Colour television
Colour television
Operating Instruction
29PT5307
29PT5308
1-4_29PT5307_E
1
09/20/04, 2:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION AND USEFULT IPS
Safety Information
•
Disconnect mains plug when :
–
–
–
the red light below theTV screen is flashing continuously.
a bright white line is displayed across the screen.
cleaning theTV screen. Never use abrasive cleaning agents. Use a slight damp chamois
leather or soft cloth.
–
–
there is a lightning storm.
the set is left unattended for a prolonged period of time.
•
No naked flame sources, such as lighted candles, should be placed on top of theTV or
in the vicinity.
•
•
•
Do not place yourTV set under direct sunlight or heat.
Leave at least 5 cm around each side ofTV set to allow for proper ventilation.
Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain
or water.
•
No objects filled with liquids should be placed on top theTV so as to avoid dripping
or splashing of liquids on the set.
UsefulTips
•
•
•
Do not leave your set on standby mode for a prolonged period of time. Switch off set
to allow it to be demagnetised. A demagnetised set supports good picture quality.
Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
Never attempt to repair a defectiveTV yourself.Always consult a skilled service
personnel.
3
1-4/E
3
01/15/03, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING SERVICE
Below is a list of frequently occurred symptoms. Before you call for service, make these simple
checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom
What you should do
Colour patch
(uneveness)
• Switch off theTV by the mains power button.Wait for 20
minutes before switching on again.
• Check theTV is not placed too near speakers or magnetic
objects.
No power
No picture
• Check theTV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug.Wait for
60 seconds and re-insert plug. Switch on theTV again.
• Check the antenna connection at the rear of theTV.
• PossibleTV station problem.Try another channel.
Good picture
but no sound
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
Good sound but poor
colour or no picture
• Try increasing the contrast and brightness setting.
• Check antenna connection at the rear of theTV.
Snowish picture and
noise
Horizontal dotted lines
• Possible electrical interference e.g. hairdryer, vacuum
cleaner, etc. Switch off appliances.
Double images or
“Ghost” images
• Possible poor positioning of antenna. Using a highly
directional antenna may improve reception.
TV not responding to
remote control handset
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control
sensor lens on theTV.
4
1-4/E
4
01/15/03, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UPY OUR TV (BASIC CONNECTION)
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
• Insert the mains plug into the wall socket.
Mains Connection
• For correct mains voltage, refer to type sticker at
the rear of theTV set
• Consult your dealer if mains supply is different.
Note :This diagram is not representative of the
actual plug and socket.
Switching on the Set
• Press the main power button to switch on/
off theTV.
• If the set is on standby (indicator is red),
press the Power button on the remote
control to switch on set.
USE/CARE OF REMOTE CONTROL
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
5
5-11_29PT5307_E
5
09/20/04, 2:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
Monitor out
VIDEO
AV1 in
AV2 in
AV sockets on
the rear of TV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
OUT
OUT
OUT
ANTENNA
VIDEO
L
R
AUDIO
IN
IN
IN
Back of VCR
VCR (equipped withVideo and
Audio output sockets)
You can view the playback ofVCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO
andVIDEO INPUT sockets on the rear of theTV.
– Connect the VIDEO and AUDIO IN sockets on the rear of theTV to the AUDIO and
VIDEO OUT sockets on theVCR.
Monitor out
VIDEO
AV1 in
AV2 in
AV sockets on
the rear of TV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
OUT
OUT
VIDEO
IN
OUT
OUT
ANTENNA
IN
L
R
AUDIO
S-VIDEO
IN
Back of S-VHSVCR
The S-Video connection on the rear of theTV is used for the playback of S-VHS VCR tapes,Video Discs,
Video Games or Compact Disc-Interactive (cd-i) discs. Better picture detail and clarity is possible with
the S-Video playback as compared to the picture from a normal antenna (RF) connection.
– Connect the S-VIDEO socket on the rear of theTV to the S-VHS OUT socket on a
S-VHS VCR.
– Connect the AUDIO IN sockets from the rear of theTV to the AUDIO OUT sockets
on theVCR. Note : You need not connect the VIDEO IN socket of theTV if S-VIDEO IN
socket is connected.
