DVD VIDEO PLAYER
DVP3136
User Manual
6
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
dvp3136_94_eng 4.indd
1
2007-06-05 9:58:10 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English------------------------------------------6
3
dvp3136_94_eng 4.indd
3
2007-06-05 9:58:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Environmental Information
Laser Safety
All unnecessary packaging has been
omitted. The packaging has been made
easy to separate into two materials;
cardboard (box) and polyethylene (bags,
protective foam sheet).
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
Pictures shown maybe different
between countries.
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
CAUTION:
WARNING LOCATION: ON THE
BACKPLATE OF THE SET
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Manufactured under license from
Dolby Laboratories, Dolby
and the double-D symbol are
trademarks of Dolby Laboratories.
Windows Media and the Windows logo
are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners.
For Customer Use:
LASER
Read carefully the information located at
the bottom or rear of your DVD Video
player and enter below the Serial No.
Retain this information for future
reference.
Type
Semiconductor laser
InGaAlP (DVD)
AIGaAs (CD)
658 nm (DVD)
790 nm (CD)
Wave length
Output Power
7.0 mW (DVD)
10.0 mW (VCD/CD)
Beam divergence 60 degrees
Model No. DVP 3136
Serial No. ___________________
4
dvp3136_94_eng 4.indd
4
2007-06-05 9:58:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code
5
dvp3136_94_eng 4.indd
5
2007-06-05 9:58:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Care and Safety Information
Setup.............................................................................................................................................................8
Cleaning discs.............................................................................................................................................8
General Information
Accessories supplied ................................................................................................................................9
Region codes...............................................................................................................................................9
Connections
Connecting to television.......................................................................................... 10-11
Using Composite Video jacks (CVBS).............................................................................................. 10
Using Component Video jacks (YPbPr)........................................................................................... 10
Using an accessory RF modulator ......................................................................................................11
Connecting the power cord...........................................................................................12
Optional connections
Connecting to a stereo system.....................................................................................13
Stereo system has right/ left Audio In jacks................................................................................... 13
Connecting to a digital AV receiver.............................................................................13
Receiver has a PCM, Dolby Digital or MPEG decoder................................................................ 13
Connecting to an Multi- Channel Receiver.................................................................14
Receiver has a Dolby Digital decoder.........................................................................................................14
Connecting to Speaker ..................................................................................................14
Receiver as +RCH- and +LCH-Audio In Jacks............................................................................... 14
Product Overview
Front and Rear Panels................................................................................................... 15
Remote Control..............................................................................................................16
Getting Started
Step 1: Inserting Batteries.............................................................................................17
Using the remote control to operate the system..........................................................................17
Step 2: Finding your viewing channel...........................................................................17
Step 3: Setting up Progressive Scan feature.............................................................. 18
Step 4: Selecting the matching color system .............................................................19
Step 5: Setting the language ........................................................................................ 20
On-screen display (OSD) language....................................................................................................20
Audio, Subtitle and DVD menu languages.......................................................................................20
Playback from Disc
Playable discs.................................................................................................................. 21
Supported formats................................................................................................................................ 21
Playback Features
Starting disc playback ................................................................................................... 22
Basic playback controls................................................................................................. 22
Pausing playback......................................................................................................................................22
Selecting title/chapter/track................................................................................................................22
Stopping playback...................................................................................................................................22
Operations for video playback..................................................................................... 23
Using the Disc Menu .............................................................................................................................23
Zooming in...............................................................................................................................................23
Resuming playback from the last stopped point............................................................................23
Slow Motion.............................................................................................................................................23
Forward / Reverse Searching..............................................................................................................23
Angle..........................................................................................................................................................23
6
dvp3136_94_eng 4.indd
6
2007-06-05 9:58:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Selecting various repeat functions.............................................................................. 24
Repeat play mode................................................................................................................................... 24
Repeating a section within a title/chapter/track............................................................................ 24
Viewing the disc playback information....................................................................... 25
Title/Chapter/Track selection ............................................................................................................25
Time Search.............................................................................................................................................25
Special DVD Features................................................................................................... 26
Playing a Title...........................................................................................................................................26
Changing the Audio Language.............................................................................................................26
Subtitles.....................................................................................................................................................26
Special VCD and SVCD Feature.................................................................................. 26
Playback Control (PBC)........................................................................................................................26
Playing MP3/WMA/JPEG/Kodak/Fuji Picture CD................................................27-28
General Operation................................................................................................................................ 27
Playback selection .................................................................................................................................. 27
Zoom picture (JPEG) ............................................................................................................................28
Playback with multi-angles (JPEG).....................................................................................................28
DVD Menu Options
Using the Language setup menu ................................................................................. 29
OSD Language.........................................................................................................................................29
Subtitle/Audio/DVD Menu...................................................................................................................29
Using the Video setup menu...................................................................................30-32
Setting the Aspect Ratio ......................................................................................................................30
View Mode ............................................................................................................................................... 31
TV System ................................................................................................................................................ 31
Video Out................................................................................................................................................. 31
Smart Picture........................................................................................................................................... 32
Using the Audio setup menu...................................................................................33-35
Front / Center / Surround Speakers................................................................................................. 33
Subwoofer................................................................................................................................................34
Digital Output.........................................................................................................................................34
Night Mode..............................................................................................................................................35
Down Sampling.......................................................................................................................................35
Audio Output..........................................................................................................................................35
Using the Rating setup menu..................................................................................36-37
Rating level settings .........................................................................................................................36-37
Changing the Password......................................................................................................................... 37
Using the Misc (Miscellaneous) setup menu.........................................................38-39
Restoring to the original settings.......................................................................................................38
Volume Control......................................................................................................................................39
Speaker Delay..........................................................................................................................................39
Others
Software upgrade .......................................................................................................... 40
Troubleshooting........................................................................................................41-42
Specifications ................................................................................................................. 43
Glossary........................................................................................................................... 44
7
dvp3136_94_eng 4.indd
7
2007-06-05 9:58:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Safety Information
DANGER!
Cleaning discs
High voltage! Do not open the
device. You run the risk of getting
an electric shock.
Some problems occur because the disc
inside the player is dirty (frozen picture,
sound disruptions, picture distortions).
To avoid these problems, discs should be
cleaned on a regular basis.
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualified
personnel.
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
Setup
Finding a suitable location
– Place the set on a flat, hard and stable
surface. Do not place the set on a
carpet.
– Do not put any equipment or heavy
objects on top of the set.
– Do not position the set on top of
other equipment that might heat it up
(such as receiver or amplifier).
– Do not put anything under the set
(such as CDs, magazines).
– Install this unit near the AC outlet and
where the AC power plug can be
reached easily.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for analog
discs. Since the optical unit (laser) of the
DVD player operates at a higher power
than regular DVD or CD players,
cleaning CDs intended for DVD or CD
players may damage the optical unit
(laser). Therefore, refrain from using a
cleaning CD.
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent
internal heat build up. Allow at least
10 cm (4.0”) clearance from the rear
and the top of the set and 5cm (2.0”)
from the left and right to prevent
overheating.
