Register your product and get support at
PFL50x8H/12
PFL50x8K/12
PFL50x8T/12
PFL50x8T/60
PFL50x8M/08
EN User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
To disconnect the TV from the mains
power, the power plug of the TV must
be disconnected. When disconnecting
the power, always pull the power plug,
never the cord. Ensure that you have
full access to the power plug, power
cord and outlet socket at all times.
1 Important
Safety
Precautions
Risk of damage to the TV!
Read and understand all instructions before
you use your TV. If damage is caused by
failure to follow the instructions, the
warranty does not apply.
Two people are required to lift and
carry a TV that weighs more than 25kg
or 55lbs.
When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat,
level surface that can support the
combined weight of the TV and the
stand.
When wall mounting the TV, use only a
wall mount that can support the weight
of the TV. Secure the wall mount to a
wall that can support the combined
weight of the TV and wall mount. TP
Vision Netherlands B.V. bears no
responsibility for improper wall
mounting that result in accident, injury
or damage.
Risk of electric shock or fire!
Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilled
on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips Consumer Care to have
the TV checked before use.
Never place the TV, remote control or
batteries near naked flames or other
heat sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
If you need to store the TV,
disassemble the stand from the TV.
Never lay the TV on its back with the
stand installed.
Before you connect the TV to the
power outlet, ensure that the power
voltage matches the value printed on
the back of the TV. Never connect the
TV to the power outlet if the voltage is
different.
Never insert objects into the ventilation
slots or other openings on the TV.
Never expose the remote control or
batteries to rain, water or excessive
heat.
Parts of this product may be made of
glass. Handle with care to avoid injury
and damage.
Avoid force coming onto power plugs.
Ensure that the power plug is fully
inserted into the power socket. Loose
power plugs can cause arcing or fire.
When the TV is swivelled, ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of injury to children!
Follow these precautions to prevent the TV
from toppling over and causing injury to
children:
Never place the TV on a surface
covered by a cloth or other material
that can be pulled away.
Ensure that no part of the TV hangs
over the edge of the surface.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Never place the TV on tall furniture,
such as a bookcase, without anchoring
both the furniture and TV to the wall
or a suitable support.
Educate children about the dangers of
climbing on furniture to reach the TV.
To avoid discomfort such as dizziness,
headache or disorientation, we
recommend not watching 3D for
extended periods of time. If you
experience any discomfort, stop
watching 3D and do not immediately
engage in any potentially hazardous
activity (for example driving a car) until
your symptoms have disappeared. If
symptoms persist, do not resume
watching 3D without consulting a
medical professional first.
Risk of swallowing batteries!
The product/remote control may
contain a coin-type battery, which can
be swallowed. Keep the battery out of
reach of children at all times!
Risk of overheating!
Parents should monitor their children
during 3D viewing and ensure they do
not experience any discomfort as
mentioned above. Watching 3D is not
recommended for children under six
years of age as their visual system is not
fully developed yet.
Do not use the 3D glasses for any
purpose other than watching this 3D
TV.
Never install the TV in a confined
space. Always leave a space of at least 4
inches or 10 cm around the TV for
ventilation. Ensure that curtains or
other objects never cover the
ventilation slots on the TV.
Risk of injury, fire or power cord damage!
Never place the TV or any objects on
the power cord.
Disconnect the TV from the socket and
aerial before lightning storms. During
lightning storms, never touch any part
of the TV, power cord or aerial cable.
Care
Screen
Risk of hearing damage!
Risk of damage to the TV screen!
Never touch, push, rub or strike the
screen with any object.
Avoid using earphones or headphones
at high volumes or for prolonged
periods of time.
Unplug the TV before cleaning.
Clean the TV and frame with a soft
damp cloth and wipe gently. Avoid
touching the Ambilight LEDs on the
rear of the TV. Never use substances
such as alcohol, chemicals or household
cleaners on the TV.
Low temperatures
If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting
the TV to the power outlet.
To avoid deformations and colour
fading, wipe off water drops as soon as
possible.
3D health warning
For 3D TVs only.
Avoid stationary images as much as
possible. Stationary images are images
that remain onscreen for extended
periods of time. Stationary images
include onscreen menus, black bars,
time displays, etc. If you must use
stationary images, reduce screen
contrast and brightness to avoid screen
damage.
If you or your family have a history of
epilepsy or photosensitive seizures,
consult a medical professional before
exposing yourself to flashing light
sources, rapid image sequences or 3D
viewing.
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3D glasses
Lock the TV
For sets with 3D glasses supplied.
Your TV is equipped with a Kensington
security slot at the base of the TV. To secure
the TV, purchase a Kensington anti-theft lock
(sold separately).
Follow these instructions to take care of
your glasses:
Use a clean soft cloth (microfibre or
cotton flannel) to clean the lenses to
avoid scratching them. Never spray
cleaner directly on the 3D glasses. You
can use pre-moistened cleaning cloths
from most well-known lens
manufacturers of sunglasses.
Do not expose the 3D glasses to direct
sunlight, heat, fire or water. This may
result in a product malfunction or fire.
Do not drop, bend or apply force to
the lenses of the 3D glasses.
Do not use cleaning chemicals
containing alcohol, solvent, surfactant,
or wax, benzene, thinner, mosquito
repellent or lubricant. Using these
chemicals can cause discolouration or
cracks.
Placement tips
Legal
Position the TV where light does not
shine directly on the screen.
Notice
The ideal viewing distance of this TV is
three times its diagonal screen size. For
example, if the diagonal screen size of
the TV is 81 cm / 32", the ideal viewing
distance is ~2.5 m / ~92" from the
front of the screen.
2013 © TP Vision Netherlands B.V. All rights
reserved. Specifications are subject to change
without notice. Trademarks are the property
of Koninklijke Philips Electronics N.V or their
respective owners. TP Vision Netherlands
B.V. reserves the right to change products at
any time without being obliged to adjust
earlier supplies accordingly.
While seated, your eyes should be level
with the centre of the screen.
TV placement
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other
than those specified herein, confirmation of
their validity and suitability must be obtained.
TP Vision Netherlands B.V. warrants that the
material itself does not infringe any United
States patents. No further warranty is
expressed or implied.
You can apply the best sound settings for
your TV by selecting the TV placement (wall
mount or stand mount).
1. Press
.
2. Select [Setup], then press OK.
3. Select [TV settings] > [General settings]
or [TV placement].
4. Select [On a TV stand] or [Wall
mounted], then press OK.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TP Vision Netherlands B.V. cannot be held
responsible neither for any errors in the
content of this document nor for any
problems as a result of the content in this
document. Errors reported to Philips will be
adapted and published on the Philips support
website as soon as possible.
One of Philips’ leading Business Principles is
to take all necessary health and safety
measures for our products, to comply with
all applicable legal requirements and to stay
well within the Electro Magnetic Field (EMF)
standards applicable at the time of producing
the products.
Terms of warranty
Philips is committed to develop, produce
and market products that cause no adverse
health effects. TP Vision confirms that, as
long as its products are handled properly for
their intended use, they are safe to use
according to scientific evidence available
today.
Risk of injury, damage to TV or void of
warranty! Never attempt to repair the
TV yourself.
Use the TV and accessories only as
intended by the manufacturer.
The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Care for
service or repairs.
Philips plays an active role in the
development of international EMF and safety
standards, enabling Philips to anticipate
further developments in standardisation for
early integration in its products.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not
Open source
recommended or authorised in this
manual, shall void the warranty.
This product contains software licensed
under an open-source licence. For
acknowledgments and licence texts, please
refer to the electronic in-product user
manual. TP Vision Netherlands B.V. hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages
used in this product for which such offer is
requested by the respective licences.
Pixel characteristics
This LCD/LED product has a high number of
colour pixels. Although it has effective pixels
of 99.999% or more, black dots or bright
points of light (red, green or blue) may
appear constantly on the screen. This is a
structural property of the display (within
common industry standards) and is not a
malfunction.
This offer is valid up to three years after
product purchase to anyone in receipt of this
information. To obtain source code, please
send your request in English with product
number to:
CE compliance
This product is in compliance with the
essential requirements and other relevant
provisions of Directives 2006/95/EC (Low
Voltage), 2004/108/EC (EMC) and
2011/65/EU (ROHS).
"Intellectual Property Department, TP Vision
Netherlands B.V., P.O. Box 80077, 5600 KA
Eindhoven, The Netherlands."
Compliance with EMF
TP Vision Netherlands B.V. manufactures
and sells many products targeted at
consumers which, like any electronic
apparatus, in general have the ability to emit
and receive electromagnetic signals.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified® device must be registered in
order to play purchased DivX Video-on-
Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD
section in your device setup menu. Go to
vod.divx.com for more information on how
to complete your registration.
Trademarks and copyrights
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
Manufactured under licence from Dolby
Laboratories. Dolby and the double D
symbol are trademarks of Dolby
Laboratories.
Skype is a trademark of Skype Limited or its
related companies.
PlayReady Final Products
The terms HDMI and HDMI High-Definition
Multimedia Interface and the HDMI Logo are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
Content owners use Microsoft PlayReady™
content access technology to protect their
intellectual property, including copyrighted
content. This device uses PlayReady
technology to access PlayReady protected
content and/or WMDRM-protected content.
If the device fails to properly enforce
restrictions on content usage, content
owners may require Microsoft to revoke the
device’s ability to consume PlayReady-
protected content. Revocation should not
affect unprotected content or content
protected by other content access
Kensington and Micro Saver are registered
US trademarks of ACCO World
Corporation with issued registrations and
pending applications in other countries
throughout the world.
technologies. Content owners may require
you to upgrade PlayReady to access their
content. If you decline an upgrade, you will
not be able to access content that requires
the upgrade.
DLNA®, the DLNA Logo and DLNA
CERTIFIED® are trademarks, service marks
or certification marks of the Digital Living
Network Alliance.
All other registered and unregistered
trademarks are the property of their
respective owners.
Covered by one or more of the following
U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274.
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
Sustainability
Energy efficiency
DivX Certified® to play DivX® video up to
HD 1080p, including premium content.
This TV is designed with energy-efficient
features. To access these features, press the
Green button on the remote control.
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an
official DivX Certified® device that plays
DivX video. Visit divx.com for more
information and software tools to convert
your files into DivX videos.
Energy saving picture settings: You can
apply a combination of energy saving
picture settings. While you watch TV,
press the Green button and select
[Energy saving]. Then select the
[Energy saving] picture setting.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Recycling
Screen off: If you only want to listen to
audio from the TV, you can switch off
the TV display. Other functions
continue to operate normally. While
you watch TV, press the Green button
and select [Screen off].
Light sensor: When the surrounding
light darkens, the built-in ambient light
sensor lowers the brightness of the TV
screen. To switch on the sensor, press
the Green button while you watch TV
and select [Light sensor].
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Low standby power: The advanced
power circuitry reduces the power
consumption of the TV to an extremely
low level, without losing the constant
standby functionality.
Auto switch off: To conserve energy,
set the TV to switch off automatically
after a period of inactivity. While you
watch TV, press the Green button and
select [Auto switch off]. Then select
the period after which the TV switches
off.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European
Directive 2002/96/EC. Please inform yourself
about the local separate collection system
for electrical and electronic products.
Switch off inactive devices: Switch off
connected EasyLink HDMI-CEC
(Consumer Electronic Control)
compliant devices that are inactive.
While you watch TV, press the Green
button and select [Inactive devices off].
Please act according to your local rules and
do not dispose of your old products with
your normal household waste. Correct
disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Power management: An advanced
power management helps save the
energy consumed by this TV. To view
how your personalised TV settings
affect the TV's relative power
consumption, press , then select
[Setup] > [Watch demos] > [Active
Control demo].
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Download a printable PDF version of
this user manual
Email us a specific question
Chat online with Philips Consumer
Care (available in certain countries
only)
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal
household waste. Please inform yourself
about the local rules on separate collection
of batteries because correct disposal helps to
prevent negative consequences for the
environment and human health.
Use the Philips connectivity guide
An easy-to-use connectivity guide gives you
guidance on how to connect your TV to
other devices. Visit
Search the TV forum
Your question may have already been
answered by the Philips TV community of
Energy label
Contact Philips
The European Energy Label informs you on
the energy efficiency class of the product.
The greener the energy efficiency class of
this product is, the lower the energy it
consumes.
You can contact Philips Consumer Care in
your country for support. The number is
available in the leaflet accompanying this
product or online at
On the label, you can find the energy
efficiency class, the average power
consumption of the product in use and the
average energy consumption for 1 year. You
can also find the power consumption values
for the product on the Philips website for
Before you contact Philips, write down the
model and serial number of your TV. You
can find this information on the back of your
TV or on the TV packaging.
Help and support
Use Help
To access the onscreen [Help] menu, press
the Blue button.
To exit from the [Help] menu, press
.
Visit the Philips website
If you can't find what you need in the
onscreen [Help], visit the Philips support
On the Philips support website, you can also:
Find answers to Frequently Asked
Questions (FAQ)
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Standby indicator LED and remote
control sensor
The standby LED indicates when your TV is
in standby. Point the remote control at the
sensor. Make sure that the line of sight
between the remote control and the TV is
not blocked.
2 Use your TV
TV controls
Rear controls
Remote control
1. (Standby): Switch the TV on or to
standby.
2. Play buttons: Control playback of
multimedia files.
3. GUIDE: Access TV guide.
4. 3D: Switch on 3D.
5.
SOURCE: Watch a connected device.
1. (Standby): Switch the TV on or off.
2. CH +/-: Switch to the next or previous
channel.
6. AMBILIGHT: Switch Ambilight on or off.
7.
8.
TV: Watch TV.
FORMAT: Change picture format.
3.
(SOURCE): Watch a connected
device.
4.
+/- (Volume): Increase or decrease
volume.
Sensors and indicators
9. (Home): Access the Home menu.
10. OK: Confirm an entry or selection.
11. SMART TV: Access Smart TV.
12.
(Navigation buttons): Navigate
through menus and select items.
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EasyLink controls
If you connect your TV to HDMI-CEC
enabled devices, such as a Blu-ray player or
home theatre, you can control them at the
same time with one remote control. Simply
switch on EasyLink after connection.
Read more about Easylink in Connect your
TV > Set up Easylink devices > Control
13. LIST: Access the TV channel list.
14. EXIT: Exit menus or TV functions.
On-screen remote control
You can also control connected HDMI-CEC
enabled devices through other buttons that
are available through the on-screen remote
control. Make sure that Easylink is switched
on after connection. Read more about
Easylink in Connect your TV > Set up
Easylink devices > Control devices (Page
15.
INFO: Display information about
current activity.
16. OPTIONS: Access currently available
options, picture and sound menus.
To access the on-screen remote control
1. While you watch a connected device,
press OPTIONS.
2. Select [Show remote control], then press
OK.
3. Select an on-screen button, then press
OK.
17. (Back): Return to the previous menu
page or exit from a TV function.
18. CH - / CH +: Switch channels.
19. +/- (Volume): Adjust volume.
