Always there to help you
Register your product and get support at
Question?
Contact
Philips
HTS3541
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
•
the ASTA approval mark.
1 Notice
Contact your dealer if you are not sure about
what type of fuse to use.
Caution:To conform with the EMC directive
(2004/108/EC), do not detach the plug from
the power cord.
This section contains the legal and trademark
notices.
Copyright
Open source software
Philips Electronics Singapore Pte Ltd hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages
used in this product for which such offer is
requested by the respective licenses.This offer
is valid up to three years after product purchase
to anyone in receipt of this information.To
obtain source code, please contact open.
[email protected]. If you prefer not to use
email or if you do not receive confirmation
receipt within a week after mailing to this email
address, please write to "Open SourceTeam,
Philips Intellectual Property & Standards, P.O.
Box 220, 5600 AE Eindhoven,The Netherlands".
If you do not receive timely confirmation
of your letter, please email to the email
address above.The texts of the licenses and
acknowledgements for open source software
used in this product are included on a separate
leaflet.
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Copyright in the UK
Recording and playback of material may require
consent. See Copyright Act 1956 andThe
Performers Protection Acts 1958 to 1972.
Compliance
This product is in compliance with the essential
requirements and other relevant provisions
of Directives 2006/95/EC (LowVoltage),
2004/108/EC (EMC).
Trademarks
Mains fuse (UK only)
"Blu-ray Disc", "Blu-ray" and "Blu-ray Disc" logo
are trademarks of Blu-ray Disc Association.
This information applies only to products with a
UK mains plug.
This product is fitted with an approved molded
plug. If you replace the fuse, use one with:
•
•
the ratings shown on the plug,
a BS 1362 approval, and
3
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
software tools to convert your files into DivX
video.
ABOUT DIVXVIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation.This is an official DivX
Certified® device that plays DivX video.Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVXVIDEO-ON-DEMAND:This
DivX Certified® device must be registered
in order to play purchased DivXVideo-on-
Demand (VOD) movies.To obtain your
registration code, locate the DivXVOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or
other countries.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872
& other U.S. and worldwide patents issued
& pending. DTS-HD, the Symbol, & DTS-
HD and the Symbol together are registered
trademarks & DTS-HD Master Audio | Essential
is a trademark of DTS, Inc. Product includes
software. DTS, Inc.All Rights Reserved.
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
CLASS 1
LASER PRODUCT
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Covered by one or more of the following
U.S. patents: 7,295,673; 7,460,668; 7,515,710;
7,519,274.
DivX®, DivX Certified®, DivX Plus® HD
and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used
under license.
ABOUT DIVX PLUS® HD: DivX® is a digital
video format created by DivX, Inc.This is an
official DivX Certified® device that plays DivX
video, including DivX® Plus HD video (H.264/.
MKV) up to 1080p and premium content.
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident,
injury or damage.
For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
Never place the product or any objects
on power cords or on other electrical
equipment.
2 Important
Read and understand all instructions before you
use your home theater. If damage is caused by
failure to follow instructions, the warranty does
not apply.
•
•
•
Safety
If the product is transported in
Risk of electric shock or fire!
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Visible and invisible laser radiation when
open.Avoid exposure to beam.
Do not touch the disc optical lens inside
the disc compartment.
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
•
•
•
Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
•
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
•
•
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
Risk of overheating!
•
Never install this product in a confined
space.Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
•
•
Risk of contamination!
•
Do not mix batteries (old and new or
carbon and alkaine, etc.).
•
Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
Risk of short circuit or fire!
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
•
•
Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
Batteries contain chemical substances, they
should be disposed of properly.
Risk of injury or damage to the home theater!
Risk of swallowing batteries!
•
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
•
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
•
•
•
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Care for your product
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
•
Use only microfiber cloth to clean the
product.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Your home
theater
1
2
3
4
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your home
14
15
5
6
7
Main unit
16
17
8
9
18
19
a Disc compartment
10
11
b Display panel
c
d
(Open/Close)
Open or close the disc compartment, or
eject the disc.
12
13
(Play/Pause)
Start, pause or resume play.
20
21
e SOURCE
Select an audio or video source for the
home theater.
f
(Standby-On)
Switch the home theater on or to standby.
Remote control
a
b
(Standby-On)
Switch the home theater on or to
standby.
When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
•
This section includes an overview of the
remote control.
•
(Home)
Access the home menu.
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
c Source buttons
n TOP MENU
Access the main menu of a disc.
•
DISC/POP-UP MENU : Switch to disc
source.Access or exit the disc menu
when you play a disc.
RADIO : Switch to FM radio.
AUDIO SOURCE : Select an audio
input source.
o
OPTIONS
Access more play options while playing
a disc or a USB storage device.
In radio mode, set a radio station.
•
•
•
•
p
q
r
(Play)
Start or resume play.
d
BACK
•
•
Return to a previous menu screen.
In radio mode, press and hold to erase
the current preset radio stations.
(Pause)
Pause play.
e Navigation buttons
(Mute)
Mute or restore volume.
•
Navigate menus.
•
In radio mode, press left or right to
start auto search.
In radio mode, press up or down to
tune the radio frequency.
s AUDIO
Select an audio language or channel.
•
t SUBTITLE
Select subtitle language for video.
f OK
Confirm an entry or selection.
u Color buttons
Select tasks or options for Blu-ray discs.
g
h
i
/
(Previous/Next)
•
•
Skip to the previous or next track,
chapter or file.
In radio mode, select a preset radio
station.
EasyLink controls
(Stop) / (Eject/Open/Close)
Stop play.
Press and hold for three seconds to
open or close the disc compartment,
or eject the disc.
•
•
•
(Standby-On): Press and hold to switch
your home theater,TV and the connected
devices to standby.
(Play):When a video disc is in the disc
compartment, wake up theTV from
standby, and then play a disc.
•
/
(Fast Backward / Fast Forward)
Search backwards or forward. Press
repeatedly to change the search speed.
j
k
+/- (Volume)
Increase or decrease volume.
SOUND SETTINGS
Access or exit sound options.
l Alphanumeric buttons
Enter values or letters (using SMS style
entry).
m REPEAT
Select or turn off repeat mode.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Connect your
home theater
This section helps you connect your home
theater to aTV and other devices.