5cm (2.0")
10cm (4.0")
10cm (4.0")
5cm (2.0")
Avoid high temperatures, moisture,
water and dust
– Apparatus shall not be exposed to
dripping or splashing.
– Do not place any sources of danger
on the apparatus (such as liquid filled
objects, lighted candles).
8
dvp3136_94_eng 4.indd
8
2007-06-05 9:58:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Accessories supplied
Region codes
This DVD player is designed to support
the Region Management System. Check
the regional code number on the disc
package. If the number does not match
the player’s region number (see table
below), the player may be unable to
playback the disc.
Composite
video cable
(yellow) and
Audio cables
(white, red)
Tips:
– It may not be possible to play CD-R/RW
or DVD R/RW in all cases due to the type
of disc or condition of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improper formatted disc will not played on
this DVD player.
DISC
MENU
DISPLAY
Discs that can
be played
Region
Remote
control and
two AAA
batteries
RETURN
TITLE
SETUP
NEXT
PREV
PLAY/PAUSE
U.S.A. and
Canada regions
STOP
MUTE
ALL
1
2
3
4
5
6
U.K and
Europe regions
SUBTITLE
ZOOM
AUDIO
ALL
ALL
ALL
ALL
ALL
Asia Pacific,
Taiwan, Korea
Australia,
New Zealand,
Latin America
Russia and
India regions
China, Calcos Islands,
Walls and Futuna
Islands
9
dvp3136_94_eng 4.indd
9
2007-06-05 9:58:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to television
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
S-VIDEO
IN
AUDIO
IN
V
U
Y
(Pr/Cr)
AUDIO
IN
(Pb/Cb)
VIDEO IN
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
COMPONENT
VIDEO IN
V
U
(Pr/Cr)
AUDIO
OUT
S-VIDEO
IN
V
U
(Pr/Cr)
AUDIO
OUT
(Pb/Cb)
V
I
D
E
O
I
N
(Pb/Cb)
Y
V
I
D
E
O
I
N
Y
1
2
2
1
DIGITAL
OUT
DIGITAL
OUT
CENTER
RL
FRONT L
FRONT R
CENTER
R
L
FRONT
FRONT
L
TV OUT
SUBWOOFER REAR
R
R
SUBWOOFER REAR R
AUDIO OUT
COAXIAL
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
IMPORTANT!
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using ComponentVideo jacks
(YPbPr)
Using CompositeVideo jacks
(CVBS)
A Use the component video cables (red/
blue/green) to connect the DVD player’s
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
A Use the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the television (cable
supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect FRONT
(L/R) AUDIO OUT jacks of the DVD
player to the corresponding AUDIO IN
jacks on the television (cable supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect FRONT
(L/R) AUDIO OUT jacks of the DVD
player to the corresponding AUDIO IN
jacks on the television (cable supplied).
C Proceed to page 18 for detailed
progressive scan setup.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
10
dvp3136_94_eng 4.indd 10
2007-06-05 9:58:20 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (continued)
ANT IN
RF coaxial cable to TV
2
Back of RF Modulator
(example only)
ANT IN
TO TV
AUDIO IN
VIDEO
IN
R
L
CH3 CH4
ANT IN
3
4
1
DIGITAL
OUT
R L
R R
FRONT
TV OUT
FRONT R
COAXIAL
O OUT
COMPONENT VIDEO OUT
IMPORTANT!
C To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect FRONT (L/R)
AUDIO OUT jacks of the DVD player to
the corresponding AUDIO IN jacks on
the RF modulator (cable supplied).
– If your television only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
D Connect the Antenna or Cable TV
service signal to the ANTENNA IN or
RF IN jack on the RF modulator. (It may
have been connected to your TV
Using an accessory RF modulator
previously. Disconnect it from the TV).
A Use the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack on
the RF modulator.
B Use the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the television.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
11
dvp3136_94_eng 4.indd 11
2007-06-05 9:58:20 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (continued)
Connecting the power cord
DIGITAL
REAR L
FRONT L
FRONT R
TV OUT
CENTER
OUT
REAR R
AUDIO OUT
SUBWOOFER
COAXIAL
COMPONE
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD player
front panel.
“– – –” may appear on the display
panel.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
dvp3136_94_eng 4.indd 12
2007-06-05 9:58:20 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional connections
Connecting to a stereo
system
Connecting to a digital AV
receiver
STEREO
AV Receiver
AUDIO
IN
AUDIO
IN
DIGITAL
DIGITAL
DIGITAL
OUT
DIGITAL
CENTER
RE
FRONT
FRONT
L
TV OUT
CENTER
REAR L
FR
FRONT R
TV OUT
OUT
SUBWOOFER REAR
R
R
COAXIAL
SUBWOOFER REAR R
AUDIO OUT
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Receiver has a PCM, Dolby Digital
or MPEG decoder
Stereo system has right/ left Audio
In jacks
A Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
A Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your receiver (cable not
supplied).
B Use the audio cables (white/red) to
connect FRONT (L/R) AUDIO OUT
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the
stereo system (cable supplied).
C Set the DVD player’s digital output to
PCM-Only or ALL depending on the
capabilities of your receiver (see page 34
{Digital Output}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
13
dvp3136_94_eng 4.indd 13
2007-06-05 9:58:20 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional connections (continued)
Connecting to an Multi-
Channel Receiver
Connecting to Speaker
MULTICHANNEL AUDIO IN
AV Receiver
FRONT
REAR
SUBW.
R
L
R
L
CENTE
FRON
REA
+
RCH
-
-
LCH
+
SPEAKER
Receiver has a Dolby Digital
decoder
Receiver as +RCH- and +LCH-
Audio In Jacks
A Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
A Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input jacks on your
receiver (cable not supplied).
B Connect the “+RCH-” and “-LCH+” to
the corresponding inputs on your
speaker. (speakers not supplied).
Tip:
C Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your receiver
(cable not supplied).
– 6 Ω and 8 Ω is advised to be the input
impedance of the connecting speakers.
– To have better audio effect from the
speakers, set ‘Audio output’ to ‘Stereo’.
– Connecting the speaker wire with improper
polarity might result in distorted sound/low
quality sound.
– Shorting the speaker terminals might result
in the damage of the main unit and will
make the warranty void.
– Placing the speakers too close to your TV
might distort the image on the TV.
14
dvp3136_94_eng 4.indd 14
2007-06-05 9:58:21 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Front and Rear Panels
STANDBY ON 2
–
Turns on the player or switches
to standby mode
STOP
– Stops playback
ꢀ
Disc Tray
OPEN/CLOSE ç
PLAY/PAUSE u
–
Opens or closes the disc tray.
– Starts or pauses playback.
Display panel
IR Sensor
– Point the remote control towards
this sensor
–
Shows information about the
current status of the DVD player.
