Quick start guide
CD181/CD186
Download from Www.Somanuals.com. All Manuals Search And Download.
In call
MENU/OK Enter the option
menu
In idle mode
Enter the option
menu
In menu
Confirm selection
REDIAL/C Enter the redial list Enter the redial list Cancel operation
Increase the volume Enter the
phonebook
Scroll up
Speaker
Decrease the
volume
Recall key*
Enter the call log
Scroll down
Earpiece
Microphone
Make and receive
*network dependent calls
End calls
Turn handset on/off Exit menu/operation
(press and hold)
Mute/unmute the
microphone
Turn the speaker
on/off
Make and receive
calls
Download from Www.Somanuals.com. All Manuals Search And Download.
It displays the connection between
the handset and the base.The more
the bars are shown, the better the
connection is.
Answering machine: it flashes when
there is a new message. It remains
steadily on when the telephone
answering machine is turned on.
If you are using a voice mailbox from
your provider, this icon flashes when
there is a new message.
It remains steadily on when the voice
messages are already viewed in the
call log.
It indicates a received call in the call log.
It indicates an outgoing call in the
redial list.
It flashes when there is a new missed
call.
It remains steadily on when browsing
the missed calls in call log.
The icon is not shown when there is
no voice message.
It flashes when receiving incoming call.
*This is network dependent
It remains steadily on during a call.
It displays when you scroll up/down
a list or increase and decrease the
volume.
The speaker is on.
The ringer is off.
There are more digits on the right.
Press REDIAL/C to read.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect
1
Connect the base station
1 Connect each end of the power adapter to:
• the DC input jack at the bottom of the base station;
• the power socket on the wall.
Telephone
socket
Power
socket
Power
socket
2 Connect each end of the line cord to:
• the telephone socket at the bottom of the base station;
• the telephone socket on the wall.
Power
adapter
2
1
3
Telephone
base station
Extra
handset
charger
For multi-handset version only:
3 Connect each end of the power adapter to:
• the DC input jack at the bottom of the extra handset charger.
• the power socket on the wall.
Download from Www.Somanuals.com. All Manuals Search And Download.
Get started
2
Configure your phone
1 The batteries are pre-installed in the handset. Pull the battery tape off
from the battery door before charging.
2 When using your phone for the first time, you see a welcome
message (country dependent).
After the welcome message, press MENU/OK.
3 Please set the country and language if prompted.
4 Set the date and time.
• If the time is in 12-hour format, press
/
key to select [AM] or
[PM].
Download from Www.Somanuals.com. All Manuals Search And Download.
Charge your phone
Place the handset on the base station to charge the handset.When
the handset is placed correctly on the base station, you hear a docking
sound.
» The handset starts charging.
Note Charge the batteries for 8 hours before first use.
Check the battery level
Charge 8 hours
When the handset is off the base station/charger, the bars
indicate the battery level (full, medium and low).
When the handset is on the base station/charger, the bars
flash until charging completes.
The empty battery icon flashes and you hear an alert tone.
The battery is low and needs recharging.
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy
3
Direct access memory
Call
Phonebook
Add record
1 Press MENU/OK, then select
[PHONEBOOK] > [ADD NEW],
then press MENU/OK to confirm.
2 Enter the name, then press
MENU/OK to confirm.
You have 2 direct access memories
(Keys 1 and 2).To dial the saved phone
number automatically, press and hold
on the keys in idle mode.
• To make a call, press
phone number.
and dial the
when the
• To answer a call, press
phone rings.
Depending on your country, Keys 1
and 2 are preset to [1_VOICEMAIL]
(voice mail number) and [2_INFO
SVC] (information service number)
of your network operator respectively
(network dependent).
• To end a call, press
.
Earpiece volume
3 Enter the number, then press
MENU/OK to confirm.
Press or to adjust the volume
during a call.
Call from the phonebook
1 Press or, press MENU/OK >
[PHONEBOOK] > [VIEW] to
access the phonebook list.
2 Select a contact.
3 Press
to make the call.
Download from Www.Somanuals.com. All Manuals Search And Download.
Call log
Redial list
Record an
1 Press and select a record.
1 Press REDIAL/C and select a record.
announcement
(for CD186 only)
To make a call
To make a call
2 Press
.
2 Press
.
1 Press MENU/OK > [ANSW
MACHINE] >
[ANNOUNCEMENt], then press
MENU/OK to confirm.
