Philips Stereo Amplifier BGA2748 User Manual

DISCRETE SEMICONDUCTORS  
DATA SHEET  
book, halfpage  
BGA2748  
MMIC wideband amplifier  
Product specification  
2002 Jul 03  
Supersedes data of 2001 Oct 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
LIMITING VALUES  
In accordance with the Absolute Maximum Rating System (IEC 60134)  
SYMBOL  
VS  
PARAMETER  
DC supply voltage  
CONDITIONS  
RF input AC coupled  
MIN.  
MAX.  
UNIT  
4
V
IS  
supply current  
15  
mA  
mW  
°C  
°C  
dBm  
Ptot  
Tstg  
Tj  
total power dissipation  
storage temperature  
operating junction temperature  
maximum drive power  
Ts 80 °C  
200  
+150  
150  
10  
65  
PD  
THERMAL RESISTANCE  
SYMBOL  
PARAMETER  
CONDITIONS  
VALUE  
300  
UNIT  
Rth j-s  
thermal resistance from junction to solder  
point  
Ptot = 200 mW; Ts 80 °C  
K/W  
CHARACTERISTICS  
VS = 3 V; IS = 5.7 mA; f = 1 GHz; Tj = 25 °C; unless otherwise specified.  
SYMBOL PARAMETER CONDITIONS  
IS supply current  
MIN.  
4.5  
TYP.  
5.7  
MAX.  
UNIT  
8
mA  
|s21|2  
RL IN  
RL OUT  
NF  
insertion power gain  
return losses input  
return losses output  
noise figure  
f = 1 GHz  
f = 2 GHz  
f = 1 GHz  
f = 2 GHz  
f = 1 GHz  
f = 2 GHz  
f = 1 GHz  
f = 2 GHz  
21.8  
18.5  
18  
dB  
dB  
dB  
14  
dB  
7
dB  
8
dB  
1.9  
dB  
2.4  
dB  
BW  
bandwidth  
at |s21|2 3 dB below flat gain at 1 GHz  
f = 1 GHz  
1.9  
GHz  
dBm  
dBm  
dBm  
dBm  
dBm  
dBm  
dBm  
dBm  
PL(sat)  
saturated load power  
2.3  
3.3  
9.2  
10.9  
23.7  
19.9  
1.9  
1.4  
f = 2 GHz  
PL 1 dB  
IP3(in)  
IP3(out)  
load power  
at 1 dB gain compression; f = 1 GHz  
at 1 dB gain compression; f = 2 GHz  
input intercept point  
output intercept point  
f = 1 GHz  
f = 2 GHz  
f = 1 GHz  
f = 2 GHz  
2002 Jul 03  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
APPLICATION INFORMATION  
Figure 2 shows a typical application circuit for the  
BGA2748 MMIC. The device is internally matched to 50 ,  
and therefore does not need any external matching. The  
value of the input and output DC blocking capacitors C2,  
C3 should be not more than 100 pF for applications above  
100 MHz. However, when the device is operated below  
100 MHz, the capacitor value should be increased.  
DC-block  
100 pF  
DC-block  
100 pF  
DC-block  
100 pF  
handbook, halfpage  
input  
output  
MGU437  
The 22 nF supply decoupling capacitor, C1 should be  
located as closely as possible to the MMIC.  
Fig.3 Easy cascading application circuit.  
Separate paths must be used for the ground planes of the  
ground pins GND1, GND2, and these paths must be as  
short as possible. When using vias, use multiple vias per  
pin in order to limit ground path inductance.  
mixer  
handbook, halfpage  
from RF  
circuit  
to IF circuit  
or demodulator  
wideband  
amplifier  
MGU438  
V
handbook, halfpage  
s
oscillator  
C1  
V
s
RF in  
RF out  
RF input  
RF output  
Fig.4 Application as IF amplifier.  
C2  
C3  
GND1  
GND2  
MGU435  
mixer  
handbook, halfpage  
Fig.2 Typical application circuit.  
to IF circuit  
or demodulator  
antenna  
LNA  
wideband  
amplifier  
MGU439  
Figure 3 shows two cascaded MMICs. This configuration  
doubles overall gain while preserving broadband  
characteristics. Supply decoupling and grounding  
conditions for each MMIC are the same as those for the  
circuit of Fig.2.  
oscillator  
Fig.5 Application as RF amplifier.  
The excellent wideband characteristics of the MMIC make  
it and ideal building block in IF amplifier applications such  
as LBNs (see Fig.4).  
As a buffer amplifier between an LNA and a mixer in a  
receiver circuit, the MMIC offers an easy matching, low  
noise solution (see Fig.5).  
mixer  
handbook, halfpage  
from modulation  
or IF circuit  
to power  
amplifier  
wideband  
amplifier  
In Fig.6 the MMIC is used as a driver to the power amplifier  
in part of a transmitter circuit. Good linear performance  
and matched input and output offer quick design solutions  
in such applications.  
MGU440  
oscillator  
Fig.6 Application as driver amplifier.  
