TVCR
MO DEL NO.:
14PV120/07,14PV125/07,14PV225/07
14PV422/07,14PV425/07
Thank you for buying a Philips TV-Video combi. This TV-Video combi is one of the most sophisticat-
ed and easy-to-use TV-Video combi on the market. Please take the time to read this operating manu-
al before using your TV-Video combi. It contains important information and notes regarding operation.
The TV-Video combi should not be turned on immediately after transportation from a cold to a
hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transport-
ing the device. The TV-Video combi needs this time in order to become acclimatised to its new envi-
ronment (temperature, air humidity, etc.).
This TV-Video combi is used for the recording and playback of VHS videocassettes.
Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used
with a suitable adapter.
PAL
We hope you enjoy your new TV-Video combi.
These operating instructions have been
Important notes regarding operation
printed on non-polluting paper.
Deposit old batteries at the appropriate col-
lection points.
Please make use of the facilities available in
your country for disposing of the packaging
of the TV-Video combi in a way that helps to
protect the environment.
This electronic device contains many materi-
als that can be recycled. Please enquire
about the possibilities for recycling your old
device.
Danger: High voltage!
There is a risk of an electrical shock!
"
"
The TV-Video combi does not contain any
components that can be repaired by the
customer. Please leave all maintenance
work for qualified personnel.
As soon as the TV-Video combi is connect-
ed to the power supply, some components
are in constant operation. To-switch off the
TV-Video combi completely you must dis-
connect it from the mains or switch it off with
the main switch.
"
So that you can identify your machine for service
questions or in the event of theft, enter the serial
number here. The serial number (PROD.NO.) is
printed on the type plate fixed at the back of the
device.
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
Make sure that air can circulate freely
through the ventilation slots on the TV-Video
combi. Do not place the device on an
unsteady base.
!
!
MODEL NO. : 14PV120/07, 14PV125/07
14PV225/07, 14PV422/07
14PV425/07
Make sure that no objects or liquids enter
the TV-Video combi. Do not place vases or
the like on the TV-Video combi. If liquid is
spilt into it, immediately disconnect the TV-
Video combi from the power supply and call
After-sales Service for advice.
PROD. NO.
...........................
Interference
Do not place any combustible objects on the
device (candles, etc.).
!
!
The Department of Trade and industry operates a
Radio lnvestigation Service to help TV licence hold-
ers improve reception of BBC and ITC programmes
where these are being spoilt by interference.
If your dealer cannot help, ask at a Main Post Office
for the booklet 'How to lmprove Television and Radio
Reception'.
Make sure that children do not place any
foreign objects within the openings or venti-
lation slots.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front of the device
VIDEO
AUDIO
P
STANDBY
y
5
P-
P+
I
Standby/on: To switch TVCR on or off, interrupt menu function.
+
–
Volume: In connection with the button
,
to adjust the volume.
Programme number minus: previous programme number
Programme number plus: next programme number
Record: To record the programme currently selected.
B
Playback: To play a recorded cassette.
C
/A
Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then
ejected from the machine.
When tape playback is stopped, press to fast forward the tape at hight speed.
1
0
When tape playback is stoped, press to rewind the tape at hight speed.
Sockets on the front:
White socket / AUDIO input socket: To connect a camcorder or video games (audio).
VIDEO
Yellow socket /
Small socket /
input socket: To connect a camcorder or video games (video).
socket for headphones: To connect headphones.
Back of the set
EXT/AV1
Aerial input socket: To connect the aerial cable
EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc
Power switch: To switch the TV-Video Combi off.
Caution: If you switch off using the power switch, TIMER-recordings are impossible!
The control lights at the front of machine
STANDBY
Standby light: lights up when the TV-Video Combi has been switched on by means of the main
switch.
RECORD
Recording light: lights up during recording.
Fast blink: recording pause, timer recording not stand-by.
Slow blink: timer recording is stored in a timer block.
EN
Download from Www.Somanuals.co3m. All Manuals Search And Download.
Specifications
Supplied accessories
• Operating instructions
Voltage: 220-240V/50Hz
• Remote control and batteries
Power consumption (Standby): less than 5W
Rewind time: less than 260 seconds (cassette E-180)
Number of video heads : 2
Recording/playback time: 3 hours (SP)
(cassette E-180), 6 hours (LP) (cassette E-180)
Weight without packing in kg: 11.5
Dimensions in cm (HxWxD):40.0x37.3x38.0
Power consumption : 52W
1. Connecting the TV-Video Combi
Important for the United Kingdom
Preparing the remote control for
operation
This apparatus is fitted with an approved 5 Amp
plug. To change a fuse in this type of plug pro-
ceed as follows:
1.Remove fuse cover and fuse.
