User Manual
PIEGA P SUB 4 Active-Subwoofer
Version 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
User Manual
PIEGA P SUB 4
This user manual describes how to connect the PIEGA P SUB 4 active subwoofer to different loudspeaker configurations and the
appropriate setting options for optimum operation in stereo and home cinema mode. It also contains instructions for unpacking and
setting up the P SUB 4.
4 Precautions
Before unpacking...
5 Unpacking the P SUB 4
Instructions for unpacking...
6 Installation Instructions
Recommendations for ideal positioning...
7 Connection Options
Connection terminal for different applications...
8 Connecting the System
Configuration examples for stereo and surround mode*...
13 Setting the Sound Characteristics
Setting options for individual requirements...
14 Daily Use
Care and maintenance...
15 Warranty Conditions
Service and warranty conditions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Before unpacking...
PIEGA P SUB 4
Please read this user manual carefully and pay special attention to the following precautions and warnings. In your own interest, we
advise you to strictly observe the following procedure when installing your new PIEGA P SUB 4.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK DO NOT EXPOSE
THISAPPLICATE TO RAIN OR MOISTURE
Warning:
>The PIEGA P SUB 4 subwoofer has been designed
for use with PIEGA loudspeaker products. Nevertheless, the
subwoofer can also be operated with the loudspeakers
CAUTION
RISK OF ELECTRIC SHOCK
!
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
of other suppliers
DOUBLE INSULATION WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS
>Ensure particularly that the P SUB 4 is installed
and connected in accordance with the instructions of this
user manual
CONFORMS TO
UL STD. 6500
>The P SUB 4 was only designed for use in dry residential
CERTIFIED TO
CAN/CSASTD. E60065
environments within a temperature range of 10...40°C
C
US
2001310
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking the P SUB 4
Instructions for unpacking...
PIEGA P SUB 4
Special care was taken in the packaging of your P SUB 4 in order to ensure that this new PIEGA quality product reaches your living
room safely and undamaged. In order to avoid any damage when unpacking the loudspeaker, follow closely the instructions below.
Procedure:
>Before unpacking, remove any jewelry such as watches, rings,
bracelets etc. in order to avoid scratching the aluminum
>Open the carton as shown in the figure and remove the supply
cable and spikes provided. Leave the protective cushion
>Carefully invert the subwoofer 180° with the carton open and
stand it on the protective cushion so that the carton can be
lifted up and off the loudspeaker
>Remove the protective foil and the upper protective cushion
and by hand fit the spikes supplied
>Turn the subwoofer over 180° once more and stand it on
the spikes. To ensure trouble-free operation of the P SUB 4
the spikes must be screwed in...!
>Check that the P SUB 4 has not been damaged in transit.
>Then place the P SUB 4 in the required position
Warning:
The P SUB 4 subwoofer is an active subwoofer with a bass reflex system.
>Ensure that the bass reflex port is not blocked...!
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Recommendations for ideal positioning...
PIEGA P SUB 4
The P SUB 4 can be installed flexibly and easily. Due to its relatively small size, it can be integrated in any unit and can be positioned
as required virtually anywhere in the room. However, to ensure the most natural sound, the P SUB 4 should be placed on the floor
near the two front loudspeakers.
Ideal setup:
>For both surround and stereo mode, position the P SUB 4
as close to the two front loudspeakers as possible
>The bass chassis of the P SUB 4 should face the front,
with the connection terminal facing the wall
Surround mode
>Only a small clearance from the wall is required (approx. 30 cm)
for this configuration as the sound is directed forward from the
chassis
>Do not in any way prevent the free movement of the P SUB 4
>Do not place any objects such as vases etc. on the P SUB 4
so as avoid the possibility of accidents
Stereo mode
Note:
Frequencies below 100 Hz cannot be localized by the human ear.
>The exact positioning of the P SUB 4 is largely unnecessary...!
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Options
Connection terminal for different applications...
PIEGA P SUB 4
Its large range of connection options offers the P SUB 4 a large number of configurations both for stereo and for surround mode.
Refer to the appropriate user manual supplied for specific information on the loudspeakers used and components of your stereo or
surround system.
Note:
LFE / IN
R
L
>The connection terminal of the P SUB 4 allows a number
of possible configuration options for stereo and surround mode
OUTPUT
INPUT
>Depending on the equipment in use, select the appropriate
configuration (see the following pages)
>The LFE/IN, INPUT, OUTPUT terminals for connecting to the
AV receiver or the stereo amplifier require connection cables with
cinch plugs
HI LEVEL INPUT
>The HIGH LEVEL INPUT and HIGH LEVEL OUTPUT terminals
for connecting amplified music signals can be connected to
loudspeaker cables with or without banana plugs
HI LEVEL OUTPUT
Connecting the supply cable:
>Check whether the default switch position (230/115 V) of your
P SUB 4 corresponds to the standard supply voltage in
your country
POWER
ON
>Plug the supply cable provided with the loudspeakers
into the appropriate socket
OFF
>Do not switch on the P SUB 4 (POWER ON) until all cable
connections have been made
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the System
Configuration example for surround mode
PIEGA P SUB 4
This connection configuration for 5.1 surround applications uses an AV receiver with a separate subwoofer output. Since the AV
receiver handles the bass management in this configuration, the settings for each loudspeaker can be adjusted individually via the
menu. Note that in this case, the LOW PASS setting of the P SUB 4 has no effect (see page 13). Refer to the user manual of your AV
receiver for information on the individual setup controls.
