DVD-703
DVDVideo Player
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English -------------------------------------------------------- 5
Français------------------------------------------------------21
Español ------------------------------------------------------37
Português ---------------------------------------------------53
4
The region code for this set is 4.
Since it is usual for DVD movies to be released at
different times in different regions of the world, all
players have region codes and discs can have an optional
region code. If you load a disc of a different region code
to your player, you will see the region code notice on
the screen.The disc will not play and should be
unloaded.
NOTE:
PICTURES SHOWN MAYBE DIFFERENT
BETWEEN COUNTRIES.
NEVER MAKE OR CHANGE CONNECTIONS
WITH THE POWER SWITCHED ON.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AVOID EXPOSURE TO BEAM
(WARNING LOCATION: INSIDE ON LASER
COVERSHIELD OR THE BACKPLATE OF SET)
INDEX
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Philips DVD-Video Introduction ------------------------- 5
Unpacking ---------------------------------------------------- 5
Remote Control battery installation-------------------- 5
Safety Information ------------------------------------------ 5
Cleaning Discs ---------------------------------------------- 5
Functional Overview
Front and Rear Panels ------------------------------------- 6
Remote Control -------------------------------------------- 7
Preparation
General Notes ---------------------------------------------- 8
Connecting to aTV ---------------------------------------- 8
Connecting to Optional Equipment-------------------8-9
NTSC/PAL Settings----------------------------------------- 9
General Explanation --------------------------------------- 9
Menu Bar/StatusWindow --------------------------------10
Temporary Feedback Field Icons -----------------------10
Personal Preferences----------------------------------10-11
Operation
Loading Discs-----------------------------------------------12
Playing a DVD-Video andVideo CD -------------------12
General Features --------------------------------------12-14
Special DVD features -------------------------------------14
SpecialVideo CD & SVCD features --------------------15
Playing an Audio CD ----------------------------------15-16
FavoriteTrack Selection (FTS) Program ---------------16
Access Control
Access Control: Child Lock -----------------------------17
Access Control: Parental Control ------------------17-18
Before Requesting Service
Before Requesting Service -------------------------------19
Specifications
Specifications -----------------------------------------------20
4
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Philips DVD-Video
Introduction
Remote Control Battery
Installation
Your Philips DVD-Video player will play digital video discs
conforming to the universal DVD-Video standard.With it,
you will be able to enjoy full-length movies with true
cinema picture quality, as well as stereo or multi-channel
sound (depending on the disc and your playback setup).
The unique features on DVD-Video, such as selection of
sound track, subtitle languages and different camera angles
(again depending on the disc), are all supported.
¶
Insert batteries as indicated inside the battery
compartment.
Caution: Do not mix old and new batteries. Never
mix different types of batteries (standard, alkaline,
etc.).
-
+
In addition to DVD-Video discs, you will be able to play all
Video CDs and Audio CDs (including finalized CD
Recordable and CD Rewritable).
+
-
DVD-Video
You will recognize DVD-Video discs by the logo shown.
Depending on the material on the disc (a movie, video clips,
a drama series, etc.) the disc may have one or moreTitles.
Safety Information
DVD-VIDEO DISC
TITLE 1
TITLE 2
¶
Do not expose the system to excessive moisture, rain, sand,
or heat sources.
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2
CHAPTER 3
¶
¶
Place the player on a firm, flat surface.
Keep the player away from domestic heating equipment
and direct sunlight.
¶
¶
In a cabinet, allow about 2.5 cm (1 inch) of free space all
around the player for adequate ventilation.
Video CD
If the DVD-Video player cannot read CDs/DVDs correctly,
use a commonly available cleaning CD/DVD to clean the
lens before taking the DVD-Video player to be repaired.
Other cleaning methods may destroy the lens.Always keep
the tray closed to avoid dust on the lens.
The lens may cloud over when the DVD-Video player is
suddenly moved from cold to warm surroundings. Playing a
CD/DVD is not possible then. Leave the power on for
about one hour with no disc in the unit until normal
playback is possible.
You will recognizeVideo CDs by the logo
shown.
SuperVCD (SVCD)
¶
SVCD discs based on the SuperVCD IO Standard refering
to Standard of Electronics Industry of the People’s Republic
of China.
Audio CD
Audio CDs contain music tracks only.
You will recognize Audio CDs by the logo
shown.
Cleaning Discs
¶
¶
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center out, in a straight line.
Do not use solvents such as benzine, thinner, commercially
available cleaners, or anti-static spray intended for analog
discs.
Unpacking
First check and identify the contents of your DVD-Video
player package.
You should have the following items.
– DVD-Video player
– Remote Control with batteries
– Audio cable
– Video cable
– Instructions for use
If any item is damaged or missing, contact your retailer or
Philips.
Keep the packaging material for future transportation.
