Philips TV Receiver 502 1040510 User Manual

DTR 5520  
For support call 0800 331 60 15  
EN  
High-Definition Digital Terrestrial Receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
1
Important  
4
5
6
7
Accessories and connections  
28  
28  
1.1 Safety information  
1.2 Reducing power consumption  
7.1 Connecting your audio equipment  
7.2 Connecting your recording equipment 28  
7.3 Connecting your  
2
Your HD receiver  
7
7
8
8
9
9
standard-definition TV  
Guarantee and service  
Technical data  
29  
30  
30  
32  
35  
36  
37  
38  
2.1 What’s in the box?  
2.2 What you also need (not supplied)?  
2.3 Overview  
2.4 How to read this manual?  
2.5 How to use the menus?  
8
9
10 Frequently asked questions  
11 Glossary  
3
Getting started  
9
9
10  
3.1 Preparing your remote control  
3.2 Connecting your HDTV  
3.3 Installing your HD receiver  
3.4 What if no channels are found?  
10 12 Index  
12  
Contact information  
4
Using your HD receiver  
13  
4.1 Standby/wake up  
13 Trademarks and partner logos  
4.2 Switching on and off  
4.3 Changing channels  
4.4 Adjusting volume  
4.5 Using the channel banner  
4.6 Using channel lists  
4.7 Using the TV guide  
4.8 Scheduling/stopping recordings  
4.9 Using the Tools menu  
13  
13  
13  
13  
15  
15  
16  
17  
5
Using more of your  
HD receiver  
18  
18  
19  
20  
21  
5.1 HD receiver  
5.2 Remote control  
5.3 Front-panel display messages  
5.4 Using the Main menu  
6
Maintenance  
27  
27  
27  
27  
6.1 Cleaning  
6.2 Replacing  
6.3 Disposing  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Important  
Thank you for purchasing a Philips product.Take time to read this user manual before using your  
HD receiver. It provides important information on the installation, operation and safety of your HD  
receiver. Keep this manual next to your HD receiver for future reference.  
Disposal of your old product  
Your product is designed and manufactured with high quality materials  
and components, which can be recycled and reused.  
When this “crossed-out wheeled bin” symbol is attached to a product  
or its packaging, it means that the product is covered by the European  
Directive 2002/96/EC.  
Please inform yourself about the local separate collection process for  
electrical and electronic products.  
Please act according to your local rules and do not dispose of your old  
products with your normal household waste.The correct disposal of  
your old product will help prevent potential negative consequences for  
the environment and human health.  
The “Material recyclability” symbol affixed on the package cardboard and  
user manual means that these parts are recyclable.  
So do not dispose of them with your normal household waste.  
The “Material recyclability” symbol affixed on plastic packaging parts  
means that these parts are recyclable.  
So do not dispose of them with your normal household waste.  
The “Green Dot” symbol affixed on the cardboard means that  
the manufacturer of the product has financially contributed to the  
“Avoidance and Recovery of Packaging Waste” organization.  
4
Important  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.1  
Safety information  
Your HD receiver is powered using a 12V power supply unit.Your HD receiver has been  
manufactured to meet the appropriate safety standards, but you must follow the below instructions  
to operate it safely. Keep these instructions for future reference.  
Warnings  
Your HD receiver does not contain any user-serviceable parts. Do not attempt to open it.All  
maintenance work must be carried out by qualified services centres.  
• Before connecting the 12V power supply unit to the mains, check that the mains supply voltage  
corresponds to the voltage printed on it. If the mains voltage is different, consult your local dealer.  
• The 12V power supply unit has been designed for indoor use only.  
• Use only the original 12V power supply unit.  
To prevent fire or shock hazard, do not expose your HD receiver to rain or moisture.  
• Place your HD receiver on a firm surface, and do not cover the ventilation openings with items  
such as newspapers, table clothes, curtains, etc.  
• Do not install your HD receiver near heat sources such as radiators, stoves or other equipment  
that produce heat. Protect it from direct sunlight.  
• In order to ensure a free flow of air around your HD receiver, allow at least 5 cm of space above  
and around it.This prevents overheating of your HD receiver.  
• Do not place any combustible objects such as candles, etc., on your HD receiver.  
• Never stand objects filled with liquids, such as vases, on top of your HD receiver. Do not place  
anything on your HD receiver that might drip or spill into it. If this happens, disconnect the  
12V power supply unit from the wall socket and have your HD receiver checked at any  
authorized service centre.  
• The batteries installed in the remote control should not be exposed to excessive heat such as  
sunshine, fire or the like.  
Please also pay attention to all the warnings and cautions listed throughout this manual.  
Important  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2  
Reducing power consumption  
Your HD receiver is designed to reduce its impact on the environment and complies with the  
European Directive 2009/125/EC.This is part of Philips’ ongoing commitment to lead the way in  
environmental responsibility.  
It has a standby mode of operation that needs very little power. See the table below and please note  
that:  
• When your HD receiver is in the standby mode, you save energy (and therefore money) and  
reduce carbon dioxide emissions that damage the environment.  
You use the standby button on your HD receiver or remote control to switch between on and  
standby modes. In addition, if your HD receiver is on, but you do not press any button on it or  
your remote control for 3 hours (configurable - see ‘Automatic eco mode’ on page 24), your HD  
receiver will automatically get into the standby mode.  
You use the ON/OFF switch on the rear panel of your HD receiver to turn off your HD receiver.  
• If you are not going to use your HD receiver for several days, you can cut its energy consumption  
to zero by unplugging it from the mains wall socket.  
• In the off and standby modes, your HD receiver cannot receive updates from the network.  
However, at receiver wake-up, you will be prompted by a message if an update notification has  
been received.  
Mode  
Front-panel standby  
Typical power  
Typical annual  
indicator and display consumption (W)  
energy use (kWh)  
Power  
Not lit up  
0
0
adaptor  
unplugged  
Standby  
Standby indicator is  
red  
0.86  
5.00  
5.80  
*
15  
Active  
Standby  
Standby indicator is  
orange  
On  
A channel number is  
shown on the display  
* Based on your HD receiver being On for 4 hours daily and being in standby for 20 hours.  
6
Important  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Your HD receiver  
Congratulations on your purchase and welcome to Philips!  
To fully benefit from the support that Philips offers, register your product at  
2.1  
What’s in the box?  
12V power  
supply unit  
HD receiver  
HDMI cable  
RF cable  
Quick start  
guide  
Freeview flyer  
User manual  
Retune flyer  
TEXT  
RADIO  
EXIT  
GUIDE  
OPTIONS  
INFO  
AD  
DIGITAL RECEIVER  
Remote control and  
2 x AAA batteries  
Caution  
Plastic bags can be dangerous.  
To avoid suffocation, keep the bag away from babies and children.  
Your HD receiver  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.2  
What you also need (not supplied)?  
