FFWW--V795
VCD MP3-CD
Mini Hi-Fi System
3139 115 21281
pg 001-035/V795/21-Eng
1
4/16/02, 6:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
6
3
DISC DIRECT PLAY
DISC
5
4
DISC
OPEN•
CLOSE
DISC
1
2
DISC
3
CHANGE
7
8
-
-
CD/CD R /CD RW COMPATIBLE
3VCD
C
H
A
N
G
E
R
CD SYNCHRO RECORDING
VCD MINI HIFI SYSTEM
FW-
VOLUME
3
STANDBY-ON
2
1
§
∞
≤
£
™
¡
)
(
^
9
0
ECO POWER
MUSIC
LEVEL
VOLUME
INTERACTIVE VU METER
G
ATION - JOG
CLOCK• AUTO
PROG
TIMER REPLAY
DISPLAY
DUBBING REC
-
MP3 CD
!
@
CD 1•2•3
BAND
E
VCD
PAL/
TUNER
AUX
NTSC
DEMO
STOP/
CLEAR
PLAY•
PAUSE
SOURCE
ON•OFF
LEVEL
•
DYNAMIC AMPLIFICATION CONTROL
TAPE
#
$
%
^
TAPE 1•2
CDR/DVD
MIC/
LEVEL
TAPE 1
TAPE 2
*
&
3
3139 115 21281
4/16/02, 6:42 PM
pg 001-035/V795/21-Eng
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3139 115 21281
4/16/02, 6:42 PM
pg 001-035/V795/21-Eng
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 6
------------------------------------------------- 36
Bahasa Melayu ----------------------------------- 65
Bahasa Indonesia -------------------------------- 95
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
5
3139 115 21281
pg 001-035/V795/21-Eng
5
4/16/02, 6:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Radio Reception
Environmental Information ................................ 7
Supplied Accessories ........................................... 7
Acknowledgement ............................................... 7
Safety Information ................................................ 7
Storing Preset Radio Stations ................... 25–26
Tuning to Preset Radio Stations ...................... 26
Erasing a Preset Radio Station ........................ 26
ChangingTuning Grid ........................................ 26
Preparations
Tape Operation/Recording
Rear Connections ..........................................8–10
Inserting batteries into the remote
control .................................................................. 10
Tape Playback ...................................................... 27
General Information on Recording ................ 28
Preparation for Recording ............................... 28
OneTouch Recording/Recording the
mixed sound ........................................................ 28
CD/VCD/MP3-CD Synchro Recording..............
......................................................................... 28–29
DubbingTapes ..................................................... 29
Controls
Controls on the system and remote
control ........................................................... 11–13
Basic Functions
Karaoke
Plug and Play ........................................................ 14
Demonstration mode........................................ 15
Switching the system on ................................... 15
Switching the system to Standby mode ........ 15
Switching the system to Eco Power Standby
mode ..................................................................... 15
Power Saving Automatic Standby.................... 15
Display mode....................................................... 16
Volume Control .................................................. 16
Sound Navigation ........................................ 16–17
Microphone Mixing ............................................ 29
Clock/Timer
View Clock .......................................................... 30
Clock Setting ....................................................... 30
Timer Setting................................................ 30–31
External Sources
Listening to External Sources .......................... 32
CD/VCD/MP3-CD Operations
Discs for Playback .............................................. 18
Loading Discs ...................................................... 19
Disc Playback....................................................... 19
Replace discs during playback.......................... 19
Select a desired track/passage ......................... 20
Programming the disc tracks .................... 20–21
Repeat ................................................................... 21
Title/Album Name ............................................. 21
Maintenance.............................................. 32
Specifications ........................................... 33
Troubleshooting ............................. 34–35
VIDEO CD
Adjusting theTV System................................... 22
OSD – On Screen Display ............................... 22
Playing aVideo CD with PBC ................... 22–23
Return ................................................................... 23
Digest .................................................................... 23
A-B Repeat .......................................................... 23
Zoom .................................................................... 23
Resume ................................................................. 24
Slow ....................................................................... 24
Vocal ...................................................................... 24
Key Control ......................................................... 24
Echo....................................................................... 24
6
3139 115 21281
pg 001-035/V795/21-Eng
6
4/16/02, 6:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
IMPORTANT!
Safety Information
PLEASE NOTETHATTHE VOLTAGE
SELECTOR LOCATED ATTHE REAR OF
THIS SYSTEM IS PRESET AT 220V FROM
THE FACTORY. FOR COUNTRIESTHAT
OPERATE AT 110V-127V, PLEASE ADJUST
TO 110V-127V BEFOREYOU SWITCH ON
THE SYSTEM.
G Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
G Place the system on a flat, hard and stable
surface.
Environmental Information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
G Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
G Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
G If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
G The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Acknowledgement
Energy Star
As an ENERGY STAR
R
Partner, Philips has
determined that this product
meets the ENERGY STAR guidelines for energy
efficiency.
G When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
R
Supplied accessories
– Remote control
– Batteries (two AA size) for remote control
– AM loop antenna
– FM wire antenna
– AC power cord
– OneVideo cinch cable
– One cinch cable (GN/BU)
– Power booster amplifier package:
– one power booster amplifier
– one pair of speakers
– AC power cord
7
3139 115 21281
pg 001-035/V795/21-Eng
7
4/16/02, 6:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Television
AM loop
antenna
L
FM wire
antenna
AUDIO
OUT
R
VIDEO
IN
VIDEO OUT
(CVBS)
D
speaker
(right)
E
speaker
(left)
R
L
AUX/
CDR
IN
B
BOOSTER
OUT
AM ANTENNA FM ANTENNA
UBWOOFER
OUT
F
AC
MAINS
+
R
—
—
C
VOLTAGE
SELECTOR
110V-
127V
L
A
220V-
240V
+
SPEAKERS 6Ω
AC power cord
booster
speaker
(right)
booster
speaker
(left)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS NE PAS OUVRIR
RISQUE DE CHOC ELECTRIQUE
POWER SWITCH
BOOSTER IN
R
L
OFF
ON
AC power cord
AC MAINS
SPEAKERS 6Ω
—
+
R
L
R
L
VOLTAGE
SELECTOR
—
+
110V-
127V
220V-
240V
Rear Connections
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
The type plate is located at the rear of the
system.
A Power
Before connecting the AC power cord to the
wall outlet, ensure that the following are done;
– If your system is equipped with a
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
VOLTAGE
SELECTOR
Voltage Selector, set theVOLTAGE
SELECTOR to the local power line
voltage.
110V-
127V
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
220V-
240V
– All other connections have been made.
8
3139 115 21281
pg 001-035/V795/21-Eng
8
4/16/02, 6:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
D Video Out Connection
B Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals.Adjust the
position of the antenna for optimal reception.
Connect the VIDEO OUT (CVBS) terminal
at the rear of the system to theTV orVCR
VIDEO IN for viewing or recording.
Note:
AM Antenna
– To avoid magnetic interference, do not position
the front speakers too close to theTV.
E Connecting other equipment to your
system
Connect the audio left and right OUT terminals
of a TV,VCR, Laser Disc player, DVD player or
CD Recorder to the AUX/CDR IN terminals.
G Position the antenna as far as possible from aTV,
VCR or other radiation source.
Note:
FM Antenna
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX/CDR IN left terminal. Alternatively, you
can use a “single to double” cinch cable (still be
mono sound).
G For better FM stereo
reception, connect an
outdoor FM antenna to the
FM ANTENNA
terminal.
F Power Booster Connection
C Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to "R" and left
speaker to "L", coloured (marked) wire to "+"
and black (unmarked) wire to "-".
