REM400
DSS Universal Remote Control
User’s Guide
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . 2
Keys And Functions . . . . . . . . . . . . . . 2
Setting Up Your Remote Control . . . . . 3
About Batteries . . . . . . . . . . . . . . . . . 4
Using The Lighted Keypad . . . . . . . . . 4
Programming Your Remote Control. . . 5
Operating Your Remote Control. . . . . . 8
About Other Features . . . . . . . . . . . . 11
Quick Features Setup Guide . . . . . . . 12
Troubleshooting . . . . . . . . . . . . . . . . 14
Manufacturer’s Codes. . . . . . . . . . . . 15
Download from Www.Somanuals.com. All Manuals Search And Download.
KEYS AND FUNCTIONS (continued)
e LIGHT Key
Key Charts
1 Red Indicator Light
Press LIGHT once to turn on or off the
keypad back light.
The Red Indicator Light blinks to show
that the remote control is working and
also provides feedback during program-
ming sequences.
r LAST Key
Press LAST once to recall the last channel
and to page back one screen in the
main menu.
2 Component Keys
t L1~ L3 Keys
Press TV, VCR, CBL, AUD, DSS, or CD once
to select a home entertainment compo-
nent to control.
Use the learning keys, L1~L3, to store
and recall additional remote control
functions.
3 DSS Directional Pad
Use the pad to move the cursor in the
program guide and menu screens.
y FC1 And FC2 Keys
User-programmable Favorite Command
Keys (see page 9 for details).
4 MENU Key
u MCP Key
Press MENU to access the menu of your
chosen component.
Multiple-component On/Off Key (see
page 9 for details).
5 SELECT Key
i Keypad
Use SELECT to choose options from your
selected component’s menu or guide.
Use the keypad (0~9) to directly enter
in channels (for example, 09 or 31). The
keypad is also used for all programming
sequences, such as entering in your pro-
gramming codes.
6 GUIDE Key
Use GUIDE to display the programming
guide for your components (if applicable).
o SCAN Key
7 EXIT Key
Press SCAN once to change channels every
3 seconds. Press it again to stop the scan.
Use EXIT to exit out of the selected com-
ponent’s menu or guide.
p ENTER Key
8 POWER Key
Press ENTER once after entering channel
numbers on some TV models.
Press POWER once to turn on or off the
selected home entertainment component.
a VCR Transport Keys
9 VOL Keys
Use the VCR Transport Keys to control
your VCR, as well as CD or DVD player.
Press REC twice to record a tape.
Use VOL + (or VOL -) to raise (or lower)
the sound volume.
0 CH Keys
s TV/VCR Key
Use CH + (or CH-) to select the next
higher (or lower) channel for the selected
home entertainment component.
Press TV/VCR once to viewVCR playback
or TV through the VCR.
d SET Key
q MUTE Key
Use SET for all programming sequences.
Press MUTE once to turn sound off or on.
w SLEEP Key
Press SLEEP to activate your TV’s internal
sleep timer. (Not available for all TVs.)
SETTING UP YOUR REMOTE CONTROL
Before using your new DSS remote control,
you will need to obtain and install new bat-
teries, as described on the next page.
Then you’ll also need to program the DSS
remote control with the correct code num-
bers for your specific components. See
instructions starting on page 5.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT BATTERIES
NOTE: The DSS requires four (4) new “AAA”
alkaline batteries (not supplied). Do not mix
old and new batteries or mix alkaline with
manganese-type batteries.
4. Test the unit by pressing POWER and any
Component key (e.g., TV, VCR, CBL, etc.).
If the batteries are inserted correctly, the
red indicator light will blink once.
Installing Batteries
Battery Saver
The DSS has a Time-Out feature that will
automatically deactivate the remote control if
a key is depressed for more than 30 seconds.
This feature will help conserve the battery life
should your remote control get stuck in a
place where keys remain depressed (e.g.,
between the sofa cushions).
1
Replacement And Code Saver
When the batteries need replacing, the DSS
remote control will stop working and will
require four (4) new“AAA”alkaline batteries
for continued operation. Simply replace the
batteries,and the DSS remote control will be
restored to its full functionality, complete
with your favorite settings.
2
3
All of the codes and programmed informa-
tion will be stored,ensuring that you will not
have to reprogram the DSS remote control.
1. On the back of the remote control, push
the tab and lift the battery compartment
cover off.
2. Match the + and – marks on the batteries
to the + and – marks in the battery case
and insert four (4)“AAA”alkaline batteries.
3. Press the battery cover back into place.
The tab should click when the cover is
locked.
USING THE LIGHTED KEYPAD
When activated, the DSS remote control fea-
tures a lighted keypad that illuminates all of
the remote control keys whenever you press
any key.
2.
To turn off the keypad back light,
press LIGHT once again.(The key-
pad will not light whenever you
press any key.)
1.
To turn on the keypad back light,
press LIGHT once.The keypad will
remain lit for 5 seconds after you
release any key.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING YOUR REMOTE CONTROL
To Manually Program The Remote Control:
Philips/Magnavox Components
NOTE: To program a TV/VCR Combo, skip
these instructions and follow the steps on the
next page.
The DSS remote control can control up to six
different components and is already pre-pro-
grammed for use with newer Philips/
Magnavox audio/video equipment. Unless
you want to change a factory setting, skip the
programming instructions and simply start
using your new remote control.
1.
Manually turn on a component
(e.g.,TV, VCR,etc.) and,if applic-
able, insert media (e.g., cassette).
2.
On the remote con-
trol, press a compo-
Programming Other Components
nent key once (e.g.,
To control component brands other than
Philips/Magnavox,you’ll need to perform the
following steps to manually program the
DSS with codes listed under Manufacturer’s
Codes on pages 15 through 19. Or as alterna-
tive, you can use the Auto Scan feature, on
page 6, to program your component codes.
