NH 03766-

1445. Phone: 603.643. 0330. The Licensed Tele

public disclosure provision under any federal,

state or local law, it is agreed that the Licensed

Tele Atlas Products are a trade secret and a

proprietary commercial product and not sub-

ject to disclosure.

WARRANTY OR IN ANY WAY INCREASES

PIONEER’, ITS LICENSORS OR SUPPLIERS

LIABILITY AND YOU MAY NOT RELY ON ANY

SUCH INFORMATION OR ADVICE. THIS DIS-

CLAIMER IS AN ESSENTIAL CONDITION OF

THIS AGREEMENT AND YOU ACCEPT THE

DATA ON THIS BASIS.

Termination.

This Agreement will terminate immediately

and automatically, without notice, if you

breach any term of this Agreement. You agree

that in the event of termination of the Agree-

ment, you shall return the Data (including all

documentation and all copies) to PIONEER

and its suppliers.

Additional provisions for Tele Atlas^®

Premium Points of Interest (the “POIs”).

With respect to the POI Licensed Tele Atlas

Products:

(The following provisions only refer to the pro-

ducts which contain Tele Atlas^®Premium

Points of Interest.)

Indemnity.

You agree to indemnify, defend and hold

PIONEER, its Licensors, and its suppliers (in-

cluding their respective licensors, suppliers,

assignees, subsidiaries, affiliated companies,

and the respective officers, directors, employ-

ees, shareholders, agents and representatives)

free and harmless from and against any liabili-

ty, loss, injury (including injuries resulting in

death), demand, action, cost, expense, or

End User specifically agrees that it shall not:

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

(a) except as otherwise specifically set forth

herein, license or otherwise provide the POI Li-

censed Tele Atlas Products to any third party

for the purposes of resale, sublicensing, redis-

tribution or for the purpose of compiling, en-

hancing, verifying, supplementing, adding to

or deleting from any mailing list, geographic

or trade directories, business directories, clas-

sified directories, classified advertising which

is sold, rented, published, furnished or in any

manner provided to a third party;

(b) make the POI Licensed Tele Atlas Products

available in an on-line environment unless

properly secured and/or encrypted to prevent

unauthorized access to the POI Licensed Tele

Atlas Products; and

either in whole or in part, as a factor in (i) es-

tablishing an individual’s eligibility for credit

or insurance; (ii) connection with underwriting

individual insurance; (iii) evaluating an indivi-

dual for employment or promotions, reassign-

ment or retention as an employee; (iv) in

connection with a determination of an indivi-

dual’s eligibility for a license or other benefit

granted by a governmental authority; or (v) for

soliciting survivors of deceased persons.

(d) create mailing or telemarketing lists unless

authorized in this Agreement.

(e) End User will house the POI Licensed Tele

Atlas Products on the Internet behind firewalls

and will implement a system of controls that

will (i) protect the integrity of the POI Licensed

Tele Atlas Products; (ii) control access to the

POI Licensed Tele Atlas Products and (iii) pre-

vent unauthorized usage or copying of the POI

Licensed Tele Atlas Products.

Data by

Additional provisions for Tele Atlas^®

Brand Icon Licensed Tele Atlas Product (the

“Brand Icon Licensed Tele Atlas Product”):

(The following provisions only refer to the pro-

ducts which contain Tele Atlas^®Brand Icon Li-

censed Tele Atlas Product.)

End User's use of the Brand Icon Licensed

Tele Atlas Product and any portion thereof,

is limited to use solely for the purpose of en-

hancing the value and/or use of the spatial

vector data furnished or made by Tele Atlas.

Notwithstanding anything to the contrary

herein, or in any attachment or exhibit here-

to, in no event shall End User use the

Brand Icon Licensed Tele Atlas Product or

any portion thereof in connection with or in

conjunction with spatial street vector data

furnished or made by a party other than

Tele Atlas. End User may only use the

icons, brand names, logos, trademarks or

other features within (and not separate

from) the map data. In addition, End User

shall not modify or alter the color, shape,

size, and orientation of the Brand Icon Li-

censed Tele Atlas Product as provided to

End User without Tele Atlas’s prior written

approval.

