Philips Home Gym Recumbent Bike User Manual

®
Dedication to Quality  
We warrant this product to be free from all  
defects in material and workmanship when used  
according to the manufacturer’s instructions.  
See Limited Warranty Card for details.  
491r  
Recumbent  
Bike  
Save your sales receipt.  
(You may wish to staple it into this manual.)  
OWNER’S MANUAL  
FOR MAXIMUM EFFECTIVENESS  
AND SAFETY, PLEASE READ THIS  
OWNERS MANUAL BEFORE USING YOUR  
EDGE 491r Recumbent Bike.  
12/15/05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADDITIONAL WORKOUT PROGRESS CHARTS  
IMPORTANT SAFETY INSTRUCTIONS  
Read all instructions before using this equipment  
Resting  
Heart Rate  
Date  
Weight  
Hips  
Thighs  
Calves  
Waist  
Abdomen  
CAUTION:  
Exercise of a strenuous nature, as is customarily done on this equipment,  
should not be undertaken without first consulting a physician.  
No specific health claims are made or implied as they  
relate to the equipment.  
1) Before starting this or any other exercise  
8) After an exercise session, cool down with slow  
program, consult your physician, who can assist  
you in determining the target heart rate zone  
appropriate for your age and physical condition.  
Certain exercise programs or types of equipment  
may not be appropriate for all people. This is  
especially important for people over the age of  
35, pregnant women, or those with pre-existing  
health problems or balance impairments.  
walking and stretching.  
9) This equipment should not be used by or near  
children.  
10) Handicapped or disabled people must have  
medical approval before using this equipment  
and should be under close supervision when  
using any exercise equipment.  
11) If you are taking medication which may  
affect your heart rate, a physician's advice  
is absolutely essential.  
2) Monitor your heart rate while you exercise and  
keep your estimated pulse rate within your  
target heart rate zone. Follow the instructions  
on pages 16 - 18 in this manual regarding heart  
rate monitoring and how to determine your  
appropriate target heart rate zone. When used  
properly, the heart rate pulse sensors and display  
monitor provide a reasonably accurate estimate  
of your actual heart rate. This estimate is not  
exact and persons with medical conditions  
and/or a specific need for accurate heart rate  
monitoring should not rely on the estimations  
provided.  
Resting  
Heart Rate  
Date  
Weight  
Hips  
Thighs  
Calves  
Waist  
Abdomen  
12) Use this equipment only for its intended use as  
described in this manual. Do not use attach-  
ments not recommended by the manufacturer.  
13) Only one person at a time should use this  
equipment.  
14) Do not put hands, feet, or any foreign objects on  
or near this equipment when in use by others.  
15) Always use this equipment on a level surface.  
16) Never operate the equipment if the equipment  
3) Warm up before any exercise program by  
doing 5-10 minutes of aerobic activity, followed  
by stretching.  
is not functioning properly.  
17) Start exercise slowly and gradually increase the  
amount of resistance.  
4) Wear comfortable clothes that allow freedom of  
18) If the user experiences dizziness, nausea, chest  
pain, or any other abnormal symptoms, stop  
exercise at once and consult a physician  
immediately.  
movement and that are not tight or restricting.  
5) Wear comfortable shoes made of good support  
with non-slip soles.  
6) Breathe naturally, never holding your breath  
19) Use caution not to pinch fingers or hands in  
during an exercise.  
moving parts when using the equipment.  
7) Avoid over training.You should be able to carry  
on a conversation while exercising.  
KEEP THESE INSTRUCTIONS  
2
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNIT WARNING LABEL  
Important: See below for placement of the following warning label on your equipment.  
WARNING LABEL  
WORKOUT PROGRESS CHARTS  
Use the charts below and on the following pages to  
keep track of your progress over time. Before writing  
on them, make as many copies as you think you’ll  
need. We suggest you keep these in a notebook.You  
will find it both informative and motivational to look  
back at what you’ve done, and this data will help you  
to chart future fitness goals as you progress. Every two  
weeks, measure yourself to rechart your progress.  
WARNING  
Measuring Sites  
Waist  
FAILURE TO READ AND FOLLOW THE SAFETY INSTRUCTIONS STATED IN THE  
OWNER’S MANUAL MAY RESULT IN POSSIBLE SERIOUS INJURY OR DEATH.  
KEEP CHILDREN AWAY. MAXIMUM USER WEIGHT 250 LBS.  
Abdomen  
Hips  
REPLACE THIS LABEL IF DAMAGED, ILLEGIBLE OR REMOVED. CLASS HC.  
Thighs (L/R)  
Calves (L/R)  
Resting  
Heart Rate  
Date  
Weight  
Hips  
Thighs  
Calves  
Waist  
Abdomen  
SPECIFICATIONS & PARTS  
Edge 491r  
Specifications:  
Approximate:  
Length: 52”  
Width: 24-1/2”  
Height: 44-3/4”  
Product Weight:  
Approx. 95 lbs.  
EXBC491-40  
Computer  
EXBC491-26  
Backrest  
EXBC491-44  
Book Holder  
EXBC491-41  
Front Handlebar  
Maximum User Weight:  
EXBC491-19  
Seat Carriage  
250 lbs.  
EXBC491-71  
Pulse Sensors  
WARNING  
LABEL  
EXBC491-39  
Computer Tube  
EXBC491-25  
EXBC491-29  
Rear Handlebar  
Seat  
Resting  
Heart Rate  
Date  
Weight  
Hips  
Thighs  
Calves  
Waist  
Abdomen  
EXBC491-12  
Right Front Cover  
EXBC491-23  
Carriage Tube  
EXBC491-81  
Long  
Extension  
Pulse Wire  
EXBC491-35  
Left Pedal  
EXBC491-09  
Support Tube  
EXBC491-02  
Front Foot  
Tube  
EXBC491-11  
Left Rear Cover  
EXBC491-08  
Rear Foot Tube  
EXBC491-13  
Left Front  
Cover  
EXBC491-21  
Locking  
Arm  
Locking Arm  
Grip  
EXBC491-07  
End Cap  
22  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
CARE & STORAGE OF YOUR RECUMBENT BIKE  
Storing Directions  
Your bike is portable. If you need to change the  
location of your bike, please follow the steps below.  
