2504.4 en 13-12-2006 08:29 Pagina 1
About this User Manual
EN
This manual contains all information you will need to initially install and operate your new TV.
Also read the help texts which are being displayed at the bottom of the screen.
If this instruction manual does not give an answer or if ‘Troubleshooting’ does not solve yourTV
problem, you can call your Local Philips Customer or Service Centre. See the suppliedWorldwide
guarantee booklet.
Please, have the Model and Product number which you can find at the back or the bottom of your television
set or on the packaging, ready, before calling the Philips customer support service.
Model: 37-42PF9731D/10; 42PF9831D/10
Product No: ....................................
Contents
Safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . 3
To make video and audio connections . . . . . . 46
Side panel overview . . . . . . . . . . . . . . . . . 47
Rear panel overview . . . . . . . . . . . . . . . . . 48
Use of the remote control RC4401/4420/01 . . 5
Use of the option key . . . . . . . . . . . . . . . . . . . . 8
Keys at the right side of the TV . . . . . . . . . . . . 8
Connect
aVCR or DVD recorder . . . . . . . . . . . . . . 49
twoVCRs orVCR and DVD recorder . . . 50
a satellite receiver . . . . . . . . . . . . . . . . . . 50
a DVD player, HD receiver
or game console . . . . . . . . . . . . . . . . . .. 51
a DVD player or HD receiver . . . . . . . . . . 51
a DVD player, a satellite or HD receiver . .52
a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
a Home Cinema amplifier . . . . . . . . . . . . . 54
Introduction: Digital TV . . . . . . . . . . . . . . . . . . . 9
Switch the TV on . . . . . . . . . . . . . . . . . . . . . . . 9
First time installation . . . . . . . . . . . . . . . . . . . . 9
How to navigate through the menus . . . . . . . . 12
Use of the TV menu settings . . . . . . . . . . . . . . 14
Adjust picture menu settings . . . . . . . . . . 16
Adjust sound menu settings . . . . . . . . . . . 19
Enjoy Ambilight . . . . . . . . . . . . . . . . . . . . . 21
Adjust feature menu settings . . . . . . . . . . 24
How to search for and store TV channels . 28
Rearrange the channel number list . . . . . . 31
Manual network installation . . . . . . . . . . . 32
Set your preferences . . . . . . . . . . . . . . . . 32
Select your connections . . . . . . . . . . . . . . 33
Select a Decoder channel number . . . . . . 34
Reset the Factory settings . . . . . . . . . . . . 34
How to upgrade the TV software . . . . . . 35
Use the Common Interface slot . . . . . . . . . . . 55
Select connected equipment . . . . . . . . . . . . . . 56
Record with your recorder . . . . . . . . . . . . . . 56
Audio- and video equipment keys . . . . . . . . . . 57
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 58
Annex 1 - Philips TV software upgrade with
portable memory . . . . . . . . . . . . . . . . . . . 60
Annex 2 - Philips TV-Slideshow Format with
background music . . . . . . . . . . . . . . . . . . . 63
Annex 3 - Philips TV - Portable memory
and USB issues . . . . . . . . . . . . . . . . . . . . . 65
Create your favourite list . . . . . . . . . . . . . . . . 36
EPG (Electronic Programme Guide) . . . . . . . . 37 Annex 4 - Issues referring to connected
Multimedia Browser . . . . . . . . . . . . . . . . . . . . 39
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
peripherals with a HDMI connector . . . . . 66
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Product information . . . . . . . . . . . . . . . . . . . . 68
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 3
Getting started
EN
Before you start
Warning: do not insert the mains cord into the mains at the bottom of the TV and in a wall socket
or hang the TV on the wall before all connections are made.
Before you switch on your TV, connect all your peripheral equipment. See To make video and audio
connections, p. 46.
Overview of the rear connector panel
There is a wide range of audio and video equipment that can be connected to your TV. See To make
audio and video connections, p. 46.
AUDIO OUT
AUDIO OUT
DISPLAY SYNCHRONIZED
AUDIO OUT
AUDIO OUT
DIGITAL
DISPLAY SYNCHRONIZED
AUDIO
OUT
AUDIO
L
DIGITAL
AUDIO
OUT
R
R
R
L
AUDIO
OUT
OUT
DIGITAL
AUDIO
IN
DIGITAL
AUDIO
IN
R
L
AUDIO
IN
Y
Pb
Pr
HDTV
&
Progressive
480p, 576p, 720p, 1080i
EXT3
EXT3
COMMON INTERFACE
COMMON INTERFACE
ETHERNET
HDMI
AUDIO in L/R VGA
ANTENNA
EXT2
EXT2
EXT1
EXT1
DIGITAL
AUDIO
L
AUDIO
IN
DIGITAL
AUDIO
IN
o
o
o
o
o
o
ETHERNET
HDMI
1
HDMI
2
AUDIO IN L/R
PC-VGA
ANTENNA
75
IN
Y
Pb
Pr
COMMON INTERFACE
ETHERNET
HDTV & Progressive
480p, 576p, 720p, 1080i
EXT3
EXT3
o
COMMON INTERFACE
ETHERNET
HDMI
AUDIO in L/R VGA
ANTENNA
EXT2
EXT1
o
o
o
o
o
HDMI 1
HDMI 2
AUDIO IN L/R
PC-VGA
ANTENNA
75
EXT2
EXT1
EXT1 can handle CVBS, RGB and Audio L/R;
EXT2 can handle CVBS, S-VIDEO, RGB,Audio L/R;
EXT3 can handleYPbPr and Audio L/R;
HDMI 1 and 2.
VGA can handleVGA, SVGA, XGA and 480p, 576p, 1080i and Audio L/R
Supported video formats: 480i, 480p, 576i, 576p, 720p, 1080i.
Warning: disconnect all power sources before making any connections.
Tip: it is preferable to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a
better picture quality.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 4
Getting started (Continued)
EN
Overview of the side connector panel
- To connect a camera, camcorder or game, see To make video
and audio connections, p. 47.
- To connect a headphone, see To make video and audio
connections, p. 47.
- To connect a USB device or memory card, see Multimedia
browser, p. 39.
Connect the antenna
<
Insert the aerial plug firmly into the aerial socket x at the
bottom of the TV.
Tip: for best quality use the suppressor cable supplied.
Connect the mains
<
Insert the mains cord supplied into the mains at the bottom
of the TV and in the wall socket.
Warning: verify that the mains supply voltage corresponds
to the voltage printed on the sticker at the rear of the TV.
UK - EIRE
Remote control
<
Insert the 2 batteries supplied (Type R6-1,5V).
Be sure the (+) and (-) ends of the batteries line up
correctly (inside of case is marked.)
For most keys pressing a key once will activate the function.
Pressing a second time will de-activate it.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 5
Use of the remote control RC4401/01 - RC4420/01
EN
B Standby
Press to switch the TV from or to standby mode.
When switched to standby, a red indicator on the TV lights up.
Attention: the TV is never powered off completely unless
it is physically unplugged.
TV Press to select TV mode.
DVD STB VCR AUX
Press one of these keys to set your remote control to
operate a peripheral device.
See Audio andVideo equipment keys, p. 57.
DEMO Press to switch the Demo menu on or off.
a
Colour keys
- When functions are attached to the colour keys, the
colour keys are shown on screen.
- To select a page in Teletext mode.
OPTION
- To open and close the Quick access menu which contains
a few frequently used options, like Picture format.
- When in teletext, press repeatedly to enlarge the teletext
page display. See Teletext, p. 44.
aTo open and close the Electronic Programme Guide.
See EPG (Electronic Programme Guide), p. 37.
Cursor keys
Press the cursor keys up/down, left/right to navigate
through the menus.
OK - To activate a setting;
- Starts playing content in the Multimedia Browser
application.
v
BROWSE/MENU:
To open and close the main menu. See How to navigate
through the menus, p. 12.
bTeletext On/Off
Press to switch teletext on. See Teletext, p. 43.
Only for UK: Digital text/Interactive services.
Attention: not all channels transmit interactive television
applications at all times.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 6
Use of the remote control RC4401/01 - RC4420/01 (Continued)
EN
V Volume
Press + or - to adjust the volume.
¬ Mute key: interrupt the sound or restore it.
+P- Channel selection
- to browse through the TV channels and sources stored
and marked in the Favourite channels lists;
- to select a page in Teletext mode;
- to quickly browse through the lists in the menus;
- to switch the TV on from standby mode.
0/9 Digit keys
a
To select a TV channel between 0 and 999.
AV Select your peripherals
See Installation menu, Select your connections, p. 33.
0 Previous channel
Press to alternate between the currently viewed and the
previously viewed TV channel.
Ambilight - MODE
Ambilihgt: press to switch Ambilight On or Off. For the
Ambilight settings, see Use of the TV menu settings, Enjoy
Ambilight, p. 21.
MODE: press this key repeatedly to toggle through the
Ambilight modes.
Note: when the TV is switched to standby, and you switch
Ambilight On,Ambilight will be active. Only then less
modes are available.
Ò ‡ π † Audio andVideo equipment keys
See Audio andVideo equipment keys, p. 57.
v
See Multimedia browser functional keys, p. 42.
‡ CANCEL
Only for UK: Digital text/Interactive services.
Press this key to cancel those special services (and the
function bar at the bottom of the screen).
® no function
iOn screen information
Press to display (when available) information about the
selected TV channel and programme.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 7
Use of the remote control RC4401/01 - RC4420/01 (Continued)
EN
b Dual screen/PIP
Press the b key to switch on or off Dual screen or PIP,
according to the format selection made in the PIP format
list. See p. 24.
PIP allows you to call up a subscreen within the main screen
enabling you to watch two TV channels or a TV channel and
pictures from a peripheral at the same time.
Dual screen allows you to divide the main screen into two
subscreens enabling two TV channels or a TV channel and an
external source or a combination of one of them with
Teletext (see p. 43) to be watched simultaneously.
Note: not all combinations might be possible. In such a
case a message appears on the screen.
a
1. Press the cursor left/right to highlight the PIP window or
the left/right screen in Dual screen
2. Press the -P+ key or the AV v key or the digit keys in
order to change TV channels, external sources or teletext
pages in the highlighted screen.
Note: on screen information, which appears when
changing channels, always refers to the highlighted screen.
3. Press the b key again to return to a full main screen
picture.The TV tunes to the picture which was highlighted
in the Dual screen or PIP mode.
Notes:
- Audio only plays from the main, when PIP has been
selected, or from the left screen, when Dual screen has
been selected.
- When in Dual screen, two display formats are supported:
full screen or squeezed. Multimedia browser content will
always be displayed full screen.
v
- When PIP or Dual screen mode is activated, and a TV
channel or source is locked, the picture is grayed out.
Define the position of the PIP screen
1. Press the cursor right to highlight the PIP screen.
2. Press the red colour key on the remote control to select
Position.
Note: if no action has been undertaken, the function bar
at the bottom of the screen will disappear after a few
seconds. Press any colour key to make it re-appear.
3. Use the cursor keys to define the position of the PIP
screen.
FAV To display the channels list.
You can create up to four favourite lists.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 8
Use of the OPTION key
EN
The Option key allows you to display the Quick access menu
which will give you direct access to some features and menu
options.
1. Press the OPTION key.
>
The Quick access menu appears.
2. Press the cursor up/down to select a menu item.
3. Press the OK key to jump to the selected menu item in the
TV menu. (Except for the Clock option).
4. Use the cursor keys to make a selection.
5. Press the option key to exit.
Note: digital related menu items will only be accessible in case
of digital TV broadcasting.
a
Digital audio language:
See Adjust sound menu settings, p. 19.
Digital subtitle language:
See Adjust feature menu settings, p. 24.
Subtitles:
See Adjust feature menu settings, p. 24.
Quick access
Picture format:
Digital audio language
Digital subtitle language
Subtitles
See Use of the TV menu settings,Adjust picture menu
settings, p. 18.
Equalizer:
Picture format
Equalizer
See Use of the TV menu settings,Adjust sound menu
settings, p. 19.
PIP format
Clock
Clock:
<
Select to activate/deactivate the clock display on the screen.
Keys at the right side of the TV
In case your remote is lost or broken, apart from channel
selection and volume adjustment, you can still change some
of the basic settings with the keys at the right side of your
TV.
<
Press the power switch B to switch the TV on or off.
The MENU key can be used to summon the TV menu
without the remote control.
<
Use the VOLUME - and + keys and the
PROGRAM/CHANNEL - and + keys to select menu
items.
B
VOLUME
MENU
PROGRAM/CHANNEL
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 9
Introduction: Digital TV
EN
Besides traditional analogue broadcasts, you can also receive
digital broadcasts via a roof or loft mounted digital antenna in
countries where those signals are available and which are
supported by this TV.Verify if the country you are now located
and you have selected during the installations (see further),
supports digital video broadcasting via antenna.
or consult your local dealer or see the sticker at the back of
your TV.
Note: for digital TV channels via a cable connection, you
will need an extra set top box decoder; for digital TV
channel via satellite, a satellite tuner and dish mounted
outdoors are required.Also certain internet providers
offer digital TV channels via broadband internet and a
settop box.
Switch the TV on
<
Press the power switch B at the side of the TV.
>
An indicator on the front of the TV lights up and the
screen comes on.
<
If the TV is in standby mode, press the -P+ keys or the B
key on the remote control.
Note: the first time (and only the first time) you switch
on your TV, you see a Welcome screen followed by the
installation procedure. See First time installation.
First time installation
The installation procedure consists of a series of screens that
will guide you through the installation of your TV.
Follow the instructions on screen.
Note: if the TV has already been installed before and/or you
want to change the First time installation settings, proceed
with Use of the TV menu settings, p. 14.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 10
EN
First time installation (Continued)
Step 1: select your on-screen language
After the Welcome screen you are asked to select a language of
the TV's on-screen menus.The text of the header and the info
on screen continuously change language.Also the digital audio
and subtitle language will be set to the selected menu language.
1. Press the cursor up/down to highlight your language.
2. Press the OK key on the remote control.
3. Follow the instructions on screen to proceed.
a
Step 2: complete the initial TV installation
procedure
1. Press the green colour key on your remote control when
Television is highlighted.
2. Select the country where you are now located.
Notes:
- if you select a wrong country, the channel numbering will
not be according to the standard for your country.
- in case the country selected is not DVB-T supported by
your TV, digital related menu-items will not be
accessible.
Menu language
English
Español
Français
Hrvatski
Italiano
Magyar
.............