Licensee agrees that the use of Brand Icon

Licensed Tele Atlas Product subject to the

terms and conditions set forth in this Agree-

ment and that there may be additional third

party terms, conditions and restrictions to

which the use of the Brand Icon Licensed

Tele Atlas Product will be subject provided

to the End User from time to time by Licen-

see in the release notes applicable to the

Value Added Product.

(f) End User shall display the POI Licensed

Tele Atlas Product copyright notice at all times

in conjunction with the Tele Atlas copyright

notice. As of the Effective Date of this Agree-

ment, the copyright notice for the POI Li-

censed Tele Atlas Product is:

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

Should End User enter into any commercial

arrangement for advertising, pay-for-place-

ment, promotion or any similar paid brand

marketing exposure with any owners (or

their representatives) of any of the brand

icons supplied with the Brand Icon Li-

censed Tele Atlas Product, Tele Atlas shall

receive no less than twenty five percent

(25%) of any revenues collected in the con-

text of any such commercial arrangement,

unless otherwise agreed-to in advance and

in writing by both parties.

Licensed Tele Atlas Products on the initial

splash screen, in the code, on the storage

medium, on the packaging, in the “Help/

About” section, in the operator’s manual, and

in any displayed or printed map image, for

each Value Added Product that is based upon:

Tele Atlas^®MultiNet^®North America: As of

the Effective Date, the copyright notice is:

served. This material is proprietary and the

subject of copyright protection and other in-

tellectual property rights owned or licensed

to Tele Atlas. Tele Atlas is an authorized dis-

tributor of selected Statistics Canada com-

puter files under Agreement number 6776.

The product includes information copied

with permission from Canadian authorities,

including © Canada Post Corporation, Geo-

Base^®, and Department of Natural Re-

product is sourced in part from Geography

Division, Statistics Canada, 2008 Road Net-

work File (RNF), 92-500-XWE/XWF. The in-

corporation of data sources from Statistics

Canada within this product shall not be

construed as constituting an endorsement

by Statistics Canada of such product. The

use of this material is subject to the terms

of a License Agreement. You will be held li-

able for any unauthorized copying or disclo-

sure of this material.”

10 Additional Provisions with respect to

Tele Atlas^®3D Landmarks Licensed Tele

Atlas Product (the “3D Landmarks”):

(The following provisions only refer to the pro-

ducts which contain Tele Atlas^®3D Landmarks

Licensed Tele Atlas Product.)

Licensee agrees to include as soon as practi-

cally possible, but no later than the first new

release of the Value Added Product following

Licensee’s receipt of any 3D Landmarks, any

landmarks on every Value Added Product and

in the “about box” of the Value Added Product.

Notwithstanding the aforementioned, Tele

Atlas has the right to decide, at its sole discre-

tion, to remove specific 3D Landmarks in sub-

sequent releases of the Licensed Tele Atlas

Products. In such case, Licensee will remove

those 3D Landmarks from the Value Added

Product as soon as practically possible, but

not later than the first new release of the Value

Added Product following Licensee’s receipt of

the Update to the Licensed Tele Atlas Product.

Tele Atlas shall not be held responsible for any

possible damages, costs or expenses incurred

by Licensee related to such removal of a 3D

Landmark by Tele Atlas from the Licensed Tele

Atlas Product or failure to remove a 3D Land-

mark by Licensee from the Value Added Pro-

duct.

Tele Atlas^®MultiNet^®Mexico: As of the Ef-

fective Date, the copyright notice is: “©

This material is proprietary and the subject

of copyright protection and other intellec-

tual property rights owned or licensed to

Tele Atlas. The use of this material is sub-

ject to the terms of a license agreement.

You will be held liable for any unauthorized

copying of disclosure of this material.”

