Register your product and get support at
HTS3532
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
6
Update software
Check software version
Update software through USB
15
15
15
1
Important
2
Safety
2
3
3
3
Care for your product
Care of the environment
Help and support
7
8
9
Product specif cations
Troubleshooting
16
18
2
3
Your home theater
Main unit
Connectors
4
4
4
5
Notice
Copyright
Trademarks
19
19
19
Remote control
Connect and set up
Connect speakers
Connect toTV
Connect audio fromTV and other devices
Set up speakers
6
6
7
8
8
8
10 Index
20
Set up EasyLink (HDMI-CEC control)
4
Use your home theater
Discs
9
9
Data files
10
11
11
12
12
12
13
USB storage devices
Audio, video, and picture options
Radio
MP3 player
Create MP3 files
Choose sound
5
Change settings
Language settings
Picture and video settings
Audio settings
Parental control settings
Display settings
14
14
14
14
14
15
15
15
Energy saving settings
Restore default settings
EN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Never place the product or any objects
on power cords or on other electrical
equipment.
If the product is transported in temperatures
below 5°C, unpack the product and wait until
its temperature matches room temperature
before connecting it to the power outlet.
Visible and invisible laser radiation when
open.Avoid exposure to beam.
Do not touch the disc optical lens inside the
disc compartment.
Parts of this product can be made of glass.
Handle with care to avoid injury and damage.
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure to
follow instructions, the warranty does not apply.
•
•
•
Safety
Risk of electric shock or f re!
Risk of overheating!
•
•
Never expose the product and accessories to
rain or water. Never place liquid containers,
such as vases, near the product. If liquids are
spilt on or into the product, disconnect it
from the power outlet immediately. Contact
Philips Consumer Care to have the product
checked before use.
Never install this product in a confined space.
Always leave a space of at least four inches
around the product for ventilation. Ensure
curtains or other objects never cover the
ventilation slots on the product.
Risk of contamination!
•
Do not mix batteries (old and new or carbon
and alkaine, etc.).
Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
Remove batteries if they are exhausted or if
the remote control is not to be used for a
long time.
Batteries contain chemical substances, they
should be disposed of properly.
•
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
•
•
•
Never insert objects into the ventilation slots
or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
•
•
•
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord, always
pull the plug, never the cable.
Risk of swallowing batteries!
•
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach of
children at all times! If swallowed, the battery
can cause serious injury or death. Severe
internal burns can occur within two hours of
ingestion.
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after you
replace the battery.
Risk of short circuit or f re!
•
Before you connect the product to the
power outlet, ensure that the power voltage
matches the value printed on the back or
bottom of the product. Never connect the
product to the power outlet if the voltage is
different.
•
•
Risk of injury or damage to the home theater!
•
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper wall
mounting that results in accident, injury or
damage.
•
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
•
2
For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Care for your product
Help and support
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
Use only microfiber cloth to clean the
product.
Philips provides extensive online support.Visit our
•
•
•
download the complete user manual
print the quick start guide
watch video tutorials (available only for
selected models)
•
find answers to frequently answered
questions (FAQs)
•
•
•
email us a question
chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product model
number.
Alternatively, you can contact Philips Consumer
Care in your country. Before you contact Philips,
note down the model number and serial number
of your product.You can find this information on
the back or bottom of your product.
Care of the environment
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
a
(USB)
2 Your home theater
Audio, video or picture input from a USB
storage device.
b
MUSIC iLINK
Audio input from an MP3 player.
Congratulations on your purchase, and welcome
to Philips!To fully benefit from the support that
com/welcome.
Rear connectors
Main unit
This section includes an overview of the main unit.
a
AC MAINS
Connect to the power supply.
b
SPEAKERS
Connect to the supplied speakers and
subwoofer.
a
b
c
Disc compartment
Display panel
c
HDMI OUT
Connect to the HDMI input on theTV.
d
OPTICAL
(Open/Close)
Open or close the disc compartment, or
eject the disc.
Connect to an optical audio output on the
TV or a digital device.
e
f
VIDEO OUT
Connect to the composite video input on
theTV.
d
e
(Play/Pause)
Start, pause or resume play.
SOURCE
AUDIO IN-AUX
Connect to an analog audio output on theTV
or an analog device.
Select an audio or video source for the home
theater.
f
(Standby-On)
Switch the home theater on or to standby.
g
ANTENNA FM 75
Signal input from an antenna, cable or satellite.
Connectors
This section includes an overview of the
connectors available on your home theater.
Front connectors
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
b
c
(Open/Close)
Open or close the disc compartment, or
eject the disc.
Remote control
This section includes an overview of the remote
control.
Source buttons
•
DISC: Switch to disc source.Access or
exit the disc menu when you play a disc.
AUDIO SOURCE: Select an audio input
source.
