CONTENTS
1. CONNECTING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . 4
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting a decoder or other equipment . . . . . . . . . . . . 5
Programming a recording (without ’VIDEO Plus+’) . . . . 21
Programming a recording with TELETEXT . . . . . . . . . . . 22
Automatic recording from a satellite receiver (SAT
RECORDING) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
How to check or change a TIMER . . . . . . . . . . . . . . . . . . 24
2. INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . . 6
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 8. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 25
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 7
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 8
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 8
Searching for new TV channels . . . . . . . . . . . . . . . . . . . . . 8
Allocating a channel number . . . . . . . . . . . . . . . . . . . . . . . 9
Delete a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Changing the TV system . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Switching the On-screen display (OSD) on or off . . . . . 25
Switching to 16:9 wide screen picture . . . . . . . . . . . . . . 26
Switching the internal speakers on or off . . . . . . . . . . . . 26
Sound playback without picture . . . . . . . . . . . . . . . . . . . . 27
Switching the remote control command . . . . . . . . . . . . . 27
Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . . 28
Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . . 28
3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . 12
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . . 12 9. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 29
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4. TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting the picture setting (SMART PICTURE) . . . . . . 14
Switching Incredible Surround on or off . . . . . . . . . . . . . 15
Selecting a preset sound setting (SMART SOUND) . . . 15
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . . 15
Sound track selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Playing an NTSC cassette . . . . . . . . . . . . . . . . . . . . . . . . . 17
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Searching for tape position with the picture (picture
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Searching for tape position without the picture (wind
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Automatic search for a tape position (index search) . . 18
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 18
6. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Recording without automatic switch-off . . . . . . . . . . . . 19
Recording with automatic switch-off (OTR
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 19
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 20
’VPS’ (Video Programming System) and ’PDC’
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 20
Programming a recording (with ’VIDEO Plus+’) . . . . . . . 20
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS IN BRIEF
The remote control
y
Volume off: To switch the volume on or off
z
Previous programme number: To select the previous programme number
TELETEXT e TELETEXT: To switch TELETEXT on or off
PLAY G Playback : To play a recorded cassette
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made
STANDBY m Switch off : To switch off set, interrupt menu
function, interrupt a programmed recording
(TIMER)
H
SURROUND Surround Sound : To switch Surround Sound
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning
on/off
SMART SMART PICTURE : To call up preset picture
INDEX E Index search: In combination with
H
/
I
: to search for previous/next recording
settings
on the cassette
SMART # SMART SOUND : To call up preset sound
RECORD/OTR n Record: To record the programme selected
settings
STILL R Still picture: To stop the tape and show a still picture
AUDIO Audio : To select the required sound track
0-9 Number buttons: 0 - 9
Coloured TELETEXT buttons:To select TELETEXT page directly
nred To select page/chapter shown in red at the bottom of the screen
ngreen To select page/chapter shown in green at the bottom of the screen
nyellow To select page/chapter shown in yellow at the bottom of the screen
nblue To select page/chapter shown in blue at the bottom of the screen
CLEAR Delete : To delete last entry or clear
programmed recording (TIMER)
CLEAR TELETEXT: To select TELETEXT info page 100
TIMER s TIMER: To make a manual TIMER
programming or to alter or clear a
programmed TIMER
MENU Menu : To call up or end main menu
OK Store/Confirm: To store or confirm entry
D
C
Select: Cursor left
Select: Cursor right
Select: One line up
Select: One line down
A
B
qSr Volume: To regulate the volume
qP r Programme number: To select a programme
number up or down
Download from Www.Somanuals.com. All Manuals Search And Download.
Front of the set
AUDIO L/R Audio input socket left/right stereo
VIDEO Video input socket : To connect a camcorder or videogames
w
Headphones socket: To connect headphones
Back of the set
8
Power switch : To switch off the machine
Beware: If you switch off with the power switch, TIMER-recordings are not possible!
2
Aerial input socket: To connect the aerial cable
AUDIO OUT L/R Audio output, left/right stereo: To connect active speakers, a HiFi-set or a ’Dolby Prologic’-decoder.
EXT. 1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
EXT. 2 Scart socket: To connect a satellite receiver, video recorder, camera recorder etc.
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
P r/q Programme number : To select programme number up or down
Sr/qx Volume: To regulate the volume, to switch on the automatic recording from a satellite receiver
H
I
5
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
Record: To record the programme selected
G
Playback : To play a recorded cassette
?
Pause/Stop: To stop the tape, except while a TIMER-recording is being made
Download from Www.Somanuals.com. All Manuals Search And Download.
Special functions on your TV-VIDEO Combi
If a TV channel which transmits TXT/PDC is stored under programme number
’P01’, time and date will automatically be taken from the TXT/PDC information.
Crystal Clear video has become the synonym for outstanding picture quality
combining Philips’ very latest technologies: Natural Colour, Studio Tracking
System, Digital Studio Picture Control and laser-cut video heads.
Philips has developed a system which produces the best possible playback
quality. It reduces disturbance on old, worn video cassettes, and emphasises
the detail on very good quality cassettes.
This function allows you to save the playback settings that suit you best. Select
your own personal settings for the type of film you are currently watching.
This function allows you to save the sound settings that suit you best. Select
your own personal settings for the type of film you are currently watching.
When you have plugged your TV-VIDEO Combi into the mains, you will be
welcomed with an OSD picture. All you have to do is follow the instructions in
the "intelligent help line" for the next step. Enjoy the Automatic TV channel
search/save function and the automatic time adjustment.
Automatic Volume Leveller. This prevents a sudden increase of the volume, for
example, during commercials.
Incredible Surround is the newest sound-improvement system from Philips. This
feature gives the acoustic impression of a very wide stereo effect even if the
speakers are located relatively close together.
Simple programming system for TV-VIDEO Combis. Makes programming as easy
as making a telephone call. Simply enter the programme code which you will
find in your listings magazine.
The precision tape drive from Philips with a rewind time of 100 seconds (E180)
and automatic tape length recognition.
By using the information stored in the Teletext pages you can programme
recordings on the TV-VIDEO Combi in just a few convenient steps.
One Touch SAT Recording is the new ease-of-use solution for TV-VIDEO Combis
to record programmes from your SAT receiver in a convenient way.
