Operating Instructions
Blu-ray Disc Home Theater Sound System
Model No. SC-BT735
SC-BT330
SC-BT230
The illustration shows the image of the unit SC-BT735.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Model number suffix “EB” denotes UK model.
VQT2Q52
EB EP
Download from Www.Somanuals.com. All Manuals Search And Download.
Before use
Remove the connector cover.
Caution for AC Mains
Lead
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug fitted
and follow the instructions below.
(For the United Kingdom and Republic of Ireland)
For your safety, please read the following text carefully.
Illustrations may differ from actual AC mains plug.
This appliance is supplied with a moulded three pin mains plug
for your safety and convenience.
1
Open the fuse cover with a screwdriver.
Figure A
Figure B
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Fuse cover
Check for the ASTA mark Ï or the BSI mark Ì on the body of
the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
2
Replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF
AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY
13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black or
Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or
Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL Ó OR COLOURED GREEN
OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
VQT2Q52
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Information for Users on Collection and Disposal of
Old Equipment and used Batteries
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries should not be mixed with general
household waste.
Placement
Set the unit up on an even surface away from direct sunlight,
high temperatures, high humidity, and excessive vibration.
These conditions can damage the cabinet and other
components, thereby shortening the unit’s service life. Do not
place heavy items on the unit.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points, in
accordance with your national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you
will help to save valuable resources and prevent any
potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.
Voltage
Do not use high voltage power sources. This can overload the
unit and cause a fire. Do not use a DC power source. Check
the source carefully when setting the unit up on a ship or other
place where DC is used.
For more information about collection and recycling of old
products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
AC mains lead protection
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the
lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock. Do not handle the plug
with wet hands. This can cause electric shock.
For business users in the European
Union
If you wish to discard electrical and
electronic equipment, please contact your
dealer or supplier for further information.
[Information on Disposal in other Countries outside the
European Union]
Foreign matter
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
These symbols are only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Do not let liquids get into the unit. This can cause electric
shock or malfunction. If this occurs, immediately disconnect
the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Service
Cd
Directive for the chemical involved.
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these instructions occurs,
disconnect the AC mains lead and contact your dealer or an
authorized service centre. Electric shock or damage to the unit
can occur if the unit is repaired, disassembled or reconstructed
by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
VQT2Q52
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Caution for AC Mains Lead ............................... 3
Safety precautions ............................................. 4
Getting started
TV
Accessory .......................................................... 6 Enjoying TV with unit’s speakers .....................30
•Surround sound effects .................................................. 30
•Sound modes ................................................................. 30
•Making settings for digital audio input ............................ 30
Unit and media care .......................................... 7
Using the remote control ................................... 7
Control reference guide ..................................... 8
•Remote control .................................................................8
•Main unit (Front) ...............................................................9
•Main unit (Rear) ................................................................9
Linked operations with the TV
(VIERA Link “HDAVI ControlTM”) ......................31
•Setting the audio link ...................................................... 31
•Easy control only with VIERA remote control ................ 32
Playable discs/Cards/USB devices ................. 10
STEP 1: Preparing the speakers ..................... 12
•Assembling the speakers ...............................................12
•Speaker assembly option ...............................................13
Other devices
STEP 2: Positioning ........................................ 14
Using the iPod/iPhone .....................................32
•iPod/iPhone Connection ................................................ 32
•iPod/iPhone Playback .................................................... 33
STEP 3: Connections ...................................... 15
•Speaker cable connection ..............................................15
•Radio antenna connection ..............................................15
•Connection to a TV .........................................................16
•Connection to a broadband network ...............................18
Advanced operations
STEP 4 : AC mains lead connection ............... 18
Enjoying VIERA CAST .....................................34
Playback menu ................................................34
DLNA feature ...................................................36
Setup menu .....................................................37
•Speaker settings ............................................................ 41
STEP 5: Smart setup / Easy setup .................. 19
•Network Easy Setting ....................................................20
•Firmware updating ..........................................................21
STEP 6:
Reprogramming the remote control ................. 22
Inserting or removing a media ......................... 22
START menu ................................................... 23
Enjoying sound effects from all speakers ........ 24
•Enjoying surround sound effects ....................................24
Optional speaker settings
Speaker installation option ...............................42
Playback
Reference
Playing video contents .................................... 25
•Other operations during play ..........................................25
•Useful functions ..............................................................26
•Enjoying BD-Live or BONUSVIEW in BD-Video .............26
•Regarding DivX ..............................................................27
Troubleshooting guide .....................................43
Messages ........................................................45
About MP3/JPEG/DivX/
AVCHD/MPEG2 files .......................................46
Supplemental information................................ 47
Glossary ...........................................................49
Specifications ...................................................50
Index ................................................. Back Cover
Playing music .................................................. 27
Playing still pictures ......................................... 28
•Useful functions ..............................................................28
Radio
Listening to the Radio ...................................... 29
•Presetting stations automatically ....................................29
•Presetting stations manually ...........................................29
•Listening/confirming the preset channels .......................29
•RDS broadcasting ..........................................................29
VQT2Q52
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Indicates features applicable to:
SC-BT735 only
≥ These operating instructions are applicable to models
[BT735]:
SC-BT735, SC-BT330 and SC-BT230. Unless otherwise
indicated, illustrations in these operating instructions
are of SC-BT735.
: SC-BT330 only
[BT330]
SC-BT230 only
[BT230]:
≥ Operations in these instructions are described mainly
with the remote control, but you can perform the
operations on the main unit if the controls are the
same.
System
SC-BT735
SA-BT735
SC-BT330
SC-BT230
SA-BT230
SB-HF230
SB-HC230
SB-HS230
SB-HW480
Main unit
SA-BT330
SB-HF330
SB-HC230
SB-HS230
SB-HW330
Speaker system
Front speakers
Centre speaker
Surround speakers
SB-HF730
SB-HC730
SB-HS735
SB-HW330
Subwoofer
≥Some models may not be on sale in certain regions.
≥Some accessories and external devices mentioned in these operating instructions that are not included with this
product may not be on sale in certain regions.
Accessory
Check the supplied accessories before using this unit.
[BT735] [BT330] [BT230]
∏
1 Remote control
∏
2 Batteries for
remote control
∏
1 Video cable
∏
1 FM indoor antenna
∏ 1 Antenna plug
adaptor
(N2QAKB000090)
(K2KA2BA00001)
(RSAX0002)
(K1YZ02000013)
For the United Kingdom
and Republic of Ireland
∏
1 Sheet of speaker
cable stickers
∏
Speaker cable (centre)
[REEX1154]
with green connector
∏
1 AC mains lead
[BT230]
(RFAX1022)
(RFAX0024)
∏
Speaker cables
(front)
(surround)
[REEX1155]
with grey connector
[REEX1156]
with blue connector
[REEX1152A]
with red connector
[REEX1153A]
with white connector
For the United Kingdom
and Republic of Ireland
For Continental Europe
[BT735]
1 Auto speaker setup
∏
4 Speaker stands
(with cable)
∏
4 Bases
∏
8
Screws
∏
(RYK1610-K)
(XTN5+10FFJK)
microphone
(L0CBAY000051)
[RYK1609-K]
with white connector
[RYK1609A-K]
[RYK1609C-K]
with grey connector
[RYK1609B-K]
4 Screws
with red connector
with blue connector
(XYN5+J16FJK)
[BT330]
∏
2 Speaker stands
(with cable)
∏
Speaker cables
(surround)
[REEX1155]
with grey connector
[REEX1156]
with blue connector
∏
2 Bases
∏
8
Screws
∏
1 Auto speaker setup
microphone
(RYPX0389-K)
(XTN5+10FFJK)
[RYPX1041-KL]
(L0CBAY000051)
with white connector
[RYPX1041-KR]
with red connector
≥ Product numbers correct as of December 2009. These may be subject to change.
≥ Do not use AC mains lead with other equipment.
VQT2Q52
6
Download from Www.Somanuals.com. All Manuals Search And Download.
≥ Or go on line through our Internet Accessory ordering application at
≥ Most major credit and debit cards accepted.
≥ All enquiries transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
≥ It couldn’t be simpler!
≥ Also available through our Internet is direct shopping for a wide range
of finished products, take a browse on our website for further details.
\For\the\United\Kingdom\and\Republic\of\Ireland\customers\
∫ Sales and Support Information
Customer Care Centre
≥ For customers within the UK: 0844 844 3852
≥ For customers within the Republic of Ireland: 01 289 8333
≥ Visit our website for product information
≥ E-mail: [email protected]
Direct Sales at Panasonic UK
≥ For customers: 0844 844 3856
≥ Order accessory and consumable items for your product with ease
and confidence by phoning our Customer Care Centre
Monday–Thursday 9:00 a.m.–5:30 p.m., Friday 9:30 a.m.–5:30 p.m.
(Excluding public holidays)
Unit and media care
Using the remote
control
∫ Clean this unit with a soft, dry cloth
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Insert so the poles (i and j) match those in the remote
control.
∫ Clean the lens with the lens cleaner
Lens cleaner: RP-CL720E
≥ This lens cleaner may not be available for sale in all
countries, e.g. not available in Germany, please consult
your Panasonic dealer for advice.
≥ This lens cleaner is primarily for use on Panasonic DVD
recorders (DIGA), but it is also suitable for use on this unit.
R6/LR6, AA
(Alkaline or manganese
batteries)
∫ Clean discs
Point it at remote control signal sensor on this unit. (> 9)
DO
DO NOT
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for
a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
≥ Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or
labels (rented discs etc).
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
jDiscs that are badly warped or cracked.
jIrregularly shaped discs, such as heart shapes.
∫ To dispose or transfer this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (> 43, “To return to the factory
preset.”)
≥ The operation history may be recorded in the memory of this
unit.
VQT2Q52
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
13
Remote control
TV
1
2
VOL
1
2
3
Turn the unit on and off (> 19)
Display the Home screen of VIERA CAST (> 34)
Select title numbers, etc./Enter numbers or characters
(> 34)
[CANCEL] : Cancel
Basic playback control buttons (> 25)
Select preset radio stations (> 29)
Show status messages (> 25)
Show Top Menu/DIRECT NAVIGATOR (> 25)
[3, 4, 2, 1]: Menu selection
AV
abc
def
1 2 3
VOL
14
15
ghi
jkl
mno
4 5 6
3
4
5
6
7
8
p
w
qrs
tuv
xyz
7 8 9
MUTE
CANCEL
BD/SD
SEARCH
PIP
0
16
17
RADIO
EXT-IN
iPod
[OK]: Selection
[2, 1]: Select preset radio station (> 29)
[2] (2;), [1] (;1): Frame-by-frame (> 25)
Show OPTION menu (> 26)
SEARCH
PLAY
4
5
18
9
SLOW
10 Coloured buttons (red, green yellow, blue)
These buttons are used when;
SKIP
SKIP
PAUSE
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens.
(> 28)
STOP
A
STATUS
EXIT
6
19
20
≥ Operating contents of VIERA CAST (> 34)
11 Set the sound mode (> 24)/Select speaker channel
(> 24)
12 Select surround sound effects (> 24)
13 TV operation buttons
N
R
I
7
8
9
21
T
D
OK
You can operate the TV through the unit’s remote control.
[Í]: Turn the television on and off
[AV]: Switch the input select
OPTION
RETURN
AUDIO
22
[i j VOL] : Adjust the volume
10
11
12
SOUND SURROUND DISPLAY
14 Adjust the volume of the main unit
15 Mute the sound
23
24
-
CH SELECT
-
SLEEP
≥ “MUTE” flashes on the unit’s display, while the function is
on.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled if the unit is turned off.
16 Switch on/off Secondary Video (Picture-in-picture) (> 26)
17 Select the source
[BD/SD]: Select disc drive or SD card drive (> 23)
[iPod]: Select iPod/iPhone as the source (> 23, 33)
[RADIO/EXT-IN]: Select FM tuner, USB or external audio
as the source (> 23, 29, 30)
18 Select radio stations manually (> 29)
19 Exit the menu screen
20 Show START menu (> 23)
21 Show Pop-up menu (> 25)
22 Return to previous screen
23 Select audio (> 25)
24 Show Playback menu (> 34)/Set the sleep timer
1
2
Press and hold [jSLEEP].
While “SLEEP ££” is displayed, press [jSLEEP]
several times to select the time (in minutes).
≥ Timer selection is up to 120 minutes.
≥ Select “OFF” when cancelling the setting.
≥ To confirm the remaining time
Press and hold the button again.
VQT2Q52
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Main unit (Front)
e.g., [BT735]
1
2
4
5
3
VOLUME
OPEN/CLOSE
iPod
Pull open.
SD CARD
SETUP MIC
SELECTOR
1
2
Standby/on switch (Í/I) (> 19)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
8
9
USB port (> 22)
[BT735] [BT330] Connect Auto speaker setup microphone
10 Display (FL display)
≥ “SRD” (SURROUND) lights when sound is output to the
surround speakers.
Power indicator
The indicator lights when this unit is turned on.
Connect iPod/iPhone (> 32)
Adjust the volume of the main unit
Open or close the disc tray (> 22)
Disc tray
11 Remote control signal sensor
Distance: within approx. 7 m.
Angle: Approx. 20e up and down, 30e left and right
12 Select the source (> 23)
13 Stop (> 25)
3
4
5
6
7
SD card slot (> 22)
14 Start play (> 25)
∫ If the front cover comes off
1
2
3
Hold rear side of main unit by one hand and match up left
or right side protruding hook on the cover first with the
corresponding slot on the unit.
Push the hook firmly towards the unit until it clicks into
place. Then push the succeeding hooks one by one until
all have clicked into place.
Check that the cover now moves correctly.
≥ If it does not, remove it and repeat the above procedure.
Main unit (Rear)
1
2
3
4
5
6
7
8
DIGITAL AUDIO IN
OPTICAL
AC IN
DIGITAL TRANSMITTER
L
1
2
AV
OUT
LAN
R
6
Ω
5
2
R
1
L
4
R
3
L
6
6
Ω
3
Ω
3
Ω
VIDEO
OUT
(
10BASE-T/
WIRELESS
LAN
FM ANT
AUX
SUBWOOFER CENTER FRONT SURROUND
100BASE-TX
)
(ARC)
(75Ω)
9
10 11
1
2
3
4
5
6
AC IN terminal (> 18)
Speaker terminals (> 15)
Cooling fan
USB port for optional wireless adaptor (> 18)
HDMI AV OUT terminal (> 17)
8
9
Digital transmitter dock (> 14)
Connect a digital transmitter when using an optional
wireless system.
LAN port (> 18)
10 VIDEO OUT terminal (> 16)
11 AUX terminal (> 16)
FM radio antenna terminal (> 15)
7
DIGITAL AUDIO IN terminals (> 16 , 17)
Terminal 1 is designated for connection with the TV.
Terminal 2 can be used with equipment other than the
STB.
VQT2Q52
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable discs/Cards/USB devices
Type
Logo examples
Type detail
Playable contents*
BD-Video
Video
Video
JPEG
BD-RE
BD-R
[BD]
Video
DivX®
DVD-Video
DVD-RAM
DVD-R
Video
Video
AVCHD
JPEG
Video
AVCHD
DivX
[DVD]
MP3
JPEG
DVD-R DL
DVD-RW
+R/+RW/+R DL
Music CD
Video
AVCHD
—
—
Music [CD-DA]
DivX
Music [CD-DA]
MP3
[CD]
CD-R
CD-RW
JPEG
SD Memory Card (8 MB to 2 GB)
(Includes miniSD Card and microSD Card)
SDHC Memory Card (4 GB to 32 GB)
(Includes microSDHC Card)
MPEG2
AVCHD
[SD]
SDXC Memory Card (48 GB, 64 GB) JPEG
(Includes microSDXC Card)
(as of December 2009)
DivX
USB device
MP3
[USB]
—
(up to 128 GB)
JPEG
* See page 11, 46–47 for more information on the types of content that can be played.