RADIO: Switch to FM radio.
USB: Switch to USB storage device.
•
1
2
•
•
d
Navigation buttons
24
23
•
•
Navigate menus.
3
4
In video mode, press left or right to fast
backward or fast forward; press up or
down to slow forward or slow backward.
In radio mode, press left or right to
search a radio station; press up or down
to fine tune a radio frequency.
•
5
e
f
OK
Confirm an entry or selection.
22
21
6
BACK
Return to a previous menu screen.
7
8
g
/
(Previous/Next)
Skip to the previous or next track,
chapter or file.
•
•
20
19
In radio mode, select a preset radio station.
9
h
i
(Mute)
Mute or restore volume.
18
10
VOL +/-
Increase or decrease volume.
11
j
SOUND
Select a sound mode.
k
l
Numeric buttons
Select an item to play.
12
13
14
17
16
ANGLE
Select video scenes recorded in different
camera angels.
15
m
REPEAT / PROGRAM
•
Select or turn off repeat mode.
In radio mode, press once to access
program mode, and press again to store
the radio station.
•
a
(Standby-On)
•
In radio mode, press and hold for three
seconds to reinstall the radio stations.
•
•
Switch the home theater on or to standby.
When EasyLink is enabled, press and hold
for at least three seconds to switch all
connected HDMI CEC compliant devices
to standby.
n
REPEAT A-B
Mark two points within a chapter or track to
repeat play, or turn off the repeat mode.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
o
CREATE MP3/ZOOM
3 Connect and set up
•
•
Access the create MP3 menu.
Zoom into a video scene or picture.
Press the Navigation buttons (left/right)
to select a zoom factor.
This section helps you connect your home theater
to aTV and other devices, and then set it up.
For information about the basic connections of
your home theater and accessories, see the quick
start guide. For a comprehensive interactive guide,
p
q
r
SCREEN FIT
Fit the picture format to theTV screen.
SUBTITLE
Select subtitle language for video.
AUDIO SYNC
•
Select an audio language or channel.
Press and hold to access audio delay
setting, and then press the +/- or
Navigation buttons to delay the audio to
match the video.
Note
•
• For identification and supply ratings, see the type
plate at the back or bottom of the product.
• Before you make or change any connections,
make sure that all devices are disconnected from
the power outlet.
s
t
SURR
Select surround sound or stereo sound.
(Stop)
•
•
Stop play.
In radio mode, press and hold to erase
the current preset radio stations.
Connect speakers
u
v
(Play/Pause)
Start, pause or resume play.
The speaker cables are color-coded for easy
connection.To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
INFO
Access more play options while playing a disc
or a USB storage device.
Speaker position plays a critical role in setting up
a surround sound effect. For best effect, position
all the speakers towards the seating position and
place them close to your ear level (seated).
w
x
SETUP
Access or exit the setup menu.
SLEEP
Switch the home theater to standby mode
after the elapsed time.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Connect an audio cable to hear theTV audio
through your home theater (see 'Connect
audio fromTV and other devices' on page 8).
Note
• Surround sound depends on factors such as
room shape and size, type of wall and ceiling,
windows and reflective surfaces, and speaker
acoustics. Experiment with the speaker positions
to find the optimum setting for you.
•
When you watchTV programs, press
SOURCE on your home theater
repeatedly to select the correct audio input.
On yourTV, turn on HDMI-CEC operations.
For details, see theTV user manual.
Follow these general guidelines for speakers
placement.
Note
1
2
Seating position:
This is the center of your listening area.
• If yourTV has a DVI connector, you can use an
HDMI/DVI adapter to connect toTV. However,
some of the features may not be available.
FRONT CENTER (front center) speaker:
Place the center speaker directly in front of the
seating position, either above or below yourTV.
3
FRONT LEFT (front left) and FRONT
RIGHT (front right) speakers:
Place the left and right speakers in the front, and
at equal distance from the center speaker. Make
sure that the left, right, and the center speakers
are at equal distance from your seating position.
TV
4
5
REAR LEFT (rear left) and REAR RIGHT
(rear right) speakers:
Place the rear surround speakers to the left
and right side of your seating position, either
in line with it or slightly behind it.
SUBWOOFER (subwoofer):
Option 2: Connect to theTV through
composite video
Place the subwoofer at least one meter
to the left or right of theTV. Leave about
10-centimeter clearance from the wall.
Basic quality video
If yourTV does not have HDMI connectors, use
a composite video connection.A composite
connection does not support high-definition video.
Connect toTV
1
Using a composite video cable, connect the
VIDEO connector on your home theater to
the VIDEO IN connector on theTV.
Connect your home theater to aTV to watch
videos.You can listen to theTV audio through your
home theater speakers.
Use the best quality connection available on your
home theater andTV.
