Network Card for Ethernet
KX-PNBC8 User’s Guide
Model No.
KX-PNBC8
• This guide provides various information about connecting your printer to a network and
setting up the KX-PNBC8.
Please refer to this guide for further details that may not be included in the Quick
Installation Guide.
• Keep KX-PNBC8 CD-ROM in the protective case.
Do not expose the CD-ROM to direct sunlight or extreme heat and do not scratch or
smudge the surface of the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 1
Introduction
1.1 What's in Your Package ........................................................................... 8
1.2 Hardware/NOS Requirements ................................................................. 9
Chapter 2
Installing the Network Card
2.1 Important Note ....................................................................................... 10
2.1.2 Print Server Name of the Network Card ................................................... 10
2.2 Network Card Installation ....................................................................... 11
Chapter 3
Before Starting the Setup
3.1 Selecting the Print Data Transfer Method .............................................. 14
3.1.2 When Printing via the Server Computer ................................................... 15
Chapter 4
Printing Directly from a Computer
(Windows 95/Windows 98/Windows NT 4.0)
4.1 IP Peer-to-Peer Printing ......................................................................... 16
4.1.1 Step 1:Setting Up the TCP/IP Protocol on a Computer ............................ 16
4.1.2 Step 2:Setting Up the TCP/IP Protocol in the Network Card .................... 18
4.1.3 Step 3:Installing and Setting Up the IP Peer-to-Peer
Windows Redirector ................................................................................ 23
4.1.4 Step 4:Setting Up the Printer Driver and the Printer Port ......................... 31
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 IPX Peer-to-Peer Printing ...................................................................... 39
4.2.1 Step 1:Setting Up the IPX/SPX Protocol on a Computer ......................... 39
4.2.2 Step 2:Installing and Setting Up the IPX Peer-to-Peer
Windows Redirector ................................................................................ 39
4.2.3 Step 3:Setting Up the Printer Driver and the Printer Port ......................... 44
4.3 LPR Printing ........................................................................................... 47
4.3.1 For Windows 95/Windows 98 ................................................................... 47
4.3.2 For Windows NT 4.0 ................................................................................. 49
Chapter 5
Printing via the Server Computer
(Windows 95/Windows 98/Windows NT 4.0)
5.1 IP Peer-to-Peer Printing ......................................................................... 52
5.1.1 Step 5:Sharing the Printer Port on the Server Computer ......................... 53
5.1.2 Step 6:Setting Up the Printer Driver and the Printer Port
on the Client Computer ............................................................................ 57
5.2 IPX Peer-to-Peer Printing ...................................................................... 69
5.2.1 Step 4:Sharing the Printer Port on the Server Computer ......................... 69
5.2.2 Step 5:Setting Up the Printer Driver and the Printer Port
on the Client Computer ............................................................................ 72
5.3 LPR Printing ........................................................................................... 79
Chapter 6
Using the Management Access Program or a
Standard Web Browser
6.1 Where to Place the MAP Utility .............................................................. 80
6.2 How to Install MAP in Windows ............................................................. 81
6.3 Using the MAP Program ........................................................................ 81
6.4 Web IP Browser ..................................................................................... 81
6.5 Dynamic Host Configuration Protocol .................................................... 82
4
Download from Www.Somanuals.com. All Manuals Search And Download.
6.6.1 Using WINS with your Print Server .......................................................... 83
6.6.2 Configuring for the WINS Server .............................................................. 83
Chapter 7
NetWare Configuration
7.1 Configuring NetWare 3.x ....................................................................... 86
7.1.1 Start PCONSOLE and Select File Server ................................................ 86
7.1.2 Create Print Queues ................................................................................. 87
7.1.3 Enter the Print Server Name .................................................................... 87
7.1.4 Configure the Print Server ........................................................................ 89
7.1.5 Assign Print Queues to the Printer ........................................................... 90
7.1.6 Set Up Notify Options for the Printer ........................................................ 91
7.1.7 Installing the Print Server on Multiple File Servers ................................... 92
7.1.8 Primary File Server ................................................................................... 92
7.1.9 Preferred File Servers .............................................................................. 93
7.2 Configuring NetWare 4.x ....................................................................... 94
7.2.1 Confirm Bindery Context .......................................................................... 94
7.2.2 Configure in Bindery Mode with PCONSOLE .......................................... 95
7.3 Configuring NetWare 5 .......................................................................... 97
7.3.1 When using IPS/SPX protocol .................................................................. 97
7.3.2 When using TCP/IP protocol .................................................................... 97
7.3.3 NDPS Method (Using PServer Method) ................................................... 98
7.3.4 NDPS Method (Using UNIX Method) ..................................................... 109
7.4 Configuring the Network Card in NetWare Directory
Services .............................................................................................. 112
7.4.1 Create Printer Object .............................................................................. 113
7.4.2 Create Print Server Object ..................................................................... 114
7.4.3 Create Print Queue Object ..................................................................... 115
7.4.4 Assign Printer Object .............................................................................. 117
7.4.5 Assign Print Server Object ..................................................................... 119
7.4.6 Check Assignments ................................................................................ 120
7.4.7 Set Up and Reset the Printer ................................................................. 120
7.5 Network Card Configuration ................................................................ 121
5
Download from Www.Somanuals.com. All Manuals Search And Download.
7.6 Using the Novell PCONSOLE Utility .................................................... 124
7.6.1 Changing the File Server ........................................................................ 124
7.6.2 Changing Print Queues .......................................................................... 125
7.6.3 How to Set Up Notify (NetWare 3.x Bindery mode only) ........................ 126
Chapter 8
Operation and Troubleshooting
8.1 LED Status Indicator ............................................................................ 127
8.2 Status Page ......................................................................................... 129
8.3 Resetting the Print Server to Factory Default ...................................... 131
8.4 How to Diagnose Problems ................................................................. 132
8.5 Troubleshooting Checklists for the NetWare Protocol ......................... 133
Appendix A
Jumper Settings
A.1 Network Card and Jumper Locations .................................................. 137
A.2 Reset to Factory .................................................................................. 137
Appendix B
Specifications
B.1 Network Card ....................................................................................... 138
B.2 Network Cable ..................................................................................... 138
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Introduction
The KX-PNBC8 provides Ethernet connectivity for the KX-P8415 laser printer, by
functioning as a network print server.
The KX-PNBC8 has the following features:
• Automatic selection of 100BaseTX Fast Ethernet connection or 10BaseT Ethernet
connection.
*1
*2
• Peer-to-Peer (serverless) printing from Windows® 95 /Windows 98 or Windows
*3
NT® 4.0 workstations, without a Novell file server present and without using IP.
• Novell NetWare PSERVER on both bindery based and Novell Directory Services
(NDS).
*4
• lpr/lpd over TCP/IP for Microsoft® Windows .
• IP and IPX SNMP support of MIB-2 and Network Interface Card (NIC) MIB.
• SNMP support of standard MIB and proprietary printer MIBs on compatible printers.
• Integral HTTP Server to allow monitoring and management of your Network Card
from a standard IP Web Browser program.
• Management Access Program (MAP) to allow Windows-based HTML viewing for
monitoring and management of your Network Card.
*1
*2
*3
Microsoft® Windows® 95 operating system (hereafter Windows 95)
Microsoft® Windows® 98 operating system (hereafter Windows 98)
Microsoft® Windows NT® Workstation operating system and Microsoft® Windows NT®
Server network operating system Version 4.0 (hereafter Windows NT 4.0)
*4
Microsoft® Windows® operating system (hereafter Windows)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 What's inYour Package
Make sure that the following items are included. Report damage or shortages to the
reseller from where the Network Card was purchased.
❑ Network Card
❑ Quick Installation
Guide
❑ KX-PNBC8 CD-ROM
❑The following items are stored on the KX-PNBC8 CD-ROM
• This Guide
• Management Access Program (MAP)
• IP Peer-to-Peer Windows Redirector
• IPX Peer-to-Peer Windows Redirector
Important: Save the original carton and packing materials for future shipping and
transporting of the Network Card.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Hardware/NOS Requirements
The Network Card hardware and software require the following:
Version of Protocol or
NOS
Novell NetWare Version 3.x, or 4.x, or 5.
Windows or LAN Server systems supporting lpr over TCP/IP.
Software
Novell NetWare printing requires NetWare Capture, NPRINT and
PCONSOLE (later than 1.0) utilities.
The IP Peer-to-Peer utility requires Windows 95/Windows 98/
Windows NT 4.0.
The IPX Peer-to-Peer utility requires Windows 95/Windows 98/
Windows NT 4.0.
The MAP utility requires Windows 95/Windows 98/Windows NT
4.0. MAP also requires a browser such as Microsoft Internet
Explorer or Netscape.
Monitoring and maintenance with HTTP requires a suitable
internet Web Browser program supporting HTML.
Hardware
Support for 10 megabit Ethernet networks: 10BaseT (shielded
twisted pair) cable and hardware.
Support for 100 megabit Ethernet networks: 100BaseTX (shielded
twisted pair) cable and hardware.
CD-ROM drive on the workstation to accept Windows utility.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installing the Network Card
2.1 Important Note
2.1.1 MAC ADDRESS and Serial Number
Each Network Card has a unique address number called MAC ADDRESS and a serial
number. Be sure to record these number for reference.
Serial number
xxxxxx (x: a digit)
MAC ADDRESS
xxxxxxxxxxxx (x: a letter or a digit)
MAC ADDRESS may be used in LPR Printing.
Serial number will be used for print server name.
2.1.2 Print Server Name of the Network Card
If you are required to enter the print server name of the Network Card, be sure to use
the name shown below.
KXP_xxxxxx (xxxxxx is the serial number of the Network Card.)
For example, if the serial number is 995319,the print server name will be
KXP_995319.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Network Card Installation
Important: Before installing the Network Card you should discharge any static electricity
by touching any exposed metal surface on the printer, while the printer is
still plugged into a grounded AC outlet.
To prevent damage, be sure to turn OFF the printer when installing/
uninstalling the Network Card.
Do not touch any electrical components on the surface of the board to avoid
static electricity.
Perform the following steps to install the Network Card.
1. Turn OFF the printer.
2. Remove the two screws and the Ethernet cover.
Important: Keep these screws safe, they are used to secure the Network Card.
Keep the Ethernet cover for future storage of the Network Card.
Ethernet cover
Screws
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Fully insert the Network Card into the printer along the grooves.
Important: Do not connect the network cable until step 4 is completed.
Groove
Network Card
4. Insert the two screws removed in step 2 into the screw holes of the
Network Card, tighten the screws to secure the Network Card.
Screws
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connect the network cable to the Network Card’s RJ-45 port.
RJ-45 port
Network cable
Important: For 10BaseT use Category 3, 4 or 5 shielded cable.
For 100BaseTX use Category 5 shielded cable.
6. Turn ON the printer.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Before Starting the Setup
3.1 Selecting the Print Data Transfer Method
There are two ways of printing via the network.You may need to contact your network
administrator to select the best method:
• Print directly from a computer
• Print via the server computer
3.1.1 When Printing Directly from a Computer
The print data sent from the computer is transferred directly to the Network Card and
printed.This method is recommended when sharing the printer with a small number of
users because it can take advantage of faster printing with less network traffic.
This Network Card has three methods of printing directly from a computer. Select the
method that best suits your need and proceed to the appropriate section.
[1] IP Peer-to-Peer printing using IP protocol
(Windows 95/Windows 98/Windows NT 4.0).............................................. page 16
[2] LPR printing using IP protocol
(Windows 95/Windows 98/Windows NT 4.0) ............................................. page 47
[3] IPX Peer-to-Peer printing using IPX protocol
(Windows 95/ Windows 98)......................................................................... page 39
Note: The following methods are recommended depending on the currently used
network protocol.
- When using TCP/IP protocol .......................................................Method [1] or [2]
- When using IPX/SPX protocol.....................................................Method [3]
- When using neither TCP/IP nor IPX/SPX protocol, method [3] is recommended
(The IPX/SPX protocol must be installed).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.2 When Printing via the Server Computer
Your print data is sent to a print server (the shared computer), then is sent from the
print server (the shared computer) to the printer. This method is recommended for
larger networks because it lets the print server manage the flow of print data.
This Network Card has four methods of printing via the server computer. Select the
method that best suits your need and proceed to the appropriate section.
[1] IP Peer-to-Peer printing using IP protocol
(Windows 95/Windows 98/Windows NT 4.0).............................................. page 52
[2] LPR printing using IP protocol
(Windows 95/Windows 98/Windows NT 4.0) ............................................. page 79
[3] IPX Peer-to-Peer printing using IPX protocol
(Windows 95/ Windows 98).......................................................................... page 69
[4] Printing using NetWare 3.X or NetWare 4.X or NetWare 5
as a server computer ................................................................................. page 85
Note: If you are using Windows 95/Windows 98 or Windows NT 4.0, the following
methods are recommended depending on the currently used network protocol.
- When using TCP/IP protocol .......................................................Method [1] or [2]
- When using IPX/SPX protocol.....................................................Method [3]
- When using neither TCP/IP nor IPX/SPX protocol, method [3] is recommended
(The IPX/SPX protocol must be installed).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Printing Directly from a Computer
(Windows 95/Windows 98/Windows NT 4.0)
There are IP Peer-to-Peer printing, IPX Peer-to-Peer printing and LPR printing as a
method to print directly from a computer.
4.1 IP Peer-to-Peer Printing
The following steps describe how to set up direct printing from a computer (Windows
95/ Windows 98/ Windows NT 4.0) using IP Peer-to-Peer printing.
Step 1: Setting up the TCP/IP protocol on a computer
Step 2: Setting up the TCP/IP protocol in the Network Card
Step 3: Installing and setting up the IP Peer-to-Peer Windows redirector
Step 4: Setting up the printer driver and the printer port
4.1.1 Step 1:Setting Up the TCP/IP Protocol on a Computer
To use IP Peer-to-Peer printing, the TCP/IP protocol must be installed and set up on
the computer before using IP Peer-to-Peer printing.
