Register your product and get support at
HTS3269
HTS3270
HTS3277
HTS3376
HTS3377
HTS3376W
HTS3377W
EN User manual
DE Benutzerhandbuch
ES Manual del usuario
FR Mode d’emploi
NL Gebruiksaanwijzing
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Adjust sound
31
31
31
31
Contents
Control the volume
Select surround sound
Select a preset sound
1
2
3
Important
Safety and important notice
Trademark notice
4
4
5
Adjust settings
General setup
Audio setup
Video setup
32
32
34
35
36
Your product
Feature highlights
Product overview
7
7
8
Preferences
9
Additional Information
Update software
Care
39
39
39
Connect
Place the product
10
10
11
12
12
13
Connect video cables
Connect speaker cables to speakers
Connect speaker to speaker stand
Connect speakers and subwoofer
Connect rear speakers to wireless
receiver
Connect radio antenna
Connect audio cables/other devices
Connect power cord
10 Specifications
11 Troubleshooting
12 Glossary
40
42
44
14
14
14
16
4
5
Get started
17
17
17
18
18
19
21
Insert the remote control batteries
Find the correct viewing channel
Select menu display language
Change speaker settings
Use Philips EasyLink
Select a play source
Play
Play a disc
Play video
Play music
22
22
22
25
26
27
28
28
Play photo
Play from USB device
Play from portable media player
Play from radio
6
Advanced features
Create MP3 audio files
30
30
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
1 Important
Safety and important notice
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Warning
• Risk of overheating! Never install the product
in a confined space. Always leave a space
of at least 4 inches around the product for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on the
product.
• Never place the product, remote control or
batteries near naked flames or other heat
sources, including direct sunlight.
• Only use this product indoors. Keep this
product away from water, moisture and liquid-
filled objects.
• Never place this product on other electrical
equipment.
• Keep away from this product during lightning
storms.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Copyright in the U.K.
Recording and playback of material may
require consent. See Copyright Act 1956 and
The Performers’ Protection Acts 1958 to
1972.
• Visible and invisible laser radiation when open.
Avoid exposure to beam.
Mains fuse (UK only)
This product is fitted with an approved
moulded plug. Should it become necessary to
replace the mains fuse, this must be replaced
with a fuse of the same value as indicated on
the plug (example 10A).
This product is in compliance with the
essential requirements and other relevant
provisions of Directives 2006/95/EC (Low
Voltage), 2004/108/EC (EMC).
1
2
Remove fuse cover and fuse.
The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
Hereby, Philips Consumer Lifestyle, declares
that this Home Theatre System HTS3377W,
HTS3376W (CE 0560) is in compliance with
the essential requirements and other relevant
provisions of Directive 1999/5/EC.
3
Refit the fuse cover.
Note
• To conform to the EMC directive (2004/108/
EC), the mains plug on this product must not
be detached from the mains cord.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of your old product and
batteries
Trademark notice
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby
Laboratories.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
DivX, DivX Ultra Certified, and associated
logos are trademarks of DivX, Inc. and are
used under license.
Official DivX® Ultra Certified product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media files and the DivX® Media Format.
Plays DivX® video with menus, subtitles and
audio tracks.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Manufactured under licence under U.S. Patent
#s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of
DTS, Inc. © 1996-2008 DTS, Inc. All Rights
Reserved.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. trademarks.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LASER RADIATION
DO NOTVIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
Note
• This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
•
•
•
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced
radio/TV technician for help.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
High speed USB 2.0 Link and MP3 link
Simply plug your USB device into the USB jack
to play your MP3/WMA/JPEG/DivX files; or
plug your portable media player to the MP3
LINK jack to enjoy the music play in superb
sound quality.
2 Your product
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers; register your product
Sync the audio output with the video play
Synchronise audio and video by delaying the
audio output if the video signal sent to the TV
is slower than the audio streams.
Feature highlights
Video upscaling to 1080p
Create MP3 files
Enjoy watching discs in the highest picture
quality available for your HDTV. This product
offers full high-definition video playback up
to 1080p resolution that provides a highly
detailed picture and increased sharpness that
delivers a more true-to-life picture for an
amazing viewing experience.
Convert your favourite audio tracks from an
audio CD into MP3 format. The created MP3
files are saved in your USB device.
Screen Fit
View the movie in full screen display on any
TV.
Philips EasyLink
Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Region codes
You can play discs with the following region
codes.
Note
DVD region code
Countries
Europe
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
Russia
Listen to rich uncompressed multi-channel
surround sound
This Home Theatre System supports 5.1
channels of uncompressed audio that delivers
a real-to-life sound experience as if you are
listening to it live.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
j
MP3 LINK
Product overview
•
Connects a portable audio player
k
(USB)
Main unit
•
Connects a USB supported device.
Remote control
a
b
a
b c d e f g h i j k
c
d
o
p
a
(Standby-On)
Turns on the Home Theatre System
or switches to standby mode.
•
e
b
c
Disc compartment
f
g
q
r
s
(Open/Close)
•
Opens or closes the disc
compartment.
h
i
d
e
(Play/Pause)
t
u
j
•
•
Starts, pauses or resumes play.
In radio mode, automatically tune
radio stations during first-time setup.
k
(Stop)
l
m
v
w
x
•
•
Stops play.
In radio mode, erases the current
preset radio station.
n
f
SOURCE
Selects a media to play or listen to
audio from the connected device.
•
g
h
Display panel
Displays the current status or the
disc information.
a
(Standby-On)
Turns on the Home Theatre System
or switches to standby mode.
When EasyLink is enabled, press
and hold for at least three seconds
to turn all connected HDMI CEC-
compliant devices to standby.
•
•
•
IR sensor
Detects signals from the remote
•
control. Point the remote control at
the IR sensor.
i
VOL
Increases or decreases volume.
b
(Open/Close)
•
•
Opens or closes the disc
compartment.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
c
SLEEP
n
o
CREATE MP3/ZOOM
•
Sets a delay after which the Home
Theatre System switches to standby.
•
•
Accesses the menu to create MP3.
Zooms in or out of the picture.
d
e
SETUP
Source buttons
•
Accesses or exits the setup menu.
•
AUDIO SOURCE: Selects an audio
input source.
(Navigation buttons)
•
•
•
RADIO: Switches to FM radio.
USB: Switches to the USB source.
DISC: Switches to the disc source.
•
•
Navigates through the menus.
Press left and right for fast backward
or forward search.
•
•
In radio mode, press up and down to
tune the radio frequency.
In radio mode, press left or right to
start auto search.
p
q
OK
•
Confirms an entry or selection.
BACK
•
•
•
Returns to a previous screen.
For DVD, goes to the title menu.
For VCD version 2.0 or SVCD with
PBC turned on, returns to the menu
during playback.
f
INFO
•
•
For discs, displays information about
the current status or the disc.
For slideshows, displays a thumbnail
view of photo files.
r
/
(Previous/Next)
g
h
(Play/Pause)
•
•
Skips to the previous or next title,
chapter or track.
•
•
Starts, pauses or resumes play.
In radio mode, automatically tune
radio stations during first-time setup.
s
t
(Mute)
Mutes or restores audio output.
(Stop)
Stops play.
In radio mode, erases the current
preset radio station.
VOL +/-
•
•
•
Increases or decreases volume.
u
v
SOUND
•
Selects a predefined sound effect.
i
j
SURR (Surround Sound)
•
Switches to supported surround
sound or stereo sound.
ANGLE
•
Displays video from different camera
angles.
AUDIO SYNC
•
•
Selects an audio language or channel.
w
REPEAT/PROGRAM
Press and hold to access the setting
for audio sync, then press VOL +/- to
set the audio delay time.