Mains ~ (AC Power Cord)
Connect to a standard AC outlet
+RCH-/-LCH+ (Speaker)
– Connect to the input jacks of
a pair of speaker
–
Multi-channel Audio Out
–
Center speaker, subwoofer, front
and rear speakers multi-channel
connection
YPbPr (Component Video Out)
– Connect to YPbPr input of a television
COAXIAL (Digital audio out)
TV OUT (CVBS)
– Connect to CVBS Video input of a
television
–
Connect to coaxial AUDIO input
of a digital audio equipment
+
RCH
-
-
LCH
+
SPEAKER
15
dvp3136_94_eng 4.indd 15
2007-06-05 9:58:21 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview (continued)
Remote Control
2
–
DISC MENU
– Enters or exits the disc
contents menu
To switch the DVD player
to standby mode or ON
– Switches on or off the
playback control mode (for
VCD 2.0 only)
DISPLAY
Displays information on TV
screen during playback
–
OK
– Confirms an entry or
selection
W X
–
Cursor buttons for moving
to the left or right, do a fast
forward/reverse search.
DISC
RETURN/TITLE
– To go back to previous
menu/ show title menu
DISPLAY
MENU
ST
–
Cursor buttons for moving
up/down, do a slow
forward/backward
PREV í
RETURN
– Skips to the previous title/
TITLE
SETUP
NEXT
SETUP
Enters or exits the system
setup menu
PREV
chapter/track
PLAY/PAUSE
–
STOP
MUTE
STOP
– Stops playback
ꢀ
NEXT ë
Skips to the next title/
chapter/track
u PLAY/PAUSE
– Starts or pauses playback
–
SUBTITLE
ZOOM
AUDIO
MUTE
Disables or enables sound
output
SUBTITLE
– To access subtitle language
system menu
–
Alphanumeric keypad
ZOOM
– Enlarge a picture on the TV
screen
–
Selects numbered items in
a menu
VOLUME
– Displays the speaker’s
volume level
AUDIO
Selects an audio language
–
(DVD/VCD) or an audio
channel
REPEAT/ REPEAT A-B
– Selects various repeat mode
– Repeats playback a specific
section on a disc
16
dvp3136_94_eng 4.indd 16
2007-06-05 9:58:21 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Inserting Batteries
Step 2: Finding your viewing
channel
A Press STANDBY-ON 2 on the DVD
player to turn it on.
B Turn on the TV and set it to the correct
video-in channel. You should see the blue
DVD background screen.
ꢁUsually these channel are between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO.
See your TV’s manual for more
details.
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+ –) inside the
compartment.
ꢁOr, you may go to channel 1 on your
TV, then press the Channel down
button repeatedly until you see the
Video In channel.
ꢁOr, the TV remote control may have
a button or turn that chooses
different video modes.
C Close the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
ꢁOr, set the TV to channel 3 or 4 if
you are using an RF modulator.
– Batteries contain chemical
substances, so they should be
disposed of properly.
C If you are using external equipment, (such
as audio system or receiver), turn it on
and select the appropriate input source
for the DVD player output. Refer to the
equipment user’s manual for detail.
Using the remote control to
operate the system
DISC
MENU
DISPLAY
RETURN
TITLE
SETUP
NEXT
PREV
PLAY/PAUSE
STOP
MUTE
A Aim the remote control directly at the
remote sensor (IR) on the front panel.
B Do not put any objects between the
remote control and the DVD player
while operating the DVD player.
17
dvp3136_94_eng 4.indd 17
2007-06-05 9:58:22 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started (continued)
G Select { P-Scan }, then press OK to
confirm.
Step 3: Setting up
Progressive Scan feature
ꢁThe menu will appear on the TV.
Activating Progressive Scan
1.Ensure your TV system supports
Progressive Mode
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
NO
Yes
H Press W to highlight { Yes } and press
OK to confirm.
Before you start...
I Turn on your TV progressive scan mode
(refer to your TV user manual).
– Ensure that you have connected this
DVD player to a progressive scan TV
using the Y Pb Pr connection (see page
10).
– Ensure that you have completed the
basic installation and set-up.
ꢁThe menu will appear on the TV.
Confirm again to use new setting
Revert to original setting in 14 seconds
Yes
NO
A Turn on your TV and set to interlace
J Press W to highlight { Yes } and press
OK to confirm.
mode (refer to your TV user manual).
B Press STANDBY ON 2 on the
remote control to turn on the DVD
player.
ꢁThe setup is now completed and you
can start enjoy the high quality
picture.
C Select the correct video-in channel.
To deactivate Progressive Scan
manually:
ꢁThe DVD background menu appears.
D Press SETUP.
ꢂWait for 15 seconds for the auto
recovery.
E Press ST to select { Video }, then press
OR
X.
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
Language
Video
Aspect Ratio
: 4:3
View Mode
:Auto Fit
B Press numeric keypad ‘1’ on the
remote control for few seconds.
TV System
:PAL
Video Out
Interlaced
ꢁThe DVD background screen appears.
Smart Picture
P-Scan
Audio
Rating
Misc
Tip:
– There are some progressive scan TVs and
High-Definition TVs that are not fully
compatible with this unit, resulting in the
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the DVD player and your TV.
F Press ST repeatedly to select { Video
Out }, then press X.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
18
dvp3136_94_eng 4.indd 18
2007-06-05 9:58:22 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started (continued)
E Select a setting and press OK.
ꢁFollow the instructions show on the
TV to confirm the selection (if any).
Step 4: Selecting the
matching color system
Changing NTSC to PAL
1.Ensure your TV system supports
PAL Standard
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover
The color system of the DVD player, disc
and TV should match in order for the
disc to play. Before changing the TV
system, determine the color system of
your TV.
Yes
NO
Confirm again to use new setting
Revert to original setting in 14 seconds
Language
Video
Aspect Ratio
: 4:3
View Mode
:Auto Fit
Yes
NO
TV System
NTSC
Video Out
PAL
Smart Picture
Multi
Audio
F Press W to highlight { Yes } and press
OK to confirm.
Rating
Misc
To reset to default TV color system:
ꢂWait for 15 seconds for the auto
recovery.
A Press SETUP.
OR
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
B Press ST to select { Video }, then press
X.
B Press numeric keypad ‘3’ on the
remote control for few seconds.
C Press ST repeatedly to select
{ TV System }, then press X.
ꢁThe DVD background menu appears.
D Use ST to select one of the options
below:
Tips:
– Before changing the current TV colour
setting, ensure that your TV supports the
‘selected TV System’.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
ꢂSelect PAL for Asia Pacific region.
{ PAL }
ꢂSelect NTSC for Taiwan region.
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
19
dvp3136_94_eng 4.indd 19
2007-06-05 9:58:22 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started (continued)
Audio, Subtitle and DVD menu
languages
Step 5: Setting the language
You can choose your preferred language
or sound track from audio, subtitles and
DVD menu languages. If the selected
language is not available on the disc, the
disc’s default language will be used
instead.
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
On-screen display (OSD) language
Select this to change the language of this
DVD player screen display menu.
The menu language (on-screen display)
for the system will remain as you set it.
Language
Video
OSD language : English
Subtitle
: Auto
English
Hindi
Audio
DVD menu
Audio
Rating
Language
Video
OSD language
Subtitle
English
Hindi
Misc
Audio
DVD menu
: English
Audio
A Press SETUP.