If TCP/IP is used on a computer already, proceed to section 4.1.2 on page 18.
If not, you will need to install the TCP/IP protocol for the operating system on the
computer. Refer to Windows Help for further details. The IP Address, Subnet Mask
and the Gateway must be assigned when installing it. Set them using one of the
following two ways.You may need to contact your network administrator to select the
best method. (detail on next page)
• Set from the DHCP server
• Set by direct entering
16
Download from Www.Somanuals.com. All Manuals Search And Download.
When Setting from the DHCP Server
If the administrator manages the network at the DHCP server, each address is
automatically assigned from the DHCP server. Proceed to When Setting from the
DHCP Server in Step 1 on page 18.
When Setting by Direct Entering
If the administrator manages the IP address, contact your network administrator to
confirm the values before the setup. If not, set the unique value that is not used for any
other device on the network by referring to the example shown below. After setting up
the IP address, proceed to When Setting by Direct Entering in Step 1 on page 19.
Example: How to assign the IP address, Subnet Mask and Default Gateway values.
IP Address:
10.x.x.x (For x, you can choose any number from 0 - 255 except
0.x.x.x and 255.255.255.255)
Be sure that the IP address is not already assigned to any other
device.
Subnet Mask: 255.000.000.000
It is the same value with all devices.
Not required.
Gateway:
Note: It is recommended to select “IPX Peer-to -Peer printing using IPX protocol” if you
have trouble setting up the IP address values. Its settings are comparatively easy.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.2 Step 2:Setting Up the TCP/IP Protocol in the Network
Card
The IP address, Subnet Mask and Default Gateway are required to be set for the
Network Card. If the TCP/IP protocol settings on the computer are set from the DHCP
server, proceed to When Setting from the DHCP Server in Step 1 on page 18. If it is
done by entering directly, proceed to When Setting by Direct Entering in Step 1 on
page 19.
When Setting from the DHCP Server in Step 1
This Network Card supports DHCP server and automatically assigns the IP address
from the DHCP server by default. Proceed to section 4.1.3 on page 23.
To confirm the assigned addresses, turn the printer OFF and ON again.Those can be
viewed by printing out the KX-P8415 Configuration Page. Instructions on how to print
the Configuration Page, refer to the “KX-P8415 Setup Guide and Reference Guide”.
Note: By default, once an IP address has been set, it will be kept and used for the next
time you use the printer. If you want to assign the IP address every time, WINS
server will be required. If you wish to change the settings, refer to section 6.5 on
page 82.
Note: The IP address assigned from the DHCP server has either limited or unlimited
extension of the lease before the expiration.
If you changed the settings to assign the IP address every time, the lease term is
terminated when you turn off the printer even if your IP address has the unlimited
lease term. If you want to keep the IP address permanently, refer to section 6.5 on
page 82.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
When Setting by Direct Entering in Step 1
If the administrator manages the IP address, contact your network administrator to
confirm the values of the IP address. If not, set the unique value that is not used for
any other device on the network by referring to When Setting by Direct Entering on
page 17.
The value can be set using the printer LCD panel.
1. Press the MENU/EXIT button.
The printer enters the Menu mode and “Test Page” is displayed.
Menu Mode
Test Page
2. Press the
button twice (or press the
button 5 times).
“Network Protocol setup” is displayed.
Menu Mode
Network Protocol setup
3. Press the ENTER button.
“DHCP” is displayed.
Network Protocol setup
DHCP
4. Press the ENTER button.
The printer enters the DHCP Setting mode.
DHCP
Enable*
5. Press the
button (or the
button).
“Disable” is displayed.
DHCP
Disable
6. Press the ENTER button.
“Ethernet IP Address” is displayed.
Network Protocol setup
Ethernet IP Address
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press the ENTER button.
The printer enters the IP Address Input mode.
Ethernet IP Address
xxx.xxx.xxx.xxx*
8. Enter the IP Address.
- Pressing the
button once will increase the value by one.
(If you keep pressing the button, the value will continue to
increase by ten.)
- Pressing the
button once will decrease the value by one.
(If you keep pressing the button, the value will continue to
decrease by ten.)
Ethernet IP Address
xxx.xxx.xxx.xxx
9. Press the ENTER button.
The cursor moves to the next 3-digit value.
Ethernet IP Address
xxx.xxx.xxx.xxx
10.Repeat steps 8 and 9 to finish entering all the 3-digit values of the IP
Address.
A message to confirm the IP Address is displayed.
xxx.xxx.xxx.xxx OK?
Yes
11.Press the ENTER button.
“Ethernet Subnet Mask” is displayed.
Network Protocol setup
Ethernet Subnet Mask
12.Press the ENTER button.
The printer enters the Subnet Mask Input mode.
Ethernet Subnet Mask
xxx.xxx.xxx.xxx*
20
Download from Www.Somanuals.com. All Manuals Search And Download.
13.Enter the Subnet Mask.
- Pressing the
- Pressing the
button once will increase the value by one.
button once will decrease the value by one.
Ethernet Subnet Mask
xxx.xxx.xxx.xxx
14.Press the ENTER button.
The cursor moves to the next 3-digit value.
Ethernet Subnet Mask
xxx.xxx.xxx.xxx
15.Repeat steps 13 and 14 to finish entering all the 3-digit values of the
Subnet Mask.
A message to confirm the Subnet Mask is displayed.
xxx.xxx.xxx.xxx OK?
Yes
16.Press the ENTER button.
“Gateway Address” is displayed.
Network Protocol setup
Gateway Address
17.Press the ENTER button.
The printer enters the Gateway Address Input mode.
Gateway Address
xxx.xxx.xxx.xxx*
18.Enter the Gateway Address.
- Pressing the
- Pressing the
button once will increase the value by one.
button once will decrease the value by one.
Gateway Address
xxx.xxx.xxx.xxx
19.Press the ENTER button.
The cursor moves to the next 3-digit value.
Gateway Address
xxx.xxx.xxx.xxx
21
Download from Www.Somanuals.com. All Manuals Search And Download.
20.Repeat steps 18 and 19 to finish entering all the 3-digit values of the
Gateway Address.
A message to confirm the Gateway Address is displayed.
xxx.xxx.xxx.xxx OK?
Yes
21.Press the ENTER button.
The printer restarts the system automatically, and “Initializing” is
displayed.
Initializing
22.After approximately 3 minutes, you may check your settings.
(1)On your computer, click Start, select Programs, then click
- MS-DOS Prompt.(for Windows 95/Windows 98)
- Command Prompt.(for Windows NT 4.0)
(2)From the DOS prompt type “ping” followed by a space then the
printer’s IP Address, then press the ENTER key.
For example, ping 179.40.0.5.
If the following notation is displayed, they are set correctly.
Pinging 179.40.0.5 with 32 bytes of data:
Reply from 179.40.0.5: bytes=xx time<xxms TTL=xx
Reply from 179.40.0.5: bytes=xx time<xxms TTL=xx
................................................
If the ping command returns a “Request timed out” message or “Reply from
xxx.xxx.xxx.xxx: Destination host unreachable” message or other error
messages you should recheck your settings. If they are not set correctly, you should
go back to Chapter 2 on page 10.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.3 Step 3:Installing and Setting Up the IP Peer-to-Peer
Windows Redirector
Windows IP Peer-to-Peer printing allows Windows 95/Windows 98 workstations and
Windows NT 4.0 workstations and servers to print to Network Card printers without an
intervening server and without using IPX. The main features of the Windows IP Peer-
to-Peer printing are as follows:
• Runs on Windows 95/Widows 98 workstations and on Windows NT 4.0 workstations
or servers “out of the box”.
• Implements IP Peer-to-Peer bi-directional printing between Windows workstations
and Network Card printers.
Introduction and Preparation
The Peer-to-Peer implementation uses the TCP/IP stacks that are provided with
Windows 95/Widows 98 or Windows NT 4.0. The provided redirector software will
establish a connection with the printers supporting Peer-to-Peer, using a direct IP
connection over the network.
When configuring the network capabilities for the Windows computer, you must
include the “TCP/IP Protocol”.You do not need to activate any TCP/IP Client
application.
This inclusion of TCP/IP can also be done after initial Windows installation by going to
the Network setup function under Control Panel.To do this, you will need the Windows
CD-ROM.
Note: Because Peer-to-Peer uses the TCP/IP Protocol, TCP/IP operation must remain
enabled on the Network Card, and the Network Card must be assigned a valid IP
address. The name of the Peer-to-Peer printer, as it appears in the Windows Port
List, is the same as the IP Address assigned to the Network Card.The IP Address
may be changed by changing the TCP/IP section using the Web-based
management or MAP utilities.
If a NIC is being moved from a site that had active TCP/IP to a site that does not, the
unit should be reset to factory default to clear the IP Address and other network
information.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
Perform the following steps to install and set up the IP Peer-to-Peer Windows
redirector.
Before the installation, confirm that the printer is connected to the network correctly
and a “Ready” message is displayed on the printer’s LCD panel.
1. Insert the KX-PNBC8 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language and
Network Utility.
The Choose Destination Location window is displayed.
Note: If the language selection window is not displayed, select only Network Utility.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click Next>.
After copying files, the IP-PeerToPeer Setup window is displayed.
8. Click Printers....
The Printers... window is displayed, and a list of available printers
connected to the network is displayed in the Available Printers: box.
9. Click OK.
10.Click OK to close the IP-PeerToPeer Setup window.
The Setup Complete window is displayed.
11.Click Finish.
If you are using Windows NT 4.0, restart the system.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Peer-to-Peer Setup
IP Peer-to-Peer printing allows you to print to a network printer for networks without a
file server or for networks where you do not want to use the server for printing. Use
Peer-to-Peer printing on Windows NT 4.0, and Windows 95/Windows 98 systems.
If you need to change IP Peer-to-Peer settings click on the IP-P2P menu item in
Windows to bring up the Peer-to-Peer printing setup screen. An explanation for each
field on the screen is described below.
• OK: Selecting this button accepts all changes made to setup and exits the program.
• Cancel: Selecting this button discards any changes made to setup and exits the
program.
• Printers...: Selecting this button will bring up the next program screen.
• Max Hops for Search: Once you install the program, you can setup IP Peer-to-Peer
with the hop count. The default hop count is 2. The hop count number determines
how many networks the program will search to find units. An entry of 0 will only
search the network segment on which the printer is connected. An entry of 2 would
search the wire directly connected to the workstation, and, all networks accessible
through two routers. Entries of 15 or higher will automatically search every
connected network (this number is not recommended due to the network traffic it
would generate).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
• IP Port Base: The starting port number for the print server. Each print server is
assigned an IP port number. By default, the Network Card will be assigned port
number 10001. However, the network administrator can change this setting. If the
print servers on your network have been configured to use a different set of port
numbers, then you should configure the IP Peer-to-Peer software accordingly. Note
that IP Peer-to-Peer will use the new port number to communicate with all print
servers.
Note: The IP Port selected here and in the print server should be one less than the
actual port. (i.e. if port 10001 is desired, the IP Port on the this screen and on the
Network Card’s HTML should be defined as 10000.)
• Printer Names: Lets you select how you can view the printer names in the Windows
port list.
• based on Serial Numbers: Uses the printer server serial number to identify the
printer names. For example, if 12991354 is the serial number of the unit, 12991354
would be the printer port.
• based on IP Address: Use the IP address to identify the printer names. For
example, if 199.99.92.99 is the IP address for the unit, 199.99.92.99 would be the
printer port.
• based on DNS Name: Uses the DNS name to identify the printer name. For
example, <PTR-MKTG.DOMAIN.COM>.
• based on unit name: Uses the NIC Peer-to-Peer name set in the Novell section of
the print server setup. This is the name used to identify the printer. This defaults to
KXPxxxxxx where the xxxxxx stands for the digits represent the serial number of
the Network Card.
Note: If you have both the IP Peer-to-Peer and IPX Peer-to-Peer Windows redirector
Programs installed, you should not select the option to display IP Peer-to-Peer
units based on Unit Name. This will conflict with the IPX Peer-to-Peer Windows
redirector and may cause conflicts in the Windows Printer Port List.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
The “Printers...” button will allow you to list, search, remove and manually add printers
to the Window’s Port Listing. The following options are available on this screen:
• OK: Selecting this button accepts all changes made to setup and exits to the
previous screen.
• Cancel: Selecting this button discards any changes made to setup and exits to the
previous screen.
• Add: Selecting this button allows a user to manually add a printer to the Available
Printers: box by inputting the information in the fields to the left of the buttons. By
Adding a printer to the list in this manner, the user bypasses the “Search” function.
The port is not checked to see if it is actually available on the network.
• Delete: Selecting this button deletes the highlighted printer(s) from the Available
Printers: box below. Printers deleted in this fashion will no longer be listed in the
PORT listing when adding a printer. However, This does not actually delete the
printer from the network, it only removes it from the list maintained on this computer.
The printer may be re-added to the list by selecting the “Find Printers” button
(described below) as long as it remains connected to the network.
Note: You can not delete the IP Port from the printer’s property window. Use the “Delete”
button to delete the IP Port.
• Find Printers: Selecting this button will initiate a search routine out to the network.
This routine will then list all printers found on the network by the method defined in
the previous setup screen.The default method for displaying the list of printers is by
IP Address.
• Clear: Selecting this button clears the Available Printers: box below. This will not
clear any printer marked with the “Permanent” flag.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
• Select: Selecting this button will flag the highlighted printer(s) with the “S” flag. Only
30 printers may be selected at one time. When displaying the PORT list during the
process of adding or changing a printer, only Selected printers will be displayed.
• Permanent: Selecting this button will flag the highlighted printer(s) with the “P” flag.
Any printer marked with this flag will not be removed from the Available Printers:
box, even if the printer is physically removed from the network or the “Clear” button
is selected.