For information about the basic connections
of your home theater and accessories, see
the quick start guide. For a comprehensive
philips.com.
Note
• For identification and supply ratings, refer to the type
plate at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Note
• Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
reflective surfaces, and speaker acoustics. Experiment
with the speaker positions to find the optimum setting
for you.
Speakers
Follow these general guidelines, and then set up
your speakers.
Position, connect, and set up your speakers for
best surround sound.
1 Seating position:
This is the center of your listening area.
Position
2 FRONT CENTER (front center) speaker:
Place the center speaker directly in front of
the seating position, either above or below
yourTV. Make sure that it is close to your
ear height when you are seated.
Speaker position plays a critical role in setting
up a surround sound effect.
For best results, place your speakers and the
subwoofer as shown below.
3 FRONT LEFT (front left) and FRONT
RIGHT (front right) speakers:
Place the left and right speakers in the
front, and equidistant from the center
speaker in an arc, so that all the three
speakers are at same distance from your
seating position. For best effect, point the
speakers towards the seating position and
place the speakers close to the ear level
(when seated).
4 REAR LEFT (rear left) and REAR RIGHT
(rear right) speakers:
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it. For
best effect, point the speakers towards the
seating position and place the speakers just
above the ear level (when seated).
a
(USB)
Audio, video or picture input from a USB
storage device.
b MUSIC iLINK
Audio input from an MP3 player.
5 SUBWOOFER (subwoofer):
Back connectors
Place the subwoofer at least one meter to
the left or right of theTV. Leave about ten
centimeter clearance from the wall.
Connect
Connect your speakers and the subwoofer to
your home theater as described in the quick
start guide.
a AC MAINS
Connect to the power supply.
Setup
b SPEAKERS
Set up your speakers through the speaker setup
menu.
Connect to the supplied speakers and
subwoofer.
1 Connect your speakers and subwoofer as
described in the Quick start guide.
c ANTENNA FM 75
Signal input from an antenna, cable or
satellite.
2 Press (Home) on your home theater
remote control, and select [Setup] >
[Audio] > [Speaker Setup].
d AUDIO IN-AUX
3 Enter the distance for each speaker, and
then listen to the test tones and change
the volume. Experiment a little with the
speaker positions to find the ideal setting.
Connect to an analog audio output on the
TV or an analog device.
e VIDEO OUT
Connect to the composite video input on
theTV.
f HDMI OUT (ARC)
Connectors
Connect to the HDMI input on theTV.
Connect other devices to your home theater.
g LAN
Connect to the LAN input on a
broadband modem or router.
Front
h DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
i DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
EN 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect toTV
Connect your home theater to aTV to
watch videos.You can listen to audio fromTV
programs through your home theater speakers.
Use the best quality connection available on
your home theater andTV.
Option 2: Connect toTV through
HDMI
Best quality video
If yourTV is not HDMI ARC compliant, connect
your home theater to theTV through a
standard HDMI connection.
Option 1: Connect toTV through
HDMI (ARC)
Best quality video
'Connect audio fromTV and other devices' on
Your home theater supports HDMI version
with Audio Return Channel (ARC). If yourTV
is HDMI ARC compliant, connect your home
theater to theTV through the HDMI ARC
connection for easy and quick setup.
With HDMI ARC, you do not need an
additional audio cable to play audio fromTV
through your home theater.
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
home theater to the HDMI connector on
theTV.
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on
your home theater to the HDMI ARC
connector on theTV.
The HDMI connector on theTV might be
labeled HDMI IN.
The HDMI ARC connector on theTV
might be labeled HDMI IN or HDMI. For
details onTV connectors, see theTV user
manual.
TV
TV
2 On yourTV, turn on HDMI-CEC. For
details, see theTV user manual.
» When you play a disc on your home
theater, the video is automatically
displayed onTV and the audio is
automatically played on the home
theater.
2 On yourTV, turn on HDMI-CEC. For
details, see theTV user manual.
» When you play a disc on your home
theater, the video is automatically
displayed onTV and the audio is
automatically played on the home
theater.
11 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect audio fromTV and
other devices
Note
Play audio fromTV or other devices through
your home theater.
Use the best quality connection available on
yourTV, home theater, and other devices.
• If yourTV has a DVI connector, you can use an HDMI/
DVI adapter to connect toTV.
Option 3: Connect to theTV through
composite video
Note
• The audio connections in this user manual are only
recommendations.You can use other connections too.
• When your home theater andTV are connected
through HDMI ARC, an audio connection is not
required.
Basic quality video
If yourTV does not have HDMI connectors,
connect your home theater to theTV through a
composite connection.A composite connection
does not support high-definition video.
'Connect audio fromTV and other devices' on
Option 1: Connect audio through a
digital optical cable
Best quality audio
Using an optical cable, connect the OPTICAL
connector on your home theater to the
OPTICAL OUT connector on theTV or other
device.
The digital optical connector might be labeled
SPDIF, SPDIF OUT, or OPTICAL.
1 Using a composite video cable, connect
the VIDEO OUT connector on your
home theater to the composite video
connector on theTV.
The composite video connector might be
labeled AV IN, VIDEO IN, COMPOSITE,
or BASEBAND.
TV
TV
Option 2: Connect audio through a
digital coaxial cable
2 On yourTV, switch to the correct video
input.
On your home theater, press SOURCE
repeatedly to select the correct audio
input.
Good quality audio
Using a coaxial cable, connect the COAXIAL
connector on your home theater to the
COAXIAL/DIGITAL OUT connector on the
TV or other device.
The digital coaxial connector might be labeled
DIGITAL AUDIO OUT.
EN 12
Download from Www.Somanuals.com. All Manuals Search And Download.
your home theater to select the correct
audio input.
Internet
Connect your home theater to the internet and
enjoy:
•
'Update software through the Internet' on
Option 3: Connect audio through
analog audio cables
•
Basic quality audio
Using an analog cable, connect the AUX
connectors on your home theater to the
AUDIO OUT connectors on theTV or other
device.
Caution
• Before you try to connect the home theater to
a computer network, familiarize yourself with the
network router and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
VCR
Wired connection
Connect your home theater to your router
through a network cable.
Set up audio for connected devices
What you need
When you connect a device to your home
theater, check the audio settings.
