Register your product and get support at
Micro System
MCM280D/12
EN User manual
FR Mode d’emploi
IT Manuale utente
NL Gebruiksaanwijzing
SV Användarhandbok
DA Brugervejledning
DE Benutzerhandbuch
ES Användarhandbok
Download from Www.Somanuals.com. All Manuals Search And Download.
k Only use attachments/accessories
1 Important
specified by the manufacturer.
l Use only with the cart, stand, tripod,
bracket, or table specified by the
Safety
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
m Unplug this apparatus during lightning storms
or when unused for long periods of time.
manufacturer’s instructions.
n Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
i For countries with a polarized mains,
do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong is provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
Caution: To prevent electric shock, match
the wide blade of the plug to the wide
slot, fully insert.
o Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the apparatus:
•
•
•
•
Install all batteries correctly, + and -
as marked on the apparatus.
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Remove batteries when the unit is
not used for a long time.
The batteries shall not be exposed
to excessive heat such as sunshine,
fire or the like.
p Apparatus shall not be exposed to
dripping or splashing.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
q Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
r This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
To establish a safe volume level:
•
•
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
•
Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
Warning
•
Be sure to use your equipment
reasonably and take appropriate breaks.
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
Be sure to observe the following guidelines
when using your headphones.
• Keep this apparatus away from direct sunlight, naked
•
•
•
•
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as
your hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
flames or heat.
• Never look into the laser beam inside this apparatus.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus
from the power.
•
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Hearing safety
Listen at a moderate volume.
•
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
•
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
When you see the crossed-out
wheel bin symbol attached to a
Notice
product, it means the product
is covered by the European
Directive 2002/96/EC:
Never dispose of your product
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
with other household waste.
Please inform yourself about the local rules
on the separate collection of electrical and
electronic products. The correct disposal of
your old product helps prevent potentially
negative consequences on the environment and
human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Recording and playback of material might
require consent. See Copyright Act 1956 and
The Performer’s Protection Acts 1958 to
1972.
When you see the crossed-
out wheel bin symbol with the
chemical symbol ‘Pb’, it means
that the batteries comply with
the requirement set by the
Pb
directive for lead:
This apparatus includes this label:
Please inform yourself about the
local rules on separate collection of batteries.
The correct disposal of batteries helps prevent
potentially negative consequences on the
environment and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
paper pulp (buffer) and polyethylene (bags,
protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
This product complies with the
radio interference requirements
of the European Community.
This product complies with the
requirements of the following directives and
guidelines: 2004/108/EC + 2006/95/EC
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Recycling
Your product is designed and
manufactured with high quality
materials and components,
which can be recycled and
reused.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in the box
2 Your Micro
System
Check and identify the contents of your
package:
•
•
•
•
•
•
•
•
Main unit
Power adapter
Loudspeaker boxes x 2
Remote control
Dock for iPod/iPhone (with dock cable)
Base
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
User manul
Quick start guide
Introduction
With this apparatus, you can:
•
enjoy music from audio discs,iPod,
iPhone, and other external devices
listen to radio stations
record audio from discs to a USB
storage device.
Norge
Typeskilt finnes på apparatens underside.
•
•
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er
derfor ikke frakoplet nettet så lenge
apparatet er tilsluttet nettkontakten.
The apparatus offers you multiple sound effect
settings that enrich sound with Digital Sound
Control (DSC) and Dynamic Bass Boost (DBB).
The apparatus supports the following media
formats:
For å redusere faren for brann eller
elektrisk støt, skal apparatet ikke utsettes
for regn eller fuktighet.
Note
• The type plate is located on the back of the apparatus.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
p
h
a
q
b
c
i
j
d
e
k
l
m
f
g
n
o
e ECO POWER/STANDBY-ON
Turn on the apparatus, switch
a Remote control sensor
•
b
to standby mode, or Eco Power
standby mode.
•
•
•
Stop play.
Stop recording.
Erase a program.
f OPEN/CLOSE
Open or close the disc
compartment.
•
c OK
•
Confirm a selection.
g SOURCE
d MENU
Select the iPhone/iPod menu.
•
Select a source.