• IP Address:You may manually enter the IP address of the printer you wish to add to
the list.
• Name: Enter the name you wish the printer to be listed by in the “Unit Name” field.
• Port: Enter the actual port for communicating with the printer. This defaults to
10001.
• Description: Enter the description you wish listed in the “Description” field for the
printer.
• Available Printers:This is the list of printers that was detected on the network.This
list can be cleared using the “Clear” button and this list can be updated or refilled
using the “Find Printers” button. Printers in this list are described with three fields:
• Unit Name: This is the Printer Name method defined in the previous screen. The
default Printer Name method is by IP address. Printers may also be displayed by
the NIC Serial Number, by the DNS Name of the printer, or by the Unit Name. The
Unit Name is the “print server name” defined in the NIC.
• Unit IP: This is the actual IP address of the unit. This is displayed irregardless of
which Unit Name method is selected.
• Port Number: This is the IP port number that the computer will use to connect with
the printer over the network. The default port number is 10001. This number is
defined in the previous screen and must be matched with the NIC for proper
communication with the printer.
Note: The IP Port selected on the previous screen and in the printer should be one less
than the number displayed here. (i.e., if port 10001 is displayed here, the IP Port in
the previous screen and in the printer should be defined as 10000.)
• Description: This is the Printer's description. This field usually contains the
manufacturer's name and the printer's model.
• Flags: “S”, selected or “P”, permanent.
Any printers marked with an “S” flag will be displayed in the Window’s Port Listing.
When displaying the Windows port list during the process of adding or changing a
printer, only Selected printers will be displayed. Only 30 printers may be selected at
one time.
Any printer marked with a “P” flag will not be removed from the Available Printers:
box, even if the printer is physically removed from the network or the “Clear” button
is selected.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Software of the IP Peer-to-Peer Windows Redirector
Manually
You can add printers manually whenever you cannot find printers automatically due to
the router setup or hop count setting. In general, this should not be necessary.
1. Click Start, move the pointer to Programs, then click IP-P2P.
The IP-PeerToPeer Setup window is displayed.
2. Click the Printers....
The Printers... window is displayed.
3. Enter information for the printer in all the fields described below.
IP Address:
Name:
Enter the IP address of the printer you want to add.
Assign a name to the printer.You can enter any name which you
feel identifies the printer.
Port:
The port number of the printer. The default is 10001.
Description: Use this field to describe the printer location or the users who will
access the printer.
4. When you have entered all the information, click on Add.The printer
is listed in the Available Printers: box at the bottom of the window.
5. Click OK when you have finished adding all the printers you want to
add.
If you are using Windows NT 4.0, restart the system.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.4 Step 4:Setting Up the Printer Driver and the Printer Port
For Windows 95/Windows 98
■ If the printer driver is already installed
Set up the printer port.
Important: When installing the printer driver, select Local printer when a message to
select local printer or network printer appears.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Details tab.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
5. From the Print to the following port: box, select the printer port
specified in the IP Peer-to-Peer Windows redirector.
Window:Windows 95
6. Click OK to close the printer properties window.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
■ If the printer driver is not installed
Install the printer driver and set up the printer port.
1. Insert the KX-P8415 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language.
The Welcome window is displayed.
Note: If the language selection window is not displayed, proceed to step 7.
7. Click Next>.
The Choose Destination Location window is displayed.
8. Click Next>.
After copying files, the Select Printer Port window is displayed.
9. From the Available ports: box, select the printer port specified in the
IP Peer-to-Peer Windows redirector.
10.Click Next>.
The Setup Complete window is displayed.
11.Click Finish.
12.Restart the system.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows NT 4.0
■ If the printer driver is already installed
Set up the printer port.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Printer Properties window is displayed.
4. Click the Ports tab.
5. Click on the check box of the printer port specified in the IP Peer-to-
Peer Windows redirector.
6. Click OK to close the printer properties window.
If you wish to use the separator page, proceed to “Setting up the
separator page” on page 37.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
■ If the printer driver is not installed
Install the printer driver and set up the printer port.
1. Insert the KX-P8415 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language.
The Welcome window is displayed.
Note: If the language selection window is not displayed, proceed to step 7.
7. Click Next>.
The Choose Destination Location window is displayed.
8. Click Next>.
The Add Printer Wizard window is displayed.
9. Select My Computer, then click Next>.
10.From the Available Port: box, select the printer port specified in the
IP Peer-to-Peer Windows redirector.
11.Click Next>.
The Add Printer Wizard window with a message to select a
manufacturer and the model of the printer is displayed.
12.Click Have Disk....
The Install From Disk window is displayed.
13.Click Browse....
The Locate File window with a message “The device is not ready” is
displayed.
14.Click Cancel.
The Locate File window is displayed.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
15.Select CD-ROM drive in the Look in: box and openWinNT, English,
and Kx-p8415.inf, click Open.
The Install From Disk window with the specified path displayed in
the Copy manufacture’s files from: box is displayed.
Note: CD-ROM drive name varies depending on the computer.
16.Click OK.
The Add Printer Wizard window with Panasonic KX-P8415 in the
Printers: box is displayed.
17.Click Next>.
The Add Printer Wizard window with Panasonic KX-P8415 in the
Printer name: box is displayed.
18.If you use the KX-P8415 printer as the default printer, selectYes,
then click Next>.
The Add Printer Wizard window with a message asking whether the
printer will be shared with other users is displayed.
If you choose to share the printer, select Shared.
19.Click Next>.
The Add Printer Wizard with a message asking whether you want to
print the test page is displayed.
20.SelectYes or No, then click Finish.
The Setup Complete window is displayed.
21.Click Finish.
22.Restart the system.
If you wish to use the separator page, proceed to “Setting up the
separator page” on page 37.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Setting up the separator page
Note: The following steps are not required in Windows 95 and Windows 98 or if you do
not wish to use the separator page on Windows NT 4.0.
1. Copy the WinNT\English\Kx-p8415.sep file stored on the KX-
P8415 CD-ROM to the system32 folder.
2. Click Start, move the pointer to Settings, then click Printers.
3. Using the right mouse button, click the printer with the Network Card
installed.
4. Click Properties.
The Panasonic KX-P8415 Printer Properties window is displayed.
5. Click the General tab.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click Separator Page....
The Separator Page window is displayed.
7. Click Browse....
8. Select Kx-p8415.sep, then click Open.
9. Click OK.
10.Click OK to close the printer properties window.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 IPX Peer-to-Peer Printing
The following steps describe how to set up direct printing from a computer (Windows
95/Windows 98) using IPX Peer-to-Peer printing.
Step 1: Setting up the IPX/SPX protocol on a computer
Step 2: Installing and setting up the IPX Peer-to-Peer Windows redirector
Step 3: Setting up the printer driver and the printer port
4.2.1 Step 1:Setting Up the IPX/SPX Protocol on a Computer
To use IPX Peer-to-Peer printing, the IPX/SPX protocol must be installed and setup on
a computer. If the IPX/SPX is already used on the network, proceed to
section 4.2.2 on page 39.
If not, install the IPX/SPX protocol referring to the Help menu for Windows 95 and
Windows 98.
4.2.2 Step 2:Installing and Setting Up the IPX Peer-to-Peer
Windows Redirector
Windows IPX Peer-to-Peer printing allows Windows 95/Windows 98 workstations and
servers to print to Network Card printers without an intervening server and without
using IP. The main features of the Windows IPX Peer-to-Peer printing are as follows:
• Runs on Windows 95/Windows 98 workstations or servers “out of the box”.
• Runs on networks which do not have a NetWare file server, as well as those that do.
• Implements IPX Peer-to-Peer bi-directional printing between Windows workstations
and Network Card printers.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction and Preparation
The Peer-to-Peer implementation uses the IPX/SPX stacks that are provided with
Windows 95/Windows 98.The provided redirector software will establish a connection
with the printers supporting IPX Peer-to-Peer, without using an intermediate file
server, whether or not your network uses Novell NetWare.
The “IPX/SPX Compatible Protocol” must be installed when configuring the network
capabilities for the Windows computer. If you are not using NetWare, you do not need
to activate any NetWare Client application.
The IPX/SPX can be installed after initial Windows installation by going to the Network
setup function under Control Panel. To do this, you will need the Windows CD-ROM.
Note: Because Peer-to-Peer uses the IPX/SPX Protocol, Novell operation must remain
enabled on the Network Card, even if traditional Novell printing facilities are not
being used. The name of the Peer-to-Peer printer, as it appears in the Windows
Port List, is the same as the Novell print server name, and may be changed by
changing the Novell print server name using the Web-based management or MAP
utilities.
On power up, the Network Card sniffs the network to see if there is Novell activity. If
there is, it will use the same frame type and the local network number that it senses. If,
in addition, the NIC can log on to a file server, it will assume that Novell is normally
used and will store this frame type and new number in NV RAM so that, when it comes
up again, it will not have to spend the time sensing (which can take some time).
However, if the NIC cannot attach to a file server, it will use the sensed values, but will
not store them.
If the NIC does not see any Novell activity, it will use 802.2 on 802.3 as a frame type
and will assign itself a network number of 0. The frame type and network number
being used is reported on the status and configuration sheet.
If a NIC is being moved from a site that had active Novell to a site that does not, the
unit should be reset to factory default to clear the frame type and network number
information.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
Perform the following steps to install and set up the IPX Peer-to-Peer Windows
redirector.
Before the installation, confirm that the printer is connected to the network correctly
and a “Ready” message is displayed on the printer’s LCD panel.
1. Insert the KX-PNBC8 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language and
Network Utility.
The Choose Destination Location window is displayed.
Note: If the language selection window is not displayed, select only Network Utility.
7. Click Next>.
After copying files, the IPX Setup window is displayed, and a list of
available printers connected to the network is displayed in the
Available Printers: box.
8. Click OK to close the IPX-PeerToPeer Setup window.
The Setup Complete window is displayed.
9. Click Finish.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
IPX Peer-to-Peer Setup
IPX Peer-to-Peer printing allows you to print to a network printer for networks without a
file server or for networks where you do not want to use the server for printing. Use
peer-to-peer printing on Windows 95/Windows 98 systems.
If you need to change IPX Peer-to-Peer settings click on the IPX-P2P menu item in
Windows to bring up the IPX peer-to-peer printing setup screen. An explanation for
each field on the screen is described below.
• OK: Selecting this button accepts changes made to setup and exits the program.
• Cancel: Selecting this button discards any changes made to setup and exits the
program.
• Clear: Selecting this button clears the Available Printers: box below. This will not
clear any printer marked with the “Permanent” flag.
• Delete: Selecting this button deletes the highlighted printer(s) from the Available
Printers: box below. Printers deleted in this fashion will no longer be listed in the
PORT listing when adding a printer. However, this does not actually delete the
printer from the network, it only removes it from the list maintained on this computer.
The printer may be re-added to the list by selecting the “Find Printers” button
(described next page) as long as it remains connected to the network.
Note: You can not delete the IPX Port from the printer’s property window. Use the
“Delete” button to delete the IPX Port.
• Permanent: Selecting this button will flag the highlighted printer(s) with the “P” flag.
Any printer marked with this flag will not be removed from the Available Printers:
box, even if the printer is physically removed from the network or the “Clear” button
is selected (described above).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
• Find Printers: Selecting this button will initiate a search routine out to the network.
This routine will then list all printers found on the network by their print server name
(defined in the printer). The default print server name for a printer is a three letter
identifier and the six digit serial number of the NIC (for example, KXP_991225).
• Select: Selecting this button will flag the highlighted printer(s) with the “S” flag. Only
30 printers may be selected at one time. When displaying the PORT list during the
process of adding or changing a printer, only Selected printers will be displayed.
• Available Printers:This is the list of printers that was detected on the network.This
list can be cleared using the “Clear” button and this list can be updated or refilled
using the “Find Printers” button. Printers in this list are described with three fields:
• Unit Name: This is the print server name defined in the printer. The default print
server name for a printer is a three letter identifier and the six digit serial number of
the NIC (for example, KXP_991225).
• Description: This is the Printer's description. This field usually contains the
manufacturer's name and the printer's model.
• Flags: “S”, selected or “P”, permanent.
Any printers marked with an “S” flag will be displayed in the Window’s Port Listing.
When displaying the Windows port list during the process of adding or changing a
printer, only Selected printers will be displayed. Only 30 printers may be selected at
one time.
Any printer marked with a “P” flag will not be removed from the Available Printers:
box, even if the printer is physically removed from the network or the “Clear” button
is selected
43
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.3 Step 3:Setting Up the Printer Driver and the Printer Port
■ If the printer driver is already installed
Set up the printer port.
Important: When installing the printer driver, select Local printer when a message to
select local printer or network printer appears.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Details tab.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
5. From the Print to the following port: box, select the printer port
specified in the IPX Peer-to-Peer Windows redirector.
Window:Windows 95
6. Click OK to close the printer properties window.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
■ If the printer driver is not installed
Install the printer driver and set up the printer port.
1. Insert the KX-P8415 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language.
The Welcome window is displayed.
Note: If the language selection window is not displayed, proceed to step 7.
7. Click Next>.
The Choose Destination Location window is displayed.
8. Click Next>.
After copying files, the Select Printer Port window is displayed.
9. From the Available ports: box, select the printer port specified in the
IPX Peer-to-Peer Windows redirector.
10.Click Next>.
The Setup Complete window is displayed.
11.Click Finish.
12.Restart the system.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 LPR Printing
4.3.1 For Windows 95/Windows 98
Windows 95/Windows 98 comes with a TCP/IP stack. To print with this protocol, a
client also requires an lpr utility. This program is available from various sources. The
lpr queue can be created on each workstation or the lpr queue can be created on one
workstation and shared on the network. Windows 95/Windows 98 workstations can
also share a lpr printer installed on an Windows NT server on the network.
