Philips Flat Panel Television LC07 DVB DFU User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Model  
Serial  
Country  
Austria  
Belgium  
Czech Rep  
Denmark  
Finland  
Number  
0810 000205  
078250145  
800142840  
3525 8759  
09 2311 3415  
0821 611655  
01803 386 852  
0 0800 3122 1280  
0680018189  
01 601 1777  
840320086  
40 6661 5644  
0900 8407  
2270 8111  
0223491504  
2 1359 1442  
0800004537  
902 888 784  
08 5792 9100  
0844 800 544  
0870 900 9070  
Tariff  
0.07/min  
0.06/min  
free  
local  
local  
0.09/min  
0.09/min  
free  
free  
local  
0.08/min  
local  
0.10/min  
local  
local  
local  
free  
0.10/min  
local  
local  
local  
France  
Germany  
Greece  
Hungary  
Ireland  
Italy  
Luxemburg  
Netherlands  
Norway  
Poland  
Portugal  
Slovakia  
Spain  
Sweden  
Switzerland  
UK  
This information is correct at the time of press.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product information  
Recycling  
The model and serial number can be found  
at the rear of the TV and on the  
packaging. For a larger TV, information  
is also on left hand underside of the  
TV.  
The packaging of this product is intended to  
be recycled. Apply to the local authorities for  
correct disposal.  
Disposal of your old product  
Rear of TV  
Left hand  
underside  
of TV  
Your product is designed and manufactured  
with highly quality material and components,  
which can be recycled and reused.When this  
crossed-out wheeled bin symbol is attached  
to a product, it means the product is covered  
by the European Directive 2002/96/EC.  
• Standby Power Consumption for this set  
is less than 1 W.  
• Power Consumption of the set can found  
on the type plate at the rear of theTV.  
• For more specications of the product  
see the product leaet on www.philips.  
com/support.  
Please inform yourself about the local  
separate collection system for electrical and  
electronic products. Please act according to  
your local rules and do not dispose your old  
products with your normal household waste.  
The correct disposal of your old product will  
help prevent potential negative consequences  
for the environment and human health.  
Note  
Specifications and information are  
subject to change without notice.  
• If you need further assistance, please call  
the customer support service in your  
country.The corresponding telephone  
numbers and addresses are given in the  
suppliedWorldwide guarantee booklet.  
Disposal of batteries  
The batteries supplied do not contain the  
heavy metals mercury and cadmium. Please  
check on how to dispose exhausted  
batteries according to local regulations.  
Important  
• AC3 (an audio format) is not supported  
for this set. Use the  
key on the  
remote control to select an alternative  
audio.  
• SomeTV antennas require power from  
theTV set.This set does not support such  
a feature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
1
Introduction...............................3  
9
Services lists  
1.1 Important Information....................... 3  
1.1.1 Stationary images on theTV screen  
.................................................................3  
1.1.2 Electric, Magnetic and  
9.1 Rearrange services..............................15  
9.2 View newTV channels or Listen  
to new Radio stations........................ 15  
Electromagnetic Fields (“EMF”)..... 3  
1.2 What is digitalTV?.............................. 4  
1.3 Digital or Analogue channels?.......... 4  
10  
Service setup............................. 16  
10.1 Add new services................................ 16  
10.2 Reinstall all services............................16  
10.3 Manual install services........................17  
2
Safety..........................................5  
2.1 General..................................................5  
2.2 Care of the screen.............................. 5  
11  
Test reception...........................18  
12  
13  
14  
15  
16  
Preferences................................19  
Access restrictions.....................20  
Setting up your favourites list....21  
Information................................22  
Using the Options menu...........23  
3
Overview of the television keys  
and connectors..........................6  
3.1 Side or top controls........................... 6  
3.2 Rear connectors..................................6  
3.3 Side connectors.................................. 6  
4
Getting started..........................7  
4.1 Before you start...................................7  
4.2 Connect the antenna..........................7  
4.3 Connecting and disconnecting the  
mains.......................................................7  
4.4 Switching on theTV............................7  
4.5 Using the remote control. ................7  
17  
18  
19  
TV Guide ...................................24  
Digital teletext (MHEG)...........25  
Using the Conditional Access  
Module (CAM)...........................26  
5
6
Remote control functions.........8  
20  
21  
Automatic tuning of analogue  
programmes.............................. 27  
Overview of Digital main menu  
and sub-menus...........................10  
Manual tuning of analogue  
programmes.............................. 28  
7
8
Switching on the TV for the  
first time.................................... 13  
22  
23  
24  
Programme sort........................29  
Naming of channel.....................30  
Understanding the information  
on the banner............................ 14  
Selecting your favourite  
programme ...............................31  
8.1 Banner description..............................14  
8.2 Symbols description............................14  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Features  
33  
34  
Troubleshooting........................49  
Glossary..................................... 51  
25.1 Timer......................................................32  
25.2 Parental control...................................33  
25.3 Child lock..............................................34  
25.4 Active control...................................... 34  
26  
27  
28  
29  
30  
Picture and Sound settings...... 35  
Smart Picture and Sound.........36  
Picture formats......................... 37  
Teletext......................................38  
Using the TV as PC monitor  
30.1 Connecting the PC..............................40  
30.2 ControlTV settings while a PC is  
connected ............................................ 40  
31  
Using the TV in HD (High  
Definition) mode  
31.1 Connecting the HD equipment........41  
31.2 ControlTV settings while in HD  
mode...................................................... 41  
31.3 Mode Selection function in Features  
menu.......................................................42  
31.4 Display (native 1080) in Features  
menu.......................................................42  
31.5 Supported input formats................... 43  
32  
Connecting other equipment  
32.1 ConnectVCR and DVD recorder...44  
32.2 Connect Decoder andVCR..............44  
32.3 Connect 2VCRs orVCR and DVD....  
recorder.................................................45  
32.4 Connect a satellite receiver.............. 45  
32.5 Connect a DVD player, Cable box or  
Game console...................................... 46  
32.6 Connect a DVD player, a Satellite  
receiver or Cable box .......................46  
32.7 Connect a PC.......................................47  
32.8 Connect a Camera, Camcorder or  
Game console...................................... 48  
32.9 Connect a Headphone.......................48  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Introduction  
Stock market stickers: presented at the  
bottom of the TV screen;  
Shopping channel logos and pricing  
displays: bright and shown constantly or  
repeatedly in the same location on the  
TV screen.  
Thank you for purchasing this television set.  
This manual contains all information you will  
need to initially install and operate your new  
TV.  
If this instruction manual does not  
give an answer to your problem or  
Examples of still pictures also include  
logos, computer images, time display,  
teletext and images displayed in 4:3  
mode, static images or characters, etc.  
if the troubleshooting page does not solve  
your TV problem, you can call your Local  
Philips Customer or Service Centre. See the  
supplied Worldwide guarantee booklet for  
details. Please have the Model and Product  
number (which you can find at the back or  
the bottom of your television set or on the  
packaging) ready, before calling the Philips  
customer support service.  
Tip:  
Reduce contrast and brightness when  
viewing.  
1.1.2 Electric, Magnetic and  
Electromagnetic Fields (“EMF”)  
• Royal Philips manufactures and sells many  
products targeted at consumers, which,  
like any electronic apparatus, in general  
have the ability to emit and receive  
electromagnetic signals.  
1.1  
Important information  
1.1.1 Stationary images on the TV  
screen  
A characteristic of LCD and Plasma Panels  
is that displaying the same image for a long  
time can cause a permanent after-image to  
remain on the screen.This is called  
phosphor burn in. Normal use of the TV  
should involve the showing of pictures  
that contain constantly moving and changing  
images that fill the screen.  
• One of Philips’ leading Business  
Principles is to take all necessary health  
and safety measures for our products, to  
comply with all applicable legal  
requirements and to stay well within the  
EMF standards applicable at the time of  
producing the products.  
• Philips is committed to develop, produce  
and market products that cause no  
adverse health effects.  
Examples of stationary images (this is not  
an all inclusive list, you may encounter  
others in your viewing).  
• Philips confirms that if its products are  
handled properly for their intended use,  
they are safe to use according to scientific  
evidence available today.  
TV and DVD menus: listings of DVD  
disk content.  
Black bars: when black bars appear at  
the left and right side of the screen, it is  
recommended to change to a picture  
format so that the picture fills the entire  
screen;  
TV channel logo: present a problem if  
they are bright and stationary. Moving  
or low-contrast graphics are less likely  
to cause uneven aging of the screen;  
• Philips plays an active role in the  
development of international EMF and  
safety standards, enabling Philips to  
anticipate further developments in  
standardisation for early integration in its  
products.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 What is digital TV?  
Note  
Digital Television offers a far wider choice  
of TV viewing, free from the interference  
that you may experience on analogue  
TV. It promises to transform television  
viewing into a new whole experience.  
There is a greater selection of wide screen  
programmes. Many of your favourite  
programmes are in wide screen on the  
digital channels - something the analogue TV  
cannot do properly.  
Chapters 6 to 19 contain all the  
information you need to operate your  
TV in the Digital mode. Chapters 20  
to 29 contain all the information and  
instructions you need to operate your  
TV in the Analogue mode.  
There is new whole experience of inter  
activity on digital TV. By using your  
remote control, you can access all kinds  
of information like the digital text which  
is much clearer than the old teletext  
system. It gives you the added enjoyment of  
related information running alongside the  
programme you are watching.You can also  
access an Electronic Programme Guide that  
provides you with a quick and easy way to  
view a complete list of digital programmes as  
you would in a newspaper or TV magazine.  
1.3 Digital or Analogue channels?  
When the television is powered on for the  
first time, it will always be in Digital mode.  
Use the  
key of the remote control to  
switch the TV between analogue and digital  
mode. Use the P + / – or  
to  
keys to select channels.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Safety  
10  
Do not touch any part of the TV,  
power lead, or aerial lead during  
lightning storms.  
2.1  
General  
1
Two people are required to lift and  
Carry a TV that weighs more than 25 kg.  
Improper handling of the TV can cause  
Serious injury.  
11  
12  
Do not leave the TV in stand-by mode  
for an extended period of time. Instead,  
disconnect the TV from the mains.  
2
3
If you place the TV set on a surface,  
Ensure the surface is level and that it can  
The weight of the TV.  
Pull the power lead by the plug - do  
not pull on the power lead. Do not use  
a poor fitting mains socket. Insert the  
plug fully into the mains. If it is loose, it  
may cause arcing and result in fire.  
If you wish to hang your TV on a wall, do  
Not hang the TV yourself.Your TV must  
Be hung by qualified technician. Improper  
hanging can cause the TV to be unsafe.  
X
X
4
5
6
Before you hang your TV on a wall,  
ensure the wall is suitable to carry the  
weight of the TV.  