•
Selects or turns off repeat or shuffle
mode.
•
In radio mode, resets the list of
preset stations: press to manually
reset; press and hold to automatically
reset.
k
l
Numeric buttons
•
Selects an item to play.
SUBTITLE
x
REPEAT A-B
Marks the section for repeat play or
turns off repeat mode.
•
•
Selects a subtitle language for video.
•
m
SCREEN FIT
Fits the picture format to the TV
screen.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect
Place the product
•
Place the product where it cannot be
pushed, pulled over or knocked down.
Do not place it in an enclosed cabinet.
Make sure that you have full access to the
power cord for easy disconnection of the
product from the power supply.
Make the following connections to use your
Home Theatre System.
•
Basic connections:
•
•
•
Video
Speakers and subwoofer
Wireless receiver (For HTS3377W,
HTS3376W only)
Power
FRONT
LEFT
REAR
LEFT
•
CENTER
Optional connections:
FRONT
RIGHT
•
•
Radio antenna
Audio
REAR
RIGHT
•
•
Audio from TV
Audio from cable box/recorder/
game console
SUBWOOFER
•
Other devices
•
•
Portable media player
USB device
Wireless receiver is for HTS3377W,
HTS3376W only.
Note
1
2
Place this Home Theatre System near to
the TV.
• Refer to the type plate at the back or bottom
of the product for identification and supply
ratings.
• Before you make or change any connections,
ensure that all devices are disconnected from
the socket.
Place the speakers system at normal
listening ear-level and directly parallel to
the listening area.
3
4
Place the subwoofer at the corner of the
room or at least three feet away from the
TV.
Tip
• Different types of connectors can be used to
connect this product, depending on availability
and your needs. A comprehensive interactive
guide to help you connect your product is
com.
Place the wireless receiver (for
HTS3377W, HTS3376W only) near to
the AC socket and in between the rear
speakers. Position the wireless receiver
(with Philips logo) directly parallel to the
Home Theatre System.
Tip
• To avoid magnetic interference or unwanted
noise, never place this Home Theatre System
too close to any radiation devices.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: Connect to the HDMI jack
Connect video cables
Connect this Home Theatre System to aTV to
view disc play. Select the best video connection
that the TV can support.
•
•
Option 1: Connect to the SCART jack
Option 2: Connect to the HDMI jack (for
a HDMI, DVI or HDCP-compliant TV).
Option 3: Connect to the video (CVBS)
jack (for a standard TV).
HDMI OUT
•
HDMI IN
Note
• You must connect this Home Theatre System
directly to a TV.
1
Connect a HDMI cable (not supplied)
to the HDMI OUT jack on this Home
Theatre System and the HDMI input jack
on the TV.
Option 1: Connect to the SCART jack
Note
• If your device supports HDMI CEC, you can
control compliant devices with a single remote
control. (see ‘Get started’ > ‘Use Philips
EasyLink’).
SCART TO TV
Tip
• If the TV has a DVI connection only, connect
via a HDMI/DVI adaptor. Connect an audio
cable for sound output.
SCART
• You can optimise the video output. (see
‘Adjust settings’ > ‘Video setup’ > [HDMI
Setup]).
• This type of connection provides the best
picture quality.
1
Connect a scart cable to the SCART TO
TV jack on this Home Theatre System
and the SCART input jack on the TV.
Note
• Scart connection allows TV’s audio output
through the speakers. Press AUDIO SOURCE
repeatedly until ‘SCART IN’ is displayed on the
display panel.
• This type of connection provides good picture
quality.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 3: Connect to the Video
(CVBS) jack
Connect speaker cables to
speakers
For the rear speakers of HTS3277, HTS3377,
HTS3376 and HTS3377W, HTS3376W only
VIDEO
VIDEO OUT
VIDEO IN
1
Connect the speaker cables to the
matching colour jacks on the speakers (or
speaker stands).
1
Connect a composite video cable (not
supplied) to the VIDEO jack on this
Home Theatre System and the VIDEO
input jack on the TV.
Connect speaker to speaker
stand
Note
• The video input jack on the TV might be
labelled as A/V IN, VIDEO IN, COMPOSITE
or BASEBAND.
• This type of connection provides standard
picture quality.
For the rear speakers of HTS3277, HTS3377,
HTS3376 and HTS3377W, HTS3376W only
1
Attach the speakers to the speaker stands
and secure the position with screws.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For HTS3377, HTS3376 and HTS3277.
Different set of speakers for HTS3270,
HTS3269 (see ‘Specifications’ > ‘Speakers’).
Connect speakers and
subwoofer
For HTS3377W, HTS3376W only
1
Connect the speakers and subwoofer to
the matching jacks on this Home Theatre
System.
Note
• Ensure that the colours of the plugs and jacks
are matched.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Connect rear speakers to
wireless receiver
• For better FM stereo reception, connect to an
external FM antenna.
For the rear speakers of HTS3377W,
HTS3376W only
Connect audio cables/other
devices
Route the audio from other devices to this
Home Theatre System to enjoy audio play with
multi-channel surround capabilities.
Connect audio to TV
(also used for EasyLink control)
1
Connect the rear left and right speakers
to the matching jacks at the bottom of
the wireless receiver.
AUX
AUDIO IN
Connect radio antenna
AUDIO OUT
1
Connect the audio cables (not supplied)
to the AUDIO IN-AUX jacks on the
Home Theatre System and the AUDIO
output jacks on the TV.
FM (75 Ω)
ANTENNA
Note
1
2
Connect the FM antenna to the FM75
jack on this Home Theatre System
(for some models, this cable is already
connected).
• To listen to the audio output from this
connection, press AUDIO SOURCE
repeatedly until ‘AUX’ is displayed on the
display panel.
Extend the FM antenna and fix its ends to
the wall.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to coaxial jack
Connect audio from a cable box,
recorder or games console
You can choose to connect to analogue
or digital jacks depending on the device
capabilities.
DIGITAL IN
COAXIAL
DIGITAL OUT
1
Connect a coaxial cable (not supplied)
to the DIGITAL-IN-COAXIAL jack
on this Home Theatre System and the
COAXIAL/DIGITAL output jack on the
device.
AUX
AUDIO IN
Note
AUDIO OUT
• To listen to the audio output from this
connection, press AUDIO SOURCE
repeatedly until ‘COAX IN’ is displayed on the
display panel.
1
Connect the audio cables (not supplied)
to the AUDIO IN-AUX jacks on the
Home Theatre System and the AUDIO
output jacks on the device.
Connect to optical jack
Note
• To listen to the audio output from this
connection, press AUDIO SOURCE
repeatedly until ‘AUX’ is displayed on the
display panel.
OPTICAL
DIGITAL IN
OPTICAL
DIGITAL OUT
1
Connect an optical cable (not supplied)
to the DIGITAL-IN-OPTICAL jack
on this Home Theatre System and the
OPTICAL/SPDIF output jack on the
device.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Note
• To listen to the audio output from this
connection, press AUDIO SOURCE
repeatedly until ‘OPTI IN’ is displayed on the
display panel.
• This Home Theatre System can only play/view
MP3, WMA, DivX (Ultra) or JPEG files that are
stored on such devices.
• Press USB to access the content and play the
files.
Connect portable media player
Connect power cord
Warning
MP3
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
1
Connect a 3.5 mm stereo audio cable
(not supplied) to the MP3 LINK jack
on this Home Theatre System and the
phone jack on the portable media player
(such as MP3 player).
1
Connect the power cords from the
Home Theatre System, wireless receiver
and other devices to the power sockets
when all the required connections are
done.