11 Copyright Notices.

Licensee shall conspicuously display each ap-

plicable then current copyright notice for the

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

12 Miscellaneous.

This is the exclusive and complete Agreement

between the Licensors and you regarding its

subject matter. Nothing in this Agreement

shall create a joint venture, partnership or

principal-agent relationship between the Li-

censors and you. Sections 2, 5 and 7 - 11 shall

survive the expiration or termination of this

Agreement. This Agreement may be amended,

altered, or modified only by PIONEER. You

may not assign any part of this Agreement

without PIONEER’ prior written consent. You

acknowledge and understand that the Data

may be subject to restrictions on exportation

and agree to comply with any applicable ex-

port laws. In the event that any provision or

part of a provision of this Agreement is deter-

mined to be invalid, illegal, or unenforceable,

such provision or part thereof shall be stricken

from this Agreement and the remainder of this

Agreement shall be valid, legal, and enforce-

able to the maximum extent possible. Any no-

tice under this Agreement shall be delivered

by courier to PIONEER, Attention Legal

Department.

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

Licenses

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

Download from Www.Somanuals.com. All Manuals Search And Download.

License agreement

Download from Www.Somanuals.com. All Manuals Search And Download.

About the database

About the data for the map

database

Modifications related to roads, streets/high-

ways, terrain, construction and other things

before/during the development period may

not be reflected in this database. Inevitably,

those modifications after that period are

not reflected in this database.

Regardless of existing and newly-built

things, the data may be different from the

actual condition.

For details about the map coverage of this

navigation system, refer to the information

on our website.

It is strictly prohibited to reproduce and use

any part or the whole of this map in any

form without permission from the copyright

owner.

If the local traffic regulations or conditions

deviate from this data, follow the local traf-

fic regulations (such as signs, indications,

etc.) and conditions (such as construction,

weather, etc.).

The traffic regulation data used in the map

database applies only to standard sized

passenger vehicles. Note that regulations

for larger vehicles, motorbikes, and other

non-standard vehicles are not included in

the database.

Map Version, Tele Atlas. Rel. 09/2009.

Icons for XM Satellite Radio

The icon of each broadcast station is con-

tained in the hard disk drive based on the data

provided by XM Satellite Radio as of Septem-

ber 2009.

Any changes made by XM Satellite Radio in

the lineup or icon of the broadcast station in

the future may not be supported by the naviga-

tion system, and may cause the unit to display

incorrect icons.

Download from Www.Somanuals.com. All Manuals Search And Download.

Instructions for upgrading

The navigation system

upgrade process

Preparation for upgrade

Checking the device number

First, check your device number

1 Check the device number of your naviga-

tion system.

(DEVICE NUMBER, displayed such as

Device # or Device Number) of your naviga-

tion system for later procedures. To display the

device number, do the following.

= For details of the operation, refer to

Checking the device number on this

page.

Press the HOME button to display the

“Top Menu” screen.

2 Get the password for authentication.

= For details, refer to Getting the password

for authentication on this page.

Touch [Settings].

The “Settings Menu” screen appears.

Touch [System Settings].

The “System Settings” screen appears.

3 Upgrade the software program of your navi-

gation system.

Touch [Service Information].

= For details of the operation, refer to Up-

grading the software program and the

map database on the next page.

The “Service Information Screen” screen ap-

pears.

Write down your device number

(Device Number) onto the supplied Media

Number Card (MEDIA NUMBER CARD) to

avoid mistakes.

4 Check whether the upgrade was done prop-

erly.

= For details of the operation, refer to

Checking whether the upgrade was done

properly on page 23.

p Also write down “Version” information

which would be used to confirm completion

of the update.

Getting the password for

authentication

For upgrade, an unique password issued on-

line is necessary. Access the website with your

PC and get your password.

5 Update the Bluetooth firmware.

= For details of the operation, refer to Up-

dating the Bluetooth wireless technology

software on page 23.

The following information is required.

Media Number (MEDIA NUMBER) printed

on supplied Media Number Card

(MEDIA NUMBER CARD)

Device Number (DEVICE NUMBER) of your

navigation system

p If you don’t have the web-connected com-

puter for the online issuance of password,

please contact your Authorized Pioneer

Electronics retailer or call the companies

listed at “After-sales service for Pioneer pro-

ducts”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Instructions for upgrading

Access on the following website to

Touch [Yes].

issue your password.

http://www.pioneernavigationupdate.com

In Canada:

http://www.pioneernavigationupdate.ca

For issuing the password, follow the instruc-

tion on the website.

