Mini Hi-Fi System
FWC555
12/11/01, 5:21 PM
pg 001-028/C555/21-Eng
1
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
8
3
D I S C D I R E C T P L A Y
DISC
5
4
DISC
OPEN•
CLOSE
DISC
1
2
DISC
3
CHANGE
-
-
CD/CD R /CD RW COMPATIBLE
CD
3
C H A N G E R
CD SYNCHRO RECORDING
MINI HIFI SYSTEM
FW-
VOLUME
3
STANDBY-ON
2
1
£
™
¡
)
9
0
ECO POWER
INTERACTIVE VU METER
G
I
CLOCK• AUTO
TIMER REPLAY
DISPLAY
PROG
DUBBING REC
CD 1•2•3
BAND
!
@
#
$
E
R
X
T
MAX SOUND
CD
TUNER
AUX
DEMO
PLAY•
PAUSE
STOP/
CLEAR
SOURCE
A
•
MAX BASS DYNAMIC AMPLIFICATION
CONTROL (DAC)
•
TAPE
•
MAX BASS PORT
TAPE 1•2
CDR/DVD
(
*
%
%
^
TAPE 1
TAPE 2
&
3
12/11/01, 5:21 PM 3139 115 21161
pg 001-028/C555/21-Eng
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
12/11/01, 5:21 PM 3139 115 21161
pg 001-028/C555/21-Eng
4
Download from Www.Somanuals.com. All Manuals Search And Download.
English ------------------------------------------------ 6
Français -------------------------------------------- 29
Español --------------------------------------------- 53
------------------------------------------------- 75
5
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Radio Reception
Environmental Information ................................ 7
Acknowledgement ............................................... 7
Supplied Accessories ........................................... 7
Safety Information ................................................ 7
Storing Preset Radio Stations ................... 19–20
Tuning to Preset Radio Stations ...................... 20
Erasing a Preset Radio Station ........................ 20
ChangingTuning Grid ........................................ 20
Preparations
Tape Operation/Recording
Rear Connections ............................................ 8–9
Optional Connections ........................................ 9
Inserting batteries into the remote
Tape Playback ...................................................... 21
General Information on Recording ................ 22
Preparation for Recording ............................... 22
OneTouch Recording........................................ 22
CD Synchro Recording ..................................... 22
DubbingTapes ..................................................... 23
control .................................................................... 9
Controls
Controls on the system and remote
control ........................................................... 10–11
External Sources
Listening to External Sources .......................... 23
Basic Functions
Clock/Timer
Plug and Play ........................................................ 12
Demonstration mode........................................ 12
Switching the system on ................................... 13
Switching the system to Standby mode ........ 13
Switching the system to Eco Power
View Clock .......................................................... 24
Clock Setting ....................................................... 24
Timer Setting................................................ 24–25
SleepTimer Setting ............................................ 25
Standby mode ..................................................... 13
Power Saving Automatic Standby.................... 13
Display mode....................................................... 14
Volume Control .................................................. 14
Sound Navigation ......................................... 14-15
Specifications ........................................... 26
Maintenance.............................................. 27
Troubleshooting ............................. 27–28
CD Operation
Discs for Playback .............................................. 16
Loading Discs ...................................................... 16
Disc Playback....................................................... 17
Programming the disc tracks .................... 17–18
Repeat ................................................................... 18
Shuffle.................................................................... 18
6
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
6
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
IMPORTANT!
Safety Information
PLEASE NOTETHATTHE VOLTAGE
SELECTOR LOCATED ATTHE REAR OF
THIS SYSTEM IS PRESET AT 220V FROM
THE FACTORY. FOR COUNTRIESTHAT
OPERATE AT 110V-127V, PLEASE ADJUST
TO 110V-127V BEFOREYOU SWITCH ON
THE SYSTEM.
G
Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
G
G
Place the system on a flat, hard and stable
surface.
Environmental Information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
G
G
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Acknowledgement
Energy Star
As an ENERGY STAR
Partner; Philips has
determined that this product
meets the ENERGY STAR
guidelines for energy efficiency.
G
G
R
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
R
Supplied accessories
– Remote control
– Batteries (two AA size) for remote control
– AM loop antenna
– FM wire antenna
– AC power cord
7
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
FM wire antenna
AM loop
antenna
speaker
(right)
speaker
(left)
R
L
AUX/
CDR
IN
B
AM ANTENNA FM ANTENNA
SUBWOOFER
OUT
AC
MAINS
+
R
C
VOLTAGE
SELECTOR
110V-
127V
—
—
L
220V-
240V
+
SPEAKERS 6Ω
A
AC power cord
Rear Connections
B Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals.Adjust the
position of the antenna for optimal reception.
The type plate is located at the rear of the
system.
A Power
AM Antenna
Before connecting the AC power cord to the
wall outlet, ensure that the following are done;
– If your system is equipped with a
VOLTAGE
SELECTOR
Voltage Selector, set theVOLTAGE
SELECTOR to the local power line
voltage.