»
The wireless indicator on the wireless
receiver light up. (Only applicable for
HTS3377W, HTS3376W)
Note
• To listen to the audio output from this
connection, press AUDIO SOURCE
repeatedly until ‘MP3 LINK’ is displayed on the
display panel.
»
The product is ready to be set up for
use.
Connect USB device
Note
• For optimum wireless reception, ensure that
the wireless receiver is not obstructed by any
objects.
1
Connect the USB device to
on this Home Theatre System.
USB jack
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigate through the menu
4 Get started
Insert the remote control
batteries
1
2
Point the remote control directly at the
remote sensor on the Home Theatre
System and select the desired function.
Press the following buttons on the
remote control to navigate through the
on-screen menus.
Button
Action
Move up or down
Move left or right
Confirm a selection
Enter numbers
OK
1
2
On the back of the remote control, slide
the battery cover to remove it.
Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
Find the correct viewing
channel
3
Slide the cover back into position.
Note
1
2
3
Press to turn on this product.
• Do not mix batteries (old and new or carbon
and alkaline, etc.).
• Remove batteries if they are exhausted or if
the remote control is not to be used for a long
time.
• Batteries contain chemical substances, they
should be disposed of properly.
Press DISC to switch to disc mode.
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
•
Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
Control a play source
•
Press the
SOURCE button
1
2
Press RADIO, USB or DISC button to
select the source you wish to control.
repeatedly on the remote control of
your TV.
Select the desired function (for example
,
).
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Tip
• The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc. See the
TV user manual on how to select the correct
input on the TV.
• You can set the default language for DVD disc
menu (see ‘Adjust settings’ > ‘Preferences’ >
[Disc Menu]).
Change speaker settings
Select menu display language
Ideally, the distance between listening position
and all the speakers should be the same. If not,
change the speaker settings based on their
distance from the listening position to obtain
the best possible surround sound.
Note
• Skip this setting if this product is connected
to a HDMI CEC compliant TV. It switches
automatically to the same OSD menu language
as per your TV setting.
Audio Setup
Speakers Volume
Speakers Delay
HDMI Audio
General Setup
Auto
EasyLink Setup
Disc Lock
CD Upsampling
Audio Sync
English
Dansk
Display Dim
Nederlands
Suomi
OSD Language
Screen Saver
Français
Deutsch
Italiano
Sleep Timer
DivX(R) VOD Code
1
2
3
Press DISC.
Press SETUP.
Press to select [Audio Setup] in the
menu, then press
1
2
Press DISC.
.
Press SETUP.
»
•
If the speaker setup option is not
accessible, press twice before you
press SETUP.
[General Setup] menu is displayed.
3
4
Press
Press
.
to select [OSD Language] in
the menu, then press
The language options are different
.
To set the speakers level
Select [Speakers Volume] in the menu,
then press
•
1
depending on your country or
region. It may not correspond to the
illustration shown here.
.
5
Press
OK.
to select a language, then press
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakers Volume Setup
Use Philips EasyLink
0dB
0dB
0dB
Front Left
Front Right
Center
Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
0dB
0dB
0dB
Subwoofer
Rear Left
Rear Right
Note
2
Press
then press OK.
to change the volume level,
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
»
The test tone is emitted from the
speaker.
1
2
Turn on the HDMI CEC operations on
the TV and other connected devices. See
TVs/devices manual for details.
•
Repeat the above setting for other
speakers until all the speakers’
output level sounds equally balanced.
To exit the menu, press SETUP.
You can now enjoy the following Philips
EasyLink controls.
•
EasyLink
To set the output delay time (centre and rear
speakers only)
You can turn off or turn on all EasyLink
features.
1
Select [Speakers Delay] in the menu,
then press
One-touch play
.
When you connect your product to devices
that support one-touch play, you can control
your product and the devices with one
remote control. For example, when you
press Play on your DVD remote control, your
TV automatically switches to the correct
channel to show the DVD content.
To enable One-touch play, a video disc must
be placed in the disc compartment before
operation.
Speakers Distance Setup
0MS
0MS
0MS
Center
Rear Left
Rear Right
2
Press
OK.
to set the delay time, then press
One-touch standby
•
Repeat the above setting for other
speakers until the sound output from
different speakers reach the listening
position at the same time.
When you connect your product to devices
that support one-touch standby, you can use
your product remote control to switch your
product and all connected HDMI devices to
standby mode. You can perform one-touch
standby using the remote control from any of
the connected HDMI devices.
•
To exit the menu, press SETUP.
Tip
• Set a longer delay time if the centre speaker or
rear speaker is closer to the listening position
than the front speaker.
• Allow 1 ms setting for every 1 foot distance
between the speaker and the listening position.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
System audio control
5
Select [System Audio Control] > [On],
then press OK to start scanning devices.
When you connect your product to HDMI
CEC-compliant devices, your product can
switch automatically to play audio from the
connected device.
»
Once complete, the audio input
mapping menu is displayed.
To use one-touch audio, you must map the
audio input from the connected device to
your product.
Audio Input Mapping
[TV]
Scart In
[DVD 3400]
other (Non-HDMI)
You can use the remote control from the
connected device to adjust the volume.
Aux
Optical In
Coaxial In
Audio Input Mapping
When you map the audio input correctly, this
Home Theatre System switches to the audio
from the played device automatically.
For example, if the TV audio is
connected to the AUX jack on this
Home Theatre System, select [Aux]
and map with the TV (brand name) at
the right panel.
Map the devices to the audio inputs
Note
• Before you start, ensure that the audio output
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theatre System.
6
7
Select the audio input of this Home
Theatre System that is used to connect to
other HDMI devices (e.g. AUX, SCART
IN), then press
.
Select the correct connected device, then
press OK.
General Setup
»
Repeat steps 5–7 to map other
connected devices.
EasyLink Setup
Disc Lock
EasyLink
One Touch Play
One Touch Standby
System Audio Control
Audio Input Mapping
Display Dim
8
Press SETUP to exit the menu.
OSD Language
Screen Saver
Sleep Timer
DivX(R) VOD Code
1
2
Press DISC.
Press SETUP.
»
[General Setup] menu is displayed.
Press
Select [EasyLink Setup], then press
3
4
.
.
•
[One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a play source
On the main unit
•
Press the SOURCE button repeatedly to
select: DISC > USB > FM > SCART IN
> AUX > COAX IN> OPTI IN > MP3
LINK > DISC ...
On the remote control
•
Press AUDIO SOURCE repeatedly to
switch to the connected audio source:
Display
Device connected to
AUX
AUDIO IN-AUX sockets
SCART TO TV socket
COAXIAL DIGITAL IN
socket
SCART IN
COAX IN
OPTI IN
OPTICAL DIGITAL IN
socket
MP3 LINK
MP3 LINK socket
•
•
•
Press RADIO to switch to FM band.
Press USB to switch to USB mode.
Press DISC to switch to disc mode.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Play
Play video
Note
Play a disc
• For video disc, playback always resumes from
the point where it was last stopped. To start
play from the beginning, press while the
message is displayed.
Caution
• Never place any objects other than discs into
the disc compartment.
• Never touch the disc optical lens inside the
disc compartment.
Control video play
1
2
Play a title.
1
2
Press to open the disc compartment.
Insert a disc with its label facing up.
Use the remote control to control the
title.
•
For a double-sided disc, load the side
to play facing up.
Button
Action
3
Press to close the disc compartment
and start disc play.
Starts, pauses or resumes
playback.
•
To view disc play, turn on the TV to
the correct viewing channel for this
Home Theatre System.
Stops play.
Skips to the next title or chapter.
Skips to the beginning of the
current title or chapter. Press
twice to jump to the previous
title or chapter.