X
The connections do not have to be made  
before you hang the TV, but the cables  
must be inserted into the TV.  
13  
Do not connect too much equipment  
to the same mains socket. Excess  
equipment can cause overloading and  
result in fire or electric shock.  
Wherever you place or hang the TV,  
ensure that air can circulate freely  
through the ventilation slots. Do not  
position the TV in a confined space.  
2.2 Care of the screen  
7
8
Do not place naked flame sources such  
as lighted candles close to the TV set.  
1
Do not remove the protective sheet  
until you have completed the stand/  
wall mounting and connections. Please  
handle with care.  
Do not place a vase filled with water  
near the TV. Spilling water into the TV  
can result in electric shock. Do not  
operate the TV if water is spilled into  
the set. Unplug the power cord from  
the mains immediately and have the set  
checked by a qualified technician.  
Note  
Use only the soft cloth provided  
to clean the glossy front of the TV.  
2
3
Do not use a cloth that is dripping  
with water. Do not use acetone,  
toluene or alcohol to clean the TV.As a  
safety precaution, unplug the power  
cord from the mains when you clean  
the set.  
9
Do not expose the TV or the batteries  
of the remote control to heat, direct  
sunlight, rain or water.  
X
X
Do not touch, push, rub or strike the  
screen with anything hard as this may  
scratch or damage the screen  
permanently.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Overview of television  
keys and connectors  
The following connectors are located on the  
rear of theTV.  
3.1 Side or top controls  
Use the side or top keys to control power, menu,  
volume and programme number.  
5
6
EXT 1  
(RGB)  
EXT 2  
(CVBS /S-VIDEO)  
POWER  
PROGRAM  
MENU  
VOLUME  
1
CI (Common Interface) slot: to  
connect a CAM (Conditional Access  
Module) and a smart card.  
1
2
3
4
2
3
TV Aerial socket : Insert the aerial  
plug into the 75 Ω : socket.  
HDMI 1 / HDMI 2: to connect to  
set-top box, DVD player/recorder, High  
Definition equipment or Personal  
Computer.  
1
.
POWER  
: to switch theTV on and  
off. Note: For zero power, remove  
the mains cord from the mains socket.  
2
3
PROGRAM + / – : to select  
programmes.  
4
5
EXT4: to connect to equipment like  
DVD, Decoder which have the same  
sockets.  
MENU: to display or close menus.  
The PROGRAM + / – keys can be used  
to select a menu item and theVOLUME  
+ / – keys can be used to enter into  
the selected menu item and make  
adjustments.  
6
EXT 1 (RGB) and  
EXT 2 (CVBS/  
S-VIDEO): connect to equipment like DVD  
player/recorder,VCR, Decoder which  
have similar connections (so called ‘scart  
connections’).  
4
VOLUME + / –: make the volume  
louder or quieter.  
3.3 Side connectors  
These connectors are located on the side of the  
TV.  
3.2 Rear connectors  
1
The rear connectors are located on the rear of  
theTV and face downward.  
EXT 3  
2
1
2
Headphone  
jack to the headphone connector of the  
TV.  
Audio Video: to connect to the camera  
or camcorder.  
: Connect the phono-  
4
1
2
3
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Getting started  
Verify that the mains supply voltage in your  
home corresponds to the voltage printed on  
the sticker at the rear of the TV.  
4.1 Before you start  
Warning: The connections do not  
have to be made before hanging but the  
cables must be inserted into connectors  
of the TV.  
Warning: If the TV is mounted on a  
swivel base or swivel arm, ensure no strain  
is placed on the power cord when the TV  
is swivelled. Strain on the power cord can  
loosen connections.This may cause arcing  
and result in fire.  
4.2 Connect the antenna  
Insert the aerial plug rmly into the 75 Ω :  
aerial socket at the bottom of theTV and in  
the wall antenna socket.  
4.4 Switching on the TV  
To switch on the TV, press the POWER  
key on the side or top controls.A blue/  
green indicator comes on and after a few  
seconds the screen lights up.  
Connectors at rear ofTV  
(facing downward)  
• If the TV set remains in standby mode  
(red indicator), press the PROGRAM + / –  
key on the side or top controls or the  
P + / - key on the remote control.  
4.3 Connecting and Disconnecting the  
mains  
POWER  
PROGRAM  
MENU  
VOLUME  
(Plasma TV) - CAUTION : This a Class 1  
apparatus. It must be connected to a MAINS  
socket out with a protective earthing connection  
.
The appliance coupler of the mains cord on  
the TV is used as the disconnect device  
Ensure the power cord is fully inserted into  
the TV mains socket and the wall socket.  
4.5 Using the Remote Control  
Insert the 2 batteries supplied. Be sure the  
(+) and (-) ends of the batteries line up  
correctly (inside of case is marked.)  
To disconnect from the mains, remove the  
mains cord from the mains socket at the  
back of the TV or remove the plug from the  
wall socket.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Remote control  
functions  
2
Sound mode  
Used to force programmes in Stereo  
and Nicam Stereo to Mono. For  
bilingual programmes, select Dual å or  
Dual » (as indicated on the screen  
during such broadcasts). The Mono  
indication shows up in red when in forced  
position.  
1
2
7
8
9
10  
3
4
In digital mode, å-» displays the list  
of audio languages.  
5
6
3
Subtitles mode  
In digital mode, this key activates or  
deactivates the subtitle mode.  
4
5
MENU  
To call up or exit the TV analogue menus.  
Cursors Up/Down/Left/Right  
(
)
These 4 keys are used for selection and  
adjustment of menu items.  
6
Analogue or Digital mode  
To switch between the television analogue  
and digital mode.  
7
8
Picture Format  
(See page 37).  
AV  
To display Source List to select TV  
(Analogue), Digital TV or connected  
peripheral equipment (EXT 1, EXT 2,  
EXT 3, EXT 4, HDMI 1 or HDMI 2). Use  
the Î ï keys to select source and the  
1
Standby  
Æ /  
key to confirm selection.  
To set the TV to stand-by mode.To  
switch the TV on again, press the  
key once more or press the  
9
Options  
(See page 23)  
to  
, P + / – or  
Note: when the TV is switched on,  
the last viewed mode is displayed.  
key.  
10  
Cancel  
In digital mode, this key functions as an  
exit key for MHEG teletext if there are  
no colour key links that are available to  
exit teletext mode.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
16  
Mute  
Turn off or on sound.  
/
Numerical keys  
/
For direct access to programmes.  
For a two digit programme number, the  
2nd digit must be entered shortly after  
the first digit before the dash  
disappears.  
11  
12  
17 Screen information  
In digital mode, display/exit the  
information banner (see page 14).  
In analogue mode, display/remove the  
programme number, the sound mode,  
the clock and the remaining time of  
the sleep timer.  
13  
14  
20  
21  
18  
19  
Active Control  
15  
16  
Automatically adjusts the picture setting  
for optimal picture quality continuously  
under any signal conditions. (See page  
34).  
17  
18  
19  
22  
23  
Digital TV / Radio  
In digital mode, this key is used to access  
digital radio stations. Press the  
key  
to access radio list. Note :To return  
to digital video mode, press the  
key again.  
20  
TV Guide  
(see page 24)  
21 Programme ( + P – )  
Selects next or previous available  
channel/source (or page in digital menu).  
Alternate channel / Edit or back  
space  
11  
12  
Teletext  
(See page 38-39).  
22  
Digital menu  
In Analogue/Digital mode, it allows you  
to alternate the previously viewed  
programme and the current programme.  
It is also used as an edit or back space  
key when you are naming your favourite  
channel.  
To display / exit from the digital menu  
(when TV is in digital mode).  
13  
14  
OK  
Confirms selection and accesses the  
program list in Digital mode.  
Volume ( + VOL – )  
To turn on sound louder or quieter.  
23  
Smart Picture /Sound  
Accesses a series of predefined picture  
and sound settings (see page 36).  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Overview of Digital  
main menu and  
sub-menus  
1
2
Use the  
control to select Digital mode.  
key of the remote  
From the digital mode, press the  
key to display the setup menu.  
3
Use the Î ï Í Æ keys to navigate,  
select and adjust menu items.  
Setup  
Favourites  
Name  
List 1  
List 2  
Select TV channels.  
Select Radio stations.  
Add all services  
Remove all services  
Name  
Select TV channels.  
Select Radio stations.  
Add all services  
Remove all services  
Name  
List 3  
List 4  
Select TV channels.  
Select Radio stations.  
Add all services  
Remove all services  
Name  
Select TV channels.  
Select Radio stations.  
Add all services  
Remove all services  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Preferences  
Language  
Basque, Catalan, Croatian, Czech, Danish, Dutch,  
English, Finnish, French, Gaelic, Gallegan, German,  
Greek, Hungarian, Italian, Norwegian, Polish,  
Portuguese, Russian, Serb, Slovak, Spanish,  
Swedish,Turkish,Welsh  
Audio  
Subtitle/Teletext  
Subtitling Mode  
On, Off,Auto  
Subtitles for hearing impaired  
System  
Yes, No  
Cesky, Dansk, Deutsch, English, Español,  
Français, Italiano, Magyar, Nederlands,  
Norsk, Polski, Português, Suomi, Svenska  
Location  
Australia,Austria, Belgium, Czech, Denmark,  
Finland, France, Germany, Greece, Hungary,  
Italy, Netherlands, Norway, Poland, Portugal,  
Spain, Sweden, Switzerland, United Kingdom  
Country  
Time zone  
Information  
System software  
Current software version  
Always accept new software  
Yes, No  
On, Off  
Access restrictions  
Set pin code protection  
Maturity rating  
TV channels  
Radio stations  
Change pin code  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Installation  
Rearrange services  
Service lists  
View new TV channels.  
Listen to new Radio Stations.  
Add new services  
Search  
Service setup  
TV channels found.  
Radio stations found.  
Other services found.  
Store  
Discard  
Reinstall all services  
Search  
TV channels found.  
Radio stations found.  
Other services found.  
Store  
Discard  
Manual install service  
Frequency  
Network name  
Signal quality  
Signal strength  
Store  
Discard  
Frequency  
Test reception  
Network name  
Signal quality  
Signal strength  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Switching on the TV  
for the first time  
When you switch on the TV set for the first  
time, a menu will appear on screen.  
5
6
Press the ï key to select Service  
Scan to scan the available analogue and  
digital channels.  
11:28  
Setup  
Press the  
key to start the  
Language  
Country  
English  
Español  
Français  
Italiano  
Magyar  
installation.  
Time Zone  
Service Scan  
Note  
If no digital channels are detected, press  
key to switch to analogue mode.  