2.Fix new fuse which should be a BS1362
5A,ASTA or BSI approved type.
The remote control and its batteries are packed
separately in the original TV-Video Combi pack-
aging. You must install the batteries in the
remote control before use.
3.Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should not
be greater than 5A.
1.Take the remote control and the enclosed bat-
teries (2 batteries).
2.Open the remote control's battery compart-
ment and place the batteries in it as shown in
the picture and close the battery compartment.
The remote control is now ready to use.
Its range is approximately 7 metres.
The severed plug must be destroyed to avoid a pos-
sible shock hazard should it be inserted into a 13A
socket elsewhere.
How to connect a plug:
The wires in the mains lead are coloured in accor-
dance with the following code:
Connecting the cable
BLUE- 'NEUTRAL' ('N')
BROWN- 'LIVE' ('L')
4.The BLUE wire must be connected to the termi-
nal which is marked with the letter 'N' or
coloured BLACK.
5.The BROWN wire must be connected to the
terminal which is marked with the letter 'L' or
coloured RED.
6.Do not connect either wires to the earth termi-
nai in the plug which is marked with the letter
'E' or by the safety earth symbol or coloured
green or green-and-yellow.
Before replacing the plug cover, make certain that
the cord grip is clamped over the sheath of the
lead-not imply over the two wires.
1.Insert the aerial cable plug into the AERIAL at
the back of the TV-Video Combi.
2.Connect the mains cable to the wall socket.
3.If the little red standby light (STANDBY ) at
the front panel of the set is not lit, please
switch on the set using the main power
switch. The power switch
left side panel of the set.
is located on the
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
4.The following screen will appear on the TV.
Connecting additional devices
PLEASE CONNECT AERIAL OR
CABLE TO THE TVCR
You can connect additional devices such as
decoders, satellite receivers, camcorders, etc. to
the EXT1 socket.
THEN...
KEY
PUSH P+
OR...
FOR PLAY ONLY PUSH PLAY
You can find more details in chapter
'Preparation for use'.
The respective scart socket is usually marked
'
AV
'
or 'TV' on the decoder or satellite receiver.
2. Important notes for operation
Switching on
You can switch on the TV-Video Combi with
Navigation in the screen menu
You can check/change many functions and set-
tings of your TV-Video Combi via on-screen
menu. The individual functions are selected, via
the remote control as follows:
STANDBY/ON y
.
PLAY B-K
STOP C-L
If you press
,
,
,
PROG P+
,
FWD 1- B
REW0- s
0..9
PROG P–
or
while
,
the set is in Stand-by, the power will be auto-
matically turned on.
MENU
Call up the menu: with
.
PLAY B-K STOP C-L
0..9
To select: with
.
Note that the keys
will be inactive for
about 5 seconds just after having switched the
TV-Video combi off.
To enter or change your selection: with the
0..9
PLAY B-K STOP C-L
number buttons
or with
.
Power outage/no power
FWD 1- B
To save or confirm: with
To cancel: with CLEAR .
STATUS/EXIT
.
Channel information remains saved for up to 10
year, the time and timer information is saved for
up to 1 minute.
To end: with
.
SELECT K L CHOOSE B
→TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
EN
Download from Www.Somanuals.co5m. All Manuals Search And Download.
3. Installing your TV-Video Combi
Preparation for use
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or hired decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
1.After you have connected the aerial or cable,
confirm the picture on the TV screen with
PROG P+ .
0..9
1.Use PROG P+
PROG P– or
to select the
,
TV channel which you would like to allocate
the decoder to.
2.The automatic TV channel search starts.
MENU
2.Press
. The main menu will appear.
PLAY B-K STOP C-L
3.Use
SET UP'. Then press
to select 'TUNER
FWD 1- B
.
PLEASE WAIT
PLAY B-K STOP C-L
4.Use
to select 'MANUAL
FWD 1- B
TUNING'. Then press
.
START
FINISH
PLAY B-K STOP C-L
5.Use
to select
→→→→→→→→→→→→→→→→→→→→→→→
'DECODER'.
MANUAL TUNING
When automatic TV channel search is com-
plete,'AUTO TUNING COMPLETE' will appear
on the TV screen.
