VCD MP3-CD Mini Hi-Fi System
FW-V220
Video CD ver.2.0
3139 115 20823
28/05/2001, 09:03 AM
pg 01-032/V220/21-Eng
1
Download from Www.Somanuals.com. All Manuals Search And Download.
@
!
#
$
DISC 1
DISC 2
DISC 3
OPEN•CLOSE
DISC CHANGE
-
-
CD/CD R /CD RW COMPATIBLE
3VCD
C H A N G E R
CD SYNCHRO RECORDING
MP3-CD
PLAYBACK
0
1
VCD MP3-CD MINI HIFI SYSTEM
-
STANDBY ON
%
CD1 • 2 • 3
BAND
TUNER
TAPE 1 • 2
TAPE
VIDEO
VCD
PAL/NTSC
AUX
+
-
+
ALBUM
MP
3
CD
TITLE
^
&
2
3
L
PRESET
L
STOP•CLEAR PLAY•PAUSE PREV
DEMO STOP
NEXT
SEARCH•TUNING
DSC
PROGRAM RECORD DUBBING A.REPLAY
DIM
MICROPHONE LEVEL
-
4
5
6
7
8
9
PBC RETURNCLOCK•TIMER
VOLUME
*
(
)
¡
™
£
L
OPEN
L
OPEN
PLAY/REC
PLAYBACK
TAPE 1
TAPE 2
∞
≤
3
3139 115 20823
28/05/2001, 09:03 AM
pg 01-032/V220/21-Eng
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Optimum disc playability : ensuring
excellent picture quality
Philips components and modules for the various
CD applications have always enjoyed an excellent
reputation in the market place for super disc
playability - the ability to play discs which may be
scratched, soiled or not fully according to the
standard specification.This position has been
underlined by tests showing the superior
performance of the various Philips players, as well
as by the positive experiences of millions of
individual consumers around the world.
Presenting Super Error Correction
To ensure consistently good results when playing
Video CD discs of all quality grades and
conditions, Philips has introduced further
improvements in the system's playability.These
developments together are called Super Error
Correction, a proprietary Philips technology
optimizing the system's ability to handle less-than-
perfect discs with the minimum disturbance to
normal playing.
Constantly improving performance
As the penetration of the CD system has
increased, and new applications like CD-ROM
andVideo CD have become commonplace,
Philips Components - as the CD technology
inventor and as one of the major suppliers of CD
player modules in the industry - has constantly
improved the performance of its products.
One of the ways in which this benefits users is by
optimum disc playability.This is an important
parameter for CD players other than CD Audio,
and especially for theVideo CD applications,
because any loss of data from the disc will at best
cause disturbances in the reproduced picture, and
at worst can cause the player to lose track so that
disc playing fails.
By effectively eliminating virtually all errors arising
under normal playing conditions, Super Error
Correction ensures that the picture quality as
seen by the user is independent of disc play.The
video encoding and processing during mastering
of the disc, and the MPEG-1 decoding and video
encoding in the signal processing stages, are now
the only limiting factors for picture quality.
4
28/05/2001, 09:03 A3M139 115 20823
pg 01-032/V220/21-Eng
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 6
---------------------------------------------- 33
Bahasa Melayu ----------------------------------- 58
Bahasa Indonesia -------------------------------- 85
5
3139 115 20823
pg 01-032/V220/21-Eng
5
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
MP3 Disc
General Information
Album.................................................................... 21
Title ....................................................................... 21
Environmental Information ................................ 7
Supplied Accessories ........................................... 7
Safety Information ................................................ 7
Tuner
Tuning to radio stations .................................... 22
Storing Preset Stations................................ 22-23
Tuning to Preset Radio Stations ...................... 23
Changing the MW tuning grid ......................... 23
Preparation
Rear Connections ............................................. 8-9
Inserting batteries into the Remote Control 9
Controls
Controls on the player and remote
control .............................................................. 9-11
Tape
Loading a tape ..................................................... 24
Auto Replay ......................................................... 24
Tape Playback ...................................................... 25
Rewind/Fast Forward ........................................ 25
Operating the System
Plug and Play ........................................................ 12
Demostration Mode .......................................... 13
Switching On ....................................................... 13
Switching the system to standby mode ........ 13
Selecting the source .......................................... 13
DIM mode ...................................................... 13-14
Sound Control .................................................... 14
Aux
Selecting External Equipment .......................... 25
Recording
Recording the mixed sound / OneTouch
Recording ............................................................. 26
Dubbing tapes ..................................................... 27
Recording from other sources ........................ 27
VCD/CD Synchro Start Recording ................ 27
CD /VCD / MP3-CD
Discs for playback ........................................ 15-16
Loading a Disc ..................................................... 16
Disc Direct Play .................................................. 16
Playing a normal disc ......................................... 16
Disc Change ........................................................ 16
Selecting a desired track ............................. 16-17
Searching for a particular passage
Karaoke
Microphone Mixing ............................................ 27
Clock/Timer
during playback ................................................... 17
ProgrammingTracks........................................... 17
Reviewing the programme ............................... 17
Playing the programme ............................... 17-18
Erasing the programme ..................................... 18
Repeat ................................................................... 18
View Clock .......................................................... 28
Clock Setting ....................................................... 28
Timer Setting................................................. 28-29
Maintenance ..........................................................29
Specifications .......................................................30
TroubleShooting .....................................31-32
Video CD
Adjusting the TV System................................... 18
OSD – On Screen Display ......................... 18-19
Playing aVideo CD with PBC .......................... 19
Pause ..................................................................... 19
Slow ....................................................................... 19
Resume ................................................................. 19
Zoom .................................................................... 20
A-B repeat ........................................................... 20
Return ................................................................... 20
Digest .................................................................... 20
Vocal ...................................................................... 21
Echo....................................................................... 21
Key Control ......................................................... 21
6
3139 115 20823
pg 01-032/V220/21-Eng
6
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Safety Information
IMPORTANT:
PLEASE NOTETHATTHEVOLTAGE
SELECTOR LOCATED ATTHE REAR
OFTHIS SYSTEM IS PRESET AT 220V
FROMTHE FACTORY.
FOR COUNTRIESTHAT OPERATE AT
110-127V, PLEASE ADJUSTTO 110-127V
BEFOREYOU SWITCH ONTHE
SYSTEM.
¶
Before operating the player, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your player is identical with the
voltage of your local power supply. If not, please
consult your dealer.The typeplate is located at
the rear of your player.
¶
When the player is switched on, do not move it
around.
¶
¶
The type plate (which contains the serial
number) is located at the rear of the player.
Recording is permissible if copyright or
other rights of third parties are not
infringed.
¶
¶
Place the player on a solid base (e.g. a cabinet).
Place the player in a location with adequate
ventilation to prevent internal heat build-up in
your player. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from the each side.
Do not expose the player to excessive moisture,
rain, sand or heat sources.
¶
¶
Environmental Information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Under no circumstances should you repair the
player yourself, as this will invalidate the
warranty!
¶
If the player is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the player. Should this occur, the CD
player will not operate normally. Leave the
power on for about one hour with no disc in the
player until normal playback is possible.
Electrostatic discharge may cause unexpected
problems. See whether these problems
disappear if you unplug the AC power cord and
plug it in again after a few seconds.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
¶
¶
Supplied Accessories
Remote control
Batteries (two AA size) for remote control
AM loop antenna
FM wire antenna
–
–
–
–
–
–
To disconnect the player from the power
supply completely, remove the AC power
plug from the wall socket.