Dolby Digital System - Surround System with AV Receiver
Center
Speaker
Connection:
Rear
Speaker R
Rear
Speaker L
>Connect the P SUB 4 cable to the terminal
marked SUBWOOFER (or similar) on the AV receiver
>Connect the P SUB 4 cable to the terminal on the
subwoofer marked LFE/IN
Front
Speaker R
Front
Speaker L
>For this use a suitable connection cable with
cinch plugs (not supplied with the loudspeakers)
Front
R
Center
Front
L
Rear
R
Rear
L
L
Subwoofer
R
>Connect the front, rear and center loudspeakers using the
loudspeaker terminals provided on your AV receiver
Amplifier
>Setting tip: Turn the LOW PASS knob up full and the VOLUME
knob to just over half way
PHASE
LFE / IN
R
L
OUTPUT
LINE
Benefit:
INPUT
The most frequently used and ideal
connection configuration for 5.1 surround mode
>The P SUB 4 can be tuned for optimum results...!
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the System
Configuration example for stereo and surround mode
PIEGA P SUB 4
The 5.1 receivers and power amplifiers of some manufacturers have a separate NF Out socket for connecting a subwoofer. This
enables the signal to reach the subwoofer without any amplification. Refer to the appropriate manual for information about operation
and connection options for your AV receiver/power amplifier.
Dolby Digital System - Surround System with NF Out
Center
Speaker
Connection:
Rear
Speaker R
Rear
Speaker L
>Connect the P SUB 4 cable to the AV receiver
terminal marked PRE OUT (or similar)
Front
Speaker R
Front
Speaker L
>Connect the P SUB 4 cable to the subwoofer
terminal marked INPUT
Right
Left
R
L
T3. 15AL250V FOR 230V INPUT
T5AL250V FOR 115V INPUT
115/230V - 50/60HZ 500W
230V
>For this use connection cables with cinch plugs (not supplied)
PRE OUT
Amplifier
>Connect the loudspeakers using the loudspeaker terminals
provided on your AV receiver/power amplifier
LFE / IN
R
L
OUTPUT
INPUT
LINE
Note:
Frequently used configuration
>Ideal configuration for stereo mode...!
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the System
Configuration example for stereo mode
PIEGA P SUB 4
The power amplifiers of some manufacturers feature separate MAIN IN and PRE OUT terminals, allowing the preamplified signal to
reach the subwoofer and to be looped back again filtered. In this way the loudspeakers are relieved in the deep range, thus gaining
in precision and sound characteristics (see page 13). Refer to the appropriate manual for information about operation and connection
options for your power amplifier.
Stereo System with power amplifier featuring MAIN IN/PRE OUT loop
Connection:
>Connect the P SUB 4 cable to the amplifier terminal marked
Front
Speaker R
Front
Speaker L
PRE OUT (or similar) and to the subwoofer terminal marked INPUT
Right
Left
L
R
>Connect the P SUB 4 cable to the amplifier terminal marked
MAIN IN PRE OUT
Amplifier
MAIN IN (or similar) and to the subwoofer terminal marked OUTPUT
>For this use two connection cables with cinch plugs
(not supplied with the loudspeakers)
>Connect the front, rear and center loudspeakers using the
loudspeaker terminals provided on your AV receiver
OUTPUT
INPUT
LINE
R
L
Benefit:
Preferred configuration in the high end range
>The loudspeakers are relieved in the deep bass range...!
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the System
Configuration example for stereo mode
PIEGA P SUB 4
This is a widely used configuration for stereo mode, although it is not recommended for surround mode since there is a risk of
overloading with small satellite loudspeakers. With this configuration, the connection is made to the amplifier. Refer to the appropriate
manual for information about operation and connection options for your power amplifier.
Subwoofer mode via loudspeaker terminals
Connection:
>Connect the P SUB 4 MKII cable to the amplifier terminal
marked SPEAKER (or similar)
Front
Speaker R
Front
Speaker L
>Likewise connect up the loudspeakers (parallel) to the terminal
marked SPEAKER (or similar)
Amplifier
>For this use two similar connection cables (not supplied)
HI LEVEL INPUT
Benefit:
Frequently used configuration in stereo mode
>Flexible positioning of components...!
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the System
Configuration example for stereo mode
PIEGA P SUB 4
Commonly used configuration in stereo mode with the loudspeakers (parallel) connected to the subwoofer. Refer to the appropriate
manual for information about operation and connection options for your stereo amplifier.