TV, VCR, CBL, AUD, DSS, or CD).
3.
4.
Press and hold SET (approx.
5 seconds) until the red light
blinks twice, then release SET.
Enter the first four-digit code for
your brand of component. If
performed correctly, the red
light will blink twice.
The following chart lists the remote control’s
component keys and what type of device
each key will control:
5.
Aim the remote control at the
component and press POWER
once. It should turn off. If it does
not respond, repeat steps 2 and
3, trying each code for your
brand until you find one that
works. If it still does not work,
try using Auto Scan (on page 6)
to program your component.
Key
TV
Programmed To Control
TV
VCR
CBL
AUD
VCR, DVD or LD Player
Cable Box
Amplifier, Tuner, Misc. Audio,
or CD Player
6.
Repeat steps 1 through 5 for each
component you want to program
into the DSS remote control.
DSS
CD
Digital Satellite System
CD Player, Amplifier, Tuner, or
Misc. Audio
NOTES: Press each key within 10 seconds of
the previous entry. Otherwise, the remote con-
trol will exit the programming mode.
NOTE: If you want the component keys to
control other types of devices, you’ll need to
reassign the component keys. See page 7.
If you press SET at any time (except during
step 3), the remote control will exit the pro-
gramming mode without saving your entries.
You will have to start with step 1 to begin pro-
gramming again.
IMPORTANT: Please completely read and
review the following steps before proceeding.We
recommend highlighting the codes (starting on
page 15) for the brands you wish to program or
writing them down in the supplied chart.
Setup Codes For My Components
TV
VCR
CBL
DSS
CD
DVD
AUDIO
LD
OTHER
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING YOUR REMOTE CONTROL (continued)
6.
(continued)
Programming A TV/VCR Combo
If there is no separate TV code
listed, you will need to perform
the following steps to access vol-
ume control:
Perform the following instructions to have
the DSS control a TV/VCR Combo. For
Sharp and Sony models, also see page 14.
IMPORTANT: Please completely read and
review these steps before proceeding. Highlight
the code (on page 17) for the brand you wish to
program or write it down in the supplied chart.
a.
Press VCR once.
b.
Press and hold SET
until the red light
blinks twice, then
release SET.
Setup Code For My Component
TV/VCR
c.
Press VOL +.
1.
2.
3.
Manually turn on the TV/VCR
Combo; insert a video cassette.
On the remote control, press VCR
once.
Programming With Auto Scan
If your component does not respond to the
remote control after trying all codes listed for
your brand,or if your brand is not listed at all,
try searching for your code using Auto Scan.
For example, to search for a code for a TV:
Press and hold SET until the red
light blinks twice, then release
SET.
4.
Use the Setup Codes For TV/VCR
Combos (on page 17) to find the
brand name. Enter the first four-
digit code for your component.If
performed correctly, the red
light will blink twice.
1.
2.
3.
On the remote control, press TV
once.
Press and hold SET until the red
light blinks twice,then release SET.
Aim the remote control at the TV
and press SCAN.The red light will
blink twice.
5.
Aim the remote control at the
TV/VCR Combo. Press POWER
once. It should turn off. If it does
not respond, repeat steps 2-3,
trying each code for your brand
until you find one that works. If
it still doesn’t work, use Auto
Scan (later on this page) to pro-
gram your TV/VCR combo.
4.
Continue aiming the remote con-
trol at the TV (which may take up
to 5 minutes) until it turns off.
Immediately press any key except
VOL+, VOL–, EXIT, SCAN, or SET.
NOTES: In the search mode, the
remote will send IR (infrared)
codes from its library to the
selected device, starting with the
most popular code first.
NOTE: If the TV/VCR Combo
does not have a Power key, press
PLAY on the DSS.
6.
If you’ve located a TV/VCR code
that works, but it has a separate
TV code, you’ll also need to pro-
gram it into the remote control to
access volume control as follows:
If you have passed by the code
that turns off the TV, press VOL–
one or more times until the TV
turns on again.
a.
Press TV once.The red
5.
6.
To lock in the code and exit Auto
Scan, press and release SET the
red light will blink twice.
light will blink twice.
b.
Press and hold SET
until the red light
blinks twice, then
release SET.
To search for codes of other com-
ponents, repeat steps 1 through
5, but substitute the appropriate
key (e.g., VCR, CBL, AUD, DSS, or
CD) for the (VCR, Cable, Audio,
Satellite, or CD) component you
are searching for.
c.
Enter the TV code for
the TV/VCR Combo.
If performed cor-
rectly, the red light
will blink twice.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING YOUR REMOTE CONTROL (continued)
Checking The Auto Scan Codes
Re-Assigning Component Keys
If you have set up the remote control using
Auto Scan, you can now find out which four-
digit code is operating your component:
The DSS remote can be set up to control any
combination of six home entertainment
components.By following these instructions,
you can re-assign or duplicate a component
key onto an unused component key.
1.
On the remote con-
trol, press a compo-
nent key once (e.g.,
TV, VCR, CBL, AUD, DSS, or CD).
1.
Press and hold SET until the red
light blinks twice, then release
SET.
2.
3.
Press and hold SET until the red
light blinks twice, then release
SET.
2.
Enter 9-9-2. The red light will
blink twice.
Enter 9-9-0. The red light will
blink twice.
3.
4.
Press the Component key (e.g.,
TV, VCR, etc.) to be moved once,
then press the Component key
(e.g.,AUD, etc.) to be re-assigned
once. When re-assignment is
done, the red light will blink
twice to confirm your choice.