AC power cord
OneVideo cinch cable
7
3139 115 20823
pg 01-032/V220/21-Eng
7
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
C
L
R
B
A
FM AERIAL
75‰
FRONT
+
AM ANTENNA
R
—
—
VOLTAGE
SELECTOR
L
220V-
240V
+
F
110V-
127V
AC
MAINS
~
G
VIDEO
OUT
AUX IN
D
AUDIO OUT
E
W
¶
Connect the left speaker to Front terminal L,
with the coloured wire to + and the black wire
to -.
Clip the stripped portion of the speaker wire as
shown.
Rear Connections
A AM Loop Antenna Connection
¶
Connect the supplied loop antenna to the AM
ANTENNA terminal. Place the AM loop antenna
far away from the system and adjust its position
for the best reception.
12 mm
B FMWire Antenna Connection
unlock
lock
Connect the supplied FM wire antenna to the
FM AERIAL (FM ANTENNA) 75 Ω terminal.
Adjust the position of the FM antenna for the
best reception.
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminal.
– Do not connect speakers with impedance lower
than the speakers supplied. Please refer to
SPECIFICATION section of this manual.
Outdoor Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) 75 Ω terminal using a 75 Ω coaxial
wire.
FM AERIAL 75Ω
FM ANTENNA 75Ω
D Connecting other equipment to your
player
OR
You can connect the audio left and right OUT
terminals of a TV,VCR, Laser Disc player, DVD
player or CD Recorder to the AUX IN terminals
at the rear of the system.
C Speakers Connection
¶
Connect the right speaker to Front terminal R,
with the coloured wire to + and the black wire
to -.
8
3139 115 20823
pg 01-032/V220/21-Eng
8
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
E Video Out Connection
Inserting batteries into the
Connect theVIDEO OUT terminal at the rear of
the system to theTV orVCRVIDEO IN for
viewing or recording.
Remote Control
¶
Insert the batteries (Type R06 or AA) into the
remote control as shown in the battery
compartment.
F Adjusting the OperatingVoltage
Before connecting the AC power cord to the
wall outlet, make sure that the voltage selector at
the rear of the system is set to the local power
line voltage. If not, reset the selector before
connecting to the wall outlet.
CAUTION
G AC Power Supply
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
After all other connections have been made,
connect the AC power cord to the system and
to the wall outlet.
Controls (main system’s illustration on page 3)
8 RECORD
Controls on the player and
remote control
–
to start recording on tape deck 2.
9 DUBBING
to dub a tape in normal speed.
0 DISPLAY SCREEN
to view the current setting of the system.
1 STANDBY-ON y
switches the system to standby/on.
2 DBB (DYNAMIC BASS BOOST)
–
–
–
–
to switch on bass boost to enhance bass
response or to switch off bass boost.
! CD CHANGERTRAY
@ DISC CHANGE
3 DIGITAL SOUND CONTROL PANEL
to view the desired DSC display.
4 DSC (DIGITAL SOUND CONTROL)
–
to change disc(s).
# OPEN•CLOSE
to open or close the CD changer tray.
–
–
–
to select the desired sound effect :
$ DISC 1 / DISC 2 / DISC 3 (DISC DIRECT
OPTIMAL, JAZZ, ROCK orTECHNO.
5 PROGRAM
PLAY)
–
to select a disc tray for playback.
forVCD/CD/MP3-CD…to programme disc
tracks.
% SOURCE – to select the following:
VCD / (CD 1•2•3)
forTUNER ........ to programme preset radio
stations.
for CLOCK ....... to select 12 or 24 hour in clock
–
–
to selectVCD/CD mode (this system can
playback MP3-CD format disc also). WhenVCD/
CD playback is stopped, press to select the disc
tray 1, 2 or 3.
PAL / NTSC
to select corresponding PAL or NTSC system of
yourTV set (exception Multi-systemTV).
setting mode.
6 MICROPHONE
to connect microphone jack.
7 MIC LEVEL
–
–
to adjust the mixing level for karaoke or
microphone recording.
9
3139 115 20823
28/05/2001, 09:03 AM
pg 01-032/V220/21-Eng
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
TUNER / (BAND)
PREV í / NEXT ë(PRESET 4 3 )
(TITLE -/+)
for MP3-CD only…to select previous/nextTitle.
forVCD only…to move the zoomed picture
down or up.
forVCD with PBC on...........................
................................. to select next or previous MENU
orVCD track during playback.
forVCD/CD ..... to skip to the previous, or next
track.
–
–
–
to selectTuner mode.When in tuner mode,
press to select the waveband: FM or MW.
TAPE / (TAPE 1• 2)
to selectTape mode.When tape playback is
stopped, press to select either tape deck 1 or 2.
AUX (VIDEO)
to select sound from an external source (e.g.TV,
VCR, Laser Disc player, DVD player or CD
Recorder).
^ MODE SELECTION
forTUNER ........ to select a preset station in
memory.
for CLOCK ....... to set the minute (on the system
only).
SEARCH à á (TUNING à á )
(ALBUM -/+)
for MP3-CD only…to select previous/next
Album
forVCD only…to move the zoomed picture to
the left or right.
& VOLUME
– to increase or decrease the volume.
* n
forVCD/CD…to search backward/forward
during playback.
–
to connect headphones.
( DIM
forTUNER ......... to tune to a lower or higher radio
frequency.
forTAPE .............. to rewind or fast forward a tape.
for CLOCK ....... to set the hour (on the system
only).
–
to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
) CLOCK•TIMER
to view the clock, set the clock or set the timer.
¡ RETURN
– forVCD with PBC on to return to the previous
–
STOP•CLEAR Ç
forVCD/CD/MP3-CD…to stop disc playback or
to clear a programme.
MENU level during playback (for VCD version 2.0
only).
forTUNER ........ to stop programming (on the
system only).
™ PBC (PLAYBACK CONTROL)
–
to switch on or off PBC mode (for VCD version
forTAPE.............. to stop playback or recording.
for DEMO ......... to start or stop demonstration
mode (on the system only).
2.0 only).
£ A. REPLAY (AUTO REPLAY)
–
to select playback mode either in continuous
for CLOCK ....... to exit clock setting or cancel
timer (on the system only).
AUTO REPLAY or ONCE only.
≤ TAPE DECK 2
for PLUG & PLAY…to exit plug & play mode
and return to standby mode (on
the system only).
∞ TAPE DECK 1
§ OSD (ON SCREEN DISPLAY)
–
to switch on or off the on screen display on the
TV screen.
PLAY•PAUSE ÉÅ
forVCD/CD/MP3-CD…to start or interrupt
playback.
≥ INCREDIBLE SURROUND (not applicable
for this model)
forVCD only…to watch a still picture.
forTAPE.............. to start playback.
for PLUG & PLAY…to initiate and start plug &
play from standby/demo mode
(on the system only).
–
to switch on or off the surround sound effect.
• ZOOM
to enlarge a still picture on theTV screen (for
VCD operation only).
ª VOCAL
to fade out the vocal of the original song during
–
–
VCD playback or to switch between mono or
stereo mode during audio disc playback (for VCD/
CD/MP3 operation only).
10
3139 115 20823
pg 01-032/V220/21-Eng
10
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
º KEY CONTROL ( I È i
to change the key to suit your vocal range (for
VCD operation only).
........................... to decrease vocal key level.
)
–
OSD
2
TUNER TAPE 1/2
°
‡
I
§
%
VCD.CD 1/2/3 AUX
È.............................. to restore vocal key to original
setting.
i............................. to increase vocal key level.
1
4
2
3
6
⁄ ECHO -/+
5
8
0
–
to adjust the echo level for karaoke (for VCD
operation only).
9
7
¤ RESUME
to continue playback again from where you have
fl
&
PROG
REPEAT
5
&
^
^
≥
2
™
¡
•
ª
º
–
VOLUME
stopped. Only when PBC mode is switched off
(for VCD operation only).