Your TV-VIDEO Combi has been equiped with two tuners. This enables you to
watch a programme while you are recording another programme.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. CONNECTING YOUR TV-VIDEO COMBI
Important for the United Kingdom
Connecting the cables
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS1362 5A, A.S.T.A. or
BSI approved type.
c Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
a Insert the aerial plug into the 2 socket.
DNote: * The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.
b Insert the plug of the mains cable into the wall socket.
c If the little red light at the front panel of the set is not lit,
please switch on the set. The power switch 8 is
located on the left side panel of the set.
How to connect a plug:
The wires in the mains lead are coloured in accordance with
the following code:
BLUE - ’NEUTRAL’ (’N’)
BROWN - ’LIVE’ (’L’)
d The BLUE wire must be connected to the terminal which
is marked with the letter ’N’ or coloured BLACK.
e The BROWN wire must be connected to the terminal
which is marked with the letter ’L’ or coloured RED.
f Do not connect either wires to the earth terminal in the
plug which is marked with the letter ’E’ or by the safety
earth symbol \or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not imply over the
two wires.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a decoder or other equipment
You can also connect additional equipment. For instance, a
satellite receiver, decoder or camcorder to EXT. 1 or a
satellite receiver, or camcorder to EXT. 2 .
E If you don’t connect a decoder, use the EXT. 1 socket for
connecting other equipment.
You can connect a HiFi-stereo set or a ’Dolby Prologic’
decoder to the socket AUDIO OUT L/R (audio output left/right).
DIf you want to switch off the internal speakers please
read chapter ’ADDITIONAL FUNCTIONS’, paragraph
’Switching the internal speakers on or off’.
DIf you want to switch off the internal speakers please
read chapter ’ADDITIONAL FUNCTIONS’, paragraph
’Switching the internal speakers on or off’.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INSTALLING YOUR TV-VIDEO COMBI
Initial installation
Allocating a decoder
a Open up the battery compartment of your remote control
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
and place the batteries in it as shown in the picture.
a Select the TV channel for which you want to use the
decoder with the qP r button on the TV-VIDEO Combi
or the number buttons 0-9 on the remote control.
b Press the MENU button on the remote control. The main
b Close the battery compartment.
menu will appear.
c If you have connected the aerial to the TV-VIDEO Combi,
c Select the line ’Installation’ with the B or
press the OK button.
A buton and confirm with the C button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
d Select the line ’Manual store’ with the B or
A button and confirm with the C button.
e Select the line ’Decoder’ with the B or A button.
Searching...
CHANNELS FOUND:
MANUAL STORE
Channel/Frequency
TV system
FREQU.
PAL-BG
123
//////,,,,,,,,,,,,,,,,,,,,,
Search
Fine tuning
Name edit
Programme number
Decoder
(,,,,=,,,,$
xxx
01
OFF
ON
NICAM
ã
«
Exit:
press MENU
Wait until all TV channels have been found. This can take
several minutes.
DIf you have connected a decoder, you must install it
f Select function ’ON’ with the D or C button. When
as described in the next section.
you select ’OFF’, the function will be switched off.
DIf you have connected a satellite receiver, please
g Confirm with the OK button.
read the section ’satellite receiver’.
h To end, press the MENU button.
Your decoder has now been allocated to this TV channel.
i Press the MENU button again.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Manual store’.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
i If you want to change the automatic tv channel setting,
select the line ’Fine tuning’.
Manual TV channel search
With the D or C button you can vary the automatic tv
channel setting. Important: This re-tuning is only
necessary and useful in special cases, e.g.: when there
are stripes on the picture with cable-TV systems.
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
j Press the OK button to store the TV channel.
menu will appear.
DIf you want to search for further TV channels, start
b Select the line ’Installation’ with the B or
again at step e.
A button and confirm with the C button.
k To end, press the MENU button.
c Select the line ’Manual store’ with the B or
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Manual store’.
A button and confirm with the C button.
MANUAL STORE
Channel/Frequency
TV system
FREQU.
PAL-BG
123
Satellite receiver
Search
Fine tuning
Name edit
Programme number
Decoder
(,,,,=,,,,$
xxx
01
OFF
ON
You can receive channels from the satellite receiver via the
scart socket EXT. 1 .
NICAM
To do this, select the channel number ’E1’ with the qP r
button. You will have to select the channels to be received by
the satellite receiver on the receiver itself.
ã
«
Exit:
press MENU
d In the line ’Channel/Frequency’, select the
display for:
’FREQU.’: frequency
’C CH’: channel
’S CH’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Search’ with
the digit buttons 0-9 .
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the C button to start
the channel search.
f In the line ’Programme number’ select the
programme number you want e.g.: ’01’, using the D or
C button.
g If you want to change the TV channel name, press the
C button in line ’Name edit’.
E Select the character you want to change with the D or
the C button. Change the character with the B or the
A button. Select the next character in the same way.
E To confirm the information, press the OK button.
h In the line ’NICAM’, select funtion ’ON’ or ’OFF’ with
the C or D button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DAutomatic Channel Installation:
Special installation functions
Some cable companies or broadcasters offer the
possibility to install TV channels automatically with ’ACI’.
Information about the installation offered and how to
select it, will appear on the screen.
You can select one of the following installation functions in
order to adapt your TV-VIDEO Combi to your own specific
requirements.
This set will recognize and install TV channels with ’ACI’
automatically.
TV channels will be stored from programme number 1
onward.
If ’ACI’ cannot identify a TV channel, you can search for it
using the method as described in the section ’Manual TV
Channel Search’.
Automatic TV channel search
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a Press the MENU button on the remote control. The main
menu will appear.
Searching for new TV channels
b Select the line ’Installation’ with the B or
A button and confirm with the C button.
a Press MENU . The main menu will appear.
c Select the line ’Autoinstall’ with the B or
A
button.
b Select the line ’Installation’ with the B or
A button and confirm with the C button.
d Press the C button. The ’Automatic TV channel search’
starts.
c Select the line ’Add new channels’ with the
B or A button and confirm with the C button.
Channel search will start.
d To store the TV channel, press OK .
Searching...
CHANNELS FOUND:
e Repeat step d, until you have found all desired TV
channels.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you cannot select
the function ’Add new channels’.