110V-
127V
220V-
240V
G
Position the antenna as far as possible from aTV,
VCR or other radiation source.
– All other connections have been made.
WARNING!
– For optimal performance, use only the
original power cable.
FM Antenna
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
G
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
8
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Inserting batteries into the Remote
C Speakers Connection
Control
Front Speakers
Insert two batteries (Type R06 or AA) into the
remote control with the correct polarity as
indicated| by the + and - symbols inside the
battery compartment.
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to "R" and left
speaker to "L", coloured (marked) wire to "+"
and black (unmarked) wire to "-".
2
1
1
2
G
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
Optional Connections
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting other equipment to your
system
Connect the audio left and right OUT terminals
of a TV,VCR, Laser Disc player, DVD player or
CD Recorder to the AUX/CDR IN terminals.
Notes:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX/CDR IN left terminal. Alternatively, you
can use a “single to double” cinch cable (still be
mono sound).
9
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls (main system’s illustration on page 3)
$ MAX SOUND (MAX ON/OFF)
Controls on the system and
remote control
–
to activate or deactivate the optimal mix of
various sound features.
1 ECO POWER
% ç
–
to switch the system on or to Eco Power
Standby mode.
–
to open the tape deck door.
^ TAPE DECK 2
& TAPE DECK 1
* SOURCE – to select the following:
CD / (CD 1•2•3)
–
–
–
–
2 STANDBY ON y
to switch the system on or to Standby mode.
3 DISPLAY SCREEN
to view the current status of the system.
–
–
to select disc tray 1, 2 or 3.
TUNER / (BAND)
to select waveband : FM or MW.
TAPE / (TAPE 1• 2)
to select tape deck 1 or 2.
AUX / (CDR/DVD)
to select a connected external source :
CDR/DVD or AUX (auxiliary) mode.
4 DISCTRAY
5 DISC CHANGE
–
to change disc(s).
6 DISC 1 / DISC 2 / DISC 3 (CD DIRECT)
to select a disc tray for playback.
7 OPEN•CLOSE
to open or close the disc tray.
8 INTERACTIVEVU METER
–
–
( n
–
to show theVU (volume unit) meter in music or
volume mode depending on the display mode
selected.
–
to connect headphones.
) Mode Selection
PLAY PAUSE ÉÅ
9 VOLUME
for CD ................. to start or interrupt playback.
forTAPE.............. to start playback.
for PLUG & PLAY…(on the system only) to
initiate and start plug & play
–
to increase or decrease the volume.
0 Tape Deck Operation
AUTO REPLAY
–
to select continuous playback in either AUTO
PLAY or ONCE mode only.
DUBBING
to dub a tape.
REC
mode.
SEARCH•TUNING à á
for CD ................. to search backward/forward.
forTUNER ........ to tune to a lower or higher
radio frequency.
forTAPE.............. to rewind or fast forward.
for CLOCK ....... (on the system only) to set the
hour.
DEMO STOP/CLEAR Ç
for CD ................. to stop playback or to clear a
programme.
forTUNER ........ to stop programming.
................................. (on the system only) to delete the
preset radio station.
–
–
to start recording on tape deck 2.
! SOUND NAVIGATION
–
to select the desired sound feature : DSC,VAC,
or DBB.
@ JOG CONTROL
–
to select the desired sound effect for the
selected sound feature.
DSC ..................DIGITAL, ROCK, POP, NEWAGE,
CLASSIC or ELECTRIC.
VAC ..................HALL, CONCERT, CINEMA,
DISCO,ARCADE or CYBER.
DBB ..................BEAT, PUNCH or BLAST.
forTAPE.............. to stop playback or recording.
................................. to reset tape counter number.
for DEMO ......... (on the system only) to activate/
deactivate the demonstration.
for CLOCK ....... (on the system only) to exit clock
setting or cancel timer.
# INCREDIBLE SURROUND (IS)
–
to activate or deactivate the surround sound
effect.
for PLUG & PLAY…(on the system only) to exit
plug & play mode.
10
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
PREV / PRESET / NEXT í ë
for CD ................. to skip to the beginning of the
current, previous, or next track.
forTUNER ........ to select a preset radio station.
for CLOCK ....... (on the system only) to set the
minute.
º
*
¡ DISPLAY
#
ª
≤
6
∞
¡
0
9
–
to select different screen display mode :
NORMAL, MODE 1, MODE 2, or MODE 3.
™ PROG (PROGRAM)
for CD ................. to programme disc tracks.
forTUNER ........ to programme preset radio
stations.
for CLOCK ....... (on the system only) to select 12-
or 24-hour clock mode.
•
)
9
£ CLOCK•TIMER
–
to view the clock, set the clock or set the timer.
)
§
≤ MUTE
–
∞ CLOCK
–
to interrupt or resume sound reproduction.
™
to view the clock display.
≥
$
§ REPEAT
–
to playback track(s)/disc(s)/programme
repeatedly.
≥ SHUFFLE
to playback all available discs and their tracks/
programme in random order.
• TIMER ON/OFF
to activate or deactivate the timer.