6
5-11/E
6
01/15/03, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLACKBACK)
Monitor out
VIDEO
AV1 in
AV2 in
AV sockets on rear ofTV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
OUT
Pb
OUT
Back of DVD
Y
Pr
L
R
AUDIO
DVD (Equipped with“Y”,
“Pb” and “Pr” and Output
sockets)
You can view the playback of DVD discs by using the COMPONENTVIDEO INPUT sockets on the
rear of theTV.
– Connect the “Y”,“Pb” and the “Pr” INPUT sockets on theTV to the “Y”,“Pb” and
“Pr” OUTPUT sockets on the DVD to view playback of DVD discs.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLACKBACK)
Camcorder
Connect headphone jack to
socket for personal listening
For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick
and easy connections, particularly Camcorder tape recordings.
– Connect the VIDEO socket from the Camcorder to the Side VIDEO in socket of theTV.
– Connect the AUDIO OUT sockets (Right and Left) from the Camcorder to the Side
AUDIO IN sockets.
7
5-11_34PT4323/E
7
03/04/03, 5:34 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING)
Connection for recording from theTV channel
AV sockets on
the rear of TV
Monitor out
VIDEO
AV1 in
AV2 in
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
OUT
OUT
OUT
ANTENNA
VIDEO
L
R
AUDIO
IN
IN
IN
VCR (equipped withVideo and
Audio input sockets)
– Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT
sockets on the rear of theTV.
– To enhance the sound of yourTV, connect the AUDIO L and R sockets to an external audio
system instead of theVCR. For mono equipment, connect only the AUDIO L socket.
Connection for recording from oneVCR to anotherVCR
Monitor out
VIDEO
AV1 in
AV2 in
AV sockets on
the rear of TV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
OUT
ANTENNA
IN
OUT
OUT
Pr
VIDEO
L
R
AUDIO
COMPONENT VIDEO INPUT
OUT
OUT
OUT
ANTENNA
VIDEO
L
R
AUDIO
IN
IN
IN
Back ofVCR
VCR 2
VCR 1
VCR (equipped withVideo and
Audio input sockets)
– Connect the sockets of theVCR which you wish to record from, to the corresponding
sockets at either AV1 orAV2
– Connect the sockets of the receiving VCR to the MONITOR OUTPUT sockets on the
rear of theTV.
8
5-11/E
8
01/15/03, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF REMOTE CONTROL
& Power button
–
Switch set off temporarily to standby mode.
(The red light indicator lights up when the set
is on standby mode).
To switch on set from standby mode, press
Channel +/– , Digit (0 -9) or Power button.
&
é
–
“
‘
(
§
è
!
ç
é Teletext Colour/Personal Zapping buttons
–
In teletext mode, the colour buttons allow you to
access directly an item or corresponding pages.
As Personal Zapping buttons, you can surf up to
10 personal channels for each button. For detailed
description of functions, refer to section on
“Personal Zapping ”.
–
“ Teletext buttons
0
Allows you to access teletext information. For
detailed description of functions, refer to section
on“Using theTeletext”
1
2
‘ Smiley button
Allows to add and store your personal preference
channels in your Personal Preference list. For detailed
description of functions, refer to section on “Using your
Personal Zapping feature”.
( Timer Button
Not applicable.
§ Smart Sound Button
Press the Smart Sound button repeatedly to access 4
different types of sound settings and choose your desired
setting.
è Menu Button
Displays the main menu.Also exits menu from screen.
! Cursor Up Button
Allows you to select the next item on the menu.
ç Cursor Left Button
Allows you to select the sub-menus and adjust the settings.
0 Volume + / – Button
Increases or decreases volume.
1 4
Allows you to switch from Stereo to Mono sound during
stereo transmission or to choose between language5or
language6during dual sound transmission.
2 A/CH(Alternate channel) Button
Allows you to change between the current
channel and the previous channel.
9
5-11_34PT4323/E
9
04/10/03, 5:33 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF REMOTE CONTROL
3 Main Index Button
In teletext mode, press button to return to the
main index page.