2 Select [ANSWER ONLY] or
[RECORD ALSO], then press
MENU/OK to confirm.
3 Select [RECORD NEW], then press
MENU/OK to confirm.
4 Start recording close to the
microphone after the beep.
5 Press MENU/OK to stop recording.
» You can listen to the newly
recorded announcement on the
handset.
To view more details
2 Press MENU/OK.
3 Select [VIEW].
To save a call record to the
phonebook
2 Press MENU/OK.
3 Select [SAVE NUMBER].
4 Press MENU/OK to confirm.
5 Enter the name.
6 Press MENU/OK to confirm.
7 Press MENU/OK to save.
To save a call record to the
phonebook
2 Press MENU/OK.
3 Select [SAVE NUMBER].
4 Press MENU/OK to confirm.
5 Enter the name.
6 Press MENU/OK to confirm.
7 Press MENU/OK to save.
To delete a call record
2 Press MENU/OK.
3 Select [DELEtE] or [DELEtE
ALL].
To delete a call record
2 Press MENU/OK.
4 Press MENU/OK to confirm.
3
Select [DELEtE] or [DELEtEALL]
4 Press MENU/OK to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Register the handsets Restore default
Technical data
Battery
You can register additional handsets
settings
• GP: PH50AAAHC: 2 x AAA NiMH 1.2V
Rechargeable 500mAh batteries
• BYD: H-AAA500A-Z: 2 x AAA NiMH
1.2V Rechargeable 500mAh batteries
to the base station.The base station
You can reset your phone settings
can register up to 4 handsets.
to the original factory settings.
1 Press MENU/OK.
2 Select [SERVICES] >
[RESEt], then press
MENU/OK to confirm.
» The handset displays a
1 Press MENU/OK on the
handset.
2 Select [SERVICES] >
[REgIStER], then press
Adapter
Base and charger:
MENU/OK to confirm.
• Philips:
3 Press and hold
on the base
SSW-1920EU-2/SSW-1920UK-2/
S003PV0600050/S003PB0600050:
Input: 100-240V 50/60Hz 0.2A;
Output: 6V 500mA
confirmation request.
3 Press MENU/OK to confirm.
» All settings are reset
station for 5 seconds.
Enter the system PIN (0000).
Press MENU/OK to confirm
the PIN.
4
5
» The welcome screen displays.
» Registration is completed in
less than 2 minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
I cannot change the settings of
my voice mail, what do I do?
The voice mail service is managed by
your service provider but not the phone
itself. Contact your service provider to
change the settings.
No display
Frequently asked
questions
• Ensure the batteries are charged.
• Ensure there are power and phone
connections.
No signal bar displays on the
screen.
Bad audio (crackles, echo, etc.)
• The handset is nearly out of range.
Move it closer to the base station.
• The phone receives interference from
the nearby electrical appliances. Move
the base station away from them.
• The handset is out of range. Move it
closer to the base station.
• If the handset displays
[UNREgIStERED], put the handset
on the base until the signal bar
appears.
The handset on the charger
does not charge.
• Ensure the batteries are inserted
correctly.
• Ensure the handset is placed properly
on the charger.The battery icon
animates when charging.
• Ensure the docking tone setting is
turned on.When the handset is placed
correctly on the charger, you can hear
a docking tone.
• The charging contacts are dirty.
Disconnect the power supply first and
clean the contacts with a damp cloth.
• Batteries are defective. Purchase new
ones from your dealer.
• The phone is at a location with thick
walls. Move the base away from them.
If I fail to register the additional
handsets to the base station,
what do I do?
Your base memory is full. Unregister the
unused handsets and try again.
The handset does not ring.
Ensure the handset ringtone is turned on.
The caller ID does not display.
• The service is not activated. Check
with your service provider.
• The caller’s information is withheld or
unavailable.
No dialing tone
• Check your phone connections.
• The handset is out of range. Move it
closer to the base station.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to Philips
Register your product at www.philips.com/welcome
Need help?
User manual / Online help
Reproduction in whole or in part is prohibited without the written
consent of the copyright owner.
Trademarks are the property of Koninklijke Philips Electronics N.V. or
their respective owners.
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
0168
QSG_CD181-186_05_EN_V3.0
WK10465
Download from Www.Somanuals.com. All Manuals Search And Download.
|