VQT2Q52
10
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Discs that cannot be played in this unit
∫ SD card
Any other disc that is not specifically supported or
previously described.
≥ 2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ HD DVD
≥ MiniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but
must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
customer provided.
≥ Keep the Memory Card out of reach of children to
prevent swallowing.
≥ To protect the card’s contents, move the record prevention
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code “B”.
Example:
≥ Useable memory may be slightly less than the card capacity.
∫ USB device
≥ This unit supports connecting a USB memory, digital camera
and video camera produced by Panasonic, etc. It is not
warranted that all USB devices will work with this unit.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “2” or “ALL”.
Example:
1
2
2
ALL
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play on
this unit. Please refer to the recorder’s instructions.
∫ BD-Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio and DTS-HD Master
Audio) adopted in BD-Video. In order to enjoy these audio
formats, refer to page 38.
∫ Music CD
Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files
were created.
≥ The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read
the disc’s instructions carefully.
VQT2Q52
11
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: Preparing the speakers
Assembling the speakers
[BT735] [BT330]
Preparation
Caution
≥ To prevent damage or scratches, lay down a soft cloth and
≥ Do not stand on the base. Be cautious when children are
perform assembly on it.
near.
≥ For wall mount, refer to page 42.
≥ Keep the screws out of reach of children to prevent
swallowing.
≥ When carrying speakers, hold the stand and base parts.
[BT735]
[BT330]
2 Front speakers
2 Surround speakers
4 Stands (with cables)
4 Bases
2 Front speakers
2 Stands (with cables)
2 Bases
8 Screws
8 Screws A
4 Screws B
A
B
[BT735]
Back of the base
1
Pull the cable
straight along
the line and
slide into the
groove.
Tighten
securely.
Screw A
2
1
2
Insert the wire fully.
r: White
s: Blue line
Push!
Press into the groove.
Screw B
Tighten securely.
Leave about 80 mm
[BT330]
1
Slide into the groove.
Screw
Tighten securely.
2
2
Insert the wire fully.
r: White
s: Blue line
Push!
Position the cable
Press into the groove.
Tighten securely.
between the ridges.
1
VQT2Q52
Leave about 120 mm
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the speaker cables. Insert the wire fully,
taking care not to insert beyond the wire insulation.
e.g. Surround speaker [BT230]
Use of the speaker cable stickers is convenient
when making cable connections.
e.g. Front speaker (L)
4
3
FRONT
Lch
r: White
s: Blue line
A
B
Speaker cable sticker (included)
Connector
Speaker cable sticker
Colour
Push!
1
2
3
4
5
6
FRONT (L)
WHITE
RED
FRONT (R)
SURROUND (L)
SURROUND (R)
CENTRE
BLUE
GREY
GREEN
PURPLE
≥ Be careful not to cross (short-circuit) or reverse the polarity of the
speaker wires as doing so may damage the speakers.
≥ Don’t use a front speaker as a surround speaker or vice versa. Verify
the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
SUBWOOFER
Be sure to match the number on each sticker with the
connector colour.
≥ To avoid injury by falling or dropping the speaker, place the speaker cables
with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the
speaker when carrying.
Speaker assembly option
[BT330]
Thread the speaker cable
through the base.
Attach the speaker.
Insert the wire fully.
Push!
Leave about 120 mm
r: White
s: Blue line
Press into the groove.
Tighten securely.
Slide into the
groove.
You can remove and use the cable from
the stand. To reattach the cable, refer to
page 42.
[BT735] [BT330]
∫ Preventing the speakers from falling
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.
e.g., [BT735]
A
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
Screw eye (not included)
Wall
B
C
D
E
Approx.150 mm
VQT2Q52
13
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: Positioning
Caution
≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
≥ Do not attempt to attach these speakers to walls using methods other than those described in this
manual.
≥ Do not touch the front netted area of the speakers. Hold by the sides.
How you set up your speakers can affect the bass and the sound field.
Setup example
∫ If irregular colouring occurs on your TV,
Place the front, centre, surround speakers at approximately
turn the TV off for about 30 minutes.
the same distance from the seating position.
The angles in the diagram are approximate.
If it persists, move the speakers further away from the TV.
[BT735] [BT330]
∫ Upgrade your system to 7.1-channel
Using “Auto Speaker Setup” (> 19) is a convenient way to get
the ideal surround sound from your speakers when you are
unable to place them.
system
The main unit is designed to enjoy the 7.1ch surround sound.
By connecting 2 units of the Panasonic wireless system
SH-FX71 with 4 speakers, more theatre-like effect can be
available.
≥ Keep your speakers at least 10 mm away from the system for proper
ventilation.
Necessary equipment:
≥ 2 optional wireless systems (SH-FX71)
≥ 2 additional speakers
[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]
60°
For more details, refer to the operating instructions for the
optional wireless system.
120°
A
Centre speaker
Put on a rack or shelf. Vibration caused by the speaker can
disrupt the picture if it is placed directly on the TV.
B
C
D
Front speakers
Subwoofer
Surround speakers
≥ Place the speakers at the same height or higher than ear
level.
You can enjoy surround speaker
sound wirelessly when you use the
optional Panasonic wireless
accessory (SH-FX71).
For more details, refer to the operating
instructions for the optional wireless
system.
≥ Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥ You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
≥ Positioning speakers in front
It is possible to locate all the speakers in front of the listening position.
However, the optimal surround sound effect may not be obtainable.
≥ Place speakers on flat secure bases.
≥ Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
≥ For optional wall mount, refer to page 42.
VQT2Q52
14
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: Connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Speaker cable connection
Connect to the terminals of the same colour.
6 PURPLE Subwoofer
When using the optional wireless
system, do not attempt to connect
any extra surround or surround
back speakers to the main unit.
5 GREEN Centre speaker
2 RED
Front speaker (Rch)
Front speaker (Lch)
1 WHITE
4 GREY
3 BLUE
Surround speaker (Rch)
Surround speaker (Lch)
AC IN
+
Main unit
6
5
2
1
L
4
3
L
R
R
6
Ω
6
Ω
3
Ω
3Ω
SUBWOOFER CENTER FRONT SURROUND
Radio antenna connection
Using an indoor antenna
Main unit
A
B
FM indoor antenna (included)
Adhesive tape
Affix this end of the antenna where reception is best.
FM ANT
(75
)
Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
e.g.,
Main unit
A
FM outdoor antenna [Using a TV antenna
(not included)]
FM ANT
The antenna should be installed by a competent technician.
75 ≠ coaxial cable (not included)
Antenna plug adaptor (United Kingdom and Republic of Ireland
only)
(
Ω
75 )
B
C
≥ Keep the adaptor out of reach of children to prevent swallowing.
VQT2Q52
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV
The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize
your system setting.
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥Turn off all equipment before connection.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
∫ OPTICAL IN
≥ After making the digital audio connection, make settings to
suit the type of audio from your digital equipment (> 30).
use Panasonic’s HDMI cable. When outputting 1080p signal,
please use HDMI cables 5.0 meters or less.
Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
∫ HDMI
The HDMI connection supports VIERA Link “HDAVI Control”
(> 31) when used with a compatible Panasonic TV.
Basic connection
VIDEO IN
TV
AUDIO IN
L
AUDIO OUT
L
R
R
AUX
A
B
Video cable (included)
Audio cable (not included)
L
R
VIDEO
OUT
AUX
VIDEO OUT
≥To enjoy TV audio from this home theatre system’s speakers, select “AUX (TV)” as a source (> 23).
Connection for the better audio
VIDEO IN
TV
OPTICAL
OUT
AUDIO IN
L
R
DIGITAL AUDIO IN
OPTICAL
1
A
B
Video cable (included)
2
Optical digital audio cable (not included)
OPTICAL 1
VIDEO
OUT
VIDEO OUT
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 1 (TV)” or “D-IN 1” as a source.
e.g.,
If the TV does not have a VIDEO IN terminal, connect using
a Scart adaptor (Scart—VIDEO IN).
VIDEO IN
A
B
Scart adaptor (not included)
Video cable (included)
VQT2Q52
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection for the best picture and audio
TV
OPTICAL
OUT
AV IN
A
B
HDMI cable (not included)
Optical digital audio cable (not included)
≥ For the TV audio, an audio cable (not included) can be also
used by connecting the AUX terminal with the AUDIO OUT
terminal on the TV.
D
IGIT
A
L
AUDIOIN
O
O
PT CAL
L
1
2
AV
OUT
R
OPTICAL 1
(ARC)
HDMI AV OUT (ARC)
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 1 (TV)” or “D-IN 1” as a source (> 23).
ARC (Audio Return Channel)
(Available when using an ARC compatible TV)
With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cables.
≥Select “ARC (TV)” as the audio input source (> 23)
≥Refer to the operating instructions of the TV for the settings to output digital audio.
Connection with Set Top Box, etc.
Refer to the operating instructions of the respective
devices for the optimal connections.
TV
OPTICAL
OUT
DIGITAL AUDIO IN
OPTICAL
DIITAL TRASMITTE
L
1
2
A
B
Optical digital audio cable (not included)
Set Top Box, cable TV, VCR, DVD recorder, etc.
R
OPTICAL 2
W
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 2 (CABLE/SAT)” or “D-IN 2” as a source
(> 23).
NECESSARY SETTINGS
≥ “HDMI Audio Output” : “Off” (> 39)
VQT2Q52
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a broadband network
The following services can be used when this unit is connected
to broadband.
For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ Firmware can be updated (> 21)
≥ You can enjoy the BD-Live (> 26)
≥ You can enjoy VIERA CAST (> 34)
≥ DLNA feature (> 36)
≥ The unit is not compatible with public wireless LAN services
(Hotspot etc.) provided in airports, stations, cafes etc.
∫ Using LAN (ethernet) cable
∫ Using Wireless LAN Adaptor (optional)
LAN
(
O
10BASE-T/
WIRELESS
LAN
)
100BASE-TX
≥ Only the Wireless
LAN Adaptor
DY-WL10 (optional)
can be used.
A
LAN Cable [Straight]
(not included)
Broadband router, etc.
Internet
A
B
C
Wireless LAN Adaptor
Wireless router (Access point), etc.
Internet
B
C
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
≥ Read the operating instructions for the Wireless LAN
Adaptor DY-WL10 (optional) thoroughly when using it.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
STEP 4: AC mains lead connection
\For\the\United\Kingdom\and\Republic\of\Ireland\only\
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
AC IN
≥ Connect only after all other connections are complete.
≥ The main unit consumes a small amount of AC power, even
Main unit
A
B
AC mains lead (included)
To a household mains
socket
when it is turned off (When the “Quick Start” setting is “Off”,
[BT735] [BT330]: approx. 0.1 W, [BT230]: approx. 0.2 W). In the
interest of power conservation, if you will not be using this
unit for a long time, unplug it from the household mains
socket.
≥ Do not use any other AC mains lead except the supplied one.
VQT2Q52
18
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 5: Smart setup / Easy setup
The Smart setup/Easy setup assists you to make
necessary settings.
Follow the on-screen prompts to make basic settings for the
system.
[BT735] [BT330]: Smart setup
[BT230]: Easy setup
1 Press [Í].
2 Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
Wireless System
If a digital transmitter is inserted,
it is required to specify the current settings.
Speakers position
Specify the positioning of the surround speakers.
[BT230]: Speaker check
Check if the connection to each speaker is valid.
OK
[BT735] [BT330]: Auto Speaker Setup
OK
Adjust the speaker output level automatically.
Speaker Output
Make surround sound setting for speaker output.
Cinema Surround
The function creates the sound of virtual speakers to
enhance the realistic surround feeling as if the sound
comes from all directions.
(Speakers position: Surround Layout only)
(Effective when playing video with 5.1/7.1ch audio)
Preparation
≥ Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to
this unit.
TV Audio
Select the audio input connection from your TV,
[item with “(TV)”].
≥ [BT735] [BT330]: Place the Auto speaker setup microphone at
the actual seating position. (At ear level when seated.)
Quick Start
Speed of startup from standby mode is increased.
e.g., [BT735]
SETUP MIC
3 Press [OK] several times to finish the
“Smart setup” or “Easy setup”.
After completing “Smart setup” or “Easy setup”, you can
perform “Network Easy Setting”.
≥ You can perform this setup anytime by selecting “Smart setup” or “Easy
setup” in the Setup menu. (> 40)
≥ Language and TV Aspect settings are automatically retrieved if this unit is
connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later
via an HDMI cable.
≥ Keep as quiet as possible during the Auto speaker setup. Excessive
background noise may lead to incorrect settings.
≥ The speakers output loud test signals during setup.
≥ After the Smart setup is completed, unplug the Auto speaker setup
microphone and keep it for future use.
VQT2Q52
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press [RETURN] and then press [OK].
Then select an item on the following screen which
corresponds to the authentication type noted down in step
1 (> left).
Network Easy Setting
Select “Wired” or “Wireless” and press [OK].
Network Easy Setting (Connection Test)
Select a connection mode.
Access Point Connection Setting
Select authentication type.
Current setting
:
Wired
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
WPA2-PSK (AES/TKIP)
WPA-PSK (AES/TKIP)
Open/Shared Key (WEP)
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select “Wireless”.
Open system
Wired
Wireless
OK
RETURN
Follow the on-screen instructions to make the settings.
≥ Input your encryption key code in “Encryption Key”
supplied with your Wireless router (Access point).
∫ “Wired” connection
Follow the on-screen instructions to make your connection
settings.
≥ When you experience problems (> right)
When you experience
problems with settings
∫ “Wireless” connection
If you select “Wireless” and “Wireless LAN Adaptor is not
connected.” is displayed, check that the Wireless LAN Adaptor
is fully inserted. Alternatively, disconnect and reconnect it. If
there is still no change in the display, consult your dealer for
advice.
Access Point Connection Setting
Access Point Connection Setting
Failed to connect to the access point.
A conflict with other devices occurred.
Do you wish to setup Access Point
Connection Setting again ?
Select “WPS (PUSH button)” or “Search for
access point” and then follow the on-screen
instructions and make the settings.
Yes
OK
No
Access Point Connection Setting
Select a connection method for access to
Wireless LAN.
Please refer to the operating instructions of
the access point about connection methods.
Display
Check the following
WPS (PUSH button)
A conflict with another
device occurred.
≥ Please wait a few moments,
and then try again.
Search for access point
A time out error occurred. ≥ Setting of the Wireless
router (Access point) for
WPS (PUSH button):
e.g.,
If your Wireless router (Access point)
supports WPS (PUSH button), you can
easily perform the settings by pressing
WPS button on it.
WPS (Wi-Fi Protected Setup) is a
standard that facilitates settings relating
to the connection and security of
wireless LAN devices.
MAC Address etc.
≥ The signal may be weak.
Using the USB extension
cable supplied with the
1
An authentication error or a
Wireless LAN Adaptor,
time out error occurred.
adjust the position of the
Wireless LAN Adaptor.
≥ The SSID*2 and the
encryption key of the
Wireless router (Access
point).
1
Press WPS button or corresponding button of Wireless
router (Access point) until the lamp starts flashing.