ÉÅ
TITLE
-
TITLE
+
í
ë
‹ SLOW
to watch aVCD at a slower speed.There are 3
modes of selection (for VCD operation only).
› A - B
to playback a certain scene or passage of aVCD/
CD repeatedly.
fi DIGEST
to scan through aVCD or a particular track.
^
4
fi
›
‹
¤
⁄
–
Ç
à
ALBUM
-
á
ALBUM
+
IS
DBB
DSC
–
PBC RETURN DIGEST
A-B
ZOOM
RESUME
SLOW
Ö
–
VOCAL
ECHO
There are 4 modes of selection (for VCD
operation only).
fl REPEAT
-
+
KEY CONTROL
#
–
to repeat a disc track or the current disc.
‡ DIGIT 0 – 9
(numbers consisting more than two figures must be
keyed in within 2 seconds.)
forVCD with PBC on…to select an entry
level.
forVCD/CD/MP3-CD…to key in a disc track
to start playback or
............................ to select another track during
playback or
............................ to select a track for
programming.
° B
–
to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the source select
keys on the remote control (e.g. CD ,
TUNER, etc.).
– Then select the desired function (É, í,
ë, etc.).
11
3139 115 20823
28/05/2001, 09:03 AM
pg 01-032/V220/21-Eng
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the System
VCD MP3-CD MINI HIFI SYSTEM
-
STANDBY ON
CD1 • 2 • 3
BAND
TAPE 1 • 2
VIDEO
VCD
TUNER
TAPE
AUX
PAL/NTSC
+
-
+
ALBUM
MP
3
CD
TITLE
L
PRESET
L
STOP•CLEAR PLAY•PAUSE PREV
DEMO STOP
NEXT
SEARCH•TUNING
DSC
PROGRAM RECORD DUBBING A.REPLAY
DIM
MICROPHONE LEVEL
-
PBC RETURNCLOCK•TIMER
VOLUME
Important:
To reinstall the PLUG & PLAY
Before you operate the system, complete
the preparation procedures.
1
In Standby or Demostration mode, press and
hold PLAY for five seconds (on the system only)
“AUTO INSTALL- PRESS PLAY” will be
displayed.
Plug and Play
2
Press PLAY (on the system only) again to start
installation.
The system provides PLUG and PLAY feature
that allows you to store all available radio
stations automatically upon power up.
¶
To exit without storing the PLUG and PLAY,
If the PLUG and PLAY has not been
installed
press Ç button (on the system only).
Notes:
1
2
Upon power up,“AUTO INSTALL- PRESS
PLAY” will be displayed.
– PLUG and PLAY will be reinitiated again during
the next power up if :
Press PLAY (on the system only) to start
installation.
i) PLUG and PLAY installation was not
completed.
ii) No stereo frequency being detected during
PLUG and PLAY, "CHECK ANTENNA" will be
displayed.
➜ “INSTALL” will be displayed and followed by
“TUNER” and then "AUTO".
➜ The PROG starts flashing.
– You can store any radio stations manually or
automatically after PLUG and PLAY.
– When PLUG and PLAY is used, all previously
stored radio stations will be replaced.
– During PLUG and PLAY, if no button is pressed
within 15 seconds, the system will go to
demonstration mode (if demonstration mode is
enable)
➜ PLUG and PLAY will start searching for all
radio stations on FM band and then followed by
radio stations on MW band.
➜ All available radio stations with sufficient
signal strength will be stored. Up to 40 presets
may be stored.
➜ The last preset radio station will appear on
the display when PLUG and PLAY is completed.
12
3139 115 20823
pg 01-032/V220/21-Eng
12
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the System
Demonstration mode
The system has a demonstration mode that
Selecting the Source
Press the respective source selection button:
¶
shows the various features offered by the system.
VCD, TUNER, TAPE or AUX.
➜ The display indicates the selected source.
To disable the demonstration mode
Press and hold Ç (on the system only) for 5
seconds when the system is in demonstration
mode.
➜ "DEMO OFF" is displayed.
➜ The system will switch to standby mode.
¶
Note:
– For an external source, make sure you have
connected the audio left and right OUT terminals
of the external equipment (TV,VCR, Laser Disc
player, DVD player or CD Recorder) to the AUX IN
terminals.
To enable the demonstration mode
Press and hold Ç (on the system only) for 5
seconds when the system is in standby mode.
➜ The demonstration will begin.
¶
DIM mode
You can select the desired brightness for the
display.
Notes:
¶
Press DIM to select DIM 1, DIM 2, DIM 3 or
DIM OFF display mode.
➜ The DIM display lights up.
➜ "DIM 1", "DIM 2", "DIM 3" or "DIM OFF"
will be displayed depending on the mode
selected.
– If the demonstration mode has not been disabled,
it will resume 5 seconds later after the system
switches to standby mode.
– When the system is switched on from the main
power outlet, theVCD changer tray may open and
close again to initialize the set.
– Even though the AC power cord is removed from
and reconnected to the wall socket, the
demonstration will remain off until it is switched on
again.
Switching the system ON
¶
¶
Press VCD, TUNER, TAPE or AUX.
Press STANDBY-ON in demo.
You can also switch on the system by pressing
any one of theVCD DIRECT PLAY buttons.
Switching the system to standby
mode
¶
Press STANDBY-ON or B on the remote
control.
➜ The system will switch to standby mode.
13
3139 115 20823
pg 01-032/V220/21-Eng
13
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the System
DIM OFF - normal brightness with
Spectrum Analyser On
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or decrease the
sound level.
For Personal Listening
Connect the headphones plug to the n socket
at the front of the system.The speakers will be
muted.
DIM 1 - normal brightness with Spectrum
Analyser Off
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to enjoy special
sound effects that have preset equalizer settings,
providing the best music reproduction.
¶
Press DSC to select OPTIMAL, JAZZ, ROCK or
TECHNO.
DIM 2 - half brightness with Spectrum
Analyser On
➜ The Digital Sound Control display panel will
light up respectively.
➜ “OPTIMAL, JAZZ, ROCKor TECHNO” and
the respective flag will be displayed.
Note:
– When "OPTIMAL" sound is selected, DBB will be
switched on automatically.
DIM 3 - half brightness with Spectrum
Analyser Off and all LEDs on the system
will be switched off.
DYNAMIC BASS BOOST (DBB)
The DBB mode enhances the bass response.
¶
¶
Press DBB to switch on bass response.
➜ The DBB button lights up.
➜ “DBB ON” and the DBB flag will be displayed.
To switch off DBB
Press DBB again.
➜ The DBB button light is switched off.
➜ “DBB OFF” will be displayed.
Note:
– Some CDs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
14
3139 115 20823
pg 01-032/V220/21-Eng
14
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD /VCD / MP3-CD
DISC 1
DISC 2
DISC 3
OPEN•CLOSE
DISC CHANGE
-
-
CD/CD R /CD RW COMPATIBLE
3VCD
C H A N G E R
CD SYNCHRO RECORDING
MP3-CD
PLAYBACK
VCD MP3-CD MINI HIFI SYSTEM
-
STANDBY ON
CD1 • 2 • 3
BAND
TUNER
TAPE 1 • 2
VIDEO
VCD
PAL/NTSC
TAPE
AUX
+
-
+
ALBUM
MP
3
CD
TITLE
L
PRESET
L
STOP•CLEAR PLAY•PAUSE PREV
DEMO STOP
NEXT
SEARCH•TUNING
DSC
PROGRAM RECORD DUBBING A.REPLAY
MICROPHONE - LEVEL
DIM
PBC RETURNCLOCK•TIMER
VOLUME
Warning!
