iBoom® Home
DLA77082/79
EN iBoom Home
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Important information
Your Philips iBoom Home
Congratulations on your purchase and welcome to Philips!
Your Philips iBoom Home (DL77082/79) is a clock radio
and home sound solution for iPod.With iBoom Home,
you can listen to your iPod in stereo sound, use your iPod
as your alarm clock, and even fall asleep to your favorite
playlist. iBoom Home also charges your iPod while cradled
in the universal iPod dock with pivoting 30-pin connector
– no dock inserts needed. iBoom Home also features an
attached Aux-In Cable to enjoy other audio devices, as
well as battery backup to ensure that the correct time
and alarm settings are maintained.
Take time to read this manual before you use your Philips
iBoom Home (DLA77082/79). It contains important
information about operating your Philips iBoom Home
DLA77082/79.
To fully benefit from the support that Philips offers,
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner. Trademarks
are the property of Koninklijke Philips N.V. or their respective
owners.
Product highlights
D Note
Audio input limiting threshold is maximum 180 mVSS
• Wake to your iPod, radio station or buzzer
• Listen to your iPod in stereo sound
• Charges your iPod
Disposal of your old product:
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
Please inform yourself about the local separate collection system
for electrical and electronic products.
• Pivoting 30-pin connector
• Battery backup
B
Warnings
• Do not expose the product to rain or water.
• Keep way from sunlight to prevent heat build-up.
• Do not disassemble or repair.
• Keep away from high voltage devices.
Take the package to your local recycling center.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
3. With the dial set to either Alarm On or Alarm Off,
press the ListenTo button until the iPod icon appears.
What’s in the box
Getting started
C Important: Read the safety precautions on page 4
carefully before connecting your Philips iBoom Home.
This section helps you with the first time installation of
your Philips iBoom Home.
4. Click Play on your iPod to enjoy your music in stereo
sound on iBoom Home.
Included
D Note: In the event of a power outage, your iBoom
Home has a battery backup to ensure that the correct
time and alarm settings are maintained.You will need to
install 2 x AA batteries (available separately) into the
battery compartment located on the bottom of the
unit. Be sure to follow the polarity as indicated.
1. Philips iBoom Home DLA77082/79
2. Attached Aux-In Cable
3. Attached Power Adapter
4. Quick Start Guide
5. User Manual
1. Plug your iBoom Home into a wall outlet using the
Attached Power Adapter.
4
2
3
5
2. Insert your iPod into the cradle of your iBoom Home.
D Note: The volume control on your iPod is disabled
while docked. Instead, adjust the volume to the desired
level by pressing theVolume/Hour button on your iBoom
Home.
USER MANUAL
1
1
What you will also need
1. iPod
2
1
3
4
2. AC power outlet
2
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
exact signal reception. Press and hold theTrack/Minute
button to scan to the next station with a stronger signal.
Using iBoom Home
1. Turn the dial located on the top left of iBoom Home to
Alarm On or Alarm Off.
Buttons and controls
1. ALARM/TIME SETTINGS: Turn dial to set theTime
and Alarm Settings.
7. - TRACK/MINUTES +: For iPod, press + or - to select
desired song track, or press and hold to rewind or
fast-forward song. For radio, press + or - to adjust the
radio’s frequency or press and hold to scan to the next
station. For setting the clock or alarm, press + or - to
adjust the minutes.
Turning iBoom Home Off
While listening to iBoom Home, press the ListenTo
button until no listen mode icon is displayed and music
is no longer playing.
2. Dock your iPod if you would like to use iBoom Home to
enjoy the music from your iPod in stereo.
2. SNOOZE/SLEEP: Press to silence the alarm for nine
minutes when in Alarm Mode, or to set Sleep Mode.
3. Press the ListenTo button to select from iPod, Radio
or Aux.
3. DIMMER: Press to dim or brighten the LCD display.
8. PRESETS: Tune to the desired radio station first, then
press and hold the numbered Preset button you want
to save.
4. LISTEN TO: Press to cycle through iPod, Radio or
AUX function.
4. Adjust the volume to the desired level by pressing the
Volume/Hour button.
Settings and features
Setting the Time
5. WAKE TO: Press to select desired function to wake
to buzzer, iPod or radio.