Smartphone control
With the smartphone application 'Philips
MyRemote', you can use your smartphone
as a secondary remote and even as a
20.
(Mute): Mute or restore audio.
keyboard. You can also watch a slideshow of
the images in your smartphone on the TV.
Note: Make sure that your TV and
smartphone are connected to the same local
network. For more information, see
Connect your TV > Connect to a network
21. Colour buttons: Select tasks or options.
22. SUBTITLE: Enable or disable subtitles.
23. 0-9 (Numeric buttons): Select TV
channels or enter text.
Follow these instructions to download the
application 'Philips MyRemote':
1. Visit the Apple App store or Google Play
to download the application 'Philips
MyRemote' on your smartphone.
24. TEXT: Enable or disable teletext.
2. Follow the instructions provided at the
applications store.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic switch off
Watch TV
You can save energy with this TV's energy
efficiency settings, which are enabled by
default. If there is no user interaction (such
as pressing a remote control button or a
control on the TV) for four hours, the TV
will automatically switch to standby.
Switch TV on or off
To disable automatic switch off
1. While you watch TV, press the Green
button on the remote control.
2. Select [Auto switch off], then press OK.
3. Use the Navigation buttons to make a
selection, then press OK.
Adjust TV volume
Switch the TV on
Connect the TV to the mains outlet
and switch on the main power.
If the TV is not switched on, the
standby LED remains off. Press on
the TV.
If the standby LED is lit, press on the
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press any key on the TV.
Increase or decrease the TV volume
Press +/- on the remote control.
Press +/- on the TV.
Switch TV to standby
Press on the remote control.
The standby LED on the TV switches to red.
Switch off the TV
Press on the TV.
The standby LED switches to off.
Mute or restore the TV volume
Press
mute the volume.
Press again to restore the volume.
on the remote control to
Adjust headphone volume
1. Press
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
.
2. Select [Setup] > [TV settings] > [Sound]
> [Headphone volume], then press OK.
3. Select a level.
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch TV channels
Manage channel lists
After the channels are installed, you can:
Filter channels.
Switch between antenna and cable
channels.
Rename channels.
Reorder channels.
Lock a channel.
Listen to digital radio.
Filter channels
1. While you watch TV, press LIST.
2. Press OPTIONS, then select [Filter].
3. Select an option, then press OK.
[Digital + Analogue]: Display all
channels in the channels list.
[Digital TV channels]: Display only
digital channels.
[Analogue Channels]: Display only
analogue channels.
[Free / scrambled]: Display all channels
in the channels list.
[Scrambled channels]: Display only
scrambled channels.
[Free channels]: Display only free
channels.
Press CH +/- on the remote control or
TV.
Press the Numeric buttons on the
remote control to enter a channel
number.
Manage favourite channels
You can view all channels or only a list of
your favourite channels.
Note: The filtering options may vary
according to your broadcaster.
Create a list of your favourite channels
1. Press LIST.
The channel list is displayed.
2. Select the channel to mark as favourite,
then press OPTIONS.
Switch between antenna and cable channels
You can switch between antenna and cable
channels while you are watching TV.
1. While you watch TV, press
.
3. Select [Add/remove favourites], then
press OK.
The selected channel is marked with an
asterisk.
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Antenna
connection].
3. Select [Antenna (DVB-T)] to watch
antenna channels or [Cable (DVB-C)] to
watch cable channels, then press OK.
To remove a channel from the favourites list,
select [Add/remove favourites], then press
OK.
Rename channels
Display your list of favourite channels
When you select a channel, its name
appears. You can change this channel name.
1. Press LIST, then press OPTIONS.
2. Select [List] > [Favourites] to display
channels in the favourite list.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Select the channel to rename, then select
OPTIONS.
3. Press OK to confirm.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select [Rename], then press OK.
The onscreen keyboard is displayed.
4. Press the Navigation buttons to select
each character, then press OK.
5. Once complete, select [Done], then press
OK to confirm.
Select a device with SOURCE
1. Press SOURCE.
2. Select a device, then press OK.
Select a device from the Home menu
1. Press
.
2. Select [Source], then press OK.
Reorder channels
3. Select the device, then press OK.
After the channels have been installed, you
can reorder the channel list.
To add or manage your connected devices,
see Connect your TV > Watch connected
1. While you watch TV, press LIST.
The channel list is displayed.
2. Press OPTIONS.
Use picture and sound presets
3. Select [Reorder], then press OK.
Your TV comes with predefined picture and
sound settings. You can apply these settings
or customise them.
4. Select the channel to reorder, then press
OK.
5. Press the Navigation buttons to move the
highlighted channel to another location, then
press OK.
6. Once complete, press OPTIONS.
7. Select [Exit reorder], then press OK.
Select your preferred picture settings
1. While you watch TV, press OPTIONS.
2. Select [Picture and sound] > [Picture
style], then press OK.
3. Select an option, then press OK:
Lock a channel
You can prevent unauthorised access to
channels by locking them.
[Personal]: Apply your personalised
picture settings.
[Vivid]: Rich and dynamic settings, ideal
for daytime viewing.
1. While you watch TV, press LIST.
[Natural]: Natural picture settings.
[Standard]: Default settings that suit
most environments and types of video.
[Movie]: Ideal settings for movies.
[Photo]: Ideal settings for photos.
[Energy saving]: Settings that conserve
the most energy.
The channel list is displayed.
2. Select the channel to lock, then press
OPTIONS.
3. Select [Lock channel], then press OK.
4. If prompted, enter the PIN code.
The channel is marked with a lock icon in
the channel list.
Select your preferred sound settings
1. While you watch TV, press OPTIONS.
2. Select [Picture and sound] > [Sound
style], then press OK.
Tip: To watch a locked channel, enter the
PIN code when prompted.
Listen to digital radio
If digital radio channels are available, you can
listen to them. They are installed
automatically when you install the TV
channels.
3. Select an option, then press OK:
[Personal]: Apply your personalised
sound settings.
[Original]: Settings that suit most
environments and types of audio.
[Movie]: Ideal settings for movies.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Press OPTIONS.
3. Select [Filter] > [Radio], then press OK.
4. Select a radio channel, then press OK.
[Music]: Ideal settings for listening to
music.
[Game]: Ideal settings for games.
[News]: Ideal settings for spoken audio,
such as the news.
Watch connected devices
Before you can watch a device, connect the
device to the TV. See Connect your TV >
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Change picture format
From the broadcaster
Select broadcaster programme guide
Before you use the programme guide, check
the following settings:
You can change the picture format to suit
the video source.
1. Press
FORMAT.
1. Press
.
2. Select a picture format, then press OK.
2. Select [Setup] > [TV settings] > [General
settings] > [TV guide].
The available picture formats depend on the
video source:
3. Select [From the broadcaster], then
pressOK.
[Auto fill]: Adjust the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.
[Auto zoom]: Enlarge the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.
[Super zoom]: Remove the black bars
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.
[Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or
PC.
[Wide screen]: Shows widescreen
format content unstretched. Not
recommended for HD or PC.
Access broadcaster programme guide
1. Press
.
2. Select [TV guide], then press OK.
3. If you are viewing the programme guide
for the first time, follow the onscreen
instructions to update the guide.
Customise broadcaster programme guide
You can customise the displayed information
to:
Remind you when programmes start.
Display only preferred channels.
Change day of display.
Schedule recordings of programmes.
See Use more of your TV > Record
TV shows > Schedule recordings
[Unscaled]: Provide maximum detail for
PC. Only available when PC mode is
selected in the Picture menu.
(Page 26).
Note: Options may vary according to the
programme information available from the
broadcaster.
[4:3]: Display the classic 4:3 format.
1. In the programme guide, press
OPTIONS.
View programme guide
2. Select an option, then press OK:
What you can do
[Acquire EPG data]: Update
programme guide information.
[Change day]: Select the day to display
programme guide.
[Search by genre]: Search programmes
by genre.
You can view channel schedules and
programme synopses for digital TV channels
using programme guides provided by the
broadcasters. The availability of programme
guides is dependent on your broadcaster.
[All reminders]: Display a list of all
programme reminders.
You can view programme guides through
one of two methods:
From the broadcaster
From the Internet
From the Internet
Make sure that your TV is connected to the
Internet through a high-speed broadband
connection. See Connect your TV >
Connect to a network and the Internet
You cannot view a channel's programme
guide information if:
the age rating of the channel is equal or
higher than the age rating set on your
TV.
(Page 58).
the channel is locked.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Internet programme guide
Before you use the programme guide, check
the following settings:
Watch 3D
1. Press
.
What you need
2. Select [Setup] > [TV settings] > [General
settings] > [TV guide].
Your TV is a 3D TV. Before you watch 3D,
read the health warning information in
Important > Safety > 3D health warning
3. Select [From the Internet], then press
OK.
(Page 4).
Access Internet programme guide
To watch 3D on this TV, use the Philips Easy
3D passive glasses supplied with your TV.
Note:
1. Press
.
2. Select [TV guide], then press OK.
Note: If you are viewing the programme
guide for the first time, follow the onscreen
instructions to update the guide.
Customise Internet programme guide
You can use the programme guide to:
If you need additional glasses, purchase
the Philips Easy 3D glasses, PTA417. 3D
glasses from other brands may reduce
or lose the 3D effect.
Some 3D formats are not supported.
Schedule recordings of programmes.
See Use more of your TV > Record
TV shows > Schedule recordings
(Page 26).
Identify channels.
Select day of display.
Reload and zoom into the programme
guide information.
View security information.
Note: Options may vary according to the
programme information available from the
broadcaster.
1. In the programme guide, press
OPTIONS.
2. Select an option, then press OK:
[Record]: Set a scheduled recording.
[Identify channel]: Manually update
channel information.
[Select day]: Select the day to display.
[Manual record]: Set a scheduled
recording.
To experience the best 3D effect while you
watch 3D programmes:
Sit at a distance that is at least three
times the width (w) of the TV screen.
Do not sit more than 6 m away.
[Reload Page]: Refresh the page display.
[Zoom]: Change zoom level of page
display.
[Security info]: Display programme
security information.
Start 3D
Automatically enable 3D
The TV detects when 3D is available and
prompts you to put on your 3D glasses to
start watching. To set the TV response when
a 3D signal is detected:
1. Press
.
2. Select [Setup] > [TV settings] > [3D] >
[Switch to 3D].
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select a setting, then press OK.
To switch off 2D to 3D conversion:
1. Press 3D, then select [2D].
[Automatic]: TV switches to 3D
automatically.
[Notification only]: TV displays
notification first.
[Never]: No notification.
Note: If you switch to another activity, the
conversion stops.
To adjust the 3D depth:
1. Press OPTIONS.
2. Select [Picture and sound] > [3D effect].
3. Select an option, then press OK.
Select a source with 3D
For 3D discs:
1. Play the disc on a 3D Blu-ray disc player
that is connected to the TV HDMI
connector.
Ambilight
2. Press
SOURCE, then select the 3D
Blu-ray disc player.
What you can do
For 3D TV programmes:
1. Select [Watch TV], then switch to a TV
channel that broadcasts 3D content.
Ambilight makes watching TV more relaxing.
The light automatically changes to match the
colour and brightness of the TV picture.
Note:
To switch back to 2D, press 3D, then
select [2D].
What you need
If you switch to another channel or a
connected device, the TV switches to
2D.
Select 3D input format
The TV detects when 3D is available and
prompts you to put on your 3D glasses to
start watching. If the TV cannot detect the
3D signal due to a missing 3D signal tag, it
displays images that overlap.
For the best Ambilight effect:
Position the TV 25 cm away from the
wall.
To switch the overlapping images to 3D,
change the 3D format.
1. Press 3D.
Dim the light in the room.
2. Select a setting, then press OK.
Switch on
[3D - Side by side]: Select if the TV
displays pictures that overlap vertically.
[3D - Top / bottom]: Select if the TV
displays pictures that overlap
1. Press AMBILIGHT on the remote control.
2. To switch Ambilight on or off, select [On]
or [Off].
horizontally.
Switch on lounge light
[3D - top/bottom inverted] or [3D -
side by side inverted]: Select if the TV
displays distorted images, such as the
background appearing nearer to you.
To create a lounge light effect in your room,
switch on Ambilight while the TV is in
standby.
While the TV is in standby, press
AMBILIGHT.
Convert 2D to 3D
To toggle between Ambilight lounge
light modes, press AMBILIGHT
You can convert any 2D programme to
watch it in 3D.
1. Press 3D, then select [2D to 3D
conversion].
repeatedly.
Note: It may take more than five seconds
for the lounge light to switch on.
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Your computer connected through the
home network.
A USB device connected to the TV.
Change settings
1. While you watch TV, press
2. Select [Setup] > [TV settings] >
[Ambilight].
.
Play files from computer
What you need
3. Select a setting, then press OK.
[Mode]: Select an Ambilight mode from
[Off], [Dynamic] or [Static].
A wired or wireless home network,
connected with a Universal Plug and
Play (uPnP) router.
- [Off]: Switch off Ambilight.
- [Dynamic]: Select if you want
Optional: An LAN cable that connects
your TV to your home network.
A media server running on your
computer.
Appropriate settings on your computer
firewall to allow you to run the media
server.
Ambilight to respond to onscreen
images.
- [Static]: Select if you want to set
a specific Ambilight colour.
[Brightness]: Adjust Ambilight
brightness.
[Dynamic]: Adjust the Ambilight
response speed to the onscreen
images. Available only if the selected
Ambilight mode is [Dynamic].
Set up the network
1. Connect your TV and the computer to
the same home network. See Connect your
TV > Connect to a network and the
2. Switch on your computer and the router.
Note:
If the apparatus does not return to DLNA
mode due to external electrical disturbances
(e.g. electrostatic discharge), user
intervention is required.
[Static]: Select the Ambilight colour.
This colour is fixed and does not
respond to changes in picture display.
Available only if the selected Ambilight
mode is set to [Static].
- [Colour]: Select a predefined
Ambilight colour.
- [Custom colour]: Customise the
Ambilight colour. Available only if the
selected Ambilight colour mode is
[Custom].
[Advanced]: Select for more Ambilight
settings.
- [Wall colour]: Select the colour
of your wall to apply suitable Ambilight
settings.
Set up media sharing
1. Install a media server on your computer
to share media files. These are some media
servers:
For PC: Windows Media Player 11 (or
higher) or TVersity
For Mac: Twonky
2. Switch on media sharing on your
- [TV switch off]: Select how
Ambilight switches off when the TV is
switched to standby.
- [Lounge light mood]: Select a
predefined Ambilight colour for a lounge
light effect when the TV is switched to
standby.
computer using the media server. For more
information on how to set up the media
server, refer to the media server's website.
Play files
1. Press
SOURCE.
2. Select [Browse network], then press OK.
3. Select a file from the content browser,
then press OK to start play.
4. Press the Play buttons to control play.
5. Optional: To select a different media
server, select [Media server].
Play multimedia files
What you can do
You can play videos, photos and music on
your TV from:
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
To pause the video, press OK.
