MCB395
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Quick Start Guide
User Manual
Pull out the plastic
protective sheet
before use.
Remote control with
1 x CR2025 battery
Quick start guide
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON 2 on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
1
In the standby mode, press and hold CLOCK on the remote control.
➜ The clock digits for the hours continue to flash.
2
3
Adjust VOLUME -/+ (or press VOL +/- on the remote control) to set the hours.
Press CLOCK to confirm.
➜ The minute digits start flashing.
4
5
Adjust VOLUME -/+ (or press VOL +/- on the remote control) to set the minutes.
Press CLOCK to confirm the time.
C
Enjoy
Notes for remote control:
–
First select the source you wish to control by pressing one of the source select
keys on the remote control (for example FM, DISC).
Then select the desired function (for exampleÉ, S , T).
–
Playing a disc
1
Press OPEN/CLOSEç to open the disc tray and load in a disc, then press the same
button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
t
e
ct
2
3
Press ÉÅ to start playback.
To stop playback, press 9.
iPod playback via the USB
port cannot be guaranteed.
Playing a USB mass storage device
With the Hi-Fi system,you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
2
3
Insert the USB device’s USB plug into the socket
on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
C
Enjoy
Programming and tuning to FM radio
stations
1
Press SOURCE repeatedly (or FM on the remote control) to select the
tuner source.
2
Press PROG on the remote control) for more than two seconds to
program all available stations in order of waveband.
3
Press ALBUM/PRESET 4 or 3 (or ¡ / ™ on the remote control) until
the desired preset station is displayed.
Tuning to DAB stations
1
Press SOURCE on the system to select DAB (or press DAB on the remote control) to start
automatic search for available DAB stations.
2
Press SCAN to search for all band III frequencies.
3
At the completion of full scan, press ALBUM/PRESET 4 or 3 (or ¡ / ™ on the remote
control) to select your desired DAB channels backward/forward.
4
Press ENTER/ÉÅ to confirm and tune to your selected channel.
Tip
– See the User Manuals for detailed instructions on DAB
operations.
Printed in China
PDCC-JS_JW-0716
Download from Www.Somanuals.com. All Manuals Search And Download.
|