Record the password that you received.

You need to input this password accurately.

Write down your password to avoid mis-

takes.

The message confirming whether or not to

enter the password will appear.

Touch [Yes].

Upgrade procedures

NEVER stop the engine of your vehicle or

turn off the power supply to the navigation

system until the installation is completed.

Turning the power off during upgrade pro-

cess causes a malfunction or failure of the

navigation system.

After a short pause, the keyboard for entering

the password will appear.

No functions are available during upgrade

process.

Touch [No].

Shows the device number (Device #) of your navi-

gation system.

Upgrading the software

program and the map database

Touch [Cancel].

Cancels the update.

This section describes the upgrade proce-

dures for your navigation system.

p The upgrade takes approximately 30 min-

utes in total.

Enter the password for authentication

that you obtained, then touch [OK].

Park your vehicle in a safe place and

apply the parking brake.

Insert the upgrade SD memory card #1

into the SD card slot.

The message confirming whether or not to

start the update will appear.

A message confirming whether to restart the

navigation system appears.

Touch [OK].

The navigation system restarts and then the in-

stallation begins.

Download from Www.Somanuals.com. All Manuals Search And Download.

Instructions for upgrading

Wait until the upgrade process is com-

Updating the Bluetooth

wireless technology software

plete.

Access the Pioneer website to check your

phone’s compatibility. If your phone is on the

list and you wish to update, manually update

the Bluetooth firmware after the automatic up-

grade is finished.

In Canada

CAUTION

Be sure to upgrade your navigation system

first.

Be careful to follow the update procedure cor-

rectly. If you make a mistake, Bluetooth wire-

less technology functions will become

unavailable.

After the installation is complete, the naviga-

tion system restarts.

p Consult your authorized dealer if you are

unable to use Bluetooth wireless technol-

ogy functions.

Be sure to complete the Bluetooth firmware

update procedure without interruption.

Checking whether the upgrade

was done properly

Display “Service Information Screen” screen

to compare the current version number with

the previous one.

p Registered phones that are listed on the

“Connection List” screen are cleared by

the software update.

Press the HOME button to display the

Insert the upgrade SD memory card #1

“Top Menu” screen.

into the SD card slot.

Touch [Settings].

Press the HOME button to display the

The “Settings Menu” screen appears.

“Top Menu” screen.

Touch [System Settings].

Touch [Settings].

The “System Settings” screen appears.

The “Settings Menu” screen appears.

Touch [Service Information].

Touch [Bluetooth Settings].

The “Service Information Screen” screen ap-

pears.

The “Bluetooth Settings” screen appears.

Touch [Firmware update].

Check the version information.

The current version is displayed.

Confirm the Bluetooth firmware ver-

sion.

Make sure that the current version is 2.50.

Download from Www.Somanuals.com. All Manuals Search And Download.

Instructions for upgrading

Touch [Firmware update].

16 If the current version is 3.10, touch

[Firmware update].

The message confirming whether or not to

start the update will appear.

p If the current version is 2.50, return to step

The message confirming whether or not to

start the update will appear.

Make sure that the current Bluetooth

firmware version is 2.50 and the new Blue-

tooth firmware version is 3.10.

17 Make sure that the current Bluetooth

firmware version is 3.10 and the new Blue-

tooth firmware version is 3.11.

Touch [Yes].

Update starts.

10 Wait until the upgrade process is com-

plete.

A message will appear after the update is

complete.

18 Touch [Yes].

Update starts.

19 Wait until the upgrade process is com-

plete.

11 Touch [OK].

The message disappears, and the map screen

returns.

A message will appear after the update is

complete.

20 Touch [OK].

The message disappears, and the map screen

returns.

12 Eject the upgrade SD memory card #1.

13 Insert the upgrade SD memory card #2

into the SD card slot.

21 Eject the upgrade SD memory card #2.

Update is completed.