Please select your
language.....
3. Press the green colour key on your remote control to start
the Automatic channel installation.
PHILIPS
using cursor up and
down
>
All available digital TV and radio channels and analogue
TV channels are searched for and stored automatically.
This will take a few minutes.When the search is
complete, the menu will indicate the number of digital
and analogue channels found.
Next
Notes:
- reception of digital terrestrial TV channels is applicable
dependent on the country selected;
PHILIPS Installation
- if you choose to install the channels at a later time, select
the Automatic installation in the TV menu, Installation,
Channels to scan available channels.
This will help you to install the following
sections:
Television
Settings assistant
4. Press the red colour key again when the search is
completed.
Previous
Next
Skip
Stop
PHILIPS Television
System searching: please wait..........
Digital channels found
16
22
Analogue channels found
Stop
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 11
First time installation (Continued)
EN
Step 3: Settings assistant: select your TV settings
By means of several split screens/full screens you are
prompted to select your preferred picture, sound and
ambilight settings, to finally arrive at a complete setting
which satisfies you.
PHILIPS Installation
This will help you to complete the Settings
assistant.
1. Press the green colour key on your remote control to enter
the Settings assistant menu.
2. Select your Location with the cursor up/down.
Television
Settings assistant
>
If you choose Shop it will skip the Settings assistant.
The TV parameters for picture, sound and ambilight will
then be set to predefined fixed settings.
Press the green colour key again to proceed.
If you choose Home it will display the Settings
assistant.
Previous
Next
Skip
Stop
>
PHILIPS Settings assistant
3. Use the cursor left/right to each time select your preferred
screen.
4. Press the green colour key to each time confirm your
selection and to jump to the following screen.
Please select your location before
continuing:
Home
>
The following items will be presented sequentially.
In the header it is mentioned how many screens have
been completed and how many screens there are in
total.
Shop
The Settings assistant will step sequentially through the
settings of picture, sound and ambilight.
5. Press the green colour key again to store all the settings
and to return to the TV installation menu.
Note: when you skip or stop the Settings Assistant, then
the Standard settings Philips selected for you will be
chosen.
6. Press the red colour key again to finish the First time
installation procedure and to display the first stored TV
channel.
Note: any time you can change or reset your settings or
adjust individual settings for picture, sound and ambilight in
the TV settings menu. See p. 14, Use of the TV menu
settings.
To control the settings of special TV functions, features and
accessory equipment, see p. 24, Adjust feature menu
settings.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 12
How to navigate through the menus
EN
Introduction
A lot of guiding instructions, help texts and messages will be
displayed on your TV when you use the menus or when you try
to execute an action.
Read the help texts which are being displayed on the specific
item highlighted.
The colour keys at the bottom of the screen refer to the
different actions which may be executed.
Press the corresponding colour key on the remote control to
perform the required or desired action.
Note: digital related menu items will only be accessible in case
of digital TV broadcasting.
a
1. Press the MENU/BROWSE key on the remote control.
>
The main menu appears on the screen.
- TV menu allows you to access the TV menu. See
below.
- TV channels allows you to access the TV channel list
and to create up to four favourite lists with your
preferred TV channels and digital radio stations. See
Create your favourite channel list, p. 36.
- Programme guide allows you to access detailed
information about individual digital TV programmes.
According to the type of Electronic Programme Guide,
it also allows you to access the table of scheduled
Digital TV programmes and easily select and tune to a
desired programme.
See EPG, Electronic Programme Guide, p. 37.
- Multimedia allows you to access the Multimedia
browser application. It lets you display your personal
multimedia files. Multimedia is only present when a
USB device and/or PC is connected. See Multimedia
browser, p. 39.
Television
Multimedia
TV menu
TV channels
Programme guide
Media servers
2. Use the cursor up/down to highlight and select a menu
item.
3. Use the cursor right to enter the highlighted menu item.
>
The right panel shows the content of the highlighted
menu item.
TV menu
TV settings
Settings assistant
Reset to standard
Picture
TV settings
Features
Installation
Sound
Ambilight
Info
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 13
How to navigate through the menus (continued)
EN
4. Use the cursor up/down to select a menu item.
- TV settings allows you to adjust your preferred picture,
sound and ambilight settings
TV menu
TV settings
Settings assistant
Reset to standard
Picture
TV settings
Features
- Features allows you to control the settings of special TV
features
- Installation allows you
- to select your language preferences;
- to search for and store your TV channels;
- to set or adjust various special functions;
- to select connected peripheral equipment;
- to define one or more channel numbers as decoder
channel numbers;
Installation
Sound
Ambilight
Info
- to reset your picture, sound and ambilight settings to the
factory standard settings;
- to upgrade your TV software.
5. Press the cursor right to enter the highlighted menu item.
>
The content of the right panel is moved to the left panel
and the right panel now shows the content of the newly
highlighted item in the left panel.
Note: in some cases it is important that the picture can be
watched while you adjust the settings.This means that when
the highlight is on the right side panel, the other menu items
hide away.When the cursor left is pressed, the hidden menu
items reappear and the highlight moves to the left panel.
6. Press the MENU/BROWSE key to exit the main menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 14
Use of the TV menu settings
EN
The TV menu allows you to access and change settings and
preferences in case you want to change the First time
installation settings and/or you want to control the settings of
special TV functions, features and peripheral equipment.
Television
Multimedia
TV menu
TV channels
Programme guide
Media servers
Adjust viewing and listening settings
TV menu
TV settings
Settings assistant
Reset to standard
Picture
1. Press the MENU/BROWSE key on the remote control.
TV settings
Features
>
The main menu appears on the screen.
2. Select TV menu and press the cursor right.
The TV menu is displayed.
3. Select TV settings and press the cursor right.
The TV settings menu is moved to the left.
>
Installation
Sound
>
Ambilight
4. Press the MENU/BROWSE key to exit the menu.
To make it easier to change the settings of the TV, there are
3 ways of doing it.
Info
A. Change settings in an easy-to-use manner with the
Settings assistant
Each time you've made a selection, press the green key to
confirm your selection.
1. Select Settings assistant and press the cursor right.
>
By means of several split screens/full screens you are
prompted to select your preferred picture, sound and
ambilight settings to finally arrive at a complete setting
which satisfies you.
See First time installation, Step 3: Settings assistant:
select your TV settings, p. 11.
2. Press the green colour key to return to the TV menu again.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 15
Use of the TV menu settings (continued)
EN
(if present)
B. Use of the Standards settings
This allows you to reset your settings for viewing and
listening to predefined factory settings.
TV menu
TV settings
Reset to standard
Current
1. Select Reset to standard and press the cursor right.
Settings assistant
Reset to standard
Picture
>
>
>
A menu appears which allows you to select one of the
standard settings for viewing and listening.
Current shows your current settings for viewing and
listening.
If you select Natural, it allows you to set your picture,
sound and ambilight settings to the recommended
standard values. In most cases this will give the best
balanced viewing experience.
Natural
Vivid
Subtle
Sound
Ambilight
>
>
If you select Vivid, it allows you to set your picture,
sound and ambilight settings to rich values, making use
of the TV capabilities to its full extend.
If you select Subtle, it allows you to set your picture,
sound and ambilight settings to the purest
representation of the original source content.
Info
2. Press the green colour key to store the selected setting.
C. Individual settings for picture, sound and ambilight
<
Select Picture, Sound or Ambilight and press the cursor
right.
>
>
>
>
A menu appears which allows you to fine tune the
picture, sound and ambilight settings.
To adjust the Picture settings, see Adjust picture menu
settings, p. 16.
To adjust the Sound settings, see Adjust sound menu
settings, p. 19.
To adjust the Ambilight settings, see Enjoy Ambilight,
p. 21.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 16
Adjust picture menu settings
EN
The picture menu contains the settings that affect the quality of
the picture.
TV menu
TV settings
Settings assistant
Reset to standard
Picture
TV settings
Features
1. Press the MENU/BROWSE key on the remote control.
>
The main menu appears.
2. Select TV menu and press the cursor right.
The TV menu is moved to the left.
3. Select TV settings and press the cursor right.
The TV settings menu is moved to the left panel.
4. Select Picture and press the cursor right.
The Picture menu is moved to the left panel.
Installation
Sound
>
Ambilight
>
>
Info
5. Use the cursor up/down to select the Picture menu items.
6. Press the cursor right to enter the selected Picture menu
item.
TV menu
Note: all digital related menu items will only be accessible
in case of digital TV broadcasting.
TV settings
Picture
Contrast
Brightness
Colour
Settings assistant
Reset to standard
Picture
7. Use the cursor keys to adjust the settings.
8. Press the cursor left to return to the Picture menu.
Hue
Sound
Contrast
Sharpness
Tint
Ambilight
Adjusts the intensity of bright parts in the picture but keep
the dark parts unchanged.
..............
Brightness
Info
Adjusts the light output of the complete picture, which will
mainly affect the darker areas of the picture.
Colour
Adjusts the saturation level of the colours to suit your
personal preference.
Hue
Compensates for the colour variations in NTSC encoded
transmissions.
Sharpness
Adjusts the sharpness of fine details in the picture.
Tint
Increases or decreases Warm (red) and Cool (blue) colours
to suit personal preferences.
Select Cool to give the white colours a blue, Normal to
give the white colours a neutral,Warm to give the white
colours a red tint.
Select Custom to make a customised setting in the
Custom tint menu item.
<
<
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 17
Adjust picture menu settings (Continued)
EN
Custom tint (only when Tint is set to Custom)
TV menu
Fine tunes the white point (WP) and black level (BL) of the
picture.
TV settings
Picture
.............
Settings assistant
Reset to standard
Picture
Custom tint
Pixel Plus
1. Select Custom tint and press the cursor right.
2. Use the cursor keys to select and adjust the settings of:
R-WP: allows you to customise the colour tint by adjusting
the red whitepoint of the picture.
Digital Natural Mo..
Clear LCD
Sound
Ambilight
G-WP: allows you to customise the colour tint by adjusting
the green whitepoint of the picture.
B-WP: allows you to customise the colour tint by adjusting
the blue whitepoint of the picture.
R-BL: allows you to customise the colour tint by adjusting
the red blacklevel of the picture.
Dynamic contrast
.............
Info
G-BL: allows you to customise the colour tint by adjusting
the green blacklevel of the picture.
3. Use the colour keys to reset to the predefined settings.
4. Press the cursor left to return to the Picture menu.
Pixel Plus
Pixel Plus is the most ideal setting, as it fully processes the
image to make every single pixel the best it can be,
improving contrast, sharpness, picture depth, and colour
reproduction and brilliance from every source, including
High Definition.
<
Select On or Off in order to activate/de-activate Pixel plus.
Digital Natural Motion
Reduces the field and line flicker and reproduces smooth
movement especially in movies.
Select Off, Minimum or Maximum in order to really see
<
the difference in picture quality.
ClearLCD (if available)
ClearLCD results in superior sharpness of motion
reproduction, better black level,high contrast with a flicker-
free, quiet image and a larger viewing angle.
Dynamic contrast
Automatically makes the contrast in the darker and the
brighter picture areas more noticeable as the image on the
screen changes.
<
Normally select Medium. It may be preferred to select
Minimum, Maximum or Off.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 18
Adjust picture menu settings (Continued)
EN
DNR
DNR automatically filters out and reduces the image noise.
TV menu
TV settings
Picture
This improves picture quality when receiving weak signals.
Select Off, Minimum, Medium or Maximum according
to the image noise in the picture.
.............
Settings assistant
Reset to standard
Picture
<
DNR
MPEG artefact red.
Colour enhancem..
Active control
Light sensor
Picture format
MPEG artefact reduction
Sound
MPEG artefact reduction On smoothens the transitions
Ambilight
on digital content.
Select On or Off.
<
Colour enhancement
Info
Automatically controls green enhancement and blue stretch.
It makes the colours more vivid.
Select Off, Minimum, Medium or Maximum.
<
Active control
The TV continuously measures and corrects all incoming
signals in order to provide the best picture possible.
Select On or Off to activate/de-activate Active control.
Light sensor
Light sensor On automatically adjusts the picture and
<
ambilight settings for best viewing dependent on the lighting
conditions in the room.
Select On or Off.
<
Picture format
This allows you to adjust the size of the picture dependant
on the broadcasted format and your preferred setting.
How to navigate through the TV settings menu, see p. 13:
Use of the TV menu settings.
Tip: this function is also accessible via the OPTION key on
the remote control.
Auto format
Super zoom
Choose among the following picture formats:Auto format,
Super zoom, 4;3, Movie Expand 14:9, Movie Expand 16:9 or
Wide screen.
Auto format makes the picture fill the screen as much as
possible.
4:3
Movie expand 14:9
In case of subtitles in the bottom black bar,Auto format
makes the subtitles visible.
In case of a broadcaster logo in the corner of the top black
bar, the logo disappears from the screen.
Super zoom removes the black bars on the sides of 4:3
programmes with minimal distortion.
Movie expand 16:9 Wide screen
When in Movie Expand 14:9, Movie Expand 16:9 or Super
zoom screen format, you can make subtitles visible with the
cursor up/down.
Note: with HD sources not all picture formats will be
available.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 19
Adjust sound menu settings
EN
The sound menu contains the settings that affect the quality of
the sound.
TV menu
TV settings
Sound
Equalizer
Volume
1. Press the MENU/BROWSE key on the remote control.
Settings assistant
Reset to standard
Picture
>
The main menu appears.
2. Select TV menu and press the cursor right.
The TV Menu is moved to the left.
3. Select TV settings and press the cursor right.
The TV settings menu is moved to the left panel.
4. Select Sound and press the cursor right.
The Sound menu is moved to the left panel.
Balance
>
Digital audio lang..
Dual I/II
Sound
Ambilight
>
Mono/Stereo
.............
>
5. Use the cursor up/down to select the Sound menu items.
6. Press the cursor right to enter the selected Sound menu
item.
Info
Note: dependent on the input signal, one or more menu
items may not be selectable.
7. Use the cursor keys to adjust the settings.
8. Press the cursor left to return to the Sound menu.
Equalizer
Allows you to change the frequency response of the sound
to match your personal taste.
Tip: this function is also accessible via the OPTION key on
the remote control.
Volume
Allows you to adjust the sound output level.
Balance
Allows you to adjust the output of the right and left
speakers to obtain the best stereo reproduction for your
listening position.