4.
To view the code for the first
digit, press 1 once. Wait 3 sec-
onds, count the red light blinks
(e.g., 3 blinks = 3) and write
down the number.
The re-assigned key is now ready
to be programmed for the new
component. See Programming
Other Components on page 5.
NOTE: If a code digit is “0”, the
red light will not blink.
5.
6.
Repeat step 4 three more times
for remaining digits. Use 2 for
the second digit, 3 for the third
digit, and 4 for the fourth digit.
Example – Re-assigning The AUD Key To
Be A DVD (Or VCR) Key:
For example, to have the DSS control a TV, a
Cable Converter, and two VCRs, you will
need to re-assign the unused AUD key to
operate the second VCR as follows:
To find codes of other compo-
nents, repeat steps 1 through 5,
but substitute the appropriate
key (e.g., VCR, CBL, AUD, DSS, or
CD) for the component you are
checking. As before, write down
each four-digit code.
1.
Press and hold SET until the red
light blinks twice, then release
SET.
2.
Enter 9-9-2. The red light will
blink twice.
3.
4.
Press VCR once.
Then press AUD once. When re-
assignment is done, the red light
will blink twice to confirm your
choice.
5.
The AUD key is now ready to be
programmed for your DVD (or
VCR) player. See Programming
Other Components on page 5.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR REMOTE CONTROL
The DSS Universal Remote Control is
L1~L3 Keys
designed to be an enhanced replacement for
your original remote control.Although most
keys operate the same (see Key Charts on
page 3), some do differ or provide unique
features as described below.
Use the learning (L1, L2, L3) keys to add
functions that are unique to your home
entertainment components (e.g., Tracking
Up or Down for a VCR).
NOTE: Please have your original remote con-
trols handy before programming learning. Be
sure to press each key within 10 seconds of the
previous entry. If not, the remote control will
exit the programming mode.
DSS Directional Pad
The DSS remote control allows you to con-
trol the on-screen menu just like you would
with your original remote control. Pressing
the MENU key allows you to access the on-
screen menu of the component you have
selected (e.g. TV, VCR, CBL, AUD, DSS, or CD).
To Program The L Keys:
1.
2.
On the DSS remote control, press
and hold SET until the red light
blinks twice, then release SET.
While in the menu, you can use the direc-
tional pad* to navigate and change the set-
tings of the menu. To exit out of the Menu
mode, either press the MENU key again or
the EXIT key (depending on how the original
remote control functioned).
Enter 9-7-5. The red light will
blink twice.
3.
4.
5.
Press the component
key once in which
you want to learn a
feature (e.g.,TV).
*NOTE: If your component’s On-Screen menu
requires the use of the Volume and Channel
keys to navigate and change the On-Screen
menu settings, you will need to use the VOL+,
VOL–, CH+, and CH – keys.
Press the Lkey once (e.g., L1~L3)
in which the new feature is to be
learned. The red light will blink
rapidly.
GUIDE Key
The GUIDE key works just like the Guide key
of your original remote control and allows
you to access the On-Screen guide* of the
component you have selected (e.g. CBL, DSS,
and some newer TVs).
Place your original remote con-
trol head to head (about 2" apart)
from the DSS remote control.
While in the Guide mode, the directional
pad will allow you to navigate Up, Down,
Left and Right just like you would with your
original remote control.
2"
6.
On your original remote control,
press and hold the key (i.e., fea-
ture) to be learned until the red
light on the DSS remote control
blinks twice. If the red light does
not blink twice, stop and repeat
steps 1 through 5.
To exit out of the Guide mode, either press
the GUIDE key again or EXIT (depending on
how the original remote control functioned)
to return to normal operation.
NOTE: *On-Screen guide is an interactive
channel listings menu that is available on
most DSS Satellite systems and is also used
with advanced converters being offered by
some cable systems. This feature is not applic-
able for all DSS or cable boxes.
7.
8.
To learn functions on the other
L keys, repeat steps 3 through 6.
To lock in new feature(s) on the
DSS remote control,press and hold
SET until the red light blinks twice.
SELECT Key
The SELECT key lets you choose features displayed
on the On-Screen menu and programs while in
the Guide mode.
9.
To test a new feature, press the
component key that was learned
once. Then press the L key where
the component’s feature was
learned.
If your original remote includes a Select key,
then the DSS’s SELECT key will operate in the
same manner for the selected component.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR REMOTE CONTROL (continued)
4.
Press a Component
Deleting Functions From The L Keys:
key once (e.g., TV,
VCR, CBL, AUD, DSS,
or CD).
1.
On the DSS remote control,press
and hold SET until the red light
blinks twice, then release SET.
5.
6.
Press POWER.
2.
Enter 9 - 7 - 6.
Repeat steps 4 and 5 for each
component you want under
master power on/off control.
7.
Press and hold SET until the red
light blinks twice, then release
SET.
3.
Press the component
key once where the
learned feature to be
deleted is stored (e.g., TV).
To Clear The MCP Key:
4.
5.
Press the L key to be deleted
twice. The red light will blink
twice after the second press.
1.
On the remote control, press and
hold SET until the red light
blinks twice, then release SET.
To clear additional functions
stored on the L keys, repeat steps
1 through 4 .
2.
Enter 9-9-5. The red light will
blink twice.
SCAN Key
3.
4.
Press MCP once.
The SCAN key allows the remote control to
scan the TV, VCR, CBL and DSS channels.
When activated, the remote control will
change channels every 3 seconds.
Press and hold SET until the red
light blinks twice, then release
SET.
FC1 And FC2 Keys
1.
On the remote con-
trol, press TV, VCR,
CBL, or DSS once.