≥ For details, refer to the operating instruction of Wireless
router (Access point).
≥ Please wait a few moments,
and then try again.
2
Press [OK].
*1 Wi-Fi Protected Setup-compatible Wireless router (Access point) may
have the mark.
A device error occurred.
≥ Connection of Wireless LAN
Adaptor
Search for access point:
If there is no improvement in
symptom, consult your
dealer.
Available Wireless routers (Access points) are searched and
listed. You can select the one to use from the list.
1
Press [3, 4] to select SSID*2 of Wireless router (Access
point) you want to connect with. Then press [OPTION] to
show information of the selected router, make a note of the
authentication and encryption type.
Access Point Connection Setting
Select an access point to connect with.
To search for access point again, please
select "Search again" below.
SSID
Reception
XXXXXXXXXX
XXXXXXXXXX
XXXXX
SSID
:XXXXXXXXXXXXXXX
:802.11n/g/b (2.4GHz)
:WPA-PSK
XXXXX
Wireless type
XXXXX
Authentication type
XXXXX
XXXXX
E
n
c
r
yption type
:AES
VQT2Q52
XXXXXX
Search again
20
≥ If you can not find the SSID*2, select “Search again”.
Download from Www.Somanuals.com. All Manuals Search And Download.
≥ After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router (Access point) might change. When you have
trouble getting online on your PC, perform the network settings of your PC
in accordance with the settings of Wireless router (Access point).
Network Easy Setting (Connection Test)
Network Easy Setting (Connection Test)
Complete.
1. LAN cable connection
: Fail
: Fail
: Fail
2. IP address setting
*2 This is a name given to identify specific networks among wireless LANs.
When the SSID is the same in two devices, data can be transmitted
between them.
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
Select “No” and press [OK] to finish Network
Easy Setting.
Yes
OK
No
Firmware updating
Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
Check the
following
Display
1. LAN cable connection or :Fail
Connection to access point
≥ Connectionof
the LAN
cables
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
2. IP address setting
:Fail
:Fail
(> 18)
3. Connection to gateway
Firmware Update
1. LAN cable connection or
Connection to access point
≥ Connection
and settings
of the hub
and router
≥ Settings of
“IP Address /
DNS
:Pass
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
2. IP address setting
:Fail
:Fail
3. Connection to gateway
1. LAN cable connection or
Connection to access point
:Pass
Yes
No
Settings”
(> 40)
OK
:Home
network
RETURN
2. IP address setting
available
3. Connection to gateway
:Fail
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
(This site is in English only.)
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Pass
:Fail
3. Connection to gateway
To show the firmware version on this unit. (> 40, “System
Information”)
Network Easy Setting (Internet Connection Test)
Network Easy Setting (Internet Connection Test)
Complete.
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the
unit’s display. Unit will restart and the following screen will be
displayed.
- Connection to the Internet
:
Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
The firmware has been updated.
Current Installed Version: x.xx
OK
OK
Display
Check the following
RETURN
Cannot find the server. ≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (> 40)
(B019)
≥ You can perform update anytime by selecting “Firmware Update” in the
Setup menu. (> 40)
≥ Downloading will require several minutes. It may take longer or may not
work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (> 40)
Failed to connect to
the server.
(B020)
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (> 40) and the router
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 40)
≥ You can redo these settings individually using “Network Settings”. (> 40)
≥ Do not connect to a wireless network for which you do not have usage
rights. Wireless networks for which you do not have usage rights (SSID*2)
may appear during the automatic search for a wireless network
environment. However, if you connect, there is a risk that it will be regarded
as illegal access.
VQT2Q52
21
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 6:
Reprogramming the
Inserting or removing a
media
remote control
When other Panasonic products respond to this
remote control
Change “Remote Control” (> 40) on the main unit and the
remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
SD CARD
SETUP MIC
To change the code on the main unit.
1 While stopped, press [START].
2 Press [3, 4] to select “To Others” and
press [OK].
3 Press [3, 4] to select “Setup” and press
[OK].
≥ When inserting a media, ensure that it is facing the right way
up.
≥ While the reading indicator is displayed, do not turn off the
unit or remove the media. Such action may result in loss of
the media’s contents.
≥ When removing the SD card, press on the centre of the card
and pull it straight out.
≥ If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on connected
equipment. For details, refer to the instructions for the
connected equipment.
4 Press [3, 4] to select “General” and press
[OK].
5 Press [3, 4] to select “Remote Control”
and press [OK].
6 Press [3, 4] to select the code (1 or 2) and
press [OK].
To change the code on the remote control.
1
While pressing [OK]
∫ To switch sources
Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or
“USB”.
≥ If a media is inserted while the unit is stopped, the source
switches automatically depending on the inserted media.
Press and hold the numbered button (1 or
2), which has the same number you
selected in the step 6 for more than 5
seconds.
2 Press [OK].
VQT2Q52
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playlists:
You can play playlists
created on DVD-VR.
START menu
Major functions of this unit can be operated from the START
menu.
To Others
Setup: (> 37)
Card Management: (> 26)
1 Press [START].
2 Press [3, 4] to select the item and press
To exit the screen
Press [START].
[OK].
e.g., BD-Video
∫ Selecting the source by the remote control
Home Cinema
START
BD-Video
Playback
Button
BD/SD
Source
Top Menu
BD/DVD or SD card (SD) (> 25)
Network
iPod (IPOD) (> 32)
iPod
Input Selection
Sound(Equalizer)
To Others
FM Radio (FM) (> 29)
AUX*1 (> 30)
USB (> 25)
ARC*1 (> 30)
RADIO
EXT-IN
OK
RETURN
DIGITAL IN 1*1 (D-IN 1) (> 30)
DIGITAL IN 2*2 (D-IN 2) (> 30)
*1 “(TV)” is displayed next to items set for
TV AUDIO input.
*2 “(CABLE/SAT)” is displayed next to
DIGITAL IN when set for CABLE/SAT
AUDIO input.
Playback
Play back the contents.
Viewing Picture
Top Menu
Menu
(> 25)
(> 25)
Home Network
(DLNA)
(> 36)
To enjoy sound from the TV
Network
Displays the Home screen of
the VIERA CAST (> 34)
Select one source from either “AUX (TV)”,
“ARC (TV)” or “DIGITAL IN 1 (TV)”.
Internet Content
Switches to each source
BD/DVD/CD
SD card
iPod
≥ Items to be displayed may vary with the media.
FM Radio:
To enjoy the FM radio
(> 29)
USB device
AUX*1:
To enjoy TV broadcasts with
this unit’s speakers (> 30)
ARC*1: To enjoy TV
broadcasts with this unit’s
speakers (> 30)
Input Selection
DIGITAL IN 1*1:
To enjoy TV broadcasts with
this unit’s speakers (> 30)
*1 “(TV)” is displayed next to
items set for TV AUDIO input.
DIGITAL IN 2*2:
To enjoy audio from other
devices with this unit’s
speakers (> 30)
*2 “(CABLE/SAT)” is displayed
next to DIGITAL IN when set
for CABLE/SAT AUDIO input.
To enjoy sound from the
TV
Select one source from
either “AUX (TV)”, “ARC
(TV)” or “DIGITAL IN 1 (TV)”.
VQT2Q52
Sound(Equalizer)
(> 24)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
s6 dB to r6 dB
Enjoying sound effects
from all speakers
∫ Changing the sound modes
1
Press [SOUND] several times to select the mode.
≥ The selected mode will only be displayed on the main
unit.
Enjoying surround sound
effects
2
While the selected mode is displayed
Press [2, 1] and select the desired setting.
EQ: (Equalizer)
1 Press [SURROUND] several times to select
the effect.
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH
You can enjoy sound from the front speakers, as well as
the surround even when playing a 2-channel sound or
non-surround sound.
SUB W: (Subwoofer level)
MANUAL
You can adjust the amount of base.
1 (Weakest effect) to 4 (Strongest effect)
≥ The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
≥ The selected effect will only be displayed on the main
unit.
2 While “MANUAL” is displayed, press
[2, 1] and select the desired effect.
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics
of your room are not optimal.
DOLBY PL II MOVIE (Dolby Pro Logic II Movie)
Suitable for movie software, or the one recorded in
Dolby Surround.
≥ The setting you make is retained, and recalled every
time you play from the same type of source.
C.FOCUS: (Centre focus)
(Effective when playing audio containing centre
channel sound.)
(except DivX)
DOLBY PL II MUSIC (Dolby Pro Logic II Music)
Adds 5.1-channel effects to stereo sources.
(except DivX)
You can make the sound of the centre speaker seem
like it is coming from within the TV.
W.SRND: (Whisper-mode Surround)
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
7.1CH VS (7.1CH Virtual Surround)
You can enjoy 6.1/7.1-channel surround-like effect
using 5.1-channel speakers.
S.SURROUND (Super Surround)
You can enjoy sound from all speakers with stereo
sources.
≥ The sound effects/modes may not be available or have no effect with some
sources.
≥ You may experience a reduction in sound quality when these sound
effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
2CH STEREO
You can play any source in stereo. Sound will be
output to the front speakers and the subwoofer only.
∫ Adjusting speaker level during play
1
Press and hold [jCH SELECT] to activate the speaker
setting mode.
2
Press [jCH SELECT] several times to select the speaker.
Each time you press the button:
L R—) C_) RS_)RB*_) LB*_)LS_) SW
^"""""""""""""""""""""""""""""b
* When the optional surround back speakers are connected.
L R: Front speaker (left and right:only the balance
is adjustable.)
≥ Press [2, 1] to adjust the balance of the front
speakers.
C: Centre speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥ The channels not included in the playing audio will not be
displayed (subwoofer is displayed even if it is not
included).
VQT2Q52
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Other operations during play
Playing video contents
[BD] [DVD] [CD] [SD] [USB]
These functions may not work depending on the media and
contents.
Preparation
Stop
Turn on the television and select the appropriate video input on
the television.
Press [∫ STOP].
The stopped position is memorised.
1 Press [Í] to turn on the unit.
Resume play function
2 Insert the media.
Press [1 PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press
[∫ STOP] several times to display “STOP” on unit’s display.
≥ On BD-Video discs including BD-J (> 49), the resume
play function does not work.
Play starts.
≥ If the menu is displayed, press [3, 4, 2, 1] to select
the item and press [OK].
≥ If play does not start, press [1 PLAY].
∫ To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up
Pause
Menu.
Press [;PAUSE].
≥ Press [;PAUSE] again or [1 PLAY] to restart play.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [OPTION] and
selecting “Pop-up Menu”.
Search/Slow-motion
Search
∫ To show the status messages
While playing, press [SEARCH6] or [SEARCH5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH6] or [SEARCH5].
≥ BD-Video and AVCHD: Forward direction [SEARCH5]
only.
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
e.g. BD-Video
The speed increases up to 5 steps.
≥ Press [1 PLAY] to revert to normal playback speed.
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
Skip
BD-Video
T1 C1 0:05.14
PLAY
0:20.52
While playing or paused, press [SKIP:] or [SKIP9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
Total time
Current position
≥ DivX: Backward direction [SKIP:] only.
≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is output
as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC
Contents Output” for NTSC discs. (> 38)
Frame-by-frame
≥ Depending on media and contents, the display may change or may not
appear.
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward or
backward.
≥ DivX: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have been
dragged and dropped, copied and pasted to the media.
≥ Press [1 PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [1] (;1) only.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language (> 47), etc.
VQT2Q52
25
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn on/off secondary audio
1 Press [DISPLAY].
Useful functions
2 Press [3, 4] to select the “Disc” menu and press [1].
3 Press [3, 4] to select the “Signal Type” menu and press
[OK].
4 Press [3, 4] to select the “Soundtrack” under “Secondary
Video” menu and press [1].
1 Press [OPTION].
2 Select an item and press [OK].
While DIRECT NAVIGATOR screen is displayed
5
Press
[
3
,
4
]
to select the “On” or “Off”.
When “On” is selected, press [
1
] and then press [
3
,
4] to
select the language.
6 Press [RETURN] to exit.
To display the titles properties (recording
date, etc.)
Properties
Chapter
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,
secondary audio will not be played (> 38).
To select the chapter
View
To Picture
Folder
Playing still pictures (> 28)
To switch to another folder
Enjoying BD-Live discs with
Internet
While playing
Screen
Aspect
When black bars are shown at the top,
bottom, left, and right sides of the screen, you
can enlarge the image to fill the screen.
Some BD-Live content available on the Blu-ray discs may
require an Internet account to be created in order to access the
BD-Live content. Follow the screen display or instruction
manual of the disc for information on acquiring an account.
Top Menu
To display Top Menu.
To display Pop-up Menu.
To display Menu.
Pop-up
Menu
Menu
1 Connect to the network. (> 18)
≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” (> 39) is set to “4:3” or “4:3 Letterbox”,
the “Zoom” effect is disabled.
2 Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage (> 49).
3 Insert the disc.
≥ Depending on the media and contents, displayed items are different.
∫ Deleting data/Formatting SD cards
Enjoying BD-Live or
BONUSVIEW in BD-Video
1
2
3
4
Insert an SD card.
Press [START].
Press [3, 4] to select “To Others” and press [OK].
Press [3, 4] to select “Card Management” and press
[OK].
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
5
Press [3, 4] to select “BD-Video Data Erase” or “Format
SD Card” and press [OK].
Card Management
SD CARD
No. of Files
6
Free space 300 MB
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you to
enjoy more functions such as subtitles, exclusive images and
online games by connecting this unit to the Internet.
BD-Video Data Erase
Format SD Card
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
OK
Format this SD Card.
RETURN
6
7
Press [2, 1] to select “Yes” and press [OK].
Press [2, 1] to select “Start” and press [OK].
Playing picture-in-picture
To turn on/off secondary video
≥ To use the above functions, it is recommended that you format the card on
this unit. If the SD card you use is formatted, all data on the card will be
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs
(> 38).
Press [PIP].
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
A
B
Secondary video
Primary video
VQT2Q52
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing music
[DVD] [CD] [USB]
Regarding DivX
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an
official DivX Certified device that plays DivX video. Visit
convert your files into DivX video.
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1 Insert a disc or USB device.
If the menu is displayed, press [3, 4] to select the item
and press [OK].
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play
DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section
in the device setup menu.
2 Press [3, 4] to select the track and press
[OK].
Go to vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
≥ It is not possible to playback DivX VOD content recorded on
0.09
4.30
Music list
DIRECT NAVIGATOR
CD
Track1
5 Tracks / Total Play Time 20min54sec
No.
Track Name
Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec
01
02
03
04
05
Track1
the USB device.
Track2
Track3
Track4
Track5
Display the unit’s registration code.
(> 40, “DivX Registration” in “General”)
Play
DivX Registration
RETURN
OPTION
You must register this unit to play
protected DivX videos.
“
” indicates the track currently playing.
The registration code is necessary to
register this unit.
Registration Code: XXXXXXXXXX
∫ Playing a track in another folder
1
While the “Music list” is displayed
Press [OPTION].
A
10 alphanumeric characters
2
Press [3, 4] to select “Select Folder” and press [OK].
≥ After playing DivX VOD content for first time, the registration
code is not displayed.
≥ If you purchase DivX VOD content using a registration code
different from this unit’s code, you will not be able to play this
content. (“Authorisation Error.” is displayed.)
≥ You cannot select folders that contain no compatible tracks.
Cancel the unit’s registration.
