Philips Car Satellite TV System 32PFL6606M User Manual

Register your product and get support at  
32PFL6606M  
37PFL6606M  
40PFL6606M  
46PFL6606M  
55PFL6606M  
EN User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Get started  
TV tour  
Remote control  
To open or close the Find menu.  
In the Find menu, access the channel list.  
To adjust the volume.  
To open or close the Adjust menu.  
In the Adjust menu, access a range of  
frequently used settings.  
To switch TV channels.  
To open or close the Text menu.  
In the Text menu, access teletext for news  
and information.  
To open or close the Home menu.  
In the Home menu, access connected  
devices, picture and sound settings, and  
other useful features.  
To open or close the Options menu.  
Options menus offer convenient settings for  
TV channels or programmes.  
To open or close the Source menu.  
In the Source menu, access connected  
devices.  
To return to the previous menu page or to  
exit from a TV function.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press and hold to return to watching TV.  
Press to select the next TV tour.  
Connect devices  
To exit from menu or TV function.  
To select a red menu option, access Digital  
Interactive TV services*, or watch TV  
demonstration clips.  
*Available on certain models only.  
For the best picture and sound quality,  
connect a DVD, Blu-ray disc player, or game  
console through HDMI (TM).  
To watch a non EasyLink compliant device,  
add it to the Home menu.  
1. Press > [Add your devices].  
2. Follow the onscreen instructions.  
To select a green menu option or to access  
energy efficient settings.  
Note: If you are prompted to select the TV  
connection, select the connector that this  
device uses. See Connect your TV >  
Connect devices (Page 45) for information  
on connection.  
If an EasyLink or HDMI-Consumer Electronic  
Control (HDMI-CEC) compliant device is  
connected to the TV, it is automatically  
added to the Home menu when both  
devices are switched on.  
To select a yellow menu option or to access  
the electronic user manual.  
Read more about the remote control in Use  
your TV > Controls > Remote control  
To watch a connected device  
1. Press  
.
Alternatively, look at the index in Search  
2. Select the newly added device icon.  
for...  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can learn more on device connections in Connect your TV > Connect devices.  
High Definition TV  
Ambilight  
For high-definition (HD) picture quality,  
watch HD programmes.  
*Available on certain models only.  
Ambilight gives a more relaxed viewing  
experience. It automatically adjusts the  
colour and brightness of the light to match  
the TV picture.  
On standard-definition (SD) programmes,  
the picture quality is standard.  
You can watch HD video content in these  
ways and more:  
Read more in Use your TV > Ambilight  
a Blu-ray disc player, connected with an  
HDMI cable, playing a Blu-ray disc  
an upscaling DVD player, connected  
with an HDMI cable, playing a DVD  
disc  
Network  
an over-the-air HD broadcaster (DVB-  
T MPEG4)  
a digital HD receiver, connected with  
an HDMI cable, playing HD content  
from a cable or satellite operator  
an HD channel on your DVB-C  
network  
an HD game console (for example, X-  
Box 360 or PlayStation 3), connected  
with an HDMI cable, playing an HD  
game  
Connect your TV to your home network to  
play music, photos, and videos from a  
computer or other media server on the  
same network.  
Read more in Connect your TV >  
Computers and the Internet (Page 53).  
HD video clip  
To experience the stunning sharpness and  
picture quality of HD TV, watch the HD  
video clip from the Home menu.  
Net TV  
If your home network is connected to the  
Internet, you can connect your TV to Net  
TV. Net TV offers movies, pictures, music  
and much more.  
Read more in Use your TV > Browse Net  
Press > [Setup] > [Watch demos].  
Watch Demo is on the second page of the  
setup menu.  
For more information about the availability  
of HD channels in your country, contact  
your Philips dealer or visit  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multimedia Home Platform  
Available on certain models in Italy only.  
Never place the TV, remote control or  
batteries near naked flames or other  
heat sources, including direct sunlight.  
To prevent the spread of fire, keep  
candles or other flames away from the  
TV, remote control and batteries at all  
times.  
Multimedia Home Platform (MHP) is an  
interactive TV service provided by digital TV  
broadcasters. If your TV is connected to a  
home network with internet connection, you  
can experience true interactivity and  
respond directly to the interactive services  
on the MHP channel.  
Read more in Use your TV > Use  
Multimedia Home Platform (Page 24).  
Important  
Risk of short circuit or fire!  
Never expose the remote control or  
batteries to rain, water or excessive  
heat.  
Avoid force coming onto power plugs.  
Loose power plugs can cause arcing or  
fire.  
Safety  
Read and understand all instructions before  
you use your TV. If damage is caused by  
failure to follow instructions, the warranty  
does not apply.  
Risk of electric shock or fire!  
Risk of injury or damage to the TV!  
Never expose the TV to rain or water.  
Never place liquid containers, such as  
vases, near the TV. If liquids are spilt on  
or into the TV, disconnect the TV from  
the power outlet immediately. Contact  
Philips Consumer Care to have the TV  
checked before use.  
Two people are required to lift and  
carry a TV that weighs more than 25kg  
or 55lbs.  
When stand mounting the TV, use only  
the supplied stand. Secure the stand to  
the TV tightly. Place the TV on a flat,  
level surface that can support the  
combined weight of the TV and the  
stand.  
When the TV is swivelled, ensure that  
no strain is exerted on the power cord.  
Strain on the power cord can loosen  
connections and cause arcing.  
To disconnect the TV from the mains  
power, the power plug of the TV must  
be disconnected. When disconnecting  
the power, always pull the power plug,  
never the cord. Ensure that you have  
full access to the power plug, power  
cord and outlet socket at all times.  
Never insert objects into the ventilation  
slots or other openings on the TV.  
When wall mounting the TV, use only a  
wall mount that can support the weight  
of the TV. Secure the wall mount to a  
wall that can support the combined  
weight of the TV and wall mount. TP  
Vision Netherlands B.V. bears no  
responsibility for improper wall  
mounting that result in accident, injury  
or damage.  
If you need to store the TV,  
disassemble the stand from the TV.  
Never lay the TV on its back with the  
stand installed.  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before you connect the TV to the  
power outlet, ensure that the power  
voltage matches the value printed on  
the back of the TV. Never connect the  
TV to the power outlet if the voltage is  
different.  
Low temperatures  
If the TV is transported in temperatures  
below 5°C or 41°F, unpack the TV and  
wait until the TV temperature matches  
room temperature before connecting  
the TV to the power outlet.  
Parts of this product may be made of  
glass. Handle with care to avoid injury  
and damage.  
Screen care  
Risk of damage to the TV screen!  
Never touch, push, rub or strike the  
screen with any object.  
Risk of injury to children!  
Follow these precautions to prevent the TV  
from toppling over and causing injury to  
children:  
Unplug the TV before cleaning.  
Clean the TV and frame with a soft  
damp cloth. Never use substances such  
as alcohol, chemicals or household  
cleaners on the TV.  
Never place the TV on a surface  
covered by a cloth or other material  
that can be pulled away.  
Ensure that no part of the TV hangs  
over the edge of the surface.  
Never place the TV on tall furniture,  
such as a bookcase, without anchoring  
both the furniture and TV to the wall  
or a suitable support.  
To avoid deformations and colour  
fading, wipe off water drops as soon as  
possible.  
Avoid stationary images as much as  
possible. Stationary images are images  
that remain onscreen for extended  
periods of time. Stationary images  
include onscreen menus, black bars,  
time displays, etc. If you must use  
stationary images, reduce screen  
contrast and brightness to avoid screen  
damage.  
Educate children about the dangers of  
climbing on furniture to reach the TV.  
Risk of swallowing batteries!  
The product/remote control may  
contain a coin-type battery, which can  
be swallowed. Keep the battery out of  
reach of children at all times!  
Risk of overheating!  
Environmental efforts  
Never install the TV in a confined  
space. Always leave a space of at least 4  
inches or 10 cm around the TV for  
ventilation. Ensure that curtains or  
other objects never cover the  
Energy efficiency  
Philips continuously focuses on lowering the  
environmental impact of our innovative  
consumer products. We aim our efforts  
towards environmental improvements during  
manufacturing, reduction of harmful  
substances, energy-efficient use, end-of-life  
instructions and product recycling.  
ventilation slots on the TV.  
Risk of injury, fire or power cord damage!  
Never place the TV or any objects on  
the power cord.  
Disconnect the TV from the socket and  
aerial before lightning storms. During  
lightning storms, never touch any part  
of the TV, power cord or aerial cable.  
To access energy efficient settings:  
While you watch TV, press the green button  
on the remote control.  
Risk of hearing damage!  
These energy-efficient settings include:  
Avoid using earphones or headphones  
at high volumes or for prolonged  
periods of time.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Energy saving picture settings: You can  
When this crossed-out wheeled bin symbol  
is attached to a product it means that the  
product is covered by the European  
Directive 2002/96/EC. Please inform yourself  
about the local separate collection system  
for electrical and electronic products.  
apply a combination of energy saving  
picture settings. While you watch TV,  
press the green button and select  
[Energy saving].  
Power switch: You can completely cut  
off power to the TV with the power  
switch. It is located at the base of the  
set.  
Screen off: If you only want to listen to  
audio from the TV, you can turn off the  
TV display. Other functions continue to  
operate normally.  
Light sensor: The built-in ambient light  
sensor lowers the brightness of the TV  
screen when the surrounding light  
darkens.  
Please act according to your local rules and  
do not dispose of your old products with  
your normal household waste. Correct  
disposal of your old product helps to  
prevent potential negative consequences for  
the environment and human health.  
Low standby power: The advanced  
power circuitry brings down the power  
consumption of the TV to an extremely  
low level, without losing out on the  
constant standby functionality.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed of with normal  
household waste. Please inform yourself  
about the local rules on separate collection  
of batteries because correct disposal helps to  
prevent negative consequences for the  
environment and human health.  
Power management: The advanced  
power management of this TV ensures  
the most efficient use of its energy.  
To view how your personalised TV  
settings affect the TV's relative power  
consumption, press and select  
[Setup] > [Watch demos] > [Active  
Control].  
End of use  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
Position the TV  
Placement  
Before you position the TV, read all  
safety precautions. See Get Started >  
Important > Safety (Page 6).  
Position the TV where light does not  
shine directly on the screen.  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
For 32 inch to 46 inch TV:  
The ideal distance from which to watch  
TV is three times its diagonal screen  
size. For example, if the diagonal screen  
size of the TV is 116cm / 46", the ideal  
viewing distance is ~3.5m / ~138" from  
the front of the screen.  
While seated, your eyes should be level  
with the centre of the screen.  
Stand mount or wall mount  
To apply the best settings for your TV, select  
wall mount or stand mount.  
1. In the [Preferences] menu, select [TV  
placement].  
2. Select [On a TV stand] or [Wall  
mounted], then press OK.  
For 55 inch TV:  
Wall mount  
Warning: Follow all instructions provided  
with the TV mount. TP Vision Netherlands  
B.V. bears no responsibility for improper  
TV mounting that results in accident, injury  
or damage.  
Before you mount the TV:  
Purchase a Philips TV mount or a  
compatible TV mount.  
For certain models, remove the wall  
mount plugs from the back of the TV.  
To prevent damage to cables and  
connectors, leave a gap of at least 5.5  
cm or 2.2 inches from the back of the  
TV.  
Location  
A range of TV settings are applied to suit the  
location of the TV.  
Shop or home mode  
Set the TV location to Home mode to  
access all TV settings. In Shop mode, you can  
access only a few settings.  
Check your TV screen size and match it  
against the list for the type of wall  
mount to purchase:  
81 cm / 32 inches: 200mm x 200mm, M6  
94 cm / 37 inches: 200mm x 200mm, M6  
102 cm / 40 inches: 400mm x 400mm, M6  
117 cm / 46 inches: 400mm x 400mm, M6  
140 cm / 55 inches: 400mm x 400mm, M8  
1. While you watch TV, press  
2. Select [Setup] > [TV settings] >  
[Preferences].  
3. Select [Location] > [Home] or [Shop],  
then press OK.  
.
4. Restart the TV.  
Screw length  
Before you wall mount the TV, find the  
correct length of screw by adding the  
thickness of your wall mount to the screw  
length.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before you contact Philips, note down your  
TV model and serial number. You can find  
this information on the back of your TV or  
on its packaging.  
Lock the TV  
Your TV is equipped with a Kensington  
security slot at the base of the TV. Purchase  
a Kensington anti-theft lock (not supplied) to  
secure the TV.  
Help and support  
Use Help  
You can access onscreen [Help] from the  
Home menu by pressing the Yellow button.  
You can also switch between the [Help]  
menu and the TV menu by pressing the  
Yellow button.  
Online support  
If you can't find what you need in the  
onscreen [Help], consult our online support  
Follow the website instructions to select  
your language, then enter your product  
model number.  
At our support website, you can also:  
find answers to frequently asked  
questions  
download a printable PDF version of  
this user manual to read  
email us a specific question  
chat online with one of our support  
personnel (available in certain countries  
only)  
Contact Philips  
If you like, you can contact Philips Consumer  
Care in your country for support. You can  
find the contact number in the leaflet  
accompanying the TV.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indicators  
2 Use your TV  
Controls  
TV controls  
1. Ambient sensor / remote control sensor  
Ambient sensor is available on certain  
models only.  
Remote control  
1.  
+/-: Increase or decrease volume.  
2. AMBILIGHT: Switch Ambilight on or off.  
Ambilight is available on certain models only.  
3. (Home): Access the Home menu. Press  
again to launch an activity in the Home  
menu.  
4. CH +/-: Switch to the next or previous  
1. (Standby): Switch the TV on or to  
standby.  
channel.  
5. Power: Switch the TV on or off.  
2. Play buttons: Control video or music play.  
3. Colour buttons: Select tasks or options.  
The buttons function according to the  
services offered by the service provider.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. (Home): Access the Home menu.  
5. (Navigation buttons): Navigate  
Caution: The battery contains perchlorate  
material, handle it with care. For information,  
see  
through menus and select items.  
6. CH - / CH + (Previous/Next): Switch  
e.  
channels, navigate through menu pages,  
tracks, albums or folders.  
7.OK: Confirm an entry or selection.  
8. (Back): Return to the previous menu  
If your remote control signal is weak, replace  
the batteries:  
1. Open the battery cover.  
page.  
2. Remove the old batteries from the battery  
compartment, and replace them with fresh  
batteries.  
Make sure that the ends of the batteries line  
up correctly with the +/- markings in the  
battery compartment.  