•
The composite video connector might
be labeled AV IN, COMPOSITE, or
BASEBAND.
2
3
4
Connect an audio cable to hear theTV audio
through your home theater (see 'Connect
audio fromTV and other devices' on page 8).
Option 1: Connect toTV through
standard HDMI
When you watchTV programs, press
SOURCE on your home theater repeatedly
to select the correct audio input.
Best quality video
Connect your home theater to theTV through a
standard HDMI connection.
When you watch videos, switch yourTV to
the correct video input. For details, see the
TV user manual.
1
Using a High Speed HDMI cable, connect
the HDMI OUT connector on your home
theater to the HDMI connector on theTV.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: Connect audio through analog
audio cables
TV
Basic quality audio
1
Using an analog cable, connect the AUX
connectors on your home theater to the
AUDIO OUT connectors on theTV or other
device.
VCR
Connect audio fromTV and
other devices
Play audio fromTV or other devices through your
home theater speakers.
Use the best quality connection available on your
TV, home theater, and other devices.
Note
Set up speakers
• The audio connections in this user manual
are only recommendations.You can use other
connections too.
Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in the
quick start guide, and then switch theTV to the
correct source for your home theater.
.
Option 1: Connect audio through a digital
optical cable
Best quality audio
1
Press SETUP on your home theater
remote control.
1
Using an optical cable, connect the OPTICAL
connector on your home theater to the
OPTICAL OUT connector on theTV or
other device.
2
3
Select [Audio Setup] and then press OK.
Press the Navigation buttons and OK to
select and change:
•
The digital optical connector might be
labeled SPDIF or SPDIF OUT.
•
[SpeakersVolume]: Set the volume level
of each speaker.
•
[Speakers Delay]: Set the delay time for
speakers which are placed closer to the
seating position in order to obtain equal
audio transmission from all the speakers.
TV
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Use your home
theater
Note
• Depending on the manufacturer, HDMI-CEC is
known by many names. For information on your
device, see the user manual of the device.
• Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
Before you start
•
Make the necessary connections described in
the quick start guide and the user manual.
Switch theTV to the correct source for your
home theater (for example, HDMI,AV IN).
•
Connect your home theater to the HDMI-CEC
compliant device through HDMI connection.
Make the necessary connections described in
the quick start guide, and then switch theTV
to the correct source for your home theater.
•
•
Enable EasyLink
Discs
1
2
3
Press SETUP.
Your home theater can play DVDs,VCDs, and
CDs. It can also play discs that you’ve made at
home, such as CD-R discs of photos and music.
Select [Video Setup] and then press OK.
Select [HDMI Setup] > [EasyLink Setup] >
[EasyLink] > [On].
1
2
Insert a disc into the home theater.
4
On yourTV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of theTV or other devices.
If the disc does not play automatically, press
DISC.
3
Use the remote control to control play (see
'Remote control' on page 5).
•
On yourTV, set the audio output to
'Amplifier' (instead ofTV speakers). For
details, see theTV user manual.
Play buttons
EasyLink controls
Button
Action
With EasyLink, you can control your home theater,
TV, and other connected HDMI-CEC compliant
devices with a single remote control.
Navigation
buttons
Navigate menus.
Up/Down: Flip the picture vertically
or horizontally.
Left/Right: Rotate the picture
clockwise or counter-clockwise.
•
[OneTouch Play] (One-touch play):When a
video disc is in the disc compartment, press
to wake up theTV from standby, and
then play a disc.
OK
Confirm an entry or selection.
•
[OneTouch Standby] (One-touch standby):
If one-touch standby is enabled, your home
theater can switch to standby with the
remote control of theTV or other HDMI-
CEC devices.
Start, pause or resume play.
(Play/
Pause)
Stop play.
Skip to the previous or next track,
chapter or file.
/
/
Fast backwards or fast forwards.
Press repeatedly to change the
search speed.
Note
• To change the EasyLink control settings, press
SETUP, select [Video Setup] > [HDMI Setup] >
[EasyLink Setup].
SUBTITLE
DISC
Select subtitle language for video.
Access or exit the disc menu.
AUDIO
SYNC
Select an audio language or
channel.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
SCREEN
FIT
Action
Subtitles
Fit the picture format to theTV
screen.
If your video has subtitles in multiple languages,
select a subtitle language.
ZOOM
Zoom into a video scene or
picture.
Note
REPEAT
Select or turn off repeat mode.
REPEAT
A-B
Mark two points within a chapter
or track to repeat play, or turn off
the repeat mode.
• Make sure that the subtitle file has the exact
same name as the video file. For example, if the
video file is named 'movie.avi', name the subtitle
file as 'movie.srt' or 'movie.sub'.
• Your home theater supports the following file
formats: .srt, .sub, .txt, .ssa, .ass, smi, and .sami. If
the subtitles do not appear correctly, change the
character set.