14 Repeat steps 2 through 5.

15 Confirm the Bluetooth firmware ver-

sion.

Make sure that the current version is 3.10.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changes on the upgraded program

Displaying check marks on

the “Overlay POI (Main

Category)” screen

A check mark appears next to the main cate-

By upgrading AVIC-Z110BTwith this product,

functions and operations will be equivalent to

AVIC-Z120BT. Therefore, obtain the Operation

Manual for AVIC-Z120BT and use it as your pri-

mary reference.

gory containing the selected sub-category.

In Canada

AV functions

The AV source screen design and operation

procedure will be changed.

p Refer to this manual for DVD-VR operation

procedures.

If you upgrade your navigation system using

this SD memory card, the system will have the

following changes.

= For details of the operation, refer to Playing

a DVD-VR disc on the next page.

Eco-driving function

The Eco-driving functions are an estimate

of the real time fuel consumption to aver-

age fuel consumption ratio and is not an

actual value.

The Eco-driving functions and calculations

take into consideration the location of the

GPS position and speed of the vehicle in de-

termining a value.

Indications of the navigation system may

be different from the actual value.

Some of the features of the navigation sys-

tem do not take in to consideration the type

of vehicle it is installed into.

Switching the playback of

the voice recognition beep

You will be able to make settings to turn on

and off the beep sound that plays when voice

recognition starts.

p This setting is available on the “Volume

Settings” screen.

Setting the illumination color

“Memory 3” will be changed to “Eco”.

Upgrading enables the Eco-driving function,

which supports environmentally-friendly driv-

ing.

Displaying Eco-Meter on the map

Displaying “Eco Graph”

Displaying Eco Drive Level guidance

Sudden start alert

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a DVD-VR disc

Shows the audio track number currently se-

lected.

You can play a DVD-VR (DVD Video Recording

Format) disc using the built-in drive of the na-

vigation system. This section describes opera-

tions for DVD-VR discs.

3 Chapter number indicator

Shows the chapter number currently playing.

4 Audio channel indicator

Shows the current audio channel type, such

as “Mch” (Multi-channel).

Starting procedure

5 Play mode indicator

Press the MODE button to display the

Shows the current play mode.

= For details, refer to Switching the play-

back mode on page 29.

AV operation screen.

Insert the disc you want to play into

6 Mixing condition indicator

Shows the current mixing condition.

= For details, refer to Selects audio out-

put on page 30.

disc-loading slot.

The source changes and then playback will

start.

p If the disc is already set, tap [Disc] on the

7 Current time

left edge of the screen.

8 Digital sound format indicator

Shows which digital sound format (surround

sound format) has been selected.

9 Play time indicator

Shows the elapsed playing time within the

current title.

a Source icon

Shows which source has been selected.

Use the touch panel keys on the screen

to control the disc.

= For details, refer to Using the touch panel

keys on the next page.

Reading the screen

1 2 3 4

1 Title number indicator

Shows the title number currently playing.

2 Audio track indicator

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a DVD-VR disc

Using the touch panel keys

Playback screen (page 1)

Playback screen (page 2)

p With some discs, the icon 9 may be dis-

played, meaning that the operation is inva-

lid.

Touching [p] skips to the start of the next

chapter. Touching [o] once skips to the

start of the current chapter. Touching it twice

quickly will skip to the previous chapter.

p You can also perform these operations

by using the TRK (c/d) button.

1 c CM Skip/CM Skip d

= For details, refer to Using the short-time

skip function on page 29.

2 Switches the playback mode

= For details, refer to Switching the play-

back mode on page 29.

6 Playback and Pause

Touching [f] switches between playback

and pause.

3 Stops playback

7 Displays the title list

4 Hides the touch panel keys and informa-

tion of the current video

Touching [Hide] shows only the current video.

To display the touch panel keys and informa-

tion of the current video, touch the screen.

5 Skips forward or backward

Displays the title list recorded on the disc.

p A dash (–) is displayed if there is no cor-

responding information.