ª SLEEP
!
!
–
!
–
–
to activate, deactivate or set the sleep timer.
º B
–
–
to switch the system to Standby mode.
to switch the system to Eco Power Standby
mode.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD 123 or
TUNER, for example).
– Then select the desired function (É, í,
ë, for example).
11
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
MINI HIFI SYSTEM
FW-
VOLUME
STANDBY-ON
ECO POWER
INTERACTIVE VU METER
G
I
N
N
N
CLOCK• AUTO
DISPLAY
PROG
DUBBING REC
O
TIMER REPLAY
D
C
CD 1•2•3
BAND
E
R
N
E
R
X
T
MAX SOUND
CD
TUNER
AUX
D
L
N
B
DEMO
PLAY•
STOP/
CLEAR
PAUSE
C
SOURCE
I
G
I
A
R
•
MAX BASS DYNAMIC AMPLIFICATION
CONTROL (DAC)
•
TAPE
•
MAX BASS PORT
TAPE 1•2
CDR/DVD
IMPORTANT!
To reinstall Plug and Play
Before you operate the system, complete
the preparation procedures.
1
2
In Standby or Demonstration mode, press and
hold PLAYÉon the system until "AUTO
INSTALL- PRESS PLAY" is displayed.
Press PLAYÉagain to start installation.
➜ All previously stored radio stations will be
replaced.
Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
If Plug and Play has not been installed
When you turn on the system, "AUTO
INSTALL- PRESS PLAY" will be displayed.
Press PLAYÉon the system to start
installation.
➜ "INSTALL" will be displayed and followed by
"TUNER" and then "AUTO".
➜ PROG will start flashing.
To exit without storing the Plug and Play
Press Çon the system.
1
2
G
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If you do not complete Plug and Play installation,
Plug and Play will be reinitiated the next time you
turn on the power.
➜ The system will search for all radio stations
on the FM band, then the MW band.
➜ All available radio stations with sufficient signal
strength will be stored automatically.
➜ The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
➜ The last preset radio station will play when
Plug and Play is completed.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode automatically.
12
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
Switching the system to Standby
mode
In Demonstration mode
To activate the demonstration
In Standby mode, press and hold DEMO
STOPÇon the system until "DEMO ON" is
displayed.
G
G
Press and hold DEMO STOP Ç on the system.
G
G
In any other source mode (except Eco
Power Standby mode)
Press STANDBY ON (or B on the remote
control).
➜ The clock will appear on the display when the
system is in Standby mode.
➜ The demonstration will begin.
To deactivate the demonstration
Press and hold DEMO STOP Çon the system
until "DEMO OFF" is displayed.
➜ The system will switch to Standby mode.
Switching the system to Eco
Power Standby mode (< 1Watt)
Press ECO POWER (or press and hold B on
the remote control).
➜ "ECO POWER" will be displayed, then the
display screen will go blank.
Note:
– Even if you remove the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
G
Switching the system on
In Standby/Demonstration mode
Press STANDBY ON.
➜ The system will switch to the last selected
source.
Press CD, TUNER, TAPE, AUX (or CD 123,
TUNER, TAPE 1/2 or AUX/CDR on the
remote control).
➜ The low power ECO POWER LED will be
lighted.
G
G
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power Standby or Standby mode.
Power Saving Automatic Standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.
➜ The system will switch to the selected source.
Press any one of the DISC DIRECT PLAY
buttons or OPEN•CLOSE.
G
➜ The system will switch to CD mode.
In Eco Power Standby mode
G
G
Press ECO POWER.
➜ The system will switch to last selected source.
Press CD 123, TUNER, TAPE 1/2 or
AUX/CDR on the remote control.
➜ The system will switch to the selected source.
13
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Sound Navigation
Display mode
There are four different display modes for
selection.
For optimal sound listening, select only one
of the following navigation sound controls
at a time : MAX sound, DSC or VAC.
G
Press DISPLAY repeatedly to select NORMAL,
MODE 1, MODE 2, or MODE 3.
NORMAL ........All available LEDs will light up
and the display screen will have
full brightness. TheVU meter will
be in music mode.
MAX Sound
MAX sound provides the best mixture of
various sound features (DSC,VAC, DBB for
example).
MODE 1 ..........All available LEDs will light up
and the display screen will have
full brightness. TheVU meter will
be in volume mode.
MODE 2 ..........All available LEDs will light up
and the display screen will be at
half brightness. TheVU meter
will be in music mode.
G
Press MAX SOUND
(or MAX ON/OFF on
the remote control)
repeatedly to activate/
MAX SOUND
deactivate the optimal sound.
➜ If activated,
will appear on the display
and the MAX SOUND button lights up.
➜ If deactivated,“MAX OFF” will be displayed.
MODE 3 ..........The display screen will be at half
brightness. TheVU meter and all
LEDs will be off.
Note:
– When MAX sound is selected, all other sound
navigation will switch off automatically.
Volume Control
DSC (Digital Sound Control)
The DSC feature enables you to adjust the
system to suit your type of
music.