Rating
B Press ST to select { Language }, then
Misc
press X.
C Press ST to highlight one of the options
below, then press X.
A Press SETUP.
{ Subtitle }
Select this to change the subtitle language.
B Press ST to select { Language }, then
press X.
{ Audio }
Select this to change disc sound track
language.
C Press ST to select { OSD Language },
then press X.
D Use ST to select a language and press
{ DVD menu }
Select this to change the language of the
disc menu.
OK to confirm.
D Use ST to select a language and press
OK to confirm.
E Repeat steps C - D for other language
settings.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
20
dvp3136_94_eng 4.indd 20
2007-06-05 9:58:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback from Disc
IMPORTANT!
Super Video CD
– If the INVALID KEY appears on
the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
MP3-Disc
– DVD discs and players are designed
with regional restrictions. Before
playing a disc, make sure the disc is
for the same zone as your player.
Supported formats
MP3/WMA tracks
– The file extensions has be to be
‘.mp3’, ‘.wma’
– JPEG/ISO format
Playable discs
– Maximum 15 characters display.
– Supported sampling frequencies and
corresponding bit-rates;
Using this DVD player, you can playback
on the following discs:
32kHz
44.1kHz, 48kHz
64 – 320 kbps
80 – 320 kbps
DVD Video
(Digital Versatile Disc)
JPEG pictures
– The file extensions has be to be ‘.JPG’
and not ‘.JPEG.’
DVD RW (DVD Rewritable)
Audio/Video format or
MP3/WMA/JPEG files.
– JPEG/ISO format
DVD R (DVD Recordable)
Audio/Video format or
MP3/WMA/JPEG files.
– It can only display DCF-standard still
pictures or JPEG pictures such as
TIFF.
CD-R (CD-Recordable)
Audio/Video format or
MP3/WMA/JPEG files.
Tips:
– Maximum 100 sessions for CD and 10
multi border for DVD are supported.
– For DVD-R and DVD-RW multi border,
only finalized disc are supported.
– For DVD+R and DVD+RW multi border
both finalized and unfinalized disc are NOT
supported.
CD-RW (CD-Rewritable)
Audio/Video format or
MP3/WMA/JPEG files.
Audio CD
(Compact DiscDigital Audio)
Video CD
(Formats 1.0, 1.1, 2.0)
TIPS: Some discs cannot be played on this DVD player due to the configuration and characteristics of
the disc, or due to the condition of recording and authoring software that was used.
21
dvp3136_94_eng 4.indd 21
2007-06-05 9:58:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features
Starting disc playback
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
A Turn on the TV to the correct program
number for the DVD player (e.g. ‘EXT’,
‘0’, ‘AV’).
B Press STANDBY-ON 2 to turn on
Pausing playback
the DVD player.
A During playback, press PLAY/PAUSE
u to pause playback and display a still
picture.
C Press OPEN/CLOSE ç on the front of
the DVD player.
ꢁSound will be muted.
ꢂYou can also hold down the STOP
ꢀ
button on the remote control to open
and close the disc tray.
B To resume normal playback, press
PLAY/PAUSE u again.
D Place a disc into the disc tray with the
label facing up, then press OPEN/
CLOSE ç.
Selecting title/chapter/track
ꢂPress PREV í / NEXT ë to go to
ꢁFor double-sided discs, load the side
which you want to play facing up.
the previous or next title/chapter/track.
ꢂPress DISPLAY to display the disc
information text line for title/chapter/
track (example - 00/08).
E Playback may start automatically.
If not, press PLAY/PAUSE u.
ꢂIf a disc menu appears on the TV, see
ꢂUse alphanumeric keypad (0-9) to
enter valid title/chapter/track number,
then press OK.
page 23 'Using the Disc Menu'.
ꢂIf the child lock was activated for the
inserted disc, you have to enter your
four-digit password (see page 36).
ꢁThe playback skips to the selected
title/chapter/track.
ꢂFor more playback features, see pages
Stopping playback
21~27.
ꢂPress STOP
.
ꢀ
Tips:
– Do not overturn the DVD player while disc
loading, playing or ejecting.
– Do not close the disc tray manually even if
the power switched off.
Tips:
– Screen saver will start automatically if the
disc playback is stopped for about 5 minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for about 15 minutes after the disc
has stopped playing.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
22
dvp3136_94_eng 4.indd 22
2007-06-05 9:58:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features (continued)
ꢂDuring the message appears on the TV
screen, press PREV to start playback
from the beginning.
Operations for video
playback
ꢁPlayback restarts from the first title
(DVD) or the beginning of the title/
track (VCD/CDDA/SVCD).
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load
in the disc.
ꢂTo remove the message from the TV
screen, press DISPLAY.
To select a playback feature or item
ꢂUse STW X keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
Slow Motion
You can slow forward or slow reverse a
disc during playback and select a different
speed.
For DVD,VCD,SVCD
To access or remove the menu
A Press ST during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(forward or backward).
ꢂPress DISC MENU on the remote.
Zooming in
ꢁSound will be muted.
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
B To return to normal speed, press
PLAY/PAUSE u.
A During playback, press ZOOM
repeatedly to display the picture with
different scales.
Forward / Reverse Searching
You can fast forward or fast reverse a
disc during playback and select a desired
search speed.
ꢁUse STW X keys to pan through
the enlarged picture.
ꢁPlayback will continue.
For DVD,VCD,SVCD,CD
A Press W X directly or pressíë for a
few seconds during playback to select the
required speed: 2X, 4X, 8X, 16X or 32X
(backward or forward).
B Press ZOOM repeatedly to return to
the original size.
Resuming playback from the last
stopped point
ꢁSound will be muted (DVD/VCD) or
intermittent (CD).
Resume playback of the last 5 discs is
possible, even if the disc was ejected
(open), standby or power off. Auto
resume is active for DVD,VCD,SVCD,CD
types of discs.
B To return to normal speed, press
PLAY/PAUSE u.
Tip:
– For CD, fast forward or fast reverse is
available only when pressing í ë for few
seconds or more.
ꢂLoad one of the last 5 discs.
ꢁ‘Play from start, press [PREV]’ appears
during playback for first 10 seconds.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
23
dvp3136_94_eng 4.indd 23
2007-06-05 9:58:24 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features (continued)
Repeating a section within a title/
chapter/track
Selecting various repeat
functions
You can repeat the playback of a specific
segment within a title/chapter track. To
do this, you must mark the start and end
of the segment you want.
Repeat play mode
The repeat play options vary depending
on the disc type.
A While playing a disc, press REPEAT/
REPEAT A-B.
A While playing a disc, press REPEAT/
REPEAT A-B.
ꢁThe menu appears on the TV screen.
Rep off
A - B off
1/1
ꢁThe menu appears on the TV screen.
Rep off
A - B off
1/1
B Press W X to highlight {A-B Off}, then
press OK at your chosen starting point.
B Press W X to highlight {Rep Off}, then
press OK repeatedly to select the
following repeat options.
C Press OK again at your chosen end point.
ꢁThe section A and B can be set only
within the same chapter/track.