4 Frownie button
Allows to delete stored personal preference
channels in your Personal Preference list. For
detailed description of functions, refer to section on
“Personal Zapping ”.
3
4
5
5 Smart Picture Button
Press the Smart Picture button repeatedly to access
5 different types of picture settings and choose
your desired setting.
6
7
61Incredible Surround Button
8
9
–
Allows you to select Incredible Surround sound when
transmission is in stereo mode.
–
Allows you to select Spatial Sound when transmission
20
21
22
is in mono mode.
71Cursor Right Button
Allows you to access the sub-menus and adjust the
settings.
8 Cursor Down Button
Allows you to select the next item on the menu.
9 Channel + / – Buttons
23
Allows you to select channels in ascending or
descending order.
20 Mute Button
Mutes sound.To restore sound, press button again.
21 Teletext Button
24
25
Refer to section on “Using theTeletext”
22 OSD button
Allows you to display the current channel number.
It also allows to exit menu from the screen after
control adjustments.
23 Digit (0 -9) Buttons
Press to select a channel. For a 2-digit channel
number, press the first digit and followed
immediately by the second digit.
24 A/V Button
Allows you to select the AV channels.
25 Sleeptimer Button
Allows you to select a time period after which the
set will switch to standby mode automatically.
10
5-11_34PT4323/E
10
03/04/03, 5:34 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF TV CONTROLS
6
4
5
7
2
3
1
1
2
3
Mains Power button
Switch mains power on or off.
Standby Light indicator
Remote Sensor
Indicate red light when standby mode is activated.
Acts as a sensor for activating the controls of theTV
when remote control handset is aimed at it.
A
4
5
6
7
Volume
Volume
button
Adjust sound volume softer.
Adjust sound volume louder.
Select channel in ascending order.
A
button
Programme button
Programme button
Select channel in descending order.
Note
• You can enter the main menu by pressing both
A
A
the Volume
and
buttons at the same time.
• Press the Programme or button to select the
next item on the menu.
• Press the Volume
A
A
or
button to access the
sub-menus and adjust the settings.
11
5-11_29PT5307_E
11
09/20/04, 2:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE MENU LANGUAGE
Operating instructions generally explains the operation of theTV
set using the buttons on the remote control unless otherwise stated.
Please read the following instructions carefully and follow the steps
as shown to familiarise yourself with the installations and all features
available in your set.
Note:When there is no signal input to theTV, you may encounter instability of the
on screen display. In this instance, please use the v button on your remote
control to select an AV channel.
The Language feature allows you to set theTV’s on-screen menu to be shown in your
desired language.
Step
Press button
Result on screen
Main
✔ Picture
o
π
MENU
Enter main menu.
Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
■
■
■
Sound
Features
Install
œ
¸
Main
o
Select Install.
■
■
■
Picture
Sound
Features
Language
Auto Store
Manual Store
Channel Edit
✔ Install
π
œ
Install
✔ Language
o
˙
˙
Enter the Install menu.
English
π
■
■
■
Auto Store
Manual store
Channel Edit
Press button repeatedly to cycle
through the language list and
œ
select the language of your choice.
m
Exit menu from screen.
12
12-18/E
12
01/15/03, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOMATIC TUNING OF CHANNELS
Automatic tuning of channels allows you to store each programme automatically.
Step
Press button
Result on screen
Enter main menu.
Main
✔ Picture
o
π
MENU
Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
■
■
■
Sound
Features
Install
œ
o
Main
Press button repeatedly until
Install is selected.
■
■
■
Picture
Sound
Features
Language
¸
Auto Store
Manual Store
Channel Edit
✔ Install
π
œ
Install
✔ Language
o
Enter install menu.
˙
π English
■
■
■
Auto Store
Manual store
Channel Edit
œ
o
Install
Select Auto Store.
■
Language
¸
✔ Auto Store
π
■
Manual store
■
Channel Edit
œ
Auto Store
■
Channel
TV
1
Start automatic tuning of
channels.