VOLUME
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS NE PAS OUVRIR
RISQUE DE CHOC ELECTRIQUE
BOOSTER IN
R
L
POWER SWITCH
7
6
1
2
OFF
ON
5
4
3
SPEAKERS 6Ω
–
+
AC MAINS
R
L
R
L
–
+
VOLTAGE
SELECTOR
110V- 220V-
127V
240V
1
2
G Fully insert the stripped portion of the speaker
wire into the terminal as shown.
1
2
Connect the BOOSTER OUT (Right and
Left) terminals of the mini system to the power
booster amplifier BOOSTER IN (Right and
Left) terminals respectively.
Connect the speaker wires to the BOOSTER
SPEAKERS terminals, right speaker to "R" and left
speaker to "L", coloured (marked) wire to "+"
and black (unmarked) wire to "-".
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
9
3139 115 21281
4/16/02, 6:42 PM
pg 001-035/V795/21-Eng
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
3
Set the VOLTAGE SELECTOR to the local
power line voltage.
4
5
Plug in the AC mains to the wall socket.
Switch on the POWER SWITCH to activate
the power booster amplifier.
6
7
Press STANDBY ON button to switch the
system ON or to Standby mode.
Rotate theVOLUME control to adjust the
loudness of the power booster amplifier.
Inserting batteries into the
Remote Control
Insert two batteries (Type R06 or AA) into the
remote control with the correct polarity as
indicated by the + and - symbols inside the
battery compartment.
CAUTION!
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
10
3139 115 21281
4/16/02, 6:42 PM
pg 001-035/V795/21-Eng
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls (main system’s illustration on page 3)
# INCREDIBLE SURROUND (IS)
Controls on the system and
remote control
–
to activate or deactivate the surround sound
effect.
1 ECO POWER
$ wOOx ON•OFF
–
to switch the system on or to Eco Power
Standby mode.
–
to select enhanced or normal wOOx sound
effect.
2 STANDBY ON y
to switch the system on or to Standby mode.
3 DISPLAY SCREEN
to view the current status of the system.
wOOx LEVEL
to select a desired wOOx level : WOOX 1,
WOOX 2 or WOOX 3.
–
–
–
% MIC/LEVEL
4 DISCTRAYS
5 DISC CHANGE
–
–
to connect microphone jack.
to adjust the mixing level for karaoke or
microphone recording.
–
to change disc(s).
6 DISC 1 / DISC 2 / DISC 3
to select a disc tray for playback.
7 OPEN•CLOSE
to open or close the disc tray.
8 INTERACTIVEVU METER
^ ç
–
& TAPE DECK 2
* TAPE DECK 1
( SOURCE – to select the following:
VCD PAL/NTSC / (CD 1•2•3)
–
–
–
to open the tape deck door.
–
–
to show theVU (volume unit) meter in music or
volume mode depending on the display mode
selected.
to select disc tray 1, 2 or 3 (this system can
playback normal CD/VCD/MP3-CD format
disc).
(on the system only) to select corresponding
video output for NTSC or PAL system of your
TV set (except Multi-systemTV).
TUNER / (BAND)
to select waveband : FM or MW.
TAPE / (TAPE 1• 2)
to select tape deck 1 or 2.
9 VOLUME
–
to increase or decrease the volume.
0 Tape Deck Operation
AUTO REPLAY
–
to select continuous playback in either AUTO
PLAY or ONCE mode only.
DUBBING
–
–
–
–
–
to dub a tape.
REC
to start recording on tape deck 2.
AUX / (CDR/DVD)
to select a connected external source :
CDR/DVD or AUX (auxiliary) mode.
! SOUND NAVIGATION
–
to select the desired sound feature : DSC or
VAC.
@ JOG CONTROL
–
to select the desired sound effect for the
selected sound feature.
DSC ..................DIGITAL, ROCK, POP, NEWAGE,
CLASSIC or ELECTRIC.
VAC ..................HALL, CONCERT, CINEMA,
DISCO, ARCADE or CYBER.
11
3139 115 21281
4/16/02, 6:42 PM
pg 001-035/V795/21-Eng
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
) Mode Selection
PREV / PRESET / NEXT í ë
(TITLE -/+)
PLAY PAUSE ÉÅ
for CD/VCD/MP3-CD…to start or interrupt
playback.
forTAPE.............. to start playback.
for PLUG & PLAY…(on the system only) to
initiate and start plug & play
for MP3-CD only…to select previous/nextTitle.
forVCD only…to move the zoomed picture
down or up.
................................. to select next or previous
MENU orVCD track during
playback (for VCD with PBC
mode.
SEARCH•TUNING à á
(ALBUM -/+)
for MP3-CD only…to select previous/next
Album
forVCD only…to move the zoomed picture to
the left or right.
switched on).
for CD/VCD .... to skip to the previous or next
track.
forTUNER ........ to select a preset radio station.
for CLOCK ....... (on the system only) to set the
minute.
for CD/VCD .... to search backward/forward.
forTUNER ........ to tune to a lower or higher
radio frequency.
¡ n
–
to connect headphones.
™ VCD Operation (for VCD version 2.0 only)
forTAPE.............. to rewind or fast forward.
for CLOCK ....... (on the system only) to set the
hour.
DEMO STOP/CLEAR Ç
for CD/VCD/MP3-CD…to stop playback or to
clear a programme.
PBC (PLAYBACK CONTROL)
to switch on or off PBC mode.
RETURN
to return to the previous MENU level during
playback (forVCD with PBC switched on).
–
–
£ TITLE/ALBUM NAME
forTUNER ........ (on the system only) to stop
programming.
–
to display the title or album name for
MP3-CD.
................................. (on the system only) to delete the
preset radio station.
≤ DISPLAY
to select different screen display mode :
NORMAL, MODE 1, MODE 2, or MODE 3.
∞ PROG
for CD/VCD/MP3-CD… to programme disc
–
forTAPE.............. to stop playback or recording.
................................. to reset tape counter number.
for DEMO ......... (on the system only) to activate/
deactivate the demonstration.
for CLOCK ....... (on the system only) to exit clock
setting or cancel timer.
tracks.
forTUNER ........ to programme preset radio
stations.
for PLUG & PLAY…(on the system only) to exit
plug & play mode.
for CLOCK ....... (on the system only) to select 12-
or 24-hour clock mode.
§ CLOCK•TIMER
–
to view the clock, set the clock or set the timer.
≥ OSD (ON SCREEN DISPLAY)
–
to switch on or off the on screen display on the
TV.
12
3139 115 21281
pg 001-035/V795/21-Eng
12
4/16/02, 6:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
• ZOOM
to enlarge a still picture of theVCD on theTV
screen.
ª RESUME
to continue playback again from where you have
stopped (forVCD with PBC switched off).
º KEY CONTROL ( I È i
to change theVCD key tone level to suit your
vocal range.
–
OSD
°
‡
2
TUNER TAPE 1/2
≥
(
VCD 123
MP3 123
AUX
–
1
4
2
3
6
)
–
5
8
0
9
7
I
........................... to decrease the key tone level.
È.............................. to restore the key tone level to
original setting.
i............................. to increase the key tone level.
PROG
REPEAT
∞
9
fl
9
VOLUME
É
Å
⁄ ECHO -/+
TITLE
_
TITLE
+
í
ë
–
to adjust theVCD echo level for karaoke after
inserted the microphone.
)
Ç
¤ SLOWÖ
à
á
–
to watch theVCD at a slower speed.
ALBUM
ALBUM
+
!
fi
›
‹
_
!