(> 40, “DivX Registration” in “General”)
Press [2, 1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in
Regarding DivX VOD content that can only be played a set
number of times
Some DivX VOD content can only be played a set number of
times. When you play this content, the remaining number of
plays is displayed. You cannot play this content when the
number of remaining plays is zero. (“Rental Expired.” is
displayed.)
≥ The remaining number of plays decreases each time a
program is played. However, when playing from the point
where play was previously stopped, the remaining number of
plays does not decrease due to the resume play function.
∫ Displaying subtitles text
You can display subtitles text on the DivX video disc on this
unit.
This function has no relation to the subtitles specified in DivX
standard specifications and has no clear standard. The
operation might be different or it may not operate properly
depending on the way the file was made or the state of this unit
(playing, stopped, etc.).
Set “Subtitle” in “Disc” (> 34)
VQT2Q52
≥ DivX video files that do not display “Text” do not contain subtitles text.
≥ If the subtitles text are not displayed correctly, try changing the language
settings. (> 38)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing still pictures
Useful functions
[BD] [DVD] [CD] [SD] [USB]
(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card,
USB device)
1 Press [OPTION].
2 Select an item and press [OK].
While “Album View” or “Picture View” screen is displayed
1 Insert a disc, SD card or USB device.
If the menu is displayed, press [3, 4] to select the item
and press [OK].
You can display still pictures one by one at a
constant interval.
Start
Slideshow
Display Interval
Change the display interval.
Transition Effect
Set display method.
2 BD-RE, DVD-RAM
Press [3, 4, 2, 1] to select the album and
press [OK].
Repeat Play
Repeat slideshow.
Album View
DIRECT NAVIGATOR
DVD-RAM(VR)
Picture
Video
Soundtrack
106_DVD
Total 8
2006 9 12
Total 13
Music files on an iPod/iPhone or a music CD
or USB device can be played back as
background music during the slideshow.
Soundtrack Folder
A folder to playback can be selected when a
USB device with MP3 recorded is connected
to this unit.
Slideshow
Setting
Previous
Next
Slideshow Page 02/02
Video
Picture
OK
RETURN
OPTION
Press OK to go to Picture View.
3 Press [3, 4, 2, 1] to select the still
Press [3, 4, 2, 1] to select “Set” and
press [OK].
picture and press [OK].
Picture View
DIRECT NAVIGATOR
DVD-RAM(VR)
Select
Folder
To switch to another higher folder
≥ Only if there is a multiple number of higher
folders recognizable
Picture
Video
2006
0002
9
12
0003
0001
0006
0007
Folder
To select the still pictures in another folder
To Video
Playing video contents (> 25)
Page 001/001
Play
To album
view
OPTION
RETURN
To display album view.
Press [2, 1] to display the previous or next still picture.
While playing (except for slideshow)
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
Rotate
RIGHT
Rotate the still picture.
∫ To show the picture properties
While playing, press [STATUS] twice.
Rotate LEFT
Zoom out
Zoom in
Reduce the still picture
≥ This function is only available for
small-sized still pictures.
e.g. JPEG on DVD-RAM
Shooting date
Cancel “Zoom out”
Date 11.12.2009
Total
3/9
To exit the screen
Press [STATUS].
≥ Depending on the media and contents, displayed items are different.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
≥ When a music CD, a USB device with MP3 recorded and an iPod/iPhone
are inserted/connected to this unit, iPod/iPhone has a priority to be played
back as background music.
VQT2Q52
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
Listening to the Radio
Listening/confirming the preset
channels
Presetting stations
automatically
1 Press [RADIO] to select “FM”.
2 Press the numbered buttons to select the
Up to 30 stations can be set.
channel.
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2].
1 Press [RADIO] to select “FM”.
2 Press [STATUS] to select the position to
start the auto preset search.
LOWEST:
Alternatively, press [W, X] or [2, 1].
To begin auto preset with the lowest frequency (FM87.50).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Presetting stations
manually”.
RDS broadcasting
If the station you are listening to is transmitting RDS signals,
“RDS” will light up on the display.
While listening to the radio broadcast
3 Press and hold [OK].
Release the button when “AUTO” is displayed.
Press [DISPLAY] to display the text data.
The tuner starts to preset all the stations it can receive into
the channels in ascending order.
PS: Programme service
PTY: Programme type
OFF: Frequency display
≥ “SET OK” is displayed when the stations are set, and the radio tunes to the
last preset station.
PTY displays
≥ “ERROR” is displayed when automatic presetting is unsuccessful. Preset
the stations manually.
NEWS
AFFAIRS
INFO
VARIED
POP M
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
COUNTRY
NATIONAL
OLDIES
ROCK M
M.O.R. M*
LIGHT M
CLASSICS
OTHER M
WEATHER
Presetting stations manually
SPORT
FOLK M
Preparation
Select a radio broadcast.
EDUCATE
DRAMA
CULTURE
SCIENCE
DOCUMENT
TEST
1
2
Press [RADIO] to select “FM”.
Press [SEARCH6] or [SEARCH5] to select the
frequency.
LEISURE
JAZZ
ALARM
≥ To start automatic tuning, press and hold [SEARCH6], [SEARCH5]
until the frequency starts scrolling. Tuning stops when a station is found.
* M.O.R. M=Middle of the road music
1
2
While listening to the radio broadcast
Press [OK].
While “P” is flashing on the display
Press the numbered buttons to select a
channel.
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2]
≥ A station previously stored is overwritten when another station is stored in
the same channel preset.
∫ Display on the main unit
∫ If noise is excessive
Press [AUDIO] to display “MONO”.
The sound becomes monaural.
TUNED/STEREO:
Displayed when receiving stereo
broadcasting
TUNED:
Displayed when receiving monaural
broadcasting or monaural sound is
selected.
Press the button again to cancel the mode. “AUTO ST” will
be displayed on the main unit. Depending on the broadcast
system, stereo or monaural will be selected.
“MONO” is also cancelled when you change the frequency.
VQT2Q52
≥ This setting can be preset for each broadcasting station.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
Enjoying TV with unit’s
speakers
Making settings for digital
audio input
Select to suit the type of audio from the DIGITAL AUDIO IN
terminals on the main unit.
Preparation
Turn on your TV and select the appropriate audio input mode
[AUX, ARC, D-IN 1 or D-IN 2] to suit the connections to this
unit. (> 23)
Press [EXT-IN] several times to select “D-IN 1”
(DIGITAL IN 1) or “D-IN 2” (DIGITAL IN 2).
∫ DIGITAL IN 1/DIGITAL IN 2
Press [AUDIO].
Surround sound effects
M1
M2
You can enhance stereo sources with surround sound effect.
M1rM2 (stereo audio)
(Only works with Dolby Dual Mono)
≥ “M1” or “M2” is not available if “On” is selected in “Digital
Audio Input”. (> 38)
1 Press [SURROUND] several times to select
the effect.
2
While “MANUAL” is displayed on the unit’s display
Press [2, 1] and select the desired effect.
∫ DIGITAL IN 2
Press [STATUS].
CABLE/SAT AUDIO
Surround modes to enjoy TV audio or stereo
sources from all speakers:
≥ DOLBY PL II MOVIE
≥ DOLBY PL II MUSIC
≥ S.SURROUND
Select when an HDMI connected STB is selected on the
TV, “D-IN 2” input is automatically selected. (> 31, “Setting
the audio link with the STB”).
≥ Cinema Surround (> 19)
≥ Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not
output from the HDMI AV OUT terminal.
For more detailed information on this operation, please refer to
the “Enjoying surround sound effects” section on page 24.
Sound modes
You can adjust the mode depending on the source or situation.
1 Press [SOUND] several times to select the
mode.
2
While the selected mode is displayed on the unit’s
display
Press [2, 1] and select the desired setting.
For more detailed information on this operation, please refer to
the “Changing the sound modes” section on page 24.
VQT2Q52
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Linked operations with
the TV
One touch play
You can turn on this unit and the TV, and start play with a
single press of a button.
While the unit and the TV are in standby mode;
Press [1 PLAY].
(VIERA Link “HDAVI ControlTM”)
Speaker Selection
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) under “HDAVI Control”.
You can use this function by connecting the equipment
with an HDMI cable. See the operating instructions for
connected equipment for operational details.
You can select whether audio is output from the unit’s
speakers or the TV speakers by using the TV menu settings.
Home Cinema
This unit’s speakers are active.
≥ When this unit is in standby mode, changing the TV
speakers to this unit’s speakers in the TV menu will
automatically turn the unit on and select, “AUX”*1, “ARC”*1 or
“D-IN 1” (DIGITAL IN 1)*1 as the source.
≥ You can control the volume setting using the volume or mute
button on the TV’s remote control.
Preparation
1
2
3
Set “VIERA Link” to “On” (> 39).
(The default setting is “On”.)
Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so that
the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
≥ If you turn off this unit, TV speakers will be automatically
activated.
TV
TV speakers are active.
≥ The volume of this unit is set to “0”.
≥ Audio output is 2-channel audio.
Setting the audio link
≥ When switching between this unit’s speakers and TV speakers, the TV
screen may be blank for several seconds.
∫ Setting the audio link with the TV
With the remote control;
≥ Select the actual TV audio connection on the main unit.
Automatic input switching
(Power on link)
1
Press [START] and press [3, 4] to select “To Others” and
press [OK].
When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the television is off, the television
will automatically turn on.
2
3
Press [3, 4] to select “Setup” and press [OK].
Press [3, 4] to select “TV / Device Connection” and press
[OK].
4
5
Press [3, 4] to select “TV Audio Input”.
Press [2, 1] to switch “AUX”, “ARC” or “DIGITAL IN 1”.
jWhen play starts on the unit
jWhen an action that uses the display screen is performed
(e.g., DIRECT NAVIGATOR screen)
Whenever the connection or settings are changed, reconfirm
the points above.
jBD-Video, DVD-Video:
When playback stops, the TV will automatically return to TV
tuner mode.
∫ Setting the audio link with the STB
≥ When you switch the TV input to TV tuner mode, this unit will
automatically switch to “AUX”*1, “ARC”*1 or “D-IN 1” (DIGITAL
IN 1)*1 or “D-IN 2” (DIGITAL IN 2)*2.
≥ This function does not work when the iPod/iPhone selector is
chosen. (> 33)
With the remote control;
≥ Select the STB input channel on the TV.
1
2
Press [EXT-IN] to select “D-IN 2”.
Press [STATUS] to select “CABLE/SAT AUDIO ON”.
≥ If the input channel of the STB on the TV is changed or if you
want to change the device allocated for the linked
operations, select “CABLE/SAT AUDIO OFF” in step 2
above and then repeat steps 1 to 2.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009)
for Panasonic’s HDAVI Control compatible equipment. This standard is
compatible with Panasonic’s conventional HDAVI equipment.
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
VQT2Q52
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Other devices
Using the iPod/iPhone
Automatic lip-sync function
(for HDAVI Control 3 or later)
iPod/iPhone Connection
Delay between audio and video is automatically adjusted,
enabling you to enjoy smooth audio for the picture.(> 38,
“Audio Delay”)
Preparation
≥ Before connecting/disconnecting the iPod/iPhone, turn the
main unit off or reduce the volume of the main unit to its
minimum.
≥ Make sure that the video cable connection is made to view
photos/videos from the iPod/iPhone.
≥ This function works only when “BD/DVD”, “SD”, “USB”,
“AUX”*1, “ARC”*1, “D-IN 1” (DIGITAL IN 1)*1 or “D-IN 2”
(DIGITAL IN 2)*2 is selected as the source on this unit.
*1 “AUX”, “ARC” or “D-IN 1” works depending on the setting in “Setting the
audio link with the TV”. (> 31)
*2 “D-IN 2” works depending on the setting in “Setting the audio link with
the STB”. (> 31)
1 Push # to open the iPod/iPhone lid.
2 Connect the iPod/iPhone (not included)
firmly.
Power Off Link
iPod/iPhone
2
1
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
Playing music continuously even after turning off the TV
(When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later.)
Main unit
Select “Video” in “Power Off Link” (> 39)
A
B
Dock adapter (not included)
≥ Attach the dock adapter until firmly fitting into the
dock. The adapter should be supplied with your
iPod/iPhone for the stable use.
If you need an adapter, consult your iPod/iPhone
dealer.
Easy control only with VIERA
remote control
Dock for iPod/iPhone
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu,
etc.
≥ This works only during “BD/DVD”, “SD” or “USB” playback
and resume modes.
About recharging the battery
≥ iPod/iPhone will start recharging regardless of whether this unit is on or off.
≥ “IPOD ¢” will be shown on the main unit’s display during iPod/iPhone
charging in main unit standby mode.
≥ Once fully recharged, additional recharging will not occur.
1 Press [OPTION].
Compatible iPod/iPhone (as of December 2009)
≥ Compatibility depends on the software version of your iPod/iPhone.
e.g. BD-Video
Control Panel
Name
Memory size
16 GB, 32 GB
8 GB, 16 GB
8 GB, 16 GB
iPhone 3GS
Screen Aspect
Top Menu
iPhone 3G
iPod nano 5th generation (video camera)
8 GB, 16 GB, 32 GB,
64 GB
Pop-up Menu
iPod touch 2nd generation
OK
iPod classic
120 GB, 160 GB (2009)
8 GB, 16 GB
160 GB (2007)
8 GB, 16 GB, 32 GB
4 GB, 8 GB
RETURN
OPTION
iPod nano 4th generation (video)
iPod classic
2 Select an item and press [OK].
iPod touch 1st generation
iPod nano 3rd generation (video)
iPod classic
≥ The OPTION menu may not appear while the Top Menu for
80 GB
BD-Video or DVD-Video is displayed.
iPod nano 2nd generation (aluminum)
iPod 5th generation (video)
iPod 5th generation (video)
iPod nano 1st generation
iPod 4th generation (colour display)
iPod 4th generation (colour display)
iPod 4th generation
2 GB, 4 GB, 8 GB
60 GB, 80 GB
30 GB
1 GB, 2 GB, 4 GB
40 GB, 60 GB
20 GB, 30 GB
40 GB
≥ The buttons that you can use for this unit vary depending on the TV. For
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible
buttons on the TV remote control.
≥ Depending on the menu, some button operations cannot be performed
from the TV’s remote control.
iPod 4th generation
20 GB
iPod mini
4 GB, 6 GB
VQT2Q52
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Other methods of playback
iPod/iPhone Playback
Preparation
1 Press [START].
≥ Make sure that the “IPOD” source is selected. Press [iPod] to
select the source.
2 Press [3, 4] to select “Menu” and then
≥ To view photos/videos from the iPod/iPhone
Operate the iPod/iPhone menu to make the appropriate
photo/video output settings for your TV.
≥ To display the picture, turn on the TV and select the
appropriate video input mode.
press [OK].
3 Press [3, 4] to select “Play Mode” and
then press [OK].
4 Press [3, 4] to select an item and press
[OK].
Enjoy music/video
Shuffle (For music playback only.)
Songs:
Play all songs on iPod/iPhone in random order.
Albums:
To use the iPod touch/iPhone features
1
2
Press the Home button on the iPod touch/iPhone.
Select the iPod touch/iPhone features on the touch screen
to operate.
Play all songs on an album in random order.
Repeat
One:
Play a single song/video repeatedly.
All:
Play all songs/videos from selected items (e.g., Playlists,
Albums, etc.) repeatedly.
1 Press [iPod] to select “IPOD”.
2 Press [STATUS] several times to select the
music menu or videos menu.
3 Press [3, 4] to select an item and press
5 Press [3, 4] to select the setting and press
[OK].
[OK].