Caring For Your Bike  
CONGRATULATIONS ON PURCHASING YOUR  
EDGE 491r RECUMBENT BIKE  
Your Recumbent Bike has been carefully  
designed to require minimum maintenance.  
However, we recommend the following to  
keep your unit operating smoothly.  
With this product in your home, you have everything you need to start  
your own workout program to tone and firm the major muscle groups of  
your lower body. This is vital for all of us, regardless of age, sex, or fitness  
level, and regardless of whether your primary goal is toning, health  
maintenance, or more energy for daily activities.  
• Stand at the rear of the bike and grasp the  
rear handlebar.  
• Use your bike indoors only.  
• Lift up using your legs – not your back, tipping  
the bike forward until it is resting on the front  
transportation wheels/front rollers.  
• Wipe all perspiration from your bike with a  
soft, clean cloth after each use to prevent  
an accumulation of sweat and dirt.  
Proper exercise, including a low fat diet, strength training and aerobic  
exercise, tones and conditions the muscles we use every day to stand,  
walk, lift and turn. It can actually transform our body composition by  
reducing body fat and increasing the proportion of lean muscle in  
our bodies. Using the bike will help in reducing body fat and increasing  
cardiovascular endurance.  
• Wheel the bike to its new location and carefully  
lower the bike back down to the floor.  
• Clean your bike on a regular basis to  
prevent a build-up of dust. Use Windex or  
an alcohol based cleanser on a clean  
cloth. Do not use any abrasive cleaners  
and/or polish as these will damage  
the surface.  
Be sure to read through this Owner’s Manual carefully.  
• Store your bike in a dry area away from  
children and high traffic areas.  
It is the authoritative source of information about your Edge 491r  
Recumbent Bike.  
• Regularly check the tightness of nuts  
and bolts.  
Retain this manual for future reference.  
COMMENTS OR QUESTIONS  
Dear Customer,  
ORDERING MISSING OR  
DEFECTIVE PARTS  
When ordering parts, please contact our  
Parts Department, toll free at 1-800-497-5831,  
Monday through Friday, 8:30am to 8:00pm, EST.  
Congratulations on your purchase of the  
Edge 491r Recumbent Bike.  
We’re sure that you will be completely satisfied  
with the product and we invite your comments  
so that we can hear about your success.  
IMPORTANT: You must have your serial number and  
this manual ready when calling for parts.  
Serial #:_______________________________  
Please write or call our Customer Service Specialists  
at the address or phone number listed below, or  
contact us by email or on our web site, with any  
comments or questions you may have.  
Please also provide the following information:  
1) Name, Mailing Address and Telephone Number  
2) Date of Purchase  
Edge 491r  
3) Where Product was Purchased  
Customer Service Department  
1400 Raff Road SW, Canton OH 44750-0001  
(Name of Retail Store, City)  
4) Model Number (EXBC00491)  
5) Part Order Number and Description  
1-800-321-9236, Monday through Friday  
8:30am to 8:00pm, Eastern Standard Time  
www.fitnessquest.com  
All details depicted in this Owner’s Manual, and of the  
product itself, are subject to change without notice.  
21  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY INSTRUCTIONS  
4. Back Stretch  
Stand with your legs shoulder length apart and your knees  
slightly bent. Bend forward from your waist with your arms  
extending loosely in front of your body. Gently bend from  
the waist flexing your body as far forward as it will go.  
Occasionally our products contain components that are pre-lubricated  
at the factory. We recommend that you protect flooring, or anything else  
the parts may contact, with newspaper or cloth.  
Hold for 20 to 30 seconds. Straighten up and repeat.  
M8 acorn nuts  
STEP 1 – Front Foot Tube Assembly  
5. Standing Hamstrings Stretch  
a) Remove (2) Carriage Bolts, (2) Washers and  
Stand with your legs hip-width apart. Extend one leg out in  
front of you and keep that foot flat against the ground. With  
your hands resting lightly on your thighs, bend your back leg  
and lean forward slightly from your hips until you feel a stretch  
in the back of your thigh. Be sure to lean forward from the hip  
joint rather than bending at your waist.  
(2) Acorn Nuts from Front Foot Tube.  
M8 washers  
b) Attach Front Foot Tube to front of Frame  
with hardware removed in Step a. Make  
sure to insert Bolts through “square holes”  
on bottom first.  
M8 x 65mm  
carriage bolts  
Hold for 20 to 30 seconds. Repeat for the opposite leg.  
frame  
6. Buttocks, Hips and Abdominal Stretch  
front foot  
tube  
Lay flat on your back with your hips relaxed against the floor.  
Bend one leg at the knee. Keeping both shoulders flat on the  
floor, gently grasp the bent knee with your hands and pull it over  
your body and towards the ground.You should feel a stretch in  
your hips, abdominals and lower back.  
Figure 1 - Install Front Foot Tube  
Hold for 20 to 30 seconds and release. Repeat for opposite side.  
STEP 2 – Rear Foot Tube Assembly  
a) Remove (2) Carriage Bolts, (2) Washers and  
support  
tube  
7. Inner Thigh Stretch  
(2) Acorn Nuts from Frame.  
Sit on the floor and bend your legs so that the soles of your feet  
are together. Place your elbows on your knees. Lean forward  
from the waist and press down lightly on the inside of your knees.  
You should feel a stretch in the muscles of your inside thigh.  
b) Insert (2) Carriage Bolts through “square  
holes” on bottom of Rear Foot Tube, Frame  
and Support Tube and fasten with (2)  
Washers and (2) Acorn Nuts.  
M8  
acorn  
nut  
NOTE: It will be difficult to attach Nuts, but  
they will fit. DO NOT tighten any Nuts until  
you have completed Step 3f on page 6.  