ANGLE
INFO
Select video scenes recorded in
different camera angels.
Access the advanced options when
you play your audio, video, or
media files (see 'Audio, video, and
picture options' on page 11).
1
2
While playing video, press SUBTITLE to
select a language.
For DivX video, if the subtitles do not appear
correctly, continue the following steps to
change the character set.
Synchronize picture and sound
If the audio and video are not synchronized, delay
the audio to match the video.
3
4
5
Press SETUP.
1
While playing video, press and hold AUDIO
SYNC.
Select [Preference Setup] and then press OK.
Select [DivX Subtitle] and then select a
character set that supports the subtitle.
»
Audio sync menu is displayed.
2
Press the +/- or Navigation buttons to
synchronize the audio with the video, and
then press OK.
Character Set
[Standard]
Language
English,Albanian, Danish,
Dutch, Finnish, French, Gaelic,
German, Italian, Kurdish (Latin),
Norwegian, Portuguese,
Note
Spanish, Swedish andTurkish
• Picture and sound can be synchronized through
the setup menu of your home theater, press
SETUP, select [Audio Setup] > [Audio Sync].
[Central Europe] Albanian, Croat, Czech, Dutch,
English, German, Hungarian,
Irish, Polish, Romanian, Slovak,
Slovene and Sorbian
[Cyrillic]
Bulgarian, Belorussian, English,
Macedonian, Moldavian,
Data f les
Russian, Serbian and Ukrainian
Your home theater can play pictures, audio and
video files contained in a disc or a USB storage
device. Before you play a file, check that the file
format is supported by your home theater (see
'File formats' on page 16).
[Greek]
[Hebrew]
[Chinese(Simp)] Simplified Chinese
Greek
Hebrew
1
2
Play the files from a disc or USB storage
device.
VOD code for DivX
To stop play, press
To resume the video from where you
stopped, press
.
Before you purchase DivX videos and play them
on your home theater, register the home theater
•
.
1
Press SETUP.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Select [General Setup] and then press OK.
•
•
Track GoTo: Enter the track time to skip
to a specific part of the track.
SelectTrack: Select a specific track.
Select [DivX(R)VOD Code] and then press
OK.
4
Press OK again.
»
The DivXVOD registration code for
your home theater is displayed.
Video options
1
Press INFO.
The video options menu is displayed.
»
Depending on the video source, some
options are not available.
USB storage devices
2
Press the Navigation buttons and OK to
select and change:
Enjoy pictures, audio, and video stored on a USB
storage device such as an MP4 player or digital
camera.
•
•
•
[Title]: Select a specific title.
[Chapter]: Select a specific chapter.
[Track]: Select a specific track (forVCD/
SVCD only).
What you need
•
A USB storage device that is formatted for
FAT file system, and complies with the Mass
Storage Class.
•
•
[Audio]: Select audio language for video.
[Subtitle]: Select subtitle language for
video.
•
•
•
•
[Angle]: Select video scenes recorded in
different camera angels.
Note
• If you use a USB extension cable, USB HUB or
USB multi-reader, the USB storage device may
not be recognized.
• You can connect to a digital camera if they can
play the files without using a special computer
program.
[TTTime]: Skip to a specific part of the
video by entering the title time.
[ChTime]: Skip to a specific part of the
video by entering the chapter time.
[DiscTime]: Skip to a specific part of the
video by entering the disc time (forVCD/
SVCD only).
•
•
[TrackTime]: Skip to a specific part of
the video by entering the track time (for
VCD/SVCD only).
[Preview]: Select a content preview for
disc.
1
Connect a USB storage device to the
(USB) connector on your home theater.
2
Press USB.
»
A content browser is displayed.
•
•
[Repeat]: Select a repeat mode.
[Time Disp.]: Select the information of
time display.
3
4
Select a file and then press OK.
Use the play buttons to control play (see
'Play buttons' on page 9).
Picture options
Audio, video, and picture options
1
Press INFO to access picture preview
mode.
»
12 thumbnail pictures are displayed.
Use advanced features when you play pictures, audio
and video files from a disc or a USB storage device.
2
3
Press
preview page.
/
to go to previous or next
Audio options
Press the Navigation buttons and OK to
select a picture.
1
Press INFO repeatedly to cycle through
the following options:
•
Show the current track information and
time.
•
Disc GoTo: Enter the disc time to skip to
a specific part of the disc.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Press to stop the installation of
radio stations.
Press and hold to erase the preset
radio station.
Musical slideshow
If the picture and audio files are from the same
disc or USB storage device, you can create a
musical slideshow.
PROGRAM
Manual:
1
2
Select an audio track and then press OK.