SCART cable (required only if you have a  
standard-definition TV or if you want to record  
a programme to an external recording device  
such as aVideo or DVD-R recorder)  
TV  
2.3  
Overview  
Front panel  
Front Panel  
1
2
3
4
5
6
7
Standby indicator  
Standby button  
Programme +/- buttons  
Resolution button  
V-Out button  
1
5
6
Display  
HD indicator  
2
3
4
7
Rear panel  
Rear Panel  
1
3
5
6
8
10  
1
2
3
4
5
6
7
8
9
Antenna IN*  
Antenna output to TV/VCR (antenna signal)*  
RJ45 Ethernet connector*  
USB 2.0 connector*  
HDMI™ connector*  
2
4
7
9
AUX SCART connector*  
DIGITAL audio out (digital)*  
L/R audio out (analogue)*  
ON/OFF switch  
Remote control  
1
2
10 12V power connector*  
TEXT  
RADIO  
EXIT  
GUIDE  
OPTIONS  
*
Safe extra low voltage  
3
INFO  
Remote control  
1
2
3
Standby  
4
5
Menu,Text, Picture format, Radio, Exit  
Guide, Options, Up/Down, Left/Right, OK,  
Info, Back  
Volume control, Programme +/-, Mute  
Alphanumeric keypad,Audio description,  
Subtitles  
4
5
AD  
DIGITAL RECEIVER  
8
Your HD receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.4  
How to read this manual?  
Danger  
3
Getting started  
Describes situations of injury or loss of life.  
3.1  
Preparing your remote control  
Warning  
Describes actions that may cause damage to  
the product.  
Caution  
+
Describes actions that are required to avoid  
dangerous or illegal situations.  
+
Note  
Additional information.  
Tip  
Remove the battery cover by gently pressing  
down in the small circle on the cover and  
sliding it downwards.  
Insert the two AAA batteries as shown. Be  
sure to match the + and - marks on the  
batteries to their respective marks inside the  
battery compartment.  
Information that is useful to know but  
not essential to the task. For example,  
information about alternative use.  
2.5  
How to use the menus?  
Press MENU, GUIDE, OPTIONS or  
INFO on your remote control to display  
the Main menu, TV guide,Tools menu or  
channel banner respectively.  
Replace the battery cover.  
Note  
For better reception, point your remote control  
directly at the front panel of your HD receiver  
while pressing any button.  
Use  
/
/
/
to navigate through the  
menus and change any setting.  
Press or OK to confirm your choice.  
Press EXIT to remove the menu.  
Caution  
For more information, see pages 13 to 27.  
Do not leave batteries in your remote control for  
long periods of time without use. Replace both  
batteries at the same time. Do not dispose of  
used batteries with your domestic waste. Used  
batteries should be recycled at the end of their  
useful life. Do not dispose of batteries in a fire.  
Getting started  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2  
Connecting your HDTV  
Danger  
3.3  
Installing your HD receiver  
Before you start the installation, make sure you  
have made all the required connections.  
Connect the 12V power supply unit to the  
12V input connector on the rear panel of  
your HD receiver.  
Risk of electric shock!  
Before making any connections, ensure that your  
equipment is disconnected from the mains.  
Connect the mains plug to the mains wall socket.  
Ensure that the ON/OFF switch on the  
rear panel of your HD receiver is switched  
on (is in the ‘1’ position).  
Your HD receiver displays a welcome  
message after a few seconds.  
1
Aerial wall  
HD receiver  
socket  
Mains wall  
socket  
TV  
2
HDMI  
Connect the aerial cable (not supplied) from  
the aerial wall socket to the Antenna IN  
connector on the rear panel of your HD  
receiver.  
Press the green button to start the  
installation.  
Use the supplied HDMI cable to connect the  
HDMI connector on the rear panel of your  
HD receiver to the HDMI input connector of  
yourTV. For the next step, note the chosen  
HDMI input of yourTV (e.g.‘HDMI 1’).  
Connect your TV to the mains and select the  
correct A/V source on your TV.This should  
correspond to the HDMI input connector  
to which your HD receiver is connected. If  
necessary, refer to your TV’s user manual for  
instructions.  
The Antenna powering menu appears.  
Let the Antenna powering setting be Off  
unless you use an indoor antenna that can  
be powered by the coaxial cable connected  
to the Antenna IN socket of your HD  
receiver (see note).  
Notes  
• Optionally, you can also use the supplied  
RF cable to connect the RF output  
connector (labelled ToTV/VCR) of your  
HD receiver to the RF input connector of  
your TV.  
Note  
To connect your HD receiver to your  
standard-definition TV, see page 29.  
Your HD receiver can only deliver 50 mA  
current under 5V, so refer to your indoor  
antenna’s user manual to check if its power  
requirement fits the capability of your HD  
receiver.  
10  
Getting started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the green button to confirm.  
Use  
/
to highlight the network that you  
The TV shape menu appears.  
want to install and press the green button.  
A progress screen displays to confirm that  
the search is taking place.  
When the search is complete, a screen  
displays the number of TV and radio  
channels that your HD receiver has found.  
Your HD receiver automatically saves these  
channels. Press the green button to go to  
the next step.  
Let the TV shape setting be 16:9 if you use  
an HDMI connection to your TV. Press the  
green button to confirm and start scanning  
for the available channels.  
Note  
In case your HD receiver does not find any  
channels, see the ‘What if no channels are  
found?’ section on page 12.  
Note  
If you are in an area that receives signals  
from more than one network and possibly  
variant of the same channel (e.g. BBC1,  
BBC1 Scotland), then your HD receiver  
will prompt you to select the network and  
channel variant that you want in the AllTV  
and All Radio lists.  
Note  
Digital terrestrial broadcasting is progressing  
throughout the UK. Please note that the  
reception of digital signals may need to be  
verified as it can be adversely affected by  
physical elements, such as mountainous  
areas, high buildings, etc.When analogue  
broadcasting in your region is switched off,  
there should be a quality improvement in  
digital broadcasting.As digital switch over  
happens, the number of digital channels  
available in each region may also increase.  
Please visit this website to find out when the  
digital switch over is scheduled for your area:  
Getting started  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On the Code entry menu, use  
/
or the 3.4  
What if no channels are found?  
In case your HD receiver does not find any  
channels, check your connections (see pages  
10 and 29) and press the red button to start  
the first installation setup again.  
number buttons to enter your area’s postal  
code, and then press OK to highlight PIN  
code.  
Note  
If your HD receiver is still not able to find  
Entering your postal code is mandatory.  
You will not be able to complete the first  
installation setup without entering your  
postal code.  
any channels, press the yellow button.  
Use  
/
to manually check the quality  
and strength of the signals received by your  
antenna in various channel frequencies.  
To change the default PIN code (0000),  
press and use the number buttons to  
enter you new PIN code.You will then be  
prompted to re-enter your PIN code to  
confirm.  
If the Signal strength bar is green, then  
your antenna and HD receiver are properly  
connected. If it is red, then you need to first  
check your connection. If the Signal quality  
bar is green, then you can be sure that you  
are receiving digital broadcast signals. If  
your reception is not optimal (few channels  
or “blocky” image), you must check your  
antenna installation as it may need to be  
realigned or fixed.  
Note  
Your new PIN code can be any 4-digit  
number other than the default PIN code  
(0000).  
Press the green button to confirm your  
choice and complete the installation.  
You can now start using your HD receiver.  
12  
Getting started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.5  
Using the channel banner  
4
Using your HD receiver  
Channel information  
4.1  
Standby/wake up  
When you change a channel, the channel banner  
appears briefly to show information about the  
current programme. By default, it appears for  
To put your HD receiver into standby, press  
on your HD receiver’s front panel or remote  
control.To take your HD receiver out of standby, 5 seconds.To set the length of time that the  
press again.You can also press BACK  
,
channel banner remains on-screen, see page 23.  
P+/P- or any number button on your remote  
control to wake up your HD receiver.  
See page 6 for more information.  
Note  
While recording a programme to an external  
recording device such as aVCR, the channel  
banner overlay will not be recorded.  