˙
■
142 MHz
♦♦♦♦♦♦♦♦♦♦♦♦♦♦π♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
Install
o
œ
■
Language
✔ Auto Store
π
■
Manual store
■
Channel Edit
When tuning is completed,
exit menu from screen.
m
13
12-18/E
13
01/15/03, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL TUNING OF CHANNELS
Manual tuning of channels allows you to select your preferred channel number for every
available programme.
Step
Press button
Result on screen
Main
✔ Picture
o
π
Enter main menu.
MENU
Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
■
■
■
Sound
Features
Install
œ
o
Main
Press button repeatedly until
Install is selected.
■
■
■
Picture
Sound
Features
Language
¸
Auto Store
Manual Store
Channel Edit
✔ Install
π
œ
Install
o
✔ Language
π
English
Enter install menu.
■
■
■
Auto Store
Manual Store
Channel Edit
˙
œ
Install
o
■
Language
Auto Store
Colour System
Sound System
■
Press button repeatedly until
Manual Store is selected.
Manual Store π Search
✔
■
¸
Channel Edit
Channel
Fine Tune
Store
œ
Manual Store
o
Enter manual store menu.
˙
■
Colour System
■
Sound System
Search
Channel
79 MHzπ
✔
■
Press button repeatedly until
Search is selected.
■
■
Fine Tune
Store
¸
œ
MANUAL TUNING OF
14
12-18/E
14
01/15/03, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL TCUNHIANNGNOELFSCHANNELS
Step
Press button
Result on screen
Start manual searching. Searching
stops once a transmitting signal is
found.
Manual Store
o
˙
■
Colour System
Sound System
Search
■
128 MHzπ
✔
■
Channel
■
■
Fine Tune
Store
œ
¸
Select Channel.
Manual Store
o
■
■
■
Colour System
Sound System
Search
Channel
Fine Tune
Store
Key in the channel number.
2
5
8
0
1
4
7
3
6
9
9
2
π
✔
■
■
œ
Press button repeatedly until
Store is selected.
10
¸
Manual Storeo
■
■
■
■
■
Colour System
Sound System
Search
Channel
Fine Tune
Store
Store?π
✔
œ
Store tuned channel.
Note : If you want to
continue searching for
another transmitting
channel, repeat steps
7 to 11.
11
12
˙
Manual Storeo
■
■
■
■
■
Colour System
Sound System
Search
Channel
Fine Tune
Store
Stored
✔
œ
m
Exit menu from screen.
15
12-18/E
15
01/15/03, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE COLOUR/SOUND SYSTEM
This feature allows you to select your desired Colour and Sound system. If Auto
is selected, the respective colour and sound system will be automatically selected according
to the transmission system. Note : Select your desired colour and sound system manually if
reception is poor at Auto mode.
Step
Press button
Result on screen
Repeat step 1
to step 5 as in
“ManualTuning
ofTV Channels”
Colour System is selected.
Manual Store
o
Colour System
Sound System
Search
Auto π
✔
■
■
■
■
■
Channel
Fine Tune
Store
œ
o
Manual Store
Select the desired colour
system (Auto, PAL,
NTSC 3.58, NTSC 4.43
or SECAM).
˝
Colour System
PAL
π
✔
■
■
■
■
■
Sound System
Search
Channel
Fine Tune
Store
or
˙
œ
o
Manual Store
Press button repeatedly
until STORE is selected.
¸
■
Colour System
Sound System
Search
✔
■
■
■
■
Channel
Fine Tune
Store
˙
Store selected system.
Stored
œ
o
Proceed to select Sound
System.
Manual Store
¸
or
˚
9
■
Colour System
Sound System
Search
Auto
π
✔
■
■
■
■
Channel
Fine Tune
Store
œ
o
Select the desired sound
system (Auto,BG, I,
DK or M.
Manual Store
˝
10
■
Colour System
Sound System
Search
or
DK
π
✔
■
˙
■
■
■
Channel
Fine Tune
Store
œ
o
Manual Store
■
Colour System
Sound System
Search
Channel
Fine Tune
Store
11
12
¸
˙
Press button repeatedly
until STORE is selected.
✔
■
■
■
■
Stored
Store selected system.
