Philips Cordless Telephone SE6590 User Manual

www.philips.com/welcome

SE6590

US-EN Telephone Answering Machine

Warning

Use only rechargeable batteries.

Charge the handset for 24 hours before use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of contents

1.1

Safety Information

Equipment Approval

Information

Notification to the Local

6.2

Registering the handset

Checking the

signal strength

1.3

Interference Information

Hearing Aid Compatibility

(HAC)

FCC RF Radiation

Exposure Statement

1.4

2.2

Electric, Magnetic and

Electromagnetic Fields

(“EMF”)

Using the Intercom and

Conference Calling

Using the Intercom

Intercom another unit

Transfer an external call to

another unit

Answer an external call

during intercom

Switch between an internal

Recycle your batteries

The RBRC^®seal

Overview of your handset 11

Display icons and Message s 1 4

Establish a three-party

Change the Handset Nam e 2 1

Install the batteries

Charge the batteries

Remove/Attach belt clip 16

Install optional headset 17

Table of contents

Download from Www.Somanuals.com. All Manuals Search And Download.

9.3

9.4

Change the

Display Language

Select the

Display Wallpaper

9.5

9.6

9.7

9.8

Select the Color Theme 22

Set the Display Contrast 23

Set the Backlight Time

Deactivate/Activate Auto

Hang-Up

Table of contents

Download from Www.Somanuals.com. All Manuals Search And Download.

A plug and jack used to connect this

equipment to the premises wiring and

telephone network must comply with the

applicable FCC Part 68 rules and

requirements adopted by the ACTA. A

compliant telephone cord and modular

plug is provided with this product. It is

designed to be connected to a

1 Safety

Information

1.1

Equipment Approval

Information

compatible modular jack that is also

compliant. See installation instructions

for details.

Your telephone equipment is approved

for connection to the public switched

telephone network and is in compliance

with parts 15 and 68, FCC Rules and

Regulations and the Technical

Notes

•

This equipment may not be used on

coin service provided by the

telephone company.

Requirements for Telephone Terminal

Equipment published by the ACTA.

•

Party lines are subject to state tariffs,

and therefore, you may not be able to

use your own telephone equipment if

you are on a party line. Check with

your local telephone company.

Notice must be given to the

telephone company upon permanent

disconnection of your telephone from

your line.

If your home has specially wired alarm

equipment connected to the

telephone line, ensure the installation

of this product does not disable your

alarm equipment. If you have

questions about what will disable

alarm equipment, consult your

telephone company or a qualified

installer.

1.1.1 Notification to the Local

Telephone Company

On the bottom of this equipment is a

label indicating, among other

•

information, the US number and Ringer

Equivalence Number (REN) for the

equipment. You must, upon request,

provide this information to your

telephone company.

The REN is useful in determining the

number of devices you may connect to

your telephone line and still have all of

these devices ring when your telephone

number is called. In most (but not all)

areas, the sum of the RENs of all devices

connected to one line should not exceed

5. To be certain of the number of devices

you may connect to your line as

determined by the REN, you should

contact your local telephone company.

Safety Information

Download from Www.Somanuals.com. All Manuals Search And Download.

1.1.2 Rights of the Phone

1.2

Interference Information

Company

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful

interference; and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part 15

of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation.

If this equipment does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct the

interference by one or more of the

following measures:

Should your equipment cause trouble on

your line, which may harm the telephone

network, the telephone company shall,

where practicable, notify you that

temporary discontinuance of service may

be required. Where prior notice is not

practicable and the circumstances

warrant such action, the telephone

company may temporarily discontinue

service immediately. In case of such

temporary discontinuance, the telephone

company must:

(1) promptly notify you of such

temporary discontinuance; (2) afford you

the opportunity to correct the situation;

and (3) inform you of your right to bring

a complaint to the Commission pursuant

to procedures set forth in Subpart E of

Part 68, FCC Rules and Regulations.

The telephone company may make

changes in its communications facilities,

equipment, operations or procedures

where such action is required in the

operation of its business and not

inconsistent with FCC rules and

Regulations. If these changes are

expected to affect the use or

performance of your telephone

equipment, the telephone company must

give you adequate notice, in writing, to

allow you to maintain uninterrupted

service.