4.2  
Switching on and off  
Use the ON/OFF switch on the rear panel of  
your HD receiver to switch your HD receiver  
on/off. See page 6 for more information.  
Changing channel  
To change the channel, display the channel  
banner by pressing INFO.  
4.3  
Changing channels  
When the channel banner is on-screen,  
To change channels, use the P+/P- on your  
remote control or your HD receiver’s front  
panel.You can also use the number buttons on  
your remote control.  
use  
/
to see what programmes are  
currently showing on other channels. If you  
see a programme you want to watch,  
press OK.  
Press BACK to switch to the last channel  
you were watching.  
You can also use the on-screen channel lists or  
channel banner to change channels (see sections  
4.5 and 4.6).  
Note  
Initially, HD programmes are available only on  
channels 50 and 51. Switch to these channels to  
watch HD programmes.  
To display more information about the  
4.4  
Adjusting volume  
current programme on the channel listed in  
To increase or decrease the volume, press  
VOL+/VOL-.The volume level is shown briefly  
on your TV.  
the channel banner, press INFO  
again.  
To mute or restore the sound, press .When  
you mute your sound, the  
icon is shown  
in the top right corner of your TV.This icon  
disappears after a few seconds.  
Using your HD receiver  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To display what programme is on next (on the channel listed in the channel banner), press the  
yellow button.  
Press INFO  
a third time, or press EXIT to remove the channel banner without changing  
the channel.Alternatively, press BACK to return to the channel banner.  
4.5.1 More about the channel banner content  
14  
Using your HD receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.6  
Using channel lists  
4.7  
Using theTV guide  
You use the channel list menu to switch to any  
TV or radio channel from the AllTV or  
All Radio channel list, or your favourite lists.  
The TV guide provides you with a listing of  
all programmes available on all channels for  
up to eight days, making it easy to find the  
programmes you want to watch.  
Changing channel  
Press GUIDE  
to display the TV guide.  
Press OK to display the current channel list.  
Use  
/
to select the channel you want to  
watch.  
Press OK to preview the channel; press OK  
again to watch it.  
Changing current channel list  
Press OK to display all the channels of the  
current channel list.  
Use  
at different times on a channel.  
Use to move through the list of  
channels.  
/
to see what programmes are on  
/
Use the green (+1 day) and red (-1 day)  
buttons to move forward and backwards by  
a day through the listings.  
Use the blue button to see what  
programmes are on from 18:00 hours  
onwards.  
Use the yellow button to jump directly to  
the programme list for any of the  
next 7 days.  
Press to display all the available channel  
and favourite lists.To create new favourite  
lists, see page 21.  
Use  
use.  
/
to highlight the list you want to  
Press GUIDE , BACK or EXIT to  
Press OK to confirm and display all the  
remove the TV guide.  
channels of the selected list.  
Use  
/
to highlight a channel and press  
Notes  
OK to preview it. Press OK again to watch  
the channel or press EXIT to remove the  
channel list menu without changing the  
channel.  
You can also schedule a recording using the  
TV guide (see page 16).  
• Some channels may not offer an extensive  
TV guide.  
Using your HD receiver  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.8  
Scheduling/stopping recordings  
To record a programme, you must first connect  
your HD receiver to yourVCR or any recording  
device using a SCART cable (see page 28), and  
then schedule a recording using the TV guide  
or by setting a recording timer.  
UsingTV guide  
Press GUIDE  
Use  
to display the TV guide.  
to highlight the  
/
/
/
programme you want to record and press  
OK. In the menu that pops up, press one of  
the following:  
OK again to confirm the scheduling of the  
recording.  
HOWTO STOP A RECORDING?  
When a programme is being recorded, you  
cannot switch to any other channel or use any  
of the other features of your HD receiver. TO  
EXIT to return to the TV channel that you STOP/CANCEL A RUNNING RECORDING  
were watching prior to displaying the TV  
Guide.  
and return to normal live TV, press EXIT first  
then OK immediately after.  
BACK to return to the TV Guide.  
Using recording timers  
Press MENU. to display the Main menu.  
Make sure that TV guide & scheduling  
is highlighted and press or OK.The TV  
guide & scheduling menu appears.  
In the TV guide & scheduling menu, use  
/
to highlight Scheduled recordings  
and press or OK.  
The Scheduled recordings menu appears.  
IMPORTANT NOTE:  
If the scheduling is made on a ‘Now’  
programme (highlighted in blue), your HD  
receivers starts recording instantly and  
is locked on the programme to secure  
its recording.Any attempt to control the  
receiver displays rEC on your HD receiver’s  
front panel.You must STOP the recording to  
recover the control of your receiver.  
If the scheduling is made on a later  
To schedule a new recording, make sure  
New timer is highlighted and press or  
OK.The New manual recording menu  
appears.  
programme, your HD receiver will record  
it at the set date and time.The program is  
highlighted in red in the TV Guide.  
16  
Using your HD receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
Use  
/
to highlight the setting you want  
If parental control is on while scheduling  
a recording on a locked channel, we  
recommend you to go to the Parental  
control menu and enter your PIN code  
(then reported as “Typed in”). In that case,  
the recording will start automatically.  
to change.  
Press or OK and then press  
/
to  
select an option from the list that appears  
on the right.You can change these settings  
using the Tools menu:  
Use  
/
to highlight the setting you want  
Settings  
Options  
to change and press or OK. Use  
/
to change it and press the green button to  
confirm the recording timer.  
Subtitles  
On  
Off (default)  
Press the red button to cancel the recording  
timer and return to the Scheduled  
recordings menu.  
Audio language  
Available languages  
depend on the  
broadcast  
To delete an already scheduled recording,  
use  
/
to highlight it and press the red  
programme.  
button.  
Audio description On  
Off (default)  
Audio desc. level  
Set the audio  
description volume.  
(Available if  
‘Audio description’  
is turned on and  
broadcast.)  
Press EXIT to return to watching live TV or  
press Menu to return to the Main menu.  
Lip sync  
Set the DIGITAL  
audio output delay to  
synchronise audio  
with video.  
4.9  
Using theTools menu  
You use the Tools menu to display subtitles,  
change the audio language, control audio  
description and synchronise audio with video.  
Press to save your changes and return to  
the tools menu.  
Press OPTIONS  
menu.  
to display the Tools  
Press OPTIONS , BACK or EXIT  
to remove the tools menu.  
Using your HD receiver  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Using more of your  
HD receiver  
5.1  
HD receiver  
Front panel  
Rear panel  
1
3
5
6
8
10  
6
1
5
4
7
9
2
3
4
7
2
1
Standby indicator:  
1
2
3
Antenna IN*:To connect your aerial  
cable from the wall socket  
Red: initialisation mode and standby  
mode  
ToTV/VCR*:Antenna output to TV/VCR  
(antenna signal)  
Orange: active-standby mode  
standby button:Switches your HD  
receiver into or out of standby  
P+ & P- buttons:To change channel up  
or down  
Res button:To change the HDMI output  
resolution to Auto (default), 576i,  
576p, 1080i or 1080p  
V-Out button:To change the active video  
output to HDMI (default) or SCART  
Display: 4-digit display  
HD indicator: Lights up when  
you are watching an HD channel  
2
3
4
Ethernet*:To connect your HD receiver  
to an Internet access point  
4
5
USB 2.0*: Universal Serial Bus port  
HDMI*:To connect to the HDMI input  
connector on your high-definition TV  
AUX SCART*:To connect to the  
SCART connector on your standard-  
definition TV or any recording device  
such as aVCR.  