•
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
h Display panel
Overview of the remote
control
•
Display current status.
i ALBUM /PRESET+/-
•
•
•
Skip to the previous/next album.
Select a preset radio station.
Navigate in the iPod/iPhone menu.
a
b
j
l
m
•
USB socket.
KRQH
c
ꢀ ,1.
k REC
d
e
.
n
o
•
Record audio files from a disc to a
USB storage device.
f
g
h
p
q
l VOLUME+/-
•
•
Adjust volume.
Adjust time.
m DSC
r
•
Select a preset sound setting.
Start or pause play.
s
t
n
•
i
j
u
o
/
•
•
•
Skip to the previous/next track.
Search within a track.
Tune to a radio station.
v
w
x
+
))
p
y
z
{
•
Connect headphone.
ꢁ
:
k
a
•
Switch to standby mode, or Eco
Power standby mode.
b USB
•
Select USB device source.
Select disc source.
c CD
•
d MP3 LINK
Select external audio device source.
•
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
e DISPLAY/CLOCK
•
Start or pause play.
•
•
•
Select display information during play.
Set the clock.
View the clock.
u VOL +/-
•
•
Adjust volume.
Adjust time.
f MENU
v
•
Select the iPhone/iPod menu.
•
•
Stop play.
Erase a program.
g
/
•
•
Tune to a radio station.
Search within a track.
h USB REC
x SHUFFLE
•
Start record.
•
Select shuffle play modes.
•
Select a record mode.
y PROG
i
/
•
Program tracks.
•
•
Skip to the previous/next track.
Select a preset radio station.
•
Program radio stations.
z RDS/NEWS
j Numeric keypad 0-9
•
For selected FM radio stations:
•
Select a preset radio station.
display RDS information.
•
Select a track from a disc directly.
{ DBB
k DSC
•
Turn on or off dynamic bass
•
Select a preset sound setting.
enhancement.
l TUNER
•
Select tuner source.
m iPhone/iPod
•
Select iPhone or iPod source.
n SLEEP
•
Set the sleep timer.
o TIMER
•
Set the alarm timer.
•
Activate or deactivate timer.
p MUTE
•
Mute or restore volume.
q
•
•
Navigate in the iPod/iPhone menu.
Skip to the previous/next album.
r OK
•
Confirm a selection.
s USB DEL
Delete files in a USB storage device.
•
t
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect FM antenna
3 Get started
1 Connect the supplied FM antenna to the
FM AERIAL socket on the back of the
main unit.
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Mount the stand
L
R
Note
• Ensure that the colors of the speaker wires and
terminals are matched.
1 Lay down the main unit and then slide the
base in the slot until it is fixed.
1 Hold down the socket flap.
2 Insert the stripped part of the wire
completely.
•
Insert the right speaker wires to
“RIGHT”, left speaker wires to
“LEFT”.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Insert the red/blue wires to “+”,
black wires to “-”.
3 Release the socket flap.
Connect power
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the apparatus.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before connecting the AC power cord, ensure you
have completed all other connections.
Note
1 Connect the power adapter to
• Before pressing any function button on the remote
control, first select the correct source with the remote
control instead of the main unit.
•
the DC IN jack on the rear of the
main unit
•
the power socket.
• If you are not going to use the remote control for a
long time, remove the battery.
Prepare the remote control
Set clock
Caution
1 In standby mode, press DISPLAY/
CLOCK to activate the clock setting
mode.
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
For first-time use:
» The hour digits are displayed and begin
to blink.
1 Remove the protective tab to activate the
remote control battery.
2 Press repeatedly to select 12 hour or
To replace the remote control battery:
24 hour format.
1 Open the battery compartment.
3 Press VOL +/- to set the hour.
4 Press DISPLAY/CLOCK to confirm.
» The minute digits are displayed and
begin to blink.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
5 Press VOL +/- to set the minute.
6 Press DISPLAY/CLOCK to confirm.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn on
1 Press STANDBY-ON on the main unit.
» The apparatus switches to the last
selected source.
Switch to standby
1 Press to switch the apparatus to
standby mode.
» The backlight on the display panel is
reduced.
» The clock (if set) appears on the
display panel.