M8  
washer  
8. Arm Pullback  
Stand with your feet shoulder width apart and toes pointing  
forward and with your knees slightly bent. Let your arms hang  
relaxed on either side of your body. Expand your chest and pull  
your shoulders back. Bend your elbows slightly and clasp your  
hands behind your back. Slowly straighten your arms as you lift  
your hands upward. Raise your hands upward until you feel mild  
tension in your shoulder and chest region.  
M8 acorn  
nut  
rear foot  
tube  
M8 washer  
frame  
M8 x 55mm  
carriage bolts  
Hold for 20 to 30 seconds. Lower your arms to their original  
position and bend your elbows. Release your hands and return  
them to your sides.  
Figure 2 - Install Rear Foot Tube  
20  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARM UP & COOL DOWN STRETCHES  
STEP 3 – Seat Carriage Assembly  
Stretches can help improve flexibility and relieve the tightness in muscles  
that results from repetitive sport movements that require a limited range  
of motion. 10 to12 minutes of daily stretching is recommended. This can  
be done when warming up or cooling down. When performing these  
stretches, your movements should be slow and smooth, with no bouncing  
or jerking. Move into the stretch until you feel a slight tension, not pain, in  
the muscle and hold the stretch for 20 to 30 seconds. Breathe slowly and  
rhythmically. Be sure not to hold your breath. Remember that all stretches  
must be done for both sides of your body.  
a) Remove (1) Allen Bolt and (1) Washer from Carriage Tube.  
b) Push Locking Arm up, insert Carriage Tube into Seat Carriage and release Locking Arm.  
This will hold Carriage Tube in place. The rear of the Carriage Tube has only one hole and  
should face down.  
c) Remove (3) Allen Bolts and (3) Washers from Frame.  
d) Attach Pulse Wire from Frame to Long Extension Pulse Wire in Carriage Tube.  
e) Slide Carriage Tube over end of Frame and fasten with hardware removed in Step c.  
DO NOT pinch Wires.  
f) Attach Carriage Tube to Support Tube with hardware removed in Step a.  
1. Quadriceps Stretch  
Secure M8 Acorn Nuts on Rear Foot Tube. Tighten all nuts upon completion of this step.  
Stand close to a wall, chair or other solid object. Use one hand  
to assist your balance. Bend the opposite knee and lift your heel  
towards your buttocks. Reach back and grasp the top of your  
foot with the same side hand. Keeping your inner thighs close  
together, slowly pull your foot towards your buttocks until you  
feel a gentle stretch in the front of your thigh.You do not have  
to touch your buttocks with your heel. Stop pulling when you  
feel the stretch. Keep your kneecap pointing straight down and  
keep your knees close together. (Do not let the lifted knee swing  
outward.)  
M8 x 15mm  
allen  
seat  
carriage  
bolts  
long extension  
pulse wire  
Hold the stretch for 20 to 30 seconds. Repeat for the other leg.  
carriage  
tube  
M8 washers  
2. Calf and Achilles Stretch  
Stand approximately one arms length away from a wall or chair  
with your feet hip-width apart. Keeping your toes pointed for-  
ward, move one leg in close to the chair while extending the  
other leg behind you. Bending the leg closest to the chair and  
keeping the other leg straight, place your hands on the chair.  
Keep the heel of the back leg on the ground and move your  
hips forward. Slowly lean forward from the ankle, keeping your  
back leg straight until you feel a stretch in your calf muscles.  
pulse  
wire  
frame  
locking arm  
support  
tube  
Hold for 20 to 30 seconds. Repeat for the opposite leg.  
M8 washer  
3. Overhead/Triceps Stretch  
Stand with your feet shoulder width apart and your knees slightly  
bent. Lift one arm overhead and bend your elbow, reaching  
down behind your head with your hand toward the opposite  
shoulder blade. Walk your fingertips down your back as far as  
you can. Hold this position. Reach up with your opposite hand  
and grasp your flexed elbow. Gently assist the stretch by pulling  
on the elbow.  
M8 acorn  
nut  
M8 x 15mm  
allen bolt  
Hold for 20 to 30 seconds. Repeat for the opposite arm.  
(continued on next page)  
Figure 3 - Assemble Seat Carriage  
6
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HEART RATE TARGET ZONE  
FOR CARDIOVASCULAR FITNESS  
back  
rest  
STEP 4 – Seat & Back Rest Assembly  
seat  
carriage  
a) Attach Seat and Back Rest to Seat Carriage  
seat  
with (8) Phillips Bolts and (8) Washers.  
TABLE 1  
200  
M6 washer  
M6 x 15mm  
195  
190  
161  
133  
phillips bolts  
190  
180  
170  
185  
157  
129  
M6 x 15mm  
phillips bolts  
IMPORTANT  
LOCKING ARM MUST be locked  
tightly before you sit on the SEAT.  
180  
153  
129  
locking  
arm  
M6 washers  
175  
148  
M6  
washers  
170  
144  
119  
M6 x 15mm  
phillips bolts  
165  
136  
165  
160  
136  
112  
Heart  
160  
150  
140  
130  
120  
110  
100  
Figure 4 - Assemble Seat and Back Rest  
Rate  
(Beats/  
Min)  
155  
131  
108  
150  
145  
140  
Maximum  
Attainable  
Heart Rate  
seat carriage  
140  
115  
STEP 5 – Rear Handlebar Assembly  
rear  
handlebar  
a) Attach Rear Handlebar to Seat Carriage with  
127  
105  
(2) Allen Bolts, (2) Washers, and (2) Nylon Nuts.  
123  
119  
129  
85%  
Target  
Zone  
b) Attach Handlebar Pulse Wires to Long  
M8 nylon  
nuts  
Extension Pulse Wires.  
