Philips Speaker AS351 User Manual

Register your product and get support at  
AS351  
User manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remove batteries when the unit is not  
used for a long time.  
1 Important  
Apparatus shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on the  
apparatus (e.g. liquid filled objects, lighted  
candles).  
Where the plug of the Direct Plugin  
Adapter is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Safety  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Install in accordance with the  
Warning  
Never remove the casing of this apparatus.  
Never lubricate any part of this apparatus.  
Never place this apparatus on other electrical  
equipment.  
manufacturer's instructions.  
Do not install near any heat sources such  
as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that  
produce heat.  
Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
Only use attachments/accessories specified  
by the manufacturer.  
Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
Battery usage CAUTION To prevent  
battery leakage which may result in bodily  
injury, property damage, or damage to the  
unit:  
Install all batteries correctly, + and - as  
marked on the unit.  
Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
2
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Your Docking  
Speaker for  
Android™  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
Introduction  
With this docking speaker, you can:  
enjoy audio from your Bluetooth-enabled  
portable device or an external device;  
charge your phone; and  
experience various features brought by  
Philips Philips DockStudio and Philips  
Songbird app.  
What's in the box  
Check and identify the contents of your  
package:  
Main unit  
Power adapter  
Dock extension  
Quick start guide  
Safety sheet  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview of the main unit  
e
f
a
b
c
d
g
h
f +/-  
a
Adjust volume.  
Activate or deactivate Bluetooth  
function.  
g Power supply socket  
b
c
h Battery compartment  
Bluetooth indicator.  
Charge your phone through USB cable.  
d AUX IN  
Connect an external audio device.  
e Dock for Android-powered device  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Get started  
Always follow the instructions in this chapter in  
sequence.  
Power supply  
Either AC power or batteries can be used as  
power supply of this speaker.  
Note  
Option 1:AC power  
Batteries contain chemical substances, so they should  
be disposed of properly.  
Caution  
Risk of product damage! Ensure that the power voltage  
corresponds to the voltage printed on the back or  
underside of the unit.  
Risk of electric shock! When you unplug the AC  
adapter, always pull the plug from the socket. Never  
pull the cord.  
Turn on  
Press .  
» The Bluetooth indicator begins to  
Connect the power adapter to the wall outlet.  
blink.  
Switch to standby mode  
Press again to switch the docking speaker to  
standby mode.  
» The Bluetooth indicator turns off.  
Option 2: Battery power  
Caution  
Risk of explosion! Keep batteries away from heat,  
sunshine, or fire. Never discard batteries in fire.  
1 Open the battery compartment.  
2 Insert 4 AA batteries with correct polarity  
(+/-) as indicated.  
3 Close the battery compartment.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
4 Play and charge  
Before you connect a Bluetooth device to this docking  
speaker, familiarize yourself with the Bluetooth  
capabilities of the device.  
Keep this docking speaker away from other electronic  
devices that may cause interference.  
With this docking speaker, you can enjoy audio  
in two ways:  
through manual Bluetooth connection;  
through automatic Bluetooth connection  
with Philips DockStudio app.  
1 On your docking speaker, press to  
activate Bluetooth.  
» The Bluetooth indicator blinks on the  
display panel.  
Compatible with Android™  
2 Turn on Bluetooth function of your  
To make full use of your docking speaker, your  
Android-powered device should satisfy the  
following requirements:  
portable device.  
Different devices may have different  
way to activate Bluetooth.  
With Android operation system (Version  
2.1 or above);  
With Bluetooth software (Version 2.1 or  
above); and  
With a micro USB connector.  
For other devices with micro USB connector  
and Bluetooth function, you can still use the  
docking speaker to do the following:  
Charge your device through the USB  
connector or USB socket;  
Enjoy audio through Bluetooth.  
Tip  
3 Scan Bluetooth devices that can pair with  
Play audio through manual  
Bluetooth connection  
your portable device.  
The docking speaker uses Bluetooth wireless  
technology to stream music from your portable  
device to the system.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
» The audio comes out through the  
4 When [PHILIPS AS351] is displayed on  
your device, select it to start connection.  
» If connection is successful, you will hear  
double beep confirmation and find a  
different Bluetooth icon on the top of  
the screen.  
docking speaker.  
Tip  
The effective operation range between the docking  
speaker and the paired device is approximately 10  
meters (30 feet).  
Any obstacle between the speaker and the device can  
reduce the operational range.  
Play audio through auto  
Bluetooth connection with  
Philips DockStudio  
Philips DockStudio app brings a suite of new  
features to your docking speaker, including  
automatic Bluetooth connection, Songbird  
music player, Internet radio and a multi-function  
alarm clock.To enjoy more features, you are  
recommended to download and install the free  
app.  
5 Play audio with the media player of your  
portable device.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Follow the on-screen instructions to install  
Install DockStudio app onto Android-  
powered device  
Philips DockStudio app.  
You have two ways to install Philips  
DockStudio on your Android-powered device.  