Notes:  
Dispose of batteries according to  
environmental directives. Read Get started  
> Environmental efforts > End of use (Page  
Remove batteries from the remote control if  
you will not use it for an extended period of  
time.  
9. FIND: Access the menu to select TV  
channel list.  
10. ADJUST: Access the menu to adjust  
settings.  
11.  
12.  
SOURCE: Select connected devices.  
OPTIONS: Access options for the  
current activity or selection.  
The type of battery varies according to RC  
model:  
For remote control with AAA batteries (end  
to end):  
13. +/- (Volume): Adjust volume.  
14. (Mute): Mute or restore audio.  
15.0-9(Numeric buttons): Select channels.  
16. TEXT / INFO: Enable or disable teletext.  
Press and hold to view more information on  
the current activity.  
The INFO button is available on certain  
models only.  
17.EXIT: Exit from menus or TV functions.  
Batteries  
Warning: Risk of swallowing batteries!  
The product/remote control may contain a  
coin-type battery, which can be swallowed.  
Keep the battery out of reach of children at  
all times!  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Access EasyLink controls  
1. While you view content from a connected  
HDMI-CEC device, press  
For remote control with AAA batteries (side  
by side):  
OPTIONS.  
2. Select [Show device keys], then press  
OK.  
3. Select the EasyLink control button, then  
press OK.  
Read more on EasyLink in Use more of  
your TV > Use EasyLink (Page 33).  
Smartphone control  
Use your smartphone as a secondary  
remote, and even as a keyboard. You can  
also view a slideshow of the images in your  
smartphone on the TV. To download the  
application 'Philips My Remote', visit the  
Apple Apps store or the Android Market.  
Follow the instructions provided at the  
applications store.  
For remote control with CR2032 (3V)  
batteries:  
Ensure that your TV and smartphone are  
connected to the same local network. Read  
more about network connections in  
Connect your TV > Computers and the  
Internet (Page 53).  
Watch TV  
Switch TV on or off  
EasyLink controls  
Note: EasyLink controls are available when  
the connected device is HDMI-CEC  
compliant.  
EasyLink allows you to control your TV and  
other HDMI-CEC devices with one remote  
control.  
Switch the TV on  
Press the power switch at the base of  
the TV to the ON position.  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press  
+/- on the front of the TV.  
If the TV is in standby, press on the  
remote control.  
Note: There is a short delay before the TV  
responds.  
Tip: If you cannot find your remote control  
and want to switch on the TV from standby,  
press CH +/- on the front of the TV.  
Though your TV consumes very little energy  
in standby, it does use some energy. If you  
are not going to use the TV for an extended  
period of time, switch it off to cut off the  
power.  
Switch TV to standby  
Press on the remote control. The remote  
control sensor on the TV switches to red.  
Switch off the TV  
Press the power switch at the base of the  
TV to the OFF position.  
Mute or unmute the TV volume  
Press to mute the TV, or  
Press again to restore the volume.  
The TV no longer consumes energy.  
Automatic switch off  
Adjust headphone volume  
This TV is designed with energy efficiency  
settings. If there is no user interaction (such  
as pressing a remote control button or a  
control on the front panel) for four hours,  
the TV will automatically switch to standby.  
1. Press > [Setup] > [TV settings] >  
[Sound].  
2. Select [Headphones volume], then press  
OK.  
To disable automatic switch off,  
Switch TV channels  
While you watch TV, press the green button  
on the remote control. Select [Auto switch  
off] and press OK. An on screen message  
confirms that automatic switch off is  
disabled.  
Press  
on the remote control.  
Press CH +/- on the TV.  
Press the Numeric buttons to enter a  
channel number.  
Adjust TV volume  
Increase or decrease the TV volume  
Press +/- on the remote control.  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: TV programme guides are available in  
certain countries only.  
Manage channel lists  
You can view all channels or only your  
favourite channels in the channel list.  
Set programme guide  
Before you use the programme guide, check  
the following settings:  
While you watch TV, press FIND. The  
channel list is displayed.  
1. Press  
.
Create a channel list  
2. Select [Setup] > [TV settings] >  
[Preferences] > [Programme guide].  
3. Select [From the broadcaster] or [From  
network], then press OK.  
You can create a channel list that contains  
only your favourite channels.  
1. Press FIND.  
2. Select the channel and press  
OPTIONS.  
3. Select [Mark as favourite] or [Unmark as  
favourite], then press OK.  
Access the TV programme guide  
1. Press  
.
2. Select [Programme guide], then press  
OK.  
Note: If you are viewing the programme  
guide for the first time, follow the onscreen  
instructions when asked to update the guide.  
Select a channels list  
1. In the channel list, press  
2. Select [Select list] > [Favourites] to  
display channels in the favourite list; or [All]  
OPTIONS.  
Use TV programme guide options  
You can customise the displayed information  
to:  
to display all channels.  
3. Press OK to confirm.  
Remind you when programmes start  
Display only preferred channels  
View only analogue or digital TV channels  
You can use the channel list to access only  
analogue or digital channels.  
1. In the programme guide, press  
OPTIONS.  
2. Select one of these settings, then press  
OK:  
1. In the channel list, press  
OPTIONS.  
2. Select [Select list] > [Analogue] or  
[Digital], then press OK.  
[Set reminder]: Set programme  
reminders.  
Depending on your selection, only analogue  
or digital channels are available.  
[Clear reminder]: Clear programme  
reminders.  
Listen to digital radio  
If digital radio channels are available, they are  
installed automatically when you install the  
TV channels.  
[Change day]: Select the day to display.  
[More info]: Display programme  
information.  
1. While you watch TV, press FIND. The  
[Search by genre]: Search TV  
programmes by genre.  
[Scheduled reminders]: List  
programme reminders.  
[Update Programme guide]: Update  
channel list is displayed.  
2. Press  
OPTIONS.  
3. Select [Select list] > [Radio], then press  
OK.  
4. Select a radio channel, then press OK.  
the latest programme information.  
View programme guide  
Use smart picture settings  
The programme guide displays information  
about digital TV channels, for example:  
Select your preferred picture setting.  
1. While you watch TV, press ADJUST.  
2. Select [Smart picture].  
3. Select one of the following settings, then  
press OK:  
Channel schedules  
Synopsis of programmes  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
[Personal]: Apply your personalised  
picture settings.  
[Vivid]: Rich and dynamic settings, ideal  
for daytime viewing.  
[Natural]: Natural picture settings.  
[Auto zoom]: Enlarge the picture to fill  
the screen. Recommended for minimal  
screen distortion but not for HD or PC.  
[Super zoom]: Remove the black bars  
on the sides of 4:3 broadcasts. Not  
recommended for HD or PC.  
[Movie expand 16:9]: Scale 4:3 format  
to 16:9. Not recommended for HD or  
PC.  
[Wide screen]: Stretch 4:3 format to  
16:9.  
[Unscaled]: Provide maximum detail for  
PC. Only available when PC mode is  
enabled in the picture menu.  
[Cinema]: Ideal settings for movies.  
[Game]: Ideal settings for games.  
[Energy saving]: Settings that conserve  
the most energy.  
[Standard]: Default settings that suit  
most environments and types of video.  
[Photo]: Ideal settings for photos.  
[Custom]: Customise and store your  
own picture settings.  
Use smart sound settings  
Select your preferred sound setting.  
1. While you watch TV, press ADJUST.  
2. Select [Smart sound].  
Watch a connected device  
Add new device  
3. Select one of the following settings, then  
Notes:  
press OK:  
Before you watch a connected device,  
you must add its icon to the Home  
menu. See Connect your TV >  
Connect device (Page 45).  
[Personal]: Apply your preferred setting  
in the sound menu.  
[Standard]: Settings that suit most  
environments and types of audio.  
[News]: Ideal settings for spoken audio,  
such as the news.  
If you connect an HDMI-CEC  
compliant device to the TV through an  
HDMI connector and switch it on, the  
device is automatically added to the  
Home menu.  
[Movie]: Ideal settings for movies.  
[Game]: Ideal settings for games.  
[Drama]: Ideal settings for drama  
programs.  
1. Connect and switch on the device.  
2. Press  
3. Select [Add your devices], then press  
OK.  
.
[Sports]: Ideal settings for sports.  
4. Follow the onscreen instructions.  
Change picture format  
Change the picture format to suit your  
preference.  
1. Press ADJUST.  
2. Select [Picture format], then press OK.  
3. Select a picture format, then press OK to  
confirm.  
Select your device.  
Select the connector.  
Note: If you are prompted to select the TV  
connection, select the connector that this  
device uses.  
Select a source  
From Home menu  
The available picture formats depend on the  
video source:  
[Auto fill]: Adjust the picture to fill the  
screen (subtitles remain visible).  
Recommended for minimal screen  
distortion but not for HD or PC.  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After you have added the new device to the  
Home menu, select the new device icon to  
view its contents.  
Watch video  
Press the Navigation buttons to select a  
video file, then press OK.  
1. Press  
.
Press or to search forward or  
backward within a video.  
Press EXIT to exit the content  
browser.  
2. Select the device icon from the Home  
menu.  
3. Press OK to confirm.  
From Source menu  
While you play video, press  
to access the following video options:  
OPTIONS  
You can also press  
SOURCE to display a  
list of connector names. Select the  
connector that connects the device to the  
TV.  
[Show info]: Display the file  
information.  
[Stop]: Stop playback.  
1. Press  
SOURCE.  
[Repeat]: Repeat a video.  
[Shuffle on] / [Shuffle off]: Enable or  
disable random play of videos.  
2. Press the Navigation buttons to select a  
connector in the list.  
3. Press OK to confirm.  
Listen to music  
Press the Navigation buttons to select a  
music track, then press OK.  
Remove device  
You can remove device icons that are not in  
use.  
Press  
/
to search forward or  
backward within a track.  
Press EXIT to exit the content  
browser.  
1. Press  
.
2. Select the device icon from the Home  
menu.  
Press  
OPTIONS to access or exit the  
3. Press  
OPTIONS, then select [Remove  
following music options:  
this device].  
4. Select OK to confirm.  
[Stop]: Stop audio play.  
[Repeat]: Repeat a track or an album.  
[Play once]: Play the track once.  
[Shuffle on] / [Shuffle off]: Enable or  
disable random play of tracks.  
Play from USB  
If you have photos, videos or music files on a  
USB storage device, you can play the files on  
TV.  
View picture  
Press the Navigation buttons to select a  
picture, then press OK.  
Caution: TP Vision is not responsible if the  
USB storage device is not supported, nor is  
it responsible for damage or loss of data in  
the device.  
To pause or stop play, press OK.  
To skip to the previous or next file,  
press or  
.
Press EXIT to exit the content  
Do not overload the USB port. If you  
connect an HDD device that consumes  
more than 500mA power, make sure that it  
is connected to its own external power  
supply.  
browser.  
Press  
OPTIONS to access or exit the  
following picture options:  
[Show info]: Display the file  
information.  
[Stop]: Stop slideshow.  
[Rotate]: Rotate the file.  
[Repeat]: Repeat the slideshow.  
Access the USB content browser as follows:  
While you watch TV, connect the USB  
device to the USB connector on the  
TV.  
[Play once]: Play the file once.  
Press , select [Browse USB], then  
press OK.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can also press AMBILIGHT on the TV  
to switch Ambilight on or off.  
[Shuffle off] / [Shuffle on]: Enable or  
disable random display of pictures in  
the slideshow.  
[Slideshow speed]: Set the display time  
for each picture in the slideshow.  
[Slideshow transition]: Set the  
transition from one picture to the next.  
[Set as Scenea]: Set the selected  
picture as wallpaper on TV.  
Ambilight  
What you can do  
*Available on certain models only.  
Ambilight gives a more relaxed viewing  
experience. It automatically adjusts the  
colour and brightness of the light to match  
the TV picture.  
Change settings  
In the Ambilight menu, you can access more  
Ambilight settings.  
What you need  
1. While you watch TV, press > [Setup].  
2. Select [TV settings] > [Ambilight].  
3. Select a setting to adjust:  
For the best Ambilight effect, position  
the TV 25 cm away from the wall.  
Keep the remote control away from  
the TV, as it can interfere with the  
infrared signals.  
[Dynamic]: Adjust Ambilight between  
relaxed and dynamic levels. Available  
only if Ambilight [Colour] is set to  
[Dynamic].  
Dim the light in the room.  
[Brightness]: Adjust the brightness of  
Ambilight.  
[Colour]: Select a predefined colour.  
[Custom colour]: Set your own  
Ambilight colour. To access this option,  
set [Ambilight] > [Colour] >  
[Custom].  
[Separation]: Adjust the difference in  
colour levels on each side of the TV.  
Turn off this feature for a dynamic and  
uniform Ambilight colour.  
[TV switch off]: Select how Ambilight  
switches off when the TV is switched  
off.  
Switch on  
1. Press ADJUST.  
2. Select [Ambilight], then press OK.  
3. To switch Ambilight on or off, select [On]  
or [Off].  
[Lounge light mood]: Select a lounge  
light mode. The lounge light comes on  
when the TV is in standby.  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
[Scenea lounge light]: Switch Scenea  
lounge light on or off when Scenea is  
enabled.  
[Wall colour]: Select the colour of the  
wall behind the TV. Ambilight corrects  
its colours to suit the colour of the wall.  
Proceed to set up a media sharing server  
with Windows Media Player 11 or higher, or  
Twonky Media Server.  
Note: For help to use other media servers,  
such as TVersity, see the web site of the  
media server.  
If the apparatus does not return to DLNA  
mode due to external electrical disturbances  
(e.g. electrostatic discharge), user  
intervention is required.  
Use lounge light  
When the TV is in standby, press Ambilight  
on the front of the TV to create a lounge  
light effect in your room.  
Enable sharing on Windows Media  
Player 11  
Note: It may take more than 5 seconds for  
the lounge light to switch on.  
1. Start Windows Media Player on your  
computer.  
2. Select Library > Media Sharing.  
To select another lounge light colour, see  
Use your TV > Ambilight > Change  
settings.  
The first time you select Media Sharing,  
a pop-up screen appears. Tick the  
Share my media box and click OK.  
Browse PC through DLNA  
A device marked as Unknown Device  
appears in the Media Sharing screen.  
If the unknown device does not appear  
after a minute or so, make sure that  
your PC firewall is not blocking the  
connection.  
What you can do  
If you have photos, videos or music files  
stored on a computer connected through a  
home network, you can play the files on  
your TV.  
3. From the Media Sharing screen, select the  
unknown device and click Allow.  