M8 washers  
101  
98  
handlebar  
pulse wires  
70%  
Target  
Zone  
M8 x 45mm  
allen  
bolts  
20 25 30 35 40 45 50 55 60 65 70 75 80  
AGE (YRS)  
long extension  
pulse wire  
Figure 5 - Install Rear Handlebar  
TABLE 2  
left  
left  
strap  
crank  
STEP 6 – Pedal Assembly  
Exercise  
Week  
Warm Up  
Period  
THR%  
Minutes  
Cool Down  
Period  
Total  
Time  
Sessions  
Per Wk.  
Total Time  
Per Wk.  
The Foot Pedals, Shafts, Cranks and Foot Straps are marked  
“R” for Right and “L” for Left.  
&1 & 2  
&3 & 4  
&5 & 6  
&7 & 8  
& 9 & 10  
&11 & 12  
5 min  
5 min  
5 min  
5 min  
5 min  
5 min  
60-65% -8  
65-70% -10  
70-75% -15  
70-80% -20  
70-85% -25  
70-85% -25  
5 min  
5 min  
5 min  
5 min  
5 min  
5 min  
17 min  
20 min  
25 min  
30 min  
35 min  
35 min  
3
3
3
3
3
3
51 min  
60 min  
75 min  
90 min  
105 min  
105 min  
a) Insert Shaft of Left Foot Pedal into threaded hole in Left  
left foot  
pedal  
Crank, see Figure 6.  
b) Turn Shaft by hand counter-clockwise until snug.  
NOTE: DO NOT turn the Shaft clockwise, doing so will strip  
the threads. Tighten Shaft with Multi-Hex Tool provided.  
L” & R”  
markings are  
located on the  
ends of the  
c) Insert Shaft of Right Foot Pedal into threaded hole  
left side shown  
looking from the  
back of the unit.  
pedal shaft.  
in Right Crank.  
d) Turn Shaft by hand clockwise until snug. Tighten with  
Multi-Hex Tool provided.  
Figure 6 - Pedal Assembly  
e) Install Left and Right Foot Straps on Foot Pedals as  
shown, see Figure 6.  
18  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
extension  
wire  
short extension  
pulse wires  
STEP 7 – Computer Tube Assembly  
cardiovascular effect. Note: Although 70% was  
used in this example, the heart rate range needed  
to achieve results falls between 60% and 85% of  
your maximum heart rate.  
CLOTHING  
All exercise clothing should be loose-fitting to  
permit freedom of movement, and should make  
the wearer feel comfortable and self-assured.  
a) Remove (3) Allen Bolts and (3) Washers  
from Frame.  
computer  
tube  
b) Connect Extension Wire and Short  
Extension Pulse Wire to Reed Switch  
Wire, Gear Box Wire and Pulse Wire.  
If you are just beginning your exercise program,  
your target heart rate range should be roughly at  
60% of your maximum heart rate. As you become  
more conditioned (or if you are already in good  
cardiovascular shape) you can increase your  
target heart rate to 70%-85% of your maximum  
heart rate. Remember, your target heart rate is  
only a guide.  
Never wear rubberized or plastic clothing, such  
garments interfere with the evaporation of  
perspiration and can cause body temperature  
to rise to dangerous levels.  
M8 x 15mm  
allen bolts  
c) Slide Computer Tube over Wires and  
into Frame. Fasten with hardware  
removed in Step a.  
M8 x 15mm  
allen bolt  
extension  
wires  
M8  
washer  
We recommend wearing a workout shoe with a  
rubberized sole unless instructed otherwise.  
NOTE: DO NOT pinch wires while  
attaching Handlebar Tube.  
M8 washers  
When checking heart rate during a workout, take  
your pulse within five seconds after interrupting  
exercise because it starts to go down once you  
stop moving. Count pulse for 10 seconds and  
multiply by six to get the per-minute rate.  
TIPS TO KEEP YOU GOING  
M8 x 15mm  
allen bolt  
short extension  
pulse wire  
1) Adopt a specific plan and write it down.  
2) Keep setting realistic goals as you go along,  
pulse wire  
and remind yourself of them often.  
reed switch  
wire (middle wire)  
3) Keep a log to record your progress and make  
Remember, your Recumbent Bike also comes with  
pulse sensors located on the Rear Handlebar.  
frame  
gear box wire  
sure to keep it up-to-date. See pages 22 - 24.  
4) Include weight and/or percent body fat  
measures in your log. Extra pounds can  
easily creep back.  
When used properly, the unit pulse sensors  
can help you to determine your estimated  
heart rate. To do so:  
Figure 7 - Install Computer Tube  
5) Upgrade your fitness program as you progress.  
Your Edge 491r provides 12 different workout  
programs to keep your workouts challenging.  
a) Push the START button on your Computer.  
STEP 8 – Front Handlebar and  
Computer Assembly  
b) Gently grab both metal pulse sensors on  
computer  
book  
holder  
both handlebars. Wait 6 seconds.  
6) Enlist the support and company of your family  
c) Your estimated heart rate range will be  
displayed on screen. Check the chart on the  
following page to see if you are within your  
range according to your age.  
a) Attach Front Handlebar, to Computer  
Tube with (2) Allen Bolts, (2) Washers and  
(2) Nylon Nuts.  
and friends.  
7) Update others on your successes.  
slot  
extension  
8) Avoid injuries by pacing yourself and including  
a warm up and cool down period as part of  
every workout. See page 16.  
short extension  
pulse wires  
NOTE: DO NOT use rechargeable batteries,  
Using rechargeable batteries will cause a  
short circuit and destroy Computer.  
When used properly, the heart rate pulse  
sensors and display monitor provide a  
reasonably accurate estimate of your  
actual heart rate. This estimate is not  
exact and persons with medical conditions  
and/or a specific need for accurate heart  
rate monitoring should not rely on the  
estimations provided.  
wire  
M8 washers  
9) Reward yourself periodically for a job well done!  
M8 nylon nuts  
b) Remove Battery Door from back of  
Computer, insert four “C” size batteries  
in order shown in Figure 9 below and  
replace Battery Door.  
