Philips Computer Monitor MCL1801 User Manual

MCL1801 FAMILY  
LCD 18” COLOR MONITOR  
User’s Manual  
m
e
nu  
Copyright © 2002 FIMI S.r.l. Saronno - Italy  
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner  
Printed in Italy  
(Rev. 1.1)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
The FIMI Medical Grade MCL1801 Medical is a color active matrix, liquid crystal display exclusively  
designed for medical applications.  
The monitor can be used for general medical viewing requiring high level color image quality, as well  
as in the Control Stations of Patient Monitoring, with a resolution of 1280 x 1024, and can accept an  
analogue signal input as well as a digital input.  
The product is engineered to meet all stringent medical safety requirements, including UL2601.1,  
CAN/CSA C22.2 No.601.1, EN-60601.1 and the product can be safely placed next to other sensitive  
equipment with no risk of harmful interference.  
Certications of monitor also cover requirements for liquid ingress and current-leakage from power  
supply.  
The other key features of the MCL1801 are:  
- long term luminance stability through an optional backlight stabilization circuit  
- luminace stability vs the viewing angle  
- contrast stability vs the viewing angle  
- brightness uniformity  
- automatic brightness control with backlight sensor and ambient light sensor  
- internal automatic greyscale calibration (10 bit L.U.T.)  
The tilt swivel base can be removed and the monitor uses a mounting plate that conforms to the  
VESA mounting standard, that allows exible mounting options, including wall mounting and rolling  
stands.  
User controls are available through On-Screen Display.  
MCL1801  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
TECHNICAL INFORMATION.............................................5  
DIMENSIONS..........................................................................6  
INSTALLATION.....................................................................8  
MOUNTING INSTRUCTION..............................................8  
CONNECTING INSTRUCTION...........................................9  
connecting AC power....................................................10  
connecting analog video...............................................11  
connecting digital video................................................11  
connecting the optional touchscreen.............................12  
INPUT INSTRUCTION.........................................................13  
CONTROL PANEL DESCRIPTION....................................14  
(OSD) ON SCREEN DISPLAY..............................................15  
menu structure..............................................................15  
OSD key functions.......................................................16  
OSD controls...............................................................16  
main menu................................................16  
information...............................................17  
image adjust..............................................17  
horizontal position....................................18  
vertical position........................................18  
scale / center.............................................18  
image Enhancement..................................18  
ABC selection...........................................18  
transfer function........................................19  
advanced...................................................19  
phase adjust..............................................20  
clock adjust...............................................20  
service.......................................................21  
auto-setup options.....................................21  
auto-setup on modest................................21  
auto-clock feature.....................................22  
auto-(Phase/Position)................................22  
auto-(Clock/Position)................................22  
auto-level .................................................22  
restore factory preset................................23  
language....................................................23  
OSD setting..............................................23  
OSD position............................................24  
(OSD) vertical position............................24  
OSD size..................................................25  
OSD transparency....................................25  
OSD timeout............................................25  
video source.............................................25  
keyboard option.......................................26  
MCL1801  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TECHNICAL INFORMATION  
Display Panel  
18.1” (460mm) SXGA active matrix monocrome TFT/LCD  
Supported Grayscale  
Dimensions  
8-bit  
Panel 410 x 362 x 105 mm. (width x height x depth.)  
7,7 Kg ( panel ), 3,7 Kg ( pedestal )  
359,0 x 287,2 mm ( width x height )  
40 mS ( 10% to 90% rising + 90% to 10% falling )  
± 85° typ. horizontal or vertical ( contrast ratio 15 )  
400 : 1 typ.  
Weight  
Active display area  
Response Time  
Viewing Angle  
Contrast Ratio  
White luminance  
Pixel Pitch  
200 cd/m2  
0,2805 (one triad) x 0,2805 mm ( width x height )  
Video interface  
Analog Input:  
Digital Input:  
DSUB-15 connection for Separate Sync Video Signal or  
SOG Video Signal.  
DVI-D connection for TMDS signal link standard  
version.  