Press OK again to resume playback.
To skip forward or backward 10
seconds, press or .
To search forward or backwards, press
or . Press the button repeatedly
to toggle between different speeds.
Tips:
Select the top bar to filter your files by
type.
Select [Sort] to arrange the files by
album name, artist or other fields.
To clear the list of offline media servers,
press OPTIONS, then select [Clear
offline servers] and press OK.
To stop the video, press
.
Video options
While you play video, press OPTIONS,
then press OK to select an option:
Play files from USB device
If you have photos, videos or music files on a
USB storage device, you can play the files on
TV.
[Subtitles]: Select the available subtitle
settings.
[Subtitle language]: Select the language
Caution:
for subtitles if available.
TP Vision is not responsible if the USB
hard drive is not supported, nor is it
responsible for damage to or loss of
data in the device.
[Character set]: Select the correct
character set for the subtitles.
[Audio language]: Select an audio
language.
[Repeat]: Select [Repeat] to play the
video file repeatedly or [Play once] to
play the video file once.
Do not overload the USB port. If you
connect a USB storage device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
[Media server]: When you play content
from a media server, you can select
another media server.
Browse USB device
1. Connect the USB device to the USB
connector on the TV.
[Shuffle on] / [Shuffle off]: Enable or
disable random play of video files.
[DivX® VOD]: Display the DivX
registration and deregistration codes for
this TV.
2. Press
SOURCE, select [USB], then
press OK.
3. Select a file from the content browser,
then press OK to start play.
4. Press the Play buttons to control play.
Note:
To view information about a video (for
example, played position, duration, title or
5. Optional: To select a different USB device,
select [USB device] at the bottom of the TV
date), select the video, then press
To hide the information, press
again.
INFO.
INFO
screen.
Tips:
Select the top bar to filter your files by
type.
Listen to music
1. Select in the top bar.
2. Select a track, then press OK.
Select [Sort] to arrange the files by
name, date or other fields.
3. Optional: To play all the tracks in a folder,
Play options
Watch video
1. Select in the top bar.
2. Select a video, then press OK.
3. Optional: To play all the videos in a folder,
select a video, then select [Play all].
select a track, then select [Play all].
To skip to the next or previous track,
press CH+ or CH-.
To pause the track, press OK.
Press OK again to resume playback.
To skip forward or backward 10
seconds, press or .
To skip to the next or previous video,
press CH+ or CH -.
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
To search forward or backwards, press
or . Press repeatedly to toggle
between different speeds.
Play DivX® VOD (Video On Demand)
This TV is DivX Certified(R) and plays high-
quality DivX Video-On-Demand videos.
To stop the music, press
.
To play DivX VOD videos from a video
store or from your computer, you must first
activate DivX VOD on the TV. The DivX
VOD activation of your TV is free of charge.
Music options
While you play music, press OPTIONS,
then press OK to select an option:
[Repeat]: Select [Repeat] to play a
track or an album repeatedly, or select
[Play once] to play a track once.
[Media server]: When you play content
from a media server, you can select
another media server.
Register the TV
If the TV is not yet activated when you start
the playback of a rental DivX video, the TV
displays the DivX registration code to
activate this TV.
[Shuffle on] / [Shuffle off]: Enable or
To register, follow these steps.
disable random play of tracks.
Note:
1. When the TV displays the 8 or 10-digit
registration code, write down the code and
2. Download the DivX player software on
your computer and install the software.
3. Start the DivX player software and create
a DivX Account: Click VOD > Create a
DivX Account.
To view information about a song (for
example, title, artist or duration), select the
song, then press
INFO.
To hide the information, press
INFO
again.
View photos
4. In the DivX player, register the TV with
the registration code of the TV: Click VOD
> Register a DivX Certified Device.
5. When prompted, download and save the
registration video to a USB flash drive or
your connected media server.
6. Go to your TV and play the registration
video on your TV. This completes the
registration and activates DivX on your TV.
1. Select in the top bar.
2. Select a photo thumbnail, then pressOK.
Start a slideshow
If there are multiple photos in a folder, select
a photo, then select [Slideshow].
To skip to the next or previous video,
press CH+ or CH -.
To stop the slideshow or close the
photo, press LIST or
.
Consult the DivX website for detailed
support.
Slideshow options
While you play a slideshow, press
OPTIONS, then press OK to select an
option:
To de-register this TV:
1. Press
SOURCE.
2. Select [Browse USB], then press OK.
3. Press OPTIONS, select [DivX® VOD],
then press OK.
[Shuffle off] / [Shuffle on]: Enable or
disable random display of pictures in
the slideshow.
4. Follow the onscreen instructions.
[Repeat]: Select [Repeat] to watch a
slideshow repeatedly or [Play once] to
watch once.
Smart TV
[Slideshow time]: Select the display
time for each photo in the slideshow.
[Slideshow transitions]: Select the
transition from one photo to the next.
[Media server]: When you play content
from a media server, you can select
another media server.
What you can do
With Internet Applications (apps), which are
specially adapted Internet websites for your
TV, you can enjoy these features and more:
Read newspaper headlines
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the TV to the Internet
Watch and rent videos
Check weather forecasts
Catch up with TV programmes that
you missed
1. On your home network, connect a router
with a high-speed connection to the
Internet.
2. Switch on the router.
3. Install the network. See Connect the TV
> Connect to a network and the Internet
(Page 58).
Start Smart TV
1. Press SMART TV.
The terms and conditions of use are
displayed.
Find out more about Smart TV services from
the Smart TV forum website,
Note:
Smart TV services and apps vary from
country to country.
Availability of catch-up TV apps and
their TV programmes is subject to your
TV's country setting. To find out which
TV programmes are available, access
the programme guide within the app.
Smart TV displays one page at a time, in
full-screen view.
Certain websites may not display
completely. Functions that require plug-
ins may be unavailable.
2. Follow the onscreen instructions to
complete registration.
Note: The first time you start Smart TV, a
prompt asks if you want to enable parental
control to lock adult apps. If you lock an
adult app, advertisements and web pages
that are not adapted for Smart TV will
remain accessible.
TP Vision Netherlands B.V. bears no
responsibility regarding the content and
the quality of the content provided by
the content service providers.
Access Smart TV apps
You can access apps through the Smart TV
home page. The icons on this page represent
the apps installed on your TV.
To access an app, select the app, then press
What you need
OK to confirm.
1. On your home network, connect the TV
to the Internet.
2. On your TV, configure Smart TV.
Add apps
1. Select [App Gallery], then press OK.
2. Select an app, then press OK to add it to
your home screen.
3. Follow the onscreen instructions to add
the app.
3. Optional: On your PC, register with Philips
to enjoy exclusive benefits and receive
updates on product information. You can
register at any time.
Tips:
You can search for apps available in
other countries.
To return to the Smart TV home page,
press LIST.
Note: Smart TV services are updated
automatically. To view the latest updates, in
[App Gallery], select [All], then change to
[New].
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Access websites
Rent online videos
What you need
1. Select an Internet app, then press OK.
2. Select the web address field, then press
OK.
A keyboard appears on the screen.
3. For each character of the web address,
select the character, then press OK.
Make sure that your TV is connected to the
Internet through a high-speed broadband
connection. See Connect your TV >
Connect to a network and the Internet
(Page 58).
Access a video store
1. Press SMART TV.
2. Access the [App Gallery] to search for
available video store apps in your country.
Tip: You can also use the Numeric buttons
on the TV remote control to enter a web
address.
Zoom page
To zoom in and out on an Internet page, do
the following:
1. Press OPTIONS, then select [Zoom].
2. Use the slider bar to set the enlargement.
3. Use the Navigation buttons to jump
between highlighted items and scroll through
an Internet page.
3. Select a store, then press OK to confirm.
The icon of the video store is added to the
home page.
4. To access a store, select its icon and press
OK.
Rent a video
Follow the onscreen instructions to rent and
watch the video.
Scroll pages
Press the Navigation buttons and to
scroll up and down on a web page.
1. Open a video store app. You may need to
register or enter your log-in information.
2. Select a video.
3. Make the online payment.
4. Start watching the video.
Reload page
If a page does not load correctly, press
OPTIONS, then select [Reload Page].
View security info
To view security information about a page,
press OPTIONS, then select [Security
info].
Interactive TV
Smart TV options
Clear Smart TV memory
What you can do
With interactive TV, you can view additional
information or entertainment pages provided
by digital TV broadcasters. You can
experience true interactivity by responding
directly to the digital content.
You can clear the Smart TV memory
completely, including your favourites,
parental control code, passwords, cookies
and history.
Warning: This option resets the Smart TV
memory completely. It also deletes the
settings of other interactive applications such
as DTVi (Digital TV interactive).
Note: You cannot download files to your TV
with this feature.
Broadcasters use various interactive TV
systems such as:
1. Press
.
HbbTV (Hybrid Broadcast Broadband
TV)
2. Select [Setup] > [Network settings].
3. Select [Clear Internet memory], then
press OK.
iTV (Interactive TV - MHEG)
MHP (Multimedia Home Platform)
DTVi (Digital TV interactive)
Visit the broadcaster's website for more
information to see which interactive system
is available in your country.
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Here are some examples of interactive
activities you can enjoy:
View information about TV
programmes
Take part in a quiz or competition
Play games
Shop online
Pay for a video-on-demand (VOD)
programme
Vote
Chat
What you need
To enjoy this service, you need:
Digital channels with interactive services
A wired or wireless home network,
connected through a Universal Plug and
Play router (uPnP).
For network connection, see Connect your
TV > Connect to a network and the
Access interactive TV
You can identify channels that offer
interactive services by a message that invites
you to press the Red button or OK to
access an interactive programme.
1. Switch to a digital channel with interactive
services.
While the application is loading, a blinking
symbol is displayed. When the application
has loaded, an icon is displayed.
2. Press the Red button or OK to launch
the interactive application.
3. Follow the onscreen instructions and use
your remote control to navigate the
interactive pages.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
The USB hard drive is formatted
exclusively for this TV. Keep it
3 Use more of
your TV
permanently connected to the TV. You
cannot access the contents of the USB
hard drive from another TV or PC.
Do not overload the USB port. If you
connect a USB hard drive device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
Pause TV
What you can do
While you watch a digital channel, you can
pause a programme to answer a phone call
or to have a break. The broadcast is stored
on a USB hard drive that is connected to the
TV. You can resume playback of the
programme at any time.
Note:
Make sure that the TV and the USB
hard drive are switched off.
While you are formatting the USB hard
drive, do not connect other USB
devices to the TV.
Note:
You can pause a programme for a
maximum of 90 minutes.
What you need
Tune your TV to receive digital
channels. See Change your TV settings
> Channels > Automatic installation
(Page 37).
Connect a USB 2.0 compatible hard
drive with a minimum capacity of 4 GB
and a minimum transfer speed of 30
megabits per second. For optimal
performance, use a hard drive with 32
GB of disk space.
Install USB hard drive
To pause TV, you must connect a USB hard
drive to the TV and format it.
1. Connect the USB hard drive directly to
the TV, or if you intend to connect other
USB devices in future, connect the USB hard
drive through a USB hub.
2. Switch on the TV and the USB hard drive,
if it has an external power source.
If the TV does not recognise the USB hard
drive, use a PC to format it to NTFS or
FAT32 system, then try again.
Caution:
3. Switch to a digital TV channel.
4. Press to start formatting the USB hard
drive.
5. Follow the onscreen instructions to
complete the formatting process.
TP Vision is not responsible if the USB
hard drive is not supported, nor is it
responsible for damage to or loss of
data in the device.
Formatting removes all data from the
connected USB hard drive.
Warning: The formatting process may take
some time. Do not switch off the TV or
disconnect the USB hard drive until this
process is complete.
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Pause a live TV broadcast
Record TV shows
What you can do
If your TV can receive programme guides,
you can record TV programmes onto a USB
hard drive. You can record both current TV
programmes as well as future TV
programmes.
Note:
Recording is only supported in
countries with programme guides.
In Nordic countries, the TV provides
limited support for subtitles while
recording TV programmes.
What you need
Tune your TV to receive digital TV
1. On a digital channel, press to pause a
TV programme.
2. Press to continue watching.
channels such as DVB broadcasts. See
Change your TV settings > Channels >
The status bar shows the following time
indicators:
A. When the programme was paused for
the first time.
B. Where the paused programme is
currently playing.
Connect a USB 2.0 compatible hard
drive with a minimum capacity of 32
GB and a minimum transfer speed of
30 megabits per second. For optimal
performance, use a hard drive with 250
GB of disk space. You can use the same
USB hard drive to record and pause TV
shows.
C. Where the live programme is currently
broadcast.
To watch the stored broadcast, press
or
to search backward or
Install USB hard drive
forward.
To record TV shows, you must connect a
USB hard drive to the TV and format it.
To change playback speed, press
repeatedly.
To watch the live TV broadcast, press
.
or
If the TV does not recognise the USB hard
drive, use a PC to format it to NTFS or
FAT32 system, then try again.
Note: If a recording is in progress, you
cannot pause the TV broadcast.
Caution:
TP Vision is not responsible if the USB
hard drive is not supported, nor is it
responsible for damage to or loss of
data in the device.
Formatting removes all data from the
connected USB hard drive.
The USB hard drive is formatted
exclusively for this TV. Keep it
permanently connected to the TV. You
cannot access the contents of the USB
hard drive from another TV or PC.
The stored broadcast on the USB hard
drive is deleted if you:
Disconnect the USB hard drive.
Start recording a TV programme.
Access Smart TV.
Switch the TV to standby.
Switch to another channel.
Switch source to watch from a
connected device, such as a Blu-ray disc
player or digital receiver.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not overload the USB port. If you
connect a USB hard drive device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
Start recording
Note:
Make sure that the TV and the USB
hard drive are switched off.
While you are formatting the USB hard
drive, do not connect other USB
devices to the TV.
One-touch recording
You can record the programme you are
currently watching with a single button.
1. While you watch TV, press
.
Recording starts immediately. A pop-up
window is displayed, indicating the end time
of the programme.
2. Optional: Use the Navigation buttons to
mark the end time of the recording.
3. Select [Confirm], then press OK.
4. To stop recording, press
.
Note:
While recording, you cannot switch TV
channels or pause a TV broadcast.
If TV guide information is not available,
a default time of 30 minutes is set for
recording. You can change this if
needed.
1. Connect the USB hard drive directly to
the TV, or if you intend to connect other
USB devices in future, connect the USB hard
drive through a USB hub.
2. Switch on the TV and the USB hard drive,
if it has an external power source.
Schedule recordings
View programme information
Depending on the status of a programme,
you can start watching it or schedule to
record the programme.
3. Switch to a digital TV channel.
4. Press to start formatting the USB hard
drive.
5. Follow the onscreen instructions to
complete the formatting process.
1. Press
.
2. Select [TV guide].
3. Select a channel and programme, then
press OK.
Warning: The formatting process may take
some time. Do not switch off the TV or
disconnect the USB hard drive until this
process is complete.
The programme information is displayed.