Digital audio language (only with Digital TV broadcasting)
Allows you to select an audio language out of the list of the
available broadcasted languages for the current digital
programme.
Note: if there is more than one variant for an audio
language, then select one of the variants.
To permanently change the audio language, use the
Language menu in the Installation menu.
Tip: this function is also accessible via the OPTION key on
the remote control.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 20
Adjust sound menu settings (Continued)
EN
Dual I/II
Allows you to select, per channel, Dual I or Dual II, when
TV menu
TV settings
Sound
dual sound transmission is available.
.............
Settings assistant
Reset to standard
Picture
Mono/Stereo
Surround mode
Headphone volume
AVL
Mono/Stereo
Allows you to select, per TV channel, Mono or Stereo sound
when stereo broadcasts are available.
Sound
Ambilight
Surround mode
Delta volume
Auto surround
Allows you to select the modes for more spatial or
surround sound reproduction dependent on the
broadcasted signals or signals from external inputs received.
Info
Headphone volume
Allows you to control the level of sound through the
headphones.
AVL (AutomaticVolume Leveler)
Automatically reduces the volume differences between
channels and programmes, providing a more constant overall
level.This will also reduce the dynamics of sound.
Delta volume
Allows you to correct for any permanent volume differences
between TV channels or external sources.
Auto surround
When switched On, this allows the TV to automatically
switch to the best surround sound mode the broadcaster
transmits.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 21
Enjoy Ambilight
EN
The ambilight menu contains the settings for controlling the
ambient lighting. Using ambient light gives a more relaxed
viewing experience and improves perceived picture quality.
Analysis of the picture content adapts the colours continuously.
But the lights can also be set to any fixed colour and many
shades of white.
TV menu
TV settings
Ambilight
Ambilight
Brightness
Mode
Settings assistant
Reset to standard
Picture
Colour
Sound
Tip: in standby mode the lights can be set/operated to any
colour and create a unique ambiance in the room. See
Ambilight in standby mode, p. 23.
Custom colour
Separation
.............
Ambilight
Info
1. Press the MENU/BROWSE key on the remote control.
>
The main menu appears.
2. Select TV menu and press the cursor right.
The TV Menu is moved to the left.
3. Select TV settings and press the cursor right.
The TV settings menu is moved to the left panel.
4. Select Ambilight and press the cursor right.
The Ambilight menu is moved to the left panel.
>
>
>
5. Use the cursor up/down to select the Ambilight menu
items.
6. Press the cursor right to enter the selected Ambilight menu
item.
7. Use the cursor keys to adjust the settings.
8. Press the cursor left to return to the Ambilight menu.
Ambilight
Allows you to switch the lights On or Off at the rear of the
TV.
Select Off to switch off the ambient lights and downlight all
other ambilight menu items.
Select On to switch on the ambient lights. Refine the light
settings in the menus below.
<
<
Brightness
Allows you to adjust the light output of the ambilights.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 22
Enjoy Ambilight (Continued)
EN
Mode
Allows you to choose for constant background lighting or
TV menu
for background lighting that matches the images displayed
on the screen.
TV settings
Ambilight
.............
Settings assistant
Reset to standard
Picture
<
Use the cursor keys to select Colour, Relaxed, Moderate or
Dynamic.
Mode
Colour
- Colour: this will show constant light according to the
settings in the Colour menu below. It allows manual fine
tuning in the next Ambilight menu items.
- The options Relaxed, Moderate or Dynamic will
dynamically match brightness and colour to the screen
content.The selection made will effect the speed which
determines the viewing impression.
Custom colour
Separation
Colour boost
Balance
Sound
Ambilight
Info
For example:
- in Relaxed mode, the rate of brightness and colour
change, as predefined in the factory, is smoothly and soft
which gives you an immersive yet relaxed viewing.
- in Moderate mode the rate of brightness and colour
change can be experienced as between Relaxed and
Dynamic.
- in Dynamic mode the rate of brightness and colour
change is more quick and dynamic.This gives you full
immersion and involvement with the screen content.
Notes:
- the rate of change is limited, as not to cause
uncomfortable sensations;
- according to the selection made, some Ambilight menu
items will be downlighted and can not be selected.
Colour
Note: only available when Colour has been selected in the
Mode menu above.
Allows you to select or adjust the colour of the light to
your own personal choice.
- Warm white is matched to that of most normal
lightbulbs. Select this setting if you want the Ambilight to
fit best with normal living room lighting.
- Cool white is matched to that of normal daylight
(6500K). Select this setting if you prefer more cool lighting.
Note: the 6500K is the SMPTE recommended setting for
ambient backlighting of displays.
- Blue: preferred by most consumers to create a cool,
modern and/or mystical atmosphere. Select this setting
according to your personal taste or mood.
- Red: preferred by most consumers to create a cosy,
special atmosphere. Select according to your personal
taste or mood.
- Custom: select if you want to customise the ambilight
colour.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 23
Enjoy Ambilight (Continued)
EN
Custom colour
Note: only available when Custom has been selected in
TV menu
TV settings
Ambilight
.............
the Colour menu.
Settings assistant
Reset to standard
Picture
Mode
Allows you to customise the ambilight colour.
Select Palette to select the general colour of the light
output.
Colour
<
<
Custom colour
Separation
Colour boost
Balance
Sound
Select Saturation to adjust the colourfulness of the light.
Ambilight
Separation
Allows you to define the stereo effect in case, Relaxed,
Moderate or Dynamic has been selected in the Mode menu.
Select Off for a mono behaviour which means that all lamps
will behave equally.
Select Minimum, Medium or Maximum to define the
Ambilight stereo effect spread over the available lamps.
Info
<
<
Colour boost
Note: not available when Colour has been selected in the
Mode menu.
Allows you to amplify the colours of the light for a more
dynamic effect.
Select Off, Minimum, Medium or Maximum according
to your personal preference.
<
Balance
Allows you to adjust the colour and level of light intensity
on the sides of the picture.
Ambilight in standby mode
When the TV is switched off, the ambient lights will also be
switched off.When the TV is in standby mode, ambilight can
be used to provide a unique ambience for the room.
Press the Ambilight key on the remote control to switch
between Ambilight On or Off. See Use of the remote
control, p. 6.
<
<
Press the MODE key repeatedly to toggle through the
Ambilight modes.
Note: when the TV is switched to standby, and you switch
Ambilight On, then less Ambilight modes are available.
Caution: Infrared interference
To avoid bad infrared remote control reception, place your
peripheral equipment out of sight of the ambient lights of
your TV. Ambilight does not function well when the room
temperature is less than 59°F/15°C.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 24
Adjust feature menu settings
EN
The Features menu allows you to control the settings of special
TV functions, features and accessory equipments.
TV menu
Features
1. Press the MENU/BROWSE key on the remote control.
TV settings
Features
PIP format
>
The main menu appears.
2. Select TV menu and press the cursor right.
The TV Menu is moved to the left.
3. Select Features and press the cursor right.
The Features menu is moved to the left panel.
Subtitle
Installation
Digital subtitle lan..
Sleeptimer
Child lock
>
>
4. Use the cursor up/down to select the Features menu items.
5. Press the cursor right to enter the selected Features menu
item.
Set/Change code
.............
6. Use the cursor keys to adjust the settings.
7. Press the cursor left to return to the Features menu.
Info
PIP format
This menu allows you to select the preferred format (PIP or
Dual screen) which can then be displayed toggling the b
key on the remote control On or Off.
See Use of the remote control, p. 6.
Tip: this function is also accessible via the OPTION key on
the remote control.
Subtitle
This displays Teletext and DVB-T subtitles from the selected
TV channel.These can be permanently displayed, or only
when mute is active.The teletext subtitle page of analogue
channels must be stored for each TV channel.
1. Switch on teletext and select the proper subtitle page from
the index.
2. Switch off teletext.
3. Select
- Subtitle On to display the subtitles on the selected TV
channels.
- On during mute to automatically display the subtitles
only when the sound has been muted with the ¬ key on
the remote control.
Tip: this function is also accessible via the OPTION key on
the remote control.
Digital subtitle language (only with Digital TV broadcasting)
This allows you to (temporarily) select your preferred
subtitle language out of the list of the broadcasted languages
for the current programme.
Note: to permanently change the subtitle languages, use
the Language menu in the Installation menu.
<
Use the cursor up/down to temporarily overrule your
permanent language selection and confirm with the OK key.
Tip: this function is also accessible via the OPTION key on
the remote control.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 25
Adjust feature menu settings (Continued)
EN
Sleeptimer
This sets a time period after which the TV automatically
switches to standby.
1. Select Sleeptimer.
2. Press the cursor right.
3. Select a value with the cursor up/down.
TV menu
Features
TV settings
Features
.............
Sleeptimer
Child lock
Installation
Set/Change code
On timer
>
The list will have values from 0 to 180 minutes.When 0
is selected, the sleeptimer is switched off.
Common interface
Demo
Note: you can always switch off your TV earlier or select
another time set.
Info
Child lock
With a 4-digit code, you are able to lock TV channels and
external sources to prevent children from watching certain
programmes.
1. Select Child lock.
2. Press the cursor right to enter the Child lock menu.
3. Enter your 4-digit code.
Note: you have to re-enter your code each time you
enter the Child lock menu.
4. Select one of the menu items of the Child lock menu and
press the cursor right:
- Lock to lock all channels and externals:
- Custom lock to lock a certain programme or to lock all
the channels from a certain time.
< Select:
- Lock after to lock all programmes from a certain time
onwards.
< Press the cursor right twice.
< Select On to set the lock.
< Press the cursor left.
< Select Time and press the cursor right.
< Enter the time with the cursor up/down and right.
- Channel lock to lock a certain TV channel or external.
< Press the OK key to activate/deactivate.
- Parental rating to set an age rating to a digital
programme if the programme is parental rated.The ratings
applied are according the selected country in the initial
installation.
< Press the cursor right and select an age rating with the
cursor up/down.
- Select Unlock to disable all locks you have set.
Important: you have forgotten your code !
1. Select Change code and press the cursor right.
2. Enter the overriding code 8-8-8-8.
3. Enter a new personal 4-digit code.
4. Confirm your new entered code.
>
The previous code is erased and the new code is stored.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 26
Adjust feature menu settings (Continued)
EN
Set code/Change code
TV menu
Features
This allows you to set or change the personal 4-digit access
code that is used in the different lock functions of the TV.
TV settings
Features
.............
Sleeptimer
Child lock
<
<
Select Set or Change code.
Installation
>
If no PIN-code exists yet, the menu item is set to Set
code. Follow the instructions on screen.
If a PIN-code has previously been entered, the menu
item is set to Change code. Follow the instructions on
screen.
Set/Change code
On timer
>
Common interface
Demo
Enter your code with the digit keys.All number
combinations from 0000 to 9999 are valid numbers.
Info
>
The Features menu reappears with a message confirming
that your PIN-code has been created or changed.
On timer
From standby, this automatically switches the TV to the
specified channel number, at a specified time.
1. Select On timer.
2. Press the cursor right to enter the On timer menu.
3. Select Timer and press the cursor right.
4. Select On.
5. Select Channel and then the TV channel you want your TV
to switch to on a selected time and day
6. Select Day and then a day of the week or select Daily.
7. Select Time and enter the time with the digit keys or with
the cursor up/down.
8. Press the OK key to activate.
9. Press the cursor left to return to the Features menu or
press the MENU/BROWSE key to switch off the menu.
Note: From now on, every week, your TV will
automatically switch to the selected channel, on the
selected day, at the selected time, until the On timer
function is switched off again.
Note: only one On timer can be set.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 27
Adjust feature menu settings (Continued)
EN
Common interface
TV menu
Features
Note: this functionality is only available in certain countries.
TV settings
Features
.............
Sleeptimer
Child lock
This allows you to access common interface applications
defined by the service provider of the Common Interface
(CI) module.
The Common Interface (CI) module can contain one or
more applications, which are used to communicate with the
CI service provider and provide some additional facilities to
the user.
Installation
Set/Change code
On timer
Common interface
Demo
See Use the Common Interface slot, p. 55.
Info
Note: this menu item and the common interface
applications are only selectable when an authenticated
Common Interface card is present and some Common
Interface card user interface sessions are listed.
The CI service provider is responsible for the messages
and texts on screen. In case of failure or strange behaviour,
you must call your CI service provider.
Demo
This allows you to get an idea of the features that are part
of the television.
1. Select Demo.
TV menu
Features
2. Press the cursor right.
3. Select a desired demo.
4. Press the OK key to start the demo.
Demo
Pixel Plus
..............
>
The selected demo is played once.
Ambilight
Dig. subtitle langu.
Sleeptimer
5. Press the red colour key to stop the demo and to return to
the demo menu.
6. Press the red colour key to exit the demo menu.
ClearLCD
Settings assistant
Active control
Child lock
Set/Change code
On timer
Common interface
Demo
Info
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 28
How to search for and store TV channels
EN
Tip: you will need this chapter only if you want to change the installation settings.
Installation menu
Television
Multimedia
TV menu
This menu will adjust settings related to the installation of the
TV channels, language and country and to the initial installation
of your TV.
TV channels
Programme guide
Media servers
1. Press the MENU/BROWSE key on the remote control.
>
The main menu appears.
2. Select TV menu and press the cursor right.
The TV Menu is moved to the left.
3. Select Installation and press the cursor right.
The Installation menu is moved to the left panel.
4. Use the cursor up/down to select the Installation menu
items.
5. Press the cursor right to enter the selected Installation
menu item.
6. Use the cursor keys to make a selection.
7. Press the OK key to activate or to confirm.
8. Press the cursor left to return to the Installation menu or
press the MENU/BROWSE key to switch off the menu.
TV menu
Installation
>
TV settings
Features
Languages
Country
>
Installation
Time zone
Channels
Manual network i..
Preferences
.............
Info
Select your language preferences
This menu allows you to select your preferred language for
menu, audio and subtitle.
TV menu
Installation
Languages
Menu language
Menu language
Preferred audio l...
Preferred subtitle...
Hearing impaired
Languages
Country
This allows you to select your menu language out of the list
of the available languages.
Time zone
Channels
Preferred audio language (only with Digital TV broadcasting)
Manual network i..
Preferences
Connections
.............
This allows you to select your audio language preference in
case several languages are broadcasted.
Preferred subtitle language (only with Digital TV broadcasting)
This allows you to select your subtitle language preference
in case several languages are broadcasted.