•
To stop disc play, press
.
Note
• Check the types of discs supported. (see
‘Specifications’ > ‘Playback media’).
• If the password entry menu is displayed, enter
the password before you can play the locked
or restricted disc.
• If you pause or stop a disc for about 5 minutes,
the screen saver activates. To deactivate the
screen saver, press DISC.
/
Searches fast-forward (right)
or fast-backward (left). Press
repeatedly to change the search
speed.
•
In pause mode, slow motion
backwards or forwards play.
• After you pause or stop a disc and no buttons
are pressed within 15 minutes, this product
automatically switches to standby mode.
/
Searches slow-forward (down)
or slow-backward (up). Press
repeatedly to change the search
speed.
•
For VCD, only slow-forwards
play is possible.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Change video play
Access DVD menu
1
2
Play a title.
Use the remote control to change the
video play.
Button
Action
AUDIO
SYNC
Selects an audio language or
channel.
SUBTITLE Selects a subtitle language for
1
2
Press DISC to access disc main menu.
video.
Select a play option, then press OK.
REPEAT
Selects or turns off repeat or
•
In some menus, press the Numeric
buttons to input your selection.
To return to the title menu during
shuffle mode.
•
Repeat options vary
•
depending on the disc type.
For VCDs, repeat play is
only possible if the PBC
mode is turned off.
play, press
BACK.
•
AccessVCD menu or preview menu
ZOOM
INFO
Zooms in or out of the picture.
The PBC (Playback Control) for VCD is
activated by default in the factory. When you
load a VCD, the contents menu is displayed.
•
To pan through the zoomed
image, press the Navigation
buttons.
1
Press
to select a play option, then
Displays the current status or
the disc information.
press OK to start play.
•
•
If PBC is off, it skips the menu and
starts play from the first title.
To return to the menu during play,
•
You can change the video
play options here without
interrupting playback.
press
BACK (only possible if the
Fits the picture format to the TV
screen.
PBC mode is on).
SCREEN
FIT
2
Press DISC to preview the contents of
the disc.
•
You can watch the movie in
full screen on TV.
•
To exit the menu, press DISC.
Note
Select Digest Type:
• Some operations may not work with some
discs. See the information accompanying the
disc for details.
Track Digest
Disc Interval
Track Interval
3
Select a preview play option, then press
OK
[Track Digest]
Plays the first few seconds of each track in a
disc.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
[Disc Interval]
Divides the total disc time by six and play the
first few seconds of these intervals.
Quick skip play to a specific time
[Track Interval]
Divides the current track by six and play the
first few seconds of these intervals.
This option is not available in stop mode.
1
2
During play, press INFO.
The disc status menu is displayed.
»
Press
to view information, then press
Tip
OK.
• You can change the PBC setting (see ‘Adjust
settings’ > ‘Preferences’ > [PBC]).
•
•
•
•
[TT Time] (title time)
[Ch Time] (chapter time)
[Disc Time] (disc time)
[Track Time] (track time)
Sync audio output with video play
3
Press the Numeric buttons to enter the
time where you want to skip to, then
press OK.
If the video play is slower than the audio
output (sound does not match with the
pictures), you can delay the audio output to
match the video.
Note
• The options are different depending on the
disc type.
Repeat play a specific section
1
2
During play, press REPEAT A-B where
you want to set as the starting point.
1
2
Press and hold AUDIO SYNC until
‘AUDIO SYNC’ is displayed.
Press REPEAT A-B again to set the
ending point.
Within five seconds, press VOL +/- to set
the delay time for audio output.
»
Repeat play starts.
Note
3
To cancel repeat play, press REPEAT A-B
again.
• If the volume control is not used within five
seconds, it resumes normal volume control
function.
Note
• The marked section for repeat play is only
possible within a track/title.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
View video play from different camera
angles
Note
• You can only play DivX videos that were
rented or purchased with the DivX
registration code of this Home Theatre System
(see ‘Adjust settings’ > ‘General setup’ >
[DivX(R) VOD Code]) .
• You can play DivX video files of up to 4 GB.
• If the subtitle does not appear correctly,
change the character set (see ‘Adjust settings’
> ‘Preferences’ > [DivX Subtitle]).
1
During play, press INFO.
The disc status menu is displayed.
»
2
3
Select [Angle], then press
.
Press the Numeric buttons to select an
angle, then press OK.
»
Play changes to the selected angle.
• This Home Theatre System can display up to
45 characters in the subtitle.
Note
• Applicable only to discs containing multi-angle
scenes.
Play music
Control audio track play
Play DivX® video
1
2
Play a track.
DivX video is a digital media format that
retains high quality despite a high rate of
compression. You can enjoy DivX video on
this DivX® Certified product.
Use the remote control to control the
track.
Button
Action
1
2
Insert a disc or USB that contains the
DivX videos.
Starts, pauses or resumes
playback.
Press DISC or USB.
Stops play.
»
A contents menu is displayed.
Skips to the next track.
Skips to the beginning of
the current track. Press
twice to jump to the
previous track.
3
4
Select a title to play, then press
.
Use the remote control to control the
title.
Button
Action
Selects an item to play.
AUDIO
SYNC
Selects an audio language or
channel.
SUBTITLE Selects a subtitle language for
video.
/
Searches fast-forward
(right) or fast-backward
(left). Press repeatedly to
change the search speed.
Stops play.
For DivX Ultra video, press
this button again to display the
contents menu.
•
To change search
speed, press this
button repeatedly.
INFO
Displays DivX Ultra video
information.
REPEAT
Selects or turns off repeat
or shuffle mode.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Play MP3/WMA music
Play photo
MP3/WMA is a type of highly compressed
audio file (files with .mp3 or .wma extensions).
Play photo as slideshow
1
2
Insert a disc or USB that contains the
MP3/WMA music.
This product can play JPEG photos (files with
.jpeg or .jpg extensions).
Press DISC or USB.
1
2
Insert a disc or USB that contains the
JPEG photos.
»
A contents menu is displayed.
3
4
Select a folder, then press OK.
Press DISC or USB.
»
Slideshow begins (for Kodak disc) or
a contents menu (for JPEG disc) is
displayed.
Select a track to play, then press
.
•
To return to the main menu, press
BACK or press until the
‘Previous’ folder is selected, then
press OK.
3
Select the folder/album you want to play.
•
To preview the photos in the folder/
album, press INFO.
Note
• For a disc recorded in multiple sessions, only
the first session is played.
• This product does not support MP3PRO audio
format.
• If any special characters are present in the MP3
track name (ID3) or album name, it might not
be displayed correctly on the screen because
these characters are not supported.
• Some WMA files are protected by Digital
Rights Management and cannot be played on
this product.
• Folders/files that exceed the supported limit of
this product will not be displayed or played.
•
•
•
To go to previous or next screen
Tip
display, press
/
.
To select a photo, press the
Navigation buttons.
To display the selected photo only,
press OK.
• You can select the display of data contents,
view folders or files (see ‘Adjust settings’ >
‘Preferences’ > [MP3/JPEG Display]).
4
Press
to start slideshow play.
•
To return to the menu, press
BACK.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
»
Audio continues to play till the end of
the disc.
Note
• You may require more time to display the disc
content on the TV due to the large number of
songs/photos compiled onto one disc.
•
•
To stop slideshow play, press
To stop music play, press again.
.
• If the JPEG photo is not recorded with an ‘exif’
type file, the actual thumbnail picture is not
shown on the display. It is replaced by a ‘blue
mountain’ thumbnail picture.
• This product can only display digital camera
pictures according to the JPEG-EXIF format,
typically used by almost all digital cameras.