Note: If you schedule recordings while you
are away, make sure that you leave the TV in
standby and keep the USB hard drive
switched on.
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Schedule a TV programme recording
You can schedule a recording of an
upcoming programme that will be broadcast
today or in up to eight days' time. You can
also schedule a timed recording that is not
linked to any programme, if programme
guide information is not available.
3. Press OPTIONS.
4. Select an option to sort by name, date,
expiry date or type, then press OK.
Note:
If a broadcaster limits the number of
days that a recording can be viewed
after the programme has been
broadcast, the list of recordings shows
the number of days before the
recording expires.
1. Press , then select [TV guide].
2. Select the channel and programme to
record.
3. Optional: To record a programme that
will be broadcast on another day: press
OPTIONS, select [Change day], then select
If a recording has expired or if a
broadcaster restricts playback, the
recording cannot be played.
If a scheduled recording is prevented by
the broadcaster or if the recording does
not occur as per schedule, it is marked
as [Failed] in the recordings list.
another day.
4. Select [Record].
A pop-up window is displayed.
5. Select and change the recording details
with the Numeric buttons and Navigation
buttons.
Delete recordings
6. Select [Confirm], then press OK.
You can view a list of all recordings and the
remaining USB hard disk space. To free up
disk space, delete recordings.
Change a scheduled recording
1. Press
.
2. Select [Recordings], then press OK.
1. Press
.
A list of scheduled recordings is displayed.
3. Select the recording, then select [Adjust
time].
4. Change the recording time as needed,
then select [Confirm].
2. Select [Recordings], then press OK.
A list of recordings is displayed.
3. Select the recording, then select
[Remove].
Cancel a scheduled recording
1. Press
.
Use Skype™
2. Select [Recordings], then press OK.
A list of recordings is displayed.
What you can do
3. Select the recording, then select
[Remove].
The schedule recording is cancelled.
Talk to anyone else on Skype,
anywhere in the world, for free.
Make low-cost calls to phones and
mobiles. A Skype subscription is
Watch recordings
1. Press
.
Participate in conference calls.
Send and receive voicemails.
Forward a call.
Manage your online status, 'mood'
message and profile information.
2. Select [Recordings], then press OK.
A list of recordings is displayed.
3. Select a recording from the list, then press
OK.
The recording starts to play.
Sort recordings
1. Press
.
2. Select [Recordings], then press OK.
A list of recordings is displayed.
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Create an account
If you do not have a Skype name and
password, you can create an account from
your TV.
1. Select [Don't have a Skype Name?], then
press OK.
2. Read the Skype End User License
Agreement, Terms of Service and Privacy
Statement. Once complete, select [Accept]
and press OK.
Note:
No emergency calls with Skype. Skype
is not a replacement for your telephone
and cannot be used for emergency calls.
This TV comes with Skype pre-installed
on it and ready to use. You do not
need to install or download any files for
using Skype. Simply connect a Philips
TV video camera to use Skype.
3. When prompted, add information about
your name, Skype name, password and email
address.
4. Once complete, select [Create an
account] and press OK.
Your new account is accepted and you are
signed in.
If prompted, follow the onscreen instructions
to make changes to the entries.
What you need
A Philips TV video camera, PTA317/00
(sold separately), with built-in
microphone. See Connect your TV >
Connect more devices > Video call
Sign out from Skype
In the Skype menu, select [Sign Out], then
press OK.
An Internet connection.
Manage contacts
A wired or wireless home network. For
network connection, see Connect your
TV > Connect to a network and the
A Skype account. You can create a
Skype account on this TV or from your
computer.
You can add and view contacts that are
online or offline. You can also block or
unblock a selected contact.
Add a contact
1. In the Skype menu, select [Contacts],
then press OK.
2. Press OPTIONS, then select [Add
Skype contact] or [Add SkypeOut
Contact].
Tip: If you have connected a USB keyboard
to this TV, you can enter text from your
keyboard. For keyboard connections, see
Connect your TV > Connect more devices
> Keyboard and mouse (Page 54).
3. Press OK to display the onscreen
keyboard.
4. Follow the on-screen instructions to enter
the details.
Start Skype
A list of profiles is displayed.
Sign in to your account
5. Select a contact, then press OK.
1. Press , then select [Skype].
2. Enter your [Skype Name] and
[Password]. To enter text, select each field
and press OK to access the onscreen
keyboard.
3. Select [Sign in], then press OK.
An invitation request is sent to the contact.
The contact name appears offline until the
contact accepts the request.
Accept a contact request
Other Skype users can invite you to be on
their contact list. You will be notified of their
request, which you can accept or decline.
The Skype menu is displayed.
Tip: If you have forgotten your password,
start Skype on your computer. Visit
www.skype.com to retrieve your password.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Rename a contact
1. In the Skype menu, select [Contacts],
then press OK.
2. Select a contact, then press OPTIONS.
3. Select [Rename], then press OK.
4. Follow the onscreen instructions to edit
the information.
1. In the Skype main menu, select
[Contacts], then press OK.
2. Select the contact, then press OK.
3. Select [Call], then press OK.
Voice call options
During a call, press OPTIONS to access
these options:
Block a contact
1. In the Skype menu, select [Contacts],
then press OK.
2. Select the contact, then press
OPTIONS.
3. Select [Block], then press OK. When
[Mute]: Mute the microphone.
[Hold]: Put the call on hold.
[End call]: End the call.
[Dial pad]: Access the dial pad.
[Start My Video]: Start video camera.
Make a video call
With video calls, you can talk face-to-face
with live video from your TV for free.
prompted, select [Yes] then press OK.
Unblock a contact
1. In the Skype menu, select [Settings] >
[Blocked Contacts].
2. Select the blocked contact, then press
OK.
1. From the Skype menu, select [Contacts],
then press OK.
2. Select the contact, then press OK.
3. Select [Video call], then press OK.
3. Follow the on-screen instructions to
unblock the contact.
Full-screen view
If your contact has a camera connected and
accepts the call, you can see the person on
your TV, in full screen. To check what your
contact can see, view the display in the small
screen on your TV.
Contact info
To view the details of a contact, select a
contact. The contact details are displayed on
the right of the TV screen.
Contact history
To view the calls which you have had with a
contact, select [History].
1. During the call, press OPTIONS.
2. Select [Full view], then press OK.
Zoom and pan your video
1. In [Full view], select [Zoom]+/- to zoom
To open previous conversations, select a
conversation and press OK.
in or zoom out.
Note: When you sign in with another Skype
account on this TV, the history of your
previous account is cleared.
A zoom and pan icon appears above the
video display.
2. Use the Navigation buttons on the
Online status
remote control to pan or tilt the camera.
To see if a contact is online, check the online
status icon next to the contact. Your online
status is also shown on your contacts' page.
Video call options
During a video call, press OPTIONS to
access these options:
To change your online status:
1. In the Skype menu, select your Skype
name, then press OK.
2. Select [Online Status], then press OK.
3. Select a status, then press OK.
[Full view]: See your contact in full-
screen view.
[Dial pad]: Access dial pad.
[Hold]: Put the call on hold. Full view
will be stopped.
[Mute]: Mute the microphone.
[Stop My Video]: Stop the video feed
to your contact's screen.
Make voice and video calls
Make a voice call
You can make a Skype call without video.
Note: Make sure that a video camera is
connected for voice calls too.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording of a TV programme is
stopped. You will need to resume
recording again after you finish the call.
Playback of rental films is stopped. To
resume watching the rented film, you
need to go back to the video store or
broadcast service. Some video stores
and services do not allow you to restart
the film.
Call a phone
With Skype, you can call land line phones
and mobile phones.
Note:
No emergency calls with Skype. Skype is not
a replacement for your telephone and
cannot be used for emergency calls.
Manage voicemails
If someone calls you on Skype and you are
offline, they can leave a voice message in
your Skype voicemail.
Before you can receive voicemail, you need
to activate voicemail in your Skype account –
this can only be done on your computer.
Play voicemail
1. In the Skype menu, select [History] and
press OK.
2. Select [Voicemails], then press OK.
3. Select the voicemail, then press OK to
play it.
Before you can make a call, you will need to
purchase Skype Credits or buy a Skype
subscription on your computer. For more
information, see Use more of your TV >
1. In the Skype menu, select [Call phones],
then press OK.
2. Select [Dial pad] to access the on-screen
dial pad or enter the telephone number with
the Numeric buttons.
Delete voicemails
1. Select the voicemail from the list and
press OPTIONS.
2. Select [Delete voicemail], then press OK.
3. Once complete, select [Call], then press
OK to start the call.
4. Optional: To mute your microphone
during your call, press OPTIONS, then
select [Mute].
Skype settings
Skype Credit
5. To end the voice call, select [End call],
then press OK.
With Skype Credit, you can call land lines or
mobile phones on your TV. To purchase
Skype Credit, you need to log in to your
Skype account on your computer. The
amount of Skype Credit you purchase will
appear when you log in to your Skype
account on your TV.
Answer a call
If you are signed in to Skype, you are notified
of incoming calls while watching TV.
1. A message appears onscreen with the
caller's name. Select [Answer], then press
OK.
To enable video, select [Answer with
video], then press OK.
Automatic sign in
1. In the Skype menu, select [Settings], then
press OK.
2. Select [General settings] > [Sign me in
when Skype starts], then press OK.
2. To decline, select [Decline], then press
OK.
Note:
Change your profile picture
If you accept a call while pausing or
recording a TV programme, or while
watching rental films, Skype will interrupt the
activity going on.
1. In the Skype menu, select your Skype
name, then press OK.
2. Select [Profile picture], then press .
3. Choose a picture, select [Apply], then
press OK.
A paused TV programme is stopped
and the programme storage is lost.
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Change your Skype password
1. In the Skype menu, select [Settings], then
press OK.
1. Press
SOURCE.
2. Select the game console, then press OK.
3. If needed, load a game disc on the game
console.
2. Select [Change Password], then press .
4. On the game console, select a multi-player
or two-player game, then select split-screen
viewing.
3. Follow the onscreen instructions to enter
your current and new passwords.
4. Once complete, select [Apply], then press
OK.
5. Press OPTIONS on the TV remote
control.
6. Select [Picture and sound] > [Two-
player gaming].
7. Select [Top / bottom] or [Side by side],
then press OK.
Play games
What you can do
8. Put on the two-player glasses to view the
different screens.
9. To exit, press twice.
On this TV, you can play single or two-
player games, in full-screen with optimised
picture settings for games.
Tip: To view game menus or scores, press
OK to switch viewing mode.
What you need
Game settings
Picture setting for games
You can optimise the TV display for gaming
without picture lag.
1. Press
.
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select [Game or computer] > [Game].
Connect your game console to this TV.
See Connect your TV > Connect
A two-player kit, PTA436 (sold
separately) for two-player full-screen
gaming. The kit comes with two pairs of
gaming glasses.
Sound preset for games
You can optimise sound effects for gaming.
1. Press OPTIONS.
2. Select [Picture and sound] > [Sound
style] > [Game], then press OK.
The TV is ready for gaming.
Start gaming
Note: When your gaming session ends,
switch back to your usual sound setting.
1. Press
SOURCE.
2. Select the game console, then press OK.
3. If needed, load a game disc on the game
console, then select a game to play.
View Text
4. Follow the onscreen instructions to start
gaming.
Select a page
While you watch channels that broadcast
text, you can view the text.
Start two-player full-screen gaming
Some games offer multi-player and split-
screen gaming. The 3D technology of this
TV can display the split-screens as two full
screen views. With the two-player gaming
glasses, each player can experience different
views on the same TV.
1. Select a channel that broadcasts text, then
press TEXT.
2. Select a page in one of the following ways:
Enter the page number with the
Numeric buttons.
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CH + / CH - to view the next or
previous page.
Press the Colour buttons to select a
Subpages
If the text page contains several subpages,
you can view each subpage in succession.
These subpages are shown on a bar next to
the main page number.
colour coded item.
Text options
1. While you view text, press OPTIONS.
Press or to select them.
2. Select an option:
Search
[Freeze page] / [Unfreeze page]:
Freeze or unfreeze the current page.
[Dual screen] / [Full screen]: Enable or
disable dual screen text. Dual screen
displays both the current channel and
the text broadcast on two halves of the
TV screen.
You can search for a word or number that
exists on the current text page.
1. While you are viewing text, press OK to
highlight the first word or number.
2. Press the Navigation buttons to skip to
the word or number to search.
3. Press OK to begin the search.
4. To exit the search, press until no word
or number is highlighted.
[T.O.P. overview]: Table Of Pages
(T.O.P.) text broadcasts allow you to
jump from one subject to another
without entering page numbers.
[Enlarge] / [Normal view]: Zoom in on
the page. Press the Navigation buttons
to move around the enlarged view.
[Reveal]: Hide or reveal hidden
information on a page, such as solutions
to riddles or puzzles.
Digital text
If a digital TV channel's broadcaster offers
dedicated digital text or interactive services,
you can view digital text. Channels such as
BBC1 may have digital text with more
interactive features.
[Cycle subpages]: If subpages are
available, each is shown automatically.
[Language]: Switch to a different
language group to correctly display
different character sets.
[Text 2.5]: View text with more
colours and better graphics than normal
text. If Text 2.5 is broadcast by a
channel, it is switched on by default.
Note: Digital text services are blocked when
subtitles are broadcast and switched on. See
Change your TV settings > Language
settings > Subtitles on digital channels
(Page 41).
When in digital text:
Press the Navigation buttons to select
or highlight items.
Press the Colour buttons to select an
option, then press OK to confirm or
activate.
Text language
For digital TV channels where the
broadcasters provide different text
languages, you can select your preferred
primary and secondary languages.
Set locks and timers
1. Press
.
Clock
2. Select [Setup] > [Channel settings] or
[Satellite settings].
You can display a clock on the TV. The clock
displays the time that is broadcast by your
TV service operator.
3. Select [Languages] > [Primary Text] or
[Secondary Text].
4. Select a language, then press OK.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Display the TV clock
Sleep timer
1. While you watch TV, press OPTIONS.
2. Select [Clock], then press OK.
The clock is displayed on the top right-hand
corner of the TV screen.
You can switch the TV to standby after a
specified time. During the countdown to the
specified time, you can switch off your TV
earlier or reset the sleep timer.
Change the clock mode
1. Press
.
You can change the clock mode to
automatic or manual. By default, it is set to
automatic mode, which automatically
synchronises it to Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
[Manual].
2. Select [Setup] > [TV settings] > [General
settings] > [Sleep timer].
3. Select the sleep timer duration.
The sleep timer can be set up for to 180
minutes. To switch off the sleep timer, set it
to zero minutes.
4. Press OK to activate the sleeptimer. After
the specified time, the TV switches to
standby.
1. While you watch TV, press
2. Select [Setup] > [TV settings] > [General
settings].
.
3. Select [Clock] > [Auto clock mode].
4. Select [Automatic], [Manual] or [Country
dependent], then press OK.
Child lock
To protect children from unsuitable TV
programmes, you can lock the TV or block
age rated programmes.