Select your preferred language  
Note  
1
Press the Æ key to enter into  
If at some point of time you decide to reset  
to the factory default settings, press and hold  
down the MENU key on the side of the  
TV set for 5 seconds.A menu will appear on  
the screen. Repeat steps 1 - 5 as if this was  
the first time you have turned on the TV.  
This activity will reset both the Digital and  
Analogue mode to factory default settings.  
Language mode and press the Î ï  
keys to select your preferred language.  
2
3
Press the  
selection.  
key to confirm  
Press the Î ï keys to select Country  
or Time Zone and press the Æ key to  
enter into Country or Time Zone  
mode.  
Caution  
If you select a wrong country, the channel  
numbering will not be according to the  
standard for your country and you may not  
receive all services or nothing at all.  
Note  
The Language can be selected independently  
from the Country.  
4
Press the Î ï keys to select your  
preferred Country or Time Zone and  
the  
key to confirm your selection.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Understanding the  
information on  
the banner  
TXT  
When you select a digital programme, an  
information banner is displayed for a few  
seconds at the top of the screen.  
Indicates Analogue Teletext is available  
in Digital mode.  
ù Other languages are available and  
can be selected in the options menu.  
You can also select other languages by  
8.1 Banner description  
pressing the  
key.  
programme  
u
The colour of the symbol (red, green,  
yellow or blue) indicates the selected  
Favourites list.  
preset  
number  
start and  
symbols  
clock  
end time  
2
11:00-11:45  
Snooker  
TXT  
10:38  
Note  
BBC 2  
Minutes left : 22  
A white symbol u will appear if the  
programme is stored in one or more  
of the favourites lists which are currently  
not activated.  
channel name  
programme title  
remaining time  
of programme  
The banner contains information on the  
preset number, channel name, programme  
duration, transmission clock, programme title  
and the time remaining of the current  
programme.  
8.2 Symbols description  
i
More information about this  
programme is available : press the  
key once to display and a second  
time to remove it.  
Subtitling is available : if you want to  
display them, press the  
the key to access the options  
menu and select subtitles.  
key or  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Service lists  
9.1 Rearrange services  
7
8
Press  
is done.  
key to confirm.The exchange  
This menu allows you to change the order  
of  
4
7
Repeat the operations  
all the channels are in the required  
order.  
to  
until  
the stored digital channels and radio stations.  
9
To return to previous menu, press the  
1
2
From the digital mode, press the  
key to display the setup menu.  
Í key.  
10  
Press the  
key to exit the menu.  
Use the ï key to select Installation  
and press Æ twice to select the Service  
lists menu.  
Setup  
Installation  
11:28  
9.2 View new TV channels or Listen  
to new Radio stations  
Service lists  
Rearrange services  
Service setup  
Test reception  
View new TV channels  
This menu allows you to check the  
Listen to new Radio stations  
availability of new TV channels or new radio  
stations that have been launched by the  
broadcaster after the initial installation.  
Manage service lists  
Close  
1
2
From the digital mode, press the  
key to display the setup menu.  
3
Use the Î ï keys to select Rearrange  
Use the ï key to select Installation  
and press Æ twice to select the Service  
lists menu.  
services and press Æ key.  
Setup  
Installation  
11:28  
3
4
Use the Î ï keys to select View new  
TV channels or Listen to new Radio  
stations.  
Rearrange services  
1
2
3
4
5
6
7
8
9
_
_
_
_
_
_
_
_
_
View new TV channels  
Listen to new Radio stations  
If new services are available, press Æ to  
enter into the list and use the Î ï keys  
to move through the list.  
Change preset location of services  
5
6
To return to previous menu, press the Í  
key.  
Close  
4
5
Press the  
key to exit the menu.  
Use the Î ï keys to select the channel  
you want to exchange.  
Press  
key to activate.  
If you want to uninstall the selected  
channel, press the red key.  
6
Select the new channel number by using  
the Î ï.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Service setup  
The search begins and only new  
10.1 Add new services  
channels will be stored and added to  
the channel list menu.The percentage of  
the installation that has been completed  
and the number of channels found is  
displayed.When the search is completed,  
This menu allows you to search for new TV  
channels or radio stations that have been  
launched by the broadcaster after the initial  
installation.  
press the  
services.  
key to accept the new  
1
5
6
From the digital mode, press the  
key to display the setup menu.  
To return to previous menu, press the  
Í key.  
2
3
Use the ï key to select installation and  
press Æ key.  
Press the  
key to exit the menu.  
Select Service setup (ï) and press Æ  
key.  
Setup  
Installation  
11:28  
10.2 Reinstall all services  
Service lists  
Service setup  
Test reception  
Add new services  
This menu allows you to reinstall all the  
digital TV channels and radio stations.  
Reinstall all services  
Manual install services  
1
2
3
4
From the digital mode, press the  
key to display the setup menu.  
Install and manage services  
Close  
Use the ï key to select installation and  
press Æ key.  
Select Service setup (ï) and press Æ  
key.  
4
Press Æ to add new services and press  
key to activate the installation.  
Select Reinstall all services (ï) and  
press Æ key.  
Setup  
Installation Service setup  
11:28  
Add new services  
Reinstall all services  
Manual Install services  
Search  
Setup  
11:28  
TV channels found  
Radio stations found  
Other services found  
Store  
Installation Service setup  
Add new services  
Reinstall all services  
Manual Install services  
Search  
TV channels found  
Radio stations found  
Other services found  
Store  
Discard  
Scan for new services  
Discard  
Close  
Reinstall will remove all service settings  
Close  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Press the  
installation.  
key to start the  
5
Use the  
frequency of your target channel and  
press key to start the searching  
of channels.When the search is  
completed, the menu will indicate the  
number of digital services found.  
to  
key to input  
A search is then made for all digital  
services which are then stored  
automatically.When the search is  
completed, the menu will indicate the  
number of digital services found.  
6
7
6
7
Press the  
key to store the services.  
Press  
key to store the services.  
To return to previous menu, press the  
Í key.  
To return to previous menu, press the  
Í key.  
8
Press the  
key to exit the menu.  
8
Press the  
key to exit the menu.  
10.3 Manual install services  
This menu allows you to manually scan  
services by keying in the frequency of your  
target channel.  
1
2
3
4
From the digital mode, press the  
key to display the setup menu.  
Use the ï key to select installation and  
press Æ key.  
Select Service setup (ï) and press Æ  
key.  
Select Manual install services (ï) and  
press Æ key.  
Setup  
11:28  
Installation > Service setup  
Add new services  
Reinstall all services  
Frequency  
Network name  
Signal quality  
Signal strength  
Services found  
Store  
Manual install services  
Discard  
Manual install services  
Close  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 Test reception  
This menu allows you to check the strength  
of the signal you are receiving through your  
aerial.  
5
6
7
After entering the frequency, use the  
key to exit Frequency slot.  
To return to previous menu, press the  
Í key.  
1
2
From the digital mode, press the  
key to display the setup menu.  
Press the  
key to exit the menu.  
Use the ï key to select Installation  
and press the Æ key.  
Setup  
Installation  
11:28  
Service lists  
Frequency  
Service setup  
Test reception  
Network name  
Signal quality  
Signal strength  
Test signal quality  
Close  
3
4
Use the ï key to select Test  
reception and press the Æ key.You  
obtain an indication of the actual  
programme frequency, the network  
name, the signal quality and strength.  
Use the Æ key to enter the Frequency  
slot and use the  
to  
keys to  
enter the frequency of the digital channel  
you want to test. Use the Æ key to move  
to the next character space.  
If the test reception indicates that  
the signal strength is indeed poor, you  
can try improving, renewing, adjusting  
or updating the aerial. It is however  
advisable to contact a specialised aerial  
installer in order to achieve best results.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Preferences  
This menu allows you to select your  
preferred language or to make changes to  
the location (country and time zone).  
Subtitles for hearing impaired : to  
activate or deactivate the specific subtitling  
for hearing impaired (if made available by  
the broadcaster).  
1
2
From the digital mode, press the  
key to display the setup menu.  
Use the ï key to select Preferences  
and press Æ key.  
System : to select the menu language.  
Note  
If you have selected the wrong language  
for one reason or another and do not  
understand the selected language to operate  
the set, do the following to bring you back  
to your preferred language.  
Setup  
Preferences  
11:28  
Language  
Location  
Audio  
Subtitle / Teletext  
Subtitling Mode  
Press the  
screen.  
key to exit menu from  
Subtitling for hearing impaired  
System  
• Press the  
key again to display menu.  
• Press the key to select the second item  
on the menu and the key to enter into the  
next menu level.  
Select your preferred language  
Close  
• Press the key to again and use the  
to select the fifth menu item.  
key  
3
Select Language or Location (ï) and  
press Æ key.  
• Press the key to enter into the next menu  
level.  
4
Use the Î ï keys to select a setting  
and press Æ key to enter into the sub-  
menu. Make your adjustment and press  
key or Í key to exit.  
• Press the Î ï keys to select correct  
language.  
• Press the  
key to confirm selection.  
key to exit menu from  
5
6
Press the  
screen.  
To return to previous menu, press the  
Í key.  
Location settings  
Press the  
key to exit the menu.  
Country : to select the country where  
you are located.  
Language default settings  
Caution  
Audio : to select the audio sound  
language.  
If you select a wrong country, the  
channel numbering will not be according  
to the standard for your country and  
you may not receive all services or  
nothing at all. Note that the Language  
can be selected independently from the  
Country.  
Subtitle/Teletext : to select the  
subtitle/teletext language.  
Subtitling mode : off, on or auto  
(subtitle only displayed in case of original  
audio transmission).  
Time zone : to select the time zone  
where you are located.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13 Access restrictions  
This menu allows you to set up the access  
restrictions for the digital channels.  
TV channels: select the TV channel you  
want to lock and press key.  
Radio stations: select the radio stations  
you want to lock and press key.  
1
2
3
From the digital mode, press the  
key to display the setup menu.  
Change pin code: press Æ key to  
enter in the menu. Follow the on-screen  
instruction to change your access code.  
The default pin code is 1234. If you have  
forgotten your personal code, you can  
reset to the default pin code (1234) by  
entering the universal code 0711.  
Use the ï key to select Access  
restrictions and press the Æ key.  
Press the Æ key to enter into the  
Set pin code protection menu.  
Access restrictions  
11:28  
Off  
Set pin code protection  
Maturity rating  
On  
Note  
TV channels  
Radio stations  
Change pin code  
The TV is equipped with a Common  
Interface (CI) slot (see page 26).  
This CI module can be obtained when you  
subscribe to service providers like Pay  
TV or other service providers.The  
CI module does not come with the TV  
set.  
Switch pin code protection ‘on’ or ‘off’  
Close  
4
Use the Í Æ keys to set to On option  
and press key to exit.You can then  
access the other adjustments.  