Discs for playback
1) This system is designed for conventional
discs. Do not use any accessories such as
disc stabilizer rings or disc treatment sheets,
etc., which may damage the disc
mechanism.
This system can play all digital audio disc,
finalised digital audio CD-Recordable, finalised
digital audio CD-Rewritable and MP3-CD format
discs.
2) Do not load more than one disc into each
tray.
3) When the VCD changer is loaded with discs,
do not turn over or shake the system.This
may jam the changer.
Support following MP3-CD formats:
G
G
G
G
Max.Track number per Album is 255
The max.ALB number is 32
The max. programme track number is 99
Supported sampling frequencies for MP3 disc
are: 32 kHz, 44.1 kHz, 48 kHz
You may load three discs in theVCD
changer for continuous playback without
interruption.
Before viewing theVideo CD, ensure that
the set is switched to corresponding PAL
or NTSC system of yourTV set
(exception Multi-systemTV).
G
Supported Bit-rates of MP3 disc are: 32, 64, 96,
128, 192, 256 (kbps)
Following formats can’t be supported
G
G
G
G
The files like *.WMA, *.AAC, *.DLF, *.M3U, *.PLS
Chinese filename
The non-session closed discs
The discs recorded under UDF format
15
3139 115 20823
pg 01-032/V220/21-Eng
15
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD /VCD / MP3-CD
Note:
Playing a normal disc
For normal VCD:
Ensure that the system is switched to the
corresponding PAL or NTSC system of your
TV set (except multi-systemTV).
– For mixed mode discs, only one mode will be
selected for playback depending on the recording
format.
Loading a Disc
Press VCD to selectVCD/CD mode.
Press OPEN•CLOSE.
1
Press PLAYÉÅto start playback.
➜ All the available discs will play once, then stop.
➜ The disc tray, track number and elapsed
playing time of the current track appear on the
display.
To interrupt playback, press PAUSEÉÅ.
➜ The playing time flashes.
To resume playback, press PLAYÉÅ again.
To stop playback, press Ç.
1
2
➜ The disc changer tray slides out.
Load a disc with the printed side up in the right
tray.
You can load another disc in the left tray.
To load the third disc, press the DISC
CHANGE button.
➜ The disc changer tray will rotate until the
empty tray is ready for loading.
Press OPEN•CLOSE to close the disc changer
tray.
3
¶
¶
¶
¶
2
Note:
– During Disc Reading mode, if you press any
button, "PLEASE WAIT" will be displayed.
4
➜ The total number of tracks and the playing
time of the selected disc appear on the display.
For MP3-CD only:
➜ The first Album and the firstTitle information
appear on the display.
Disc Change
You can change the outer two discs while the
third inner disc is stopped or is playing.
1
Press DISC CHANGE.
Note:
➜ The disc changer tray slides out.
Replace the discs in the left and right disc trays.
If you wish to change the inner disc during
playback, press DISC CHANGE again.
➜ "CHANGING DISC" will be displayed.
➜ The disc will stop playing.
➜ The disc changer tray will close to retrieve
the inner disc and then open again with the
inner disc accessible.
– To ensure good system performance, wait until
the disc changer completely reads the disc(s)
before proceeding.
– For MP3-CD, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
2
¶
Disc Direct Play
To start playback from a selected disc tray, press
DISC 1, DISC 2 or DISC 3 button.
3
Press OPEN•CLOSE to close the disc changer
tray.
¶
➜ All the available discs will play once, then stop.
Selecting a desired track
Selecting a desired track when playback
is stopped
¶
Press digit 0 – 9 on the remote control to
select the desired track.
➜ Playback will start immediately for the
selected track.
➜ The selected track number and elapsed
playing time appear on the display.
Note:
– Maximum track selection from digital keys on
remote control is 199 for MP3-CD and 99 for
16
3139 115 20823
pg 01-032/V220/21-Eng
16
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD /VCD / MP3-CD
VCD/CD.
from such aVCD.
1
2
Load the desired discs in the disc trays.
Press the VCD (CD 1•2•3) button to select the
disc tray.
➜ Programming can only be done on the
selected disc.
Press PROGRAM to start programming.
➜ The PROG flag starts flashing.
Pressí or ë (or digit 0-9 on the remote
control) to select the desired track.
For MP3-CD, press ALBUM -/+ and TITLE
-/+ to select the desired Album andTitle for
programming.
Press PROGRAM to store the track.
Repeat steps 4 to 5 to store other discs and
tracks.
Selecting a desired track during playback
Press í or ë (or digit 0-9 on the remote
control) until the desired track appears on the
display.
➜ The selected track number and elapsed
playing time appear on the display.
¶
¶
3
4
¶
If you press í once it will skip to the beginning
of the current track and play the track again.
For MP3-CD only
1
2
Press ALBUM -/+ (à or á) until the
desired Album appears on the display.
Press TITLE -/+ (í or ë) until the desired
Title appears on the display.
➜ The selected track number and elapsed
playing time appear on the display.
Press PLAYÉÅ to start playback.
5
¶
6
Press Ç once to end programming.
➜ The total number of tracks programmed and
total playing time appear on the display.
3
Searching for a particular
passage during playback
Press à or á to select 4 different search
speed.
➜ "FRX1" ; "FRX2" ; "FRX3" or "FRX4"
is displayed on theTV screen when you select a
fast rewind search.
➜ "FFX1" ; "FFX2" ; "FFX3" or "FFX4" is
displayed on theTV screen when you select a
fast forward search.
Notes:
– For MP3-CD, total playing time will not be
shown.
– If the total playing time is more than “99:59”
then “--:--” appears on the display instead of
the total playing time.
– During programming, if no button is pressed
within 20 seconds, the system will exit programme
mode automatically.
¶
➜ Normal playback will begin at the end of the
fast rewinding or forwarding of the selected
track.
Play returns to normal when PLAYÉÅ is
pressed or when a new track is selected.
Reviewing the programme
Reviewing of the programme is possible only
when playback is stopped.
Pressí or ë repeatedly to review the
programmed tracks.
¶
¶
¶
Press Ç to exit review mode.
ProgrammingTracks
Programming tracks of a loaded disc is possible
when playback is stopped.The display will
indicate the total tracks stored in the
programme. Up to 99 tracks can be stored in
the memory in any order.When 99 tracks are
stored and you attempt to store another track,
the display will show “PROGRAM FULL”.
Playing the programme
1
Press PLAYÉÅto start programme playback.
➜ “PLAY PROGRAM” will be displayed.
➜ The track number and elapsed playing time of
the current track will appear on the display.
If you press REPEAT during programme
playback, the current track or all programmed
tracks will be played repeatedly.
¶
Note:
– Programme cannot be used forVCDs when PBC
is switched on. Switch off PBC before storing tracks
➜ "REPEAT TRACK", "REPEAT PROGRAM" or
"REPEAT OFF" will be displayed.
➜ The REP and PROG flags appear on the
display.
17
3139 115 20823
pg 01-032/V220/21-Eng
17
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD /VCD / MP3-CD
2
Press Ç to stop programme playback.
Note:
VIDEO CD
– If you press any other DISC DIRECT PLAY
buttons, the system will play the selected disc or
track and the stored programme will be cleared.
OSD
2
VCD.CD 1/2/3 AUX
TUNER TAPE 1/2
Erasing the programme (when
playback is stopped)
Press Ç.
1
4
2
3
6
5
8
0
¶
7
9
➜ “PROGRAM CLEARED” will be displayed.
PROG
REPEAT
VOLUME
Note:
É
Å
TITLE
TITLE
-
+
í
ë
– The programme will be erased when the system
is disconnected from the power supply or switched
to standby mode when you change source or when
you change the programme disc.