5
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Front and Rear Panels
T NEXT
– go to next chapter or track
POWER ON/OFF
– switches the player to ON or OFF
B PLAY
– to start playback
DISPLAY
– shows the current status of the player
SOUND
– selects Stereo, Dolby Surround or
3D Sound (TruSurround)
DVD 703 DVD/VIDEO CD/CD PLAYER
POWER ON/OFF
SOUND
PLAY
PREV NEXT
OPEN/CLOSE
PAUSE
STOP
by
/ OPEN/CLOSE
– opens/closes the disc tray
; PAUSE
– to interrupt playback
Disc Tray
S PREV
– go to previous chapter or track
9 STOP
– to stop playback
S-VIDEO (VIDEO OUT)
MAINS (AC Power)
– connect to a TV with S-Video (Y/C) inputs
– connect to power source
PR/CR PB/CB Y (VIDEO OUT)
COAXIAL (Digital audio out)
– connect to a TV with PR/CR PB/CB Y inputs
– connect to digital (coaxial) audio equipment
CVBS (VIDEO OUT)
– connect to a TV with CVBS video inputs
AUDIO OUT (Left/Right)
– connect to amplifier, receiver or stereo
system
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
PR/CR
Y
S-VIDEO
PB/CB
R
L
(CVBS)
COAXIAL
AUDIO OUT
VIDEO OUT
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
6
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER B
– switches DVD ON or to standby/
on mode
RETURN / RESUME
– go back to previous menu / to
continue playback after play
was stop
0-9 numerical key pad
– to select numbered items in a
menu
DISC MENU
– access menu of a DVD disc
DISPLAY
– displays bit rate indicator during
playback
1 2 3 4
– (left/right/up/down) to select
an item in the menu
OK
SYSTEM MENU
– access or remove the player’s
menu
– acknowledge menu selection
S
– search backward* / go to a
previous chapter or track
T
– search forward* / go to the next
chapter or track
STOP ( 9 )
– to stop playback
SUBTITLE
– select a subtitle language
PLAY ( B )
– to start playback
ANGLE
– select a DVD camera angle
PAUSE ( ; )
– pause playback temporarily /
frame-by-frame playback
ZOOM
– enlarge video image
AUDIO
– select an audio language
REPEAT
– repeat chapter, track, title, disc
REPEAT (A-B)
– repeat a specific segment
SHUFFLE
– play tracks in random order
SCAN
– play of the first 10 seconds of
each track/chapter within a disc
* Press and hold key for about two seconds
7
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
General Notes
TV
¶
¶
¶
Depending on yourTV and other equipment you wish to
connect, there are various ways you could connect the
player. Use only one of the connections described below.
Please refer to the manuals of yourTV,VCR, Stereo System
or other devices as necessary to make the best
connections.
For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See ‘Connecting to
optional equipment’.
Z
A
X
Y
Caution:
– Make sure the DVD player is connected directly
to theTV. Set theTV to the correct video input
channel.
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
PR/CR
P
B/CB
Y
S-VIDEO
R
L
(CVBS)
COAXIAL
AUDIO OUT
VIDEO OUT
– Do not connect the player’s audio out jack to
the phono in jack of your audio system.
– Do not connect your DVD player to theTV via
yourVCR.The DVD image could be distorted by
the copy protection system.
Connecting to Optional
Equipment
Connecting to a TV
Connecting to an amplifier equipped with
two channel analog stereo or Dolby
Surround
¶
Make one of the following connections, depending on the
capabilities of your existing equipment.
ComponentVideo (PR/CR PB/CB Y)
connection
1 Connect the Left and Right audio out jacks of the DVD
player to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the supplied audio cable
(A).
1 Connect the PR/CR, PB/CB,Y video out jacks on the DVD
player to the corresponding in jacks on theTV using an
optional PR/CR, PB/CB,Y cable (Z).
Connecting to an amplifier equipped with
two channel digital stereo (PCM) or to an
Audio/Video receiver equipped with a
multi-channel decoder (Dolby Digital™,
MPEG 2 or DTS)
2 Connect the Left and Right audio out jacks of the DVD
player to the audio left/right in jacks on theTV (A).
S-Video (Y/C) connection
1 Connect the S-Video video out jack on the DVD player to
the S-Video in jack on theTV using an optional S-Video
cable (Y).
1 Connect the player’s coaxial digital audio out jack to the
corresponding coaxial digital audio in on your amplifier. Use
an optional digital audio cable (F).
2 Connect the Left and Right audio out jacks of the DVD
2 You will need to activate the player’s digital output (see
player to the audio left/right in jacks on theTV (A).
‘Personal Preferences’).
CVBS connection
Digital Multi-channel sound
The digital multi-channel connection provides the best
sound quality. For this you need a multi-channel Audio/
Video receiver that supports one or more of the audio
formats supported by your DVD player (MPEG 2, Dolby
Digital™ or DTS). Check the receiver manual and the logos
on the front of the receiver.
1 Connect the CVBS video out jack on the DVD player to
the video in jack on theTV using the video cable supplied
(X).
2 Connect the Left and Right audio out jacks to the audio
left/right in jacks on theTV (A).