The FC1 and FC2 keys can be setup to per-
form a number of functions with a single
key press once the selection is programmed.
Repetitive, time-consuming operations can
be grouped for easy, convenient access
through the press of one key.
2.
Press SCAN once. Scanning will
start with the current channel,
then proceed to the next channel
up, and continue until all chan-
nels of your TV,VCR, CBL or DSS
component are scanned.
The FC keys are ideal for home theater oper-
ations, setting a favorite channel, adding to
multiple component uses, guide steps or
other multiple functions you would like to
control with one key press. On one key, you
can define and program a sequence of events.
3.
To stop scanning channels, press
SCAN.
MCP Key
Moreover, each FC key can hold up to 15 key
presses, allowing optimal individual cus-
tomization. Below are a few examples to get
you started.
The DSS remote control includes a multi-
component power (MCP) key that can be
programmed for master power on/off con-
trol of components using a single key.
Programming A Favorite Channel
To program the MCP key:
With so many channels available through
your cable system or satellite provider, a
favorite channel can be programmed for easy,
direct channel selection with one key press.
1.
2.
On the remote control, press and
hold SET until the red light blinks
twice, then release SET.
Enter 9-9-5. The red light will
blink twice.
For example, let’s assume your favorite pro-
grams are on channel 71. Use the following
instructions to program the FC1 or FC2 key
for this channel:
3.
Press MCP once.
continued on next page...
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR REMOTE CONTROL
You can setup a sequence on the FC1 or FC2
FC1 And FC2 Keys
key to turn on the TV and cable box, and
then tune the cable box to a specific channel
(e.g., 11) with the push of one key.
Programming A Favorite Channel (cont.)
1.
On the remote control, press and
hold SET until the red light blinks
twice, then release SET.
1.
On the remote control, press and
hold SET until the red light blinks
twice, then release SET.
2.
Enter 9-9-5. The red light will
blink twice.
2.
Enter 9-9-5. The red light will
blink twice.
3.
4.
Press and release either FC1 or
3.
4.
Press and release either FC1 or
FC2.
FC2.
On the remote con-
trol, press TV, VCR,
CBL, or DSS once.
Enter the following sequence:
CBL,
POWER,
5.
6.
Enter 7-1.
TV,
NOTE: If you have access to over
100 channels, enter in 071.
POWER,
CBL, and
1-1 (or 0-1-1 if you have access
to over 100 channels)
Press and hold SET until the red
light blinks twice, then release
SET.
5.
Press and hold SET until the red
light blinks twice, then release
SET.
Programming A Secondary MCP Key With
Instant Channel Selection
Now when you press the programmed FC
key, the Cable box and TV will turn on and
the Cable box will tune to channel 11.
Just like the MCP key, the FC1 and FC2 keys
can be programmed to turn on and off your
equipment. For instance, let’s say you want
your child to be able to easily turn on the
equipment and select their favorite channel.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT OTHER FEATURES
Volume Lock
Punch Through
The DSS remote control is set at the factory
to control the volume independently while in
the TV,VCR, DSS, CBL,AUD, and CD modes.
The VCR Transport Keys (i.e., REW, PLAY,
FFWD, REC, STOP, and PAUSE) are set at the
factory to control the VCR, even if TV,CBL,or
DSS is the selected mode. In other words,
VCR control“punches through”regardless of
what mode is on. Moreover, you do not have
to press VCR before pressing the mode key.
To control the volume from one mode (e.g.,
TV) while in another mode (e.g., CBL, DSS, or
VCR*),perform the instructions below to lock
the volume setting. This procedure will not
affect separate control of your audio compo-
nent’s volume in the AUD and CD modes*.
However, if AUD or CD is the selected mode,
the VCR Transport Keys will not control the
VCR unless you press VCR first. In these two
modes, the VCR Transport Keys will operate
the functions for the selected component.
*NOTE: By pressing AUD or CD before enter-
ing the sequence below, the DSS remote con-
trol will operate your stereo and home theater
volume controls in all modes.
Example – To Set Volume Lock To TV Mode:
1.
On the remote control, press TV
once.
2.
Press and hold SET until the red
light blinks twice, then release
SET.
3.
Press VOL+. The red light will
blink twice.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK FEATURES SETUP GUIDE
This guide is provided here for your conve-
nience as a quick reference for performing
remote control sequences.
If you need more details, reread the full
instructions presented in earlier pages.
Component Setup
#
#
#
#
x 2
x 2
Turn on
component
(e.g., TV).
Press component
key once
Press SET
until Red Light
blinks twice;
release SET.
Enter 4-digit code Press POWER
for your brand;
once; if no
response,
(e.g., TV).
Red Light blinks
twice after last #. repeat steps
with next code.
1
2
3
4
5
Auto Scan
x 2
x 2
Turn on
component
(e.g., TV).
Press component
key once
Press SET
until Red Light
blinks twice;
Aim remote control
at component;
Press SET
until Red Light
blinks twice;
(e.g., TV).
press SCAN once.
release SET. When off, press any release SET
* NOTE: Not VOL+, VOL-, EXIT, SCAN, or SET.
key* to stop.
to lock code.
1
2
3
4
5
Code Verification
x 2
x 2
Press component
key once
Press SET
until Red Light
blinks twice;
release SET.
Enter 9-9-0;
the Red Light
will blink twice.
Press 1 once for 1st digit.
Wait 3 sec. and count blinks.
Number of blinks equals
value of code digit.
(e.g., TV).
Repeat with 2, 3, and 4.
1
2
3
4
Volume Lock
x 2
Press component*
Press SET
until Red Light
blinks twice;
release SET.
Press VOL+ once.
Volume now controlled
through component
selected in step 1.
key once (e.g., CBL).