A green tick appears next to the device.  
What you need  
A wired or wireless home network,  
connected with a Universal Plug and  
Play (uPnP) router.  
A Philips wireless USB adapter or a  
LAN cable that connects your TV to  
your home network.  
By default, Windows Media Player  
shares files from these folders: My  
Music, My Pictures, and My Videos.  
4. If your files are in other folders, select  
Library > Add to Library, and then follow  
the onscreen instructions to add the folders.  
A media server such as:  
PC running Windows Media Player 11  
If necessary, select Advanced options  
to display a list of monitored folders.  
or higher; or  
Mac running Twonky Media Server.  
5. Select Library > Apply Media Information  
Make sure that your computer firewall  
allows you to run the media server  
software program.  
Changes to activate the changes.  
You will also need to set up the network  
connection:  
Connect your TV and the computer to  
the same home network. See Connect  
your TV > Computers and the  
Internet (Page 53).  
Switch on your computer and the  
router.  
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Type a name for your media server, and  
Enable sharing on Windows Media  
Player 12  
1. Start Windows Media Player on your  
computer.  
2. In Windows Media Player, select the  
Stream tab, and then select Turn on media  
streaming.  
then click Save changes.  
5. Back in the Twonky Media screen, select  
Basic Setup > Sharing.  
6. Browse and select folders to share, and  
then select Save Changes.  
Your Macintosh rescans the folders  
automatically so that they are ready to share.  
The Media streaming options screen  
appears.  
Play files from computer  
3. Click Turn on media streaming.  
Return to the Windows Media Player screen.  
Note: Before you play multimedia content  
from the computer, make sure that the TV is  
connected to the home network, and the  
media server software is properly set up.  
4. Click Stream > More streaming options.  
The Media streaming options screen  
appears.  
1. Switch on the computer and the router.  
2. Switch on your TV.  
3. Press on the remote control.  
A media program appears in the local  
network screen. If the media  
programme does not appear, make  
sure that your PC firewall is not  
blocking the connection.  
4. Select [Browse PC], then press OK. If the  
network installation starts, follow the  
onscreen instructions.  
5. If the content browser is displayed, select  
a file, then press OK.  
5. Select the media programme and click  
Allowed.  
The file starts to play.  
A green arrow appears next to the  
media programme.  
By default, Windows Media Player  
shares files from these folders: My  
Music, My Pictures, and My Videos.  
6. Press the Play buttons on the remote  
control to control play.  
View pictures  
To play a picture slideshow, select a  
photo, then press OK.  
6. If your files are in other folders, select  
Organize tab and select Manage libraries >  
Music.  
Follow the onscreen instructions to add the  
folders that contain your media files.  
To pause or stop playback, press OK  
again.  
To play the previous or next file, press  
or  
.
Press  
following options:  
OPTIONS to access one of the  
Enable sharing on Twonky Media  
1. Visit www.twonkymedia.com to purchase  
the software, or download a free 30-day trial  
to your Macintosh.  
2. Start Twonky Media on the Macintosh.  
3. In the Twonky Media Server screen,  
select Basic Setup and First steps.  
The First steps screen appears.  
[Show info]: Display the file  
information.  
[Stop]: Stop slideshow.  
[Rotate]: Rotate the file.  
[Repeat]: Repeat the slideshow.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can lock Net TV Applications  
(Apps) with a 4 digit pin-code. All adult  
Apps can be locked as one selection.  
When you lock an adult Application,  
the advertisements and Web pages not  
adapted for Net TV remain accessible.  
Browse Net TV  
What you can do  
Enjoy Internet Applications (Apps), specially  
adapted internet websites for your TV. You  
can control the Apps with the TV remote  
control. For example, you can:  
Connect the TV to the Internet  
On your home network, connect the  
following:  
1. Connect a router with a high-speed  
connection to the Internet.  
2. Switch on the router.  
Read newspaper headlines  
Watch videos  
Check weather forecasts  
Use the catch-up TV feature to watch TV  
programmes that you missed. Availability of  
catch-up TV Apps differ for each country.  
To find out which TV programmes are  
available, access the Net TV programme  
guide.  
3. Install the network. See Connect the TV  
> Computers and the Internet (Page 53).  
Find out more on Net TV services at the  
Net TV forum website,  
Notes:  
Each country has different Net TV  
services.  
Certain websites may not display  
completely. Some functions are not  
available, for example file download, or  
functions that require plug-ins.  
Net TV services are updated  
automatically. To view the latest  
updates, change [All] to [New]in the  
[App Gallery].  
Net TV displays one page at a time, in  
full screen.  
Configure Net TV  
1. Press , select [Browse Net TV], and  
then press OK to confirm.  
The terms and conditions of use are  
displayed.  
2. To agree to the terms and conditions,  
press OK. The registration menu is  
displayed.  
3. To register with Club Philips, select  
[Register], then press OK.  
4. Confirm the onscreen message.  
TP Vision Netherlands B.V. bears no  
responsibility regarding the content and  
the quality of the content provided by  
the content service providers.  
A prompt asks if you want to lock adult  
services.  
5. To lock adult services, select [Lock], then  
press OK.  
6. Enter a 4-digit code, then press OK.  
7. Re-enter the 4-digit code, then press OK.  
The Net TV start page is displayed.  
What you need  
To enjoy Net TV, complete these tasks:  
1. On your home network, connect the TV  
to the Internet  
2. On your TV, configure Net TV.  
3. On your PC, register with Philips to enjoy  
exclusive benefits and receive updates on  
product information. You can register now  
or later.  
Access Net TV Applications (Apps)  
The first page shown is the Net TV home  
page. The icons on this page represent the  
applications (Apps).  
Notes:  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press  
OPTIONS and select [Show  
Browse Internet websites with the  
Internet Apps.  
Press the Navigation buttons to select  
an App, then press OK to confirm.  
remote control]. Use the onscreen keys to  
operate the connected audio or video  
player.  
Read the Net TV quick guide for more  
information.  
Access the App Gallery to add more  
Apps to your home screen.  
You can change country settings and  
select Apps from other countries.  
Select a key and press OK to carry out its  
function. Press  
to hide the onscreen keys.  
Select P+ and P- to scroll up and down on a  
web page.  
Zoom page  
To zoom in and out on an Internet page,  
Access website  
press  
OPTIONS and select [Zoom  
page]. Use the slider bar to set the  
enlargement.  
1. Select an Internet App, then press OK.  
2. Use the Numeric buttons on the TV  
remote control to enter a web address.  
To scroll through an Internet page, use the  
Navigation buttons to jump from highlight  
to highlight.  
To return to the Net TV home page, press  
FIND.  
Reload page  
Onscreen keyboard  
If a page does not load correctly, reload it.  
Select the area to enter the web address,  
then press OK.  
A keyboard appears on the screen.  
Use this to enter a web address.  
Press  
OPTIONS and select [Reload  
page].  
Security info  
To view security information about a page,  
Clear Net TV memory  
Warning: This option resets Net TV  
completely.  
press  
OPTIONS and select [Security  
info].  
You can clear the Net TV memory  
completely, including your favourites, the  
parental control code, passwords, cookies  
and history.  
Rent online video  
What you can do  
With this TV, you can rent a video from an  
online video store.  
1. Press  
.
2. Select [Setup] > [Network settings].  
3. Select [Clear Net TV memory], then  
press OK.  
1. Open a video store. You may need to  
register or enter your login.  
2. Select a video.  
3. Make the online payment.  
4. Download a video.  
Options  
Press  
OPTIONS to select the following:  
[Remove App]  
[Lock App]  
[Unlock App]  
[Move App]  
What you need  
To rent and download a video, you need a  
high-speed Internet connection to the TV.  
Read more about network connections in  
Connect your TV > Computers and the  
Internet (Page 53).  
Show remote control  
Keys such as play , rewind  
and fast  
forward  
can be called up with [Show  
remote control].  
You also need an SD memory card to insert  
into the TV SD card slot.  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SD memory size  
Rent  
View a video store  
1. Press  
2. Select [Browse Net TV] and press OK.  
3. Access the App Gallery to search for  
available video stores in your country.  
Use a blank SD memory card of type SDHC  
class 6, with at least 4 GB of storage  
capacity.  
.
For high-definition video, make sure that you  
use an SDHC card with at least 8 GB of  
storage capacity.  
4. Press the Navigation buttons to select a  
store, then press OK to confirm.  
The icon of the video store is added to the  
home page.  
5. To view a store, select its icon and press  
OK.  
Note: If the write speed is insufficient for  
video transfer, the TV rejects the SD card.  
Caution: This TV has a standard SD card slot  
that can be used only for renting video.  
Follow the instructions described here. If you  
insert the card incorrectly, you might damage  
the card. All existing content on the SD card  
is erased before you download rented  
videos.  
Rent a video  
To rent a video, select its icon on the video  
store page and press OK. In most cases you  
can rent a video for one day or for a couple  
of days or even just 1 hour. The way you  
select and rent a video varies from store to  
store.  
Payment  
The store prompts you to log in or to open  
a new account if you do not have one. The  
login might consist of your email address and  
a personal PIN code. When you are logged  
in, you can select the payment method, a  
credit card, or a value code in most cases.  
Consult the video store website for more  
information on its payment terms.  
To enter a number code (PIN), use the  
Numeric buttons on the remote  
control.  
To enter an email address, select the  
text field on the page and press OK.  
Select a character on the keyboard and  
press OK to enter.  
Format an SD card  
Before you download rented videos, your  
SD card must be formatted.  
1. Switch on the TV.  
Download the video  
2. As illustrated, insert the SD memory card  
into the SD card slot on the side of the TV.  
The TV automatically starts formatting the  
card.  
3. After formatting, leave the SD card in the  
slot.  
When you have paid, you can download the  
video on to the video memory. During the  
download, you can continue to watch a TV  
programme until the TV notifies you that the  
video is ready to play.  
If you cancel a download, you can still  
download the video until the rental period  
expires.  
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watch video  
1. Press , select [Browse Net TV].  
To find out what interactive services are  
available, contact your broadcasters.  
The installed video stores are displayed.  
2. Select the video store where you rented  
the video, then press OK.  
Access application  
1. Switch to a channel with digital TV  
interactive services.  
A blinking symbol is displayed when the  
application is loading. Once complete, an  
icon is displayed.  
3. With your log-in information, enter the  
online video store.  
4. Select the video from the list of  
downloaded videos, then press OK to play.  
2. Press the Red button to launch the  
interactive application.  
Use Multimedia Home  
Platform  
3. Follow the onscreen instructions to use  
the application.  
4. Press EXIT to exit.  
Note: If the MHP application does not load,  
enable MHP auto-start. See Use your TV >  
Use Multimedia Home Platform > Auto-  
start (Page 24).  
What you can do  
Available in Italy only  
Multimedia Home Platform (MHP) is an  
interactive TV service provided by digital TV  
broadcasters.  
Select application  
If the application you want to access does  
not load, the channel might have two or  
more MHP applications. Disable Auto-start  
and select the application you want to  
access.  
If your TV is connected to a home network  
(with Internet connection), you can  
experience true interactivity and respond  
directly to the MHP application.  
1. While you are watching the channel, press  
With MHP, you can view:  
OPTIONS.  
TV programme information  
Government services  
Weather forecasts  
2. Press Navigation buttons to select [MHP  
applications], then press OK.  
A menu is displayed.  
You can respond to MHP applications, for  
example:  
3. Select [Disable MHP auto start], then  
press OK.  
Auto-start is disabled, and the list of  
applications in the menu is enabled.  
4. Select an application, then press OK.  
Vote  
Shop online  
Request customised information  
Answer a quiz, contest or game  
Pay for a video-on-demand (VOD)  
programme  
The selected application starts to load.  
Auto-start  
If you switch to a channel with an MHP  
application, the interactive application starts  
automatically. You can disable or enable this  
automated behaviour.  
What you need  
To enjoy MHP interactive services, you need  
the following:  
digital channels with interactive services  
a wired or wireless home network,  
connected with a Universal Plug and  
Play router (uPnP).  
1. While you watch an MHP channel, press  
OPTIONS.  
2. select [MHP applications], then press OK.  
3. Select [Disable MHP auto start] or  
[Enable MHP auto start], then press OK.  
Auto-start is disabled or enabled.  
For network connection, see Setup your TV  
> Computers and the Internet (Page 53).  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Do not overload the USB port. If you  
connect a USB hard disk device that  
consumes more than 500 mA power,  
ensure that it is connected to its own  
external power supply.  
Once the USB hard disk device is  
formatted for this TV, you cannot use it  
on another TV or PC. Keep it  
3 Use more of  
your TV  
Pause TV  
connected permanently to the TV.  
What you can do  
1. Connect the USB hard disk to the USB  
connector on the side of the TV.  
2. Switch on the TV, and if necessary the  
hard disk, if it has an external power source.  
While watching a digital channel, you can  
pause a programme to answer an urgent  
phone call or to have a break. The broadcast  
is stored on a USB hard disk that is  
connected to the TV; you can replay the  
broadcast instantly.  
Note:  
The maximum time for which you can  
pause a TV broadcast is 90 minutes.  
What you need  
To pause a TV broadcast, do the following:  
Tune your TV to receive digital  
channels. Pause TV works only on  
digital TV channels. See Set up your TV  
> Channels > Automatic install (Page  
Connect a USB hard disk to the TV.  
Use a USB 2.0 compatible hard disk  
with a minimum hard disk space of 32  
gigabyte and a minimum transfer speed  
of 30 megabytes per second.  
3. Switch to a digital TV channel and press  
(pause) to start formatting.  
4. Follow the onscreen instructions.  
Warning:  
Hard disk installation  
The formatting process may take some time.  
Do not switch off the TV or disconnect the  
USB hard disk until this process is complete.  
Before you can pause a broadcast, you must  
connect a USB hard disk to the TV and  
format it.  
Caution:  
TP Vision is not responsible if the USB  
storage device is not supported, nor is  
it responsible for damage or loss of  
data in the device.  
Formatting removes all existing data on  
the hard disk.  
If you need extra USB connectors, use  
a USB hub. Do not connect any other  
USB device to the TV when you are  
formatting the hard disk.  
EN  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start a programme recording.  
Switch the TV to standby.  
Switch to another channel.  
Switch source to watch from a  
connected device - a Blu-ray disc player  
or digital receiver.  
Pause a live TV broadcast  
To change playback speed  
Press or repeatedly.  
To jump back to the beginning of the TV  
broadcast  
Press the left navigation button repeatedly  
until you reach the beginning of the  
broadcast storage.  