//////,,,,,,,,,,,,,,,,,,,,,
e When the TV channel search is complete,
’Installation comp.’ will appear on the
screen.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
DIf you have programmed a recording (TIMER), a wake-up
timer or a sleep-timer, you can’t select the function
’Autoinstall’.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Allocating a channel number
Delete a TV Channel
a Press the MENU button. The main menu will appear.
a Press the MENU button. The main menu appears.
b Select the line ’Installation’ with the B or
b Select the line ’Installation’ with the B or
A button and confirm with the C button.
A button and confirm with the C button .
c Select the line ’Sort channels’ with the B or
c Select the line ’Sort channels’ with the B or
A button and confirm with the C button.
A button and confirm with the menu button C .
SORT CHANNELS
SORT CHANNELS
01 zzz
02 yyy
03 xxx
04 aaa
05 bbb
06 ccc
01 zzz
02 yyy
03 xxx
04 aaa
05 bbb
06 ccc
ã
«
Exit:
press MENU
To move:
press OK
ã
«
Exit:
press MENU
To move:
press OK
d With the B , A , D or C button, select the TV
channel to which you want to allocate a programme
number and press the OK button.
d With the B , A , D or C button, select the TV
channel you want to delete and press the CLEAR button.
e Repeat step d, until you have deleted all the required
e With the B , A , D or C button, shift the TV
channel to the programme number you wish to allocate to
this TV channel and press the OK button.
TV channels.
f To end, press the MENU button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Sort channels’.
f Repeat steps dto euntil you have allocated a
programme number to all the required TV channels.
g To end, press the MENU button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Sort channels’.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the language
Setting the time and date
You can select the language for the on-screen display (OSD).
a Press the MENU button on the remote control. The main
menu will appear.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the buttons
B or A and confirm with the button C .
c Select the line ’Set clock’ with the B or
A
button and confirm with the C button.
MAIN MENU
Picture
Sound
Setup
Tape
Installation
SET CLOCK
Time
15:36
2000
06
ã
«
Exit:
press MENU
Year
Month
Date
Smart clock
08
ON
b Select the line ’Installation’ with the B or
ã
«
Exit:
press MENU
A button and confirm with the C button.
d Check the time in line ’Time’. If required, please change
the time with the 0-9 buttons on the remote control.
INSTALLATION
Add new channels
Sort channels
Autostore
Manual store
Set clock
e Check ’Year’, ’Month’ and ’Date’ in the same way.
You can switch between entry fields with B or
A
button. Confirm with the OK button.
Language
ENGLISH
f To end, press the MENU button.
ã
Exit:
press MENU
«
c Select the line ’Language’ with the B or
A
button.
d Select your language with the D or C button.
e To end, press the MENU button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic time and date setting
(SMART CLOCK)
DIf a television programme, which transmits TELETEXT, is
stored with programme number ’P01’, time and date will
be set automatically.
DThe time will automatically be adjusted to winter time and
summer time.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the buttons
B or A and confirm with the button C .
c Select the line ’Set clock’ with the B or
A
button and confirm with the C button.
d Select the line ’Smart clock’ with the menu buttons
B or A .
e Switch the function on with the menu buttons D or
C .
f Confirm with the OK button.
g To end, press the MENU button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3. IMPORTANT NOTES FOR OPERATION
SUMMARY OF USER GUIDE
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.
PICTURE
MAIN MENU
Brightness
Colour
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
NATURAL
OFF
Picture
Sound
Contrast
Sharpness
Tint
Setup
Tape
Contrast Plus
Store as pref.
Installation
NO
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
Chapter ’TV FUNCTIONS’
User guide (OSD)
SOUND
The OSD (On-screen display) shows the various functions in
the form of a menu on the television screen. You can then
choose the settings you require. There is a summary of the
menus on this page. The main button functions are displayed
in a help line along the bottom of the screen.
Volume
(,,,,,,,,,
(,,,,=,,,,$
(,,,,=,,,,$
(,,,,=,,,,$
NEUTRAL
Balance
Bass
Treble
Sound mode
Surround
OFF
Auto volume cont.
Store as pref.
ON
NO
E To call up the menu: With the MENU button.
E To select a line: With the B or A button.
E To select within a line: With the D or C button.
ã
«
Exit:
press MENU
Chapter ’TV FUNCTIONS’
E To enter or change your selection: With the 0-9 , D or
C button.
E To enter or change your selection in the TIMER entry
SETUP
columns: With the B or A button.
Parental control
OFF
MAX
NORMAL
ON
E To cancel: With the MENU button.
E To save: With the OK button.
E To confirm: With the C button.
E To exit the menu: With the MENU menu button.
Display
Format 16:9
Speakers
Sound only
VCR 1/2
ON
VCR
1
ã
«
Exit:
press MENU
Chapter ’ADDITIONAL FUNCTIONS’
TAPE
Tape speed
Tape counter
Repeat play
Video system
Jitter
SP
LEFT
OFF
AUTO
(,,,,=,,,,$
(,,,,=,,,,$
E To confirm the messages in red on the screen: Press the
OK button.
Tracking
Cleaning
E You can switch the machine on with the qP r ,
z
ã
«
Exit:
press MENU
or 0-9 button or by putting in a cassette.
Chapter ’PLAYBACK FUNCTIONS’
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes for operation
E We suggest that, from now on, you switch off your
TV-VIDEO Combi with the STANDBY m button on the front
of the set or on the remote control.
When the set is in the standby mode, a small red lamp at
the front of the set will be alight.
E You can switch on with the qP r or z button, the
0-9 buttons or by inserting a cassette.
AAttention: If you use the power switch 8 on the side
panel, you switch off the set completely from the mains
power supply. No programmed recordings will then be
made. The red lamp at the front of the set will not be
alight. After some time, the date and clock settings will be
lost.
We advice you to keep your TV-VIDEO Combi connected
to the mains at all times to ensure that programmed
recordings can be made and that the television works
normally. The power consumption will be low.
E Attention: If you switch off the appliance with the power
switch 8 , make sure that you have removed the tape
by pressing the ? button.
E If you diconnect your TV-VIDEO Combi from the mains,
TIMER and channel information will remain stored for
about 1 year and clock information will remain stored for
30 minutes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. TV SET FUNCTIONS
Selecting a TV programme
Selecting the picture setting
(SMART PICTURE)
Select the required TV channel (=programme number) with the
qP r button or with the digit buttons 0-9 on the remote
control.
