TV/DVD
Quick Use and Hookup Guide
CONTENTS
IMPORTANT
NOTE: This owner's manual is used with several different television
models. Not all features (and drawings) discussed in this manual will
necessarily match those found with your television set. This is normal
and does not require that you contact your dealer or request service.
Important Notice/Warning . . . . . . . . . . . . . . . . . . . . .1
Basic Antenna TV Connections . . . . . . . . . . . . . . . .2
Using the AV1 Inputs . . . . . . . . . . . . . . . . . . . . . . . .3
Using the AV2 Inputs . . . . . . . . . . . . . . . . . . . . . . . .3
Using the Component Video Inputs . . . . . . . . . . . . .3
Using the S-Video Inputs . . . . . . . . . . . . . . . . . . . . .4
Using the Monitor (Audio/Video) Outputs . . . . . . .4
Using the Side Audio/Video Inputs . . . . . . . . . . . . .4
Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . .1
Remote Battery Installation . . . . . . . . . . . . . . . . . . .1
Remote Control Button Descriptions . . . . . . . . . . . .1
Hooking Up the TV
The region code for this set is ALL or 1.
DVDs must be labeled for ALL regions or for
Region 1 in order to play on this TV/DVD
Player. You can not play Discs that are labeled for other regions. Look
for the symbols above on your DVDs. If these region symbols do not
appear on your DVDs, you can not play the DVD in this TV/DVD
Player.
ALL
1
Basic Cable TV Connections . . . . . . . . . . . . . . . . . .2
Basic Cable Box Connections . . . . . . . . . . . . . . . . .2
BASIC TV AND REMOTE OPERATION
TELEVISION
our television has a set of controls located on the font of
Ythe cabinet for use when the remote control is not needed.
Press the POWER button to turn the TV ON.
1
Press the VOL (+) button to increase the sound level or
the VOL (–) button to lower the sound level.
+
CHANNEL
+
–
VOLUME
–
CH
2
Pressing both buttons at the same time will display the
onscreen menu. After you are in the menu, use these buttons
to make adjustments or selections.
Side A/V Inputs
DVD Tray
Press the CH – (down) or + (up) button to select TV chan-
2
3
nels. Use these buttons to make adjustments or selections in
the onscreen menu.
Eject Button
3
Remote Sensor - Sensor for activating
remote control commands when the
remote is used to control the TV.
There is also a set of Audio and Video Input jacks located on the
side of the television cabinet. This jack panel also contains a head-
phone jack that when used will mute the TV speakers. These jacks
are great for connecting a video camcorder or any accessory device
that will only be hooked up temporarily.
POWER
Power Light Indicator - Light will
show while TV is powered on.
1
REMOTE CONTROL BATTERIES
o load the supplied batteries into the remote:
Installing the Remote
Control Batteries
Battery Compartment Door
T
Remote Control
(shown from the bottom)
Remove the battery compartment door on the back of
the remote.
1
Place the batteries (2-AA) in the remote. Be sure the (+)
and (–) ends of the batteries line up correctly (the inside of
the case is marked).
Be sure to point the
remote at the Remote
Sensor window on the
front of the television
when using the remote
control to operate the
television.
2
Reattach the battery compartment door.
3
2 “AA” Batteries
Battery Compartment
REMOTE CONTROL BUTTONS
POWER Button - Press the Power button to turn the TV on or off.
FORMAT Button - Allows you to choose between the 4:3 04 EXPAND 4:3
SLEEP Button - Press the Sleep button to set the TV to automatically turn itself
POWER
off after a set period of time..
screen modes.
SLEEP
EJECT
MODE (TV or VCR) Button - Press to place the remote in the TV or VCR
mode. When the desired mode is selected the green LED will light for a second
to indicate the present mode, TV or VCR.
SMILEY Button - Press to add channels in the “Quadra Surf” lists. Works with
all four colored buttons.
EJECT Button (DVD) - Opens/Closes the DVD disc tray and places the TV in
TV
VCR
MODE
the DVD mode.
SYSTEM MENU
OSD
SYSTEM MENU (OSD) Button (DVD) - Allows you to delete stored chan-
nels within the “Quadra Surf” lists for the four colored buttons.
FROWNIE Button - Allows you to delete stored channels within the “Quadra
AUDIO
REPEAT REPEAT A-B SUBTITLE
AUDIO Button (DVD) - Press to display the Audio menu when the DVD
player is active.
SMART SOUND
SMART PICTURE
Surf” lists for the colored buttons.
TV/DVD
SUBTITLE Button (DVD - Press to select the subtitle language.
REPEAT A-B Button (DVD) - When using the DVD player, press to repeat
REPEAT Button (DVD) When using the DVD player, press to repeat the
-
DVD
MENU
MENU
playback of a chapter, title, track or the disc.
the sequence in a title.