Record TV shows  
1. On a digital channel, press (pause) to  
pause a TV broadcast.  
2. Press (play) to continue watching.  
What you can do  
If your TV is connected to the Internet, you  
can record your favourite TV show or set a  
programmed recording of a digital broadcast  
onto a USB hard disk.  
The status bar shows the following time  
indicators:  
A. When the programme is paused for the  
first time.  
B. Where the paused programme is  
currently playing.  
C. Where the live programme is currently  
Start and manage the recordings from the  
electronic programme guide on the TV. See  
Use your TV > Watch TV > View  
Programme Guide (Page 15).  
playing.  
Note: In some countries, recording is not  
supported.  
Press  
(reverse) or  
(forward) to  
select where you want to start viewing  
the stored broadcast.  
Press (stop) to switch to live TV  
broadcast again.  
What you need  
To record TV programmes, do the following:  
Tune your TV to receive digital TV  
channels (DVB broadcast or similar).  
See Set up your TV > Channels >  
Automatic install (Page 38).  
Ensure your TV is connected to the  
Internet with a high-speed broadband  
connection. See Connect your TV >  
Computers and the Internet (Page 53).  
Connect a USB hard disk to the TV.  
Use a USB 2.0 compatible hard disk  
with a minimum hard disk space of 250  
gigabyte and a minimum transfer speed  
of 30 megabytes per second.  
Note: You cannot pause the TV broadcast  
when a recording is in progress.  
The stored broadcast on the USB hard disk  
is cleared if you do one of the following:  
Note: You can use the same hard disk for  
recording and pausing TV programmes.  
Disconnect the USB hard disk.  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: If you are using a USB hub, do not  
connect any other USB device to the TV  
when you are formatting the USB hard disk.  
To check if the programme guide supports  
recording:  
Press and select [Programme guide]. If  
you find a [TV Recording] button on the  
programme guide page, you can set up and  
manage recordings.  
If the [TV Recording] button is not present,  
ensure that the programme guide data is set  
to be updated through the network. Select  
> [Setup] > [TV settings] >  
[Preferences] > [Programme guide] >  
[From network].  
Hard disk installation  
Before you can record a TV programme,  
you must connect a USB hard disk to the TV  
and format it.  
Caution:  
TP Vision is not responsible if the USB  
storage device is not supported, nor is  
it responsible for damage or loss of  
data in the device.  
Formatting removes all data from the  
connected USB hard disk device.  
2. Switch on the TV and the hard disk, if it  
has an external power source.  
3. With the TV tuned to a digital TV channel,  
press (pause) to start formatting.  
4. Follow the onscreen instructions to  
complete the formatting process.  
The USB hard drive is formatted  
exclusively for this TV. Keep it  
Warning: The formatting process may take  
some time. Do not switch off the TV or  
disconnect the USB hard disk until this  
process is complete.  
permanently connected to the TV. You  
cannot use the stored recordings on  
another TV or PC. Do not copy or  
change the recording files on the USB  
hard disk through any PC application.  
This will corrupt your recordings.  
Do not overload the USB port. If you  
connect a USB hard disk device that  
consumes more than 500mA power,  
ensure that it is connected to its own  
external power supply.  
Start recording  
One touch recording  
To record the programme you are currently  
watching, if your TV remote control has a  
(record) button:  
1. Press (record). Recording starts  
immediately and you can adjust the end time  
of the recording in the pop-up window.  
2. Select [Schedule]and press OK to confirm  
the end time.  
1. Connect the USB hard disk to the USB  
connector on the side of the TV. If you need  
extra USB connectors, use a USB hub.  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set a timed recording  
To manually set a recording that is not linked  
to any programme:  
If your TV remote control does not have a  
button:  
1. Press and select [Programme guide].  
1. From the programme guide page, press  
OPTIONS, select [Manual record], and  
press OK.  
2. Set the channel, date and time span in the  
dialogue box.  
3. Select [Schedule] and press OK.  
2. With the current TV programme selected,  
press  
OPTIONS and select [Record].  
The TV sets the end time of the recording  
to the end of the programme.  
3. Select [Schedule]and press OK to start  
recording.  
Programme information  
To stop recording immediately, press  
(stop).  
To view more information on a programme,  
select the programme from the programme  
guide and press OK. Depending on the  
Notes:  
While recording, you cannot switch TV  
channels.  
While recording, you cannot pause the  
TV broadcast.  
status of this programme, you can start  
watching it, schedule its recording, play back  
the recording, or delete the recording from  
this page.  
Schedule a recording  
Manage recordings  
List of recordings  
To view the list of recordings and scheduled  
recordings, select the [TV Recording]  
button at the top of the programme guide  
and press OK.  
You can schedule a recording of an  
upcoming programme for today or a few  
days from today (maximum of 8 days away).  
1. To schedule a recording, press and  
select [Programme guide]. On the  
programme guide page, select the channel  
and programme that you wish to record.  
Note: The [TV Recording] button changes  
to [{0} Recordings]after the TV recordings  
are made. The number in front of the  
button indicates how many recordings have  
been made.  
Press the right or left navigation buttons  
to scroll through programmes. You can  
also enter the channel number to select  
the channel in the list.  
At this page, you can:  
To change the date, select the date at  
the top of the page and press OK.  
select a recording to watch,  
delete a recording,  
schedule a timed recording not linked  
to a specific TV programme,  
cancel a scheduled recording, or  
check the remaining hard disk space.  
Select the date you want and press  
OK.  
2. Select the programme, press  
OPTIONS, and select [Record].  
3. If needed, adjust the recording time to  
add a buffer at the end of the programme.  
Select [Schedule] and press OK. The  
programme is scheduled for recording.  
Watch a recording  
Select a recording from the recording list  
and press OK. The playback of the recording  
starts.  
A warning displays automatically when  
overlapping recordings are scheduled.  
You can use the (play),  
(forward),  
(rewind), (pause) or (stop) keys on the  
remote control to control play.  
Delete a recording  
If you plan to record a programme during  
your absence, remember to switch the TV  
to standby and keep the USB hard disk  
switched on.  
To delete an existing recording:  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Select the recording in the list and press  
OPTIONS.  
2. Select [Delete recording] and press OK.  
Access HbbTV  
When you tune to a TV channel that offers  
HbbTV, the interactive pages will open  
automatically or, at some point, you will be  
invited to open them.  
Cancel a scheduled recording  
To cancel a scheduled recording:  
Depending on the broadcaster, you might  
need to press the red button or OK on the  
1. Select the recording and press  
OPTIONS.  
2. Select [Cancel recording] and press OK.  
remote control to access the page.  
Expired recordings  
To exit the HbbTV pages, select the relevant  
button on screen and press OK.  
Broadcasters can limit the number of days a  
recording can be viewed after airing or  
restrict playback. A recording in the list can  
show the number of days before it expires.  
An expired recording can no longer be  
played.  
Navigate HbbTV pages  
To navigate the HbbTV pages, you can use  
the navigation buttons, colour buttons,  
number buttons, and the  
(back) button.  
While you watch videos within HbbTV  
pages, you can use (play), (pause) and  
(stop) buttons.  
Failed recordings  
If a scheduled recording is prevented by the  
broadcaster or if the recording does not  
occur as per schedule, it is marked as  
[Failed]in the recordings list.  
Enjoy HbbTV  
What you can do  
Some broadcasters of digital channels offer  
interactive HbbTV (Hybrid Broadcast  
Broadband TV).  
HbbTV text  
Some broadcasters offer HbbTV Text, a  
new version of Text. Depending on the  
broadcaster, you might need an Internet  
connection to view HbbTV Text.  
With HbbTV, broadcasters combine their  
normal TV programme with all kinds of  
information or entertainment. You can  
browse this information interactively. You  
can respond to a programme or vote, do  
online shopping or pay for a video-on-  
demand programme.  
You can use the same remote control  
buttons to navigate HbbTV Text as you did  
to navigate HbbTV pages.  
Block HbbTV  
To block HbbTV from a specific channel  
To fully enjoy HbbTV, you need to connect  
your TV to the Internet. Read more about  
connecting the TV to the Internet in  
Connect your TV > Computers and the  
Internet (Page 53).  
1.Press  
OPTIONS.  
2. Select [HbbTV on this channel] > [Off].  
To block HbbTV on all channels  
Note: You cannot download files to your TV  
1. Press (Home) and select [Setup].  
2. Select [TV settings]TV settings >  
[Preferences] > [HbbTV] > [Off].  
with this feature.  
EN  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Press  
.
View Teletext  
2. Select [Setup] > [Channel settings] or  
[Satellite settings].  
3. Select [Languages] > [Primary Text] or  
[Secondary Text].  
4. Select your preferred teletext languages,  
then press OK.  
Select a page  
1. Select a channel that has teletext feature,  
then press TEXT.  
2. Select a page in one of the following ways:  
Enter the page number with the  
Subpages  
A teletext page can contain several  
subpages. These subpages are shown on a  
bar next to the main page number.  
Numeric buttons.  
Press  
or  
to view the next or  
previous page.  
Press the Colour buttons to select a  
colour coded item.  
If subpages are available on a teletext page,  
press or to select them.  
3. Press EXIT to exit.  
Search  
Teletext options  
1. When you view teletext, press  
OPTIONS.  
1. When you view teletext, press OK to  
highlight the first word or number.  
2. Press the Navigation buttons to skip to  
2. Select one of the following options:  
the word or number to search.  
[Freeze page] / [Unfreeze page]:  
Freeze or unfreeze the current page.  
[Dual screen] / [Full screen]: Enable or  
disable dual screen teletext. Dual  
screen splits the current channel or  
source to the left of the screen, with  
teletext on the right.  
3. Press OK to begin the search.  
4. Press until no word or number is  
highlighted to exit the search.  
Digital teletext  
Some digital TV broadcasters offer dedicated  
digital text or interactive services on their  
digital TV channels, for example, BBC1.  
[T.O.P. overview]: Table Of Pages  
(T.O.P.) teletext broadcasts allow you  
to jump from one subject to another  
without using page numbers.  
When in digital teletext:  
Press the Navigation buttons to select  
[Enlarge] / [Normal view]: Zoom in on  
the page. Press the Navigation buttons  
to move around the enlarged view.  
[Reveal]: Hide or reveal hidden  
information on a page, such as solutions  
to riddles or puzzles.  
[Cycle subpages]: If subpages are  
available, each is shown automatically.  
[Language]: Switch to a different  
language group to display different  
character sets correctly.  
or highlight items.  
Press the Colour buttons to select an  
option, then press OK to confirm or  
activate.  
Note: Digital text services are blocked when  
subtitles are broadcast and enabled on the  
TV. Read Use more of your TV > View  
subtitles (Page 32).  
Teletext 2.5  
Teletext 2.5 offers more colours and better  
graphics than normal teletext. If Teletext 2.5  
is broadcast by a channel, it is switched on  
by default.  
3. Press  
OPTIONS to exit.  
Teletext language  
Some digital TV broadcasters provide several  
teletext languages. You can set your primary  
and secondary language.  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To switch Teletext 2.5 on or off  
1. Press  
2. Select [Setup] > [TV settings] >  
[Preferences].  
1. In the [Clock] menu, select [Date] or  
[Time], then press OK.  
2. Use the Navigation buttons to make your  
selection.  
3. Select [Done], then press OK.  
.
3. Select [Text 2.5] > [On] or [Off], then  
press OK.  
Sleeptimer  
Sleeptimer switches the TV to standby after  
a specified time. You can switch off your TV  
earlier or reset the sleeptimer during the  
countdown.  
Set locks and timers  
Clock  
1. Press  
.
You can display a clock on the TV screen.  
The clock displays the time that is broadcast  
by your TV service operator.  
2. Select [Setup] > [TV settings] >  
[Preferences] > [Sleeptimer].  
3. Press the Navigation buttons to set the  
sleeptimer.  
The sleeptimer can be set up to 180  
minutes, in steps of five minutes. The  
sleeptimer is switched off if it is set to zero  
minutes.  
Display the TV clock  
1. While you watch TV, press  
2. Select [Status], then press OK.  
The clock is displayed on the lower right  
hand corner of the TV screen.  
OPTIONS.  
4. Press OK to activate the sleep timer. The  
TV switches to standby after the specified  
time.  
Change the clock mode  
The clock mode is automatically  
synchronised to the Coordinated Universal  
Time (UTC). If your TV cannot receive UTC  
transmissions, change the clock mode to  
[Manual].  
Child lock  
To protect children from unsuitable TV  
programmes, you can lock the TV or block  
age rated programmes.  
1. While you watch TV, press  
2. Select [Setup] > [TV settings] >  
[Preferences].  
.
Set or change the child lock code  
3. Select [Clock] > [Auto clock mode].  
4. Select [Automatic], [Manual] or [Country  
dependent], then press OK.  
1. Press  
.
2. Select [Setup] > [Channel settings] >  
[Child lock].  
3. Select [Set code], or [Change code].  
4. Enter the code with the Numeric  
buttons.  
Enable or disable daylight saving  
If clock mode is set to [Country  
dependent], you can enable or disable  
daylight saving for your time zone.  
Tip: If you forget your code, enter '8888' to  
override any existing codes.  
1. In the [Clock] menu, select [Daylight  
saving] > [Daylight saving time] or  
[Standard time], then press OK. Daylight  
saving is enabled or disabled.  
Set the clock manually  
If clock mode is set to [Manual], set the date  
Lock or unlock channels  
1. In the child lock menu, select [Channel  
lock].  
2. Enter the child lock code with the  
Numeric buttons. The [Channel lock] menu  
appears.  
and time manually.  
3. Select channels to lock or unlock.  
EN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Parental rating  
Subtitle language  
Some digital broadcasters rate their  
You can change the subtitle language on  
some digital channels.  
programmes according to age. You can set  
your TV to display only programmes with  
age ratings lower than your child's age.  
1. Press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Subtitle language].  
3. Select [Primary subtitles] or [Secondary  
subtitles] for the preferred language.  
4. Press OK to confirm.  
1. Press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings].  
3. Select [Child lock] > [Parental rating].  
A message prompts you to enter the child  
lock code.  
Tip: You can also press  
OPTIONS >  
[Subtitle language].  
4. Enter the child lock code with the  
Numeric buttons.  
5. Select an age rating, then press OK.  
View Scenea  
All programmes above the selected age  
rating are blocked.  
What you can do  
You can display a default picture as the  
wallpaper on your TV. You can also load  
another picture as the wallpaper.  