8
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
General explanation
AMPLIFIER
About this manual
This manual gives the basic instructions for operating the
DVD player. Some DVDs require specific operation or
allow only limited operation during playback.When this
occurs, the symbol Ä appears on theTV screen, indicating
that the operation is not permitted by the player or the
disc.
TV
F
A
Y
X
Z
Remote control operation
¶
Unless stated, all operations can be performed by the
remote control.Always point the remote control directly at
the player, making sure there are no obstructions between
the remote and the player.
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
PR/CR
PB/CB
Y
S-VIDEO
R
L
(CVBS)
COAXIAL
AUDIO OUT
VIDEO OUT
Corresponding keys on the front panel of the player can
also be used.
Note:
Menu bar operation
– If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver has a Digital Multi-
channel decoder.
¶
A number of operations can be done with the menu bar
on the screen.The menu bar can be accessed by pressing
the cursor keys on the remote control.
Pressing SYSTEM MENU while the menu bar is displayed
will clear the menu bar from the screen.
The selected item will be highlighted, and the appropriate
cursor keys to operate it will be displayed below the icon.
The symbols < or > indicates that more items are available
at the left/right of the menu bar. Press 1or 2to select
these items.
¶
¶
¶
– To see the selected audio format of the current DVD in the
StatusWindow, press SYSTEM MENU or Audio.
NTSC/PAL Settings
You can switch the NTSC/PAL setting of the DVD player to
match the video signal of yourTV.This setting only affects
the television’s on-screen display that shows the stop and
setup modes.You may select either NTSC or PAL.To
change the DVD player setting to PAL or NTSC, follow the
steps below.
1 Press the POWER ON/OFF button on the front panel of
the DVD player to turn OFF the DVD player.
2 Press and hold 9and Ton the front of the DVD player.
While holding 9and Tpress POWER ON/OFF.
3 After PAL or NTSC appears on the display panel of the
DVD player, release 9and Tat the same time.The PAL
or NTSC indicator that appears on the display panel
indicates the current setting.
4 To change the setting, press Twithin three seconds.The
new setting (PAL or NTSC) will appear on the display
panel.
9
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Bar/Status Window
Personal Preferences
As there are multiple menu bars, the items on the menu
bar are arranged according to usage and availability of
direct access keys. Pressing the SYSTEM MENU keys
repeatedly will toggle through menu bar 1, menu bar 2,
menu bar 3 and OFF.
You can set your own personal preferences on the player.
General operation:
¶
¶
Press SYSTEM MENU on the remote control.
Select in the menu bar.
➜The Personal Preferences menu appears.
Use the 1 2 3 4keys to toggle through the menus,
submenus and submenu options.
➜ When a menu item is selected, the cursor keys (on the
remote control) to operate the item are displayed next to
the item.
Press OK to confirm and return to the main menu.
The following items can be adapted:
Menu bar 1
¶
Personal Preferences
Subtitle Language
Audio Language
Color
¶
Sound
Menu bar 2
Picture
– TV Shape
Step by step playback
Slow motion
Fast motion
Angle
If you have a wide screen (16:9)TV, select 16:9.
If you have a regular (4:3)TV, select 4:3.
If you have a 4:3TV, you can also select between:
Letterbox for a ‘wide-screen’ picture with black bars at the
top and bottom of the screen, or Pan Scan, for a full-height
picture with the sides trimmed. If a disc supports the
format, the picture will be shown accordingly.
Zoom
Menu bar 3
Title
Chapter
– Black level shift (NTSC users only)
Time Search
Select ON for adapting the color dynamics to obtain richer
contrasts.
FavoriteTrack Selection (FTS)
Temporary Feedback Field
Icons
Scan
Repeat All
RepeatTitle
RepeatTrack
Repeat Chapter
Shuffle
– Video shift
The factory centers the video on yourTV screen. Use this
setting to personalize the position of the picture on your
TV by moving it to the left or right.
Shuffle Repeat
Repeat A to end
Repeat A-B
Angle
Child Lock On
Child Safe
Resume
Action prohibited
10
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Features
– Digital output
– Access Control
Factory setting:ALL.This means coaxial output is on. If you
are not connecting equipment with a digital input, change
the setting to OFF.
Access Control contains the following features:
Child Lock - When Child Lock is set to ON, a 4-digit code
must be entered in order to play discs.
If your equipment doesn't include a digital multi-channel
decoder, set the digital output to PCM only (Pulse Code
Modulation).
Parental control - Allows the conditional viewing of DVDs
containing Parental Control information (see ‘Access
Control’).
– StatusWindow
Displays the current status of the player and is displayed
with the menu bar. When disc playback is stopped, it is
displayed with the ‘Temporary Feedback Field’ in the default
screen. See ‘On-Screen Display’ information.
The factory setting is ON. Select OFF to suppress display of
the Status Window.
– Analog output
Select Stereo, Dolby Surround or 3D Sound (TruSurround)
to match your system’s playback capability.
– Bit Rate Indicator
When activated, the bit rate for video and audio as well as
the total bit rate is displayed.This is only applicable during
playback of DVD and SVCD discs.