M8 x 45mm  
allen bolts  
c) Remove (4) Phillips Screws from back of  
Computer. Carefully plug Extension  
Wire and Short Extension Pulse Wires  
into back of Computer.  
M5 x 10mm  
phillips  
screws  
By using the chart on the following page you can  
see where your heart rate falls in the minimum and  
maximum target zones.  
front handlebar  
computer tube  
d) Attach Computer to Computer Tube  
The above are guidelines, people with any medical  
limitations should discuss this formula with their  
physician.  
with Phillips Screws.  
e) Snap Book Holder into slot in Computer.  
Figure 8- Install Front Handlebar and Computer  
four “C” batteries  
battery  
door  
4
1
3
2
computer  
8
17  
Figure 9- Install Batteries  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a certain degree on your age, and is determined  
by measuring your heart rate in beats per minute.  
Refer to the “Measuring Your Heart Rate” section  
below and on page 17 for more information on  
how to determine and measure your heart rate.  
described previously. Each workout should begin  
with a warm up and end with a cool down. As a  
general rule, space your workouts throughout  
the week and avoid consecutive days of  
hard exercise.  
(CH)  
EDGE 491r PARTS LIST  
ITEM  
PARTS NAME  
QTY.  
ITEM  
PARTS NAME  
QTY.  
You can do different types of aerobic activities,  
say walking one day, and use your bike the next.  
Make sure you choose an activity that can be  
done regularly, and is enjoyable for you. The  
important thing to remember is not to skip too  
many days between workouts or fitness benefits  
will be lost. If you must lose a few days, gradually  
work back into your routine.  
Here are the amounts of activity necessary for the  
average healthy person to maintain a minimum  
level of overall fitness. Included are some of the  
popular exercises for each category.  
EXBC00491  
EXBC491-01  
EXBC491-02  
EXBC491-04  
EXBC491-05  
EXBC491-07  
EXBC491-08  
EXBC491-09  
EXBC491-10  
EXBC491-11  
EXBC491-12  
EXBC491-13  
EXBC491-14  
EXBC491-15  
EXBC491-18  
EXBC491-19  
EXBC491-20  
EXBC491-21  
EXBC491-22  
EXBC491-23  
EXBC491-24  
EXBC491-25  
EXBC491-26  
EXBC491-27  
EXBC491-28  
EXBC491-29  
EXBC491-30  
EXBC491-31  
EXBC491-33  
EXBC491-34  
EXBC491-35  
EXBC491-37  
EXBC491-38  
EXBC491-39  
EXBC491-40  
EXBC491-41  
EXBC491-42  
Retail Unit  
1
2
1
16  
4
2
1
1
1
1
1
1
8
12  
1
1
2
1
1
1
8
1
1
8
8
1
2
5
2
1
1
1
1
1
1
1
2
EXBC491-43  
EXBC491-44  
EXBC491-45  
EXBC491-46  
EXBC491-48  
EXBC491-49  
EXBC491-53  
EXBC491-54  
EXBC491-55  
EXBC491-65  
EXBC491-67  
EXBC491-68  
EXBC491-69  
EXBC491-70  
EXBC491-71  
EXBC491-72  
EXBC491-73  
EXBC491-74  
EXBC491-76  
EXBC491-78  
EXBC491-79  
EXBC491-80  
EXBC491-81  
EXBC491-82  
EXBC491-83  
EXBC491-84  
EXBC491-86  
EXBC491-87  
EXBC491-SD  
EXBC491-OM  
EXBC491-MC  
EXBC491-HK  
EXBC491-K1  
EXBC491-K2  
M5 x 10mm Phillips Screw (43)  
Book Holder (44)  
M5 x 50mm Phillips Screw (45)  
Spring (46)  
M10 Washer (48)  
M10 Acorn Nut (49)  
4
1
10  
1
2
2
1
1
1
1
2
2
2
2
2
2
2
1
1
2
2
1
1
2
1
4
1
1
2
1
1
1
1
M8 x 65mm Carriage Bolt (01)  
Front Foot Tube (02)  
M8 Washer (04)  
M8 Acorn Nut (05)  
End Cap (07)  
WARM UP 5-10 minutes of exercise such as  
walking, slow jogging, knee lifts, arm circles or  
trunk rotations. Low intensity movements that  
simulate movements to be used in the activity  
can also be included in the warm up.  
Rear Foot Tube (08)  
Support Tube (09)  
Mag Brake (53)  
Belt Tension Bracket (54)  
M8 x 20mm Phillips Bolt (55)  
Gear Box w/Wire (65, 66)  
M6 x 40mm Eyebolt (67)  
Adjustment Channel (68)  
M3 x 8mm Phillips Screw (69)  
Front Handlebar Grip (70)  
Pulse Sensor w/Wire (71, 78)  
M6 Hex Nut (Black) (72)  
M6 Hex Nut (73)  
M6 x 65mm Eyebolt (74)  
Short Extension Pulse Wire (76)  
Handlebar Pulse Wire (78)  
M5 x 10mm Phillips Screw (79)  
Pulse Wire (80)  
Long Extension Pulse Wire (81)  
M8 x 55mm Carriage Bolt (82)  
Wire Plug (83)  
M3 x 15mm Phillips Screw (84)  
Right Pedal Strap (86)  
Left Pedal Strap (87)  
Shroud Decals  
Owner’s Manual  
Master Carton  
Hardware Kit  
WHEN TO EXERCISE  
Right Rear Cover (10)  
Left Rear Cover (11)  
Right Front Cover (12)  
Left Front Cover (13)  
M4 x 12mm Phillips Screw (14)  
M4 x 16mm Phillips Screw (15)  
Seat Carriage Plug (18)  
Seat Carriage (19)  
Seat Carriage Bushing (19)  
Locking Arm Grip (21)  
Plug (22)  
Carriage Tube (23)  
M8 x 15mm Allen Bolt (24)  
Seat (25)  
Backrest (26)  
M6 x 15mm Phillips Bolt (27)  
M6 Washer (28)  
MUSCULAR STRENGTH – a minimum of two, 20  
minute sessions per week that include exercises for  
all the major muscle groups. Lifting weights is the  
most effective way to increase strength.  