For information on child lock codes, see Use  
more of your TV > Set locks and timers >  
Child lock (Page 31).  
If the sleeptimer is off, the wallpaper is  
displayed for 240 minutes. Otherwise, it is  
displayed for the duration of the sleeptimer.  
View subtitles  
What you need  
Analogue channels  
To use another picture as the wallpaper, you  
need a USB storage device that contains a  
picture that is less than 1 MB in size.  
1. Switch the TV to an analogue TV channel.  
2. Press TEXT.  
3. Enter the three-digit page number of the  
subtitles page (usually '888').  
4. Press EXIT to exit teletext.  
Switch on  
1. Press  
.
Subtitles display if available.  
2. Select [Scenea], then press OK.  
Digital channels  
The default picture is displayed.  
1. Press  
OPTIONS.  
Note: The wallpaper is displayed for the  
duration of the sleeptimer. For more  
information on sleeptimer, see Use more of  
your TV > Set locks and timers >  
Sleeptimer (Page 31).  
2. Select [Subtitles], then press OK.  
3. Select [Subtitles off], [Subtitles on] or  
[On during mute], then press OK.  
Note:  
If MHEG application is activated,  
subtitles are not displayed.  
Set TV wallpaper  
If you select [On during mute],  
subtitles are displayed only when you  
press to mute the sound.  
You can load another picture as the  
wallpaper.  
Note: Loading a new picture overrides the  
existing picture.  
EN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1. Connect the USB storage device to the  
TV.  
System audio control  
If you connect an HDMI-CEC compliant  
device that includes speakers, you can  
choose to hear the TV from those speakers  
instead of the TV speakers.  
2. Press  
.
3. Select [Browse USB], then press OK.  
4. Select a picture, then press  
OPTIONS.  
5. Select [Set as Scenea], then press OK.  
6. Select [Yes], then press OK.  
7. Press any button to exit Scenea.  
For more information about TV audio  
output, see Use more of your TV > Use  
EasyLink > Select speaker output (Page 34).  
EasyLink remote control  
You can control multiple HDMI-CEC  
compliant devices with your TV remote  
control.  
Set Scenea lounge light  
When the TV is in standby, you can switch  
on Ambilight and create a lounge light effect  
with your wallpaper. Ambilight is available on  
certain models only.  
To switch on EasyLink Remote Control, see  
Use more of your TV > Use EasyLink >  
Control devices simultaneously (Page 34).  
When the TV is in standby, press  
AMBILIGHT on the front of the TV.  
Retain picture quality  
If your TV picture quality is affected by the  
picture-processing features of other devices,  
switch on Pixel Plus Link.  
Note: It can take more than 5 seconds for  
the lounge light to switch on.  
To select another colour for the lounge light,  
see Use your TV > Ambilight > Setup.  
To switch on Pixel Plus Link, see Use more  
of your TV > Use EasyLink > Retain picture  
quality (Page 35).  
Use EasyLink  
Maximize display for subtitled video  
While you view subtitles in a video, you can  
maximize the video display area. Some  
subtitles can create a separate subtitle bar  
under the video, which limits the video  
display area. After you switch on auto  
subtitle shift, the subtitles display on top of  
the video image, which maximizes the video  
display area.  
What you can do  
Get the most out of your HDMI-CEC  
compliant devices with Philips EasyLink  
enhanced control features. If your HDMI-  
CEC compliant devices are connected  
through HDMI, you can control them at the  
same time with your TV remote control .  
To switch on auto subtitle shift, see Use  
more of your TV > Use EasyLink >  
Maximize display for video with subtitles  
Note: Other brands describe HDMI-CEC  
functionality differently. Some examples are  
Anynet (Samsung), Aquos Link (Sharp) or  
BRAVIA Sync (Sony). Not all brands are fully  
compatible with Philips EasyLink.  
Hear another device at standby  
You can hear a connected HDMI-CEC  
compliant device through the TV speakers,  
even when the TV is in standby.  
After you switch on Philips EasyLink, these  
features are available:  
To switch on, see Use more of your TV >  
Use EasyLink > Hear another device at TV  
standby (Page 35).  
One-touch play  
When you play an HDMI-CEC compliant  
device, the TV switches on from standby,  
and switches to the correct source.  
What you need  
One-touch standby  
To benefit from Philips EasyLink advanced  
control features, make sure that you do the  
following:  
When you press on the TV remote  
control, the TV and all HDMI-CEC  
compliant devices switch to standby mode.  
EN  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Numeric buttons: Select a title, chapter  
or track.  
Connect at least two HDMI-CEC  
compliant devices through HDMI  
Configure each HDMI-CEC compliant  
device properly  
Play buttons: Control video or music  
play.  
Standby: Display the menu of the  
connected device.  
: Display the TV menu.  
Switch on EasyLink  
Switch on  
To switch on or off EasyLink  
Note: If you do not intend to use Philips  
(Standby): Switch the TV and the  
Easylink, switch it off.  
connected device to standby.  
1. Press  
.
Other EasyLink buttons are available through  
the On-Screen Remote Control (OSRC).  
2. Select [Setup] > [TV settings] >  
[EasyLink].  
To access the OSRC  
3. Select [On] or [Off], then press OK.  
1. While you view content from a connected  
device, press  
OPTIONS.  
2. Select [Show device keys], then press  
OK.  
Control devices simultaneously  
3. Select an onscreen button, then press OK.  
4. Press EXIT to exit.  
If you connect multiple HDMI-CEC devices  
that support this setting, all the devices  
respond to the TV remote control.  
Select speaker output  
Caution: This is an advanced setting. Devices  
that do not support this setting will not  
respond to the TV remote control.  
If the connected device is HDMI Audio  
Return Channel (HDMI ARC) compliant,  
you can output TV audio through an HDMI  
cable. An additional audio cable is not  
required. Make sure you connect the device  
to the HDMI ARC connector on the TV.  
See Connect your TV > About cables >  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink].  
3. Select [EasyLink Remote Control] >  
[On] or [Off].  
4. Press OK to activate.  
Configure TV speakers  
Notes:  
1. Press  
.
To switch back to TV control, press  
then select [Watch TV].  
,
2. Select [Setup] > [TV settings] >  
[EasyLink] > [TV speakers].  
To control another device, press  
then select the device from the Home  
menu.  
,
3. Select one of the following options, then  
press OK:  
[Off]: Switch off TV speakers.  
[On]: Switch on TV speakers.  
[EasyLink]: Stream TV audio through  
the connected HDMI-CEC device.  
Switch the TV audio to the connected  
HDMI-CEC audio device through the  
adjust menu.  
[EasyLink autostart]: Turn off TV  
speakers automatically and stream TV  
audio to the connected HDMI-CEC  
audio device.  
To exit, press EXIT.  
EasyLink buttons  
Control HDMI-CEC compliant devices with  
the following buttons on the TV remote  
control.  
OK: Start, pause or resume play on the  
connected device, activate a selection,  
or access the device menu.  
(Previous) / (Next): Search  
backwards and forwards on the  
connected device.  
EN  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Note: Make sure that the picture format of  
the TV is set to [Auto format] or [Movie  
expand 16:9].  
Select speaker output with Adjust menu  
If [EasyLink] or [EasyLink autostart] are  
selected, access the adjust menu to switch  
the TV audio.  
1. While you watch TV, press ADJUST.  
2. Select [Speakers], then press OK.  
Hear another device at TV standby  
You can hear a connected HDMI-CEC  
compliant device through the TV speakers,  
even when the TV is in standby.  
3. Select one of the following, then press  
OK:  
1. Press ADJUST to receive audio from  
the connected Philips EasyLink device.  
If available, audio only mode is enabled.  
2. Accept the prompt on the TV to turn off  
the TV screen.  
[TV]: On by default.  
Stream TV audio through the TV and  
the connected HDMI-CEC audio  
device until the connected device  
switches to system audio control. TV  
audio is then streamed through the  
connected device.  
3. Control the audio playback with the TV  
remote control.  
[Amplifier]: Stream audio through the  
connected HDMI-CEC device. If system  
audio mode is not enabled on the  
device, audio continues to stream from  
the TV speakers. If [EasyLink autostart]  
was enabled, the TV prompts the  
connected device to switch to system  
audio mode.  
Retain picture quality  
If your TV picture quality is affected by the  
picture-processing features of other devices,  
switch on Pixel Plus Link.  
To switch on Pixel Plus Link  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink].  
3. Select [Pixel Plus link] > [On], then press  
OK.  
Maximize video display  
Some subtitles can create a separate subtitle  
bar under the video, which limits the video  
display area. After you switch on auto  
subtitle shift, the subtitles display over the  
video image, which maximizes the video  
display area.  
Switch on auto subtitle shift  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink] > [Auto subtitle shift].  
3. Select [On], then press OK to activate.  
EN  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
[Pixel Plus HD] / [Pixel Precise HD]:  
Access advanced settings, including  
[HD Natural Motion], [Clear LCD]*,  
[Advanced sharpness], [Dynamic  
contrast], [Dynamic backlight], [MPEG  
artefact reduction], [Colour  
4 Set up your TV  
Settings assistant  
Use the settings assistant to guide you  
through the picture and sound settings.  
enhancement], [Gamma].  
*Available on certain models only.  
[PC mode]: Allow picture settings to  
be changed when a PC is connected to  
the TV through HDMI.  
If enabled, you can select [Picture  
format] > [Unscaled] which provides  
maximum detail for display of PC  
content.  
[Light sensor]: Adjust settings  
1. While you watch TV, press  
.
2. Select [Setup] > [Quick picture and  
sound settings], then press OK.  
3. Select [Start], then press OK.  
4. Follow the onscreen instructions to  
choose your preferred settings.  
Picture and sound  
dynamically to match lighting conditions.  
[Picture format]: Change the picture  
format.  
[Screen edges]: Change the picture  
More picture settings  
1. Press  
.
size.  
2. Select [Setup] > [TV settings] >  
[Picture], then press OK.  
[Picture shift]: Adjust the position of  
the picture. You cannot select this  
setting if the selected picture format is  
Auto zoom or Wide screen.  
3. Select a setting to adjust:  
[Smart picture]: Access predefined  
smart picture settings.  
[Reset]: Reset to default settings.  
[Contrast]: Adjust the intensity of the  
bright areas, keeping dark areas  
unchanged.  
More sound settings  
1. Press  
.
2. Select [Setup] > [TV settings] > [Sound],  
then press OK.  
3. Select a setting to adjust:  
[Brightness]: Adjust the intensity and  
details of the dark areas.  
[Colour]: Adjust colour saturation.  
[Hue]: Compensate colour variations in  
NTSC encoded transmissions.  
[Sharpness]: Adjust sharpness in the  
image.  
[Noise reduction]: Filter and reduce  
noise in the image.  
[Tint]: Adjust the colour balance in the  
image.  
[Smart sound]: Access predefined  
smart sound settings.  
[Reset]: Reset to factory default  
settings.  
[Bass]: Adjust the bass level.  
[Treble]: Adjust the treble level.  
[Surround]: Enable spatial sound.  
[Headphones volume]: Adjust  
headphone volume.  
[Auto volume leveling]: Automatically  
reduce sudden volume changes, for  
example when switching channels.  
[Balance]: Adjust the balance of the left  
and right speakers.  
[Custom tint]: Customise tint setting.  
EN  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio settings  
Select audio language  
Channels  
If the TV channel has multiple or dual sound  
broadcast, you can select the preferred  
audio language.  
Reorder and rename  
Reorder channels  
While you watch TV, press  
OPTIONS.  
After the channels are installed, you can  
reorder the channel list to your preference.  
1. While you watch TV, press FIND. The  
channel list is displayed.  
2. Select the channel to reorder and press  
OPTIONS.  
3. Select [Reorder], then press OK.  
[Audio language]: Select the audio  
language for digital channels.  
[Dual I-II]: Select the audio language for  
analogue channels.  
Digital TV channels can stream several audio  
languages. If multiple languages are available,  
select the preferred language.  
4. Press the Navigation buttons to move the  
highlighted channel to another location, then  
press OK.  
5. Select one of the following options, then  
press OK.  
1. Press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Language].  
3. Select one of the following settings, then  
press OK:  
[Insert]: Insert the channel into the  
desired location.  
[Primary audio] / [Secondary audio]:  
Select the available audio language.  
Set a secondary language in the same  
menu. If the primary language is  
unavailable, the TV receives this  
language.  
[Swap]: Swap location with another  
channel.  
6. Once complete, press  
OPTIONS and  
select [Exit].  
Rename channels  
After the channels are installed, you can  
rename them to your preference.  
[Preferred audio format]: Select to  
receive standard audio format (MPEG)  
or advanced audio formats (AAC, EAC-  
3 or AC-3 if available).  
[Mono/Stereo]: Select mono or stereo  
audio if stereo broadcasting is available.  
1. While you watch TV, press FIND. The  
channel list is displayed.  
2. Select the channel to rename and press  
OPTIONS.  
3. Select [Rename], then press OK.  
4. In the entry screen, press the Navigation  
buttons or Numeric buttons to edit the  
name, then press OK.  
4. Press EXIT to exit.  
Reset to factory settings  
You can restore default picture and sound  
settings, while the channel installation settings  
remain the same.  
Tip: You can press OK in the entry screen  
to enable the Onscreen Keyboard.  
5. Once complete, press the Navigation  
buttons to select [Done].  
While you watch TV, press  
2. Select [Setup] > [TV settings] > [Factory  
settings], then press OK.  
.
To clear the entry, select [Clear].  
To cancel, select [Cancel].  
TV settings are reset to default.  
6. Press OK to confirm.  
7. Press to exit.  
EN  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Update channel list  
4. Select one of the following settings:  
[Antenna (DVB-T)]: Access free-to-air  
antenna or digital DVB-T channels.  
[Cable]: Access cable or digital DVB-C  
channels.  
When the TV was switched on for the first  
time, a full installation of channels was  
performed.  
You can automatically add or remove digital  
channels or manually update channels.  
5. Press OK to confirm.  
6. Press EXIT to exit.  
Note: If you are prompted to enter a code,  
enter '8888'.  
Start installation  
Automatic update  
1. Press  
.
To automatically add or remove digital  
channels, leave the TV in standby mode. The  
TV updates channels and stores new  
channels everyday. Empty channels are  
removed from the channel list.  
2. Select [Setup] > [Search for channels] >  
[Reinstall channels], then press OK.  
3. Follow the onscreen instructions to  
complete the channel installation.  
4. Once complete, select [Finish], then press  
OK.  
If a channel update is performed, a message  
appears at startup.  