£
™
•
ª
º
DSC
VAC
TITLE/
ALBUM
NAME
‹ VOCAL
–
to fade out the original vocal from a Karaoke
VCD or to switch between mono or stereo
mode during audio disc playback.
PBC RETURN DIGEST
A-B
ZOOM RESUME SLOW VOCAL
Ö
KEY CONTROL
IS
› A - B
to playback a certain scene or passage of a CD/
VCD repeatedly.
fi DIGEST
¤
#
$
–
ECHO
wOOx
-
+
ON/OFF
LEVEL
⁄
–
to scan through aVCD or a specific track.
fl REPEAT
–
to playback track/disc/programme repeatedly.
‡ DIGIT 0 – 9
(numbers consisting more than two figures must be
keyed in within 2 seconds.)
–
to select a track number for CD/VCD/MP3-CD.
° B
–
–
to switch the system to Standby mode.
to switch the system to Eco Power Standby
mode.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (VCD 123 or
TUNER, for example).
– Then select the desired function (É, í,
ë, for example).
13
3139 115 21281
4/16/02, 6:43 PM
pg 001-035/V795/21-Eng
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
OSD
2
VCD MINI HIFI SYSTEM
FW-
VOLUME
VCD 123
AUX
TUNER TAPE 1/2
STANDBY-ON
MP3 123
1
2
3
6
4
5
8
0
7
9
PROG
REPEAT
ECO POWER
ECO POWER
VOLUME
MUSIC
LEVEL
VOLUME
É
Å
INTERACTIVE VU METER
TITLE
_
TITLE
GATION
JOG
-
+
CLOCK• AUTO
í
ë
-
MP3 CD
DISPLAY
PROG
DUBBING REC
TIMER REPLAY
Ç
à
á
CD 1•2•3
BAND
ALBUM
ALBUM
+
E
_
VCD
PAL/
DSC
VAC
TUNER
AUX
TITLE/
ALBUM
NAME
NTSC
DEMO
STOP/
CLEAR
PLAY•
PAUSE
PBC RETURN DIGEST
A-B
SOURCE
ON•OFF
LEVEL
ZOOM RESUME SLOW VOCAL
•
DYNAMIC AMPLIFICATION CONTROL
Ö
TAPE
KEY CONTROL
IS
TAPE 1•2
CDR/DVD
MIC/
ECHO
wOOx
LEVEL
-
+
ON/OFF
LEVEL
IMPORTANT!
To reinstall Plug and Play
Before you operate the system, complete
the preparation procedures.
1
2
In Standby or Demonstration mode, press and
hold PLAYÉÅ on the system until "AUTO
INSTALL- PRESS PLAY" is displayed.
Press PLAYÉÅ again to start installation.
G All previously stored radio stations will be
replaced.
Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
To exit without storing the Plug and Play
G Press Çon the system.
If Plug and Play has not been installed
When you turn on the system, "AUTO
INSTALL- PRESS PLAY" will be displayed.
Press PLAYÉÅ on the system to start
installation.
G "INSTALL" will be displayed and followed by
"TUNER" and then "AUTO".
G PROG will start flashing.
1
2
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If you do not complete Plug and Play installation,
Plug and Play will be reinitiated the next time you
turn on the power.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode automatically.
G The system will search for all radio stations
on the FM band, then the MW band.
G All available radio stations with strong signal
strength will be stored automatically.
G The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
G The last preset radio station will play when
Plug and Play is completed.
14
3139 115 21281
pg 001-035/V795/21-Eng
14
4/16/02, 6:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
Switching the system to Standby
mode
In Demonstration mode
G Press and hold DEMO STOP Ç on the
system.
To activate the demonstration
G In Standby mode, press and hold DEMO
STOPÇon the system until "DEMO ON" is
displayed.
In any other source mode (except Eco
Power Standby mode)
G Press STANDBY ON (or B on the remote
control).
G The demonstration will begin.
To deactivate the demonstration
G Press and hold DEMO STOP Çon the system
until "DEMO OFF" is displayed.
G The clock will appear on the display when the
system is in Standby mode.
G The system will switch to Standby mode.
Note:
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Standby mode.
– Even if you remove the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
Switching the system to Eco
Power Standby mode (< 1Watt)
Switching the system on
In Standby/Demonstration mode
G Press STANDBY ON.
G Press ECO POWER (or press and hold B on
the remote control).
G The system will switch to the last selected
source.
G Press VCD, TUNER, TAPE, AUX (or
VCD 123/MP3 123, TUNER, TAPE 1/2 or
AUX on the remote control).
G The system will switch to the selected source.
G Press any one of the DISC DIRECT PLAY
buttons.
G "ECO POWER" will be displayed, then the
display screen will go blank.
G The low power ECO POWER LED will be
lighted.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power Standby or Standby mode.
G The system will switch to CD mode.
In Eco Power Standby mode
G Press ECO POWER.
G The system will switch to last selected source.
G Press CD 123, TUNER, TAPE 1/2 or
AUX/CDR on the remote control.
Power Saving Automatic Standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.
G The system will switch to the selected source.
15
3139 115 21281
pg 001-035/V795/21-Eng
15
4/16/02, 6:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Sound Navigation
Display mode
There are four different display modes for
selection.
For optimal sound listening, select only one
of the following navigation sound controls
at a time : wOOx, DSC or VAC.
G Press DISPLAY repeatedly to select NORMAL,
MODE 1, MODE 2, or MODE 3.
NORMAL ........All available LEDs will light up
and the display screen will have
full brightness. TheVU meter will
be in music mode.
MODE 1 ..........All available LEDs will light up
and the display screen will have
full brightness. TheVU meter will
be in volume mode.
MODE 2 ..........All available LEDs will light up
and the display screen will be at
half brightness. TheVU meter
will be in music mode.
MODE 3 ..........The display screen will be at half
brightness. TheVU meter and all
LEDs will be off.
wOOx
There are three wOOx settings to enhance the
bass response.
1
Press wOOx ON•OFF to
switch ON (enhanced) or OFF
(normal) the wOOx sound effect.
G When wOOx is switched on;
G WOOX and the last selected
wOOx level will appear on the display.
G When wOOx is switched off;
G The display will show "WOOX NORM" and
WOOX will disappear from the display.
2
When wOOx is switched on, adjust wOOx
LEVEL (or press wOOx LEVEL on the
remote control) to select the desired wOOx
level :WOOX 1,WOOX 2 or WOOX 3.
Volume Control
Note:
Adjust VOLUME to increase (turn knob
clockwise or pressVOLUME +) or decrease
(turn knob anti-clockwise or pressVOLUME -)
the sound level.
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, deactivate wOOx or reduce
the volume.
To listen through the headphones
G Connect the headphones plug to the n socket
at the front of the system.
Automatic DSC-wOOx /VAC-wOOx
selection
The best wOOx setting is generated
automatically for each DSC orVAC selection.
You can manually select the wOOx setting that
best suits your listening environment.
G The speakers will be muted.
16
3139 115 21281
pg 001-035/V795/21-Eng
16
4/16/02, 6:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Incredible Surround
DSC (Digital Sound Control)
The DSC feature enables you to adjust the
system to suit your type of music.
The Incredible Surround magnifies the virtual
distance between the front speakers for an
incredibly wide, enveloping, stereo effect.
1
2
Press DSC.
G DSC button lights up
Adjust the JOG
D
C
G Press INCREDIBLE
SURROUND (or IS on
the remote control)
D
L
N
B
C
CONTROL (or press
DSC on the remote
control repeatedly) to
select the desired Digital
I
repeatedly to activate/
deactivate the surround
sound effect.
Sound Control effect : DIGITAL, ROCK, POP,
NEWAGE, CLASSIC or ELECTRIC.