D’SMART PICTURE’: Optimises all picture settings using a
single button on the remote control.
E Press the SMART button repeatedly to select the
DIf you don’t know the programme number of the required
required picture setting.
TV channel:
a Press the qP r button for more than 2 seconds.
The TV channel list appears on the screen.
Volume control
b Select the required TV channel with the qP r
button.
You can control the volume level with the qSr button.
If you want to mute the sound temporarily (e.g.: during a
telephone call), press the y button on the remote control.
When you press the y button again, the sound will return at
its original volume level.
After 1 second the TV-VIDEO Combi will switch to
the selected programme number.
Picture settings
a Press the MENU button. The main menu appears.
b Select the line ’Picture’ with the menu buttons
B
or A and confirm with the menu button C .
PICTURE
Brightness
Colour
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
NATURAL
OFF
Contrast
Sharpness
Tint
Contrast Plus
Store as pref.
NO
ã
«
Exit:
press MENU
c Select the required line with the menu buttons B or
A and alter with the menu buttons D or C .
D’Contrast Plus’: Enhances TV contrast by whitening
the white and blackening the black.
DTo store this setting as a standard setting, select the
line ’Store as pref.’ with the menu buttons
B or A . Select ’YES’ and confirm with the
OK button.
DTo call up the standard settings, switch the set off
and on again or select ’Smart Picture’ setting
’Personal’.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound settings
Selecting a preset sound setting (SMART
SOUND)
You can select between several sound settings, to meet your
personal sound preferences.
D’SMART SOUND’: provides a choice of sound settings
from the remote control.
E Press the SMART # button repeatedly to select the
a Press the MENU button. The main menu appears.
desired sound setting.
b Select the line ’Sound’ with the B or A button and
DIf the Surround function is switched on, ’Smart Sound’
confirm with the C button.
will be switched to ’Manual’.
Automatic volume control (AVL)
SOUND
E Switch on ’Auto volume cont.’, to activate the
automatic volume control. This will minimise sudden
changes in TV volume, e.g. when commercial spots are
being transmitted or when switching TV channels.
Volume
(,,,,,,,,,
(,,,,=,,,,$
(,,,,=,,,,$
(,,,,=,,,,$
NEUTRAL
Balance
Bass
Treble
Sound mode
Surround
OFF
DThe AVL function will only affect the internal speakers.
Auto volume cont.
Store as pref.
ON
NO
ã
«
Exit:
press MENU
Sound track selection
c Select the required line with the B or A button and
You can select the required sound track. This is of particular
interest when audio transmissions are multilingual.
alter with the D or C button.
E In the line ’Sound mode’ select one of these options:
E Press the AUDIO button to select one of the following
’NEUTRAL’: neutral sound setting
options:
’LOUDN.’: when the volume level is low, high and low
sound will be emphasized.
’SPATIAL’: spacious stereo effect
STEREO transmissions: ’Stereo’ and ’Mono’
Multilingual transmissions: ’Dual I’ and ’Dual II’
DTo store a setting as a standard setting, select the
line ’Store as pref.’ with the B or
button. Select ’YES’ and confirm with the OK
button.
A
DWhile a tape is playing, you can also select one of the
following modes: ’Left’, ’Right’, ’Mix’. In the ’Mix’
mode you can play the mono sound of the normal (linear)
audio track together with the sound of the stereo audio
track. You can play cassettes that have been dubbed on
another video recorder.
DTo call up the standard settings, switch the set off
and on again or select ’Smart Sound’ setting
’Personal’.
Switching Incredible Surround on or off
a To switch on the ’Incredible Surround’ effect, in the line
’Surround’ select ’ON’ with the D or C button.
E You can always simply switch the function on or off with
the SURROUND button on the remote control.
DIf Surround Sound is switched on, the line ’Sound
mode’ in the Sound menu will be deactivated.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read TELETEXT
E Press the TELETEXT e button to switch the TXT decoder
on and off. The TV-VIDEO Combi is now receiving the TXT
of the TV channel currently selected.
E To store the current page as preferred page, press the
OK button.
The next time you call up TELETEXT, you will
automatically turn to this page.
E If you want to select an other page, type in the number of
the page with the digit buttons 0-9 . With the colour
buttons on your remote control you can directly select
the page numbers shown at the bottom of the TV screen.
Extra TELETEXT functions
To use the extra TELETEXT functions, press the MENU button,
when you are in TELETEXT.
E To enlarge the print, select the symbol ’g’ and confirm
with the OK button.
E To switch off the TELETEXT decoder temporarily, select
the symbol ’d’ and confirm with the OK button.
E To call up a TELETEXT sub-page:
a Select the symbol ’}’ and confirm with the OK
button.
b Enter the page number of the sub-page with the
0-9 -buttons (e.g.: 0123).
E To call up concealed information, select the symbol ’b’
and confirm with the OK button.
E To stop the pages from being turned over, select the
symbol ’f’ and confirm with the OK button.
E To show TELETEXT transparently, select the symbol ’-’
and confirm with the OK button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. PLAYBACK FUNCTIONS
Playing a cassette
Searching for tape position with the picture
(picture search)
a Put a cassette into the cassette slot.
a While a cassette is playing, press the H (reverse) or
b Press the PLAY G button.
I (forward) button once or several times.
E If you press the STOP h button once, the TV-VIDEO
Combi will switch to pause. To stop, press the STOP h
button again.
b To stop at a certain picture, press the PLAY G button.
DDuring picture search, the picture quality may not be
E To eject the cassette, press the ? button on the
TV-VIDEO Combi or press the STOP h button on the
remote control several seconds.
so good and there will be no sound.
Still picture
DBefore transportation, make sure that no cassette is
a Press the STILL R button. A still picture will appear on
in the TV-VIDEO Combi.
the screen.
DIf you insert an erase protected cassette, the
TV-VIDEO Combi will automatically start playback.
b Each time you press STILL R again, the picture will
move on one step.
DSome hired cassettes may have poor picture or
sound quality. This is not a fault in your machine.
Please read ’Eliminating picture interference’.
Slow motion
DSome functions will automatically switch off after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.
a Press the STILL R button. A still picture will appear on
the screen.
b When you hold the STILL R button, the tape will be
played in slow motion.