The Access Restrictions menu will show  
the CI Access Restrictions when a CI  
module is installed.The CI module is  
responsible for the messages and texts  
on screen. In case of failure or strange  
behaviour, you must call your CI service  
provider.  
Warning  
The moment you use any kind of access  
restriction, you need to fill in the pin  
code when you schedule a programme  
for recording.  
5
6
To return to previous menu, press the  
Í key.  
Press the  
key to exit the menu.  
Maturity rating : select your preferred  
rating to lock the channel. Maturity rating  
will only block certain programmes if the  
broadcaster provides data with the  
programme.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 Setting up your list of  
favourite channels  
This menu enables you to create a favourite  
list with your preferred TV channels and  
radio stations. For example, each member of  
your family can create his/her own favourites  
list.  
Select TV channels : use the Î ï keys  
to select your favourite TV channels and  
confirm with  
key. Press Í key to exit.  
Select radio stations : use the Î ï  
keys to select your favourite radio stations  
and confirm with  
exit.  
key. Press Í key to  
1
From the digital mode, press the  
key to display the setup menu.  
Add all services : press  
key if you  
want to add all the services into your  
favourites list.  
Setup  
11:28  
Favourites  
Preferences  
Information  
List 1  
List 2  
List 3  
List 4  
Remove all services : press  
you want to remove all the services from  
your favourites list.  
key if  
Access restrictions  
Installation  
5
6
To return to previous menu, press the Í  
key.  
Make changes to your lists of favourite services  
Close  
Press the  
key to exit the menu.  
2
Press Æ to enter into the favourites list  
menu.You have the choice to create  
4 different favourites lists.  
Your favourites list can be selected via  
the options menu (see next page).  
3
Use the Î ï keys to select your  
Favourites list : List 1, List 2, List 3  
or List 4 and press Æ key.  
4
Use the Î ï keys to select a setting and  
press Æ key to enter into the sub-menu.  
Name : use the Í Æ keys to move  
around the name display area (16  
characters) and the P + / – keys to select  
the characters.To edit any character, use  
the  
key. When the name has been  
key to exit.  
entered, press  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15 Information  
This menu provides information about the  
software version and the installation of new  
software.  
Once accepted the download will take  
place at the designated time and date.  
Note  
1
The TV must be put into standby when the  
download is due in order for it to take place.  
From the digital mode, press the  
key to display the setup menu.  
2
Use the ï key to select information and  
Off Air Downloading of new software  
press Æ key twice.  
Whenever a new software is available, it is  
advisable to always accept and download the  
software.  
Setup  
11:28  
• In case new software is available, you  
will see a message when you switch on the  
TV.A message indicating the date and the  
duration of download is indicated in the  
Favourites  
Preferences  
Information  
Access restrictions  
Installation  
System software  
menu. Press the  
key to proceed.  
Important : Leave your TV in standby  
to allow upgrade to take place. Do not  
power off your main switch.  
Provide information on problem reports and installing new software  
Close  
• If a problem occurred during the download  
of the new software, you will be informed  
of the next scheduled software download.  
The software version is displayed.  
3
Use the Æ key to enter the selection  
Press the  
key to proceed to use your  
mode.  
TV normally.  
4
Use the Í Æ keys to select Yes or  
No mode. You can activate the menu  
to automatically accept any software  
update of your digital TV through off-air  
downloading. Normally the product will  
detect if an update is available while it is  
in standby mode. Next time the  
If download is successful, a congratulatory  
message will appear. Press the  
key to  
accept. New software and upgrade  
instructions may also be obtained from the  
5
To return to previous menu, press the  
television is turned on a message will  
appear on the screen indicating new  
Í key.  
software is available. Selecting the  
activates the software download.  
key  
6
Press the  
key to exit the menu.  
The software download menu will give a  
description of the software together with  
the date and time of the download.This  
may update certain menus, functions or  
add new features, but the general way in  
which the TV operates will not change.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Using the Options  
menu  
This menu gives you direct access to the:  
favourites list, the language selection and  
some other selections.  
Audio language : to temporarily  
change the audio sound language.  
To permanently change the audio and  
subtitle languages, use the Preferences  
menu (see page 19).  
1
From the digital mode, press the white  
key to display the options menu.  
Mode : you can choose to only have  
radio stations,TV channels or services  
without audio or video.  
Options  
11:28  
Note (for the UK only)  
The TV list will contain both radio  
stations and TV channels  
None  
List 1  
List 2  
List 3  
List 4  
Favourites  
Subtitle language  
Audio language  
Mode  
Banner duration : to select the  
duration for which the banner is visible.  
Selects the active favourite list  
3
Exit  
Press the white  
menu.  
key to exit the  
2
Use the Î ï keys to select a setting  
and press Æ key to enter the sub-menu.  
Favourites : use the Î ï keys to select  
your favourites list and confirm with  
key.  
Note  
The “none” option deactivates any  
favourites list.To create your own  
favourites list, see page 21.  
Subtitle language : use the Î ï keys  
to temporarily change the language and  
confirm with  
key.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17 TV Guide  
The TV guide is an Electronic Programme  
Guide that provides you with a quick and  
easy way to view a complete list of digital  
programmes as you would in a newspaper or  
TV magazine.You can navigate through the  
list of digital programmes and obtain detailed  
information on the programmes.You can also  
program the TV to provide a digital channel  
to be recorded.  
Top (yellow key) : to go directly to the  
top of the list.  
Close (blue key) : to exit from the TV  
guide.  
Options (white key) : with this menu,  
you can select your favourites list, mode or  
themes.Themes are areas of interest, you  
can for example, decide to display only :  
drama, news, movie, ...  
1
From the digital mode, press the  
key to display the TV guide :  
5
Press the  
display more information about the  
selected programme (if available).  
key if you want to  
1
17:28  
BBC  
6
Now/Next  
Now  
Today  
Next  
Press the  
key to exit the menu.  
Preset/Servcie  
See it saw  
Snooker  
Trisha  
-
1. BBC  
Microsoap  
Ice Skating  
This morning  
-
2. BBC TWO  
3. ITC Channel 3  
4. Channel 4  
5. ITV 2  
Gmtv2  
This afternoon  
6. BBC CHOICE  
Oakie Doke Bodger & Badger  
Top  
Close  
Options  
A list of all the digital programmes in the  
currently selected favourites list is displayed.  
2
Use the ï key to enter into the  
Preset/service list or press Æ key to  
access Today list.  
3
4
Use the Í Æ keys to select a  
programme.  
The TV guide features are displayed  
at the bottom of the screen. Use the  
coloured keys red, green, yellow, blue or  
white to activate them.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 Digital teletext (MHEG)  
Available in U.K. only  
3
When you have finished watching  
teletext, select a different channel with  
P + / – keys or follow the on screen  
instructions to return to picture.  
Digital teletext services differ greatly from  
analogue teletext.When you switch to a  
Digital teletext service, the images you see  
contain graphics and text which are laid out  
and controlled in a manner decided by the  
broadcaster. Some digital channels, which you  
select like any other channel, offer dedicated  
teletext services. Some digital channels also  
offer information on the programme being  
broadcast (a message or an instruction may  
appear on the screen).  
When you switch to a digital channel with  
links to a teletext service, software is  
downloaded in the background to enable the  
teletext function.You will have to wait for a  
while before you press the  
the software download to complete. If you  
press the key before the download is  
complete, there will be a short delay before  
the teletext screen is displayed.  
key to allow  
Under certain circumstances, Digital text or  
interactive services may have priority over  
subtitles.This can result in the subtitles not  
automatically reappearing when leaving Digital  
text or interactive services on a channel  
which is broadcasting subtitles. In these cases,  
subtiltes can be intialised either by toggling  
While navigating the digital teletext, there is  
a short delay while the page downloads.A  
prompt or message is often broadcast on the  
page to let you know the progress.  
the  
key on the remote control or by  
Analogue teletext in Digital mode  
changing channels.  
Note  
Available in all countries  
1
2
To use the digital teletext, follow the  
instructions on screen.  
TXT  
• If you see an icon  
on a digital  
channel without digital teletext services,  
it indicates Analogue Teletext is available  
in Digital mode.  
Depending on the service, you can  
be asked to use the Í Æ Î ï (cursor  
keys),  
(colour keys),  
numerical  
• Press the  
teletext.  
key to access Analogue  
(Teletext On/Off key) and  
sometimes the  
keys.  
/
Note  
If UK country is selected during  
installation, press and hold  
at least 3 seconds.  
Note  
key for  
If no colour key links are available  
in the Digital Teletext to allow you to  
exit teletext mode, use the  
instead.  
key  
To use Analogue Teletext functions, see  
page 38 and 39.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19 Using the Conditional  
Access Module (CAM)  
2
3
The Conditional Access Module (CAM)  
menu provides access to functions contained  
on the CAM. The module can be inserted  
into the Common Interface (CI) slot located  
at the backside (facing downwards) of the TV.  
Some modules come with a viewing  
card.When using this type of module,  
first insert the viewing card into the  
module. Ensure that the arrow on the  
viewing card faces the arrow of the  
module before inserting into the  
module slot.  
Note  
This Common Interface (CI) module does  
not come with the TV set. It can only be  
obtained when you subscribe to service  
providers like Pay TV or other service  
providers.  
Insert the module into the Common  
Interface (CI) slot on the TV.  
4
5
Switch on the TV.  
Press the  
key to display the  
setup menu.  
IMPORTANT  
Always switch the TV off before inserting or  
removing the module.  
6
7
8
Use the ï key to select Access  
restriction and press the Æ key.  
Press the Æ key to enter into the  
Conditional Access Module menu.  
Inserting the CAM  
Press  
button as indicated on the  
screen to access the CAM’s functions.  
1
Switch off the TV.  
IMPORTANT  
Connectors at  
rear ofTV (facing  
downward)  
If no module is inserted, or the module  
is not inserted properly, the Conditional  
Access Module menu will not be displayed.  
(If you have inserted a module, check that  
it is fully inserted in the correct manner as  
mentioned in step 2 above).  
Common  
Interface slot  
The functions that now appear on screen  
are dependent on the contents of the  
selected Conditional Access Module in your  
country. Refer to the instruction supplied  
with the module or contact the vendor.  
Module  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 Automatic tuning of  
analogue programmes  
Auto Store  
This menu allows you to automatically search  
for all the analogue programmes available in  
your region.  
Program  
TV  
3
196 MHz  
Before you automatically search for all the  
analogue programmes, ensure the TV is in  
analogue mode. If it is in digital mode, press  
the  
(Analogue / Digital) key to enter  
the analogue mode.  
IMPORTANT  
To exit or interrupt the search before it  
is completed, press the key. If you  
1
Press the  
key.  
interrupt search during auto store, not all  
channels will be stored. For all channels to  
be stored, you need to do a complete auto  
store search again.  