1) Press PROGRAM. 2) Press
to select your preset. 3) Press
PROGRAM again to store the
radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
/
Press
BACK and then go to the picture
folder.
3
Select a picture and then press OK to start
the slideshow.
4
5
Press to stop slideshow.
Press again to stop music.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching the
tuning grid erases all preset radio stations.
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
1
2
3
Press RADIO.
Press
Press and hold
between 50 kHz or 100 kHz.
.
(Play/Pause) to toggle
Note
• AM and digital radio are not supported.
• If no stereo signal is detected, or if fewer than
five stations are found, you are prompted to
install the radio stations again.
MP3 player
Connect a MP3 player to play audio files.
What you need
1
2
Extend the FM antenna at the back of your
home theater and place it away from theTV
or other sources of radiation.
•
•
An MP3 player.
A 3.5mm stereo audio cable.
Press RADIO.
»
If you have already installed the radio
stations, the last channel that you listened
to is played.
1
Using the 3.5mm stereo audio cable, connect
the MP3 player to the MUSIC iLINK
connector on your home theater.
»
If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY appears on
2
3
Press SOURCE repeatedly until MUSIC
I-LINK appears on the display panel.
Press the buttons on the MP3 player to select
and play audio files.
the display panel. press
.
3
Use the remote control to listen or to
change radio stations.
Create MP3 f les
Button
Numeric
buttons,
Action
Select a preset radio station.
Use your home theater to convert audio CDs into
MP3 files.
What you need
/
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
•
•
An audio disc.
A USB storage device.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Connect a USB storage device to your home
theater.
Choose sound
2
3
Play your audio CD (CDDA).
This section helps you choose the ideal sound for
your video or music.
Press CREATE MP3.
»
A confirmation message is displayed.
4
Select [Yes], and then press OK.
Sound mode
»
The create MP3 screen is displayed.The
right panel contains MP3 settings and the
left panel shows the audio tracks.
Select predefined sound modes to suit your video
or music.
1
Press SOUND repeatedly to select a sound
mode.
CREATE MP3
TRACK
OPTIONS
•
•
•
CINEMAA: Enjoy a cinematic audio
experience, specially enhanced for
movies.
SANGEET: Recreate the original
recording environment of your music, in
the studio or at a concert.
ORIGINAL: Experience the original
sound of your movies and music, without
added sound effects.
Track01
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Bitrate
Normal
Track02
Track03
Track04
Track05
Track06
Track07
128kbps
CRT ID3
Device
Yes
USB1
SUMMARY
Select Track
Time
0
00:00
•
•
NEWS: Hear every word with optimized
speech and clear vocals.
CRICKET: Enjoy thrilling arcade sounds,
ideal for action-packed video games or
loud parties.
Select All
Start
Exit
Deselect All
5
Press the Navigation buttons and OK to
select and change:
•
•
•
[Speed]: Select the write-to-file speed.
[Bitrate]: Select the conversion quality.
[Device]: Select the USB storage device
which you use to store the MP3 files.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
6
7
Navigate to the right panel, select the audio
tracks and press OK.
1
Press SURR repeatedly to select a surround
mode.
•
To select all tracks, navigate to [Select
All], and then press OK.
•
MULTI-CH:Traditional 5.1 channel for a
more relaxing cinematic experience.
STEREO:Two-channel stereo sound. Ideal
for listening to music.
•
Select [Start] and then press OK to start the
MP3 conversion.
»
A new folder which contains the MP3
files is created in the USB storage device.
Note
•
To exit the menu, select [Exit], and then
press OK.
• If the audio source is a 2.1 channel. multi-channel
mode will output 5-channel stereo sound.
Note
• Do not remove the USB and press any buttons
when the conversion is in progress.
• DTS CDs and copy-protected CDs cannot be
converted.
• Write-protected or password-protected USB
storage device cannot be used to store MP3 files.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Change settings
Picture and video settings
1
2
Press SETUP.
The home theater settings are already configured
for optimal performance. Unless you have a reason
to change a setting, we recommend that you keep
the default setting.
Select [Video Setup] and then press OK.
•
•
•
[TV System]: Select a video format
supported by theTV.
[TV Display]: Select a picture format to
fit theTV screen.
[HDMI Setup]: [Wide Screen Format]:
For 16:9 wide screenTV display setting.
[HDMIVideo]: Select the resolution of
the video signal being output from the
HDMI OUT.
Note
• You cannot change a setting that is grayed out.
• To return to the previous menu, press
BACK.To exit the menu, press
SETUP.
•
•
[Picture Settings]: Select color settings
for the video display onTV.
[HD JPEG]: Enable or disable high
definition picture display.
Language settings
Onscreen display language
Note
1
2
Press SETUP.
Select [General Setup] and then press OK.
• If you change a setting, make sure that theTV
supports the new setting.
•
[OSD Language]: Select a display
language for menu.