Scanning Frequency  
Power Consumption  
Power Supply  
Max pixel clock 135MHz  
70 W  
From 90 to 264 Vac , 50 -60 Hz  
Operation Temperature  
Storage Temperature  
Humidity  
+10 to +45 °C  
-20 to +60 °C  
80% ( Maximum Wet-Bulb should be 39 °C and No condensation )  
Shock  
Half sine wave: 50G 11msec. ;X+/-, Y+/-, Z+/- (total 6 Directions), Each  
two time shock.  
MCL1801  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIMENSIONS  
410  
360  
197.78  
306.02  
MCL1801  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIMENSIONS  
205  
205  
100  
117  
MCL1801  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Before unpacking the monitor , prepare a suitable workspace. You need a stable and level surface near a  
grounded wall outlet in an area that is relatively free of glare from sunlight or other sources of bright light.  
The monitor is cooled by two internal fans. For best performance, do not block the cooling vents.  
NOTE: before istalling this monitor, please refer to the user’s guides of your computer  
and video adapter to make sure if these equipments require any change of setting.  
Positioninig  
WARNING:  
WHEN POSITIONING THIS EQUIPMENT, ENSURE THAT THE MAINS PLUG AND SOCKET ARE  
EASILY ACCESSIBLE  
While unpacking the monitor, inspect it and other package contents for shipping damage that  
could cause a re or shock hazard. immediately report any shipping damage to the carrier or  
transportation company, and contact customer service for assistance. keep all packing material  
in case you need to ship, store or return the monitor.  
After unpacking the monitor, make sure the following items are included:  
Monitor  
Mains cord set 1,8-meter (USA version)  
Mains cord set 1,8-meter (EU version)  
Signal cable 1,8-meter (DB15 / DB15)  
This user’s manual  
If you ordered the monitor with the resistive touchscreen option, the following items should  
also be included:  
User’s manual of touchscreen  
Touchscreen cable  
PEDESTAL (standard)  
With the built-in pedestal you can tilt the monitor for a most comfortable viewing angle as  
shown in gure 8a.  
5°  
15°  
g. 8a  
MCL1801  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
MOUNTING INSTRUCTION  
PEDESTAL STANDARD (OPTIONAL)  
I
O
g. 9a  
The pedestal must be xed at monitor with N° 6 screws M3x10 (included into the BOX) as shown in  
gure 9a.  
ARM VESA PLATE  
I
O
g. 9b  
An arm with VESA (100x100) interface must be xed at monitor with N° 4 screws M4x10 as shown in  
gure 9b.  
MCL1801  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING INSTRUCTION  
CONNECTING AC POWER  
Plug the receptacle and of the cord set into the AC power adapter, then plug the power connector of the adapter  
into the power port on the monitor.  
This power port is located on the back of the monitor (see g. 10a).  
MAINS SWITCH  
g.10a  
The power cord set can be xed to cabinet with proper cable clamp and screw (see g. 10b)  
I
O
g 10b  
Insert the plug end of the power cord into a grounded wall outlet. For added protection, use a surge protector  
between the AC adapter and the electrical wall outlet to prevent sudden current variations from reaching  
the monitor  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING ANALOG VIDEO (SXGA)  
With the power the computer and the monitor turned off, connect the supplied video cable from the monitor  
to the computer’s video port (see g. 11a)  
I
O
G
R
B
g. 11a  
Make sure the video cable connector is securely connected to the video port on your computer.  
Turn the monitor on rst, and then turn on the computer.  
CONNECTING DIGITAL VIDEO (DVI)  
With the power the computer and the monitor turned off, connect the supplied video cable from the monitor  
to the computer’s video port (see g. 11b)  
I
O
G
R
B
g. 11b  
MCL1801  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TOUCHSCREEN (OPTIONAL)  
If your monitor has this optional feature, connect the monitor’s RJ11-4 serial port to the computer’s 9-pin  
RS-232 serial port using the proper cable (see g. 12a)  
I
O
G
R
B
g. 12a  
NOTE: Follow the instructions included on the enclosed CD for installing the Touchscreen drivers on  
your system. Following driver software installation, calibrate your Touchscreen to the system following the  
procedure described on the enclosed CD.  