•
•
•
A network router (with DHCP enabled).
A network cable (RJ45 straight cable).
For BD-Live application and software
update, make sure that the network router
has access to the Internet and the firewall
is disabled.
1 On yourTV and other devices, turn on
HDMI-CEC. For details, see the user
manual of theTV and the other device.
2 Select 'Amplifier' from theTV speakers
Set up the wired network
Connect your home theater to your router as
shown below, and then switch on the devices.
menu. For details, see theTV user manual.
'Play audio from home theater' on page
If the connected device is not HDMI-CEC
compliant, press SOURCE repeatedly on
13 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LAN
www
2 Turn on yourTV, and switch to the correct
source for the home theater.
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Network] > [Network
Installation] > [Wired (Ethernet)], and
then press OK.
6 Follow the instructions on theTV to
complete the setup.
» The home theater connects to the
internet. If connection fails, select
[Retry], and then press OK.
7 Select [Finish], and then press OK to exit.
Check wired network settings
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Network] > [View Network
Settings], and then press OK.
» The current network settings are
displayed.
EN 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound mode
5 Use your home
theater
Select predefined sound modes to suit your
video or music.
1 Press SOUND SETTINGS.
2 Select SOUND, and then press OK.
This section helps you use the home theater to
play media from a wide range of sources.
3 Press the Navigation buttons (up/down)
to select a setting on the display:
Before you start
•
•
•
MOVIE: Enjoy a cinematic audio
experience, specially enhanced for
movies.
MUSIC: Recreate the original recording
environment of your music, in the
studio or at a concert.
ORIGINAL: Experience the original
sound of your movies and music,
without added sound effects.
NEWS: Hear every word with
optimized speech and clear vocals.
GAMING: Enjoy thrilling arcade
sounds, ideal for action-packed video
games or loud parties.
•
Make the necessary connections described
in the Quick start guide and the user
manual.
•
Switch theTV to the correct source for
the home theater.
Choose sound
•
•
This section helps you choose the ideal sound
for your video or music.
1 Press SOUND SETTINGS.
2 Press the Navigation buttons (left/ right)
4 Press OK to confirm.
to access the sound options on the display.
Sound settings Description
Surround sound mode
SOUND
Select a sound mode.
Select surround sound or
stereo sound.
Experience an immersive audio experience with
surround sound modes.
SURROUND
1 Press SOUND SETTINGS.
TREBLE
MID
Change the high frequency
output.
Change the middle frequency
output.
Change the low frequency
output.
Delay the audio to match the
video.
2 Select SURROUND, and then press OK.
3 Press the Navigation buttons (up/down)
to select a setting from your display:
BASS
•
•
•
AUTO: Surround sound based on the
audio stream.
5CH STER: Enhanced stereo sound.
Ideal for party music.
MULTI-CH: Immersive multi-channel
sound for an enhanced movie
experience.
AUD SYNC
3 Select an option, and then press OK.
BACK to exit.
4 Press
•
STEREO:Two-channel stereo sound.
Ideal for listening to music.
If you do not press a button within a
minute, the menu exits automatically.
4 Press OK to confirm.
15 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
/
Skip to the previous or next track,
chapter or file.
Fast backwards or fast forwards.
Press repeatedly to change the
search speed.
Equalizer
Change the high frequency (treble), mid
frequency (mid), and low frequency (bass)
settings of the home theater.
/
1 Press SOUND SETTINGS.
Navigation Rotate the picture clockwise or
buttons
counter-clockwise.
2 Select TREBLE, MID or BASS, and then
(up/down)
press OK.
SUBTITLE Select subtitle language for video.
3 Press the Navigation buttons (up/down)
DISC
Access or exit the disc menu.
Select an audio language or
channel.
to change the frequency.
AUDIO
4 Press OK to confirm.
REPEAT
Select or turn off repeat mode.
Access the advanced options
Discs
OPTIONS when you play your audio, video,
or media files.
Your home theater can play DVDs,VCDs, CDs,
and Blu-ray discs. It can also play discs that
you’ve made at home, such as CD-R discs of
photos, videos, and music.
For video formats such as DivX:
•
•
To stop play, press
.
To resume the video from where you
stopped, press (Play).
To play the video from the start, press OK.
What you need
•
•
Audio and video connection between your
home theater and theTV.
Display menu forVCD and SVCD
Display the content menu onVCD and SVCD
discs.
•
An audio or a video disc.
1 Press (Home).
Play discs
2 Select [Setup] > [Preference], and then
1 Insert a disc into the home theater.
» YourTV switches to the correct source
and the disc plays automatically.
press OK.
3 Select [VCD PBC] > [On], and then press
OK.
2 If the disc does not play automatically, press
DISC or select [play Disc] in the home
menu, and then press OK.
Note
• To skip the content menu, select [Off].
'Play buttons' on page 16).
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
Play buttons
Button
Action
Navigation Navigate menus.
buttons
1 Press SOUND SETTINGS.
2 Select AUD SYNC, and then press OK.
OK
(Play)
Confirm an entry or selection.
Start or resume play.
Pause play.
3 Press the Navigation buttons (up/down)
to synchronize the audio with the video.
4 Press OK to confirm.
Stop play.
EN 16
Download from Www.Somanuals.com. All Manuals Search And Download.
BonusView on Blu-ray
Note
On Blu-ray discs that support the Bonus
• BD-Live services vary from country to country, and
depend on the disc.
• When you use BD-Live, data on the disc and home
theater are accessed by the content provider.
View, enjoy extra content, such as a director's
commentary, while you watch the main feature.
BonusView is also known as picture-in-picture.
1 Enable BonusView (picture-in-picture) in
Access BD-Live with a USB storage
device
the Blu-ray disc menu.
2 While you play the main feature, press
OPTIONS.
» The options menu is displayed.
3 Select [PIP Selection] > [PIP], and then
press OK.
2 Connect the USB storage device to the
home theater.
» Depending on the video, PIP option [1]
or [2] is displayed.
•
The USB storage device is used
to store the downloaded BD-Live
content.
» The picture-in-picture video is
displayed in a small window.
3 Select the BD-Live icon in the disc menu,
and then press OK.
4 Select [2nd Audio Language] or [2nd
» BD-Live starts to load.The loading
time depends on the disc and your
internet connection.