Audio settings
Disc language
1
2
Press SETUP.
1
2
Press SETUP.
Select [Preference Setup] and then press
Select [Audio Setup] and then press OK.
OK.
•
[HDMI Audio]: HDMI audio is
automatically down-mixed to two
channel forTV speakers. If you do not
want to output audio through yourTV,
disable the HDMI audio.
•
•
•
[Audio]: Select an audio language for
discs.
[Subtitle]: Select a subtitle language for
discs.
[Disc Menu]: Select a menu language for
discs.
Parental control settings
Note
Password and Ratings
• If your preferred disc language is not available,
select [Others] from the list, and enter the
4-digit language code found at the end of this
user manual.
• If you select a language that is not available on a
disc, the home theater uses the default language
of the disc.
1
2
Press SETUP.
Select [Preference Setup] and then press OK.
•
[Password]: Set or change your password
for parental control access. If you do not
have a password or have forgotten your
password, enter 0000.
•
[Parental]: Enable maturity-based restricted
access for playback of DVD-video that
are recorded with ratings.To play discs
irrespective of the rating, select [8Adult].
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock disc
6 Update software
1
2
Press SETUP.
Select [General Setup] and then press OK.
Philips continually tries to improve its products.
To get the best features and support, update your
home theater with the latest software.
•
[Disc Lock]: Lock the disc to restrict
play.You can lock up to 20 discs on your
home theater.
Compare the version of your current software
support. If the current version is lower than the
latest version available on the Philips support
website, upgrade your home theater with the
latest software.
Note
• To play a locked disc, follow the onscreen
instructions to enter the password, and then
press OK.
Caution
• Do not install a lower version of software than
the current version installed on your product.
Philips is not liable for problems caused due to
software downgrade.
Display settings
1
2
Press SETUP.
Select [Preference Setup] and then press OK.
•
[PBC]: Enable or disable the content
menu navigation ofVCD and SVCD discs
with Play Back Control feature.
Check software version
•
[MP3/JPEG Display]: Select the content
display for MP3/JPEG files.
Check the version of the current software installed
on your home theater.
1
2
Press SETUP.
Energy saving settings
Select [Preference Setup] and then press
OK.
1
2
Press SETUP.
3
Select [Version Info.] and then press OK.
Select [General Setup] and then press OK.
»
The software version is displayed.
•
[Screen Saver]: Switch the home theater
to screen saver mode after 10 minutes of
no activity.
•
[Auto Standby]: Switch the home theater
to standby mode after 30 minutes of no
activity when in disc or USB mode.
[SleepTimer]: Switch the home theater
to standby mode after the elapsed time.
[Display Dim]: Set the brightness of the
home theater front panel display.
Update software through USB
What you need
•
•
•
A USB flash drive that is FAT-formatted, with
at least 75MB of memory. Do not use a USB
hard drive.
•
•
A computer with Internet access.
An archive utility that supports the ZIP file
format.
Restore default settings
1
2
Press SETUP.
Select [Preference Setup] > [Default], and
then press OK.
3
Select [Ok] and then press OK to confirm.
»
Your home theater is reset to its default
settings, except for parental control setting.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Download the latest software
7 Product
specifications
1
2
Connect a USB flash drive to your computer.
support.
3
At the Philips Support website, find your
product and locate the Software and drivers.
Note
»
The software update is available as a zip
file.
• Specifications and design are subject to change
without notice.
4
5
6
Save the zip file in the root directory of your
USB flash drive.
Use the archive utility to extract the software
update file in the root directory.
Region codes
Disconnect the USB flash drive from your
computer.
The type plate on the back or bottom of the
home theater shows which regions it supports.
Step 2: Update the software
Country
DVD
Europe, United Kingdom
Caution
• Do not switch off the home theater or remove
the USB flash drive during the update.
Russia, India
1
Connect the USB flash drive containing the
downloaded file to your home theater.
•
Make sure that the disc compartment is
closed and there is no disc inside.
Media formats
•
DVD-Video, DVD+R/+RW, DVD-R/-RW,
2
3
Switch yourTV to the correct source for
your home theater.
DVD+R/-R DL, CD-R/CD-RW,Audio CD,
Video CD/SVCD, Picture files, MP3 media,
WMA media, DivX media, USB storage
device
Follow the onscreen instructions to confirm
the update.
»
Once complete, the home theater
automatically switches off and restarts. If
it does not, disconnect the power cord
for a few seconds and then reconnect it.