Info
Hearing impaired (only with Digital TV broadcasting)
This allows you to select the hearing impaired audio or
subtitle language.
When set to On, the Hearing impaired version of your
preferred audio or subtitle language will, if available, be
reproduced.
When set to Off, the normal audio and subtitle language
behaviour will be applicable.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 29
How to search for and store TV channels (Continued)
EN
Select your country
TV menu
Installation
TV settings
Features
.............
This allows you to select the country where you are now
located.
Manual network i..
Preferences
Connections
Decoder
Installation
Notes:
- if you select a wrong country, the channel numbering will not
be according to the standard for your country;
- in case the country selected is not DVB-T supported by your
TV, digital related menu-items will not be accessible.
Factory settings
Software upgrade
Info
(only with Digital TV broadcasting)
Select the time zone
Only applicable for certain countries and dependent on the
selected country.
This allows you to select your local time zone so that the clock
display shows the correct time.
Store TV and radio channels
After language and country are set correctly, you can now
search for and store the TV channels.
TV menu
<
Select Channels in the TV, Installation menu.
Installation
Channels
Automatic installation
Autom. installation
Installation update
Digital: test recept..
Analogue: manual..
Rearrange
Languages
Country
The TV will scan the entire frequency spectrum based on
the selected country.
Time zone
>
All available digital and analogue TV and digital radio
channels are searched for and stored automatically.
This will take a few minutes.
Channels
Manual network i..
Preferences
Connections
.............
>
When the search is complete, the menu will indicate the
number of digital and analogue channels found.
Installation update
This allows you to automatically tune to and update all
available channels.
Info
Notes:
- this will not reinstall uninstalled channels;
- new channels found will not be added to any favourite
list;
- already installed channels will not be renumbered.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 30
How to search for and store TV channels (Continued)
EN
Digital: test reception (only with Digital TV broadcasting)
TV menu
This allows you to see the quality and the strength of the
signal reception for a digital frequency.This enables you to
find the antenna position that gives the best reception.
Installation
Channels
Autom. installation
Installation update
Digital: test recept..
Analogue: manual..
Rearrange
Languages
Country
<
Select Digital: test reception and press the cursor right.
Time zone
>
You obtain an indication of the actual channel frequency,
the network name, the signal quality and strength.
If the signal quality and strength is poor, you can try
repositioning the aerial.
Channels
Manual network i..
Preferences
Connections
.............
>
Tip: it is however advisable to contact a specialised aerial
installer in order to achieve the best results.
You can also directly enter the frequency of the digital
channels you want to test.
Info
Analogue: manual installation
This gives you the possibility to manually install (tuning-in
channel by channel) analogue channels. Manual installation
will not find nor store any DVB-T (digital) channels.
1. Select Analogue: manual installation and press the
cursor right.
2. Select System.
3. Select your country or part of the world where you are
now located.
4. Select Search and press the cursor right.
5. Select the red or green colour key to proceed.
Tip: if you know the frequency, enter the 3 digits of the
frequency with the digit keys 0 to 9 (For example, 049).
6. Press the cursor left to store the channel found or to
search for another channel.
7. Select Fine tune and press the cursor right.
Fine tuning can be useful when the frequency has shifted a
bit or when interference of another frequency occurs.
Adjust the frequency with the cursor up/down in case of
poor reception of the channel found.
8. Select Store current channel if you want to store the
(fine tuned) frequency under the current channel number.
Press the cursor right and confirm with the OK key.
Select Store as new channel if you want to store the
(fine tuned) frequency under a new channel number.
Press the cursor right and confirm with the OK key.
9. Use the rearrange menu to rename or reshuffle the
channels. See next page.
Note: when on a frequency where a DVB signal is
broadcasted, the tuner will try to decode an analogue TV
channel, and hence will not show video.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 31
Rearrange the channel number list
EN
This allows you to rename, to reshuffle and to uninstall or
reinstall the stored channels.
Press the corresponding colour keys and follow the on
screen instructions.
TV menu
Installation
Channels
<
Autom. installation
Installation update
Digital: test recept..
Analogue: manual..
Rearrange
Languages
Country
Reshuffle
This allows you to change the order of the stored TV
Time zone
Channels
channels.
Manual network i..
Preferences
Connections
.............
1. Select the channel you want to change place.
2. Press the yellow colour key to move up a single position in
the list.
3. Press the blue colour key to move down a single position in
the list.
4. Repeat to reshuffle other TV channels.
Info
TV menu/Installation
Channels
Rename
Rearrange
This allows you to change the name stored in the memory
or to assign a name to a channel or external for which a
name has not yet been entered.
0
1
2
3
4
5
6
7
Automatic instal...
Installation update
Digital: test rec....
Analogue: manual
Rearrange
1. Select the channel you want to rename.
2. Press the red colour key on your remote control.
3. Select the characters with the cursor up/down. Select the
following position with the cursor right.
4. Press the green colour key or the OK key when finished.
Notes:
- press the yellow colour key to delete all characters.The
cursor is positioned at the beginning again;
- press the blue colour key to delete the character the
cursor is positioned. Enter a new character with the
cursor up/down;
Info
- a name can be given to the channel numbers 0 to 999;
- space, numbers and other special characters are located
between Z and A.
Rearrange
0
1
2
3
4
5
6
7
5. Select another channel number and repeat steps 2 to 5.
Uninstall - reinstall
This allows you to uninstall a stored channel so that it is no
longer possible to tune to.This also allows you to reinstall
an earlier uninstalled channel.
Rename
Uninstall Move
up
Move
down
1. Select the channel you want to uninstall.
2. Press the green colour key to uninstall the selected channel.
>
The uninstalled channel is indicated in the list by an icon
in front of the uninstalled channel.
3. Press the green colour key again to reinstall the uninstalled
channel.
Note: uninstalled channels are not reinstalled during an
installation update.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 32
EN
Manual network installation
See the supplied separate Connected Planet guide for further
explanation of this functionality.
Set your preferences
This menu contains items that can set or adjust various special
TV functions and that will typically be accessed only
occasionally.
TV menu
Installation
Preferences
Location
Select your location
.............
This allows you to select the location of your TV.
If you choose for Shop it will result in fixed settings of
picture, sound and ambilight.
The location Home will give full flexibility to change any
predefined settings for picture, sound and ambilight.
Teletext 2.5
OSD
Channels
Manual network i..
Preferences
Connections
Decoder
Programme title
SelectTeletext 2.5
Factory settings
Software upgrade
Some broadcasters offer the opportunity to see more
colours, other background colours and nicer pictures in the
teletext pages.
Select Teletext 2.5 On to take advantage of this feature.
Select Teletext 2.5 Off if you like the more neutral
teletext layout.
Info
<
<
>
The selection made is valid for all the channels which
broadcast Teletext 2.5.
Note: it may take a few seconds before teletext broadcast
switches over to Teletext 2.5.
Select the On Screen Display (OSD)
This allows you to select the display of the volume bar and
a reduced or extended on screen display of programme and
channel information.
Select Minimum to activate the display of reduced channel
information.
Select Normal to activate the display of extended channel
and programme information. For example, information on
the programme, input signal quality of connected peripheral
equipment, the screen format and sound mode, selected
audio language, subtitle language, ratings, remaining time of
the sleeptimer setting,...
<
<
Display a Programme title
This allows you, to display the programme title according to
the transmitted information.
>
When selected Yes, after the selection of a TV
programme or after you press the i key on the
remote control, a programme title will be displayed if
transmitted.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 33
Select your connections
EN
This allows you to select the peripheral equipment you have
connected to the audio and video connectors.
TV menu
Installation
Connections
EXT1
.............
1. Select Connections.
2. Press the cursor right.
EXT2
Time zone
3. Select the input to which the peripheral equipment is
connected.
EXT3
Channels
HDMI 1
HDMI 2
VGA
Manual network i..
Preferences
Connections
Decoder
>
When you select EXT1, EXT2, EXT3, HDMI 1,
HDMI 2, VGA, Side, AUDIO IN L/R or DIGITAL
AUDIO IN, a list appears which allows you to identify
which type of peripheral equipment is attached to this
input.
Side
AUDIO IN L/R
Factory settings
4. Press the cursor right again to enter the list of types of
peripherals connected to the selected input.
Software upgrade DIGITAL AUDIO IN
5. Select the peripheral equipment with the cursor up/down.
Info
Digital Audio In
If a peripheral equipment has a digital audio output, you can
connect this with a single cable to the TV’s DIGITAL
AUDIO IN connector.
In the Connections menu, assign the DIGITAL AUDIO IN
to the corresponding external input to which your
peripheral equipment is connected.
In addition to accepting audio input via Digital Audio In, the
TV can output encoded Dolby Digital audio via the
DIGITAL AUDIO OUT connector to an external amplifier
or receiver. If your amplifier or receiver has a matching
connector for Digital Audio In, you can connect it with a
single cable to the TV's DIGITAL AUDIO OUT.
See To make video and audio connections, Connect a Home
Cinema amplifier, p. 54.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 34
Select a Decoder channel number
EN
This allows you to define one or more channel numbers as
decoder channel numbers when a decoder or a descrambler is
connected to EXT1 or EXT2.
TV menu
Installation
Decoder
Channel
Status
.............
1. Select the channel number under which you have stored the
programme that comes from your decoder or descrambler.
2. Select Status.
3. Select the input used to connect your decoder: None,
EXT1 or EXT2.
Channels
Manual network i..
Preferences
Connections
Decoder
Select None if you do not want the selected channel
number being activated as a decoder channel number.
Factory settings
Software upgrade
Info
Reset the Factory settings
TV menu
This allows you to reset most of the predefined factory states.
Installation
Factory settings
Reset
1. Select and press the cursor right.
2. Press the OK key to erase settings and reset them to their
default values.
.............
Channels
Manual network i..
Preferences
Connections
Decoder
Factory settings
Software upgrade
Info
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 35
How to upgrade the TV software
EN
This allows you to upgrade your TV software using a USB
device.
TV menu
Installation
Software upgrade
Current softw. info
Local upgrades
Announcement
USB device upgrade
.............
It is possible to initiate an upgrade procedure from a USB
device before you start up the TV.The memory device must
be filled with the appropriate upgrade image (and structure)
website.
How to upload a new software version on your memory
device, see Annex 1, Philips TV software upgrade with
portable memory, p. 60.
Channels
Manual network i..
Preferences
Connections
Decoder
Factory settings
Software upgrade
Automatic software announcement (if present)
Info
When you switch on your TV a message may appear that a
new software upgrade is available.
Press the red colour key on the remote control if you want
to be reminded later on.
Press the green colour key on the remote control to
confirm you have read the message.
<
<
>
Once you have confirmed, the message will not pop up
again.
If however, you want to see the last broadcasted
announcement again, select Announcement in the
Software upgrade menu.
Note: as long as the software upgrade has not been
executed, the message will be available.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Create your favourite list
EN
This allows you to select up to four favourite channels lists with
your preferred TV channels and radio stations. For example, each
member of your family can create his/her own favourite list.
In addition to the favourite channel lists you may also select a list
with only digital TV channels or a list with only the radio
channels or a list with only the analogue channels.
Note: when this key is pressed the first time after you have
finished the installation, it will bring up the full channel list. In
other situations it will bring up the last selected channel list.
To select a channel from the displayed favourite list
1. Press the FAV key (or the OK key).
All channels
>
The last selected channel list appears.
EXT1
EXT2
HDMI
2. Use the cursor up/down to select a channel.
3. Press the OK key to display the selected channel.
1 Analogue channel 1
A
2 Digital channel 1
3 Digital channel 2
4 Radio channel 1
5 Data channel 1
To select another favourite channel list
2
b
Change list
1. Press the FAV key.
Tune to a channel by pressing OK.
Use -P+ for page up/down.
>
The last selected channel list appears.
2. Press the red colour key to bring up the list of possible
favourite channel lists.
3. Use the cursor up/down to select a list.
4. Press the OK key.
5. Press the FAV key again to exit.
All channels
All
TV channels
Radio channels
A
Analogue
Favourites 1
Favourites 2
Favourites 3
Favourites 4
To create a favourite list or to modify the list
3
b
1. Press the FAV key.
Change list
>
The last selected channel list appears.
Use cursor up/down to select and
OK to confirm.
2. Press the red colour key.
>
A list with all possible favourite channel lists appears.
3. Use the cursor up/down to select a Favourites (1 to 4)
channel list.
4. Press the OK key.
Favourites 1
EXT1
EXT2
5. Press the green colour key to enter the Edit mode.
HDMI
>
The selected Favourite list will bring up a full channel list.
A
1 Analogue channel 1
6. Use the cursor up/down to select a channel.
7. Press the OK key to check or uncheck the highlighted
channel and to add it to or remove it from your selected
favourite list.
2 Digital channel 1
3 Digital channel 2
4 Radio channel 1
b
4
5 Data channel 1
8a. < Press the green colour key again to leave the Edit mode.
Exit
Leave edit
>
The modified favourite channel list appears.
Press the OK key to mark /
unmark.
< Press the FAV key again to exit.
>
With the –P+ key you will be able to browse through
the TV channels of the selected list.
8b. Press the red colour key to remove the channel list.
Note: with the digit keys you can still select channels which
are not marked as favourite.
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 37
Create your favourite channels list (Continued)
EN
To select only TV or only radio channels on the All
channels list
When the All channels list is displayed or selected you may filter
the list and select a list with only the TV channels or a list with
only the radio channels.
1. Press the FAV key.
>
The last selected channel list appears.
2. Press the cursor left.
3. Select the All channels list and press the cursor right.
4. Press the red colour key to filter.
5. Select your desired channels list.
6. Press the FAV key again to exit.
>
With the –P+ key you will be able to browse through
the TV channels of the filtered list.
Note: the filtering will not be remembered after the TV is
switched off or set to standby.
(only with DigitalTV broadcasting)
EPG (Electronic Programme Guide)
The Electronic Programme Guide shows you detailed
information about the current programme and also about the
next programme (only for TV programmes that provide EPG
information).
Note: these instructions may differ according to the type of
Electronic Programme Guide.
1. Press the a key.
>
The EPG screen appears. Dependent on conditions it
may take some time to acquire EPG data.
The EPG screen updates automatically if the EPG data is
acquired successfully. If not, the EPG screen remains
blank.
>
a
>
Information about the selected programme appears.
<
Use the coloured keys to activate the available EPG features
displayed at the bottom of the screen.