Playing an NTSC cassette
c When you press the I button several times, you have
a choice of several playback speeds.
With this set you can play cassettes that have been recorded
on another video recorder in the NTSC standard (for example,
American cassettes).
During slow motion there will be no sound.
DSome special features (for example, still picture) are not
Searching for tape position without the
picture (wind and rewind)
possible while you are playing an NTSC cassette.
a Stop the tape with the STOP h button.
Tape position indication
b Press the H (reverse) or I (forward) button.
c To stop at a certain picture, press the STOP h button.
DPress the OK button to display the current tape position.
DTo change the type of tape position display, proceed as
follows:
Instant View
a During playback, press the MENU button.
With this function you can switch to picture search during
wind and rewind.
b Select the line ’Tape’ with the menu buttons B or
A and confirm with the C button.
a If you hold the H (rewind) or I (wind) button
c Select the line ’Tape counter’ with the menu
during wind or rewind, you will switch to picture search.
buttons B or A .
d With the menu buttons D or C select ’USED’ to
check the time used, or ’LEFT’ to check the time left on
the tape.
b When you release the button, the TV-VIDEO Combi will
automatically switch back to rewind or wind.
e Confirm with the OK button.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
e Confirm with the OK button.
Automatic search for a tape position (index
search)
f To end, press the MENU button.
DPlease note, however, that interference may still
At the start of each recording, the TV-VIDEO Combi will write
an index code on the tape.
occur with poor quality cassettes.
Cleaning the video heads
a Press the INDEX E button. Press the I button to
select the next code mark or the H button for the
previous code mark.
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
b When the TV-VIDEO Combi finds the code mark, it will
automatically switch to play.
Picture interference
When the picture quality is poor when you play a cassette,
please follow these instructions.
Tracking during playback
a During playback, press the MENU button.
a During playback, press the MENU button.
b Select the line ’Tape’ with the buttons B or A and
confirm with the C button.
b Select the line ’Tape’ with the menu buttons B or
A and confirm with the C button.
c Select the line ’Tracking’ with the buttons B or
A .
c Select the line ’Cleaning’ with the menu buttons
B or A .
d Hold the buttons D or C until the playback quality is
at its best.
d Press the OK button. ’CLEANING’ appears on the
screen.
e Confirm with the OK button.
e Wait a few seconds, until the message disappears and
f To end, press the MENU button. This setting will remain
then press the MENU button.
until you remove the cassette.
Tracking during still picture
If the still picture vibrates vertically, you can improve the still
picture as follows:
a During still picture, press the MENU button.
b Select the line ’Tape’ with the B button or A and
confirm with the C button.
c Select the line ’Jitter’ with the B or A button.
d Hold the D or C button until the picture quality is at
its best.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
6. MANUAL RECORDING
Use ’Manual Recording’ to make a spontaneous recording (for
example, a programme currently being shown).
Protecting your recordings
E If you want to start and stop a recording manually, read
So that you don’t accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
the section: ’Recording without automatic switch-off’.
E If you want to start a recording manually but have it
stopped automatically, read the section: ’Recording with
automatic switch-off’.
Auto-assembling
Recording without automatic switch-off
a Insert a cassette.
You can use the auto-assembling function to join individual
recordings without any major picture disturbance between
them.
b Use the qP r button to select the programme number
you want to record, for example, ’P01’.
a While the cassette is playing, search for the correct
DProgramme number ’E1’ is provided for recording
position on the tape.
from external sources (via the EXT. 1 scart socket).
DProgramme number ’AV’ is provided for recording
from external sources (via the Audio/Video socket
AUDIO L/R at the front of the TV-VIDEO Combi).
b Stop the cassette by pressing the STOP h button.
’Pause’ will appear on the TV screen.
c Now start recording as usual by pressing the
c To start recording, press the RECORD/OTR n button on the
remote control or 5 on the TV-VIDEO Combi.
RECORD/OTR n button on the remote control.
When you are recording, the red recording light at the
front panel of the TV-VIDEO Combi will be lit.
Selecting the recording speed (SP or LP)
d Stop recording with the STOP h button.
DIf you want to switch off the screen while recording,
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
press the STANDBY m button once .
DTo switch the screen back on again, press the
qP r button.
a Press the MENU button. The main menu appears.
DDuring a recording you can watch other TV
b Select the line ’Tape’ with the B or A button, and
channels.
confirm with the C button.
c Select the line ’Tape speed’ with the B or
A
Recording with automatic switch-off
(OTR one-touch-recording)
button.
d Select the required recording speed with the D or
C button.
a Put a cassette in the machine.
D’LP’: Long Play = half recording speed (double
b Use the qP r button to select the programme number
recording time).
you want to record.
’SP’: Standard Play = normal recording speed.
c Press the RECORD/OTR n button on the remote control.
When you are recording, the red recording light at the
front panel of the TV-VIDEO Combi will be lit.
DThe picture quality will be adversely affected when
recording at half recording speed (’LP’).
DFor playback, the correct recording speed will
d Press the RECORD/OTR n button again and again until the
display on the TV-VIDEO Combi shows the desired end
time or length of the recording.
automatically be selected.
e Confirm with the OK button.
DTo cancel this information, press the CLEAR button.
e Confirm with the OK button.
f To end, press the MENU button.
f To end, press the MENU button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7. PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
c Enter the entire PlusCode programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
If you make a mistake, you can clear your instructions
with the CLEAR button.
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* VPS/PDC on or off
* the recording speed (SP/LP).
ShowView
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
CODE
REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1
2
3
4
5
6(
(
(
ONCE
0-9
Store:
press OK
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
d In line ’REPEAT’ select the kind of programming
required with the B or A button.
With ’VPS’ and ’PDC’, the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
’ONCE’: recording only once
’Mo-Fr’: recordings every day from Monday to Friday.
’Mo-Su’: recordings every day from Monday to Sunday.
’WEEKLY’: recordings every week on the same day of
the week.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
e Confirm with the OK button. Your programming details
will then appear on the TV screen.
Programming a recording
(with ’VIDEO Plus+’)
TIMER PROGRAMMING
VPS
DATEPROG. START END
PDC REP.