File formats
•
•
•
Audio: .mp3, .wma
Video: .avi, .divx, .mpg, .mpeg,
Picture: .jpg, .jpeg
Amplif er
•
•
•
Total output power: 300W RMS (30%THD)
Frequency response: 20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
•
AUX: 2V
Music iLink: 1V
•
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
Subwoofer
•
•
Signal system: PAL / NTSC
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p
•
•
•
•
•
Output power: 50 W RMS (30%THD)
Impedance: 4 ohm
Speaker drivers: 133 mm (5.25") woofer
Dimensions (WxHxD): 195 x 265 x 265 mm
Weight: 2.83 kg
Audio
•
S/PDIF Digital audio input:
Optical:TOSLINK
Sampling frequency:
Speakers
•
•
Center speaker:
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
•
•
•
•
•
Output power: 50 W RMS (30%THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") woofer
Dimensions (WxHxD): 159 x 84.5 x 80 mm
Weight: 0.33 kg
•
•
Constant bit rate:
•
•
MP3: 32 kbps - 320 kbps
WMA: 64 kbps - 192 kbps
Front/Rear speaker:
•
•
•
•
•
Output power: 4 x 50 W RMS (30%THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") full range
Dimensions (WxHxD): 84.5 x159 x 80mm
Weight: 0.34~0.37 kg/each
Radio
•
Tuning range:
•
Europe/Russia/China: FM 87.5-108 MHz
(50 kHz)
•
Asia Pacific/Latin America: FM 87.5-108
MHz (50/100 kHz)
Remote control batteries
•
•
Signal-to-noise ratio: FM 50 dB
Frequency response: FM 200 Hz-12.5 kHz /
±6 dB
•
2 x AAA-R03-1.5V
Laser
USB
•
•
Type: Semiconductor laser GaAIAs (CD)
Wave length: 645 - 665 nm (DVD), 770 - 800
nm (CD)
Output power: 6 mW (DVD), 7 mW (VCD/
CD)
Beam divergence: 60 degrees.
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
•
•
•
•
File system: FAT16, FAT32
Maximum memory support: < 160 GB
Main unit
•
Power supply:
•
Europe/China/Russia/India: 220-240V~,
50 Hz
•
Latin America/Asia Pacific: 110-240V~,
50-60 Hz
•
•
•
•
Power consumption: 55 W
Standby power consumption: ≤ 0.9 W
Dimensions (WxHxD): 360 x 58 x 325 mm
Weight: 2.3 kg
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
•
On your home theater, press SOURCE
repeatedly to select the correct audio input.
8 Troubleshooting
Distorted sound or echo.
•
If you play audio from theTV through the
home theater, make sure that theTV is muted.
Audio and video are not synchronized.
Warning
•
1) Press and hold AUDIO SYNC. 2) Press
the +/- or Navigation buttons within 5
seconds to synchronize the audio with the
video.
• Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to repair the
product yourself.
Play
If you have problems using this product, check the
following points before you request service. If you
com/support.
Cannot play a disc.
•
Clean the disc.
•
Make sure that the home theater supports
the type of disc (see 'Media formats' on page
16).
•
•
Make sure that the home theater supports
the region code of the disc.
If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalized.
Main unit
The buttons on the home theater do not work.
•
Disconnect the home theater from the power
supply for a few minutes, then reconnect.
Cannot play a DivX f le.
•
Make sure that the DivX file is encoded
according to the 'HomeTheater Profile' with
the DivX encoder.
Picture
•
Make sure that the DivX file is complete.
DivX subtitles do not display correctly.
No picture.
•
Make sure that theTV is switched to the
correct source for the home theater.
No picture on aTV connected through HDMI.
•
Make sure that the subtitle file name is the
same as the movie file name (see 'Subtitles'
on page 10).
Select the correct character set (see
'Subtitles' on page 10).
•
Make sure that the HDMI cable is not faulty. If
it is faulty, replace it with a new cable.
If this happens when you change the HDMI
video resolution, switch to its default mode:
1) Press . 2) Press . 3) Press ZOOM.
Wait for 10 seconds for auto recovery, or
change the HDMI video setting.
•
•
Cannot read the contents of a USB storage
device.
•
Make sure that the format of the USB
storage device is compatible with the home
theater.
Make sure that the file system on the USB
storage device is supported by the home
theater.
•
Disc does not play high-def nition video.
•
•
•
•
Make sure that the disc contains high-
definition video.
Make sure that theTV supports high-
definition video.
'No entry' or 'x' sign appears on theTV.
The operation is not possible.
EasyLink does not work.
•
Use an HDMI cable to connect to theTV.
•
Make sure that the home theater is
Sound
connected to a Philips brand EasyLinkTV, and
the EasyLink option is turned on (see 'Set up
EasyLink (HDMI-CEC control)' on page 8).
No sound from home theater speakers.
•
Connect the audio cable from your home
theater to yourTV or other devices (see
'Connect audio fromTV and other devices'
on page 8).
When you switch on theTV, the home theater
automatically switches on.
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC).To make the
home theater work independently, switch off
EasyLink.