Change the time zone
In countries with clock transmission data, you
can change the time zone if [Auto clock
mode] > [Automatic] or [Country
dependent] is selected.
Set or change the child lock code
1. Press
.
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Child lock].
1. In the [Clock] menu, select [Time zone].
3. Select [Set code] or [Change code].
4. Enter the code with the Numeric
buttons.
2. Select your time zone, then press OK.
Set daylight saving time
In countries with clock transmission data, you
can enable or disable daylight saving time if
[Auto clock mode] > [Automatic] or
[Country dependent] is selected.
Tip: If you access the channels from the
channel list, you are prompted to enter your
lock code. If you forget your code, enter
‘8888’ to override any existing codes.
1. In the [Clock] menu, select [Daylight
saving].
2. Select [Standard time] or [Daylight saving
Lock or unlock channels
1. In the child lock menu, select [Channel
lock].
time], then press OK.
2. Enter the child lock code with the
Set the clock manually
Numeric buttons.
You can set the date and time manually.
Before you start, set the clock mode to
[Manual].
3. Select the channels to lock or unlock.
Restart the TV to activate the lock.
Note:
If you access the channels from the channel
list, you are prompted to enter your lock
code.
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Set the time or date with the Navigation
buttons.
3. Select [Done], then press OK.
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental rating
You can set your TV to display only
programmes with age ratings lower than
your child's age. This restriction only applies
to digital channels from broadcasters that
rate their programmes according to age.
1. Press
.
2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Child lock] > [Parental rating].
You are prompted to enter the child lock
code.
4. Enter the child lock code with the
Numeric buttons.
5. Select an age rating, then press OK.
All programmes above the selected age
rating are blocked.
For information on child lock codes, see Use
more of your TV > Set locks and timers >
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
[Pixel Plus HD] / [Pixel Precise HD]:
Fine-tune each pixel to match
surrounding pixels and produce a
brilliant, high-definition image.
4 Change your TV
settings
- [Advanced sharpness]: Enable
superior sharpness, especially on lines
and contours in the picture
Picture and sound
- [Dynamic contrast]: Dynamically
enhance the details in the dark, medium
and light areas of the picture.
Settings assistant
You can select picture and sound settings
with the help of the settings assistant, which
demonstrates the effect of your chosen
setting immediately.
- [Dynamic backlight]: Select a
backlight level to optimise dynamic power
consumption and picture contrast.
- [Colour enhancement]:
Dynamically enhance the vividness and
details of colours.
1. While you watch TV, press
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Continue], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.
.
[Advanced]: Access advanced settings
such as gamma, tint settings and video
contrast settings.
- [Light sensor]: Adjust the
brightness of the TV screen
More picture settings
automatically according to the lighting
conditions of the room.
You can change the settings in the Picture
menu.
- [Gamma]: Adjust the non-linear
setting for picture luminance and
contrast.
1. Press
.
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
- [Tint]: Change the colour
balance.
3. Select a setting to change, then press OK.
- [Custom tint]: Customise colour
balance setting. Only available if [Tint] >
[Custom] is selected.
- [3D video contrast] / [Video
contrast]: Adjust video contrast.
- [Brightness]: Adjust screen
[Picture style]: Select a predefined
picture setting.
[Restore style]: Restore the last-
selected predefined picture setting.
[3D backlight contrast] / [Backlight
contrast]: Adjust the brightness of the
display backlight.
brightness.
- [Hue]: Compensate colour
[Colour]: Adjust the colour saturation
of the picture.
variations in NTSC transmissions.
[Game or computer]: When viewing
content from a connected game
console, select [Game] to apply game
[Sharpness]: Adjust the sharpness of
the picture.
[Noise reduction]: Select the amount
of noise reduction for the picture.
[MPEG artifact reduction]: Smoothen
transitions and haziness in the digital
picture.
settings. When a computer is
connected through HDMI, select
[Computer]. Make sure that [Format
and edges] > [Picture format] >
[Unscaled] is selected to view
maximum detail.
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
- [Clear Sound]: Enhance sound
[Format and edges]: Access advanced
quality.
settings to control the display format of
the picture.
- [Audio Out format]: Select the
- [Picture format]: Change the
type of audio output through the digital
audio output connector. Choose between
[Multichannel] and [Stereo].
picture format.
- [Screen edges]: Change the
picture size.
- [Audio Out levelling]: Set the
output level for stereo audio. Select [Less]
for a certain amount of loss in intensity or
signal strength. Select [More] for no loss in
intensity or signal strength.
- [Picture shift]: If available, move
the position of the picture.
More sound settings
- [HDMI 1 - ARC]: Enable audio
You can change the settings in the Sound
menu.
output from the ARC-compliant device
connected to the HDMI 1 connector.
1. Press
.
- [Audio out delay]: Automatically
sync the image on the TV to the audio from
a connected home theatre. You do not need
to use this setting when connecting the TV
to a Philips home theatre.
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to change, then press OK.
[Sound style]: Access predefined sound
settings.
[Restore style]: Restore the last
selected predefined sound setting.
[Bass]: Adjust the bass level of the
speaker and headphones.
[Treble]: Adjust the treble level of the
speaker and headphones.
[Surround mode]: Select a surround
- [Audio out offset]: Adjust the
setting for audio output delay. Available if
[Audio out delay] is switched on.
Audio format
Digital channels
If a digital TV channel broadcaster streams
audio in multiple formats, you can select an
audio format.
sound mode to enhance your audio
experience.
1. Press
.
[Auto incredible surround 3D]: Select
a surround sound mode to enhance
your audio experience in 3D mode. For
certain models.
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Languages] >
[Preferred audio format].
3. Select an option, then press OK.
[Headphone volume]: Adjust
headphone volume.
[Standard]: Receive standard audio
format (MPEG).
[Advanced]: Access advanced settings
to enhance your audio experience.
- [Auto volume levelling]:Enable
the reduction of sudden volume
changes, for example, when switching
channels.
[Advanced]: Receive advanced audio
formats, if available (AAC, Dolby Digital
or Dolby Digital Plus).
Analogue channels
If an analogue TV channel broadcaster
streams stereo audio in multiple formats, you
can select an audio format.
- [TV speakers]: Select the
preferred speakers to stream audio
from the TV. See Connect your TV >
Set up EasyLink devices > Select
1. Press
.
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Mono/Stereo].
3. Select a setting, then press OK.
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset picture and sound
Install analogue channels
You can restore the default picture and
sound settings, while the channel installation
settings remain the same.
You can search and store analogue TV
channels one by one.
Step 1: Select your system
Note: Skip this step if your system settings
are correct.
1. While you watch TV, press
.
2. Select [Setup] > [TV settings] > [General
settings] > [Factory settings], then press
OK.
1. While you watch TV, press
.
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Reset], then press OK.
3. Select [Analogue: Manual installation] >
[System], then press OK.
All TV settings (except for channel settings)
are reset to the default factory settings.
4. Select the system for your country or
region, then press OK.
Channels
Step 2: Search and store new TV channels
1. While you watch TV, press
.
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Analogue: Manual installation] >
[Search channel], then press OK.
Automatic installation
When the TV was switched on for the first
time, a full installation of channels was
performed.
4. Find the channel:
To change your language, country and
reinstall all available TV channels, you can run
this full installation again.
If you know the channel frequency,
enter it with the Navigation buttons or
Numeric buttons.
Start installation
Note: If you are prompted to enter a code,
enter '8888'.
If you do not know the channel
frequency, search for the next
frequency that has a strong signal.
Select [Search], then press OK.
1. Press
.
2. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
3. Select your country, then press OK.
5. After you have found the correct channel,
select [Done], then press OK.
6. Select [Store as new channel], then press
OK to store the new TV channel.
4. Select your network, then press OK:
[Antenna (DVB-T)]: Access free-to-air
antenna transmissions.
Note: If the reception is poor, reposition
your antenna and repeat the procedure.
[Cable (DVB-C)]: Access cable
transmissions.
Install digital channels
5. Follow the onscreen instructions to select
other options, if any.
The start menu for channel search is
displayed.
6. Select [Start], then press OK.
7. Once the channel search is complete,
select [Finish], then press OK.
If you know the channel frequency of the
channels you want to install, you can search
and store digital channels one by one. For
best results, contact the service provider.
1. Press
.
2. Select [Setup] > [Channel settings] >
[Channel installation].
Tip: Press LIST to see the channel list.
Note: When digital TV channels are found,
the list of installed channels may display
empty channel numbers. You can rename or
reorder these channels.
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select [Digital: Reception test] > [Search
channel], then press OK.
4. Press the Numeric buttons to enter the
Switch off the channel update message
If a channel update is performed, a message
is displayed at startup. You can switch off this
message.
channel frequency.
5. Select [Search], then press OK.
6. When the channel is found, select [Store],
then press OK.
1. Press
.
2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Channel installation] > [Channel
update message].
4. Select [Off], then press OK.
Fine-tune analogue channels
If the reception of an analogue TV channel is
poor, you can fine-tune the TV channel.
Switch off automatic updates
In the [Channel installation] menu, select
[Automatic channel update] > [Off].
1. Press
.
2. Select [Setup] > [Channel settings] >
[Channel installation].
Update channels manually
3. Select [Analogue: Manual installation] >
[Fine tune], then press OK.
4. Press or to fine-tune the channel.
1. Press
.
2. Select [Setup] > [Search for channels] >
[Update channels], then press OK.
3. Follow the onscreen instructions to
update the channels.
5. When you have selected the correct
channel frequency, select [Done], then press
OK.
6. Select an option, then press OK.
Copy channels
ATTENTION: This feature is intended for
dealers and service personnel.
[Store current channel]: Store the
channel under the current channel
number.
[Store as new channel]: Store the
channel under a new channel number.
You can copy channel lists from one Philips
TV to another through a USB storage
device. You do not need to search for
channels or install them again on the second
TV. The channel list file is small enough to fit
on any USB storage device.
Update channel list
When the TV was switched on for the first
time, a full installation of channels was
performed. By default, when there are
changes to these channel lists, the TV
updates them automatically. You can also
switch off the automatic update or manually
update the channels.
What you need
Two Philips TVs that have these properties:
The same country setting
The same year range
The same DVB type, as indicated by
the suffix (H, K, T, D/00) in the model
name
Note: If you are prompted to enter a code,
enter '8888'.
The same settings for satellite channels,
including the number of LNB satellites
The same hardware type, as indicated
by the sticker on the back of the TV.
For example: TPM10.1E LA.
Compatible software versions
Automatic update
To add or remove digital channels
automatically, leave the TV in standby mode.
The TV updates channels and stores new
channels everyday. Empty channels are
removed from the channel list.
Note: If you are prompted to enter a code,
enter '8888'.
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Check the country setting
1. Switch on the first TV (with the channels
that you want to copy to the second TV).
4. Make sure that the country setting is the
same as for the first TV.
5. Press
.
6. Press [Cancel] to exit.
2. Press
.
3. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
The country menu is displayed.
7. If the country setting is different, reinstall
the second TV to match the country setting
of the first TV. See Change your TV settings
4. Make a note of the current setting.
5. Press
.
8. Connect the USB storage device to the
second TV.
6. Press [Cancel] to exit.
Step 2: Copy channel list to USB
1. Connect a USB storage device to the first
TV (with the channels installed on it).
9. Press
.
10. Select [Setup] > [Channel settings] or
[Satellite settings].
11. Select [Channel installation] > [Copy
channel list] > [Copy to TV], then press
OK.
2. Press
.
3. Select [Setup] > [Channel settings] or
[Satellite settings].
The channel list is copied to the second TV.
12. Disconnect the USB storage device.
4. Select [Channel installation] > [Copy
channel list] > [Copy to USB], then press
OK.
The channel list is copied to the USB storage
device.
5. Disconnect the USB storage device.
Satellite settings
Step 3: Copy channels to a TV with no
channels installed
1. Switch on the second TV, on which you
want to copy the channel list.
What you can do
This TV can receive signals from 4 different
low noise block-down converters (LNBs).
An LNB is mounted at the end pole of the
dish antenna and captures signals from a
satellite.
Initial installation starts.
2. Follow the onscreen instructions and
select the same country as the TV whose
channel list you want to copy.
3. Skip the search for channels.
4. Connect the USB storage device.
Note:
Satellite reception is available for certain
models only. [Search for satellite] is
only available if the TV supports DVB-S.
To receive satellite channels, connect a
satellite receiver to the SAT connector
on your TV.
5. Press
.
6. Select [Setup] > [Channel settings] or
[Satellite settings].
7. Select [Channel installation] > [Copy
channel list] > [Copy to TV], then press
OK.
The channel list is copied to the TV storage
device.
Install satellite channels
Reinstall satellites
1. While you watch TV, press
2. Select [Setup] > [Search for satellite] >
.
8. Disconnect the USB storage device.
[Reinstall satellites].
Step 3: Copy channels to a TV with pre-
installed channels
1. Switch on the second TV, on which you
want to copy the channel list.
3. Follow the onscreen instructions to
complete the installation.
4. Once complete, select [Finish], then press
OK.
2. Press
.
3. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
The country menu is displayed.
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Before you add satellites, make sure
Select connection type
that the connection type is correct. See
Change your TV settings > Satellite Settings
When you install satellite channels, you need
to set the connection type. The number of
LNBs on your dish antenna determines the
number of satellite channels you can install.
1. While you reinstall satellites, select
[Settings], then press OK.
1. Press
.
2. Select [Setup] > [Search for satellite],
then press OK.
3. Select [Add satellite], then press OK.
The TV searches for a satellite on the first
free LNB. This can take several minutes.
2. Select [Connection type].
3. Select a setting, then press OK.
[1 satellite (Single LNB)]: Select if you
have only one LNB.
[2 satellites (DiSEqC Mini)]: Select if
you have 2 LNBs.
[3 or 4 satellites (DiSEqC 1.0)]: Select
for 3 or 4 LNBs.
[Unicable for 1 satellite]: Select if you
have a Unicable setup with 1 satellite.
[Unicable for 2 satellites]: Select if you
have a Unicable setup with 2 satellite.
4. If no satellite is found, check the antenna
connections and the position of the dish
antenna, then select [Search again].
5. If you are satisfied with the added satellite,
select [Next] to install all channels from the
satellite.
The installation can take several minutes.
Remove a satellite
1. Press
.
2. Select [Setup] > [Search for satellite] >
Manual installation
[Remove satellite], then press OK.
3. Select the satellites you want to remove,
then select [Remove] and press OK.
If a transponder is skipped during installation,
you can test the signal strength of a
transponder or add a new transponder.
1. While you watch TV, press
.
2. Select [Setup] > [Search for satellite] >
[Manual installation], then press OK.
3. Select the LNB.
Language settings
Menu language
4. If you know the frequency of the
transponder (which can include several
channels), select [Frequency]and set the
frequency.
5. Select [Search], then press OK.
6. If a new frequency is found, press
1. While you watch TV, press
2. Select [Setup] > [TV settings] > [General
settings] > [Menu language].