All the information required for a programming is contained in
the PlusCode programming number.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx
15:36 15:50
*
ONCE
ã
«
Exit:
press TIMER
Start:
press
è
a Press the TIMER s button on the remote control.
DIf VIDEO Plus+ does not recognise the TV channel,
’P??’ will appear on the TV screen. Instead of
’P??’, you can select the programme number you
want with the number buttons 0-9 .
b Select the line ’VIDEOPlus’ with the B or
A
button and confirm with the C button.
DIf ’Code error’ appears on the TV screen, this
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the TIMER s button.
DIf ’Daily error’ appears on the TV screen, the
date was incorrectly entered.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DUnder ’VPS/PDC’, use the B or A button to
c Press the C button.
switch ’VPS or PDC’ on or off.
DUnder ’LP’, use the B or A button to select the
TIMER PROGRAMMING
recording speed ’SP’ or ’LP’.
VPS
DATEPROG. START END
PDC REP.
DThe TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx
15:36 15:50
*
ONCE
DWhen you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
ã
«
Exit:
press TIMER
Start:
DIf the end of the cassette is reached during a
recording, the TV-VIDEO Combi will automatically
eject the cassette.
press
è
d Select the entry field with the D or C button.
DIf you forgot to insert cassette, ’No cassette’
will appear.
e Enter information with the menu buttons B or A or
DIf you have inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
with the digit buttons 0-9 .
DUnder ’REP.’, use the B or A button to select
daily or weekly programming.
’ONCE’: Recording only once.
f Press the OK button.
’Mo-Fr’: Recording from Monday to Friday.
’Mo-Su’: Recording from Monday to Sunday.
’WEEKL’: Recording every week on the same day.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
DUnder ’VPS/PDC’, use the B or A button to
switch ’VPS or PDC’ on or off.
h To end, press the TIMER s button.
DUnder ’LP’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
Programming a recording
(without ’VIDEO Plus+’)
f Press the OK button.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
h If you have confirmed with the OK button, exit the menu
menu buttons B or A and confirm with the
C
with the TIMER s button.
button.
E The programming information has been stored in a TIMER
block.
TIMER PROGRAMMING
i Make sure that the cassette you have put in can be
VPS
DATEPROG. START END
PDC REP.
recorded on.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
--
--
--:-- --:--
-
-----
ã
«
Exit:
press TIMER
Start:
press
è
21
Download from Www.Somanuals.com. All Manuals Search And Download.
g For changing the timer information, select the entry field
with the D or C button. Change the information with
the B or A button or with the number buttons 0-9 .
Programming a recording with TELETEXT
With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want record. All the required information for
recording will be transferred and stored in a TIMER block. You
can find more information on TELETEXT in the chapter ’TV SET
FUNCTIONS’.
DUnder ’REP.’, use the B or A button to select
daily or weekly programming.
’ONCE’: Recording only once.
’Mo-Fr’: Recording from Monday to Friday.
’Mo-Su’: Recording from Monday to Sunday.
’WEEKL’: Recording every week on the same day.
a Select the TV channel you want to record from.
DUnder ’VPS/PDC’ switch ’VPS/PDC’ on or off with
the B or A button.
b Press TELETEXT e to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you
have selected.
DUnder ’LP’ select the recording speed ’SP’ or ’LP’
with the B or A button.
h When all information is correct, press OK .
c With the number buttons 0-9 select the TELETEXT
programme guide page. This page can be stored as the
preferred page (see paragraph ’How to read TELETEXT’).
i Confirm the message on the screen with OK .
A Timer recording can only start, if the set is not being
used for other video recorder functions (e.g. playback).
d Press TIMER s . ’PLEASE WAIT...’ will briefly
appear at the bottom of the screen.
DThe programming information has been stored in a
TIMER block.
Next, a highlighted title line will appear.
DIf ’NO TIMER INFORMATION ON THIS
PAGE’ appears, TELETEXT programming cannot be
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph ’programming a
recording’.
j Exit the menu with the TIMER s button.
k Make sure that the cassette you have put in can be
recorded on.
e A cursor (h) will appear at the first programme line. Use
the B and A buttons to move the cursor (h) to the TV
programme you want to record.
DIf you want to cancel this function, press
TELETEXT e .
f Press OK . The timer menu will appear. The required
programming information has been stored in a TIMER
block. Please check the information.
TIMER PROGRAMMING
VPS
DATEPROG. START END
PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx
15:36 15:50
*
ONCE
ã
«
Exit:
press TIMER
Start:
press
è
22
Download from Www.Somanuals.com. All Manuals Search And Download.
E If you have not connected the satellite receiver yet, use a
scart cable to connect scart socket EXT. 1 on the
TV-VIDEO Combi to the corresponding scart socket on
the satellite receiver.
Automatic recording from a satellite
receiver (SAT RECORDING)
You can use this function if you own a satellite receiver that
can control other machines via a scart cable and a
programming function.
h Programme the satellite receiver with the required
information (programme number on the SAT receiver,
start time, end time).
a Press TIMER s on the remote control.
DThe information on how to programme your satellite
receiver can be found in the instruction manual for
your satellite receiver.
b Select the line ’TIMER PROGRAMMING’ with the
B or A button and confirm with C .
Activating a recording from the SAT
receiver with OTSR
(OTSR = One Touch Sat Recording)
TIMER PROGRAMMING
VPS
DATEPROG. START END
PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
--
--
--:-- --:--
-
-----
In the previous paragraph we described how to prepare the
TV-VIDEO Combi for recording from the SAT receiver by
means of the menu (step a through f ). OTSR will allow
you to record a SAT programme fast and easy with just one
button press.
ã
«
Exit:
press TIMER
Start:
press
è
a Press the Sr/q buttons at the same time until the
timer light on your TV-VIDEO Combi starts blinking. It will
blink three times and will then stay alight.
c Press C .
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
TIMER PROGRAMMING
VPS
PDC REP.
DATEPROG. START END
DEach time you programme a recording on the
satellite receiver, you must prepare your TV-VIDEO
Combi for recording. Each time you prepare your
TV-VIDEO Combi for a satellite recording a
TIMER-block will be reserved and the TIMER light at
the front will blink.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx
15:36 15:50
*
ONCE
ã
«
Exit:
press TIMER
Start:
press
è
DIf the TIMER light does not blink, you have not set
the clock or all TIMER-blocks have been used up.