SMART SOUND Button - Press repeatedly to choose from different factory
pre-defined sound settings. Choose from Personal (how you set the Sound Menu
options), Voice (for programming with speaking), Music (for musical program-
ming), or Theatre (for watching movies).
MENU Button (TV) - Press to display the onscreen menu. Also can be used to
back out of the onscreen menu until it disappears from the TV’s screen.
CURSOR RIght, Left, Up or Down Buttons - Press to navigate, select and
adjust controls within the onscreen menu after the Menu button is pressed. These
buttons also can be used with a VCR, DVD or similar device and when in that
mode. Press the ᮤᮤ Left or ᮣᮣ Right to use as fast forward or fast reverse in
the VCR or DVD mode.
VOL(ume) + or – Buttons - Press the VOL + button to increase the TV’s
sound level. Press the VOL – button to decrease the TV’s sound level.
SMART PICTURE Button - Press repeatedly to choose from 4 different factory
pre-defined picture settings. Choose from Personal (how you set the Picture Menu
adjustment controls), Movies (when watching movies), Sports (for any sporting
event), or Weak Signal (used when the signal being received is not the best).
TV/DVD Button - When in the DVD Mode, press to toggle between DVD
viewing and TV viewing. When in the TV mode, this button will have no func-
tionality.
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
2
5
8
0
3
1
DVD MENU Button - Press to display the onscreen menu that is on the DVD
disc being played.
4
6
CH(annel) + or – Buttons - Press to select channels in ascending or descending
7
9
order.
A/CH
PLAY Button - When in VCR or DVD mode, press to start the play back of a
CC
MUTE Button - Press to eliminate the sound being heard from the TV. Press
again to restore the TV’s volume to it’s previous level.
OK • Button - Press the OK button to confirm selections and adjustments with-
in the on-screen menus. Also used with the Play button to start a VCR recording
when in the VCR mode.
DVD disc or VCR tape.
STOP Button - When in VCR or DVD mode, press to stop the play back of a
DVD disc or VCR tape.
NUMBERED (0-9) Buttons - Press the numbered buttons to select TV channels
or to enter certain values within the onscreen menu. For single channel entries,
press the numbered button for the channel you desire. the TV will pause for a sec-
ond or two before changing to the chosen channel.
Pause Button (DVD) - Press to pause the playback of a DVD disc or audio
CD. Pressing repeatedly will show frame-by-frame playback of a DVD disc.
CC Button - Press to activate the Closed Captioning options. Repeatedly press
A/CH Button - (Alternate Channel) Press to toggle between the last view chan-
the CC button with scroll the options available on the TV screen.
nel and the channel presently being viewed.
3139 125
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP THE TV
AV1 & AV2 INPUTS
24
1
he TV’s audio/video input jacks are for direct picture and
Tsound connections between the TV and a VCR (or similar
device) that has audio/video output jacks. Both the AV1 and AV2
Input Jack connections are shown on this page, but either one can
be connected alone. Follow the easy steps below to connect your
3
SVHS
Monitor out
AV2 in
AV1 in
AV2
BACK
OF TV
VIDEO
L/Mono
AUDIO
R
CVI
accessory device to the AV1 and AV2 in Jacks located on the back of
the TV.
P
P
S-VIDEO
AV1
Connect the VIDEO (yellow) cable to the VIDEO AV1 in
COMPONVIDEO INPUT
(or AV2 in) jack on the back of the TV.
1
Connect the AUDIO (red and white) cables to the
AUDIO (left and right) AV1 in (or AV2 in) jacks on the
rear of the TV.
AV1
Connection
2
2
4
2
Connect the VIDEO (yellow) cable to the VIDEO OUT
jack on the back of the VCR (either one or two) or acces-
sory device being used.
POWER
R
L
S-VIDEO
OUT
VIDEO
OUT
ANT/CABLE
OUT
3
4
5
6
1
AUDIO OUT
SLEEP
EJECT
TV
VCR
MODE
BACK OF VCR
SYSTEM MENU
OSD
Connect the AUDIO (red and white) cables to the
AUDIO (left and right) OUT jacks on the rear of the VCR
(either one or two) or accessory device being used.
AUDIO
REPEAT REPEAT A-B SUBTITLE
SMART SOUND
SMART PICTURE
TV/DVD
Turn the VCR (either one or two) or accessory device
and the TV ON.
DVD
MENU
MENU
7
Press the CH + or – buttons on the remote control to
select the AV1 channel for accessory device number one, or
the AV2 channel for accessory device number two. AV1 or
AV2 will appear in the upper left corner on the TV screen
depending on the channel chosen.
5
6
VCR ONE (or accessory device)
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
VIDEO IN
(YELLOW)
2
5
8
0
3
1
4
6
With either of the VCRs (or accessory devices) ON and a
AV2
Connection
prerecorded tape (CD, DVD, etc.) inserted, press the
PLAY button to view the tape on the television.