3. Select a menu language from the list, then
.
press OK.
[Store]to add the new transponder with its
channels.
Audio language
Update satellite channels
1. While you watch TV, press
2. Select [Setup] > [Search for satellite] >
If the TV channel broadcasts multiple or dual
audio languages, you can select your
preferred audio language.
.
[Update channels].
1. While you watch TV, press OPTIONS.
3. Follow the onscreen instructions to
complete the installation.
4. Once complete, select [Finish], and then
press OK.
2. For digital channels, select [Audio
language]. For analogue channels, select
[Dual I-II]. Press OK to confirm your
selection.
3. Select from the available languages, then
press OK.
Add and remove satellites
You can add or remove satellites at any
time, and install channels from new satellites.
You can set your preferred primary and
secondary audio languages to hear when
available.
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
1. While you watch TV, press
.
Universal access settings
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Languages].
3. Select [Primary audio language] or
[Secondary audio language] and select from
the available languages.
Switch on
Some digital TV broadcasters provide special
audio and subtitle features for people who
are hearing or visually impaired. You can
switch these features on or off.
4. Press OK to confirm.
Subtitles on analogue channels
1. Press
.
1. While you watch an analogue TV channel,
press TEXT.
2. Enter the three-digit page number of the
subtitles page, which is usually '888'.
If available, subtitles are switched on.
2. Select [Setup] > [TV settings] > [General
settings].
3. Select [Universal access] > [On] or [Off],
then press OK.
Set audio feedback
Subtitles on digital channels
When you press a button on the remote
control or TV, you can set the TV to play a
beep.
1. While you watch a digital TV channel,
press OPTIONS.
2. Select [Subtitles], then press OK.
3. Select [Subtitles off], [Subtitles on] or
[Automatic], then press OK.
1. While you watch TV, press OPTIONS.
2. Select [Universal access] > [Key beep] >
[On], then press OK.
Subtitle language
Hearing impaired access
When available, you can change the subtitle
language for digital channels.
To make sure that a hearing-impaired audio
language is available, press OPTIONS,
then select [Audio language]. Languages that
support hearing-impaired audio are indicated
with an ear-shaped icon.
Switch on hearing-impaired audio and
subtitles
1. While you watch TV, press OPTIONS.
2. Select [Subtitle language], then select
from the available languages and press OK.
The subtitle language is changed for the
specific channel.
You can set your preferred primary and
secondary subtitle languages to display when
available.
1. While you watch TV, press OPTIONS.
2. Select [Universal access] > [Hearing
impaired].
3. Select a setting, then press OK.
1. While you watch TV, press
.
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Languages].
3. Select [Primary subtitle language] or
[Secondary subtitle language] and select
from the available languages.
[Off]: Switch off hearing impaired
features.
[On]: Switch on hearing impaired audio
and subtitles.
4. Press OK to confirm.
Visually impaired access
To make sure that a hearing-impaired audio
language is available, press OPTIONS,
then select [Audio language]. Languages that
support visually impaired audio are indicated
with an eye-shaped icon.
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Select speakers or headphones
[Subtitles]: Hear subtitles in the visually
You can choose to hear the visually impaired
audio through the TV speakers, headphones
or both.
1. While you watch TV, press OPTIONS.
2. Select [Universal access] > [Visually
impaired].
impaired audio.
Other settings
TV demo
3. Select a setting, then press OK.
You can watch a demo to find out more
about the features on this TV.
[Speakers]: Hear visually impaired
audio from speakers only.
[Headphones]: Hear visually impaired
1. While you watch TV, press
.
2. Select [Setup] > [Watch demos], then
press OK.
audio from headphones only.
[Speakers + headphones]: Hear visually
impaired audio from speakers as well as
headphones.
3. Select a demo, then press OK.
Home mode
[Off]: Switch off visually impaired audio.
Some TV settings may not be available in
Shop mode. To make sure that the correct
TV settings are applied, set the TV to Home
Note: If the EasyLink remote control is
switched on, you cannot select the Green
button. To switch off EasyLink, see Connect
your TV > Set up EasyLink devices > What
mode.
1. While you watch TV, press
.
2. Select [Setup], then press OK.
Change volume for visually impaired audio
1. While you watch TV, press OPTIONS.
2. Select [Universal access] > [Mixed
volume].
3. Select [TV settings] > [General settings]
> [Location].
4. Select [Home] or [Shop], then press OK.
5. Restart the TV.
3. Press the Navigation buttons to change
the volume, then press OK.
Audio effects
Update software
1. Press
.
2. Select [Setup] > [Channel settings] or
[Satellite settings].
Check version
3. Select [Languages] > [Visually impaired]
or [Audio effects].
1. Press
.
2. Select [Setup] > [Software settings] >
[Current software inf], then press OK.
4. Select a setting, then press OK.
The current software version is displayed.
[On]: Enable audio effects in the visually
impaired audio.
[Off]: Disable audio effects in the
Caution: Do not install a lower version of
software than the current version installed
on your product. TP Vision cannot be held
liable or be made responsible for problems
caused by a software downgrade.
visually impaired audio.
Type of speech
1. Press
.
2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Languages] > [Visually impaired]
Update the software through one of these
methods:
update with USB storage device
update from digital broadcast
update from the Internet
or [Speech].
4. Select a setting, then press OK.
[Descriptive]: Hear descriptive speech
in the visually impaired audio.
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not switch off the TV or remove
the USB flash drive during the software
upgrade.
If a power failure occurs during the
upgrade, do not remove the USB flash
drive from the TV. The TV continues
the upgrade as soon as power is
restored.
If an error occurs during the upgrade,
retry the upgrade from the beginning. If
the error reoccurs, contact Philips
Consumer Care.
Update with USB
What you need
A USB storage device that has at least
256 megabytes of storage space, is FAT
or DOS formatted and has its write
protection disabled.
Access to a computer with a USB
connector and Internet access.
A file archiver program that supports
the ZIP file format: for example,
WinZip® for Microsoft® Windows®
or StuffIt® for Macintosh®.
1. Remove all USB devices such as a Wi-Fi
adapter from the TV, then switch on the TV.
2. Connect the USB flash drive to the TV.
The software upgrade starts automatically.
The upgrade is complete when a notification
message appears on screen.
Note: Do not use a USB hard drive.
Download the latest software
1. Connect the USB flash drive to your
computer.
2. On your computer, launch a browser such
as Internet Explorer® or Safari®, and see
3. Before you restart the TV, disconnect the
USB flash drive from the TV.
3. Find your TV and locate the software and
drivers available for your TV set. The
software upgrade is available as a
compressed file (*.zip).
4. Press on the remote control – do not
press more than once.
The TV switches off, then back on again. The
upgrade is complete.
4. If the software version is higher than the
version on your TV, click the software
upgrade link.
5. To prevent accidental updates to the TV
software, reconnect the USB flash drive to
your computer and delete autorun.upg.
5. Accept the licence agreement and
download the ZIP file to the USB flash drive.
Update from digital broadcast
When available, the TV can receive software
updates through digital broadcasts. When a
software update is received, you are
prompted to update the software. We
strongly recommend that you update the
software when prompted.
Note: Some Internet browsers, such as
Mozilla® Firefox® or Google® Chrome®,
may download the ZIP file directly to your
computer. If this happens, copy the file to
your USB flash drive.
6. For Internet Explorer: Using a file
archiver, extract autorun.upg from the
downloaded ZIP file. Do not copy or place
the extracted file into a folder.
Follow the onscreen instructions.
If you do not update the TV software when
the update is received, you are prompted to
save the update file. To update the software
later:
6. For Safari: When the download is
complete, autorun.upg is automatically
extracted from the ZIP file to your
computer. Copy the file to the USB flash
drive. Do not copy or place the file into a
folder.
1. Press
.
2. Select [Setup] > [Software settings] >
[Local updates].
3. Select the file that you downloaded and
follow the onscreen instructions to complete
the update.
7. Eject and disconnect the USB flash drive
from the computer.
Upgrade the TV software
Caution:
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Update from the Internet
You can also update the TV software
directly from the Internet by connecting the
TV to the Internet. See Connect your TV >
Connect to a Network and the Internet
(Page 58).
1. Press
.
2. Select [Setup] > [Update software] >
[TV with Internet], then press OK.
3. Follow the onscreen instructions to start
the update.
When the update is complete, the TV
switches to standby and on again
automatically. Wait for the TV to switch
back on. Do not switch the TV on yourself.
Note:
If the TV is connected to the Internet,
the TV displays the availability of new
software at startup.
Philips may occasionally push a software
upgrade to your TV over the Internet.
Follow the on-screen instructions to
upgrade the TV software.
Reset all
You can reset all picture and sound settings
and reinstall all TV channels on your TV.
1. Press
.
2. Select [Setup] > [TV settings] > [General
settings] > [Reinstall TV], then press OK.
3. Follow the onscreen instructions.
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Y Pb Pr
5 Connect your
TV
Component video (Y Pb Pr) only transmits
video. For sound, also connect to Audio
Left/Right.
The Y Pb Pr connection can handle
high-definition (HD) TV signals.
Match the Y Pb Pr connector colours
to the cable plugs.
About cables
Cable quality
Before you connect devices to the TV, check
the available connectors on the device.
Connect the device to the TV with the
highest quality connection available. Good
quality connectors transfer picture and
sound better.
The connections shown in this user manual
are recommendations only. Other solutions
are possible. For more examples, visit
SCART
Tip: If your device has only composite or
RCA connectors, use a composite (CVBS)
cable to connect the device to the CVBS/Y
connector on the TV.
A SCART connection combines video and
audio signals.
SCART connectors can handle RGB video
signals but cannot handle high-definition
(HD) TV signals.
HDMI
An HDMI connection has the best picture
and sound quality.
An HDMI cable combines video and
audio signals. Connect HDMI for high-
definition (HD) TV signals and to switch
on EasyLink.
An HDMI Audio Return Channel
(ARC) connector allows output of TV
audio to an HDMI ARC compliant
device.
Connect HDMI cables shorter than 5
meters/16.4 feet.
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect antenna
Connect the antenna to the TV.
Connect devices
Blu-ray or DVD disc player
Connect the disc player to the TV with an HDMI cable.
Connect the disc player to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
EN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
TV receiver
Connect the satellite* or digital TV receiver to the TV with an antenna cable.
*For certain models only.
Connect the satellite or digital TV receiver to the TV with an HDMI cable.
Connect the digital TV receiver to the TV with a component video cable (Y Pb Pr) and an audio
L/R cable.
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the digital TV receiver to the TV with a SCART cable.
Video recorder
Connect the recorder to the TV with an antenna cable.
Connect the recorder to the TV with an HDMI cable.
EN
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the game console to the TV with a component video cable (Y Pb Pr) and an audio L/R
cable.
Home theatre
Connect an HDMI-ARC compliant home theatre to the TV with an HDMI cable.
Connect the home theatre to the TV with an HDMI cable and a coaxial audio cable.
EN
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the home theatre to the TV with a component video cable (Y Pb Pr) and an audio L/R
cable.
Connect the home theatre to the TV with a SCART cable.
Digital camera
Connect the digital camera to the TV with a USB cable.
EN
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital camcorder
Connect the digital camcorder to the TV with an HDMI cable.
Connect the digital camcorder to the TV with a component video cable (Y Pb Pr) and an audio L/R
cable.
EN
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect more devices
USB storage device
Connect the USB hard drive to the TV with
a USB cable.
Connect the USB flash drive with a USB
cable to the TV.
Computer
Connect the computer to the TV with an HDMI cable.
EN
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the computer to the TV with a DVI-HDMI cable and an audio cable.
Video call camera
Connect the Philips TV video camera - PTA317 (sold separately) with a USB cable to the TV.
Note:
Keyboard and mouse
USB keyboard
If you need extra USB connectors, use
a USB hub.
You can also connect the USB mouse
to a connected USB keyboard.
You can connect a USB keyboard to enter
text such as device names on the TV or text
for Smart TV apps.
USB mouse
You can connect a USB mouse to navigate
pages on the Internet and click on links.
EN
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the keyboard and mouse to the TV with a USB cable.
When the TV detects the keyboard, you can
select the keyboard layout and test your
selection. If you have selected a Cyrillic or
Greek keyboard layout first, you can also
select a secondary Latin keyboard layout.
When the TV detects the mouse, you can
set the tracking speed.
1. Press
2. Select [Setup] > [TV settings] > [General
settings] > [Pointer/mouse settings].
3. Change the mouse settings.
.
1. Press
.
2. Select [Setup] > [TV settings] > [General
settings] > [USB keyboard settings].
3. Change the keyboard settings.
TV keys on your keyboard
To make a text entry, use the following keys:
Use the USB mouse with your TV
OK: Left mouse button (left-click).
(Back): Right mouse button (right-
click).
Scroll wheel: to scroll up and down an
Enter : Confirm an entry.
Backspace : Delete a character
before the cursor.
Internet page.
Note: The USB mouse cannot navigate in
the TV menus.
Navigation keys: Navigate within a text
field.
Alt + Shift: Switch between keyboard
layouts if multiple keyboard layouts are
set.
Watch connected devices
Select a device
Smart TV keys on your keyboard
Before you can watch a device, connect the
device to the TV. See Connect your TV >
Enter : Confirm an entry.
Backspace : Go to the previous page.
Navigation keys: Navigate between
fields.
Select a device with SOURCE
1. Press
SOURCE.
Tab: Go to the next field.
2. Select a device, then press OK.
Tab and Shift: Go to the previous field.
Home: Scroll to the top of the page.
End: Scroll to the bottom of the page.
Page Up: Go to the previous page.
Page Down: Go to the next page.
+/-: Zoom in or out.
Select a device from Home menu
1. Press
.
2. Select [Source], then press OK.
3. Select a device, then press OK.
Update the source list
*: Fit to the width of the page.
If you add or remove a device, update the
source list.
EN
55
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press
2. Press OPTIONS.
3. Select [Scan connections], then press OK.
4. Follow the onscreen instructions.
SOURCE.
After you have switched on Philips EasyLink,
the following features are available:
One-touch play
When you play an HDMI-CEC compliant
device, the TV switches on from standby and
switches to the correct source.
Change device settings
Change the device type
You can change the device type to easily
access it from the Source menu.
One-touch standby
When you press on the TV remote
control, the TV and all HDMI-CEC
compliant devices switch to standby mode.
Auto switch off inactive devices
If a HDMI-CEC compliant device has been
inactive for some time, it switches to standby
mode.
1. Press
SOURCE.
2. Select the device, then press [Device
type].
3. Select a suitable device type, then press
OK.
Rename a device
You can rename a device after it is
connected to the TV.
EasyLink remote control
You can control multiple HDMI-CEC
compliant devices with your TV remote
control.
1. Press
SOURCE.
2. Select the connector, then press
[Rename].
3. Use the on-screen keypad to enter a new
System audio control
If you connect an HDMI-CEC compliant
device that includes speakers through the
HDMI ARC connector, you can choose to
hear the TV audio from those speakers
instead of the TV speakers.
name.