Please read the paragraph ’Setting the time and
date’ or ’How to clear a programmed recording
(TIMER)’.
d Select the entry field ’PROG.’ with the D or
C
button. Select ’Record prepared’ with the B or
A button.
DIf you want to cancel the programmed SAT
recording, follow the procedure described in the
paragraph ’How to clear a TIMER’.
e Confirm with the OK button.
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
f To end, press the TIMER s button.
g Place a cassette in the machine.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
How to check or change a TIMER
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons B or A and confirm with the
C
button.
c Select the TIMER you want to check or change with the
B or A button and confirm with the OK button.
d Select the entry field with the D or C button.
e Change any information with the B or A button or
with the 0-9 buttons.
DUnder ’LP’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
f Confirm with the OK button.
g To end, press the TIMER s button.
h Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons B or A and confirm with the
C
button.
c Select the TIMER you want to clear with the menu
buttons B or A .
d Press the CLEAR button.
e Switch off with the TIMER s button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ADDITIONAL FUNCTIONS
c In the line ’Parental control’ select ’ON’ with
Changing the TV system
the D or C button.
If you play back recordings made on a different kind of tape
(for example, NTSC standard), the automatic TV system
switch-over may lead to colour interferences. You can switch
off the ’automatic TV system switch-over’ as follows.
d Confirm with the OK button.
e To end, press the MENU button.
Keep the remote control in a safe place.
a Press the MENU button. The main menu appears.
f Switch off the machine with the STANDBY m button.
b Select the line ’Tape’ with the B or A button and
DIf you want to switch off parental control, select
confirm with the C button.
’OFF’ in line ’Parental control’.
DIf a button is pressed with activated parental
control, ’Parental Control active’ will
appear.
TAPE
Tape speed
Tape counter
Repeat play
Video system
Jitter
SP
LEFT
DIf you have activated parental control, you can only
operate the TV-VIDEO Combi with the remote
control.
OFF
AUTO
(,,,,=,,,,$
(,,,,=,,,,$
Tracking
Cleaning
DIf you want to eject a cassette with activated
parental control, press the STOP h button several
seconds.
ã
«
Exit:
press MENU
c In the line ’Video system’ select the required TV
system with the menu buttons D or C .
Switching the On-screen display (OSD) on
or off
d Confirm with the OK button.
e To end, press the MENU button.
You can switch the On Screen Display of the current operating
information on or off.
Parental control
a Press the MENU button. The main menu appears.
This function will prevent unauthorised use of your TV-VIDEO
Combi. All button-functions will be locked.
b Select the line ’Setup’ with the menu buttons B or
A and confirm with the C button.
DYou can make programmed recordings while the parental
control is on.
a Press the MENU button. The main menu will appear.
b Select the line ’Setup’ with the B or A button and
SETUP
confirm with the C button.
Parental control
OFF
MAX
NORMAL
ON
Display
Format 16:9
Speakers
Sound only
VCR 1/2
ON
VCR
1
SETUP
ã
Exit:
«
press MENU
Parental control
OFF
MAX
NORMAL
ON
Display
Format 16:9
Speakers
Sound only
VCR 1/2
ON
c Select the line ’Display’ with the menu buttons
B
VCR
1
or A .
ã
«
Exit:
press MENU
25
Download from Www.Somanuals.com. All Manuals Search And Download.
d Select one of the options indicated with the menu buttons
C or D .
Switching the internal speakers on or off
’MAX’: The OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’MIN’: The OSD is reduced to a minimum.
’PROGR.’: The programme number is always shown.
’COUNTER’: The tape position is always shown.
If you want to connect a HiFi-stereo set or a ’Dolby Pro Logic’
decoder to the socket AUDIO OUT L/R (audio output left/right)
and switch off the internal speakers, proceed as follows:
a Press the MENU button. The main menu will appear.
e Confirm with the OK button.
b Select the line ’Setup’ with the B or A button and
confirm with the C button.
f To end, press the MENU button.
DWith the OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
SETUP
Parental control
OFF
MAX
NORMAL
ON
Switching to 16:9 wide screen picture
Display
Format 16:9
Speakers
Sound only
VCR 1/2
ON
VCR
1
If you are using a cassette with 16:9 wide screen recordings,
you can switch this function ’ON’. The TV-VIDEO Combi will
now automatically switch to wide screen.
ã
«
Exit:
press MENU
a Press the MENU button. The main menu appears.
c Select the line ’Speakers’ with the B or A .
b Select the line ’Setup’ with the B or A button and
d In the line ’Speakers’ select ’OFF’ with the D or
confirm with the C button.
C button.
e Confirm with the OK button.
f To end, press the MENU button.
SETUP
DIf you want to switch the speakers on again, select
’ON’ in line ’Speakers’.
Parental control
OFF
MAX
NORMAL
ON
Display
Format 16:9
Speakers
Sound only
VCR 1/2
ON
VCR
1
ã
«
Exit:
press MENU
c Select the line ’Format 16:9’ with the A or
B
button.
d Select one of the possibilities with the C or D button.
’NORMAL’ : Normal size picture.
’EXTEND.’ : Extended size picture.
’COMPR.’ : 16:9 format picture.
DWhen you watch TV you can select between
’EXTEND.’ and ’NORMAL’.
e Confirm with the OK button.
f To end, press the MENU button.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound playback without picture
Switching the remote control command
To play sound only when you watch TV or when you playback
If you have two machines with the same remote control
a cassette, you can switch off the picture. You will hear sound command, you can change the remote control command of the
only.
handset and the remote control command of your TV-VIDEO
Combi.
a Press the MENU button. The main menu appears.
a Press the MENU button. The main menu appears.
b Select the line ’Setup’ with the B or A button and
confirm with the C button.
b Select the line ’Setup’ with the menu buttons B or
A and confirm with the menu button C .
SETUP
SETUP
Parental control
OFF
MAX
NORMAL
ON
Display
Parental control
OFF
MAX
NORMAL
ON
Format 16:9
Speakers
Display
Format 16:9
Speakers
Sound only
VCR 1/2
ON
VCR
1
Sound only
VCR 1/2
ON
VCR
1
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
c Select the line ’Sound only’ with the B or
A
button.
c Select the line ’VCR 1/2’ with the menu buttons
B
or A .
d Switch the function on or off with the D or C button.
e Confirm with the OK button.
d Select ’VCR 1’ or ’VCR 2’ with the menu buttons
D or C .
f Press the MENU button.
e Confirm with the OK button.
f On the remote control, press the STOP h button and the
digit button 2 at the same time to switch the remote
control to ’VCR 2’.