•

Reorient or relocate the receiving

antenna (that is, the antenna for radio

or television that is “receiving” the

interference).

•

Reorient or relocate and increase the

separation between the

telecommunications equipment and

receiving antenna.

Safety Information

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Connect the telecommunications

equipment to an outlet on a circuit

different from that to which the

receiving antenna is connected.

your body. This transmitter must not be

co-located or operating in conjunction

with any other antenna or transmitter.

For hand held operation, this phone has

been tested and meets the FCC RF

exposure guidelines. Use of other

If these measures do not eliminate the

interference, please consult your dealer

or an experienced radio / television

technician for additional suggestions.

Also, the Federal Communications

Commission has prepared a helpful

booklet, “How To Identify and Resolve

Radio/TV Interference Problems”. This

booklet is available from the U.S.

Government Printing Office,

accessories may not ensure compliance

with FCC RF exposure guidelines.

Important

Washington, D.C. 20402.

Please specify stock number 004-000-

00345-4 when ordering copies.

Notice: The changes or modifications

not expressly approved by the party

responsible for compliance could void

the user’s authority to operate the

equipment.

Take time to read this user manual

before you use your phone. It contains

important information and notes

regarding your phone.

NOTICE: This product meets the

applicable Industry Canada technical

specifications.

1.3

Hearing Aid Compatibility

(HAC)

The equipment must be installed using an

acceptable method of connection. The

customer should be aware that

compliance with the above conditions

may not prevent degradation of service

in some situations.

This telephone system meets FCC and

Industry Canada standards for Hearing

Aid Compatibility.

Repairs to certified equipment should be

made by an authorized Canadian

maintenance facility designated by the

supplier. Any repairs or alterations made

by the user to this equipment, or

equipment malfunctions, may give the

telecommunications company cause to

request the user to disconnect the

equipment.

1.4

FCC RF Radiation Exposure

Statement

This equipment complies with FCC RF

radiation exposure limits set forth for an

uncontrolled environment. This

equipment should be installed and

operated with a minimum distance of

20 centimeters between the radiator and

Important

Download from Www.Somanuals.com. All Manuals Search And Download.

Users should ensure for their own

protection that the electrical ground

connections of the power utility,

telephone lines and internal metallic

water pipe systems, if present, are

connected together. This precaution may

be particularly important in rural areas.

CAUTION: Users should not attempt to

make such connections themselves, but

should contact the appropriate electric

inspection authority, or electrician, as

appropriate.

recommended by Philips: risk of

explosion.

Always use the cables provided with

the product.

•

Handsfree activation could suddenly

increase the volume in the earpiece to

a very high level: make sure the

handset is not too close to your ear.

This equipment is not designed to

make emergency calls when the

power fails. An alternative has to be

made available to allow emergency

calls.

Do not expose the phone to

excessive heat caused by heating

equipment or direct sunlight.

Do not drop the phone or allow

objects to fall on the phone.

Do not use any cleaning agents

containing alcohol, ammonia, benzene,

or abrasives as these may harm the

set.

•

NOTES: This equipment may not be used

on coin service provided by the

telephone company.

•

2.1

Power requirements

•

This product requires an electrical

supply of 100-240 volts AC. In case of

power failure, the communication can

be lost.

•

The electrical network is classified as

hazardous. The only way to power

down the charger is to unplug the

power supply from the electrical

outlet. Ensure that the electrical

outlet is always easily accessible.

Warning

•

Do not use the product in places

where there are explosive hazards.

Do not let small metal objects come

into contact with the product. This

can deteriorate audio quality and

damage the product.

•

Active mobile phones in the vicinity

may cause interference.

To avoid damage or malfunction:

•

Do not allow the charging contacts or

the battery to come into contact with

metal objects.

Do not open the unit as you could be

exposed to high voltages.

Do not allow the charger to come

into contact with liquids.

Never use any other battery than the

one delivered with the product or

About operating and storage

temperatures:

•

Operate in a place where the

temperature is always between 0 and

35º C (32 to 95º F).

•

Store in a place where the

temperature is always between -20

and 70º C (-4 to 158º F).

Important

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Battery life may be shortened in low

temperature conditions.

2.3

Recycle your batteries

Do not dispose of your rechargeable

batteries. Call the toll fee number 1-800-

822-8837 to get instructions on how to

recycle your batteries.