Subtitle Language], and then press OK.
5 Select the language, and then press OK.
4 Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
item.
Note
• To turn off BonusView, press
Selection] > [Off], and then press OK.
OPTIONS, select [PIP
Clear memory
If your storage device does not have enough
memory for the BD-Live content, clear the
memory on the storage device.
BD-Live on Blu-ray
1 Press (Home).
On Blu-ray discs with BD-Live content, access
additional features, such as internet chats
with the director, latest movie trailers, games,
wallpaper, and ringtones.
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Clear memory], and
then press OK.
» This clears the local memory and
deletes the BD-Live files that you
downloaded on your storage device.
What you need
•
•
•
a Blu-ray disc with BD-Live content
an internet connection
a USB storage device, with at least 1GB of
memory
Disable BD-Live
To restrict access to BD-Live, turn on the BD-
Live security.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [BD-Live security] >
[On], and then press OK.
» BD-Live access is restricted.
17 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Note
• You cannot restrict internet access on commercial
Blu-ray discs.
Note
• To play DivX DRM protected files from a disc or a USB
storage device, connect your home theater to aTV
through an HDMI cable.
USB storage devices
Enjoy pictures, audio and video on a USB
storage device.
VOD code for DivX
Before you purchase DivX videos and play
them on your home theater, register the home
code.
What you need
•
A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
•
A USB extension cable, if the USB storage
device does not fit into the connector.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [DivX® VOD Code],
and then press OK.
Note
» The DivXVOD registration code for
your home theater is displayed.
• You can use digital cameras connected by USB if they
can play the files without using a special computer
program.
• To play DivX DRM - protected files from a USB
storage device, connect your home theater to aTV
through an HDMI cable.
Subtitles
If your video has subtitles in multiple languages,
select a subtitle language.
1 While playing video, press SUBTITLE to
Play files
select a language.
1 Connect the USB storage device to the
home theater.
Note
2 Press (Home).
• Make sure that the subtitle file has the same name as
the video file. For example, if the video file is named
'movie.avi', save the subtitle file as 'movie.srt' or 'movie.
sub'.
• Your home theater can play subtitle files in the
following formats: .srt, .sub, .txt, .ssa, .ass, smi, and .sami.
These files do not appear in the file navigation menu.
• If the subtitles do not appear correctly, change the
character set.
» The home menu is displayed.
3 Select [browse USB], and then press OK.
» A content browser is displayed.
4 Select a file, and then press OK.
(see 'Play buttons' on page 16).
Subtitle character set
DivX
If the subtitles do not appear correctly, change
the character set that supports the DivX
subtitle.
Play DivX videos from :
•
EN 18
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press
OPTIONS.
» The options menu is displayed.
Video options
While watching video, select options such
as subtitles, audio language, time search, and
picture settings. Depending on the video source,
some options are not available.
2 Press the Navigation buttons to select
[Character Set], and then press OK.
3 Select a character set.
Europe, India, and Russia
1 Press
OPTIONS.
» The video options menu is displayed.
Character
Set
Language
2 Press the Navigation buttons and OK to
[Standard] English,Albanian, Danish, Dutch,
Finnish, French, Gaelic, German,
Italian, Kurdish (Latin), Norwegian,
Portuguese, Spanish, Swedish and
Turkish
select and change:
•
•
•
•
•
•
[Audio Language]: Select audio
language for video.
[Subtitle Language]: Select subtitle
language for video.
[Subtitle Shift]: Change the subtitle
position on the screen.
[Info]: Display information about what
is playing.
[Character Set]: Select a character set
that supports the DivX subtitle.
[Time Search]: Skip to a specific part
of the video by entering the time of
the scene.
[Central
Europe]
Albanian, Croat, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene
and Sorbian
[Cyrillic]
[Greek]
Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian and Ukrainian
Greek
•
•
[2nd Audio Language]: Select the
second audio language for Blu-ray
video.
[2nd Subtitle Language]: Select the
second subtitle language for Blu-ray
video.
[Titles]: Select a specific title.
[Chapters]: Select a specific chapter.
[Angle List]: Select a different camera
angle.
Audio, video, and picture
options
Use advanced features when you play audio,
video, or media files from a disc or a USB
storage device.
•
•
•
•
•
[Menus]: Display the disc menu.
[PIP Selection]: Display Picture-in-
Picture window when playing a Blu-ray
disc that supports the BonusView.
[Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
[Repeat]: Repeat a chapter or title.
[Repeat A-B]: Mark two points within a
chapter or track to repeat play, or turn
off the repeat mode.
Audio options
While playing audio, repeat an audio track, a
disc, or a folder.
1 Press
OPTIONS repeatedly to cycle
through the following functions:
•
•
•
•
•
RPTTRACK / RPT FILE: Repeat the
current track or file.
RPT DISC / RPT FOLDER: Repeat all
the tracks on the disc or the folder.
RPT RANDOM: Play audio tracks in
random order.
•
•
•
[Picture Settings]: Select a predefined
color setting.
RPT OFF:Turn off the repeat mode.
19 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Select a music track, and then press OK.
Picture options
2 Press
BACK, and go to the picture
While viewing a picture, zoom into the picture,
rotate it, add animation to a slideshow, and
change the picture settings.
folder.
3 Select a picture, and then press (Play) to
start the slideshow.
1 Press
OPTIONS.
» The picture options menu appears.
4 Press to stop slideshow.
5 Press again to stop music.
2 Press the Navigation buttons and OK to
select and change the following settings:
•
•
•
[Rotate +90]: Rotate the picture 90
degree clockwise.
[Rotate -90]: Rotate the picture 90
degree counter-clockwise.
[Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
[Info]: Display picture information.
[Duration per slide]: Select the display
speed for each picture in a slide show.
[Slide Animation]: Select animation for
the slide show.
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
What you need
•
FM antenna.
•
•
Note
•
•
•
• AM and digital radio are not supported.
• If no stereo signal is detected, you are prompted to
install the radio stations again.
• For the best reception, place the antenna away from
theTV or other sources of radiation.
[Picture Settings]: Select a predefined
color setting.
[Repeat]: Repeat a selected folder.
Slideshows
Tune stations
While playing audio, access fun features such as
picture and musical slideshows.