≥ Repeat this step until the selected title starts playback.
≥ Press [2, 1] to display the previous or next page.
≥ The setting of the playback mode will be kept until changes are made on
the same iPod/iPhone.
≥ This function does not work when “Use iPod display (All)” is selected.
e.g., music playback screen
iPod
Good morning
Ronaldo
Happy days
Basic controls
1:00
-2:30
45 of 1230
Shuffle (Albums)
Repeat (All)
(For music and video playback only)
Buttons
[1 PLAY]
[∫ STOP]
[;PAUSE]
Functions
To exit, press [TOP MENU/DIRECT NAVIGATOR].
Enjoy photos
Play
Pause
[SKIP:,
Skip
SKIP9]
1 Press [iPod] to select “IPOD”.
2 Press [STATUS] several times to select
(Press and hold)
[SEARCH6,
SEARCH5]
Search
“ALL” on the unit’s display.
3 Switch the TV input to video in.
4 Play a slideshow on your iPod/iPhone.
≥ Surround sound effect and sound mode are available (> 24).
The picture will be displayed on your TV.
You can use the remote control to operate the iPod/iPhone
menu.
The operation may vary among iPod/iPhone models.
≥ [3, 4]: To navigate menu items
≥ [OK]: To go to the next menu.
≥ [RETURN]: To return to the previous menu.
VQT2Q52
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Playback menu
Enjoying VIERA CAST
You can access a selection of Internet services from the Home
screen with VIERA CAST, for example YouTube, Picasa Web
Albums. (Current as of December 2009)
1 Press [BD/SD] to select “BD/DVD”.
2 Press [DISPLAY].
e.g., BD-Video
Preparation
≥ Network connection (> 18)
≥ Network setting (> 20)
Disc
Play
Picture
Sound
Signal Type
Off
Main
Angle
1ENG
Subtitle
-
-
Subtitle Style
1 Press [VIERA CAST].
Menus
Items
Settings
Message is displayed. Please read these instructions
carefully and then press [OK].
3 Press [3, 4] to select the menu and press
[1].
2 Press [3, 4, 2, 1] to select the item and
4 Press [3, 4, 2, 1] to select the item and
press [OK].
press [1].
Operable buttons:
[3, 4, 2, 1], [OK], [RETURN], coloured buttons,
numbered buttons
5 Press [3, 4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
VIERA CAST Home screen;
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped,
etc.) and media contents, there may be some items that
you cannot select or change.
London, United Kingdom
Weather
COMING SOON
Setup
WSW 21
km/h
3°
Regarding Language, Audio attribute and Video attribute:
(> 47)
Featured Photos
Featured Videos
COMING
SOON
COMING
SOON
Bloomberg
15min. delay
TELEVISION
XXX
XXX
XXX
7465.95
-89.68
778.94 -9.47998
Disc
1442.82
-25.15
Images are for illustration purposes,
contents may change without notice.
Signal Type
Primary Video
To return to VIERA CAST Home screen
Press [VIERA CAST].
Video
The recording method of original video
appears.
To exit from VIERA CAST
Soundtrack Select the type of audio or language.
Press [EXIT], [START] or [TOP MENU/DIRECT NAVIGATOR].
≥ When the Blu-ray disc logo is selected on the Home screen,
the playback source will be changed and go back to the
source previously selected.
Secondary Video
Video
Select on/off of images. The recording
method of original video appears.
Soundtrack Select on/off of audio and the language.
≥ In the following cases, settings are possible using “Internet Content
Settings” (> 40)
– When restricting the use of VIERA CAST.
Video
The recording method of original video appears.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed correctly.
A high-speed Internet service with a speed of at least 6 Mbps is
recommended.
Soundtrack
Show or change the soundtrack.
Subtitle
≥ Be sure to update the firmware when a firmware update notice is displayed
on the screen. If the firmware is not updated, you will not be able to use the
VIERA CAST function. (> 21)
≥ VIERA CAST home screen is subject to change without notice.
≥ The services through VIERA CAST are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
Turn the subtitle on/off, and change the language depending
on the media.
Subtitle Style
Select the subtitle style.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be
presented in specific languages.
Audio channel
Select the audio channel number.
(> 25, “Changing audio”)
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu.
(> 25)
VQT2Q52
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Play
Sound
Sound Effects*1, *2
Repeat Play
(Only when the elapsed time is being displayed on the unit’s
(Discs recorded at 48 kHz or less)
display.)
This feature gives you brighter sound by increasing the high
frequency portion of the audio.
Select the item which you want to repeat. The items displayed
differ depending on the type of media.
Re-master 1
Re-master 2
Re-master 3
Pop and rock
Jazz
Select “Off” to cancel.
Classical
Random
Select whether or not to play random.
Dialog Enhancer*1
The volume of the centre channel is raised to make dialog
easier to hear.
Playback Information Window
Displays the following.
Audio/video attribute information of disc.
High Clarity Sound
When connected to TV via HDMI AV OUT terminal for
outputting image, it produces clearer sound.
Only when you have selected “Enable” in “High Clarity Sound”
(> 38)
Settings status of “Digital Audio Output” (> 38).
HDMI output information.
*&/+
Press [RETURN] to exit.
*1 When audio is output from the HDMI AV OUT terminal this function is
effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/
DTS-HD” is set to “PCM”. (> 38)
*2 This function has no effect when the type of audio is Dolby Pro Logic II.
Picture
Mode
Select the picture quality mode during play.
Detail Clarity
The picture is sharp and detailed.
Progressive
Select the method of conversion for progressive output to suit
the type of material being played.
≥ If the video is disrupted when “Auto” is selected, select either
“Video” or “Film” depending on the material to be played
back.
24p
Movies and other material recorded on DVD-Video at 24p are
output at 24p.
≥ Only when you have selected “On” in “24p Output” (> 39)
and play discs recorded at a rate of 60 fields per second.
VQT2Q52
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DLNA feature
You can enjoy music, video and picture contents saved on a
DLNA Certified media server (such as a PC with Windows 7
installed etc.) connected to the home network with this unit.
You also can enjoy viewing them with Panasonic DLNA
compatible recorders (DIGA).
Enjoy contents on the
equipment connected to this
unit via the network
1 Press [START].
2 Press [3, 4] to select “Network” and press
≥ The countries where DIGA is available are limited. Refer to
following site for availability.
[OK].
3 Press [3, 4] to select “Home Network
(DLNA)” and press [OK].
≥ A list of equipment connected via the network is
displayed.
≥ For the operation of equipment connected to the network,
refer their respective operating instructions.
≥ This list can be updated by pressing the red button on
the remote control.
Preparation
1
Perform network connection (> 18) and network setting
(> 20).
e.g.
2
Connect a DLNA Certified media server to the network.
Media Server
DIGA
DIGA
PC name
OK
RETURN
Servers found on the network are displayed.
Please select one.
Update
4 Press [3, 4] to select the equipment to
playback the contents, and press [OK].
5 Press [3, 4, 2, 1] to select the item to
playback (folder), and press [OK].
≥ Menu structure will be different depending on the
equipment connected to this unit. Select the contents by
repeating the operation.
≥ Control Panel is displayed once the playback starts.
Operation can be performed with [3, 4, 2, 1], [OK],
[RETURN] and [EXIT].
Control Panel
e.g.
Exit
A
B
C
D
Broadband router, Wireless router (Access point), etc.
LAN Cable (Straight)
Internet
DLNA Certified media server
≥ Press [OK] if the Control Panel is not displayed.
When connected to a Panasonic DLNA compatible
recorder (DIGA)
≥ Discs cannot be played back. Also, depending on the equipment, playback
of pictures may not be possible.
≥ Items displayed in grey on the display cannot be played back by this unit.
≥ This unit cannot be played back via connected equipment.
≥ Depending on the performance of the connected PC, video frames may be
dropped during playback, or it may not playback at all.
Perform the Home Network (DLNA) setup.
When a message requesting operation of the equipment to
be registered is displayed, perform the operations in steps
1-4 of “Enjoy contents on the equipment connected to this
unit via the network” (> right).
VQT2Q52
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
Useful functions for when
playing back pictures
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.
The following operations are possible when playing back
pictures from connected equipment.
1 Press [START] and press [3, 4] to select
While picture list screen or folder with picture list screen
is displayed
“To Others” and press [OK].
2 Press [3, 4] to select “Setup” and press
1
2
Press [OPTION].
Select an item, then press [OK].
[OK].
Setup
Start
Slideshow
You can display still pictures one by one at a
constant interval.
Disc
Picture
Sound
Slideshow
Settings
Display Interval
Change the display interval.
Repeat Play
Display
TV / Device Connection
Network
General
Repeat slideshow.
OK
RETURN
Press [3, 4, 2, 1] to select “Set” and
press [OK].
3 Press [3, 4] to select the menu and press
[OK].
While playing
4 Press [3, 4] to select the item and press
[OK].
1
2
Press [OPTION].
Select an item, then press [OK].
If there are any other items, repeat these steps.
Status
Show the picture properties (> 28).
5 Press [3, 4, 2, 1] to select the option and
Rotate
RIGHT
Rotate the still picture.
press [OK].
(except for
slideshow)
≥ There may be differences in operation methods. If this
happens, follow the on-screen instructions for the operation.
Rotate LEFT
(except for
slideshow)
About the password
The password of the following items are common.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” (> 40)
Disc
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit password
with the numbered buttons when the password screen is
shown.
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit password
with the numbered buttons when the password screen is
shown.
Soundtrack Preference
Choose the language for audio.
≥ If “Original” is selected, the original language of each disc
will be selected.
≥ Enter a code (> 47) with the numbered buttons when you
select “Other ¢¢¢¢”.
VQT2Q52
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitle Preference
Choose the language for subtitle.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 26)
≥ If “Off” is selected, the unit outputs the primary audio only.
≥ If “Automatic” is selected and the language selected for
“Soundtrack Preference” is not available, subtitles of that
language will automatically appear if available on that disc.
≥ Enter a code (> 47) with the numbered buttons when you
select “Other ¢¢¢¢”.
Digital Audio Input
Select whether to receive the digital sound as PCM or the
original sound format.
Menu Preference
Select “On” if the sound is cut off intermittently.
Choose the language for disc menus.
≥ Enter a code (> 47) with the numbered buttons when you
select “Other ¢¢¢¢”.
Downmix
Select the downmix system to enjoy multi-channel or
2-channel sound.
BD-Live Internet Access (> 26)
≥ Select “Surround encoded” to enjoy the surround sound.
≥ There is no downmix effect on the bitstream audio signal.
≥ The audio will be output in “Stereo” in the following cases.
– AVCHD playback
jPlayback of secondary audio (including the button click
sound).
You can restrict Internet access when BD-Live functions are
used.
≥ If “Limit” is selected, Internet access is permitted only for
BD-Live contents which have content owner certificates.
DivX Subtitle Text
Select a suitable item according to the language used for DivX
subtitles text (> 27).
7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically expanded
≥ This item is displayed only after playing back a file.
and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the original number
of channels.
(Note that in the case of 6.1ch audio, playback will be at
5.1ch.)
Picture
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or LPCM.
Still Mode
Select the type of picture shown when you pause playback.
Automatic Automatically selects the type of picture shown.
Select if jittering occurs when “Automatic” is
selected.
Field
High Clarity Sound
When connected to TV via HDMI AV OUT terminal for
outputting image, it produces clearer sound.
≥ Set to “Enable” and then set “High Clarity Sound” on the
playback menu to “On”. (> 35)
Select if small text or fine patterns cannot be
Frame
seen clearly when “Automatic” is selected.
Seamless Play
Audio Delay
The chapters segment in playlists are played seamlessly.
≥ Select “On” when the picture freezes for a moment at the
chapters segment in playlists.
Mis-sync between the video and audio is corrected by delaying
the audio output.
Speaker
NTSC Contents Output
Select PAL60 or NTSC output when playing NTSC discs.
Refer to page 41
Display
Sound
On-Screen Messages
Choose whether to show status messages automatically.
Dynamic Range Compression
You can listen at low volumes but still hear dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
On-Screen Language
Choose the language for these menus and on-screen
messages.
Digital Audio Output
Press [OK] to show the following settings.
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If there is no operation for 5 minutes or more, DIRECT
NAVIGATOR screen switches to START menu automatically.
≥ While playing and pausing, etc., this function is not available.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, DIRECT NAVIGATOR
screen switches to the other states automatically.
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
MPEG Audio
Select the audio signal to output
.
≥ Select “PCM” when the connected equipment cannot
decode the respective audio format.
VQT2Q52
≥ Not making the proper settings may result in noise.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥ Audio will be output through the system's speakers when
“Off” is selected.
FL Display
Changes the brightness of the unit’s display.
≥ If “Automatic” is selected, the display is dimmed but
brightens when you perform some operations.
Software Licence
Information about the software used by this unit is displayed.
VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI Control”.
TV / Device Connection
Deep Colour Output
TV Aspect
This setting is for selecting whether to use Deep Colour
Output when a television that supports Deep Colour is
connected.
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
4:3
The sides are cut off so
the picture fills the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
Contents Type Flag is connected.
4:3 Letterbox
Power Off Link
Black bands appear at the
top and bottom of the
picture.
Select the desired power off link setting of this unit for
VIERA Link operation (> 32). (This works depending on the
settings of the connected VIERA Link “HDAVI Control”
compatible equipment.)
When connected to a 16:9 widescreen television and playing
4:3 ratio image:
Video/Audio:
When the TV is turned off, this unit will turn off automatically.
Video:
When the TV is turned off, this unit will turn off except during
the following conditions:
16:9
Video is displayed as a 4:3 ratio image in the
centre of the screen.
jCD or MP3 audio playback
HDMI Connection
jiPod/iPhone mode
Press [OK] to show the following settings.
jRadio mode
j“AUX”, “ARC” or “D-IN 1” (DIGITAL IN 1) mode
(non-selected TV AUDIO setting for VIERA Link)
j“D-IN 2” (DIGITAL IN 2) mode (non-selected CABLE/SAT
AUDIO setting for VIERA Link)
HDMI Video Format
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
≥ If “Automatic” is selected, automatically selects the output
resolution best suited to the connected television.
≥ To enjoy high definition video up-converted to 1080p, you
need to connect the unit directly to 1080p compatible
HDTV (High Definition Television). If this unit is connected
to an HDTV through other equipment, it must also be
1080p compatible.
TV Audio Input
Select the TV audio input to work with the VIERA Link
operations
TV System
Change the setting to match the equipment you are connecting
with.
≥ When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then set “24p”
in “Picture” (> 35) to “On”
≥ When BD-Video images other than 24p are played,
images are output at 60p.
HDMI Colour Mode
This setting is for selecting colour-space conversion of the
image signal when the unit is connected using an HDMI
cable.
VQT2Q52
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Network
General
Network Easy Setting (> 20)
Remote Control
Change the remote control code if other Panasonic products
react to this remote control.
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings.
Quick Start*
Speed of startup from standby mode is increased.
≥ Internal control unit will be powered when it is set to “On” so
compared to when the setting is “Off” the following will occur.
jIdle power consumption will increase. (about the power
consumption > 50)
LAN Connection Mode
Select connection method.
Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
*The cooling fan may turn slowly to prevent overheating of
internal parts.
* Depending on the power conserving setting activated on
the TV, this function may have less effect when the unit is
started by the power on link function. (> 31)
Connection Setting
The Wireless router (Access point) connection wizard will
be displayed.
[BT735] [BT330] Smart setup / [BT230] Easy setup (> 19)
You can execute basic settings to optimize your home theatre
system.