It cannot display Motion JPEG and pictures
in formats other than JPEG or sound clips
associated with pictures.
Play from USB device
This product plays/views MP3,WMA, DivX
(Ultra) or JPEG files on the following USB
devices:
•
digital camera that complies with the PTP
standard
• Folders/files that exceed the supported limit of
this product will not be displayed or played.
•
•
•
flash drive
memory card reader
HDD (external power source needed)
Control photo play
1
2
Play photo slideshow.
Use the remote control to control the
photo.
Button
Action
Skips to the previous photo.
Skips to the next photo.
Rotates the photo clockwise.
Rotates the photo anti-
clockwise.
ZOOM
Zooms in or out of the
picture.
Play pause in zoom mode.
1
2
Connect a USB device to the
jack.
(USB)
Press USB.
Stops play.
»
A contents menu is displayed.
3
Select a file to play, then press
.
»
Play starts.
Play musical slideshow
•
To stop play, press or remove the
USB device.
Play MP3/WMA music files and JPEG
photo files simultaneously to create musical
slideshow. The MP3/WMA and JPEG files
must be stored on the same disc or USB
device.
Note
• If the device does not fit into the USB jack,
connect it through a USB extension cable.
• If you connect a multiple USB card/device
reader, only one card/device can be accessed.
1
2
Play MP3/WMA music.
Navigate to the photo folder/album and
press OK to start slideshow play.
»
Slideshow begins and continues till the
end of the photo folder or album.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Play from portable media
player
Play from radio
Check that the FM antenna has been connected
to this Home Theatre System. If not, connect
the supplied FM antenna to the FM75 jack
and fix its ends to the wall.
Simply connect your portable media player (e.g.
MP3 player) to this Home Theatre System to
enjoy superb sound quality from your music
collections.
FM (75 Ω)
ANTENNA
MP3
Tip
1
Connect a 3.5 mm stereo audio cable
(not supplied) from the MP3 LINK jack
on this Home Theatre System to the
‘headphone’ jack on the portable media
player.
• For the best reception, place the antenna away
from your TV and other sources of radiation.
• For even better reception of FM stereo,
connect an external FM antenna (not
supplied).
2
3
Press AUDIO SOURCE repeatedly until
‘MP3 LINK’ is displayed.
Start play on your portable media player.
First time tuning
•
To stop play, press STOP on the
When you access radio mode for the first
time, follow the instruction to install the radio
stations.
portable media player.
Note
1
Press RADIO.
’AUTO INSTALL ... PRESS PLAY’ is
displayed.
• Control playback is only possible on the
portable media player.
• Stop play on the portable media player before
you switch to other play media/source.
»
2
Press
.
»
All detected radio stations are stored.
»
Once complete, it tunes to the first
preset radio station.
•
To stop auto tuning, press
.
Note
• This Home Theatre System can store up to a
maximum of 40 radio stations.
• If auto installation is not activated or less
than 5 radio stations are stored, you will be
prompted to install the radio stations again.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Listen to radio
Search and store radio stations
individually
1
2
Press RADIO.
1
2
Press RADIO.
Press
Use the remote control to control the
radio.
/
.
»
It starts searching until a radio station
is detected.
Button
Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
3
4
Repeat step 2 until you tune to the radio
station you wish to store.
•
To finetune the radio frequency,
press
Press PROGRAM.
Press and hold this button to
erase the current radio station
from the preset list.
/
.
»
The preset station number blinks.
•
The preset number for
other radio stations remain
unchanged.
»
If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
5
6
Press
/
(or the Numeric buttons) to
Reinstall all the radio stations
select a preset number to store.
1
2
Press RADIO.
Press PROGRAM to confirm.
Press and hold PROGRAM for more than
5 seconds.
Note
»
All previously stored radio stations are
replaced.
• If the FM radio station transmits RDS (Radio
Data System) data, the name of the radio
station is displayed.
Note
• Check the radio antenna connection if no
stereo signal is detected or less than 5 stations
are detected during radio installation.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select the audio track, then press OK.
6 Advanced
features
•
•
•
To select another track, repeat step
6.
To select all tracks, select [Select
All] in the menu and press OK.
To deselect all tracks, select
[Deselect all] in the menu and press
OK.
Create MP3 audio files
You can convert audio CDs into MP3 audio
files with this Home Theatre System.The
created MP3 audio files are saved in your USB
device.
Select [Start] in the menu to convert,
then press OK.
»
Once complete, a new folder is
created automatically in the USB
device to store all the new MP3 files.
Option
Description
•
To exit the menu, select [Exit] and
press OK.
[Speed]
Selects the write-to-file speed.
If [Normal] speed is selected,
music play can be heard while
creating the MP3 file.
Note
[Bitrate] Selects the quality level. Higher
bitrate for better sound quality
and bigger file size.
• While you convert, do not press any buttons.
• DTS CDs and copy-protected CDs cannot be
converted.
• Write-protected or password-protected USB
devices cannot be used to store MP3 files.
Default setting is [128kbps].
CREATE MP3
TRACK
OPTIONS
Track01
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Normal
Track02
Track03
Track04
Track05
Track06
Track07
Bitrate
128kbps
SUMMARY
Select Track
Time
0
00:00
Select All
Start
Exit
Deselect All
1
2
Insert an audio CD (CDDA/HDCD).
Connect the USB flash drive to the
(USB) jack on this Home Theatre System.
3
4
During disc play, press CREATE MP3.
Select the conversion options in the
[OPTIONS] panel, then press OK.
5
Press to access the [TRACK] panel.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Adjust sound
Select a preset sound
Control the volume
1
Press VOL +/- to increase or decrease
the volume.
1
Press SOUND repeatedly to select the
sound effect that is most suitable for the
video or music you play.
•
•
To mute, press
To restore the volume, press again
or press VOL +.
.
Video/Music
Description
ACTION / Enhanced low and high range
Select surround sound
ROCK
for great sounding movie
effects and atmosphere. Great
for action movies and rock/
pop music.
CONCERT/ Flat and pure sound mode.
CLASSIC
Ideal for listening to classical
music and watching live
concert disc.
1
Press SURR repeatedly to select the best
surround output that’s available on the
disc.
DRAMA /
JAZZ
Clear mid and high range.
Recreates the atmosphere of
a live club with the artist just
in front of you. Good for jazz
music and watching dramas.
Moderate mid range and
surround effects for clear
vocals and the atmosphere of
a live sports venue. It is also
ideal for video gaming.
Dynamically controlled
sound mode suitable for
watching movies at night or
for nonintrusive background
music.
Option
Description
5 CH
STEREO
Enhances the stereo channel
output by duplicating the
sound output to the centre
and rear speakers. Ideal for
party music.
SPORTS
NIGHT
MULTI-
Multi-channel surround
CHANNEL/ output: DTS (Digital Theatre
DPLII
Systems), Dolby Digital and
Dolby Pro Logic II.
STEREO
Stereo sound from two front
speakers.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Select an option, then press OK.
8 Adjust settings
Select a setting, then press OK.
•
To return to the previous menu,
press BACK.
To exit the menu, press SETUP.
You can customise various kinds of settings as
you prefer. Refer to the following instructions to
navigate through the setup menus.
•
Note
Symbol
Options
• See the explanations of the above options in
the following pages.
[General Setup]
[EasyLink Setup]
[Audio Setup]
[Video Setup]
[Preferences]
If this Home Theatre System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option
Description
[EasyLink] Turns off or on all EasyLink
features.
To disable this feature, select
[Off].
[One
Touch
Play]
When you press PLAY, the
TV and Home Theatre System
are turned on. Disc play starts
if there is a disc in the Home
Theatre System.