– Night Mode
Optimizes the dynamics of the sound for low volume
playback.
– Karaoke vocal
– Help text
Put this setting to ON only when a multi-channel karaoke
DVD is being played.The karaoke channels on the disc will
then be mixed into a normal stereo sound.
When set to ON, help text describes the icons selected.
Select OFF if you no longer require the help text.
Language
Select the required Menu,Audio and Subtitle language.
Audio language and Subtitle language can also be adapted
using the Menu bar.
11
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Loading Discs
General Features
Note:
1 Press OPEN/CLOSE on the front of the player to open the
disc tray.
– Unless stated, all operations described are based on remote
control use. Some operations can be carried out using the
menu bar on the screen.
2 Load your chosen disc in the tray, label side up.
3 Press OPEN/CLOSE again to close the tray.
➜ READ appears in the status window and on the player
display, and playback starts automatically.
Moving to another title/
chapter
Note:
– If ‘Child Lock’ is set to ON and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc
must be authorized (see ‘Access Control’).
When a disc has more than one title or
chapter, you can move to another title/chapter as follows:
Press SYSTEM MENU, then select or in the menu
bar.
¶
¶
Press 3or 4to select a title/chapter.
Playing a DVD-Video and
Video CD
Slow Motion
¶
¶
Select (SLOW MOTION) in the menu bar.
Use the 4keys to enter the SLOW MOTION menu.
➜The player will now go into PAUSE mode.
Use the cursor keys 12to select the required speed: -1,
-1/2, -1/4 or -1/8 (backward), or +1/8, +1/4, +1/2 or +1
(forward).
Select 1 to play the disc at normal speed again.
If ;is pressed, the speed will be set to zero (PAUSE).
To exit slow motion mode, press Bor 3.
Playing a disc
¶
After inserting the disc and closing the
tray, playback starts automatically.The
status window of the player display shows
the type of disc loaded, as well as the disc’s
information and playing time.
The disc may invite you to select an item from
a menu. If the selections are numbered, press
the appropriate numerical key; if not, use the
4312keys to highlight your selection, then press OK.
The number of the current title and chapter are displayed.
Playback may stop at the end of theTitle and you may
return to the DVD disc menu.To go to the next title, press
B.
¶
¶
¶
¶
¶
Still Picture and Frame-by-frame playback
¶
¶
¶
¶
Select (STEP) in the menu bar.
Use the 4key to enter the picture by
picture menu.
➜The player will now go into PAUSE
mode.
¶
¶
To stop playback, press 9.
➜The default screen will appear, giving information about
the current status.
You can resume playback from the point at which you
stopped playback. Press B; when you see the Resume icon
.on the screen, press Bagain.
➜The RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc and press RESUME on the remote control
or, press Bwhen you see the Resume icon .on the
screen, then press Bagain.
¶
¶
Use the cursor keys 12to select the previous or next
picture frame.
To exit STEP mode, press Bor 3.
You can also step forward by pressing ;repeatedly on the
remote control.
Scan
Scanning plays the first 10 seconds of each
chapter/index on the disc.
¶
¶
Press SCAN.
Note:
To continue playback at your chosen track, press SCAN
again or press B.
– DVDs may have a region code.Your player will not play
discs that have a region code different from the region code of
your player.
12
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Search
Time search
TheTime Search function allows you to start playing at any
chosen time on the disc.
Select (TIME SEARCH) in the menu bar.
Press 4.
➜The player will now go into PAUSE mode.
➜ A time edit box appears on the screen, showing the
elapsed playing time of the current disc.
Use the digit keys to enter the required start time. Enter
hours, minutes and seconds from left to right in the box.
➜ Each time an item has been entered, the next item will
be highlighted.
¶
¶
¶
Select (FAST MOTION) in the menu
bar.
Use the 4keys to enter the FAST
MOTION menu.
Use the 12keys to select the required speed: -32, -8 or -4
(backward), or +4, +8, +32 (forward).
Select 1 to play the disc at normal speed again.
To exit FAST MOTION mode, press Bor 3.
¶
¶
¶
¶
¶
¶
To search forward or backward through different speeds,
you can also hold down Sor T.
Press OK to confirm the start time.
➜The time edit box will disappear and playback starts
from the selected time on the disc.
Repeat
DVD-Video Discs - Repeat chapter/
title/disc
¶
¶
To repeat the currently playing chapter,
press REPEAT.
➜ REPEAT CHPT appears on the player display.
To repeat the title currently playing , press REPEAT a
second time
➜ REPEAT TITL appears on the display.
To repeat the entire disc, press REPEAT a third time
➜ REPEAT appears on the display.
To exit Repeat mode, press REPEAT a fourth time.
Zoom
¶
¶
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
Select (ZOOM).
Press 3/4to activate the ZOOM function and select the
required zoom factor: 1.33 or 2 or 4.
➜The player will go into Pause mode.