Adjust VOLUME to increase (turn knob
clockwise or pressVOLUME +) or decrease
(turn knob anti-clockwise or pressVOLUME -)
the sound level.
1
2
Press DSC.
➜ DSC button lights up
Adjust the JOG
CONTROL (or press
To listen through the headphones
Connect the headphones plug to the n socket
at the front of the system.
G
➜ The speakers will be muted.
DSC on the remote
control repeatedly) to select the desired Digital
Sound Control effect : DIGITAL, ROCK, POP,
NEWAGE, CLASSIC or ELECTRIC.
➜ The selected DSC will be highlighted.
To switch off the volume temporarily
Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" will be displayed.
To restore the volume, press MUTE again or
increase theVOLUME level.
G
G
Note:
– For a neutral sound effect, select CLASSIC.
14
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
VAC (Virtual Ambience Control)
TheVAC feature enables you to adjust the
system to select a type of environment.
Automatic DSC-DBB /VAC-DBB
selection
The best DBB setting is generated automatically
for each DSC orVAC selection. You can
manually select the DBB setting that best suits
your listening environment.
1
2
Press VAC.
➜ VAC button lights up.
Adjust the JOG
CONTROL (or press
Incredible Surround
VAC on the remote
The Incredible Surround magnifies the virtual
distance between the front speakers for an
incredibly wide, enveloping, stereo effect.
control repeatedly) to
select the desiredVirtual
Ambience Control effect : HALL, CONCERT,
CINEMA, DISCO,ARCADE or CYBER.
➜ The selectedVAC will be highlighted.
G
Press INCREDIBLE
SURROUND (or IS on
the remote control)
repeatedly to activate/
deactivate the surround
sound effect.
➜ If activated,
will appear on the display and the INCREDIBLE
SURROUND button lights up.
➜ If deactivated,“IS OFF” will be displayed.
Note:
– When you selectVAC, Incredible Surround will
switch on automatically.
DBB (Dynamic Bass Boost)
There are three DBB settings to enhance the
bass response.
1
2
Press DBB.
➜ DBB button lights up.
Adjust the JOG
CONTROL (or press
DBB on the remote
control repeatedly) to select
the desired Dynamic Bass Boost level : BEAT,
PUNCH, BLAST or DBB OFF.
➜ If “BEAT“ is selected,
the display.
➜ If “PUNCH“ is selected,
the display.
➜ If “BLAST“ is selected,
the display.
will appear on
will appear on
will appear on
➜ If “DBB OFF” is selected, DBB will be
deactivated.
Note:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, deactivate DBB or reduce the
volume.
15
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
3
DISC DIRECT PLAY
DISC
DISC
CHANGE
OPEN•
CLOSE
DISC
1
2
DISC
3
-
-
CD/CD R /CD RW COMPATIBLE
CD
3
C
H
A
N
G
E
R
CD SYNCHRO RECORDING
MINI HIFI SYSTEM
FW-
VOLUME
STANDBY-ON
ECO POWER
INTERACTIVE VU METER
G
CLOCK• AUTO
DISPLAY
PROG
DUBBING REC
TIMER REPLAY
CD 1•2•3
BAND
E
MAX SOUND
CD
TUNER
AUX
DEMO
PLAY•
STOP/
CLEAR
PAUSE
SOURCE
•
MAX BASS DYNAMIC AMPLIFICATION
CONTROL (DAC)
•
TAPE
•
MAX BASS PORT
TAPE 1•2
CDR/DVD
IMPORTANT!
Loading Discs
Press CD to select CD mode.
Press OPEN•CLOSE to open the disc tray.
Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray
is ready for loading.
– This system is designed for regular discs.
Therefore, do not use any accessories such
as disc stabiliser rings or disc treatment
sheets, etc., as offered on the market,
because they may jam the changer
mechanism.
1
2
3
– Do not load more than one disc into
each tray.
Discs for Playback
This system can playback all digital audio CD,
finalised digital audio CD-Recordable (CDR)
discs and finalised digital audio CD-Rewritable
(CDRW)discs.
DISC CHANGE
OPEN
DISC
1
DISC
2
DISC
3
1
F
IR
4
Press OPEN•CLOSE to close the disc tray.
➜ "READING" will be displayed. The selected
disc, total number of tracks and the playing time
will appear on the display.
➜ A lighted button indicates that a disc is loaded
on the disc tray.
Notes:
– Load the discs with the label side facing up.
– To ensure good system performance, wait until
the disc tray completely reads the disc(s) before
proceeding.
16
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
Replace discs during playback
Press DISC CHANGE.
To change the inner disc, press DISC
CHANGE again.
Disc Playback
1
2
a disc is loaded in the disc tray
➜ "DISC CHANGE" will be displayed and the
disc will stop playing.
➜ The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
the current selected disc tray is empty
the current selected disc tray is loaded
or playing
To play all discs on the disc tray
Press PLAYÉ.
➜ All the available discs will play once, then stop.
➜ During playback, the selected disc tray, track
number and elapsed playing time of the current
track will appear on the display.