MCL1801  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INPUT INSTRUCTION  
g.13a  
RS232  
or  
VIDEO-INPUT  
XVGA  
DVI-INPUT  
AC INLET  
MAINS SOCKET  
TOUCHSCREEN  
AC INLET (Meet IEC 320/CEE 22 STANDARD)  
110/220Vdc  
RS232 / TOUCHSCREEN Connector (RJ11-4)  
Pin 1 : RS232 Rx  
Pin 2 : RS232 Tx  
Pin 3 : ENABLE (Only with touch screen)  
Pin 4 : GND  
Note: When the option touchscreen is used, the RS232 monitor control is not available.  
DVI INPUT Connector (Microcross™ DVI-D female connector)  
Pin 1 : D2_RX - (T.M.D.S.)  
Pin 2 : D2_RX + (T.M.D.S.)  
Pin 3 : GND (Data 2 shield)  
Pin 4 : N.C.  
Pin 13 : N.C.  
Pin 14 : +5V Power  
Pin 15 : GND  
Pin 16 : Hot Plug Detect  
Pin 17 : D0_RX - (T.M.D.S.)  
Pin 18 : D0_RX + (T.M.D.S.)  
Pin 19 : GND (Data 0 shield)  
Pin 20 : N.C.  
Pin 5 : N.C.  
Pin 6 : SCL (For DDC)  
Pin 7 : SDA (For DDC)  
Pin 8 : N.C.  
Pin 9 : D1_RX - (T.M.D.S.)  
Pin 10 : D1_RX + (T.M.D.S.)  
Pin 11 : GND (Data 1 shield)  
Pin 12 : N.C.  
Pin 21 : N.C.  
Pin 22 : GND (Clock shield)  
Pin 23 : CK_RX + (T.M.D.S.)  
Pin 24 : CK_RX - (T.M.D.S.)  
VIDEO INPUT XVGA Connection (DSUB15 female connector)  
Pin 1 : R-in  
Pin 2 : G-in  
Pin 3 : B-in  
Pin 4 : N.C.  
Pin 5 : N.C.  
Pin 6 : GND  
Pin 7 : GND  
Pin 8 : GND  
Pin 9 : N.C.  
Pin 10 : GND  
Pin 11 : N.C.  
Pin 12 : SDA (For DDC option)  
Pin 13 : H.S.-in  
Pin 14 : V.S.-in  
Pin 15 : SCL (For DDC option)  
MCL1801  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL PANEL DESCRIPTION  
On the front bottom side part of the unit the following controls are placed:  
- BRIGHTNESS ADJ-  
- BRIGHTNESS ADJ+  
- MENU SELECT - / BRIGHTNESS Recall to 200 Cd/m²  
- MENU SELECT +  
- ENTER (Store/Source-Select)  
Light sensor  
LED  
GREEN= 200 cd/m² / Power-on  
RED < 200 cd/m²  
me  
nu  
ORANGE= Stand-by  
g. 14a  
Power Switch  
menu  
Brightness  
Adjust -  
Enter  
Brightness  
Adjust +  
Menu select +  
Menu select -  
MCL1801  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(OSD) ON SCREEN DISPLAY  
MENU STRUCTURE  
MAIN MENU  
├─────  
INFORMATION  
├─────  
└─────  
CODE VERSION  
EXIT  
├─────  
IMAGE ADJUST  
├─────  
├─────  
HORIZONTAL POSITION  
VERTICAL POSITION  
├─────  
SCALE / CENTER ─────┐  
├─────  
FULL SCREEN  
├─────  
└─────  
MAINTAIN ASPECT RATIO  
CENTER  
├─────  
IMAGE ENHANCEMENT  
├─────  
ABC SELECTION  
├─────────────ABC OFF  
├─────────────ABC REDUCED  
└─────────────ABC FULL  
├─────  
TRANSFER FUNCTION  
├─────────────6500° K  
├─────────────7600° K  
├─────────────9300° K  
├─────────────DICOM  
└─────────────TG3  
└─────  
EXIT  
├─────  
ADVANCED  
───────┐  
├─────  
├─────  
├─────  
PHASE ADJUST  
CLOCK ADJUST  
SERVICE ─┐  
├─────────────OFFSET RED ADJUST  
├─────────────OFFSET GREEN ADJUST  
├─────────────OFFSET BLUE ADJUST  
├─────────────GAIN RED ADJUST  