* NOTE: Component must have
volume capabilities.
1
2
3
12
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK FEATURES SETUP GUIDE (continued)
Device Re-Assignment (e.g., AUD Key Becomes Secondary VCR Key)
x 2
x 2
Press SET
until Red Light
blinks twice;
release SET.
Enter 9-9-2;
the Red Light
will blink twice.
Press component key
to be moved once
(e.g.,VCR).
Press component key
to be reassigned once
(e.g., AUD). Red Light will
blink twice. Reassigned key is
now ready for programming.
1
2
3
4
Programming The FC Keys (See Page 9 For Further Instructions)
x 2
x 2
or
x 2
Press SET
Enter 9-9-5;
Press FC1 or
FC2 once.
Press component
key that controls
Press SET
until Red Light
blinks twice;
release SET.
until Red Light the Red Light
blinks twice; will blink twice.
release SET.
channels once (e.g.,
CBL). Then enter
channel # (e.g. 7-1)*.
* NOTE: If over 100 channels, enter 0-7-1.
1
2
3
4
5
Programming The L1~L3 Keys (See Page 8 For Further Instructions)
x 2
x 2
Press SET
until Red Light
blinks twice;
release SET.
Enter 9-7-5;
the Red Light
will blink twice.
Press component
key once
Press an L key once
where new feature
is to be learned;
the Red Light will
blink rapidly.
(e.g., TV).
1
2
3
4
2"
x 2
Place remote controls
2" apart; on original one,
press and hold key to be
learned until Red Light on
DSS unit blinks twice.
To learn functions
To lock in new feature,
press SET until
Red Light blinks twice;
then release SET.
onto other L keys (or
if Red Light does not
blink twice in step 5),
repeat steps 1~5.
5
6
7
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM: Red Indicator Light does not
blink when you press a key.
PROBLEM: TV/VCR combo does not
respond properly.
SOLUTION: Replace the batteries with
four (4) new “AAA” alkaline
batteries (see page 4).
SOLUTION: Use the VCR codes for your
brand. Some combo units
may require both a TV code
and a VCR code for full oper-
ation (see page 6).
PROBLEM: The VOL+, VOL–, and MUTE
keys are not functional.
PROBLEM: CH+, CH–, and LAST do not
SOLUTION: Make sure that volume control
is locked to a component that
has volume capabilities and is
programmed into the DSS
remote control.
work for your RCA TV.
SOLUTION: Due to an RCA design (1983-
1987), only the original
remote control will operate
these functions.
PROBLEM: The DSS remote control will
not learn a function properly
from your original remote
control.
PROBLEM: Changing channels does not
work properly.
SOLUTION: If original remote control
required pressing ENTER to
SOLUTION: Make sure the IR LED from
your original remote control
is lined up with the IR LED
on the DSS remote control
(see step 5 on page 8). If your
original remote control has a
lens covering the IR LED, try
moving the original remote
to the left or right, until the
DSS remote control picks up
the signal.
change channels, press ENTER
on the DSS remote control
after entering
number.
a
channel
PROBLEM: Tried Auto Scan and still could
not find a working code.
SOLUTION: Try Auto Scan again after
clearing out the component
key as follows: Press and hold
ENTER until Red Light blinks
twice, then release. Next enter
9 - 9 - 2. Then press and
release the component key to
be cleared twice.
PROBLEM: Red Indicator Light blinks
when you press a key, but
home entertainment compo-
nent does not respond.
SOLUTION: Make sure you are aiming the
DSS remote control at your
home entertainment compo-
nent and that you are within
15 feet of the component you
are trying to control.
PROBLEM: Remote control does not turn
on Sony or Sharp TV/VCR
Combo.
SOLUTION: For power on, these products
require programming TV
codes into the DSS remote
control. For Sony, use TV
code 0029 and VCR code
0061. For Sharp, use TV code
0112 and VCR code 0077.
PROBLEM: The remote control does not
control home entertainment
components or commands
are not working properly.
SOLUTION: Try all listed codes for the
component brand being set
up.Make sure all components
can be operated with an
infrared remote control.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
MGA
MTC
0048, 0059, 0179, 0207
0048, 0059, 0085, 0089, 0214
0049, 0059, 0083, 0125, 0208, 0216
0045
0059, 0083
0279
0174, 0207
0045, 0085, 0179, 0183, 0207, 0279,
Setup Codes For TVs:
Magnavox
Majestic