•
Reset your home theater to its factory settings
(see 'Restore default settings' on page 15),
then switch it off and switch on again.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Notice
HDMI, and HDMI logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC in the United
States and other countries.
This section contains the legal and trademark
notices.
Copyright
CLASS 1
LASER PRODUCT
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Trademarks
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
DivX , DivX Ultra , DivX Certified and
associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under
license.
DivX Ultra Certified to play DivX video with
advanced features and premium content.
ABOUT DIVXVIDEO: DivX is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation.This is an official DivX Certified
device that plays DivX video.Visit divx.com for
more information and software tools to convert
your files into DivX videos.
ABOUT DIVXVIDEO-ON-DEMAND:This DivX
Certified device must be registered in order to
play purchased DivXVideo-on-Demand (VOD)
movies.To obtain your registration code, locate the
DivXVOD section in your device setup menu. Go
to vod.divx.com for more information on how to
complete your registration.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Index
H
HDMI audio
HDMI video
HDMI-CEC
14
14
8
A
audio fromTV and other devices
audio input mapping
audio language for discs
audio options
8
9
14
11
14
15
L
audio settings
auto standby
language settings
lock disc
14
15
B
M
batteries
17
main unit overview
menu language for discs
MP3 player
4
14
12
12
musical slideshow
C
change password
character set
14
10
8
7
4, 12
7
6
8
6
7
4
3
9
12
connect analog audio cable
connect composite video cable
connect FM antenna
connect HDMI cable
connect home theater
connect optical audio cable
connect speakers
connect toTV
O
one-touch play
one-touch standby
onscreen menu language
9
9
14
P
connectors
parental control
parental ratings
password
14
14
14
15
11
14
3
consumer support
control play buttons
create MP3
PBC (play back control)
picture options
picture settings
product serial number
program radio stations
D
disc menu
14
9
12
discs
display brightness
display menu for MP3/JPEG
display menu forVCD/SVCD
disposal
DivX
DivX subtitles
15
15
15
3
R
recycling
remote control overview
repeat mode
restore default settings
rotate pictures
radio
12
3
5
9
15
9
10, 16
10
E
Easylink (HDMI-CEC)
Easylink controls
8
9
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
S
screen saver
15
14
15
12
15
13
6
setup menu
sleep timer
slideshow
software version
sound mode
speakers placement
speakers setup
8
specif cations
16
14
16
16
13
10
9
subtitle language for discs
supported f le format
supported media formats
surround sound
synchronize picture and sound
system audio control
T
time search
titles
11
11
19
18
12
trademarks
troubleshooting
tuning grid
U
update software
USB storage device
15
11
V
video options
video resolution
VOD code for DivX
11
14
10
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
This Philips Home Theatre System is covered under warranty against any defect arising out of faulty
or defective material or workmanship for a period of 12 Months from the date of purchase.
Should a defect develop during the period of warranty, Philips Electronics India Limited undertakes to
repair the apparatus free of charge through an Authorised Philips service centre. If the purchaser shifts
his residence to other town, the warranty will be valid at the nearest Authorised Philips service center.
The Warranty is not valid in case:
•
•
•
•
•
•
•
•
Proof of purchase is not accompanied with this warranty form
This warranty form is not completed immediately after purchase
The Apparatus is not used according to this manual
Defects are caused by improper or reckless use
Any repair work are done by person other than Authorised Philips service center
Any modification or alteration of any nature are made in the apparatus
The serial number is tampered
Defects due to causes beyond control like lightning, abnormal voltage, Acts of God or
while in transit to the purchaser’s residence
Maintenance Tips for your Home Theatre System:
•
•
•
Always keep a Disc loaded in your Home Theatre System tray.
Keep the home theatre away from the dusty areas. Keep it covered with a dust cover.
Clean your Home Theatre System Lens after every 20 Discs played.
o
Use the 2 brush Philips DVD Lens Cleaner SVC2520 for best results.
•
Clean the CDs / VCD / DVD / MP3 CD before inserting in your Home Theatre System
Philips Electronics India Limited,
Registered Office: 7, Justice Chandra Madhab Road, Kolkata – 700 020
For Any Sales & Service Enquiry:
Email us at [email protected]
Call us on Tel No. 1800 102 2929 *
1860 180 1111 *
0124- 429 1111*
*Standard Call rates apply for the calls made to above telephone lines
Pls fill the following for your reference and warranty validity:-
• Serial No:_______________________________
• Bill No. & Date of Purchase:________________
• Purchaser’s Name:________________________
• Location & Tel No.:_______________________
• Dealer’s Name:___________________________
• Location & Tel No:________________________
• Dealer’s Stamp & Sign:_____________________
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
sgpjp_1208/94_v1
Download from Www.Somanuals.com. All Manuals Search And Download.
|