├─────────────GAIN GREEN ADJUST  
├─────────────GAIN BLUE ADJUST  
├─────────────STORE VIDEO  
└─────────────EXIT  
├─────  
AUTO-SETUP OPTIONS  
├─────────────AUTO-SETUP ON MODESET  
├────────────── ENABLED  
├────────────── DISABLED  
└────────────── ONLY ONCE  
├─────────────AUTO-CLOCK FEATURE  
├────────────── ENABLED  
└────────────── DISABLED  
└─────────────EXIT  
├─────  
├─────  
├─────  
├─────  
└─────  
AUTO-(PHASE/POSITION)  
AUTO-(CLOCK/POSITION)  
AUTO-LEVEL  
RESTORE FACTORY PRESETS  
EXIT  
└─────  
EXIT  
├─────  
LANGUAGES  
├─────  
├─────  
├─────  
├─────  
└─────  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
├─────  
OSD SETTING  
├─────  
OSD POSITION ──────┐  
├─────  
HORIZONTAL POSITION  
VERTICAL POSITION  
EXIT  
├─────  
└─────  
├─────  
OSD SIZE  
────────┐  
├─────  
└─────  
NORMAL  
DOUBLE  
├─────  
OSD TRANSPARENCY  
├─────  
OSD TIMEOUT ──────┐  
├───── 10 Sec.  
├───── 20 Sec.  
├───── 30 Sec.  
├───── 45 Sec.  
├───── 60 Sec.  
├───── 90 Sec.  
├───── 120 Sec.  
└───── DISABLED  
└─────  
EXIT  
├─────  
VIDEO SOURCE  
├─────  
├─────  
├─────  
└─────  
DSUB-SOG (GREEN INPUT)  
DVI  
DSUB (HT. AND VT. SYNC.)  
EXIT  
├─────  
KEYBOARD OPTION  
├─────  
KEYBOARD UNLOCK  
KEYBOARD LOCK  
└─────  
└─────  
EXIT  
MCL1801  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD KEY FUNCTIONS  
Function  
Enter  
Key  
Description  
N
It activates the OSD MAIN MENU if this is not active, otherwise selects and  
executes a desired OSD Special Function.  
Adjust -  
Adjust +  
Menu -  
Menu +  
When main menu or sub-menu is active, it allows to move or scroll to the  
previous (upper) item or decrement the magnitude of the parameter.  
When main menu or sub-menu is active, it allows to move or scroll to the  
previous (down) item or increment the magnitude of the parameter.  
Pressing “Enter” key the MAIN MENU highlight selection is the rst Sub-menu item “Video Information”  
Pressing “Menu +” or “Menu -” key, the highlight selection of menu item moves downward/ upward  
Pressing “Enter” key, the current menu window disappears and is replaced by the new sub-menu windows.  
6.0.0 OSD (ON SCREEN DISPLAY) CONTROLS  
6.1.0 Main manu  
After the activation of OSD Main Menu appears the following window  
Information  
i
Image Adjust  
E
Languages  
OSD Settings  
Video Source  
Keyboard Option  
Exit  
1024 x 768 @ 60 Hz - DSUB  
Information  
Image Adjust  
Languages  
It shows the hardware and rmware status (operating hours and release number)  
To adjust the picture when it is not correct  
To select the correct language  
i
OSD Settings  
Video Source  
Keyboard Option  
Exit  
To adjust the OSD options (position, attribute activity delay)  
To select the correct video input source  
To select the keyboard status.  