2.2

Electric, Magnetic and

Electromagnetic Fields

(“EMF”)

1. Philips Royal Electronics

manufactures and sells many

consumer-oriented products, which

usually, as with any electronic

apparatus, have the ability to emit

and receive electromagnetic signals.

2. One of Philips’ leading Business

Principles is to take all necessary

health and safety precautions for

our products, to comply with all

applicable legal requirements and to

stay well within the EMF standards

applicable at the time of producing

the products.

3. Philips is committed to developing,

producing and marketing products

that cause no adverse health effects.

4. Philips confirms that if its products

are handled properly for their

intended use, they are safe to use

according to the scientific evidence

available today.

The RBRC seal

The RBRC^®Seal

on the nickel metal

hydride battery

indicates that

Philips Royal

Electronics is

voluntarily

participating in an industry program to

collect and recycle these batteries at the

end of their useful lives, when taken out

of service within the United States and

Canada.

The RBRC^®program provides a

convenient alternative to placing used

nickel metal hydride batteries into the

trash or municipal waste, which may be

illegal in your area.

Philips’ participation in RBRC^®makes it

easy for you to drop off the spent battery

at local retailers participating in the

RBRC^®program or at authorized Philips

product service centers.

5. Philips plays an active role in the

development of international EMF

and safety standards, enabling Philips

to anticipate further developments

in standardization for early

integration into its products.

Please call 1-800-8-BATTERY for

information on NiMH battery recycling

and disposal bans/restrictions in your

area. Philips’ involvement in this program

The RBRC^®seal

Download from Www.Somanuals.com. All Manuals Search And Download.

is part of its commitment to protecting

our environment and conserving natural

resources.

RBRC^®is a registered trademark of

Rechargeable Battery Recycling

Corporation.

3.1

Service Centers

US service center

Philips Accessories & Computer

Peripherals North America1881 Route

46 West Edgewood, NJ 07852

Phone: (800) 233-8413

E-mail support:

http://www.support.philips.com/support

The RBRC^®seal

Download from Www.Somanuals.com. All Manuals Search And Download.

The RBRC^®seal

Download from Www.Somanuals.com. All Manuals Search And Download.

Your phone

Congratulations on your purchase and welcome to Philips!

This manual only explains part of the functions of your handset. For details on other

functions, refer to the manual provided with the base station.

To fully benefit from the support that Philips offers, register your product at

www.philips.com/welcome.

4.1

What’s in the box

Handset with belt clip

Charger

Battery door

User manual

2 AAA rechargeable

batteries

Power supply

Guarantee

Do not return leaflet

Quick Start Guide

Your phone

Download from Www.Somanuals.com. All Manuals Search And Download.

4.2

Overview of your handset

Display

See section 4.3 for an overview of the

display icons.

Select key o

In a menu, selects the function displayed

on the screen or goes to the next lower

level. Also used to confirm entries (for

example, when setting date and time).

When used with the dual-line SE659 base

station, press to receive an incoming call

on Line 1, or to select Line 1 for making

an outgoing call.

Back/Clear key c

When making an entry, press to clear

(delete) a character or number, or long

press to clear all.

When navigating menus, press to move

to the previous higher menu level (Back

is displayed).

When used with the dual-line SE659 base

station, press to receive an incoming call

on Line 2, or to select Line 2 for making

an outgoing call.

Navigation keys n

In idle mode: Scroll up u to access the

Call log and scroll down d to access

the Phonebook.

During a call: Scroll n to increase or

decrease earpiece and speaker volume.

Editing and entry: Move to the previous

character u or next character d.

In other modes: Scroll up u and down

d a menu list or go to the previous

or next record in the Phonebook, Redial

list, or Call log.

Event LED

The event LED on your handset blinks

when there is a new message recorded

on your telephone answering machine. If

you have subscribed to Caller Line

Identification, the event LED also blinks

when there is a new call, or a new voice

mail message.

Talk key t

Earpiece

In idle mode: Make or answer an external

call or answer an incoming internal call.

When used with the dual-line SE659 base

Your phone

Download from Www.Somanuals.com. All Manuals Search And Download.

station, this key works with the default

line when making or answering external

calls.

During a call: Activate the flash function.