AUDIO IN
(RED/WHITE)
7
9
7
A/CH
CC
c
CHECK IT OUT
R
L
S-VIDEO
UT
VIDEO
OUT
ANT/CABLE
OUT
AUDIO OUT
Note: The Audio/Video cables needed for this connection are
not supplied with your TV. Please contact your dealer or Philips
at 800-531-0039 for information about purchasing the needed
cables.
3
4
VCR TWO (or accessory device)
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
7
5
COMPONENT VIDEO INPUTS
omponent Video inputs provide for the highest possible color
Cand picture resolution in the playback of digital signal source
material, such as with DVD players. The color difference signals
(Pb, Pr) and the luminance (Y) signal are connected and received
separately, which allows for improved color bandwidth informa-
tion (not possible when using composite video or S-Video connec-
tions).
CVI
BACK OF TV
Monitor out
AV2 in
AV1 in
2
VIDEO
L/Mono
Y
Connect the Component (Y, Pb, Pr) Video OUT jacks
Pb
Pr
AUDIO
R
from the DVD player (or similar device) to the (Y, Pb, Pr)
1
S-VIDEO
POWER
1
in(put) jacks on the TV. When using the Component Video
Inputs, it is best not to connect a signal to the AV1 in Video
Jack.
SLEEP
PONENT VIDEO INP
EJECT
TV
VCR
MODE
SYSTEM MENU
OSD
Connect the red and white AUDIO CABLES to the
Audio (left and right) output jacks on the rear of the acces-
sory device to the Audio (L and R) AV1 in Input Jacks on
COMPONENT
VIDEO CABLES
(Green, Blue, Red)
AUDIO
REPEAT REPEAT A-B SUBTITLE
2
SMART SOUND
SMART PICTURE
the TV.
TV/DVD
Turn the TV and the DVD (or digital accessory device)
ON.
DVD
MENU
AUDIO CABLES
(RED/WHITE)
MENU
3
Press the CH +, – buttons to scroll the available channels
until CVI appears in the upper left corner of the TV screen.
COMP VIDEO
4
S-VIDEO
OUT
VIDEO
OUT
AUDIO
Insert a DVD disc into the DVD player and press the
PLAY ᮣ button on the DVD Player.
VOL
CH
Y
Pb
Pr
R
OUT
L
MUTE
PAUSE
OK
STOP
PLAY
5
4
2
5
3
1
4
6
HELPFUL HINT
The CVI connection will be dominate over the AV1 in Video Input.
The description for the component video connectors may differ
depending on the DVD player or accessory digital source equip-
ment used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb).
Although abbreviations and terms may vary, the letters b and r
stand for the blue and red color component signal connectors,
and Y indicates the luminance signal. Refer to your DVD or
digital accessory owner’s manual for definitions and connection
details.
When a Component Video Device is connected as described, it is best
not to have a video signal connected to the AV1 in Video Input jack.
CC
0
5
ACCESSORY DEVICE
EQUIPPED WITH COMPONENT
VIDEO OUTPUTS.
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP THE TV
S-VIDEO INPUTS
AV2
CVI
he S(uper)-Video connection on the rear of the TV can provide
Tyou with better picture detail and clarity for the playback of
accessory sources than the normal antenna picture connections.
2
Monitor o
AV2 in
n
AV1
1
VIDEO
24
Y
NOTE: The accessory device must have an S-VIDEO OUT(put)
L/Mono
AUDIO
R
jack in order for you to complete the connection on this page.
Front
Pb
S-VIDEO
Connect one end of the S-VIDEO CABLE to the S-
VIDEO jack on the back of the TV. Then connect one end
Pr
COMPONENT VIDPUT
SVHS
1
the AUDIO (red and white) CABLES to the AV2 in
AUDIO L and R(left and right) jacks on the rear of the TV.
AUDIO CABLE
(RED/WHITE)
HELPFUL HINT
S-VIDEO
CABLE
Connect other end of the S-VIDEO CABLE to the S-
VIDEO OUT jack on the back of the VCR. Then connect
the other ends of the AUDIO (red and white) CABLES to
the AUDIO (left and right) OUT jacks on the rear of the
VCR.
The S-VIDEO and VIDEO AV2
in(puts) are in parallel. The S-
VIDEO input is dominant when in
use. If separate video signals are
connected to the S-VIDEO and
VIDEO AV2 in(puts), the signal
from the VIDEO AV2 in(put) will
not be usable.
2
POWER
SLEEP
EJECT
L
R
TV
VIDEO
OUT
S-VIDEO
OUT
ANT/CABLE
OUT
AUDIO OUT
VCR
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
1
BACK OF VCR
Turn the VCR and the TV ON.