➜The selected zoom factor appears below the Zoom icon
in the menu bar, and ‘Press OK to pan’ appears below the
menu bar.
¶
¶
Video CDs - Repeat track/disc
¶
¶
¶
To repeat the track currently playing , press REPEAT.
➜ REPEAT TRK appears on the player display.
To repeat the entire disc, press REPEAT a second time.
➜ REPEAT appears on the display and the screen.
To exit Repeat mode, press REPEAT a third time.
➜The picture will change accordingly.
Press OK to confirm the selection.
Repeat A-B
¶
➜The panning icons appear on the screen.
Use the 1234keys to pan across the screen.
When OK is pressed only the zoomed picture will be
shown on the screen.
To exit ZOOM mode:
– Press B to resume playback.
To repeat a sequence in a title:
Press REPEAT A-B at your chosen starting
point.
➜ A- appears briefly on the screen.
Press REPEAT A-B again at your chosen end point.
➜ REPEAT A-B appears briefly on the display, and the repeat
sequence begins.(REPEAT A-B is displayed on the front panel
of the player)
¶
¶
¶
¶
¶
¶
To exit the sequence, press REPEAT A-B.
Shuffle
DVD-Video discs
This shuffles the playing order of chapters
within a title, if the title has more than one chapter.
Press SHUFFLE during playback.
¶
➜ SHUFFLE appears on the screen for about two
seconds.
¶
¶
To return to normal playback, press SHUFFLE again.
Video CDs
Press SHUFFLE during playback.
➜ SHUFFLE appears on the screen for about two
seconds.
¶
To return to normal playback, press SHUFFLE again.
13
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
FTS-Video
Special DVD Features
¶
The FTS-Video function allows you to store your favorite
titles and chapters (DVD) and favorite tracks and indexes
(VCD) for a particular disc in the player memory.
FTS program can contain 20 items (titles, chapters).
An programmed FTS will be placed on top of the list when
playback is activated.When the list is full, a new program
will replace the last program on the list.
Checking the contents of DVD-Video discs:
Menus
¶
¶
DVDs may contain menus to navigate the disc and access
special features.To use the menu, press the appropriate
numerical key or use the 4, 3, 2, 1keys to highlight your
selection, then press OK.
¶
The program can be selected and played at any time.
Title/Disc menu
Storing an FTS-Video Program
¶
¶
¶
While playback is stopped, select VIDEO FTS c in the
menu bar.
Press 4to open the menu.
➜The VIDEO FTS menu appears.
Press 2or 1or FTS to select ON or OFF.
¶
Press DISC MENU.
➜ If the current title has a menu, the menu will appear on
the screen. Otherwise, the disc menu will be displayed.
The menu can list camera angles, spoken language and
subtitle options, and chapters for the title.
¶
¶
To remove the title menu, press DISC MENU again.
Storing titles/tracks
¶
¶
¶
Press 4to select TITLES.
Camera Angle
Use 2and 1to select the required title.
Press OK if you wish to store the entire title.
➜The title number will be added to the list of selections.
If the disc contains sequences recorded from different
camera angles, the angle icon appears, showing the number
of available angles and the angle being shown currently.You
can then change the camera angle if you wish.
Use the 3/4keys to select the required angle icon.
➜ After a while, playback changes to the selected angle.The
angle icon remains displayed until multiple angles are no
longer available.
¶
Storing chapters/indexes
Changing the audio language
¶
Press 4on the selected title number.
➜The title number will be marked and the highlight moves
to the first available chapter number for this title.
Use 2and 1to select the required chapter number.
Press OK to confirm the selection.
¶
¶
Select Y (AUDIO) in the menu bar.
Press Y or 3/4repeatedly to see the different languages.
¶
¶
➜The title/chapter selection will be added to the list of
selections.
¶
¶
Press SYSTEM MENU to exit the VIDEO FTS c menu.
Erasing an FTS-Video Program
Subtitles
While playback is stopped, select VIDEO FTS c in the
menu bar.
Use 4to select PROGRAM.
Use 2and 1to select the required number.
Press OK to erase the selection.
Press SYSTEM MENU to exit.
¶
¶
Select Z (SUBTITLE) in the menu bar.
Press Z or 3/4repeatedly to see the different subtitles.
¶
¶
¶
¶
Erasing all selections
¶
While playback is stopped, select VIDEO FTS c in the
menu bar.
¶
¶
Use 4to select CLEAR ALL.
Press OK.
➜ All selections will be erased.
Press SYSTEM MENU to exit.
¶
14
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Pause
Special Video CD & SVCD
Features
¶
¶
Press ;during playback.
To return to playback, press B.
Playback Control (PBC)
Search
¶
¶
Load aVideo CD with PBC and press B.
¶
To search forward or backward through
the disc at four times normal speed, hold
down Sor Tfor about one second
during playback.
➜ Search begins, and sound is partially muted.
To step up to eight times the normal speed, press Sor
Tagain.
Go through the menu with the keys indicated on theTV
screen until your chosen passage starts to play. If a PBC
menu consists of a list of titles, you can select a title directly.