Main  
Brightness  
Colour  
Picture  
Sound  
Features  
Install  
Contrast  
Sharpness  
Colour Temp  
Contrast+  
NR  
Note  
ATS (Automatic Tuning System)  
feature  
If the transmitter or cable network sends  
the automatic sort signal, the programmes  
will be numbered correctly. In this case, the  
installation is complete. If this is not the case,  
you can use the Sort menu to number the  
programmes to your preference.  
2
Press the Î / ï key repeatedly to  
select Install and the Æ /  
key to  
enter the Install menu.  
Main  
Picture  
Sound  
Features  
Install  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
ACI (Automatic Channel Installation)  
feature  
If a cable system or a TV channel which  
broadcasts ACI is detected, a programme list  
appears.Without ACI broadcast, the channels  
are numbered according to your language  
and country selection.You can use the Sort  
menu to renumber them.  
3
Press the ï key to select Auto Store  
and the Æ / key to start automatic  
searching of the channels.All the  
available TV programmes will be stored.  
This operation takes a few minutes.The  
display shows the progress of the search  
and the number of programmes found.  
Note  
You cannot change the Language or  
Country in Analogue mode. If you want  
to change the Language or Country,  
you have to exit Analogue mode and  
enter into Digital mode to do so (refer to  
Preferences” on page 19).  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21 Manual tuning of  
analogue programmes  
This menu is used to store the programmes  
one at a time.  
5
System:  
Press the Î ï keys to select  
Europe (automatic detection),  
France (LL’ standard),  
UK (I standard),  
1
Press the  
key.  
2
3
4
Press the Î ï keys repeatedly to  
West Europe (BG standard) or  
East Europe (DK standard).  
select Install and the Æ /  
enter the Install menu.  
key to  
Press the Æ /  
key to confirm  
selected system.  
Main  
Picture  
Sound  
Features  
Install  
Auto Store  
Manual Store  
Sort  
6
Search:  
Press the Æ key.The search starts.  
Once a programme is found, the  
scanning stops and its name is displayed  
(if available). Go to the next step. If  
you know the frequency of the  
Name  
Fav. Program  
required programme, this can be  
Press the ï key to select  
Manual Store and the Æ /  
enter Manual Store menu.  
entered directly using the  
keys.  
to  
key to  
7
8
9
Program No.:  
Enter the required number with the  
Install  
System  
Search  
Program No.  
Fine Tune  
Store  
to  
or Î ï keys.  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
Fine Tune:  
If the reception is not satisfactory,  
adjust using the Î ï keys.  
Store:  
To store the changes, press Æ /  
key.The programme is now stored.  
Press the Î ï keys to select the items  
in the Manual Store menu to adjust or  
activate.  
10  
11  
6
9
Repeat steps  
to  
for each  
programme to be stored.  
Manual store  
To return to previous menu, press the  
Í key.  
System  
Europe  
Search  
France  
Program No.  
Fine Tune  
Store  
UK  
West Europe  
East Europe  
12  
To exit the menu, press the  
key.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 Programme Sort  
Sort feature allows you to change the  
programme number for a particular stations.  
Install  
100  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
001  
002  
003  
004  
005  
006  
007  
008  
1
2
Press the  
key.  
Press the Î / ï key repeatedly to  
select Install and the Æ /  
enter the Install menu.  
key to  
5
Main  
Picture  
Sound  
Features  
Install  
Press the Î ï keys to select the new  
programme number and confirm with  
the Í key. (The arrow points to  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
the right and sorting is completed).  
Install  
100  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
001  
002  
003  
004  
005  
006  
007  
008  
3
Press the ï key to select Sort and the  
Æ / key to enter sort mode.  
Install  
100  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
001  
002  
003  
004  
005  
006  
007  
008  
6
4
5
Repeat steps  
and  
for each  
programme number you wish to re-  
number.  
7
8
To return to previous menu, press the  
Í key.  
4
Select the programme number you  
want to move using the Î ï keys and  
the Æ key to enter sorting mode  
(The arrow cursor now points to the  
left).  
To exit the menu, press the  
key.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23 Naming of Channel  
If preferred, you can assign a name to the TV  
channel.  
Install  
106  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
001  
002  
003  
004  
005  
006  
007  
008  
1
2
Press the  
key.  
z
Press the Î / ï key repeatedly to  
select Install and the Æ /  
enter the Install menu.  
key to  
Main  
Picture  
Sound  
Features  
Install  
OK  
7
Press Æ /  
key until the name  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
appears at the top left hand corner  
of the TV screen.The name is now  
stored.  
8
9
To return to previous menu, press the  
Í key.  
3
Press the ï key repeatedly to select  
To exit the menu, press the  
key.  
Name and the Æ /  
key to  
enter Name mode.  
Install  
100  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
001  
002  
003  
004  
005  
006  
007  
008  
4
5
6
Press the Î ï keys to select the  
channel you want to name.  
Press the Æ key to move to the first  
name display area.  
Press the Î ï keys to select the  
characters (maximum of 5 characters)  
and press the Í Æ keys to move  
around the name display area.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 Selecting your  
Favourite Programmes  
This feature allows you to skip programmes  
that you do not watch often and only keep  
your favourite programmes.  
5
Press the Æ /  
key to skip the  
programme.The $ on the right of the  
menu will disappear indicating the  
programme is skipped.  
Note: Once a programme is skipped, you  
cannot access it by the P – / + key.You can  
only access the programme by the Digit 0 -9  
keys.  
100  
Install  
001  
002  
003  
004  
005  
006  
007  
008  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
1
2
Press the  
key.  
Press the Î / ï key repeatedly to  
select Install and the Æ /  
key to  
enter the Install menu.  
6
7
Main  
Picture  
Sound  
Features  
Install  
To return to previous menu, press  
the Í key.  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
To exit the menu, press the  
key.  
Tip  
To add back the skipped programmes to  
3
4
Press the ï key to select  
Fav. Program and the Æ /  
to enter Fav. Program list.  
1
3
key  
your favourites list, repeat steps  
to  
.
• Press the Î / ï key repeatedly to  
Press the Î / ï key repeatedly to  
select programme you want to skip.  
select the skipped programme you want  
to add back to your favourite programme  
list.  
• Press the Æ /  
programme.The $ will appear indicating  
the programme is now restored.  
key to unskip a  
100  
Install  
001  
002  
003  
004  
005  
006  
007  
008  
Auto Store  
Manual Store  
Sort  
Name  
Fav. Program  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25 Features  
25.1 Timer  
Sleep: to select a time period in which  
the set will switch to standby mode upon  
reaching the selected time period.  
The Timer feature allows you to set the TV  
to switch to another channel at a specified  
time while you are watching another  
Select Off option to deactivate the feature.  
channel.You can also use it as an alarm to  
switch on the TV at a specified time from  
standby mode. For the timer to function, the  
set must not be switched off. Once the set  
is switched off, the timer is disabled.  
Note  
During the last minute of a Sleep time  
setting, an on-screen countdown will be  
displayed. Press any button on the remote  
control to cancel the Sleep shut down.  
1
Time: enter the current time.  
Press  
key.  
2
Press Î ï keys repeatedly to select  
Start Time: enter the start time.  
Stop Time: enter the standby time.  
Features and the Æ/  
key to enter  
Features menu.  
Main  
Picture  
Sound  
Program No.: enter the number of the  
channel for the wake-up alarm.  
Timer  
Child Lock  
Features  
Install  
Parental Cont.  
Active Control  
Activate: the settings include:  
Once for a single alarm,  
Daily for each day,  
Off to cancel.  
3
4
Press Æ /  
menu.  
key to access Timer  
6
Press  
key on the remote control to  
put the TV set in standby mode.The  
TV will automatically come on at the  
programmed time. If you leave the TV  
set on, it will just change channel at the  
Start Time and will go to standby  
mode at the Stop Time.  
Press Î ï keys to select a Timer item.  
Timer  
Sleep  
Time  
Start Time  
Stop Time  
Program No.  
Activate  
- - : - -  
5
To make adjustments to the timer  
setting, use the Í, Æ, Î, ï or Digit  
0-9 keys.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25.2 Parental Cont.  
The Parental Cont. feature allows you to  
lock channels to prevent your children from  
watching certain programmes.  
Parental Cont.  
Lock Program  
Change Code  
Clear All  
106  
001  
002  
003  
004  
005  
006  
007  
008  
1
2
Press  
key.  
Lock All  
Press Î ï keys repeatedly to select  
Features and press the Æ/  
key to  
enter Features menu.  
In the Parental Cont. menu, use the Î, ï,  
Í, Æ, Digit 0-9 and keys to access  
and activate the Parental Cont. functions.  
Main  
Picture  
Sound  
Features  
Install  
Timer  
Child Lock  
Parental Cont.  
Active Control  
Description of the settings:  
Lock Program  
Lock individual program. Press Æ key to  
enter Lock Program mode and the Î  
ï keys to select the program to lock or  
unlock. Press the Í Æ keys to lock or  
unlock selected program.A key lock symbol  
+ appears besides the locked channel  
number.To exit from Lock Program mode  
and return to Parental Cont. menu, press  
key.  
3
Press Î ï keys repeatedly to select  
Parental Cont. and press Æ /  
key  
to enter Parental Cont. mode.  
Features  
Timer  
* * * *  
Access Code  
Change Code  
Child Lock  
Parental Cont.  
Active Control  
Key in your new four-digit code using the  
Digit 0-9 keys and confirm by keying in the  
new four-digit again.  
Clear All  
Press Æ key to unlock all locked channels.  
Lock All  
4
5
Key in the access code 0711 by the  
Digit 0-9 keys.A message Incorrect  
will appear. Key in the access code 0711  
again.  
Press Æ key to lock all locked channels.  
Note  
If you switch on the TV set and select a  
program that has been locked, you need  
to key in the Access Code to enter the  
selected locked channel.To unlock the  
channel, go the Lock Program in the  
Parental Cont. menu and press the Í Æ  
keys (key lock symbol + disappears).  
The TV will then prompt you to change  
code. Key in your own 4-digit code by  
the Digit 0-9 keys and confirm the new  
code. Once the new code is confirmed,  
the Parental Cont. menu will appear.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25.4 Active Control  
25.3 Child Lock  
Automatically adjusts the picture setting for  
optimal picture quality continuously under  
any signal conditions.  
The side controls of the TV will be locked  
when you select the On option in the Child  
Lock menu. The TV can still be operated by  
using the remote control.  
1
2
Press  
key.  
1
Press  
key.  
Press Î ï keys repeatedly to select  
Features and press the Æ/  
enter Features menu  
2
Press Î ï keys repeatedly until  
Features is selected and press Æ /  
key to access Features menu.  
key to  
3
Press Î ï keys repeatedly to select  
3
Press ï key to select Child Lock and  
Active Control and press the Æ /  
key to enter Active Control mode.  
press the Æ /  
key to access Child  
Lock mode.  