The following instructions are based on a shareware lpr application that is available
from various sources, including the Network Card manufacturer.You will need the
wlprs41.zip and wlprspl.txt for the lpr.
Loading the lpr Spooler
The Windows lpr Spooler Version 4.1 - User's Guide (wlprspl.txt) provides detailed
instructions for decompressing and installing the shareware lpr spooler.
Setting up the Network Card
The IP address, Subnet Mask and Default Gateway are required to be set for the
Network Card. If the value can be set using the printer LCD panel, refer to When
Setting by Direct Entering in Step 1 on page 19.
This can be done with MAP if you have a IPX connection on your network. Follow the
instructions for these programs which are documented elsewhere. If you cannot use
these programs, you can use the ARP procedure.
1. Install the Network Card in your printer.
2. Turn ON the printer.
Note: If you want to confirm the MAC ADDRESS after setting up the Network Card, print
out the KX-P8415 Configuration Page.Instructions on how to print the
Configuration Page, refer to the “KX-P8415 Setup Guide and Reference Guide”.
It should show that TCP/IP is enabled but that the Protocol address is not
configured.
If the unit already has an IP address, these procedures will not work. However,
you can use the HTML pages accessed by MAP or Web Browser to change the IP
parameters.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning IP Address with ARP
The Network Card must be on the same network segment as the workstation that you
are using to configure it. The TCP/IP stack must be installed and operating.
The DHCP settings of the Network Card must be set to “Enable”. It can be set by the
printer panel or MAP utilities.
1. On your computer, click Start, select Programs, then click MS-DOS
Prompt.
2. At the DOS prompt enter:
ping [any valid IP address on your network - not the print
server]. The identified unit should reply.
After the response, enter:
arp -s [IP address of the Network Card] [MAC ADDRESS of
the Network Card]. The entry should be accepted.
For example, arp -s 10.0.0.1 00-80-F0-00-30-05.
ping [IP address of the Network Card]. Request should time
out.
3. Recycle the power on the printer, or let the Network Card reset itself.
4. When the Network Card is up again, at the DOS prompt, enter:
ping [IP address of Network Card] (continue until you get
a reply).
Setting Up lpr on the Workstation
Once you install the spooler onto the workstation; the setup program will create a
group and icon.
1. Double click the spooler icon.
2. Click setup, define new queue.
3. At the Remote Host Name prompt enter the Network Card's IP
Address, and for the Remote Printer Name enter PORT1.
4. Click Start, move the pointer to Settings, then click Printers.
5. Double click Add Printer icon.
6. Click on Next>.
7. Select your driver and click Next>.
At this point, you should see an entry for your Windows lpr Spooler's printer in the
“Available Ports” listing. For example, C:\SPOOL\PRINTER_NAME.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3.2 For Windows NT 4.0
Windows NT 4.0 comes with TCP/IP and lpr capabilities but they must be installed
when the unit is configured.You must install the TCP/IP Protocol, Simple TCP/IP
Services, and Microsoft TCP/IP Printing prior to entering the network printer on the
workstation.
Note: Once you have lpr installed on a Windows NT Server workstation and have
allowed printer sharing, other workstations may use the printer through the
Microsoft Windows Network without having to have separate lpr queues installed
on each workstation.
Setting Up the Network Card
The IP address, Subnet Mask and Default Gateway are required to be set for the
Network Card. If the value can be set using the printer LCD panel, refer to When
Setting by Direct Entering in Step 1 on page 19.
This can be done with MAP if you have a NetWare connection on your network. Follow
the instructions for these programs which are documented elsewhere. If you cannot
use these programs, you can use the ARP procedure program.
1. Install the Network Card in your printer.
2. Turn ON the printer.
Note: If you want to confirm the MAC ADDRESS after setting up the Network Card, print
out the KX-P8415 Configuration Page.Instructions on how to print the
Configuration Page, refer to the “KX-P8415 Setup Guide and Reference Guide”.
It should show that TCP/IP is enabled but that the Protocol address is not
configured.
If the unit already has an IP address, these procedures will not work. However,
you can use the HTML pages accessed by MAP or Web Browser to change the IP
parameters.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning IP Address with ARP
The Network Card must be on the same network segment as the workstation that you
are using to configure it. The TCP/IP stack must be installed and operating.
The DHCP settings of the Network Card must be set to “Enable”. It can be set by the
printer panel or MAP utilities.
1. On your computer, click Start, select Programs, then click
Command Prompt.
2. At the DOS prompt enter:
ping [any valid IP address on your network - not the print
server]. The identified unit should reply.
After the response, enter:
arp -s [IP address of the Network Card] [MAC ADDRESS of
the Network Card]. The entry should be accepted.
For example, arp -s 10.0.0.1 00-80-F0-00-30-05.
ping [IP address of the Network Card]. The request should
time out.
3. Recycle the power on the printer or let the Network Card reset itself.
4. When the Network Card is up again, at the DOS prompt, enter:
ping [IP address of Network Card] (continue until you get
a reply).
Note: This only enters the IP address; you must use the HTML pages accessed by MAP
or Web Browser facility to enter the other IP parameters.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up lpr on the Workstation
The following procedure is used to set up the lpr spooler on the Windows NT 4.0
server.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Ports tab.
5. Click Add Port....
The Add Port window is displayed.
6. Select LPR Port, then click New Port....
The Add LPR compatible printer window is displayed.
Line 1: Address of host providing lpd (Print server);
enter IP address.
Line 2: Name of printer on that machine - enter PORT1 (the
word PORT MUST be in uppercase).
7. Click OK to exit.
Your Network Card is now configured to operate Windows NT.You may print from any
application by following the normal print instructions for that application.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Printing via the Server Computer
(Windows 95/Windows 98/Windows NT 4.0)
There are IP Peer-to-Peer printing, IPX Peer-to-Peer printing and LPR printing as a
method to print via the server computer.
5.1 IP Peer-to-Peer Printing
The following steps describe how to set up printing from the client computer (Windows
95/Windows 98/Windows NT 4.0) via the server computer (Windows 95/Windows 98/
Windows NT 4.0) using IP Peer-to-Peer printing.
Step 1: Setting up the TCP/IP protocol on the server computer
Step 2: Setting up the TCP/IP protocol in the Network Card
Step 3: Installing and setting up the IP Peer-to-Peer Windows redirector
on the server computer
Step 5: Sharing the printer port on the server computer
Step 6: Setting up the printer driver and the printer port on the client computer
When printing via the server computer, to perform step1 through step4, refer to
section 4.1.1 on page 16 through section 4.1.4 on page 31.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1.1 Step 5:Sharing the Printer Port on the Server Computer
For Windows 95/Windows 98
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Sharing tab.
Important: If the Sharing tab does not appear, using the right mouse button, click
Network Neighborhood icon and click Properties.
To set up printer as shared, click File and Print Sharing... button, select I
want to be able to allow others to print to my printer(s), and click OK.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
5.Click on the Shared As: button, then enter the printer name in the
Share Name: box and if needed, enter Comment and Password.
If you do not need to enter the password, proceed to step 8.
Window:Windows 95
54
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click OK.
The Password Confirmation window is displayed.
Window:Windows 95
7. Enter the password again, then Click OK.
8. Click OK to close the printer properties window.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows NT 4.0
You must login to the server computer as a supervisor to perform the following steps.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Printer Properties window is displayed.
4. Click the Sharing tab.
5. Click on the Shared button, then enter the printer name in the Share
Name: box.
6. Click OK to close the printer properties window.
If you wish to use the separator page, refer to “Setting up the
separator page” on page 37 to setup the separator page on the
server computer.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1.2 Step 6:Setting Up the Printer Driver and the Printer Port
on the Client Computer
For Windows 95/Windows 98
Important: Make sure to set the printer settings as shared on the server computer in the
properties window opened by clicking on the Network Neighborhood icon
before you proceed to the following steps. For more information, refer to Help
menu for Windows 95/ Windows 98.
■ If the printer driver is already installed
Setup the printer port.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Details tab.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click Add Port....
The Add Port window is displayed.
Window:Windows 95
6. Click on the Network button.
7. Click Browse....
The Browse for Printer window is displayed.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Click the printer which is connected to the server.
Window:Windows 95
9. Click OK.
The screen returns to the Add Port window and the printer to be
used is displayed in the Specify the network path to the printer: box
in the following manner.
\\server name\printer name
59
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Click OK.
The screen returns to the Panasonic KX-P8415 Properties window
and the printer port to be used is displayed in the Print to the
following port: box in the following manner.
\\server name\printer name
11.Click OK to close the printer properties window.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
■ If the printer driver is not installed
Install the printer driver.
1. Insert the KX-P8415 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language.
The Welcome window is displayed.
Note: If the language selection window is not displayed, proceed to step 7.
7. Click Next>.
The Choose Destination Location window is displayed.
8. Click Next>.
After copying files, the Select Printer Port window is displayed.
9. From the Available ports: box, select the LPT1 port.
10.Click Next>.
The Setup Complete window is displayed.
11.Click Finish.
12.Restart the system.
Setup the printer port.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Details tab.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click Add Port....
The Add Port window is displayed.
Window:Windows 95
6. Click on the Network button.
7. Click Browse....
The Browse for Printer window is displayed.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Click the printer which is connected to the server.
Window:Windows 95
9. Click OK.
The screen returns to the Add Port window and the printer to be
used is displayed in the Specify the network path to the printer: box
in the following manner.
\\server name\printer name
63
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Click OK.
The screen returns to the Panasonic KX-P8415 Properties window
and the printer port to be used is displayed in the Print to the
following port: box in the following manner.
\\server name\printer name
11.Click OK to close the printer properties window.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows NT 4.0
■ If the printer driver is already installed
Setup the printer port.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Printer Properties window is displayed.
4. Click the Ports tab.
5. Click Add Port....
The Printer Ports window is displayed.
6. Select Local Port, then click New Port....
The Port Name window is displayed.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Specify the network path to the printer in the following manner:
\\server name\printer name, then click OK.
8. Click Close.
9. Click OK to close the printer properties window.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
■ If the printer driver is not installed
Install the printer driver and set up the printer port.
1. Insert the KX-P8415 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language.
The Welcome window is displayed.
Note: If the language selection window is not displayed, proceed to step 7.
7. Click Next>.
The Choose Destination Location window is displayed.
8. Click Next>.
After copying files, the Add Printer Wizard window is displayed.
9. Select Network printer sever, then click Next>.
The Connect to Printer window is displayed.
Note: If your server computer is Windows 95/Windows 98, select My Computer and
continue the installation. Select LPT1 from the Available ports: box in the Add
Printer Wizard. After completing the installation, set up the printer port on the
printer’s property window. (For instructions on how to set up the printer port, refer
to If the printer driver is already installed on page 65)
67
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Click the Printer which is connected to the server in the Shared
Printers: box.
The printer port is displayed in the Printer: box in the following
manner.
\\server name\printer name
11.Click OK.
The Add Printer Wizard window is displayed.
12.If you use the KX-P8415 printer as the default printer, selectYes,
then click Next>.
13.Click Finish.
The Setup Complete window is displayed.
14.Click Finish.
15.Restart the system.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 IPX Peer-to-Peer Printing
The following steps describe how to set up printing via the server computer (Windows
95/Windows 98) from the client computer (Windows 95/Windows 98)using IPX Peer-
to-Peer printing.
Step 1: Setting up the IPX/SPX protocol on the server computer
Step 2: Installing and setting up the IPX Peer-to-Peer Windows redirector
on the server computer
Step 4: Sharing the printer port on the server computer
Step 5: Setting up the printer driver and the printer port on the client computer
When printing via the server computer, to perform step1 through step3, refer to
section 4.2.1 on page 39 through section 4.2.3 on page 44.
5.2.1 Step 4:Sharing the Printer Port on the Server Computer
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Sharing tab.
Important: If the Sharing tab does not appear, using the right mouse button, click
Network Neighborhood icon and click Properties.
To set up printer as shared, click File and Print Sharing... button, select I
want to be able to allow others to print to my printer(s), and click OK.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click on the Shared As: button, then enter the printer name in the
Share Name: box and if needed, enter Comment and Password.
If you do not enter the password, go to step 8.
Window:Windows 95
70
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click OK.
The Password Confirmation window is displayed.
Window:Windows 95
7. Enter the password again, then Click OK.
8. Click OK to close the printer properties window.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2.2 Step 5:Setting Up the Printer Driver and the Printer Port
on the Client Computer
Important: Make sure to set the printer settings as shared on the server computer in the
properties window opened by clicking on the Network Neighborhood icon
before you proceed to the following steps. For more information, refer to Help
menu for Windows 95/ Windows 98.
■ If the printer driver is already installed
Setup the printer port.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Details tab.
5. Click Add Port....
The Add Port window is displayed.
Window:Windows 95
6. Click on the Network button.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click Browse....
The Browse for Printer window is displayed.
8. Click the printer which is connected to the server.
Window:Windows 95
9. Click OK.
The screen returns to the Add Port window and the printer to be
used is displayed in the Specify the network path to the printer: box
in the following manner.
\\server name\printer name
73
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Click OK.
The screen returns to the Panasonic KX-P8415 Properties window
and the printer port to be used is displayed in the Print to the
following port: box in the following manner.
\\server name\priner name
11.Click OK to close the printer properties window.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
■ If the printer driver is not installed
Install the printer driver.
1. Insert the KX-P8415 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language.
The Welcome window is displayed.
Note: If the language selection window is not displayed, proceed to step 7.
7. Click Next>.
The Choose Destination Location window is displayed.
8. Click Next>.
After copying files, the Select Printer Port window is displayed.
9. From the Available ports: box, select the LPT1 port.
10.Click Next>.
The Setup Complete window is displayed.
11.Click Finish.
12.Restart the system.
Setup the printer port.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Properties window is displayed.
4. Click the Details tab.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click Add Port....
The Add Port window is displayed.