Loudspeaker terminals on the subwoofer
Connection:
Front
R
Rear
R
Center
Rear
L
Front
L
POWER
ON
L
230V
R
OFF
T3. 15AL250V FOR 230V INPUT
T5AL250V FOR 115V INPUT
115/230V - 50/60HZ 500W
>Connect the P SUB 4 subwoofer cable to your stereo
amplifier at the terminal marked SPEAKER (or similar)
Amplifier
>Connect up the loudspeakers parallel to the subwoofer
>For this use suitable loudspeaker cables, if necessary with
banana plugs (not supplied)
HI LEVEL INPUT
HI LEVEL OUTPUT
Benefit:
Frequently used configuration in stereo mode
>Simple and durable cabling...!
Speaker R
Speaker L
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings of the Sound Characteristics
Setting options for individual requirements...
PIEGA P SUB 4
Thanks to the use of the most advanced active electronics, your new P SUB 4 is a cutting edge product in the field of subwoofers. The
connection and setting options provided on the P SUB 4 allow the best possible connection to your stereo or surround sound system
and can be adapted to your individual audio requirements.
LEVEL
LEVEL
>Use this knob to adjust the subwoofer volume
MIN.
MAX.
Setting tip: Turn the subwoofer to maximum volume and then turn it
down until it sounds too quiet for you
LED
>The LED is off when the loudspeaker is switched off, and is red when it is in
standby mode. When the subwoofer is in operation the LED is green to indicate
trouble-free operation
AUTO POWER
A
U
T
O
POWER
>Use this switch to activate the standby function of the P SUB 4.
This enables the subwoofer to switch on automatically as soon as a signal
is received and to switch off when there is no more signal. When the AUTO
POWER switch is in the OFF position, the subwoofer stays permanently
switched on >>Factory setting ON
LOW PASS
L
O
W
PA
SS
>Use this knob to set the crossover frequency between subwoofer and full-
range speaker according to the connection method* used.
This will relieve the satellite loudspeakers in the bass range
>>Factory setting 80 – 100 Hz
PHASE-SWITCH
PHASE
>Use this switch to set the subwoofer to In Phase or Out of Phase.
Depending on the type of loudspeaker, there will be a phase cancelling
(little bass) or a phase correction (normal bass)
>>Factory setting 0
* LOW PASS is not active when the P SUB 4 is connected to an AV receiver as described on page 8
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Use
Care and maintenance
PIEGA P SUB 4
From development to production, right down to quality testing, PIEGA only uses materials and components of the highest quality. Your
new P SUB 4 has a polished aluminum surface. As this material is very sensitive, it should be treated with due care.
Procedure:
>Clean the surface of the P SUB 4 with a soft, fluff-free cloth
>If necessary, the P SUB 4 can be cleaned with a vacuum
cleaner set to the lowest power setting
>Never use alcohol or other cleaning agents to clean
your P SUB 4
>If necessary, use a damp cloth with a solution
of lukewarm water and a few drops of washing up liquid
Warning:
On no account open the cabinet of the P SUB 4
>Electronic components carry a dangerous high voltage...!
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Conditions
Service- and warranty conditions
PIEGA P SUB 4
The warranty is limited to six years on our loudspeakers and three years on our electronics in accordance with the conditions stated
below. Read through the service and warranty conditions carefully, especially the warnings concerning the purchase of PIEGA
loudspeakers from unauthorized dealers.
Warranty conditions
1.
2.
Every Piega device leaves the factory in perfect condition. If any manufacturing and/or material defects are
found during normal use of the device, we warrant to repair the device with free parts and labor during the
first six years from the date of purchase.
The registration card for the device must be sent to Piega within six weeks of purchase or registered via the
3.
4.
The product must have been purchased at an authorized Piega dealer.
The warranty will not be applicable if any repair is carried out by a person or a workshop that is not authorized
to do this by Piega.
5.
6.
If it is necessary for a device or part of it to be sent to Piega or an approved Piega workshop, the sender is
responsible for paying all transport costs in advance. The original packaging must be used for sending the
complete device.
The warranty will not be applicable if the serial number of the device has been modified, removed or made
illegible. It will also not apply if the device is not connected properly or not treated with due care. The warranty
will also not be applicable if the device was modified or repaired in any way that in our view has altered the
correct functioning of the device.
7.
Piega shall not be liable for the consequences of any damage.
PIEGA Loudspeaker products from unauthorized dealers
The official PIEGA warranty becomes invalid if a PIEGA loudspeaker product was purchased from an unauthorized dealer
and is therefore a gray market product, or if the original serial number has been intentionally removed, replaced or
made illegible. Should you have any doubt that the dealer you have selected is an officially authorized PIEGA dealer, we
recommend that you contact us or the PIEGA sales organization in your country without fail. Please note the PIEGA sales
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PIEGA SA
Bahnhofstrasse 29
CH-8810 Horgen, Switzerland
Tel.: +41 44 725 90 42
Fax: +41 44 725 91 92
Subject to modification, in particular technical modifications
All specifications without guarantee
CONFORMS TO
UL STD. 6500
CERTIFIED TO
CAN/CSA STD. E60065
Download from Www.Somanuals.com. All Manuals Search And Download.
|