ꢁThe section will now repeat
continuously.
For DVD
– Repeat Chapter (currently playing
chapter)
– Repeat Title (currently playing title)
– Off (cancel)
D To exit the sequence, press OK.
Angle
For Video CD, Audio CD
– Repeat Single (currently playing track)
– Repeat All (entire disc)
– Off (cancel)
A When { Angle } information appears on
the TV screen, press WX to highlight
{ Angle }.
For MP3/WMA
B Press OK repeatedly to switch between
different angle.
– Repeat Single (currently playing file)
– Repeat folder (current folder)
– Off (cancel)
ꢁPlayback will go to the selected angle.
For JPEG
– Repeat Single (currently playing file)
– Repeat folder (current folder)
– Off (cancel)
Tip:
– For VCD, repeat playback is not possible if
the PBC mode is switched on.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
24
dvp3136_94_eng 4.indd 24
2007-06-05 9:58:25 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features (continued)
Time Search
Viewing the disc playback
information
A When {Time} information appears on the
TV screen, press OK to access.
You can view the disc information (such
as current title/chapter/track number,
total elapsed time or playing time on the
disc) without interrupting the disc
playback.
B Use the alphanumeric keypad 0-9 to
input the valid time (such as 0:34:27).
C Press OK to confirm.
ꢁThe playback skips to the chosen
time.
A During playback, press DISPLAY
repeatedly on the remote control.
ꢁThe available disc information appears
on the TV screen with the following
sequence.
Title/Chapter
Title
1/1
Chapter
6/16
(DVD)
Time
Time
00:03:36/01:22:34
(DVD)
Track
Track
3/21
(VCD)
(VCD)
Time
Time
00:00:56/00:03:34
Title/Chapter/Track selection
A Press W X to select {Title} / {Chapter}
or {Track}.
B Use the alphanumeric keypad 0-9 to
input a valid number.
C Press OK to confirm.
ꢁThe playback skips to the chosen title/
chapter/track.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
25
dvp3136_94_eng 4.indd 25
2007-06-05 9:58:25 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features (continued)
Special DVD Features
SpecialVCD and SVCD
Feature
Playing aTitle
Playback Control (PBC)
A Press DISC MENU.
ꢁThe disc title menu appears on the
TV.
For VCD with Playback Control
(PBC) feature (version 2.0 only)
B Use STW X keys or alphanumeric
ꢂPress DISC MENU to toggle between
‘PBC ON’ and ‘PBC OFF’.
keypad 0-9 to select a play option.
ꢁIf you select ‘PBC ON’, the disc menu
(if available) will appear on the TV.
ꢁUse PREVí / NEXTë to turn to
previous/next page or use the
C Press OK key to confirm.
Changing the Audio Language
For DVD
alphanumeric keypad 0-9 to select a
play option.
ꢂPress AUDIO repeatedly to select
different audio languages.
ꢂDuring playback,
ꢁpressing PREV í after the first 5
seconds, playback will start from the
beginning of the current track,
ꢁpressing PREV í within the first 5
seconds, playback will go to the
previous track.
Changing the Audio Channel
For VCD
ꢂPress AUDIO to select the available
audio channels provided by the disc
(LEFT, RIGHT, MIX, STEREO).
ꢂDuring playback, pressing RETURN/
TITLE will return to the menu screen (if
PBC is on).
Subtitles
ꢂPress SUBTITLE repeatedly to select
different subtitle languages.
If you want to skip the index menu
and playback directly from the
beginning,
ꢂPress DISC MENU key on the remote
control to turn to PBC off.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
26
dvp3136_94_eng 4.indd 26
2007-06-05 9:58:25 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features (continued)
Playback selection
Playing MP3/WMA/JPEG/
Kodak/Fuji Picture CD
During playback, you can;
ꢂPress PREV í / NEXT ë to select
the previous/next track/file in the current
folder.
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel. (See page
16 ‘Finding your viewing channel’).
ꢂPress ST W X on the remote to
rotate/flip the picture files.
ꢂPress PLAY/PAUSE u repeatedly to
General Operation
pause/resume playback.
A Load a disc.
ꢁThe disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
ꢁThe data disc menu and ID3 (MP3) /
Meta data (WMA) information
(including at least title, singer and
album) appears on the TV screen.
For MP3/WMA,
ꢂDuring playback,
ꢁpressing PREV í after the first 5
seconds, playback will start from the
beginning of the current track,
ꢁpressing PREV í within the first 5
seconds, playback will go to the
previous track.
00:00:46
02/20
/MP3/07.....MP3
Go Up
07.----
09.---
Filter
: Off
ꢂDuring playback, press and hold
PREV í / NEXT ë for about few
seconds to access fast forward or fast
reverse with the required speed: 2X, 4X,
8X, 16X or 32X.
Repeat
2002.---
TAKE ME TO YOUR
----
---
Music Playing
----
Title:----- Singer
:-----
Album Year:
Comment:
Tip:
– For MP3/WMA, fast forward or fast
reverse is available only when pressing í
ë for few seconds or more.
B Press ST to select the folder and press
OK to open the folder.
C Press ST to select a track/file.
D Press OK to confirm.
Tips:
– If the playing file is not selected, the ID3/
Meta information will disappear.
– If a jpeg file is selected, a preview will
appear.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
27
dvp3136_94_eng 4.indd 27
2007-06-05 9:58:25 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features (continued)
Zoom picture (JPEG)
ꢂDuring playback, press ZOOM
repeatedly to display the picture with
different scales.
ꢂUse STW X to pan through the
zoomed picture.
Playback with multi-angles (JPEG)
ꢂDuring playback, press STW X to
rotate the picture on the TV screen.
ST: flip the picture vertically by 180º
W: rotate the picture anti-clockwise by
90º
X: rotate the picture clockwise by 90º
Tip:
– It may not be possible to play certain
MP3/JPEG disc due to the configuration and
characteristics of the disc or condition of the
recording.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
28
dvp3136_94_eng 4.indd 28
2007-06-05 9:58:25 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options
This DVD Player setup is carried out via
the TV, enabling you to customize the
DVD player to suit your particular
requirement.
OSD Language
This menu contains various language
options for the language displayed on the
screen. For details, see page 20.
Subtitle/Audio/DVD Menu
Using the Language setup
menu
These menus contains various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 20.
A Press SETUP on the remote control.
ꢁThe system setup menu appears.
Language
Video
OSD Language
Subtitle
:English
:Auto
Audio
:
English
DVD Menu
English
:
Audio
Rating
Misc
B Press ST to select { Language }, then
press X.
C Press ST to select an item, then press
X to access.
Example: { OSD Language }
ꢁThe options for the selected item
appears.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use ST to select a setting and press
OK to confirm.
Example: { English }
ꢁThe setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
29
dvp3136_94_eng 4.indd 29
2007-06-05 9:58:26 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
Setting the Aspect Ratio
Using theVideo setup menu
The picture shape can be adjusted to fit
your TV and the format must be available
on the playback disc. Otherwise, the TV
display will not affect the picture during
playback.