6
5
6
7
7
DIGITAL audio out*:To connect an  
hi-fi amplifier  
AUDIO L + R*:To an hi-fi amplifier  
ON/OFF switch:To switch on/off your  
HD receiver  
8
9
10 Power*:To connect the 12V power supply  
unit  
* Safe extra low voltage  
18  
Using more of your HD receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2  
Remote control  
1
2
1
Switch to standby or wake  
up from standby  
3
19  
4
2
3
MENU  
Open/close ‘Main’ menu  
Switch between radio and  
TV channels  
TEXT  
RADIO  
EXIT  
18  
RADIO  
5
6
GUIDE  
OPTIONS  
4
5
EXIT  
Remove menus, channel  
banner and channel lists  
17  
Colour buttons Used in contextual menus  
and MHEG applications  
7
16  
6
Open/close ‘Tools’ menu  
7
U, D, L, R  
Move up/down/left/right  
within lists or menus  
INFO  
8
15  
14  
8
Return to the previous  
channel or menu screen  
Change channel up/down  
9
P +/-  
10 Number buttons Alphanumeric keypad  
9
13  
11  
Turn subtitles on/off  
TurnAudio Description on/off  
Turn volume up/down  
Mute/restore sound  
Open/close channel banner  
Confirm selection or  
schedule a recording in the  
‘TV guide’  
12 AD  
13 VOL +/-  
14  
15  
10  
11  
16 OK  
12  
AD  
17  
Open/close ‘TV guide’  
Open/close MHEG  
applications  
18 TEXT  
19  
Change picture format  
setting  
DIGITAL RECEIVER  
Using more of your HD receiver  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.3  
Front-panel display messages  
Your HD receiver is starting up  
Your HD receiver is tuned to TV channel 25.  
Your HD receiver displays r025 when it is tuned to radio channel 25.  
- rEC is displayed each time you press a button on your remote control to  
indicate that:  
• A recording is in progress  
Your HD receiver is locked on to the programme being recorded  
-To unlock your HD receiver, you must stop the recording by pressing EXIT  
and then OK.  
Antenna signal is not available  
Subtitle on.  
oFF indicates that subtitles are turned off.  
Main menu is open  
Channel list is open  
TV guide is open  
Your HD receiver is switching to standby mode  
HDMI is the active A/V output (recommended) of your HD receiver  
AUX SCART is the active A/V output of your HD receiver  
Picture format is 4:3 with black bars – 16:9E indicates that the picture format  
is 4:3 stretched to 16:9 – 16:9o indicates that the picture format is 4:3  
zoomed in to the screen width.  
Software update is starting – L0 to L100 indicate that the software is being  
loaded – S0 to S100 indicate that the software is being loaded – End indicates  
a successful update – FAiL indicates a failed update.  
Automatic resolution adjustment (recommended) – other possible settings are  
indicated as 576i, 576P, 720P, 180i (for 1080i) and 180P (for 1080p).  
Your HD receiver is in the first installation setup  
20  
Using more of your HD receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.4  
Using the Main menu  
Use  
/
to highlight either TV channels  
Press MENU to display the Main menu.  
or Radio channels, and press or OK.  
The menu now displays the selected full  
channel list (AllTV or All Radio) and the  
existing favourite lists.  
Use  
/
to highlight a setting.  
Press or OK to confirm your choice.  
Press BACK to return to the Main  
menu. Press BACK again, MENU or  
EXIT to remove the Main menu.  
Press the red button to create a new  
favourite list.Your HD receiver, by default,  
names the new favourite list as List1 (for TV  
channels) or RLst1 (for radio channels).You  
can create up to four separate TV and radio  
favourite lists.To rename these lists, see  
page 22.  
Note  
Use the colour buttons to perform contextual  
actions, which are described at the bottom of  
the screen.  
To add a channel to your favourite list,  
5.4.1 Managing favourite lists  
Your HD receiver allows you to create favourite  
lists that include the channels you watch  
the most.This lets you access your favourite  
channels quickly instead of scrolling through the  
entire list.  
use  
press OK.  
/
to highlight a channel and  
Creating a favourite list  
On the Main menu, make sure that  
Favourites is highlighted and press or  
OK.  
The Favourites menu appears.  
To remove a channel from your favourite list,  
use to highlight it and press OK.  
/
When you are finished adding all your  
channels, press the green button.  
Press to return to the Favourites menu.  
Using more of your HD receiver  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Renaming favourite lists  
To add a channel, press the red button.  
Then use to highlight the channel you  
From the Favourites menu, use  
/
to  
/
highlight either TV channels or Radio  
channels and press or OK.  
want to add and press OK. Press the green  
button to save your changes.  
The menu now displays the default channel  
list (AllTV or All Radio) and any existing  
favourite lists.  
To remove a channel, use  
it and press the green button.  
To reorder the channels in your favourite  
list, use to highlight a channel you want  
to move and press the blue button.  
Use to move the channel up or down  
/
to highlight  
Use  
/
to highlight the favourite list that you  
/
want to rename,and press the blue button.  
In the Rename list menu that pops up,  
/
use  
/
or the number buttons to  
and press OK.  
rename your favourite list. Press the green  
button to confirm or press the red button  
to return to the previous menu without  
saving any changes.  
Press to return to the Favourites menu.  
Deleting favourite lists  
From the Favourites menu, use  
/
to  
highlight either TV channels or Radio  
channels and press or OK.The menu  
now displays the default channel list (AllTV  
or All Radio) and any existing favourite lists.  
Use  
/
to highlight the favourite list that  
you want to delete, and press the green  
button.  
Press or BACK to return to the  
Favourites menu.  
Press or BACK to return to the  
5.4.2 Using the Settings menu  
Favourites menu.  
You use the Settings menu to customise your  
HD receiver. For example, you can lock certain  
channels, change display settings, etc.  
Modifying/Editing favourite lists  
From the Favourites menu, use  
/
to  
highlight either TV channels or Radio  
channels and press or OK.  
Accessing the Settings menu  
From the Main menu, use  
/
to highlight  
The menu now displays the default channel  
list (AllTV or All Radio) and any existing  
favourite lists.  
Settings and press or OK.  
The Settings menu appears.  
Use  
/
to highlight the favourite list that  
you want to modify, and press or OK.  
Press or BACK to return to the  
Main menu.  
22  
Using more of your HD receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting your preferences  
You can set this to Activated, Not  
activated, Auto when no correct  
audio (default), Auto when audio is  
muted or For hearing-impaired.  
Subtitles language - Use this to set your  
preferred language for subtitles to English  
(default), Gaelic, Welsh or Irish.  
From the Settings menu, use  
highlight Preferences and press or OK.  
The Preferences menu appears.  
/
to  
Recording  
Record Link - Use this setting to enable  
or disable the control, by your HD receiver,  
of the start-stop recording function of your  
Video or DVD-R recorder (see the note  
on page 29).  
Use  
/
/
/
/ OK to navigate through  
the settings and options, and make changes.  
Press or BACK to save your changes  
and return to the previous menu.  
Analog output  
Video on AUX Scart - Use this to set  
the type of analogue video signals that are  
output on the AUX SCART connector of  
your HD receiver.You can set this to RGB  
(default whenV-Out is set to AV) or CVBS  
(default whenV-Out is set to HDMI).  
Audio on AUX Scart - This setting  
applies when your HD receiver is  
You use the Preferences menu to change  
these settings:  
Display  
Banner duration - Use this to set the  
length of time (3 to 10 seconds) that the  
channel banner remains on-screen when  
you change channel. By default, it is set to  
5 seconds.  