PROG.
CHANNEL
→DECODER
SKIP
P55
055
[OFF]
[OFF]
<14PV 225>
3.'TIME' and 'DATE' will appear on the TV
SELECT K L CHOOSE B
END=EXIT
screen.
4.Check 'TIME'. If required, please change the
0..9
time with the number buttons
.
FWD 1- B
6.Use
to select 'ON'
(Decoder switched on).
TIME --:--
How can I switch off the decoder?
DATE --/--/--
FWD 1- B
Use
to select 'OFF' (Decoder
switched off).
SMART CLOCK [ON]
STATUS/EXIT
7.To end, press
.
END=EXIT
The decoder has now been allocated to this TV
channel.
5.Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6.When all information is correct, save by
STATUS/EXIT
pressing
.
The preparation for use is now complete.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual TV channel search
Using the satellite receiver
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing TV channels must
be searched for and stored manually.
You can receive channels from the satellite
AV1/EXT1
receiver via the scart socket
.
To do this, select the channel number 'AV1' by
0..9
pressing 0,0,1, with the keys
on the remote
MENU
1.Press
. The main menu will appear.
control.You will have to select the channel you
want to receive on the satellite receiver itself.
PLAY B-K
2.Select 'TUNER SET UP' with
STOP C-L
FWD 1- B
and confirm with
.
PLAY B-K
3.Select 'MANUAL TUNING' with
Automatic Tuning
STOP C-L
FWD 1- B
.
and confirm with
During installation, all available TV channels are
searched for and saved. If the channel assign-
ments of your cable or satellite TV provider
change or if you are reinstalling the TV-Video
Combi, e.g. after moving house, you can start
this procedure again. This will replace the TV
channels already saved with the new ones.
MENU
PLAY B-K STOP C-L
4.Select 'PROG.' with
. Then
FWD 1- B
.
press
MANUAL TUNING
→PROG.
CHANNEL
DECODER
SKIP
P55
055
[OFF]
[OFF]
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'TUNER SET UP' with
SELECT K L CHOOSE B
STOP C-L
FWD 1- B
and confirm with
.
END=EXIT
PLAY B-K
3.Select 'AUTO TUNING' with
STOP C-L
FWD 1- B
, and confirm with
.
PLAY B-K STOP C-L
0..9
5.With
, select the
or
desired programme number that you want to
use for the TV channel, e.g. 'P01'. Then press
PLEASE WAIT
START
FWD 1- B
.
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
FINISH
→→→→→→→→→→→→→→→→→→→→→→→
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
4.The automatic TV channel search starts. This
allows the TV-Video Combi to save all avail-
able TV channels. This procedure may take
several minutes.
5.When the TV channel search is complete,
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.
PLAY B-K STOP C-L
6.Select 'CHANNEL' with
,
FWD 1- B
and confirm with
. Then enter the
0..9
desired channel with
.
When a channel is found,it will stop searching. If
FWD 1- B
this is the channel you want, press
. If
'
'
you set SKIP on for a channel, this channel will
be ignored when going through the channels
[14PV225 model only]
Sorting of TV channels from P01 to P06 will
be performed automatically as follows.
PROG P+
PROG P–
with
or
.
P01: BBC1
P02: BBC2
P03: ITV
P04: CH4
P05: CH5
To search for other TV channels, begin again at
step 4.
I don't know the channels for my TV stations
PLAY B-K STOP C-L
In this case, press
in 'CHAN-
NEL' to start the automatic channel search. A
changing channel number will appear on the TV
screen. Continue the automatic search until you
have found the desired TV channel.
P06: SKY NEWS
STATUS/EXIT
7.To end, press
.
EN
Download from Www.Somanuals.co7m. All Manuals Search And Download.
Sorting and clearing TV channels
manually
Setting the clock
If the display shows an incorrect time or ' --:-- '
the time and date must be reset manually.
MENU
You can use this function to individually sort the
TV channels already saved or to delete unwant-
ed TV channels or those with poor reception.
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'GENERAL SET UP' with
STOP C-L
FWD 1- B
The clock resets automatically
and confirm with
.
If you save a TV channel that transmits TXT/PDC
on programme number ‘P01’, date and time will
and constantly be updated. As a result, time
changes, i.e. daylight savings time, will be set
automatically.
PLAY B-K STOP C-L
3.Select 'CLOCK' with
confirm with
and
FWD 1- B
.