G
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
2
3
4
Load the desired discs on the disc tray (refer to
“Loading Discs”).
Press PROG to start programming.
➜ PROG will start flashing.
Press CD (CD 1•2•3) or DISC 1/2/3 button
to select a disc.
Press í or ë repeatedly to select the desired
track.
Press PROG to store the track.
Repeat steps 3–5 to store other discs and
tracks.
Press PLAYÉto start programme playback.
➜ "PLAY PROGRAM" will be displayed.
To end programming without starting playback,
press Ç once .
To play one disc only
Press the DISC DIRECT PLAY button : DISC 1,
DISC 2 or DISC 3.
G
➜ The selected disc will play once, then stop.
To interrupt playback
Press PAUSEÅ.
To resume playback, press PLAYÉagain.
G
G
5
¶
To stop playback
Press Ç.
6
G
G
G
To search for a particular passage during
playback
Press and hold à or á and release it when
the desired passage is located.
➜ The total number of tracks programmed and
the total playing time will appear on the display.
Notes:
➜ During searching, the volume will be reduced.
– If the total playing time is more than "99:59"
or if one of the programmed tracks has a number
greater than 30, then "--:--" will appear on the
display instead of the total playing time.
– If you attempt to programme more than 40
tracks, "PROGRAM FULL" will be displayed.
– If you press any of the DISC DIRECT PLAY
buttons, the system will play the selected disc or
track, and the stored programme will be ignored
temporarily.The PROG symbol also will disappear
temporarily from the display. It will reappear when
playback of the selected disc ends.
To select a desired track
Press í or ë repeatedly until the desired
track appears on the display.
If playback is stopped, press PLAYÉto start
playback.
G
G
Note:
– In Shuffle mode, pressingí will cause the
player to skip only to the beginning of the current
track.
To skip to the beginning of the current
track during playback
Press í once.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.
G
17
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
To review the programme
Stop playback and press í or ë repeatedly.
Shuffle
G
G
All the available discs and their tracks or all the
programmed tracks can be played in random
order.
To exit review mode, press Ç.
To erase the entire programme
Press Ç once when playback is stopped or
twice during playback.
➜ "PROGRAM CLEARED" will be displayed.
➜ PROG will disappear from the display.
1
Press SHUFFLE on the remote control.
➜ "SHUFFLE" and SHUFF will appear on the
display.
The discs and the tracks will be played in
random order until you press Ç.
To resume normal playback, press SHUFFLE
again.
G
G
Note:
2
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
➜ SHUFF
will disappear from the display.
When you select REPEAT mode during
shuffling
Repeat
The current track, a disc, all available discs or all
programmed tracks can be played repeatedly.
G
G
In normal shuffled playback
➜ "TRACK" and "ALL DISC" repeat modes are
available for selection.
1
Press REPEAT on the remote control
repeatedly to select various repeat modes.
In normal playback
➜ "TRACK" – to repeat the current track.
"DISC" – to repeat the entire disc.
"ALL DISC" – to repeat all available discs.
➜ RPT
and SHUFF
will appear on the
display.
G
In programme shuffled playback
➜ "TRACK" or "PROGRAM" repeat modes are
available for selection.
➜ RPT
, SHUFF
and PROG will appear on the
➜ RPT
appears on the display.
display.
G
In programme playback
➜ "TRACK" – to repeat the current
programmed track.
"PROGRAM" – to repeat all programmed
tracks.
For Recording, please refer to “Tape
Operation/Recording”.
➜ RPT
and PROG will appear on the display.
G
The selected track/disc(s)/programme will now
be played repeatedly until you press Ç.
To resume normal playback, press REPEAT
until the "OFF" mode is displayed.
2
➜ RPT
will disappear from the display.
Note:
– Selecting SHUFFLE during repeat playback will
cancel all repeat modes.
18
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
MINI HIFI SYSTEM
FW-
VOLUME
STANDBY-ON
ECO POWER
INTERACTIVE VU METER
G
CLOCK• AUTO
DUBBING REC
TIMER REPLAY
DISPLAY
PROG
CD 1•2•3
BAND
E
MAX SOUND
CD
TUNER
AUX
DEMO
PLAY•
PAUSE
STOP/
CLEAR
SOURCE
•
MAX BASS DYNAMIC AMPLIFICATION
CONTROL (DAC)
•
TAPE
•
MAX BASS PORT
TAPE 1•2
CDR/DVD
To stop storing the automatic preset
Press PROG or Ç on the system.
Storing Preset Radio Stations
You can store up to 40 preset radio stations in
the memory.
G
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Automatic Preset Programming
G
Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
Manual Preset Programming
1
Press TUNER (BAND) to selectTUNER mode.
➜ "TUNER" will be displayed. A few seconds
later, the current radio frequency will appear on
the display.
1
2
Press TUNER (BAND) repeatedly to select the
desired waveband : FM or MW.
Press PROG.
➜ PROG will start flashing.
➜ If an FM station is received in stereo, will
appear on the display.