The hour just before the evening meal is a popular  
time for exercise. The late afternoon workout  
provides a welcome change of pace at the  
end of the work day and helps dissolve the day's  
worries and tensions.  
MUSCULAR ENDURANCE – at least three, 30 minute  
sessions each week that include exercises such as  
calisthenics, push ups, sit ups, pull ups, and weight  
training for all the major muscle groups.  
Another popular time to work out is early morning,  
before the work day begins. Advocates of the early  
start say it makes them more alert and energetic  
on the job.  
CARDIORESPIRATORY ENDURANCE – at least  
three, 20 minute workouts of continuous aerobic  
exercise each week. Working out on your bike is  
a good way to obtain this aerobic activity. Other  
popular aerobic conditioning activities include  
brisk walking, jogging, swimming, elliptical exercise,  
rope jumping, rowing, cross-country skiing, and  
some continuous action games like racquetball  
and handball.  
Among the factors you should consider in  
developing your workout schedule are personal  
preference, job and family responsibilities,  
availability of exercise facilities and weather. It's  
important to schedule your workouts for a time  
when there is little chance that you will have to  
cancel or interrupt them because of other  
demands on your time.  
Rear Handlebar w/Grips (29, 32)  
M8 x 45mm Allen Bolt (30)  
M8 Nylon Nut (31)  
Front Handlebar Plug (33)  
Right Pedal (34)  
You should not exercise strenuously during  
extremely hot, humid weather or within two  
hours after eating. Heat and/or digestion both  
make heavy demands on the circulatory system,  
and in combination with exercise can be an  
over-taxing double load.  
FLEXIBILITY – 10 -12 minutes of daily stretching  
exercises performed slowly, without a bouncing  
motion. This can be included after a warm up or  
during a cool down. Refer to pages 19 and 20  
for a list of total body stretches.  
Left Pedal (35)  
Extension Wire (37)  
Reed Switch w/Wire (38)  
Computer Tube (39)  
Computer (40)  
Front Handlebar (41)  
M8 x 60mm Allen Bolt (42)  
COOL DOWN – a minimum of 5 -10 minutes of  
slow walking or lower intensity cycling, combined  
with stretching.  
Idler Pulley Kit (04, 31, 47, 56, 57, 58, 75)  
Crank Kit  
MEASURING YOUR HEART RATE  
(see chart on page 18)  
(36, 50, 51, 52, 59, 60, 61, 62, 63, 64, 77, 85)  
1
Heart rate is widely accepted as a good method  
for measuring intensity during running, swimming,  
cycling, and other aerobic activities. Exercise that  
doesn't raise your heart rate to a certain level and  
keep it there for 20 minutes won't contribute  
significantly to cardiovascular fitness.  
AEROBIC EXERCISE:  
HOW MUCH? HOW OFTEN?  
Experts recommend that you do some form of  
aerobic exercise at least three times a week for a  
minimum of 20 continuous minutes. Of course, if  
that is too much, start with a shorter time span and  
gradually build up to the minimum. Then gradually  
progress until you are able to work aerobically for  
20-40 minutes. If you want to lose weight, you may  
want to do your aerobic workout five times a week.  
The heart rate you should maintain is called your  
Target Heart Rate. There are several ways of arriving  
at this figure. One of the simplest is: maximum heart  
rate (220 - age) x 70%. Thus, the target heart rate for  
a 40 year-old would be 126. In this example for this  
40 year old to get a cardiovascular effect the  
individual would need to keep their heart rate  
at or above 126 beats per minute to get a  
It is important to exercise at an intensity vigorous  
enough to cause your heart rate and breathing to  
increase. How hard you should exercise depends to  
16  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXERCISE GUIDELINES  
IMPORTANT  
Please review this section before you begin exercising.  
KNOWING THE BASICS  
IMPORTANT:  
Physical fitness is most easily understood by  
If you are over 35 and have been inactive  
examining its components, or "parts".  
There is widespread agreement that these  
five components comprise the basics of  
physical training:  
for several years, you should consult your  
physician, who may or may not recommend  
a graded exercise test.  
If you are just beginning your exercise program,  
your target heart rate range should be roughly at  
60% of your maximum heart rate. As you become  
more conditioned (or if you are already in good  
cardiovascular shape) you can increase your  
target heart rate to 70%-85% of your maximum  
heart rate. Remember, your target heart rate is  
only a guide.  
CARDIORESPIRATORY ENDURANCE – the ability  
to deliver oxygen and nutrients to tissues, and to  
remove wastes, over sustained periods of time.  
Using your bike will improve this.  
MUSCULAR STRENGTH – the ability of a muscle to  
exert force for a brief period of time. Upper-body  
strength, for example, can be measured by various  
weight-lifting exercises.  
You should also consult your physician if you  
have the following:  
MUSCULAR ENDURANCE – the ability of a muscle,  
or a group of muscles, to sustain repeated contrac-  
tions or to continue applying force against a fixed  
object. Push-ups are often used to test endurance  
of arm and shoulder muscles.  
• High blood pressure  
• High cholesterol  
• Asthma  
• Heart trouble  
FLEXIBILITY – the ability to move joints and use  
muscles through their full range of motion. The sit-  
and-reach test is a good measure of flexibility of  
the lower back and backs of the upper legs.  
• Family history of early stroke or  
heart attack deaths  
• Frequent dizzy spells  
• Extreme breathlessness after mild exertion  
• Arthritis or other bone problems  
BODY COMPOSITION – often considered a com-  
ponent of fitness. It refers to the makeup of the  
body in terms of lean mass (muscle, bone, vital  
tissue and organs) and fat mass. An optimal ratio of  
fat to lean mass is an indication of fitness, and the  
right types of exercises will help you decrease body  
fat and increase or maintain muscle mass. To help  
track your progress we have provided Workout  
Progress Charts on pages 22 and 23.  