G The selected DSC will be highlighted.
G If activated,
will appear on the display and the INCREDIBLE
SURROUND button lights up.
G If deactivated,“IS OFF” will be displayed.
Note:
– For a neutral sound effect, select CLASSIC.
VAC (Virtual Ambience Control)
TheVAC feature enables you to adjust the
system to select a type of environment.
1
2
Press VAC.
G VAC button lights up.
Adjust the JOG
CONTROL (or press
VAC on the remote
control repeatedly) to
select the desiredVirtual
Ambience Control effect : HALL, CONCERT,
CINEMA, DISCO,ARCADE or CYBER.
G The selectedVAC will be highlighted.
Note:
– When you selectVAC, Incredible Surround will
switch on automatically.
17
3139 115 21281
4/16/02, 6:43 PM
pg 001-035/V795/21-Eng
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
3
D I S C D I R E C T P L A Y
DISC
OSD
DISC
CHANGE
OPEN•
CLOSE
DISC
1
2
DISC
3
2
VCD 123
MP3 123
1
AUX
TUNER TAPE 1/2
-
-
CD/CD R /CD RW COMPATIBLE
3VCD
C
H
A
N
G
E
R
CD SYNCHRO RECORDING
2
3
6
VCD MINI HIFI SYSTEM
4
5
8
0
FW-
VOLUME
STANDBY-ON
9
7
PROG
REPEAT
VOLUME
É
Å
ECO POWER
ECO POWER
TITLE
_
TITLE
+
í
ë
MUSIC
LEVEL
VOLUME
INTERACTIVE VU METER
G
ATION JOG
-
CLOCK• AUTO
-
MP3 CD
Ç
DISPLAY
PROG
DUBBING REC
TIMER REPLAY
à
á
ALBUM
ALBUM
+
CD 1•2•3
BAND
_
E
VCD
PAL/
DSC
VAC
TITLE/
ALBUM
NAME
TUNER
AUX
NTSC
DEMO
PLAY•
PAUSE
STOP/
CLEAR
PBC RETURN DIGEST
A-B
SOURCE
ON•OFF
LEVEL
•
DYNAMIC AMPLIFICATION CONTROL
ZOOM RESUME SLOW VOCAL
TAPE
Ö
KEY CONTROL
TAPE 1•2
CDR/DVD
MIC/
LEVEL
IS
ECHO
wOOx
IMPORTANT!
Support following MP3-CD formats
(IS09660 format):
– This system is designed for regular discs.
Therefore, do not use any accessories such
as disc stabiliser rings or disc treatment
sheets, etc., as offered on the market,
because they may jam the disc mechanism.
– Do not load more than one disc into the
tray.
G Max.Title/Album name - 30 characters
G Max.Title number plus Album is 255
G Max. nested directory is 8 levels
G The max.Album number is 32
G The max. MP3 programme track number is 99
G SupportedVBR bit-rate
G Supported sampling frequencies for MP3 disc :
32 kHz, 44.1 kHz, 48 kHz
G Supported Bit-rates of MP3 disc are: 32, 64, 96,
128, 192, 256 (kbps)
Before viewing the Video CD, ensure that
the set is switched to corresponding PAL or
NTSC system of yourTV set (exception
Multi-systemTV).
Following formats can’t be supported
Discs for Playback
G The files like *.WMA, *AAC, *.DLF, *.M3U, *.PLS
G Non English Album/Title name
G The discs recorded under UDF format
This system can playback all digital audio CD,
video CD, MP3-CD format discs, finalised digital
audio CD-Recordable (CDR) discs and finalised
digital audio CD-Rewritable (CDRW)discs.
Note:
– For mixed mode discs, only one mode will be
selected for playback depending on the recording
format.
18
3139 115 21281
pg 001-035/V795/21-Eng
18
4/16/02, 6:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
Loading Discs
Disc Playback
1
2
3
Press VCD to select CD/VCD/MP3-CD mode.
Press OPEN•CLOSE to open the disc tray.
Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
G The disc tray will rotate until the empty tray
is ready for loading.
a disc is loaded in the disc tray
the current selected disc tray is empty
the current selected disc tray is loaded
or playing
To play all discs on the disc tray
G Press PLAYÉÅ.
G All the available discs will play once, then stop.
G During playback, the selected disc tray, track
number and elapsed playing time of the current
track will appear on the display.
DISC CHANGE
OPE
DISC
1
DISC
2
DISC
3
1
1
F
E
To start playback from a selected disc
tray
G Press DISC 1, DISC 2 or DISC 3.
4
Press OPEN•CLOSE to close the disc tray.
G "READING DISC" will be displayed. The
selected disc, total number of tracks and the
playing time will appear on the display.
G A lighted button indicates that a disc is loaded
on the disc tray.
To interrupt playback
G Press PAUSEÉÅ.
G To resume playback, press PLAYÉÅ again.
To stop playback
G Press Ç.
For MP3-CD only
G Load a MP-3 CD format music disc on the disc
tray.
Replace discs during playback
G The first album number and first title number
"A01 T001" will be displayed.
1
2
Press DISC CHANGE.
G "OPEN" will be displayed.
To change the inner disc, press DISC
CHANGE again.
Notes:
– Load the discs with the label side facing up.
– To ensure good system performance, wait until
the disc tray completely reads the disc(s) before
proceeding.
G The active disc will stop playing and the disc
tray will close to retrieve the inner disc, then
reopen with the inner disc accessible.
– For MP3-CD, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
19
3139 115 21281
4/16/02, 6:43 PM
pg 001-035/V795/21-Eng
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
Note:
Select a desired track/passage
– "A" represents ALBUM and "T" represents
TRACK, "XX" or "XXX" is the current selected
Album orTrack number.
To search for a particular passage during
playback
G Press à or á to select 4 different search
speed.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
G "FRX1"; "FRX2"; "FRX3" or "FRX4" will be
displayed on theTV screen when you select a
fast rewind search.
G "FFX1"; "FFX2"; "FFX3" or "FFX4" will be
displayed on theTV screen when you select a
fast forward search.
G Normal playback will begin at the end of the
fast rewinding or forwarding of the selected
track.
1
2
Load the desired discs on the disc tray (refer to
“Loading Discs”).
Press the VCD (CD 1•2•3) button to select the
disc tray.
G Programming can only be done on the
selected disc.
Press PROG to start programming.
G PROG will start flashing.
G Play returns to normal when PLAYÉÅ is
pressed or when a new track is selected.
3
To select a desired track
G Press í or ë repeatedly (or Digits 0–9 on
the remote control) until the desired track
appears on the display.
G If playback is stopped, press PLAYÉÅ to start
playback.
G It will cancel any previously programmed
tracks and selected repeat mode.
Press í or ë repeatedly (or Digits 0–9 on
the remote control) to select the desired track.
For MP3-CD, press ALBUM -/+ and TITLE
-/+ to select the desired Album andTitle for
programming.
4
¶
Note:
5
¶
6
Press PROG to store the track.
– Maximum track selection from digital keys on
the remote control is 199 for MP3-CD and 99 for
VCD/CD.
Repeat steps 3–5 to store other tracks.
Press PLAYÉÅ to start programme playback.
G "PLAY PROGRAM" will be displayed.
G To end programming without starting playback,
press Ç once .
For MP3-CD only
To select a desired Album
G The total number of tracks programmed and
the total playing time will appear on the display.
G Press ALBUM -/+ (à or á) repeatedly
until the desired Album appears on the display.
G ALB will start flashing.
Notes:
– Programme cannot be used forVCDs when PBC
is switched on. Switch off PBC before storing tracks.