Note
• If the setup option is greyed out, it means the
setting cannot be changed in the current state.
To disable this feature, select
[Off].
General setup
[One
Touch
When you press and hold
STANDBY for at least three
Standby] seconds, the Home Theatre
System and all the HDMI CEC
devices switch to standby
simultaneously.
General Setup
EasyLink Setup
Disc Lock
Display Dim
To disable this feature, select
[Off].
OSD Language
Screen Saver
Sleep Timer
DivX(R) VOD Code
1
2
Press SETUP.
[General Setup] menu is displayed.
»
Press
.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[Display Dim]
Option
Description
Changes the brightness level of the display
panel on this Home Theatre System.
[System When you play audio that is
Audio routed from the connected
Control] devices, this Home Theatre
System switches to the
•
•
•
[100%] – Normal brightness.
[70%] – Medium brightness.
[40%] – Dimmest display.
corresponding audio source
automatically.
To enable this feature, select
[On]. Then proceed to [Audio
Input Mapping] to scan and map
all the connected devices.
[OSD Language]
Selects the default on-screen menu language.
[Screen Saver]
[Audio
Input
When you map the audio
input correctly, this Home
Mapping] Theatre System switches to the
audio from the played device
automatically.
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to a static image for too
long.
•
[On] – Sets the screen saver to appear
after 5 minutes of inactivity (for example,
in pause or stop mode).
Note
•
[Off] – Disable screen saver mode.
• You must turn on the HDMI CEC operations
on the TV/devices before you can enjoy the
EasyLink controls. See the TV/devices manual
for details.
[Sleep Timer]
• Philips does not guarantee 100%
interoperability with all HDMI CEC compliant
devices.
Switches to standby automatically after the
preset time.
•
[15 mins], [30 mins], [45 mins], [60 mins]
– Selects the countdown time before
the Home Theatre System switches to
standby.
[Disc Lock]
Sets play restriction for a specific disc.
Before you start, place the disc in the disc
compartment (a maximum of 40 discs can be
locked).
•
[Off] – Disables sleep timer mode.
[DivX(R) VOD Code]
Displays the DivX® registration code.
•
[Lock] – Restricts access to the current
disc. Once activated, a password is
needed to unlock and play the disc.
[Unlock] – Plays all discs.
Tip
•
• Enter this Home Theatre System DivX
registration code when you rent or purchase
videos rented or purchased through the
DivX® VOD (Video On Demand) service
can be played only on the device to which it is
registered.
Tip
• You can set or change the password (see
‘Adjust settings’ > ‘Preferences’ > [Password]).
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
[Speakers Delay]
Audio setup
Sets the delay time for the centre and rear
speakers if they are placed closer to the
listening position, so that the sound output
from all speakers reaches the listening position
at the same time.
Audio Setup
Speakers Volume
Speakers Delay
HDMI Audio
1) To start, press OK.
CD Upsampling
Audio Sync
2) Select a speaker in the menu, then press
to set the delay time.
3) Press OK to confirm and exit.
Note
1
2
Press SETUP.
[General Setup] menu is displayed.
• Allow 1 ms setting for every 1 foot distance
between the speaker and the listening position.
»
Press to select [Audio Setup], then
press
.
[HDMI Audio]
3
4
Select an option, then press OK.
Selects the HDMI audio setting when you
connect this Home Theatre System and the
TV with a HDMI cable.
Select a setting, then press OK.
•
To return to the previous menu,
press BACK.
To exit the menu, press SETUP.
•
[On] – Allows audio output through the
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
[Off] – Disables audio output from the
TV. The sound is only output through the
speaker system.
•
Note
• See the explanations of the above options in
the following pages.
•
[Speakers Volume]
Sets the volume level of each speaker to get
the ideal audio balance.
[CD Upsampling]
Converts the music CD to a higher sampling
rate using sophisticated digital signal
processing for better sound quality.
1) To start, press OK.
2) Select a speaker in the menu, then press
to adjust the volume level.
•
•
[Off] – Disables CD upsampling.
[88.2kHz (X2)] – Converts the sampling
rate of the CDs to twice as high as the
original rate.
3) Press OK to confirm and exit.
Note
Note
• The test tone is emitted from the speaker
which you adjust.
• CD upsampling is only available in stereo
mode.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[Audio Sync]
[TV System]
Sets the default delay time for audio output
when you play a video disc.
Changes this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
1) To start, press OK.
2) Select a speaker delay in the menu, then
•
•
•
[PAL] – For PAL-system TV.
[NTSC] – For NTSC-system TV.
[Multi] – For TV that is compatible with
both PAL and NTSC.
press
to set the delay time.
3) Press OK to confirm and exit.
[TV Display]
Selects one of the following display formats:
Video setup
Video Setup
TV System
TV Display
Screen Fit
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
16:9 (Wide Screen)
Picture Setting
HDMI Setup
•
•
[4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9 Wide Screen] – For wide-screen
TV: display ratio 16:9.
Closed Caption
•
1
2
Press SETUP.
[General Setup] menu is displayed.
»
Press to select [Video Setup], then
press
[Screen Fit]
Fits the picture format to the TV screen to
enjoy watching disc play in full screen mode.
.
3
4
Select an option, then press OK
•
[Select] – Displays various types of full
screen format, press OK to select a
suitable picture format that best fits to
the TV screen.
Select a setting, then press OK.
•
To return to the previous menu,
press BACK.
To exit the menu, press SETUP.
•
•
[Off] – Returns to normal screen display.
Note
[Picture Setting]
Selects a predefined set of picture colour
settings or customises the personal setting.
• See the explanations of the above options in
the following pages.
•
•
•
•
[Standard] – Original colour setting.
[Bright] – Vibrant colour setting.
[Soft] – Warm colour setting.
[Personal] – Customises the colour
setting. Set the level of brightness,
contrast, sharpness/tint and colour
saturation, then press OK.
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
[HDMI Setup]
[Closed Caption]
Selects the HDMI video setting when you
connect this Home Theatre System and the
TV with a HDMI cable.
Turns off or on display captions.
•
[On] – Shows the sound effects in
subtitles. Applicable only to discs with
Closed Caption information included and
the TV supports this feature.
•
[Wide Screen Format] – Defines the
•
[Off] – Disables closed caption.
wide screen format for disc play.
Option
Description
[Superwide]
Centre position of the
screen is stretched less
than the side. Applicable
only to 720p and above
video resolution settings.
No stretching of the
picture. Black bars are
displayed on both sides of
the screen.
Preferences
Note
[4:3 Pillar
Box]
• Stop disc play before you can access
[Preferences].
[Off]
Picture is displayed
according to the format of
the disc.
Preferences
Audio
Subtitle
Disc Menu
Note
Parental
• This setting is only available if you have set the
[TV Display] setting to [16:9 Wide Screen].
PBC
MP3/JPEG Display
Password
DivX Subtitle
•
[HDMI Video] – Selects the HDMI video
output resolution that is compatible with
your TV display capability.
1
2
Press SETUP.
[General Setup] menu is displayed.
»
Option
Description
Press to select [Preferences], then
press
[Auto]
Detects and selects the
best supported video
resolution automatically.
Selects a video resolution
that is best supported
by the TV. See the TV
.
3
4
Select an option, then press OK.
Select a setting, then press OK.
[480i], [576i],
[480p],
[576p],[720p],
•
To return to the previous menu,
press BACK.
To exit the menu, press SETUP.
•
[1080i],[1080p] manual for details.
Note
Note
• See the explanations of the above options in
the following pages.
• If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for
auto recover or switch to its default mode as
follows: 1) Press . 2) Press . 3) Press ZOOM.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[Audio]
[PBC]
Selects the default audio language for disc play.