4. When complete, select [Done], then
press OK.
Reset device settings
You can reset the type and name of the
device to default settings.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link to retain
picture quality.
1. In the [Source] menu, select the device
and press OPTIONS.
2. Select [Original name and icon], then
press OK.
Maximise display for subtitled video
Some video subtitles can create a separate
subtitle bar under the video, which limits the
video display area. To maximise the video
display area, you can switch on auto subtitle
shift and display the subtitles on the video
image.
Set up EasyLink devices
What you can do
You can get the most out of your HDMI-
CEC-compliant devices with Philips EasyLink
enhanced control features. Connect your
HDMI-CEC compliant devices through
HDMI to your TV and control them at the
same time with your TV remote control.
What you need
Connect an HDMI-CEC compliant
device to the TV. You can connect
more than one HDMI-CEC device. See
Connect your TV > Connect devices
(Page 46).
Note: Other brands describe HDMI-CEC
functionality differently. Some examples are
Anynet (Samsung), Aquos Link (Sharp) or
BRAVIA Sync (Sony). Not all brands are fully
compatible with Philips EasyLink.
Configure each HDMI-CEC compliant
device properly.
Switch on EasyLink.
EN
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch on EasyLink
1. Press
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
1. Press
.
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
.
3. Select [Auto switch off devices] > [On],
3. Select [EasyLink] > [On], then press OK.
then press OK.
Control devices
Select speaker output
If you connect multiple HDMI-CEC devices
that support this setting, you can control all
such devices through the TV remote control.
If a connected device is HDMI Audio Return
Channel (HDMI ARC) compliant, you can
output TV audio through an HDMI cable.
Additional audio cables are not required.
Make sure you connect the device to the
HDMI ARC connector on the TV. See
Connect your TV > About cables > HDMI
Note: This is an advanced setting. Devices
that do not support this setting cannot
respond to the TV remote control.
1. Press
.
(Page 45).
Switch on HDMI ARC
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink] > [EasyLink remote
control].
1. Press
.
2. Select [Setup] > [TV settings] > [Sound]
3. Select [On] or [Off], then press OK.
> [Advanced] > [HDMI 1 - ARC].
Tips:
3. Select one of the following, then press
OK.
To switch back to TV control, press
then select [Watch TV].
,
[On]: Hear the TV audio through the
connected HDMI-ARC compliant
device.
To control another device, press
then select the device from the Home
menu.
,
[Off]: Hear the TV audio through the
TV speakers, or through a device
connected through the digital audio out
connector.
EasyLink buttons
You can control HDMI-CEC compliant
devices with the following buttons on the TV
remote control:
Note: Make sure that all HDMI-CEC settings
are properly set up on the connected device.
: Switch the TV and the connected
device on or to standby.
Play buttons: Control video or music
Set up TV speakers
1. Press
.
play.
2. Select [Setup] > [TV settings] > [Sound]
Numeric buttons: Select a title, chapter
or track.
OK: Start, pause or resume play on the
connected device, activate a selection,
or access the device menu.
: Display the TV Home menu.
> [Advanced] > [TV speakers].
3. Select an option, then press OK:
[Off]: Switch off TV speakers.
[On]: Switch on TV speakers.
[EasyLink]: Switch off TV speakers and
stream TV audio to a connected
HDMI-CEC audio device.
Switch off connecting devices
You can also set the TV to switch off the
connecting HDMI-CEC compliant devices if
they are not the active source. The TV
switches the connecting device to standby
after 10 minutes of inactivity.
[EasyLink autostart]: When a HDMI-
CEC audio device is connected,
automatically switch off TV speakers
and stream TV audio to the device.
Change TV audio streaming
You can switch audio between TV speakers
and a connected amplifier at any time.
EN
57
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press OPTIONS.
2. Select [Picture and sound] > [Speakers].
Connect to a network and
the Internet
3. Select one of the following, then press
OK.
[TV]: On by default.
What you can do
View Media
If you connect the TV to a home network,
you can play photos, music and videos from
your computer. See Use your TV > Play
Stream TV audio through TV and the
connected HDMI-CEC audio device
until the connected device switches to
system audio control. TV audio is then
streamed through the connected
device.
[Amplifier]: Stream audio through the
Smart TV
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio continues to stream from
the TV speakers. If [EasyLink autostart]
was selected, the TV prompts the
connected device to switch to system
audio mode.
If you connect the TV to a home network
with an Internet connection, you can browse
Smart TV. Smart TV offers Internet services
and websites tailored to your TV. Play music
and videos, consult infotainment, rent movies
and much more. See Use your TV > Smart
Retain picture quality
What you need
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link.
Warning: This TV complies with the EMC
directive only when you use a shielded
Cat5 Ethernet cable.
Switch on Pixel Plus Link
A computer network that includes:
a) A universal plug-and-play (UPnP)
router and
b) A computer with one of the
following operating systems: Microsoft
Windows XP, Microsoft Windows
Vista, Mac OS X or Linux.
1. Press
.
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
3. Select [Pixel Plus Link] > [On], then press
OK.
Maximise video display
To connect your TV to computers, you
need to install and configure a media
server on your computer. See Use
your TV > Play multimedia files (Page
Some subtitles create a separate subtitle bar
under the video that limits the video display
area. To maximise the video display area,
you can switch on auto subtitle shift. The
subtitles are then displayed over the video
image.
To connect your TV to the Internet,
you also need a high-speed connection
to the Internet.
Switch on auto subtitle shift
1. Press
.
Connect
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
3. Select [Auto subtitle shift] > [On], then
press OK.
EN
58
Download from Www.Somanuals.com. All Manuals Search And Download.
You can connect this TV to your home
network through a wired or wireless
connection.
For optimum WiFi performance, place
the TV at a distance of less than 10 m
from the wireless router. Avoid
obstructions such as concrete walls
between the router and the TV.
Reception quality depends on the
location of the wireless router and your
local Internet service provider.
To reduce network traffic, switch off
unused network equipment in the
home network.
When playing video over your wireless
home network, we recommend that
you use an IEEE 802.11 N router. The
connection speed may differ according
to the operating environment of your
wireless home network.
For a wired connection, see Connect
your TV > Connect to a network and
the Internet > Wired connection
(Page 59).
For a wireless connection, see Connect
your TV > Connect to a network and
the Internet > Wi-Fi integrated (Page
Start wireless setup
1. Switch on your wireless network router.
2. Press on the TV remote control.
3. Select [Setup] > [Connect to network],
then press OK.
4. Follow the onscreen instructions.
WPS - Wi-Fi Protected Setup
1. If your router supports Wi-Fi Protected
Setup (WPS), press the WPS button on the
router.
2. After 2 minutes, select [WPS] on the TV,
then press OK.
The TV connects to your network. This
takes about 2 minutes.
Wired connection
1. Switch on the router and switch on its
DHCP setting.
2. Connect the router to the TV with an
Ethernet cable.
3. Press , then select [Setup].
4. Select [Connect to network], then press
OK.
5. Follow the onscreen instructions to install
the network.
6. Wait for the TV to find the network
connection.
7. If you are prompted, agree to the End
User Licence Agreement.
Most new wireless routers have the WPS
system and carry the WPS logo. The WPS
system uses WPS security encryption and
cannot be combined with devices on your
network that use the WEP (Wired
WiFi integrated
This section is only applicable for WiFi-
integrated TVs.
You can connect your TV to your home
network wirelessly.
Equivalent Privacy) security encryption.
If you still need the WEP devices in your
network, install with [Scan] > [Custom].
Scan for routers
If you have several routers in your network,
you can select the network you need.
1. To select a specific network router, press
[Scan] on the first page of the installation.
The routers with WPS and the strongest
signal are shown first in the list on screen.
Note:
The wireless network operates in the
same 2.4 GHz frequency spectrum as
common household devices, such as
Dect phones, microwave ovens or
Bluetooth devices, which can cause
WiFi interference. Move these devices
away from the TV.
2. Select the router you need, then press
OK.
EN
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch on Miracast
If you are connecting to a WPS router,
select [WPS] on the TV.
This TV is a Miracast-certified TV. To
seamlessly display content from a Wi-Fi
device on your TV, switch on Miracast.
If you want to set the PIN code in your
router software to connect, select
[WPS pin] and note down the code.
1. Press
.
2. Select [Setup] > [Network settings] >
[Wi-Fi Miracast].
To enter the encryption key manually,
select [Standard] and enter the key
3. Select [On], then press OK to enable
when prompted.
Miracast.
Set secured connection with WPS
encryption
1. To set the secured connection with a PIN
code, select the [WPS pin] and press OK.
Tip: To clear the history of all Wi-Fi Miracast
devices, select [Setup] > [Network settings]
> [Clear Wi-Fi Miracast devices].
2. Write down the 8-digit PIN code shown
on TV and enter it in the router software on
your PC.
See the router manual for where to enter
the PIN code.
Set secured connection with WPA
encryption
If your router has Wi-Fi Protected Access
(WPA) security, enter the pass phrase with
the remote control.
Switch on remote recording
This TV supports remote recording
scheduled from a Wi-Fi device.
Note: If you switch on remote recording,
the TV consumes more power in standby.
1. Press
.
2. Select [Setup] > [Network settings] >
[MyRemote Recording].
3. Select [On], then press OK.
1. To enter the encryption key manually,
select [Standard] and press OK.
2. To access the onscreen keyboard, select
the text entry field, then press OK.
Connect a CAM
(Conditional Access
Module)
Set secured connection with WEP
encryption
If your router has WEP security, the TV asks
for the WEP encryption key in hexadecimal
numbers.
1. Locate the hexadecimal key in the router
software on your PC and make a note of of
the first key in the WEP keys list.
What you can do
You can watch scrambled digital TV channels
with a Conditional Access Module (CAM).
Once you have inserted the CAM and paid
the subscription fees, you can watch the
programmes.
2. Enter the security key on the TV with the
remote control to connect to the router.
3. If prompted, agree to the End User
Licence Agreement.
This TV supports CI (Common Interface) as
well as CI+. CI+ supports premium HD
digital programmes with a high level of copy
protection.
Network settings
TV network name
If you have more than one TV in your home
network, you can rename this TV to give it a
unique name.
Note: The applications, functions, content
and onscreen messages depend on the CAM
service provider.
1. Press
.
2. Select [Setup] > [Network settings] >
[TV network name], then press OK.
3. Use the onscreen keyboard or the remote
control keypad to enter the name.
EN
60
Download from Www.Somanuals.com. All Manuals Search And Download.
What you need
Caution: To protect the CAM from damage,
insert the CAM as instructed.
Note: Refer to the documentation from
your service operator on how to insert a
smart card into the Conditional Access
Module.
1. Switch off the TV.
2. Follow the directions printed on the CAM
to insert the CAM into the Common
Interface slot at the side of the TV.
Push the CAM in as far as it will go.
3. Switch on the TV, then wait for the CAM
to be activated. This takes a few minutes.
To maintain access to encrypted digital TV
channels, leave the CAM in the slot.
Access CAM services
1. After you insert and activate the CAM,
press OPTIONS.
2. Select [Common interface], then press
OK.
3. Select the CAM provider, then press OK.
EN
61
Download from Www.Somanuals.com. All Manuals Search And Download.
The standby light on the TV blinks red:
Disconnect the power cable from the power
outlet. Wait until the TV cools down before
you reconnect the power cable. If the
blinking reoccurs, contact Philips Consumer
Care.
6 Troubleshooting
General issues
The TV does not switch on:
The TV audio is in the wrong language:
If you select audio language via OPTIONS,
the TV resets to the default language when
you change channels or switch off the TV.
To retain the selected language, change your
audio language by pressing , then selecting
[Setup] > [Channel settings] or [Satellite
settings] > [Languages] > [Primary audio
language] or [Secondary audio language].
Disconnect the power cable from the
power outlet. Wait for one minute
then reconnect it.
Make sure that the power cable is
securely connected.
When you are turning the TV on, off or to
standby, you hear a creaking sound from
the TV chassis:
No action is required. The creaking sound is
due to the normal expansion and
contraction of the TV as it cools and warms
up. This does not affect performance.
The TV or Smart TV menu is in the wrong
language:
Change the menu to your preferred
language.
For more information, see Change your TV
settings > Language settings > Menu
The TV does not respond to remote
control or TV controls when switched on:
The TV requires some time to start up.
During this time, the TV does not respond
to the remote control or TV controls. This is
normal behaviour.
You forgot the 4-digit code to unlock the
channel blocking feature (child lock):
Enter ‘8888’.
You want to upgrade your TV software:
If the TV continues to be unresponsive to
the remote control, view the remote control
sensor through a digital camera – if you
press any button on the remote control and
notice red flickering at the sensor, the
remote control is working but the TV may
need to be checked by Philips Consumer
Care. This troubleshooting procedure is not
applicable to remote controls that are paired
wirelessly with the TV.
download the latest software package for
your TV. Software installation instructions
and release notes indicating what's been
updated are also available at the site. Full
instructions on how to upgrade your TV
software are also available at Change your
When the TV is in standby, a start-up
splash screen is displayed, then the TV
returns to standby mode:
This is normal behaviour. When the TV is
disconnected and reconnected to the power
supply, the startup screen is displayed at the
next startup.
To switch on the TV from standby, press
on the remote control or press any key on
the TV.
Channel issues
You want to install TV channels:
See Change your TV settings > Automatic
installing analogue or digital channels. If you
want to install satellite TV channels, see
Change your TV settings > Satellite settings
(Page 39).
EN
62
Download from Www.Somanuals.com. All Manuals Search And Download.
There is poor picture quality from
connected devices:
No digital channels were found during the
installation:
Make sure that the devices are
connected properly.
See the technical specifications to make
sure that your TV supports DVB-T,
DVB-C or DVB-S in your country.
Make sure that all cables are properly
connected and that the correct
network is selected.
Make sure that the picture settings are
set correctly.
The TV did not save your picture settings:
Make sure that the TV location is set to
Home. You can change and save settings in
this mode.
Previously installed channels do not appear
in the channel list:
The picture does not fit the screen; it is
too big or too small:
Make sure that the correct channel list is
selected.
Change to a different picture format.
You want to rearrange or reorder the
channel list:
After channels have been installed, they
appear in the channel list. For information
about managing channel lists, including
rearranging channels, see Watch TV >
The picture format keeps changing with
different channels:
Instead of the picture format [Auto zoom],
select a different picture format.
The picture position is incorrect:
Picture signals from some devices may not fit
the screen correctly. Check the signal output
of the device.
The picture from broadcasts is scrambled:
You may need a Conditional Access Module
to access content. Check with your service
operator.
Picture issues
The TV is on, but there is no picture or the
picture is distorted:
Make sure that the antenna is properly
connected to the TV.
Make sure that the correct device is
selected as the display source.
Make sure that the external device or
source is properly connected.
An "e-sticker" banner displaying
information appears on the TV display:
The TV is in [Shop] mode. To remove the
e-sticker, set the TV to [Home] mode, then
restart the TV. See Change your TV settings
There is sound but no picture:
Make sure that the picture settings are set
correctly.