Picture slideshows
1 Connect the FM antenna as described in
the Quick start guide.
2 Press RADIO.
View a slideshow of your pictures stored in
your disc or a USB storage device.
» If you have already installed the radio
stations, the last channel that you
listened to is played.
1 Select a picture from a disc or USB storage
device, and then press (Play).
» If you have not installed any radio
stations, the message AUTO
2 Press
OPTIONS.
3 Press Navigation buttons and OK to
INSTALL...PRESS PLAY appears on
the display panel. Press (Play).
select the following settings:
•
[Slide Animation]: Select an animation
for the slideshow.
3 Press the following buttons to listen or to
change radio stations:
•
[Duration per slide]: Select a display
speed for each picture in a slideshow.
4 Press to stop the slideshow.
Musical slideshows
Create a musical slideshow to play music and
pictures at the same time.
EN 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Action
Play music
/
Select a preset radio station.
1 Connect the MP3 player to the home
theater as described in the Quick start
guide.
or
Alphanumeric
buttons
Navigation
buttons (left/
right)
Navigation
buttons (up/
down)
Search for a radio station.
Fine tune a radio frequency.
2 Press AUDIO SOURCE repeatedly until
'MUSIC I-LINK' appears on the display
panel.
3 Press the buttons on the MP3 player to
select and play audio files or music.
Press to stop the installation
of radio stations.
Press and hold to erase the
preset radio station.
Manual:
EasyLink
BACK
The home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI can be controlled by a single remote
control.
OPTIONS
1) Press
2) Press
OPTIONS.
/
to select
your preset. 3) Press
OPTIONS again to store the
radio station.
Philips does not guarantee 100%
Automatic: Press and hold
for three seconds to reinstall
the radio stations.
interoperability with all HDMI-CEC devices.
What you need
•
•
HDMI-CEC compliant devices.
An HDMI connection between the
connected devices.
Listen to radio
1 Press RADIO.
Switch on
•
To listen to a preset station, press
1 On theTV and other connected devices,
turn on the HDMI-CEC operations. For
details, see the manual of theTV or other
devices.
or
.
•
To search for a radio station, and then
listen, press Navigation buttons (left/
right).
2 Press (Home).
2 Press +/- (Volume) to change the volume.
3 Select [Setup], and then press OK.
4 Select [EasyLink] > [EasyLink], and then
MP3 player
press OK.
5 Select [On], and then press OK.
Connect your MP3 player to play your audio
files or music.
Control devices
What you need
Control the home theater and the other
connected HDMI-CEC compliant devices with
a single remote control.
•
•
An MP3 player.
A 3.5mm stereo audio cable.
21 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Follow the instructions on theTV to map
the audio of the connected device to the
audio inputs on your home theater.
One-touch play
If you enable One-touch play, theTV
automatically switches to the correct channel
when you play a disc in your home theater.
One-touch standby
Note
When you press and hold (Standby) on the
remote control, the home theater and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby
mode.
• If you connect your home theater to theTV through an
HDMI ARC connection, make sure that theTV audio is
mapped to the ARC input on your home theater.
If one-touch standby is enabled on your home
theater, you can switch to standby with the
remote control of theTV or other HDMI-
CEC devices.
System Audio Control
When you play a device that has its audio
output routed to the home theater, the home
theater switches to the corresponding audio
source automatically.
To use one-touch audio, turn on System Audio
Control and follow the instructions on theTV
to map connected devices to the audio input
connectors of the home theater.
Audio Input Mapping
input connector (see 'Play audio from home
Play audio from home theater
Play the audio from a connected device through
your home theater.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [EasyLink] > [System Audio
Control] > [On], and then press OK.
•
To play the audio from theTV
speakers, select [Off], and skip the
following steps.
4 Select [EasyLink] > [Audio Input
Mapping], and then press OK.
EN 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture color
6 Change settings
Deep Color recreates the natural world on
yourTV screen and displays vivid images in over
a billion of colors.
If yourTV supports Deep Color and is
connected to your home theater through an
HDMI cable, you can change the Deep Color.
This section helps you to change the settings of
your home theater.
Caution
1 Press (Home).
• Most of the settings are already configured with the
best value for your home theater. Unless you have a
reason to change a setting, it is best to leave it at the
default value.
2 Select [Setup], and then press OK.
3 Select [Video] > [HDMI Deep Color],
and then press OK.
4 Select the following options, and then press
Note
OK:
•
[Auto]:Automatically select HDMI
Deep Color.
[On]:View vivid images.
• You cannot change a setting that is grayed out.
• To return to the previous menu, press
BACK. To
exit the menu, press
(Home).
•
•
[Off]: Display standard 24-bit color.
Picture resolution
Picture
For HDMI video settings, connect your home
theater to theTV through an HDMI cable.
Change the picture settings to suit your
preferences.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Video] > [HDMIVideo], and then
Note
press OK.
• The best setting is automatically selected for theTV. If
you change the setting, make sure that theTV supports
the new settings.
4 Change the HDMI resolution setting, and
then press OK.
Subtitle position
Picture settings and format
Automatically change the position of the
subtitles to fit yourTV screen.
1 Press (Home).
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Video], and then press OK.
2 Select [Setup], and then press OK.
3 Select [Preference] > [Auto Subtitle Shift]
4 Change the following settings, and then
> [On], and then press OK.
press OK:
•
•
[TV Display]: Picture format.
[Picture Settings]: Predefined color
settings.
Sound
Change the sound settings to suit your
preference.
23 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI audio
Restore sound mode settings
To hear an HDMI audio output from yourTV,
connect your home theater to theTV through
an HDMI cable.
Restore the equalizer settings of all the sound
modes to the default values.
1 Press (Home).
1 Press (Home).
2 Select [Setup], and then press OK.
2 Select [Setup], and then press OK.
3 Select [Audio] > [Default sound settings],
3 Select [Audio] > [HDMI Audio], and then
and then press OK.
press OK.
4 Select the following options, and then press
OK:
Language
•
•
•
[Bitstream]: Enable bitstream output
over HDMI.
[Auto]:Automatically select the best
supported audio format.
Select a language for the home menu, audio,
and subtitles.
[Off]: Disable audio from theTV.