To switch the apparatus to Eco Power
Standby mode:
1 In standby mode, press and hold for
more than 2 seconds.
» The backlight on the display panel
turns off.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Play
Delete files in the USB device
1 Press / to select a track.
Play disc
2 Press USB DEL.
» A confirmation message is displayed.
1 Press CD to select the disc source.
3 Press USB DEL again to confirm.
2 Press to open the disc tray.
•
To cancel, press .
3 Insert a disc with the printed side facing
» After you delete the file, the USB play
up, then close the disc tray.
stops.
» Play starts automatically.
•
•
•
To pause/resume play, press
To stop play, press .
.
Listen to an external device
For MP3/WMA files: to select an
album, press
.
You can also listen to an external audio device
through this unit.
For an audio device with a headphone socket:
•
•
To skip to a track, press / .
To search within a track, press and
hold / . Release to resume
normal play.
1 Press MP3 LINK to select the MP3 link
source.
2 Connect the supplied MP3 link cable to
•
•
the MP3 LINK socket on this unit.
the headphone socket on an MP3
player.
Play from USB
Note
3 Start to play the MP3 player. (See the
user manual of the MP3 player)
• Ensure that the USB device contains playable audio
content.
1 Flip open the USB socket cover on the
front panel.
2 Insert the USB plug of a USB device into
the socket.
3 Press USB to select the USB source.
» Play starts automatically.
•
•
•
To pause/resume play, press
To stop play, press .
.
For MP3/WMA files: to select an
album, press
.
•
•
To skip to a track, press / .
To search within a track, press and
hold / . Release to resume
normal play.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Display play information
5 Play options
1 During play, press DISPLAY/CLOCK
repeatedly to select different play
information.
Repeat and random play
1 Press REPEAT or SHUFFLE repeatedly to
select:
•
•
•
•
[REP] (repeat): the current track is
played repeatedly.
[REP ALL] (repeat all): all tracks are
played repeatedly.
[SHUF] (shuffle): all tracks are played
randomly.
[SHUF REP ALL] (repeat all
randomly): all tracks are played
repeatedly in random order.
2 To return to normal play, press REPEAT
or SHUFFLE repeatedly until play mode is
no longer displayed.
Program tracks
You can program a maximum of 20 tracks.
1 In CD/USB mode, at the stop position,
press PROG to activate the program
mode.
» [PROG] (program) blinks on the
display.
2 For MP3/WMA tracks, press
to select
an album.
3 Press / to select a track number, then
press PROG to confirm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press
to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
•
•
To erase the program, in the stop
position, press
To review the program, in the stop
position, press and hold PROG for
more than 2 seconds.
.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Record
You can record the audio files on a disc into a
USB device.Audio CD tracks and MP3 files are
recorded in .mp3 format, and WMA files are
recorded in .wma format.
The first time you record to USB, a folder
called ‘PHILIPS’ is automatically created in the
USB device. Each time you record to USB, the
recorded files are stored in a sub-folder in the
‘PHILIPS’ folder. Files and sub-folders are named
numerically in the order in which they are
created.
1 Press CD to select the disc source.
2 Load a disc.
•
To select a track from which a
recording starts, press the numeric
buttons.
3 Plug a USB storage device into
socket
of this apparatus.
4 Press USB REC repeatedly to select:
•
[RIP ONE] (record one): record the
selected track.
•
[RIP ALL] (record all): record all
tracks from the selected one.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
•
To stop recording, press .
Note
• When space is not enough, [USB FULL] (memory full)
is displayed.
• If a recorded track lasts less than 10 seconds, it is not
saved in the USB storage device.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Turn the screw to loosen the support
7 Play iPod/iPhone
plate.
You can enjoy audio from iPod/iPhone through
this apparatus.
Compatible iPod/iPhone
Compatible Apple iPod and iPhone models with
a 30-pin dock connector include:
•
iPod classic, iPod touch, iPod nano, iPod
5th generation (video), iPod mini.
iPhone, iPhone 3G.
•
Load the iPod/iPhone
1 Connect the dock to the apparatus.
3 Place the iPod/iPhone in the dock.
4 Turn the screw to fix the iPod/iPhone
securely.