– For MP3-CD, total playing time will not be
shown.
G “AXX T001” will be displayed after the
album name scrolled through the display briefly.
To select a desiredTitle
– If the total playing time is more than "99:59",
then "--:--" will appear on the display instead
of the total playing time.
– If you attempt to programme more than 99
tracks, "PROGRAM FULL" will be displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.
G Press TITLE -/+ (í or ë) repeatedly until
the desiredTitle appears on the display.
G Use the digital keys on the remote control to
select the track under current Album directly.
G TITLE will start flashing.
G “A01 TXXX” will be displayed after the title
name scrolled through the display briefly.
20
3139 115 21281
pg 001-035/V795/21-Eng
20
4/16/02, 6:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
To review the programme
G Stop playback and press í or ë repeatedly.
G To exit review mode, press Ç.
Title/Album Name
This feature use to display the title and album
name for MP3-CD.
G Press TITLE/ALBUM NAME repeatedly to
display the title or album name.
G TITLE will start flashing if title name is
displayed.
To erase the entire programme
G Press Ç once when playback is stopped or
twice during playback.
G "PROGRAM CLEARED" will be displayed.
G PROG will disappear from the display.
G ALB will start flashing if album name is
displayed.
Note:
– The programme will be erased if you change
source, select another disc tray or disconnected the
system from the power supply.
For Recording, please refer to “Tape
Operation/Recording”.
Repeat
You can play the current track/disc/programme
repeatedly during playback.
1
Press REPEAT on the remote control
repeatedly to select various repeat modes.
G In normal playback
G "REPEAT TRACK" – to repeat the current
track.
"REPEAT DISC" – to repeat the entire disc.
G RPT
appears on the display.
G In programme playback
G "REPEAT TRACK" – to repeat the current
programmed track.
"REPEAT PROGRAM" – to repeat all
programmed tracks.
G RPT
and PROG will appear on the display.
G The current track/disc/programme will now be
played repeatedly until you press Ç.
2
To resume normal playback, press REPEAT
until the "REPEAT OFF" mode is displayed.
G RPT
will disappear from the display.
21
3139 115 21281
4/16/02, 6:43 PM
pg 001-035/V795/21-Eng
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
VIDEO CD
OSD – On Screen Display
If you insertVCD, yourTV screen will serve as an
additional display for messages (e.g. PLAY, STOP),
and information stored on theVCD.
OSD
G Press OSD on the remote control repeatedly to
2
TUNER TAPE 1/2
switch on or off the On Screen Display.
VCD 123
MP3 123
1
AUX
When OSD is switched ON; you can see the
following display on theTV screen.
2
3
6
Below is an example of the OSD message.
4
5
8
0
SINGLE ELAPSED
9
7
PLAY XX/TT
MM:SS
PROG
REPEAT
VOLUME
– "XX" is the current track.
– "TT" is the total tracks.
– "MM" is in minutes.
– "SS" is in seconds.
É
Å
TITLE
_
TITLE
+
í
ë
Ç
Note:
à
á
– You can also view the information from a
MP3-CD or normal CD.
ALBUM
ALBUM
+
_
DSC
VAC
TITLE/
ALBUM
NAME
PBC RETURN DIGEST
A-B
Playing aVideo CD with PBC
VCD with PBC (Playback Control) will be
indicated on the display of the set as soon as
they are inserted. PBC is a predefined play
sequence stored on theVCD.
ZOOM RESUME SLOW VOCAL
Ö
KEY CONTROL
IS
ECHO
wOOx
-
+
ON/OFF
LEVEL
1
2
Switch on theTV, insert aVCD with PBC and
press PLAYÉÅ to start playback.
MENU appears on theTV screen.
Adjusting theTV System
Before viewing theVideo CD, ensure that the set
is switched to corresponding PAL or NTSC
system of yourTV set (except Multi–systemTV).
If the menu consists of a list of titles, you
can select a sequence directly
G Press Digits 0–9 on the remote control to
select your choice.
G Press and hold PAL/NTSC for
CD 1•2•3
more than 2 seconds to
switch between PAL or NTSC
G TheVCD starts playing of the selected
sequence automatically.
VCD
PAL/
TUN
NTSC
TV system.
G AfterTV system is selected,
the set will automatically switch
to the lastTV system setting every time theVCD
source is selected.
Note:
– If a menu consists of more than one page, press
¡ / ™ to go through the pages.
Switching off PBC
G In stop mode, press PBC.
G “PBC OFF” will be displayed.
Note:
– Before adjusting theTV system, make sure that
there is no MP3-CD in disc tray 1 during power up.
22
3139 115 21281
pg 001-035/V795/21-Eng
22
4/16/02, 6:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
Notes:
2
To exit DIGEST mode, press digit 4 on the
remote control to select "EXIT DIGEST
MENU".
– Programme mode is not available whenever PBC
mode is switched on.
– The menu structure depends on the information
stored on theVCD. Please refer to the information
supplied with the disc.
A-B Repeat
This feature is also applicable to audio CD
(except for MP3-CD). To play a certain scene or
passage of the disc repeatedly.
Return
G Press RETURN to return to the previousVCD
disc MENU level. PBC mode must be switched
on.
1
2
Press A-B on the remote control during
playback to mark the start of the chosen scene
or passage.
G "SET A" appears on the display.
Press A-B again to mark the end of the chosen
scene or passage.
Digest
This feature allows you to scan through aVCD
for a quick review. PBC mode must be switched
off. There are four digest mode for selection.
G "SET B" appears on the display.
G The selected scene or passage is played
repeatedly.
1
Press DIGEST on the remote control.
G "DIGEST" appears on the display.
G "1.INTRO SCAN" , "2.DIGEST DISC" ,
"3.DIGESTTRACK" and "4.EXIT DIGEST
MENU" appear on theTV screen.
G "PLAY AB" appears on the display.
Press A-B once more to return to normal
playback.
3
G "CLEAR AB" appears on the display.
Notes:
– You can also cancel A-B Repeat by pressingí
orë.
– You can only able to set the A-B marking within
the same track. Once it crosses from one track to
the next, the A-B marking is reset.
1. INTRO SCAN
2. DIGEST DISC
3. DIGESTTRACK
4. EXIT DIGEST MENU
Zoom
G Press digit 1 on the remote control to select
"INTRO SCAN".
G The first 10 seconds of each track are played.
G Press digit 2 on the remote control to select
"DIGEST DISC".
This feature enables you to view a still picture
frame in an enlarge mode.
1
2
During playback, press PAUSE ÉÅ to have a
still picture on theTV screen.
G The sound will be muted.
G OnTV screen,“PAUSE” will be displayed.
Press ZOOM on the remote control once to
enlarge the still picture by 2 times.
G The first frame of each track appears on the
TV screen.
G Press digit 0 – 9 on the remote control to
playback the desired tracks.
G Press í or ë to view the previous or next
page for additional information.
G Press digit 3 on the remote control to select
"DIGESTTRACK".
G "ZOOM" appears on theTV screen.
G You can move the zoomed picture left or right
by pressing à or á respectively.
G You can move the zoom picture down or up by
pressing í or ë respectively.
G The first track of the selected disc will be
divided into 9 parts and displayed on theTV
screen.
3
Press ZOOM once more to return to normal
still frame.
G Press digit 0 – 9 on the remote control to
playback the desired parts.
4
Press PLAY ÉÅ to continue playback.
G Press í or ë to digest the next track.
23
3139 115 21281
4/16/02, 6:43 PM
pg 001-035/V795/21-Eng
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD/MP3-CD Operations
Key Control ( I È i )
This feature allows you to change the key tone
Resume
This feature is also applicable to audio CD
of your vocal range.