Ç
à
ALBUM
-
á
ALBUM
+
IS
DBB
DSC
PBC RETURN DIGEST
A-B
ZOOM
RESUME
SLOW
Ö
VOCAL
ECHO
-
+
KEY CONTROL
Repeat (only on remote control)
#
You can play the current track or a disc
repeatedly.
Adjusting theTV System
Before viewing theVideo CD, ensure that the set
is switched to corresponding PAL or NTSC
system of yourTV set (exception Multi – system
TV).
1
Press REPEAT on the remote control to select
the various repeat modes.
➜ "REPEAT TRACK", "REPEAT DISC"or
"REPEAT OFF" will be displayed.
➜ The REP flag appears on the display.
The current track or disc will now be played
repeatedly until you pressÇ.
Press REPEAT until the "REPEAT OFF" mode
is displayed to resume normal playback.
➜ The REP flag disappears from the display.
¶
G
Press and hold PAL/NTSC for more than 2
seconds to switch between PAL or NTSCTV
system.
➜ AfterTV system is selected, the set will
automatically switch to the lastTV system setting
every time theVCD source is selected.
2
Notes:
– REPEAT DISC mode is not available during
programme play mode.
Note:
– Before adjusting theTV system, make sure that
there is no MP3-CD in disc tray 1 during power up.
OSD – On Screen Display
If you insertVCD/CD, yourTV screen will serve
as an additional display for messages (e.g. PLAY,
STOP), and information stored on theVCD/CD.
G
Press OSD on the remote control repeatedly to
switch ON or OFF.
When OSD is switched ON; you can see the
following display on theTV screen.
Below is an example of the OSD message.
18
3139 115 20823
pg 01-032/V220/21-Eng
18
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD /VCD / MP3-CD
SINGLE ELAPSED
PLAY
Pause
XX/TT MM:SS
1
2
Press PAUSEÉÅto have a still picture on the
TV screen.
➜ OnTV screen,“PAUSE” will be displayed.
Press PLAYÉÅagain to continue playback.
Notes:
– "XX" is the current track.
– "TT" is the total tracks.
– "MM" is in minutes.
– "SS" is in seconds.
Note:
– Audio is muted during Pause.
When OSD is switched off; there is no
information indicated on theTV screen.
Slow
1
2
Press SLOW on the remote control to watch a
VCD at a slower speed.There are 3 types of
slow modes to select.
➜ OnTV screen,“SLOW 1”, “SLOW 2” or
“SLOW 3” will be displayed.
Playing aVideo CD with PBC
VCD with PBC (Playback Control) will be
indicated on the display of the set and on your
TV screen as soon as they are inserted. PBC is a
predefined play sequence stored on theVCD.
Press PLAYÉÅ again to resume playback at
normal speed.
1
2
Switch on theTV, insert aVCD with PBC and
press PLAYÉÅto start playback.
MENU appears on theTV screen.
Note:
– Audio is muted in Slow mode.
If the menu consists of a list of titles, you
can select a sequence directly
Resume
This feature is also applicable to audio CD
(except for MP3-CD).
1
2
Select your choice with the digit keys 0 - 9 on
the remote control.TheVCD starts playing of
the selected sequence automatically.
➜ TheVCD starts playing of the selected
sequence automatically.
1
2
Press Ç to stop playback.
Press RESUME on the remote control to start
playback again from where you have stopped.
➜ "RESUME" appears on the display.
Press RETURN on the remote control to go
back to the previous menu.
Note:
Note:
– Resume information is lost if you select another
disc or the set is disconnected from the mains, the
system is switched to standby mode or when you
change source.
– If a menu consists of more than one page, press
¡
/
™
to go through the pages.
Switching off PBC
– Resume is not available when PBC mode is
switched on.
G
In stop mode, press PBC.
➜ OnTV screen,“PBC OFF” will be displayed.
Notes:
– Programme mode is not available whenever PBC
mode is switched on.
– The menu structure depends on the programme
stored on theVCD. Please refer to the information
supplied with the disc.
19
3139 115 20823
pg 01-032/V220/21-Eng
19
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD /VCD / MP3-CD
Return
Zoom
G
Press RETURN to return to the previousVCD
disc MENU level. It is functional only forVideo
CD when PBC is switched on.
This feature enables you to view a still picture
frame in an enlarge mode.
After you have pressed PAUSEÉÅto have a
still picture on theTV screen.
Digest
1
Press ZOOM once to enlarge the still picture
by 2 times.
This feature allows you to scan through aVCD
for a quick review. PBC mode must be switched
off.There are four digest mode for selection.
➜ "ZOOM" appears on theTV screen.
You can move the zoom picture left or right by
pressing à or á respectively.
You can move the zoom picture down or up by
pressing í or ë respectively.
G
G
2
3
1
Press DIGEST.
➜ "DIGEST" appears on the display.
➜ "1.INTRO SCAN" , "2.DIGEST DISC" ,
"3.DIGESTTRACK" and "4.EXIT DIGEST
MENU" appear on theTV screen.
Press ZOOM once more to return to normal
still frame.
Press PLAYÉÅ again on the remote control
to continue playback.
1. INTRO SCAN
2. DIGEST DISC
3. DIGESTTRACK
A-B Repeat
This feature is also applicable to audio CD
(except for MP3-CD).To play a certain scene or
passage of the disc repeatedly.
4. EXIT DIGEST MENU
1
2
Press A-B on the remote control during
playback to mark the start of the chosen scene
or passage.
➜ "SET A" appears on the display.
Press A-B again to mark the end of the chosen
scene or passage.
➜ "SET B" appears on the display.
➜ The selected scene or passage is played
repeatedly.
➜ "PLAY AB" appears on the display.
Press A-B once more to return to normal
playback.
G
G
Press digit 1 on the remote control to select
"INTRO SCAN".
➜ The first 10 seconds of each track are played.
Press digit 2 on the remote control to select
"DIGEST DISC".
➜ The first frame of each track appears on the
TV screen.
➜ Press digit 0 – 9 on the remote control to
playback the desired tracks.
➜ Press í or ë to view the previous or next
page for additional information.
Press digit 3 on the remote control to select
"DIGESTTRACK".
➜ The first track of the selected disc will be
divided into 9 parts and displayed on theTV
screen.
➜ Press digit 0 – 9 on the remote control to
playback the desired parts.
3
➜ "CLEAR AB" appears on the display.
G
Notes:
– You can also cancel A-B Repeat by pressingí
orë.
– You can only repeat a maximum of one track.
Once it cross from one track to the next, the A-B
marking is reset.
➜ Press í or ë to digest the next track.
Press digit 4 on the remote control to select
"EXIT DIGEST MENU".
G
➜ Digest mode will be exited.
20
3139 115 20823
pg 01-032/V220/21-Eng
20
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
CD /VCD / MP3-CD
MP3 Disc
Vocal
This feature allows you to fade out the original
vocal from a karaokeVCD.This feature is used
together with Echo mode.You can also use it to
select the different audio modes.
Album
This feature allows you to view and select the
next or previous MP3-CD Album.
G
G
STEREO – same effect as the original recorded
disc.
G
Press ALBUM -/+ (à or á) to scroll
through the previous or next Album name until
the desired Album appears on the display.
➜ The selected Album will appear on the
display and follow by "AXX TXXX".
STEREOVOCAL LEFT/RIGHT – fade out
the original vocal for special recorded Karaoke
disc only (with the ECHO mode switched on).
MONO LEFT/RIGHT – select the language
on a bilingualVCD.