» When the apparatus is connected to
power, the docked iPod/iPhone begins
to charge.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Listen to the iPod/iPhone
1 Ensure that the iPod/iPhone is loaded
correctly.
2 Press iPhone/iPod to select iPod/iPhone
source.
» The connected iPod/iPhone plays
automatically.
•
•
•
To pause/resume play, press
To skip to a track, press / .
To search during play: press and hold
/ , then release to resume normal
play.
.
•
To navigate the menu: press MENU,
press
to select, then press OK to
confirm.
Charge the iPod/iPhone
When the apparatus is connected to power, the
docked iPod/iPhone begins to charge.
Remove the iPod/iPhone
1 Pull the iPod/iPhone out of the dock.
Tip
• If it is hard to pull out the iPod or iPhone, turn the
screw clockwise to loosen the support.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Listen to the
radio
Program radio stations
manually
Note
Tune to a radio station
• You can program a maximum of 40 FM radio stations.
Note
1 Tune to a radio station.
2 Press PROG to activate program mode.
» [PROG] (program) blinks on the
display.
• For optimal reception, fully extend and adjust the
position of the FM antenna.
1 Press TUNER to select the tuner source.
3 Press
to allocate a number (1 to 40)
to this radio station, then press PROG to
confirm.
2 Press and hold
/
for more than 2
seconds.
» [SEARCH] (search) is displayed.
» The preset number and the frequency
of the preset station are displayed.
» The radio tunes to a station with
strong reception automatically.
4 Repeat the above steps to program other
stations.
3 Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
Note
/
repeatedly until you find optimal
reception.
• To overwrite a programmed station, store another
station in its place.
Program radio stations
automatically
Select a preset radio station
Note
1 In tuner mode, press
to select a
preset number.
• You can program a maximum of 40 FM radio stations.
1 In tuner mode, press and hold PROG
for more than 2 seconds to activate
automatic program mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
1 Tune to a RDS station.
2 Press RDS/NEWS repeatedly to scroll
through the following information (if
available):
» Station name
» Program type such as [NEWS] (news(,
[SPORT] (sport), [POP M] (pop
music)...
» Frequency
Set RDS clock
You can use time signal broadcast together with
the RDS signal to set the clock of the apparatus
automatically.
1 Tune to a RDS radio station that
transmits time signals.
2 Press and hold RDS/NEWS for more
than 2 seconds.
Note
• The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Adjust sound
Adjust volume level
1 During play, press VOL +/- to increase/
decrease the volume level.
Select a preset sound effect
1 During play, press DSC repeatedly to
select:
•
•
•
•
•
[POP] (pop)
[JAZZ] (jazz)
[CLASSIC] (classic)
[ROCK] (rock)
[FLAT] (flat)
Enhance bass
1 During play, press DBB to turn on or off
dynamic bass enhancement.
» If DBB is activated, DBB is displayed.
Mute sound
1 During play, press MUTE to mute/unmute
sound.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Press TIMER to confirm.
10 Use more of
your Micro
System
» The timer is set and activated.
Activate and deactivate the alarm
timer
1 Press TIMER repeatedly to activate or
deactivate the timer.
Set the sleep timer
» If the timer is activated, the display
shows .
This unit can switch to standby automatically
after a preset period of time.
» If the timer is deactivated,
disappears on the display.
1 When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
Note
» When sleep timer is activated, the
display shows .
• If disc/USB device source is selected and the track
cannot be played, tuner is activated automatically.
To deactivate sleep timer
1 Press SLEEP repeatedly until “SLP OFF” is
displayed.
» When sleep timer is deactivated,
disappears on the display.
Listen through headphone
1 Plug a headphone into the socket on
the unit.
Set the alarm timer
This unit can be used as an alarm clock.The
DISC,TUNER or USB is activated to play at a
preset time.
1 Ensure that you have set the clock
correctly.
2 In standby mode, press and hold TIMER
for more than 2 seconds.
3 Press CD, TUNER, USB, iPhone/iPod to
select a source.
4 Press TIMER to confirm.
» The hour digits are displayed and begin
to blink.
5 Press VOL +/- to set the hour.
6 Press TIMER to confirm.
» The minute digits are displayed and
begin to blink.