To exit from “MAIN MENU” .  
MCL1801  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.2.0 Information  
1) Press Enter button when the Information is highlighted on Main menu.  
The Information window appears.  
MCL1801  
Ver CO.62-DO.62  
h00002  
Model  
Firmware Release  
Operating Hours  
Video timing number  
c1B  
3) To press Enter buttton to return to Main Menu.  
Information  
FIMI-Philips  
MCL1801  
Ver CO.62-DO.62 h00002 c1B  
Exit  
6.3.0 Image Adjust  
1) Press Enter button when the Image Adjust is highlighted on Main Menu.  
The Image Adjust window appears.  
Image Adjust  
Horizontal Position  
Vertical position  
Scale / Center  
Image Enhancement  
Advanced  
Exit  
6.3.1 Horizontal Position  
1) Press Enter button when the Horizontal Position is highlighted on Image Adjust.  
The Horizontal Position bar appears.  
Image Adjust  
Horizontal Position  
Vertical position  
Scale / Center  
Image Enhancement  
Advanced  
Exit  
2) Press Adjust + or Adjust - button to move the image to the left or right  
3) When the position is adjusted, press the Enter button to return to Image Adjust window  
4) To select Exit and press again Enter buttton to return to Main Menu or select Vertical Position.  
MCL1801  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.3.2 Vertical Position  
1) Press Enter button when the Vertical Position is highlighted on Image Adjust.  
The Vertical Position bar appears.  
Image Adjust  
Horizontal Position  
Vertical position  
Scale / Center  
Image Enhancement  
Advanced  
Exit  
2) Press Adjust + or Adjust - button to move the image to the up or down  
3) When the position is adjusted, press the Enter button to return to Image Adjust window  
4) To select Exit and press again Enter button to return to Main Menu or select Scale / Center  
6.3.3 Scale / Center  
1) Press Enter button when the Scale / Center is highlighted on Image Adjust.  
The Scale / Center window appears.  
Scale / Center  
Full Screen  
Maintain Aspect Ratio  
Center  
The ON SCREEN DISPLAY shows the three modes available.  
The default is Full Screen, but you can select Maintain Aspect Ratio or Center.  
2) Press the Adjust + or Adjust - button to change the video mode, the choosen mode is highlighted.  
3) Press the Enter button to conrm your selection and return to Image Adjust window  
6.3.4 Image Enhancement  
1) Press Enter button when the Image Enhancement is highlighted on Image Adjust.  
The Image Enhancement window appears.  
Image Enhancement  
ABC selection  
Transfer Function  
Exit  
2) Press the Menu + or Menu - button until the desired item is highlighted.  
MCL1801  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.3.5 ABC Selection  
1) Press Enter button when the ABC Selection is highlighted on Image Enhancement  
The ABC Selection window appears.  
ABC Selection  
ABC Off  
ABC Reduced  
ABC Full  
2) Press the Adjust + or Adjust - button until the desired item is highlighted.  
- ABC off  
Manual back light control regulated by panel button from 80 cd/m² to 200 cd/m²  
- ABC full  
Automatic control of back light, the back light is function of ambient light and follow a semilogaritmic  
courve from 80 cd/m² (at 1 lux) to 200 cd/m² (at 1000 lux).  
-ABC reduced  
The same as ABC full but with full scale of 140 cd/m² (at 1000 lux).  
3) Press the Enter button to conrm your selection and return to Image Enhancement window  
6.3.6 Transfer Function  
1) Press Enter button when the Transfer Functiopn is highlighted on Image Enhancement  
The Transfer Function window appears.  
Transfer Function  
6500° K  
7600° K  
9300° K  
DICOM  
TG3  
2) Press the Adjust + or Adjust - button until the desired item is highlighted.  
Five colour temperature preset modes:  
- 6500° K  
DTP  
- 7600° K  
Photo retouch  
- 9300° K  
CAD/CAM  
- DICOM  
The output curve follows the DICOM curve  
- TG3  
The output curve is the same as PMS standard monitor.  