G
Title
Ensure that Echo mode is switched on
when press VOCAL to fade out the original
vocal during STEREOVOCAL LEFT/RIGHT
mode.
This feature allows you to view and select the
next or previous MP3-CDTitle.
G
Press TITLE -/+(í, ë or digit 0-9 on the
remote control) to scroll through the previous or
nextTitle name until the desiredTitle appears on
the display.
➜ The selectedTitle will appear on the display
and followed by "AXX TXXX".
G
Pressing VOCAL repeatedly allows you to
select the following modes.
➜ STEREO ™ STEREO VOCAL LEFT ™
STEREO VOCAL RIGHT ™ MONO LEFT ™
MONO RIGHT ™ STEREO…
Note:
– "A" represents ALBUM and "T" represents
TITLE, "XX" or "XXX" is the current selected
Album orTitle number.
Echo
This feature allows you to add echo while singing
or talking through a microphone.
G
Press ECHO -/+ to decrease or increase
the echo effect.
➜ "ECHO +X", "ECHO -X" or “ECHO OFF"
appears on the display.
Notes:
– "X" denotes the echo level.
– You are advised to put echo to the minimum
level when you are not using the feature.
– Echo mode is switched off when echo is at the
minimum level.
Key Control ( I È i )
This feature allows you to change the key of
your vocal range.
G
G
G
Press I to decrease vocal key level.
➜ "KEY -X" appears on the display.
Press i to increase vocal key level.
➜ "KEY +X" appears on the display.
Press È to restore vocal key to original setting.
➜ "KEY FLAT" appears on the display.
Notes:
– "X" denotes the key level.
21
3139 115 20823
pg 01-032/V220/21-Eng
21
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
VCD MP3-CD MINI HIFI SYSTEM
-
STANDBY ON
CD1 • 2 • 3
BAND
TAPE 1 • 2
VIDEO
VCD
TUNER
TAPE
AUX
PAL/NTSC
+
-
+
ALBUM
MP
3
CD
TITLE
L
PRESETL
STOP•CLEAR PLAY•PAUSE PREV
DEMO STOP
NEXT
SEARCH•TUNING
DSC
PROGRAM RECORD DUBBING A.REPLAY
MICROPHONE - LEVEL
DIM
PBC RETURNCLOCK•TIMER
VOLUME
Automatic programming
Note:
1
2
Press TUNER (BAND).
– For 'PLUG & PLAY' feature, please refer to page
12.
Press PROGRAM for more than one second.
➜ The PROG flag starts flashing and “AUTO” will
be displayed.
➜ The system will search for every available
station in the FM waveband first, then search the
MW waveband.
➜ All available stations will be stored
automatically.The frequency and preset number
will be displayed briefly.
➜ The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
➜ The system will remain tuned to the last
stored preset radio station.
Tuning to radio stations
Press TUNER (BAND) to selectTUNER mode.
➜ “TUNER” will be displayed.
A few seconds later, the current radio frequency
will be displayed.
Press TUNER (BAND) again to select the
desired waveband : FM or MW.
Press à or á for more than one second, then
release.
➜ The display will show “SEARCH” until a radio
station with sufficient signal strength is found.
Repeat this procedure until the desired station is
reached.
1
2
3
¶
¶
Notes:
– You can cancel the automatic programming by
pressing PROGRAM or Ç (on the system only).
– If you want to reserve a section of preset
numbers, for example preset numbers 1 to 9,
select preset 10 before starting automatic
programming, only the preset numbers 10 to 40
will be programmed.
To tune to a weak station, briefly press à or
á repeatedly until the display shows the
desired frequency and/or when the best
reception has been obtained.
Storing Preset Stations
You can store up to 40 radio stations in the
memory.When a preset radio station is selected,
the preset number appears next to the
frequency on the display.
22
3139 115 20823
pg 01-032/V220/21-Eng
22
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
Manual programming
Press TUNER (BAND).
Changing the MW tuning grid (for
specific version only)
1
2
Press TUNER (BAND) again to select the
desired waveband : FM or MW.
Press PROGRAM for less than one second.
➜ The PROG flag starts flashing.
➜ The next available preset number will be
displayed for selection.
Press à or á to tune to the desired frequency.
If you wish to store the radio station to another
preset number, press 4 or 3 to select the
desired preset number.
The frequency step can be changed if necessary.
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz. In other parts of the world, it is 9 kHz.
The frequency step preset in the factory is
9 KHz.
3
4
¶
For MW Band
To change from 9 kHz to 10 kHz or vice
versa
5
Press PROGRAM again.
➜ The PROG flag disappears and the radio
station will be stored.
Changing of tuning grid will erase all
previously stored preset stations.
1
2
Disconnect the system from the AC power
supply (pull out the AC power cord).
Press and hold TUNER and TUNING á
while reconnecting the system to the AC power
supply.
¶
Repeat steps 3 – 5 to store other preset radio
stations.
Notes:
– When 40 radio stations are stored and you
attempt to store another radio station, the display
will show "PROGRAM FULL”. If you want to
change an existing preset number, repeat steps 3 –
5.
– You can cancel manual programming by
pressing Ç (on the system only).
– During programming, if no button is pressed
within 20 seconds, the system will exit programme
mode automatically.
➜ Display will show “GRID 10” or “GRID 9”.
Notes:
– GRID 9 indicates that the tuning grid is in step
of 9 kHz in MW band. GRID 10 indicates that the
tuning grid is in step of 10 kHz in MW band.
– FM tuning grid will also be changed from
50 kHz to 100 kHz or vice versa.
Tuning to Preset Radio Stations
¶
Press 4 or 3 to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband appear on the display.
23
3139 115 20823
pg 01-032/V220/21-Eng
23
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape
VCD MP3-CD MINI HIFI SYSTEM
-
STANDBY ON
CD1 • 2 • 3
BAND
TAPE 1 • 2
VIDEO
VCD
TUNER
TAPE
AUX
PAL/NTSC
+
-
CD
+
ALBUM
MP
3
TITLE
L
PRESET
L
STOP•CLEAR PLAY•PAUSE PREV
DEMO STOP
NEXT
SEARCH•TUNING
DSC
PROGRAM RECORD DUBBING A.REPLAY
MICROPHONE - LEVEL
DIM
PBC RETURNCLOCK•TIMER
VOLUME
L OPEN
L OPEN
PLAY/REC
PLAYBACK
TAPE 1
TAPE 2
Loading a tape
Auto Replay
1
2
3
Press OPEN.
The tape deck door opens.
Load the tape with the open side downward and
the full spool to the left.
¶
Press A. REPLAY to select either continuous
AUTO REPLAY or ONCE during tape playback.
➜ "AUTO REPLAY"( ) or "ONCE"(È) will
be displayed.
Notes:
– This feature is available during tape playback
only.
– When "AUTO REPLAY" is selected, the tape
will rewind automatically at the end of playback for
the selected side.Then it will start playing again. It
will replay up to a maximum of 20 times until you
press Ç.
4
Close the tape deck door.
– When "ONCE" is selected, the tape will play the
selected side once and then stop.
24
3139 115 20823
pg 01-032/V220/21-Eng
24
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape
During playback
Press and hold à or á until the desired
passage is located.
➜ “T1or T2” with “11 or 22”" scrolling left or
right will be displayed depending on which
button is pressed.
➜ During searching, the sound is reduced to a
low volume.
Tape Playback
¶
1
Press TAPE (TAPE 1•2) to selectTAPE mode.
➜ "TAPE 1" or "TAPE 2" will be displayed and
followed by "T1 222 " or "T2 222".
Load the tape into the selected tape deck.
Press PLAY ÉÅto start playback.
➜ "T1" or "T2" with "2" scrolling right will be
displayed.