= For details, refer to Playing by selecting

from the title list on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a DVD-VR disc

8 Switches to the next page of touch panel

keys

= For details, refer to Slow motion playback

on the next page.

9 Switches the display

Touching [Disp] changes the information as

follows:

Disc information display — Repeat range dis-

play and on-off state of the subtitle

a Recalls equalizer curves

Playing by selecting from the

title list

You can select and play the title you want from

the list.

= For detailed operations, refer to the Op-

eration Manual for AVIC-Z120BT.

b Displays the “Function” menu

= For details, refer to Using the

“Function ” menu on page 30.

c Searches for a desired scene and starts

playback from a specified time

= For details, refer to Searching for a speci-

fic scene and starting playback from a

specified time on this page.

Touch [List] on the playback screen.

Scroll by dragging items up or down,

and display the item you want to select.

p Flicking a list item enables you to quickly

scroll through the list.

p To stop scrolling, gently touch the list.

Touch the title to play from the list.

d Changes audio tracks (Multi-audio)

Each touch of [Audio] switches between

audio tracks.

p Display indications such as MPEG-A

and Mch describe the audio track re-

corded on the DVD. This indication may

not be the same as the actual sound

currently output from the navigation sys-

tem.

Touch the key on the right edge of the

screen.

e Changes the subtitle (Multi-subtitle)

Each touch of [S.Title] switches between the

subtitle languages recorded on the disc.

f Skips the title forward or backward

Touching [d] skips to the start of the next title.

Touching [c] skips to the start of the previous

title.

g Fast reverse or forward

Touch [m] or [n] to perform fast reverse or

forward.

The previous screen returns.

If you touch and hold [m] or [n] for five

seconds, fast reverse/fast forward continues

even if you release either of these keys. To re-

sume playback at a desired point, touch

[f], [m] or [n] opposite to key pushed

for five seconds.

Searching for a specific scene

and starting playback from a

specified time

You can search for the scene you want by spe-

cifying a title or a chapter, and the time.

h Frame-by-frame playback (or slow-motion

playback)

= For details, refer to Frame-by-frame play-

back on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a DVD-VR disc

p Chapter search and time search are not

available when disc playback has been

stopped.

Using the short-time skip function

This function enables you to skip over your

specified interval on the video playback. This

is useful to skip commercials on your recorded

DVD-VR disc.

Touch [Search] and then touch [Title]

(title), [Chapter] (chapter), [Time] (time).

To skip progressively backward or for-

Touch the keys to input the target num-

ward, touch [c CM Skip] or [CM Skip d].

Each touch of [c CM Skip] or [CM Skip d]

changes steps in the following order:

c CM Skip

ber or time and then touch [Enter].

5 sec. — 15 sec. — 30 sec. — 1 min. — 2 min.

— 3 min. — 0 sec.

CM Skip d

30 sec. — 1 min. — 1.5 min. — 2 min. — 3 min.

— 5 min. — 10 min. — 0 sec.

For titles, chapters

To select 3, touch [3] and [Enter] in order.

To select 10, touch [1] and [0] and [Enter] in

order.

Frame-by-frame playback

This lets you move ahead one frame at a time

during playback.

For time (time search)

To select 5 minutes 3 seconds, touch [5],

[min], [3], [sec] and [Enter] in order.

To select 71 minutes 00 seconds, touch [7],

[1], [min] and [Enter] in order.

To select 100 minutes 05 seconds, touch

[1], [0], [0], [5], [sec] and [Enter] in order.

Touch [r] during playback.

Each time you touch [r], you move ahead

one frame.

To return to normal playback, touch [f].

p With some discs, images may be unclear

during frame-by-frame playback.

p To cancel an input number, touch [Clear].

To cancel the input numbers, touch and

hold [Clear].

Slow motion playback

This lets you slow down playback speed.

Touch and hold [r] until

played during playback.

The icon is displayed, and forward slow

is dis-

Switching the playback mode

You have two methods for playing DVD-VR

discs; Original (original) and Playlist (play-

list).

p Titles created with DVD recorders are

called original. Those based on original, re-

arranged titles are called playlist. Playlists

are created on DVD-R/-RW discs.

motion playback begins.

p To return to normal playback, touch [f].