2002 Jul 03  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
90°  
1.0  
0.8  
0.6  
0.4  
0.2  
0
+1  
135°  
45°  
+2  
+0.5  
+0.2  
+5  
100 MHz  
0.2  
0.5  
1
2
5
180°  
0
0°  
3 GHz  
5  
0.2  
0.5  
2  
45°  
135°  
1  
MGU465  
1.0  
90°  
IS = 5.66 mA; VS = 3 V; PD = 30 dBm; ZO = 50 Ω.  
Fig.7 Input reflection coefficient (s11); typical values.  
90°  
1.0  
0.8  
0.6  
0.4  
0.2  
0
+1  
135°  
45°  
+2  
+0.5  
+0.2  
+5  
0.2  
0.5  
1
5
100 MHz  
180°  
0
0°  
3 GHz  
5  
0.2  
0.5  
2  
45°  
135°  
1  
MGU466  
1.0  
90°  
IS = 5.66 mA; VS = 3 V; PD = 30 dBm; ZO = 50 Ω.  
Fig.8 Output reflection coefficient (s22); typical values.  
5
2002 Jul 03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
MGU467  
MGU468  
0
30  
handbook, halfpage  
handbook, halfpage  
2
s
2
s
12  
21  
(dBm)  
(dB)  
20  
20  
40  
60  
80  
10  
0
0
0
1000  
2000  
3000  
1000  
2000  
3000  
f (MHz)  
f (MHz)  
IS = 5.66 mA; VS = 3 V; PD = 30 dBm; ZO = 50 Ω.  
IS = 5.66 mA; VS = 3 V; PD = 30 dBm; ZO = 50 Ω.  
Fig.9 Isolation (|s12|2) as a function of frequency;  
typical values.  
Fig.10 Insertion gain (|s21|2) as a function of  
frequency; typical values.  
MGU469  
MGU470  
0
0
handbook, halfpage  
handbook, halfpage  
P
L
(dBm)  
P
L
(dBm)  
10  
10  
20  
20  
30  
50  
30  
50  
40  
30  
20  
10  
P
0
40  
30  
20  
10  
P
0
(dBm)  
(dBm)  
D
D
VS = 3 V; f = 1 GHz; ZO = 50 Ω.  
VS = 3 V; f = 2 GHz; ZO = 50 Ω.  
Fig.11 Load power as a function of drive power at  
1 GHz; typical values.  
Fig.12 Load power as a function of drive power at  
2 GHz; typical values.  
2002 Jul 03  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
MGU471  
MGU472  
5
15  
K
handbook, halfpage  
NF  
(dB)  
4
3
2
1
0
10  
5
0
0
1000  
2000  
3000  
0
1000  
2000  
3000  
f (MHz)  
f (MHz)  
IS = 5.66 mA; VS = 3 V; ZO = 50 Ω.  
IS = 5.66 mA; VS = 3 V; ZO = 50 Ω.  
Fig.13 Noise figure as a function of frequency;  
typical values.  
Fig.14 Stability factor as a function of frequency;  
typical values.  
Table 1 Scattering parameters: IS = 5.66 mA; VS = 3 V; PD = 30 dBm; ZO = 50 ; Tamb = 25 °C  
s11  
s21  
s12  
s22  
f
MAGNITUDE ANGLE MAGNITUDE ANGLE MAGNITUDE ANGLE MAGNITUDE ANGLE  
(MHz)  
(ratio)  
(deg)  
(ratio)  
(deg)  
(ratio)  
(deg)  
(ratio)  
(deg)  
100  
200  
0.08233  
0.08934  
0.10677  
0.12257  
0.12902  
0.12635  
0.11634  
0.11643  
0.12552  
0.15177  
0.18258  
0.20634  
0.22422  
0.22777  
0.21931  
0.22247  
6.058  
1.505  
5.4700  
6.8702  
9.7365  
11.586  
12.372  
12.519  
12.232  
11.550  
10.664  
9.6775  
8.5565  
7.5480  
6.5362  
5.6120  
4.8007  
3.9567  
14.75  
17.10  
0.00049  
0.00078  
0.00164  
0.00168  
0.00233  
0.00363  
0.00551  
0.00659  
0.00779  
0.00871  
0.01025  
0.01124  
0.01078  
0.00884  
0.00548  
0.00384  
92.64  
91.63  
108.6  
119.4  
113.0  
129.6  
140.5  
151.4  
163.4  
176.5  
172.8  
0.32715  
0.32763  
0.33688  
0.36332  
0.39884  
0.44177  
0.47449  
0.48300  
0.46932  
0.43106  
0.37882  
0.31996  
0.26441  
0.22542  
0.18502  
0.12693  
3.589  
2.304  
1.542  
1.800  
3.931  
8.067  
14.54  
21.47  
28.10  
34.03  
38.74  
41.11  
40.43  
37.88  
38.37  
37.56  
400  
1.621  
5.277  
600  
2.565  
8.769  
11.24  
9.574  
1.8040  
14.913  
23.659  
27.689  
29.316  
28.365  
26.661  
28.691  
37.201  
12.73  
31.11  
48.70  
65.32  
81.52  
96.69  
111.1  
124.5  
136.9  
148.4  
158.5  
167.7  
175.6  
800  
1000  
1200  
1400  
1600  
1800  
2000  
2200  
2400  
2600  
2800  
3000  
160.7  
146.8  
131.1  
123.8  
160.7  
2002 Jul 03  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
PACKAGE OUTLINE  
Plastic surface mounted package; 6 leads  
SOT363  
D
B
E
A
X
y
H
v
M
A
E
6
5
4
Q
pin 1  
index  
A
A
1
1
2
3
c
e
1
b
p
L
p
w
M
B
e
detail X  
0
1
2 mm  
scale  
DIMENSIONS (mm are the original dimensions)  
A
1
UNIT  
A
b
c
D
E
e
e
H
L
Q
v
w
y
p
p
1
E
max  
0.30  
0.20  
1.1  
0.8  
0.25  
0.10  
2.2  
1.8  
1.35  
1.15  
2.2  
2.0  
0.45  
0.15  
0.25  
0.15  
mm  
0.1  
1.3  
0.65  
0.2  
0.2  
0.1  
REFERENCES  
JEDEC  
EUROPEAN  
PROJECTION  
OUTLINE  
VERSION  
ISSUE DATE  
IEC  
EIAJ  
97-02-28  
SOT363  
SC-88  
2002 Jul 03  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
DATA SHEET STATUS  
PRODUCT  
DATA SHEET STATUS(1)  
STATUS(2)  
DEFINITIONS  
Objective data  
Development This data sheet contains data from the objective specification for product  