Enter your choice with the numerical keys (0-9).
Press RETURN to go back to the previous menu.
You may also set to PBC OFF under Personal
Preferences.
¶
¶
¶
¶
➜ Search goes to eight times the speed, and the sound is
muted.
¶
¶
¶
To return to four times the normal speed, press Sor
Tagain.
If theTV is on, search speed and direction are indicated on
the screen each time Sor Tis pressed.
To end the search, press Bto resume playback or press 9
to stop playback.
Playing an Audio CD
¶
¶
¶
After loading the disc, playback starts automatically.
If theTV is on, the Audio CD screen appears.
The number of tracks and the total playing time of the disc
will be shown on the screen.
¶
During playback, the current track number and its elapsed
playing time will be shown on the screen and on the player
display.
Moving to another track
¶
Press Sor Tbriefly during playback to go to the
next track or to return to the beginning of the current
track.
¶
¶
Playback will stop at the end of the disc.
To stop playback at any other time, press 9.
¶
¶
Press Stwice briefly to step back to the previous track.
To go directly to any track, enter the track number using
the numerical keys (0-9).
Shuffle
¶
¶
Press SHUFFLE during playback.
➜The order of the tracks is changed.
To return to normal playback, press
SHUFFLE again.
15
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat track/disc
Favorite Track Selection (FTS)
Program
¶
To repeat the track currently playing, press
REPEAT.
¶
¶
The FTS Program allows you to store your favorite tracks
for a particular disc in the player memory.
Each FTS Program can contain 20 tracks.
➜ REPEAT TRK appears on the display.
To repeat the entire disc, press REPEAT a second time.
➜ REPEAT appears on the display.
¶
¶
To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat a sequence:
¶
¶
¶
Press REPEAT A-B at your chosen starting
point.
➜ A- appears on the player display.
Press REPEAT A-B again at your chosen end point.
➜ A-B appears on the display, and the sequence begins to
play repeatedly.
To exit the sequence, press REPEAT A-B again.
Storing an FTS Program
Scan
Scanning plays the first 10 seconds of each
track on the disc.
Press SCAN.
To continue playback at your chosen track, press SCAN
again or press B.
1 Load a disc and stop playback.
2 Use 4to go to the list of available tracks.
3 Use 2or 1to select tracks from the list.
To go directly to any track, enter the track number using
the numerical keys (0-9).
¶
¶
4 Store each track by pressing OK.
➜The track numbers will be added to the list.
➜The number of tracks and the playing time of the
program will be shown on the screen and the player display.
When your FTS Program is complete, press Bto start
playback or, press 3to go back to Stop mode. In either
case, the FTS Program will be automatically memorized.
Switching FTS ON/OFF
1 Use 34to move to select desired tracks.
2 Use 2or 1to select either ON or OFF.
Erasing a track from an FTS Program
1 Use 4to go to the list of selected tracks.
2 Use 2and 1to select the track number you wish to erase.
3 Press OK.
➜The track number will be erased from the list of selected
tracks.
Erasing the complete program
1 Use 4to select CLEAR ALL, then press OK.
➜The complete FTS Program for the disc will be erased.
16
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Control
Access Control: Child Lock
(DVD-Video and Video CD)
Activating/deactivating the Child Lock
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4keys.
2 Enter a 4-digit code of your own choice.
3 Enter the code a second time.
4 Move to “CHILD LOCK” using the 3/4keys.
5 Move to LOCK/UNLOCK using the 2key.
6 Select LOCK using the 3/4keys.
7 Press OK or 1to confirm, then press 1again to exit the
menu.
➜ Now unauthorized discs will not be played unless the
4-digit code is entered.
Deauthorizing discs
8 Select UNLOCK to deactivate the CHILD LOCK.
¶
¶
Insert the disc. See ‘Loading disc’.
➜ Playback starts automatically.
Press 9while { is visible.
➜The | will appear and the disc is now deauthorized.
Note: Confirmation of the 4-digit code is necessary when:
– The code is entered for the very first time (see above),
– The code is changed (see ‘Changing the 4-digit code’),
– The code is cancelled (see ‘Changing the 4-digit code’).
Access Control: Parental
Control (DVD-Video only)
Movies on DVDs may contain scenes not suitable for
children.Therefore, discs may contain ‘Parental Control’
information which applies to the complete disc or to
certain scenes on the disc.These scenes are rated from 1
to 8, and alternative, more suitable scenes are available on
the disc. Ratings are country dependent.The ‘Parental
Control’ feature allows you to prevent discs from being
played by your children or to have certain discs played with
alternative scenes.
Authorizing discs
¶
Insert the disc. See ‘Loading disc’.
➜The ‘child protect’ dialog will appear.
You will be asked to enter your secret code for ‘Playback
Once ‘or ‘Playback Always.’ If you select ‘Playback Once’, the
disc can be played as long as it is in the player and the
player is ON. If you select ‘Playback Always’, the disc will
become child safe (authorized) and can always be played,
even if the Child Lock is set to ON.