9. 12H/24H (on back of unit): Allows the unit to be set
to either a 12-hour or 24-hour clock.
5. To change the track or tune to a different radio station,
press theTrack/Minute button.
6. -VOLUME/HOUR +: Press + or - to adjust the volume
levels from 0-30, and to adjust the hour when setting
the clock or alarm.
10. -1 +1 DST (on back of unit): Allows the unit to be
quickly adjusted for daylight savings time.
Turn the Dial located on the top left of iBoom Home to
Time Set.To set the hour, use theVolume/Hour button.To
set the minutes, use theTrack/Minute button.The clock will
set to the time shown when you turn the dial to a
different option.
D Note: Your iBoom Home features IR capability, which
means that you can control the radio with an IR remote
control (available separately).
ControllingVolume
D Note: PM only shows on the 12H function.To adjust
5
9
10
4
the 12H/24H function, see back of unit.
1
2
Use theVolume/Hour button to adjust the volume to your
desired level.
6
7
8
Setting the Alarm
D Note: The volume control on your iPod is disabled
while docked. Instead, adjust the volume to the desired
level by pressing theVolume/Hour button on iBoom Home.
Turn the Dial located on the top left of iBoom Home to
Alarm Set. Press theVolume/Hour button to set the hour,
and theTrack/Minute button to set the minutes. Press the
WakeTo button to choose from waking to a Buzzer, iPod,
or AM/FM Radio.Turn the Dial to Alarm On to activate
alarm.When the alarm has been set successfully, the Alarm
Icon will appear on your iBoom Home display.
Controlling the Radio
Press the ListenTo button until the Radio Icon appears on
the LCD screen to indicate Radio Mode.When the radio is
turned on, it will play the frequency that was last used. Use
theTrack/Minute button to select a frequency. Pressing the
Track/Minute button will tune the frequency by 0.05 MHz for
D Note: Make sure to choose one of the three
options (Buzzer, iPod or AM/FM Radio), or no alarm
3
Download from Www.Somanuals.com. All Manuals Search And Download.
9
8
will sound. If iPod is selected but no iPod is docked when
alarm is set to go off, the buzzer will sound instead.
1. Tune to a frequency or station with theTrack/Minute
button.
Warranty and service
Limited One-Year Warranty
Technical data
Press the Snooze/Sleep button to stop the alarm for nine (9)
minutes.The Alarm Icon will flash to indicate the activation of
the snooze function.Turn the dial to Alarm Off to disable the
alarm.
2. Press and hold one of the four Preset buttons to store
the currently displayed frequency.The LCD display will
flash to indicate that the preset has been successfully
stored.
Compatiblity
All iPods with Dock Connector for iPod
Philips warrants that this product shall be free from defects
in material, workmanship and assembly, under normal use, in
accordance with the specifications and warnings, for one year
from the date of your purchase of this product.This warranty
extends only to the original purchaser of the product, and is not
transferable.To exercise your rights under this warranty, you must
provide proof of purchase in the form of an original sales receipt
that shows the product name and the date of purchase.
Output Power
3 Watts/Channel into 6 ohms
3. Repeat steps 1 and 2 to store other frequencies with
the remaining three presets.
Setting the Sleep Timer
Frequency Response
100Hz ~ 20KHz
While listening to iBoom Home, press the Snooze/Sleep
button to set iBoom Home to shut off automatically after 90,
60, 30, or 15 minutes.When the SleepTimer is set, the Sleep
Icon [ZZZ] will be displayed on the LCD.
Connecting Other Audio Devices
Signal To Noise Ratio
>45dB
You can use iBoom Home as an external speaker for
other audio devices using the attached Aux-In Cable
located on the back of iBoom Home. Place your MP3
player on the padded surface to secure it while enjoying
your music in full stereo sound.
For technical support, send us an email with the model number
of the product and a detailed description of your problem to:
EXPRESS OR IMPLIED WARRANTIES. Philips’ liability is limited
to repair or, at its sole option, replacement of the product.
Incidental, special and consequential damages are disclaimed
where permitted by law. This warranty gives you specific legal
rights. You may also have other rights that vary from state to state.