Features  
Timer  
Child Lock  
Parental Cont.  
Active Control  
Features  
Timer  
Child Lock  
Parental Cont.  
Active Control  
Off  
On  
Off  
On  
4
Press Î ï keys to select On or Off  
option.  
4
Press Î ï keys to select On or Off  
option.  
5
6
Press Æ /  
On or Off option.  
key to activate/deactivate  
5
6
Press Æ /  
On or Off option.  
key to activate/deactivate  
To return to previous menu, press the  
Í key.  
To return to previous menu, press the  
Í key.  
7
To exit the menu, press the  
key.  
7
To exit the menu, press the  
key.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 Picture and Sound  
settings  
You can adjust the picture and sound settings  
in the Picture and Sound menu.  
Contrast: this changes the difference  
between the light and dark tones within the  
contrast range of the TV.  
1
2
Press the  
key.  
Sharpness: this increases or decreases the  
sharpness level to improve details in the  
picture.  
Press the Î ï keys to select Picture  
or Sound.  
3
Press Æ /  
key to enter Picture or  
Colour Temp.: this changes the colour  
setting: Cool (more blue), Normal (balanced)  
or Warm (more red).  
Sound menu.  
Picture  
Brightness  
Colour  
Contrast+: Increases the contrast range of  
the TV. Select On option to activate feature.  
100  
Contrast  
Sharpness  
Colour Temp  
Contrast+  
NR  
63  
NR: improves “noisy” picture (little dots  
on picture) due to weak signal transmission.  
Select On option to activate feature.  
0
Description of the Sound settings  
Equalizer: to adjust the sound tone.  
Sound  
Equalizer  
Balance  
AVL  
120HZ  
200HZ  
500HZ  
1200HZ  
3KHZ  
Balance: this balances the sound on the left  
and right speakers.  
Incr.Surround  
AVL: (Automatic Volume Leveller):  
this is used to limit sudden increases in  
sound, especially on programme change  
or advertising slots.  
7500HZ  
12KHZ  
4
5
Press Î ï keys to select a Picture  
or Sound setting.  
Incr. Surround: select between  
Incredible Surround and Stereo when in  
stereo transmission and between Mono  
and Spatial when in Mono transmission.  
Press Æ /  
key to enter the Picture  
or Sound setting.  
6
7
8
Press Î ï keys to adjust the Picture  
or Sound setting.  
To return to previous menu, press the  
Í key.  
To exit the menu, press the  
key.  
Description of the Picture settings  
Brightness : this changes picture brilliance.  
Colour : this changes the intensity of the  
colour.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27 Smart Picture and  
Sound  
Smart Picture feature offers you a choice  
of 5 picture settings namely : Rich, Natural,  
Soft, Multimedia and Personal.  
Definition of Picture Settings  
Rich  
: Brilliant and sharp picture  
settings suitable for bright  
environment.  
Press the  
button repeatedly to cycle  
through the settings to select your desired  
mode.  
Natural  
Soft  
: Reference mode for living  
room conditions and  
average signals.  
Natural  
Soft  
or  
: Intended for bad-quality  
signals. Suitable for living  
room viewing.  
Multimedia  
Rich  
Personal  
Multimedia : Best for graphical  
Note :The Personal setting is the  
setting that you set up using the Picture  
menu in the main menu.This is the only  
setting in the Smart Picture setting that can  
be changed.All other settings are pre-set at  
the factory for your convenience.  
applications.  
Personal  
: Pictures settings are set to  
your preference.  
Smart Sound feature offers you a choice  
of 4 sound settings namely : Movie, Music,  
Voice, and Personal.  
Definition of Sound Settings  
Movie  
: Emphasize sensation to  
action.  
Press the  
button repeatedly to cycle  
through the settings to select your desired  
mode.  
Music  
: Emphasize low tone.  
Voice  
:
Emphasize high tone.  
Music  
Personal  
: Sound settings are set to  
your preference.  
or  
Voice  
Movie  
Personal  
Note :The Personal setting is the  
setting that you set up using the Sound menu  
in the main menu.This is the only setting in  
the Smart Sound setting that can be changed.  
All other settings are pre-set at the factory  
for your convenience.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Picture Formats  
Picture formats for 4:3 screens  
Press the key to cycle through the different formats.  
4:3  
This format is recommended to display the 4:3 picture using the full  
surface of the screen.  
Expand 4:3  
When this format is selected, the picture is vertically expanded, thus  
reducing the horizontal black bars.  
Compress 16:9  
The format is recommended to compress full screen movie images into  
letter box format.When this format is selected, black horizontal bars can  
be seen at the top and bottom of the TV screen.  
Picture formats for wide screens  
Press the key to cycle through the different formats.  
4:3  
The picture is reproduced in 4:3 format and a black band is displayed on  
either side of the picture.  
Movie Expand 14:9  
The picture is enlarged to 14:9 format, a thin black band remains on both  
sides of the picture. Some of the top and bottom of the picture is clipped off.  
Movie Expand 16:9  
The picture is enlarged to 16:9 format.This mode is recommended  
when displaying pictures which have black bands at the top and bottom  
(letter box format). In this mode, large parts of the top and the bottom of  
the picture are clipped off.  
Subtitle Zoom  
This mode is used to display 4:3 pictures using the full surface of the  
screen leaving the sub-titles visible. Part of the top of the picture is clipped off.  
Super Wide  
This mode is used to display 4:3 pictures using the full surface of the screen  
by enlarging the sides of the picture.  
Widescreen  
The picture is displayed in the original proportions of images transmitted  
in 16:9 format.  
Note : If you display a 4:3 picture in this mode, it will be stretched  
horizontally.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
Teletext  
1
Teletext On/Off  
Teletext is an information system broadcast by  
certain channels which can be consulted like a  
newspaper. It also offers access to subtitles for  
viewers with hearing problems  
or who are not familiar with the transmission  
audio language (cable networks, satellite  
channels, etc.).  
Press this key to switch on teletext  
display.A contents page appears with a  
list of items that can be accessed. Each  
item has a corresponding 3 digit page  
number. If the selected channel does not  
broadcast teletext, the indication 100  
will be displayed and the screen will  
remain blank. Proceed to exit teletext  
by pressing the  
key again.  
2
Selecting a page  
5
Enter the number of the page required  
using the 0 to 9 keys or P –/+ keys.  
Example: page 120, enter 120.The  
number is displayed at the top left  
corner of the screen.When the page is  
located, the counter stops searching and  
the page is displayed. Repeat this  
1
3
operation to view another page. If the  
counter continues to search, this means  
that the page is not transmitted. In that  
case, select another number.  
3
Direct access to the items  
2
Colour areas are displayed at the  
bottom of the screen.The 4 colour  
keys are used to access the items or  
corresponding pages.The colour areas  
ash when the item or the page is not  
yet available.  
2
4
4
5
Contents  
This returns you to the contents page  
(usually page 100 or hit list menu).  
Page hold  
Certain pages contain sub-pages which  
are automatically displayed successively.  
This key is used to stop or resume  
sub-page progression.The indication  
appears top left. Use the Í Æ keys to  
select previous or next sub-page.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Picture/Teletext  
• Press the  
• Press the  
key.  
key to show Teletext on  
the right and the picture on the left of  
the screen.  
9
9
6
8
• Press the  
key to return to a full  
teletext mode.  
• Press the  
9
key to return to a full  
screen picture.  
7
7
9
Favourite pages  
Note: only available in RF Analogue.  
Instead of the standard colour areas  
displayed at the bottom of the screen,  
you can store 4 favourite pages on the  
rst 40 channels which can then be  
accessed using the coloured keys (red,  
green, yellow, blue). Once set, these  
favourite pages will become the default  
every time teletext is selected.  
9
9
To store the favourite pages, proceed as  
follows:  
• Press the  
key to change to  
favourite page mode.  
• Use the  
keys to enter the  
teletext page that you want to store as  
a favourite page.  
• Press and hold the colour key of your  
choice for about 5 seconds.The page is  
now stored.  
• Repeat steps 2 to 3 with the other  
colour keys.  
6
7
Hidden information  
To display or hide the concealed  
information such as solutions to games  
or riddles.  
To exit favourite page mode, press the  
key.To exit teletext mode,  
press  
Note  
key.  
Enlarge a page  
This allows you to display the top or  
bottom part of the page. Pressing it  
again will return the page to normal size.  
To clear favourite pages, press and hold  
key for about 5 seconds.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 Using the TV as a PC  
Monitor  
3
Press the Î ï key to select the  
settings and the Í Æ key to select or  
adjust setting.  
To return to previous menu, press the  
Í key.  
Your TV can be used as a computer monitor.  
Note : PC connection is only available  
via HDMI connector. VGA connection is  
not supported.  
4
5
30.1  
Connecting the PC equipment  
To exit the menu, press the  
key.  
Important  
For the TV to function as a PC monitor, the  
following steps must be taken.  
Picture menu  
• The Picture menu comprises  
Brightness, Contrast, Sharpness,  
Colour Temp., Contrast+ Horizontal  
Shift and Vertical Shift features.  
• Except for the Horizontal Shift and the  
Vertical Shift features, all the other  
features work exactly in the same way  
as the features in the TV Picture menu  
(see page 35).  
Horizontal Shift feature allows you to  
adjust horizontal position of the image.  
Vertical Shift feature allows you to  
adjust vertical position of the image.  
1
Connect the DVI output of your  
computer to the HDMI 1 or HDMI 2  
connector of theTV. Use a HDMI to  
DVI cable if the DVI output is to be  
connected.  
2
Connect the audio cable to the PC’s  
Audio jack and to the L / R Audio jacks  
(EXT3) of theTV.  
3
Press the  
key to display Source  
List and use the Î ï key to select  
HDMI 1 or HDMI 2.  
Features menu  
Source list  
TV  
• The Features menu comprises Mode  
Selection and Format features.  
• When you connect PC supporting  
resolutions of 480p or 720p, the Mode  
Selection item will be available in the  
Features menu.This will allow you to  
select between the PC and HD mode.  
Format feature works exactly in the same  
way as the picture formats of the TV. (see  
page 37).  
EXT 1  
EXT 2  
EXT 3  
EXT 4  
HDMI 1  
HDMI 2  
Digital TV  
4
Press the Æ /  
selected source.  
key to switch to the  
Note : When using HDMI to connect  
your TV to the PC, it is possible that they may  
not operate perfectly first time. Often this is  
resolved by changing the resolution or settings  
of the device connected to the TV. In some  
situations you may see a dialogue box on  
screen and need to press ”OK” to continue  
watching the TV. Please refer to the user  
manual of the connected device on how to  
make necessary changes.  