In other modes: Dial the selected

number in the Phonebook, Redial list, or

Call log. When used with the dual-line

SE659 base station, works with the

default line.

Hang-up/Exit key h

In idle mode: Long press (5 seconds) to

switch off the handset.

When the handset is switched off: Long

press (1 second) to switch it on.

During a call: Hang up a call.

In other modes: Press to return to idle

mode.

When using keys 3 to 9 with the

dual-line SE659 base station, a long press

invites you to select a line, then dials one

of your direct memory access numbers

via the selected line.

Menu key m

In idle mode: Go to the main menu.

Redial key r

Access the Redial list in idle mode.

Loudspeaker key l

*/Keypad lock & Format key *

In idle mode: Turn on the loudspeaker

and dial the number. Answer an incoming

call using handsfree mode. When used

with the dual-line SE659 base station,

works with the default line.

In idle mode: Long press to lock/ unlock

keypad.

Predialing or editing: Press to enter a “*”.

Off hook: Long press to temporarily

switch to tone (DTMF) dialing if using

pulse.

During a call: Toggle the loudspeaker on/

off.

During call log display: Toggles area code

and long distance display on/off.

Number keys

Use to dial numbers and write

characters.

Refer to the manual provided with the

base station for the functions of keys 1

and 2.

When using keys 3 to 9 with the

SE650/655/658 base station, a long press

dials one of your direct memory access

numbers.

#/Ringer on/off & Pause key #

In idle mode: Long press to turn the

ringer on/off.

Dialing or editing: Long press to insert a

pause (during predialing) and short press

to insert a “#”.

Editing: Short press to switch upper/

lower case.

Your phone

Download from Www.Somanuals.com. All Manuals Search And Download.

Headset jack

Battery door

When used with the SE650/655 base

station during call log display: Toggles

area code and long distance display on/

off.

Mute key s

When off hook: Deactivate/activate the

microphone.

Call transfer key & Intercom

key i

In idle mode: Initiate an internal call.

During a call: Short press to hold the line

and page another handset. Long press to

set up a conference between an external

call and two handsets.

Microphone

Belt clip

Loudspeaker (underneath the

belt clip)

Warning

Handsfree activation can suddenly

increase the volume of the earpiece to a

very high level. Make sure the handset is

not too close to your ear.

Your phone

Download from Www.Somanuals.com. All Manuals Search And Download.

4.3

Display icons and Messages

SE650/655/658

SE659

L1 L2

All base station models:

Indicates that the battery is fully

Steady on when the answering

machine is on. Blinks when

messages have been received by

the answering machine; blinks

rapidly when the answering

machine memory is full.

Indicates that the handset is

registered and within range of

the base station. Blinks when

the handset is out of range or is

searching for a base.

charged. This icon blinks during

charge and when the battery is

low.

When the Icon is empty the

battery is practically discharged.

Note

If Warning Batt flashes together

with a blinking battery icon,

batteries of the wrong type are

installed in the handset. Replace

with batteries of the correct type.

Blinks when there is an incoming

call. Steady On during a call.

If you subscribe to voice mail

service, blinks when there is

new voice mail.

Blinks when there are new and

missed calls in the call log

records.

Appears when the alarm clock

is activated. Blinks when the

alarm time comes.

Select/ Select appears when in menu

mode. Press the key directly

below to move to the next

menu level or to confirm a

selection.

OK appears to request

confirmation of an operation.

Press the key directly below to

confirm.

Indicates that more options are

available in a scroll list, or that

you can adjust the volume.

Appears when the loudspeaker

is activated.

Appears when the ringer is off.

Your phone

Download from Www.Somanuals.com. All Manuals Search And Download.

Back/ Back appears when in menu

Clear mode. Press the key directly

below to return to the previous

menu level.

L2 CALL

Steady ON when there is an

incoming call on Line 2 (appears

only in talk mode).

Clear appears when making an

entry. Press the key directly

below to clear (delete) a

character or number when

making an entry. Long press to

clear all.

Getting started

Be sure to charge the handset for at least

24 hours before using it for the first time.

SE659 base station only:

Appears when using Line 1.

5.1

Connect the charger

Place the charger near a power

outlet.

Connect the power cable to the

connector on the charger.

Appears when using Line 2.

Line 1 Selects Line 1.