➜ The next available preset number will be
displayed for selection.
To begin automatic preset from a desired
preset number
Press í or ë to select the desired preset
number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
Press and hold PROG until "AUTO" appears on
the display.
3
Press and hold à or á until the frequency
indication starts to change, then release.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
To store the radio station to another
preset number
Press í or ë to select the desired preset
number.
Press PROG again to store the radio station.
➜ PROG will disappear from the display.
Repeat steps 2–4 to store other preset radio
stations.
G
G
4
G
2
➜ PROG will start flashing.
➜ The system will start searching for all radio
stations on the FM band, then the MW band.
➜ All available radio stations with sufficient signal
strength will be stored automatically.
➜ The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
➜ The last preset radio station will then be
played when completed.
Tuning to a weak radio station
Press à or á briefly and repeatedly until the
optimal reception is found.
G
G
To stop storing the manual preset
Press Ç on the system.
19
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
Notes:
ChangingTuning Grid (not available for
all versions)
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas). The preset
frequency step in the factory is 9 kHz.
– If you attempt to store more than 40 preset
radio stations, "PROGRAM FULL" will be
displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.
Changing the tuning grid will erase all
previously stored preset radio stations.
Tuning to Preset Radio Stations
1
2
Disconnect the system from the AC power
supply (pull out the AC power cord).
While holding down TUNER and á on the
system, reconnect the system to the AC power
supply.
G
Once you’ve preset the radio stations, press í
or ë to select the desired preset number.
➜ The preset number, radio frequency, and
waveband will appear on the display.
➜ The display will show "GRID 9" or "GRID
10".
Erasing a Preset Radio Station
1
2
Press í or ë to select the preset radio station
to be erased.
Notes:
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
– The FM tuning grid also will be changed from
50 kHz to 100 kHz or vice versa.
Press and hold Çon the system until “PRESET
DELETED” appears on the display.
➜ The radio frequency remain on the display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are also
decreased by one.
G
Repeat steps 1–2 to erase other preset radio
stations.
For Recording, please refer to “Tape
Operation/Recording”.
20
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
MINI HIFI SYSTEM
FW-
VOLUME
STANDBY-ON
ECO POWER
INTERACTIVE VU METER
G
CLOCK• AUTO
DUBBING REC
TIMER REPLAY
DISPLAY
PROG
CD 1•2•3
BAND
E
MAX SOUND
CD
TUNER
AUX
DEMO
PLAY•
PAUSE
STOP/
CLEAR
SOURCE
•
MAX BASS DYNAMIC AMPLIFICATION
CONTROL (DAC)
•
TAPE
•
MAX BASS PORT
TAPE 1•2
CDR/DVD
TAPE 1
TAPE 2
IMPORTANT!
To stop playback
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
G
G
Press Ç.
To change the playback mode
Press AUTO REPLAY repeatedly to select the
different playback modes.
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer,TV or
speaker).
➜ "AUTO REPLAY" ( å ) or "ONCE" will
appear on the display.
AUTO REPLAY …the tape will rewind
automatically at the end of
playback and replay again. It will
replay up to a maximum of 20
times until you press Ç.
Tape Playback
ONCE ..............the tape will playback the
selected side once and then stop.
1
2
G
Press çto open the tape deck door.
Insert a recorded tape and close the tape door.
Load the tape with the open side down and the
full spool to the left.
To rewind or fast forward when playback
is stopped
1
2
Press à or á.
Press Ç when you reached the desired passage.
To reset tape counter number
When in stop mode, pressÇ.
G
➜ “T1 000” or “T2 000” will be displayed.
3
4
Press TAPE (TAPE 1•2) repeatedly to select
tape deck 1 or tape deck 2.
➜ The selected tape deck number is displayed.
Press PLAYÉto start playback.
Notes:
– The tape counter will automatically set to zero
after detecting end of tape.
21
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
General Information on
Recording
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically, regardless
of the position of theVolume,VAC, DSC and so
forth.
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
Preparation for Recording
1
2
Press TAPE (TAPE 1•2) to selectTAPE 2.
Load a recordable tape into tape deck 2 with full
spool to the left.
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
G
G
3
G
G
When recording is in progress
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
➜
starts flashing.
G
G
It is not possible to listen to another sources
except when dubbing tapes.
It is not possible to activate the timer function.
OneTouch Recording
1
Press CD, TUNER or AUX to select the
source.
2
3
Start playback of the selected source.
Press REC to start recording.
G
If “CHECK TAPE” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
To stop recording
Press Ç on the system.
G
Note:
– OneTouch Recording is not possible inTAPE
mode, "SELECT SOURCE" will be displayed.
CD Synchro Recording
IMPORTANT!
1
Press CD 1•2•3 to select the disc.
Press í or ë to select the desired track to
start recording.
You can programme the tracks in the order you
want them to be recorded (refer to“CD
Operation - Programming the disc tracks”).
Press REC to start recording.
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
G
G
– Recording is possible only on tape deck 2.
2
➜ The disc will start playback automatically.