Marantz
Matsushita
Megatron
Memorex
AOC
0048, 0059, 0214
Admiral
Aiko
0122, 0492
0121
Akai
0059
Alaron
0208
Ambassador
America Action
Ampro
0206
0209
0780
0492
Midland
Minutz
Mitsubishi
Motorola
Multitech
NAD
NEC
NTC
Nikko
Noshi
0046, 0068, 0076, 0080, 0164
0050
0048, 0122, 0179, 0207
0084, 0122
0209
0185, 0195, 0207
0048, 0059, 0085
0121
0059, 0121, 0207
0047
0209
0183, 0195, 0279
0122, 0194
0208, 0265, 0492
0080, 0084, 0279
0047, 0048, 0050, 0059, 0068, 0076,
0080, 0085, 0089, 0164, 0185, 0207,
1376
0048, 0049, 0059, 0083, 0125, 0174,
0492
0083
0048, 0059, 0068
0195
0048, 0068, 0121
0080
0076
0207, 0495
0046, 0048
0080, 0084, 0194, 0279
0047, 0048, 0076, 0080, 0119, 0122,
0164, 1076, 1176, 1276, 1376, 1476
0048, 0059, 0068, 0076, 0085, 0183,
0194, 0207, 0209
0048, 0059, 0068, 0085, 0183, 0194,
0207, 0209
0214
0046, 0059, 0632
0048, 0209
0059, 0068
0048, 0059, 0085, 0089, 0207
0068
0480
0492
0183, 0188
0048
0207
0048, 0207, 0208, 0209, 0265
0076, 0083, 0085, 0183, 0185, 0188,
0200, 0207, 0208
0209
0185
0068, 0122, 0194
0048
0045
0216
0029
0207, 0208, 0209
0200
0209
0029
Anam
0209
Anam National
Audiovox
Baysonic
Belcor
0084
0121, 0209, 0480, 0652
0209
0048
Bell & Howell
Bradford
Brockwood
Broksonic
CXC
0045, 0183
0209
0048
0265, 0492
Onwa
0209
Optimus
Optonica
Orion
Panasonic
Penney
Candle
0059, 0085
Carnivale
Carver
0059
0083
Celebrity
Cineral
0029
0121, 0480
Citizen
0059, 0068, 0085, 0089, 0121, 0309
Clairtone
Concerto
Contec
0214
0085
0209, 0214
Philco
Philips
Pilot
Pioneer
Portland
Prism
Proscan
Proton
Pulsar
Quasar
RCA
Craig
0209
Crosley
0083
Crown
0068, 0209
Curtis Mathes
0045, 0059, 0068, 0076, 0080, 0083,
0085, 0089, 0122, 0174, 0183, 0195,
0480, 0495, 1176, 1376
Daewoo
Daytron
Denon
0048, 0068, 0121, 0480, 0652, 0653
0048
0174
Dumont
Dwin
0046, 0048
0749, 0803
Radio Shack
Realistic
Electroband
Emerson
0029, 0214
0048, 0068, 0183, 0206, 0207, 0208,
0209, 0214, 0265, 0309, 0311, 0492,
0652, 0653
Rhapsody
Runco
SSS
Sampo
Samsung
Samsux
Sansei
Sansui
Sanyo
Envision
Fisher
0059
0183, 0188
Fujitsu
Funai
0208
0200, 0208, 0209
Futuretech
GE
0209
0050, 0076, 0080, 0084, 0122, 0164,
0207, 0311, 0480, 1176, 1376
Gibralter
GoldStar
Gradiente
Grunpy
Hallmark
Harley Davidson
Harman/Kardon
Harvard
Hitachi
Infinity
Inteq
0046, 0048, 0059
0048, 0059, 0085, 0207
0082, 0085
0208, 0209
0207
0208
0083
0209
Scimitsu
Scotch
Scott
Sears
Semivox
Semp
Sharp
Shogun
Signature
Simpson
Sony
Soundesign
Squareview
Starlite
0085, 0174, 0180
0083
0046
JBL
0083
JCB
0029
JVC
0082
KEC
0209
KTV
0059, 0068, 0209, 0214, 0309
Kenwood
LG
0048, 0059
0085
Supreme
Sylvania
Symphonic
TMK
0049, 0059, 0083, 0125
0200
0085, 0206, 0207
0122
LXI
0076, 0083, 0183, 0185, 0207
Logik
Luxman
MEI
0045
0085
0214
Tandy
continued next page...
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
Hughes Network Sys. 0071
Setup Codes For TVs (cont.):
JVC
0037, 0070, 0096
Jensen
0070
Tatung
0084
KEC
0066, 0307
Technics
Technol Ace
Techwood
Teknika
0080, 0279
0208
0080, 0085
0045, 0048, 0068, 0083, 0085, 0089,
KLH
0101
Kenwood
Kodak
0067, 0070, 0096
0064, 0066
LXI
0066
0121, 0179, 0208, 0209
Lloyd’s
Logik
0029, 0237
0101
Telefunken
Toshiba
0085
0089, 0183, 0185
MEI
0064
Tosonic
0214
MGA
0072, 0090, 0269
Totevision
Vector Research
Victor
0068
0059
0082
MGN Technology
MTC
0269
0029, 0269
Magnasonic
Magnavox
Magnin
Marantz
Marta
0307
Vidikron
Vidtech
0083
0048, 0207
0029, 0064, 0068, 0110, 0178, 0592
0269
0064, 0110
0066
Wards
0045, 0048, 0049, 0050, 0059, 0083,
0085, 0125, 0194, 0207, 0208
White Westinghouse 0492, 0652, 0653
Matsushita
Memorex
0064, 0191, 0483
0029, 0064, 0066, 0068, 0075, 0076,
Yamaha
Zenith
0048, 0059
0045, 0046, 0121, 0492
0077, 0133, 0238, 0269, 0336, 1066,
1191, 1291
Minolta
Mitsubishi
Motorola
Multitech
NEC
Nikko
Nikon
Noblex
Olympus
Optimus
0071, 0134
0072, 0077, 0090, 0096
0064, 0077
0029, 0101
0067, 0070, 0096, 0133
0066
0063
0269
Setup Codes For VCRs:
Admiral
Adventura
Aiko
0077, 0238
0029
0307
Aiwa
0029, 0066, 0336
Akai
0070, 0090, 0135
0064
America Action
American High
Asha
0307
0064
0269
0066, 0077, 0133, 0191, 0461, 0483,
1077, 1091, 1191, 1291
0091
0031, 0213, 0238, 0508
0064, 0191, 0254, 0483, 1191
0064, 0066, 0067, 0071, 0083, 0269
0071, 0134
0064, 0238, 0508
0064, 0091, 0110
0066