Timer warning duration - Use this  
to set how soon before the start of a  
program should the record-timer alert  
you.The available options are 30 seconds  
before, 1 minute before (default), 2  
minutes before or 5 minutes before.  
Front panel brightness - Use this to set the  
brightness of the front-panel display.You can  
set this to Low,Medium (default) or High.  
connected via a SCART Cable to a  
standard-definition TV. Use this to set the  
type of analogue audio signals that are  
output on the AUX SCART connector  
of your HD receiver.You can set this to  
Mono or Stereo (default).  
TV format - Use this to set the format  
of the analogue video that is output on  
the AUX SCART connector of your HD  
receiver.You can set this to 4/3 Letter Box,  
4/3 Centre Cut Out or 16/9 (default).  
The options determine how widescreen  
(16:9) programmes show on a standard-  
definitionTV with aspect ratio of 4:3.  
Language preferences  
Information language - Use this to  
set your preferred language for displaying  
programme information to English  
(default), Gaelic, Welsh or Irish.  
Audio language - Use this to set your  
preferred audio language to English  
(default), Gaelic, Welsh or Irish.  
Default subtitles mode - Use this to set  
how you prefer to display subtitles.  
Digital output  
HDMI output resolution - Use this to  
set the HDMI video resolution to 576i,  
576p, 720p, 1080i, 1080p, Auto (default)  
or Original. Note that you can also  
change this setting using the RES button  
on the front panel of your HD receiver.  
Using more of your HD receiver  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio capabilities on HDMI - Use this  
to set the HDMI audio format to PCM  
(default) or Auto*.  
Default volume  
Use this to set the default volume at wake-  
up of your HD receiver.  
Audio capabilities on S/PDIF - Use this  
to set the S/PDIF audio format to PCM  
(default) or Dolby Digital*.You can also  
set this to Not connected.  
Changing parental control settings  
From the Settings menu, use  
/
to  
highlight Parental control and press or  
Easy Link mode - For future use.  
TV format - Use this to set the format  
of the high-definition video that is output  
on the HDMI connector of your HD  
receiver.You can set this to 16/9 Pillar Box  
(default), 16/9 Full Screen or 16/9 Zoom.  
These options determine how standard  
(4:3) programmes show on aTV with aspect  
ratio of 16:9. Note that you can directly  
change this setting using the picture  
OK.The Parental control menu appears.  
format button  
on your remote control.  
* The Auto and Dolby Digital settings on  
HDMI or S/PDIF are not recommended until  
your HD receiver has been updated with the  
appropriate software.  
To change the parental control severity settings,  
use  
and press or OK.  
Use to highlight the severity level you  
/
to highlight Parental control limits,  
/
check if the relevant software update is available.  
want to set,and press or OK to save your  
changes and return to the previous menu.Note  
that if you set the Parental control limits to  
Off,the child timers and channel lock settings  
(see below) will not have any effect.  
Automatic eco mode  
Use this to set the time after which your  
inactive HD receiver automatically enters  
into the active standby mode.You can set  
this to off, 3 hours (default), 4 hours,  
5 hours, 6 hours, 7 hours or 8 hours.  
Note  
When Parental control limits is set to  
ON, menu items like Parental control and  
Set-up will be protected by the PIN code.  
Return channel  
Use this to configure your HD receiver to  
connect to the internet,which then serves as  
a return channel to your DigitalTV service  
provider.The return channel is necessary to use  
any interactive applications that your DigitalTV  
service provider may offer.Before configuring  
the return channel,be sure to connect your  
HD receiver to your network router using an  
Ethernet cable.Then choose either DHCP  
to set up your connection automatically or  
manually enter all the parameters like IP  
address,Network mask,Gateway and  
DNS settings to match your router’s settings.  
To create a new child timer, use  
/
to  
highlight Child timers, and press or OK.  
Make sure that Define child timer is  
highlighted and press or OK.  
24  
Using more of your HD receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
/
/
/
to set the time period  
during which you will be able to watch any  
unlocked channel without having to enter  
your PIN code. Press the green button to  
confirm.  
To delete the child timer, make sure Modify  
child timer is highlighted and press the red  
button.  
To modify the child timer, make sure Modify  
child timer is highlighted and press or  
OK. Make the required changes and press  
the green button to confirm.  
A progress screen displays to confirm that the  
search is taking place.  
To lock a channel, use  
Channel lock, and press or OK.  
Use to highlight the channel you want  
/
to highlight  
Press the green button to save any new  
channels and return to the Set-up menu.  
Press the red button to cancel the search and  
return to the Set-up menu.  
/
to lock, and press OK. Press or BACK  
to return to the previous menu.  
To change your PIN code,use  
/
to highlight  
Note  
Change PIN code,and press or OK.  
Use the number buttons to first enter  
your current PIN code and then enter  
your new PIN code. Use the number  
buttons to enter your new PIN code again,  
for confirmation. If you correctly entered  
the PIN codes, your HD receiver briefly  
displays a message confirming that your PIN  
has been changed, and then returns to the  
Parental Control menu.  
The Network messages menu (under the  
Settings menu) alerts you of any changes  
to your network such as recently added  
channels, services, etc.To save time, check  
this menu before retuning your HD receiver.  
Updating your HD receiver’s software  
manually  
You can manually update your HD receiver  
software using a USB memory stick.  
Download the latest software file from the  
Philips website (www.philips.com/support),  
unzip it and transfer it to a USB memory  
stick. Be sure to place the downloaded file  
in the top-level folder of your USB memory  
stick.  
Note  
Your new PIN code can be any 4-digit  
number other than the default PIN code  
(0000).  
Press or BACK to return to the  
Settings menu.  
Connect your USB memory stick to the USB  
connector on the rear panel of your HD  
receiver.  
Retuning your HD receiver  
From the Settings menu, use  
/
to  
From the Settings menu, use  
/
to  
highlight Set-up and press or OK.  
highlight Set-up and press or OK.  
In the Set-up menu that appears,  
make sure Channel installation is  
highlighted and press or OK.  
In the Channel Installation menu that  
appears, make sure Re-tune is highlighted  
and press or OK.  
In the Set-up menu that appears,  
use  
/
to highlight Software update and  
press or OK.  
Using more of your HD receiver  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
Resetting your HD receiver to the factory  
default settings erases all of your preferences  
and settings. For example, all of your favourite  
lists and recording timers will be erased.  
Changing other system settings  
From the Settings menu, use  
/
to  
highlight Set-up and press or OK.  
The Set-up menu appears.  
Your HD receiver locates the software  
available on your USB memory stick and  
displays a confirmation message. Press  
the green button to install the software  
immediately. Press the red button to cancel  
and return to the previous menu. If you  
press the green button, your HD receiver  
updates the software and restarts.You may,  
depending on the update, then be required  
to complete the first installation setup (see  
page 10).  
To turn on or off the channel updates  
that automatically happen when your HD  
receiver is in the active-standby mode, make  
sure Channel installation is highlighted  
and press or OK. Press to highlight  
Automatic update and press or OK.  
Restoring factory default settings  
From the Settings menu, use  
/
to  
highlight Set-up and press or OK.  
In the Set-up menu that appears,  
use  
/
to highlight Factory reset and  
Use  
/
to highlight On or Off.  
press OK twice.  
Press or BACK to save your changes  
and return to the previous menu.  
To check the signal quality of any channel  
that you are receiving, press to highlight  
Signal quality and press or OK.  