30.2  
Control TV settings while a  
PC is connected  
1
2
Press the  
menu.  
key to display the main  
Press the Î ï keys to select Picture,  
Sound or Features and the Æ /  
key to enter the selected item menu.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31 Using the TV in HD  
(High Definition) mode  
The HD (High Definition) mode allows you  
to enjoy clearer and sharper pictures if you  
are using HD equipment that can produce  
high definition video signals.  
31.2  
Control TV settings while in  
HD mode  
1
2
Press the  
menu.  
key to display the main  
31.1  
Connecting the HD equipment  
Press the Î ï keys to select Picture,  
Sound or Features and the Æ /  
key to enter the selected item menu.  
Important: For the TV to function in the  
HD mode, the following steps must be taken.  
3
Press the Î ï key to select the  
settings and the Í Æ key to select or  
adjust setting.  
1
Connect the HDMI or DVI output of  
your HD equipment to the HDMI 1 or  
HDMI 2 connector of theTV. Use a  
DVI to HDMI cable if DVI output is  
connected.You can also connect the  
ComponentVideo Outputs (Y, Pb, Pr)  
of the HD equipment (if any) to the  
ComponentVideo Inputs (Ext 4) of the  
TV.  
4
5
To return to previous menu, press the  
Í key.  
To exit the menu, press the  
key.  
Picture menu  
• The Picture menu comprises Brightness,  
Colour, Contrast, Sharpness, Colour  
Temp., Contrast+, Horizontal Shift,  
and Vertical Shift.  
2
3
Connect the audio cable to the Audio  
jack of the HD equipment and to the  
L / R Audio jacks (EXT3) of theTV .  
• Except for the Horizontal Shift and the  
Vertical Shift features, all the other  
functions work exactly in the same way  
as the features in the TV Picture menu  
(see page 35).  
Press the  
key to display Source  
List and use the Î ï key to select  
HDMI 1 or HDMI 2 (or EXT 4 if you  
usingYPbPr connection).  
Horizontal Shift feature allows you to  
adjust horizontal position of the image.  
Source list  
TV  
EXT 1  
EXT 2  
EXT 3  
EXT 4  
Vertical Shift feature allows you to  
HDMI 1  
HDMI 2  
Digital TV  
adjust vertical position of the image.  
Sound menu  
• The Sound menu comprises Equalizer,  
Balance, AVL and Incredible  
Surround features and work exactly  
in the same way as the TV Sound menu  
(see page 35).  
4
Press the Æ /  
selected source.  
key to switch to the  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features menu  
4
5
6
Press the Æ key to access Mode  
Selection mode.  
• The Features menu comprises Timer,  
Child Lock, Parental Cont., Mode  
Selection and Active Control features.  
Except for Mode Selection feature, all  
the other features work exactly in the  
same way as the TV Sound menu (see  
pages 34-36).  
Press the Î ï keys to select PC or HD  
mode.  
To return to previous menu, press the  
Í key.  
7
To exit the menu, press the  
key.  
31. 3  
Mode Selection in Features  
menu  
31. 4  
Display (native 1080) in  
Features menu  
When you connect HD (High Definition)  
equipment (HDMI only) supporting  
resolution of 480p or 720p, the Mode  
Selection feature will be available in the  
Features menu.The Mode Selection  
allows you to select between the PC and  
HD mode.  
Note  
This Display (native 1080) feature is only  
applicable to 1080p models only.  
When you connect HD (High Definition)  
equipment (HDMI orY, Pb, Pr) supporting  
resolution of 1080i, the Display (native  
1080) feature will be available in the  
Features menu.This feature allows you to  
watch the original HD format (1080i only).  
This is a true HD resolution from your input  
signals.  
1
2
Press  
key.  
Press Î ï keys repeatedly until  
Features is selected and press Æ /  
key to access Features menu.  
3
Press ï key to select Mode Selection.  
1
2
Press  
key.  
Features  
Timer  
Child Lock  
Parental Lock  
Mode Selection  
Active Control  
PC  
HD  
Press Î ï keys repeatedly until  
Features is selected and press Æ /  
key to access Features menu.  
3
Press ï key to select Display.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31. 5  
Supported input formats  
20” models only  
Features  
Timer  
native 1080  
Child Lock  
Parental Lock  
Active Control  
Display  
SD  
480i  
576i  
All models except 20”  
4
5
Press the Æ key to access Display  
mode.  
HD  
SD  
720p  
1080i  
1080p  
Press the Æ key twice to access the  
Off/On option in the native 1080  
480i  
576i  
.
Display  
Note  
Off  
On  
native 1080  
SD (Standard Definition) Formats are forYPbPr  
connection only.  
Note  
Your Philips TV is HDMI compliant. If you do  
not get a good picture, please change the video  
format on your device (DVD player, cable  
set-top box, etc.) to a standard format. For  
example, for DVD player, select 720p, 1080i  
or 1080p.  
6
Press the Î ï keys to select Off/On  
option. Select On option to allow you to  
watch original HD format (1080i only).  
Please note that this is not a defect of  
the TV set.  
7
8
To return to previous menu, press the  
Í key.  
To exit the menu, press the  
key.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 Connecting other  
equipment  
32.1 Connect VCR or DVD recorder  
With a Eurocable  
Connectors at  
rear ofTV (facing  
downward)  
Cable  
1
1
2
Connect the aerial cables  
as shown.  
and  
1
3
2
3
Connect the Eurocable  
Press the  
as shown.  
key on the remote  
2
control display Source list.  
4
Press the ï key repeatedly to select  
EXT2 and press the Æ /  
confirm selection.  
key to  
Connectors at  
rear ofTV (facing  
backward)  
32.2 Connect Decoder and VCR  
4
Connect a Eurocable  
to your decoder  
Connectors at  
rear ofTV (facing  
downward)  
and to the special euroconnector of your  
recorder. See also the user manual of your  
recorder.  
Cable  
1
Warning  
Do not place your recorder too close to the  
screen as some recorders may be  
susceptible for signals from the display.  
Keep a minimum distance of 0,5 m from the  
screen.  
3
2
Recorder  
Tip  
With the aerial cable only  
You can also connect your decoder directly  
to EXT1 or EXT2 with a Eurocable.  
1
1
2
Connect the aerial cables  
and  
as shown.  
2
Tune in your recorder’s test signal and  
4
store the test signal under programme  
number 0.  
(See “Manual tuning of analogue  
programmes”, page 28. See also the  
user manual of your recorder).  
Decoder  
Recorder  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32.3 Connect 2 VCRs or VCR and  
DVD recorder  
32.4 Connect a satellite receiver  
With a Eurocable  
With Eurocables  
1
1
2
Connect the aerial cables  
shown.  
and  
as  
1
2
1
2
Connect the aerial cables  
,
3
and  
as shown.  
2
3
4
Connect your satellite receiver to  
EXT1 or EXT2 with a Eurocable  
Connect yourVCRs or DVD-recorder  
to EXT1 and EXT2 with the  
3
.
Press the  
control to display Source list.  
Press the ï key to select EXT1 or  
key on the remote  
4
5
Eurocables  
and  
.
3
4
Press the  
key on the remote  
control to display Source list.  
Press the ï key to select EXT1 or  
EXT2 and press the Æ/  
confirm selection.  
key to  
EXT2 and press the Æ/  
key to  
confirm selection.  
With Component Video connectors  
With the aerial cables only  
See “Connect a DVD player, a satellite  
receiver or a cable box” on page 46.  
1
1
2
Connect the aerial cables  
,
3
and  
as shown.  
2
Tune in your recorder’s test signal and  
store the test signal under programme  
number 0.  
(See “Manual tuning of analogue  
programmes”, page 28. See also the  
user manual of your recorder).  
Connectors at  
rear ofTV (facing  
backward)  
Connectors at  
rear ofTV (facing  
downward)  
Connectors at  
rear ofTV (facing  
backward)  
1
Connectors at  
rear ofTV (facing  
downward)  
2
Cable  
3
1
Satellite receiver / cable box  
3
5
4
2
Recorder  
Recorder  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32.5 Connect a DVD player, Cable  
box or game console  
3
4
Press the  
control to display Source list.  
key on the remote  
With a HDMI connector  
Press the ï key to select EXT 4 and  
press the Æ/  
selection.  
key to confirm  
HDMI is the leading new standard for Digital  
video and audio inter-connection.  
5
In case of a cable box and/or a satellite  
receiver also connect the cableTV  
cable and/or the satellite antenna  
1
Connect your equipment with the  
HDMI connector.  
3
4
cable  
and the aerial cable  
.
2
3
Press the  
control to display Source list.  
key on the remote  
Connectors at rear ofTV  
(facing downward)  
Press the ï key to select HDMI 1 or  
HDMI 2 and press the Æ/  
key to  
confirm selection.  
Connectors at rear ofTV  
(facing downward)  
1
2
DVD  
Connectors at rear ofTV  
(facing downward)  
32.6 Connect a DVD player, a  
Satellite receiver or Cable box  
With Component Video Connectors  
1
1
Connect the three separate component  
2
1
video cables  
to theYPbPr jacks on  
4
the DVD player and to theY (yellow),  
Pb (blue) and Pr (red) jacks of EXT4  
on theTV.  
2
Connect the audio cable to the DVD’s  
audio L and R jacks and to the L/R  
3
Satellite receiver / cable box  
2
AUDIO jack of EXT4  
.
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connectors at rear of  
TV (facing downward)  
Connectors  
at side ofTV  
Note  
Audio  
• Cables are often colour coded. Connect  
red to red, white to white, etc.;  
L/R  
• The labels for the component video  
sockets may differ depending on the DVD  
player connected.Although the  
abbreviations may vary, the letters B and  
R stand for the blue and red component  
signals, respectively, andY indicates the  
luminance signal. Refer to the DVD  
player’s instructions for use for  
HDMI  
DVI  
2
1
definitions and connection details;  
To get an optimal viewing, it is advised to  
switch your equipment to the highest  
possible supported display modes.  
PC  
PC equipped with a DVI connector  
Warning  
1
2
Use a DVI to HDMI cable to connect  
to one of the HDMI connectors of your  
If you notice scrolling images,  
1
TV  
.
wrong colours or no colour, no picture, or  
even combinations of these on your screen,  
verify if the connections are done in the  
correct way and if the resolution and the  
signal standard of the connected equipment  
are set in the right way. See the user manual  
for your equipment.  
Connect the audio cable to the PC’s  
AUDIO jack and to the L/R AUDIO  
2
jacks ofTV EXT3  
.
3
4
Press the key on the remote  
control to display Source list.  
Press the ï key to select HDMI 1 or  
HDMI 2 and press the Æ/  
key  
to confirm selection.  