The computer display on the TV is not
stable:
Make sure that your PC uses the
supported resolution and refresh rate.
See Specifications > Display
Change the TV picture format to
[Unscaled].
There is poor TV reception from an
antenna connection:
Make sure that the antenna is properly
connected to the TV.
Loud speakers, unearthed audio
devices, neon lights, high buildings and
other large objects can influence
reception quality. If possible, try to
improve the reception quality by
changing the antenna direction or
moving devices away from the TV.
If reception on only one channel is
poor, fine-tune this channel.
Sound issues
There is a picture but sound quality is
poor:
If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
EN
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Make sure that all cables are properly
connected.
Make sure that the volume is not
muted or set to zero.
Make sure that the TV speaker setting
is selected. Press OPTIONS, select
[Picture and sound] > [Speakers], then
select [TV].
Make sure that the TV audio output is
connected to the audio input on the
HDMI-CEC enabled or EasyLink
compliant home theatre device. Sound
should be heard from the home theatre
speakers.
Some devices may require you to
manually enable HDMI audio output. If
HDMI audio is already enabled, but you
still do not hear audio, try changing the
digital audio format of the device to
PCM (Pulse Code Modulation). Refer
to the documentation accompanying
your device for instructions.
You cannot use EasyLink features:
Make sure that your HDMI devices are
HDMI-CEC compatible. EasyLink features
only work with devices that are HDMI-CEC
compatible.
If an HDMI-CEC compliant audio device is
connected to the TV and the TV does not
display any mute or volume icon when the
volume is muted, increased or decreased:
When a HDMI-CEC audio device is
connected this behaviour is normal.
USB device content is not displayed:
Make sure that the USB storage device
is set to Mass Storage Class compliant,
as described in the storage device's
documentation.
Make sure that the USB storage device
is compatible with the TV.
Make sure that the audio and picture
file formats are supported by the TV.
Audio and picture files on your USB
storage device do not play or display
smoothly:
There is a picture but the sound quality is
poor:
Make sure that the sound settings are
correctly set.
The transfer performance of the USB
storage device may limit the data transfer
rate to the TV which causes poor playback.
Connection issues
Network issues
There are problems with HDMI devices:
You want to establish a wireless
connection between your TV and home
network:
Refer to Connect your TV > Connect to a
network and the Internet > Wi-Fi
to connect your TV to your home network
wirelessly.
Note that HDCP (High-bandwidth
Digital Content Protection) support can
delay the time taken for a TV to display
content from an HDMI device.
If the TV does not recognise the HDMI
device and no picture is displayed,
switch the source from one device to
another and back again.
If there are intermittent sound
disruptions, make sure that output
settings from the HDMI device are
correct.
If you use an HDMI-to-DVI adapter or
HDMI to DVI cable, make sure that an
additional audio cable is connected to
AUDIO L/R or AUDIO IN (mini-jack
only).
Smart TV does not work:
Check that the router is properly connected
to the TV and that your router has open
access to the Internet. If your router has a
firewall or security settings, make sure that it
allows Smart TV data to pass through –
check your router documentation for details.
EN
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Note your TV model and serial number
before you contact Philips. These numbers
are printed on the back of the TV and on
the packaging.
Internet access via Smart TV is slow:
Try to improve the signal quality
between the router and TV if you are
accessing the Internet wirelessly. Refer
to the router's documentation for
details.
Always use a fast broadband
connection wherever possible.
Update your TV with the latest
software to ensure browsing speed is
optimal.
Your network is slow:
If you are accessing your PC wirelessly, refer
to the router's documentation to improve
the signal quality between the router and
TV.
Wireless network is distorted or not
found:
Make sure that the wireless network is
not disturbed by microwave ovens,
DECT phones or other neighbouring
Wi-Fi devices.
If the wireless network is not working,
try a wired network connection.
Make sure that the firewalls in your
network allow access to the TV
wireless connection.
Contact Philips
Warning: Do not attempt to repair the TV
yourself. This may cause severe injury,
irreparable damage to your TV or void
your warranty.
If are not able to resolve your problem, refer
to the frequently asked questions (FAQs) for
can also consult and contribute to the Philips
TV community at
If you wish to speak to or email a Philips
representative, contact the Philips Consumer
Care in your country. You can find the
contact details in the leaflet accompanying
EN
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambilight
7 Specifications
Sound
Output power (RMS @ 10% THD):
- PFL5008 and PFL5018: 20 W
- PFL5028 and PFL5038: 24 W
Power and reception
Clear Sound
Mono / Stereo / Secondary audio
programming
Product specifications are subject to change
without notice.
Power
Mains power: AC 220-240 V (50-60
Hz)
Display resolutions
Standby power consumption: < 0.3 W
Ambient temperature: 5 to 40 degree
Celsius
For power consumption, see the
product specifications at
Computer formats - HDMI
(Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 X 720 - 60 Hz
1280 X 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1680 x 1050 - 60 Hz
1920 x 1080 - 60 Hz
The power rating stated on the product
typeplate is the power consumption for this
product during normal household use (IEC
62087 Ed.2). The maximum power rating,
stated between brackets, is used for
electrical safety (IEC 60065 Ed. 7.2).
Reception
Computer formats - VGA
(Resolution - refresh rate)
Antenna input: 75 ohm coaxial (IEC75)
TV system: DVB COFDM 2K/8 K
Video playback: NTSC, PAL, SECAM*
Digital TV: MPEG-4, DVB-T
(Terrestrial), DVB-T2*, DVB-C (Cable),
DVB-S/S2* (Satellite)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1600 x 1200 - 60 Hz
1920 x 1080 - 60 Hz
Tuner bands: VHF, UHF, S-Channel,
Hyperband
•
Available on certain models only.
Video formats
(Resolution - refresh rate)
480i - 60 Hz
480p - 60 Hz
Display and sound
576i - 50 Hz
576p - 50 Hz
720p - 50Hz, 60 Hz
1080i - 50Hz, 60 Hz
1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz
Picture / Display
Display type: LED backlight Full HD
Diagonal size:
- 81 cm / 32 inches
- 107 cm / 42 inches
- 117 cm / 46 inches
- 127 cm / 50 inches
Multimedia
Aspect ratio: 16:9 (widescreen)
Panel resolution: 1920x1080p
Picture enhancement: Pixel Plus HD
Perfect Motion Rate (PMR): 300 Hz
3D: Easy 3D
Note: Multimedia file names must not
exceed 128 characters.
EN
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported multimedia connections
Supported image files
USB: Connect only those USB devices
that consume 500 mA of power or less.
- NTFS, FAT 16 (Read only)
- FAT 32
JPEG: *.jpg, *.jpeg, *.mpo
GIF (87a, 89a): *.gif
PNG: *.png
BMP: *.bmp, *.dib
JPS: *.jps
Ethernet LAN RJ-45
PNS: *.pns
BMS: *.bms
Supported audio/video formats
Supported audio/video formats
Supported audio/video formats
EN
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported audio/video formats
Supported audio/video formats
Supported audio/video formats
Supported audio formats
EN
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported audio formats
Supported subtitle formats
Character encoding
Windows-1250 (CP-1250): Central
Europe and Eastern Europe Latin
(Czech, Hungarian, Polish, Slovak,
Slovenian, Croatian, Romanian, Serbian)
Windows-1251 (CP-1251): Cyrillic
Windows-1252 (CP-1252): Western
Europe Latin
Windows-1253 (CP-1253): Greek
Windows-1254 (CP-1254): Turkish
UTF-8: Multi-byte character encoding
for Unicode
Connectivity
Rear
HDMI 1 ARC: HDMI Audio Return
Channel
HDMI 2
AUDIO IN (DVI): Stereo 3.5 mm mini-
jack
NETWORK: Ethernet LAN RJ-45
SERV. U: Service port
CVBS/Y, Pb, Pr, Audio L/R: Composite
video and audio
Supported DLNA-compliant media server
software
DIGITAL AUDIO OUT: Coaxial
TV ANTENNA: 75 ohm coaxial (IEC)
SCART (RGB/CVBS): SCART adaptor
SAT: F-pin satellite (for certain models
only)
Windows Media Player (Microsoft
Windows)
Twonky Media (Microsoft Windows,
Mac OS X)
Sony Vaio Media Server (Microsoft
Windows)
TVersity (Microsoft Windows)
Nero MediaHome
DiXiM (Microsoft Windows XP)
Macrovision Network Media Server
(Microsoft Windows)
Fuppes (Linux)
Side
CI: Common Interface
HDMI
USB 1 / 2
Headphones: Stereo 3.5 mm mini-jack
Help version
uShare (Linux)
UMv 500812125003 - 20130326
EN
69
Download from Www.Somanuals.com. All Manuals Search And Download.
channels, install (digital) - 32
channels, install (satellite) - 33
channels, logo - 12
8 Index
3
channels, reinstall - 37
channels, rename - 12
channels, sort - 12
3D - 14
3D glasses, care - 5
3D, 2D to 3D - 15
3D, change format - 15
3D, health warning - 5
3D, start - 15
channels, switch - 12
channels, update - 32
child lock - 28
CI - 49
3D, switch off - 15
clock - 28
codecs, supported - 54
Common Interface - 49
computer, play files - 16
Conditional Access Module - 49
connect, computer - 44
connect, digital camcorder - 43
connect, digital camera - 43
connect, disc player - 39
connect, external hard disk - 44
connect, game console - 41
connect, home network - 48
connect, home theatre - 42
connect, Internet - 48
connect, keyboard - 45
connect, mouse - 45
A
Ambilight - 15
Ambilight, lounge light - 16
Ambilight, settings - 16
Ambilight, switch on - 16
amplifier, select output - 47
analogue channels, fine-tune - 32
analogue channels, install - 31
analogue channels, subtitles - 34
audio language - 34
auto subtitle shift - 47
Auto switch off, devices - 47
C
cables - 38
connect, recorder - 40
connect, TV receiver - 39
connect, USB device - 44
connect, video call camera - 44
connected device, rename - 46
connectivity - 57
CAM - 49
CAM, enable - 50
CAM, insert - 49
channel list - 12
channel list, copy - 32
channels - 12
connectivity guide - 8
connectors - 38
channels, favourites - 12
channels, fine-tune (analogue) - 32
channels, hide or unhide - 12
channels, install (analogue) - 31
channels, install (automatic) - 31
contact Philips - 9
controls - 10
EN
70
Download from Www.Somanuals.com. All Manuals Search And Download.
D
H
demo - 35
HbbTV - 19
devices, watch - 45
digital camcorder - 43
digital camera - 43
digital channels, install - 32
digital channels, subtitles - 34
digital radio - 12
HDMI - 38
HDMI ARC - 38
hearing-impaired access - 35
help, onscreen - 8
Help, version - 57
home mode - 35
home network - 48
home theatre, connect - 42
disc player, connect - 39
display resolutions - 54
display specifications - 54
DivX VOD - 18
I
install channels, automatic - 31
Interactive TV - 19
DLNA - 16
DTVi - 19
Internet, connect - 48
Internet, Smart TV - 18
E
EasyLink - 46
K
EasyLink, controls - 47
EasyLink, enable - 46
EasyLink, features - 46
EasyLink, onscreen control - 11
EasyLink, remote control - 47
EasyLink, TV speakers - 47
Energy label - 8
Kensington lock - 5
key beep - 35
L
language, menu - 34
language, subtitles - 34
lock TV - 5
energy-efficient settings - 7
EPG - 14
lounge light - 16
EPG, broadcaster - 14
EPG, Internet - 14
M
media server program - 16
external hard disk - 44
mode, home or shop - 35
Multimedia Home Platform (MHP) - 19
multimedia, play files - 16
F
favourite channels, list - 12
multimedia, play options - 17
multimedia, supported formats - 54
G
game console, connect - 41
game settings - 27
N
network settings - 49
network, connect - 48
games, two player - 27
EN
71
Download from Www.Somanuals.com. All Manuals Search And Download.
network, TV name - 49
O
remote control - 10
rename channels - 12
rename, connected device - 46
rent, online video - 19
online forum - 8
online video, rent - 19
S
P
safety - 4
parental rating - 29
satellite, add or remove - 34
satellite, install channels - 33
satellite, settings - 33
SCART - 38
pause TV - 21
pause TV, USB hard drive - 21
PC, display resolutions - 54
Philips video camera - 44
picture format - 13
schedule, recordings - 23
screen care - 5
picture settings - 30
sensors - 10
picture settings, reset - 31
Pixel Plus link - 47
settings assistant - 30
settings, audio format - 31
settings, game - 27
settings, network - 49
settings, picture - 30
settings, sound - 30
shop mode - 35
placement, stand or wall - 5
placement, tips - 5
play, computer files - 16
play, USB files - 17
power specifications - 54
presets, picture and sound - 13
product support - 8
Skype - 24
Skype, block contact - 25
Skype, contacts - 25
Skype, receive call - 25
Skype, settings - 26
Skype, setup - 24
programme guide - 14
programme guide, broadcaster - 14
programme guide, Internet - 14
R
Skype, sign in - 24
Skype, video call - 25
Skype, voice call - 25
Skype, voicemails - 26
sleep timer - 28
rear controls - 10
record TV, one-touch - 23
record TV, USB hard drive - 22
record, TV programmes - 22
recorder, connect - 40
recordings, delete - 24
recordings, schedule - 23
recordings, watch - 24
recycle - 7
Smart TV - 18
Smart TV, apps - 19
Smart TV, browse - 18
Smart TV, network - 48
Smart TV, start - 18
reinstall - 37
EN
72
Download from Www.Somanuals.com. All Manuals Search And Download.
smartphone control - 11
software, check version - 35
software, digital update - 36
software, Internet update - 36
software, USB update - 36
sound settings - 30
universal access, hearing impaired - 35
universal access, visually impaired - 35
update, source list - 46
USB keyboard - 45
USB mouse - 45
USB, play files - 17
sound settings, reset - 31
sound specifications - 54
source, select - 13
V
video call camera - 44
video store - 19
source, update - 46
visually impaired access - 35
volume - 12
standby - 11
standby LED - 10
subtitles, analog - 34
subtitles, digital - 34
W
Wi-Fi integrated, setup - 48
subtitles, language - 34
sustainability - 7
Y
switch TV on, off - 11
YouTube - 18
YPbPr, component video - 38
T
teletext, search - 28
text 2.5 - 27
text, digital text - 28
text, dual screen - 27
text, enlarge - 27
text, language - 27
text, subpages - 28
text, Table Of Pages - 27
trademarks and copyrights - 7
TV controls - 10
TV guide - 14
TV guide, broadcaster - 14
TV guide, Internet - 14
TV receiver, connect - 39
TV speakers, mute - 12
U
universal access, enable - 34
EN
73
Download from Www.Somanuals.com. All Manuals Search And Download.
All registered and unregistered trademarks are the property of their respective owners. Specifications are subject to change without notice.
Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license
from Koninklijke Philips Electronics N.V.
2013 © TP Vision Netherlands B.V. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|