3) Press the Enter button to conrm your selection and return to Image Enhancement window  
6.3.7 Advanced  
1) Press Enter button when the Adavanced is highlighted on Main Menu  
The Advanced window appears.  
MCL1801  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced  
Phase Adjust  
Clock Adjust  
Service  
Auto-Setup Options  
Auto-(Phase/Position)  
Auto-(Clock/Position)  
Auto-Level  
Restore Factory Presets  
Exit  
2) Press the Menu + or Menu - button until the desired source is highlighted.  
6.3.8 Phase Adjust  
1) Press Enter button when the Phase Adjust is highlighted on Advanced.  
The Phase Adjust bar appears.  
2) Press Adjust + or Adjust - button to adjust the quality image  
Note: It is necessary to use video pattern dedicated to obtain the best result  
3) When the position is adjusted, press the Enter button to return to Advanced window  
4) Select Exit and press again Enter button to return to Image Adjust or select Clock Adjust.  
Advanced  
Phase Adjust  
Clock Adjust  
Service  
Auto-Setup Options  
Auto-(Phase/Position)  
Auto-(Clock/Position)  
Auto-Level  
Restore Factory Presets  
Exit  
6.3.9 Clock Adjust  
1) Press Enter button when the Clock Adjust is highlighted on Advanced.  
The Clock Adjust bar appears.  
2) Press Adjust + or Adjust - button to adjust the quality image  
Note: It is necessary to use video pattern dedicated to abtain the best result  
3) When the position is adjusted, press the Enter buton to return to Advanced window  
4) To select Exit and press again Enter button to return to Image Adjust or select Service.  
Advanced  
Phase Adjust  
Clock Adjust  
Service  
Auto-Setup Options  
Auto-(Phase/Position)  
Auto-(Clock/Position)  
Auto-Level  
Restore Factory Presets  
Exit  
MCL1801  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.3.10 Service  
1) Press Enter button when the Service is highlighted on Advanced.  
The Service window appears.  
2) Press Menu + or Menu - button until the desired item is highlighted and press Enter.  
3) Press Adjust + or Adjust - button to adjust the quality image  
4) When the item is adjusted, press the Enter button to return to Service window  
5) Offest and Gain are items to use to calibrate the video signal (valid only for DSUB / DSUB/SOG video source).  
When the calibration is OK it is necessary to execute the store operation to preserve the new values.  
Press Enter buton when the Store Video is highlighted.  
6) Select Exit and press again Enter button to return to Advanced or select Auto-Setup Options.  
Service  
Offset Red Adjust  
Offset Green Adjust  
Offset Blue Adjust  
Gain Red Adjust  
Gain Green Adjus  
Gain Blue Adjust  
Store Video  
Exit  
16  
6.3.11 Auto-Setup Options  
1) Press Enter button when the Auto-Setup Options is highlighted on Advanced.  
The Auto-Setup Options window appears.  
2) Press Menu + or Menu - button to select automatic options.  
Auto-Setup Options and Auto-Clock feature dene the modality of Auto-Adjust of the video image when the video  
timing is recognized.  
3) Select Exit and press again Enter button to return to Advanced or select Auto-Level.  
Auto-Setup Options  
Auto-Setup On Modeset  
Auto-Clock Feature  
Exit  
6.3.12 Auto-Setup On Modest  
1) Press Enter button when the Auto-Setup On Modest is highlighted on Auto-Setup Options.  
The Auto-Setup On Modest window appears.  
2) Press Adjust + or Adjust - button until the desired item is highlighted  
3) Press the Enter button to conrm your selection and return to Auto-Setup Options window  
MCL1801  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto-Setup On Modest  
Enabled  
Disabled  
Only Once  
Enabled  
Every time the video timing changes  
Disabled  
Only Once  
Never  
Only the rst time that the video timing is recognized.  
6.3.13 Auto-Clock Feature  
1) Press Enter button when the Auto-Clock Feature is highlighted on Auto-Setup Options.  