To select another track during recording
Press PAUSEÅ to interrupt recording.
Pressí or ë to select the desired track.
Press PLAYÉ to resume recording.
1
2
3
To stop recording
Press Ç.
G
➜ Recording and disc playback will stop
simultaneously.
22
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
To stop dubbing
Press Ç.
DubbingTapes
G
1
G
Load the prerecorded tape in tape deck 1.
You can set the tape to the desired passage
where recording will start.
Press DUBBING.
➜ Playing and recording will start simultaneously.
➜ "DUB OOO" will be displayed.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
2
– You can listen to another source while dubbing.
G
External Sources
G
If the sound from the external source is
distorted, select CDR/DVD mode for listening.
Notes:
– You are advised not to listen to and record from
the same source simultaneously.
INTERACTIVE VU METER
G
I
CLOCK• AUTO
DUBBING REC
TIMER REPLAY
DISPLAY
PROG
– All the navigation sound control features (DSC
orVAC for example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
CD 1•2•3
BAND
E
E
X
CD
TUNER
AUX
MAX SOUND
T
N
B
O
P/
PLAY•
PAUSE
AR
SOURCE
G
•
MAX BASS DYNAMIC AMPLIFICATION
CONTROL (DAC)
•
TAPE
•
MAX BASS PORT
TAPE 1•2
CDR/DVD
For Recording, please refer to “Tape
Operation/Recording”.
Listening to External Sources
1
2
Connect the audio out terminals of the external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
Press AUX (CDR/DVD) repeatedly to select
CDR/DVD mode or normal AUX mode.
➜ "CDR/DVD" or "AUX" will be displayed.
23
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
MINI HIFI SYSTEM
FW-
VOLUME
STANDBY-ON
ECO POWER
INTERACTIVE VU METER
G
I
CLOCK• AUTO
DUBBING REC
TIMER REPLAY
DISPLAY
PROG
CD 1•2•3
BAND
E
R
X
T
MAX SOUND
CD
TUNER
AUX
DEMO
PLAY•
STOP/
CLEAR
PAUSE
SOURCE
A
•
MAX BASS DYNAMIC AMPLIFICATION
CONTROL (DAC)
•
TAPE
•
MAX BASS PORT
TAPE 1•2
CDR/DVD
IMPORTANT!
To exit without storing the setting
– When in Eco Power Standby mode, it is
not possible to operate the clock or timer
function.
G
Press Çon the system.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
View Clock
The clock (if it is set) will be shown in Standby
mode.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
To view the clock in any source mode
(CD orTUNER for example)
Press CLOCK•TIMER (or CLOCK on the
remote control).
➜ The clock will be displayed for a few seconds.
➜ If the clock has not been set, "--:--" will be
displayed.
Timer Setting
G
The system can switch on to CD,TUNER, or
TAPE 2 mode automatically at a preset time,
serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
Clock Setting
The clock can be set in either 12-hour or
24-hour mode ("AM 12:00" or "00:00" for
example)
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
1
2
Press CLOCK•TIMER twice.
Press PROG on the system repeatedly to select
clock mode.
➜ If 12-hour mode is selected, "AM 12:00" will
start flashing.
➜ If 24-hour mode is selected, "00:00" will start
flashing.
Press à or á on the system repeatedly to set
the hour.
Press í or ë on the system repeatedly to set
the minute.
Press CLOCK•TIMER again to store the
setting.
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
➜ "AM 12:00" or "00:00" or the last timer
setting will start flashing.
3
4
5
➜ TIMER
will start flashing.
➜ The selected source will be lighted while
other available sources are flashing.
➜ The clock will start working.
24
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
2
Press CD, TUNER or TAPE to select the
desired source.
Before setting the timer, make sure the music
source has been prepared.
SleepTimer Setting
The sleep timer enables the system to switch to
Standby mode automatically within a preset
amount of time.
G
CD – Load the disc(s).To start from a specific
track, make a programme (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
Press à or á on the system repeatedly to set
the hour for the timer to start.
Press í or ë on the system repeatedly to set
the minute for the timer to start.
1
2
Press SLEEP on the remote control repeatedly
to select a preset amount of time.
➜ The selections are as follows (time in
minutes):
15™ 30™ 45™ 60™ OFF™ 15…
➜ "SLEEP XX" or "OFF" will be displayed. "XX"
is the time in minutes.
3
4
5
When you reach the desired length of time, stop
pressing the SLEEP button.
➜ SLEEP will appear on the display, except for
"OFF" mode.
➜ The SleepTimer is now set. Before the
system switches to standby mode, a countdown
of 10 seconds will be displayed.
Press CLOCK•TIMER to store the start time.
➜ "TIMER ON" will be displayed and followed
by the set timer "XX:XX" and then the selected
source.
➜ TIMER
will remain on the display.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
G
G
At the preset time, the selected source will play.
To exit without storing the setting
Press Çon the system.
While SLEEP mode is activated
To check the remaining length of time
Press SLEEP once.