In the Signal quality test menu that  
appears, use  
/
to select a channel that  
you want to check. Press or BACK to  
return to the previous menu.  
To turn on or off powering your active-  
indoor antenna using the Antenna IN  
connector on the rear panel of your HD  
receiver, press to highlight Antenna  
A message appears asking you to confirm.  
If you are sure, press the green button, or  
press the red button to cancel and return  
to the previous menu. If you press the  
green button, your HD receiver restores  
the factory default settings and restarts.You  
will then be required to complete the first  
installation setup (see page 10).  
powering and press or OK. Use  
/
to  
highlight Off or On.  
Press or BACK to save your changes  
and return to the previous menu.  
26  
Using more of your HD receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
Set Antenna powering to On only if you  
need to power an active-indoor antenna that  
requires a 5V power supply not exceeding  
6
Maintenance  
50 mA current consumption. Be sure to read 6.1  
Cleaning  
your indoor antenna’s user manual before  
turning this setting on.  
For cleaning, use a soft, damp (not wet) cloth.  
Never use any abrasive cloth and aerosol  
cleaners  
To control antenna output, press to  
highlight Antenna output and press or  
6.2  
Replacing  
OK. Use  
mode or Always active.  
Press or BACK to save your changes  
and return to the previous menu.  
/
to highlight Inactive in eco  
Your HD receiver does not contain any user-  
serviceable parts. Do not attempt to open it.  
All maintenance work must be carried out by  
qualified service centres.  
Note  
6.3  
Disposing  
If Antenna output is set to Inactive in  
eco mode while Antenna powering is  
set to On, the device(s) connected to the  
ToTV/VCR output will not receive the  
antenna signal.  
Your HD receiver is designed and manufactured  
with high-quality materials and components,  
which can be recycled and reused.  
Please inform yourself about the local separate  
collection process for electrical and electronic  
products.  
To see information about your HD receiver,  
press and highlight System information.  
Details such as software version, model  
number, serial number, etc., are displayed on  
the right.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste.The correct disposal  
of your old product will help prevent potential  
negative consequences for the environment and  
human health.  
Press or BACK to return to the  
Settings menu.  
Maintenance  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recommended connection  
• Connect the HDMI output of your HD  
receiver to an HDMI source input of your  
amplifier.  
7
Accessories and  
connections  
7.1  
Connecting your audio equipment  
• Connect the HDMI output of your  
amplifier to an HDMI input of your TV.  
System settings  
HD receiver  
• For your HD receiver, set the Audio  
capabilities on HDMI setting (under  
Menu > Settings > Preferences >  
Digital output) to AUTO.  
TV  
• Select the correct A/V source on your TV.  
• Select the correct A/V source on your  
amplifier.  
A
B
C
HDMI  
Audio Equipment  
Volume controls and necessary Lip sync  
adjustments are performed by your  
amplifier. Refer to your amplifier’s user  
manual.  
L
R
Digital  
HDMI  
HDMI  
Analogue  
C
Option A – Electrical S/PDIF connection  
(Digital)  
Connect the DIGITAL audio output of your  
HD receiver to the relevant audio input of your  
audio equipment using an electrical S/PDIF cable  
(not supplied).  
Refer to the user manual of your audio  
equipment to choose the proper digital audio  
input.  
7.2  
Connecting your recording  
equipment  
1
Aerial wall  
socket  
HD receiver  
Note  
TV  
Mains wall  
socket  
With a digital connection via the DIGITAL  
output of your HD receiver, mute and volume  
operations are managed by your audio  
equipment and not by your HD receiver.  
VCR  
2
3
SCART  
HDMI  
Option B – Analogue connection  
Connect the L/R audio outputs to the relevant  
audio inputs of your audio equipment using a  
double CINCH cable (not supplied).  
Refer to the user manual of your audio  
equipment to choose the proper analogue audio  
inputs.  
Connect the aerial cable (not supplied) from  
the aerial wall socket to the Antenna IN  
connector on the rear panel of your HD  
receiver.  
Use the supplied HDMI cable to connect the  
HDMI connector on the rear panel of your  
HD receiver to the HDMI input connector  
of your TV.  
Option C - HDMI connection  
Recent amplifiers are fitted with one or more  
HDMI source input(s) and one HDMI output.  
28  
Accessories and connections  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use a SCART cable (not supplied) to connect  
the AUX connector on the rear panel of your  
HD receiver to the SCART input connector of  
yourVCR or other recording equipment.  
Connect your HD receiver and other  
equipment to the mains.  
7.3  
Connecting your standard-  
definitionTV  
1
Aerial wall  
socket  
HD receiver  
Notes  
Double Scheduling  
To succeed making recording, do not  
forget to set timers on your video or DVD  
recorder according to your HD receiver’s  
recording schedulings.  
TV  
Mains wall  
socket  
2
SCART  
How to avoid double scheduling?  
Your recorder is fitted with a feature  
allowing its start-stop control compatible*  
with your HD receiver.  
Connect the aerial cable (not supplied) from  
the aerial wall socket to the Antenna IN  
connector on the rear panel of your HD  
receiver.  
Use a SCART cable (not supplied) to connect  
the AUX connector on the rear panel of your  
HD receiver to the SCART input connector of  
your standard-definitionTV.  
Connect your TV to the mains. Use yourTV’s  
remote control to select the SCART input  
connector, which is connected to your HD  
receiver, as the theA/V source. If necessary,  
refer to your TV’s user manual.  
Connect your HD receiver to the mains and  
wait until your HD receiver wakes up (‘InSt’  
appears on the front-panel display).  
Press the V-Out button on the front panel  
twice.‘AU’ now appears on the front-panel  
display and the ‘Welcome’ screen appears  
on your TV. See section 3.3, Installing your  
HD receiver, on page 10 for instructions on  
completing the first installation setup from  
step 3.  
* The recorder function is activated by the  
video signal at its SCART input. Once the  
function is active, the recording starts when  
video is on and stops when video is off.  
If yourVideo or DVD-R recorder supports  
the above function, the simple scheduling of  
your HD receiver will automatically control  
your recorder.  
Necessary system installation  
• Enable ‘Recorder Control’ on yourVideo  
or DVD-R recorder. Refer to the user  
manual of your recorder.  
Set the Recording link setting of your  
HD receiver (under Menu > Settings >  
Preferences > Recording) to ON.  
Note  
Optionally, you can also use the supplied RF  
cable to connect the RF output connector  
(labelled ToTV/VCR) of your HD receiver to  
the RF input connector of your TV.  
Accessories and connections  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Guarantee and service  
9
Technical data  
For the Philips warranty applicable to your HD  
receiver, please visit the Philips website:  
This product is in conformity with European  
95/47/EC and 2002/21/EC directives.  
The product complies with the following  
European council Directives: 2006/95/EEC and  
In case you do not have an Internet connection,  
please contact your local Philips Consumer Care 2004/108/EC.  
Centre (see page 37).  
