Wireless TV link
EN
SLV5400
Welcome
Quick start guide
Connect transmitter
Connect receiver
Enjoy
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect transmitter
1
Connect theVCR or DVD recorder
A
VCR
DVD recorder
If you have noVCR or DVD recorder,
proceed with the next step
TV1
1. Take the supplied transmitter (A)
2
3
2. Find the SCART cable from theVCR or
DVD recorder that is connected to TV1.
3. Unplug the SCART cable from TV1.
4. Plug the SCART cable into the 4-VCR/DVD
RECORDER port on the transmitter (A).
1
4
1
3
4
TV1
2
Connect your other video source
B
1. Find the SCART cable from your other
video source that is connected to TV1.
2. Unplug the SCART cable from TV1.
3. Plug the SCART cable into the correspon-
ding SCART port on the transmitter (A):
1-SAT:
1-STB:
2-AUX:
Satellite receiver
Set top box
Any auxiliary device
3-DVD PLAYER: DVD player
4. Repeat this for each other video source.
Connect TV1
C
1. Take the supplied SCART cable (D).
2. Plug one end into the TV1 SCART port on
the transmitter (A).
1
3
TV1
2
4
2
3. Plug the other end into the SCART port of
the TV.
TV1
3
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Firmly insert the SCART cables to the ports:
1. Plug the connector straight into the port.
2.Apply some force when you insert the connector.
Connect the power adapter
D
L
DC 12V
1. Take the supplied power adapter (E).
2. Plug the connector into the DC 12V power
connector on the transmitter (A).
Channel
1 2 3 4
R
3. Plug the adapter into the power outlet.
> The power light on the front comes on as red.
2
3
1
AC
Check the operation of TV1
E
1. Switch on TV1.
2. Switch on the connected video source.
3. Select the correct SCART input on TV1.
4. Check if TV1 shows the image of the video source.
> The transmitter is connected correctly.
Connect receiver
2
Preparation
A
1. Switch on the transmitter (A).
2. Switch on the video source.
3. Take these items:
STANDBY
SELECT
•
•
•
•
•
•
Receiver (B)
Remote control (C)
Remote control of a video source.
SCART cable (D)
SLVRELESS TV LINK TRANSMITTER
Power adapter (E)
1
This quick start guide (F)
4. Go to TV2.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect TV2
B
TV2
2
1. Take the supplied SCART cable (D).
2. Plug one end into the TV2 SCART port on
the receiver.
3. Plug the other end into the SCART port of
the TV.
1
3
TV2
Connect the power adapter
C
1. Take the supplied power adapter (E).
2. Plug the connector into the DC 12V power
connector on the receiver (B).
DC 12V
3. Plug the adapter into the power outlet.
> The power light on the front comes on as red.
2
3
1
AC
Check the operation of TV2
D
1. Switch on TV2.
TV2
2. Switch on the receiver (B).
3. Select the correct SCART input on TV2.
4. Point the remote control of the video
source to the receiver (B).
1
5. Operate the video source with its remote
control.
2
6. Check if TV2 shows the image of the video
source.
WIRELESS TV LINK RECEIVER
4
5
> The receiver is connected correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Result
TV2
TV1
SAT/STB
AUX
DVD player
VCR
DVD recorder
Enjoy
3
Example:View satellite programs on TV2
A
TV1
Your satellite receiver needs to be connected
to the transmitter (A) of the wireless TV link.
1
1. Switch on the transmitter (A).
2. Switch on TV2.
TV2
3. Switch on the receiver (B).
4. Select the correct SCART input on TV2.
5. Point the remote control of the satellite
receiver to the receiver (B).
2
3
6. Switch on the satellite receiver.
7. Operate the satellite receiver with its
remote control. Enjoy!
WIRELESS TV LINK RECEIVER
5
6
7
To view other video sources, replace ´Satellite
receiver´ with the name of the device used.
View video source on TV1
Remotely control the wireless TV link
B
C
1. Switch on TV1.
1. Remove the protective foil from the
2. Select the correct SCART input on TV1.
3. Operate the video source as usual. Enjoy!
supplied remote control (C).
2. Point the remote control (C) at the wireless
TV link (A or B).
3. Select the video source.
4. Operate the video source as usual. Enjoy!
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Tip
No image or wrong image on TV1
•
•
•
•
•
•
Make sure video sources are connected to the transmitter (A).
Make sure the transmitter (A) is connected to TV1.
Make sure SCART cables are firmly inserted.
Make sure the video source is switched on.
Make sure the correct SCART input on TV1 is selected.
Select the correct video source with TV1 source.
> See the user manual (H) page 8.
No image or wrong image on TV2
•
•
•
•
•
•
•
Make sure SCART cables are firmly inserted.
Make sure the receiver (B) is connected to TV2.
Make sure both receiver (B) and transmitter (A) are switched on.
Make sure the video source is switched on.
Make sure the correct SCART input on TV2 is selected.
Select the correct video source with +/- on the receiver (B).
If the video source gives proper image on TV1:
Make sure the video source gives video signal in CVBS mode.
> See its user manual
•
•
Change the wireless channel that is used for communication.
> See the user manual (H) page 7.
The receiver (B) is out of range of the transmitter (A).
The number of walls and ceilings in between the receiver (B) and
transmitter (A) restrict the distance.
Interference in the image on TV2
•
•
Slightly change the position of the receiver (B) or the transmitter (A).
Change the wireless channel that is used for communication.
> See the user manual (H) page 7.
•
The receiver (B) is out of range of the transmitter (A).
The number of walls and ceilings in between the receiver (B) and
transmitter (A) restrict the distance.
The video sources do not respond
to the remote control commands
from TV2
•
•
•
Point the remote control directly to the receiver (B).
Replace the batteries of the remote controls with new ones.
Install the remote control blaster cord (G).
> See the user manual (H) page 6.
•
•
•
The maximum operating distance of the remote control is 5 m.
The image of the video source
disappears on TV2
Turn off the auto standby mode of the video source.
> See its user manual.
Follow the instructions to reconnect the videosources.
> See this quick start guide (F).
Download from Www.Somanuals.com. All Manuals Search And Download.
Need help?
User manual
See the user manual that came with your wireless TV link.
Helpline
België/Belgique/Belgien 070 222 303 (€ 0.17)
Danmark
Deutschland
España
3525 8759
0900 1101211 (€ 0.12)
902 888 784 (€ 0.15)
08 9165 0005 (€ 0.23)
0 0800 3122 1280
01 764 0292
France
Ireland
Italia
899 23 45 06 (€ 0.25)
Luxemburg/Luxembourg 40 6661 6544
Nederland
Norge
Österreich
Portugal
0900 8407 (€ 0.20)
2270 8111
0900 060 827 (€ 0.20)
2 1359 1442
Schweiz/Suisse/Svizzera 0900 001 600
Suomi
Sverige
0600 412 001
08 5792 9100
UK (United Kingdom)
0906 1010 016 (£ 0.15)
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2005 © Koninklijke Philips Electronics N.V.All rights reserved.
QSG-SLV5400-AEN-V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|