Window:Windows 95
6. Click on the Network button.
7. Click Browse....
The Browse for Printer window is displayed.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Click the printer which is connected to the server.
Window:Windows 95
9. Click OK.
The screen returns to the Add Port window and the printer to be
used is displayed in the Specify the network path to the printer: box
in the following manner.
\\server name\printer name
77
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Click OK.
The screen returns to the Panasonic KX-P8415 Properties window
and the printer port to be used is displayed in the Print to the
following port: box in the following manner.
\\server name\priner name
11.Click OK to close the printer properties window.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Using the Management Access Program or a
Standard Web Browser
MAP has the following requirements:
• The Microsoft TCP/IP protocol stack must be installed on this PC. It is not
necessary for the network to support TCP/IP. However, the TCP/IP protocol must be
installed on this PC even if the network does not support it.
• A web browser must be installed on this PC. Both Netscape Navigator and Internet
Explorer are supported.
• If the IPX search functions are to be used, then IPX must be installed on this PC.
Both the Microsoft and the NetWare 32-bit stacks are supported.
The Management Access Program (MAP) uses a Windows-based HTML viewer
program linked with a proprietary bi-directional IPX/IP channel program to allow
access to the Network Card's HTML-based monitoring and maintenance capabilities.
An IP Web Browser also provides access to this capability directly. Either program
allows you to:
• Configure your network protocols for the Network Card.
• Reset the Network Card remotely to either clear an error condition, or return the
print server to its factory default settings.
• Troubleshoot problems in the Network Card.
• Enable or disable the status page printout.
• Access a context-sensitive help menu that fully explains how to use each
Management Access Program feature.
Note: To be able to change parameter values with the Management Access Program or
the Web Browser, you must know the Network Card management password. The
factory default password is “sysadm”.
6.1 Where to Place the MAP Utility
The utility can be installed on any workstation hard drive or network drive.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 How to Install MAP in Windows
The Management Access Program must be installed from Windows 95/Windows 98 or
Windows NT 4.0. It CANNOT be installed from DOS. Use the following procedures to
install:
1. Start Windows on your PC or workstation.
2. Insert the KX-PNBC8 CD-ROM into your CD-ROM drive.
3. Click Start, then click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE and
click OK.
5. Follow the instructions on the screen and select a language and
Network Utility.
Note: If the language selection window is not displayed, select only Network Utility.
6. Follow the instructions on the screen to complete the installation.
6.3 Using the MAP Program
When you click on the MAP icon in the Windows Start menu to start the program, the
program will prompt you with a list of IPX print servers listed by their SAP identification
and IP print servers by their IP address. Select the print server you want to access.
The program will setup a link to the print server and obtain HTML code describing the
home page.
6.4 Web IP Browser
Once you have assigned an IP address to your Network Card, you may use an IP
browser, such as Netscape, to access the HTTP Server and the HTML code allowing
Network Card monitoring and maintenance.To access the HTTP Server screens from
your browser, do the following:
1. Open up your browser by clicking on its icon.
2. For the URL, type in the IP address of the Network Card. The HTTP
Server screens should appear. If you have problems, check to make
sure you are using the correct IP address.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5 Dynamic Host Configuration Protocol
DHCP is a service much like BOOTP that provides a method for assignment and
maintenance of IP addresses. The Network Card is able to obtain IP information from
this service.
There are two user settable variables related to the DHCP function. These are
accessible in the TCP section of Network Administration, in the HTML pages.
• DHCP enable
• IP Address in NVRAM
a.If DHCP is not enabled, the Network Card will make no DHCP requests under any
circumstances. If the Network Card does not have an IP address stored, or if “IP
Address in NVRAM” is OFF, the Network Card will issue BOOTP requests, etc.
b.If DHCP is enabled, the Network Card will make DHCP requests when the Network
Card is reset or on power up, provided that the Network Card does not have an IP
address stored, or that “IP Address in NVRAM” is OFF.These DHCP requests will
be in addition to BOOTP requests.
c.If DHCP is enabled, and the Network Card had an IP address in NVRAM, and “IP
Address in NVRAM” is ON, then the Network Card will use the IP information from
NVRAM and there will be no DHCP activity on the part of the Network Card.
The factory default is with both DHCP enable ON and IP Address in NVRAM ON. In
this case, the Network Card will issue DHCP requests if it does not already have IP
identification information stored in its NVRAM.
Note: If DHCP is enabled and the Network Card is in the default mode, you must
establish a permanent lease or reservation for the Network Card in the DHCP
server. Failure to do this may cause the same address to be given out to another
host.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
6.6 Windows Internet Name Service (WINS/DHCP)
6.6.1 Using WINS with your Print Server
WINS (Windows Internet Name Service) allows a device, such as your print server, to
register a NetBIOS name (for example, KXP_993011) along with its current IP
address (for example, 199.92.187.171). A client that wishes to contact the printer uses
the WINS server to match the NetBIOS name with an IP address. Most users will find
it easier to remember the NetBIOS name for the printer rather than its IP address.
To use WINS with your Print Server, you need to enter the IP address of the WINS
Server on the TCP/IP configuration screen.This screen is accessible through the Web
browser or MAP utility.
6.6.2 Configuring for the WINS Server
You can configure your DHCP Server to automatically provide WINS Server
information to the print server, or you can use the print server’s TCP/IP Configuration
Menu to manually enter the necessary information. Refer to your DHCP Server’s
documentation for further information on automatic configuration through the DHCP
Server.
To manually configure your print server to work with the WINS server:
1. Assign an IP address to the print server. Use MAP, ARP, DHCP or
RARP to assign the IP address.
2. Use an IP browser to access the print server’s TCP/IP Configuration
Menu, by entering the print server’s IP address in the Open Location
window.
3. Choose TCP/IP Configuration from the Main Menu.
4. The NetBIOS Name for the print server will be shown on this screen.
The NetBIOS name will be the print server’s serial number by
default (for example, KXP_993011), unless you have previously
configured a name for the print server with DHCP.
You may change the NetBIOS Name here, by entering a new name.
The name must be 15 characters or less in length.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
5. If you have previously configured a DHCP Server to provide the print
server with the IP address of the Primary WINS Server, the address
will be shown on the TCP/IP Configuration Menu. Otherwise, enter
the IP address of the Primary NetBIOS Name Server here.You may
optionally enter the IP address of a Secondary NetBIOS Name
Server, as well. However, if you have configured your DHCP Server
to provide the address of a Secondary WINS Server to the print
server, the address fields will automatically be filled in for you.
6. Reboot the printer/print server.
7. The check boxes labeled “Primary Server Logged in:” and
“Secondary Server Logged in:” on the TCP/IP Configuration Menu
will now indicate which WINS Server(s) the print server has
registered with.
Under normal circumstances, your print server will automatically
renew its registration with the WINS Server before it lease expires.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
NetWare Configuration
Use this chapter if you will be printing from a Novell NetWare NOS. This chapter is
divided into the following sections:
• Configuring NetWare 3.x describes how to configure the Network Card for use with
Version 3.x. Use PCONSOLE to set up the print server function.
• Configuring NetWare 4.x in Bindery Emulation describes how to configure the
Network Card for use with Version 4.x Bindery Services. Use PCONSOLE to set up
the print server function.
• Configuring NetWare 5 describes how to configure the Network Card for use with
Version 5 Directory Services. Use NW32Admn to set up the print server function.
• Configuring NetWare Directory Services describes how to configure the Network
Card for use with Version 4.x or 5 Directory Services. Use NWADMIN to set up the
print server function.
• Network Card Setup Parameters describes the parameters accessible via MAP or
an IP Browser used to configure the Print Server for NetWare.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1 Configuring NetWare 3.x
Before configuring NetWare, you must determine if the Network Card has its desired
name.You may use MAP or an IP Browser.
The following steps are the general procedure for configuring the Network Card.You
must have supervisor privileges to do this configuration. These steps are covered in
detail in the following paragraphs:
1. Start PCONSOLE and select the file server you want to use.
2. Create the print queues.
3. Specify the Network Card as a print server.
4. Configure the print server and printer.
5. Assign the print queues.
6. Set up the NOTIFY options.
7. Repeat the procedure for other file servers.
When you are finished, turn the printer off and on again.
Before you begin:
• Verify that you have supervisor privileges on the file servers on which the Network
Card print server is to be entered.
• Verify that your version of PCONSOLE is later than 1.0.
7.1.1 Start PCONSOLE and Select File Server
Follow these steps to start PCONSOLE:
1. Login to the network, type PCONSOLE and press the ENTER key.
2. Choose Change Current File Server from the Available Options
menu. A list of file servers is displayed.
3. Select the file server on which you want to install the print server
and press the ENTER key. If the name of the file server you want is
not displayed, press the h key to get a list of file servers.
4. Login to the file server.
5. Press the UP key to return to the Available Options menu.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1.2 Create Print Queues
The print server must be assigned to at least one print queue on the file server.
• If the print queue that you want the Network Card to service already exists, and you
know the name of this queue, go to section 7.1.3 on page 87.
• If you do not know the name of the queue, or it does not exist, use the following
procedure:
1. Choose Print Queue Information from the Available Options
menu, and press the ENTER key. A list of existing queues is
displayed.
2. To create a new queue, press the INSERT key. Enter the name of
the queue and press the ENTER key.You do not need to enter any
more information at this time.
3. Press the ESC key to return to the Available Options menu.
7.1.3 Enter the Print Server Name
A print server takes the print jobs from queues and sends them to the printer. Use this
procedure to specify the name of the print server:
1. Choose Print Server Information from the Available Options
menu, and press the ENTER key. A list of existing print servers is
displayed.
2. Press the INSERT key. The New Print Server Name box is
displayed.
Type the name of the print server into the entry box.The Novell print
server name is printed under Novell NetWare information on the
status page (refer to section 2.1.2 on page 10 for the print server
name).
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If desired, this name can be changed using MAP or Web Browser utilities. The
screen example shows how to enter the print server name for a print server with a
serial number of KXP_995310.
3. Press the ENTER key to add the print server name to the Print
Servers list.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1.4 Configure the Print Server
Use the following procedures to configure the Print Server's function:
1. Choose the print server name from the Print Servers list and press
the ENTER key.
The Print Server Information menu is displayed.
2. Choose Print Server Configuration from the menu and press the
ENTER key.
3. Choose Printer Configuration from the menu and press the
ENTER key. The Configured Printers menu is displayed. Since this
is a new Print Server entry, all printers are labeled “Not Installed”.
4. Choose the printer and press the ENTER key. The Printer 0
Configuration screen is displayed with a title of Printer 0.
5. If you choose to, change default in the Name field on this form to
something that helps you identify the printer, for example,
LASER_PRINTER. The print server uses this name in its message
back to the users on the Notify list. Select Name, enter a name, and
then press the ENTER key.
6. Select Type and press the ENTER key. A list of printer types is
displayed. Choose Remote Other/Unknown and press the ENTER
key. This creates default entries in the other fields. These defaults
are usually optimal, so do not change them without specific
knowledge of the effects.
7. Press the ESC key. At the prompt, choose to save your changes.
8. Press the ESC key to return to the Print Server Configuration menu.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1.5 Assign Print Queues to the Printer
When you assign queues to the defined printer, you authorize the print server to
service these queues.
Note: Do not assign the same queue to two different print servers. If a queue is
assigned to multiple print servers, print jobs may not go to the intended printer.
1. Choose Queues Serviced By Printer from the Print Server
Configuration menu.
2. Select the printer name from the list of defined printers.
3. Press the ENTER key to display the Available Queues list for the
printer.
4. Select the queue you want and then assign a priority level from 1 to
10. It is recommended that you accept the default priority level.
Press the ENTER key. The queue is displayed on the list for the
printer.
Press the ENTER key again to assign additional queues.
5. When you finish assigning queues, press the ESC key and then
save your changes. Continue to press the ESC key to return to the
Print Server Configuration menu. If you want to set Notify options,
go to section 7.1.6. If you are finished, continue to press the ESC
key and then save your changes.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1.6 Set Up Notify Options for the Printer
To enable the print server to notify users or user groups if a problem occurs with the
printer, set up the Notify options. The print server supports the enhanced NOTIFY
options for printers, including informing users when the printer:
• Is off-line, jammed, opened, or out of paper
• Requires a manual paper feed or a form change
• Has had an engine failure
1. Choose Notify List for Printer on the Print Server Configuration
menu.
2. Select the printer from the Defined Printers list. The screen
appears (which is blank for an initial installation). Press the ENTER
key to view a list of Notify Candidates.
3. Select the user or group from the list.
4. Set the First and Next intervals in the Notify Intervals screen. It is
recommended that you use the defaults. The First interval is the
number of seconds the network waits before it notifies candidates
about a print job problem. The Next interval specifies how often in
seconds candidates are notified. Enter a number for each interval
and press the ENTER key.
5. Press the ESC key and then choose Save Changes. Press the ESC
key at each screen until you reach the Print Server Configuration
menu. If you have finished the configuration, press the ESC key and
then save the changes.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
To install the print server on more than one file server, perform the procedures
described in section 7.1.1 through section 7.1.6 for each file server.You must use the
same name and password for the print server (or no password) on all file servers.You
set the password for the Network Card using the MAP program (refer to section 7.4 on
page 112). If you use a password, specify it on each file server using the Change
Password option on the Print Server Information menu of the PCONSOLE utility.
When the Network Card comes up, it automatically searches for and attaches to the
file servers that are no more than four hops and have no more than eight ticks
propagation delay. For extremely large or complex networks, this allows a bounded
search time on start-up. If the print server must attach to file servers beyond this
range, or, if you wish to accelerate start-up by eliminating the need to search all file
servers in the four hops/eight ticks radius, the file servers with which the print server is
to operate may be entered into the Print Server Configuration of a primary file server.
The primary file server can be any file server within the four hops/eight ticks
propagation time limits, but ideally is as close as possible to the print server. Once the
print server locates the primary file server and the list of file servers to be serviced, the
automatic search is dropped and the print server will go directly to those file servers
listed (and to no others).