4.Check the time in 'TIME'. If required, please
0..9
change the time with
.
5.Check 'DAY', 'MONTH' and 'YEAR' in the
same way.
(Choose 'SMART CLOCK' ON or OFF with
MENU
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'TUNER SET UP' with
STOP C-L
FWD 1- B
and confirm with
.
FWD 1- B
. [14PV225])
PLAY B-K STOP C-L
3.Select 'MOVE' with
confirm with
, and
STATUS/EXIT
6.To end, press
.
FWD 1- B
.
MOVE
TIME --:--
→P01: 02
P02: 03
P03: 05
P04: 10
P05: 74
P06: 90
P07: 99
P08: 121
P09: 124
P10: 130
DATE --/--/--
SMART CLOCK [ON]
SELECT K L CHOOSE B
END=EXIT
END=EXIT
PLAY B-K STOP C-L
4.With
, select the saved TV
Time/date is displayed incorrectly despite
manual setting
channel that you want to move.
* With Smart Clock, if you save a TV channel
that transmits TXT/PDC on programme num-
ber 'P01', date and time will automatically be
FWD 1- B
5.Confirm with
.
PLAY B-K
6.Move the selected channel with
STOP C-L
to the programme number you want
updated when the TV-Video Combi is in
by
Stand-
to assign.
Then pless
.
If you wish to switch this automatic time cor-
rection off, select 'OFF' for Smart Clock. You
can reactivate this function at any time by
selecting Smart Clock 'ON'.
FWD 1- B
. The programme num-
.
ber will change to '_ _'
FWD 1- B
7.Confirm with
8.To assign other TV channels to a programme
number, repeat steps 4 to 7.
9.Confirm the assignment of the TV channel
with
.
MOVE menu
STATUS/EXIT
10.To exit the
, press
MOVE menu
.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4. TV SET FUNCTIONS
PLAY B-K STOP C-L
3.Select an item using
, and
Selecting a TV channel
REW0- s
FWD 1- B
then modify with
.
Select the desired TV channel (= the programme
SELECT K L ADJUSTE s
B
/
0..9
number) with PROG P+ , PROG P– or with
on the remote control.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
TINT
<
<
<
<
<
>
>
>
>
>
Selection of the scart socket
To select the Scart socket, please enter 0,0,1,
END=EXIT
0..9
with the keys
on the remote control. AV1
appears on the screen.
STATUS/EXIT
4.To end, press
.
'TINT' appears only when receiving NTSC sig-
nals from another source.
Selection of the front A/V sockets
To select the front A/V sockets, please enter
How do I read TELETEXT? [14PV225]
0..9
0,0,2, with the keys
on the remote control.
'AV2' appears on the screen.
Many TV channels transmit TELETEXT informa-
tion along with their TV channels. With this TV-
Video Combi you can retrieve this information
and display it on the screen using the built-in
TELETEXT decoder.
Volume control
You can adjust the volume using VOL5+ ,
VOL5– on the remote control.
1.Press
to switch the TELETEXT decoder
on. Your TV-Video Combi will now show
TELETEXT for the TV channel you have
If you would like to change the volume on the
machine, press 5– or 5+ on the TV-Video
Combi.
selected. Press
again to show TELE-
TEXT in transparent mode.
2.If you want to select another page, type in the
number of the page with the number buttons
If you want to mute the sound temporarily
MUTE
(e.g.:during a telephone call), press
the remote control. When you press
on
0..9
on the remote control.
MUTE
With the colour buttons on your remote control
you can directly select the page numbers
shown at the bottom of the TV screen.
again, the sound will return at its original vol-
ume level.
The button
page.
takes you back to the start
Picture settings
3.Press
off.
to switch the TELETEXT decoder
The picture can be adjusted according to your
personal preferences.
These settings are automatically stored after
exiting the main menu.
S
pecial TELETEXT functions
[14PV225]
MENU
1.Press the
. The main menu will appear.
In TELETEXT mode you can use the special
TELETEXT functions.
o
PLAY B-K
2.Select 'PICTURE CONTROL' with
STOP C-L
FWD 1- B
and confirm with
..
l
p
: enlarge font
: select TELETEXT sub-page
: recall hidden information
p
l
o
: stop page changes
: go back to start page
EN
Download from Www.Somanuals.co9m. All Manuals Search And Download.
The maximum time period to be set until switch-
off is 2 hours.