The Auto-Clock Feature window appears.  
2) Press Adjust + or Adjust - button until the desired item is highlighted  
3) Press the Enter button to conrm your selection and return to Auto-Setup Options window  
Auto-Clock Feature  
Enabled  
Disabled  
Enabled  
Disabled  
Every time the video timing changes  
Never  
6.3.14 Auto-(Phase/Position)  
1) Press Enter button when the Auto-(Phase/Position) is highlighted on Advanced.  
To perform an automatic adjustmant of the video image.  
Valid only DSUB-SOG and DSUB video source.  
2) Select Exit and press again Enter button to return to Image Adjust or select Auto-(Clock/Position).  
6.3.15 Auto-(Clock/Position)  
1) Press Enter button when the Auto-(Clock/Position) is highlighted on Advanced.  
To perform an automatic adjustmant of the video image.  
Valid only DSUB-SOG and DSUB video source.  
2) Select Exit and press again Enter button to return to Image Adjust or select Auto-Level.  
6.3.16 Auto-Level  
1) Press Enter button when the Auto-Level is highlighted on Advanced.  
To perform an automatic calibration of the video signal.  
Valid only DSUB-SOG and DSUB video source.  
2) Select Exit and press again Enter button to return to Image Adjust.  
MCL1801  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.3.17 Restore Factory Preset  
1) Press Enter button when the Restore Factory Preset is highlighted on Advanced.  
To reload factory settings.  
2) Select Exit and press Enter button toreturn to Image Adjust.  
6.4.0 Languages  
1) Press Enter button when the Languages is highlighted on Main Menu.  
The Languages window appears.  
The ON SCREEN DISPLAY shows the ve languages available.  
The default is English, but you can select Français, Deustch, Español or Italiano.  
2) Press the Adjust + or Adjust - button until the desired item is highlighted.  
3) Press the Enter button to conrm your selection and return to Main Menu window  
Languages  
English  
Français  
Deustch  
Español  
Italiano  
6.5.0 OSD Settings  
1) Press Enter button when the OSD Settings is highlighted on Main Menu.  
The OSD Settings window appears.  
2) Press the Menu + or Menu - button until the desired item is highlighted.  
OSD Settings  
OSD Position  
OSD Size  
OSD Transparency  
OSD Timeout  
Exit  
6.5.1 OSD Position  
1) Press Enter button when the OSD Position is highlighted on OSD Settings.  
The OSD Positions window appears.  
2) Press the Menu + or Menu - button until the desired item is highlighted.  
OSD Position  
Horizontal Position  
Vertical position  
Exit  
MCL1801  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.5.2 OSD Horizontal Position  
1) Press Enter button when the Horizontal Position is highlighted on OSD Position.  
The Horizontal Position bar appears.  
OSD Position  
Horizontal Position  
Vertical position  
Exit  
2) Press Enter button and Adjust + or Adjust - button to move the OSD image to RIGHT or to the LEFT.  
3) When the position is adjusted, press the Enter button to return to OSD Position window  
4) Select Exit and press again Enter button to return to OSD Settings  
6.5.3 OSD Vertical Position  
1) Press Enter button when the Vertical Position is highlighted on OSD Position.  
The Vertical Position bar appears.  
OSD Position  
Horizontal Position  
Vertical position  
Exit  
2) Press Enter button and Adjust + or Adjust - button to move UP or DOWN the OSD image .  
3) When the position is adjusted, press the Enter button to return to OSD Position window  
4) Select Exit and press again Enter button to return to OSD Settings.  
6.5.4 OSD Size  
1) Press Enter button when the OSD Size is highlighted on OSD Settings.  
The OSD Size window appears.  
OSD Size  
Normal  
Double  
2) Press the Adjust + or Adjust - button until the desired item is highlighted.  
Normal Standard dimensions  
Double Double dimension  
3) Press the Enter button to conrm your selection and return to OSD Settings window  
MCL1801  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.5.5 OSD Transparency  
1) Press Enter button when the OSD Transparency is highlighted on OSD Settings.  