Video decoding  
Standard definition  
• MPEG2 MP@ML  
• MPEG4 AVC MP@L3  
• Video bit rate 15 Mbit/s  
• Resolution: 576i max  
720x576 pixels interlaced  
• Picture format 4:3 et 16:9  
High definition  
• MPEG2 MP@HL  
• MPEG4 AVC HP@L4  
• Video bit rate 20 Mbit/s  
• Resolution of broadcast: 720p, 1080i  
Upscale up to: up to 1080p50  
• Content protection: HDCP on HDMI  
Audio Decoding  
• MPEGI layer I, II  
• Dolby Digital  
• HE-AAC stereo / Multichannel  
• Dolby Digital/HE AAC to stereo down-mixing  
• Dolby Digital Plus to Dolby Digital  
transcoding  
• HE-AAC to Dolby Digital transcoding*  
* Feature subject to future product software  
upgrade  
Convenience  
• Automatic installation  
• HD reception indicator  
• Automatic channel update  
• TV and Radio modes  
• 4 x favorite TV channel lists  
• 4 x favorite Radio channel lists  
• Program list editing:Add, Move, Delete  
• Parental control – Child lock  
• 8 days Electronic Program Guide  
30  
Guarantee and service  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Event timer 8  
• HDMI output  
• Event programming via EPG  
• DVB subtitling  
• AUX SCART configurable by menu  
- SCARTVCR configuration (for recorder)  
Outputs: CVBS*, fixed level L/R audio  
- SCART TV configuration (for a TV)  
Outputs: CVBS*or RGB/FB, fixed level  
L/R audio, Slow blanking  
• Digital TXT / MHEG with Interaction channel  
• Video scaling on HDMI output:Auto, Original  
576i, 576p, 720p, 1080i, 1080p50  
• Dolby Digital 5.1 audio output  
• ECO power management  
• IP address assignment: Manual or DHCP  
• Software update:  
• L/R analogue Audio output  
• Digital audio output:  
Cinch electrical SPDIF  
Update via OTA download  
• DC power inlet  
Local update via USB  
• RJ45  
• USB 2.0 (Master)  
Application system resources  
*Video standard: PAL  
• Processor STi 7105  
Accessories  
Reception - Demodulation  
• Reception of DVB-T broadcast (EN 300744)  
• Reception of DVB-T2 broadcast (acc.D-Book 6.1)  
• Demodulation type: COFDM FFT  
• Input frequency range: UHF IV /V  
470 – 862 MHz  
• Remote control  
Protocol: RC6  
• Batteries: 2 x 1.5V type AAA/R03  
• User manual  
• QSG  
• Freeview flyer  
• Active RF Loop-through:  
• Retune flyer  
Bandwidth 47 - 862 MHz  
• HDMI cable  
Switch to passive loop-through in  
standby mode  
• Coaxial RF cable  
• AC/DC power adaptor incl. mains cord  
• Channel bandwidth (BW): 8 MHz  
• Network: MFN / SFN  
Miscellaneous  
Temperature range (°C)  
Operating +5 to +45 °C  
Storage -25 to +70 °C  
• Mains:AC 230V +/- 10%, 50 Hz  
• Power consumption: < 6 W  
Standby: < 1 W  
Antenna control for indoor aerial  
• Via RF IN connector  
• DC powering : 5Volts / 50 mA  
• Switchable via menu: On/Off  
Front-panel display / buttons  
• 4 x 7 segment LED display  
• 1x bi-color LED  
Off mode: < 0.3 W  
• Weight: 1.4 kg  
Including packaging: 2.3 kg  
• Dimensions:  
• 1x blue LED  
• 5 x Buttons: Standby, P-, P+, Res,V-Out  
Product (mm) 290 x 160 x 37  
Packaging (mm) 370 x 235 x 70  
Rear panel connections  
• RF in: type IEC 169-2 female  
• RF out: type IEC 169-2 male  
Due to continued product improvement, this  
specification may change without notice.  
Technical data  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your HD receiver seems to be switching  
off automatically after some time.  
10 Frequently asked  
questions  
If your receiver automatically goes into standby  
mode (standby indicator on the front panel lights  
up), this is due to the Eco mode.The Eco mode  
is set to 3hours, by default (environmentally  
friendly product).To modify it, go to Menu >  
Settings > Preferences > Automatic Eco  
mode, and choose a different value. See page 24.  
Connection  
Your HD receiver does not display any  
digitalTV channels on yourTV.You may  
also see the on-screen message “Signal  
lost”.  
Check that the aerial cable from the aerial  
wall socket is correctly connected to your  
HD receiver (see page 10).  
There may be a temporary problem with  
the reception, caused, for example, by bad  
weather; try again later.  
Check if there is any network message  
related to this signal loss.You can access the  
Network messages menu from Menu >  
Settings > Network messages.  
Your remote control is not working.  
Make sure that you point your remote  
control directly at your HD receiver and  
that nothing is between it and your HD  
receiver.The standby indicator on your HD  
receiver’s front panel should flash each time  
you press a remote control button.  
Check the batteries and replace them, if  
necessary.  
If rEC is displayed (on the front-panel  
display) everytime you press a button on  
your remote control, see below.  
Setup  
Your HD receiver does not seem to be  
working and there are no lights on the  
front panel.  
Your HD receiver displays “rEC” on the  
front-panel display each time you press a  
button on your remote control and your  
HD receiver is locked.  
A recording is running, which locks your HD  
receiver.To unlock your HD receiver, you must  
STOP THE RECORDING by pressing EXIT and  
then OK.  
Check that the 12V power supply unit is  
correctly connected to your HD receiver.  
Ensure that the ON/OFF switch on the  
rear panel of your HD receiver is switched  
on (is in the ‘1’ position).  
Your HD receiver does not seem to be  
working and a channel number is shown  
on the front-panel display.  
The picture is not displayed on your  
HDTV and an HDCP authentication error  
is displayed.  
Check that all connections are properly  
made (see page 10).  
Check that your TV is plugged into the mains Your HDTV does not support HDCP, which  
and that it is switched on.  
allows your HD receiver to transmit full-  
resolution video to your HDTV.As a result, the  
HDMI output displays a message masking the  
video, which asks you for changing the resolution  
down to 576p (see page 18 - Res button).  
Check that you have selected the correct  
A/V channel/source on your TV depending  
on how your HD receiver is connected to  
it (that is, using HDMI or SCART). Refer to  
your TV’s user manual for instructions.  
32  
Frequently asked questions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The picture seems to be stretched or  
squashed.  
Check the TV format setting under Digital  
output or Analog output (Main > Settings  
Your HD receiver seems to lock up or get  
stuck while retuning it to search for new  
channels.  
In parts of the country where the analogue TV  
> Preferences).Alternatively, press the picture services have already been switched off, the time  
format button on your remote control to taken to retune can increase.This is because  
scroll through the different settings.Also refer to your HD receiver scans for all the transmitters  
your TV’s user manual.  
in your area, which can take up to 15 minutes.  
Please wait for the retune to complete.This is  
not a fault.  
Your HD receiver displays ‘err’ on the  
front-panel display when you plug in a  
USB memory stick.  
You cannot find all the channels you think  
Reformat your USB memory stick using a  
should be available even after retuning  
computer. Ensure that the filesystem is FAT16 or your HD receiver.  
FAT32.  
The missing channels may not be available  
in your area. Check your coverage on the  
Your antenna may need to be upgraded  
(signal power, position, orientation or  
cabling).  
A signal booster may be fitted on your  
antenna. Consider having this removed as  
amplifiers are normally not required after  
the digital switch over.Too high a signal level  
can cause your HD receiver to skip some  
channels.  
Some early digital receivers manufactured  
prior to 2004 support only the 2K mode  
of digital transmissions.As part of the  
digital switch over, the UK Freeview TV  
platform will be upgraded to a more robust  
transmission standard.The change in  
transmission standard has been authorised  
by OFCOM and the new standard is  
supported by products that have the “Digital  
Tick”.  