œ
Exit menu from screen.
m
16
12-18/E
16
01/15/03, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FINE TUNING OF CHANNELS
This feature allows you to adjust picture reception in areas of weak reception.
Step
Press button
Result on screen
Enter main menu.
Main
✔ Picture
o
π
MENU
Brightness
Color
Contrast
Sharpness
Colour Temp.
More...
■
■
■
Sound
Features
Install
œ
o
Main
¸
Press button repeatedly until
Install is selected.
■
■
■
Picture
Sound
Features
Language
Auto Store
Manual Store
Channel edit
✔ Install
π
œ
Install
o
Enter install menu.
■
Language
Colour System
Sound System
π Search
Channel
Fine Tune
Store
˙
■
Auto Store
Manual Store
Channel Edit
✔
■
Press button repeatedly until
Manual Store is selected.
¸
œ
Manual Storeo
■
■
■
■
Colour System
Sound System
Search
Enter manual store menu.
˙
Channel
Press button repeatedly until
FineTune is selected.
¸
✓ Fine Tune
Store
p
❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘❘❘❘❘❘π
❘❘
■
œ
Manual Storeo
■
■
■
■
Colour System
Sound System
Search
Fine tune until the best reception
is obtained.
˙
or
Channel
˝
✓ Fine Tune
Store
p
❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘π
❘❘
■
œ
¸
Manual Storeo
Select Store.
■
■
■
■
■
Colour System
Sound System
Search
Channel
Fine Tune
Store
Store last fine-tuned status.
˙
9
Stored
✔
œ
10
Exit menu from screen.
17
12-18_29/34PT4323/E
17
05/13/03, 3:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING OF CHANNELS
This feature allows you to skip or edit channels which have bad or weakTV signal or channels
that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by
the CH (Channel) + or – button.You can only have access to the channel by the Digit (0 -9)
buttons.
Step
Press button
Result on screen
Enter main menu.
MENU
Main
o
■
■
■
Picture
Sound
Features
Language
Auto Store
Manual Store
Channel Edit
Press button repeatedly until
Install is selected.
✔ Install
π
œ
¸
Install
o
˙
■
■
■
Language
Auto Store
Manual Store
Channel
Skipped
Enter install menu.
Channel Editπ
¸
Press button repeatedly until
✔
Channel Edit is selected.
œ
Enter Channel Edit menu.
˙
Channel Edit
o
Channel
Skipped
2
π
✔
■
2
5
8
0
1
4
7
3
6
9
Key in the channel number to be
skipped.
œ
o
Channel Edit
■
Channel
Skipped
Select Skipped.
¸
On
✔
Select On to skip channel.
˙
œ
Exit menu from screen.
9
HOW TO RESTORE SKIPPED CHANNELS
• Repeat Steps 1 to 5 as in”Editing of Channels”.
• Key in the channel number to be restored by the
Digit (0 - 9) button.
Channel Edit
o
œ
■
Channel
Skipped
Off
✔
• Select Skipped by the
• Select Off to restore channel by the
• Exit menu from screen by the button.
¸
button.
button.
˙
18
12-18_29/34PT4323/E
18
05/13/03, 3:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE TV PICTURE
The picture menu allows you to make adjustments to the picture.
Step
Press button
Result on screen
Display the main menu on screen.
MENU
Main
✔ Picture
o
π Brightness
Colour
■
■
■
Sound
Features
Install
Contrast
Sharpness
Colour Temp
More...
Picture
✔ Brightnessp❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘❘❘❘❘❘59π
o
Enter Picture menu.
˙
❘
■
■
■
■
■
Colour
Contrast
Sharpness
Colour Temp
NR
Select item.
˚
or
¸
Picture
✔ Colour
o
Adjust level or select desired
setting.
p❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘❘❘❘❘❘59π
❘
˝
■
■
■
■
■
Contrast
Sharpness
Colour Temp
NR
or
˙
Contrast +
œ
Exit menu from screen.
m
Picture menu items
Brightness
Activities
Increase or decrease brightness level.
Increase or decrease color level.
Increase or decrease contrast level.
Colour
Contrast
Sharpness
Increase or decrease sharpness level to improve detail
in picture.