Notes:
G
G
– If CD is the selected source and it is not
available when the preset time is reached,Tuner
will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
To change the preset sleep timer
Press SLEEP twice.
➜ The display will show the remaining time
followed by the sequence of sleep timer options.
To deactivate the SleepTimer
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
To deactivate theTIMER
G
G
G
Press TIMER ON/OFF on the remote control.
➜ The display will show "CANCEL" and TIMER
will disappear from the display.
To activate theTIMER
Press TIMER ON/OFF on the remote control.
➜ The last set timer information will be shown
for a few seconds and TIMER will appear on
the display.
25
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SPEAKERS
AMPLIFIER
Output power ........................................................................
.......................... 3500 W PMPO / 2 x 140 W RMS(1)
Signal-to-noise ratio.......................... ≥ 75 dBA (IEC)
Frequency response .........50 – 20000 Hz, 3 dB
Input sensitivity
AUX In / CDR/DVD In .................... 500 mV / 1V
Output
Speakers ....................................................................≥ 6 Ω
Front left/right
System ................................................. 3-way; Bass reflex
Impedance........................................................................ 6 Ω
Woofer ................................................ 1 x 6.5" full range
Tweeter.......................................................................... 1 x 2"
PolydomeTweeter ................................................... 1 x 1"
Dimensions (w x h x d) . 240 x 310 x 290 (mm)
Weight............................................................. 3.95 kg each
Headphones...................................... 32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10%THD)
GENERAL
Material/finish ................................... Polystyrene/Metal
AC Power
CD PLAYER
Number of programmable tracks ......................... 40
Frequency response .......................... 20 – 20000 Hz
Signal-to-noise ratio....................................... ≥ 76 dBA
Channel separation ..........................≥ 79 dB (1 kHz)
Total harmonic distortion............ < 0.02% (1 kHz)
ForVersion /21-21M .. 110 – 127 / 220 – 240V;
....................................................... 50/60 Hz Switchable
ForVersion /30 ....................... 230 – 240V; 50 Hz
Power Consumption
Active ...................................................................... 175 W
Standby ..................................................................... 25 W
Eco Power Standby ........................................... < 1 W
Dimensions (w x h x d) .. 265 x 310 x 390 (mm)
Weight (without speakers) ................................. 9.0 kg
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz)........... 530 – 1700 kHz
Tuning grid ............................................................9/10 kHz
Number of presets ........................................................ 40
Antenna
Specifications and external appearance are
subject to change without notice.
FM ....................................................................... 75 Ω wire
AM.............................................................. Loop antenna
TAPE PLAYER
Frequency response
Normal tape (type I)...... 80 – 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)................................. ≥ 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
26
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the Cabinet
Cleaning the Heads and theTape Paths
To ensure good recording and playback quality,
clean the heads A, the capstan(s) B, and
pressure roller(s) C after every 50 hours of
tape operation.
G
G
G
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
G
Cleaning Discs
G
G
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You also can clean the heads by playing a
cleaning tape once.
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out. Do not wipe in circular
motion.
Do not use solvents such as
benzine, thinner, commercially
available cleaners, or antistatic spray intended for
analogue records.
C
B
A
B
C
Cleaning the disc lens
G
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Demagnetising the heads
Use a demagnetising tape available at your
dealer.
G
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service centre.
Problem
Solution
CD OPERATION
“NO DISC” is displayed.
–
–
–
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
–
–
Replace or clean the disc, see “Maintenance”.
“DISC NOT FINALIZED” is displayed.
Use a finalised CD-R(W) or CD-R.
27
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
RADIO RECEPTION
Radio reception is poor.
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the Mini HiFi
System and yourTV orVCR.
TAPE OPERATION/RECORDING
Recording or playback cannot be made.
–
–
–
Clean deck parts, see “Maintenance”.
Use only NORMAL (IEC I) tape.
Apply a piece of adhesive tape over the missing
tab space.
The tape deck door cannot open.
GENERAL
–
Remove and reconnect the AC power plug and
switch on the system again.
The system does not react when buttons
are pressed.
–
Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor
quality.
–
–
–
–
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
The left and right sound outputs are
reversed.
–
Check the speaker connections and location.
The remote control does not function
properly.
–
–
–
Select the source (CD orTUNER, for example)
before pressing the function button (É,í,ë).
Reduce the distance between the remote control
and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
–
–
Replace the batteries.
Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working.
–
–
–
Set the clock correctly.
PressTIMER ON/OFF to switch on the timer.
If a recording is in progress, stop the recording.
Not all lighted buttons are showing light.
The Clock/Timer setting is erased.
–
–
–
Press DISPLAY to select NORMAL or MODE 1
display mode.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features
Press and hold DEMO STOP Çon the system
automatically and buttons start flashing.
to switch off the demonstration.
28
12/11/01, 5:22 PM 3139 115 21161
pg 001-028/C555/21-Eng
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Philips at the Internet
FW-C555
CLASS 1
LASER PRODUCT
3139 115 21161
SL-0148/21-4
pg Back/C555/21
104
12/11/01, 5:24 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|