If you do not want this message to appear  
Tip: Press FIND to see the channel list.  
Notes:  
1. Press  
.
During installation, leave settings  
unchanged unless your digital provider  
gives you the specific values to enter.  
When digital TV channels are found,  
the list of installed channels may display  
empty channel numbers. You can  
rename, reorder or uninstall these  
channels.  
2. Select [Setup] > [Channel settings] or  
[Satellite settings].  
3. Select [Channel installation] > [Channel  
update message].  
4. Select [Off], then press OK.  
To disable automatic updates  
In the [Channel installation] menu, select  
[Automatic channel update] > [Off].  
Install analogue channels  
You can search and store analogue TV  
channels manually.  
Step 1: Select your system  
Note: Skip this step if your system settings  
are correct.  
To manually update channels  
1. Press  
.
2. Select [Setup] > [Search for channels] >  
[Update channels], then press OK.  
3. Follow the onscreen instructions to  
update the channels.  
1. While you watch TV, press  
2. Select [Setup] > [Channel settings] >  
[Channel installation].  
3. Select [Analogue: Manual installation] >  
[System], then press OK.  
.
Automatic install  
When the TV was switched on for the first  
time, a full installation of channels was  
performed. You can run this full installation  
again to set your language, country and install  
all available TV channels.  
4. Select the system for your country or  
region, then press OK.  
Select network  
To install cable or antenna channels, you  
need to switch to the respective network.  
Step 2: Search and store new TV channels  
1. In the [Analogue: Manual installation]  
menu, select [Find channel], then press OK.  
1. While you watch TV, press  
.
2. Select one of the following options:  
2. Select [Setup] > [Channel settings].  
3. Select [Channel installation] > [Antenna  
or Cable DVB].  
Press the Navigation buttons or  
Numeric buttons to manually enter the  
channel frequency.  
EN  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Select [Search] then press OK to  
search for the next channel  
automatically.  
1. While you watch TV, press  
2. Select [Setup] > [Search for satellite] >  
[Reinstall channels].  
.
3. Follow the onscreen instructions to  
complete the installation.  
4. Once complete, select [Finish], and then  
press OK.  
3. When the correct channel frequency is  
entered, select [Done], then press OK.  
4. Select [Store as new channel], then press  
OK to store the new TV channel.  
View satellite channels  
Install digital and satellite channels  
Install digital channels  
To watch satellite channels, press  
[Watch satellite].  
>
To improve TV reception, reposition the  
antenna. You need to know the correct  
frequency to tune. For best results, contact  
the service provider or get a professional  
installer.  
Fine-tune channels  
If the reception of an analogue TV channel is  
poor, fine-tune the TV channel.  
1. Press  
.
2. Select [Setup] > [Channel settings] >  
[Channel installation].  
1. Press  
.
2. Select [Setup] > [Channel settings] >  
[Channel installation].  
3. Select [Analogue: Manual installation] >  
[Fine tune], and then press OK.  
4. Press or to fine-tune the channel.  
3. Select [Digital: Reception test] >  
[Search], then press OK.  
4. Press the Numeric buttons to enter the  
channel frequency.  
5. Select [Search], then press OK.  
5. When you have selected the correct  
channel frequency, select [Done], and then  
press OK.  
6. Select one of the following options, then  
6. When the correct channel is located,  
select [Store], then press OK.  
7. Press EXIT to exit.  
press OK.  
[Store current channel]: Store the  
channel as the current channel number.  
[Store as new channel]: Store the  
channel as a new channel number.  
Notes  
If the reception is poor, reposition your  
antenna and repeat the procedure.  
If you receive the channel with DVB-C,  
select [Automatic] in [Symbol rate  
mode] unless your cable provider  
supplies you with a specific symbol rate  
value.  
Reinstall channels  
ATTENTION: This feature is intended for  
dealers and service personnel.  
You can copy channel lists from one Philips  
TV to another through a USB storage  
device. You do not need to search for  
channels or install them again on the second  
TV. The channel list file is small enough to fit  
on any USB storage device.  
Install satellite channels  
Note: Available on certain models only.  
[Search for satellite] is only available if the  
TV supports DVB-S.  
What you need  
The two Philips TVs must have:  
If your satellite receiver is connected to the  
SAT connector, you can receive satellite  
channels.  
the same country setting,  
the same year range,  
the same DVB type, as indicated by the  
suffix (H, K, T, or D/00) in the model  
name,  
the same settings for satellite channels,  
including the number of LNB satellites  
EN  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. If the country setting on the TV is different  
from that of the TV whose channel list you  
want to copy, reinstall the TV and select the  
country setting to match the first TV. See Set  
up your TV > Reinstall the TV (Page 43).  
5. Connect the USB storage device  
containing the channel list to the TV where  
you want to copy the channel list.  
the same hardware type, as indicated  
by the sticker on the back of the TV,  
(for example Qxxx.xx.Lx), and  
compatible software versions.  
An onscreen message will notify you if the  
channel list cannot be copied to the second  
TV.  
Note: If you are prompted to enter a code,  
enter '8888'.  
Copy channel list to USB  
6. Select [Setup] > [TV settings] >  
[Preferences] > [Channel list copy] >  
[Copy to TV], then press OK. The channel  
list is copied to the TV storage device.  
7. Unplug the USB storage device.  
1. Connect a USB storage device to the TV  
with the channels installed on it.  
2. Press  
.
3. Select [Setup] > [TV settings] >  
[Preferences] > [Channel list copy] >  
[Copy to USB], then press OK. The channel  
list is copied to the USB storage device.  
4. Unplug the USB storage device.  
Menu language  
1. While you watch TV, press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Menu language].  
3. Select a menu language from the list, then  
press OK.  
Copy channel list to TV with no channels  
installed  
1. Switch on the TV with no channels  
installed on it to start the initial installation.  
Select the language and country. The  
country setting must be the same as that of  
the TV whose channel list you want to copy.  
Skip the search for channels.  
Set universal access  
Switch on  
Some digital TV broadcasters provide special  
audio and subtitle features for people who  
are hearing or visually impaired.  
2. Connect the USB storage device  
containing the channel list to the TV.  
3. Press  
.
To enable these features, turn on universal  
access in the preference menu.  
4. Select [Setup] > [TV settings] >  
[Preferences] > [Channel list copy] >  
[Copy to TV], then press OK.The channel  
list is copied to the TV.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Preferences].  
5. Unplug the USB storage device.  
3. Select [Universal access] > [On], then  
Copy channel list to TV with channels  
installed  
press OK.  
Hearing impaired  
Tip: To verify whether a hearing impaired  
audio language is available, press  
OPTIONS and select [Audio language].  
Languages with an ear icon support hearing  
impaired audio.  
1. Switch on the TV on which you want to  
copy the channel list.  
2. Press  
.
3. Select [Setup] > [Search for channels] >  
[Reinstall channels], then press OK.  
You will be prompted to select the country  
where the TV was installed. Make a note of  
the current setting and press  
[Cancel] to exit.  
followed by  
EN  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To switch on hearing impaired audio and  
subtitles  
Audio feedback for the visually impaired  
This feature enables audio feedback when  
buttons are pressed on the remote control  
or TV.  
1. While you watch TV, press  
2. Press one of the following buttons to  
select an option:  
OPTIONS.  
1. In the [Universal access] menu, press the  
blue button to select [Key beep].  
Red: Switch hearing impaired on or off.  
Green: Switch on hearing impaired  
audio and subtitles.  
2. Press the green button to turn on audio  
feedback, or press the red button to turn it  
off.  
3. Press EXIT to exit.  
3. Press EXIT to exit.  
Visually impaired  
Tip: To verify whether visually impaired  
Other settings  
audio is available, press  
OPTIONS and  
select [Audio language]. Languages with an  
eye icon support visually impaired audio.  
To switch on visually impaired audio (if  
available)  
TV demo  
Start a demo to find out more about your  
TV's features.  
1. While you watch TV, press  
OPTIONS.  
Note: Demos are not supported on MHEG  
channels.  
2. Press the green button to select [Visually  
impaired].  
3. Press one of the following buttons to  
select an option:  
1. While you watch TV, press  
2. Select [Setup] > [Watch demos], then  
press OK.  
3. Select a demo, then press OK.  
4. Press EXIT to exit.  
.
Red - [Off]: Turn off visually impaired  
audio.  
Yellow - [Headphones]: Hear visually  
impaired audio from headphones only.  
(if applicable)  
Update software  
Green - [Speakers]: Hear visually  
impaired audio from speakers only.  
Blue - [Speakers + headphones]: Hear  
visually impaired audio from speakers  
and headphones.  
TV software  
Check software version  
1. Press  
.
4. Press EXIT to exit.  
2. Select [Setup] > [Software settings] >  
Note: If the EasyLink remote control is  
enabled, you cannot select the green or  
yellow buttons. To disable, see Use more of  
your TV > Use EasyLink > Switch on (Page  
[Current software info], then press OK.  
The version of the current software is  
displayed.  
Caution: Do not install a lower version of  
software than the current version installed  
on your product. TP Vision cannot be held  
liable or be made responsible for problems  
caused by a software downgrade.  
Adjust volume for the visually impaired  
1. In the [Universal access] menu, press the  
yellow button to select [Mixed volume].  
2. Press the Navigation buttons to move the  
slider up or down, then press OK.  
3. Press EXIT to exit.  
Update the software through one of these  
options:  
update with USB flash drive  
update from digital broadcast  
update from the Internet  
EN  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Update from digital broadcast  
For more information, see the following  
pages.  
When available, your TV can receive  
software updates through digital broadcasts.  
A message appears prompting you to update  
the software. We strongly recommend that  
you update the software when prompted.  
Update with USB  
Before performing this procedure, make sure  
that you have the following:  
Spare time to complete the entire  
update.  
Follow the instructions on screen.  
Note: If you choose to update the software  
at a later time, select > [Setup] >  
[Software settings] > [Local updates].  
A USB flash drive that has at least  
256MB of storage space, is FAT or  
DOS formatted, and has its write  
protection disabled.  
Onscreen Help  
What you need  
Access to a computer with a USB port  
and internet access.  
Note: Do not use a USB hard drive.  
Before you update the onscreen [Help],  
make sure that you have the following:  
1. Press  
.
2. Select [Setup] > [Update software], then  
press OK.  
A USB storage device that is FAT or  
DOS-formatted.  
The update assistant starts.  
3. Follow the onscreen instructions to start  
the update.  
A PC with Internet access.  
An archive utility that supports the ZIP  
file format (for example, WinZip for  
Microsoft Windows or Stufflt for  
Macintosh).  
Note: The update assistant directs you to  
the Philips support website. Refer to the  
installation instructions on the website to  
complete the update.  
Note: Do not use a USB hard drive.  
Download the latest file  
Update from the Internet  
1. Insert a USB storage device into the USB  
connector on your PC.  
2. Create a folder named ‘upgrades’ in the  
root directory of the USB storage device.  
To update the TV software directly from the  
Internet, connect the TV to the Internet  
through a router with a high-speed  
connection.  
3. In your web browser, navigate to  
4. At the Philips Support site, find your  
product and locate the [Help] file for your  
TV. The file (a *.upg file) is compressed into  
a *.zip archive.  
1. Press > [Setup] > [Update software],  
then press OK.  
2. Select [Internet], then press OK.  
3. Follow the onscreen instructions to start  
the update.  
When the update is complete, the TV  
switches off and back on again automatically.  
Wait for the TV to switch back on. Do not  
use the power switch on the TV or the  
remote control.  
5. If the [Help] file is a later version than the  
file in your TV, click it.  
6. Save it to your PC.  
7. Using an archive utility, extract the *.upg  
file from the *.zip file.  
Note: If the TV is connected to the Internet,  
the TV displays the availability of new  
8. Save the *.upg file to the ‘upgrades’ folder  
in the USB storage device.  
9. Disconnect the USB storage device from  
the PC.  
software at startup.  
NonPublish  
EN  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Update [Help]  
Do not switch off the TV or remove  
the USB storage device during the  
update.  
If a power failure occurs during the  
update, do not remove the USB  
storage device from the TV. The TV  
continues to update as soon as power  
is restored.  
If an error occurs during the update,  
retry the procedure. If the error  
reoccurs, contact Philips Consumer  
Care.  
1. Switch on the TV.  
2. Disconnect all other USB devices from the  
TV.  
3. Connect the USB storage device  
containing the *.upg file to the USB  
connector on the TV.  
4. Press  
.
5. Select [Setup] > [Software settings] >  
[Local updates].  
The updates screen appears.  
6. Select the '*.upg' file and press OK.  
A message displays the update status.  
7. Follow the onscreen instructions to  
complete the update and restart your TV.  
Reinstall the TV  
Reinstall your TV to reset all picture and  
sound settings and reinstall all TV channels.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Reinstall TV], then press OK.  
3. Follow the onscreen instructions.  
EN  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Do not use an HDMI cable longer than  
5 meters / 16.4 feet.  
5 Connect your  
TV  
About cables  
Cable quality  
Overview  
Before you connect devices to the TV, check  
the available connectors on the device.  
Connect the device to the TV with the  
highest quality connection available. Good  
quality cables ensure a good transfer of  
picture and sound.  
The connections shown in this user manual  
are recommendations only. Other solutions  
are possible.  
Y Pb Pr  
Tip: If your device only has composite or  
Use the Component Video (Y Pb Pr)  
connection together with an Audio Left and  
Right connection for sound.  
RCA connectors, use a SCART-cinch  
adapter to connect the device to a SCART  
connector on the TV.  
Y Pb Pr can handle high-definition (HD) TV  
signals.  
HDMI  
Match the Y Pb Pr connector colours to the  
cable plugs.  
An HDMI connection has the best picture  
and sound quality.  
An HDMI cable combines video and  
audio signals. Use HDMI for high-  
definition (HD) TV signals, and to  
enable EasyLink.  
An HDMI Audio Return Channel  
(ARC) connector allows output of TV  
audio to an HDMI ARC compliant  
device.  
EN  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SCART  
VGA  
A SCART cable combines video and audio  
signals.  
Use this connection to display PC content  
on the TV.  
SCART connectors can handle RGB video  
signals but cannot handle high-definition  
(HD) TV signals.  
For video and sound, use the VGA and  
AUDIO IN connectors.  
Connect devices  
Overview  
You can connect your devices to the TV with any of the following options. After connection, press  
> [Add your devices].  
EN  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blu-ray or DVD disc player  
Connect the disc player with an HDMI cable to the TV.  
Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV.  