2. To quit the Programme Guide page, press the a key again.
a
When the type of Electronic Programme Guide
available, displays a list ofTV programmes
(only for UK):
1. Use the cursor up/down to select a desired TV programme.
>
Information about the selected programme appears.
Tips:
- press the blue colour key on the remote control to view
more information (not currently displayed) about the
selected programme.
- to quit the display of detailed information, press the blue
colour key again.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 38
EPG (Electronic Programme Guide) (Continued)
EN
2. Press the green colour key on the remote control to
watch/listen to the selected programme currently on air.
3. Press the red colour key to mark/unmark a reminder on
the selected programme. You can set up to a maximum of
10 reminders.
>
The TV will wake up automatically or display a message
when the programme is about to start. Follow the
instructions on screen to watch the programme.
4. Press the yellow colour key to jump to the Next or the
Previous day or back to Today.
5. Press the MENU/BROWSE key, while Programme Guide is
active, to activate the Programme Guide main menu.
° Use the cursor up/down to highlight and select a menu
item.
a
- What's on allows you to browse through the
programme guide information of your preferred EPG
channels.
- Search by genre allows you to search for the
programmes according to a selected genre.
- Scheduled reminders allows you to view and change
the reminders you have set.
a
Note: the reminder(s) will wake up your TV from
standby only if you switched off your TV with the B
key on your remote control.
- Preferred EPG channels are the channels from which
the EPG data is currently being acquired.This menu
allows you to mark/unmark (up to 50) preferred EPG
channels.
Note: after the installation of your channels, by default
40 channels with available EPG data will automatically
be marked as preferred EPG channel.
Programme Guide What’s on
12:00 South today
What’s on
13:30 Working lunch
12:30 Brainteaser
12:00 This is BBC THREE
.........
Search by genre
Scheduled reminders
Preferred EPG chann..
Acquire EPG data
- Acquire EPG data allows you to update the
information for the preferred programme guide
channels. Follow the instructions on screen.
Note: Acquisition of EPG data is done automatically
while watching TV.
6. To quit the Electronic Programme Guide, press the a key
Info
again.
Tips:
- the EPG screen will not include TV channels which are
not in the Preferred channel list or which are uninstalled
(See Rearrange menu).
- new added channels (via reinstallation or installation) will
have to be marked in the preferred EPG channel list
before you can see EPG data.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 39
Multimedia Browser
EN
The Multimedia browser lets you display pictures and/or movies
or play audio files stored on a USB device or a memory card.
The Multimedia browser application is invoked from the main
menu.
Your TV is also equipped with the possibility to connect your
computer or home network and to access and view your
personal multimedia files. See the supplied separate Connected
Planet guide for further explanation of this functionality.
- Following types of memory cards can be read:
Compact flash I & II, Memory stick, memory stick PRO, SD
Card/Mini SD Card, Smart Media, Micro Drive, MultiMedia
Card.
- Following file formats can be reproduced:
for pictures: JPEG
a
for audio: MP3, MP3 Pro, LPCM
for video: MPEG1, MPEG2, MPEG4, DIVX4,5 and XVID files
- Only FAT/DOS-formatted memory devices are supported.
- If your digital camera is not supported, try one of the
following solutions:
- make sure your camera is switched on and verify if its
configuration settings are correct (see the manual of your
camera)
- remove the memory card from your camera and insert it in
more information.
- Philips can not be held responsible if your USB device is not
supported.
To view content from a Memory Card/USB device
Tip: if your USB device does not fit into the USB connector at
the side, use an USB extend cable to connect the USB device
to the USB port.Ask your dealer for more information.
To insert a Memory card/USB device
Notes:
- Memory cards or USB devices are not supplied with this TV.
- Maximum two USB devices can be used at the same time.
Insert a memory card in one of the cardslots at the right side of
the TV. Insert it to be clicked in.
In case of a USB-memory stick or a digital camera, connect it to
one of the USB 2.0 connectors at the side.
See To make video and audio connections, Side panel overview,
p. 47.
When a USB device is inserted, the Multimedia browser menu is
displayed automatically. See further.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 40
Multimedia Browser (Continued)
EN
To remove the Memory card/USB device
1. Press the MENU/BROWSE key on the remote control to
switch off the main menu.
2. Remove the Memory card/USB device.
Card data protection
• Do not remove the card/USB device when the
content is being read or when browsing. Such
action may damage the memory card/USB
device.
Compact Flash I & II /
Micro Drive
• Do not touch the terminals on the back of the
card.
Memory Stick
• Always insert a card in the correct direction.
Failure to do so may result in damage to the
card and the unit.
• Do not subject the card to excessive pressure
or strong impacts.
MultiMedia Card /
SD Card
• Malfunctions of the unit or card may result in
data loss or damage to the card.
• Philips shall not accept any liability for damage or
loss of stored data.
Smart Media
Card
Warning: memory cards can be swallowed by
young children. Do not allow children to handle
memory cards. Please, remove the memory card
immediately after use.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 41
Multimedia Browser (Continued)
EN
Multimedia Browser menu
1. Insert a USB device.
2. Select the USB device under Multimedia with the cursor
up/down.
Television
Multimedia
TV menu
TV channels
Programme guide
Media servers
>
>
>
The Multimedia browser allows you to browse content
stored on the inserted USB device.
The 2-panel browser will be shown with the left panel
containing the content types (Music, Pictures,Video).
The right panel will display the content that is available
of the selected content type.
Picture
USBDevice 1
Music
3. Press the cursor right to enter the content.
4. Press the cursor up/down to select a content.
5. Press the cursor right to enter the content.
6. Press the cursor up/down to select a file or a directory.
London 2005
The Beatles
Xmas2004.alb
arnold.jpg
Picture
Video
Note: press the green colour key to display all the image
files in the current directory as thumbnails when browsing
pictures. Press the green key again to display the image
files in a list.
USBDevice 1
Picture
London 2005
pic001.jpg
pic002.jpg
pic003.jpg
pic004.jpg
London2005
The Beatles
Xmas2004.alb
arnold.jpg
7. In case a file is selected, press the OK key to display a
picture file or to play a video or an audio file.
In case a directory, album or playlist is selected, press the
cursor right to enter the content or press the OK key to
start a slide show or a loop playback of the files present.
8. Press the cursor left to keep music playing and switch back
to the Multimedia menu.
9. Press one of the colour keys on the remote control to
perform the corresponding function mentioned at the
bottom of the screen.
USBDevice 1/Picture/London2005
pic001.jpg
London2005
pic001.jpg
pic002.jpg
pic003.jpg
pic004.jpg
Tip: the blue colour key can, if necessary, be used to let
the colour keys reappear.
USBDevice 1/Picture/London2005
London2005
pic001.jpg
10. To stop playing content, press the ‡ key on the remote
control.
Notes:
- your TV supports slide shows with background music.
See Annex 2, Philips TV-slideshow format with
background music, p. 63;
pic001.jpg
- the playback will continue to play even if temporarily
switched to browser screens.The audio will be stopped
when another song starts playing, or when the end has
been reached;
Press OK to play.
- more technical remarks can be found in Annex 3, Philips
TV- Portable memory and USB issues, p. 65.
Following icons may appear:
folder
self made playlist/album
video
pictures
music
41
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 42
Multimedia Browser (Continued)
EN
Function keys at the bottom of the screen
Details
to display a description of the selected file
or directory
Transitions
Slide time
to select if you like to apply a transition
during a slide show
to select the duration a picture will be
displayed in a slide show
Rotate
to rotate a picture
Repeat one/all
Shuffle
to repeat the playback of a music file
to shuffle music collections in a random way
Zoom
to select one of the zoom magnifications
(x1, x2, x4) with the cursor up/down.
Additionally you can shift the selected zoom
window over the screen with the cursor
keys.
Full/small screen to toggle between a full or a small screen
Note: to rotate a picture or to select one of the zoom
OK
magnifications, first stop the slide show with the
key or
the blue colour key.
Multimedia function keys on the remote control
Ò
‡
to fast rewind displaying content
to stop playing content
π
- to play a single file, start a slide show, playback of a
folder or other collection
- to pause playing content
†
to fast forward displaying content
Viewing content via Media servers
Television
Multimedia
TV menu
Media servers provides easy access to your personal
multimedia files.You get access to digital pictures, video and
music files on your PC. How to access your personal digital
content, see the supplied separate Connected Planet guide.
TV channels
Programme guide
Media servers
42
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 43
Teletext
EN
Note:Teletext is not available via equipment connected to the
HDMI
connector.
Most TV channels broadcast information via teletext.
This TV has a 1200 pages memory that will store most
broadcasted pages and subpages to reduce waiting time.After
each programme change, the memory is refreshed.
<
Press b to switch the teletext on.
The main index page appears on the screen.
>
a
Select aTeletext page
<
Enter the desired page number with the digit keys or with
the -P+ key.
<
Select the options at the bottom of the screen with the
colour keys.
Previous selected teletext page
Press the 0 key.
<
SelectT.O.P. teletext broadcasts
<
Press i.
A T.O.P. overview of the teletext subjects available is
displayed.
>
<
Select with the cursor up/down, left/right the desired
subject and press the OK key.
v
Note: not all TV channels broadcast T.O.P. teletext.
Select subpages
When a selected teletext page consists of different
subpages, a list of available subpages appears on the screen.
Press the cursor left or right to select the next or previous
subpage.
Picture/Teletext
1. Press the b key.
2. Press the b key to show Teletext on the right of the
screen.
3. Press the b key to return to a full teletext picture.
4. Press the b key to return to a full screen picture.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 44
Teletext (Continued)
EN
Hypertext
With hypertext you can quickly jump to a pagenumber or
search for a specific word shown on the current teletext
page.
1. Press the OK key to highlight the first word or a number
on the page.
2. Use the cursor up/down, left/right to select any other word
or number you want to search for.
3. Press the OK key to confirm.The search starts.
>
A message appears at the bottom of the screen to
indicate the searching, or that the word or page is not
found.
4. Use the cursor up until the top of the page to exit
hypertext.
a
Enlarge aTeletext page
<
Press the OPTION key on the remote control repeatedly
to display the upper teletext part, the lower teletext part
and then to return to the normal teletext page size.
Teletext menu
The Teletext menu offers various functions to control teletext.
Menu
1. Switch teletext on and press the MENU/BROWSE key to
activate the menu.
Reveal
Off
2. Press the cursor up/down to select the menu items.
3. Press the OK key to activate.
4. Press the MENU/BROWSE key to leave the teletext
menu.
Cycle subpages
Language
Off
Gr. II
Reveal
Reveals/conceals hidden information on a page, such as
solutions to riddles and puzzles.
Cycle subpages (if subpages are available)
Makes the subpages cycle automatically.
Press the OK key to activate and to deactivate again.
<
Language
If the displayed characters on screen do not correspond
with the characters used by the teletext broadcaster, you
can change the language group here.
Select Gr. I or Gr. II with the OK key.
<
44
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 45
Teletext (Continued)
EN
Digital text (only for UK)
Some digital channels offer dedicated digital text services (for
example BBCi).
1. Press b to switch Digital text on.
Note: UK only: Digital text is displayed when programmes
are carrying digital text or interactive services.
a
2. To use the digital text, follow the instructions on screen.
3. Depending on the service, you may be asked to use the
cursor keys, the OK key, the coloured keys, the teletext key
and sometimes the digit keys.
4. When you have finished watching teletext, select a different
channel with the -P+ keys or follow the instructions on
screen to return to picture.
5. Press ‡ CANCEL to cancel digital text or interactive
services.
Text info
Some digital channels also offer information on the
programme being broadcast. In that case a message may
appear at the bottom of the screen for a few seconds.
Follow the instructions on screen and use the cursor keys
to scroll through the next pages.
v
Note: digital text will not be available when Subtitles are set
to On in the Features menu.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 46
To make video and audio connections
EN
Tip: use the inputs that are available on your equipment that provide the best video or audio
performance, as below.
Note: your TV comes with all types of connectors with the exception of the DVI connector but
some of your equipment may be equipped with this type. In this case you'll need a DVI to HDMI
adapter or a HDMI to DVI cable and separate audio cables, all available at your local dealer.
Warning: be sure to connect the DVI output connector first, then connect to the HDMI input on
your TV.
Best video performance
Connector table
Audio connection
required
HDMI
HDMI
(High-Definition
Multimedia
Interface)
No
DIGITAL
AUDIO
DIGITAL
AUDIO
Component video
(480p/576p/720p/
480i/576i/1080i)
AUDIO
IN
AUDIO
IN
R
L
R
L
IN
IN
Yes
Y
Pb
Pr
Y
Pb
Pr
Digital audio
HDTV & Progressive
480p, 576p, 720p, 1080i
HDTV & Progressive
480p, 576p, 720p, 1080i
EXT3
EXT3
DIGITAL
DIGITAL
AUDIO
IN
AUDIO
IN
Component video
(480p/576p/720p/
480i/576i/1080i)
AUDIO
AUDIO
R
L
R
L
IN
IN
Yes
No
Y
Pb
Pr
Y
Pb
Pr
HDTV & Progressive
480p, 576p, 720p, 1080i
HDTV & Progressive
480p, 576p, 720p, 1080i
Analog audio
EXT3
EXT3
Scart
EUROCONNECTOR
S-VIDEO
S-Video
Yes
VIDEO
Video
Yes
No
75
RF/Coaxial
Notes:
- cables are often colour-coded to connectors. Connect red to red, white to white....
- component video (YPbPr) connection is necessary to view video sources, for example digital
broadcastings coming from a settop box, in 1080i, 720p, 576i, 576p, 480i or 480p.
- PC equipped with aVGA connector, see p. 53.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 47
To make video and audio connections - Side panel overview
EN
Camera, Camcorder, Game
1. Connect your camera, camcorder or game as
shown.
2. Connect to VIDEO 2 and AUDIO L 3 for
mono equipment. For stereo equipment also
connect AUDIO R 3.
S-VHS quality with an S-VHS camcorder is
obtained by connecting the S-VHS cables with
the S-VIDEO input 1 and AUDIO inputs
3.
Warning: do not connect cable 1 and 2
at the same time.This may cause picture
distortion !
1
3
2
Headphone
1. Insert the plug into the headphone socket L
as shown.
2. The headphone impedance must be between 8
and 4000 Ohm.The headphone socket has a
3.5 mm jack.
In the Sound menu select Headphone
volume to adjust the headphone volume.
Tip: Press ¬ on the remote control to
switch off the internal loudspeakers of the TV.