Colour temperature
Choose from 3 settings (Normal,Warm or Cool).
NR (Noise Reduction)
Select “On” to reduce “noisy” picture (little dots on
picture) due to weak signal.
Contrast +
Select “On” to allow you to optimise the total contrast
for improved picture quality.
19
19-20/E
19
01/15/03, 5:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE TV SOUND
The sound menu allows you to make adjustments to the sound.
Step Press button
Result on screen
Display the main menu on screen.
Main
✔ Picture
o
MENU
π Brightness
Colour
■
■
■
Sound
Features
Install
Contrast
Sharpness
Colour Temp.
More...
œ
Main
Picture
o
Select Sound menu.
¸
■
Treble
Sound
Features
Install
π Bass
Balance
AVL
✔
■
■
Incr. Surround
Ultra Bass
œ
Enter Sound menu.
˙
Sound
✔ Treble
o
p❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘❘❘❘❘❘0π
❘
■
■
■
■
■
Bass
Balance
AVL
Incr. Surround
Ultra Bass
œ
Select item.
˚
or
¸
Adjust level or select desired
setting.
˝
or
˙
m
Exit menu from screen.
Sound menu items
Activities
Treble
Increase or decrease high frequency level.
Increase or decrease low frequency level.
Increase or decrease to adjust balance level.
Select On to enable volume to remain at a pre-
Bass
Balance
AVL (AutoVolume Leveller)
determined level should there be a sudden change in
volume during commercial breaks or channel switching.
Incredible Surround
Select On to boost the effect of stereo sound.
Ultra Bass
Select On to enjoy enhanced bass output.
20
19-20/E
20
01/15/03, 5:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ROTATION (FOR CERTAIN VERSIONS ONLY)
Due to the earth’s magnetic field and position of theTV, there may be a slight tilting of the
picture to the left or right when the set is switched on.When this phenomena accurs, select
Rotation in the Features menu and adjust accordingly.
Step
Press button
Result on screen
Display the main menu on screen.
MENU
Main
✔ Picture
o
π Brightness
Colour
■
■
■
Sound
Features
Install
Contrast
Sharpness
Colour Temp.
More...
œ
¸
Select Features.
Main
o
■
Picture
Sound
Rotation
Format
■
✔ Features
Install
π
œ
Signal Strength
Active Control
■
Enter the Features menu.
˙
Select Rotation.
Features
✔ Rotation
o
¸
p
❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘❘❘❘❘❘0π
❘❘
■
■
■
Format
Signal strength
Active Control
œ
Press repeatedly until you deem
picture is in the normal position.
Features
✔ Rotation
o
˙
p
❘❘❘❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘40π
❘❘
or
■
■
■
Format
Signal strength
Active Control
˝
œ
Exit menu from screen.
21
21-24_29PT5307/E
21
10/27/03, 9:51 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SCREEN FORMAT
You can have a choice of two formats for your viewing pleasure, namely : - 4:3 mode and the
EXPAND 4:3 mode through the FORMAT menu.
Step
Press button
Result on screen
MENU
Display the main menu on screen.
Main
o
π
■
Picture
Sound
Rotation
Format
Signal Strength
Active Control
■
Press button repeatedly until
Features is selected.
✔ Features
Install
¸
■
Feature
o
Enter the Features menu.
˙
■
Rotation
✔ Format
4:3
π
■
Signal strength
Active Control
Press button repeatedly until
Format is selected.
¸
■
o
Press the button repeatedly to
cycle through the different formats
(4:3 or Expand 4:3) or and select
your desired format.
Features
˙
m
■
Rotation
✔ Format
■
4:3 Expandπ
Signal Strength
Active control
■
œ
Exit menu from screen.
When to use the Screen Formats
4:3 format
Select the 4:3 format if you want to
display the 4:3 picture using the full
surface of the screen.
Expand 4:3 format
Select the Expand 4:3 format if you
want to expand movie images
recorded in the letterbox format.
When this format is selected, the
black horizontal bars at the top and
bottom are expanded thus filling
up the entireTV screen.