7.1.8 Primary File Server
To use the primary file server option, use the following procedure on a file server close
to the printer:
1. List the file servers to be serviced by the primary file server by
selecting File Server To Be Serviced option from the Print Server
Configuration Menu.
2. Press the INSERT key to display the Available File Servers list.
3. Select the name of each file server to be serviced and press the
ENTER key to add it to the File Servers To Be Serviced list.
4. When the list is complete, press the ESC key to return to the menu.
5. Install the Network Card on each of the primary file servers.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1.9 Preferred File Servers
The MAP or Web Browser utilities allow you to identify a preferred file server, to be
identified within the Network Card itself. If a preferred file server is listed, the Network
Card will attach to this identified file server instead of initiating the automatic search. If
the preferred file server is also a primary file server (for example, has file servers listed
under file servers to be serviced), the Network Card will connect directly to these file
servers.
Note: The Preferred File Server is only applicable to bindery-based queues. Entering it
has no affect on NDS queues.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 Configuring NetWare 4.x
Novell's NetWare 4.x can operate in two modes NetWare Directory Services (NDS)
and Bindery Services Emulation. For NDS, see section 7.4 on page 112. These
services run simultaneously and transparently to each other. The Network Card may
be configured to operate with Bindery Services mode only (this section), or to operate
under NDS (section 7.3). When configured under NDS, the Network Card will also
service older file servers operating in bindery mode.
Note: If the Network Card is not properly set up for NDS and the Bindery Services mode
is not running, the Network Card can not find its file servers, and the status page
indicates the Novell NetWare protocol is not active.
7.2.1 Confirm Bindery Context
Before installing the Network Card on a Novell NetWare 4.x server in Bindery
Emulation mode, check that the server has a Bindery Context (name for the server
under Bindery Services mode). If the server does not have Bindery Context, it may be
preferable to install in NDS mode. If the Network Card must be installed in the Bindery
Emulation mode, the server must have Bindery Context. Perform the following steps to
confirm the server has Bindery Context:
1. Go to the 4.x server and at the system console type: load install
2. Select Maintenance/Selective Install from the menu.
3. Select NCF Files Options from the menu.
4. Select Edit AUTOEXEC.NCF from the menu.
5. Search the file to see if you have a statement similar to the following
included:
SET BINDERY CONTEXT=0U=ENG
Where =0U=ENG is an example of a name for the file server
context. Use your own file server context in place of =0U=ENG.
6. At the console prompt, type the SET BINDERY CONTEXT
statement that you entered in the AUTOEXEC.NCF file.
Note: The command at the console prompt takes effect immediately. The definition in
the file takes effect when the server is shut down and then restarted.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2.2 Configure in Bindery Mode with PCONSOLE
Once you confirm the server has Bindery Context, use the following procedures to
configure the Network Card.
1. Login to the network as ADMIN.
2. Type PCONSOLE and press the ENTER key. The following screen
is displayed.
Available Options
Print Queues
Printers
Print Drivers
Quick Setup
Change Context
the Bindery Mode).
Note:If you receive a message asking you to login to a server with Bindery connections,
the server you are attached to does not have Bindery Mode enabled. Follow the
procedures in section 7.2.1 on page 94 or login to a server with Bindery Services
activated.
4. From the Available Options screen, select Quick Setup and press
the ENTER key.
Use Quick Setup to connect your print server, print queue and
printer correctly.You can modify these later if you need to.
5. Select Print server and press the n key to modify the entry.
6. Enter the name of the print server in the Print server field and press
the ENTER key.
Note: The print server name is printed under the Novell Network Information on the
Status and Configuration report. The factory default name consists of three letter
identifier, an Underscore, and the serial number of the unit (refer to the section
2.1.2 on page 10).
7. Press the ESC key to move to the New printer field. Enter a name
and press the ENTER key.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Press the ESC key to move to the New print queue field. Enter a
name and press the ENTER key.
9. Press the ESC key to move to the Printer type field and press the
ENTER key. From the list of printer types, select Other/Unknown
and press the ENTER key.
10.When you are finished, press the u key to save the configuration.
Repeat steps 5 through 10 for each file server that the printer server
services.
11.To view, add, delete, or modify print servers or queues after the
initial setup, select either the Print Queues or Print Servers option
on the Available Options screen.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Configuring NetWare 5
NetWare 5 can operate in two modes NetWare Directory Services (NDS).
Proceed to the appropriate section depending on the currently used network protocol.
• Using IPS/SPX protocol
• Using TCP/IP protocol
7.3.1 When using IPS/SPX protocol
Before setting up the server computer and the client computer, the frame type setting
of the Network Card and the server computer need to be the same.
Confirm the frame type displayed on the “NetWare Configuration Menu” of MAP Utility
and the frame type of the server computer.
If the frame types are different, change the server’s frame type to the Network Card’s
frame type. Refer to the NetWare documentation for more information.
After setting the frame type, select the appropriate mode and set up the printer
settings of the server computer and the client computer.
[1]PServer method...................................................................section 7.4 on page 112
[2]NDPS method (using PServer method) ...................................................... page 98
7.3.2 When using TCP/IP protocol
Select the appropriate mode and set up the printer settings of the server computer
and the client computer.
[1]UNIX method (using LPR method)...............................the NetWare On Line manual
[2]NDPS method (using UNIX method).......................................................... page 109
97
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3.3 NDPS Method (Using PServer Method)
After setting up the frame type, perform the following procedures for printing via the
server computer (NetWare 5) from the client computer (Windows 95/Windows 98).
Step 1: Set up the PServer
Step 2: Set up the printer settings of the server computer
Step 3: Set up the printer settings of the client computer
Step1:Setting Up the PServer
Please refer to section 7.4 on page 112.
Step2:Setting Up the Printer Settings of the Server Computer
(NetWare 5)
Set up the environment that enables the client computer to login to the network in
NDS mode. For more information, refer to the NetWare On Line manual.
The printer setting of the server computer is set via the client computer.
1. Start the server computer.
2. Start the client (Windows 95/Windows 98) computer.
Login to the server computer as the supervisor of NetWare 5 in NSD
mode.
3. If the NDPS product is not installed, use the server computer to
install it.
(1)Click Novell on the Graphical Console screen (X Server--
Graphical Console), then select Install.
(2)Confirm that the NDPS products are displayed on the Install
Products window. (If not, click New Products and follow the
instructions on the screen.)
4. Confirm that the NDPS Broker has been activated on the server
computer.It automatically activates when NDPS products are
installed.
(1)Press the CTRL key and the ESC key simultaneously.
(2)Make sure that the NDPS Broker is activated.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Start the Net Ware Administrator.
The Network Administrator window is displayed.
6. If the NDPS Manager has been activated, proceed to step 17.
If the NDPS Manager has not been the activated, move to the
context where you want to create NDPS Manager object, then select
Create from the Objects menu.
The New Object window is displayed.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Select NDPS Manager from the Class of New Object: box, then click
OK.
The Create NDPS Manager Object window is displayed.
8. Type a NDPS Manager name in the NDPS Manager Name: box.For
example, NDPS_ MANAGER.
9. Click on the Browse button (
Server: box.
) displayed next to the Resident
The Select Object window is displayed.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Move to the context of which the server computer exists to station
the NDPS Manager in the Browse context: box. (If the current
context is suitable, there is no need to move.)
From the Available objects: box, select the server computer that
stations the NDPS Manager, then click OK.
The screen returns to the NDPS Manager Object window and the
server computer you selected is displayed.
11.Click on the Browse button (
Volume: box.
) displayed next to the Database
The Select Volume window is displayed.
12.Select the volume that stations the NDPS manager in the Volumes:
box, then click OK.
The screen returns to the Create NDPS Manager Object window
and the volume you selected is displayed.
13.Click Create.
The screen returns to the NetWare administrator window and the
NDPS manager you created is displayed.
After completing step 13, perform the following steps on the server computer.
14.Type “NDPSM” on the console screen of the server computer, then
press the ENTER key.
15.Select the NDPS manager you created in the Contents of Current
Context: box, then press the ENTER key.
The NetWare Configuration menu is displayed
101
Download from Www.Somanuals.com. All Manuals Search And Download.
16.Type “NWCONFIG” on the console screen, then press the ENTER
key.
The NetWare Configuration menu is displayed.
17.Choose NCF Files Option from the Configuration Option, then press
the ENTER key.
The Available NCF Files Option menu is displayed.
18.Select EDIT AUTOEXEC.NCF file, then press the ENTER key.
The File: AUTOEXEC.NCF window is displayed.
19.Type “NDPSM xxxxxxxx” at the bottom of the window.
(xxxxxxxx indicates the NDPS Manager name you entered in step
8.)
20.Press the ESC key.
A message “Save File AUTOEXEC. NCF?” is displayed.
21.Select Yes, then press the ENTER key.
The screen returns to the Available NCF Files Option.
22.Press the ESC key two times.
A message “Exit nwconfig?” is displayed.
23.Select Yes, then press the ENTER key.
Go back to the client computer and continue on the settings.
24.Move to the context of which you want to make NDPS Manager
object, then select Create from the Objects menu.
The New Object window is displayed.
25.Select NDPS Printer in the Class of new Object: box, then click OK.
26.Type a NDPS Printer name in the NDPS Printer Name: box.
For example, P8415_ NDPS.
Note: It is recommended to enter the model number of the printer because this name
displayed almost like a printer name from the client computer.
You can not use the same queue name you previously created for the NDPS
Printer name.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
27.Click on the Define Additional Properties: box and click Create.
The Create Printer Agent window is displayed.
28.Click on the Browse button (
Manager Name: box.
) displayed next to the NDPS
The Select Object window is displayed.
29.Move to the context of which the NDPS manager exists in the
Browse context: box. (If the current context is suitable, there is no
need to move.)
From the Available objects: box, select the NDPS manager, then
click OK.
The screen returns to the Create Printer Agent window and the
NDPS manager you selected is displayed.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
30.Click OK.
The Configure Novell PDS for Printer Agent window is displayed.
31.Click OK.
The Configure Port Handler for Printer Agent window is displayed.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
32.Select Forward Jobs to a Queue in the Connection Type box, then
click Next.
33.Click on the Browse button (
Name: box.
) displayed next to the Queue
The Select Object window is displayed.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
34.Move to the context of which the queue you created in PServer
exists in the Browse context: box. (If the current context is suitable,
there is no need to move.)
From the Available objects: box, select the queue you created in
PServer configuration and click OK.
The screen returns to the Configure Port Handler for Printer Agent
window and the queue you selected is displayed.
35.Click on the Browse button (
Name: box.
) displayed next to the Queue User
The Select Object window is displayed.
36.Move to the context of which the user who administrates this queue
exists in the Browse context: box. (If the current context is suitable,
there is no need to move.)
From the Available objects: box, select the user who administrates
this queue and click OK.
The screen returns to the Configure Port Handler for Printer Agent
window and the user you selected is displayed.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
37.Click Finish.
The Select Printer Drivers window is displayed.
Important: If the password is configured to the user who administrates, the password is
required on the console screen of the server computer. Move to the server
computer immediately and enter the password before “Loading Printer
Agent” message appears.
38.Click Continue.
The Information menu is displayed.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
39. Click OK.
The NDPS Printer window is displayed after the NDPS Printer
Object Creation message.
40.Click Cancel.
Setting up the printer settings of the client computer
(Windows 95/Windows 98)
Refer to “For Windows 95 / Windows 98” of section 5.1.2 on page 57.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3.4 NDPS Method (Using UNIX Method)
Perform the following procedures for printing via the server computer (NetWare 5)
from the client computer (Windows 95/Windows 98).
Step 1: Set up the printer settings of the server computer
Step 2: Set up the printer settings of the client computer
Setting Up the printer settings of the server computer (NetWare 5)
NDS mode. Make sure that the TCP/IP protocol is already installed on the server
computer.For more information, see your NetWare On Line manual.
The printer settings of the server computer is set via the client computer.
1. Perform step 1 through 31, refer to “Setting up the printer settings of
the server computer” on page 98.
2. Select Remote Job (IP on LPR) in the Connection Type box then
click Next>.
The configure Port Handler for Printer Agent window is displayed.
3. If the printer is specified by IP address, click on the Host Address
button, then enter the IP address.
If the printer is specified by the host name, click on the Host Name
button, then enter the host name.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Type the printer name in the Printer Name box.
For example, KXP8415-1.
5. Click Finish.
The Select Printer Drivers window is displayed.
Important: If the password is configured to the user who administrates, the password is
required on the console screen of the server computer. Move to the server
computer immediately and enter the password before “Loading Printer
Agent” message appears.
6. Click Continue.
The Information window is displayed.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click OK.
The NDPS Printer window is displayed after the NDPS Printer
Object Creation message.
8. Click Cancel.
The screen returns to the NetWare Administrator window and the
NDPS printer you created is displayed.
Setting up the printer settings of the client computer
(Windows 95/Windows 98)
Refer to “For Windows 95 / Windows 98” of section 5.1.2 on page 57.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4 Configuring the Network Card in NetWare Directory
Services
NetWare Directory Services (NDS) offers a different, more advanced approach to
network management than previous NetWare versions. Generally, it stores and tracks
all network objects. As a rule, all 4.x or 5 servers must have NDS loaded in order to
function. In this way, every NetWare 4.x or 5 server is a Directory server, because it
services named Directory objects such as printers, print servers and print queues.
With the appropriate privileges, you can create a print server object, which, once
configured in its context (or location) on the network, eliminates the cumbersome
setup of print servers on every network server. NDS provides true enterprise
networking based on a shared network database rather than an individually defined
physical site. The result is greatly improved print server setup and management.