USB/Memory card
See Multimedia browser, p. 39.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 48
To make video and audio connections - Rear panel overview
EN
AUDIO OUT
AUDIO OUT
DISPLAY SYNCHRONIZED
DIGITAL
AUDIO
OUT
AUDIO
OUT
R
L
DIGITAL
AUDIO
IN
DIGITAL
AUDIO
IN
AUDIO
R
L
IN
Y
Pb
Pr
CABLE
HDTV
&
Progressive
480p, 576p, 720p, 1080i
EXT3
EXT3
ETHERNET
HDMI
VGA
ANTENNA
EXT2
EXT2
EXT1
EXT1
o
o
o
o
o
o
ETHERNET
HDMI
1
HDMI
2
AUDIO IN L/R
PC-VGA
ANTENNA
75
VCR
DVD player
Analogue
Home Cinema
amplifier
Digital
Home Cinema
amplifier
Satellite
receiver
AUDIO OUT
DISPLAY SYNCHRONIZED
DIGITAL
AUDIO
OUT
AUDIO
R
L
OUT
HD receiver
AUDIO
IN
DIGITAL
AUDIO
AUDIO
IN
R
L
IN
Y
Pb
Pr
YPbPr
HDTV & Progressive
480p, 576p, 720p, 1080i
EXT3
PC -VGA
AUDIO IN L/R
VGA
o
o
o
o
o
HDMI 1
HDMI 2
AUDIO IN L/R
PC-VGA
ANTENNA
75
EXT2
EXT1
AUDIO IN L/R
DIGITAL
AUDIO
IN
DVI
1 DVD recorder - 1VCR
2 DVD recorders
2VCRs
PC DVI
DVD player
HD receiver
DVI
DVI
Analogue
Home Cinema
amplifier
VCR
Decoder
DVD player
Decoder
HD receiver
Game console
48
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 49
Connect a VCR or DVD recorder
EN
Warning: do not place your recorder too close to the screen as some recorders may be susceptible
for signals from the display. Keep a minimum distance of 0,5 m from the screen.
With a eurocable
1. Connect the aerial cables 1 and 2 as
shown.
ANTENNA
EXT2
EXT2
EXT1
EXT1
CABLE
o
ANTENNA
75
2. Connect the eurocable 3 as shown.
3. Make your selection of the source to which
the recorder has been connected in the
Installation menu, Select your connections,
p. 33.
EXT 1/2
2
3
1
RECORDER
With the aerial cable only
1. Connect the aerial cables 1 and 2 as
shown.
CABLE
2. Tune in your recorder’s testsignal and store the
testsignal under programme number 0.
See Analogue: manual installation, p. 30.
See also the handbook of your recorder.
ANTENNA
1
o
ANTENNA
75
EXT2
2
RECORDER
Connect a decoder and aVCR
4
Connect a eurocable 4 to your decoder and
to the special euroconnector of your recorder.
See also the handbook of your recorder.
RECORDER
DECODER
Tip: you can also connect your decoder
directly to EXT1 or EXT2 with a eurocable.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 50
Connect two VCRs or VCR and DVD recorder
EN
Note: you can not record signals from equipment connected to the YPbPr input.
With eurocables
1. Connect the aerial cables 1 and 2 as
shown.
ANTENNA
EXT2
EXT2
EXT1
EXT1
CABLE
2. Connect yourVCRs or DVD-recorder to
EXT1 and 2 with the eurocables 4 and 5.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33 and link it to EXT1 or 2.
o
ANTENNA
75
EXT 1/2
3
4
1
5
2
With aerial cables only
1. Connect the aerial cables 1, 2 and 3 as
shown.
2. Tune in your recorder’s testsignal and store the
testsignal under programme number 0.
See Analogue: manual installation, p. 30.
See also the handbook of your recorder.
RECORDER
RECORDER
Connect a satellite receiver
With a eurocable
1. Connect the aerial cables 1 and 2 as
CABLE
shown.
2
2. Connect your satellite receiver to EXT1 and 2
with a eurocable 3.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33 and link it to EXT1 or 2.
EXT2
EXT2
EXT1
EXT1
o
ANTENNA
75
EXT 1/2
3
1
With ComponentVideo connectors
See Connect a DVD player, a satellite receiver
or a HD receiver, p. 51.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 51
Connect a DVD player, HD receiver or game console
EN
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
With a HDMI connector
HDMI 1/2
HDMI is the leading new standard for Digital video
and audio interconnection.
o
o
o
o
HDMI 1
HDMI 2
AUDIO IN L/R
PC-VGA
1. Connect your equipment with the HDMI
connector.
2. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33 and link it to HDMI 1 or 2.
HDMI
Note: in case of any problems, see Annex 4:
Issues referring to connected peripherals with a
HDMI connector, p. 66.
Connect a DVD player or HD receiver
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
With a DVI connector
AUDIO OUT
DISPLAY SYNCHRONIZED
DIGITAL
AUDIO
OUT
AUDIO
OUT
Note: only a DVD player with DVI with digital
R
L
sound can be connected to the HDMI
connector.
DIGITAL
AUDIO
IN
DIGITAL
AUDIO
IN
AUDIO
R
L
IN
Y
Pb
HDTV
&
Proe
480p, 576p, 80i
EXT3
EXT3
1. Connect the DVI to HDMI cable to one of the
HDMI connectors of your TV 1.
HDMI
2. Connect the audio cable 2 to the DIGITAL
AUDIO IN connector of the TV.
o
o
o
o
HDMI 1
HDMI 2
AUDIO IN L/R
PC-VGA
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33, and link it to HDMI 1 or 2.
4. Also select DIGITAL AUDIO IN in the same
Connections menu.
2
HDMI
DIGITAL
AUDIO
IN
1
DVI
51
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 52
Connect a DVD player, a satellite receiver or HD receiver
EN
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
With ComponentVideo Connectors
AUDIO OUT
DISPLAY SYNCHRONIZED
DIGITAL
AUDIO
OUT
AUDIO
L
1. Connect the three separate component video
cables 1 to theYPbPr jacks on the DVD
player and to the Y, Pb and Pr jacks of EXT3
on the TV.
R
OUT
DIGITAL
AUDIO
IN
AUDIO
R
L
IN
Y
Pb
Pr
2. Connect the audio cable 2 to the digital out
of the equipment and to the DIGITAL
AUDIO IN connector of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33, and link it to EXT3. Also select
DIGITAL AUDIO IN in the same
HDTV & Progressive
480p, 576p, 720p, 1080i
EXT3
DIGITAL
AUDIO
IN
EXT3 :
AUDIO IN
R / L
EXT3 :
YPbPr
1
Connections menu.
4. In case of a DVD player with analogue audio,
connect the audio cable to the DVD’s audio L
and R jacks and to the AUDIO IN L/R jack of
EXT3 3.
5. In case of a HD and/or a satellite receiver also
connect the cable TV cable and/or the satellite
antenna cable 4 and the aerial cable 5.
DVD / STB
Notes:
- cables are often colour coded. Connect red to
red, white to white, etc..;
AUDIO OUT
DISPLAY SYNCHRONIZED
DIGITAL
AUDIO
AUDIO
OUT
R
L
OUT
- the labels for the component video sockets may
differ depending on the DVD player connected.
Although the abbreviations may vary, the letters
B and R stand for the blue and red component
signals, respectively, and Y indicates the
luminance signal. Refer to the DVD player’s
instructions for use for definitions and
connection details;
DIGITAL
DIGITAL
AUDIO
IN
AUDIO
IN
AUDIO
R
L
IN
Y
Pb
Pr
CABLE
HDTV & Progressive
480p, 576p, 720p, 1080i
EXT3
EXT3 :
AUDIO IN
R / L
EXT3 :
YPbPr
ANTENNA
- to get an optimal viewing, it is advised to switch
your equipment to the highest possible
supported display modes.
o
1
ANTENNA
75
5
Warning: in case you notice scrolling images,
wrong colours or no colour, no picture, or even
combinations of these on your screen, verify if
the connections are done in the correct way and
if the resolution and the signal standard of the
connected equipment are set in the right way.
See the handbook for your equipment.
4
SAT / STB
52
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 53
Connect a PC
EN
Notes:
- only a PC with digital sound can be connected to the HDMI connection;
- if your PC does not have digital sound output, connect your PC via aVGA connector
HDMI 2
L/R AUDIO
or via
and the
input of the TV;
- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of
60 Hz;
- supported PC monitor modes:
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
PC equipped with aVGA connector:
AUDIO OUT
DISPLAY SYNCHRONIZED
DIGITAL
1. Connect one end of aVGA cable 1 to the
video card of the computer and the other end
to the VGA connector at the bottom of the
TV. Fix the connector firmly with the screws
on the plug.
2. In case of a Multimedia computer, connect the
audio cable 2 to the audio outputs of your
computer and to the AUDIO IN L/R input of
the TV.
3. Select VGA in the Installation menu, Select
your connections, p. 33, and link it to VGA.
4. Also select AUDIO IN L/R in the same
Connections menu.
AUDIO
AUDIO
OUT
R
L
OUT
DIGITAL
AUDIO
AUDIO
IN
R
L
IN
Y
Pb
Pr
HDTV & Progressive
480p, 576p, 720p, 1080i
EXT3
AUDIO in R/L
VGA
o
o
AUDIO IN L/R
PC-VGA
VGA
PC equipped with a DVI connector:
With Digital audio
AUDIO OUT
DISPLAY SYNCHRONIZED
DIGITAL
AUDIO
AUDIO
OUT
R
L
OUT
1. Use a DVI to HDMI cable to connect to one of
the HDMI connectors of your TV 1.
2. Connect the audio cable 2 to the DIGITAL
AUDIO IN connector of the TV.
DIGITAL
AUDIO
IN
AUDIO
R
L
IN
Y
Pb
Pr
3. Select the computer you have connected in the
Installation menu, Select your connections,
p. 33 and link it to HDMI 1 or 2.
4. Also select DIGITAL AUDIO IN in the same
Connections menu.
HDTV & Progressive
480p, 576p, 720p, 1080i
EXT3
EXT3
HDMI
AUDIO in L/R
DIGITAL
AUDIO
IN
o
o
o
o
HDMI 1
HDMI 2
AUDIO IN L/R
PC-VGA
HDMI
With Analogue audio
1. Use a DVI to HDMI cable to connect to the
HDMI 2 connector of your TV 1.
2. Connect the audio cable 3 to the AUDIO
IN L/R input of the TV.
DVI
3. Select the computer you have connected in the
Installation menu, Select your connections,
p. 33 and link it to HDMI 2.
4. Also select AUDIO IN L/R in the same
Connections menu.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 54
Personal computer to the home network connector
EN
Your TV is equipped with the possibility to connect
to your computer or home network.
See the supplied separate Connected Planet guide
for further explanation of this functionality.
DIGITAL AUDIO
IN2
NETWORK
IN1
OUT
EXT
1
EXT
4
Pr
INTERNET
Connect a Home Cinema amplifier
AUDIO OUT
Digital Home Cinema amplifier
DIGITAL
AUDIO
OUT
AUDIO OUT
DISPLAY SYNCHRONIZED
DIGITAL
<
Connect a digital Home Cinema amplifier to
the DIGITAL AUDIO OUT connector 1 at
the bottom of the TV.
AUDIO
AUDIO
L
R
R
OUT
OUT
DIGITAL
AUDIO
AUDIO
IN
L
IN
Y
Pb
Pr
Tip: to avoid visible delay between picture
and sound, use this DIGITAL AUDIO OUT
connector to connect your Home Cinema
amplifier.
HDTV & Progressive
480p, 576p, 720p, 1080i
EXT3
1
DIGITAL
AUDIO
OUT
AUDIO OUT
DISPLAY SYNCHRONIZED
AUDIO
OUT
DIGITAL
AUDIO
AUDIO
Analogue Home Cinema amplifier
R
L
OUT
<
According to the type of connector cables and
the connector input available on your Home
Cinema amplifier, connect your receiver to the
AUDIO OUT L and R connectors 3 or to
EXT1 or 2 2 at the bottom of the TV.
AUDIO
IN
Y
Pb
Pr
HDTV
&
Progressive
480p, 576p, 720p, 1080i
EXT3
EXT2
EXT1
AUDIO
OUT
3
EXT2
EXT1
3
EXT 1 / 2
2
54
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 55
Use the Common Interface slot
EN
Warning: switch off your TV before any module is inserted in the Common Interface slot.
Note: this functionality is only available in certain countries.
To receive scrambled DTV signals you will need a
CA (Conditional Access) module and a Smart card
provided by the service provider.
o
o
o
COMMON INTERFACE
ETHERNET
HDMI 1
HDMI 2
A CA module can enable additional services, for
example Pay TV.
Contact your Common Interface service provider
to get more information about these modules.
Although CA module types may vary dependent
on the manufacturer, each one of the CA modules
supports a certain kind of encryption system.Your
TV supports CA modules to work with the DVB-T
standard.
COMMON INTERFACE
o
o
Note that a smart card may only be valid for a
single broadcast channel.
CA modules and smart cards are neither supplied
nor optional accessories from Philips.
The CA module is responsible for the messages
and texts on screen. In case of failure or strange
behaviour, you must call your CI service
broadcaster.
Insert a CA module
<
Insert the specified Conditional Access module
into the Common Interface slot as far as it will
go. It may take a few minutes before the CA
module is activated and service information is
downloaded.
Warning: when you connect the CA module
incorrectly, it may damage the card and the TV.
After inserting a card, leave it in the slot
permanently. Do not remove it from the slot
unless asked to do so. For example, your card
has to be in the slot when your CI service
broadcaster wants to download new information
to the smart card. Once the CA module is
removed, your TV will no longer decrypt
scrambled digital DVB-T channels.
To access common interface applications, see TV
menu,Adjust feature menu settings, Common
Interface, p. 27.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 56
Select connected equipment
EN
Before operating your connected equipment you have to make
a selection in the Installation, Select your connections menu,
p. 33.
a
1. Press the MENU/BROWSE key.
2. Select TV menu and press the cursor right.
3. Select Installation.
4. Press the cursor right.
5. Select Connections.
6. Press the cursor right.
7. Select the input to which the peripheral equipment is
connected.
8. Press the cursor right again to enter the list of types of
peripherals connected to the selected input
9. Select the peripheral equipment with the cursor up/down.
Record with your recorder
Note: to record digital programmes to an analogue recorder,
the TV needs to be switched on and tuned to that digital
programmes.