Line 2 Selects Line 2.

L1 IN USE

Steady ON when another unit

is using Line 1 (appears only in

talk mode).

L1 HOLD

Steady ON when Line 1 is on

hold (appears only in talk

mode).

L1 CALL

Steady ON when there is an

incoming call on Line 1 (appears

only in talk mode).

L2 IN USE

Steady ON when another unit

is using Line 2 (appears only in

talk mode).

Connect the other end of the

power cable to the power outlet.

Warning

L2 HOLD

Steady ON when Line 2 is on

hold (appears only in talk

mode).

Power is applied when the power

adaptor is plugged into the charger and

connected to the power outlet. The only

Getting started

Download from Www.Somanuals.com. All Manuals Search And Download.

way to power down the charger is to

unplug the power adaptor from the

power outlet. Therefore, ensure that the

power outlet is easily accessible.

The power adaptor must be connected

correctly, as incorrect connection could

damage the unit.

When the battery level becomes low, the

low battery sensor warns you by blinking

the battery icon. If this occurs during a

conversation, an alert tone sounds to

inform you that the battery is low. If the

battery level becomes exceedingly low,

the phone automatically switches off

shortly after the icon starts blinking and

any function in progress will not be

saved.

5.2

Install the batteries

Warning

Always use the AAA rechargeable

batteries supplied with your handset. If

alkaline batteries are used instead of

rechargeable batteries, “Warning Batt”

will show on the display and the battery

icon will blink quickly.

Place the handset in the cradle of

the charger with the display facing

forward. A beep is emitted if the

handset is placed correctly.

The battery icon

on the display

blinks during charging.

The battery icon

Slide out the battery cover.

becomes

steady when the handset is fully

charged.

Note

Optimal battery life is reached after 3

cycles of complete charging (over 15

hours) and discharging, allowing

approximately 12 hours of talk-time and

150 hours of stand-by time.

Place the batteries in the correct

polarity as indicated and replace the

cover.

The indoor and outdoor ranges of the

handset are up to 50 meters and 300

meters, respectively. When the handset

moves beyond the operation range, the

antenna icon

will blink.

Tip

When you reach the range limit the

conversation may become crackly. Move

closer to the base.

5.3

Charge the batteries

Warning

5.4

Remove/Attach belt clip

A belt clip allows you to carry your

handset on your belt.

The handset must be charged for at least

24 hours before using it for the first time.

Getting started

Download from Www.Somanuals.com. All Manuals Search And Download.

To remove the belt clip, simply pull

the clip away from the handset.

To attach the belt clip to your

handset, fit the tabs on the belt clip

into the slots at the back of the

handset and push into place.

Registration

6.1

Registering the handset

You must register your handset to the

base station before you can use it. Up to

8 handsets can be registered to one base

station.

The PIN is required before you can

By default, the PIN is 0000.

5.5

Install optional headset

Your handset may be used with an

optional headset (not included in the

box). To use this feature, insert the

headset plug into the headset jack. Your

handset is ready for hands-free

conversations.

6.1.1 Easy registration

Insert the unregistered handset into

the base station to automatically

begin registration.

Registering… is displayed on the

screen.

•

Upon successful registration, a

validation tone is emitted and the

handset number (1 to 8) will be

assigned by the base

Diameter: 2.5 mm

automatically.

6.1.2 Manual registration

Power on the handset.

On the base station, press and hold

a for 3 seconds. A beep sounds to

indicate that the base station is

ready to accept registration. (No

beep sounds on the SE650.)

Note

If no action is taken on the handset

within 90 seconds, the registration

procedure will be aborted. If this

happens, repeat from Step 1.

Registration

Download from Www.Somanuals.com. All Manuals Search And Download.

On the handset, press m, scroll n

to Advanced Set and press o

Select.

Scroll n to Register and press

o Select.

Enter the PIN when prompted and

press o OK to confirm.

Registering… is displayed on the

screen.

When using the handset with the dual-

line SE659 base station:

Enter the number (maximum 24

digits) and then press t. The

default line is highlighted. If you

want to switch to the other line,

scroll n. Press t or o Select

(or press l in speaker mode) to

start the call on the highlighted line.

•

Upon successful registration, a

validation tone is emitted and the

handset number (1 to 8) is

assigned by the base station

automatically.