If you have a SKY box, switch it to standby  
mode and then retune the terrestrial  
receiver. If it then receives all expected  
Freeview channels, then the modulator  
needs adjusting on your Sky box. Contact  
Sky to find out how to adjust the modulator.  
You cannot find all the channels you think  
should be available.  
Retune your HD receiver (see page 25).  
Alternatively, reset your HD receiver to its  
factory default settings (see page 26) and  
proceed with the first installation setup.  
Note  
During the first installation, your choice of the  
network may affect the number of installed  
channels.  
You do not find any HD channels.  
Initially, HD programmes are available only on  
channels 50 and 51. Switch to these channels.  
Note that the HD indicator on the front panel  
of your HD receiver lights up while watching an  
HD channel.  
Digital terrestrial broadcasting is progressing  
in the UK.As digital switch over happens, the  
number of digital channels available in each  
region may also increase. Please visit one of the  
following websites to find out when the digital  
switch over is scheduled for your area:  
checker for HD)  
Frequently asked questions  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your HD receiver found all the expected  
channels after you retuned it. However,  
when you turned on your HD receiver the  
next day, the picture was breaking up and  
some channels were missing.  
You get a picture or a freezed picture,  
a program number on the front display  
and your receiver seems blocked while  
not responding to the remote control  
commands.  
Your HD receiver has an automatic retuning  
feature; this allows it to keep up to date with  
Your HD receiver has hung up.You have to reset  
your HD receiver. Press the standby button on  
minor service changes. However, when the signal the front panel until Init is shown on the front-  
level of nearby relay transmitters are high or  
if the antenna signal is being amplified, these  
problems can occur.  
panel display.  
If you have tried all of the actions suggested  
above and still are not able to resolve the  
problem, contact your local Philips Consumer  
Care Centre (see page 37).  
To solve this problem:  
Turn off the automatic channel updates  
feature of your HD receiver (see page 26).  
Remove any signal amplifiers or boosters  
that are fitted on your antenna.These are  
not required after the digital switch over.  
Check that your antenna is aligned properly  
and is a model adapted for digital signal  
reception in your area. If you are not sure,  
please use the services of a recognised CAI  
antenna installation company.  
Although you set Audio capabilities to  
“Auto” for HDMI or “Dolby Digital” for  
S/PDIF, your HD receiver does not deliver  
Dolby Digital 5.1 multi-channel audio  
output.  
Your HD receiver needs a software upgrade.  
to check if the appropriate software for  
ugrading your HD receiver via USB is  
available.  
Set the Audio capabilities setting to PCM  
until the upgrade of your HD receiver is  
done.  
34  
Frequently asked questions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 Glossary  
Analogue audio  
EasyLink  
Analogue sound is output from the LEFT/RIGHT The Philips EasyLink™ technology enables you  
audio connectors on the rear panel of your HD  
receiver.The red and white sockets send audio  
through two channels, the left and right.  
to control multiple devices, which are connected  
through standard HDMI cables, using a single  
remote.  
Aspect ratio  
Aspect ratio refers to the length-to-height ratio  
of TV screens.The aspect ratio of a standard  
TV is 4:3, while the ratio of a high-definition  
or widescreen TV is 16:9.The letterbox format  
HDCP  
High-bandwidth Digital Content Protection  
(HDCP) is a type of digital copy protection  
system.When your set-top is attached via an  
allows you to watch a video with a wider aspect HDMI cable to an HDCP-compliant HDTV,  
ratio on a standard 4:3 TV.  
the HDTV and set-top negotiate a secure  
link, which allows your set-top to transmit full  
resolution video to your HDTV.  
DHCP  
Dynamic Host Configuration Protocol (DHCP)  
is a network protocol that enables a router or  
server to automatically assign IP addresses to  
devices that are part of its network.  
HDMI  
High-Definition Multimedia Interface (HDMI) is  
a high-speed digital interface that can transmit  
uncompressed high-definition video and digital  
multi-channel audio. It delivers perfect picture  
and sound quality, completely free from noise.  
HDMI is fully backward compatible with DVI.  
Digital audio  
Digital sound is available when you use the  
DIGITAL audio connector (coaxial S/PDIF)  
on the rear panel of your HD receiver.These  
sockets send audio through multiple channels,  
instead of just two channels as analogue does.,  
HDTV  
High-Definition Television  
Dolby Digital  
Lip Synchronisation  
A surround sound system developed by Dolby  
Laboratories containing up to six channels of  
digital audio (front left and right, surround left  
and right, centre and subwoofer).  
Setting used to synchronise audio with video  
in case a delay is experienced, in particular, if  
speech does not match lip movements.  
DVB  
MPEG  
DigitalVideo Broadcasting  
Motion Picture Experts Group.A collection of  
compression systems for digital audio and video.  
EPG  
Electronic Programme Guide  
PIN Code  
A 4-digit code used to prevent access to  
inappropriate programmes (parental control).  
Glossary  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SDTV  
12 Index  
Standard-Definition Television.  
Surround  
Change channel, 13 -15  
Channel banner, 13, 14  
Connect  
A system for creating three dimension sound  
fields full of realism by arranging multiple  
speakers around the listener.  
HDMI, 10  
SCART, 29  
Control volume, 13  
USB memory stick  
A small size storage device, which is used to  
update your HD receiver’s software (see  
page 25). Connect it to the USB 2.0  
connnector on the rear panel of your HD  
receiver.  
Favourite lists  
Create, 21  
Delete, 22  
Modify, 22  
Rename, 22  
Front panel, 18  
Indoor antenna  
Setting, 26  
Powering, 10, 27  
Install  
First installation, 10  
Rear panel, 18  
Record  
Programmes, 16  
Stop, 16, 32  
Remote control, 19  
Restore factory settings, 26  
Retune, 25  
Return channel, 24  
Software update, 25  
System settings, 26  
Switch on and off, 13  
TV guide, 15  
Wake-up your HD receiver, 13  
36  
Index  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact information  
DTR 5520/05  
Serial number:  
UNITED KINGDOM  
Phone: 0800 331 60 15  
Contact information  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trademarks and partner logos  
The Philips wordmark and the Philips shield are registered trademarks of Koninklijke Philips  
Electronics N.V. and are used by Pace plc under license from Koninklijke Philips Electronics N.V.  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.  
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered  
trademarks of HDMI licensing LLC in the United States and other countries.  
Trademark of the DVB DigitalVideo Broadcasting Project (1991 to 1996)  
The FREEVIEW service is subject to coverage.The FREEVIEW, FREEVIEW+, FREEVIEW HD and  
FREEVIEW+HD words and logos are trademarks of DTV Services LTD. © DTV Services Ltd 2010.  
The “HD TV” Logo is a trademark of EICTA.  
100% recycled paper  
Pace and  
are trademarks and/or registered trademarks of Pace plc.  
38  
Trademarks and partner logos  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trademarks and partner logos  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2010 Koninklijke Philips Electronics N.V.  
All rights reserved.  
Document order number: 502-1040510  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentair Swimming Pool Pump IntelliComm User Manual
Philips Battery Charger LR20PS12C 10 User Manual
Philips Camcorder CAM300 User Manual
Philips Clock Radio A3980 User Manual
Philips Model Vehicle AT810 User Manual
Philips Projection Television 55PW9383 User Manual
Pinnacle Design TV Video Accessories TV29501 User Manual
Pioneer Computer Drive DE UH9101 User Manual
Poulan Trimmer 530087984 User Manual
Power Acoustik Musical Instrument Amplifier MID 65 User Manual