Supported PC resolutions  
32.7 Connect a PC  
Note  
640 x 480, 60 Hz  
640 x 480, 72 Hz  
640 x 480, 75 Hz  
640 x 480, 85 Hz  
800 x 600, 60 Hz  
800 x 600, 72 Hz  
800 x 600, 75 Hz  
800 x 600, 85 Hz  
1024 x 768, 60 Hz  
1024 x 768, 70 Hz  
1024 x 768, 75 Hz  
1024 x 768, 85 Hz  
• Only digital output of the PC can be  
connected via DVI to HDMI cable.  
VGA connection is not supported.  
PC resolutions for LCDTV.  
Not applicable to 20” LCDTV  
or PlasmaTV  
• Before connecting your PC to theTV,  
select your PC monitor settings to a  
refresh frequency of 60 Hz.  
1280 x 768, 60 Hz  
1280 x 1024, 60 Hz  
1360 x 768, 60 Hz  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32.8 Connect a Camera, Camcorder,  
Game console  
32.9. Connect a Headphone  
1 Connect your camera, camcorder or  
game console.  
1 Insert the plug into the headphone  
socket as shown.  
2 For mono equipment, connect to  
2 The headphone impedance must be  
between 8 and 4000 Ohm.The  
2
3
VIDEO  
and AUDIO L  
(only).  
For stereo equipment, connect both  
headphone socket has a 3.5 mm jack.  
3
AUDIO L and AUDIO R  
.
S-VHS quality with an S-VHS camcorder  
is obtained by connecting the S-VHS  
Tip  
Press the  
control to switch off the sound from  
internal loudspeakers of theTV.  
To switch on sound, press the  
key again.  
1
cables with the S-VIDEO input  
and  
key on the remote  
3
AUDIO L / R inputs  
.
1
Warning: do not connect cables  
2
and  
at the same time.This may cause  
picture distortion.  
3
Press the  
key on the remote  
control to display Source list.  
4 Press the ï key to select EXT 3 and  
press the Æ/  
key to confirm  
selection.  
Connectors at side ofTV  
3
Connectors at side ofTV  
2
1
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Troubleshooting  
Below is a list of symptoms you may encounter with your TV. Before you call for service,  
make these simple checks.  
Symptom  
Possible solutions  
No display on screen  
• Check whether power cord is properly connected into the  
mains socket and to your TV. If there is still no power,  
disconnect plug.Wait for 60 seconds and re-insert plug.  
Switch on TV again.  
• Press the  
key on the remote control.  
Poor reception  
(snowy noise)  
• Check antenna connection to the TV and to the wall antenna  
socket.  
Try manually adjusting your picture (see page 28).  
Have you chosen the right TV system? (see to page 28).  
Press the key to check the signal strength.  
No picture  
Verify if the supplied cables are connected properly (The  
aerial cable to the TV, the other aerial to your recorder, the  
power cables,....).  
Verify if you have selected the correct source.  
Verify if the child lock has been switched off.  
No sound on  
Check whether the correct TV system is selected (see page 28).  
certain channels  
No sound  
Verify if the volume is not at the minimum.  
• Check that the mute (  
is on, press the  
) mode is not on. If mute mode  
key to deactivate mute mode.  
Verify the connections between the optional equipment and  
the TV.  
Sound interference  
Try switching off any electrical appliances to prevent  
interference, for example, hair dryer, vacuum cleaner.  
Unable to understand  
the selected language  
on screen to operate  
set in digital mode  
Press the  
key to exit menu from screen.  
• Press the  
key again to display menu.  
• Press the key to select the second item on the menu and  
the key to enter into the next menu level.  
• Press the key again and use the  
menu item.  
key to select the fifth  
• Press the key to enter into the next menu level.  
• Press the Î ï keys to select correct language.  
• Press the  
Press the  
key to confirm selection.  
key to exit menu.  
TV not responding  
to remote control  
• Move closer to the receiver at the front of the TV.  
Check the placement of the batteries.  
Try changing the batteries.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Possible solutions  
No digital channels  
• Contact your dealer about the DigitalVideo  
Broadcasting Terrestrial signal availability in your country.  
One or a few tiny spots on  
the screen that do not  
change colour along with  
the video picture  
• This symptom is not a problem.The liquid crystal  
panel is built with very high precision technology  
giving you the fine picture details. Occasionally, a  
few non-active pixels may appear on the screen  
as a fixed point of red, blue, green or black.  
Note : this does not affect the performance  
of the set.  
Intermittent or flickering • Noise is displayed if the connected digital equipment such  
picture in HD mode  
as DVD player or Set-Top box failed. Check user  
manual of the digital equipment you are connecting.  
• Use a standard-compliant (high-quality) HDMI to DVI  
cable.  
No sound or picture but  
front panel red light is on  
• Press the  
key on the remote control.  
PC modes do not  
work  
• Check whether connections are correct. (see page 47).  
• Check whether the source is correctly selected.  
Press  
button to enter Source list and select the  
correct source.  
• Check whether you have configured the computer to  
a compatible display resolution (see page 47).  
• Check graphic card setting of PC.  
S-Video colour  
becomes faint  
• Check whether SVHS cable is properly connected.  
• Press the P + key on the remote control to do a  
channel up and then press the P – key to do a  
channel down.  
Black bar on top and  
bottom of screen in  
PC mode  
• Change PC refresh rate to 60 Hz.  
AC3 not available  
• AC3 is not supported for this set. Use the  
on the remote control to select an alternative audio.  
key  
TV antenna cannot be  
powered by set  
• SomeTV antennas need to be powered by the set.  
This set does not support such a feature.  
Changing from one  
channel to another  
channel takes a long time  
• Pay TV channels are encoded by the cable provider and  
take a longer time to decode.This is normal behaviour  
and no action is required.  
Cannot access digital  
menu  
• Check whether TV is in analogue mode. If it is, press  
key to switch to digital mode.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
Glossary  
DVI (DigitalVisual Interface) :A digital interface  
standard created by the Digital DisplayWorking  
Group (DDWG) to convert analog signals into  
digital signals to accommodate both analog and  
digital monitors.  
HDMI (High-Denition Multimedia Interface)  
: Provides an uncompressed, all digital audio/video  
interface between theTV and any HDMI-equipped  
audio/video component, such as set-top box, DVD  
player and A/V receiver. HDMI supports enhanced  
or high-denition video plus two-channel digital  
audio.  
RGB signals :These are the three video  
signals, Red Green Blue, which make up the  
picture. Using these signals improves picture  
quality.  
System :Television pictures are not broadcast in  
the same way in all countries.There are different  
standards: BG, DK, I, and LL’.The System setting  
(page 28) is used to select these different standards.  
This is not to be confused with PAL or SECAM  
colour coding. PAL is used in most countries in  
Europe, SECAM in France, Russia and most African  
countries.The United States and Japan use a  
different system called NTSC.  
S-VHS signals :These are 2 separate  
Y/C video signals from the S-VHS and Hi-8  
recording standards.The luminance signalsY  
(black and white) and chrominance signals C  
(colour) are recorded separately on the tape.  
This provides better picture quality than with  
standard video (VHS and 8 mm) where theY/C  
signals are combined to provide only one video  
signal.  
MPEG (Moving Picture Experts Group) is  
the nickname given to a family of International  
Standards used for coding audio-visual  
16:9 : Refers to the ratio between the  
length and height of the screen.Wide screen  
televisions have a ratio of 16/9, conventional  
screenTV sets have a ratio of 4/3.  
information in a digital compressed format.  
MHEG (Multimedia and Hypermedia  
information coding Expert Group) : provides  
standards for the coded representation of  
multimedia and hypermedia information objects  
that are interchanged among applications  
and services using a variety of media.The  
objects dene the structure of a multimedia  
hypermedia presentation.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important  
Information for users in the UK (not  
applicable outside the UK)  
This apparatus is tted with an approved  
moulded 13 AMP plug. Should it become  
necessary to replace the mains fuse, this  
must be replaced with a fuse of the same  
value as indicated on the plug.  
Positioning the TV  
For the best results, choose a position where  
light does not fall directly on the screen, and  
at some distance away from radiators or  
other sources of heat. Leave a space of at  
least 5 cm all around theTV for ventilation,  
making sure that curtains, cupboards etc. can-  
not obstruct the air ow through the ventila-  
tion apertures.TheTV is intended for use  
in a domestic environment only and should  
never be operated or stored in excessively  
hot or humid atmospheres.  
1
2
Remove fuse cover and fuse.  
The replacement fuse must comply with  
BS 1362 and have the ASTA approval  
mark. If the fuse is lost, make contact  
with your retailer in order to verify the  
correct type.  
3
Ret the fuse cover.  
If for any reason the tted plug is not  
suitable for your socket outlet, please  
consult your retailer or a qualied  
electrician before proceeding with the  
installation.  
General Points  
Please take note of the section entitled ‘Tips’  
at the end of this booklet.  
Connecting the aerial  
Interference  
The aerial should be connected to the  
socket marked : at the back of the set.An  
inferior aerial is likely to result in a poor,  
perhaps unstable picture with ghost images  
and lack of contrast. Make-shift loft or set-  
top aerials are often inadequate.Your dealer  
will know from experience the most suitable  
type for your locality. Should you wish to use  
the set in conjunction with  
The Department ofTrade and Industry  
operates a Radio Interference Investigation  
Service to helpTV licence holders improve  
reception of BBC and IBA programmes  
where they are being spoilt by interference.  
If your dealer cannot help, ask at a main Post  
Ofce for the booklet “How to Improve  
Television and Radio Reception”.  
other equipment, which connects to the  
aerial socket such asTV games, or a video  
camera it is recommended that these be  
connected via a combiner unit to avoid  
repeated connection and disconnection  
of the aerial plug.  
Mains connection  
Before connecting theTV to the mains, check  
that the mains supply voltage corresponds to  
the voltage printed on the type plate on the  
rear panel of theTV. If the mains voltage is  
different, consult your dealer.  
Fitting the stand (if provided)  
Use only the stand provided with the set,  
making sure that the xings are properly  
tightened.A diagram showing how to  
assemble the stand is packed with the stand.  
Never use a make-shift stand, or legs xed  
with woodscrews.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2007 Koninklijke Philips N.V.  
All rights reserved  
Document order number: 3139 125 38523  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Digital Camera C2946M User Manual
Pentax Digital Camera Optio E50 User Manual
Pentax Network Card IC 360 User Manual
Philips Automobile Accessories AS111 User Manual
Philips Computer Drive PCA532K User Manual
Philips Paint Sprayer 32PT81S1 User Manual
Pioneer Speaker System XW SMA1 User Manual
Planet Technology DVR DVR 471 User Manual
Polaroid Digital Camera D 360L User Manual
Princeton Home Security System 4411 0139 User Manual