• Severe muscular, ligament or  
tendon problems  
• Other known or suspected disease  
• If you experience any pain or tightness  
in your chest, an irregular heartbeat or  
shortness of breath, stop exercising  
immediately. Consult your physician  
before continuing.  
A COMPLETE EXERCISE PROGRAM  
• Pregnant  
• Balance impairment  
How often, how long and how hard you exercise,  
and what kinds of exercises you do should be  
determined by what you are trying to accomplish.  
Your goals, your present fitness level, age, health,  
skills, interest and convenience are among the  
factors you should consider. For example, an  
athlete training for high-level competition would  
follow a different program than a person whose  
goals are good health and the ability to meet  
work and recreational needs.  
• Taking medications that affect heart rate  
Your exercise program should include something  
from each of the four basic fitness components  
(continued on next page)  
10  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program Graphics  
GETTING STARTED  
PROGRAM 9  
PROGRAM 1  
PROGRAM 2  
PROGRAM 3  
PROGRAM 4  
PROGRAM 5  
Once your Recumbent Bike is assembled, make sure that your workout space has a solid, level surface with  
plenty of space around it. We recommend placing a mat under your bike to protect your flooring.  
MANUAL  
ROLLING  
RAMP  
INTERVALS  
MOUNTAIN  
Correct Workout Position  
When exercising, keep your back straight and your head in a neutral position to minimize neck and upper  
back strain. When pedaling do not lock out your knees, at the bottom of the pedaling motion there should  
be a slight bend in the knee. Always try to pedal the bike with a smooth and rhythmic motion.  
PROGRAM 6  
PROGRAM 7  
PROGRAM 8  
PROGRAM 10  
FITNESS TEST  
USING YOUR RECUMBENT BIKE  
PROGRAM 11  
The bike provides a completely smooth and natural feeling, that minimizes the impact on your hips, knees  
and ankles while providing a superior aerobic and muscle toning workout. The durable steel frame and  
transport wheels make the bike mobile and easy to use.  
VALLEY  
RANDOM  
PLATEAU  
IMPORTANT:  
• This bike is not recommended for children.  
• Always make sure that you feel balanced and secure.  
• Always use your bike on a clean, solid and level surface.  
PROGRAM 12  
FAT BURN  
USING THE PULSE FUNCTION ON THE REAR HANDLEBAR  
The pulse window on your Computer works in conjunction with the pulse sensors found  
on the rear handlebar. When you are ready to read your pulse:  
AGE: The AGE function is only adaptable to  
PROGRAM 11 or 12. After setting the TIME in  
PROGRAM 11 or 12 the AGE function will  
automatically come on the screen.  
The PULSE rate will be displayed after 4 stable pulse  
signals have been detected. Each pulse signal will  
be accompanied by a symbol flash.  
1) Place both hands firmly on the pulse sensors.  
For the most accurate reading, it is important  
pulse  
sensors  
If there is no pulse input detected for over 8  
seconds, the computer will turn off the pulse  
circuit automatically. Press ENTER button during  
your workout to restart PULSE function.  
to use both hands.  
Press the UP or the DOWN button to input  
your age. The digit will be flashing.  
2) Look at your pulse window. The small heart  
will begin to blink.  
Press ENTER to go to another function or START  
to begin exercising.  
3) Your estimated heart rate will appear in the  
window approximately 6 seconds after you  
grasp the pulse sensors.  
LCD Contrast Calibration  
If you do not set an age, this function will always  
default to age 25.  
The contrast of the screen can be adjusted by  
the following steps. During the STOP mode press  
and hold the ENTER and UP buttons together  
for over 2 seconds. This will open the LCD contrast  
calibration mode. Then press the UP or the  
DOWN buttons to adjust the contrast of the  
screen. Press START/STOP button to set the desired  
level of contrast. There are 16 levels of contrast.  
rear  
handlebar  
4) Refer to the Target Heart Rate Zone Chart  
found on page 18 of this manual. For additional  
information about the importance of working  
within certain heart rate ranges, see pages  
16 and 17 – Measuring Your Heart Rate.  
SCAN: During your workout, press MODE until the  
arrow is blinking in front of TIME, then scan is set.  
NOTE: It will scan automatically if the time is not set.  
PULSE: Press the MODE button until the arrow points  
to the PULSE function. This will display your current  
estimated heartbeat at a rate in beats per minute.  
5) This estimate is not exact and persons with  
medical conditions and/or a specific need  
for accurate heart rate monitoring should  
not rely on the estimations provided.  
14  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important: Be sure to set your actual age when  
using these programs.  
Graphic LCD Display Description and  
Function (LARGE window)  
OPERATING THE COMPUTER  
This system offers 12 programs that you can  
preset the workout time and will divide the  
time by 10 intervals. If you do not preset the  
workout time the system will count up the  
workout time in one-second increments.  
Program 11: is designed to allow you to work  
out at 60% of maximum heart rate  
(Target Heart Rate)  
WARNING  
The batteries must be installed as instructed  
on page 8. Do not carry batteries loosely,  
such as in a purse or pocket. The batteries  
may explode or leak and cause injury if  
installed improperly, misused, disposed  
of in a fire or recharged.  
Program 12: is designed to allow you to work  
out at 85% of maximum heart rate  
(Target Heart Rate)  
Programs 1-10:  
See Program Graphics on page 14.  
Operating Instructions for  
Programs 11 and 12  
STEP 1 – Begin by pressing the START/STOP button  
for over 2 seconds. This will clear any other  
chosen function.  
STEP 1 Press START/STOP button 2 seconds to clear  
out previous program.  
STEP 2 – Next press the UP or DOWN button  
to scroll to the desired exercise program. Then  
press ENTER. The program will be displayed on  
the LCD window.  
STEP 2 Press the UP or the DOWN button to  
choose the desired Heart Rate Program  
(PROGRAM 11 or 12).  
Introduction  
Your unit is equipped with a programmable  
computer to help you track your progress and  
motivate you to reach your fitness goals.  