IP Address / DNS Settings
This is for checking the state of the network connection and
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
Default Settings
This returns all values in the Setup menu and the playback
menu, except for “Remote Control”, “On-Screen Language”,
“IP Address / DNS Settings”, “Proxy Server Settings”, “Lock”,
“DVD-Video Ratings” and “BD-Video Ratings” to the default
settings.
≥ “Connection Speed Setting” is enabled only when
“Connection Speed Auto-Config” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
DivX Registration (> 27)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Internet Content Settings (> 34) (VIERA CAST)
Press [OK] to show the following settings.
Display firmware version of this unit and wireless LAN module
of optional Wireless LAN Adaptor.
Lock
You can restrict using VIERA CAST.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the numbered buttons when the
password screen is shown.
Firmware Update (> 21)
Press [OK] to show the following settings.
Audio Auto Gain Control
Automatic Update Check
Volume that is different depending on the contents is
adjusted automatically to the standard volume while using
the VIERA CAST.
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned on
and you can update it if necessary.
≥ Depending on contents, this function effect will not
work.
≥ Select “Off” when the audio is warped.
Time Zone
Update Now
You can update the firmware manually.
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥ Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
Summer Time
≥ Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
VQT2Q52
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker settings
B
Surround / Surround back speakers
Difference
Setting
5.0 ms
ms
0.0
Delay time (
)
Approx. 170 cm
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
If either distance A or B is less than C (> below), find the
difference in the relevant table and adjust the delay time to
make up for the difference.
Approx. 340 cm
10.0 ms
15.0 ms
Approx. 510 cm
∫ When using the 7.1ch speaker system
1
A
Check the distance difference of both the front speakers
and the surround back speakers from the seating position.
Set the delay time of the surround back speakers.
:
:
B
C
C
L
R
2
A
C
C
SW
B
Adjusting speaker level
D
LS
RS
RS
LS
dB
0
Volume (Channel balance) (
)
A B C: Primary listening distance
(Effective when playing multi-channel audio)
A
B
C
D
Approximate room dimensions
Actual speaker position
Ideal speaker position
1 Select “Test” and press [OK].
A test signal is output.
Circle of constant primary listening distance
2
While listening to the test signal
1 Press [3, 4, 2, 1] to select the distance
Press [3, 4] to adjust the volume of each
speaker.
box ( ms ) and press [OK].
0.0
e.g., 5.1ch setting
The volume can be adjusted between r6 dB to s6 dB.
≥ Set each speaker level according to the volume of the
Front (L) and Front (R) speaker volume respectively.
≥ No signal is output for the subwoofer. To adjust its
volume, see page 24, “Adjusting speaker level during
play”.
ms
d0B
C
L
0.0
R
Complete
Test
d0B
d0B
SW
d0B
ms
0.0
3 Press [OK].
LS
RS
The test signal stops.
e.g., 5.1ch setting
ms
d0B
A
B
Centre (C)
Left Surround (LS), Right Surround (RS)
C
L
0.0
R
Complete
Test
d0B
d0B
e.g., 7.1ch setting
SW
d0B
ms
0.0
ms
d0B
d0B
d0B
C
L
0.0
R
LS
RS
Complete
Test
SW
d0B
ms
0.0
A
Centre (C)
Test
Left Surround (LS), Right Surround (RS)
LS
RS
B
C
ms
0.0
d0B
LB
d0B
RB
C
Left Surround back (LB), Right Surround back (RB)
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
2 Press [3, 4] to select the setting and press
[OK].
A
Centre speaker
Difference
Setting
1.0 ms
2.0 ms
3.0 ms
4.0 ms
5.0 ms
Approx. 34 cm
Approx. 68 cm
Approx. 102 cm
Approx. 136 cm
Approx. 170 cm
VQT2Q52
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional speaker settings
[BT735]: Centre speaker
Speaker installation
option
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg per screw. Consult a
qualified building contractor when attaching the speakers to
a wall. Improper attachment may result in damage to the wall
and speakers.
[BT330] [BT230]: Centre speaker
K
L
M
N
O
P
117 mm
209 mm to 211 mm
97 mm
18.8 mm
17 mm
≥ Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
1 Drive a screw (not included) into the wall.
99 mm to 101 mm
A
B
C
D
E
At least 30 mm
‰ 4.0 mm
‰
7.0 mm to 9.4 mm
Wall or pillar
5.5 mm to 7.5 mm
∫ To avoid speaker dropping
[BT735]: Front speaker, Centre speaker, Surround speaker
[BT330]: Front speaker
e.g., [BT735]: Front speaker
2 Fit the speaker securely onto the screw(s)
with the hole(s).
e.g., [BT735] Front speaker
DO NOT
DO
A
B
C
D
String (not included)
Screw eye (not included)
Less than 10 cm
≥ In this position, the speaker
will likely fall if moved to the
left or right.
≥ Move the speaker so
that the screw is in this
position.
Rear of the speaker
≥ Consult a qualified building contractor to avoid damage to
the wall or speakers.
[BT735]: Front speaker, Surround speaker
[BT330]: Front speaker
≥ Use a string of less than ‰ 2.0 mm, which is capable of
supporting over 10 kg.
Attach to a wall without the base and the stand.
[BT735]
[BT330]
Reattaching the speaker cable
[BT330]
Leave about
120 mm
Pull out the cable
through the hole.
Insert the cable
from the bottom.
[BT330]:
Surround speaker
[BT230]:
Front speaker, Surround speaker
F
G
H
I
J
97 mm
210 mm to 212 mm
72 mm
349 mm to 351 mm
26 mm
VQT2Q52
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
You have forgotten your ratings password.
You want to cancel the ratings level.
While the disc tray is empty and “BD/DVD” is selected as a source, press
Troubleshooting guide
Before requesting service, please perform the
following steps.
and hold [SKIP:] on the remote control and [1] (Play) on the unit at
the same time for more than 5 seconds. The ratings level returns to the
factory preset.
Do you have the latest firmware installed?
Firmware updates may be released to correct operating irregularities that
are discovered with certain movies. (
>
21)
Power
4
Make the following checks.
If the problem remains unresolved, consult your
dealer for instructions.
No power.
≥
Insert the AC mains lead securely into a household mains socket. (
>
18)
The following do not indicate a problem with this unit:
The unit switches to standby mode.
≥
≥
Regular disc rotating sounds.
Image disturbance during search.
≥
≥
When the time set for the sleep timer has passed, the power will be
turned off. ( 8)
>
One of the unit’s safety devices is activated. Press [Í/I] on the main unit
to turn the unit on.
∫ Unit doesn’t respond to remote control or
front panel buttons.
The main unit is turned off when the input for the TV is
changed.
Press and hold [Í/I] on the main unit for 5 seconds.
j
If still unable to turn the unit off, disconnect the AC mains lead, wait 1
≥
This is a normal phenomenon when using VIERA Link (HDAVI Control 4
or later). For details please read the operating instructions for the TV.
minute, then reconnect the AC mains lead.
∫ Cannot eject disc.
The unit may have a problem.
While the unit is off, press and hold [SKIP
Displays
9] on the remote control and
[<
OPEN/CLOSE] on the unit at the same time for more than 5 seconds.
The display is dim.
Change “FL Display” in the Setup menu. (
≥
>
39)
General operation
TV screen and video
To return to the factory preset.
Select “Yes” in “Default Settings” in the Setup menu. (
≥
>
40)
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
An incorrect resolution is selected in “HDMI Video Format”. Reset the
setting as follows:
While the disc tray is empty and “BD/DVD” is selected as a source, press
To return all settings to the factory preset.
≥
Reset the unit as follows:
≥
While the unit is off, press and hold [+ VOLUME], [
<
OPEN/CLOSE]
and [Í/I] on the main unit at the same time for more than 5 seconds.
and hold [
1] (Play) and [∫] (Stop) on the main unit at the same time for
The remote control doesn’t work properly.
more than 5 seconds to cancel the setting.
When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not
output in bitstream, select “Yes” in “Default Settings” and make proper
≥
≥
The remote control and main unit are using different codes. Change the
code on the remote control. ( 22)
It may be necessary to set the code of the remote control again after
changing the batteries for remote control. ( 22)
≥
≥
≥
>
settings. (
The unit and television are using different video systems. While stopped,
keep pressing [ ] (Stop) and [ OPEN/CLOSE] on the main unit for 5
>
40)
>
∫
<
Disc cannot be played.
or more seconds. The system switches from PAL to NTSC or vice versa.
The system used on the disc doesn’t match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL60 for viewing on a PAL
television (“NTSC Contents Output” in the “Picture”).
≥
≥
The disc is dirty. (
Check the region code.
>
7)
Still pictures (JPEG) do not playback normally.
≥
The images that were edited on the PC, such as Progressive JPEG, etc.,
may not playback.
Video is not output.
Set the “High Clarity Sound” in the playback menu to “Off” to use the
VIDEO OUT terminal. ( 35)
≥
The TV tuner mode is not displayed when the TV is switched
on.
>
≥
This phenomenon may occur, depending on the TV setting, when “Quick
Start” is set to “On”.
Depending on the TV, this phenomenon may be prevented by
reconnecting the HDMI cable to a different HDMI input terminal or by
changing the HDMI auto connection setting.
Video is not output in high definition.
Confirm that “HDMI Video Format” in the Setup menu is set properly.
39)
≥
≥
(>
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
The contents of the USB device cannot be read.
≥ If inserted during playback, the USB device may not be
recognised by this unit.
≥
≥
Confirm the “TV Aspect” is set properly. (
Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” ( 26) on the unit is also possible.)
>
39)
>
After choosing “Home Cinema” in “Speaker Selection” with the
TV’s remote control, the TV’s input selection also changes.
≥
Disconnect the HDMI cable from the TV and reconnect it to a different
HDMI IN terminal.
VQT2Q52
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Radio
No sound.
Low volume.
Distorted sound.
Distorted sound or noise is heard.
≥ Adjust the position of the antenna.
≥ Use an outdoor antenna. (> 15)
Cannot hear the desired audio type.
≥ Check connections to speakers and other equipment. (> 12,
13,15s18)
A beat sound is heard.
≥ Try to keep a certain amount of distance between the
antenna and the TV.
≥
≥
Ensure the speaker settings for your speakers are correct. (
To output audio from a device connected with an HDMI cable,
set “HDMI Audio Output” to “On” in the Setup menu. ( 39)
>
41)
>
Network
≥ When “BD-Video Secondary Audio” is set to “On”, Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
≥ Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. (> 35)
I can’t connect to the network.
≥ Confirm the network connection and settings. (> 18, 40)
≥ Check the operating instructions for each device and
connect accordingly.
≥ Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
≥ The multi-channel audio from a device connected to the TV
is not output in it’s original multi-channel form.
jIf the device has an optical audio output terminal, connect
the device to this unit’s “OPTICAL 2” terminal. (> 17, 30)
When using Wireless LAN connection, video or audio from the
DLNA Certified media server is played back intermittently, not
played back or video frames are dropped during playback.
≥
Higher transfer rate router such as 802.11n (2.4 GHz or 5
GHz) Wireless router (Access Point) may solve the problem. If
you use 802.11n (2.4 GHz or 5 GHz) Wireless router (Access
Point), it is necessary to set the encryption type to “AES”.
Simultaneous use with a microwave, cordless telephone etc.
at 2.4 GHz may result in connection interruptions or other
problems.
No surround sound.
≥ Press [SURROUND] to select a surround effect. (> 24)
≥ (When using the 7.1ch speaker system)
Audio is not available from the surround back speakers even
though Dolby Pro Logic II turns on.
≥
On the “Access Point Connection Setting” screen (
>
40), the
continuous lighting of at least 4 “Reception” indicators is the
target for a stable connection. If 3 or fewer indicators are lit or
the connection is being interrupted, change the position or angle
of your Wireless router (Access point) and see if the connection
state improves. If there is no improvement, connect to a wired
Cannot switch audio.
≥ When audio is output from the HDMI AV OUT terminal, set
“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or
“MPEG Audio” to “PCM”. (> 38)
network and perform the “Network Easy Setting” (
>
20) again.
No sound from the TV.
≥ Press [EXT-IN] to select the corresponding source. (> 23)
≥ The ARC (Audio Return Channel) function is not available.
Instead, use an optical digital audio cable or an audio cable
to have the TV sound. (> 16, 17)
The contents of the USB device cannot be read.
≥ USB devices connected using USB extension cable other
than the included with the Wireless LAN Adaptor DY-WL10
(optional) or a USB hub may not be recognised by this unit.
≥
If the TV is not ARC compatible and only the HDMI connection
is used, an extra audio connection is necessary (
>
16, 17).
Other difficulties with playback
iPod/iPhone operation
BD-Video or DVD-Video is not played.
≥ Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (> 11)
≥ You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (> 37)
Cannot charge or operate.
≥ Check that the iPod/iPhone is connected firmly. (> 32)
≥ The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
≥ Some BD-Video can only be output with HDMI.
Cannot display iPod/iPhone videos/photos on the TV.
≥ Make sure that TV is connected to the VIDEO OUT terminal
on this unit. (> 16)
≥ Operate the iPod/iPhone menu to make the appropriate
video/photo output settings for your TV. (Refer to operating
instructions for your iPod/iPhone.)
I can’t play back BD-Live.
≥ The SD card is write-protected. (> 11)
≥ Confirm that this unit is connected to the broadband Internet.
(> 18)
≥ Confirm the “BD-Live Internet Access” settings. (> 38)
≥ Confirm an SD Card is inserted into the SD Card slot. (> 22)
The TV input channel unintentionally changes to HDMI input.
Alternative soundtrack and subtitles cannot be selected.
≥ The languages are not recorded on the disc.
≥ You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (> 25)
≥
When the main unit is connected with an “HDAVI Control”
compatible TV and VIDEO IN is selected for iPod/iPhone video
or photo playback, the TV input channel will automatically
change to the HDMI input channel when [START] is pressed.
jRe-select the TV’s VIDEO IN input channel.
Angle cannot be changed.
≥ Angles can only be changed during scenes where different
angles are recorded.
VQT2Q52
44
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI ONLY
Messages
≥ Some BD-Video discs can only be output with HDMI.
The following messages or service numbers appear on the
television or unit’s display when something unusual is detected
during startup and use.
NET
≥ Displays while VIERA CAST is starting up.
No PLAY
On the television
≥ There is a viewing restriction on a BD-Video or DVD-Video.
(> 37)
Cannot play.
≥ You inserted an incompatible disc.
No READ
≥ The media is dirty or badly scratched. The unit cannot play.
Cannot play on this unit.
≥ You tried to play a non-compatible image.
PLEASE WAIT
≥ The unit is carrying out internal process. This is not a
malfunction. You cannot operate the unit while “PLEASE
WAIT” is displayed.
No disc is inserted.
≥ The disc may be upside down.
$ This operation is not available.
≥ Some operations are unsupported by the unit. For example;
REMOVE
≥ The USB device is drawing too much power. Remove the
USB device.
– BD-Video: During playback, reverse slow-motion or
reverse frame-by-frame is not possible.
IP address is not set.
SET
≥ The “IP Address” in “IP Address / DNS Settings” is “---. ---.
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address acquisition if
necessary.)
(“ ” stands for a number.)
≥ The remote control and main unit are using different codes.
Change the code on the remote control. (> 22)
H or F
(“ ” stands for a number.)
≥ Check and correct the speaker cable connections.
≥ There is something unusual.
≥ Check the unit using the troubleshooting guide. If the service
number does not disappear, do the following.