A Press SETUP on the remote control.
ꢁThe system setup menu appears.
A In ‘Video’, press ST to select { Aspect
Language
Video
Aspect Ratio
View Mode
TV System
Video Out
: 4:3
:Auto Fit
:PAL
Ratio }, then press X.
{ 4:3 }
:Interlaced
:Standard
Smart Picture
Select this if you have a
normal TV. A ‘wide-
screen’ display with
black bars on the top
and bottom will be displayed on the TV
screen.
Audio
Rating
Misc
{ 16:9 }
B Press ST to select { Video }, then
Select this for
wide-screen TV
(frame ratio
16:9).
press X.
C Press ST to select an item, then press
X to access.
Example: { TV System }
ꢁThe options for the selected item
appears.
B Use ST to select a setting and press
OK to confirm.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use ST to select a setting and press
OK to confirm.
Example: { PAL }
ꢁThe setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
30
dvp3136_94_eng 4.indd 30
2007-06-05 9:58:26 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
View Mode
TV System
Use view mode to scale an image that fits
to the TV screens’ width and height.
This menu contains the options for
selecting the color system that matches
the connected TV. For details, see page
19.
A In ‘Video’, press ST to select { View
Mode }, then press X.
{ Fill }
Video Out
Select this to scale the image up or down
in horizontal and vertical directions
respectively to fill the screen height and
width.
This setting allows you to toggle the
output of the video signal between
Interlaced and P-Scan (Progressive Scan).
A In ‘Video’, press ST to select { Video
{ Original }
Select this to fit the original screen size
(only for MPEG).
Out }, then press X.
{ Interlaced }
Select this for Interlaced (YPbPr)
connection.
{ Height Fit }
Select this to scale the image up or down
in vertical direction to fit the screen
height.
{ P-Scan }
Select this when you want to make
progressive scan (YPbPr) connection on
your DVD player to a progressive scan
TV.
{ Width Fit }
Select this to scale the image up or down
in horizontal direction to fit the screen
width.
B Use ST to select a setting and press
OK to confirm.
{ Auto Fit }
Select this to take the minimum value of
horizontal and vertical fit scale ratio (like
letter box).
{ Pan Scan }
Select this to take the maximum value of
horizontal and vertical fit scale ratio.
B Use ST to select a setting and press
OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
31
dvp3136_94_eng 4.indd 31
2007-06-05 9:58:31 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
D Press ST to highlight one of the
Smart Picture
following options.
This DVD player provides four
predefined sets of picture color settings.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Choose zero (0) for
average setting.
A In ‘Video’, press ST to select { Smart
Picture }, then press X.
{ Standard }
Select this for a preset standard picture
setting.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Choose zero (0) to
balance the contrast.
{ Vivid }
Select this to make the picture brighter.
{ Cool }
TINT
Select this to make the picture softer.
Increase the value to darken the picture
or vice versa. Choose zero (0) for
average setting.
{ Personal }
Select this to personalize your picture
color by adjusting the brightness,
contrast, tint and color (saturation).
COLOR
Increase the value to enhance the color
in your picture or vice versa. Choose
zero (0) to balance the color.
B Use ST to select a setting and press
OK to confirm.
C If you select {PERSONAL}, then proceed
to steps D~G.
E Press W X to adjust the setting that best
suits your personal preference.
ꢁThe setup menu appears.
F Repeat steps D~E for adjusting other
color features.
Brightness
Contrast
Tint
0
0
0
0
G Press OK to confirm.
Color
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
32
dvp3136_94_eng 4.indd 32
2007-06-05 9:58:31 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
Front / Center / Surround Speakers
Using the Audio setup menu
You can adjust the volume level setting
for individual speakers.
A Press SETUP on the remote control.
A In ‘Audio’, press ST to select { Front
Speakers }, { Center Speaker } or
{ Surround Speakers }, then press X.
ꢁThe system setup menu appears.
Language
FrontSpeakers
Center Speaker
:Large
{ Large }
:None
When connected speakers (except for
subwoofer) can produce low frequency
signals below 120Hz.
Video
Audio
SurroundSpeakers :None
Subwoofer
:None
DigitalOutput
Night Mode
Down Sampling
:All
:Off
:On
ꢁThe range from 20Hz to 20KHz
Rating
Misc
{ Small }
When connected speakers (except for
subwoofer) can not produce low
frequency signals below 120Hz.
ꢁThe range from 120Hz to 20KHz
B Press ST to select { Audio }, then
press X.
{ None }
No sound output from the speakers.
Only applicable for center and rear
speakers.
C Press ST to select an item, then press
X to access.
Example: { Night Mode }
ꢁThe options for the selected item
appears.
B Use ST to select a setting and press
OK to confirm.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use ST to select a setting and press
OK to confirm.
Example: { On }
ꢁThe setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
33
dvp3136_94_eng 4.indd 33
2007-06-05 9:58:31 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
Digital Output
Subwoofer
Select this if you connect to a
multichannel decoder/receiver.
This option is only available for
subwoofer connection.
A In ‘Audio’, press ST to select { Digital
A In ‘Audio’, press ST to select
Output }, then press X.
{ Subwoofer }, then press X.
{ Off }
{ None }
To deactivate the digital audio output.
For example, if you use the FRONT (L/R)
AUDIO OUT jacks to connect to a TV
or stereo system.
Select this option when no subwoofer is
connected.
{ Present }
Select this option when a subwoofer is
connected.
{ PCM }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
B Use ST to select a setting and press
OK to confirm.
{ All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
B Use ST to select a setting and press
OK to confirm.
Tips:
– If { Digital Output } is set to { All }, all
audio settings except MUTE are invalid.
– If { Digital Output } is set to { All } while
playback MPEG, MP3/WMA files, the player
will output PCM signals.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
34
dvp3136_94_eng 4.indd 34
2007-06-05 9:58:31 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
Night Mode
Audio Output
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
You can set the audio output of the DVD
Player.
A In ‘Audio’, press ST to select { Audio
A In ‘Audio’, press ST to select { Night
Output }, then press X.
Mode }, then press X.
{ Multi channel }
All channels could output audio.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
{ Stereo }
Only left channel and right channel could
output audio.
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
B Use ST to select a setting and press
OK to confirm.
Tip:
B Use ST to select a setting and press
– During Multi Channel mode you may not
be able to hear the complete spectrum of
music/dialogue through the amplifier output
with some Multi Channel discs.
OK to confirm.
Down Sampling
You can enable and disable the digital
signal for better sound output quality.
A In ‘Audio’, press ST to select { Down
Sampling }, then press X.
{ Off }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
{ On }
Playback a disc recorded at the sampling
rate of 48kHz.
B Use ST to select a setting and press
OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
35
dvp3136_94_eng 4.indd 35
2007-06-05 9:58:31 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
Rating level settings
Using the Rating setup menu
Depending on the DVD, you may be
asked to change the parental level while
playing the disc. The rating levels are
from 1 to 8 and are country dependent.
You can prohibit the playing of certain
discs that are not suitable for your
children, or have certain discs played with
alternative scenes.
A Press SETUP on the remote control.