Home menu
1 Press (Home).
Audio post processing
2 Select [Setup], and then press OK.
3 Select [Preference] > [Menu language],
and then press OK.
4 Select a menu language, and then press
1 Press (Home).
OK.
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Enhanced Audio] >
Disc audio
[On], and then press OK.
1 Press (Home).
Note
2 Select [Setup], and then press OK.
• To play the original audio of the disc, select [Off].
3 Select [Preference] > [Audio], and then
press OK.
4 Select an audio language for discs, and then
press OK.
Night mode
For quiet listening, decrease the volume of loud
sounds when you play discs. Night mode is only
available for Dolby-encoded DVD and Blu-ray
discs.
Note
• If your preferred disc language is not available, select
[Others] from the list, and enter the 4-digit language
code found at the end of this user manual.
• If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Audio] > [Night Mode] > [On],
and then press OK.
EN 24
Download from Www.Somanuals.com. All Manuals Search And Download.
•
If you do not have a password or you
have forgotten, enter 0000.
Disc subtitle
5 Press OK.
1 Press (Home).
2 Select [Setup], and then press OK.
Ratings
3 Select [Preference] > [Subtitle], and then
press OK.
Some discs are recorded with ratings according
to age.You can set up your home theater to
play only discs with an age rating lower than
your child’s age.
4 Select a subtitle language for discs, and
then press OK.
1 Press (Home).
Disc menu
2 Select [Setup], and then press OK.
1 Press (Home).
3 Select [Preference] > [Parental Control],
2 Select [Setup], and then press OK.
and then press OK.
3 Select [Preference] > [Disc Menu], and
» A message prompts you to enter the
password.
then press OK.
4 Select a menu language for discs, and then
4 Enter the password with the Numeric
press OK.
buttons.
5 Select an age rating, and then press OK.
Note
•
To play all discs irrespective of the
rating, select level 8 or [Off].
• If your preferred disc language is not available, select
[Others] from the list, and enter the 4-digit language
code found at the the end of this user manual.
• If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
Energy saving
Save energy by changing the following settings.
Auto standby
Parental control
When playing a disc or a USB storage device,
automatically switch your home theater to
standby if:
Restrict access to discs that are recorded with
ratings.
•
•
it is in pause or stop mode, and
no button is pressed for 30 minutes.
Password
1 Press (Home).
You can set or change your password to play a
restricted disc.
2 Select [Setup], and then press OK.
3 Select [Preference] > [Auto Standby] >
1 Press (Home).
[On], and then press OK.
2 Select [Setup], and then press OK.
3 Select [Preference] > [Change Password],
Sleep timer
and then press OK.
» A change password menu is displayed.
Set timers to switch the home theater to
standby after a specified time.
4 Follow the instructions on theTV to set or
change password.
1 Press (Home).
25 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Select [Setup], and then press OK.
3 Select [Preference] > [SleepTimer], and
then press OK.
4 Select the duration of the sleep timer.
» The sleep timer can be set up to 60
minutes. If the sleep timer is set to
[Off], it switches off.
5 Press OK to activate.
» The home theater switches to standby
after the specified time.
Screen saver
Automatically switch your home theater to
screen saver mode if:
•
•
it is in pause or stop mode, and
no button is pressed for 10 minutes.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Screen Saver] >
[On], and then press OK.
Display panel
Change the brightness of the home theater
display panel.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Display Panel], and
then press OK.
4 Select the brightness, and then press OK.
Apply factory settings
Reset your home theater to the default settings.
You cannot reset the parental control settings.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Restore default
settings], and then press OK.
4 Select [OK], and then press OK.
EN 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
7 Update software
• If the home theater cannot connect to the Philips
server, press
(Home).
• Select [Setup] > [Network] > [Network Installation]
to set up the network.
To continue to get the best features and
support for your home theater, update the
software regularly. Compare the version of your
current software with the latest version on
Update software through
USB
Check software version
What you need
1 Press (Home).
•
A USB flash drive, with at least 75MB of
memory.The USB flash drive must be FAT
or NTFS formatted. Do not use a USB
hard drive.
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Version Info.], and
then press OK.
•
•
A computer with Internet access.
An archive utility that supports the ZIP
file format (for example,WinZip® for
Microsoft® Windows® or Stufflt® for
Macintosh®).
» The software version is displayed.
Update software through the
Internet
Step 1: Download the latest software
1 Connect your home theater to the
'Set up the wired network' on page 13).
1 Connect a USB flash drive to your
computer.
2 Press (Home).
com/support.
3 Select [Setup], and then press OK.
3 At the Philips Support website, find your
product and locate the Software and
drivers.
4 Select [Advanced] > [Software Update] >
[Network].
» If an upgrade media is detected, you
are prompted to start or cancel the
update.
» The software update is available as a
zip file.
4 Save the zip file in the root directory of
5 Follow the instruction on theTV to
confirm the update.
your USB flash drive.
5 Use the archive utility to extract the
software update file in the root directory
of the USB flash drive.
» When the software update is
complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.
» The files are extracted under the
UPG_ALL folder of your USB flash
drive.
6 Disconnect the USB flash drive from your
computer.
27 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Update the software
Caution
• Before you connect the USB flash drive to your home
theater, make sure that there is no disc in the disc
compartment, and the disc compartment is closed.
1 Connect the USB flash drive to your home
theater.
2 Switch yourTV to the correct source for
your home theater.
3 Press (Home), and then select [Setup].
4 Select [Advanced] > [Software Update]
> [USB].
5 Follow the instructions on theTV to
confirm the update.
» When the software update is
complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds, and then
reconnect it.
Note
• When the software update is in progress, do not turn
off the power or remove the USB flash drive.
EN 28
Download from Www.Somanuals.com. All Manuals Search And Download.
File formats
8 Product
specifications
•
•
Audio: .aac, .mka, .mp3, .wma, .wav
Video: .avi, .divx, .mp4, .mkv, .asf, .mpg,
.mpeg
•
Picture: .jpg, .jpeg, .gif, .png
Note
Audio formats
• Specifications and design are subject to change without
notice.
Your home theater supports the following
audio files.
Extension Container Audio
codec
Bit rate
Region codes
.mp3
.wma
.aac
MP3
MP3
32 kbps ~
320 kbps
64 kbps ~
160 kbps
The type plate on the back or bottom of the
home theater shows which regions it supports.