(When using the optional wireless LAN adaptor: DY-WL10)
The current security setting of Wireless LAN is low. It is
recommended to change the setting.
≥ Authentication type for the Wireless LAN is set to “Open
system”, or the encryption type is set to “No encryption”. It is
recommended to encrypt for safety reasons. For details,
refer to the instructions of the Wireless router being used.
Encryption is required when playing back video, etc., from
DLNA compatible devices.
1
Disconnect the plug from the household mains socket, wait
a few seconds, then reconnect it.
2
Press [Í/I] to turn the unit on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
No Video
≥ Depending on the connected iPod/iPhone, video menu may
not be available on the TV. Select “ALL” on the unit’s display
and operate video playback from your iPod/iPhone menu.
(> 33)
UPD/
(“ ” stands for a number.)
≥ The firmware is being updated.
Please do not turn off the unit.
On the unit’s display
IPOD OVER CURRENT ERROR
F99
≥ The iPod/iPhone is drawing too much power. Remove the
iPod/iPhone, and turn the unit off and on again.
≥ The unit fails to operate properly. Press [Í] on the main unit
to switch the unit to standby for 3 seconds. Now press [Í]
on the main unit again to turn the unit on.
START
≥ The system is being restarted during the firmware update.
Please do not turn the unit off.
U59
≥ The unit is hot.
The unit switches to standby for safety reasons. Wait for
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the
unit. Do not block the ventilation hole on the rear and side of
the unit.
FINISH
≥ The firmware update is completed.
NOT CONDITIONAL
≥ The requested operation cannot be conducted.
U72
U73
≥ The HDMI connection acts unusually.
– Turn the unit and TV off.
– Disconnect the HDMI cable between the player and the
TV.
VQT2Q52
45
Download from Www.Somanuals.com. All Manuals Search And Download.
About MP3/JPEG/DivX/
AVCHD/MPEG2 files
Subtitles text file of DivX
File format
Subtitles text file of DivX
File format
Extension
MicroDVD, SubRip, or TMPlayer
Files must have the extension “.SRT”,
“.srt”, “.SUB”, “.sub”, “.TXT”, or “.txt”
MP3
Reference
≥ The DivX video file and subtitles text file
are inside the same folder, and the file
names are the same except for the file
extensions.
≥ Depending on the methods used to
create the file or the state of the
recording, only parts of the subtitles may
be displayed, or the subtitles may not be
displayed at all.
File format
Extension
MP3
Files must have the extension “.mp3” or
“.MP3”.
Compression 32 kbps to 320 kbps
rate
Sampling rate 44.1 kHz/48 kHz
Reference
ID3 tags: version 1, 2.2, 2.3, 2.4
(Only titles and the names of artists)
AVCHD
JPEG
File format
AVCHD format (V1.0) used on High
Definition Video Camera
File format
Extension
JPEG
(Panasonic and some other’s)
Files must have the extension “.jpg” or
“.JPG”.
Codec
MPEG-4 AVC/H.264
Picture
between 34k34 and 8192k8192 pixels
≥ Discs must conform to UDF 2.5.
resolution
(sub sampling is 4:2:2 or 4:2:0)
Reference
JPEG conforming DCF* is supported.
≥ MOTION JPEG and Progressive JPEG is
not supported.
MPEG2
File format
SD-Video format* used on Standard
Definition Video Camera
(Panasonic and some other’s)
* Design rule for Camera File system: unified standard
established by Japan Electronics and Information
Technology Industries Association (JEITA).
≥ DVD-RAM must conform to UDF 2.0.
Codec
MPEG2
* SD-Video Entertainment Video Profile
≥ BD-RE must conform to UDF 2.5.
DivX
≥ With certain recording states and folder structures, the play order may
differ or playback may not be possible.
≥ CD-R, CD-RW: ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
≥ DVD-R, DVD-R DL (except for AVCHD): ISO9660 level 1 or 2 (except for
extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)
This unit is not compatible with multi-session.
File format
Extension
DivX
Files must have the extension “.DIVX”,
“.divx”, “.AVI” or “.avi”.
Picture
resolution
This unit is not compatible with packet writing.
Up to 1920k1080 pixels
Reference
≥ DivX certified to play DivX video up to HD
1080p, including premium content.
Video
Structure of folders that can be
played in this unit
jNumber of stream: Up to 1
– Codec: DIV3, DIV4, DIVX, DX50, DIV6
– FPS (Frame Per Second): Up to 60 fps
Audio
jNumber of stream: Up to 8
jFormat: MP3, MPEG, Dolby Digital
jMulti channel: Dolby Digital is possible.
MPEG multi is 2 ch conversion.
≥ GMC (Global Motion Compensation) is
not supported.
You can play files on this unit by structure of folders as
shown below. However depending on the method of
writing data (writing software), play may not be in the
order you numbered the folders.
: Folder which can be displayed with this unit
¢¢¢: Numbers
XXX: Letters
*1 ¢¢¢: from 001 to 999
*2 ¢¢¢: from 100 to 999
XXXXX: 5 figures
*3 ¢¢¢¢: from 0001 to 9999
XXXX: 4 figures
≥ DVD-R and DVD-R DL must conform to UDF 1.02 without
ISO9660 and UDF 1.5 with ISO9660.
≥ BD-R must conform to UDF 2.5.
VQT2Q52
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Structures of still picture (JPEG) folders
in DVD-R*4/DVD-R DL*4/
Supplemental
information
Root
e.g.,
CD-R*5/CD-RW*5
P0000001.jpg
P0000002.jpg
Files inside a folder are
displayed in the order they
were updated or taken.
Folder A
P0000003.jpg
P0000004.jpg
P0000005.jpg
∫ Display languages list
Folder B
Display Language Display Language Display Language
P0000006.jpg
P0000007.jpg
P0000008.jpg
P0000009.jpg
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
JPN
CHI
Japanese
Chinese
Korean
Malay
ARA
HIN
Arabic
Hindi
Folder C
P0000010.jpg
P0000011.jpg
P0000012.jpg
German
Italian
KOR
MAL
VIE
PER
IND
Persian
Indonesian
Maori
Spanish
Dutch
Vietnamese
Thai
MRI
BUL
RUM
GRE
TUR
THA
POL
CES
SLK
HUN
FIN
Bulgarian
Romanian
Greek
in BD-RE*6/DVD-RAM*4
Folder structure is not
displayed.
Swedish
Norwegian
Danish
Polish
Root
Czech
P0000001.jpg
e.g.,
P0000002.jpg
Slovak
Turkish
Others
Portuguese
Russian
Hungarian
Finnish
JPEG
*1
DCIM
*2
XXXXX
*3
XXXX.jpg
∫ Video attribute
DCIM
*2
XXXXX
Display
Meaning
*3
XXXX.jpg
MPEG-2/MPEG-4 AVC/VC-1
480/576/720/1080
Video recording method
Video Format
24p/50i/60i/50p/60p
Video Frame rate
Colour Space
YCbCr4:2:2/YCbCr4:4:4/RGB
bps (bit per second)
Root
Transfer rate of bit
in SD card*4/USB device*4
Displays JPEG files in all
folders.
e.g.,
P0000001.jpg
P0000002.jpg
∫ Audio attribute
Folder structure is not
DCIM
displayed.
Display
Meaning
*2
XXXXX
*3
XXXX.jpg
LPCM/
Digital/
Digital+/
Signal type
TrueHD/DTS/DTS 96/DTS-HD HI RES/
DTS-HD MSTR/MPEG
Folder A
P0000003.jpg
P0000004.jpg
ch (channel)
k (kHz)
Number of channels
Sampling frequency
Number of bits
b (bit)
Structure of MP3 folders
in DVD-R/DVD-R DL/CD-R/
bps (bit per second)
Transfer rate of bit
Root
∫ Language code list
001XXXX.mp3
e.g.,
002XXXX.mp3
CD-RW/USB device
Prefix the file names with
3-digit numbers in the order
you want to play them.
Folder A
003XXXX.mp3
004XXXX.mp3
005XXXX.mp3
Language Code Language Code Language Code
Abkhazian
Afar:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
7185 Rhaeto-Romance:
7265
8277
Afrikaans:
Albanian:
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
8279
8285
8377
8365
Folder B
006XXXX.mp3
007XXXX.mp3
008XXXX.mp3
009XXXX.mp3
Amharic
Arabic:
:
6577 Hungarian:
6582 Icelandic:
7289 Indonesian:
6583 Interlingua:
6589 Irish:
Armenian:
Assamese:
Aymara:
7378 Scots Gaelic: 7168
7365 Serbian: 8382
Folder C
010XXXX.mp3
011XXXX.mp3
012XXXX.mp3
7165 Serbo-Croatian: 8372
Azerbaijani:
Bashkir:
Basque:
6590 Italian:
7384 Shona:
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
6665 Japanese:
6985 Javanese:
Kannada:
7465 Sindhi:
Structure of DivX folders
7487 Singhalese:
7578 Slovak:
7583 Slovenian:
7575 Somali:
7589 Spanish:
7579 Sundanese:
7585 Swahili:
7679 Swedish:
7665 Tagalog:
Bengali; Bangla:
in BD-R*7/DVD-R*7/DVD-R
Root
6678 Kashmiri:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
P0000001.divx
DL*7/CD-R*7/CD-RW*7/USB
e.g.,
P0000002.divx
Bhutani:
Bihari:
device*7
Folder A
P0000003.divx
P0000004.divx
P0000005.divx
Files inside a folder are
displayed in the order they
were updated or taken.
Breton:
Bulgarian:
Burmese:
Folder B
Byelorussian: 6669 Latin:
P0000006.divx
P0000007.divx
P0000008.divx
P0000009.divx
Cambodian:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
7577 Latvian, Lettish: 7686 Tajik:
6765 Lingala:
9072 Lithuanian:
6779 Macedonian:
7282 Malagasy:
6783 Malay:
7678 Tamil:
7684 Tatar:
Folder C
P0000010.divx
P0000011.divx
P0000012.divx
7775 Telugu:
7771 Thai:
7783 Tibetan:
7776 Tigrinya:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
6865 Malayalam:
7876 Maltese:
6978 Maori:
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
7073 Nepali:
7082 Norwegian:
7089 Oriya:
*4 The total combined maximum number of recognizable picture contents
and folders: 3000 picture contents and 300 folders.
*5 The total combined maximum number of recognizable picture contents
and folders: 999 picture contents and 99 folders.
*6 The total combined maximum number of recognizable picture contents
and folders: 9999 picture contents and 300 folders.
*7 The total combined maximum number of recognizable file contents and
folders: 200 file contents and 300 folders.
7778 Ukrainian:
7865 Urdu:
7869 Uzbek:
7879 Vietnamese:
7982 Volapük:
7176 Pashto, Pushto: 8083 Welsh:
7565 Persian:
6869 Polish:
6976 Portuguese:
7576 Punjabi:
7178 Quechua:
7065 Wolof:
8076 Xhosa:
8084 Yiddish:
8065 Yoruba:
8185 Zulu:
VQT2Q52
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United States and
other countries.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License, Version
2 (GPL v2),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed under the
GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to the terms and
conditions of GPL v2 and LGPL v2.1, as the case may be at
In addition, the software categorized as (3) and (4) are copyrighted by
several individuals.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide patents issued &
pending.
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD
Master Audio | Essential and the DTS logos are trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights Reserved.
This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is prohibited.
Please refer to the copyright notice of those individuals at
The GPL/LGPL software is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1
patent portfolio license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC Standard and
VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video
that was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video provider
licensed to provide AVC/VC-1 Video. No license is granted or shall be
implied for any other use. Additional information may be obtained from
At least three (3) years from delivery of products, Panasonic will give to
any third party who contacts us at the contact information provided below,
for a charge no more than our cost of physically performing source code
distribution, a complete machine-readable copy of the corresponding
source code covered under GPL v2/LGPL v2.1.
Contact Information
HDAVI ControlTM is a trademark of Panasonic Corporation.
x.v.ColourTM is a trademark.
Source code is also freely available to you and any other member of the
public via our website below.
VIERA CAST is a trademark of Panasonic Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation
and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
“Blu-ray Disc” is a trademark.
DivX® is a registered trademark of DivX, Inc., and is used under license.
“BD-Live” logo is a trademark of Blu-ray Disc Association.
“BONUSVIEW” is a trademark of Blu-ray Disc Association.
YouTube and Picasa are trademarks of Google, Inc.
“
Made for iPod” means that an electronic
accessory has been designed to connect
specifically to iPod and has been certified by the
developer to meet Apple performance standards.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifically to iPhone and has
been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation
of this device or its compliance with
safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
iPhone is a trademark of Apple Inc.
DLNA®, the DLNA Logo and DLNA CERTIFIEDTM are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
Windows is a registered trademark of Microsoft Corporation in the United
States and other countries.
VQT2Q52
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
AVCHD
DTS-HD High Resolution Audio
AVCHD is a new format (standard) for high definition video
cameras that can be used to record and play high-resolution
HD images.
This is a signal format achieved by improving the previous
DTS, DTS-ES and DTS 96/24 formats. It is compatible with
sampling frequency 96 kHz/48 kHz. BD-Video supports up to
7.1 channel output.
BD-J
Some BD-Video discs contain Java applications, and these
applications are called BD-J. You can enjoy various interactive
features in addition to playing normal video.
DTS-HD Master Audio | Essential
This is a lossless audio format and compatible with 96 kHz/
7.1 ch and 192 kHz/2 ch or less. In addition, faithful
reproduction of the master audio is enabled using lossless
audio encoding technology. BD-Video supports up to
7.1 channel output.
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1
channel) before it is decoded into its various channels.
Dynamic range
Deep Colour
Dynamic range is the difference between the lowest level of
sound that can be heard above the noise of the equipment and
the highest level of sound before distortion occurs.
Dynamic range compression means reducing the gap between
the loudest and softest sounds. This means you can listen at
low volumes but still hear dialogue clearly.
This unit incorporates HDMI (V.1.4, Content Type) technology
that can reproduce greater colour gradation (4096 steps) when
connected to a compatible TV.
You can enjoy exceptionally rich, natural-looking colours, with
smooth, detailed gradation and minimal colour banding.
[A lower colour gradation (256 steps), without Deep Colour, will
be reproduced if connected to a TV which does not support
Deep Colour.
HDMI (High-Definition Multimedia Interface)
The unit will automatically set appropriate output to suit the
connected TV.]
HDMI is a digital interface for consumer electronic products.
Unlike conventional connections, it transmits uncompressed
digital video and audio signals on a single cable.
DLNA (Digital Living Network Alliance)
DLNA is a standard that makes DLNA Certified digital
electronics easier and more convenient to use on a home
network.
Local storage
This storage area is used as a destination for sub contents for
playing BD-Live on BD-Video.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these
signals can also be multi-channel audio.
LPCM (Linear PCM)
These are a kind of PCM format.
These are uncompressed digital signals, similar to those found
on CDs.
Dolby Digital Plus
Multi-channel audio and higher audio quality is made possible
using Dolby Digital Plus. BD-Video supports up to 7.1 channel
output.
PCM (Pulse Code Modulation)
This is one format for converting analogue audio into digital
audio, enabling you to enjoy digital audio with no hassle.
Dolby Pro Logic II
Dolby Pro Logic II enables you to play stereo sources on 5.1
channel.
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which makes use of an exclusive
Panasonic algorithm. Various processing is supported,
including a high-level conversion of the TV scanning format
from interlace to progressive and a high-level conversion of
standard resolution (480i or 576i) video signal to a 1080 High
Definition video signal.