7 Press VOL +/- to set the minute.
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakers
11 Product
information
Speaker Impedance
6ohm
General information-Specs
Note
Power adapter
Model:
PAT065A19EU
Input: AC100-
240V~, 50/60Hz,
1.5A Output:
DC19V, 3.4A
• Product information is subject to change without prior
notice.
Operation Power
Consumption
Specifications
26 W
<2 W
<1 W
Standby Power
Consumption
Amplifier
Rated Output Power 2X30W RMS
Frequency Response 60 - 16kHz, 3dB
Signal to Noise Ratio >62dB
Eco Standby Power
Consumption
Dimensions
- Main Unit (W x H x D) 211 x 250 x
160mm
- Speaker Box
(W x H x D)
158 x 250 x
193mm
Disc
Laser Type
Semiconductor
12cm/8cm
Weight
Disc Diameter
Support Disc
- With Packing
- Main Unit
- Speaker Box
5.85 kg
1.29 kg
2.39 kg
CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
Audio DAC
24Bits / 44.1kHz
Total Harmonic
Distortion
Supported MP3 disc formats
<1%
Frequency Response 60Hz -16kHz
•
•
ISO9660, Joliet
Maximum title number: 512 (depending
on file name length)
S/N Ratio
>62dBA
•
•
Maximum album number: 255
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32~256 (kbps),
variable bit rates
Tuner
Tuning Range
Tuning grid
FM: 87.5 - 108MHz
•
50 kHz (FM)
Total Harmonic
Distortion
<3%
Signal to Noise Ratio
>50 dB
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
USB playability information
Maintenance
Compatible USB devices:
Clean the cabinet
•
•
•
USB flash memory (USB 2.0 or
USB1.1)
USB flash players (USB 2.0 or
USB1.1)
memory cards (requires an additional
card reader to work with this
apparatus)
•
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
Clean discs
•
When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
Supported formats:
•
•
USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
•
•
WMA v9 or earlier
Directory nesting up to a maximum
of 8 levels
•
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
•
•
Number of albums/ folders:
maximum 99
Number of tracks/titles: maximum
999
ID3 tag v2.0 or later
File name in Unicode UTF8
(maximum length: 128 bytes)
Clean the disc lens
•
•
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
Unsupported formats:
•
•
Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and is not be shown in
the display.
Unsupported file formats are
skipped. For example, Word
documents (.doc) or MP3 files with
extension .dlf are ignored and not
played.
•
•
AAC, WAV, PCM audio files
DRM protected WMA files (.wav,
.m4a, .m4p, .mp4, .aac)
•
WMA files in Lossless format
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Insert the battery with its polarities (+/–
signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
12 Troubleshooting
•
•
Caution
USB device not supported
•
• Never remove the casing of this apparatus.
The USB device is incompatible with the
apparatus. Try another one.
No disc detected
To keep the warranty valid, never try to repair
the system yourself.
•
•
•
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/support).When you contact Philips,
ensure that your apparatus is nearby and the
model number and serial number are available.
No power
•
•
Replace or clean the disc.
Use a finalized CD or correct format disc.
Poor radio reception
•
Increase the distance between the unit
and your TV or VCR.
•
•
Fully extend the FM antenna.
Connect an outdoor FM antenna instead.
•
•
•
Ensure that the AC power plug of the
unit is connected properly.
Ensure that there is power at the AC
outlet.
To save power, the system switches
off automatically 15 minutes after track
play reaches the end and no control is
operated.
Timer does not work
•
•
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the power
plug has been disconnected.
Reset the clock/timer.
•
No sound or poor sound
•
•
Adjust the volume.
Check that the speakers are connected
correctly.
•
Check if the stripped speaker wires are
clamped.
Left and right sound outputs reversed
Check the speaker connections and location.
No response from the unit
•
Disconnect and reconnect the AC power
plug, then turn on the system again.
As a power-saving feature, the unit
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
•
Remote control does not work
•
Before you press any function button,
first select the correct source with the
remote control instead of the main unit.
Reduce the distance between the remote
control and the unit.
•
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number:
Download from Www.Somanuals.com. All Manuals Search And Download.
|