7.1.2 Direct dialing

Press t or l and then dial the

number.

When using the handset with the

dual-line SE659 base station, the call

will go out on the default line. (To

call from a particular line, press o

Line 1 or c Line 2 before

dialing.)

6.2

Checking the signal strength

When you power on the registered

handset, the display will show the word

“Searching” and the Antenna icon

flashes until the handset locks onto its

subscribed base. Then the display shows

the standby display.

7.2

Answer a call

When using the handset with the

SE650/655/658 base station, press

t or l when the phone rings.

When using the handset with the

dual-line SE659 base station,

and L1

and L1 CALL (or

Using the Handset

CALL) indicate the incoming call

line when the phone rings. To

answer, press the appropriate soft

key (o Line 1 or c Line 2).

7.1

Make a call

7.1.1 Predialing

7.3

End a call

When using the handset with the SE650/

655/658 base station:

To end a conversation, press h.

Enter the number (maximum 24

digits) and then press t or l.

Using the Handset

Download from Www.Somanuals.com. All Manuals Search And Download.

to answer on the base station when

using the SE658/659 base station).

Note

Using the Intercom

and Conference

Calling

Pressing h on any handset (or l on

the base station when using the SE658/

659 base station) will exit intercom

mode and return other units to idle

mode. If an external call arrives during

intercom mode and you want to accept

this call, you must first exit intercom

mode.

8.1

Using the Intercom

The intercom feature allows you to make

free internal calls, transfer external calls

from one handset to another and use the

conference option. With the SE658/

SE659, you can also make internal calls or

conference between the handset and the

base station.

8.1.2 Transfer an external call to

another unit

During the call, press i to put the

external call on hold (the caller can

no longer hear you).

•

The display shows the numbers

of the handsets registered to the

base (and the base as well, when

used with the SE658/659 base

station).

8.1.1 Intercom another unit

Press i in idle mode.

•

Intercom is established

immediately:

If there is only one handset

registered to the SE658/659 base

station;

If there are only two handsets

registered to the SE650/655 base

station.

Select n to the unit you wish to

transfer your external call to and

press o Select.

Press t on the called unit to

answer the internal call, where both

internal callers can talk.

If there is more than one (with the

SE658/659) or two (with the SE650/

655) registered handset(s), scroll n

to select the unit to call and press

o Select.

•

Intercom is established.

Press h on the first unit to

transfer the external call to the

called handset.

•

The external call is transferred.

•

Once the intercom call is

initiated the icon is displayed

on the handset.

Note

If there is no answer from the called unit,

press i to resume the external call.

Press t to answer an intercom

call on the called handset (or l

Using the Intercom and Conference Calling

Download from Www.Somanuals.com. All Manuals Search And Download.

8.1.3 Answer an external call

during intercom

8.2.1.1 Conferencing between

two internal units and an

external line

During intercom, a new call tone is

emitted when there is an incoming

external call.

During the call, press i to put the

external call on hold (the caller can

no longer hear you).

Press h to exit intercom mode.

When using the handset with the

SE650/655/658 base station, press

t to pick up the external call.

When using the handset with SE659

base station, press o Line 1 /

c Line 2 to pick up the external

call.

•

The display shows the numbers

of available handsets (and the

base station when used with the

SE658/659 base station).

Scroll n to the number of the unit

you wish to establish the conference

call with and press o Select.

Press t on the called handset (or

l if the base station is called

when using the SE658/659 base

station) to answer the internal call,

where both internal callers can talk.

8.1.4 Switch between an internal

and external call

During the call, press i to switch

between an internal or external call.

•

Intercom is established.

Press c Conf. soft key or long

press i on the first unit to start

the three party conference.

8.2

Conference calling

•

Conference will be displayed on

the screen once the conference

call is established.

8.2.1 Establish a three-party

conference call

Note

The conference call feature allows an

external call to be shared with two

handsets (when used with the SE650/

655/658/659 base station), one handset

If you use this handset with the SE659

base station, you can also conference

between two external calls and a handset

or the base station. For details, refer to

and the base (when used with the SE658/ the manual provided with the SE659 base

659 base station) or one handset and

another external call (when used with

the SE659 base station). The three

parties can share the conversation and

no network subscription is required.

station.