Dolby TrueHD
Dolby TrueHD is a very high quality audio format that
reproduces the studio master audio. BD-Video supports up to
7.1 channel output.
Consequently, this unit is able to provide video of optimal
resolution to the connected TV.
Down-mixing
x.v.ColourTM
This is the process of remixing the multi-channel audio found
on some discs into fewer channels.
x.v.ColourTM is a name for devices that are compatible with the
xvYCC format, an international standard for expanded colour
in motion pictures, and that follow the rules for signal
transmission.
DTS (Digital Theater Systems)
This surround system is used in many movie theatres. There is
good separation between the channels, so realistic sound
effects are possible.
You can enjoy vivid colours of wider colour ranges for a more
realistic picture when connected to a TV that supports the
x.v.ColourTM with HDMI cable.
DTS-HD
DTS-HD is a high-quality, sophisticated audio format used in
movie theatres. Previous DTS Digital Surround-compatible
equipment can play DTS-HD as DTS Digital Surround audio.
BD-Video supports up to 7.1 channel output.
24p
This is a progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie contents
are recorded in 24 frames/second in accordance with the film
materials.
VQT2Q52
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GENERAL
FM TUNER SECTION
Preset memory:
30 stations
Power consumption:
100 W
Frequency range: 87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals:75 ≠ (unbalanced)
Power consumption in
standby mode
[BT735] [BT330]
[BT230]
Approx. 0.1 W
Approx. 0.2 W
SPEAKER SECTION
Power supply:
AC 220 V to 240 V, 50 Hz
FRONT SPEAKERS
[BT735] SB-HF730
Type:
Woofer:
iPod/iPhone Connector:
WIRELESS LAN Connector: DC OUT 5 V 500 mA
(USB 2.0 standard)
Dimensions (WkHkD):
DC OUT 5 V 500 mA MAX
2 WAY 3 SPEAKER Bass-ref.
3.5 cm k 10 cm
CONE TYPEk 2
2.5 cm SEMI-DOME TYPE
3 ≠
430 mmk54 mmk287 mm
Approx. 3.1 kg
(Dimensions and Weight do not
include speakers)
Mass:
Tweeter:
Impedance:
Output sound pressure: 78 dB/W (1 m)
Frequency range:
Operating temperature
range:
Operating humidity range: 35 % to 80 % RH
100 Hz to 30 kHz (j16 dB),
0 oC to 40 oC
130 Hz to 25 kHz (j10 dB)
255 mmk1023 mmk255 mm
Approx. 2.3 kg
Dimensions (WkHkD):
Mass:
(no condensation)
[BT330] SB-HF330
Type:
Full range:
Impedance:
1 WAY 1 SPEAKER Bass-ref.
6.5 cm CONE TYPE
3 ≠
AMPLIFIER SECTION
RMS TTL POWER OUTPUT: 1000 W
Output sound pressure: 78 dB/W (1 m)
1 kHz, 10 % total harmonic distortion
Frequency range:
85 Hz to 25 kHz (j16 dB),
FRONT:
CENTRE:
SURROUND:
100 Hz, 10 % total harmonic distortion
SUBWOOFER:
125 W per ch (3 ≠)
250 W per ch (6 ≠)
125 W per ch (3 ≠)
95 Hz to 22 kHz (j10 dB)
100 mmk530 mmk78 mm
Approx. 0.92 kg
Dimensions (WkHkD):
Mass:
Full assembly with stand base
250 W per ch (6 ≠)
Dimensions (WkHkD)
Max:
Min:
Mass:
255 mmk1020 mmk255 mm
255 mmk550 mmk255 mm
Approx. 2.3 kg
DIN TTL POWER OUTPUT: 590 W
1 kHz, 1.0 % total harmonic distortion
FRONT:
90 W per ch (3 ≠)
CENTRE:
SURROUND:
100 Hz, 1.0 % total harmonic distortion
SUBWOOFER: 115 W per ch (6 ≠)
115 W per ch (6 ≠)
90 W per ch (3 ≠)
[BT230] SB-HF230
Type:
Full range:
Impedance:
1 WAY 1 SPEAKER Bass-ref.
6.5 cm CONE TYPE
3 ≠
Output sound pressure: 78 dB/W (1 m)
Frequency range:
105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz (j10 dB)
80 mmk118.5 mmk68 mm
Approx. 0.4 kg
Dimensions (WkHkD):
Mass:
VQT2Q52
50
Download from Www.Somanuals.com. All Manuals Search And Download.
CENTRE SPEAKER
[BT735] SB-HC730
Type:
VIDEO SECTION
2 WAY 3 SPEAKER Bass-ref.
3.5 cm k 10 cm
Woofer:
Signal system:
PAL625/50, PAL525/60, NTSC
CONE TYPEk 2
Video output
Tweeter:
Impedance:
Output sound pressure:
Frequency range:
2.5 cm SEMI-DOME TYPE
6 ≠
78 dB/W (1 m)
100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz (j10 dB)
424 mmk59 mmk76 mm
Approx. 1.06 kg
Output level:
1.0 Vp-p (75 ≠)
Pin jack (1 system)
Output connector:
HDMI AV output
Output format:
480p (525p)/1080i (1125i)/
720p (750p)/1080p (1125p)
Type A (19 pin)
HDMI (V.1.4, Content Type)
This unit supports “HDAVI
Control 5” function.
Dimensions (WkHkD):
Mass:
Output connector:
[BT330] [BT230] SB-HC230
Type:
Full range:
Impedance:
Output sound pressure:
Frequency range:
LASER Specification
Class 1 LASER Product
Wave length:
1 WAY 1 SPEAKER Bass-ref.
6.5 cm CONE TYPE
6 ≠
790 nm (CDs)/655 nm (DVDs)/
405 nm (BDs)
No hazardous radiation is
emitted with the safety
protection
79 dB/W (1 m)
90 Hz to 25 kHz (j16 dB),
115 Hz to 22 kHz (j10 dB)
145 mmk85 mmk71.5 mm
Approx. 0.6 kg
Laser power:
Dimensions (WkHkD):
Mass:
SURROUND SPEAKERS
[BT735] SB-HS735
Type:
TERMINAL SECTION
2 WAY 3 SPEAKER Bass-ref.
3.5 cm k 10 cm
CONE TYPEk 2
2.5 cm SEMI-DOME TYPE
3 ≠
78 dB/W (1 m)
100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz (j10 dB)
255 mmk1023 mmk255 mm
Approx. 2.3 kg
USB:
(Front)
USB port power:
Bit rate:
(Rear)
Woofer:
USB 2.0 High Speed
Max 500 mA
Up to 4 Mbps (DivX)
USB 2.0 (Use for Wireless LAN
Adaptor only)
Tweeter:
Impedance:
Output sound pressure:
Frequency range:
Ethernet:
SD card slot:
10BASE-T/100BASE-TX 1 system
Connector: 1 system
Dimensions (WkHkD):
Mass:
[BT735] [BT330] Calibration Mic
Sensitivity:
Terminal:
100 mV, 4.7 k≠
Mono, 3.5 mm
[BT330] [BT230] SB-HS230
Type:
Full range:
Impedance:
Output sound pressure:
Frequency range:
1 WAY 1 SPEAKER Bass-ref.
6.5 cm CONE TYPE
3 ≠
Audio Input
AUX:
k 1
78 dB/W (1 m)
105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz (j10 dB)
80 mmk118.5 mmk68 mm
Approx. 0.4 kg
Digital Audio Input
Optical:
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: PCM, Dolby Digital
k 2
Dimensions (WkHkD):
Mass:
SUBWOOFER
[BT735] [BT330] SB-HW330
Type:
Specifications are subject to change without notice.
1 WAY 1 SPEAKER (Kelton
type)
Woofer:
Passive radiator:
Impedance:
16 cm CONE TYPE
25 cm
6 ≠
Output sound pressure:
Frequency range:
78 dB/W (1 m)
35 Hz to 180 Hz (j16 dB),
40 Hz to 160 Hz (j10 dB)
180.5 mmk322 mmk351 mm
Approx. 4.6 kg
Dimensions (WkHkD):
Mass:
[BT230] SB-HW480
Type:
Woofer:
1 WAY 1 SPEAKER Bass- ref.
16 cm CONE TYPE
6 ≠
Impedance:
Output sound pressure:
Frequency range:
78 dB/W (1 m)
40 Hz to 220 Hz (j16 dB),
45 Hz to 180 Hz (j10 dB)
145 mmk289.5 mmk258 mm
Approx. 2.8 kg
Dimensions (WkHkD):
Mass:
VQT2Q52
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
H
HDMI . . . . . . . . . . . . . . . . . . . . . . . . 16, 49
High Clarity Sound. . . . . . . . . . . . . 35, 38
I
R
AC mains lead connection . . . . . . . . . .18
Angle . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Audio
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Random play . . . . . . . . . . . . . . . . . . . . 35
Re-master. . . . . . . . . . . . . . . . . . . . . . . 35
Remote control
Remote control code. . . . . . . . . . . . 22
Using the remote control. . . . . . . . . . 7
Repeat play . . . . . . . . . . . . . . . . . . . . . 35
Attribute . . . . . . . . . . . . . . . . . . . . . .47
Changing audio during play . . . . . . .25
Channel . . . . . . . . . . . . . . . . . . . . . .34
Language . . . . . . . . . . . . . . . . . . . . .37
AVCHD . . . . . . . . . . . . . . . . . . . . . . .46, 49
iPod/iPhone. . . . . . . . . . . . . . . . . . . . . . 32
IP address . . . . . . . . . . . . . . . . . . . . . . . 40
J
JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
L
Resume play function . . . . . . . . . . . . . 25
S
B
BD-J . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
BD-Live. . . . . . . . . . . . . . . . . . . . . . . . . .26
BD-Video Ratings . . . . . . . . . . . . . . . . .37
BONUSVIEW . . . . . . . . . . . . . . . . . . . . .26
C
LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Language
SD card. . . . . . . . . . . . . . . . . . . . . . 11, 26
Search . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setup menu . . . . . . . . . . . . . . . . . . . . . 37
Skip. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Sleep timer . . . . . . . . . . . . . . . . . . . . . . . 8
Slideshow. . . . . . . . . . . . . . . . . . . . . . . 28
Slow-motion. . . . . . . . . . . . . . . . . . . . . 25
Soundtrack. . . . . . . . . . . . . . . . . . . . . . 34
Status Message . . . . . . . . . . . . . . . . . . 25
Still picture. . . . . . . . . . . . . . . . . . . . . . 28
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . 34
Surround sound. . . . . . . . . . . . . . . . . . 24
V
Audio . . . . . . . . . . . . . . . . . . . . . . . . 37
Code list. . . . . . . . . . . . . . . . . . . . . . 47
Menu . . . . . . . . . . . . . . . . . . . . . . . . 38
On-Screen . . . . . . . . . . . . . . . . . . . . 38
Soundtrack. . . . . . . . . . . . . . . . . . . . 34
Subtitle. . . . . . . . . . . . . . . . . . . . 34, 38
Local storage . . . . . . . . . . . . . . . . . . . . 49
Chapter. . . . . . . . . . . . . . . . . . . . . . . . . .26
Cleaning
Disc. . . . . . . . . . . . . . . . . . . . . . . . . . .7
Lens . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main unit . . . . . . . . . . . . . . . . . . . . . . .7
Connection
Antenna . . . . . . . . . . . . . . . . . . . . . .15
AUX . . . . . . . . . . . . . . . . . . . . . . . . .16
DVD recorder . . . . . . . . . . . . . . . . . .17
HDMI. . . . . . . . . . . . . . . . . . . . . . . . .17
iPod/iPhone . . . . . . . . . . . . . . . . . . .32
OPTICAL IN . . . . . . . . . . . . . . . .16, 17
Set Top Box . . . . . . . . . . . . . . . . . . .17
Speaker . . . . . . . . . . . . . . . . . . . . . .15
TV . . . . . . . . . . . . . . . . . . . . . . . . . . .16
USB . . . . . . . . . . . . . . . . . . . . . . . . .22
Video cassette recorder . . . . . . . . . .17
Wireless LAN . . . . . . . . . . . . . . . . . .18
Wireless system . . . . . . . . . . . . . . . .14
D
LPCM . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
M
Menu
Playback . . . . . . . . . . . . . . . . . . . . . 34
Pop-up . . . . . . . . . . . . . . . . . . . . . . . 25
Setup . . . . . . . . . . . . . . . . . . . . . . . . 37
MPEG2. . . . . . . . . . . . . . . . . . . . . . . . . . 46
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Mute the sound. . . . . . . . . . . . . . . . . . . . 8
O
VIERA CAST. . . . . . . . . . . . . . . . . . . . . 34
VIERA Link “HDAVI ControlTM” . . . . . 31
W
Whisper-mode Surround . . . . . . . . . . 24
X
x.v.ColourTM . . . . . . . . . . . . . . . . . . . . . 49
On-Screen
Language. . . . . . . . . . . . . . . . . . . . . 38
Status Message . . . . . . . . . . . . . . . . 25
P
Picture-in-picture . . . . . . . . . . . . . . . . . 26
Playback
AVCHD . . . . . . . . . . . . . . . . . . . . . . 25
DivX . . . . . . . . . . . . . . . . . . . . . . . . . 27
JPEG . . . . . . . . . . . . . . . . . . . . . . . . 28
MPEG2 . . . . . . . . . . . . . . . . . . . . . . 25
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . 27
Playback Information Window . . . . . . 35
Playlists. . . . . . . . . . . . . . . . . . . . . . . . . 23
Pop-up menu . . . . . . . . . . . . . . . . . . . . 25
Product Disposal . . . . . . . . . . . . . . . . . . 7
Progressive. . . . . . . . . . . . . . . . . . . . . . 35
Properties
Title . . . . . . . . . . . . . . . . . . . . . . . . . 26
Still picture . . . . . . . . . . . . . . . . . . . . 28
Proxy Server . . . . . . . . . . . . . . . . . . . . . 40
24p . . . . . . . . . . . . . . . . . . . . . . 35, 39, 49
Deep Colour. . . . . . . . . . . . . . . . . . . . . .49
Default Settings. . . . . . . . . . . . . . . . . . .40
Dialog Enhancer . . . . . . . . . . . . . . . . . .35
Direct Navigator . . . . . . . . . . . . . . . . . .25
Disc and card handling. . . . . . . . . . . . . .7
DivX . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
DLNA . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Dolby Digital . . . . . . . . . . . . . . . . . .38, 49
Dolby Digital Plus . . . . . . . . . . . . . .38, 49
Dolby Pro Logic II . . . . . . . . . . . . . .24, 49
Dolby TrueHD . . . . . . . . . . . . . . . . .38, 49
DTS. . . . . . . . . . . . . . . . . . . . . . . . . .38, 49
DTS-HD. . . . . . . . . . . . . . . . . . . . . . .38, 49
F
P4HD . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Q
Finalize. . . . . . . . . . . . . . . . . . . . . . . . . .11
Firmware update . . . . . . . . . . . . . . . . . .21
Formatting SD cards. . . . . . . . . . . . . . .26
Frame-by-frame. . . . . . . . . . . . . . . . . . .25
Quick Start . . . . . . . . . . . . . . . . . . . . . . 40
EU
Panasonic Corporation
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Panasonic Corporation 2010
VQT2Q52
F0210SB0
Download from Www.Somanuals.com. All Manuals Search And Download.
|