(except for MP3-CD).
G Press I on the remote control to decrease
vocal key level.
G "KEY -X" and appears on the display.
G Press i on the remote control to increase vocal
key level.
G "KEY +X" appears on the display.
G Press È on the remote control to restore vocal
key to original setting.
G In stop mode, press RESUME on the remote
control to start playback again from where you
have stopped.
Note:
– Resume information is lost if you have changed
the disc, opened the disc tray, change source or
disconnected the system from the power supply.
– Resume is not available when PBC mode is
switched on.
G "KEY FLAT" appears on the display.
Note:
– “X” denotes the key level.
Slow
1
2
Press SLOW on the remote control to watch a
VCD at a slower speed.There are 3 types of
slow modes to select.
G The sound will be muted.
G OnTV screen,“SLOW 1”, “SLOW 2” or
“SLOW 3” will be displayed.
Echo
This feature allows you to add echo while singing
or talking through a microphone.
G Press ECHO -/+ on the remote control to
decrease, increase or switch off the echo effect.
G "ECHO -X", "ECHO +X" or "ECHO OFF"
appears on the display.
To resume playback at normal speed, press
PLAYÉÅ.
Notes:
Vocal
– “X” denotes the echo level.
– You are advised to switch off the echo effect
when not using the feature.
– If microphone is not inserted,“INSERT MIC”
will be displayed.
This feature allows you to fade out the original
vocal from a karaokeVCD.This feature is used
together with Echo mode.You can also use it to
select the different audio modes.
– Echo will switch off automatically when unplug
the microphone from the system.
G Pressing VOCAL on the remote control
repeatedly allows you to select the following
modes.
G STEREO ™ STEREO VOCAL LEFT ™
STEREO VOCAL RIGHT ™ MONO LEFT ™
MONO RIGHT ™ STEREO…
STEREO – same effect as the original recorded
disc.
STEREOVOCAL LEFT/RIGHT – fade out the
original vocal for special recorded Karaoke disc
only (with the ECHO mode switched on).
MONO LEFT/RIGHT – select the language on a
bilingualVCD.
Ensure that Echo mode is switched on
when press VOCAL to fade out the original
vocal during STEREOVOCAL LEFT/RIGHT
mode.
24
3139 115 21281
pg 001-035/V795/21-Eng
24
4/16/02, 6:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
VCD MINI HIFI SYSTEM
FW-
VOLUME
STANDBY-ON
OSD
2
VCD 123
MP3 123
1
AUX
TUNER TAPE 1/2
2
3
6
ECO POWER
ECO POWER
4
5
8
0
MUSIC
LEVEL
VOLUME
INTERACTIVE VU METER
GATION
JOG
-
CLOCK• AUTO
9
7
-
MP3 CD
DISPLAY
PROG
DUBBING REC
TIMER REPLAY
PROG
REPEAT
CD 1•2•3
BAND
E
VOLUME
VCD
PAL/
TUNER
AUX
NTSC
DEMO
STOP/
CLEAR
PLAY•
PAUSE
É
Å
SOURCE
TITLE
_
TITLE
ON•OFF
LEVEL
+
•
DYNAMIC AMPLIFICATION CONTROL
í
ë
TAPE
TAPE 1•2
CDR/DVD
Ç
MIC/
LEVEL
à
á
ALBUM
ALBUM
+
_
G The last preset radio station will then be
played when completed.
Storing Preset Radio Stations
You can store up to 40 preset radio stations in
the memory.
To stop storing the automatic preset
G Press PROG or Ç on the system.
Automatic Preset Programming
Note:
G Plug and Play setting (refer to “Basic Functions -
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Plug and Play”).
OR
1
Press TUNER (BAND) to selectTUNER mode.
G "TUNER" will be displayed. A few seconds
later, the current radio frequency will appear on
the display.
G If an FM station is received in stereo, will
appear on the display.
Manual Preset Programming
1
2
Press TUNER (BAND) repeatedly to select the
desired waveband : FM or MW.
Press PROG.
To begin automatic preset from a desired
preset number
G PROG will start flashing.
G The next available preset number will be
displayed for selection.
G Press í or ë to select the desired preset
number.
3
Press and hold à or á until the frequency
indication starts to change, then release.
G The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
To store the radio station to another
preset number
G If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
Press and hold PROG until "AUTO" appears on
the display.
2
G PROG will start flashing.
G Press í or ë to select the desired preset
G The system will start searching for all radio
stations on the FM band, then the MW band.
G All available radio stations with strong signal
strength will be stored automatically.
G The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
number.
4
Press PROG again to store the radio station.
G PROG will disappear from the display.
G Repeat steps 2–4 to store other preset radio
stations.
25
3139 115 21281
4/16/02, 6:44 PM
pg 001-035/V795/21-Eng
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
Tuning to a weak radio station
G Press à or á briefly and repeatedly until the
optimal reception is found.
ChangingTuning Grid
In some countries, the frequency step between
adjacent channels in the MW band is 10 kHz (9
kHz in some areas). The preset frequency step
in the factory is 9 kHz.
To stop storing the manual preset
G Press Ç on the system.
Changing the tuning grid will erase all
previously stored preset radio stations.
Notes:
– If you attempt to store more than 40 preset
radio stations, "PROGRAM FULL" will be
displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.
1
2
Disconnect the system from the AC power
supply (pull out the AC power cord).
While holding down TUNER and á on the
system, reconnect the system to the AC power
supply.
G The display will show "GRID 9" or
"GRID 10".
Tuning to Preset Radio Stations
G Once you’ve preset the radio stations, press í
or ë to select the desired preset number.
G The preset number, radio frequency, and
waveband will appear on the display.
Notes:
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
– The FM tuning grid also will be changed from
50 kHz to 100 kHz or vice versa.
Erasing a Preset Radio Station
1
2
Press í or ë to select the preset radio station
to be erased.
Press and hold Çon the system until “PRESET
DELETED” appears on the display.
G The radio frequency remain on the display.
G The preset numbers of all other preset radio
stations in the band with higher numbers are also
decreased by one.
G Repeat steps 1–2 to erase other preset radio
stations.
For Recording, please refer to “Tape
Operation/Recording”.
26
3139 115 21281
pg 001-035/V795/21-Eng
26
4/16/02, 6:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
VCD MINI HIFI SYSTEM
FW-
VOLUME
STANDBY-ON
OSD
2
VCD 123
MP3 123
1
AUX
TUNER TAPE 1/2
2
3
6
ECO POWER
ECO POWER
MUSIC
LEVEL
VOLUME
4
5
8
0
INTERACTIVE VU METER
GATION
JOG
-
CLOCK• AUTO
-
MP3 CD
DISPLAY
PROG
DUBBING REC
TIMER REPLAY
9
7
PROG
REPEAT
CD 1•2•3
BAND
E
VCD
PAL/
VOLUME
TUNER
AUX
NTSC
DEMO
STOP/
CLEAR
PLAY•
PAUSE
É
Å
SOURCE
ON•OFF
LEVEL
TITLE
_
TITLE
•
DYNAMIC AMPLIFICATION CONTROL
+
TAPE
í
ë
TAPE 1•2
CDR/DVD
MIC/
LEVEL
Ç
à
á
ALBUM
ALBUM
+
_
DSC
VAC
TITLE/
ALBUM
NAME
PBC RETURN DIGEST
A-B
ZOOM RESUME SLOW VOCAL
Ö
KEY CONTROL
IS
TAPE 1
TAPE 2
ECHO
wOOx
-
+
ON/OFF
LEVEL
IMPORTANT!