ꢁThe system setup menu appears.
Language
Video
Parentalcontrol
:8.Aduit
Set Password
A In ‘Rating’, press ST to select { Parental
Audio
control }, then press X.
Rating
Misc
B Use the alphanumeric keypad 0-9 to
enter the four-digit password (see page
37 ‘Changing the Password’, then press
X.
{ 1.Kid Safe }
Childsafe; acceptable for viewers of all
ages.
B Press ST to select { Rating }, then
press X.
C Press ST to select an item, then press
X to access.
{ 2. G }
General Audience; recommended as
acceptable for viewers of all ages.
Example: { Parental control }
ꢁThe options for the selected item
appears.
{ 3. PG }
Parental Guidance suggested.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
{ 4. PG – 13 }
Unsuitable for children under age 13.
{ 5. PG – R }
D Use ST to select a setting and press
OK to confirm.
Parental Guidance; recommended that
parents restrict children under 17 from
viewing.
Example: { 8 Adult }
ꢁThe setting is selected and setup is
complete.
{ 6. R }
Restricted; recommended only when
supervised by a parent or adult guardian.
E To exit, press SETUP.
{ 7. NC – 17 }
No Children under age 17; not
recommended viewing for children under
age 17.
{ 8. Adult }
Mature Material; should be viewed only
by adults due to graphic sexual material,
violence or language.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
36
dvp3136_94_eng 4.indd 36
2007-06-05 9:58:31 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
C Use ST to select a rating level and
Changing the Password
press OK to confirm.
ꢁSelect { 8 Adult } to disable parental
You need to enter your four-digit
password to play a prohibited disc or if
prompted for a password.
level and allow all discs to play.
ꢂDVDs that are rated higher than the level
you selected will not play unless you
enter your four-digit password.
A In ‘Rating’, press ST to select
{ Set Password }, then press OK.
ꢁYou will be prompted to enter your
four-digit password.
Tips:
– This feature will not limit viewing if the
disc manufacturer did not code the disc.
– VCD, SVCD, CD have no level indication,
so parental control has no effect on these
type of discs. This also applies to most illegal
DVDs.
Password
B Use the alphanumeric keypad 0-9 to
enter the four-digit password.
ꢁWhen doing this for the first time,
enter the default password ‘0000’.
– Some DVDs are not coded with a rating
though the movie rating may be printed on
the disc cover. The rating level feature does
not prohibit play of such discs.
ꢂIf you forget your old four-digit
password, enter the default password
‘0000’.
C Press OK again to enter the new four-
digit password.
ꢁThe new four-digit password will now
take effect.
New Password
D Press OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
37
dvp3136_94_eng 4.indd 37
2007-06-05 9:58:32 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
Restoring to the original settings
Using the Misc
(Miscellaneous) setup menu
Setting the { Default } function will reset
all options and your personal settings to
the factory defaults, except your
password for rating level.
A Press SETUP on the remote control.
ꢁThe system setup menu appears.
A In ‘Misc’, press ST to select { Use
Default Settings }, then press OK.
ꢁThe menu will appear.
Language
Use Default Settings
Volume
35
15
15
Use Default Settings
Video
Audio
Left
Right
Center
Left Srnd
Right Srnd
Subwoofer
YES
NO
15
15
15
15
R
a
t
in
g
{ Yes }
Misc
Select this to reset to factory default
settings.
Center Spkr Delay : No Delay
{ No }
B Press ST to select { Misc }, then press
Select this to close the menu.
X.
B Use W X to select a setting and press
C Press ST to select an item, then press
OK to access.
OK to confirm.
Example: { Use Default Settings }
ꢁThe options for the selected item
appears.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use ST to select a setting and press
OK to confirm.
Example: { No }
ꢁThe setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
38
dvp3136_94_eng 4.indd 38
2007-06-05 9:58:32 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options (continued)
Volume Control
Speaker Delay
Delay times setting are related to the
listening position or distance for center
and surround speakers.
A In ‘Misc’, press ST to select { Volume
35 }.
B Press W X to adjust the speaker’s
volume that best suits your personal
preference.
A In ‘Misc’, press ST to select { Center
Sprk Delay } or { Surr Sprk Delay },
then press OK.
ꢁThe range from { 0 – 63 }
B Use ST to move the slider to adjust the
delay times of the audio output from the
corresponding speakers.
C Press ST, then press W X to adjust the
volume corresponding speakers from 0-
15.
C Press OK to confirm your selection.
OR
A You can also press VOLUME on the
remote control to display the speaker’s
volume level on the TV screen.
B Press W X to adjust the speaker’s
volume level.
C Press OK or VOLUME to exit.
Tip:
– The display will disappear if no buttons
are press within 5 seconds.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
39
dvp3136_94_eng 4.indd 39
2007-06-05 9:58:32 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Software upgrade
Periodically Philips will issue software
upgrade to enhance your user
experience.
IMPORTANT!
– Power supply must not be
interrupted during upgrade!
To check the current software version of
this DVD player;
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
ꢁThe disc tray will open.
B Press numeric keypad ‘966’ on the
remote control.
ꢁThe software installed in the DVD
player appears on the TV screen.
To download and install the latest
software to the DVD player;
com/support’ to check the availability of
the latest software upgrade.
B Download the software to a CD-R.
C Insert the CD-R to the disc slot.
ꢁThe menu appears.
Firmware Update
Erase and Program
Start
Cancel
Firmware Update
Programming, please wait......
Do not switch the player off!
D Press W X to select { START }, then
press OK to confirm.
ꢁThe latest software will be
downloaded in the DVD player.
40
dvp3136_94_eng 4.indd 40
2007-06-05 9:58:32 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
No power.
–
Press STANDBY-ON button on the front of the DVD
player to turn on the system.
–
–
Make sure the AC outlet has power.
Remote control does not work.
Aim the remote control directly at the sensor on the front
of the DVD player (not towards TV).
–
Remove any obstacles between DVD player and the remote
control.
–
–
Batteries are weak, replace the batteries.
Check the polarities of the batteries are as indicated on the
remote control ( signs).
No picture.
–
Turn on your TV and set to the correct Video In channel
for the DVD player. You may go to Channel 1 on your TV,
then press the channel down button on your TV’s remote
control until you see the TV program.
–
–
Check the video connection between the DVD player and
the TV.
The disc does not match with the TV color system standard
(PAL/NTSC).
The disc is dirty, clean the disc.
Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
The picture is distorted or black &
white during playback.
–
–
–
To deactivate progressive scan function manually;
1) Turn off your TV progressive scan mode (or set to
interlaced mode)
2) Press OPEN/CLOSE to open the DVD player disc tray.
3) Press the alphanumeric keypad ‘1’ for few seconds.
–
–
Check the audio connections, the red and white jacks are
connected correctly.
Set the Digital output correctly, based on the equipment you
connected to the DVD player.
No sound.
–
–
–
Insert the disc with the label facing up.
Wrong region code.
Wrong disc type. Read chapter “Playback from Disc -
Playable discs” for details.
Disc does not play.