Switch-off function (SLEEP TIMER)
You can programme your set to switch-off auto-
matically after a predetermined period.
1.Press SLEEP .
2.Press SLEEP repeatedly to extend the time
until switch-off in 30 minute increments.
The screen will show the time remaining until
switch-off, e.g.: '+0:30'.
If you would like to turn this function off, press
SLEEP
on the remote control several times until
switch-off appears. '--:--' will appear on the
screen.
SLEEP
To check the time until switch-off, press
on the remote control.
If a recording is in process, switch-off function
will be cancelled.
The machine now counts backwards to the
switch-off time.
5. Playback
Playing cassettes
Playing back NTSC cassettes
Cassettes that have been recorded in the NTSC
standard (for example, American cassettes) can
be played back using this TV-Video Combi.
You can use this TV-Video Combi to playback
recorded VHS video cassettes. You can operate
the TV-Video Combi using the remote control or
the buttons on the set.
Your TV-Video Combi can only record and play
standard VHS cassettes.
Searching for a tape position with
picture (scanning)
1.Put a cassette into the cassette slot. The cas-
sette is inserted automatically.
REW0- s
1.While a cassette is playing, press
(reverse) or
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces
the best possible playback quality. For old and
often-used video cassettes, this system reduces
interference. For new or high quality cassettes,
it emphasises the details.
FWD 1- B
(forward) one or more
times.
PLAY B-K
2.Press
to resume playback.
Still picture
Picture/ sound quality is poor
When playing rental videos or older, poorer
quality cassettes, it may not be possible to com-
pletely filter out picture and sound interference.
This is not a fault in your machine. Read the
section 'Manual tracking'.
STILL 2
1.During playback, press
to stop the
tape and display a still picture.
PLAY B-K
2.To continue playback, press
.
Scanning and still motion interferes with the pic-
ture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.
PLAY B-K
2.Press
to view the tape.
STOP C-L
3.To stop the playback, press
or
Searching for tape position without
picture (forward wind and rewind)
STOP/EJECT on the TV-Video Combi.
EJECT A
4.To eject the cassette, press
or
STOP C-L
1.Stop the tape with
.
STOP/EJECT when the TV-Video Combi stops
the playback.
REW0- s
FWD 1- B
2.Press
(reverse) or
(forward).
3.To stop the tape, press
Do I need to change the playback speed
when playing back LP recordings?
STOP C-L
.
During playback, the correct speed will automati-
cally be selected. For more information, please
read the section 'Selecting the recording speed
(SP or LP)' in the chapter 'Manual recording'.
Manual Tracking
To adjust the tracking manually, press P+ or
P-
.
on the TV-Video Combi during playback
Tracking returns to Automatic Tracking
STOP C-L
Adjustment when you press
or insert a
tape.
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Manual recording
General information
Lining up recordings (assemble cut)
When you add a further recording to a cassette,
which already has a recording on it, a short
blank (flicker) can appear between the old and
the new recording or the picture itself can flicker.
To help reduce these from occurring, proceed as
follows:
Use 'Manual Recording' to make a sponta-
neous recording (for example, a programme cur-
rently being shown).
If you want to start and stop a recording manual-
ly, read the section 'Recording without auto-
matic switch-off'.
1.Find the tape position of the old recording
where you want to insert the new recording.
2.Look at the last minute of the old recording
(playback).
If you want to start a recording manually but
have it stopped automatically, read the section
'Recording with automatic switch-off'. (e.g.
not to record to the end of the tape)
STILL 2
3.Press
at the tape position where
Read the section 'Automatic recording from a
satellite receiver', if you want a recording to be
controlled automatically by a satellite receiver.
the new recording is to go and press REC I .
4.Now start recording as usual by pressing
REC I on the remote control.
Recording without automatic
switch-off
STOP C-L
5.Stop recording with
.
Selecting the recording speed (SP
or LP)
1.Insert a cassette.
2.Use PROG P+ PROG P– or
programme number you want to record, for
example, 'P01'.
0..9
to select the
LP allows to double the recording duration on tape
(for example six hours instead of three hours on a
E180 cassette).
3.To start recording, press REC I .
STOP C-L
4.To stop recording, press
.
MENU
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'RECORD SETUP' with
Recording with automatic switch-off
(OTR One-Touch-Recording)
STOP C-L
FWD 1- B
and confirm with
.
3.Select the required recording speed with
FWD 1- B
.
1.Insert a cassette.