TV receiver  
Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on  
certain models only.)  
EN  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the satellite or digital TV receiver with an HDMI cable to the TV.  
Connect the satellite or digital TV receiver with a SCART cable to the TV.  
Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R  
cable to the TV.  
EN  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recorder  
Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.)  
Connect the recorder with a SCART cable to the TV.  
Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.  
For the best gaming experience, set the TV  
to game mode.  
Game console  
The most practical connectors for a game  
console are on the side of the TV. However,  
you can also use the connectors at the back  
of the TV.  
1. Press ADJUST.  
2. Select [Smart picture] > [Game], then  
press OK.  
3. Press EXIT to exit.  
EN  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the game console with an HDMI cable to the TV.  
Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV.  
Home theatre system  
Connect the home theatre with an HDMI cable and an audio cable to the TV.  
EN  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the home theatre with a SCART cable to the TV.  
Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV.  
Digital camera  
Connect the digital camera with a USB cable to the TV.  
EN  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital camcorder  
Connect the digital camera with an HDMI cable to the TV.  
Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.  
Connect more devices  
External hard disk  
Connect the external hard disk with a USB cable to the TV.  
EN  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer  
Connect the computer with an HDMI cable to the TV.  
Connect the computer with a DVI-HDMI cable to the TV.  
Connect the computer with a VGA cable and an audio cable to the TV.  
To install the USB keyboard  
Keyboard and mouse  
USB keyboard  
*Available on certain models only.  
You can connect a USB keyboard to enter  
text on the TV. You can also type in a new  
channel name or subject name in the  
YouTube application within Net TV.  
Switch on the TV. Connect the USB  
keyboard to the USB connector on the side  
of the TV. If you need extra USB connectors,  
use a USB hub.  
Once the TV detects the keyboard, select  
the keyboard layout and test your selection.  
EN  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you have selected a Cyrillic or Greek  
keyboard layout first, you can also add a  
second keyboard with Latin layout.  
Once the TV detects the mouse, set the  
tracking speed. Navigate into the test area to  
check the speed.  
To use the USB mouse with your TV  
To change the keyboard layout setting, press  
> [Setup] > [TV settings] >  
[Preferences] > [USB mouse/keyboard] >  
[Keyboard settings] and press OK .  
Left mouse button (left-click) :OK  
Right mouse button (right-click) :  
(Back)  
TV keys on your keyboard  
To make a text entry, you can use these  
keys:  
Scroll wheel : to scroll up and down an  
internet page.  
Enter : OK  
Backspace : delete a character  
before the cursor  
Navigation keys : navigate within a text  
field  
(if a second keyboard layout is set) to  
switch between different keyboard  
layouts, press the Altand Shift keys  
simultaneously.  
Computers and the  
Internet  
What you can do  
Browse PC  
If you connect the TV to a home network,  
you can play photos, music and videos from  
your computer or storage device. Once the  
network is installed on the TV, you can find  
and play the files from your PC on the TV  
screen.See Use your TV > Browse PC  
through DLNA (Page 19).  
Net TV keys on your keyboard  
Enter : OK to confirm an entry.  
Backspace : return to the previous  
page.  
Navigation keys : navigate to the next  
field.  
Home : scroll to the top of the page.  
End : scroll to the bottom of the page.  
Page Up : jump one page up.  
Page Down : jump one page down.  
+/- : zoom in or out one step.  
* : fit to the width of the page.  
Note: If the apparatus does not recover in  
DLNA mode due to external electrical  
disturbances (e.g. electrostatic discharge),  
user intervention is required.  
Net TV  
If you connect the TV to a home network  
with an Internet connection, you can link up  
the TV to Net TV. Net TV offers Internet  
services and websites tailored to your TV.  
Play music and videos, consult infotainment,  
rent movies and much more. Once the  
network is installed, you can enjoy the best  
of the Internet for your TV. See Use your  
TV > Browse Net TV (Page 21).  
USB mouse  
*Available on certain models only.  
You can connect a USB mouse to navigate  
pages on the Internet. On an Internet page,  
you can select and click on links more easily.  
The USB mouse cannot navigate in Net TV  
application pages nor navigate in the TV  
menus.  
What you need  
Warning: This TV complies with the EMC  
directive only when you use a shielded  
Cat5 ethernet cable.  
To install the USB mouse  
Switch the on TV. Connect the USB mouse  
to the USB connector on the side of the TV.  
If you need extra USB connectors, use a  
USB hub. You can also connect the USB  
mouse to a connected USB keyboard.  
To connect your TV to computers, the  
Internet, or both, you need:  
An ethernet cable that is shorter than 3  
metres.  
EN  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
A computer network that includes:  
a) A universal plug-and-play (UPnP)  
router and  
b) A computer with one of these  
operating systems: Microsoft Windows  
XP, Microsoft Windows Vista, Mac  
OSX, or Linux.  
Wireless LAN ready  
This section is only for wireless ready TVs.  
With the Wireless USB adapter PTA01  
accessory (sold separately), you can connect  
the TV to your home network wirelessly.  
You can enjoy the best of the web from Net  
TV services, and sharing of content between  
your devices connected to the home  
To connect your TV to computers, you  
also need media server software that is  
set to share files with your TV. See Use  
your TV > Browse PC through DLNA  
network using Wi-Fi MediaConnect or  
DLNA, seamlessly and hassle free.  
Note:  
The wireless network operates in the  
same 2.4GHz frequency spectrum as  
common household devices, such as  
Dect phones, microwave ovens or  
Bluetooth devices, which can cause Wi-  
Fi interferences. Move these devices  
away from the TV with the connected  
Wireless USB adapter.  
To connect your TV to the Internet,  
you also need a high-speed connection  
to the Internet.  
Note: This DLNA1.5 network feature  
supports these computer operating systems:  
Microsoft Windows XP or Vista, Intel Mac  
OSX or Linux.  
You should turn off any unused  
network equipment in the home  
network as this increases network  
traffic.  
Connect  
Reception quality is dependent on the  
location of the wireless router, as well  
as the quality of services provided by  
the local Internet Service Provider.  
When playing video over your wireless  
home network, we recommend that  
you use an IEEE 802.11 N router. The  
connection speed may differ according  
to the operating environment of your  
wireless home network.  
1. Switch on the router and switch on its  
DHCP setting.  
2. With the ethernet cable, connect the  
router to the TV.  
Alternatively, you can also connect the  
router to the TV wirelessly, through a  
wireless USB adaptor (not included). See  
Connect your TV > Computers and the  
Internet > Wireless LAN ready (Page 54).  
Make your TV wireless  
1. Switch on your wireless network router.  
2. Insert the USB adapter PTA01 into the  
USB connection at the side of the TV. The  
wireless installation starts automatically.  
3. Follow the on screen instructions.  
3. Press , select [Setup] > [Connect to  
network], then press OK.  
4. Follow the onscreen instructions to install  
the network.  
5. Wait for the TV to find the network  
connection.  
6. If you are prompted, agree to the End  
User License Agreement.  
WPS - Wi-Fi Protected Setup  
If your router supports WPS (Wi-Fi  
Protected Setup), press the WPS button on  
the router. Return to the TV in 2 minutes,  
select [WPS] and press OK. The TV  
connects to your network. This takes about  
2 minutes. Complete the installation.  
EN  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Most new wireless routers have the WPS  
system and carry the WPS logo. The WPS  
system uses WPA security encryption and  
cannot be combined with devices on your  
network that use the WEP security  
encryption. If you still need this WEP device  
in your network, install with [Scan] >  
[Custom].  
Find this hexadecimal key in the router  
software on your PC. Write down the first  
key of the WEP keys list and enter it on the  
TV with the remote control. If the security  
key is accepted, the TV is connected with  
the wireless router.  
If asked, agree to the End User License  
Agreement.  
Scan for routers  
If you are using the Wireless USB adapter,  
keep it connected to the USB connector on  
the TV.  
If you have several routers in your network,  
you can select the network you need. To  
select a specific network router, press  
[Scan]on the first page of the installation.  
Wi-Fi MediaConnect  
What you can do  
The routers with WPS and the strongest  
signal are shown first in the list on screen.  
With Wi-Fi MediaConnect, you can project  
your PC screen on the TV wirelessly. With  
the *Wi-Fi MediaConnect CD-ROM, you  
can download the software for free. Wi-Fi  
MediaConnect is only available for PC.  
Select the router you need. If you are  
connecting a WPS router, select [WPS] on  
the TV.  
If you have set the PIN code in your  
router software, select [WPS pincode:]  
*The Wi-Fi MediaConnect CD-ROM is  
supplied with the Wireless USB adapter,  
PTA01.  
and enter the code.  
To enter the encryption key manually,  
select [Custom] and enter the key.  
What you need  
To use Wi-Fi MediaConnect, you need the  
following:  
PIN code  
To set the secured connection with a PIN  
code, select the PIN code and press OK.  
Write down the 8 digit PIN code shown on  
the TV and enter it in the router software  
on your PC. See the router manual for  
where to enter the PIN code.  
Connect the TV to your home network  
A wireless router  
A wireless USB adapter - PTA01 (For  
non-Wi-fi integrated TVs only).  
For the availability of the wireless USB  
adapter, check with your local retailers or  
buy online at www.philips.com/tv.  
Custom  
Install Wi-Fi MediaConnect (with CD-  
ROM)  
To enter the encryption key (the security  
key) manually, select [Custom] and press  
OK. If you have WPA security on your  
router, enter the passphrase with the  
remote control.  
1. Insert the Wi-Fi MediaConnect CD-ROM  
in your PC.  
2. Your PC starts the Internet browser and  
opens the Wi-Fi MediaConnect download  
On the website, you can check the  
necessary PC system requirements.  
To access the on-screen keyboard, select the  
text entry field and press OK. If you have  
WEP security encryption, the TV asks for the  
WEP encryption key in hexadecimal  
numbers.  
EN  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Enter the code printed on the CD-ROM  
envelope.  
4. Click the 'Download now' button to  
download the free Wi-Fi MediaConnect  
software.  
200 MB free hard disk space  
Wi-Fi 802.11g  
Internet connection  
Project your PC: PC requirements  
5. Once downloaded, start the file 'Wi-Fi  
MediaConnect_setup.exe'. Follow the  
instructions on your PC.  
Recommended specifications  
Windows XP, Vista, Windows 7 (PC  
only)  
Intel Pentium Core 2 Duo 2.1 GHz  
1 GB RAM  
200 MB free hard disk space  
Wi-Fi 802.11n  
TV network name  
If you have more than one TV in your home  
network, you can rename this TV. To  
rename this TV in the network, press  
[Setup] > [Network settings] and select the  
>
Internet connection  
TV network name.  
To enter the name, press OK to open the  
on-screen keyboard or use the remote  
control keypad.  
Common interface  
What you can do  
To watch some digital TV programmes, you  
need a Conditional Access Module (CAM).  
Start projecting  
To start projecting the PC screen on the TV,  
click on the small TV-like icon in the taskbar  
at the bottom right of the PC screen. Your  
PC screen appears on your TV screen.  
If a CAM is inserted and subscription fees  
are paid, you can watch the channel. The  
applications, functions, the content and the  
onscreen messages vary for each CAM  
service.  
Stop projecting  
To stop projecting, click on the TV icon  
again.  
What you need  
Caution: To protect the CAM from damage,  
insert the CAM according to these  
instructions.  
Project your PC: Help  
To read the Wi-Fi MediaConnect Help,  
right-click the program icon in the  
notification tray of the PC and select Help.  
Notes:  
Specifics  
This TV supports CI as well as CI+. CI+  
allows service providers to offer  
premium HD digital programmes with a  
high level of copy protection.  
You can project high-definition (HD) or  
standard-definition (SD) video, depending on  
the processing power of your PC.  
Due to output content protection,  
certain commercial DVD or Blu-ray  
discs may not be projected.  
The TV shows PC media files with a  
small delay.  
Refer to the documentation from your  
service operator on how to insert a  
smart card into the Conditional Access  
Module.  
Wi-Fi MediaConnect is available for PC  
only.  
Project your PC: PC requirements  
Minimum specifications  
Windows XP, Vista, Windows 7 (PC  
only)  
Intel Pentium Core 2 Duo 1.8 GHz  
512 MB RAM  
EN  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Switch off the TV.  
2. Follow the directions printed on the CAM  
and insert the CAM into the Common  
Interface at the side of the TV.  
3. Push the CAM in as far as it will go, then  
wait for the CAM to be activated. This takes  
a few minutes.  
To prevent digital services from being  
deactivated, do not remove the CAM from  
the slot when it is in use.  
Watch CAM services  
1. After inserting and activating the CAM,  
press  
OPTIONS.  
2. Select [Common interface], then press  
OK.  
3. Select the CAM provider and press OK.  
EN  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You forgot the code to unlock the child  
lock feature:  
Enter ‘8888’.  
6 Troubleshooting  
Contact Philips  
The TV menu is in the wrong language:  
Change the TV menu to your preferred  
language.  
For more information, see Set up your TV >  
Menu language (Page 40).  
Warning: Do not attempt to repair the TV  
yourself. This may cause severe injury,  
irreparable damage to your TV or void  
your warranty.  
When you are turning the TV on, off or to  
standby, you hear a creaking sound from  
the TV chassis:  
No action is required. The creaking sound is  
due to the normal expansion and  
If you cannot resolve your problem, refer to  
the frequently asked questions (FAQs) for  
You can also contact Philips Consumer Care  
in your country for support. You can find the  
contact number in the leaflet that  
accompanies the TV.  
contraction of the TV as it cools and warms  
up. This does not affect performance.  
When the TV is in standby, a startup splash  
screen is displayed, then returns to standby  
mode:  
This is normal behavior. When the TV is  
disconnected and reconnected to the power  
supply, the startup screen is displayed at the  
next startup.  
To switch on the TV from standby, press  
on the remote control or press any key on  
the front of the TV.  
Take a note of your TV model and serial  
number before you contact Philips. These  
numbers are printed on the back of the TV  
and on the packaging.  
General TV  
The TV does not switch on:  
Disconnect the power cable from the  
power outlet. Wait for one minute  
then reconnect it.  
TV channel  
Make sure that the power cable is  
securely connected.  
Make sure that the power switch at the  
Previously installed channels do not appear  
in the channel list:  
Make sure that the correct channel list is  
selected.  
No digital channels were found during the  
installation:  
base or back of the TV is switched on.  
The TV does not respond to remote  
control or front controls when switched  
on  
The TV requires some time to start up.  
During this time, the TV does not respond  
to the remote control or front controls. This  
is normal behavior.  