➩
22
21-24_34PT4323/E
22
04/15/03, 5:20 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE SIGNAL STRENGTH
The Signal Strength feature allows to view the signal strength level when the On option is
selected.The signal strength level will be indicated at the bottom of the screen whenever you
switch channel.
Step
Press button
Result on screen
Display the main menu on screen.
MENU
Main
o
π
■
Picture
Sound
Rotation
Format
Signal Strength
Active Control
■
✔ Features
Install
Press button repeatedly until
Signal Strength is selected.
■
¸
œ
Press the button to select On
option to activate the Signal Strength
mode.
Feature
o
˙
■
Rotation
Format
■
✔
■
Signal strength
Active Control
Off
Note : When signal strength is poor, you can proceed to the
Active Control feature in the Feature menu and select On
option to automatically adjust settings for optimal picture
quality (Refer to section on “Using the Active Control”).
œ
Feature
o
■
Rotation
Format
■
✔
■
Signal strength
Active Control
On
œ
23
21-24_34PT4323/E
23
04/10/03, 5:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ACTIVE CONTROL
This feature automatically adjust settings for optimal picture quality continuously under any
signal conditions.To activate the Active Control feature, select the “ON” option in the Active
Control menu.
Step
Press button
Result on screen
Display the main menu on screen.
Main
o
π
MENU
■
Picture
Sound
Rotation
Fprmat
Signal Strength
Active Control
■
✔ Features
Install
¸
■
Press button repeatedly until
Features is selected.
Feature
o
˙
Enter the Features menu.
■
Rotation
Format
■
■
Signal strength
Active Control
¸
Press button repeatedly until
✔
Off
Active control is selected.
œ
Press the button to select On option
to activate Active Control mode.
If Display On option is selected, the
settings of Brightness, Contrast,
Sharpness, Contrast + and
Noise Reduction will be displayed
on the screen when the set is
switched on or when you switch to
another channel.
˙
Feature
o
■
Rotation
Format
■
■
Signal strength
Active Control
✔
On
œ
24
21-24_34PT4323/E
24
04/10/03, 5:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SMART PICTURE CONTROL
Whether you are watching a movie or video game, yourTV has automatic video control
settings matched to your current program source or content.The Smart Picture feature quickly
resets yourTV’s video controls of program for a number of different types of programs and
viewing conditions you may have in your home. Each Smart Picture setting is preset at the
factory to automatically adjust theTV’s Brightness, Colour, Picture and Sharpness levels.
Step
Press button
Press botton repeatedly to cycle through the 5 settings namely,
Personal, DVD/VCD, Rich, Natural and Soft and select
your desired picture setting.
`
m
Exit menu from screen.
Defintion of Picture Settings
Personal
Personal
:
:
Picture settings are set to your preference.
DVD/VCD
For optimal picture setting, whenever
the source is connected to DVD/VCD
player, select DVD/VCD setting for AV
mode.
DVD/VCD
Rich
:
Emphasize very vibrant colours.This
setting is the optimal setting when you
are viewingTV programmes in a
brightly-lit room.
Rich
Natural
Soft
:
:
Emphasize original colours.
Emphasize “warm” colours.
(Suitable for dimly-lit room condition and
givescinema-like effect when light is
switched off).
Natural
Soft
25
25-29_34PT4323/E
25
04/10/03, 5:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SMART SOUND CONTROL
Whether you are watching a movie or video game, yourTV has automatic sound control
settings matched to your current program source or content.The Smart Sound feature quickly
resets yourTV’s sound controls of program for a number of different types of programs and
viewing conditions you may have in your home. Each Smart Sound setting is preset at the
factory to automatically adjust theTV’sTreble and Bass levels.
Step
Press button
Press botton repeatedly to cycle through the 4 settings namely,
q
Personal, Theatre, Music and Voice and select your desired
sound setting.
Exit menu from screen.
m
Definition of Sound Settings
Personal : Sound settings are set to your preference.
Personal
Theatre : Emphasize sensation to action.
(Bass andTreble boosted)
Theatre
Music
Music
Voice
: Emphasize low tone (Bass boosted).
: Emphasize high tone (treble boosted).