0096
0049
0269
0089, 0231
0101
Optonica
Orion
Panasonic
Penney
Pentax
Philco
Audiovox
Beaumark
Bell & Howell
Brocksonic
Broksonic
CCE
0066
0269
0133
0238
0031, 0150, 0213, 0238, 0508
0101, 0307
Philips
Pilot
Calix
0066
Canon
0064
Pioneer
Portland
Profitronic
Proscan
Protec
Capehart
Carver
0049
0110
Cineral
0307
Citizen
0066, 0307
Colt
0101
Pulsar
0068
0075
0075
Craig
0066, 0076, 0101, 0269, 0300
Quarter
Quartz
Quasar
RCA
Curtis Mathes
Cybernex
Daewoo
Daytron
Denon
0064, 0070, 0089, 0191
0269
0049, 0074, 0307, 0590
0049
0064, 0191, 0483, 1191
0064, 0071, 0077, 0089, 0134, 0135,
0178, 0231, 0269
0029, 1066
0066
0066
0029, 0064, 0066, 0075, 0076, 0077,
0091, 0133
0063
0068
0071
0074, 0269
0068, 0077
0029, 0070, 0096, 0238, 0300, 0508
0075, 0076, 0133, 0269
0072, 0074, 0150, 0213, 0241
0029, 0064, 0066, 0071, 0075, 0076,
0083, 0133, 0134
0074
0077, 0091
0101
0269
0071
Radio Shack
Radix
Randex
Dynatech
Electrohome
Electrophonic
Emerex
0029
0066
0066
0061
Realistic
Emerson
0029, 0031, 0066, 0072, 0090, 0150,
Ricoh
Runco
STS
Samsung
Sanky
Sansui
Sanyo
Scott
0213, 0237, 0238, 0241, 0307, 0508,
0590
Fisher
0076, 0083, 0133
Fuji
0062, 0064
Funai
0029
GE
0064, 0077, 0089, 0231, 0269
Garrard
0029
Go Video
GoldStar
Gradiente
HI-Q
0461, 0555
0066, 0067
0029, 0037
0076
Sears
Semp
Sharp
Shintom
Shogun
Singer
Sony
Harley Davidson
Harman/Kardon
Harwood
Headquarter
Hitachi
0029
0067, 0110
0101
0101
0075
0029, 0061, 0062, 0063, 0064
0029, 0070, 0071, 0134
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
Century
Citizen
Comtronics
Contec
Eastern
Emerson
Everquest
Focus
Garrard
Gemini
0182
0182, 0344
0069
0048
0031
0826
0044, 0069
0429
0182
0044, 0826
Setup Codes For VCRs (cont.):
Sylvania
Symphonic
TMK
0029, 0064, 0072, 0110
0029
0237, 0269
Tatung
0070
Teac
0029, 0070
Technics
Teknika
0064, 0191
0029, 0064, 0066
Thomas
Toshiba
0029
0072, 0074, 0241
General Instrument 0040, 0305, 0505, 0839
GoldStar
Goodmind
Hamlin
Hitachi
Hytex
0069, 0173
0826
0038, 0049, 0063, 0288
0040
0036
0044, 0182, 0344
0032, 0040, 0041, 0043, 0044, 0305,
0505, 0839
0029
0092
0092
0036, 0048
0050
0029, 0050, 0136
0029
0182
0173, 0562
0429
0029
0029
Totevision
Unitech
0066, 0269
0269
Vector
0074
Vector Research
Video Concepts
Videosonic
Wards
0067
0074, 0090
0269
0029, 0064, 0071, 0076, 0077, 0089,
0091, 0101, 0110, 0178, 0241, 0269
Jasco
Jerrold
Memorex
Movie Time
NSC
White Westinghouse 0238, 0307
XR-1000
Yamaha
Zenith
0029, 0064, 0101
0067
0029, 0062, 0063, 0068, 0238, 0508
Oak
Optimus
Panasonic
Paragon
Philips
Pioneer
Popular Mechanics
Pulsar
Setup Codes For TV/VCR Combos:
American High
Brocksonic
Colt
0064 (for TV use 0080)
0031, 0323,
0101
Quasar
RCA
0050
0044, 0344, 0826
0429
0049, 0288
0031
0040
Curtis Mathis
Daewoo
Emerson
Funai
0064 (for TV use 0080)
0307
0031, 0323, 0508
0029
Radio Shack
Recoton
Regal
Regency
Rembrandt
Runco
SL Marx
Samsung
Scientific Atlanta
Signal
Signature
Sprucer
Starcom
Stargate
Starquest
TV86
GE
0064 (for TV use 0080), 0089 (for
TV use 0076), 0077 (for TV use
0122), 0269
0029
0069
Hitachi
HQ
0064 (for TV use 0080), 0029
0029
0069, 0173
0037, 0046, 0506, 0906
0044, 0069
0040
Lloyds
MGA
0029
0269
Magnavox
0110 (for TV use 0083), 0064 (for
TV use 0080), 0029
0269
0050
0032, 0044
0044, 0069, 0826
0044
0092
0069
0041, 0042
0029
0044
0182
0036
Magnin
Memorex
Mitsubishi
Orion
0066, 0191 (for TV use 0279)
0077 (for TV use 0122)
0031, 0323, 0508
0064 (for TV use 0080), 0191 (for
TV use 0279)
Teleview
Tocom
Toshiba
Tusa
Panasonic
Penney
Quasar
RCA
0064 (for TV use 0080), 0269, 0191
(for TV use 0279)
0064 (for TV use 0080), 0191 (for
TV use 0279)
0089 (for TV use 0076), 0064 (for
TV use 0080), 0077 (for TV use
0122)
Unika
United Artists
Universal
Viewstar
Zenith
0182, 0220
0092
0029, 0554
0429
Zentek
Sansui
Sanyo
0029, 0508
0269
Sears
0029, 0066
Sharp
Sony
Symphonic
Zenith
0077 (for TV use 0122)
0061 (for TV use 0029)
0029
Setup Codes For Satellite/DBS:
AlphaStar
Echostar
0801
0804
0804
0029
Expressvu
General Instrument 0390, 0656, 0898
HTS
Hitachi
Hughes Network Sys. 0778
JVC
0804
0848
Setup Codes For Cable Converters:
ABC
0032, 0036, 0037, 0040, 0042, 0043,
0804
0046
Jerrold
Magnavox
0390, 0656
0751, 0753
Allegro
Archer
Bell & Howell
0182, 0344
0182, 0826
0043
continued on next page...