ASF
WMA
Country
Europe,
DVD
BD
AAC
AAC, HE- 192 kbps
AAC
United Kingdom
.wav
.m4a
.mka
WAV
MKV
MKA
PCM
AAC
PCM
1.4 Mbps
192 kbps
27.648
Mbps
640 kbps
Asia Pacific, Taiwan,
Korea
A
Latin America
.mka
MKA
Dolby
Digital
A
.mka
.mka
.mka
MKA
MKA
MKA
DTS core 1.54 Mbps
Australia,
New Zealand
MPEG
MP3
912 kbps
32 kbps ~
320 kbps
64 kbps ~
160 kbps
192 kbps
Russia, India
C
C
.mka
.mka
MKA
MKA
WMA
China
AAC,
HE-
AAC
Media formats
•
AVCHD, BD, BD-R/ BD-RE, BD-Video,
Video formats
DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL, CD-R/CD-RW,Audio CD,
Video CD/SVCD, Picture files, MP3 media,
WMA media, DivX Plus HD media, USB
storage device
If you have a high definitionTV, your home
theater allows you to play your video files with:
•
•
Resolution: 1920 x 1080 pixels at
Frame rate: 6 ~ 30 frames per second.
29 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
.avi files in AVI container
.mkv files in MKV container
Audio
codec
Video codec
Bit rate
Audio codec
Video codec
Bit rate
PCM, Dolby
Digital, DTS
core, MPEG,
MP3,WMA,
AAC, HE-
AAC
MPEG 1,
MPEG 2
20 Mbps
(peak 40
Mbps)
PCM,
Dolby
Digital,
DTS
DivX 3.11,
DivX 4.x, DivX 5.x,
DivX 6.x
10 Mbps max
core,
MP3,
WMA
MPEG 4 ASP
10 Mbps
max
MPEG 1, MPEG 2
20 Mbps
(peak 40
Mbps)
H.264/AVC
[email protected]/4.0;
[email protected]/3.1/3.0
20 Mbps
(peak 40
Mbps)
MPEG 4 ASP
H.264/AVC
[email protected]/4.0;
[email protected]/3.1/3.0
10 Mbps max
20 Mbps
(peak 40
Mbps)
Amplifier
•
Total output power: 300W RMS (30%
THD)
.divx files in AVI container
•
•
•
Frequency response: 20 Hz-20 kHz /
±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Audio
codec
Video codec
Bit rate
PCM,
Dolby
Digital,
MP3,
DivX 3.11,
DivX 4.x,
DivX 5.x, DivX 6.x
10 Mbps max
•
Input sensitivity:
•
•
AUX: 2V
Music iLink: 1V
WMA
MPEG 1, MPEG 2
20 Mbps
(peak 40
Mbps)
Video
•
•
Signal system: PAL / NTSC
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p24
MPEG 4 ASP
10 Mbps max
.mp4 or .m4v files in MP4 container
Audio
Audio
codec
Video codec
Bit rate
•
•
•
S/PDIF Digital audio input:
•
•
Sampling frequency:
•
•
Dolby
Digital,
MPEG,
MP3,AAC,
HE-AAC
MPEG 1,
MPEG 2
20 Mbps (peak
40 Mbps)
Coaxial: IEC 60958-3
Optical:TOSLINK
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
Constant bit rate:
MPEG 4 ASP
H.264/AVC
[email protected]/4.0;
[email protected]/3.1/3.0
10 Mbps max
20 Mbps (peak
40 Mbps)
•
•
MP3: 32 kbps - 320 kbps
WMA: 48 kbps - 192 kbps
EN 30
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Dimensions (WxHxD): 159 x 84.5 x 80
mm
Weight: 0.35 kg
Radio
•
Tuning range:
•
Europe/Russia/China: FM 87.5-108
MHz (50 kHz)
Asia Pacific/Latin America: FM 87.5-108
MHz (50/100 kHz)
Front/Rear speaker:
•
•
•
•
Output power: 4 x 50 W RMS (30%THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") woofer
Dimensions (WxHxD): 84.5 x 159 x 80
mm
•
•
•
Signal-to-noise ratio: FM 50 dB
Frequency response: FM 200 Hz-12.5 kHz
/ ±6 dB
•
Weight: 0.35 kg/each
USB
Remote control batteries
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
•
2 x AAA-R03-1.5V
Laser
•
•
File system: FAT16, FAT32, NTFS
Maximum memory support: < 160 GB
•
LaserType (Diode): InGaN/AIGaN (BD),
AIGaInP (DVD/CD)
Main unit
•
Wave length: 405 +7 nm/-7 nm (BD), 655
+10 nm/-10 nm (DVD), 790 +10 nm/-20
nm (CD)
Output power (Max. ratings): 20 mW
(BD), 6 mW (DVD), 7 mW (CD)
•
Power supply:
•
Europe/China/Russia/India: 220-240
V~, 50 Hz
•
•
Latin America/Asia Pacific: 110-240V~,
50-60 Hz
•
•
•
Power consumption: 60 W
Standby power consumption: ≤ 0.9 W
Dimensions (WxHxD): 360 x 58 x 325
mm
•
Weight: 2.4 kg
Subwoofer
•
•
•
•
Output power: 50 W RMS (30%THD)
Impedance: 4 ohm
Speaker drivers: 133 mm (5.25") woofer
Dimensions (WxHxD): 160 x 265 x 265
mm
•
Weight: 2.50 kg
Speakers
Center speaker:
•
•
•
Output power: 50 W RMS (30%THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") woofer
31 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Use an HDMI cable to connect to theTV.
9 Troubleshooting
Sound
No sound from home theater speakers.
Warning
•
Connect the audio cable from your home
theater to yourTV or other devices.
You do not need a separate audio
connection when the home theater and
TV are connected through an HDMI ARC
connection.
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
•
•
(see 'Set up audio for connected devices'
settings (see 'Apply factory settings' on
page 26), then switch it off and switch on
again.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Main unit
•
On your home theater, press SOURCE
repeatedly to select the correct audio
input.
The buttons on the home theater do not
work.
•
Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Distorted sound or echo.