DIf you want to switch back to ’VCR 1, press the
STOP h button and the digit button 1 at the same
time.
g Confirm with the STOP h button.
h To end, press the MENU button.
DAfter you changed the batteries in the remote
control, it will switch back to ’VCR 1’.
DIf e.g.: ’VCR 1’ appears on the TV screen after
pressing a button for a few seconds, you must
switch the remote control to ’VCR 2’.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Continuous playback
Switch off function (SLEEP TIMER)
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
You can programme your set to switch off after a
predetermined period.
a Press the TIMER s button on the remote control.
a Press the MENU button. The main menu appears.
b Select line ’Sleep timer’ with the B or
A
b Select the line ’Tape’ with the menu buttons B or
button and confirm with the C button.
A . Confirm with the menu buton C .
c Determine the time left until switch off in 15 minutes
intervals using the B or A button.
DYou can switch the function off with the CLEAR
button on the remote control.
TAPE
Tape speed
Tape counter
Repeat play
Video system
Jitter
SP
LEFT
d Confirm with the OK button.
OFF
AUTO
(,,,,=,,,,$
(,,,,=,,,,$
Tracking
Cleaning
e To end, press the TIMER s button.
ã
«
Exit:
press MENU
Switch on function (WAKE-UP TIMER)
c Select the line ’Repeat play’ with the menu buttons
You can programme your set to switch on at a predetermined
time.
B or A .
d Select ’ON’ with the menu buttons D or C . If you
a Press the TIMER s button on the remote control.
select ’OFF’, the function will be switched off.
b Select line ’Wake-up timer’ with the B or
A
e Confirm with the OK button.
button and confirm with the C button.
f Press the MENU button.
c Select the entry field with the D or C button.
d Enter the information with the B or A button or with
the number buttons 0-9 .
e In the line ’ON’, switch the function on or off.
f Press the OK button.
g To end, press the TIMER s button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Before you call an engineer
If, contrary to expectation, you have any problems using this
TV-VIDEO Combi, it may be caused by one of the reasons
mentioned below. You can also call the customer service
centrein your country.
No sound from speakers:
•
Speakers switched off: To switch on the speakers, turn to
chapter ’ADDITIONAL FUNCTIONS’, section ’Switching the
internal speakers on or off’.
You will find the phone number in the enclosed guarantee
leaflet. Have the model number (MODEL NO) and the
production number (PROD.NO) of your video recorder ready.
Recording starts as soon as the satellite receiver or second
video recorder is switched on:
•
Externally controlled recording switched on: Switch off the
externally controlled recording.
Technical problem:
•
You can reset the settings on your set (careful: all information will
be deleted): with the video recorder switched on, hold the
H and the I button until the screen switches off.
’Smart Clock’ setting does not work:
•
You have stored a TV channel on programme number ’P01’ that
does not transmit TELETEXT: On ’P01’ store a TV channel that
transmits TELETEXT.
Your TV-VIDEO Combi does not respond to any button being
pressed:
•
•
Poor TELETEXT reception: On ’P01’ store a TV channel with
good TELETEXT reception.
You have not activated the Smart Clock function: Switch the
function ’ON’.
•
•
There is no power supply: check the power supply
A programmed recording is currently being made: to cancel the
programmed recording, press STANDBY m for several seconds.
Parental control is on: switch the parental control off.
•
•
You hear a very short and soft noise coming from your
TV-VIDEO Combi at 3:00 at night:
Continuous playback is on: switch the continuous playback off.
•
’Smart Clock’ is checking the time: Switch off the Smart Clock
function.
Cassette is jammed in the TV-VIDEO Combi:
•
Don’t use force. Switch off with the 8 power switch for 30
seconds, then switch it on again.
TELETEXT does not start at page 100:
•
You have stored a different preferred page: Store page 100 as
preferred page.
Remote control does not work:
•
Remote control not pointed toward the TV-VIDEO Combi: point it
at the TV-VIDEO Combi.
•
•
Batteries have run out: change the batteries.
You have given the wrong remote control command: read
’Switching remote control command’ in chapter ’Additional
functions’.
Technical terms used
Current tape position : The part of the tape currently being
played.
External source : A device connected via a socket (for
example, scart socket) which is transmitting audio/video
signals to the TV-VIDEO Combi.
Index marking : A marking which is automatically made on the
tape at the beginning of every recording. This marking
(recording ID) can be searched for with the Index search
function.
Scart cable : Also known as a Euro-AV cable. This standard
cable is an easy method of connecting various TV, audio and
video devices, such as a HIFI and Dolby Surround set, video
recorder, DVD player, SAT receiver, decoder, computer and
similar devices. Other signals in addition to audio and video
signals can be transmitted on it.
TV system : There are various systems for transmitting
television signals, for example, PAL, SECAM, PAL BG, SECAM
DK, SECAM L/L, NTSC etc. The system used by your television
depends on which country you are in.
TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.
OTR : One touch recording. This function enables you to select
the switch-off time in intervals of 15 minutes.
No picture when you play a cassette:
•
There is no recording on the cassette: change the cassette.
Poor picture quality when you play a cassette:
•
•
The cassette badly worn or of poor quality: use new cassette.
Tracking is not properly adjusted or the video heads are dirty:
turn to chapter ’PLAYBACK FUNCTIONS’ and read the section
’Cleaning the video heads’.
•
•
Read the section ’Picture interference’.
You are playing a cassette with a LongPlay recording on it:
Excellent picture quality is only guarateed with recordings made
in StandardPlay recording speed.
The TV-VIDEO Combi will not record:
•
The TV channel you want to record is not stored or you selected
the wrong programme number: check TV channels stored.
You have loaded a cassette which cannot be recorded on: undo
the erase protection on the cassette.
•
Programmed recording does not work:
•
•
You have not set the TIMER properly: check the TIMER blocks.
You have programmed the wrong time or date: check time and
date.
•
You have put in a cassette that cannot be recorded on: undo the
erase protection on the cassette.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|