Touch [q] or [r] to adjust playback

speed during slow motion playback.

Each time you touch [q] or [r] it changes

the speed in four steps in the following order:

1/16 f 1/8 f 1/4 f 1/2

Touch [Mode Change] to switch the

play mode.

If the play mode is changed, playback starts

from the beginning of the selected play mode.

p There is no sound during slow motion play-

back.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a DVD-VR disc

p With some discs, images may be unclear

during slow motion playback.

p Reversed slow motion playback is not possi-

ble.

3 DVD setup adjustments

= For detailed operations, refer to the Op-

eration Manual for AVIC-Z120BT.

Using the “Function” menu

Touch on the “DVD-VR” screen.

The “Function” menu appears.

1 Changes the repeat range

Each touch of [Repeat] changes the setting

as follows:

Disc: Plays throughout the current disc.

Chapter: Repeats just the current chap-

ter.

Title: Repeats just the current title.

p If you perform chapter (title) search, fast

forward, fast reverse or slow motion

playback, the repeat play range changes

to “Disc”.

p This function is not available when disc

playback has been stopped.

2 Selects audio output

When playing DVDs that both channels are

recorded in monaural, you can switch the

audio output. Touch [L/R Select] repeatedly

until the desired audio output appears in

the display.

Each touch of [L/R Select] changes the set-

tings as follows:

L: Left

R: Right

Mix: Mixing left and right

L+R: Left and right

p This function is not available when disc

playback has been stopped.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Problems in the procedures for updating

Symptom

Cause

Action

The upgrade process doesn’t

start and the navigation system been inserted.

boots up as usual.

An incorrect SD memory card has

Eject the inserted SD memory card and insert

the correct upgrade SD memory card.

Upgrade has been already done.

Check whether the upgrade was done prop-

erly. If the upgrade has not been done yet,

consult the nearest authorized service sta-

tion.

The screen that cannot begin the

upgrade process is displayed.

Eject the upgrade SD memory card #1, and

display the map of your current position, and

then reinsert the upgrade SD memory card

#1.

The navigation system does not The engine of your vehicle was

Consult the nearest authorized service sta-

work properly after upgrade.

stopped or the power supply to the tion.

navigation system was turned off

during upgrade process.

Upgrade SD memory card was

Consult the nearest authorized service sta-

pulled out during upgrade process. tion.

Messages in the procedures for updating

The following messages may be displayed by your navigation system. Refer to the table below to

identify the problem, then take the suggested corrective action.

There are occasions when you may see error messages other than those shown here. In such a

case, follow the instructions given on the display.

Message

An error occurred and the up- Unexpected error occurred in the

date failed. update process.

When

What to do

Consult your local Pioneer dealer if this mes-

sage persist.

Download from Www.Somanuals.com. All Manuals Search And Download.

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,

Kanagawa 212-0031, JAPAN

(

)

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique

TEL: (0) 3/570.05.11

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada

TEL: 1-877-283-5901

TEL: 905-479-4411

Blvd.Manuel Avila Camacho 138 10 piso

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

先鋒股份有限公司

總公司 : 台北市中山北路二段44號13樓

電話 : (02) 2521-3588

先鋒電子（香港）有限公司

香港九龍尖沙咀海港城世界商業中心9樓901-6室

電話 : (0852) 2848-6488

Published by Pioneer Corporation.

<CRB3480-A> UC

Download from Www.Somanuals.com. All Manuals Search And Download.

Philips Hot Beverage Maker HD4626 User Manual
Philips MP3 Docking Station DLA77082 79 User Manual
Philips MP3 Player SA6125 97 User Manual
Philips Portable DVD Player PET716 12 User Manual
Philips Telephone C244 User Manual
Philips TV DVD Combo DVDR3460 User Manual
Pioneer Flat Panel Television PDP 425CMX User Manual
Poulan Snow Blower 192042 User Manual
Poulan Snow Blower PR8527ES User Manual
Powermatic Welder PF 31 User Manual