Always there to help you
Register your product and get support at
DS7530/05
Question?
Contact
Philips
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted
candles).
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
1 Important
•
•
Follow all instructions.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
•
•
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified
by the manufacturer.
Warning
• Never remove the casing of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this device away from direct sunlight, naked
flames or heat.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
•
•
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
•
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
•
Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the unit:
•
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
Batteries (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, fire or
the like.
•
Apparatus shall not be exposed to
dripping or splashing.
3
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your Docking
Speaker
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this docking speaker, you can enjoy audio
from the iPod/iPhone, Bluetooth devices, and
other external audio devices.
What's in the box
Check and identify the contents of your
package:
•
•
•
•
Main unit
AC power adaptor
Quick start guide
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
a
d
c
b
e
f
h
g
a
Bluetooth
Enable or disable Bluetooth function.
•
b Dock for the iPod/iPhone
c ON/OFF
•
Switch on/off the docking speaker.
d -VOLUME +
•
Adjust volume.
e DC IN
•
Connect power.
f AUX IN
•
Connect an external audio device.
g Battery compartment
h Stand foot
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: Battery power
3 Get started
Caution
Always follow the instructions in this chapter in
sequence.
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Remove batteries if they are exhausted or will not be
used for a long time.
• Batteries contain chemical substances, so they should
be disposed of properly.
Connect power
This docking speaker can be powered by either
AC power or batteries.
1 Open the battery compartment.
2
Insert 4 x 1.5V AA batteries with correct
polarity (+/-) as indicated.
Option 1:AC power
3 Close the battery compartment.
Caution
PUSH
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the back
of the unit.
• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adapter to:
•
the power socket at the back of the
docking speaker.
•
the wall socket.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn on
Switch the power button to ON position to
turn on the docking speaker.
» The LED indicator lights up.
Switch to standby mode
The docking speaker switches to economic
standby mode in the following situation:
•
The speaker is idle for 15 minutes when
powered by AC supply;
•
The iPod/iPhone or external audio device
is disconnected when the speaker is
operated on batteries.
» The LED indicator lights off.
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3
For first-time use, you will be asked to
install DockStudio app on your iPod/
iPhone.
4 Play
4 Tap [Yes] (yes) to accept the installation
request.
5 Follow the on-screen instructions to
Play from iPod/iPhone
complete the installation.
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
•
•
•
iPod touch (2nd, 3rd, and 4th generation)
iPod classic
iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
6 Launch the app after the installation.
7 Play audio on your iPod/iPhone.
» You can hear audio from this docking
speaker.
•
•
•
•
Charge the iPod/iPhone
When the docking speaker is connected to
power, the docked iPod/iPhone begins to
charge automatically.
Listen to the iPod/iPhone
Philips DockStudio app brings a suite of new
features to your docking speaker, including
Internet radio and a multi-function alarm clock.
To enjoy more features, you are recommended
to install this free application.
Play from Bluetooth device
Pair with Bluetooth devices
Note
1 Switch the power button to ON position.
» The LED indicator lights up.
2 Insert the iPod/iPhone into the dock.
• Before you connect a Bluetooth device to this docking
speaker, familiarize yourself with the Bluetooth
capabilities of the device.
• The effective operation range between the docking
system and the paired device is approximately 10
meters (30 feet).
• Keep this docking speaker away from other electronic
devices that may cause interference.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press Bluetooth to select Bluetooth
source.
To disconnect Bluetooth:
•
Press Bluetooth on the docking speaker
again.
» The Bluetooth button blinks.
•
Deactivate Bluetooth function on
your device or move it beyond the
communication range.
2 Turn on Bluetooth function on your device.
•
Different devices may have different
way to activate Bluetooth.
Play from an external audio
device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
• Make sure that no iPod/iPhone is docked in the docking
speaker.
1
Connect an MP3 link cable (not supplied) to:
•
the AUX IN socket at the back of the
docking speaker.
•
the headphone socket on an external
device.
3 Scan Bluetooth devices that can pair with
your device.
2 Play music on the device (see the device's
4 When “DS7530” is displayed on your
device, select it to start connection.
» Double beep tone confirmation is
heard and the Bluetooth button stops
blinking if connection is successful.
user manual).
Adjust volume
» A different Bluetooth icon is displayed
During play, press -VOLUME + to adjust
on your device.
volume.
5 Play music in your device.
» Music comes through the docking
speaker.
Tip
• If your Bluetooth device has been paired with DS7530
before, you just need to find out “DS7530” on your
Bluetooth menu, then confirm the connection.
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
General information
Power supply
-AC Power
5 Product
information
Model:
S018KB0900200
(Philips);
Input: 100-240V ~
50/60Hz, 500mA;
Output:9V 2000 mA
4 x AA batteries
Note
• Product information is subject to change without prior
notice.
-Battery power
Operation Power
Consumption
Eco Standby Power
Consumption
Max. load for iPod/
iPhone
<18 W
Specifications
<0.5 W
5V 1 A
Amplifier
Dimensions
Total Output Power
Signal to Noise Ratio
MP3 Link
2 x 5 W RMS
>60 dBA
0.6V RMS 22
kohm
- Main Unit (W x H x D) 311 x 111 x 37.6mm
Weight
- Main Unit
0.28 kg
Bluetooth
Standard
Bluetooth Standard
Version 2.1+EDR
4 dBm (Class 2)
2.402 ~ 2.480
Output power
Frequency band
GHzISM Band
Range
10 m (free space)
EN 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot connect with the system.
6 Troubleshooting
•
The device does not support the profiles
required for the system.
•
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
The system is not in the pairing mode.
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
Warning
• Never remove the casing of this device.
•
•
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support).When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
The paired device connects and disconnects
constantly.
•
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
•
No power
•
Ensure that the AC power plug of the unit
is connected properly.
Ensure that there is power at the AC
outlet.
•
No sound
•
Adjust the volume.
No response from the unit
•
Disconnect and reconnect the AC power
plug, then turn on the unit again.
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
•
The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
11 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
7 Notice
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards.Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
This product complies with the radio
interference requirements of the European
Community.
Note
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
• The type plate is located inside the stand foot of the
docking speaker.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2002/96/EC.
EN 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
DS7530_05_UM_V2.1
Download from Www.Somanuals.com. All Manuals Search And Download.
|