Make sure that the TV supports DVB-T,  
DVB-C or DVB-S in your country.  
Make sure that the antenna is properly  
connected and the correct network is  
selected.  
The standby light on the TV blinks red:  
Disconnect the power cable from the power  
outlet. Wait until the TV cools down before  
you reconnect the power cable. If the  
blinking reoccurs, contact Philips Consumer  
Care.  
Picture  
The TV is on, but there is no picture or the  
picture is distorted:  
Make sure that the antenna is properly  
connected to the TV.  
EN  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Make sure that the correct device is  
selected as the display source.  
Make sure that the external device or  
source is properly connected.  
An "e-sticker" banner displaying  
information appears on the TV display:  
The TV is in [Shop] mode. To remove the  
e-sticker, set the TV to [Home] mode, then  
restart the TV. Position the TV > Location  
There is sound but no picture:  
Make sure that the picture settings are set  
correctly.  
The computer display on the TV is not  
stable:  
There is poor TV reception from an  
antenna connection:  
Make sure that your PC uses the  
supported resolution and refresh rate.  
See Product specifications > Display  
resolutions (Page 61).  
Make sure that the antenna is properly  
connected to the TV.  
Loud speakers, unearthed audio  
devices, neon lights, high buildings and  
other large objects can influence  
reception quality. If possible, try to  
improve the reception quality by  
changing the antenna direction or  
moving devices away from the TV.  
If reception on only one channel is  
poor, fine-tune this channel.  
Set the TV picture format to  
[Unscaled].  
Sound  
There is a picture but sound quality is  
poor:  
If no audio signal is detected, the TV  
automatically switches the audio output off  
this does not indicate malfunction.  
There is poor picture quality from  
connected devices:  
Make sure that the devices are  
connected properly.  
Make sure that all cables are properly  
connected.  
Make sure that the volume is not  
muted or set to zero.  
Make sure that the TV speakers setting  
is selected. Press ADJUST, select  
[Speakers], and then select TV.  
Make sure that the picture settings are  
set correctly.  
The TV did not save your picture settings:  
Make sure that the TV location is set to  
Home. You can change and save settings in  
this mode.  
Make sure that the TV audio output is  
connected to the audio input on the  
HDMI-CEC enabled or EasyLink  
compliant home theatre device. Sound  
should be heard from the home theatre  
speakers.  
The picture does not fit the screen; it is  
too big or too small:  
Try a different picture format.  
The picture position is incorrect:  
Picture signals from some devices may not fit  
the screen correctly. Check the signal output  
of the device.  
The picture from broadcasts is scrambled:  
You may need a Conditional Access Module  
to access content. Check with your service  
operator.  
There is a picture but the sound quality is  
poor:  
Make sure that the sound settings are  
correctly set.  
There is a picture but sound comes from  
one speaker only:  
Make sure that sound balance is set to the  
centre.  
EN  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio and picture files do not play or  
display smoothly:  
HDMI  
There are problems with HDMI devices:  
The transfer performance of the USB  
storage device may limit the data transfer  
rate to the TV which causes poor playback.  
Note that HDCP (High-bandwidth  
Digital Content Protection) support can  
delay the time taken for a TV to display  
content from a HDMI device.  
If the TV does not recognise the HDMI  
device and no picture is displayed,  
switch the source from one device to  
another and back again.  
If there are intermittent sound  
disruptions, make sure that output  
settings from the HDMI device are  
correct.  
If you use an HDMI-to-DVI adapter or  
HDMI to DVI cable, make sure that an  
additional audio cable is connected to  
AUDIO L/R or AUDIO IN (mini-jack  
only).  
Network  
Net TV does not work  
If the connection to the router is properly  
set up, check the router connection to the  
Internet.  
Browse PC or Net TV access is slow.  
Refer to your router's user manual for  
information on transfer rate and other  
factors of signal quality.  
You need a high-speed Internet connection  
for your router.  
Wireless network is distorted or not  
found.  
You cannot use EasyLink features:  
Make sure that your HDMI devices are  
HDMI-CEC compatible. EasyLink features  
only work with devices that are HDMI-CEC  
compatible.  
Make sure that the wireless network is  
not disturbed by microwave ovens,  
DECT phones or other neighbouring  
Wi-Fi devices.  
If the wireless network is not working,  
try a wired network connection.  
For DLNA connection, click on How  
does sharing change firewall settings in  
the Media Sharing window for the Help  
file.  
If an HDMI-CEC compliant audio device is  
connected to the TV and the TV does not  
display any mute or volume icon when the  
volume is muted, increased or decreased.  
This behaviour is normal when an HDMI-  
CEC audio device is connected.  
USB  
USB device content is not displayed:  
Make sure that the USB storage device  
is set to Mass Storage Class compliant,  
as described in the storage device's  
documentation.  
Make sure that the USB storage device  
is compatible with the TV.  
Make sure that the audio and picture  
file formats are supported by the TV.  
EN  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Aspect ratio: Widescreen 16:9  
Panel resolution: 1920 x 1080 p  
Pixel Plus HD picture enhancement  
1080 p 24 / 25 / 30 / 50 / 60 Hz  
processing  
7 Product  
specifications  
Perfect Motion Rate:  
- For 6000 series: 400 Hz PMR  
- For 5800 series: 200 Hz PMR  
Power and reception  
Product specifications are subject to change  
without notice.  
Sound  
Output power (RMS) @ 30% THD:  
- For 6000 series 32 to 40-inch models:  
24 W  
Power  
Mains power: AC 220-240 V~, 50-60  
Hz  
- For 6000 series 46 to 55-inch models:  
28 W  
- For 5800 series: 20W  
Standby power: <0.15 W  
Ambient temperature: 5 to 40 degree  
Celsius  
Incredible Surround  
Clear Sound  
Dynamic Bass Enhancement  
Mono / Stereo / NICAM  
For power consumption, see the  
product specifications at  
The power rating stated on the product  
typeplate is the power consumption for this  
product during normal household use (IEC  
62087 Ed.2). The maximum power rating,  
stated between brackets, is used for  
Display resolutions  
electrical safety (IEC 60065 Ed. 7.2).  
Computer formats - HDMI  
(Resolution - refresh rate)  
Reception  
Antenna input: 75 ohm coaxial (IEC75)  
TV system: DVB COFDM 2K/8 K,  
Video playback: NTSC, PAL, SECAM  
Digital TV: MPEG-4, DVB-T  
(Terrestrial), *DVB-T2, DVB-C (Cable),  
*DVB-S/S2 (Satellite), *MHP  
(Multimedia Home Platform).  
Tuner bands: VHF, UHF, S-Channel,  
Hyperband  
640 x 480 - 60 Hz  
800 x 600 - 60 Hz  
1024 x 768 - 60 Hz  
1280 x 1024 - 60 Hz  
1360 x 768 - 60 Hz  
1600 x 1200 - 60 Hz  
1920 x 1080 - 60 Hz  
Computer formats - VGA  
(Resolution - refresh rate)  
Available on certain models only.  
640 x 480 - 60 Hz  
800 x 600 - 60 Hz  
1024 x 768 - 60 Hz  
1280 x 1024 - 60 Hz  
1360 x 768 - 60 Hz  
1600 x 1200 - 60 Hz  
1920 x 1080 - 60 Hz  
Display and sound  
Picture/Display  
Display type: LCD Full HD W-UXGA  
Diagonal size:  
- 81 cm/32 inch  
- 94 cm/37 inch  
- 102 cm/40 inch  
- 117 cm/46 inch  
- 140 cm / 55 inch  
EN  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video formats  
(Resolution - refresh rate)  
Multimedia  
480i - 60 Hz  
480p - 60 Hz  
576i - 50 Hz  
576p - 50 Hz  
720p - 50Hz, 60 Hz  
1080i - 50Hz, 60 Hz  
1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz  
Supported multimedia connections  
USB (FAT or DOS-formatted; Mass  
Storage Class compliant with 500mA  
only)  
SD card slot  
Ethernet UTP5  
Supported image files  
JPEG (*.jpg)  
Supported audio/video files  
Multimedia file names must not exceed 128 characters.  
Macrovision Network Media Server (for  
Microsoft Windows)  
Fuppes (for Linux)  
Supported DLNA-compliant media server  
software  
Windows Media Player (for Microsoft  
Windows)  
Twonky Media (for Microsoft Windows  
and Mac OS X)  
Sony Vaio Media Server (for Microsoft  
Windows)  
uShare (for Linux)  
Connectivity  
Rear  
TVersity (for Microsoft Windows)  
Nero MediaHome  
DiXiM (for Microsoft Windows XP)  
EXT 1: SCART (RGB/CVBS)  
EXT 2: Component (Y Pb Pr), Audio  
L/R  
EN  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERV.U: Service port  
AUDIO IN: DVI/VGA stereo 3.5-mm  
mini-jack  
SAT (DVB-S): Available on certain  
models only.  
Dimensions  
Note: Dimensions and weights are  
approximate values only. Design and  
specifications are subject to change without  
notice.  
Bottom  
Network: Ethernet  
DIGITAL AUDIO OUT: Coaxial  
HDMI 2: HDMI  
HDMI 1 ARC: HDMI Audio Return  
Channel  
Antenna: 75 ohm coaxial  
VGA: PC input  
Legend for TV dimensions  
The legends used to indicate the TV  
dimensions are as follows:  
( ) : 81 cm / 32 inch TV  
{ } : 94-cm/37-inch TV  
[ ] : 102 cm / 40 inch TV  
(( )) : 117-cm/46-inch TV  
{{ }} : 140 cm / 55 inch TV  
Side  
Common Interface: CI  
SD card  
USB  
Headphones: Stereo 3.5-mm mini-jack  
HDMI  
Take a note of the legend that corresponds  
to your TV. Then, go to the next page to  
view the dimensions.  
Use your TV legend to note the weight of the TV without the stand.  
Use your TV legend to note the weight of the TV with stand.  
EN  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use your TV legend to note the dimensions of your TV (with and without the stand).  
Use your TV legend to note the thickness of your TV (with and without the stand).  
Help version  
UMv 3139 137 04194- 2012 0402  
EN  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D
8 Index  
demo - 41  
A
devices, add - 16  
devices, watch - 16  
digital channels - 39  
digital channels, subtitles - 32  
digital radio - 15  
dimensions - 63  
display - 61  
age rating - 32  
analogue channels, fine-tune - 39  
analogue channels, subtitles - 32  
audio language - 37  
C
CAM, enable - 57  
display resolution - 61  
DLNA - 19  
CAM, insert - 56  
CAM, see Conditional Access Module - 56  
care - 7  
E
EasyLink, controls - 34  
channel list - 15  
EasyLink, enable - 33  
channels, favourites - 15  
channels, fine-tune (analogue) - 39  
channels, install (automatic) - 38  
channels, install (manual) - 38  
channels, reinstall - 39  
channels, rename - 37  
channels, reorder - 37  
channels, switch - 14  
channels, update - 38  
child lock - 31  
EasyLink, features - 33  
EasyLink, RC key forward - 33  
EasyLink, TV speakers - 34  
Electronic Programme Guide - 15  
end of use - 8  
environment efforts - 7  
environment, recycle - 8  
EPG, Electronic Programme Guide - 15  
EPG, menu - 15  
clock - 31  
F
common interface - 56  
computer, play files - 20  
computer, see PC - 53  
Conditional Access Module - 56  
connect device - 45  
factory settings - 37  
favourites list, add - 15  
H
HbbTV - 29  
connect, PC - 52  
HbbTV, block reception - 29  
HDMI - 44  
connect, USB - 17  
connectors - 4  
HDMI ARC - 44  
contact information, on Internet - 10  
contact Philips - 10  
hearing impaired - 40  
help, onscreen - 10  
high-definition (HD), content - 5  
controls - 11  
EN  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
home menu - 3  
home mode - 9  
power - 61  
R
I
recording, TV shows - 26  
recordings, manage - 28  
recycle - 7  
install channels - 38  
install channels (automatic) - 38  
install channels (manual) - 38  
register product - 10  
reinstall TV - 43  
K
remote control - 11  
kensington lock - 10  
remote control, batteries - 12  
remote control, onscreen - 34  
remote control, overview - 11  
rename channels - 37  
reorder channels - 37  
L
language, menu - 40  
location, home or shop - 9  
M
S
media server software (Mac) - 20  
media server software (PC) - 19  
multimedia - 62  
safety - 6  
Scenea, enable - 32  
Scenea, see screen saver - 32  
screen saver - 32  
Multimedia Home Platform (MHP) - 24  
multimedia, play files - 17  
SD card, format - 22  
SD card, memory size - 22  
settings, assistant - 36  
settings, picture - 36  
settings, sound - 36  
shop mode - 9  
mute TV speakers - 34  
N
Net TV, browse - 21  
network, connect - 53  
O
sleeptimer - 31  
smart picture - 15  
online video, rent - 22  
smart sound - 36  
P
software, digital update - 42  
software, Internet update - 41  
software, version - 41  
sound settings - 36  
subtitle, analogue - 32  
subtitle, digital - 32  
subtitle, language - 32  
switch TV on, off - 13  
Pause TV - 25  
PC, connect - 52  
PC, display resolutions - 61  
picture format - 36  
picture settings - 36  
Pixel Plus link - 35  
placement, stand or wall mount - 8  
position the TV - 8  
EN  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T
teletext 2.5 - 30  
teletext, digital text - 30  
teletext, dual screen - 30  
teletext, enlarge - 30  
teletext, language - 30  
teletext, search - 30  
teletext, subpages - 30  
U
universal access, enable - 40  
universal access, hearing impaired - 40  
universal access, visually impaired - 41  
USB keyboard - 52  
USB mouse - 52  
V
visually impaired - 41  
volume - 11  
W
wall mount - 9  
wallpaper - 32  
Wi-Fi MediaConnect - 55  
Wireless LAN ready - 54  
EN  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2012 TP Vision Netherlands B.V.  
All rights reserved.  
Document order number 313913704194_edited  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentax Digital Camera MZ 60 User Manual
Pentax Network Card Laboratory 20 User Manual
Pfaff Sewing Machine Hobby 350p User Manual
Philips Breast Pump SCF300 13 User Manual
Philips Flat Panel Television 19PFL3403D 27E User Manual
Philips Microcassette Recorder LFH 660 User Manual
Philips Portable Radio SA1MXX02P User Manual
Philips Projector LC4242 User Manual
Philips Speaker System SPA7210 17 User Manual
Pico Macom Stereo Amplifier TA 52 User Manual