•
If you play audio from theTV through the
home theater, make sure that theTV is
muted.
Picture
Audio and video are not synchronized.
•
1) Press SOUND SETTINGS. 2) Press
the Navigation buttons (left/right) to
select AUD SYNC, and then press OK. 3)
Press the Navigation buttons (up/down)
to synchronize the audio with the video.
No picture.
•
Make sure that theTV is switched to the
correct source for the home theater.
No picture on aTV connected through HDMI.
•
•
•
Make sure that the HDMI cable is not
faulty. If it is faulty, replace it with a new
cable.
Press (Home) and then 731 on the
remote control to restore the default
picture resolution.
Play
Cannot play a disc.
•
•
Clean the disc.
the type of disc (see 'Media formats' on
•
•
If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalized.
Disc does not play high-definition video.
•
Make sure that the disc contains high-
definition video.
•
Make sure that theTV supports high-
definition video.
EN 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot play a DivX file.
TV screen is black when you play a Blu-ray
video or a DivX copy protected video.
•
Make sure that the DivX file is encoded
according to the 'HomeTheater Profile'
with the DivX encoder.
•
Make sure that the home theater is
connected to theTV through an HDMI
cable.
•
Make sure that the DivX file is complete.
•
Switch to the correct HDMI source on
theTV.
DivX subtitles do not display correctly.
•
•
Select the correct character set: 1) Press
OPTIONS. 2) Select [Character Set].
3) Select the supported character set. 4)
Press OK.
Cannot read the contents of a USB storage
device.
•
Make sure that the format of the USB
storage device is compatible with the
home theater.
•
Make sure that the file system on the USB
storage device is supported by the home
theater.
'No entry' or 'x' sign appears on theTV.
The operation is not possible.
•
EasyLink does not work.
•
When you switch on theTV, the home theater
automatically switches on.
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC).To make the
home theater work independently, switch
off EasyLink.
Cannot access BD-Live features.
•
wired network' on page 13).
•
•
•
'Set up the wired network' on page 13).
Make sure that the Blu-ray disc supports
BD-Live features.
memory' on page 17).
33 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
character set
close disc compartment
compliance
10 Index
computer
connect to
connect
A
advanced
audio (analog cable)
audio (coaxial cable - digital)
audio (optical cable - digital)
audio fromTV and other devices
home network
speakers
TV (Composite)
TV (HDMI ARC)
TV (HDMI)
BD-Live security
enhanced audio
restore default settings
software update
software version
amplifier
audio
HDMI audio
night mode
post processing
predefined modes
quality
settings
source
speaker setup
specifications
audio formats
audio input mapping
audio language
audio options
auto standby
connectors
back connectors
front connectors
control
disc play
Easylink (HDMI-CEC)
main unit
parental control
radio
copyright protection
D
disable
audio post processing
BD-Live
HDMI-CEC
discs
audio
audio language
BD-Live
BonusView
control buttons
DivX
menu language
options
picture
picture-in-picture
play
B
bass
BD-Live
BD-Live (USB)
clear memory
disable
Blu-ray
BonusView
brightness
browse
disc
USB storage device
C
care
subtitle
environment
product
synchronize picture and sound
time search
EN 34
Download from Www.Somanuals.com. All Manuals Search And Download.
titles
display panel
DivX
BD-Live
connect to
update software
character set
subtitles
VOD code
L
language
2nd audio language
2nd subtitle language
audio
disc menu
onscreen menu
subtitle
E
EasyLink (HDMI-CEC)
audio input mapping
control buttons
one-touch play
one-touch standby
system audio control
eject disc
legal notices
M
enable
main unit
auto standby
auto subtitle shift
BD-Live
HDMI-CEC
predefined sound mode
screen saver
energy
auto standby
brightness
screen saver
sleep timer
overview
specifications
troubleshooting
manually setup speakers
media formats
MP3
connector
play
multimedia content
from disc
from USB storage device
F
N
factory settings
FM antenna
FM antenna
front connectors
network
home network
settings
update software
wired connection
night mode
H
HDMI
audio
O
Deep color
TV (HDMI ARC)
video
one-touch play
one-touch standby
open disc compartment
open source software
options
HDMI-CEC
I
audio
picture
Internet
35 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
video
overview
connectors
HDMI-CEC
main unit
remote control
settings
speaker setup
audio
auto standby
auto subtitle shift
change password
disc menu
display panel
menu language
parental control
screen saver
sleep timer
P
subtitle
product specifications
parental control
password
ratings
password
PC
R
radio
connect to
Philips Easylink
picture
options
rotate
control buttons
FM antenna
listen to radio
specifications
tune stations
ratings
settings
slideshows
troubleshooting
zoom
picture options
picture-in-picture
2nd audio language
2nd subtitle language
play
discs
DivX
MP3
radio
slideshows
troubleshooting
USB
position
connectors
position
recycling
region codes
remote control
batteries
overview
repeat
S
safety
disposal
use of the product
screen saver
settings
audio
auto standby
auto subtitle shift
default
disc language
HDMI audio
HDMI video
HDMI-CEC
menu language
parental rating
password
subtitle
power options
auto standby
brightness
screen saver
sleep timer
preference
picture
EN 36
Download from Www.Somanuals.com. All Manuals Search And Download.
power
resolution
restore
titles
trademarks
treble
troubleshooting
connection
main unit
picture
screen saver
sleep timer
subtitle language
video
setup speakers
manually
sleep timer
slideshows
animation
duration
musical
picture
software
play
sound
U
update software
check current version
from a USB storage device
from network
USB
check current version
update
sound
format
USB storage device
options
bass
play
default sound mode
equalizer
predefined sound mode
surround sound
synchronize picture and sound
treble
troubleshooting
speakers
connect
manual setup
position
setup
specifications
surround sound
specifications
subtitle
specifications
update software
V
video
HDMI deep color
picture resolution
picture settings
synchronize picture and sound
VOD code for DivX
video formats
video options
VOD code for DivX
W
character set
language
position
wired network
settings
wired connection
subwoofer
specifications
synchronize picture and sound
system audio control
T
time search
37 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja 7889
9072
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
Chuang; Zhuang
Church Slavic; Slavonic 6785
9065
Chuvash
Corsican
Česky
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
HTS3541_12_UM_V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|