Note: This unit is not recommended for children.  
If you do not set an age, this function will always  
default to age 30.  
STEP 3 Press ENTER for TIME mode. Press the UP  
or the UP button for the desired TIME set-  
ting.  
STEP 3 – The TIME setting mode should now be  
displayed. Press the UP or DOWN button  
to set the desired workout time.  
This computer provides different programs designed  
to tailor to your fitness goals. Simply choose the  
program you like, set the time limit and begin  
exercising.Your monitor will then show your  
approximate pulse, approximate calories burned,  
elapsed time, speed and distance traveled.  
PULSE (approximate): Your computer displays your  
pulse rate in beats per minute during your workout.  
STEP 4 Press ENTER for AGE mode. Press the  
UP or the DOWN button for the  
desired AGE setting.  
STEP 4 – Press the START button to begin exercising.  
(If you want to exit the Program, press the ENTER  
button for 2 seconds and the display will reset.  
Once you begin exercising your present workout  
interval will be flashing.You can also increase or  
decrease your workout resistance by pressing the  
UP or the DOWN button. To PAUSE your  
exercising program, press the STOP button, then  
to resume press the START button.  
Pulse sensors, located on the Rear Handlebar  
enable the user to read his/her pulse rate. By  
grasping the sensors and holding firmly, the display  
will read your pulse rate in the display window.Your  
pulse will continue to read as long as your hands  
stay on the pulse sensors.  
STEP 5 You are now ready to begin exercising.  
Graphic LCD Display Description and  
Function (small window)  
TIME: Press the MODE button until the arrow points  
to the TIME function. If the TIME is not set, it will  
count up in one-second intervals up to 99.59.  
Functions and Features  
TIME: Shows your elapsed workout time in minutes  
and seconds.Your computer will automatically count  
up from 0:00 to 99:59 in one second intervals.You may  
also program your computer to count down from a  
set value by using the UP and DOWN buttons. If  
you continue exercising once the time has reached  
0:00, the computer will begin beeping, and reset itself  
to the original time set, letting you know your  
workout is done.  
When used properly, the heart rate pulse  
sensors and display monitor provide a  
reasonably accurate estimate of your actual  
heart rate. This estimate is not exact and  
persons with medical conditions and/or a  
specific need for accurate heart rate monitoring  
should not rely on the estimations provided.  
Programs 11 and 12:  
To set the desired time:  
These unique programs allow the monitor to adjust  
the workout resistance according to your heart rate  
automatically. Grasp the pulse sensors and hold  
with a firm grip. If the current Heart Rate is greater  
than the Target Heart Rate, the computer will  
decrease the workout resistance automatically. If  
your current Heart Rate is less than your Target  
Heart Rate it will increase your resistance. By the  
resistance changing, the machine will be able  
to keep your heart rate at its target beats  
per minute.  
STEP 1 Press the ENTER button to enter the TIME  
setting function.  
Press the UP or DOWN button to  
choose your desired workout time.  
Range – 5:00-99:00.  
Buttons and Definitions  
MODE: This button selects functions of TIME, SPEED,  
DISTANCE, CALORIES, AGE, TARGET HEART RATE,  
and PULSE.  
SPEED: Displays your workout speed in miles per hour.  
DISTANCE: Displays the accumulative distance  
traveled during each workout up to a maximum  
of 99.9 miles. The distance will be displayed in tenths  
of a mile.  
STEP 2 Press START to begin. After workout time  
is completed the computer will beep for 12  
seconds. To stop beeping press any button.  
ENTER: This button allows users to set the chosen  
mode for exercising. (During the STOP mode, press  
the ENTER button to enter the TIME or AGE setting).  
SPEED: Press the MODE button until the arrow  
points to SPEED. This will display your current  
speed. The display value will be updated every  
2-3 seconds.  
CALORIES (approximate): Your computer will estimate  
the cumulative calories burned at any given time  
during your workout. Calorie expenditure on your  
computer is based on realistic expectations; however,  
your computer is not individually programmable for  
all necessary variables to accurately monitor actual  
calories burned.  
When used properly, the heart rate pulse  
sensors and display monitor provide a reason-  
ably accurate estimate of your actual heart  
rate. This estimate is not exact and persons with  
medical conditions and/or a specific need for  
accurate heart rate monitoring should not rely  
on the estimations provided.  
START/STOP: This button allows the user to STOP  
or START exercising. (By holding this button for 2  
seconds the user can reset all values to “0”). The  
monitor will turn off automatically after approxi-  
mately 4.5 minutes of non use. All values will then  
be reset to “0.  
DISTANCE: Press the MODE button until the arrow  
points to the DISTANCE function.  
CALORIE: Press the MODE button until the arrow  
points to the CALORIE function.  
The computer will count up in 0.1 increments. After the  
display value reaches 999, it will reset to “0” and begin  
counting from 0.1 again.  
The computer will count up in 0.1 increments. After  
the display value reaches 999, it will reset to “0” and  
begin counting from 0.1 again.  
UP BUTTON: This button allows the user to increase  
the values of the TENSION LEVEL, TIME, and AGE.  
Important: You must keep your hands on the  
pulse sensors throughout the entire workout  
when using Programs 11 and 12.  
AGE: Your computer is age-programmable from  
1 to 99 years when you choose Program 11 or  
Program 12. The default age is 25 years.  
DOWN BUTTON: This button allows the user to  
decrease the values of the TENSION LEVEL, TIME,  
and AGE.  
13  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Security Camera C1457M C User Manual
Pentair Swimming Pool Vacuum Side Pool Cleaner User Manual
Philips Cell Phone 26PW9100D User Manual
Philips Charcoal Grill CBC608A User Manual
Philips Electric Toothbrush HX6023 User Manual
Philips TV Antenna SDV7120 User Manual
Philips Work Light P 2220 E User Manual
Planet Technology Switch WGSD 1020 User Manual
Poulan Chainsaw 545001484 User Manual
ProForm Home Gym PFEL19010 User Manual