The Directory Information Base (DIB) is used to store information about servers and
services, users, printers, gateways, etc. It is a distributed database, allowing access to
data anywhere on the network wherever it is stored.Pre-4.x NetWare versions provide
the same data found in the DIB but the data is stored in the NetWare Bindery.The DIB
was designed with more flexible access, more specific security, and, since it is
distributed, it was designed to be partitioned. The Directory uses an object-oriented
structure rather than the flat-file structure of the Bindery, and offers network-oriented
access, rather than server-oriented access found in the Bindery.
The Directory is backward-compatible with the NetWare Bindery through Bindery
emulation mode. Section 7.3 describes Print Server Operation with a 4.x or 5 NetWare
system in bindery emulation mode. When Bindery emulation is enabled, Directory
Services will accept Bindery requests and respond just as if a Bindery existed on the
NetWare server being accessed. Be aware that information obtained from the Bindery
distributed database. Even though the NetWare 4.x or 5 server is not operating from a
Bindery, the applications making Bindery requests will not know the difference.
You may use NWADMIN to configure the printer in NDS. Prior to printing, NDS must
be set up as follows and the Network Card must be set up with NDS Context and Tree.
See section 7.5 on page 121. The steps below describe the use of NWADMIN
configuration to create printer, print server, and print queue objects. Then, you will
assign, or associate, those objects with each other. If you wish to keep Bindery
resources on any server, you can under NetWare 4.x or 5 if you declare a SET
statement in your AUTOEXEC.NCF file.
For those who prefer, NetWare does offer PCONSOLE as an alternative to
NWADMIN. PCONSOLE can be used to set up static information about print servers
such as: which queues to service, and whom to notify in the event of a problem. See
Novell NetWare documentation for more information about the use of PCONSOLE for
NDS.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4.1 Create Printer Object
1. Click the NWADMIN icon in the NetWare Tools group in Windows.
The NetWare Administrator window is displayed. To bring up your
Directory Tree, open a Browser window by clicking the Tools menu
item then the Browse item.
2. Highlight the Organizational Unit or Organization where you want to
create the print service in the Directory Tree, select the Object item
from the main menu and choose Create.
Note: If you wish, you can create objects another way in NWADMIN by: selecting an
Organizational Unit, clicking on the right mouse button (which produces a pop-up
menu), and clicking Create... (use the left mouse button to bring up the New
Object window). From this point, the procedure continues as described.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
3. When the New Object window is displayed, scroll down the Class of
New Object: box, select the Printer icon and click OK.
4. When the Create Printer window is displayed, type a value in the
Printer Name field and click Create.
7.4.2 Create Print Server Object
1. Again, highlight the Organizational Unit, select the Object item from
the menu and choose Create.
2. At the New Object window, scroll down the Class of New Object:
box, select the Print Server icon, and click OK.
3. At the Create Print Server window, type a value in the Print Server
Name box and click Create.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4.3 Create Print Queue Object
1. Once again, highlight the Organizational Unit, select the Object item
from the menu and choose Create.
2. At the New Object window, scroll down the Class of New Object:
box, select the Print Queue icon, and click OK.
3. At the Create Print Queue screen, click on the Directory Service
Queue button, then type in values for Print Queue Name and Print
Queue Volume and click Create. If you don't know the Print Queue
Volume name (the hard drive you will be accessing), click on the
icon to the right of the volume field. The Select Object window is
displayed with the volume listed in Objects. If the volume is not
listed, scroll the Directory Context items until you find the volume
where you want the queue to reside.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click the object (hard drive) of your choice and it will appear in the
Selected Object: field. Click OK. The full volume will now appear in
the Print Queue Volume: field. Finally, click Create.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
2. When the Select Object window is displayed, find the print queue
object just created among the choices listed in the Objects: box and
select it.
Click OK and the print queue just created is added to the Print
Queues: box in the Printer: window. Click OK again.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4.5 Assign Print Server Object
1. At the Directory Tree, double click the print server object you just
created and bring up the Print Server window.
2. At the Print Server: window, click Assignments and Add... to bring
up the Select Object window. Select the printer object just created
from the Objects: box and click OK. Now the printer (with its context)
appears in the Printers: box of the Print Server: window. Click OK.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4.6 Check Assignments
At the Directory Tree, double click the Print Queue object you just created. At the
Print Queue: window, click Assignments.
If you configured the print queue and printer correctly they will appear in the proper
boxes on the Print Queue: window. Press Cancel.
7.4.7 Set Up and Reset the Printer
NWADMIN configuration is complete. Before you can begin printing, though, be sure
to set up and reset (power cycle) the printer.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
7.5 Network Card Configuration
The MAP utility or an IP Web Browser must be used to define the context and tree of
the Print Server. It is also used to change the print server name, set a password,
modify scan and frame search parameters, and sent in bindery-mode specific values.
Use the MAP utility or IP Web Browser (refer to Chapter 6 on page 80) to access the
Setup pages of the Network Card. Once you have accessed the Network
Administration pages or the Main Menu, do the following:
1. Select Setup NetWare under Protocols.
2. Select Enable NetWare. If it is not selected, the NetWare protocols
will not come up, the Network Card will not appear as an advertised
device, and the NIC will not be accessible using IPX SNMP.
3. The default name for the NetWare Print Server is KXP_xxxxxx,
xxxxxx is the serial number of the Network Card. This is also the
default name of the printer in Peer-to-Peer mode. If you want to
change the default print server name, type this name in the Print
Server Name box. Leave the space blank if the default name is to
be used.
4. If you want the Network Card login with a password, this password
may be entered in the Print Server Password field, and again in the
Password Retype field. If a password is used, this password must
be the same password for all bindery-based and NDS-based Print
Server entries.
5. Enter the name of a preferred bindery-based file server in the
Preferred File Server field. The Preferred File Server entry is
significant only for bindery or bindery emulation based operations.
Refer to 7.1.9 on page 93 for the significance of a Preferred File
Server. The Print Server must be configured on the preferred file
server. Incorrect setup of a Preferred File Server can interfere with
NetWare printing.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
6. If the Print Server is to be operated under Novell Directory Services,
type in a Context entry and Preferred NDS Tree entry in the
appropriate fields. Be sure to give the whole context, whether typed
or typeless, and do not begin your context path with a trailing period
(.). If you don't know your tree, type: whoami at the DOS command
line. A typed context name example is:
ou=standard.ou=organization_1
7. In the default mode, the Print Server scans each queue which it is to
service once per second. If you prefer a longer scan rate, you may
enter the time between scans in seconds in the Polling Interval
field.
8. The Network Card will normally monitor the network to determine
which frame type is being used for Novell. When it recognizes a
type, it will assume the same frame type. Once it selects a frame
type, the Network Card will only operate over that Novell frame type.
Monitoring normally starts looking for IEEE 802.3, then Ethernet II,
then 802.3 SNAP, etc. If your network is using multiple frame types
for Novell, you should bias the frame search to the desired type by
setting the button next to the designation under Ethernet Frame
Type.
9. You can Disable Bindery mode on the Print Server if you are
operating in NDS mode only. To do so, click on that box. If you
disable Bindery, the Network Card will not support Print Servers on
a Bindery file server.
10.Once you have selected all desired settings and entered the desired
NetWare information, you may cause this information to be entered
in the Network Card NVRAM by clicking Accept Settings. As with
all value changes, if you have not entered the Network Card
Management Password before, you must enter it in the appropriate
space before clicking Accept Settings.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
11.Entered values do not take effect until the Network Card is reset or
power cycled.You may reset from MAP or the Web Browser by
returning to the Home or Network Administration page, and click
Reset under System. Now click Reset Unit. Alternatively, you may
power cycle the printer. The new NetWare values should now be in
effect.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
7.6 Using the Novell PCONSOLE Utility
This section explains how to use the PCONSOLE utility to perform the following tasks:
• Attach and select a file server
• Select or delete queues for the print server
• Set-up the Notify function
See the NetWare Print Server Manual for detailed information on this utility.
Note: You must have Supervisor privileges to perform many PCONSOLE operations.
7.6.1 Changing the File Server
You can specify a file server as the current one. To change the file server, use the
following procedures:
1. Login to the current file server and start the PCONSOLE utility.
2. Select Change Current File Server from the Available Options
menu.
3. Press the INSERT key to display the available file servers.
4. Select the file server you want as the current one and press the
ENTER key.
5. Enter your username and press the ENTER key. If the username
requires a password, the Password screen is displayed. Enter the
password and press the ENTER key.
6. Select Change Current File Server from the Available Options
menu. A list of the attached file servers is displayed.
7. Select the current file server from the File Server/Username
screen.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
7.6.2 Changing Print Queues
When you print a file, your system sends the file to a print queue. The print server
assigned to that queue extracts the print job and sends it to the assigned printer. If a
print server is servicing queues on multiple file servers, you must assign queues to the
printer on each file server. To change the print queues, use the following procedures:
1. Start the PCONSOLE utility.
2. Select Print Server Information from the Available Options menu.
3. Select the print server from the list.
4. Select Print Server Configuration from the menu.
5. Select Queues Serviced by Printer from the menu.
6. Select a printer from the Defined Printers list.
7. Press the h key at the File Server/Queue/Priority screen. The
Available Queues list is displayed.
8. Select a queue from the list.
9. Press the ENTER key at the Priority screen to leave the priority
setting at 1.
The highest priority queue is 1; 10 is the lowest. To change the
priority of a queue, press the ENTER key at the File Server/Queue/
Priority screen to display the Priority setting screen. Press the back-
arrow key to delete the current setting.Type a new number from 1 to
10 and press the ENTER key.
Repeat steps 7, 8, and 9 to assign additional queues to the printer.
10.Press the ESC key and save all changes.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
7.6.3 How to Set Up Notify (NetWare 3.x Bindery mode only)
You can specify users or groups of users that are notified if a problem occurs when a
print job is sent to the printer. If the print server is servicing queues on multiple file
servers, you must set up a NOTIFY list for each file server. To set up NOTIFY, use the
following procedures:
1. Start the PCONSOLE utility.
2. Select Print Server Information from the Available Options menu.
3. Select the print server from the menu.
4. Select Print Server Configuration from the menu.
5. Select Notify List for Printer from the menu.
6. Select the printer from the Defined Printers menu.
7. Press the ESC key at the File Server/Notify Name/Notify Type/
First/Next screen. The Notify Candidates screen is displayed.
8. Select the user or user group from the Notify Candidates screen.
The Notify Intervals screen displays.
9. Set the First and Next intervals for notifying users about printer
problems. The First interval is the number of seconds the network
waits before it notifies users about a print job problem. The Next
interval specifies how often in seconds users are notified. Enter a
number for each interval and press the ENTER key.
10.Press the ESC key and save all changes.
11.Press the ESC key until you see the prompt to exit PCONSOLE.
SelectYes and then press the ENTER key.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Operation and Troubleshooting
This chapter describes normal operation of the Network Card in the printer, and also
provides information on how to troubleshoot any problems you might have with the
Network Card.
8.1 LED Status Indicator
The Network Card has two LED status indicators: amber and green. The amber LED
generally indicates job activity; it flashes when a print job is being communicated to
the Network Card; it is off when no activity is occurring.
The green LED indicates the operating condition of the Network Card when it is
powered on during normal operation. The following table provides the conditions that
this LED may indicate.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
LED Patterns
And the printer is...
THEN THE NIC...
Operating
Condition
Green LED is ON
solid.
First powered on.
Awaiting print jobs.
Is performing self-tests.
Is functioning properly.
Normal
Normal
Normal
Green LED - blinks Finished with self-tests.
3 times and stays
on.
Prints out the status
page.
Green LED blinks
rapidly.
Performing self-tests.
Performing self-tests.
Detects bad RAM chip.
Error
Error
Green LED blinks
rapidly 4 times then
pauses.
Failed the Ethernet
hardware self-test. Check
the network.
Amber LED blinks
short for 10
seconds. Amber
LED goes off and
the Green LED
blinks continuously.
Performing flash
memory self-tests
Did not pass the
Error
checksum test. Unit
automatically goes into
download mode and
awaits flash update.
Green LED blinks
slowly.
Awaiting print jobs
sometime after
power-on completes.
Some printer interface
error.
Error
Error
Green LED blinks
rapidly.
Awaiting print jobs.
Has lost its NetWare
connection to file server.
Green LED
alternately blinks
with amber
indicator.
Finished with power-on
sequence.
Has been reset to factory Error
defaults. Power off and
move jumper OP2 to OFF
position.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2 Status Page
The Status/Configuration report is sent as a print job to the printer when the print
server is powered on. For example, the report on the next page shows the
configuration of the print server immediately before the report is printed. The status
page is set to “Disable” by default, but it is alterable to Enable/Disable by MAP utility.
It is strongly recommended that you review this report immediately after installation
and any time the setup has been changed. If the report does not include a protocol
that was configured, check that the procedure was done properly.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
-----------------------------------------------------------------------
Unit Serial No: 995319
Network Address: 00:80:f0:20:2f:f7
Network Topology: Ethernet
Network Speed: 100 Megabits
Novell Network Information
Print Server Name: KXP_995319
Password Defined: No
Version: xx.xx
Connector: RJ45
enabled
Preferred Server Name: NW41_ETHER
Directory Services Tree: KME
Directory Services Context: KME
Frame Type: Ethernet II
Peer-to-Peer Information
Frame Type: Ethernet II
enabled
Network ID: 257
TCP/IP Network Information
Frame Type: Ethernet II
enabled
Protocol Address: 179.60.27.183
Subnet Mask: 255.255.0.0
Default Gateway: 179.60.27.1
WINS Name:
IPP Network Information
Internet Printing Protocol
enabled
http://179.60.27.183:631/print
-----------------------------------------------------------------------
Novell Connection Information
Printer Name: KXP_995319_1
File Server: NW41_ETHER
Queue: KX_P8415_183
No Notify Defined
Priority: 1
Attached: Yes
Peer-to-Peer Connection Information
Printer Name: KXP_995319
TCP/IP Connection Information
Port Number : 10001
-----------------------------------------------------------------------
130
Download from Www.Somanuals.com. All Manuals Search And Download.