0..9
2.Use PROG P+
PROG P– or
to select the
SELECT K L CHOOSE B
programme number you want to record.
→RECORD SPEED
[SP]
3.Press REC I .
4.Each time you press REC I you will add 30
minutes to the recording time.
STOP C-L
5.To stop recording, press
.
END=EXIT
Preventing accidental erasing
STATUS/EXIT
4.To end, press
'SP'/'LP'
.
All cassettes (except
rental and pre-recorded
cassettes) have a secu-
rity tab on the back of
the cassette.
To prevent recording
over important recordings (erasing), you can
remove this security tab.
If you later decide to record on a protected cas-
sette, simply cover the hole with adhesive tape
or slide the tab to the right.
'SP': StandardPlay (normal recording speed) offers
the usual first-class picture quality.
'LP': LongPlay (half recording speed, double
recording time). 6 hours can be recorded on a 3-
hour cassette (E180) with a somewhat reduced
picture quality.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Programming a recording (TIMER)
General information
Programming a recording
Use a TIMER programming to automatically start
and stop a recording at a later time or date. The
TV-Video Combi will switch to the right pro-
gramme number and begin recording at the cor-
rect time. With this TV-Video Combi, you can
pre-programme up to eight recordings within a
period of one year. To make a programmed
recording, your TV-Video Combi needs to know:
*the date you want to make the recording
*the programme number of the TV channel
*the start and stop time of the recording
*PDC on or off [14PV225]
MENU
1.Press
. The main menu will appear.
PLAY B-K STOP C-L
2.Select 'TIMER' with
. Then
FWD 1- B
press
.
3.Select ONCE, DAILY, or WEEKLY recording
PLAY B-K STOP C-L
with
. Then press
FWD 1- B
.
SELECT K L CHOOSE B
→ONCE
DAILY
WEEKLY
TIMER LIST
This information is saved in a TIMER block.
END=EXIT
[14PV225]
What is 'PDC'?
If all TIMER blocks are in use, 'FULL' will appear
'PDC' (Programme Delivery Control) is used to
control the start and duration of TV channel
recordings. If a TV programme starts earlier or
ends later than scheduled, the TV-Video Combi
will turn on and off at the correct time.
What do I need to know about 'PDC'?
Usually the PDC time is the same as the start
time. But if your TV guide shows a PDC time
which is different from the programme’s sched-
uled start time, e.g. 20.10 (PDC 20.14), you
must enter the PDC time exact to the minute. If
you want a start time different from the PDC
time, you must switch PDC off.
on the TV screen.
4.Select the desired TIMER block with
0..9
.
Selecting once/daily/weekly recordings
PLAY B-K STOP C-L
Use
to select from the fol-
lowing options:
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY': Repeated weekly recordings (every
week on the same day)
5.Enter the Start time (START) End time
(STOP), Programme number (PROG.), PDC
0..9
information and the Date with
.
Programming a recording from the external
sources
You can also programme recording from an
external source via the Scart socket AV1 or the
front A/V connectors AV2.
6.When all inputs are correct, press
STATUS/EXIT
. The programming information
is stored in a TIMER block.
7.Insert a cassette with an intact security tab
(unprotected).
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to check, change or delete a
programmed recording (TIMER)
How to change a programmed
recording (TIMER)
MENU
MENU
1.Press
. The main menu will appear.
1.Press
. The main menu will appear.
PLAY B-K STOP C-L
PLAY B-K STOP C-L
2.Select 'TIMER' with
. Then
2.Select 'TIMER' with
. Then
FWD 1- B
FWD 1- B
press
.
press
.
PLAY B-K STOP C-L
3.Select ONCE, DAILY, or WEEKLY recording
3.Select 'TIMER LIST' with
,
PLAY B-K STOP C-L
FWD 1- B
with
. Then press
and confirm with
.
FWD 1- B
.
SELECT K L CHOOSE B
0..9
4.Select a TIMER block with
. (The flashing
ONCE
DAILY
number indicates an empty TIMER block.)
WEEKLY
→TIMER LIST
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
END=EXIT
SELECT TIMER NUMBER
END=EXIT
FWD 1- B
4.Select timer block with
5.To cancel the recording, press
STATUS/EXIT
.
CLEAR
.
6.To end, press
.
CLEAR
5.Press
to delete information, and
0..9
input correct information with
.
STATUS/EXIT
6.To end, press
.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Other functions
6.Insert a cassette.