To stop playback
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
G Press Ç.
To change the playback mode
G Press AUTO REPLAY repeatedly to select the
different playback modes.
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer,TV or
speaker).
G "AUTO REPLAY" ( å ) or "ONCE" will
appear on the display.
AUTO REPLAY …the tape will rewind
automatically at the end of
playback and replay again. It will
replay up to a maximum of 20
times or until you press Ç.
Tape Playback
ONCE ..............the tape will playback the
selected side once and then stop.
1
2
Press çto open the tape
deck door.
Insert a recorded tape and
To rewind or fast forward when playback
is stopped
Press à or á.
close the tape door.
G Load the tape with the open
side down and the full spool
to the left.
1
2
Press Ç when you reached the desired passage.
3
Press TAPE (TAPE 1•2) repeatedly to select
tape deck 1 or tape deck 2.
G The selected tape deck number is displayed.
Press PLAYÉÅ to start playback.
To reset tape counter number
G When in stop mode, pressÇ.
G “T1 000” or “T2 000” will be displayed.
4
27
3139 115 21281
4/16/02, 6:44 PM
pg 001-035/V795/21-Eng
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
Notes:
Preparation for Recording
– The tape counter will automatically set to zero
after detecting end of tape.
1
2
Press TAPE (TAPE 1•2) to selectTAPE 2.
Load a recordable tape into tape deck 2 with full
spool to the left.
Prepare the source to be recorded.
VCD – load the disc(s).
General Information on
Recording
3
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
G If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
G For recording, use only tape of IEC type I
(normal tape).
G The recording level is set automatically, regardless
of the position of theVolume,VAC, DSC and so
forth.
When recording is in progress
G
starts flashing.
G It is not possible to listen to another sources
except when dubbing tapes.
G It is not possible to activate the timer function.
G The tape is secured at both ends with leader
tape. At the beginning and end
of the tape, nothing will be
recorded for six to seven
seconds.
G To prevent accidental recording,
break out the tab on the left
shoulder of the tape side you
want to protect.
G If “CHECK TAPE” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
OneTouch Recording/Recording
the mixed sound
Press VCD, TUNER or AUX to select the
source.
1
G You can connect a microphone to record the
mixed sound in tape deck 2 (refer to “Karaoke -
Microphone Mixing”).
2
3
Start playback of the selected source.
Press REC to start recording.
To stop recording
G Press Ç on the system.
Note:
– OneTouch Recording is not possible inTAPE
mode, "SELECT SOURCE" will be displayed.
IMPORTANT!
CD/VCD/MP3-CD Synchro
Recording
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
1
Press VCD to select the disc.
– Recording is possible only on tape deck 2.
G Press í or ë to select the desired track to
start recording.
G You can programme the tracks in the order you
want them to be recorded (refer to “CD/VCD/
MP3-CD Operation - Programming the disc
tracks”).
2
Press REC to start recording.
G The disc will start playback automatically.
28
3139 115 21281
4/16/02, 6:44 PM
pg 001-035/V795/21-Eng
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
To select another track during recording
Press PAUSEÉÅ to interrupt recording.
Pressí or ë to select the desired track.
Press PLAYÉÅ to resume recording.
G Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
1
2
3
To stop recording
To stop dubbing
G Press Ç.
G Recording and disc playback will stop
G Press Ç.
Notes:
simultaneously.
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
DubbingTapes
Load the prerecorded tape in tape deck 1.
G You can set the tape to the desired passage
1
– You can listen to another source while dubbing.
where recording will start.
2
Press DUBBING.
G Playing and recording will start simultaneously.
G "DUB OOO" will be displayed.
Karaoke
2
3
4
Press VCD, TUNER, TAPE or AUX to select
the source to be mixed and start playback.
Adjust the volume level of the source with
VOLUME control.
Adjust the microphone volume with microphone
LEVEL control.
MIC/
LEVEL
Note:
– Keep the microphone away from the speakers to
prevent howling.
Microphone Mixing
Connect a microphone (not supplied) to the
system allowing you to sing along with the
music source.
For Recording, please refer to “Tape
Operation/Recording”.
1
Connect a microphone to the MIC jack.
G Before connecting the microphone, set the
microphone LEVEL to the minimum level
to prevent howling sound.
29
3139 115 21281
pg 001-035/V795/21-Eng
29
4/16/02, 6:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
VCD MINI HIFI SYSTEM
FW-
VOLUME
STANDBY-ON
OSD
2
VCD 123
MP3 123
1
AUX
TUNER TAPE 1/2
2
3
6
ECO POWER
ECO POWER
MUSIC
LEVEL
VOLUME
4
7
5
8
0
INTERACTIVE VU METER
G
ATION JOG
-
CLOCK• AUTO
-
MP3 CD
DISPLAY
PROG
DUBBING REC
TIMER REPLAY
9
PROG
REPEAT
CD 1•2•3
BAND
E
VCD
PAL/
VOLUME
TUNER
AUX
NTSC
DEMO
STOP/
CLEAR
PLAY•
PAUSE
É
Å
SOURCE
ON•OFF
LEVEL
TITLE
TITLE
•
DYNAMIC AMPLIFICATION CONTROL
_
+
TAPE
í
ë
TAPE 1•2
CDR/DVD
MIC/
LEVEL
Ç
à
á
ALBUM
ALBUM
+
_
To exit without storing the setting
G Press Çon the system.
View Clock
The clock (if it is set) will be shown in Standby
mode.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
To view the clock in any source mode
(VCD orTUNER for example)
G Press CLOCK•TIMER.
G The clock will be displayed for a few seconds.
G If the clock has not been set, "--:--" will be
displayed.
Timer Setting
Clock Setting
The clock can be set in either 12-hour or
24-hour mode ("AM 12:00" or "00:00" for
example)
The system can switch on toVCD,TUNER, or
TAPE 2 mode automatically at a preset time,
serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
1
2
Press CLOCK•TIMER twice.
Press PROG on the system repeatedly to select
clock mode.
G If 12-hour mode is selected, "AM 12:00" will
start flashing.
G If 24-hour mode is selected, "00:00" will start
flashing.
Press à or á on the system repeatedly to set
the hour.
Press í or ë on the system repeatedly to set
the minute.
Press CLOCK•TIMER again to store the
setting.
3
4
5
G The clock will start working.
30
3139 115 21281
pg 001-035/V795/21-Eng
30
4/16/02, 6:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
To activate theTIMER (for the same preset
time and source)
Press and hold CLOCK•TIMER for more than
two seconds.
Press CLOCK•TIMER again to store the start
time.
G The last set timer information will be shown
1
2
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
G "AM 12:00" or "00:00" or the last timer
setting will start flashing.
1
2
G TIMER
will start flashing.
G The selected source will be lighted while
other available sources are flashing.
Press VCD, TUNER or TAPE to select the
desired source.
for a few seconds and TIMER
the display.
will appear on
G Before setting the timer, make sure the music
source has been prepared.
Notes:
– If the source selected isVCD, playback will begin
with the first track of the last selected disc or other
trays if disc is empty. If all the disc trays are empty,
TUNER will be selected instead.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
VCD – Load the disc(s).To start from a specific
track, make a programme (refer to “CD/VCD/
MP3-CD Operation - Programming the disc
tracks”).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
3
4
5
Press à or á on the system repeatedly to set
the hour for the timer to start.
Press í or ë on the system repeatedly to set
the minute for the timer to start.
Press CLOCK•TIMER to store the start time.
G "TIMER ON" will be displayed and followed
by the set timer "XX:XX" and then the selected
source.
G TIMER
will remain on the display.
G At the preset time, the selected source will play.