Using the Intercom and Conference Calling

Download from Www.Somanuals.com. All Manuals Search And Download.

To adjust ring volume:

Personal settings

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

9.1

Change the Handset Name

Scroll n to Handset Tones and

press o Select. Ring Volume is

highlighted. Press o Select.

When using the handset with the

SE650/655/658 base station, scroll

n to your desired volume level.

When using the handset with the

dual-line SE659 base station, first

scroll n to select Line 1 or Line 2

and press o Select. Then scroll

n to your desired volume.

You can name the handset and display the

handset name in idle mode. The default

handset name is Philips.

Press m in idle mode, scroll n to

Personal Set and press o

Select.

Handset Name is highlighted.

Press o Select.

The last stored name is displayed.

Press c Clear to delete the

characters one by one or a long

press to delete all.

•

The ring tone sounds at each

level.

Enter the new name and press o

OK to confirm.

Press o OK to confirm.

•

A validation tone is emitted and

the screen returns to the

Handset Tones menu.

•

A validation tone is emitted and

the screen returns to the

Personal Set menu.

Note

If ring volume is set to off, the

icon

will be displayed on the screen. If ring

volume is set to progressive, the ringer

will start at level 1 and go up one level

volume every ring.

9.2

Handset Tones

9.2.1 Set the Ring Volume

Danger

When the handset rings during an

incoming call, please do not hold the

handset too close to your ear as the

volume of the ringing tone may damage

your hearing.

9.2.2 Set the Ring Tones

There are 15 ring tones available on your

handset.

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

There are 5 ringer volume levels plus

progressive and off. The default is level 3.

Scroll n to Handset Tones and

press o Select. Then scroll n to

Ring Tones and press o Select.

Personal settings

Download from Www.Somanuals.com. All Manuals Search And Download.

When using the handset with the

SE650/655/658 base station, scroll

n to your desired melody.

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

When using the handset with the

SE659 base station, first scroll n to

select Line 1 or Line 2 and press

o Select. Then scroll n to your

desired melody.

Scroll n to Language and press

o Select.

Scroll n to your desired language

and press o Select to confirm.

•

A validation tone is emitted and

the screen returns to the

Personal Set menu.

•

The melodies will play as you

scroll them.

Press o Select to set the ring

Note

tone.

Once the display language is set, the

option menus on the handset will

immediately switch to display in the

selected language.

•

A validation tone is emitted and

the screen returns to the

Handset Tones menu.

9.2.3 Activate/Deactivate Key

Beep

A single beep tone is emitted when a key

is pressed. You can enable or disable the

key beep.

9.4

Select the Display Wallpaper

There are 3 wallpaper images available on

your handset as well as an option to set it

off.

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

Scroll n to Wallpaper and press

o Select.

Scroll n to your desired wallpaper.

The image on the display will change

as you scroll.

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

Scroll n to Handset Tones and

press o Select. Then scroll n to

Key Beep and press o Select.

Scroll n to select On or Off and

press o Select to confirm.

Press o Select to confirm.

•

A validation tone is emitted and

the screen returns to the

Handset Tones menu.

•

A validation tone is emitted and

the screen returns to the

Personal Set menu.

9.3

Change the Display Language

9.5

Select the Color Theme

Your handset can support different

display languages.

There are 4 color themes available on

your handset.

Personal settings

Download from Www.Somanuals.com. All Manuals Search And Download.

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

Scroll n to Color Theme and

press o Select.

Scroll n to your desired color

theme. The color theme used on

the display will change as you scroll.

Press o Select to confirm.

Scroll n to Backlight Time and

press o Select.

Scroll n to the desired backlight

time, and press o Select to

confirm.

•

A validation tone is emitted and

the screen returns to the

Personal Set menu.

•

A validation tone is emitted and

the screen returns to the

Personal Set menu.

9.8

Deactivate/Activate Auto

Hang-Up

If Auto Hang-up is set to On, it will

automatically release the line when the

phone is put back on the cradle.

If Auto Hang-up is set to Off, putting the

handset back on the cradle while in talk

mode will switch the handset to hands

free talk mode. This allows you to charge

the handset during calls.

9.6

Set the Display Contrast

You can change the contrast of the text

on the display. There are 5 contrast levels

available. The default is level 3.