Switching the status display off or
on
PLAY B-K
7.Start the continuous playback with
.
Your TV-Video Combi will automatically rewind and
start playing the tape from the begining when it rec-
ognizes a non-recorded part longer 10 seconds.
Along with the on screen menu, the status dis-
play also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen.
Blue Background on or off
MENU
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'VCR SET UP' using
If you want the TV screen to be solid blue when
a weak signal is received, set BLUE BACK-
GROUND to ‘ON’. The screen will be blue and
the sound will be muted. Or, if you want to
receive the weak signal, set BLUE BACK-
GROUND to ‘OFF’.
STOP C-L
FWD 1- B
and confrim with
.
PLAY B-K
3.Select 'STATUS DISPLAY' with
STOP C-L
.
SELECT K L CHOOSE B
REPEAT PLAY
→STATUS DISPLAY
BLUE BACKGROUND[ON]
[ON]
[ON]
MENU
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'VCR SET UP' using
STOP C-L
FWD 1- B
and confrim with
.
PLAY B-K
3.Select 'BLUE BACKGROUND' with
END=EXIT
STOP C-L
.
4.Select 'OFF' (no blue background) or 'ON'
FWD 1- B
4.Select 'ON' or 'OFF' with
.
FWD 1- B
(blue background on) with
.
STATUS/EXIT
5.To end, press
.
Which settings can I choose?
SELECT K L CHOOSE B
'ON': Shows the status display for a few sec-
onds only.
REPEAT PLAY
STATUS DISPLAY
[ON]
[ON]
→BLUE BACKGROUND [ON]
'OFF': Switches off the status display.
END=EXIT
Continuous playback
This function can be used to play a cassette
over and over again. When the end of the cas-
sette is reached, it will rewind and start from the
beginning again. This function is activated or
deactivated as follows.
STATUS/EXIT
5.To end, press
.
Parental control (Child lock)
MENU
1.Press
. The main menu will appear.
This function protects your TV-Video Combi from
unwanted use. All button functions on the front of
the machine are blocked.
PLAY B-K
2.Select 'VCR SET UP' using
STOP C-L
FWD 1- B
and confirm with
.
PLAY B-K
3.Select 'REPEAT PLAY' with
STOP C-L
.
Programmed recordings will still be recorded (in
spite of the parental control) and cannot be
interrupted.
SELECT K L CHOOSE B
→REPEAT PLAY
STATUS DISPLAY
[ON]
[ON]
MENU
1.Press
. The main menu will appear.
BLUE BACKGROUND[ON]
PLAY B-K STOP C-L
2.Use
to select 'GENERAL
FWD 1- B
SET UP'. Then press
.
PLAY B-K STOP C-L
3. Use
to select 'CHILD
END=EXIT
LOCK'.
FWD 1- B
4. Use
to select 'ON'.
FWD 1- B
4.Select 'ON' with
.
If you select 'OFF', continuous playback will be
'If a button at the front of the machine is pressed
while parental control is active, ’CHILD LOCK
ACTIVE’ will appear on the screen for a few seconds.
switched off.
5.To end, press
STATUS/EXIT
.
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Before you call an engineer
If, contrary to expectation, you have any prob-
lems using this TV-Video Combi, it may be
caused one of the following reasons.
No recording possible
*The TV channel you want to record is not
stored or you have selected the wrong pro-
gramme number: check TV channels stored.
*A cassette was inserted that does not have the
security tab (cannot be used to record): Insert
a cassette with an intact security tab or
change cassette. For more information, please
see the section ‘Preventing accidental erasing’
in chapter ‘Manual Recording’.
Your TV-Video Combi does not respond to
any button being pressed:
*There is no power supply: check the power
supply.
*Parental control is on:switch the parental con-
trol off.
*There is a technical problem: disconnect from
the mains power supply for 5 minutes, then
power-up again.
[14PV225]
*’PDC’ switched on but ‘PDC time’ wrong: enter
‘PDC time’ exactly to the minute. Check your
If this doesn't help, you can reset your TV-Video
Combi to the default factory settings.
aerial connection.
Resetting devices to default factory settings
*Warning: All the information stored (TV chan-
nels, time and date, TIMER) will be cleared.
1.Switch the TV-Video Combi to stand-by.
2.Press and hold REC I and PROG P+ at the
same time for 2 seconds or more.
Smart Clock does not work
*You have stored on programme number ‘P01’ a
TV channel that does not transmit TELETEXT.