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
Wards
Yamaha
Yorx
0082, 0186
0065, 0216
0490
Setup Codes For Satellite/DBS
(continued):
Memorex
Next Level
Panasonic
Philips
Primestar
RCA
Radio Shack
Sony
Star Choice
Toshiba
Uniden
0753
0898
0730
Setup Codes For DVD Players:
0751, 0753
0390, 0656
0172, 0421, 0595, 0884
0898
0668
0898
0819
0751, 0753
0885
Harman/Kardon
JVC
Kenwood
Magnavox
Mitsubishi
Onkyo
Panasonic
Philips
Pioneer
0611
0587, 0652
0563
0532
0550
0532, 0656
0519
0532, 0568
0554, 0600
0551
Zenith
Proscan
RCA
0551
Samsung
Sony
0602
0562
0519
0600
0532
0519, 0574
0532, 0620
Setup Codes For CD Players:
Technics
Theta Digital
Toshiba
Yamaha
Zenith
ADC
0047
Aiwa
Burmester
0153, 0186
0449
California Audio Labs 0058
Carver
DKK
0186, 0208, 0466
0029
Denon
Emerson
Fisher
Garrard
Genexxa
Harman/Kardon
Hitachi
JVC
Kenwood
Krell
Kyocera
LXI
0032, 0873
0334
0203, 0208
0422, 0449
0061, 0334
0186, 0202
0061
0101
0057, 0066, 0219, 0655, 0855, 0861
0186
0047
0334
Setup Codes For LD Players:
Denon
0088
Mitsubishi
NAD
0088
0088
Panasonic
Pioneer
Quasar
Sony
0233
0088
0233
0222, 0230
0233
Technics
Linn
0186
MCS
MTC
Magnavox
Marantz
Mission
NSM
Nikko
Onkyo
Optimus
0058
0449
0186, 0334
0058, 0186, 0209
0186
0186
0203
0130, 0868
0029, 0061, 0066, 0174, 0208, 0334,
0449, 0466, 0497
0058, 0332, 0396
0449
0186, 0655
0061, 0273, 0334, 0497
0186
0186
Setup Codes For Tuners/Receivers:
ADC
0560
Aiwa
0150, 0187, 0218, 0434, 1118, 1434
Capetronic
Carver
0560
0071, 0218, 1118, 1218
Casio
0224
Clarinette
Curtis Mathes
Denon
0224
0109
0033, 1133, 1189
Panasonic
Parasound
Philips
Pioneer
Proton
QED
Quasar
RCA
Realistic
Rotel
SAE
STS
Sansui
Sanyo
Scott
Fisher
0071
Garrard
Harman/Kardon
JBL
0492
0139, 0218, 0920
0139
JVC
0103
Kenwood
LXI
0056, 0071, 0215, 1056, 1342, 1598
0210
0058
0082, 0208, 0334, 0793
0208, 0209, 0449
0186, 0449
0186
0047
0186, 0334
0208
0334
0334
0066, 0209, 0890
0209
0029, 0214, 0519, 0633, 0634
0174
0449
Linn
0218
Lloyd’s
0224
MCS
0068
Magnavox
Marantz
Modulaire
NAD
0218, 0224, 0420, 0560, 1118, 1218
0068, 0218, 1118, 1218
0224
0349
Nakamichi
Onkyo
0126
0164
Sears
Sharp
Optimus
0071, 0210, 0215, 0560, 0699, 0767,
Sherwood
Sony
Soundesign
Tascam
Teac
0830, 1052
Panasonic
Penney
Philips
Pioneer
Quasar
0068, 0338
0224
0218, 0420, 1118, 1218
0043, 0109, 0179, 0560, 0659, 1052
0068
0203, 0209, 0422, 0449
0058, 0332
0101
Technics
Victor
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
Setup Codes For Tuners/Receivers
(continued):
Setup Codes For Audio Amplifiers:
Aiwa
0435
Carver
0298
RCA
0083, 0560
Curtis Mathes
Denon
0329
0189
Realistic
Sansui
Sanyo
0210, 0224
0218, 1118
0830
GE
0107
Harman/Kardon
JVC
0921
0360
Sharp
0215
Sherwood
Sony
0520, 0531
0187, 0503, 1087, 1187, 1287
Linn
0298
Magnavox
Marantz
Optimus
Panasonic
Philips
Pioneer
Realistic
Sony
0298
0298
0424
0337
0298, 0921
0042, 0329
0424
0249, 0718
0107
Soundesign
Teac
0699
0492
Technics
Thorens
Victor
0068, 0338, 1337, 1338, 1547
1218
0103
Wards
Yamaha
Yorx
0043, 0083, 0109, 0187, 0218
0205, 0215
0224
Soundesign
Technics
Victor
Zenith
0886
0337
0360
Wards
Yamaha
0042, 0107
0383
Setup Codes For DBS Audio:
Aiwa
JVC
0039, 0188
0102
Jerrold
Scientific Atlanta
Sony
0488, 0549
0489
0039, 0188
0488
Starcom
©1999
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|