You can record a TV programme using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
See the handbook for your recorder.
Note: when recording analogue progammes, switching
channel numbers on your TV does not disturb recording !
56
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 57
Audio- and video equipment keys
EN
Most of the audio and video equipment from our range of
products can be operated with the remote control of your TV.
Press one of the keys after you pressed one of the mode keys
(DVD, STB, VCR, AUX) according to the equipment you want
to operate with this remote control.
See Use of the Remote control, p. 5-6.
B
®
to switch to standby
for record,
Ò
for rewind (VCR, CD);
search down (DVD)
for stop,
‡
π
for play, for pause
a
†
for fast forward (VCR, CD);
search up (DVD)
i
to display information
to switch the menu on or off
for chapter, channel, track selection
digit entry,
MENU/BROWSE
- P +
0 to 9
cursor up/down
to select the next or the previous
disc (CD)
cursor left/right
to select the previous or following
track (CD)
0
b
to select a DVD title/chapter;
index (AUX)
to select your choice of
subtitle language (DVD)
Normal mode: if no action is being undertaken within 30
seconds, the remote control returns to TV mode.
Expert mode: in Expert mode the remote will stay in the
selected mode even when the 30 seconds time-out is elapsed.
v
To select between Normal and Expert mode
1. Select TV mode with the TV key.
2. Press the OK key simultaneously with the ¬ key for four
seconds.
>
When the B key is On for one second, the Expert
mode is selected and the remote control will remain in
the mode selected.
3. Select the desired mode (DVD, STB, VCR, AUX)
4. To go back to the TV mode, select TV and repeat steps
1 to 3.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 58
EN
Troubleshooting
Symptom
No picture
Possible cause/Remedy
< Verify if the supplied cables are connected properly. (The aerial cable to the
TV, the other aerial to your recorder, the power cables, ..)
< Verify if you selected the correct source.
< Verify if the child lock has been switched off.
Poor picture
< Verify in the Manual installation menu if you have selected the correct TV
system.
< Verify if your TV or house aerial isn't located too close to loudspeakers,
non-earthed audio equipment or neon lights, etc.
< Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of
the aerial.
< Is the picture or teletext unrecognisable or do you experience bad teletext
reception ?Verify if you have entered the correct frequency, or fine tune the
frequency for that specific channel or adjust the antenna direction if the problem
isn’t solved by finetuning. See Installation,Analogue: manual installation, p. 30.
Poor colour
No sound
< Select Factory settings in the Installation menu.
< Verify the connections between the optional equipment and the TV.
< Verify if the volume isn't at minimum.
< Verify if the sound hasn't been muted with the ¬ key.
Verify the connections between the optional equipment and the TV.
Sound and picture
interruptions using
HDMI to HDMI
connection
< If it occurs occasionally, perhaps there is something wrong with the broadcasted
programme.
< If it occurs persistently, see the manual of your connected equipment to verify the
necessary adjustments.
< Alternatively, connect an extra audio cable (either an analogue or a digital audio
cable) from your connected peripheral to your TV.
Verify whether you selected the connected equipment in the Installation menu,
Select your connections and also select the respective audio input in the same
Connections menu.
Note:An analogue audio cable must be linked to HDMI 2.
< Limit the HDMI cable length to max 5 m.
< Verify if the connected equipment is properly selected in the Installation menu,
Connections, according to the connection you have made HDMI 1 or 2.
No sound when
using DVI to HDMI
connection
< Verify whether you properly connected the audio cable to the DIGITAL AUDIO
IN connector of the TV.
< Verify whether you selected the connected equipment in the Installation menu,
Select your connections and if you linked it to HDMI 1 or 2 according to where
you made the connection.
Also verify if you selected digital audio in in the same Connections menu.
No digital channels < Contact your dealer about DigitalVideo Broadcasting Terrestrial signal availability
in your country.
No subtitles
(UK ONLY)
< Under certain circumstances Digital text or interactive services may have priority
over subtitles.This can result in the subtitles not automatically reappearing when
leaving Digital text or interactive services on a channel which is broadcasting
subtitles. In these cases subtitles can be initialised, either by toggling the OPTION
or the MENU key on the remote control or by changing channel.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 59
Troubleshooting (Continued)
EN
Symptom
Possible cause/Remedy
The remote does
not function
< Verify if the remote is set correctly for the equipment your are using.
< Verify if the batteries are not dead. Replace the batteries.
You can still use the keys at the left side of the TV.
< Select TV mode on your remote control.
< When pressing a key and some key leds are blinking with a higher speed and
lower intensity than in a normal working condition, and your TV does not react on
the key press, remove the batteries out of the remote control and put them back
again.
The remote of
connected equip-
ment does not
function well
< The infrared signals of the screen may influence the reception sensibility
of other peripherals.
Solution: replace the batteries of the remote of other peripheral
equipment.
No photo or music < Verify if the source complies with a supported code.
play or in poor
quality
No stable or not
synchronisedVGA
picture
< Verify if you have selected the correctVGA mode in your PC.
See Connect a PC, p. 53.
< Verify the connections between the TV and the PC.
No solution found
for your picture or
sound problem
< Switch off your TV off and then on again once.
Never attempt to repair a defective TV yourself.
Verify with your dealer or call a TV technician.
Red blinking led
< Unplug the mains cord for 10 seconds and insert it in again.
Black bars with
HD channels
< Select another picture format.
No EPG data
available
<
The Electronic Programme Guide function and background programme
information are only made available by TV channels that provide EPG
information and in countries which support EPG.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 60
Annex 1 - Philips TV software upgrade with portable memory
EN
Introduction
Philips continuously tries to improve its products and it
wants you to profit of that even after your purchase.
Therefore it allows you to upgrade your TV software using a
USB memory device (not supplied).
You can execute the software upgrade procedure yourself.
Verifying the version of the TV software
TV menu
Before starting the software upgrade procedure, it is advised to
check what your current TV software is.
Installation
Software upgrade
Current softw. info
Local upgrades
Announcement
.............
1. Select Software upgrade in the Installation menu.
2. Press the cursor right.
The Software upgrade menu moves to the left panel.
3. Select Current software info to observe the version and
the description of the current software.
Channels
Manual network i..
Preferences
Connections
Decoder
Factory settings
Software upgrade
Preparing a USB portable memory for software
upgrade
Info
What do you need ?
• A personal computer with web browsing capability.
• An archive utility that supports the ZIP-format (e.g.
WinZip for Windows).
• A preferably empty USB portable memory.
Note: Only FAT/DOS-formatted portable memory is
supported.
New software can be downloaded from the
www.philips.com/support website.
1. Insert a USB portable memory device into a PC linked to
the internet.
3. Choose your country or area/language.
4. Enter your model number.
5. In the Search results, click on the model number.
6. Under Product support, click on Software and drivers.
7. Click on the Firmware Upgrade zip file.
8. Click on the Download arrow in the upper left corner of
your screen.
9. Save the latest software upgrade file to your computer.
10. Double click on the zip-file and copy the file “autorun.upg”
to the root directory on the USB portable memory.
Note: Only use software upgrades that can be found on
60
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 61
Annex 1 (Continued)
EN
Upgrade theTV software
1. Switch off your TV and remove all memory devices.
2. Insert the USB portable memory that contains the
downloaded software upgrade.
3. Switch on your TV with the power key B at the side of the
TV.
Software Upgrade Application
Upgrade busy...
4. The upgrade process starts automatically.After a few
seconds the status of the upgrade procedure is displayed.
Software Id: TL32E-234
Loading
Done
Done
Warning:
Validating
- You are not allowed to remove the USB portable
memory during the software upgrade procedure;
- In case of a power drop during the upgrade procedure,
don’t remove the USB portable memory from the TV.
The TV will continue the upgrade as soon as the power
comes back;
Programming
- If an error occurs during the upgrade you should retry
the procedure or contact your Local Customer Service
Centre.
5. When the message Operation successful appears, remove
the USB portable memory and restart your TV with the
power switch B at the side of the TV.
Your TV will start up with the new software.
Note: once the upgrade is finished use your PC to
remove the TV software from your USB portable memory.
If you need further assistance or in case of problems,
please call your local Philips Customer Centre. See Philips
61
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 62
EN
Annex 1 (Continued)
Local software upgrade procedure
New software, or the currently installed software version,
website.
TV menu
Installation
Software upgrade
Current softw. info
Local upgrades
Announcement
of your PC.
2. Follow the procedure to find the information and the
software related to your TV.
3. Select the latest software upgrade file and download it to
you PC.
4. Decompress the ZIP-file.
.............
Channels
Manual network i..
Preferences
Connections
Decoder
Rename the resulting file “autorun.upg” to for ex.
“upgrade.upg”.
Move the renamed file to the subdirectory “Upgrades”.
Factory settings
Software upgrade
Remark: if there is no subdirectory “Upgrades” present,
please create one.
Info
5. Insert the portable memory that contains the downloaded
software upgrade.
6. Select Software Upgrade in the Installation menu. Go to
Local upgrades.
The TV will list all compatible software available on the USB
portable memory and display the data for each selected
upgrade version.
7. Select the correct upgrade version and press the red colour
key to start the upgrade.
Your TV will restart and will automatically go to the upgrade
mode.After a few seconds it will display the status of the
upgrade procedure.
Warning: if you try to upgrade to a software version
equal or lower than the current version, a confirmation
will be asked. Downgrading to older software should only
be done in case of real necessity.
8. When the software upgrade was successful, remove the USB
portable memory and restart your TV with the power
switch B at the side of the TV.Your TV will start up with
the new software.
Note: Only use software upgrades that can be found on
62
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 63
Annex 2 - Philips TV-Slideshow Format with background music
EN
Notes:
- the latest version of this document can be found on the Philips support website
(www.philips.com/support).
Use the type number of your TV to find this documentation and other related files.
- Philips can’t be held responsible for any problems that may occur as a result of the content in this
document. Errors reported to Philips will be adapted and published on the Philips support website
as soon as possible.
Introduction
This document explains how to make a Philips slideshow file with background audio.
Be aware that the content of this document is addressing technical or software skilled users.
To start the slideshow open the slideshow file in the Multimedia browser of your TV.
1. Press the MENU/BROWSE key on the remote control after having inserted a USB device and
switched on the TV.
2. Go to where you stored the slideshow file (.alb) on your portable memory.
3. Select the slideshow file and press the OK key to start the slide show.
4. To stop a slide show, press the ‡ key.
General Rules
- The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow
files using simple tools.
- All references to network content must be based on the global address of the content.
- Content on a Portable Memory (PM) doesn't have a global address; as a result content from a PM
can never be referenced from a slideshow not stored on the PM itself.
- To maintain portability, a slideshow stored on a PM should ONLY reference content on the same
PM. Referencing global addresses can result in inconsistencies if the PM is used on a non-
networked CE device. The latter is however not forbidden, it is only a recommendation.
- It is preferable that URL’s referencing PM content are based on a relative path starting from the
directory where the slideshow is stored. This path includes the device or drive name of the PM.
An absolute path to content will also be supported.
- relative path: pictures\test1.jpg, tamper.jpg, ..\new\bird.jpg, …
- absolute path: USB1:\pictures1\foo_bar.jpg, C:\f1.jpg, \organization.jpg, …
General Format
The format and syntax below will be used to create the slideshow file (simple ascii text) with the
extension .alb (.ALB). Examples: slshow1.alb, summer_holiday_2004.ALB, test.alb, …
The following syntax should be used to create the text file:
<?xml version="1.0" encoding="ISO-885h9-1" ?>
<philips-slideshow version="1.0" >
<title>Title of the slideshow</title>
<audio>audio_url</audio>
<slide-duration>30</slide-duration>
<slides>
<slide>slide_1_url</slide>
<slide>slide_2_url</slide>
<slide>slide_3_url</slide>
<slide>slide_4_url</slide>
<slide>slide_5_url</slide>
<slide>slide_6_url</slide>
...
<slide>slide_N-1_url</slide>
<slide>slide_N_url</slide>
</slides>
</philips-slideshow>
63
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 64
EN
Annex 2 (Continued)
Supported XML-tags
The following table gives a description of the XML syntax.
Tag Name
Use
Description
philips-slideshow
title
mandatory
optional
Philips slideshow signature including the version.
The title of the playlist.
audio
optional
The audio-URL following this tag will define the music playing
in the background during the slideshow.
A single song or playlist (.m3u & .pls) are the only valid audio
references. Other reference will not result in any audio
playback. If a single song is referenced the song will be
repeated forever. If a playlist is referenced the playlist will be
played in sequence with a repeat at the end of the playlist.
optional
The default display time (in 0,1 second) of a slide. The TV
application isn’t obliged to support this tag. The TV application
can force the use of one or multiple predefined display times.
slide-duration
mandatory
optional
Identifies the slides to show.
slides
slide
Identifies the URL of the individual slide.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 65
Annex 3 - Philips TV - Portable memory and USB issues
EN
Notes:
- the latest version of this document can be found on the Philips support website
(www.philips.com/support);
- the software of your TV is upgradeable. If you have problems first check if you have the latest software
installed on your TV. The latest software, together with instructions, can be found on the Philips
support website. Use the type number of your TV to find this documentation and other related files.
- Philips can’t be held responsible neither for any errors in the content of this document nor for any
problems as a result of the content in this document. Errors reported to Philips will be adapted and
published on the Philips support website as soon as possible.
Digital Content Issues
• See the supplied separate Connected Planet guide,Annex 4: Supported file formats
Portable Memory Issues
• The following memory cards are supported by the digital media reader:
- CompactFlash Card (Type I & II) (CF)
- IBM Microdrive
- Memory Stick + Memory Stick Pro
- SecureDigital Card (SD)
- SmartMedia Card (SM)
- MultiMedia Card (MMC)
• XC cards are supported through an external XD compatible card reader (not supplied with the TV)
connected to the USB connector.The same holds for other future memory cards.
• Do not apply excessive force when inserting a memory card into the digital media reader. If the memory
card doesn’t fit or isn’t detected by the TV, try to flip over the card and re-insert it.
• When inserting multiple cards at the same time some card combinations will work. It is however
recommended to insert maximum one memory card at the same time.
Digital Camera Issues
If a USB connection between your digital camera and the TV isn’t working, you can try the solutions below
to resolve your problem.
• Make sure your digital camera is switched on and verify if the configuration of your digital camera is
correct (see the manual of your digital camera for more information).
• Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface is
switched on before connecting to the TV.
• Remove the memory card from your digital camera and insert it directly into the digital media reader on
the right side of your TV.
• If you have a digital camera with only internal memory (no removable memory) you can try to copy the
content manually to a memory card or a USB memory device using a personal computer.
• Some digital cameras allow you to switch between PTP (Picture Transfer Protocol) or “PC Link” and USB
Mass Storage or “PC Drive”. Make sure that you select USB Mass Storage or “PC Drive” on your digital
camera.
• If your camera supports different interface settings be sure to try them one by one or contact the reseller
of your camera to find out the correct setting.
USB Memory Device Issues
• Devices connected to the USB port of your TV must be “Mass Storage Class” compliant. If your device
(digital camera. MP3 player, portable harddisk, …) is not “Mass Storage Class” compliant it will not be
detected by the content browser of the TV.
• The following subsets of the Mass Storage Class specification are supported:
- The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class Specification
Overview” (v1.2, June 23, 2003) including all documents referenced by the document. The document can
be found on the USB standardisation website (www.usb.org).
- Full support of the USB Mass Storage Class Bulk-Only Transport (bInterfaceProtocol = 50h).
- Full support of SubClass Code = 05h; SFF-8070i spec.
- Full support of SubClass Code = 06h; SCSI transparent command set.
• For large USB memory devices, when you are in the Content Browser, it may take a long time before you
can access your files.
• When using a USB portable harddisk: Due to the high power consumption of the harddisk, it is advised
to use the external power supply of the portable harddisk to guarantee proper working under all
conditions.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 66
Annex 4 - Issues referring to connected peripherals with a HDMI connector
EN
The HDMI IN connector allows the following TV and monitor display modes:
HD Standard Definition TV (SDTV)
Enhanced Definition TV (EDTV)
High Definition TV (HDTV)
640x480i
720x480i
720x576i
640x480p
720x480p
720x576p
1920x1080i
1280x720p
PC VGA
SVGA
640x480
800x600
1024x768
XGA
-
-
If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from
a peripheral equipment connected to the HDMI input, the Digital audio output signal is muted.
Proper working is only guaranteed with HDMI compliant consumer products. Limit the cable length
to maximum 5 m.
In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then
on again.
-
-
Sound interruptions using HDMI to HDMI connection
In case of persistent sound interruptions, connect an extra audio cable from your connected peripheral
to your TV.
Extra analogue audio cable:
Extra digital audio cable:
AUDIO OUT
DISPLAY SYNCHRONIZED
HDMI 2
DIGITAL
AUDIO
OUT
AUDIO
OUT
R
L
DIGITAL
AUDIO
IN
AUDIO
Pr
R
L
IN
o
o
o
o
Y
Pb
HDMI 1
HDMI 2
AUDIO IN L/R
PC-VGA
HDTV
&
Progressive
480p, 576p, 720p, 1080i
EXT3
HDMI
DIGITAL
AUDIO
IN
2
o
o
o
o
HDMI
1
HDMI
2
AUDIO IN L/R
PC-VGA
1
1. Connect your peripheral equipment with
the HDMI 2 connector 1.
2. Connect the analogue audio output of your
peripheral equipment to the AUDIO L/R
input of your TV 2.
1. Connect your peripheral equipment with the
HDMI 1 or 2 connector 1.
2. Connect the digital audio output of your
peripheral equipment to the DIGITAL AUDIO
IN input of your TV 2.
3. Select the equipment you have connected
in the Installation menu, Select your
connections, p. 33, and link it to HDMI 2.
4. Also select AUDIO IN L/R in the same
Connections menu.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33, and link it to HDMI 1 or 2.
4. Also select DIGITAL AUDIO IN in the same
Connections menu.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 67
Index
EN
active control ........................... 18 first time installation............... 10 select your connections......... 33
ambilight......................................21 select connected equipment. 56
analogue: manual installation. 30 game...................................... 47,51 set code..................................... 26
antenna......................................... 4 settings assistant...................... 11
audio receiver .......................... 54 HDMI connector..................... 51 side connectors ....................... 47
audio equipment keys............. 57 headphone................................. 47 sharpness................................... 16
auto format............................... 18 headphone volume.................. 20 sleeptimer ................................. 25
automatic installation.............. 29 hearing impaired...................... 28 slideshow format..................... 63
avl (audio volume leveller)..... 20 home cinema amplifier........... 54 software upgrade ............... 35,60
hue.............................................. 16 sound adjustment menu......... 19
balance....................................... 19 hypertext................................... 44 standard settings...................... 15
batteries ................................ 4, 68
standby key.................................. 5
brightness.................................. 16 installation menu...................... 28 store channels.......................... 29
subtitles...................................... 24
camera ....................................... 47 language preferences............... 28 surround mode........................ 20
camcorder................................. 47 location...................................... 32 switch the TV on........................ 9
care of the screen ..................... 2
change code ............................ 26 manual installation................... 30 teletext ...................................... 43
channel list........................... 12,31 menu key................................... 12 teletext menu........................... 44
child lock................................... 25 MPEG reduction ...................... 18 teletext 2.5................................ 32
clock ............................................. 8 multimedia browser................ 39 time zone selection................. 29
colour......................................... 16 mute key...................................... 5 tint .............................................. 16
colour enhancement............... 18
T.O.P. teletext pages................ 43
colour keys.................................. 5 navigate through the menus.. 12 troubleshooting........................ 58
common interface slot...... 27,55
comp. video connectors.....50,52 on screen language.................. 10
tv menu settings ...................... 14
connections............................... 46 on screen information.............. 6 uninstall...................................... 31
contrast ..................................... 16 on timer..................................... 26 usb connector.......................... 47
country selection..................... 29 option key ................................... 7 usb device.................................. 39
cursor keys.................................. 5 OK key......................................... 5
custom tint................................ 17
video equipment keys............. 57
PC............................................... 52 volume...........................................5
decoder...................................... 34 picture adjustment menu....... 16 VCR............................................ 49
delta volume............................. 20 picture format.......................... 18
demo .......................................... 27 PIN code ................................... 26
digital audio language.............. 19 pixel plus.................................... 17
digital natural motion ............. 17 preferences menu.................... 32
digital subtitle language .......... 24 preferred audio language ....... 28
digital teletext .......................... 45 preferred subtitle language.... 28
digital: test reception .............. 30 previous channel........................ 6
digital TV...................................... 9 programme title....................... 32
DNR........................................... 18
dual I/II....................................... 20 quick access menu..................... 7
DVB-T .......................................... 9
DVD player............................... 51 radio channels.......................... 29
DVD recorder.......................... 50 rear panel overview................ 48
DVI connector.................... 51,53 rearrange channel list ............. 31
dynamic contrast..................... 17 record a TV programme........ 56
recycling..................................... 68
EPG ........................................... 37 reinstall ...................................... 31
equalizer .................................... 19 remote control........................... 5
euroconnector.............. 49,50,54 reset factory settings.............. 34
rename....................................... 31
factory settings......................... 34 reshuffle..................................... 31
favourite key............................. 36
favourite channel list............... 36 safety warnings........................... 2
features adjustment menu..... 24 satellite receiver ...................... 52
fine tune..................................... 30 search for channels................. 28
67
Download from Www.Somanuals.com. All Manuals Search And Download.
2504.4 en 13-12-2006 08:29 Pagina 68
Recycling
EN
Recycling
Disposal of batteries
The batteries supplied do not contain the heavy
metals mercury and cadmium. Please check on
how to dispose of exhausted batteries according
to local regulations.
R The packaging of this product is intended to
be recycled.Apply to the local authorities for
correct disposal.
Disposal of your old product
Your product is designed and manufactured with
highly quality material and components, which can
be recycled and reused.
When this crossed-out wheeled bin
symbol is attached to a product, it
means the product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products. Please act according to your local rules
and do not dispose of your old products with
your normal household waste.
The correct disposal of your old product will help
prevent potential negative consequences for the
environment and human health.
Product information
- Your TV consumes energy in standby mode. Energy consumption contributes to air and
water pollution.Very low standby power consumption.
- If you need further assistance, please call the customer support service in your country.
The corresponding telephone numbers and addresses are given in the supplied Worldwide guarantee
booklet.
België / Belgique
070 222 303
Ireland
01 601 1777
Portugal
2 1359 1442
€0.17/min
Local
€0.25/min
Local
Local
Danmark
Italia
199 404 041
Schweiz / Suisse / Svizzera
0844 800 544
3525 8759
Local
Local
Deutschland
0180 5 356 767
Luxembourg
40 6661 5644
Svenska
08 5792 9100
€0.12/min
Local
France
08 9165 0005
Nederland
0900 8407
Suomi
09 2311 3415
€0.23/min
€0.20/min
Local
Local
Norge
2270 8111
United Kingdom
0906 1010016
E§§A™
£0.15/min
0 0800 3122 1280 ¢ˆÚ¿Ó
Österreich
España
0820 901114
€0.20/min
902 888 784
€0.15/min
68
Download from Www.Somanuals.com. All Manuals Search And Download.
2492.3 EN 24-02-2006 15:55 Pagina 1
GB
Contents
What is Connected Planet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What you need to enjoy Connected Planet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Step 1: Installing the Philips Media Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Step 2: Identifying your network configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Step 3: Connecting and configuring your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Step 4:Viewing multimedia content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
What is Connected Planet ?
Connected Planet provides easy access to digital pictures, video and music files on your PC.
Please read the following instructions carefully and follow very closely and step by step the
instructions.
What do you need to enjoy Connected Planet ?
& A network connection to your PC.
é Install the Philips Media Manager (PMM) from the supplied
CD on your PC.
More extended instructions on the installation and use of Connected Planet can be found on the
extended manual on the supplied CD.
If you have problems or questions or if you feel you don’t have sufficient knowledge about
PC connectivity and PC networking, please contact your PC orTV retailer to assist you.
!
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2492.3 EN 24-02-2006 15:55 Pagina 2
Step 1: Installing the Philips Media Manager (PMM)
& Insert the supplied
CD into your
computer’s CD drive.
If the CD does not start automatically, double-click My
Computer, then the CD-ROM drive icon and finally
start.htm to start the CD.
é Please select your language, click on Install Media
Manager and follow the on-screen instructions.
Notes:
- If the screen Product Configuration appears, DO NOT
tick WMA (Windows Media Audio) or WMV (Windows
Media Video), as our TV does not support those
contents.
- You can install the PMM on more than one computer
in your home network.
- Make sure that the PMM is not blocked by the firewall
installed on your PC.
“ Select your PMM menu language.
You can select among a few available languages in the
Settings menu.
‘ Change the PMM server name
You can change the name of the PMM Server in the
PMM Settings menu.This server name is important
as it will be displayed on your TV when the PMM is
detected. Possible names are “PC Study”,“PC John”,
“PC bedroom”.
( Restart your PC after installing the PMM.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2492.3 EN 24-02-2006 15:55 Pagina 3
Adding files in the Philips Media Manager (PMM)
& Select the PMM from your Windows Start-menu or
double-click on the PMM symbol
in the task bar.
é Click on Music, Pictures or Movies at the top of
the PMM window.
“ Select Add Music, Add Pictures or Add Movies.
‘ Click on Add Files or Folders... .
( Select a folder or one or more media files and click
on Open to add the selected folder or files to the
Media Manager window.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2492.3 EN 24-02-2006 15:55 Pagina 4
Step 2: Identifying your PC configuration
We will focus on the two main PC configurations found in modern households today.
OR
Configuration A
Configuration B
If feasible we advise to set up a router-based
network as described in Configuration A before
connecting your TV.
Before connecting yourTV
Before connecting yourTV
You have
You have
• a router
• a PC with a free Ethernet connector.
Note: If you don’t have a free Ethernet
connector on your PC you will have to buy and
install an extra Ethernet card.
• one or more PCs connected to the router
• one free Ethernet connector on the router
Go to Connecting and configuring your TV,
Configuration B, p. 5.
Go to Connecting and configuring your TV,
Configuration A, p. 5.
Connecting yourTV to a single PC
requires a special crossed network
cable.
!
* Ethernet: Ethernet is a well-established local area networking standard, and is incorporated into (or
available) for most computers.
* Router:
A device that does the interconnecting of networks. Its job is to coordinate and filter
traffic between the networks. (E.g. your home network and the Internet.)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2492.3 EN 24-02-2006 15:55 Pagina 5
Step 3: Connecting and configuring your TV
Configuration A
Configuration B
Make sure DHCP/Auto IP (automatic network
addressing) is enabled on your router and your
PCs.
Make sure DHCP/Auto IP (automatic network
addressing) is enabled on your PC.
On most of the recently purchased PCs,
automatic network addressing is already
enabled.
On most of the recently purchased PCs and
routers, automatic network addressing is
already enabled.
You can check this on your PC with the Network
You can check this on your PC with the Network
Utility on the supplied
CD.
Utility on the supplied
CD.
Connecting yourTV
Connecting yourTV
& Push one end of a crossed Ethernet cable (a
crossed cable) into the NETWORK connector
at the bottom of the TV.
& Push one end of an Ethernet cable (a straight
cable) into the NETWORK connector at the
bottom of the TV.
Warning !
Crossed cable
Straight cable
é Push the other end into the free network
é Push the other end into a free Ethernet
connector on your PC.
connector on your router.
“ Go to ‘Viewing multimedia content’ on p. 6 to
“ Go to ‘Viewing multimedia content’ on p. 6 to
test your connection.
test your connection.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2492.3 EN 24-02-2006 15:55 Pagina 6
Step 4:Viewing multimedia content
Make sure the PC with Philips Media Manager installed on it
(see p. 2) is switched on.
& Switch on your TV.
é Press the BROWSE/MENU key on the remote control to
display the Browse menu.
“ Select your PC from which you want to access the content and
press the cursor right.
Televisie
TV-menu
a
TV-zenders
Programmagids
Multimedia
Media servers
Note: It may take up to 2 minutes after switching on the TV before
your PC appears in the Browse menu.
‘ Use the cursor keys to navigate through the Pictures, Music,
Video files or folders.
folder
v
picture file
music file
video file
( Press the OK key to play the content.
§ Press the cursor left to display the content list again.
Multimedia browser functional keys:
‡
†
Ò
to stop playing your content
for fast forward
for rewind
π
-P+
for play, for pause
to go to the next or previous media file
to make subtitles visible
cursor up/down
For supported file formats, see the extended instructions on the
CD supplied.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|