2
3
➜ When you release à or á, the tape
continues playing.
¶
Press A.REPLAY to select the different type of
playback mode (see Auto Replay)
4
Press Ç to end playback.
➜ "T1" or "T2" with "222" will be displayed.
Notes:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (e.g. CD,
TUNER, or AUX).
– Before playing a tape, check and tighten slack
tape with a pencil. Slack tape may get jammed or
may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not recommended for
use in this system.
– Store the tapes at room temperature and do not
put them too close to a magnetic field (for
example, a transformer,TV, or speaker).
Rewind/Fast Forward
When playback is stopped
You can rewind or fast forward the tape by
pressing à or á respectively.
➜ If rewinding, "T1 1 or T2 1" with “1”
scrolling left will be displayed.
➜ If fast forwarding, "T1 2 or T2 2" with “2”
scrolling right will be displayed.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
1
2
Press Ç to stop rewinding or fast forwarding.
Aux
VCD MP3-CD MINI HIFI SYSTEM
-
STANDBY ON
CD1 • 2 • 3
BAND
TAPE 1 • 2
VIDEO
VCD
TUNER
TAPE
AUX
PAL/NTSC
+
-
+
ALBUM
MP
3
CD
TITLE
L
PRESET
L
STOP•CLEAR PLAY•PAUSE PREV
DEMO STOP
NEXT
SEARCH•TUNING
DSC
PROGRAM RECORD DUBBING A.REPLAY
MICROPHONE - LEVEL
DIM
PBC RETURNCLOCK•TIMER
VOLUME
¶
Press AUX to select the external equipment.
➜ "AUX" will be displayed.
Selecting External Equipment
If you have connected the audio out terminals of
the external equipment (TV,VCR, Laser Disc
player, DVD player or CD Recorder) to the
AUX IN terminals, you can hear the enhanced
sound from the system.
Note:
– All the sound control features (e.g. DSC, DBB,
etc.) are available for selection.
25
3139 115 20823
28/05/2001, 09:03 AM
pg 01-032/V220/21-Eng
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
VCD MP3-CD MINI HIFI SYSTEM
-
STANDBY ON
CD1 • 2 • 3
BAND
TAPE 1 • 2
VIDEO
VCD
TUNER
TAPE
AUX
PAL/NTSC
+
-
+
ALBUM
MP
3
CD
TITLE
L
PRESET
L
STOP•CLEAR PLAY•PAUSE PREV
DEMO STOP
NEXT
SEARCH•TUNING
DSC
PROGRAM RECORD DUBBING A.REPLAY
DIM
MICROPHONE LEVEL
-
PBC RETURNCLOCK•TIMER
VOLUME
L
OPEN
L
OPEN
PLAY/REC
PLAYBACK
TAPE 1
TAPE 2
Notes:
– If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
– For recording, use only tape of IEC type I
(normal tape).
– The tape is secured at both ends with leader
tape. At the beginning and end of tape, nothing
will be recorded for six to seven seconds.
– The recording level is set automatically,
regardless of the position ofVOLUME, Incredible
Surround or DSC.
Recording the mixed sound /
OneTouch Recording
During microphone mixing, you can record the
mixed sound on a tape in tape deck 2 except
dubbing mode.
For OneTouch Recording, as soon as you press
RECORD, the current source (VCD,TUNER or
AUX) will be recorded on tape deck 2.
¶
¶
1
2
Load a blank tape in tape deck 2.
Press RECORD to start recording.
➜ The REC starts flashing.
– To prevent accidental recording, break out the
tab on the left shoulder of the tape side that you
want to protect.
– If "CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear adhesive
tape over the opening.
3
Press Ç to stop recording.
Note:
– When you press RECORD while inTAPE mode,
"SELECT SOURCE" will be displayed. OneTouch
Recording is not possible inTAPE mode.
26
3139 115 20823
pg 01-032/V220/21-Eng
26
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
3
4
Press RECORD to start recording.
➜ The REC starts flashing.
Press Ç to stop recording.
Dubbing tapes (from tape deck 1 to tape
deck 2)
Press TAPE (TAPE 1•2 ) to select tape deck 2.
Load the prerecorded tape into tape deck 1 and
a blank tape into tape deck 2 with full spool to
the left.
1
2
Notes:
– During recording, it is not possible to listen to
another source.
3
¶
4
Press DUBBING.
➜ "DUB" with "2" scrolling right will be displayed.
Dubbing will start immediately.
➜ The REC starts flashing.
VCD/CD Synchro Start
Recording
Load a blank tape into tape deck 2 and a disc
into a disc tray.
Press VCD to selectVCD/CD mode.
You can programme the tracks in the order you
want them to be recorded (see Programming
Tracks). If not, select the disc by pressing VCD
(CD 1•2•3) and the tracks are recorded
according to the order on the selected disc.
Press RECORD to start recording.
➜ The REC flag starts flashing.
1
Press Ç to stop dubbing.
Notes:
2
¶
– At the end of side A, flip the tapes to side B and
repeat the procedure.
– Dubbing of tapes is only possible from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can switch to other source while dubbing.
3
¶
Disc will start playback automatically.
Press Ç to stop recording.
Recording from other sources
(only on tape deck 2)
4
1
Load a blank tape into tape deck 2 with the
open side downward.
2
¶
Press VCD, TUNER or AUX.
Start playback of the selected source.
Karaoke
Microphone Mixing
1
Set the MIC LEVEL control to the minimum
level to prevent acoustic feedback (e.g. a loud
howling sound) before you connect the
microphone.
MICROPHONE - LEVEL
2
Connect a microphone to the
MICROPHONE socket.
3
Press VCD, TUNER, TAPE or AUX.
Play the selected source.
Adjust the volume level with VOLUME control.
Adjust the MIC LEVEL control to the mixing
level that you want.
4
5
6
7
Start singing or talking through the microphone.
Note:
– Keep the mic away from the speakers to
prevent howling
27
3139 115 20823
pg 01-032/V220/21-Eng
27
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
VCD MP3-CD MINI HIFI SYSTEM
-
STANDBY ON
CD1 • 2 • 3
BAND
TAPE 1 • 2
VIDEO
VCD
TUNER
TAPE
AUX
PAL/NTSC
+
-
+
ALBUM
MP
3
CD
TITLE
L
PRESET
L
STOP•CLEAR PLAY•PAUSE PREV
DEMO STOP
NEXT
SEARCH•TUNING
DSC
PROGRAM RECORD DUBBING A.REPLAY
MICROPHONE - LEVEL
DIM
PBC RETURNCLOCK•TIMER
VOLUME
Notes:
View Clock
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
– When a power interruption occurs, the clock
setting is erased.
You can view the clock (if it is set) if the system
is in Standby mode or when any sound source is
selected (VCD,TUNER, etc.). The clock will be
displayed for about seven seconds.
¶
Press CLOCK•TIMER briefly (on the system
only).
Timer Setting
➜ “10:38 PM or 22:38” (the current time)
will be displayed depending on whether you
have selected 12- or 24-hour mode.
➜ “--:--” will be displayed if the clock is not
set.
¶
The system can switch on toVCD ,TUNER or
TAPE 2 mode automatically at a preset time. It
can serve as an alarm to wake you up.
Before setting the timer, make sure the clock is
set correctly.
The timer will always be switched on once it is
set.
The volume of the timer will increase
from the minimum level to the most
recently selected volume level.
¶
¶
¶
Clock Setting
The clock can be set in either 12- or 24-hour
mode, e.g. “12:00 AM“ or “00:00“. Before
setting the clock, you must be in theView Clock
mode.
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
➜ “12:00AM” or “00:00" or the last timer
setting starts flashing depending on whether you
have selected 12- or 24-hour mode.