Turns off or on the content menu of VCDs/
SVCDs with PBC (playback control) feature.
•
[On] - Displays index menu when you
load a disc for play.
[Off] - Skips the menu and starts play
from the first title.
[Subtitle]
Selects the default subtitle language for disc
play.
•
[Disc Menu]
Selects the language for the disc menu.
[MP3/JPEG Display]
Selects to display the folders or display all the
files.
•
Note
[View Folders] – Displays the folders of
MP3/WMA files.
[View Files] – Displays all the files.
• If the language you have set is not available on
the disc, the disc uses its own default language.
• For some discs, the subtitle/audio language can
only be changed from the disc menu.
•
• To select the languages that are not listed
in the menu, select [Others]. Then check
the Language Code list at the back of this
user manual and enter the respective 4-digit
language code.
[Password]
Sets or changes the password for locked discs
and play restricted DVDs.
Change Password
Old Password
[Parental]
New Password
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
Confirm Password
OK
1) Press OK.
2) Select a rating level, then press OK.
3) Press the Numeric buttons to enter the
password.
1) Press the Numeric buttons to enter
‘136900’ or the last set password at [Old
Password] field.
2) Enter the new password at [New
Password] field.
Note
3) Enter the new password again at [Confirm
Password] field.
4) Press OK to exit the menu.
• Rated discs above the level you set in
[Parental] require a password to be played.
• The ratings are country-dependent. To allow
all discs to play, select ‘8’.
• Some discs have ratings printed on them but
are not recorded with ratings. This function
has no effect on such discs.
Note
• If you forget the password, enter ‘136900’
before you set a new password.
Tip
• You can set or change the password (see
‘Preferences’ > [Password]).
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
[DivX Subtitle]
Selects a character set that supports the DivX
subtitle.
[Standard]
English, Irish, Danish,
Estonian, Finnish,
French, German,
Italian, Portuguese,
Luxembourgish, Norwegian
(Bokmål and Nynorsk),
Spanish, Swedish, Turkish
Polish, Czech, Slovak,
Albanian, Hungarian,
Slovene, Croatian, Serbian
(Latin script), Romanian
Belarusian, Bulgarian,
Ukrainian, Macedonian,
Russian, Serbian
[Central
Europe]
[Cyrillic]
[Greek]
Greek
[Hebrew]
Hebrew
[Chinese(Simp)] Simplified Chinese
[Korean] Korean
Note
• Ensure that the subtitle file has the exact same
file name as the movie file. If, for example, the
file name of the movie is ‘Movie.avi’, then you
will need to name the text file ‘Movie.sub’ or
‘Movie.srt’.
[Version Info.]
Displays the software version of this Home
Theatre System.
Tip
• This information is required when you want to
find out if a newer software version is available
at the Philips website that you may download
and install on this Home Theatre System.
[Default]
Resets all the settings of this Home Theatre
System to factory default, except for [Disc
Lock], [Password] and [Parental] settings.
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
9 Additional
Information
• Do not remove the CD-R or USB when
software updating is in progress.
8
Disconnect the power cord for a few
seconds and connect again to reboot the
system.
Update software
To check for new updates, compare the current
software version of your Home Theatre System
with the latest software version (if available) at
the Philips website.
Care
Caution
Preferences
• Never use solvents such as benzene, thinner,
cleaners available commercially or anti-static
sprays intended for discs.
Disc Menu
Parental
PBC
Clean discs
MP3/JPEG Display
Password
Wipe the disc with a micro fibre cleaning cloth
from the centre to the edge in a straight line
movement.
DivX Subtitle
Version Info.
Default
Clean main unit screen
Wipe the screen surface with a micro fibre
cleaning cloth.
1
2
Press SETUP.
Select [Preferences] > [Version Info.],
then press OK.
3
4
Write down the version number, then
press SETUP to exit the menu.
the latest software version available for
this Home Theatre System.
5
If the latest software version is higher
than the software version of this Home
Theatre System, download it and store it
on a CD-R or USB flash drive.
6
7
Insert the CD-R or USB flash drive to this
Home Theatre System.
Press DISC or USB, then follow the
instructions on the TV to confirm update
operation.
»
Once software update is complete,
this Home Theatre System turns off to
standby automatically.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
PCM: IEC 60958
Dolby Digital: IEC 60958, IEC 61937
DTS: IEC 60958, IEC 61937
10 Specifications
Note
Radio
•
•
•
•
•
•
Tuning range: FM 87.5–108 MHz (50 kHz)
• Specification and design are subject to change
26 dB quieting sensitivity: FM 22 dBf
IF rejection ratio: FM 60 dB
Signal-to-noise ratio: FM 50 dB
Harmonic distortion: FM 3%
Frequency response: FM 180 Hz~10 kHz
/ ±6dB
without notice
Playback media
•
DVD-Video, DVD+R/+RW, DVD-R/-
RW, DVD+R DL, CD-R/CD-RW, Audio
CD, Video CD/SVCD, Picture CD, MP3-
CD, WMA-CD, DivX-CD, USB flash
drive
•
•
Stereo separation: FM 26 dB (1 kHz)
Stereo Threshold: FM 29 dB
USB
Amplifier
•
•
Compatibility: High Speed USB (2.0)
Class support: UMS (USB Mass Storage
Class)
•
Total output power:
•
HTS3270, HTS3277, HTS3269:
420 W RMS
•
File system: FAT12, FAT16, FAT32
•
•
HTS3377, HTS3376: 1000 W RMS
HTS3377W, HTS3376W:
1000 W RMS (wired, 6 x 167)
1000 W RMS (wireless, 10%
tolerance)
Main Unit
•
Power supply:
•
HTS3270, HTS3277, HTS3269:
110-240 V; ~50-60 Hz
HTS3377/W, HTS3376/W:
220-240V; ~50 Hz
•
•
Frequency response: 40 Hz – 20 kHz
Signal-to-noise ratio: > 60 dB (A-
weighted)
•
•
Input sensitivity:
•
Power consumption:
•
•
•
AUX: 400 mV
SCART TO TV: 200 mV
MP3 LINK: 250 mV
•
•
HTS3270, HTS3277, HTS3269: 80 W
HTS3377/W, HTS3376/W: 180 W
•
•
Standby power consumption: < 1 W
Dimensions (W x H x D):
•
HTS3270, HTS3377, HTS3376,
HTS3277, HTS3269: 360 x 57 x 331
(mm)
HTS3377W. HTS3376W: 360 x 57 x
341 (mm)
Disc
•
•
•
Laser Type: Semiconductor
Disc diameter: 12 cm/8 cm
Video decoding: MPEG1/MPEG2/DivX/
DivX Ultra
•
•
Weight:
•
•
•
•
•
Video DAC: 12 bits, 108 MHz
Signal system: PAL/NTSC
Video S/N: 56 dB
Audio DAC: 24 bits/96 kHz
Frequency response:
•
HTS3270, HTS3377, HTS3376,
HTS3277, HTS3269: 2.87 kg
•
HTS3377W. HTS3376W: 3.01 kg
•
•
•
4 Hz - 20 kHz (44.1 kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 44 kHz (96 kHz)
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakers
Subwoofer
•
•
System: full range satellite
Speaker impedance:
•
•
•
•
Impedance: 4 ohm
Speaker drivers: 165 mm (6.5”) woofer
Frequency response: 40 Hz – 150 Hz
Dimensions (W x H x D):
•
•
•
HTS3270, HTS3277, HTS3269:
4 ohm (centre), 8 ohm (Front/Rear)
HTS3377/W, HTS3376/W: 4 ohm
(centre), 4 ohm (Front/Rear)
•
HTS3270, HTS3269: 123 x 310 x 369
(mm)
Speaker drivers: 3” full range
•
HTS3377/W, HTS3376/W, HTS3277:
163 x 363 x 369 (mm)
•
•
Frequency response: 150 Hz – 20 kHz
Dimensions (W x H x D):
•
Weight:
•
HTS3270, HTS3269:
- Centre/Front/Rear: 100 x 100 x 75
(mm)
•
•
HTS3270, HTS3269: 3.88 Kg
HTS3377/W, HTS3376/W, HTS3277:
4.85 kg
•
HTS3377/W, HTS3376/W. HTS3277:
- Centre: 244 x 103 x 74 (mm)
- Front: 103 x 203 x 71 (mm)
- Rear: 262 x 1199 x 264 (mm)
Wireless receiver (For HTS3377W,
HTS3376W only)
•
•
•
•
•
•
Power Consumption: 50 W
Frequency Response: 6000 Hz
S/N Ratio: 60 dB (A-Weighted)
Input Sensitivity: 400-600 mV
Distortion: 1 %
Dimensions (W x H x D): 126 x 130.5 x
126 (mm)
Weight: 1.11 kg
•
Weight:
•
•
•
•
HTS3270:
- Centre: 0.66 kg
- Front: 0.39 kg
- Rear: 0.38 kg
HTS3377, HTS3377W. HTS3277:
- Centre: 0.79 kg
- Front: 0.54 kg
- Rear: 3.38 kg
HTS3376, HTS3376W:
- Centre: 0.85 kg
- Front: 0.58 kg
- Rear: 3.55 kg
•
Laser specification
•
•
Type: Semiconductor laser GaAIAs (CD)
Wave length: 645–665 nm (DVD),
770–800 nm (CD)
Output power: 6 mW (DVD), 7 mW
(VCD/CD)
Beam divergence: 60 degrees.