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

Scroll n to Contrast and press

o Select.

Scroll n to the desired display

contrast, and press o Select to

confirm.

A validation tone is emitted and

the screen returns to the

Personal Set menu.

The default setting for Auto Hang-up is

On.

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

Scroll n to Auto Hang-up and

press o Select.

Scroll n to On or Off and press

o Select to confirm.

•

A validation tone is emitted and

the screen returns to the

Personal Set menu.

9.7

Set the Backlight Time

You can change the backlight timing for

the display. There are 3 options available:

20, 40, or 60 seconds.

Press m in idle mode, scroll n to

Personal Set, and press o

Select.

Personal settings

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Wideband synthesis for receiver and

loudspeaker

10 Advanced settings

Phonebook list, Redial list and Call

log

10.1 Registration

Please refer to section 6.1 on how to

•

Phonebook list with 200 entries

Redial list with 10 entries

Call log with 50 entries

Battery

10.2 Unregister

•

2 × AAA, 600mAh batteries

Press m in idle mode, scroll n to

Advanced Set and press o

Select.

Radio specifications

•

Frequency Band: 1920 - 1930Mhz

Maximum output power: 120mW

Scroll n to Unregister and press

o Select.

Enter the PIN when prompted and

press o OK to confirm.

Scroll n to select the handset

number to unregister and press o

Select. Press o Select again to

confirm.

Weight and dimensions

Handset:

•

128.5 grams

160mm × 28mm × 46mm

(H × D × W)

Charger:

•

A validation tone is emitted to

indicate successful unregistration.

•

77 grams

69mm × 96mm × 82mm

(H × D × W)

Temperature range

•

Operation: Between 0 and 35ºC

(32 to 95ºF).

11 Technical data

•

Storage: Between -20 and 70ºC

(-4 to 158ºF).

Display

•

Color LCD with backlight

Selectable wallpaper

Selectable color theme

Relative humidity

•

Operation: Up to 95% at 40°C

Storage: Up to 95% at 40°C

General telephone features

•

Caller name & number identification

5 standard + 10 polyphonic ringer

melodies

Advanced settings / Technical data

Download from Www.Somanuals.com. All Manuals Search And Download.

12 INDEX

Install the batteries 16

Activate/Deactivate Key Beep 22

Advanced settings 24

Answer a call 18

Intercom another unit 19

Answer an external call during

intercom 20

Make a call 18

Manual registration 17

Change the Display Language 22

Change the Handset Name 21

Charge the batteries 16

Checking the signal strength 18

Conference calling 20

Overview of your handset 11

Personal settings 21

Power requirements 6

Predialing 18

Conferencing between two internal units

and an external line 20

Connect the charger 15

Registering the handset 17

Registration 17

Deactivate/Activate Auto Hang-Up 23

Direct dialing 18

Remove/Attach belt clip 16

Display icons and Messages 14

Select the Color Theme 22

Select the Display Wallpaper 22

Set the Backlight Time 23

Set the Display Contrast 23

Easy registration 17

End a call 18

Establish a three-party conference call 20 Set the Ring Tones 21

Set the Ring Volume 21

Switch between an internal and external

call 20

Getting started 15

Handset Tones 21

Technical data 24

Transfer an external call to another

unit 19

Install optional headset 17

INDEX

Download from Www.Somanuals.com. All Manuals Search And Download.

Unregister 24

Using the Handset 18

Using the Intercom 19

What’s in the box 10

Your phone 10

UCZZ01111ZZ(0)

INDEX

Download from Www.Somanuals.com. All Manuals Search And Download.

Reproduction in whole or in part is prohibited without the

written consent of the copyright owner

Document order number: 3111 285 47111 (US-EN)

Download from Www.Somanuals.com. All Manuals Search And Download.

Philips Indoor Furnishings 220632 User Manual
Philips Network Card SLA5520 User Manual
Pioneer Cassette Player KEH P1010R User Manual
Planar Home Theater Screen Clarity LED3 User Manual
Polaroid Digital Camera izone300 User Manual
Polycom Server DOC2558B User Manual
Poulan Trimmer 530 082553 User Manual
Poulan Trimmer 530086413 User Manual
Prima Bread Maker ABM10 User Manual
ProForm Treadmill PFTL69711 User Manual