➜ The TIMER starts flashing.
➜ The selected source is lit while other available
sources are flashing.
Press VCD , TUNER or TAPE to select the
desired source.
1
2
Press CLOCK•TIMER to select clock mode.
Press PROGRAM to select 12- and 24- hour
mode.
➜ If 12-hour mode is selected,“12:00“ starts
flashing and the AM lights up.
➜ If 24-hour mode is selected,“00:00” starts
flashing.
Set the hour with à or á on the system.
Set the minute with í or ëon the system.
Press CLOCK•TIMER again to store the
setting.
3
4
5
2
¶
Before selectingVCD orTAPE, make sure a disc
or tape is loaded in the disc tray or tape deck 2.
➜ The clock starts.
¶
To exit without storing the setting, press Çon
the system.
28
3139 115 20823
pg 01-032/V220/21-Eng
28
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
3
4
5
Press à or á on the system to set the hour
for the timer to start.
Press í or ë on the system to set the minute
for the timer to start.
Press CLOCK•TIMER to store the start time.
➜ The timer is now set.
➜ The TIMER remains on the display.
At the preset time, the timer will be activated.
➜ The selected source will be played.
To switch off theTIMER
Press and hold CLOCK•TIMER for more than
two seconds.
Press Ç on the system to cancel the timer.
➜ The timer is now switched off.
➜ The display will show "OFF" and the TIMER
disappears.
1
2
¶
To start theTIMER again (for the same
preset time and source)
Press and hold CLOCK•TIMER for more than
two seconds.
Press CLOCK•TIMER again to store the start
time.
➜ The timer is now on.
Notes:
1
2
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
– If the source selected isTUNER, the last tuned
frequency will be switched on.
– If the source selected isVCD, playback will begin
with the first track of the last selected disc or other
trays if disc is empty. If all the disc trays are empty,
theTUNER will be selected instead.
– The timer will not activate if a recording is in
progress.
➜ The TIMER appears on the display.
Maintenance
Cleaning the Cabinet
Cleaning the Heads and theTape Paths
To ensure good recording and playback quality,
clean the heads, the capstan(s), and pressure
roller(s) after every 50 hours of tape operation.
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
¶
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
¶
¶
¶
Cleaning Discs
¶
¶
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out.
Do not use solvents such as
benzine, thinner, commercially
available cleaners, or antistatic
spray intended for analogue records.
You can also clean the heads by playing a
cleaning tape once.
Demagnetizing the heads
Use a demagnetizing tape available at your
dealer.
¶
Cleaning the DISC lens
¶
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
29
3139 115 20823
pg 01-032/V220/21-Eng
29
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AMPLIFIER
TAPE DECK
Output power ................................. 2 x 20 W RMS (1)
............................................................................. 1000 PMPO
Signal-to-noise ratio.......................... ≥ 67 dBA (IEC)
Frequency response ......................... 80 – 15,000 Hz
Input sensitivity
Frequency response
Normal tape (type I) ........ 80 – 12,500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) .................................... ≥ 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
AUX In ...................................................................... 700 mV
Microphone .............................................................. 3.5 mV
Output
Speakers ....................................................................... ≥ 6 Ω
Headphones.......................................... 32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10%THD)
SPEAKERS
System .................... 2 way; double port bass reflex
Impedance........................................................................ 6 Ω
Woofer .................................................... 1 x 4" full range
Dimensions (w x h x d) ..... 210x 310x 235(mm)
Weight................................................................ 2.5 kg each
DISC PLAYER
GENERAL INFORMATION
Number of programmable tracks ......................... 99
Frequency response ......................... 20 – 20,000 Hz
Signal-to-noise ratio....................................... ≥ 80 dBA
Channel separation ..........................≥ 60 dB (1 kHz)
Total harmonic distortion........................... < 0.003%
MPEG 1 ................................................. VCD version 2.0
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ................................... 32 – 256 kbps
sampling frequencies ... 48 kHz, 44.1 kHz, 32 kHz
Material .............................................................. Polystyrene
................................................110 - 127 / 220 - 240V~;
............................................................ 50/60Hz; Switchable
Power Consumption
Active ............................................................................. 44 W
Standby ..................................................................... < 15 W
Dimensions (w x h x d) ..... 265x 310x 320(mm)
Weight (without speakers)................................. 5.6 kg
Subject to modification
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz)........... 530 – 1700 kHz
Tuning grid ............................................................9/10 kHz
Number of presets ........................................................ 40
Antenna
FM..................................................................... 75 Ω wire
AM ............................................................ Loop antenna
30
3139 115 20823
pg 01-032/V220/21-Eng
30
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Do not open the player as there is a risk of electric shock! Under no circumstances
should you try to repair the player yourself, as this will invalidate the warranty
If a fault occurs, first check the points listed below before taking the player for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
service centre.
Symptom
Remedy
DISC PLAYER OPERATION
“UNREADABLE DISC” is displayed.
–
–
–
–
If the disc is inserted upside down.
Moisture condensation at the lens.
The disc is dirty, badly scratched or warped.
The disc lens is dirty or dusty, refer to section
under Maintenance.
–
–
–
–
An incorrect MP3-CD format disc is inserted
“NO DISC” is displayed.
No picture onTV screen.
No colour onTV.
There is no disc in the disc tray.
Connect the cable betwen the system andTV.
Change the system to the respective PAL or
NTSC setting.
Cannot adjust theTV system to
PAL or NTSC.
–
Remove the MP-3 CD from disc tray 1 or press
DISC CHANGE to select a non MP3 disc tray
before adjusting theTV system.
RADIO RECEPTION
Poor radio reception.
–
The signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
–
–
TheTV orVCR is too close to the stereo
system.
Cannot tune to station
Wrong tuning grid.
TAPE DECK OPERATION
Recording or playback cannot be
made or there is a decrease in audio
level.
–
–
Dirty tape heads, capstans or pressure
rollers, refer to section under Maintenance.
Magnetic build-up in the record/playback head,
use demagnetizing tape.
Tape deck door cannot open.
–
Reconnect the AC power plug and switch on
the system again.
31
3139 115 20823
pg 01-032/V220/21-Eng
31
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
GENERAL
System does not react when any
button is pressed.
–
Press STANDBY-ON to switch the system
off. Remove the AC power plug from the wall
outlet, then reconnect the power plug and
switch on the system again.
No or poor sound.
–
–
–
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected
correctly.
–
–
Check if the stripped speaker wire is clamped.
Make sure the MP3-CD was recorded within
32-256 kbps bit rate with sampling frequencies
at 48 kHz, 44.1 kHz or 32 kHz.
Reversed left and right sound.
–
–
Check the speaker connections and location.
Lack of bass sound or apparently
imprecise physical location of musical
instruments.
Check the speaker connection for proper
phasing, coloured/black wires to coloured/
black terminals.
Remote control has no effect on the
system.
–
Select the source (VCD,TUNER, etc.)
before pressing the function button (É,í,ë,
etc.).
–
–
Reduce the distance to the system.
Insert the batteries with their polarities
(+/- signs) as indicated.
–
Replace the batteries.
Timer is not working.
Clock setting is erased.
–
–
–
Set the clock.
Press CLOCK•TIMER to switch on the timer.
If recording is in progress, stop recording.
–
–
Reset the clock.
System displays features
automatically;buttons flash
continuously.
Press and hold Ç (on the system) for
five seconds to switch off the
demonstration.
All lighted buttons are not lit.
–
Press DIM until DIM OFF display mode is
shown.
32
3139 115 20823
pg 01-032/V220/21-Eng
32
28/05/2001, 09:03 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|