2
SMART SOUND
SMART PICTURE
TV/DVD
3
DVD
MENU
Press the CH + or – buttons on the remote to scroll the
channels until SVHS appears in the upper left corner of the
TV screen.
MENU
Note: The S-Video and Audio
cables needed for this connection
are not supplied with your TV.
Please contact your dealer or Philips
at 800-531-0039 for information
about purchasing the needed cables.
4
VCR
6
(EQUIPPED WITH
S-VIDEO JACKS)
VOL
CH
5
3
Now your ready to place a prerecorded video tape in the
MUTE
PAUSE
OK
STOP
PLAY
VCR and press the PLAY ᮣ button
.
5
4
1
2
5
3
4
6
Audio System Connection
AUDIO CABLES
(Red & White)
MONITOR OUTPUTS
JACK PANEL
Located on the back of the TV
he Monitor (Audio/Video) out jacks are great for recording
Twith a VCR or used to connect an external audio system for
better sound reproduction.
R
L
T
AUX/TV INPU
Monitor out
AV2 in
AV1 in
1
For Audio System Connection:
VIDEO
T
PHONO INPU
Y
Connect one end of the R(ight) and L(eft) AUDIO
(Monitor Out) jacks on the TV to the R and L audio input
jacks on your amplifier or sound system. Set the audio sys-
tem’s volume to a normal listening level.
L/Mono
AUDIO
R
Pb
Pr
1
S-VIDEO
COMPONENT VIDEO INPUT
2
AV OUT
AUDIO L(eft) and R(ight)
Turn the TV and audio system ON. You can now adjust
the sound level coming from the audio system with the
VOLUME (+) or (–) button on the TV or remote control.
AUDIO SYSTEM
with AUDIO INPUTS
2
Second VCR Connection/Recorder
For Second VCR Connection/Recorder:
NOTE: Refer to page 9 for the proper hookup of the first VCR.
Follow the instructions on how to tune to the AV 1 channel to
view a pre-recorded tape.
Monitor OUT
VIDEO &AUDIO
L(eft) and R(ight)
3
JACK PANEL
Located on the back of the TV
The following steps allow you to connect a second VCR to
record the program while your watching it.
VIDEO CABLE
(Yellow)
Connect one end of the yellow Video Cable to the
Monitor out VIDEO plug. Connect the other end to the
VIDEO IN plug on the second VCR.
ANTENNA
IN
OUT
VIDEO
IN
OUT
AUDIO
IN
Monitor out
AV2 in
AV1 in
ANTENNA
IN
OUT
AUDIO
IN
OUT
VIDEO
IN
3
VIDEO
L
R
ANTENNA
OUT
Y
R
L
ANTENNA
OUT
no
AUIO
R
Pb
Pr
Connect one end of the red and white Audio cable from
the Monitor out AUDIO L and R plugs on the TV to the
AUDIO IN plugs on the VCR.
S-VIDEO
5
4
5
COMPONENT VIDEO IN
Turn the Second VCR ON, insert a black VHS tape and
it’s ready to record what’s being viewed on the TV screen.
AUDIO CABLES
(Red & White)
SECOND VCR
FIRST VCR (accessory device)
(Hookup from AV1 on previous page.)
4
SIDE AUDIO/VIDEO INPUTS
udio and Video Side Inputs are available for a quick connec-
Ation of a VCR, to playback video from a camera or attach a
gaming device. Use the CH + or – buttons on the remote control
to tune these inputs.
Jack Panel located
on the Side of TV
Front
1
Connect the video (yellow) cable from the Video output
on the Camera (or accessory device) to the Video (yellow)
Input located on the Side of the TV.
VIDEO
L
1
2
2
AUDIO
R
For Stereo Devices: Connect the audio cable (red and
white) from the Audio Left and Right Outputs on the
Camera to a Stereo to Mono adapter. Then plug the single
end of the adapter to the Audio In (white) jack on the Side
of the television.
Audio Cables
(red & white)
Video Cable
(yellow)
POWER
3
SLEEP
EJECT
TV
VCR
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
For Mono Devices: Connect one end of the audio cable
from the Audio Out jack on the device to the Audio In
(white) jack on the Side of the television.
AUDIO
LEFT RIGHT
VIDEO
SMART SOUND
SMART PICTURE
S-VIDEO
TV/DVD
DVD
MENU
MENU
Jack Panel
of Accessory Device
Optional
Headphones
Turn the TV and the accessory device ON.
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
3
Press the CH + or – buttons on the remote control to tune
the TV to the side input jacks. “Front” will appear on the
TV screen.
1
2
5
8
0
3
5
4
4
6
4
7
9
When headphones re used
the sound coming from the
TV speakers will be mute.
A/CH
CC
3
Press the PLAY ᮣ button on the accessory device to
view playback, or to access the accessory device (camera,
gaming unit, etc.).
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|