The OSD Transparency bar appears.  
OSD Settings  
OSD Position  
OSD Size  
OSD Transparency  
OSD Timeout  
Exit  
2) Press Enter button and Adjust + or Adjust - button to choose the degree of transparency of the OSD image  
3) When the position is adjusted, press the Enter button to return to OSD Settings window  
4) Select Exit and press again Enter button to return to OSD Main Menu.  
6.5.6 OSD Timeout  
1) Press Enter button when the OSD Timeout is highlight on OSD Settings.  
The OSD Timeout bar appears.  
OSD Timeout  
10 Sec.  
20 Sec.  
30 Sec.  
45 Sec.  
60 Sec.  
90 Sec.  
120 Sec.  
Disabled  
2) Press Enter button and Adjust + or Adjust - button to choose the time of activation of the OSD-Menu.  
3) Press the Enter button to conrm your selection and return to OSD Settings windows.  
6.6.0 Video Source  
The ON SCREEN DISPLAY shows the four sources available.  
The default is - DSUB (*) (D-sub input Video with separated syncr.).  
but you can select:  
- DSUB-SOG (D-sub input Video with Syncr. On Green)  
- DVI (Digital Video Input)  
1) Press Enter button when the Video Source is highlighted on Main menu.  
The Video Source window appears.  
2) Press the Adjust + or Adjust - button until the desired source is highlighted.  
3) Press the Enter button to conrm your selection and exit from OSD Main Menu.  
Video Source  
DSUB-SOG (Green Input)  
DVI  
DSUB (Ht. and Vt. Sync.)  
Exit  
(*) see next page  
MCL1801  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(*)  
Video Source  
If the Video Signal is not available a warning message will appear on the screen for about 5 sec.  
Check Input Signal  
(XXX)  
XXX= Current Video Source (DVI,DSUB,SOG)  
After about 5 sec. the monitor will go in Stand-By mode.  
The led colour will become orange.  
To change the Video Source when the Video Source is not available to follow the followings steps:  
- Wait the Warning Message.  
- Press contemporarily the brightness keys.  
- When the Warning message disappears  
- Release the brightness keys.  
- Execute the normal change of the Video Source. (see ref. 6.6.0)  
6.7.0 Keyboard Option  
1) Press Enter button when the Keyboard Option is highlight on Main Menu.  
The Keyboard Option bar appears.  
Keyboard Option  
Keyboard Unlock  
Keyboard Lock  
2) Press the Adjust + or Adjust - button until the desired item is highlighted..  
3) Press the Enter button to conrm your selection and return to Main Menu window  
REMARK:  
To select the Keyboard status “LOCK or UNLOCK”, use the Keyboard Option Menu.  
(The new status is stored in E2prom, the default status is UNLOCK).  
If the Keyboard Status is UNLOCK any key and any OSD function is available.  
If the Keyboard Status is LOCK:  
- (Brightness +), . (Brightness -) and Reference Setting Recall (200 Cd/m2) are always available.  
- Pressing OSD key, will appear the dialog of Fig. 26a  
The OSD menu will appear after having performed the follow correct keys sequence:  
Brightness -  
Brightness +  
Brightness +  
Menu -  
The dialog (Fig. 26a) will disappear any time a wrong key will be pressed.  
For every right key pressed a “plus” characters appears in dialog of Fig. 26a.  
KEYBOARD LOCK  
Fig.26a  
MCL1801  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTENTIONALLY LEFT BLANK  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3119 206 1407.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peg Perego Riding Toy ES 3030 User Manual
Philips Breast Pump SCF158 User Manual
Philips Fan 42PFL7803D User Manual
Philips MP3 Docking Station SBD6000 05 User Manual
Philips TV Receiver 34PW850H 37 User Manual
Pioneer Car Stereo System VSX 60 User Manual
Planet Technology Network Router VC 204 User Manual
Plantronics Headphones HL10 User Manual
Praktica Digital Camera D00450 User Manual
Precisionaire Air Cleaner Cell GT User Manual