8.3 Resetting the Print Server to Factory Default
You can cause the Network Card to restore all parameters to factory default values, so
the Network Card appears just as it came from the factory.You may choose to do this
when the Network Card is moved to a new location where the environment (NetWare
file servers, IP subnets, and so on) is different.
This process is called “Reset to Factory”. It can be done with the HTML (accessed via
MAP or a Web Browser) utility. However, if network access is not possible, the
following method may be used.
Note: Resetting to factory default means that the print server loses all data such as
names and IP addresses. It does not lose its serial number or MAC (Ethernet
hardware) address.
To reset the Network Card:
1. Power off the printer and remove the Network Card from the printer.
The removal process is the reverse of the installation process in
Chapter 2.
2. Locate the Reset Jumper. It is labeled OP2. See diagram in
Appendix A.
3. Move this jumper to the connector side position, so that the jumper
covers the center pin and the pin nearest the jumper designator.
4. Install the Network Card as shown in Chapter 2. Do not connect the
printer to the network.
5. Power on the printer. The Network Card performs its diagnostic self
tests. The green LED blinks 3 times then goes into an alternating
green/amber light sequence. When you see this pattern, power off
the printer.
6. Remove the Network Card from the printer.
7. Move the OP2 jumper to its bracket side position, so that the jumper
covers the center pin and the pin nearest the OFF designation.
8. Reinstall the Network Card as instructed in to Chapter 2.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
8.4 How to Diagnose Problems
Use the following list to determine the cause of printing problems:
1. Verify that the printer is functioning properly.
• Is the printer printing? Make sure the printer is operating properly by causing it
to generate a test page. See the KX-P8415 printer's Setup Guide and
Reference Guide for instructions on generating a test page.
• Is the printer on-line? Verify that the printer is on-line or else nothing will print.
• Does the control panel display an error message? Review the printer
documentation for an explanation of the error messages.
2. Check the Network Card's LED status indicator to ensure that there
information.
3. Check the status page to see what protocols are enabled and active.
See the appropriate chapter to confirm that you have installed and
configured your network protocol correctly for the Network Card.
See section 8.2 on page 129, for an example of the status page.
4. If you added, changed, or removed any new hardware on the
network, verify that it was installed correctly.
5. If you added any new software applications, make sure the program
is compatible and installed correctly on the network. See your
network protocol documentation to confirm.
6. If you are using NetWare as NOS, use the checklists in the next
section to determine the nature of the problem.
132
Download from Www.Somanuals.com. All Manuals Search And Download.
8.5 Troubleshooting Checklists for the NetWare
Protocol
Use the checklists in this section to identify and solve problems.
It is recommended you use MAP to get the NetWare setup and parameter values. If
you have not resolved the problem after running MAP, go through the checklists in this
section.
NetWare Checklist
• Is the print server name entered correctly? The factory-default name is
KXP_xxxxxx (xxxxxx is the serial number of the Network Card). The serial
number is located on the card.(refer to section 2.1.1 on page 10)
• Did you assign print queues to the printer? It is recommended you assign each
print queue to only one Network Card-connected printer. If print queues are
assigned to other network printers, the print jobs may be going to an other network
printer.
• Did you assign the printer to the type Remote Other /Unknown?
• If the PCONSOLE settings are correct, the connection between the printer and
network may have been broken. Turn the printer off and, using PCONSOLE, wait
for the status message Not Connected. Turn the printer on and the status should
change to Waiting for Job.
File Server Checklist
• Is there enough disk space on the file server and is it running?
• Is the correct file server associated with the printer? Use PCONSOLE to check
this.
• Did you have the proper rights to configure the printer?
• Are the File Server and the Print Server communicating? Run NetWare's
COMCHECK utility from any network workstation to check this.
• Are there enough user positions on the File Server? The Print Server function logs
on as a user.
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Workstation Checklist
• Is the network loaded onto the workstation? See the NetWare documentation.
• Is the application set up to print to the printer? For instance, are you using the
correct driver?
• Is the workstation connected to the correct print queue? Print a file and verify that
the file goes to the queue.
• Are the print queues assigned to the Network Card-connected printer also
assigned to another network printer? If they are, the print jobs may be going to that
printer.
• From PCONSOLE, enter a sample print job directly into an assigned queue. Does
the job become Active? Is job printed?
• Is AUTO ENDCAP enabled? Auto Endcap lets you send data to a network printer.
Use PRINTCON to check. If not, enable it.
Network Card Configuration Checklist
If all your hardware connections are correct, check the following:
• Use MAP to check the status of the print server. The Report Print Server Status
screen shows the status for the selected network interface card. This report
includes a status of file servers and queues assigned to a printer along with a
description of any problems.
• The printer may not be assigned to the correct print queues. Use PCONSOLE to
direct print jobs to the correct queues, then check to see if the print job is in the
queue.
• If devices were added or changed, use PCONSOLE to make sure you configured
the new devices correctly.
• Make sure the Network Card's name has been entered correctly. If you changed
the name in MAP, you must also change the name in PCONSOLE before you can
print.
• Use PCONSOLE to check the Printer Status. Make sure it is not stopped or
paused.
• You cannot use PCONSOLE Version 1.0 to configure the network interface card.
Contact Novell for an upgrade.
134
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Server/File Server/Printer Checklist
Check the following to see if:
• The Network Card can log into the file server, and can service jobs from a File
Server.
• The print server name is listed on that File Server.
• The password assigned to the Network Card through PCONSOLE matches the
password assigned through MAP. Use MAP to update the password stored in the
network Print Server's memory.
• The print job is in the print queue and waiting to be printed. Use PCONSOLE to
check if the print jobs are being sent to the printer.
Workstation to Network Card Connection Checklist
To make sure the workstation is communicating with the Network Card, check the
following:
• Print a file from the workstation and make sure the print job gets to the print queue
using PCONSOLE. If the print job does get to the queue, the problem is not with
the workstation/print server connection.
• Use CAPTURE to send data to the printer from a workstation software application.
See your NetWare print server manual for information.
• Make sure another printer is not taking the print jobs from the queues BEFORE
the Network Card can service the job. To do this, disable the other printer until you
can verify the Network Card-connected printer setup.
Network Card Loses Its File Server Connection
If the Network Card loses its connection to the file server, it can take approximately 5
to 10 minutes to reconnect. If the connection is not made after a reasonable amount of
time, check the error conditions to troubleshoot the problem.
Unable to Print from a Different Context
The Network Card does not support printing from a context different from the context
you are installed upon. If you want to do this, you must create an alias queue. See
your NetWare Manual for more information.
135
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Jumper Settings
The Network Card will normally automatically configure the network configuration
without the need to access internal jumpers. However, there are certain jumpers on
the board that you may have to access under certain circumstances. If you need to
change the jumpers, follow the steps in this section.
HANDLING PRECAUTIONS
FOR
STATIC SENSITIVE DEVICES
The Network Card is normally contained within the printer which acts to protect sensitive
components from damage due to electrostatic discharge (ESD) during normal operation.
When performing installation procedures, however, take proper static control precautions
to prevent damage to equipment.
Make sure you do not have the printer plugged into a wall outlet. If it is, unplug the
power cord Before you open the unit. Remove the Network Card according to the
printer instructions.
136
Download from Www.Somanuals.com. All Manuals Search And Download.
A.1 Network Card and Jumper Locations
The illustration below shows the location of each of the jumpers on the 100BaseTX/
10BaseT Network Card with an RJ-45 connector only.
A.2 Reset to Factory
The Network Card may be restored to factory default conditions by jumper (OP2).The
function of OP2 is to reconfigure NVRAM. Do this when a unit is moved from bracket
site to another and should be restored to as-new condition.
If the unit is powered up with a jumper in the OP2 connector side position, the board
will go into a reset all parameters to Factory Default state.This will be indicated by the
three quick green flashes followed by the alternating red and green indications (once
per second rate).This special indicator sequence means that the NVRAM parameters
have been reset to factory default values. Now turn off power and shift the OP2 jumper
to the bracket side position.The unit will operate normally when you turn the power on
again.
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Specifications
B.1 Network Card
The following table provide general specifications for the Network Card.
Network Card General Specifications (Small Board)
Size:
123.7 mm length x 95 mm height
8 ounces
Weight:
Environment:
0 to 50 degrees Centigrade, 5% to 80% humidity
Controls and Indicators: One green LED and one amber LED
Configuration:
Connectors:
Stored in non-volatile memory
Ethernet: 8-wire RJ-45 100BaseTX/10BaseT
B.2 Network Cable
Use the following universal Ethernet standard when configuring your RJ-45 connector
of network cable to connect to the 100BaseTX/10BaseT connector of the Network
Card.
Important: For 10BaseT use Category 3, 4 or 5 shielded cable.
For 100BaseTX use Category 5 shielded cable.
Pin Number
Color
Ethernet
8
7
6
5
4
3
2
1
blue/white
blue
orange/white
green/white
green
Receive -
orange
Receive +
Transmit -
Transmit +
brown/white
brown
138
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Configuring Directory Services ................ 94, 97
Configuring NetWare 3.x .................................... 86
Configuring the Network Card
Numerics
100BaseTX ........................................................... 138
10BaseT ................................................................ 138
NetWare Directory Services ................... 112
Confirm Bindery Context .................................... 94
Connector
A
Assign Print Queues ............................................ 90
Assign Print Server Object .............................. 119
Assign Printer Object ......................................... 117
Assignments
RJ-45 .............................................................. 138
Context
Confirm Bindery ............................................ 94
Create a Print Queue Object .......................... 115
Create a Print Server Object .......................... 114
Create Print Queues ............................................ 87
Check .............................................................. 120
B
D
Bindery Context ..................................................... 94
Bindery Emulation
DHCP ................................................................ 82, 83
Diagnosing Problems ........................................ 132
DIB ........................................................................... 112
Differences
Configuring ...................................................... 94
Bindery Services ................................................... 94
Browser
Standard Web ........................................ 80, 81
DIB and the Bindery ................................... 112
Directory Information Base .............................. 112
Directory Services
C
Configuring .............................................. 94, 97
Dynamic Host Configuration Protocol ... 82, 83
Cable
100BaseTX ................................................... 138
10BaseT ........................................................ 138
Cable Specifications .......................................... 138
Changing Print Queues .................................... 125
Changing the File Server ................................. 124
Configuration
E
Emulation
Bindery ............................................................. 94
Bindery mode ................................................. 95
Network Card ............................................... 121
Print Server ..................................................... 89
Configure in Bindery Mode ................................ 95
Configure the Print Server ................................. 89
Configuring Bindery Emulation ........................ 94
F
Primary ............................................................. 92
139
Download from Www.Somanuals.com. All Manuals Search And Download.
I
N
Indicator
NCF Files ................................................................. 94
LED Status .................................................... 127
Install Print Server on Multiple File Servers 92
Installation
using UNIX method .................................... 109
MAP in Windows ........................................... 81
Installing the Network Card ............................... 10
IP Peer-to-Peer Printing ............................. 16, 52
IP Peer-to-Peer Windows redirector
Configuring for 3.x ........................................ 86
NetWare Configuration ....................................... 85
NetWare Directory Services ..................... 94, 97
Network Card
Install ................................................................. 23
IPX Peer-to-Peer Printing .......................... 39, 69
IPX Peer-to-Peer Windows redirector
Install ................................................................. 39
J
Installing ........................................................... 10
Jumper Locations ............................................... 137
Jumper Settings .................................................. 136
P
L
PCONSOLE configuration process
LED Status Indicator .......................................... 127
LPR Printing
Primary and Preferred File Servers ................ 92
Print Data Transfer Method ............................... 14
Print Queue Object
Windows 95/Windows 98 ........................... 47
Windows NT 4.0 ............................................ 49
M
Create ............................................................. 115
Print Queues
Management Access Program ......................... 80
MAP
Changing ....................................................... 125
Create ............................................................... 87
Print Server
How to Install .................................................. 81
Using ................................................................. 81
MAP Utility .................................................... 80, 121
Multiple Print Servers .......................................... 92
Print Server Configuration ................................. 89
Print Server Name ........................................ 10, 87
140
Download from Www.Somanuals.com. All Manuals Search And Download.
Print Server Object
Specifications
Assigning ....................................................... 119
Create ............................................................. 114
Printer
Standard Web Browser ...................................... 80
Assigning Print Queues .............................. 90
Power Cycle ................................................. 120
Set Up Notify Options .................................. 91
Printer Notify Options .......................................... 91
Printer Object
T
Assigning ....................................................... 117
Printing directly from the client computer ..... 16
Printing through the server computer ............ 52
Problems
Network Card Configuration
Diagnosing .................................................... 132
Procedures
Network Card Loses File Server
Print Server Name ........................................ 87
Print Server/File Server/Printer
Checklist ..................................................... 135
R
Unable to Print from a Different
Context ........................................................ 135
Report
Workstation Checklist ................................ 134
Status/Configuration .................................. 129
Resetting Print Server ....................................... 131
Resetting unit to factory defaults ................... 137
RJ-45 Connector ................................................. 138
U
S
Using MAP ...................................................... 80, 81
Using the MAP Utility ........................................... 80
Utility
Select File Server ................................................. 86
Selection
MAP ................................................................... 80
File Server ....................................................... 86
Services
W
Bindery ............................................................. 94
Setting
Web Browser ....................................... 80, 81, 121
IPX/SPX protocol .......................................... 39
printer driver .......................... 31, 44, 57, 72
printer port .............................. 31, 44, 57, 72
separator page .............................................. 37
TCP/IP protocol ..................................... 16, 18
Sharing the printer port ............................... 53, 69
MAP Utility ....................................................... 80
Windows Internet Name Service ..................... 83
WINS ......................................................................... 83
141
Download from Www.Somanuals.com. All Manuals Search And Download.
|