HTS3269:
•
•
- Centre: 0.67 kg
- Front: 0.48 kg
- Rear: 0.45 kg
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
11 Troubleshooting
No picture.
•
See TV manual for correct video input
channel selection. Change the TV channel
until you see the DVD screen.
Press DISC.
If you have changed the [TV Display]
setting, switch back to default mode: 1)
Press to open the disc compartment. 2)
Press . 3) Press SUBTITLE.
Warning
• Risk of electric shock. Never remove the
casing of the product.
•
•
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, register your product
No picture on HDMI connection.
•
Check if the HDMI cable is faulty. Replace
a new HDMI cable.
•
If this happens when you change the
HDMI video resolution, you have to
switch to its default mode: 1) Press . 2)
Press . 3) Press ZOOM.
If you contact Philips, you will be asked for the
model and serial number of your product.The
model number and serial number are on the
back or bottom of your product.Write the
numbers here:
Model No. __________________________
Serial No. ___________________________
Sound
No sound.
•
Make sure that the audio cables are
connected and select the correct input
source (for example, AUDIO SOURCE,
USB) for the device you want to play.
Main unit
The buttons on this product do not work.
•
Disconnect this product from the socket
for a few minutes, then connect again.
No sound on HDMI connection.
•
If the connected device is not HDCP-
compliant or is only DVI-compatible, you
cannot transmit sound through an HDMI
connection. Use an analogue or digital
audio connection.
•
Make sure that the [HDMI Audio] setting
is turned on.
No sound from TV programme.
•
Connect an audio cable from the AUDIO
input on this Home Theatre System to
the AUDIO output on your TV. Then
press AUDIO SOURCE repeatedly to
select the corresponding audio input
source.
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
No surround sound effect from the speakers.
The contents of the USB flash drive cannot
•
Press SURR to select a correct surround
sound setting.
If the Home Theatre System supports
DTS playback, press AUDIO SYNC to
select other audio track.
Ensure that the source you are playing
is recorded or broadcast in surround
sound (Dolby Digital etc.). Sound cannot
transmit through HDMI connection if
the connected device is non-HDCP
compliant or only DVI-compatible. Make
an analogue or digital audio connection.
be read.
•
•
•
The USB flash drive format is not
compatible with this Home Theatre
System.
Drive is formatted with a different file
system which is not supported by this
unit (e.g. NTFS).
•
•
Maximum size of memory supported is
160 GB.
No sound from the rear speakers and the
indicator on the wireless receiver blinks
continuously for more than one minute. (For
HTS3377W, HTS3376W only)
•
Ensure that all required connections are
connected and carry out the following
steps: 1) Press . 2) Press INFO. A
screen is displayed. 3) Press 1, then press
the SURR button within 5 seconds.
‘PAIRING SUCCESS’ is displayed. 4) If
‘PAIRING FAIL’ is displayed, repeat steps
1 to 3.
Play
DivX video files cannot be played.
•
Make sure that the DivX file is encoded
according to the ‘Home Theatre Profile’
with the DivX encoder.
•
Make sure that the DivX video file is
complete.
The aspect ratio of the screen is not aligned
with the TV display setting.
•
The aspect ratio is fixed on the disc.
DivX subtitle does not display correctly.
•
•
Ensure that the subtitle file name is the
same as the movie file name.
Select the correct character set: 1) Press
SETUP. 2) Select [Preferences], then
press . 3) Select [DivX Subtitle], then
press OK. 4) Select the character set that
supports the subtitle.
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI
12 Glossary
High-Definition Multimedia Interface (HDMI)
is a high-speed digital interface that can
transmit uncompressed high definition video
and digital multichannel audio. It delivers high
quality picture and sound quality, completely
free from noise. HDMI is fully backward-
compatible with DVI.
As required by the HDMI standard,
connecting to HDMI or DVI products without
HDCP (High-bandwidth Digital Content
Protection) will result in no Video or Audio
output.
A
Aspect ratio
Aspect ratio refers to the length to height
ratio of TV screens. The ratio of a standard
TV is 4:3, while the ratio of a high-definition
or wide TV is 16:9. The letter box allows you
to enjoy a picture with a wider perspective on
a standard 4:3 screen.
D
DivX®
J
JPEG
The DivX® codec is a patent-pending,
MPEG-4 based video compression technology
developed by DivX®, Inc. It can shrink the
file size of digital video and still maintain high
visual quality.
A very common digital still picture format.
A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which causes only a small decrease in
image quality in spite of its high compression
ratio. Files are recognised by their file
extension ‘.jpg’ or ‘.jpeg’.
Dolby Digital
A surround sound system developed by Dolby
Laboratories that contains up to six channels
of digital audio (front left and right, surround
left and right, centre and subwoofer.)
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
H
HDCP
High-bandwidth Digital Content Protection.
This is a specification that provides a secure
transmission of digital contents between
different devices (to prevent unauthorised
copyright.)
MPEG
Motion Picture Experts Group. A collection
of compression systems for digital audio and
video.
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
P
PBC
Playback Control. A system where you
navigate through a Video CD/Super VCD with
on-screen menus that are recorded onto the
disc. You can enjoy interactive playback and
search.
PCM
Pulse Code Modulation. A digital audio
encoding system.
Progressive scan
The progressive scan displays twice as many
frames per second as an ordinary TV system.
It offers higher picture resolution and quality.
W
WMA
Windows Media™ Audio. Refers to an
audio compression technology developed by
Microsoft Corporation. WMA data can be
encoded with Windows Media player version
9 or Windows Media player for Windows XP.
Files are recognised by their file extension
‘.wma.’
WMV
Windows Media Video. Refers to a video
compression technology developed by
Microsoft Corporation. WMV content can be
encoded by using Windows Media® Encoder
9 series. Files are recognised by their file
extension ‘.wmv’.
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|