Install DockStudio app through QR code  
Note  
Make sure that your Android-powered device is  
connected to the Internet.  
Make sure that your device has a barcode scanner such  
as "QR Droid". If not, download one from the Android  
market.  
The Philips DockStudio app brings a suite of  
cool, new features to your Philips DockStudio  
docking speaker, including automatic Bluetooth  
connection, Songbird music player,  
1 Use the barcode scanner to scan the QR  
code on the package or Quick Start Guide.  
worldwide Internet radio, sound settings  
3 When installation is complete, tap [Done]  
(done).  
DockStudio  
» The DockStudio icon appears on your  
portable device.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Tap the "Android Market" icon on your  
device.  
DockStudio  
Install DockStudio app through Android  
Market  
You can also search Philips DockStudio from  
Android Market directly, and then install the app.  
2 Tap the search icon on the screen.  
Note  
Make sure that your Android-powered device is  
connected to the internet.  
Make sure that Android Market is available on your  
Android-powered device.  
3 In the search bar, type in "Philips  
DockStudio" to search the app.  
4
From the search result list, find and tap  
Philips DockStudio to start downloading.  
5 Follow the on-screen instructions to install  
the DockStudio app.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Activate Bluetooth with DockStudio  
app  
Philips DockStudio app helps to connect your  
Android-powered device and docking speaker  
through Bluetooth automatically.  
Note  
Make sure that your Android-powered device is  
connected to the Internet.  
First-time launch  
The Philips DockStudio app brings a suite of  
cool, new features to your Philips DockStudio  
docking speaker, including automatic Bluetooth  
connection, Songbird music player,  
1 On your docking speaker, press to  
activate Bluetooth.  
»
blinks on the display panel.  
worldwide Internet radio, sound settings  
2 On the home screen of your device, tap  
the DockStudio icon to launch the app.  
6 When installation is complete, tap [Done]  
(done).  
DockStudio  
DockStudio  
» A prompt message asking you to  
download Songbird appears.  
3 Tap [Cancel] (cancel).  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
» The device starts to scan Philips  
devices that can be paired  
automatically.  
» After Bluetooth connection, a different  
Bluetooth icon can be found on the  
top of the screen.  
5 Play audio with the media player of your  
4 When [PHILIPS AS351] is displayed on  
your device, select it to start connection.  
» It may take a few seconds to complete  
the connection.  
portable device.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
» The audio comes out through the  
docking speaker.  
Next-time launch  
3 Tap [Speaker Connection] (Speaker  
Connection) to activate automatic  
Bluetooth connection.  
Next time you launch the DockStudio app,  
connect to the docking speaker through  
Bluetooth as below.  
1 Activate the Bluetooth function of your  
docking speaker.  
2 Launch Philips DockStudio to access its  
menu.  
» It may take a few seconds to complete  
the connection.  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Play audio on your portable device.  
» The audio comes out through the  
docking speaker.  
3 Adjust the bumpers on both sides of the  
connector to stabilize the phone.  
Dock and charge Android-  
powered phone  
Dock Android-powered device  
To charge your Android-powered phone, you  
need to dock it in the docking speaker first.  
1 Check the orientation of the micro USB  
connector on your Android-powered  
phone. If your USB connector has a cover,  
flip it outwards.  
2 If necessary, rotate the USB connector on  
the docking speaker, and then place your  
Android-powered phone onto the dock.  
4 Slide the connector to place your phone in  
the middle of the docking speaker.  
Tip  
If the micro USB connector is located at the top, and  
your are using Android system of version 2.3 or above,  
screen auto-rotation is available.  
Use dock extension  
If the USB connector on your phone is close  
to the edge, the supplied dock extension can  
balance the docked phone, as illustrated.  
1 Adjust the slide knobs to make both  
bumpers at the lowest position.  
2 Place the dock extension onto the dock.  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Dock your phone.  
Dock extension  
DockStudio  
Charge Android-powered phone  
When the docking speaker is connected to  
power, the docked phone starts charging  
automatically.  
Tip  
» The DockStudio menu is displayed.  
This function is also available for non Android-powered  
device that has a micro USB connector.  
Play audio with Philips  
Songbird  
Philips Songbird is a simple, easy-to-use PC  
program and Android app. It lets you discover,  
play and sync your media from PC to your  
Android-powered devices seamlessly.  
Install Songbird on Android-powered  
device  
1 Tap the DockStudio icon on your Android-  
powered device.  
2 Tap [Songbird].  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
» You are requested to download  
5 Select a track, and then tap to play music.  
Songbird.  
3 Follow the on-screen instructions to  
download the app.  
4 After installation, tap [Open] (Open) to  
access Songbird menu.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
» If it is the first time you connect the  
device to Philips Songbird, a pop-up  
screen appears. Select auto sync as  
prompted.  
Install Songbird on PC  
» The device synchronizes with Philips  
2 Search Songbird.  
Songbird automatically.  