–
–
Make sure the disc is not scratched or warped. Clean the
disc or replace a new one.
Check if the disc is defective by trying another disc.
–
–
The aspect ratio is fixed on the DVD disc.
Depending on the TV, it may not be possible to change the
aspect ratio.
The aspect ratio of the screen cannot
be changed.
41
dvp3136_94_eng 4.indd 41
2007-06-05 9:58:33 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Problem
Solution
–
–
Press STOP button twice before selecting the setup/system
menu.
Depending on the disc availability, some menu items cannot
be selected.
Not able to select some items in the
setup/system menu.
–
–
Insert a readable disc with the playback side facing down.
Check the disc type, color system (PAL/NTSC) and region
code.
The DVD player does not start
playback.
–
–
–
Check for any scratches or smudges on the disc.
Press SETUP to turn off the setup menu screen.
You may need to enter the password in order to change the
parental rating level or to unlock the disc for playback.
Moisture may have condensed inside the system. Remove the
disc and leave the system turned on for about an hour.
Disconnect the power cord from the power outlet for a few
minutes. Reconnect the power cord and try to operate again
as usual.
–
–
–
–
Check the disc for fingerprint/scratches and clean with a soft
cloth wiping from center to edge.
Picture freezes momentarily during
playback.
Check that the output of the video signal is turn to
{ Interlaced }.
Unable to select Progressive Scan on/
off.
42
dvp3136_94_eng 4.indd 42
2007-06-05 9:58:33 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
Number of lines 625 525
Playback Multistandard (PAL/NTSC)
CONNECTIONS
YPbPr Output
Video Output
Cinch 3x
Cinch (yellow)
Audio Output (L+R) Cinch (white/red)
VIDEO PERFORMANCE
Digital Output
1 coaxial
Video DAC
YPbPr
Video Output
14 bit
0.7 Vpp ~ 75 ohm
1Vpp ~ 75 ohm
IEC60958 for CDDA /
LPCM
IEC61937 for MPEG 1/2
VIDEO FORMAT
Digital
Compression
6 channal analog output
MPEG 2 for DVD,SVCD
MPEG 1 for VCD
Audio Front L/R
Audio Rear L/R
Audio Center
Clinch (white/red)
Clinch (white/red)
Clinch (blue)
DVD
50Hz
60Hz
Audio Subwoofer
Clinch (black)
Horiz. resolution 720 pixels
Vertical resolution 576 lines
720 pixels
480 lines
2 channel speaker output
Audio +RCH- Clip (red/black)
Audio +LCH- Clip (red/black)
VCD
50Hz
60Hz
Horiz. resolution 352 pixels
Vertical resolution 288 lines
352 pixels
240 lines
CABINET
Dimensions (w x h x d)
Weight
360 x 37 x 237 mm
Approximately 2 kg
AUDIO FORMAT
Digital
MPEG/ AC-3/
compressed
Digital
POWER CONSUMPTION
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
Power Supply Rating
110V – 240V;
50/60Hz
< 40 W
MP3 (ISO 9660) 96, 112, 128,
256kbps &
Power consumption
Power consumption in
Standby mode
< 2 W
variable bit rate
fs, 32, 44.1, 48 kHz
Analog Sound Stereo
Dolby Surround compatible downmix from Dolby
Digital multi-channel sound
AUDIO PERFORMANCE
DA Converter
DVD
24 bit, 192 kHz
fs 96 kHz
fs 48 kHz
fs 48 kHz
fs 44.1kHz
fs 44.1kHz
4Hz- 44kHz
4Hz- 22kHz
4Hz- 22kHz
4Hz- 20kHz
4Hz- 20kHz
SVCD
CD/VCD
Line Output
Signal-Noise (1kHz)
Dynamic range(1kHz)
Crosstalk (1kHz)
> 70 dB
> 60 dB
> 70 dB
>- 65 dB
Distortion/noise (1kHz)
Speaker Output
Signal-Noise (1kHz)
Dynamic range (1kHz)
Crosstalk (1kHz)
Distortion/noise (1kHz)
Speaker Power Output
@ 10%THD
> 70 dB
> 60 dB
> 60 dB
>- 62 dB
<=10W rms/ch
(2 channels)
Frequency Response
MPEG MP3
20Hz-20kHz
MPEG Audio L3
43
dvp3136_94_eng 4.indd 43
2007-06-05 9:58:33 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital sound
has specific numerical values. These jacks send
audio through two channels, the left and right.
Multichannel: DVD is specified to have each
sound track constitute one sound field.
Multichannel refers to a structure of sound tracks
having three or more channels.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image. The
horizontal vs. vertical ratio of conventional TVs. is
4:3, and that of wide-screens is 16:9.
Parental Control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system
(TV, Stereo, etc.).
software’s level is higher than the user-set level.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
seconds, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate, or the
higher the recording speed, the better the sound
quality. However, higher bit rates use more space
on a Disc.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on
a Video CD or SVCD that supports PBC, you can
enjoy interactive-type software as well as software
having a search function.
Chapter: Sections of a picture or a music piece
on a DVD that are smaller than titles. A title is
composed of several chapters. Each chapter is
assigned a chapter number enabling you to locate
the chapter you want.
Progressive Scan: It displays all the horizontal
lines of a picture at one time, as a signal frame.
This system can convert the interlaced video from
DVD into progressive format for connection to a
progressive display. It dramatically increases the
vertical resolution.
Component Video Out Jacks: Jacks on the
back of the DVD System that send high-quality
video to a TV that has Component Video In jacks
(R/G/B, Y/Pb/Pr, etc.).
Region code: A system for allowing discs to be
played back only in the region designated
beforehand. This unit will only play discs that have
compatible region codes. You can find the region
code of your unit by looking on the product label.
Some discs are compatible with more than one
region (or ALL regions).
Disc menu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL or
OPTICAL jacks. These jacks send audio through
multiple channels, instead of just two channels as
analog does.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or
the entire album in audio software. Each title is
assigned a title number enabling you to locate the
title you want.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up to
six channels of digital audio (front left and right,
surround left and right, center and subwoofer).
TV OUT jack: Jack on the back of the DVD
System that sends video to a TV.
WMA: Windows Media Audio. Refers to an
audio compression technology developed by
Microsoft Corporation. WMA data can be
encoded by using Windows Media Player version 9
or Windows Media Player for Windows XP. Files
are recognized by their file extension “WMA.”
JPEG: A very common digital still picture format.
A still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite of
its high compression ratio.
MP3: A file format with a sound data
compression system. ‘MP3’ is the abbreviation of
Motion Picture Experts Group 1 (or MPEG-1)
Audio Layer 3. By using MP3 format, one CD-R or
CD-RW can contain about 10 times as much data
volume as a regular CD can.
44
dvp3136_94_eng 4.indd 44
2007-06-05 9:58:33 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
dvp3136_94_eng 4.indd 45
2007-06-05 9:58:33 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Philips at the Internet
DVP 3136
CLASS 1
LASER PRODUCT
SgpSL-0721/94-2
dvp3136_94_eng 4.indd 46
2007-06-05 9:58:34 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|