Philips Car Speaker CSM1000 User Manual

Register your product and get support at  
CSM1000  
EN  
ES  
User manual  
3
13  
25  
37  
49  
Manual del usuario  
PT-BR Manual do Usuário  
RU  
Руководство пользователя  
=+ꢀ&1ꢁ
߀
൱Ҭꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
1 Important  
Safety  
2010 © Koninklijke Philips Electronics N.V. All  
rights reserved.  
Read and understand all instructions  
before you use the apparatus. If damage  
is caused by failure to follow instructions,  
the warranty does not apply.  
Specifications are subject to change without  
notice. Trademarks are the property of  
Koninklijke Philips Electronics N.V. or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
This unit is designed for negative ground  
(earth) 12 V DC operation only.  
Use only the supplied mounting hardware  
for a safe and secure installation.  
Do not connect any active speakers (with  
built-in amplifier) to the speaker terminals  
of the unit. Doing so may damage the  
active speakers.  
To ensure safe driving, adjust the volume  
to a safe and comfortable level.  
To avoid short circuit, do not expose the  
apparatus, remote control or remote  
control batteries to rain or water.  
Never expose the apparatus to direct  
sunlight, naked flames or heat.  
Clean the apparatus with soft, damp  
cloth. Never use substances such as  
alcohol, chemicals or household cleaners  
on the apparatus.  
Notice  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and  
old equipment.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Your car active  
subwoofer  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
Introduction  
With the active subwoofer, you can enjoy high-  
quality sound performance with powerful bass  
and beats.  
What’s in the box  
Check and identify the contents of your package:  
i
k
j
g Tap type screw (M6x8 mm) x 4  
h Washer x 4  
a Main unit  
b Mounting plates x 2  
c Power cable  
i Machine screw (Ø5x20 mm) x 4  
j Velcro straps x 2  
d Power control cable  
e Battery (+) cable  
f Speaker wire  
k Cushion x 4  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview of the main unit  
a
b
c
d
e f  
g
a PHASE  
Adjust the phase of subwoofer signal.  
b FREQUENCY  
Set LPF (low-pass-filter) frequency  
from 80Hz to 120Hz.  
c VOLUME  
Adjust volume from 0 to maximum  
level.  
d INPUT (Ch1, Ch2)  
To connect car audio with RCA cable.  
e POWER  
Light in blue when power is turned  
on.  
f PROTECTED  
Lights in red when the protector is  
activated.  
g POWER/HIGH LEVEL INPUT  
To connect power supply (+12V-  
DC power supply, ground wire, and  
remote control wire) and car audio  
with bare wires.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Installation  
Note  
Follow all mounting and wiring instructions.  
Mount the subwoofer in car  
You can mount the subwoofer either under a  
seat or on the rear tray.  
Note  
Make sure that the mounting location is safe  
for drilling and wiring, and it will not interfere  
with the mechanical and electrical components  
of the vehicle.  
Connect wires  
For under-seat installation, make sure that it  
does not obstruct seat mobility.  
Caution  
1 Place the subwoofer on the location for  
Ensure that all loose leads are insulated with  
electrical tape.  
installation.  
2 Mark the positions of the four screw  
holes.  
1 Connect the subwoofer to your car audio  
by:  
3 Drill the holes with driller of  
(option 1) connect to bare speaker  
wires from car audio.  
approximately 4mm in diameter.  
4 Mount the subwoofer with the supplied  
(option 2) connect to the car audio  
directly via an RCA cable.  
screws and brackets.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CSM1000  
Car audio  
Option 2  
Option 1  
Left speaker  
Right speaker  
Tip  
2 Make the power connection by:  
connect the ground wire from the  
car to the GND socket.  
If your car audio does not have remote output,  
connect the remote input terminal (REM) to  
the accessory power supply.  
connect the remote wire from the  
car audio to the REM socket.  
With this connection, you can turn  
on/off the subwoofer with the car  
audio.  
connect the power wire from the car  
battery to the +12V socket  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the protector  
indicator  
4 Use your active  
subwoofer  
The subwoofer has a built-in protection circuit  
to protect the transistors and speakers in  
following conditions:  
Note  
The subwoofer is overheated.  
A DC current is generated in the  
speakers.  
Before playing music, position all knobs at the  
minimum level.  
The battery voltage is over low or  
over high. Or  
The speaker terminals are short  
circuited.  
Adjust phase  
When the PROTECTED indicator  
lights up in red, the subwoofer shuts  
down automatically. In this case,  
please:  
The location of the subwoofer determines the  
overall quality of the music. Even you are seat at  
sweet spot, the bass effect you heard might not  
in-phase with the overall music signal, for the  
subwoofer created a phase difference. In this  
case, you can change the phase of bass signal to  
enhance overall bass response, as well as overall  
feeling of the music.  
1 Take out the disc or tape and turn off the  
car audio.  
2 Check the cause of the malfunction.  
3 If the subwoofer is overheated, let it cool  
down.  
1 Press down PHASE.  
» The bass signal is 180 degree out of  
phase with the original one.  
To resume original bass effect, press  
PHASE again to release the button.  
Adjust frequency  
You can change LPF (low-pass-filter) frequency  
from 80Hz to 120Hz.  
1 Rotate FREQUENCY to adjust  
frequency.  
Adjust volume  
You can change volume from minimum level (0)  
to maximum level.  
1 Rotate VOLUME.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Product  
information  
Note  
Product information is subject to change  
without prior notice.  
Speaker type  
Active subwoofer  
Maximum output power 550Watt  
Rated power  
85Watt  
Operating frequency  
Phase  
80Hz ~ 120Hz  
0°, 180°  
S/N ratio  
95dB  
(rated power: 4ohms)  
Sensitivity  
(1% distortion)  
100mV at RCA,  
1.8V at speaker  
level  
Operating voltage  
14.4V  
(10.5V ~ 16V)  
Dimensions (DxWxH) 240 x 350 x 80mm  
Weight (main unit)  
3.9 kg  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Troubleshooting  
To keep the warranty valid, never try to repair  
the system yourself.  
If you encounter problems when using this  
apparatus, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site (www.  
philips.com/welcome).When you contact  
Philips, ensure that the apparatus is nearby  
and the model number and serial number are  
available.  
The sound is too low.  
The volume is not set correctly (see  
“Adjust volume”).  
The sound is interrupted or stopped suddenly.  
The thermal protector is activated.  
Reduce the volume.  
The ventilation outlet is blocked. Remove  
any obstructions from the outlet.  
Alternate noise is heard.  
The power connecting wires are installed  
too close to the RCA pin cords.  
The ground wire is not securely  
connected to a metal point of the car.  
Negative speaker wires touch the car  
chassis.  
Sound is distorted.  
Make sure the speaker polarity is correct.  
Adjust phase.  
The protector indicator lights up in red.  
The subwoofer is overheated. Cool down  
the subwoofer.  
The unit becomes abnormally hot.  
Place the subwoofer in a well ventilated  
location.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2010 Koninklijke Philips Electronics N.V.  
All rights reserved.  
CSM1000_00_UM_V1.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentax Home Safety Product AF540FGZ User Manual
Philips Baby Monitor SCD520 00 User Manual
Philips CRT Television TP2576C User Manual
Philips Headphones SHE9703 User Manual
Philips TV Antenna BDL5520QL User Manual
Philips TV Cables SWA2521T User Manual
Planet Technology Switch VC 1602 User Manual
Polk Audio Stereo Amplifier PAD40004 User Manual
Powerware Power Supply FSS 0342J User Manual
ProForm Treadmill PFTL998064 User Manual