Notes:
– The player memory maintains a list of 120 authorized
(‘Child safe’) disc titles.A disc will be placed in the list when
‘Playback Always’is selected in the‘child protect’ dialog.
– Each time a ‘child safe’ disc is played, it will be placed on
top of the list.When the list is full and a new disc is added, the
last disc in the list will be removed from the list.
– Double-sided DVDs may have a different ID for each side.
In order to make the disc ‘child safe’, each side has to be
authorized.
– Multi-volumeVCDs may have a different ID for each
volume. In order to make the complete set ‘child safe’, each
volume has to be authorized.
17
ACCESS CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating/Deactivating Parental Control
Changing the 4-digit code
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4keys.
2 Enter your 4-digit code. If necessary, enter the code a
second time.
3 Move to Parental Control using the 3/4keys.
4 Move to VALUE ADJUSTMENT (1-8) using the 2key.
5 Then use the 3/4keys or the numerical keys on the
remote control to select a rating from 1 to 8 for the disc
inserted.
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4keys.
2 Enter the old code.
3 Move to CHANGE CODE using the 4key.
4 Press the 2key.
5 Enter the new 4-digit code.
6 Enter the code a second time and reconfirm by pressing
OK.
7 Press 1to exit the menu.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated.The Disc will be played in
full.
If you forget your 4 digit code
1 Press 9to exit the ‘Child Protect’ screen.
Ratings 1 to 8:
2 Select ACCESS CONTROL in the features menu using
The disc contains scenes not suitable for children. If you set
a rating for the player, all scenes with the same rating or
lower will be played. Higher rated scenes will not be played
unless an alternative is available on the disc.The alternative
must have the same rating or a lower one. If no suitable
alternative is found, playback will stop and the 4-digit code
has to be entered.
the 3/4keys.
3 The 4-digit code can be cancelled by pressing 9four times
in the ‘Access Control’ dialog.
4 You can then enter a new code (twice!) as described above
(Changing the 4 digit code).
Parental Control Disclaimer
6 Press OK or 1to confirm, then press 1again to exit the
menu.
This DVD player features the PARENTAL CONTROL
system which is intended to activate when playing DVD
discs furnished with certain software coding.This is
according to technical standards adopted by the set maker
and disc content industries.
Please note that the PARENTAL CONTROL system
will not operate a DVD disc which is not furnished with the
appropriate software coding.Also note that at the time of
release of this DVD player, certain aspects of the technical
standards had not been settled between set makers and
the disc industries.
On this basis, Philips cannot guarantee the functioning of
the PARENTAL CONTROL system and denies any
liability associated with unintended watching of disc
content.
Country
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4keys.
2 Enter the 4-digit code.
3 Move to CHANGE COUNTRY using the 4key.
4 Press the 2key.
If in doubt, please make sure the disc plays according to
your PARENTAL CONTROL settings before you allow
children access to the player.
5 Select a country using 3/4.
6 Press OK or 1to confirm, then press 1again to exit the
menu.
18
ACCESS CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Requesting Service
If it appears that the DVD-Video player is faulty, first consult this checklist. Something may have been overlooked. Under no
circumstances should you attempt to repair the system yourself; this will invalidate the warranty.
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).
Symptom
Remedy
No power
– Make sure the mains cord (AC Power) is properly connected.
– Check if there is power at the AC outlet by plugging in another appliance.
No picture
– Check if theTV is switched on.
– Check the video connection.
Distorted picture
– Check the disc for fingerprints and clean the disc with a soft cloth, wiping
from the center to the edge in a straight line.
– Sometimes a small amount of picture distortion may appear .This is not a
malfunction.
Completely distorted picture
or no color with player menu
– If the picture is distorted completely or if the picture rolls vertically,
make sure the NTSC/PAL setting at the DVD player matches the video
signal of your television.
– If yourTV video signal is NTSC, select the NTSC setting at the DVD player.
– If your video signal is PAL, select the PAL setting. - See NTSC/PAL SETTINGS.
Distorted or black/white picture
with DVD orVideo CD
– The disc format does not match yourTV’s video signal (PAL/NTSC).
No sound
– Check audio connections.
– If you are using a HiFi amplifier, try another sound source.
Distorted sound from HiFi
amplifier
– Check to make sure that no audio connections are made to the amplifier’s
phono input.
No audio at digital output
– Check the digital connections.
– Check the settings menu to make sure the digital output is set to ALL or
PCM.
– Check if the audio format of the selected audio language matches your
receiver capabilities.
Disc can’t be played
– Ensure the disc label is facing up.
– Clean the disc.
– Check if the disc is defective by trying another disc.
– Check to see if the disc is defective, badly scratched or warped (not flat).
No return to start-up screen when
disc is removed
– Reset by switching the player off, then on again.
– Check to see if the program requires another disc to be loaded.
The player does not respond to
the remote control
– Aim the remote control directly at the sensor on the front of the player.
– Remove any obstacles between the player and the remote control.