To exit without storing the setting
G Press Çon the system.
To deactivate theTIMER
1
2
Press and hold CLOCK•TIMER for more than
two seconds.
Press Çon the system to cancel the timer.
G The display will show "CANCEL" and TIMER
will disappear from the display.
31
3139 115 21281
pg 001-035/V795/21-Eng
31
4/16/02, 6:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
External Sources
2
Press AUX (CDR/DVD) repeatedly to select
CDR/DVD mode or normal AUX mode.
G "CDR/DVD" or "AUX" will be displayed.
STANDBY-ON
ECO POWER
ECO POWER
G If the sound from the external source is
MUSIC
LEVEL
VOLUME
INTERACTIVE VU METER
distorted, select CDR/DVD mode for listening.
CLOCK• AUTO
-
MP3 CD
DISPLAY
PROG
DUBBING REC
TIMER REPLAY
CD 1•2•3
BAND
Notes:
E
VCD
PAL/
TUNER
AUX
NTSC
DEMO
STOP/
CLEAR
PLAY•
PAUSE
– You are advised not to listen to and record from
the same source simultaneously.
SOURCE
ON•OFF
LEVEL
A
•
DYNAMIC AMPLIFICATION CONTROL
TAPE
TAPE 1•2
CDR/DVD
– All the navigation sound control features (DSC or
VAC for example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
MIC/
LEVEL
Listening to External Sources
1
Connect the audio out terminals of the external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
For Recording, please refer to “Tape
Operation/Recording”.
Maintenance
Cleaning the Cabinet
Cleaning the Heads and theTape Paths
G To ensure good recording and playback quality,
clean the heads A, the capstan(s) B, and
pressure roller(s) C after every 50 hours of
tape operation.
G Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
G When a disc becomes dirty,
G Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
clean it with a cleaning cloth.Wip
the centre out. Do not wipe in c
G Do not use solvents such as benz
commercially available cleaners, o
spray intended for analogue recor
G You also can clean the heads by playing a
cleaning tape once.
Cleaning the disc lens
G After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
C
B
A
B
C
Demagnetising the heads
G Use a demagnetising tape available at your
dealer.
32
3139 115 21281
4/16/02, 6:44 PM
pg 001-035/V795/21-Eng
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SPEAKERS
AMPLIFIER
Output power
Front left/right
System ..................... 3-way; Bass reflex system with
front firing wOOx
Total power .................................... 6000 W PMPO /
............................. 2 x 120 W + 2 x 110 W RMS(1)
Booster ................ 2800 W PMPO / 220 W RMS
Stereo Mode .... 3200 W PMPO / 240 W RMS
Signal-to-noise ratio.......................... ≥ 75 dBA (IEC)
Frequency response .........50 – 20000 Hz, 3 dB
Input sensitivity
AUX In / CDR/DVD In .................... 500 mV / 1V
Microphone .......................................................... 3.5 mV
Output
Impedance........................................................................ 6 Ω
wOOx ............... 1 x 6.5" front firing wOOx driver
Woofer ...................................................................... 1 x 6.5"
Tweeter.......................................................................... 1 x 2"
PolydomeTweeter ................................................... 1 x 1"
Dimensions (w x h x d) . 240 x 350 x 310 (mm)
Weight................................................................ 4.2 kg each
BOOSTER SPEAKERS
Speakers ....................................................................≥ 6 Ω
Booster Speakers .................................................≥ 6 Ω
System .......................................................................... 3-way
Impedance........................................................................ 6 Ω
Woofer .......................................................................... 2 x 4"
Tweeter.......................................................................... 1 x 2"
Dimensions (w x h x d) . 140 x 310 x 310 (mm)
Weight................................................................ 4.0 kg each
Headphones...................................... 32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10%THD)
DISC PLAYER
Number of programmable tracks ......................... 99
Frequency response .......................... 20 – 20000 Hz
Signal-to-noise ratio....................................... ≥ 76 dBA
Channel separation ..........................≥ 79 dB (1 kHz)
Total harmonic distortion............ < 0.02% (1 kHz)
MPEG 1 ................................................. VCD version 2.0
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ................................... 32 – 256 kbps
sampling frequencies ... 48 kHz, 44.1 kHz, 32 kHz
GENERAL
Material/finish ................................... Polystyrene/Metal
AC Power ............................ 110 – 127 / 220 – 240V;
....................................................... 50/60 Hz Switchable
Power Consumption
Active ...................................................................... 175 W
Standby ..................................................................... 25 W
Eco Power Standby ........................................... < 1 W
Dimensions (w x h x d) .. 265 x 310 x 390 (mm)
Weight (without speakers) .................................... 9 kg
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz)........... 530 – 1700 kHz
Tuning grid ............................................................9/10 kHz
Number of presets ........................................................ 40
Antenna
BOOSTER UNIT
Material/finish ................... Polystyrene/Metal/Wood
AC Power ............................ 110 – 127 / 220 – 240V;
....................................................... 50/60 Hz Switchable
Power Consumption
Active ...................................................................... 150 W
Standby ..................................................................... 25 W
Dimensions (w x h x d) .. 140 x 310 x 345 (mm)
Weight (without speakers) .................................. 7.0 kg
FM ....................................................................... 75 Ω wire
AM.............................................................. Loop antenna
TAPE PLAYER
Frequency response
Normal tape (type I)...... 80 – 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)................................. ≥ 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
Specifications and external appearance are
subject to change without notice.
33
3139 115 21281
4/16/02, 6:44 PM
pg 001-035/V795/21-Eng
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service centre.
Problem
Solution
DISC PLAYER OPERATION
“UNREADABLE DISC” is displayed.
–
–
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
–
–
Replace or clean the disc, see “Maintenance”.
Use a readable disc or correct recorded format
MP3-CD.
“NO DISC” is displayed.
No picture onTV screen.
No colour onTV.
–
–
–
Insert a disc.
Connect the cable between the system andTV.
Change the system to the respective PAL or
NTSC setting.
Cannot adjust theTV system to
PAL or NTSC.
–
Remove the MP-3 CD from disc tray 1 or press
DISC CHANGE twice to select a non MP3 disc
tray.
RADIO RECEPTION
Radio reception is poor.
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the Mini HiFi
System and yourTV orVCR.
TAPE OPERATION/RECORDING
Recording or playback cannot be made.
–
–
–
Clean deck parts, see “Maintenance”.
Use only NORMAL (IEC I) tape.
Apply a piece of adhesive tape over the missing
tab space.
The tape deck door cannot open.
–
Remove and reconnect the AC power plug and
switch on the system again.
34
3139 115 21281
pg 001-035/V795/21-Eng
34
4/16/02, 6:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
GENERAL
The system does not react when buttons
are pressed.
–
Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor
quality.
–
–
–
–
–
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
Make sure the MP3-CD was recorded within
32-256 kbps bit rate with sampling frequencies
at 48 kHz, 44.1 kHz or 32 kHz.
The left and right sound outputs are
reversed.
–
Check the speaker connections and location.
The remote control does not function
properly.
–
–
–
Select the source (VCD orTUNER, for example)
before pressing the function button (É,í,ë).
Reduce the distance between the remote control
and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
–
–
Replace the batteries.
Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working.
–
–
Set the clock correctly.
If a recording is in progress, stop the recording.
Not all lighted buttons are showing light.
The Clock/Timer setting is erased.
–
–
–
Press DISPLAY to select NORMAL or MODE 1
display mode.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features
Press and hold DEMO STOP Çon the system
automatically and buttons start flashing.
to switch off the demonstration.
35
3139 115 21281
pg 001-035/V795/21-Eng
35
4/16/02, 6:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|