development. Philips Semiconductors reserves the right to change the  
specification in any manner without notice.  
Preliminary data  
Qualification  
This data sheet contains data from the preliminary specification.  
Supplementary data will be published at a later date. Philips  
Semiconductors reserves the right to change the specification without  
notice, in order to improve the design and supply the best possible  
product.  
Product data  
Production  
This data sheet contains data from the product specification. Philips  
Semiconductors reserves the right to make changes at any time in order  
to improve the design, manufacturing and supply. Changes will be  
communicated according to the Customer Product/Process Change  
Notification (CPCN) procedure SNW-SQ-650A.  
Notes  
1. Please consult the most recently issued data sheet before initiating or completing a design.  
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was  
DEFINITIONS  
DISCLAIMERS  
Short-form specification  
The data in a short-form  
Life support applications  
These products are not  
specification is extracted from a full data sheet with the  
same type number and title. For detailed information see  
the relevant data sheet or data handbook.  
designed for use in life support appliances, devices, or  
systems where malfunction of these products can  
reasonably be expected to result in personal injury. Philips  
Semiconductors customers using or selling these products  
for use in such applications do so at their own risk and  
agree to fully indemnify Philips Semiconductors for any  
damages resulting from such application.  
Limiting values definition Limiting values given are in  
accordance with the Absolute Maximum Rating System  
(IEC 60134). Stress above one or more of the limiting  
values may cause permanent damage to the device.  
These are stress ratings only and operation of the device  
at these or at any other conditions above those given in the  
Characteristics sections of the specification is not implied.  
Exposure to limiting values for extended periods may  
affect device reliability.  
Right to make changes  
Philips Semiconductors  
reserves the right to make changes, without notice, in the  
products, including circuits, standard cells, and/or  
software, described or contained herein in order to  
improve design and/or performance. Philips  
Semiconductors assumes no responsibility or liability for  
the use of any of these products, conveys no licence or title  
under any patent, copyright, or mask work right to these  
products, and makes no representations or warranties that  
these products are free from patent, copyright, or mask  
work right infringement, unless otherwise specified.  
Application information  
Applications that are  
described herein for any of these products are for  
illustrative purposes only. Philips Semiconductors make  
no representation or warranty that such applications will be  
suitable for the specified use without further testing or  
modification.  
2002 Jul 03  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
NOTES  
2002 Jul 03  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors  
Product specification  
MMIC wideband amplifier  
BGA2748  
NOTES  
2002 Jul 03  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Semiconductors – a worldwide company  
Contact information  
For additional information please visit http://www.semiconductors.philips.com.  
Fax: +31 40 27 24825  
For sales offices addresses send e-mail to: [email protected].  
© Koninklijke Philips Electronics N.V. 2002  
SCA74  
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.  
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed  
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license  
under patent- or other industrial or intellectual property rights.  
Printed in The Netherlands  
613516/03/pp12  
Date of release: 2002 Jul 03  
Document order number: 9397 750 10018  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Musical Instrument Amplifier KB 100 User Manual
Pelco TV Mount PDF8 Series User Manual
Philips Cassette Player DAT850 User Manual
Philips Speaker System FB 201 User Manual
Philips Surge Protector SPP5126A User Manual
Pitco Frialator Pasta Maker and RSE14 User Manual
Polaroid Portable DVD Player PDM 8551 User Manual
Polycom Telephone IP 300 SIP User Manual
Poulan Snow Blower 415242 User Manual
ProForm Treadmill 831293061 User Manual