If you didn't select auto sync, you can sync with  
Songbird manually.  
songbird  
1 Select the device under Devices.  
3 Download the latest Songbird application.  
4 Follow on-screen instructions to install  
Philips Songbird on your PC.  
Sync with PC through Philips Songbird  
Note  
Make sure that you have turned on the USB storage.  
2 Select Manual or Auto.  
1 On your PC, launch Philips Songbird.  
2 Connect your Android-powered device to  
PC with a USB cable.Wait until the device  
is recognized by the Songbird.  
3 Click Sync.  
»
If you have selected auto sync, auto  
sync starts automatically when you  
connect the device to the PC.  
» On Philips Songbird, the device is  
displayed when it is recognized by the  
PC.  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Other features  
Use more features with  
DockStudio  
With Philips DockStudio, you can also listen to  
Internet radio, set alarm timer and sleep timer.  
Note  
Make sure that your portable device is connected to  
the Internet.  
5 Select a radio station from the search  
result list.  
» The radio station begins to broadcast.  
Listen to Internet radio  
1 Connect your Android-powered device  
Set sleep timer  
and the docking system through Bluetooth.  
1 Launch Philips DockStudio.  
2 Open Philips DockStudio to go to the  
main menu.  
3 Tap [Radio] (Radio) on the screen.  
2 Tap the icon to access the sleep timer  
menu.  
4 Search a radio station in the search bar.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Launch the app.  
3 Select a time period for the sleep timer,  
2 Tap the icon to access clock setting  
and then tap [Start] (Start).  
menu.  
3 Tap [Alarm settings] (Alarm settings).  
Note  
This function only works with Philips Songbird.  
Set alarm timer  
With Philips DockStudio, you can set multiple  
alarms and know the latest weather. It even  
alerts you when weather conditions are suitable  
for your favorite outdoors activity.  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Tap to access alarm setting menu.  
Note  
From the [Lifestyle] (Lifestyle) tab, you can select your  
preferred sport and weather (excellent, good, or fair).  
The alarm will not ring if the weather is not good  
enough.  
Charge your phone through  
the USB socket  
Connect a USB cable (not supplied) to:  
the  
socket at the back of the speaker.  
the USB socket on your phone.  
Note  
5 Set the alarm, and tap [Save] (Save) on the  
top right of the screen.  
It is not guaranteed that all USB cables work with this  
speaker.  
» The new alarm is saved and displayed  
on the screen.  
Play audio from an external  
device  
You can listen to audio from an external device  
through this speaker.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Connect an MP3 link cable (not supplied)  
to:  
the AUX IN socket.  
the headphone socket of an external  
device.  
2 Play audio on the external device (see the  
device's user manual).  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Product  
information  
Note  
Product information is subject to change without prior  
notice.  
Specifications  
AC Power  
OH-1028A0903000U-  
VDE/-UK/-SAA/-CCC/-IR/-  
UL (Philips);  
OH-1028A0903000U  
(Philips).  
Input: 100-240V~, 50/60Hz,  
800mA;  
MAX Output: 9V 3A  
Operation Power < 35W  
Consumption  
Eco Standby Power < 1W  
Consumption  
Dimensions - Main 270 5 X 88 5 X 141 5 mm  
Unit (W x H x D)  
Weight - Main Unit 0.885 kg  
Charging:  
- through micro  
USB connector  
- through  
2A  
2A  
socket  
- through micro  
USB connector and  
socket  
1A for each  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Troubleshooting  
Warning  
Never remove the casing of this device.  
To keep the warranty valid, never try to repair  
the system yourself.  
If you encounter problems when using this  
device, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page (www.  
philips.com/support).When you contact Philips,  
make sure that the device is nearby and the  
model number and serial number are available.  
No power  
Make sure that the AC power adaptor of  
the device is connected properly.  
Make sure that there is power at the AC  
outlet.  
Make sure that the batteries are inserted  
correctly.  
If the speaker is powered by the batteries,  
make sure that the adapter is not  
connected to the device.  
No sound or poor sound  
Adjust the volume of the docking system.  
Adjust the volume of your phone.  
No response from the unit  
Disconnect and reconnect the AC power  
plug, then turn on the unit again.  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Environmental information  
8 Notice  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
This product complies with the radio  
interference requirements of the European  
Community.  
Note  
The type plate is located on the bottom of the  
apparatus.  
Recycling  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products.The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications are subject to change without notice  
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
AS351_12_CCR_V2.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Musical Instrument S 24 User Manual
Philips Answering Machine CD455C User Manual
Philips Battery Charger SCE7640 User Manual
Philips Cordless Telephone 6523 User Manual
Philips Stereo Amplifier TDA2613 User Manual
Pioneer DVD Recorder DVR 541H S User Manual
Planet Technology Network Card VIP 156PE User Manual
ProForm Treadmill 485CX User Manual
ProForm Treadmill PFTL788072 User Manual
Psion Teklogix Personal Computer PX750 User Manual