D Notes:
Connections
30-pin iPod Dock
Auxiliary Input:Attached 3.5mm Stereo Mini-jack Cable
•You must press the ListenTo button to use this option.
•To view the sleep time remaining, press the Sleep
button once.
1. Connect the attached Aux-In Cable into the line-out
or headphone jack from your audio device.
•To change the sleep timer during play, press the Sleep
button repeatedly.
•To cancel the sleep timer, press the Sleep button until
the display reads Off and the sleep icon [ZZZ]
disappears.
Power
AC Input: 12VAC ~ 60Hz
DC Output: 10VDC ~ 1400mA
2. Press the ListenTo button until the AUX icon appears.
3. Press Play on your external device to begin listening
to your external device through iBoom Home.
Product Dimensions (width, height, depth)
9.45in x 3.54in x 6.42in / 240mm x 90mm x 163mm
4. Now you can use the audio controls on your external
device and the iBoom Home to adjust the volume to
your desired level.
Product Weight
iBoom Home: 2.75lbs. / 1.25KG / 44oz
AC Adapter: 1.25lbs / .57KG / 20oz
Setting the Dim Level
Press the Dim Level button on the front of the iBoom
Home to set the LCD to high, low or off.
Backup Batteries
Setting Radio Station Presets
In the event of a power outage, your iBoom Home has
a battery backup to ensure that the correct time and
alarm settings are maintained.You will need to install
2 x AA batteries (available separately) into the battery
compartment located on the bottom of the unit. Be sure
to follow the polarity as indicated.
Your iBoom Home can store four (4) radio preset stations
from FM and AM.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
When I unplug my iBoom Home, why aren’t the presets
and clock settings recalled when it powers back up?
Why didn’t my iPod charge while docked in
iBoom Home?
Frequently asked questions
Here you will find the most frequently asked questions and
answers about you’re your Philips iBoom Home.
You may need to replace your back-up batteries. Open the
battery compartment cover and be sure to follow the
polarity symbols as indicated.Then, snap the compartment
cover back on and press the Reset button (located on the
back of your iBoom Home).
You must plug iBoom Home into AC power in order to
charge your iPod. Also, check to see that your iPod is
properly docked. Remove your iPod from the dock and
check for any obstruction to the connector in the cradle
and on your iPod.Then re-dock your iPod.
919-573-7854 in North America.To keep the warranty valid,
never try to repair the system yourself. If you encounter
problems when you use your iBoom Home, check the
following points before you contact Philips. If the problem
remains unsolved, go to the Philips website
Why does my music sound overdriven or distorted?
D Note: Your iBoom Home will return to the factory
settings and you will lose all stored information.
1. The volume may be set too high. Decrease the volume on
your iBoom Home.
www.philips.com/support or contact Philips at 919-573-7854
in North America.When you contact Philips, make sure that
your Philips iBoom Home is nearby and the model number
and serial number are available.
2. The audio sound may be distorted. If the original audio
source (MP3) is of poor quality, distortion and noise are
easily noticed with high volume.
3. The EQ setting on your iPod may need to be adjusted for
optimum quality.
Why doesn’t my iPod respond to iBoom Home when
docked?
D Note: Because the volume output on your iPod cannot
be controlled when docked, you can only control volume
using the controls on iBoom Home.
1. Your iPod may not be docked properly. Remove your iPod
from the dock and check for any obstructions to the
connector in the cradle and on your iPod.Then re-dock
your iPod
Why isn’t my iBoom Home responding?
Your iBoom Home may need to be reset.To do so, press and
hold the Reset button (located on the back of your iBoom
Home) with a paper clip or similar object.
2. Your iPod software may need to be updated.To upgrade
software on your iPod, please visit:
D Note: Your iBoom Home will return to factory settings
and you will lose all stored information.
3. Your iPod may be frozen and will not respond. Please
make sure your iPod is working properly before docking
into iBoom Home.You may need to reset your iPod, to
do this press and hold the Menu and Center buttons on
your iPod for 10-12 sec. until your iPod resets. Please
refer to your iPod manual for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
Made in China
Download from Www.Somanuals.com. All Manuals Search And Download.
14
15
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved.
M-DLA77082/79-081008-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|