Store on ‘P01’ a TV channel that transmits
TELETEXT.
*Poor TELETEXT reception. Store a TV channel
on ‘P01’ with good TELETEXT reception.
*You have not activated the Smart Clock func-
tion. Switch the function ‘ON’.
A cassette is jammed in the TV-Video Combi
*Don’t use force. Disconnect the set from the
mains and reconnect it again after a few sec-
onds.
You can also call the customer service centre
in your country.The telephone numbers can be
found on the back of this instruction manual.
Have the model number (MODEL NO) and the
production number (PROD.NO.) of your TV-
Video Combi ready.
Remote control does not work
*Remote control is not pointed at the TV-Video
Combi.
*Take out the batteries, wait for 10 seconds and
place them back in the remote control.
*Batteries have run out. Change the batteries.
No picture when you play a cassette
*There is no recording on the cassette.
Poor picture quality when you play a cas-
sette
*The cassette is badly worn-out or of poor qual-
ity. Use a new cassette.
*Tracking is not properly adjusted. Turn to sec-
tion ‘Manual Tracking’.
*Magnetism from nearby appliances and geo-
magnetism might affect the colour of the TV
picture. Move the TV-Video combi away from
such sources. The TV-Video combi will readjust
itself automatically. If you want to initiate an
immediate readjustment, unplug the TV-Video
combi from the mains and plug it in again
approximately 30 minutes later.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS NORGE AS
Sandstuveien 70,
PO Box 1, Manglerud
N-0612 Oslo
PHILIPS AUSTRIA GMBH
Triesterstrasse 64
1101 Wien
AUSTRIA
Tel: 0810 001 203
PHILIPS PORTUGUESA, S.A.
Consumer Information Centre
Rua Dr. António Loureiro Borge, nr. 5
Arquiparque, Miraflores
P-2795 L-A-VEHLA
NORWAY
Phone: 2274 8250
PORTUGAL
Phone: 021-4163063
OY PHILIPS AB
Sinikalliontie 3,
02630 Espoo
PHILIPS INFO CENTER
Alexanderstrasse 1
20099 Hamburg
PHILIPS CE, The Philips Centre,
420 - 430 London Road,
Croydon, Surrey
FINLAND
GERMANY
CR9 3 QR
puh. 09 615 80 250
Tel: 0180-53 56 767
UNITED KINGDOM
Phone: 0208-665-6350
PHILIPS KUNDTJÄNST SERVICE CONSOMMATEURS PHILIPS
PHILIPS KUNDECENTER
Frederikskaj 6,
1780 København V
DANMARK
Knarrarnäsgatan 7
Kista
164 85 Stockholm
SWEDEN
BP 0101
75622 Paris Cédex 13
FRANCE
Phone: 0825-889 789
Tlf.: 80 88 28 14
Tel: (0)8 598 52 250
PHILIPS POLSKA
Al. Jerozolimskie 195B
02-222 Warszawa
POLSKA
PHILIPS ELECTRONICS IRELAND LIMITED
Consumer Information Centre
Newstead, Clonskeagh
PHILIPS REPRESENTATION OFFICE
Ul. Usacheva 35a
119048 MOSCOW
DUBLIN 14
RUSSIA
TEL.: (022)-571-0-571
Phone: 01-7640292
Phone: 095-937 9300
PHILIPS CONSUMER ELECTRONICS
Servizio Consumatori
Via Casati 23
20052 Monza - Milano
ITALY
PHILIPS INFO CENTER
Fegistrasse 5
8957 Spreitenbach
SUISSE
Tel.: 0844-800 544
Phone: 800 820026
PHILIPS Iberia, S.A.
C/Martinez Villergas, 49
28027 MADRID
PHILIPS MAGYARORSZÁG KFT.
Fehérvári út 84/a.
Budapest 1119
PHILIPS CUSTOMER CARE CENTER
Twee Stationsstraat 80/
80 Rue des Deux Gares
SPAIN
Phone: 902-11 33 84
HUNGARY
Phone: (01)-382-1700
1070 BRUSSEL/BRUXELLES
BELGIUM (for BENELUX)
Tel: 070-222303
PHILIPS CONSUMENTENLIJN
Postbus 102 5600 AC Eindhoven
NEDERLAND
Tel.: 0900-8406
3143 025 20991
0EMN02128 / T6410/T6510EZ-PALI*****
Download from Www.Somanuals.com. All Manuals Search And Download.
|