Voice
26
25-29_34PT4323/E
26
04/10/03, 5:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
PERSONAL ZAPPING
A list or series of favouriteTV programs can be selected and stored in the 4 coloured buttons
with the Personal Zapping feature.With this feature you can easily viewed up to a total of 10
preferred channels for each coloured button.
Adding Channels to the Favourite list
Step
Press button
Result on screen
2
5
8
0
1
4
7
3
6
9
Select a channel by the Digit
buttons
8
8
{ Select List!
Press button to display list.
Choose your favourite colour
button to store selected channel.
{ 8
Added!
Repeat steps 1 to 3 to add and
store your avourite channels to
the list.
m
Exit menu from screen.
To view through the favourite list
Press the colour button that you
have selected.
Press button repeatedly to cycle
through your favourite list
and view your favourite channel.
Deleting Channels from the Favourite list
Select a colour button and press
button repeatedly to select the
channel you want to delete.
{ 8
{Remove Item?- Press
|
{ 8
Press button to display list.
Press button to remove item.
Repeat steps 1 to 3 to delete
more channels from list.
m
Exit menu from screen.
27
25-29_34PT4323/E
27
04/10/03, 5:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TELETEXT
If aTV channel broadcast contains teletext information, each channel that broadcasts
teletext transmits a page (index page) with information on how to use the teletext system,
usually on page 100.The system transmitted is indicated in the option line at the bottom
of the screen.
Result on screen
Press button
& On/Off teletext
Press the button once to switch on
‘
“
and Superimpose teletext display. (A channel in which
teletext page
overTV
programme
teletext is being transmitted must be
selected).
Press the button the second time
superimpose the teletext page over
theTV programme.
(
&
b
Press the button the third time
to exit teletext mode.
é Selecting a
Key in the required teletext page
(3 digits).The page number is
teletext page
displayed at the top left hand corner
of the screen. When the teletext
page is located, the counter stops
searching. If the counter keeps
searching, it means that the page is
not available for selection. If you
make a mistake in keying the page
number, you have to complete
keying the 3-digit number before
re-keying the correct page number.
2
5
8
0
1
4
7
3
6
9
é
˚
“ Accessing
a teletext
page
Press the
button to
display the next page and the
¸
button to display the previous
page.
˚
¸
‘ Direct Access to The 4-colour buttons allow you to
an item or
corresponding
pages
access directly an item or
corresponding pages.
( Main Index
Press the button to return to the
main index page.
d
28
25-29_34PT4323/E
28
04/10/03, 5:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TELETEXT
Result on screen
Press button
§ Interrupt
Press the button to change toTV
mode. Press the button again to
return to teletext mode and to the
teletext page.
!
ç
§
è
a
è Enlarge
Press the button once to enlarge
and view the top half of the page.
Press the button the second time
to enlarge and view the bottom
half of the page. Press the button
the third time to return to normal
size page.
h
! Hold
A selected page sometimes
contains a few sub-pages.The sub-
page will automatically move to the
next sub-page after about 20
seconds.The total number of sub-
pages are indicated at the top right
hand corner of the screen. Press
the button once to hold page and
the second time to release holding
of page.
f
ç Reveal/
Press the button once to reveal
hidden information (solutions to
puzzles, riddles, etc). Press the
button the second time to conceal
information.
Conceal
e
This button is applicable only to
teletext page with puzzles, riddles,
etc.)
29
25-29_34PT4323/E
29
04/10/03, 5:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
29PT5307
29PT5308
Picture tube screen size
Picture tube visible area
720 mm
680 mm
Audio Output :
Speaker
2 x 10 W
TV System
NTSC M
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
Playback System
NTSC 3.58, NTSC 4.43, PAL 60
Set Dimensions :
Width
Depth
787 mm
500 mm
590 mm
Height
NetWeight of Set (approximate )
45 kg
Note
For OperatingVoltage, Frequency, Power Consumption andVersion Number, refer to the
type number at the rear of the set.
30
30-31_29PT5307_E
30
09/20/04, 2:52 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
3141 055 23271
30-31_29PT5307_E
31
09/20/04, 2:52 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|