– Inspect or replace the batteries in the remote control.
Buttons do not work
– In order to completely reset the player, unplug the AC cord from the AC
outlet. (Please ensure that the set is not in Initial Setup mode)
Player does not respond to some
operating commands during
playback
– Operations may not be permitted by the disc. Refer to the instructions of
the disc.
DVD-Video player cannot read
CDs/DVDs
– Use a commonly available cleaning CD/DVD to clean the lens before
sending the DVD-Video player for repair.
19
Download from Www.Somanuals.com. All Manuals Search AndBDoEwFnOloaRdE. REQUESTING SERVICE
Specifications
PLAYBACK SYSTEM
DVD-Video
CONNECTIONS
Y Output
Cinch (green)
Video CD & SVCD
CD (CD-Recordable and CD-Rewritable)
DVD+RW
PB/CB Output
PR/CR Output
S-Video Output
Video Output
Audio L+R output
Digital Output
Cinch (blue)
Cinch (red)
Mini DIN, 4 pins
Cinch (yellow)
Cinch (white/red)
1 coaxial
OPTICAL READOUT SYSTEM
Lasertype
Semiconductor AlGaAs
Numerical Aperture
0.60 (DVD)
IEC958 for CDDA / LPCM
IEC1937 for MPEG1/2, Dolby Digital and DTS
0.45 (VCD/CD)
650 nm (DVD)
780 nm (VCD/CD)
Wavelength
CABINET
Dimensions (w x h x d)
Weight
435 x 92 x 320 mm
Approximately 4 Kg
DVD DISC FORMAT
Medium
Diameter
Playing time
(12cm)
Optical Disc
12cm (8cm)
One layer
Dual layer
Two side
GENERAL FUNCTIONALITY
Stop / Play / Pause
Fast Forward / Backward
Time Search
2.15 h*
4 h*
4.30 h*
Single layer
Two side
Step Forward / Backward
Slow Motion
8 h*
Dual layer
Title / Chapter /Track Select
Skip Next / Previous
VIDEO FORMAT
DA Converter
Repeat (Chapter /Title / All) or (Track / All)
A-B Repeat
10 bits
Signal handling
Digital Compression
Components
MPEG2 for DVD,
MPEG1 forVCD
Shuffle
Scan
New enhanced user graphical interface
Perfect Still with digital multi-tap filter
Zoom (xl.33, x2. x4) with picture enhancement
Screen Saver (Dim 75% after 15 minutes)
3D Sound (TruSurround)
Virtual Jog Shuttle
TV STANDARD
Number of lines
Playback
(PAL/50Hz)
625
Multistandard
(NTSC/60Hz)
525
(PAL/NTSC)
DVD
Audio and video bit rate indicator
Horizontal Resolution
Vertical Resolution
720 pixels
576 lines
720 pixels
480 lines
DVD FUNCTIONALITY
Multi-angle Selection
VCD
Horizontal Resolution
Vertical Resolution
Audio Selection (one out of maximum eight languages)
Subtitles Selection (one out of maximum 32 languages)
Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Pan Scan)
Parental Control and Disk Lock
352 pixels
288 lines
352 pixels
240 lines
VIDEO PERFORMANCE
Video output
Disc Menu support (Title Menu and Access Control)
Resume (5 discs) after stop / standby
1Vpp into 75 ohm
S-Video output
Y: 1Vpp into 75 ohm
C: 0.3Vpp into 75 ohm
Y: 1Vpp into 75 ohm
PB/CB PR/CR: 0.7Vpp into 75 ohm
On/Off
ProgrammingTitles/chapters with FavoriteTrack Selection
Y PB/CB PR/CR output
VIDEO CD FUNCTIONALITY
Playback Control forVCD 2.0 discs
Disc Lock
Resume (5 discs) after stop / standby
ProgrammingTracks with FavoriteTrack Selection
Black Level Shift
Video Shift
Left/Right
AUDIO FORMAT
Digital
MPEG
Compressed Digital
AUDIO CD FUNCTIONALITY
DTS/Dolby Digital
PCM
Time Display (Total /Track / RemainingTrackTime)
Full audio functionality with remote control
Programming with FavoriteTrack Selection
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
Analog Sound Stereo
Dolby Pro Logic downmix from Dolby Digital multi-channel sound
3D Sound (TruSurround) for virtual 5.1 channel sound on 2 speakers
*
typical playing time for movie with 2 spoken languages and 3 subtitle languages
AUDIO PERFORMANCE
Specifications subject to change without prior notice
DA Converter
DVD
24 bits
fs 96 kHz
fs 48 kHz
fs 44.1 kHz
fs 44.1 kHz
4 Hz - 44 kHz
4 Hz - 22 kHz
4 Hz - 20 kHz
4 Hz - 20 kHz
100 dB
97 dB
110 dB
88 dB
Video CD
CD
Signal-Noise (1kHz)
Dynamic Range (1kHz)
Crosstalk (1kHz)
Distortion and Noise (1kHz)
20
SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
|